Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1260 insertions, 0 deletions

diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
new file mode 100644
index 000000000..a4e854b9b
--- /dev/null
+++ b/drivers/misc/mei/hw-txe.c
@@ -0,0 +1,1260 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2013-2020, Intel Corporation. All rights reserved.
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ */
+
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+#include "client.h"
+#include "hbm.h"
+
+#include "mei-trace.h"
+
+#define TXE_HBUF_DEPTH (PAYLOAD_SIZE / MEI_SLOT_SIZE)
+
+/**
+ * mei_txe_reg_read - Reads 32bit data from the txe device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ *
+ * Return: register value
+ */
+static inline u32 mei_txe_reg_read(void __iomem *base_addr,
+					unsigned long offset)
+{
+	return ioread32(base_addr + offset);
+}
+
+/**
+ * mei_txe_reg_write - Writes 32bit data to the txe device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ * @value: the value to write
+ */
+static inline void mei_txe_reg_write(void __iomem *base_addr,
+				unsigned long offset, u32 value)
+{
+	iowrite32(value, base_addr + offset);
+}
+
+/**
+ * mei_txe_sec_reg_read_silent - Reads 32bit data from the SeC BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: register offset
+ *
+ * Doesn't check for aliveness while Reads 32bit data from the SeC BAR
+ *
+ * Return: register value
+ */
+static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw,
+				unsigned long offset)
+{
+	return mei_txe_reg_read(hw->mem_addr[SEC_BAR], offset);
+}
+
+/**
+ * mei_txe_sec_reg_read - Reads 32bit data from the SeC BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: register offset
+ *
+ * Reads 32bit data from the SeC BAR and shout loud if aliveness is not set
+ *
+ * Return: register value
+ */
+static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw,
+				unsigned long offset)
+{
+	WARN(!hw->aliveness, "sec read: aliveness not asserted\n");
+	return mei_txe_sec_reg_read_silent(hw, offset);
+}
+/**
+ * mei_txe_sec_reg_write_silent - Writes 32bit data to the SeC BAR
+ *   doesn't check for aliveness
+ *
+ * @hw: the txe hardware structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Doesn't check for aliveness while writes 32bit data from to the SeC BAR
+ */
+static inline void mei_txe_sec_reg_write_silent(struct mei_txe_hw *hw,
+				unsigned long offset, u32 value)
+{
+	mei_txe_reg_write(hw->mem_addr[SEC_BAR], offset, value);
+}
+
+/**
+ * mei_txe_sec_reg_write - Writes 32bit data to the SeC BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Writes 32bit data from the SeC BAR and shout loud if aliveness is not set
+ */
+static inline void mei_txe_sec_reg_write(struct mei_txe_hw *hw,
+				unsigned long offset, u32 value)
+{
+	WARN(!hw->aliveness, "sec write: aliveness not asserted\n");
+	mei_txe_sec_reg_write_silent(hw, offset, value);
+}
+/**
+ * mei_txe_br_reg_read - Reads 32bit data from the Bridge BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: offset from which to read the data
+ *
+ * Return: the byte read.
+ */
+static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw,
+				unsigned long offset)
+{
+	return mei_txe_reg_read(hw->mem_addr[BRIDGE_BAR], offset);
+}
+
+/**
+ * mei_txe_br_reg_write - Writes 32bit data to the Bridge BAR
+ *
+ * @hw: the txe hardware structure
+ * @offset: offset from which to write the data
+ * @value: the byte to write
+ */
+static inline void mei_txe_br_reg_write(struct mei_txe_hw *hw,
+				unsigned long offset, u32 value)
+{
+	mei_txe_reg_write(hw->mem_addr[BRIDGE_BAR], offset, value);
+}
+
+/**
+ * mei_txe_aliveness_set - request for aliveness change
+ *
+ * @dev: the device structure
+ * @req: requested aliveness value
+ *
+ * Request for aliveness change and returns true if the change is
+ *   really needed and false if aliveness is already
+ *   in the requested state
+ *
+ * Locking: called under "dev->device_lock" lock
+ *
+ * Return: true if request was send
+ */
+static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req)
+{
+
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	bool do_req = hw->aliveness != req;
+
+	dev_dbg(dev->dev, "Aliveness current=%d request=%d\n",
+				hw->aliveness, req);
+	if (do_req) {
+		dev->pg_event = MEI_PG_EVENT_WAIT;
+		mei_txe_br_reg_write(hw, SICR_HOST_ALIVENESS_REQ_REG, req);
+	}
+	return do_req;
+}
+
+
+/**
+ * mei_txe_aliveness_req_get - get aliveness requested register value
+ *
+ * @dev: the device structure
+ *
