Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 283 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
new file mode 100644
index 000000000..83ac8c128
--- /dev/null
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for EETI eGalax Multiple Touch Controller
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * based on max11801_ts.c
+ */
+
+/* EETI eGalax serial touch screen controller is a I2C based multiple
+ * touch screen controller, it supports 5 point multiple touch. */
+
+/* TODO:
+  - auto idle mode support
+*/
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/input/mt.h>
+#include <linux/of_gpio.h>
+
+/*
+ * Mouse Mode: some panel may configure the controller to mouse mode,
+ * which can only report one point at a given time.
+ * This driver will ignore events in this mode.
+ */
+#define REPORT_MODE_MOUSE		0x1
+/*
+ * Vendor Mode: this mode is used to transfer some vendor specific
+ * messages.
+ * This driver will ignore events in this mode.
+ */
+#define REPORT_MODE_VENDOR		0x3
+/* Multiple Touch Mode */
+#define REPORT_MODE_MTTOUCH		0x4
+
+#define MAX_SUPPORT_POINTS		5
+
+#define EVENT_VALID_OFFSET	7
+#define EVENT_VALID_MASK	(0x1 << EVENT_VALID_OFFSET)
+#define EVENT_ID_OFFSET		2
+#define EVENT_ID_MASK		(0xf << EVENT_ID_OFFSET)
+#define EVENT_IN_RANGE		(0x1 << 1)
+#define EVENT_DOWN_UP		(0X1 << 0)
+
+#define MAX_I2C_DATA_LEN	10
+
+#define EGALAX_MAX_X	32760
+#define EGALAX_MAX_Y	32760
+#define EGALAX_MAX_TRIES 100
+
+struct egalax_ts {
+	struct i2c_client		*client;
+	struct input_dev		*input_dev;
+};
+
+static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
+{
+	struct egalax_ts *ts = dev_id;
+	struct input_dev *input_dev = ts->input_dev;
+	struct i2c_client *client = ts->client;
+	u8 buf[MAX_I2C_DATA_LEN];
+	int id, ret, x, y, z;
+	int tries = 0;
+	bool down, valid;
+	u8 state;
+
+	do {
+		ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN);
+	} while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES);
+
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	if (buf[0] != REPORT_MODE_MTTOUCH) {
+		/* ignore mouse events and vendor events */
+		return IRQ_HANDLED;
+	}
+
+	state = buf[1];
+	x = (buf[3] << 8) | buf[2];
+	y = (buf[5] << 8) | buf[4];
+	z = (buf[7] << 8) | buf[6];
+
+	valid = state & EVENT_VALID_MASK;
+	id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET;
+	down = state & EVENT_DOWN_UP;
+
+	if (!valid || id > MAX_SUPPORT_POINTS) {
+		dev_dbg(&client->dev, "point invalid\n");
+		return IRQ_HANDLED;
+	}
+
+	input_mt_slot(input_dev, id);
+	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down);
+
+	dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d",
+		down ? "down" : "up", id, x, y, z);
+
+	if (down) {
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, z);
+	}
+
+	input_mt_report_pointer_emulation(input_dev, true);
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+/* wake up controller by an falling edge of interrupt gpio.  */
+static int egalax_wake_up_device(struct i2c_client *client)
+{
+	struct device_node *np = client->dev.of_node;
+	int gpio;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
+	if (!gpio_is_valid(gpio))
+		return -ENODEV;
+
+	ret = gpio_request(gpio, "egalax_irq");
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"request gpio failed, cannot wake up controller: %d\n",
+			ret);
+		return ret;
+	}
+
+	/* wake up controller via an falling edge on IRQ gpio. */
+	gpio_direction_output(gpio, 0);
+	gpio_set_value(gpio, 1);
+
+	/* controller should be waken up, return irq.  */
+	gpio_direction_input(gpio);
+	gpio_free(gpio);
+
+	return 0;
+}
+
+static int egalax_firmware_version(struct i2c_client *client)
+{
+	static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 };
+	int ret;
+
+	ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int egalax_ts_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct egalax_ts *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	ts = devm_kzalloc(&client->dev, sizeof(struct egalax_ts), GFP_KERNEL);
+	if (!ts) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	ts->client = client;
+	ts->input_dev = input_dev;
+
+	/* controller may be in sleep, wake it up. */
+	error = egalax_wake_up_device(client);
+	if (error) {
+		dev_err(&client->dev, "Failed to wake up the controller\n");
+		return error;
+	}
+
+	error = egalax_firmware_version(client);
+	if (error < 0) {
+		dev_err(&client->dev, "Failed to read firmware version\n");
+		return error;
+	}
+
+	input_dev->name = "EETI eGalax Touch Screen";
+	input_dev->id.bustype = BUS_I2C;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0);
+	input_set_abs_params(input_dev,
+			     ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0);
+	input_set_abs_params(input_dev,
+			     ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0);
+	input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);
+
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					  egalax_ts_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "egalax_ts", ts);
+	if (error < 0) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+
+	error = input_register_device(ts->input_dev);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct i2c_device_id egalax_ts_id[] = {
+	{ "egalax_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, egalax_ts_id);
+
+static int __maybe_unused egalax_ts_suspend(struct device *dev)
+{
+	static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = {
+		0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0
+	};
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	if (device_may_wakeup(dev))
+		return enable_irq_wake(client->irq);
+
+	ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN);
+	return ret > 0 ? 0 : ret;
+}
+
+static int __maybe_unused egalax_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(dev))
+		return disable_irq_wake(client->irq);
+
+	return egalax_wake_up_device(client);
+}
+
+static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
+
+static const struct of_device_id egalax_ts_dt_ids[] = {
+	{ .compatible = "eeti,egalax_ts" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, egalax_ts_dt_ids);
+
+static struct i2c_driver egalax_ts_driver = {
+	.driver = {
+		.name	= "egalax_ts",
+		.pm	= &egalax_ts_pm_ops,
+		.of_match_table	= egalax_ts_dt_ids,
+	},
+	.id_table	= egalax_ts_id,
+	.probe		= egalax_ts_probe,
+};
+
+module_i2c_driver(egalax_ts_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller");
+MODULE_LICENSE("GPL");