Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 279 insertions, 0 deletions

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
new file mode 100644
index 000000000..73508fca5
--- /dev/null
+++ b/drivers/pcmcia/Kconfig
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PCCARD (PCMCIA/CardBus) bus subsystem configuration
+#
+
+menuconfig PCCARD
+	tristate "PCCard (PCMCIA/CardBus) support"
+	depends on !UML
+	help
+	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+	  computer.  These are credit-card size devices such as network cards,
+	  modems or hard drives often used with laptops computers.  There are
+	  actually two varieties of these cards: 16 bit PCMCIA and 32 bit
+	  CardBus cards.
+
+	  To compile this driver as modules, choose M here: the
+	  module will be called pcmcia_core.
+
+if PCCARD
+
+config PCMCIA
+	tristate "16-bit PCMCIA support"
+	select CRC32
+	default y
+	help
+	   This option enables support for 16-bit PCMCIA cards. Most older
+	   PC-cards are such 16-bit PCMCIA cards, so unless you know you're
+	   only using 32-bit CardBus cards, say Y or M here.
+
+	   To use 16-bit PCMCIA cards, you will need supporting software in
+	   most cases. (see the file <file:Documentation/Changes> for
+	   location and details).
+
+	   To compile this driver as modules, choose M here: the
+	   module will be called pcmcia.
+
+	   If unsure, say Y.
+
+config PCMCIA_LOAD_CIS
+	bool "Load CIS updates from userspace"
+	depends on PCMCIA
+	select FW_LOADER
+	default y
+	help
+	  Some PCMCIA cards require an updated Card Information Structure (CIS)
+	  to be loaded from userspace to work correctly. If you say Y here,
+	  and your userspace is arranged correctly, this will be loaded
+	  automatically using the in-kernel firmware loader and the hotplug
+	  subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
+
+	  If unsure, say Y.
+
+config CARDBUS
+	bool "32-bit CardBus support"
+	depends on PCI
+	default y
+	help
+	  CardBus is a bus mastering architecture for PC-cards, which allows
+	  for 32 bit PC-cards (the original PCMCIA standard specifies only
+	  a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
+
+	  To use 32 bit PC-cards, you also need a CardBus compatible host
+	  bridge. Virtually all modern PCMCIA bridges do this, and most of
+	  them are "yenta-compatible", so say Y or M there, too.
+
+	  If unsure, say Y.
+
+config PCMCIA_MAX1600
+	tristate
+
+comment "PC-card bridges"
+
+config YENTA
+	tristate "CardBus yenta-compatible bridge support"
+	depends on PCI
+	select CARDBUS if !EXPERT
+	select PCCARD_NONSTATIC if PCMCIA != n
+	help
+	  This option enables support for CardBus host bridges.  Virtually
+	  all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
+	  the hardware inside your computer that PCMCIA cards are plugged
+	  into.
+
+	  To compile this driver as modules, choose M here: the
+	  module will be called yenta_socket.
+
+	  If unsure, say Y.
+
+config YENTA_O2
+	default y
+	bool "Special initialization for O2Micro bridges" if EXPERT
+	depends on YENTA
+
+config YENTA_RICOH
+	default y
+	bool "Special initialization for Ricoh bridges" if EXPERT
+	depends on YENTA
+
+config YENTA_TI
+	default y
+	bool "Special initialization for TI and EnE bridges" if EXPERT
+	depends on YENTA
+
+config YENTA_ENE_TUNE
+	default y
+	bool "Auto-tune EnE bridges for CB cards" if EXPERT
+	depends on YENTA_TI && CARDBUS
+
+config YENTA_TOSHIBA
+	default y
+	bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
+	depends on YENTA
+
+config PD6729
+	tristate "Cirrus PD6729 compatible bridge support"
+	depends on PCMCIA && PCI
+	select PCCARD_NONSTATIC
+	help
+	  This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
+	  device, found in some older laptops and PCMCIA card readers.
+
+config I82092
+	tristate "i82092 compatible bridge support"
+	depends on PCMCIA && PCI
+	select PCCARD_NONSTATIC
+	help
+	  This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
+	  found in some older laptops and more commonly in evaluation boards for the
+	  chip.
+
+config I82365
+	tristate "i82365 compatible bridge support"
+	depends on PCMCIA && ISA
+	select PCCARD_NONSTATIC
+	help
+	  Say Y here to include support for ISA-bus PCMCIA host bridges that
+	  are register compatible with the Intel i82365.  These are found on
+	  older laptops and ISA-bus card readers for desktop systems.  A
+	  "bridge" is the hardware inside your computer that PCMCIA cards are
+	  plugged into. If unsure, say N.
+
+config TCIC
+	tristate "Databook TCIC host bridge support"
+	depends on PCMCIA && ISA
+	select PCCARD_NONSTATIC
+	help
+	  Say Y here to include support for the Databook TCIC family of PCMCIA
+	  host bridges. These are only found on a handful of old systems.
