Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1282 insertions, 0 deletions

diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
new file mode 100644
index 000000000..6fbfcab49
--- /dev/null
+++ b/drivers/perf/arm_spe_pmu.c
@@ -0,0 +1,1282 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Perf support for the Statistical Profiling Extension, introduced as
+ * part of ARMv8.2.
+ *
+ * Copyright (C) 2016 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#define PMUNAME					"arm_spe"
+#define DRVNAME					PMUNAME "_pmu"
+#define pr_fmt(fmt)				DRVNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/capability.h>
+#include <linux/cpuhotplug.h>
+#include <linux/cpumask.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/perf_event.h>
+#include <linux/perf/arm_pmu.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/vmalloc.h>
+
+#include <asm/barrier.h>
+#include <asm/cpufeature.h>
+#include <asm/mmu.h>
+#include <asm/sysreg.h>
+
+/*
+ * Cache if the event is allowed to trace Context information.
+ * This allows us to perform the check, i.e, perfmon_capable(),
+ * in the context of the event owner, once, during the event_init().
+ */
+#define SPE_PMU_HW_FLAGS_CX			BIT(0)
+
+static void set_spe_event_has_cx(struct perf_event *event)
+{
+	if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && perfmon_capable())
+		event->hw.flags |= SPE_PMU_HW_FLAGS_CX;
+}
+
+static bool get_spe_event_has_cx(struct perf_event *event)
+{
+	return !!(event->hw.flags & SPE_PMU_HW_FLAGS_CX);
+}
+
+#define ARM_SPE_BUF_PAD_BYTE			0
+
+struct arm_spe_pmu_buf {
+	int					nr_pages;
+	bool					snapshot;
+	void					*base;
+};
+
+struct arm_spe_pmu {
+	struct pmu				pmu;
+	struct platform_device			*pdev;
+	cpumask_t				supported_cpus;
+	struct hlist_node			hotplug_node;
+
+	int					irq; /* PPI */
+
+	u16					min_period;
+	u16					counter_sz;
+
+#define SPE_PMU_FEAT_FILT_EVT			(1UL << 0)
+#define SPE_PMU_FEAT_FILT_TYP			(1UL << 1)
+#define SPE_PMU_FEAT_FILT_LAT			(1UL << 2)
+#define SPE_PMU_FEAT_ARCH_INST			(1UL << 3)
+#define SPE_PMU_FEAT_LDS			(1UL << 4)
+#define SPE_PMU_FEAT_ERND			(1UL << 5)
+#define SPE_PMU_FEAT_DEV_PROBED			(1UL << 63)
+	u64					features;
+
+	u16					max_record_sz;
+	u16					align;
+	struct perf_output_handle __percpu	*handle;
+};
+
+#define to_spe_pmu(p) (container_of(p, struct arm_spe_pmu, pmu))
+
+/* Convert a free-running index from perf into an SPE buffer offset */
+#define PERF_IDX2OFF(idx, buf)	((idx) % ((buf)->nr_pages << PAGE_SHIFT))
+
+/* Keep track of our dynamic hotplug state */
+static enum cpuhp_state arm_spe_pmu_online;
+
+enum arm_spe_pmu_buf_fault_action {
+	SPE_PMU_BUF_FAULT_ACT_SPURIOUS,
+	SPE_PMU_BUF_FAULT_ACT_FATAL,
+	SPE_PMU_BUF_FAULT_ACT_OK,
+};
+
+/* This sysfs gunk was really good fun to write. */
+enum arm_spe_pmu_capabilities {
+	SPE_PMU_CAP_ARCH_INST = 0,
+	SPE_PMU_CAP_ERND,
+	SPE_PMU_CAP_FEAT_MAX,
+	SPE_PMU_CAP_CNT_SZ = SPE_PMU_CAP_FEAT_MAX,
+	SPE_PMU_CAP_MIN_IVAL,
+};
+
+static int arm_spe_pmu_feat_caps[SPE_PMU_CAP_FEAT_MAX] = {
+	[SPE_PMU_CAP_ARCH_INST]	= SPE_PMU_FEAT_ARCH_INST,
+	[SPE_PMU_CAP_ERND]	= SPE_PMU_FEAT_ERND,
+};
+
+static u32 arm_spe_pmu_cap_get(struct arm_spe_pmu *spe_pmu, int cap)
+{
+	if (cap < SPE_PMU_CAP_FEAT_MAX)
+		return !!(spe_pmu->features & arm_spe_pmu_feat_caps[cap]);
+
+	switch (cap) {
+	case SPE_PMU_CAP_CNT_SZ:
+		return spe_pmu->counter_sz;
+	case SPE_PMU_CAP_MIN_IVAL:
+		return spe_pmu->min_period;
+	default:
+		WARN(1, "unknown cap %d\n", cap);
+	}
+
+	return 0;
+}
+
+static ssize_t arm_spe_pmu_cap_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
+	struct dev_ext_attribute *ea =
+		container_of(attr, struct dev_ext_attribute, attr);
+	int cap = (long)ea->var;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n",
+		arm_spe_pmu_cap_get(spe_pmu, cap));
+}
+
+#define SPE_EXT_ATTR_ENTRY(_name, _func, _var)				\
+	&((struct dev_ext_attribute[]) {				\
+		{ __ATTR(_name, S_IRUGO, _func, NULL), (void *)_var }	\
+	})[0].attr.attr
+
+#define SPE_CAP_EXT_ATTR_ENTRY(_name, _var)				\
+	SPE_EXT_ATTR_ENTRY(_name, arm_spe_pmu_cap_show, _var)
+
+static struct attribute *arm_spe_pmu_cap_attr[] = {
+	SPE_CAP_EXT_ATTR_ENTRY(arch_inst, SPE_PMU_CAP_ARCH_INST),
+	SPE_CAP_EXT_ATTR_ENTRY(ernd, SPE_PMU_CAP_ERND),
+	SPE_CAP_EXT_ATTR_ENTRY(count_size, SPE_PMU_CAP_CNT_SZ),
+	SPE_CAP_EXT_ATTR_ENTRY(min_interval, SPE_PMU_CAP_MIN_IVAL),
