Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 270 insertions, 0 deletions

diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c
new file mode 100644
index 000000000..0fe408964
--- /dev/null
+++ b/drivers/phy/marvell/phy-armada38x-comphy.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Russell King, Deep Blue Solutions Ltd.
+ *
+ * Partly derived from CP110 comphy driver by Antoine Tenart
+ * <antoine.tenart@bootlin.com>
+ */
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#define MAX_A38X_COMPHY	6
+#define MAX_A38X_PORTS	3
+
+#define COMPHY_CFG1		0x00
+#define  COMPHY_CFG1_GEN_TX(x)		((x) << 26)
+#define  COMPHY_CFG1_GEN_TX_MSK		COMPHY_CFG1_GEN_TX(15)
+#define  COMPHY_CFG1_GEN_RX(x)		((x) << 22)
+#define  COMPHY_CFG1_GEN_RX_MSK		COMPHY_CFG1_GEN_RX(15)
+#define  GEN_SGMII_1_25GBPS		6
+#define  GEN_SGMII_3_125GBPS		8
+
+#define COMPHY_STAT1		0x18
+#define  COMPHY_STAT1_PLL_RDY_TX	BIT(3)
+#define  COMPHY_STAT1_PLL_RDY_RX	BIT(2)
+
+#define COMPHY_SELECTOR		0xfc
+
+struct a38x_comphy;
+
+struct a38x_comphy_lane {
+	void __iomem *base;
+	struct a38x_comphy *priv;
+	unsigned int n;
+
+	int port;
+};
+
+struct a38x_comphy {
+	void __iomem *base;
+	void __iomem *conf;
+	struct device *dev;
+	struct a38x_comphy_lane lane[MAX_A38X_COMPHY];
+};
+
+static const u8 gbe_mux[MAX_A38X_COMPHY][MAX_A38X_PORTS] = {
+	{ 0, 0, 0 },
+	{ 4, 5, 0 },
+	{ 0, 4, 0 },
+	{ 0, 0, 4 },
+	{ 0, 3, 0 },
+	{ 0, 0, 3 },
+};
+
+static void a38x_set_conf(struct a38x_comphy_lane *lane, bool enable)
+{
+	struct a38x_comphy *priv = lane->priv;
+	u32 conf;
+
+	if (priv->conf) {
+		conf = readl_relaxed(priv->conf);
+		if (enable)
+			conf |= BIT(lane->port);
+		else
+			conf &= ~BIT(lane->port);
+		writel(conf, priv->conf);
+	}
+}
+
+static void a38x_comphy_set_reg(struct a38x_comphy_lane *lane,
+				unsigned int offset, u32 mask, u32 value)
+{
+	u32 val;
+
+	val = readl_relaxed(lane->base + offset) & ~mask;
+	writel(val | value, lane->base + offset);
+}
+
+static void a38x_comphy_set_speed(struct a38x_comphy_lane *lane,
+				  unsigned int gen_tx, unsigned int gen_rx)
+{
+	a38x_comphy_set_reg(lane, COMPHY_CFG1,
+			    COMPHY_CFG1_GEN_TX_MSK | COMPHY_CFG1_GEN_RX_MSK,
+			    COMPHY_CFG1_GEN_TX(gen_tx) |
+		            COMPHY_CFG1_GEN_RX(gen_rx));
+}
+
+static int a38x_comphy_poll(struct a38x_comphy_lane *lane,
+			    unsigned int offset, u32 mask, u32 value)
+{
+	u32 val;
+	int ret;
+
+	ret = readl_relaxed_poll_timeout_atomic(lane->base + offset, val,
+						(val & mask) == value,
+						1000, 150000);
+
+	if (ret)
+		dev_err(lane->priv->dev,
+			"comphy%u: timed out waiting for status\n", lane->n);
+
+	return ret;
+}
+
+/*
+ * We only support changing the speed for comphys configured for GBE.
+ * Since that is all we do, we only poll for PLL ready status.
