Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 176 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c
new file mode 100644
index 000000000..54e410921
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_spi.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2013 Cypress Semiconductor
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+
+#define CY_SPI_WR_OP		0x00 /* r/~w */
+#define CY_SPI_RD_OP		0x01
+#define CY_SPI_CMD_BYTES	4
+#define CY_SPI_SYNC_BYTE	2
+#define CY_SPI_SYNC_ACK1	0x62 /* from protocol v.2 */
+#define CY_SPI_SYNC_ACK2	0x9D /* from protocol v.2 */
+#define CY_SPI_DATA_SIZE	128
+#define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
+#define CY_SPI_BITS_PER_WORD	8
+
+static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
+			   u8 op, u16 reg, u8 *buf, int length)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u8 *wr_buf = &xfer_buf[0];
+	u8 *rd_buf = &xfer_buf[CY_SPI_DATA_BUF_SIZE];
+	int retval;
+	int i;
+
+	if (length > CY_SPI_DATA_SIZE) {
+		dev_err(dev, "%s: length %d is too big.\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
+	memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE);
+
+	wr_buf[0] = 0x00; /* header byte 0 */
+	wr_buf[1] = 0xFF; /* header byte 1 */
+	wr_buf[2] = reg;  /* reg index */
+	wr_buf[3] = op;   /* r/~w */
+	if (op == CY_SPI_WR_OP)
+		memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+
+	memset(xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	/*
+	  We set both TX and RX buffers because Cypress TTSP
+	  requires full duplex operation.
+	*/
+	xfer[0].tx_buf = wr_buf;
+	xfer[0].rx_buf = rd_buf;
+	switch (op) {
+	case CY_SPI_WR_OP:
+		xfer[0].len = length + CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+		break;
+
+	case CY_SPI_RD_OP:
+		xfer[0].len = CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+
+		xfer[1].rx_buf = buf;
+		xfer[1].len = length;
+		spi_message_add_tail(&xfer[1], &msg);
+		break;
+
+	default:
+		dev_err(dev, "%s: bad operation code=%d\n", __func__, op);
+		return -EINVAL;
+	}
+
+	retval = spi_sync(spi, &msg);
+	if (retval < 0) {
+		dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+			__func__, retval, xfer[1].len, op);
+
+		/*
+		 * do not return here since was a bad ACK sequence
+		 * let the following ACK check handle any errors and
+		 * allow silent retries
+		 */
+	}
+
+	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 ||
+	    rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) {
+		dev_dbg(dev, "%s: operation %d failed\n", __func__, op);
+
+		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
+			dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n",
+				__func__, i, rd_buf[i]);
+		for (i = 0; i < length; i++)
+			dev_dbg(dev, "%s: test buf[%d]:0x%02x\n",
+				__func__, i, buf[i]);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
+				      u16 addr, u8 length, void *data)
+{
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
+			length);
+}
+
+static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
+				       u16 addr, u8 length, const void *data)
+{
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
+			length);
+}
+
+static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.write		= cyttsp_spi_write_block_data,
+	.read		= cyttsp_spi_read_block_data,
+};
+
+static int cyttsp_spi_probe(struct spi_device *spi)
+{
+	struct cyttsp *ts;
+	int error;
+
+	/* Set up SPI*/
+	spi->bits_per_word = CY_SPI_BITS_PER_WORD;
+	spi->mode = SPI_MODE_0;
+	error = spi_setup(spi);
+	if (error < 0) {
+		dev_err(&spi->dev, "%s: SPI setup error %d\n",
+			__func__, error);
+		return error;
+	}
+
+	ts = cyttsp_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
+			  CY_SPI_DATA_BUF_SIZE * 2);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	spi_set_drvdata(spi, ts);
+
+	return 0;
+}
+
+static struct spi_driver cyttsp_spi_driver = {
+	.driver = {
+		.name	= CY_SPI_NAME,
+		.pm	= &cyttsp_pm_ops,
+	},
+	.probe  = cyttsp_spi_probe,
+};
+
+module_spi_driver(cyttsp_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("spi:cyttsp");