+	NULL,
+};
+
+static struct attribute_group arm_spe_pmu_cap_group = {
+	.name	= "caps",
+	.attrs	= arm_spe_pmu_cap_attr,
+};
+
+/* User ABI */
+#define ATTR_CFG_FLD_ts_enable_CFG		config	/* PMSCR_EL1.TS */
+#define ATTR_CFG_FLD_ts_enable_LO		0
+#define ATTR_CFG_FLD_ts_enable_HI		0
+#define ATTR_CFG_FLD_pa_enable_CFG		config	/* PMSCR_EL1.PA */
+#define ATTR_CFG_FLD_pa_enable_LO		1
+#define ATTR_CFG_FLD_pa_enable_HI		1
+#define ATTR_CFG_FLD_pct_enable_CFG		config	/* PMSCR_EL1.PCT */
+#define ATTR_CFG_FLD_pct_enable_LO		2
+#define ATTR_CFG_FLD_pct_enable_HI		2
+#define ATTR_CFG_FLD_jitter_CFG			config	/* PMSIRR_EL1.RND */
+#define ATTR_CFG_FLD_jitter_LO			16
+#define ATTR_CFG_FLD_jitter_HI			16
+#define ATTR_CFG_FLD_branch_filter_CFG		config	/* PMSFCR_EL1.B */
+#define ATTR_CFG_FLD_branch_filter_LO		32
+#define ATTR_CFG_FLD_branch_filter_HI		32
+#define ATTR_CFG_FLD_load_filter_CFG		config	/* PMSFCR_EL1.LD */
+#define ATTR_CFG_FLD_load_filter_LO		33
+#define ATTR_CFG_FLD_load_filter_HI		33
+#define ATTR_CFG_FLD_store_filter_CFG		config	/* PMSFCR_EL1.ST */
+#define ATTR_CFG_FLD_store_filter_LO		34
+#define ATTR_CFG_FLD_store_filter_HI		34
+
+#define ATTR_CFG_FLD_event_filter_CFG		config1	/* PMSEVFR_EL1 */
+#define ATTR_CFG_FLD_event_filter_LO		0
+#define ATTR_CFG_FLD_event_filter_HI		63
+
+#define ATTR_CFG_FLD_min_latency_CFG		config2	/* PMSLATFR_EL1.MINLAT */
+#define ATTR_CFG_FLD_min_latency_LO		0
+#define ATTR_CFG_FLD_min_latency_HI		11
+
+/* Why does everything I do descend into this? */
+#define __GEN_PMU_FORMAT_ATTR(cfg, lo, hi)				\
+	(lo) == (hi) ? #cfg ":" #lo "\n" : #cfg ":" #lo "-" #hi
+
+#define _GEN_PMU_FORMAT_ATTR(cfg, lo, hi)				\
+	__GEN_PMU_FORMAT_ATTR(cfg, lo, hi)
+
+#define GEN_PMU_FORMAT_ATTR(name)					\
+	PMU_FORMAT_ATTR(name,						\
+	_GEN_PMU_FORMAT_ATTR(ATTR_CFG_FLD_##name##_CFG,			\
+			     ATTR_CFG_FLD_##name##_LO,			\
+			     ATTR_CFG_FLD_##name##_HI))
+
+#define _ATTR_CFG_GET_FLD(attr, cfg, lo, hi)				\
+	((((attr)->cfg) >> lo) & GENMASK(hi - lo, 0))
+
+#define ATTR_CFG_GET_FLD(attr, name)					\
+	_ATTR_CFG_GET_FLD(attr,						\
+			  ATTR_CFG_FLD_##name##_CFG,			\
+			  ATTR_CFG_FLD_##name##_LO,			\
+			  ATTR_CFG_FLD_##name##_HI)
+
+GEN_PMU_FORMAT_ATTR(ts_enable);
+GEN_PMU_FORMAT_ATTR(pa_enable);
+GEN_PMU_FORMAT_ATTR(pct_enable);
+GEN_PMU_FORMAT_ATTR(jitter);
+GEN_PMU_FORMAT_ATTR(branch_filter);
+GEN_PMU_FORMAT_ATTR(load_filter);
+GEN_PMU_FORMAT_ATTR(store_filter);
+GEN_PMU_FORMAT_ATTR(event_filter);
+GEN_PMU_FORMAT_ATTR(min_latency);
+
+static struct attribute *arm_spe_pmu_formats_attr[] = {
+	&format_attr_ts_enable.attr,
+	&format_attr_pa_enable.attr,
+	&format_attr_pct_enable.attr,
+	&format_attr_jitter.attr,
+	&format_attr_branch_filter.attr,
+	&format_attr_load_filter.attr,
+	&format_attr_store_filter.attr,
+	&format_attr_event_filter.attr,
+	&format_attr_min_latency.attr,
+	NULL,
+};
+
+static struct attribute_group arm_spe_pmu_format_group = {
+	.name	= "format",
+	.attrs	= arm_spe_pmu_formats_attr,
+};
+
+static ssize_t arm_spe_pmu_get_attr_cpumask(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
+
+	return cpumap_print_to_pagebuf(true, buf, &spe_pmu->supported_cpus);
+}
+static DEVICE_ATTR(cpumask, S_IRUGO, arm_spe_pmu_get_attr_cpumask, NULL);
+
+static struct attribute *arm_spe_pmu_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static struct attribute_group arm_spe_pmu_group = {
+	.attrs	= arm_spe_pmu_attrs,
+};
+
+static const struct attribute_group *arm_spe_pmu_attr_groups[] = {
+	&arm_spe_pmu_group,
+	&arm_spe_pmu_cap_group,
+	&arm_spe_pmu_format_group,
+	NULL,
+};
+
+/* Convert between user ABI and register values */
+static u64 arm_spe_event_to_pmscr(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	u64 reg = 0;
+
+	reg |= ATTR_CFG_GET_FLD(attr, ts_enable) << SYS_PMSCR_EL1_TS_SHIFT;
+	reg |= ATTR_CFG_GET_FLD(attr, pa_enable) << SYS_PMSCR_EL1_PA_SHIFT;
+	reg |= ATTR_CFG_GET_FLD(attr, pct_enable) << SYS_PMSCR_EL1_PCT_SHIFT;
+
+	if (!attr->exclude_user)
+		reg |= BIT(SYS_PMSCR_EL1_E0SPE_SHIFT);
+
+	if (!attr->exclude_kernel)
+		reg |= BIT(SYS_PMSCR_EL1_E1SPE_SHIFT);
+
+	if (get_spe_event_has_cx(event))
+		reg |= BIT(SYS_PMSCR_EL1_CX_SHIFT);
+
+	return reg;
+}
+
+static void arm_spe_event_sanitise_period(struct perf_event *event)
+{
