Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 991 insertions, 0 deletions

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.h b/drivers/net/ethernet/amazon/ena/ena_com.h
new file mode 100644
index 000000000..55097750d
--- /dev/null
+++ b/drivers/net/ethernet/amazon/ena/ena_com.h
@@ -0,0 +1,991 @@
+/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
+/*
+ * Copyright 2015-2020 Amazon.com, Inc. or its affiliates. All rights reserved.
+ */
+
+#ifndef ENA_COM
+#define ENA_COM
+
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/prefetch.h>
+#include <linux/sched.h>
+#include <linux/sizes.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/netdevice.h>
+
+#include "ena_common_defs.h"
+#include "ena_admin_defs.h"
+#include "ena_eth_io_defs.h"
+#include "ena_regs_defs.h"
+
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define ENA_MAX_NUM_IO_QUEUES 128U
+/* We need to queues for each IO (on for Tx and one for Rx) */
+#define ENA_TOTAL_NUM_QUEUES (2 * (ENA_MAX_NUM_IO_QUEUES))
+
+#define ENA_MAX_HANDLERS 256
+
+#define ENA_MAX_PHYS_ADDR_SIZE_BITS 48
+
+/* Unit in usec */
+#define ENA_REG_READ_TIMEOUT 200000
+
+#define ADMIN_SQ_SIZE(depth)	((depth) * sizeof(struct ena_admin_aq_entry))
+#define ADMIN_CQ_SIZE(depth)	((depth) * sizeof(struct ena_admin_acq_entry))
+#define ADMIN_AENQ_SIZE(depth)	((depth) * sizeof(struct ena_admin_aenq_entry))
+
+/*****************************************************************************/
+/*****************************************************************************/
+/* ENA adaptive interrupt moderation settings */
+
+#define ENA_INTR_INITIAL_TX_INTERVAL_USECS 64
+#define ENA_INTR_INITIAL_RX_INTERVAL_USECS 0
+#define ENA_DEFAULT_INTR_DELAY_RESOLUTION 1
+
+#define ENA_HASH_KEY_SIZE 40
+
+#define ENA_HW_HINTS_NO_TIMEOUT	0xFFFF
+
+#define ENA_FEATURE_MAX_QUEUE_EXT_VER 1
+
+struct ena_llq_configurations {
+	enum ena_admin_llq_header_location llq_header_location;
+	enum ena_admin_llq_ring_entry_size llq_ring_entry_size;
+	enum ena_admin_llq_stride_ctrl  llq_stride_ctrl;
+	enum ena_admin_llq_num_descs_before_header llq_num_decs_before_header;
+	u16 llq_ring_entry_size_value;
+};
+
+enum queue_direction {
+	ENA_COM_IO_QUEUE_DIRECTION_TX,
+	ENA_COM_IO_QUEUE_DIRECTION_RX
+};
+
+struct ena_com_buf {
+	dma_addr_t paddr; /**< Buffer physical address */
+	u16 len; /**< Buffer length in bytes */
+};
+
+struct ena_com_rx_buf_info {
+	u16 len;
+	u16 req_id;
+};
+
+struct ena_com_io_desc_addr {
+	u8 __iomem *pbuf_dev_addr; /* LLQ address */
+	u8 *virt_addr;
+	dma_addr_t phys_addr;
+};
+
+struct ena_com_tx_meta {
+	u16 mss;
+	u16 l3_hdr_len;
+	u16 l3_hdr_offset;
+	u16 l4_hdr_len; /* In words */
+};
+
+struct ena_com_llq_info {
+	u16 header_location_ctrl;
+	u16 desc_stride_ctrl;
+	u16 desc_list_entry_size_ctrl;
+	u16 desc_list_entry_size;
+	u16 descs_num_before_header;
+	u16 descs_per_entry;
+	u16 max_entries_in_tx_burst;
+	bool disable_meta_caching;
+};
+
+struct ena_com_io_cq {
+	struct ena_com_io_desc_addr cdesc_addr;
+
+	/* Interrupt unmask register */
+	u32 __iomem *unmask_reg;
+
+	/* The completion queue head doorbell register */