+	  "Bridge" is the name used for the hardware inside your computer that
+	  PCMCIA cards are plugged into. If unsure, say N.
+
+config PCMCIA_ALCHEMY_DEVBOARD
+	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
+	depends on MIPS_DB1XXX && PCMCIA
+	help
+	  Enable this driver of you want PCMCIA support on your Alchemy
+	  Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
+	  board.  NOT suitable for the PB1000!
+
+	  This driver is also available as a module called db1xxx_ss.ko
+
+config PCMCIA_XXS1500
+	tristate "MyCable XXS1500 PCMCIA socket support"
+	depends on PCMCIA && MIPS_XXS1500
+	help
+	  Support for the PCMCIA/CF socket interface on MyCable XXS1500
+	  systems.
+
+	  This driver is also available as a module called xxs1500_ss.ko
+
+config PCMCIA_BCM63XX
+	tristate "bcm63xx pcmcia support"
+	depends on BCM63XX && PCMCIA
+
+config PCMCIA_SOC_COMMON
+	tristate
+
+config PCMCIA_SA11XX_BASE
+	tristate
+
+config PCMCIA_SA1100
+	tristate "SA1100 support"
+	depends on ARM && ARCH_SA1100 && PCMCIA
+	select PCMCIA_SOC_COMMON
+	select PCMCIA_SA11XX_BASE
+	help
+	  Say Y here to include support for SA11x0-based PCMCIA or CF
+	  sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
+	  Xscale(R) embedded machines.
+
+	  This driver is also available as a module called sa1100_cs.
+
+config PCMCIA_SA1111
+	tristate "SA1111 support"
+	depends on ARM && SA1111 && PCMCIA
+	select PCMCIA_SOC_COMMON
+	select PCMCIA_SA11XX_BASE if ARCH_SA1100
+	select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111
+	select PCMCIA_MAX1600 if ASSABET_NEPONSET
+	select PCMCIA_MAX1600 if ARCH_LUBBOCK && SA1111
+	help
+	  Say Y  here to include support for SA1111-based PCMCIA or CF
+	  sockets, found on the Jornada 720, Graphicsmaster and other
+	  StrongARM(R)/Xscale(R) embedded machines.
+
+	  This driver is also available as a module called sa1111_cs.
+
+config PCMCIA_PXA2XX
+	tristate "PXA2xx support"
+	depends on ARM && ARCH_PXA && PCMCIA
+	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
+		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
+		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
+		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
+		    || MACH_COLIBRI320 || MACH_H4700)
+	select PCMCIA_SOC_COMMON
+	select PCMCIA_MAX1600 if MACH_MAINSTONE
+	help
+	  Say Y here to include support for the PXA2xx PCMCIA controller
+
+config PCMCIA_DEBUG
+	bool "Enable debugging"
+	depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
+	help
+	  Say Y here to enable debugging for the SoC PCMCIA layer.
+	  You will need to choose the debugging level either via the
+	  kernel command line, or module options depending whether
+	  you build the drivers as modules.
+
+	  The kernel command line options are:
+	    sa11xx_core.pc_debug=N
+	    pxa2xx_core.pc_debug=N
+
+	  The module option is called pc_debug=N
+
+	  In all the above examples, N is the debugging verbosity
+	  level.
+
+config PCMCIA_PROBE
+	bool
+	default y if ISA && !ARCH_SA1100 && !PARISC
+
+config PCMCIA_VRC4171
+	tristate "NEC VRC4171 Card Controllers support"
+	depends on CPU_VR41XX && ISA && PCMCIA
+
+config PCMCIA_VRC4173
+	tristate "NEC VRC4173 CARDU support"
+	depends on CPU_VR41XX && PCI && PCMCIA
+
+config OMAP_CF
+	tristate "OMAP CompactFlash Controller"
+	depends on PCMCIA && ARCH_OMAP16XX
+	help
+	  Say Y here to support the CompactFlash controller on OMAP.
+	  Note that this doesn't support "True IDE" mode.
+
+config AT91_CF
+	tristate "AT91 CompactFlash Controller"
+	depends on PCI
+	depends on PCMCIA && ARCH_AT91
+	help
+	  Say Y here to support the CompactFlash controller on AT91 chips.
+	  Or choose M to compile the driver as a module named "at91_cf".
+
+config ELECTRA_CF
+	tristate "Electra CompactFlash Controller"
+	depends on PCMCIA && PPC_PASEMI
+	help
+	  Say Y here to support the CompactFlash controller on the
+	  PA Semi Electra eval board.
+
+config PCCARD_NONSTATIC
+	bool
+
+config PCCARD_IODYN
+	bool
+
+endif	# PCCARD