Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 1593 insertions, 0 deletions

diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
new file mode 100644
index 000000000..111bdcae7
--- /dev/null
+++ b/drivers/phy/renesas/Kconfig
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Renesas platforms
+#
+config PHY_RCAR_GEN2
+	tristate "Renesas R-Car generation 2 USB PHY driver"
+	depends on ARCH_RENESAS
+	depends on GENERIC_PHY
+	help
+	  Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+
+config PHY_RCAR_GEN3_PCIE
+	tristate "Renesas R-Car generation 3 PCIe PHY driver"
+	depends on ARCH_RENESAS
+	select GENERIC_PHY
+	help
+	  Support for the PCIe PHY found on Renesas R-Car generation 3 SoCs.
+
+config PHY_RCAR_GEN3_USB2
+	tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
+	depends on ARCH_RENESAS
+	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_COMMON
+	help
+	  Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
+
+config PHY_RCAR_GEN3_USB3
+	tristate "Renesas R-Car generation 3 USB 3.0 PHY driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Support for USB 3.0 PHY found on Renesas R-Car generation 3 SoCs.
diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile
new file mode 100644
index 000000000..b599ff8a4
--- /dev/null
+++ b/drivers/phy/renesas/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_PCIE)	+= phy-rcar-gen3-pcie.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB2)	+= phy-rcar-gen3-usb2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB3)	+= phy-rcar-gen3-usb3.o
diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
new file mode 100644
index 000000000..2e279ac0f
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen2 PHY driver
+ *
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <linux/of_device.h>
+
+#define USBHS_LPSTS			0x02
+#define USBHS_UGCTRL			0x80
+#define USBHS_UGCTRL2			0x84
+#define USBHS_UGSTS			0x88	/* From technical update */
+
+/* Low Power Status register (LPSTS) */
+#define USBHS_LPSTS_SUSPM		0x4000
+
+/* USB General control register (UGCTRL) */
+#define USBHS_UGCTRL_CONNECT		0x00000004
+#define USBHS_UGCTRL_PLLRESET		0x00000001
+
+/* USB General control register 2 (UGCTRL2) */
+#define USBHS_UGCTRL2_USB2SEL		0x80000000
+#define USBHS_UGCTRL2_USB2SEL_PCI	0x00000000
+#define USBHS_UGCTRL2_USB2SEL_USB30	0x80000000
+#define USBHS_UGCTRL2_USB0SEL		0x00000030
+#define USBHS_UGCTRL2_USB0SEL_PCI	0x00000010
+#define USBHS_UGCTRL2_USB0SEL_HS_USB	0x00000030
+#define USBHS_UGCTRL2_USB0SEL_USB20	0x00000010
+#define USBHS_UGCTRL2_USB0SEL_HS_USB20	0x00000020
+
+/* USB General status register (UGSTS) */
+#define USBHS_UGSTS_LOCK		0x00000100 /* From technical update */
+
+#define PHYS_PER_CHANNEL	2
+
+struct rcar_gen2_phy {
+	struct phy *phy;
+	struct rcar_gen2_channel *channel;
+	int number;
+	u32 select_value;
+};
+
+struct rcar_gen2_channel {
+	struct device_node *of_node;
+	struct rcar_gen2_phy_driver *drv;
+	struct rcar_gen2_phy phys[PHYS_PER_CHANNEL];
+	int selected_phy;
+	u32 select_mask;
+};
+
+struct rcar_gen2_phy_driver {
+	void __iomem *base;
+	struct clk *clk;
+	spinlock_t lock;
+	int num_channels;
+	struct rcar_gen2_channel *channels;
+};
+
+struct rcar_gen2_phy_data {
+	const struct phy_ops *gen2_phy_ops;
+	const u32 (*select_value)[PHYS_PER_CHANNEL];
+	const u32 num_channels;
+};
+
+static int rcar_gen2_phy_init(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_channel *channel = phy->channel;
+	struct rcar_gen2_phy_driver *drv = channel->drv;
+	unsigned long flags;
+	u32 ugctrl2;
+
+	/*
+	 * Try to acquire exclusive access to PHY.  The first driver calling
+	 * phy_init()  on a given channel wins, and all attempts  to use another
+	 * PHY on this channel will fail until phy_exit() is called by the first
+	 * driver.   Achieving this with cmpxcgh() should be SMP-safe.