+	u32 __iomem *cq_head_db_reg;
+
+	/* numa configuration register (for TPH) */
+	u32 __iomem *numa_node_cfg_reg;
+
+	/* The value to write to the above register to unmask
+	 * the interrupt of this queue
+	 */
+	u32 msix_vector;
+
+	enum queue_direction direction;
+
+	/* holds the number of cdesc of the current packet */
+	u16 cur_rx_pkt_cdesc_count;
+	/* save the firt cdesc idx of the current packet */
+	u16 cur_rx_pkt_cdesc_start_idx;
+
+	u16 q_depth;
+	/* Caller qid */
+	u16 qid;
+
+	/* Device queue index */
+	u16 idx;
+	u16 head;
+	u16 last_head_update;
+	u8 phase;
+	u8 cdesc_entry_size_in_bytes;
+
+} ____cacheline_aligned;
+
+struct ena_com_io_bounce_buffer_control {
+	u8 *base_buffer;
+	u16 next_to_use;
+	u16 buffer_size;
+	u16 buffers_num;  /* Must be a power of 2 */
+};
+
+/* This struct is to keep tracking the current location of the next llq entry */
+struct ena_com_llq_pkt_ctrl {
+	u8 *curr_bounce_buf;
+	u16 idx;
+	u16 descs_left_in_line;
+};
+
+struct ena_com_io_sq {
+	struct ena_com_io_desc_addr desc_addr;
+
+	u32 __iomem *db_addr;
+	u8 __iomem *header_addr;
+
+	enum queue_direction direction;
+	enum ena_admin_placement_policy_type mem_queue_type;
+
+	bool disable_meta_caching;
+
+	u32 msix_vector;
+	struct ena_com_tx_meta cached_tx_meta;
+	struct ena_com_llq_info llq_info;
+	struct ena_com_llq_pkt_ctrl llq_buf_ctrl;
+	struct ena_com_io_bounce_buffer_control bounce_buf_ctrl;
+
+	u16 q_depth;
+	u16 qid;
+
+	u16 idx;
+	u16 tail;
+	u16 next_to_comp;
+	u16 llq_last_copy_tail;
+	u32 tx_max_header_size;
+	u8 phase;
+	u8 desc_entry_size;
+	u8 dma_addr_bits;
+	u16 entries_in_tx_burst_left;
+} ____cacheline_aligned;
+
+struct ena_com_admin_cq {
+	struct ena_admin_acq_entry *entries;
+	dma_addr_t dma_addr;
+
+	u16 head;
+	u8 phase;
+};
+
+struct ena_com_admin_sq {
+	struct ena_admin_aq_entry *entries;
+	dma_addr_t dma_addr;
+
+	u32 __iomem *db_addr;
+
+	u16 head;
+	u16 tail;
+	u8 phase;
+
+};
+
+struct ena_com_stats_admin {
+	u64 aborted_cmd;
+	u64 submitted_cmd;
+	u64 completed_cmd;
+	u64 out_of_space;
+	u64 no_completion;
+};
+
+struct ena_com_admin_queue {
+	void *q_dmadev;
+	struct ena_com_dev *ena_dev;
+	spinlock_t q_lock; /* spinlock for the admin queue */
+
+	struct ena_comp_ctx *comp_ctx;
+	u32 completion_timeout;
+	u16 q_depth;
+	struct ena_com_admin_cq cq;
+	struct ena_com_admin_sq sq;
+
+	/* Indicate if the admin queue should poll for completion */
+	bool polling;
+
+	/* Define if fallback to polling mode should occur */
+	bool auto_polling;
+
+	u16 curr_cmd_id;
+
+	/* Indicate that the ena was initialized and can
+	 * process new admin commands
+	 */
+	bool running_state;
+
+	/* Count the number of outstanding admin commands */
+	atomic_t outstanding_cmds;
+
+	struct ena_com_stats_admin stats;
+};
+
+struct ena_aenq_handlers;
+
+struct ena_com_aenq {
+	u16 head;
+	u8 phase;
+	struct ena_admin_aenq_entry *entries;
+	dma_addr_t dma_addr;
+	u16 q_depth;
+	struct ena_aenq_handlers *aenq_handlers;
+};
+
+struct ena_com_mmio_read {
+	struct ena_admin_ena_mmio_req_read_less_resp *read_resp;
+	dma_addr_t read_resp_dma_addr;