+	struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+	u64 period = event->hw.sample_period;
+	u64 max_period = SYS_PMSIRR_EL1_INTERVAL_MASK
+			 << SYS_PMSIRR_EL1_INTERVAL_SHIFT;
+
+	if (period < spe_pmu->min_period)
+		period = spe_pmu->min_period;
+	else if (period > max_period)
+		period = max_period;
+	else
+		period &= max_period;
+
+	event->hw.sample_period = period;
+}
+
+static u64 arm_spe_event_to_pmsirr(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	u64 reg = 0;
+
+	arm_spe_event_sanitise_period(event);
+
+	reg |= ATTR_CFG_GET_FLD(attr, jitter) << SYS_PMSIRR_EL1_RND_SHIFT;
+	reg |= event->hw.sample_period;
+
+	return reg;
+}
+
+static u64 arm_spe_event_to_pmsfcr(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	u64 reg = 0;
+
+	reg |= ATTR_CFG_GET_FLD(attr, load_filter) << SYS_PMSFCR_EL1_LD_SHIFT;
+	reg |= ATTR_CFG_GET_FLD(attr, store_filter) << SYS_PMSFCR_EL1_ST_SHIFT;
+	reg |= ATTR_CFG_GET_FLD(attr, branch_filter) << SYS_PMSFCR_EL1_B_SHIFT;
+
+	if (reg)
+		reg |= BIT(SYS_PMSFCR_EL1_FT_SHIFT);
+
+	if (ATTR_CFG_GET_FLD(attr, event_filter))
+		reg |= BIT(SYS_PMSFCR_EL1_FE_SHIFT);
+
+	if (ATTR_CFG_GET_FLD(attr, min_latency))
+		reg |= BIT(SYS_PMSFCR_EL1_FL_SHIFT);
+
+	return reg;
+}
+
+static u64 arm_spe_event_to_pmsevfr(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	return ATTR_CFG_GET_FLD(attr, event_filter);
+}
+
+static u64 arm_spe_event_to_pmslatfr(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	return ATTR_CFG_GET_FLD(attr, min_latency)
+	       << SYS_PMSLATFR_EL1_MINLAT_SHIFT;
+}
+
+static void arm_spe_pmu_pad_buf(struct perf_output_handle *handle, int len)
+{
+	struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+	u64 head = PERF_IDX2OFF(handle->head, buf);
+
+	memset(buf->base + head, ARM_SPE_BUF_PAD_BYTE, len);
+	if (!buf->snapshot)
+		perf_aux_output_skip(handle, len);
+}
+
+static u64 arm_spe_pmu_next_snapshot_off(struct perf_output_handle *handle)
+{
+	struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+	struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
+	u64 head = PERF_IDX2OFF(handle->head, buf);
+	u64 limit = buf->nr_pages * PAGE_SIZE;
+
+	/*
+	 * The trace format isn't parseable in reverse, so clamp
+	 * the limit to half of the buffer size in snapshot mode
+	 * so that the worst case is half a buffer of records, as
+	 * opposed to a single record.
+	 */
+	if (head < limit >> 1)
+		limit >>= 1;
+
+	/*
+	 * If we're within max_record_sz of the limit, we must
+	 * pad, move the head index and recompute the limit.
+	 */
+	if (limit - head < spe_pmu->max_record_sz) {
+		arm_spe_pmu_pad_buf(handle, limit - head);
+		handle->head = PERF_IDX2OFF(limit, buf);
+		limit = ((buf->nr_pages * PAGE_SIZE) >> 1) + handle->head;
+	}
+
+	return limit;
+}
+
+static u64 __arm_spe_pmu_next_off(struct perf_output_handle *handle)
+{
+	struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
+	struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+	const u64 bufsize = buf->nr_pages * PAGE_SIZE;
+	u64 limit = bufsize;
+	u64 head, tail, wakeup;
+
+	/*
+	 * The head can be misaligned for two reasons:
+	 *
+	 * 1. The hardware left PMBPTR pointing to the first byte after
+	 *    a record when generating a buffer management event.
+	 *
+	 * 2. We used perf_aux_output_skip to consume handle->size bytes
+	 *    and CIRC_SPACE was used to compute the size, which always
+	 *    leaves one entry free.
+	 *
+	 * Deal with this by padding to the next alignment boundary and
+	 * moving the head index. If we run out of buffer space, we'll
+	 * reduce handle->size to zero and end up reporting truncation.
+	 */
+	head = PERF_IDX2OFF(handle->head, buf);
+	if (!IS_ALIGNED(head, spe_pmu->align)) {
+		unsigned long delta = roundup(head, spe_pmu->align) - head;
+
+		delta = min(delta, handle->size);
+		arm_spe_pmu_pad_buf(handle, delta);
+		head = PERF_IDX2OFF(handle->head, buf);
+	}
+
+	/* If we've run out of free space, then nothing more to do */
+	if (!handle->size)
+		goto no_space;
+
+	/* Compute the tail and wakeup indices now that we've aligned head */
+	tail = PERF_IDX2OFF(handle->head + handle->size, buf);
+	wakeup = PERF_IDX2OFF(handle->wakeup, buf);
+
+	/*
+	 * Avoid clobbering unconsumed data. We know we have space, so
+	 * if we see head == tail we know that the buffer is empty. If
+	 * head > tail, then there's nothing to clobber prior to
+	 * wrapping.