+ * Extract HICR_HOST_ALIVENESS_RESP_ACK bit from
+ * from HICR_HOST_ALIVENESS_REQ register value
+ *
+ * Return: SICR_HOST_ALIVENESS_REQ_REQUESTED bit value
+ */
+static u32 mei_txe_aliveness_req_get(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	u32 reg;
+
+	reg = mei_txe_br_reg_read(hw, SICR_HOST_ALIVENESS_REQ_REG);
+	return reg & SICR_HOST_ALIVENESS_REQ_REQUESTED;
+}
+
+/**
+ * mei_txe_aliveness_get - get aliveness response register value
+ *
+ * @dev: the device structure
+ *
+ * Return: HICR_HOST_ALIVENESS_RESP_ACK bit from HICR_HOST_ALIVENESS_RESP
+ *         register
+ */
+static u32 mei_txe_aliveness_get(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	u32 reg;
+
+	reg = mei_txe_br_reg_read(hw, HICR_HOST_ALIVENESS_RESP_REG);
+	return reg & HICR_HOST_ALIVENESS_RESP_ACK;
+}
+
+/**
+ * mei_txe_aliveness_poll - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Polls for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ *
+ * Return: 0 if the expected value was received, -ETIME otherwise
+ */
+static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	ktime_t stop, start;
+
+	start = ktime_get();
+	stop = ktime_add(start, ms_to_ktime(SEC_ALIVENESS_WAIT_TIMEOUT));
+	do {
+		hw->aliveness = mei_txe_aliveness_get(dev);
+		if (hw->aliveness == expected) {
+			dev->pg_event = MEI_PG_EVENT_IDLE;
+			dev_dbg(dev->dev, "aliveness settled after %lld usecs\n",
+				ktime_to_us(ktime_sub(ktime_get(), start)));
+			return 0;
+		}
+		usleep_range(20, 50);
+	} while (ktime_before(ktime_get(), stop));
+
+	dev->pg_event = MEI_PG_EVENT_IDLE;
+	dev_err(dev->dev, "aliveness timed out\n");
+	return -ETIME;
+}
+
+/**
+ * mei_txe_aliveness_wait - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Waits for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ *
+ * Return: 0 on success and < 0 otherwise
+ */
+static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	const unsigned long timeout =
+			msecs_to_jiffies(SEC_ALIVENESS_WAIT_TIMEOUT);
+	long err;
+	int ret;
+
+	hw->aliveness = mei_txe_aliveness_get(dev);
+	if (hw->aliveness == expected)
+		return 0;
+
+	mutex_unlock(&dev->device_lock);
+	err = wait_event_timeout(hw->wait_aliveness_resp,
+			dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+	mutex_lock(&dev->device_lock);
+
+	hw->aliveness = mei_txe_aliveness_get(dev);
+	ret = hw->aliveness == expected ? 0 : -ETIME;
+
+	if (ret)
+		dev_warn(dev->dev, "aliveness timed out = %ld aliveness = %d event = %d\n",
+			err, hw->aliveness, dev->pg_event);
+	else
+		dev_dbg(dev->dev, "aliveness settled after = %d msec aliveness = %d event = %d\n",
+			jiffies_to_msecs(timeout - err),
+			hw->aliveness, dev->pg_event);
+
+	dev->pg_event = MEI_PG_EVENT_IDLE;
+	return ret;
+}
+
+/**
+ * mei_txe_aliveness_set_sync - sets an wait for aliveness to complete
+ *
+ * @dev: the device structure
+ * @req: requested aliveness value
+ *
+ * Return: 0 on success and < 0 otherwise
+ */
+int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req)
+{
+	if (mei_txe_aliveness_set(dev, req))
+		return mei_txe_aliveness_wait(dev, req);
+	return 0;
+}
+
+/**
+ * mei_txe_pg_in_transition - is device now in pg transition
+ *
+ * @dev: the device structure
+ *
+ * Return: true if in pg transition, false otherwise
+ */
+static bool mei_txe_pg_in_transition(struct mei_device *dev)
+{
+	return dev->pg_event == MEI_PG_EVENT_WAIT;
+}
+
+/**
+ * mei_txe_pg_is_enabled - detect if PG is supported by HW
+ *
+ * @dev: the device structure
+ *
+ * Return: true is pg supported, false otherwise
+ */
+static bool mei_txe_pg_is_enabled(struct mei_device *dev)
+{
+	return true;
+}
+
+/**
+ * mei_txe_pg_state  - translate aliveness register value
+ *   to the mei power gating state
+ *
+ * @dev: the device structure
+ *
+ * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise
+ */
+static inline enum mei_pg_state mei_txe_pg_state(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	return hw->aliveness ? MEI_PG_OFF : MEI_PG_ON;
+}
+
+/**
+ * mei_txe_input_ready_interrupt_enable - sets the Input Ready Interrupt
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_input_ready_interrupt_enable(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	u32 hintmsk;
+	/* Enable the SEC_IPC_HOST_INT_MASK_IN_RDY interrupt */
+	hintmsk = mei_txe_sec_reg_read(hw, SEC_IPC_HOST_INT_MASK_REG);
+	hintmsk |= SEC_IPC_HOST_INT_MASK_IN_RDY;
+	mei_txe_sec_reg_write(hw, SEC_IPC_HOST_INT_MASK_REG, hintmsk);
+}
+
+/**
+ * mei_txe_input_doorbell_set - sets bit 0 in
+ *    SEC_IPC_INPUT_DOORBELL.IPC_INPUT_DOORBELL.