+	u32 reg_read_to; /* in us */
+	u16 seq_num;
+	bool readless_supported;
+	/* spin lock to ensure a single outstanding read */
+	spinlock_t lock;
+};
+
+struct ena_rss {
+	/* Indirect table */
+	u16 *host_rss_ind_tbl;
+	struct ena_admin_rss_ind_table_entry *rss_ind_tbl;
+	dma_addr_t rss_ind_tbl_dma_addr;
+	u16 tbl_log_size;
+
+	/* Hash key */
+	enum ena_admin_hash_functions hash_func;
+	struct ena_admin_feature_rss_flow_hash_control *hash_key;
+	dma_addr_t hash_key_dma_addr;
+	u32 hash_init_val;
+
+	/* Flow Control */
+	struct ena_admin_feature_rss_hash_control *hash_ctrl;
+	dma_addr_t hash_ctrl_dma_addr;
+
+};
+
+struct ena_host_attribute {
+	/* Debug area */
+	u8 *debug_area_virt_addr;
+	dma_addr_t debug_area_dma_addr;
+	u32 debug_area_size;
+
+	/* Host information */
+	struct ena_admin_host_info *host_info;
+	dma_addr_t host_info_dma_addr;
+};
+
+/* Each ena_dev is a PCI function. */
+struct ena_com_dev {
+	struct ena_com_admin_queue admin_queue;
+	struct ena_com_aenq aenq;
+	struct ena_com_io_cq io_cq_queues[ENA_TOTAL_NUM_QUEUES];
+	struct ena_com_io_sq io_sq_queues[ENA_TOTAL_NUM_QUEUES];
+	u8 __iomem *reg_bar;
+	void __iomem *mem_bar;
+	void *dmadev;
+
+	enum ena_admin_placement_policy_type tx_mem_queue_type;
+	u32 tx_max_header_size;
+	u16 stats_func; /* Selected function for extended statistic dump */
+	u16 stats_queue; /* Selected queue for extended statistic dump */
+
+	struct ena_com_mmio_read mmio_read;
+
+	struct ena_rss rss;
+	u32 supported_features;
+	u32 dma_addr_bits;
+
+	struct ena_host_attribute host_attr;
+	bool adaptive_coalescing;
+	u16 intr_delay_resolution;
+
+	/* interrupt moderation intervals are in usec divided by
+	 * intr_delay_resolution, which is supplied by the device.
+	 */
+	u32 intr_moder_tx_interval;
+	u32 intr_moder_rx_interval;
+
+	struct ena_intr_moder_entry *intr_moder_tbl;
+
+	struct ena_com_llq_info llq_info;
+
+	u32 ena_min_poll_delay_us;
+};
+
+struct ena_com_dev_get_features_ctx {
+	struct ena_admin_queue_feature_desc max_queues;
+	struct ena_admin_queue_ext_feature_desc max_queue_ext;
+	struct ena_admin_device_attr_feature_desc dev_attr;
+	struct ena_admin_feature_aenq_desc aenq;
+	struct ena_admin_feature_offload_desc offload;
+	struct ena_admin_ena_hw_hints hw_hints;
+	struct ena_admin_feature_llq_desc llq;
+};
+
+struct ena_com_create_io_ctx {
+	enum ena_admin_placement_policy_type mem_queue_type;
+	enum queue_direction direction;
+	int numa_node;
+	u32 msix_vector;
+	u16 queue_size;
+	u16 qid;
+};
+
+typedef void (*ena_aenq_handler)(void *data,
+	struct ena_admin_aenq_entry *aenq_e);
+
+/* Holds aenq handlers. Indexed by AENQ event group */
+struct ena_aenq_handlers {
+	ena_aenq_handler handlers[ENA_MAX_HANDLERS];
+	ena_aenq_handler unimplemented_handler;
+};
+
+/*****************************************************************************/
+/*****************************************************************************/
+
+/* ena_com_mmio_reg_read_request_init - Init the mmio reg read mechanism
+ * @ena_dev: ENA communication layer struct
+ *
+ * Initialize the register read mechanism.