+	 */
+	if (head < tail)
+		limit = round_down(tail, PAGE_SIZE);
+
+	/*
+	 * Wakeup may be arbitrarily far into the future. If it's not in
+	 * the current generation, either we'll wrap before hitting it,
+	 * or it's in the past and has been handled already.
+	 *
+	 * If there's a wakeup before we wrap, arrange to be woken up by
+	 * the page boundary following it. Keep the tail boundary if
+	 * that's lower.
+	 */
+	if (handle->wakeup < (handle->head + handle->size) && head <= wakeup)
+		limit = min(limit, round_up(wakeup, PAGE_SIZE));
+
+	if (limit > head)
+		return limit;
+
+	arm_spe_pmu_pad_buf(handle, handle->size);
+no_space:
+	perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+	perf_aux_output_end(handle, 0);
+	return 0;
+}
+
+static u64 arm_spe_pmu_next_off(struct perf_output_handle *handle)
+{
+	struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+	struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
+	u64 limit = __arm_spe_pmu_next_off(handle);
+	u64 head = PERF_IDX2OFF(handle->head, buf);
+
+	/*
+	 * If the head has come too close to the end of the buffer,
+	 * then pad to the end and recompute the limit.
+	 */
+	if (limit && (limit - head < spe_pmu->max_record_sz)) {
+		arm_spe_pmu_pad_buf(handle, limit - head);
+		limit = __arm_spe_pmu_next_off(handle);
+	}
+
+	return limit;
+}
+
+static void arm_spe_perf_aux_output_begin(struct perf_output_handle *handle,
+					  struct perf_event *event)
+{
+	u64 base, limit;
+	struct arm_spe_pmu_buf *buf;
+
+	/* Start a new aux session */
+	buf = perf_aux_output_begin(handle, event);
+	if (!buf) {
+		event->hw.state |= PERF_HES_STOPPED;
+		/*
+		 * We still need to clear the limit pointer, since the
+		 * profiler might only be disabled by virtue of a fault.
+		 */
+		limit = 0;
+		goto out_write_limit;
+	}
+
+	limit = buf->snapshot ? arm_spe_pmu_next_snapshot_off(handle)
+			      : arm_spe_pmu_next_off(handle);
+	if (limit)
+		limit |= BIT(SYS_PMBLIMITR_EL1_E_SHIFT);
+
+	limit += (u64)buf->base;
+	base = (u64)buf->base + PERF_IDX2OFF(handle->head, buf);
+	write_sysreg_s(base, SYS_PMBPTR_EL1);
+
+out_write_limit:
+	write_sysreg_s(limit, SYS_PMBLIMITR_EL1);
+}
+
+static void arm_spe_perf_aux_output_end(struct perf_output_handle *handle)
+{
+	struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+	u64 offset, size;
+
+	offset = read_sysreg_s(SYS_PMBPTR_EL1) - (u64)buf->base;
+	size = offset - PERF_IDX2OFF(handle->head, buf);
+
+	if (buf->snapshot)
+		handle->head = offset;
+
+	perf_aux_output_end(handle, size);
+}
+
+static void arm_spe_pmu_disable_and_drain_local(void)
+{
+	/* Disable profiling at EL0 and EL1 */
+	write_sysreg_s(0, SYS_PMSCR_EL1);
+	isb();
+
+	/* Drain any buffered data */
+	psb_csync();
+	dsb(nsh);
+
+	/* Disable the profiling buffer */
+	write_sysreg_s(0, SYS_PMBLIMITR_EL1);
+	isb();
+}
+
+/* IRQ handling */
+static enum arm_spe_pmu_buf_fault_action
+arm_spe_pmu_buf_get_fault_act(struct perf_output_handle *handle)
+{
+	const char *err_str;
+	u64 pmbsr;
+	enum arm_spe_pmu_buf_fault_action ret;
+
+	/*
+	 * Ensure new profiling data is visible to the CPU and any external
+	 * aborts have been resolved.
+	 */
+	psb_csync();
+	dsb(nsh);
+
+	/* Ensure hardware updates to PMBPTR_EL1 are visible */
+	isb();
+
+	/* Service required? */
+	pmbsr = read_sysreg_s(SYS_PMBSR_EL1);
+	if (!(pmbsr & BIT(SYS_PMBSR_EL1_S_SHIFT)))
+		return SPE_PMU_BUF_FAULT_ACT_SPURIOUS;
+
+	/*
+	 * If we've lost data, disable profiling and also set the PARTIAL
+	 * flag to indicate that the last record is corrupted.