+	 */
+	if (cmpxchg(&channel->selected_phy, -1, phy->number) != -1)
+		return -EBUSY;
+
+	clk_prepare_enable(drv->clk);
+
+	spin_lock_irqsave(&drv->lock, flags);
+	ugctrl2 = readl(drv->base + USBHS_UGCTRL2);
+	ugctrl2 &= ~channel->select_mask;
+	ugctrl2 |= phy->select_value;
+	writel(ugctrl2, drv->base + USBHS_UGCTRL2);
+	spin_unlock_irqrestore(&drv->lock, flags);
+	return 0;
+}
+
+static int rcar_gen2_phy_exit(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_channel *channel = phy->channel;
+
+	clk_disable_unprepare(channel->drv->clk);
+
+	channel->selected_phy = -1;
+
+	return 0;
+}
+
+static int rcar_gen2_phy_power_on(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+	void __iomem *base = drv->base;
+	unsigned long flags;
+	u32 value;
+	int err = 0, i;
+
+	/* Skip if it's not USBHS */
+	if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB)
+		return 0;
+
+	spin_lock_irqsave(&drv->lock, flags);
+
+	/* Power on USBHS PHY */
+	value = readl(base + USBHS_UGCTRL);
+	value &= ~USBHS_UGCTRL_PLLRESET;
+	writel(value, base + USBHS_UGCTRL);
+
+	value = readw(base + USBHS_LPSTS);
+	value |= USBHS_LPSTS_SUSPM;
+	writew(value, base + USBHS_LPSTS);
+
+	for (i = 0; i < 20; i++) {
+		value = readl(base + USBHS_UGSTS);
+		if ((value & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
+			value = readl(base + USBHS_UGCTRL);
+			value |= USBHS_UGCTRL_CONNECT;
+			writel(value, base + USBHS_UGCTRL);
+			goto out;
+		}
+		udelay(1);
+	}
+
+	/* Timed out waiting for the PLL lock */
+	err = -ETIMEDOUT;
+
+out:
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	return err;
+}
+
+static int rcar_gen2_phy_power_off(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+	void __iomem *base = drv->base;
+	unsigned long flags;
+	u32 value;
+
+	/* Skip if it's not USBHS */
+	if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB)
+		return 0;
+
+	spin_lock_irqsave(&drv->lock, flags);
+
+	/* Power off USBHS PHY */
+	value = readl(base + USBHS_UGCTRL);
+	value &= ~USBHS_UGCTRL_CONNECT;
+	writel(value, base + USBHS_UGCTRL);
+
+	value = readw(base + USBHS_LPSTS);
+	value &= ~USBHS_LPSTS_SUSPM;
+	writew(value, base + USBHS_LPSTS);
+
+	value = readl(base + USBHS_UGCTRL);
+	value |= USBHS_UGCTRL_PLLRESET;
+	writel(value, base + USBHS_UGCTRL);
+
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	return 0;
+}
+
+static int rz_g1c_phy_power_on(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+	void __iomem *base = drv->base;
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&drv->lock, flags);
+
+	/* Power on USBHS PHY */
+	value = readl(base + USBHS_UGCTRL);
+	value &= ~USBHS_UGCTRL_PLLRESET;
+	writel(value, base + USBHS_UGCTRL);
+
+	/* As per the data sheet wait 340 micro sec for power stable */
+	udelay(340);
+
+	if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
+		value = readw(base + USBHS_LPSTS);
+		value |= USBHS_LPSTS_SUSPM;
+		writew(value, base + USBHS_LPSTS);
+	}
+
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	return 0;
+}
+
+static int rz_g1c_phy_power_off(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+	void __iomem *base = drv->base;
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&drv->lock, flags);
+	/* Power off USBHS PHY */
+	if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
+		value = readw(base + USBHS_LPSTS);
+		value &= ~USBHS_LPSTS_SUSPM;
+		writew(value, base + USBHS_LPSTS);
+	}
+
+	value = readl(base + USBHS_UGCTRL);
+	value |= USBHS_UGCTRL_PLLRESET;
+	writel(value, base + USBHS_UGCTRL);
+
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	return 0;
+}
+
+static const struct phy_ops rcar_gen2_phy_ops = {
+	.init		= rcar_gen2_phy_init,
+	.exit		= rcar_gen2_phy_exit,
+	.power_on	= rcar_gen2_phy_power_on,
+	.power_off	= rcar_gen2_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct phy_ops rz_g1c_phy_ops = {
+	.init		= rcar_gen2_phy_init,
