Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 239 insertions, 0 deletions

diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c
new file mode 100644
index 000000000..d1f5740cd
--- /dev/null
+++ b/drivers/irqchip/irq-mxs.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *	Add Alphascale ASM9260 support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
+#include <asm/exception.h>
+
+#include "alphascale_asm9260-icoll.h"
+
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
+#define HW_ICOLL_VECTOR				0x0000
+#define HW_ICOLL_LEVELACK			0x0010
+#define HW_ICOLL_CTRL				0x0020
+#define HW_ICOLL_STAT_OFFSET			0x0070
+#define HW_ICOLL_INTERRUPT0			0x0120
+#define HW_ICOLL_INTERRUPTn(n)			((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE			BIT(2)
+#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
+
+#define ICOLL_NUM_IRQS		128
+
+enum icoll_type {
+	ICOLL,
+	ASM9260_ICOLL,
+};
+
+struct icoll_priv {
+	void __iomem *vector;
+	void __iomem *levelack;
+	void __iomem *ctrl;
+	void __iomem *stat;
+	void __iomem *intr;
+	void __iomem *clear;
+	enum icoll_type type;
+};
+
+static struct icoll_priv icoll_priv;
+static struct irq_domain *icoll_domain;
+
+/* calculate bit offset depending on number of interrupt per register */
+static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit)
+{
+	/*
+	 * mask lower part of hwirq to convert it
+	 * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3)
+	 */
+	return bit << ((d->hwirq & 3) << 3);
+}
+
+/* calculate mem offset depending on number of interrupt per register */
+static void __iomem *icoll_intr_reg(struct irq_data *d)
+{
+	/* offset = hwirq / intr_per_reg * 0x10 */
+	return icoll_priv.intr + ((d->hwirq >> 2) * 0x10);
+}
+
+static void icoll_ack_irq(struct irq_data *d)
+{
+	/*
+	 * The Interrupt Collector is able to prioritize irqs.
+	 * Currently only level 0 is used. So acking can use
+	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
+	 */
+	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
+			icoll_priv.levelack);
+}
+
+static void icoll_mask_irq(struct irq_data *d)
+{
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
+}
+
+static void icoll_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(BM_ICOLL_INTR_ENABLE,
+			icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
+}
+
+static void asm9260_mask_irq(struct irq_data *d)
+{
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + CLR_REG);
+}
+
+static void asm9260_unmask_irq(struct irq_data *d)
+{
+	__raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq),
+		     icoll_priv.clear +
+		     ASM9260_HW_ICOLL_CLEARn(d->hwirq));
+
+	__raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE),
+			icoll_intr_reg(d) + SET_REG);
+}
+
+static struct irq_chip mxs_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = icoll_mask_irq,
+	.irq_unmask = icoll_unmask_irq,
+	.flags = IRQCHIP_MASK_ON_SUSPEND |
+		 IRQCHIP_SKIP_SET_WAKE,
+};
+
+static struct irq_chip asm9260_icoll_chip = {
+	.irq_ack = icoll_ack_irq,
+	.irq_mask = asm9260_mask_irq,
+	.irq_unmask = asm9260_unmask_irq,
+	.flags = IRQCHIP_MASK_ON_SUSPEND |
+		 IRQCHIP_SKIP_SET_WAKE,
+};
+
+asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
+{
+	u32 irqnr;
+
+	irqnr = __raw_readl(icoll_priv.stat);
+	__raw_writel(irqnr, icoll_priv.vector);
+	handle_domain_irq(icoll_domain, irqnr, regs);
+}
+
+static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	struct irq_chip *chip;
+
+	if (icoll_priv.type == ICOLL)
+		chip = &mxs_icoll_chip;
+	else
+		chip = &asm9260_icoll_chip;
+
+	irq_set_chip_and_handler(virq, chip, handle_level_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops icoll_irq_domain_ops = {
+	.map = icoll_irq_domain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static void __init icoll_add_domain(struct device_node *np,
+			  int num)
+{
+	icoll_domain = irq_domain_add_linear(np, num,
+					     &icoll_irq_domain_ops, NULL);
+
+	if (!icoll_domain)
+		panic("%pOF: unable to create irq domain", np);
+}
+
+static void __iomem * __init icoll_init_iobase(struct device_node *np)
+{
+	void __iomem *icoll_base;
+
+	icoll_base = of_io_request_and_map(np, 0, np->name);
+	if (IS_ERR(icoll_base))
+		panic("%pOF: unable to map resource", np);
+	return icoll_base;
+}
+
+static int __init icoll_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+
+	icoll_priv.type = ICOLL;
+
+	icoll_base		= icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= NULL;
+
+	/*
+	 * Interrupt Collector reset, which initializes the priority
+	 * for each irq to level 0.
+	 */
+	stmp_reset_block(icoll_priv.ctrl);
+
+	icoll_add_domain(np, ICOLL_NUM_IRQS);
+
+	return 0;
+}
+IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
+
+static int __init asm9260_of_init(struct device_node *np,
+			  struct device_node *interrupt_parent)
+{
+	void __iomem *icoll_base;
+	int i;
+
+	icoll_priv.type = ASM9260_ICOLL;
+
+	icoll_base = icoll_init_iobase(np);
+	icoll_priv.vector	= icoll_base + ASM9260_HW_ICOLL_VECTOR;
+	icoll_priv.levelack	= icoll_base + ASM9260_HW_ICOLL_LEVELACK;
+	icoll_priv.ctrl		= icoll_base + ASM9260_HW_ICOLL_CTRL;
+	icoll_priv.stat		= icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET;
+	icoll_priv.intr		= icoll_base + ASM9260_HW_ICOLL_INTERRUPT0;
+	icoll_priv.clear	= icoll_base + ASM9260_HW_ICOLL_CLEAR0;
+
+	writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE,
+			icoll_priv.ctrl);
+	/*
+	 * ASM9260 don't provide reset bit. So, we need to set level 0
+	 * manually.
+	 */
+	for (i = 0; i < 16 * 0x10; i += 0x10)
+		writel(0, icoll_priv.intr + i);
+
+	icoll_add_domain(np, ASM9260_NUM_IRQS);
+	set_handle_irq(icoll_handle_irq);
+
+	return 0;
+}
+IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);