+	 */
+	if (pmbsr & BIT(SYS_PMBSR_EL1_DL_SHIFT))
+		perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED |
+					     PERF_AUX_FLAG_PARTIAL);
+
+	/* Report collisions to userspace so that it can up the period */
+	if (pmbsr & BIT(SYS_PMBSR_EL1_COLL_SHIFT))
+		perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION);
+
+	/* We only expect buffer management events */
+	switch (pmbsr & (SYS_PMBSR_EL1_EC_MASK << SYS_PMBSR_EL1_EC_SHIFT)) {
+	case SYS_PMBSR_EL1_EC_BUF:
+		/* Handled below */
+		break;
+	case SYS_PMBSR_EL1_EC_FAULT_S1:
+	case SYS_PMBSR_EL1_EC_FAULT_S2:
+		err_str = "Unexpected buffer fault";
+		goto out_err;
+	default:
+		err_str = "Unknown error code";
+		goto out_err;
+	}
+
+	/* Buffer management event */
+	switch (pmbsr &
+		(SYS_PMBSR_EL1_BUF_BSC_MASK << SYS_PMBSR_EL1_BUF_BSC_SHIFT)) {
+	case SYS_PMBSR_EL1_BUF_BSC_FULL:
+		ret = SPE_PMU_BUF_FAULT_ACT_OK;
+		goto out_stop;
+	default:
+		err_str = "Unknown buffer status code";
+	}
+
+out_err:
+	pr_err_ratelimited("%s on CPU %d [PMBSR=0x%016llx, PMBPTR=0x%016llx, PMBLIMITR=0x%016llx]\n",
+			   err_str, smp_processor_id(), pmbsr,
+			   read_sysreg_s(SYS_PMBPTR_EL1),
+			   read_sysreg_s(SYS_PMBLIMITR_EL1));
+	ret = SPE_PMU_BUF_FAULT_ACT_FATAL;
+
+out_stop:
+	arm_spe_perf_aux_output_end(handle);
+	return ret;
+}
+
+static irqreturn_t arm_spe_pmu_irq_handler(int irq, void *dev)
+{
+	struct perf_output_handle *handle = dev;
+	struct perf_event *event = handle->event;
+	enum arm_spe_pmu_buf_fault_action act;
+
+	if (!perf_get_aux(handle))
+		return IRQ_NONE;
+
+	act = arm_spe_pmu_buf_get_fault_act(handle);
+	if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
+		return IRQ_NONE;
+
+	/*
+	 * Ensure perf callbacks have completed, which may disable the
+	 * profiling buffer in response to a TRUNCATION flag.
+	 */
+	irq_work_run();
+
+	switch (act) {
+	case SPE_PMU_BUF_FAULT_ACT_FATAL:
+		/*
+		 * If a fatal exception occurred then leaving the profiling
+		 * buffer enabled is a recipe waiting to happen. Since
+		 * fatal faults don't always imply truncation, make sure
+		 * that the profiling buffer is disabled explicitly before
+		 * clearing the syndrome register.
+		 */
+		arm_spe_pmu_disable_and_drain_local();
+		break;
+	case SPE_PMU_BUF_FAULT_ACT_OK:
+		/*
+		 * We handled the fault (the buffer was full), so resume
+		 * profiling as long as we didn't detect truncation.
+		 * PMBPTR might be misaligned, but we'll burn that bridge
+		 * when we get to it.
+		 */
+		if (!(handle->aux_flags & PERF_AUX_FLAG_TRUNCATED)) {
+			arm_spe_perf_aux_output_begin(handle, event);
+			isb();
+		}
+		break;
+	case SPE_PMU_BUF_FAULT_ACT_SPURIOUS:
+		/* We've seen you before, but GCC has the memory of a sieve. */
+		break;
+	}
+
+	/* The buffer pointers are now sane, so resume profiling. */
+	write_sysreg_s(0, SYS_PMBSR_EL1);
+	return IRQ_HANDLED;
+}
+
+/* Perf callbacks */
+static int arm_spe_pmu_event_init(struct perf_event *event)
+{
+	u64 reg;
+	struct perf_event_attr *attr = &event->attr;
+	struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+
+	/* This is, of course, deeply driver-specific */
+	if (attr->type != event->pmu->type)
+		return -ENOENT;
+
+	if (event->cpu >= 0 &&
+	    !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
+		return -ENOENT;
+
+	if (arm_spe_event_to_pmsevfr(event) & SYS_PMSEVFR_EL1_RES0)
+		return -EOPNOTSUPP;
+
+	if (attr->exclude_idle)
+		return -EOPNOTSUPP;
+
+	/*
+	 * Feedback-directed frequency throttling doesn't work when we
+	 * have a buffer of samples. We'd need to manually count the
+	 * samples in the buffer when it fills up and adjust the event
+	 * count to reflect that. Instead, just force the user to specify
+	 * a sample period.
+	 */
+	if (attr->freq)
+		return -EINVAL;
+
+	reg = arm_spe_event_to_pmsfcr(event);
+	if ((reg & BIT(SYS_PMSFCR_EL1_FE_SHIFT)) &&
+	    !(spe_pmu->features & SPE_PMU_FEAT_FILT_EVT))
+		return -EOPNOTSUPP;
+
+	if ((reg & BIT(SYS_PMSFCR_EL1_FT_SHIFT)) &&
+	    !(spe_pmu->features & SPE_PMU_FEAT_FILT_TYP))
+		return -EOPNOTSUPP;
+
+	if ((reg & BIT(SYS_PMSFCR_EL1_FL_SHIFT)) &&
+	    !(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
+		return -EOPNOTSUPP;
+
+	set_spe_event_has_cx(event);
+	reg = arm_spe_event_to_pmscr(event);
+	if (!perfmon_capable() &&
+	    (reg & (BIT(SYS_PMSCR_EL1_PA_SHIFT) |
+		    BIT(SYS_PMSCR_EL1_PCT_SHIFT))))
+		return -EACCES;
+
+	return 0;
+}
+
+static void arm_spe_pmu_start(struct perf_event *event, int flags)
+{
+	u64 reg;
+	struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
+
+	hwc->state = 0;
+	arm_spe_perf_aux_output_begin(handle, event);
+	if (hwc->state)
+		return;
+
+	reg = arm_spe_event_to_pmsfcr(event);
+	write_sysreg_s(reg, SYS_PMSFCR_EL1);
+
+	reg = arm_spe_event_to_pmsevfr(event);
+	write_sysreg_s(reg, SYS_PMSEVFR_EL1);
+
+	reg = arm_spe_event_to_pmslatfr(event);
+	write_sysreg_s(reg, SYS_PMSLATFR_EL1);
+
+	if (flags & PERF_EF_RELOAD) {
+		reg = arm_spe_event_to_pmsirr(event);
+		write_sysreg_s(reg, SYS_PMSIRR_EL1);
+		isb();
+		reg = local64_read(&hwc->period_left);
+		write_sysreg_s(reg, SYS_PMSICR_EL1);
+	}
+
+	reg = arm_spe_event_to_pmscr(event);
+	isb();
+	write_sysreg_s(reg, SYS_PMSCR_EL1);
+}
+
+static void arm_spe_pmu_stop(struct perf_event *event, int flags)
+{
+	struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
+
+	/* If we're already stopped, then nothing to do */
+	if (hwc->state & PERF_HES_STOPPED)
+		return;
+
+	/* Stop all trace generation */
+	arm_spe_pmu_disable_and_drain_local();
+
+	if (flags & PERF_EF_UPDATE) {
+		/*
+		 * If there's a fault pending then ensure we contain it
+		 * to this buffer, since we might be on the context-switch
+		 * path.