+ *
+ * @note: This method must be the first stage in the initialization sequence.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism
+ * @ena_dev: ENA communication layer struct
+ * @readless_supported: readless mode (enable/disable)
+ */
+void ena_com_set_mmio_read_mode(struct ena_com_dev *ena_dev,
+				bool readless_supported);
+
+/* ena_com_mmio_reg_read_request_write_dev_addr - Write the mmio reg read return
+ * value physical address.
+ * @ena_dev: ENA communication layer struct
+ */
+void ena_com_mmio_reg_read_request_write_dev_addr(struct ena_com_dev *ena_dev);
+
+/* ena_com_mmio_reg_read_request_destroy - Destroy the mmio reg read mechanism
+ * @ena_dev: ENA communication layer struct
+ */
+void ena_com_mmio_reg_read_request_destroy(struct ena_com_dev *ena_dev);
+
+/* ena_com_admin_init - Init the admin and the async queues
+ * @ena_dev: ENA communication layer struct
+ * @aenq_handlers: Those handlers to be called upon event.
+ *
+ * Initialize the admin submission and completion queues.
+ * Initialize the asynchronous events notification queues.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_admin_init(struct ena_com_dev *ena_dev,
+		       struct ena_aenq_handlers *aenq_handlers);
+
+/* ena_com_admin_destroy - Destroy the admin and the async events queues.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @note: Before calling this method, the caller must validate that the device
+ * won't send any additional admin completions/aenq.
+ * To achieve that, a FLR is recommended.
+ */
+void ena_com_admin_destroy(struct ena_com_dev *ena_dev);
+
+/* ena_com_dev_reset - Perform device FLR to the device.
+ * @ena_dev: ENA communication layer struct
+ * @reset_reason: Specify what is the trigger for the reset in case of an error.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_dev_reset(struct ena_com_dev *ena_dev,
+		      enum ena_regs_reset_reason_types reset_reason);
+
+/* ena_com_create_io_queue - Create io queue.
+ * @ena_dev: ENA communication layer struct
+ * @ctx - create context structure
+ *
+ * Create the submission and the completion queues.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_create_io_queue(struct ena_com_dev *ena_dev,
+			    struct ena_com_create_io_ctx *ctx);
+
+/* ena_com_destroy_io_queue - Destroy IO queue with the queue id - qid.
+ * @ena_dev: ENA communication layer struct
+ * @qid - the caller virtual queue id.
+ */
+void ena_com_destroy_io_queue(struct ena_com_dev *ena_dev, u16 qid);
+
+/* ena_com_get_io_handlers - Return the io queue handlers
+ * @ena_dev: ENA communication layer struct
+ * @qid - the caller virtual queue id.
+ * @io_sq - IO submission queue handler
+ * @io_cq - IO completion queue handler.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_get_io_handlers(struct ena_com_dev *ena_dev, u16 qid,
+			    struct ena_com_io_sq **io_sq,
+			    struct ena_com_io_cq **io_cq);
+
+/* ena_com_admin_aenq_enable - ENAble asynchronous event notifications
+ * @ena_dev: ENA communication layer struct
+ *
+ * After this method, aenq event can be received via AENQ.
+ */
+void ena_com_admin_aenq_enable(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_admin_running_state - Set the state of the admin queue
+ * @ena_dev: ENA communication layer struct
+ *
+ * Change the state of the admin queue (enable/disable)
+ */
+void ena_com_set_admin_running_state(struct ena_com_dev *ena_dev, bool state);
+
+/* ena_com_get_admin_running_state - Get the admin queue state
+ * @ena_dev: ENA communication layer struct
+ *
+ * Retrieve the state of the admin queue (enable/disable)
+ *
+ * @return - current polling mode (enable/disable)
+ */
+bool ena_com_get_admin_running_state(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_admin_polling_mode - Set the admin completion queue polling mode
+ * @ena_dev: ENA communication layer struct
+ * @polling: ENAble/Disable polling mode
+ *
+ * Set the admin completion mode.