+ *
+ * @hw: the txe hardware structure
+ */
+static void mei_txe_input_doorbell_set(struct mei_txe_hw *hw)
+{
+	/* Clear the interrupt cause */
+	clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause);
+	mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_DOORBELL_REG, 1);
+}
+
+/**
+ * mei_txe_output_ready_set - Sets the SICR_SEC_IPC_OUTPUT_STATUS bit to 1
+ *
+ * @hw: the txe hardware structure
+ */
+static void mei_txe_output_ready_set(struct mei_txe_hw *hw)
+{
+	mei_txe_br_reg_write(hw,
+			SICR_SEC_IPC_OUTPUT_STATUS_REG,
+			SEC_IPC_OUTPUT_STATUS_RDY);
+}
+
+/**
+ * mei_txe_is_input_ready - check if TXE is ready for receiving data
+ *
+ * @dev: the device structure
+ *
+ * Return: true if INPUT STATUS READY bit is set
+ */
+static bool mei_txe_is_input_ready(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	u32 status;
+
+	status = mei_txe_sec_reg_read(hw, SEC_IPC_INPUT_STATUS_REG);
+	return !!(SEC_IPC_INPUT_STATUS_RDY & status);
+}
+
+/**
+ * mei_txe_intr_clear - clear all interrupts
+ *
+ * @dev: the device structure
+ */
+static inline void mei_txe_intr_clear(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	mei_txe_sec_reg_write_silent(hw, SEC_IPC_HOST_INT_STATUS_REG,
+		SEC_IPC_HOST_INT_STATUS_PENDING);
+	mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_STS_MSK);
+	mei_txe_br_reg_write(hw, HHISR_REG, IPC_HHIER_MSK);
+}
+
+/**
+ * mei_txe_intr_disable - disable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_disable(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	mei_txe_br_reg_write(hw, HHIER_REG, 0);
+	mei_txe_br_reg_write(hw, HIER_REG, 0);
+}
+/**
+ * mei_txe_intr_enable - enable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_enable(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	mei_txe_br_reg_write(hw, HHIER_REG, IPC_HHIER_MSK);
+	mei_txe_br_reg_write(hw, HIER_REG, HIER_INT_EN_MSK);
+}
+
+/**
+ * mei_txe_synchronize_irq - wait for pending IRQ handlers
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_synchronize_irq(struct mei_device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+
+	synchronize_irq(pdev->irq);
+}
+
+/**
+ * mei_txe_pending_interrupts - check if there are pending interrupts
+ *	only Aliveness, Input ready, and output doorbell are of relevance
+ *
+ * @dev: the device structure
+ *
+ * Checks if there are pending interrupts
+ * only Aliveness, Readiness, Input ready, and Output doorbell are relevant
+ *
+ * Return: true if there are pending interrupts
+ */
+static bool mei_txe_pending_interrupts(struct mei_device *dev)
+{
+
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	bool ret = (hw->intr_cause & (TXE_INTR_READINESS |
+				      TXE_INTR_ALIVENESS |
+				      TXE_INTR_IN_READY  |
+				      TXE_INTR_OUT_DB));
+
+	if (ret) {
+		dev_dbg(dev->dev,
+			"Pending Interrupts InReady=%01d Readiness=%01d, Aliveness=%01d, OutDoor=%01d\n",
+			!!(hw->intr_cause & TXE_INTR_IN_READY),
+			!!(hw->intr_cause & TXE_INTR_READINESS),
+			!!(hw->intr_cause & TXE_INTR_ALIVENESS),
+			!!(hw->intr_cause & TXE_INTR_OUT_DB));
+	}
+	return ret;
+}
+
+/**
+ * mei_txe_input_payload_write - write a dword to the host buffer
+ *	at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the host buffer
+ * @value: value
+ */
+static void mei_txe_input_payload_write(struct mei_device *dev,
+			unsigned long idx, u32 value)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_PAYLOAD_REG +
+			(idx * sizeof(u32)), value);
+}
+
+/**
+ * mei_txe_out_data_read - read dword from the device buffer
+ *	at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the device buffer
+ *
+ * Return: register value at index
+ */
+static u32 mei_txe_out_data_read(const struct mei_device *dev,
+					unsigned long idx)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	return mei_txe_br_reg_read(hw,
+		BRIDGE_IPC_OUTPUT_PAYLOAD_REG + (idx * sizeof(u32)));
+}
+
+/* Readiness */
+
+/**
+ * mei_txe_readiness_set_host_rdy - set host readiness bit