+	.exit		= rcar_gen2_phy_exit,
+	.power_on	= rz_g1c_phy_power_on,
+	.power_off	= rz_g1c_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const u32 pci_select_value[][PHYS_PER_CHANNEL] = {
+	[0]	= { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB },
+	[2]	= { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 },
+};
+
+static const u32 usb20_select_value[][PHYS_PER_CHANNEL] = {
+	{ USBHS_UGCTRL2_USB0SEL_USB20, USBHS_UGCTRL2_USB0SEL_HS_USB20 },
+};
+
+static const struct rcar_gen2_phy_data rcar_gen2_usb_phy_data = {
+	.gen2_phy_ops = &rcar_gen2_phy_ops,
+	.select_value = pci_select_value,
+	.num_channels = ARRAY_SIZE(pci_select_value),
+};
+
+static const struct rcar_gen2_phy_data rz_g1c_usb_phy_data = {
+	.gen2_phy_ops = &rz_g1c_phy_ops,
+	.select_value = usb20_select_value,
+	.num_channels = ARRAY_SIZE(usb20_select_value),
+};
+
+static const struct of_device_id rcar_gen2_phy_match_table[] = {
+	{
+		.compatible = "renesas,usb-phy-r8a77470",
+		.data = &rz_g1c_usb_phy_data,
+	},
+	{
+		.compatible = "renesas,usb-phy-r8a7790",
+		.data = &rcar_gen2_usb_phy_data,
+	},
+	{
+		.compatible = "renesas,usb-phy-r8a7791",
+		.data = &rcar_gen2_usb_phy_data,
+	},
+	{
+		.compatible = "renesas,usb-phy-r8a7794",
+		.data = &rcar_gen2_usb_phy_data,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-usb-phy",
+		.data = &rcar_gen2_usb_phy_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
+
+static struct phy *rcar_gen2_phy_xlate(struct device *dev,
+				       struct of_phandle_args *args)
+{
+	struct rcar_gen2_phy_driver *drv;
+	struct device_node *np = args->np;
+	int i;
+
+	drv = dev_get_drvdata(dev);
+	if (!drv)
+		return ERR_PTR(-EINVAL);
+
+	for (i = 0; i < drv->num_channels; i++) {
+		if (np == drv->channels[i].of_node)
+			break;
+	}
+
+	if (i >= drv->num_channels || args->args[0] >= 2)
+		return ERR_PTR(-ENODEV);
+
+	return drv->channels[i].phys[args->args[0]].phy;
+}
+
+static const u32 select_mask[] = {
+	[0]	= USBHS_UGCTRL2_USB0SEL,
+	[2]	= USBHS_UGCTRL2_USB2SEL,
+};
+
+static int rcar_gen2_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rcar_gen2_phy_driver *drv;
+	struct phy_provider *provider;
+	struct device_node *np;
+	struct resource *res;
+	void __iomem *base;
+	struct clk *clk;
+	const struct rcar_gen2_phy_data *data;
+	int i = 0;
+
+	if (!dev->of_node) {
+		dev_err(dev,
+			"This driver is required to be instantiated from device tree\n");
+		return -EINVAL;
+	}
+
+	clk = devm_clk_get(dev, "usbhs");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Can't get USBHS clock\n");
+		return PTR_ERR(clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	spin_lock_init(&drv->lock);
+
+	drv->clk = clk;
+	drv->base = base;
+
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	drv->num_channels = of_get_child_count(dev->of_node);
+	drv->channels = devm_kcalloc(dev, drv->num_channels,
+				     sizeof(struct rcar_gen2_channel),
+				     GFP_KERNEL);
+	if (!drv->channels)
+		return -ENOMEM;
+
+	for_each_child_of_node(dev->of_node, np) {
+		struct rcar_gen2_channel *channel = drv->channels + i;
+		u32 channel_num;
+		int error, n;
+
+		channel->of_node = np;
+		channel->drv = drv;
+		channel->selected_phy = -1;
+
+		error = of_property_read_u32(np, "reg", &channel_num);
+		if (error || channel_num >= data->num_channels) {
+			dev_err(dev, "Invalid \"reg\" property\n");
+			of_node_put(np);
+			return error;
+		}
+		channel->select_mask = select_mask[channel_num];
+
+		for (n = 0; n < PHYS_PER_CHANNEL; n++) {
+			struct rcar_gen2_phy *phy = &channel->phys[n];
+
+			phy->channel = channel;
+			phy->number = n;
+			phy->select_value = data->select_value[channel_num][n];
+
+			phy->phy = devm_phy_create(dev, NULL,
+						   data->gen2_phy_ops);
+			if (IS_ERR(phy->phy)) {
+				dev_err(dev, "Failed to create PHY\n");
+				of_node_put(np);
+				return PTR_ERR(phy->phy);