+ */
+void ena_com_set_admin_polling_mode(struct ena_com_dev *ena_dev, bool polling);
+
+/* ena_com_set_admin_auto_polling_mode - Enable autoswitch to polling mode
+ * @ena_dev: ENA communication layer struct
+ * @polling: Enable/Disable polling mode
+ *
+ * Set the autopolling mode.
+ * If autopolling is on:
+ * In case of missing interrupt when data is available switch to polling.
+ */
+void ena_com_set_admin_auto_polling_mode(struct ena_com_dev *ena_dev,
+					 bool polling);
+
+/* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method goes over the admin completion queue and wakes up all the pending
+ * threads that wait on the commands wait event.
+ *
+ * @note: Should be called after MSI-X interrupt.
+ */
+void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev);
+
+/* ena_com_aenq_intr_handler - AENQ interrupt handler
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method goes over the async event notification queue and calls the proper
+ * aenq handler.
+ */
+void ena_com_aenq_intr_handler(struct ena_com_dev *ena_dev, void *data);
+
+/* ena_com_abort_admin_commands - Abort all the outstanding admin commands.
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method aborts all the outstanding admin commands.
+ * The caller should then call ena_com_wait_for_abort_completion to make sure
+ * all the commands were completed.
+ */
+void ena_com_abort_admin_commands(struct ena_com_dev *ena_dev);
+
+/* ena_com_wait_for_abort_completion - Wait for admin commands abort.
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method waits until all the outstanding admin commands are completed.
+ */
+void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev);
+
+/* ena_com_validate_version - Validate the device parameters
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method verifies the device parameters are the same as the saved
+ * parameters in ena_dev.
+ * This method is useful after device reset, to validate the device mac address
+ * and the device offloads are the same as before the reset.
+ *
+ * @return - 0 on success negative value otherwise.
+ */
+int ena_com_validate_version(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_link_params - Retrieve physical link parameters.
+ * @ena_dev: ENA communication layer struct
+ * @resp: Link parameters
+ *
+ * Retrieve the physical link parameters,
+ * like speed, auto-negotiation and full duplex support.
+ *
+ * @return - 0 on Success negative value otherwise.
+ */
+int ena_com_get_link_params(struct ena_com_dev *ena_dev,
+			    struct ena_admin_get_feat_resp *resp);
+
+/* ena_com_get_dma_width - Retrieve physical dma address width the device
+ * supports.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Retrieve the maximum physical address bits the device can handle.
+ *
+ * @return: > 0 on Success and negative value otherwise.
+ */
+int ena_com_get_dma_width(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_aenq_config - Set aenq groups configurations
+ * @ena_dev: ENA communication layer struct
+ * @groups flag: bit fields flags of enum ena_admin_aenq_group.
+ *
+ * Configure which aenq event group the driver would like to receive.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_aenq_config(struct ena_com_dev *ena_dev, u32 groups_flag);
+
+/* ena_com_get_dev_attr_feat - Get device features
+ * @ena_dev: ENA communication layer struct
+ * @get_feat_ctx: returned context that contain the get features.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_dev_attr_feat(struct ena_com_dev *ena_dev,
+			      struct ena_com_dev_get_features_ctx *get_feat_ctx);
+
+/* ena_com_get_dev_basic_stats - Get device basic statistics
+ * @ena_dev: ENA communication layer struct
+ * @stats: stats return value
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_dev_basic_stats(struct ena_com_dev *ena_dev,
+				struct ena_admin_basic_stats *stats);
+
+/* ena_com_get_eni_stats - Get extended network interface statistics
+ * @ena_dev: ENA communication layer struct
+ * @stats: stats return value
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_eni_stats(struct ena_com_dev *ena_dev,
+			  struct ena_admin_eni_stats *stats);
+
+/* ena_com_set_dev_mtu - Configure the device mtu.
+ * @ena_dev: ENA communication layer struct
+ * @mtu: mtu value
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_dev_mtu(struct ena_com_dev *ena_dev, int mtu);
+
+/* ena_com_get_offload_settings - Retrieve the device offloads capabilities
+ * @ena_dev: ENA communication layer struct
+ * @offlad: offload return value
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_offload_settings(struct ena_com_dev *ena_dev,
+				 struct ena_admin_feature_offload_desc *offload);
+
+/* ena_com_rss_init - Init RSS
+ * @ena_dev: ENA communication layer struct
+ * @log_size: indirection log size
+ *
+ * Allocate RSS/RFS resources.