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_set_host_rdy(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	mei_txe_br_reg_write(hw,
+		SICR_HOST_IPC_READINESS_REQ_REG,
+		SICR_HOST_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_clear - clear host readiness bit
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_clear(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	mei_txe_br_reg_write(hw, SICR_HOST_IPC_READINESS_REQ_REG,
+				SICR_HOST_IPC_READINESS_RDY_CLR);
+}
+/**
+ * mei_txe_readiness_get - Reads and returns
+ *	the HICR_SEC_IPC_READINESS register value
+ *
+ * @dev: the device structure
+ *
+ * Return: the HICR_SEC_IPC_READINESS register value
+ */
+static u32 mei_txe_readiness_get(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	return mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+}
+
+
+/**
+ * mei_txe_readiness_is_sec_rdy - check readiness
+ *  for HICR_SEC_IPC_READINESS_SEC_RDY
+ *
+ * @readiness: cached readiness state
+ *
+ * Return: true if readiness bit is set
+ */
+static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness)
+{
+	return !!(readiness & HICR_SEC_IPC_READINESS_SEC_RDY);
+}
+
+/**
+ * mei_txe_hw_is_ready - check if the hw is ready
+ *
+ * @dev: the device structure
+ *
+ * Return: true if sec is ready
+ */
+static bool mei_txe_hw_is_ready(struct mei_device *dev)
+{
+	u32 readiness =  mei_txe_readiness_get(dev);
+
+	return mei_txe_readiness_is_sec_rdy(readiness);
+}
+
+/**
+ * mei_txe_host_is_ready - check if the host is ready
+ *
+ * @dev: the device structure
+ *
+ * Return: true if host is ready
+ */
+static inline bool mei_txe_host_is_ready(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	u32 reg = mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+
+	return !!(reg & HICR_SEC_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_wait - wait till readiness settles
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success and -ETIME on timeout
+ */
+static int mei_txe_readiness_wait(struct mei_device *dev)
+{
+	if (mei_txe_hw_is_ready(dev))
+		return 0;
+
+	mutex_unlock(&dev->device_lock);
+	wait_event_timeout(dev->wait_hw_ready, dev->recvd_hw_ready,
+			msecs_to_jiffies(SEC_RESET_WAIT_TIMEOUT));
+	mutex_lock(&dev->device_lock);
+	if (!dev->recvd_hw_ready) {
+		dev_err(dev->dev, "wait for readiness failed\n");
+		return -ETIME;
+	}
+
+	dev->recvd_hw_ready = false;
+	return 0;
+}
+
+static const struct mei_fw_status mei_txe_fw_sts = {
+	.count = 2,
+	.status[0] = PCI_CFG_TXE_FW_STS0,
+	.status[1] = PCI_CFG_TXE_FW_STS1
+};
+
+/**
+ * mei_txe_fw_status - read fw status register from pci config space
+ *
+ * @dev: mei device
+ * @fw_status: fw status register values
+ *
+ * Return: 0 on success, error otherwise
+ */
+static int mei_txe_fw_status(struct mei_device *dev,
+			     struct mei_fw_status *fw_status)
+{
+	const struct mei_fw_status *fw_src = &mei_txe_fw_sts;
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+	int ret;
+	int i;
+
+	if (!fw_status)
+		return -EINVAL;
+
+	fw_status->count = fw_src->count;
+	for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
+		ret = pci_read_config_dword(pdev, fw_src->status[i],
+					    &fw_status->status[i]);
+		trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HSF_X",
+				       fw_src->status[i],
+				       fw_status->status[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * mei_txe_hw_config - configure hardware at the start of the devices
+ *
+ * @dev: the device structure
+ *
+ * Configure hardware at the start of the device should be done only
+ *   once at the device probe time
+ *
+ * Return: always 0
+ */
+static int mei_txe_hw_config(struct mei_device *dev)
+{
+
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	hw->aliveness = mei_txe_aliveness_get(dev);
+	hw->readiness = mei_txe_readiness_get(dev);
+
+	dev_dbg(dev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n",
+		hw->aliveness, hw->readiness);
+
+	return 0;
+}
+
+/**
+ * mei_txe_write - writes a message to device.