+		 */
+		if (perf_get_aux(handle)) {
+			enum arm_spe_pmu_buf_fault_action act;
+
+			act = arm_spe_pmu_buf_get_fault_act(handle);
+			if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
+				arm_spe_perf_aux_output_end(handle);
+			else
+				write_sysreg_s(0, SYS_PMBSR_EL1);
+		}
+
+		/*
+		 * This may also contain ECOUNT, but nobody else should
+		 * be looking at period_left, since we forbid frequency
+		 * based sampling.
+		 */
+		local64_set(&hwc->period_left, read_sysreg_s(SYS_PMSICR_EL1));
+		hwc->state |= PERF_HES_UPTODATE;
+	}
+
+	hwc->state |= PERF_HES_STOPPED;
+}
+
+static int arm_spe_pmu_add(struct perf_event *event, int flags)
+{
+	int ret = 0;
+	struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	int cpu = event->cpu == -1 ? smp_processor_id() : event->cpu;
+
+	if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+		return -ENOENT;
+
+	hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+
+	if (flags & PERF_EF_START) {
+		arm_spe_pmu_start(event, PERF_EF_RELOAD);
+		if (hwc->state & PERF_HES_STOPPED)
+			ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void arm_spe_pmu_del(struct perf_event *event, int flags)
+{
+	arm_spe_pmu_stop(event, PERF_EF_UPDATE);
+}
+
+static void arm_spe_pmu_read(struct perf_event *event)
+{
+}
+
+static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages,
+				   int nr_pages, bool snapshot)
+{
+	int i, cpu = event->cpu;
+	struct page **pglist;
+	struct arm_spe_pmu_buf *buf;
+
+	/* We need at least two pages for this to work. */
+	if (nr_pages < 2)
+		return NULL;
+
+	/*
+	 * We require an even number of pages for snapshot mode, so that
+	 * we can effectively treat the buffer as consisting of two equal
+	 * parts and give userspace a fighting chance of getting some
+	 * useful data out of it.
+	 */
+	if (snapshot && (nr_pages & 1))
+		return NULL;
+
+	if (cpu == -1)
+		cpu = raw_smp_processor_id();
+
+	buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, cpu_to_node(cpu));
+	if (!buf)
+		return NULL;
+
+	pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
+	if (!pglist)
+		goto out_free_buf;
+
+	for (i = 0; i < nr_pages; ++i)
+		pglist[i] = virt_to_page(pages[i]);
+
+	buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
+	if (!buf->base)
+		goto out_free_pglist;
+
+	buf->nr_pages	= nr_pages;
+	buf->snapshot	= snapshot;
+
+	kfree(pglist);
+	return buf;
+
+out_free_pglist:
+	kfree(pglist);
+out_free_buf:
+	kfree(buf);
+	return NULL;
+}
+
+static void arm_spe_pmu_free_aux(void *aux)
+{
+	struct arm_spe_pmu_buf *buf = aux;
+
+	vunmap(buf->base);
+	kfree(buf);
+}
+
+/* Initialisation and teardown functions */
+static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu)
+{
+	static atomic_t pmu_idx = ATOMIC_INIT(-1);
+
+	int idx;
+	char *name;
+	struct device *dev = &spe_pmu->pdev->dev;
+
+	spe_pmu->pmu = (struct pmu) {
+		.module = THIS_MODULE,
+		.capabilities	= PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
+		.attr_groups	= arm_spe_pmu_attr_groups,
+		/*
+		 * We hitch a ride on the software context here, so that
+		 * we can support per-task profiling (which is not possible
+		 * with the invalid context as it doesn't get sched callbacks).
+		 * This requires that userspace either uses a dummy event for
+		 * perf_event_open, since the aux buffer is not setup until
+		 * a subsequent mmap, or creates the profiling event in a
+		 * disabled state and explicitly PERF_EVENT_IOC_ENABLEs it
+		 * once the buffer has been created.