+ * The caller then can configure rss using ena_com_set_hash_function,
+ * ena_com_set_hash_ctrl and ena_com_indirect_table_set.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_rss_init(struct ena_com_dev *ena_dev, u16 log_size);
+
+/* ena_com_rss_destroy - Destroy rss
+ * @ena_dev: ENA communication layer struct
+ *
+ * Free all the RSS/RFS resources.
+ */
+void ena_com_rss_destroy(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_current_hash_function - Get RSS hash function
+ * @ena_dev: ENA communication layer struct
+ *
+ * Return the current hash function.
+ * @return: 0 or one of the ena_admin_hash_functions values.
+ */
+int ena_com_get_current_hash_function(struct ena_com_dev *ena_dev);
+
+/* ena_com_fill_hash_function - Fill RSS hash function
+ * @ena_dev: ENA communication layer struct
+ * @func: The hash function (Toeplitz or crc)
+ * @key: Hash key (for toeplitz hash)
+ * @key_len: key length (max length 10 DW)
+ * @init_val: initial value for the hash function
+ *
+ * Fill the ena_dev resources with the desire hash function, hash key, key_len
+ * and key initial value (if needed by the hash function).
+ * To flush the key into the device the caller should call
+ * ena_com_set_hash_function.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
+			       enum ena_admin_hash_functions func,
+			       const u8 *key, u16 key_len, u32 init_val);
+
+/* ena_com_set_hash_function - Flush the hash function and it dependencies to
+ * the device.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Flush the hash function and it dependencies (key, key length and
+ * initial value) if needed.
+ *
+ * @note: Prior to this method the caller should call ena_com_fill_hash_function
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_hash_function(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_hash_function - Retrieve the hash function from the device.
+ * @ena_dev: ENA communication layer struct
+ * @func: hash function
+ *
+ * Retrieve the hash function from the device.
+ *
+ * @note: If the caller called ena_com_fill_hash_function but didn't flush
+ * it to the device, the new configuration will be lost.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
+			      enum ena_admin_hash_functions *func);
+
+/* ena_com_get_hash_key - Retrieve the hash key
+ * @ena_dev: ENA communication layer struct
+ * @key: hash key
+ *
+ * Retrieve the hash key.
+ *
+ * @note: If the caller called ena_com_fill_hash_key but didn't flush
+ * it to the device, the new configuration will be lost.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_hash_key(struct ena_com_dev *ena_dev, u8 *key);
+/* ena_com_fill_hash_ctrl - Fill RSS hash control
+ * @ena_dev: ENA communication layer struct.
+ * @proto: The protocol to configure.
+ * @hash_fields: bit mask of ena_admin_flow_hash_fields
+ *
+ * Fill the ena_dev resources with the desire hash control (the ethernet
+ * fields that take part of the hash) for a specific protocol.
+ * To flush the hash control to the device, the caller should call
+ * ena_com_set_hash_ctrl.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_fill_hash_ctrl(struct ena_com_dev *ena_dev,
+			   enum ena_admin_flow_hash_proto proto,
+			   u16 hash_fields);
+
+/* ena_com_set_hash_ctrl - Flush the hash control resources to the device.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Flush the hash control (the ethernet fields that take part of the hash)
+ *
+ * @note: Prior to this method the caller should call ena_com_fill_hash_ctrl.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_hash_ctrl(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_hash_ctrl - Retrieve the hash control from the device.
+ * @ena_dev: ENA communication layer struct
+ * @proto: The protocol to retrieve.
+ * @fields: bit mask of ena_admin_flow_hash_fields.
+ *
+ * Retrieve the hash control from the device.
+ *
+ * @note: If the caller called ena_com_fill_hash_ctrl but didn't flush
+ * it to the device, the new configuration will be lost.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_hash_ctrl(struct ena_com_dev *ena_dev,
+			  enum ena_admin_flow_hash_proto proto,
+			  u16 *fields);
+
+/* ena_com_set_default_hash_ctrl - Set the hash control to a default
+ * configuration.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Fill the ena_dev resources with the default hash control configuration.