+ *
+ * @dev: the device structure
+ * @hdr: header of message
+ * @hdr_len: header length in bytes - must multiplication of a slot (4bytes)
+ * @data: payload
+ * @data_len: paylead length in bytes
+ *
+ * Return: 0 if success, < 0 - otherwise.
+ */
+static int mei_txe_write(struct mei_device *dev,
+			 const void *hdr, size_t hdr_len,
+			 const void *data, size_t data_len)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	unsigned long rem;
+	const u32 *reg_buf;
+	u32 slots = TXE_HBUF_DEPTH;
+	u32 dw_cnt;
+	unsigned long i, j;
+
+	if (WARN_ON(!hdr || !data || hdr_len & 0x3))
+		return -EINVAL;
+
+	dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM((struct mei_msg_hdr *)hdr));
+
+	dw_cnt = mei_data2slots(hdr_len + data_len);
+	if (dw_cnt > slots)
+		return -EMSGSIZE;
+
+	if (WARN(!hw->aliveness, "txe write: aliveness not asserted\n"))
+		return -EAGAIN;
+
+	/* Enable Input Ready Interrupt. */
+	mei_txe_input_ready_interrupt_enable(dev);
+
+	if (!mei_txe_is_input_ready(dev)) {
+		char fw_sts_str[MEI_FW_STATUS_STR_SZ];
+
+		mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ);
+		dev_err(dev->dev, "Input is not ready %s\n", fw_sts_str);
+		return -EAGAIN;
+	}
+
+	reg_buf = hdr;
+	for (i = 0; i < hdr_len / MEI_SLOT_SIZE; i++)
+		mei_txe_input_payload_write(dev, i, reg_buf[i]);
+
+	reg_buf = data;
+	for (j = 0; j < data_len / MEI_SLOT_SIZE; j++)
+		mei_txe_input_payload_write(dev, i + j, reg_buf[j]);
+
+	rem = data_len & 0x3;
+	if (rem > 0) {
+		u32 reg = 0;
+
+		memcpy(&reg, (const u8 *)data + data_len - rem, rem);
+		mei_txe_input_payload_write(dev, i + j, reg);
+	}
+
+	/* after each write the whole buffer is consumed */
+	hw->slots = 0;
+
+	/* Set Input-Doorbell */
+	mei_txe_input_doorbell_set(hw);
+
+	return 0;
+}
+
+/**
+ * mei_txe_hbuf_depth - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * Return: the TXE_HBUF_DEPTH
+ */
+static u32 mei_txe_hbuf_depth(const struct mei_device *dev)
+{
+	return TXE_HBUF_DEPTH;
+}
+
+/**
+ * mei_txe_hbuf_empty_slots - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * Return: always TXE_HBUF_DEPTH
+ */
+static int mei_txe_hbuf_empty_slots(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	return hw->slots;
+}
+
+/**
+ * mei_txe_count_full_read_slots - mimics the me device circular buffer
+ *
+ * @dev: the device structure
+ *
+ * Return: always buffer size in dwords count
+ */
+static int mei_txe_count_full_read_slots(struct mei_device *dev)
+{
+	/* read buffers has static size */
+	return TXE_HBUF_DEPTH;
+}
+
+/**
+ * mei_txe_read_hdr - read message header which is always in 4 first bytes
+ *
+ * @dev: the device structure
+ *
+ * Return: mei message header
+ */
+
+static u32 mei_txe_read_hdr(const struct mei_device *dev)
+{
+	return mei_txe_out_data_read(dev, 0);
+}
+/**
+ * mei_txe_read - reads a message from the txe device.