+ */
+static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
+{
+	struct a38x_comphy_lane *lane = phy_get_drvdata(phy);
+	unsigned int gen;
+	int ret;
+
+	if (mode != PHY_MODE_ETHERNET)
+		return -EINVAL;
+
+	switch (sub) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+		gen = GEN_SGMII_1_25GBPS;
+		break;
+
+	case PHY_INTERFACE_MODE_2500BASEX:
+		gen = GEN_SGMII_3_125GBPS;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	a38x_set_conf(lane, false);
+
+	a38x_comphy_set_speed(lane, gen, gen);
+
+	ret = a38x_comphy_poll(lane, COMPHY_STAT1,
+			       COMPHY_STAT1_PLL_RDY_TX |
+			       COMPHY_STAT1_PLL_RDY_RX,
+			       COMPHY_STAT1_PLL_RDY_TX |
+			       COMPHY_STAT1_PLL_RDY_RX);
+
+	if (ret == 0)
+		a38x_set_conf(lane, true);
+
+	return ret;
+}
+
+static const struct phy_ops a38x_comphy_ops = {
+	.set_mode	= a38x_comphy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *a38x_comphy_xlate(struct device *dev,
+				     struct of_phandle_args *args)
+{
+	struct a38x_comphy_lane *lane;
+	struct phy *phy;
+	u32 val;
+
+	if (WARN_ON(args->args[0] >= MAX_A38X_PORTS))
+		return ERR_PTR(-EINVAL);
+
+	phy = of_phy_simple_xlate(dev, args);
+	if (IS_ERR(phy))
+		return phy;
+
+	lane = phy_get_drvdata(phy);
+	if (lane->port >= 0)
+		return ERR_PTR(-EBUSY);
+
+	lane->port = args->args[0];
+
+	val = readl_relaxed(lane->priv->base + COMPHY_SELECTOR);
+	val = (val >> (4 * lane->n)) & 0xf;
+
+	if (!gbe_mux[lane->n][lane->port] ||
+	    val != gbe_mux[lane->n][lane->port]) {
+		dev_warn(lane->priv->dev,
+			 "comphy%u: not configured for GBE\n", lane->n);
+		phy = ERR_PTR(-EINVAL);
+	}
+
+	return phy;
+}
+
+static int a38x_comphy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *provider;
+	struct device_node *child;
+	struct a38x_comphy *priv;
+	struct resource *res;
+	void __iomem *base;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->dev = &pdev->dev;
+	priv->base = base;
+
+	/* Optional */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "conf");
+	if (res) {
+		priv->conf = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(priv->conf))
+			return PTR_ERR(priv->conf);
+	}
+
+	for_each_available_child_of_node(pdev->dev.of_node, child) {
+		struct phy *phy;
+		int ret;
+		u32 val;
+
+		ret = of_property_read_u32(child, "reg", &val);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
+				ret);
+			continue;
+		}
+
+		if (val >= MAX_A38X_COMPHY || priv->lane[val].base) {
+			dev_err(&pdev->dev, "invalid 'reg' property\n");
+			continue;
+		}
+
+		phy = devm_phy_create(&pdev->dev, child, &a38x_comphy_ops);
+		if (IS_ERR(phy)) {
+			of_node_put(child);
+			return PTR_ERR(phy);
+		}
+
+		priv->lane[val].base = base + 0x28 * val;
+		priv->lane[val].priv = priv;
+		priv->lane[val].n = val;
+		priv->lane[val].port = -1;
+		phy_set_drvdata(phy, &priv->lane[val]);
+	}
+
+	dev_set_drvdata(&pdev->dev, priv);
+
+	provider = devm_of_phy_provider_register(&pdev->dev, a38x_comphy_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id a38x_comphy_of_match_table[] = {
+	{ .compatible = "marvell,armada-380-comphy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, a38x_comphy_of_match_table);
+
+static struct platform_driver a38x_comphy_driver = {
+	.probe	= a38x_comphy_probe,
+	.driver	= {
+		.name = "armada-38x-comphy",
+		.of_match_table = a38x_comphy_of_match_table,
+	},
+};
+module_platform_driver(a38x_comphy_driver);
+
+MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
+MODULE_DESCRIPTION("Common PHY driver for Armada 38x SoCs");
+MODULE_LICENSE("GPL v2");