+ * To flush the hash control to the device, the caller should call
+ * ena_com_set_hash_ctrl.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_default_hash_ctrl(struct ena_com_dev *ena_dev);
+
+/* ena_com_indirect_table_fill_entry - Fill a single entry in the RSS
+ * indirection table
+ * @ena_dev: ENA communication layer struct.
+ * @entry_idx - indirection table entry.
+ * @entry_value - redirection value
+ *
+ * Fill a single entry of the RSS indirection table in the ena_dev resources.
+ * To flush the indirection table to the device, the called should call
+ * ena_com_indirect_table_set.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_indirect_table_fill_entry(struct ena_com_dev *ena_dev,
+				      u16 entry_idx, u16 entry_value);
+
+/* ena_com_indirect_table_set - Flush the indirection table to the device.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Flush the indirection hash control to the device.
+ * Prior to this method the caller should call ena_com_indirect_table_fill_entry
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_indirect_table_set(struct ena_com_dev *ena_dev);
+
+/* ena_com_indirect_table_get - Retrieve the indirection table from the device.
+ * @ena_dev: ENA communication layer struct
+ * @ind_tbl: indirection table
+ *
+ * Retrieve the RSS indirection table from the device.
+ *
+ * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flush
+ * it to the device, the new configuration will be lost.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_indirect_table_get(struct ena_com_dev *ena_dev, u32 *ind_tbl);
+
+/* ena_com_allocate_host_info - Allocate host info resources.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_allocate_host_info(struct ena_com_dev *ena_dev);
+
+/* ena_com_allocate_debug_area - Allocate debug area.
+ * @ena_dev: ENA communication layer struct
+ * @debug_area_size - debug area size.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev,
+				u32 debug_area_size);
+
+/* ena_com_delete_debug_area - Free the debug area resources.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Free the allocated debug area.
+ */
+void ena_com_delete_debug_area(struct ena_com_dev *ena_dev);
+
+/* ena_com_delete_host_info - Free the host info resources.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Free the allocated host info.
+ */
+void ena_com_delete_host_info(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_host_attributes - Update the device with the host
+ * attributes (debug area and host info) base address.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_host_attributes(struct ena_com_dev *ena_dev);
+
+/* ena_com_create_io_cq - Create io completion queue.
+ * @ena_dev: ENA communication layer struct
+ * @io_cq - io completion queue handler
+
+ * Create IO completion queue.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_create_io_cq(struct ena_com_dev *ena_dev,
+			 struct ena_com_io_cq *io_cq);
+
+/* ena_com_destroy_io_cq - Destroy io completion queue.
+ * @ena_dev: ENA communication layer struct
+ * @io_cq - io completion queue handler
+
+ * Destroy IO completion queue.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_destroy_io_cq(struct ena_com_dev *ena_dev,
+			  struct ena_com_io_cq *io_cq);
+
+/* ena_com_execute_admin_command - Execute admin command
+ * @admin_queue: admin queue.
+ * @cmd: the admin command to execute.
+ * @cmd_size: the command size.
+ * @cmd_completion: command completion return value.
+ * @cmd_comp_size: command completion size.
+
+ * Submit an admin command and then wait until the device returns a
+ * completion.
+ * The completion will be copied into cmd_comp.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_execute_admin_command(struct ena_com_admin_queue *admin_queue,
+				  struct ena_admin_aq_entry *cmd,
+				  size_t cmd_size,
+				  struct ena_admin_acq_entry *cmd_comp,
+				  size_t cmd_comp_size);
+
+/* ena_com_init_interrupt_moderation - Init interrupt moderation
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_init_interrupt_moderation(struct ena_com_dev *ena_dev);
+
+/* ena_com_interrupt_moderation_supported - Return if interrupt moderation
+ * capability is supported by the device.
+ *
+ * @return - supported or not.
+ */
+bool ena_com_interrupt_moderation_supported(struct ena_com_dev *ena_dev);
+
+/* ena_com_update_nonadaptive_moderation_interval_tx - Update the
+ * non-adaptive interval in Tx direction.