+ *
+ * @dev: the device structure
+ * @buf: message buffer will be written
+ * @len: message size will be read
+ *
+ * Return: -EINVAL on error wrong argument and 0 on success
+ */
+static int mei_txe_read(struct mei_device *dev,
+		unsigned char *buf, unsigned long len)
+{
+
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	u32 *reg_buf, reg;
+	u32 rem;
+	u32 i;
+
+	if (WARN_ON(!buf || !len))
+		return -EINVAL;
+
+	reg_buf = (u32 *)buf;
+	rem = len & 0x3;
+
+	dev_dbg(dev->dev, "buffer-length = %lu buf[0]0x%08X\n",
+		len, mei_txe_out_data_read(dev, 0));
+
+	for (i = 0; i < len / MEI_SLOT_SIZE; i++) {
+		/* skip header: index starts from 1 */
+		reg = mei_txe_out_data_read(dev, i + 1);
+		dev_dbg(dev->dev, "buf[%d] = 0x%08X\n", i, reg);
+		*reg_buf++ = reg;
+	}
+
+	if (rem) {
+		reg = mei_txe_out_data_read(dev, i + 1);
+		memcpy(reg_buf, &reg, rem);
+	}
+
+	mei_txe_output_ready_set(hw);
+	return 0;
+}
+
+/**
+ * mei_txe_hw_reset - resets host and fw.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * Return: 0 on success and < 0 in case of error
+ */
+static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	u32 aliveness_req;
+	/*
+	 * read input doorbell to ensure consistency between  Bridge and SeC
+	 * return value might be garbage return
+	 */
+	(void)mei_txe_sec_reg_read_silent(hw, SEC_IPC_INPUT_DOORBELL_REG);
+
+	aliveness_req = mei_txe_aliveness_req_get(dev);
+	hw->aliveness = mei_txe_aliveness_get(dev);
+
+	/* Disable interrupts in this stage we will poll */
+	mei_txe_intr_disable(dev);
+
+	/*
+	 * If Aliveness Request and Aliveness Response are not equal then
+	 * wait for them to be equal
+	 * Since we might have interrupts disabled - poll for it
+	 */
+	if (aliveness_req != hw->aliveness)
+		if (mei_txe_aliveness_poll(dev, aliveness_req) < 0) {
+			dev_err(dev->dev, "wait for aliveness settle failed ... bailing out\n");
+			return -EIO;
+		}
+
+	/*
+	 * If Aliveness Request and Aliveness Response are set then clear them
+	 */
+	if (aliveness_req) {
+		mei_txe_aliveness_set(dev, 0);
+		if (mei_txe_aliveness_poll(dev, 0) < 0) {
+			dev_err(dev->dev, "wait for aliveness failed ... bailing out\n");
+			return -EIO;
+		}
+	}
+
+	/*
+	 * Set readiness RDY_CLR bit
+	 */
+	mei_txe_readiness_clear(dev);
+
+	return 0;
+}
+
+/**
+ * mei_txe_hw_start - start the hardware after reset
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_txe_hw_start(struct mei_device *dev)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	int ret;
+
+	u32 hisr;
+
+	/* bring back interrupts */
+	mei_txe_intr_enable(dev);
+
+	ret = mei_txe_readiness_wait(dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "waiting for readiness failed\n");
+		return ret;
+	}
+
+	/*
+	 * If HISR.INT2_STS interrupt status bit is set then clear it.
+	 */
+	hisr = mei_txe_br_reg_read(hw, HISR_REG);
+	if (hisr & HISR_INT_2_STS)
+		mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_2_STS);
+
+	/* Clear the interrupt cause of OutputDoorbell */
+	clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause);
+
+	ret = mei_txe_aliveness_set_sync(dev, 1);
+	if (ret < 0) {
+		dev_err(dev->dev, "wait for aliveness failed ... bailing out\n");
+		return ret;
+	}
+
+	pm_runtime_set_active(dev->dev);
+
+	/* enable input ready interrupts:
+	 * SEC_IPC_HOST_INT_MASK.IPC_INPUT_READY_INT_MASK
+	 */
+	mei_txe_input_ready_interrupt_enable(dev);
+
+
+	/*  Set the SICR_SEC_IPC_OUTPUT_STATUS.IPC_OUTPUT_READY bit */
+	mei_txe_output_ready_set(hw);
+
+	/* Set bit SICR_HOST_IPC_READINESS.HOST_RDY
+	 */
+	mei_txe_readiness_set_host_rdy(dev);
+
+	return 0;
+}
+
+/**
+ * mei_txe_check_and_ack_intrs - translate multi BAR interrupt into
+ *  single bit mask and acknowledge the interrupts
+ *
+ * @dev: the device structure
+ * @do_ack: acknowledge interrupts
+ *
+ * Return: true if found interrupts to process.