+		 */
+		.task_ctx_nr	= perf_sw_context,
+		.event_init	= arm_spe_pmu_event_init,
+		.add		= arm_spe_pmu_add,
+		.del		= arm_spe_pmu_del,
+		.start		= arm_spe_pmu_start,
+		.stop		= arm_spe_pmu_stop,
+		.read		= arm_spe_pmu_read,
+		.setup_aux	= arm_spe_pmu_setup_aux,
+		.free_aux	= arm_spe_pmu_free_aux,
+	};
+
+	idx = atomic_inc_return(&pmu_idx);
+	name = devm_kasprintf(dev, GFP_KERNEL, "%s_%d", PMUNAME, idx);
+	if (!name) {
+		dev_err(dev, "failed to allocate name for pmu %d\n", idx);
+		return -ENOMEM;
+	}
+
+	return perf_pmu_register(&spe_pmu->pmu, name, -1);
+}
+
+static void arm_spe_pmu_perf_destroy(struct arm_spe_pmu *spe_pmu)
+{
+	perf_pmu_unregister(&spe_pmu->pmu);
+}
+
+static void __arm_spe_pmu_dev_probe(void *info)
+{
+	int fld;
+	u64 reg;
+	struct arm_spe_pmu *spe_pmu = info;
+	struct device *dev = &spe_pmu->pdev->dev;
+
+	fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64DFR0_EL1),
+						   ID_AA64DFR0_PMSVER_SHIFT);
+	if (!fld) {
+		dev_err(dev,
+			"unsupported ID_AA64DFR0_EL1.PMSVer [%d] on CPU %d\n",
+			fld, smp_processor_id());
+		return;
+	}
+
+	/* Read PMBIDR first to determine whether or not we have access */
+	reg = read_sysreg_s(SYS_PMBIDR_EL1);
+	if (reg & BIT(SYS_PMBIDR_EL1_P_SHIFT)) {
+		dev_err(dev,
+			"profiling buffer owned by higher exception level\n");
+		return;
+	}
+
+	/* Minimum alignment. If it's out-of-range, then fail the probe */
+	fld = reg >> SYS_PMBIDR_EL1_ALIGN_SHIFT & SYS_PMBIDR_EL1_ALIGN_MASK;
+	spe_pmu->align = 1 << fld;
+	if (spe_pmu->align > SZ_2K) {
+		dev_err(dev, "unsupported PMBIDR.Align [%d] on CPU %d\n",
+			fld, smp_processor_id());
+		return;
+	}
+
+	/* It's now safe to read PMSIDR and figure out what we've got */
+	reg = read_sysreg_s(SYS_PMSIDR_EL1);
+	if (reg & BIT(SYS_PMSIDR_EL1_FE_SHIFT))
+		spe_pmu->features |= SPE_PMU_FEAT_FILT_EVT;
+
+	if (reg & BIT(SYS_PMSIDR_EL1_FT_SHIFT))
+		spe_pmu->features |= SPE_PMU_FEAT_FILT_TYP;
+
+	if (reg & BIT(SYS_PMSIDR_EL1_FL_SHIFT))
+		spe_pmu->features |= SPE_PMU_FEAT_FILT_LAT;
+
+	if (reg & BIT(SYS_PMSIDR_EL1_ARCHINST_SHIFT))
+		spe_pmu->features |= SPE_PMU_FEAT_ARCH_INST;
+
+	if (reg & BIT(SYS_PMSIDR_EL1_LDS_SHIFT))
+		spe_pmu->features |= SPE_PMU_FEAT_LDS;
+
+	if (reg & BIT(SYS_PMSIDR_EL1_ERND_SHIFT))
+		spe_pmu->features |= SPE_PMU_FEAT_ERND;
+
+	/* This field has a spaced out encoding, so just use a look-up */
+	fld = reg >> SYS_PMSIDR_EL1_INTERVAL_SHIFT & SYS_PMSIDR_EL1_INTERVAL_MASK;
+	switch (fld) {
+	case 0:
+		spe_pmu->min_period = 256;
+		break;
+	case 2:
+		spe_pmu->min_period = 512;
+		break;
+	case 3:
+		spe_pmu->min_period = 768;
+		break;
+	case 4:
+		spe_pmu->min_period = 1024;
+		break;
+	case 5:
+		spe_pmu->min_period = 1536;
+		break;
+	case 6:
+		spe_pmu->min_period = 2048;
+		break;
+	case 7:
+		spe_pmu->min_period = 3072;
+		break;
+	default:
+		dev_warn(dev, "unknown PMSIDR_EL1.Interval [%d]; assuming 8\n",
+			 fld);
+		fallthrough;
+	case 8:
+		spe_pmu->min_period = 4096;
+	}
+
+	/* Maximum record size. If it's out-of-range, then fail the probe */
+	fld = reg >> SYS_PMSIDR_EL1_MAXSIZE_SHIFT & SYS_PMSIDR_EL1_MAXSIZE_MASK;
+	spe_pmu->max_record_sz = 1 << fld;
+	if (spe_pmu->max_record_sz > SZ_2K || spe_pmu->max_record_sz < 16) {
+		dev_err(dev, "unsupported PMSIDR_EL1.MaxSize [%d] on CPU %d\n",
+			fld, smp_processor_id());
+		return;
+	}
+
+	fld = reg >> SYS_PMSIDR_EL1_COUNTSIZE_SHIFT & SYS_PMSIDR_EL1_COUNTSIZE_MASK;
+	switch (fld) {
+	default:
+		dev_warn(dev, "unknown PMSIDR_EL1.CountSize [%d]; assuming 2\n",
+			 fld);
+		fallthrough;
+	case 2:
+		spe_pmu->counter_sz = 12;
+	}
+
+	dev_info(dev,
+		 "probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
+		 cpumask_pr_args(&spe_pmu->supported_cpus),
+		 spe_pmu->max_record_sz, spe_pmu->align, spe_pmu->features);
+
+	spe_pmu->features |= SPE_PMU_FEAT_DEV_PROBED;
+	return;
+}
+
+static void __arm_spe_pmu_reset_local(void)
+{
+	/*
+	 * This is probably overkill, as we have no idea where we're
+	 * draining any buffered data to...
+	 */
+	arm_spe_pmu_disable_and_drain_local();
+
+	/* Reset the buffer base pointer */
+	write_sysreg_s(0, SYS_PMBPTR_EL1);
+	isb();
+
+	/* Clear any pending management interrupts */
+	write_sysreg_s(0, SYS_PMBSR_EL1);
+	isb();
+}
+
+static void __arm_spe_pmu_setup_one(void *info)
+{
+	struct arm_spe_pmu *spe_pmu = info;
+
+	__arm_spe_pmu_reset_local();
+	enable_percpu_irq(spe_pmu->irq, IRQ_TYPE_NONE);
+}
+
+static void __arm_spe_pmu_stop_one(void *info)
+{
+	struct arm_spe_pmu *spe_pmu = info;
+
+	disable_percpu_irq(spe_pmu->irq);
+	__arm_spe_pmu_reset_local();
+}
+
+static int arm_spe_pmu_cpu_startup(unsigned int cpu, struct hlist_node *node)
+{
+	struct arm_spe_pmu *spe_pmu;
+
+	spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
+	if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+		return 0;
+
+	__arm_spe_pmu_setup_one(spe_pmu);
+	return 0;
+}
+
+static int arm_spe_pmu_cpu_teardown(unsigned int cpu, struct hlist_node *node)
+{
+	struct arm_spe_pmu *spe_pmu;
+
+	spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
+	if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+		return 0;
+
+	__arm_spe_pmu_stop_one(spe_pmu);
+	return 0;
+}
+
+static int arm_spe_pmu_dev_init(struct arm_spe_pmu *spe_pmu)
+{
+	int ret;
+	cpumask_t *mask = &spe_pmu->supported_cpus;
+
+	/* Make sure we probe the hardware on a relevant CPU */
+	ret = smp_call_function_any(mask,  __arm_spe_pmu_dev_probe, spe_pmu, 1);
+	if (ret || !(spe_pmu->features & SPE_PMU_FEAT_DEV_PROBED))
+		return -ENXIO;
+
+	/* Request our PPIs (note that the IRQ is still disabled) */
+	ret = request_percpu_irq(spe_pmu->irq, arm_spe_pmu_irq_handler, DRVNAME,
+				 spe_pmu->handle);
+	if (ret)
+		return ret;
+
+	/*
+	 * Register our hotplug notifier now so we don't miss any events.