+ * @ena_dev: ENA communication layer struct
+ * @tx_coalesce_usecs: Interval in usec.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_update_nonadaptive_moderation_interval_tx(struct ena_com_dev *ena_dev,
+						      u32 tx_coalesce_usecs);
+
+/* ena_com_update_nonadaptive_moderation_interval_rx - Update the
+ * non-adaptive interval in Rx direction.
+ * @ena_dev: ENA communication layer struct
+ * @rx_coalesce_usecs: Interval in usec.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_update_nonadaptive_moderation_interval_rx(struct ena_com_dev *ena_dev,
+						      u32 rx_coalesce_usecs);
+
+/* ena_com_get_nonadaptive_moderation_interval_tx - Retrieve the
+ * non-adaptive interval in Tx direction.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return - interval in usec
+ */
+unsigned int ena_com_get_nonadaptive_moderation_interval_tx(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_nonadaptive_moderation_interval_rx - Retrieve the
+ * non-adaptive interval in Rx direction.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return - interval in usec
+ */
+unsigned int ena_com_get_nonadaptive_moderation_interval_rx(struct ena_com_dev *ena_dev);
+
+/* ena_com_config_dev_mode - Configure the placement policy of the device.
+ * @ena_dev: ENA communication layer struct
+ * @llq_features: LLQ feature descriptor, retrieve via
+ *		   ena_com_get_dev_attr_feat.
+ * @ena_llq_config: The default driver LLQ parameters configurations
+ */
+int ena_com_config_dev_mode(struct ena_com_dev *ena_dev,
+			    struct ena_admin_feature_llq_desc *llq_features,
+			    struct ena_llq_configurations *llq_default_config);
+
+static inline bool ena_com_get_adaptive_moderation_enabled(struct ena_com_dev *ena_dev)
+{
+	return ena_dev->adaptive_coalescing;
+}
+
+static inline void ena_com_enable_adaptive_moderation(struct ena_com_dev *ena_dev)
+{
+	ena_dev->adaptive_coalescing = true;
+}
+
+static inline void ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_dev)
+{
+	ena_dev->adaptive_coalescing = false;
+}
+
+/* ena_com_update_intr_reg - Prepare interrupt register
+ * @intr_reg: interrupt register to update.
+ * @rx_delay_interval: Rx interval in usecs
+ * @tx_delay_interval: Tx interval in usecs
+ * @unmask: unmask enable/disable
+ *
+ * Prepare interrupt update register with the supplied parameters.
+ */
+static inline void ena_com_update_intr_reg(struct ena_eth_io_intr_reg *intr_reg,
+					   u32 rx_delay_interval,
+					   u32 tx_delay_interval,
+					   bool unmask)
+{
+	intr_reg->intr_control = 0;
+	intr_reg->intr_control |= rx_delay_interval &
+		ENA_ETH_IO_INTR_REG_RX_INTR_DELAY_MASK;
+
+	intr_reg->intr_control |=
+		(tx_delay_interval << ENA_ETH_IO_INTR_REG_TX_INTR_DELAY_SHIFT)
+		& ENA_ETH_IO_INTR_REG_TX_INTR_DELAY_MASK;
+
+	if (unmask)
+		intr_reg->intr_control |= ENA_ETH_IO_INTR_REG_INTR_UNMASK_MASK;
+}
+
+static inline u8 *ena_com_get_next_bounce_buffer(struct ena_com_io_bounce_buffer_control *bounce_buf_ctrl)
+{
+	u16 size, buffers_num;
+	u8 *buf;
+
+	size = bounce_buf_ctrl->buffer_size;
+	buffers_num = bounce_buf_ctrl->buffers_num;
+
+	buf = bounce_buf_ctrl->base_buffer +
+		(bounce_buf_ctrl->next_to_use++ & (buffers_num - 1)) * size;
+
+	prefetchw(bounce_buf_ctrl->base_buffer +
+		(bounce_buf_ctrl->next_to_use & (buffers_num - 1)) * size);
+
+	return buf;
+}
+
+#endif /* !(ENA_COM) */