+ */
+static bool mei_txe_check_and_ack_intrs(struct mei_device *dev, bool do_ack)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	u32 hisr;
+	u32 hhisr;
+	u32 ipc_isr;
+	u32 aliveness;
+	bool generated;
+
+	/* read interrupt registers */
+	hhisr = mei_txe_br_reg_read(hw, HHISR_REG);
+	generated = (hhisr & IPC_HHIER_MSK);
+	if (!generated)
+		goto out;
+
+	hisr = mei_txe_br_reg_read(hw, HISR_REG);
+
+	aliveness = mei_txe_aliveness_get(dev);
+	if (hhisr & IPC_HHIER_SEC && aliveness) {
+		ipc_isr = mei_txe_sec_reg_read_silent(hw,
+				SEC_IPC_HOST_INT_STATUS_REG);
+	} else {
+		ipc_isr = 0;
+		hhisr &= ~IPC_HHIER_SEC;
+	}
+
+	generated = generated ||
+		(hisr & HISR_INT_STS_MSK) ||
+		(ipc_isr & SEC_IPC_HOST_INT_STATUS_PENDING);
+
+	if (generated && do_ack) {
+		/* Save the interrupt causes */
+		hw->intr_cause |= hisr & HISR_INT_STS_MSK;
+		if (ipc_isr & SEC_IPC_HOST_INT_STATUS_IN_RDY)
+			hw->intr_cause |= TXE_INTR_IN_READY;
+
+
+		mei_txe_intr_disable(dev);
+		/* Clear the interrupts in hierarchy:
+		 * IPC and Bridge, than the High Level */
+		mei_txe_sec_reg_write_silent(hw,
+			SEC_IPC_HOST_INT_STATUS_REG, ipc_isr);
+		mei_txe_br_reg_write(hw, HISR_REG, hisr);
+		mei_txe_br_reg_write(hw, HHISR_REG, hhisr);
+	}
+
+out:
+	return generated;
+}
+
+/**
+ * mei_txe_irq_quick_handler - The ISR of the MEI device
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: IRQ_WAKE_THREAD if interrupt is designed for the device
+ *         IRQ_NONE otherwise
+ */
+irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id)
+{
+	struct mei_device *dev = dev_id;
+
+	if (mei_txe_check_and_ack_intrs(dev, true))
+		return IRQ_WAKE_THREAD;
+	return IRQ_NONE;
+}
+
+
+/**
+ * mei_txe_irq_thread_handler - txe interrupt thread
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: IRQ_HANDLED
+ */
+irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
+{
+	struct mei_device *dev = (struct mei_device *) dev_id;
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+	struct list_head cmpl_list;
+	s32 slots;
+	int rets = 0;
+
+	dev_dbg(dev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n",
+		mei_txe_br_reg_read(hw, HHISR_REG),
+		mei_txe_br_reg_read(hw, HISR_REG),
+		mei_txe_sec_reg_read_silent(hw, SEC_IPC_HOST_INT_STATUS_REG));
+
+
+	/* initialize our complete list */
+	mutex_lock(&dev->device_lock);
+	INIT_LIST_HEAD(&cmpl_list);
+
+	if (pci_dev_msi_enabled(to_pci_dev(dev->dev)))
+		mei_txe_check_and_ack_intrs(dev, true);
+
+	/* show irq events */
+	mei_txe_pending_interrupts(dev);
+
+	hw->aliveness = mei_txe_aliveness_get(dev);
+	hw->readiness = mei_txe_readiness_get(dev);
+
+	/* Readiness:
+	 * Detection of TXE driver going through reset
+	 * or TXE driver resetting the HECI interface.
+	 */
+	if (test_and_clear_bit(TXE_INTR_READINESS_BIT, &hw->intr_cause)) {
+		dev_dbg(dev->dev, "Readiness Interrupt was received...\n");
+
+		/* Check if SeC is going through reset */
+		if (mei_txe_readiness_is_sec_rdy(hw->readiness)) {
+			dev_dbg(dev->dev, "we need to start the dev.\n");
+			dev->recvd_hw_ready = true;
+		} else {
+			dev->recvd_hw_ready = false;
+			if (dev->dev_state != MEI_DEV_RESETTING) {
+
+				dev_warn(dev->dev, "FW not ready: resetting.\n");
+				schedule_work(&dev->reset_work);
+				goto end;
+
+			}
+		}
+		wake_up(&dev->wait_hw_ready);
+	}
+
+	/************************************************************/
+	/* Check interrupt cause:
+	 * Aliveness: Detection of SeC acknowledge of host request that
+	 * it remain alive or host cancellation of that request.