+	 * This will enable the IRQ for any supported CPUs that are already
+	 * up.
+	 */
+	ret = cpuhp_state_add_instance(arm_spe_pmu_online,
+				       &spe_pmu->hotplug_node);
+	if (ret)
+		free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
+
+	return ret;
+}
+
+static void arm_spe_pmu_dev_teardown(struct arm_spe_pmu *spe_pmu)
+{
+	cpuhp_state_remove_instance(arm_spe_pmu_online, &spe_pmu->hotplug_node);
+	free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
+}
+
+/* Driver and device probing */
+static int arm_spe_pmu_irq_probe(struct arm_spe_pmu *spe_pmu)
+{
+	struct platform_device *pdev = spe_pmu->pdev;
+	int irq = platform_get_irq(pdev, 0);
+
+	if (irq < 0)
+		return -ENXIO;
+
+	if (!irq_is_percpu(irq)) {
+		dev_err(&pdev->dev, "expected PPI but got SPI (%d)\n", irq);
+		return -EINVAL;
+	}
+
+	if (irq_get_percpu_devid_partition(irq, &spe_pmu->supported_cpus)) {
+		dev_err(&pdev->dev, "failed to get PPI partition (%d)\n", irq);
+		return -EINVAL;
+	}
+
+	spe_pmu->irq = irq;
+	return 0;
+}
+
+static const struct of_device_id arm_spe_pmu_of_match[] = {
+	{ .compatible = "arm,statistical-profiling-extension-v1", .data = (void *)1 },
+	{ /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, arm_spe_pmu_of_match);
+
+static const struct platform_device_id arm_spe_match[] = {
+	{ ARMV8_SPE_PDEV_NAME, 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, arm_spe_match);
+
+static int arm_spe_pmu_device_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct arm_spe_pmu *spe_pmu;
+	struct device *dev = &pdev->dev;
+
+	/*
+	 * If kernelspace is unmapped when running at EL0, then the SPE
+	 * buffer will fault and prematurely terminate the AUX session.
+	 */
+	if (arm64_kernel_unmapped_at_el0()) {
+		dev_warn_once(dev, "profiling buffer inaccessible. Try passing \"kpti=off\" on the kernel command line\n");
+		return -EPERM;
+	}
+
+	spe_pmu = devm_kzalloc(dev, sizeof(*spe_pmu), GFP_KERNEL);
+	if (!spe_pmu) {
+		dev_err(dev, "failed to allocate spe_pmu\n");
+		return -ENOMEM;
+	}
+
+	spe_pmu->handle = alloc_percpu(typeof(*spe_pmu->handle));
+	if (!spe_pmu->handle)
+		return -ENOMEM;
+
+	spe_pmu->pdev = pdev;
+	platform_set_drvdata(pdev, spe_pmu);
+
+	ret = arm_spe_pmu_irq_probe(spe_pmu);
+	if (ret)
+		goto out_free_handle;
+
+	ret = arm_spe_pmu_dev_init(spe_pmu);
+	if (ret)
+		goto out_free_handle;
+
+	ret = arm_spe_pmu_perf_init(spe_pmu);
+	if (ret)
+		goto out_teardown_dev;
+
+	return 0;
+
+out_teardown_dev:
+	arm_spe_pmu_dev_teardown(spe_pmu);
+out_free_handle:
+	free_percpu(spe_pmu->handle);
+	return ret;
+}
+
+static int arm_spe_pmu_device_remove(struct platform_device *pdev)
+{
+	struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
+
+	arm_spe_pmu_perf_destroy(spe_pmu);
+	arm_spe_pmu_dev_teardown(spe_pmu);
+	free_percpu(spe_pmu->handle);
+	return 0;
+}
+
+static struct platform_driver arm_spe_pmu_driver = {
+	.id_table = arm_spe_match,
+	.driver	= {
+		.name		= DRVNAME,
+		.of_match_table	= of_match_ptr(arm_spe_pmu_of_match),
+		.suppress_bind_attrs = true,
+	},
+	.probe	= arm_spe_pmu_device_probe,
+	.remove	= arm_spe_pmu_device_remove,
+};
+
+static int __init arm_spe_pmu_init(void)
+{
+	int ret;
+
+	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME,
+				      arm_spe_pmu_cpu_startup,
+				      arm_spe_pmu_cpu_teardown);
+	if (ret < 0)
+		return ret;
+	arm_spe_pmu_online = ret;
+
+	ret = platform_driver_register(&arm_spe_pmu_driver);
+	if (ret)
+		cpuhp_remove_multi_state(arm_spe_pmu_online);
+
+	return ret;
+}
+
+static void __exit arm_spe_pmu_exit(void)
+{
+	platform_driver_unregister(&arm_spe_pmu_driver);
+	cpuhp_remove_multi_state(arm_spe_pmu_online);
+}
+
+module_init(arm_spe_pmu_init);
+module_exit(arm_spe_pmu_exit);
+
+MODULE_DESCRIPTION("Perf driver for the ARMv8.2 Statistical Profiling Extension");
+MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
+MODULE_LICENSE("GPL v2");