+	 */
+
+	if (test_and_clear_bit(TXE_INTR_ALIVENESS_BIT, &hw->intr_cause)) {
+		/* Clear the interrupt cause */
+		dev_dbg(dev->dev,
+			"Aliveness Interrupt: Status: %d\n", hw->aliveness);
+		dev->pg_event = MEI_PG_EVENT_RECEIVED;
+		if (waitqueue_active(&hw->wait_aliveness_resp))
+			wake_up(&hw->wait_aliveness_resp);
+	}
+
+
+	/* Output Doorbell:
+	 * Detection of SeC having sent output to host
+	 */
+	slots = mei_count_full_read_slots(dev);
+	if (test_and_clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause)) {
+		/* Read from TXE */
+		rets = mei_irq_read_handler(dev, &cmpl_list, &slots);
+		if (rets &&
+		    (dev->dev_state != MEI_DEV_RESETTING &&
+		     dev->dev_state != MEI_DEV_POWER_DOWN)) {
+			dev_err(dev->dev,
+				"mei_irq_read_handler ret = %d.\n", rets);
+
+			schedule_work(&dev->reset_work);
+			goto end;
+		}
+	}
+	/* Input Ready: Detection if host can write to SeC */
+	if (test_and_clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause)) {
+		dev->hbuf_is_ready = true;
+		hw->slots = TXE_HBUF_DEPTH;
+	}
+
+	if (hw->aliveness && dev->hbuf_is_ready) {
+		/* get the real register value */
+		dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+		rets = mei_irq_write_handler(dev, &cmpl_list);
+		if (rets && rets != -EMSGSIZE)
+			dev_err(dev->dev, "mei_irq_write_handler ret = %d.\n",
+				rets);
+		dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+	}
+
+	mei_irq_compl_handler(dev, &cmpl_list);
+
+end:
+	dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
+
+	mutex_unlock(&dev->device_lock);
+
+	mei_enable_interrupts(dev);
+	return IRQ_HANDLED;
+}
+
+static const struct mei_hw_ops mei_txe_hw_ops = {
+
+	.host_is_ready = mei_txe_host_is_ready,
+
+	.fw_status = mei_txe_fw_status,
+	.pg_state = mei_txe_pg_state,
+
+	.hw_is_ready = mei_txe_hw_is_ready,
+	.hw_reset = mei_txe_hw_reset,
+	.hw_config = mei_txe_hw_config,
+	.hw_start = mei_txe_hw_start,
+
+	.pg_in_transition = mei_txe_pg_in_transition,
+	.pg_is_enabled = mei_txe_pg_is_enabled,
+
+	.intr_clear = mei_txe_intr_clear,
+	.intr_enable = mei_txe_intr_enable,
+	.intr_disable = mei_txe_intr_disable,
+	.synchronize_irq = mei_txe_synchronize_irq,
+
+	.hbuf_free_slots = mei_txe_hbuf_empty_slots,
+	.hbuf_is_ready = mei_txe_is_input_ready,
+	.hbuf_depth = mei_txe_hbuf_depth,
+
+	.write = mei_txe_write,
+
+	.rdbuf_full_slots = mei_txe_count_full_read_slots,
+	.read_hdr = mei_txe_read_hdr,
+
+	.read = mei_txe_read,
+
+};
+
+/**
+ * mei_txe_dev_init - allocates and initializes txe hardware specific structure
+ *
+ * @pdev: pci device
+ *
+ * Return: struct mei_device * on success or NULL
+ */
+struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
+{
+	struct mei_device *dev;
+	struct mei_txe_hw *hw;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev) + sizeof(*hw), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	mei_device_init(dev, &pdev->dev, &mei_txe_hw_ops);
+
+	hw = to_txe_hw(dev);
+
+	init_waitqueue_head(&hw->wait_aliveness_resp);
+
+	return dev;
+}
+
+/**
+ * mei_txe_setup_satt2 - SATT2 configuration for DMA support.
+ *
+ * @dev:   the device structure
+ * @addr:  physical address start of the range
+ * @range: physical range size
+ *
+ * Return: 0 on success an error code otherwise
+ */
+int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range)
+{
+	struct mei_txe_hw *hw = to_txe_hw(dev);
+
+	u32 lo32 = lower_32_bits(addr);
+	u32 hi32 = upper_32_bits(addr);
+	u32 ctrl;
+
+	/* SATT is limited to 36 Bits */
+	if (hi32 & ~0xF)
+		return -EINVAL;
+
+	/* SATT has to be 16Byte aligned */
+	if (lo32 & 0xF)
+		return -EINVAL;
+
+	/* SATT range has to be 4Bytes aligned */
+	if (range & 0x4)
+		return -EINVAL;
+
+	/* SATT is limited to 32 MB range*/
+	if (range > SATT_RANGE_MAX)
+		return -EINVAL;
+
+	ctrl = SATT2_CTRL_VALID_MSK;
+	ctrl |= hi32  << SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT;
+
+	mei_txe_br_reg_write(hw, SATT2_SAP_SIZE_REG, range);
+	mei_txe_br_reg_write(hw, SATT2_BRG_BA_LSB_REG, lo32);
+	mei_txe_br_reg_write(hw, SATT2_CTRL_REG, ctrl);
+	dev_dbg(dev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n",
+		range, lo32, ctrl);
+
+	return 0;
+}