+			}
+			phy_set_drvdata(phy->phy, phy);
+		}
+
+		i++;
+	}
+
+	provider = devm_of_phy_provider_register(dev, rcar_gen2_phy_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "Failed to register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_set_drvdata(dev, drv);
+
+	return 0;
+}
+
+static struct platform_driver rcar_gen2_phy_driver = {
+	.driver = {
+		.name		= "phy_rcar_gen2",
+		.of_match_table	= rcar_gen2_phy_match_table,
+	},
+	.probe	= rcar_gen2_phy_probe,
+};
+
+module_platform_driver(rcar_gen2_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen2 PHY");
+MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>");
diff --git a/drivers/phy/renesas/phy-rcar-gen3-pcie.c b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
new file mode 100644
index 000000000..c4e4aa216
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen3 PCIe PHY driver
+ *
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define PHY_CTRL		0x4000		/* R8A77980 only */
+
+/* PHY control register (PHY_CTRL) */
+#define PHY_CTRL_PHY_PWDN	BIT(2)
+
+struct rcar_gen3_phy {
+	struct phy *phy;
+	spinlock_t lock;
+	void __iomem *base;
+};
+
+static void rcar_gen3_phy_pcie_modify_reg(struct phy *p, unsigned int reg,
+					  u32 clear, u32 set)
+{
+	struct rcar_gen3_phy *phy = phy_get_drvdata(p);
+	void __iomem *base = phy->base;
+	unsigned long flags;
+	u32 value;
+
+	spin_lock_irqsave(&phy->lock, flags);
+
+	value = readl(base + reg);
+	value &= ~clear;
+	value |= set;
+	writel(value, base + reg);
+
+	spin_unlock_irqrestore(&phy->lock, flags);
+}
+
+static int r8a77980_phy_pcie_power_on(struct phy *p)
+{
+	/* Power on the PCIe PHY */
+	rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, PHY_CTRL_PHY_PWDN, 0);
+
+	return 0;
+}
+
+static int r8a77980_phy_pcie_power_off(struct phy *p)
+{
+	/* Power off the PCIe PHY */
+	rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, 0, PHY_CTRL_PHY_PWDN);
+
+	return 0;
+}
+
+static const struct phy_ops r8a77980_phy_pcie_ops = {
+	.power_on	= r8a77980_phy_pcie_power_on,
+	.power_off	= r8a77980_phy_pcie_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen3_phy_pcie_match_table[] = {
+	{ .compatible = "renesas,r8a77980-pcie-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_pcie_match_table);
+
+static int rcar_gen3_phy_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	struct rcar_gen3_phy *phy;
+	struct resource *res;
+	void __iomem *base;
+	int error;
+
+	if (!dev->of_node) {
+		dev_err(dev,
+			"This driver must only be instantiated from the device tree\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	spin_lock_init(&phy->lock);
+
+	phy->base = base;
+
+	/*
+	 * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+	 * And then, phy-core will manage runtime PM for this device.
+	 */
+	pm_runtime_enable(dev);
+
+	phy->phy = devm_phy_create(dev, NULL, &r8a77980_phy_pcie_ops);
+	if (IS_ERR(phy->phy)) {
+		dev_err(dev, "Failed to create PCIe PHY\n");
+		error = PTR_ERR(phy->phy);
+		goto error;
+	}
+	phy_set_drvdata(phy->phy, phy);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "Failed to register PHY provider\n");
+		error = PTR_ERR(provider);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	pm_runtime_disable(dev);
+
+	return error;
+}
+
+static int rcar_gen3_phy_pcie_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_driver = {
+	.driver = {
+		.name		= "phy_rcar_gen3_pcie",
+		.of_match_table	= rcar_gen3_phy_pcie_match_table,
+	},
+	.probe	= rcar_gen3_phy_pcie_probe,
+	.remove = rcar_gen3_phy_pcie_remove,
+};
+
+module_platform_driver(rcar_gen3_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 PCIe PHY");
+MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>");
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
new file mode 100644
index 000000000..2cb949f93
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -0,0 +1,735 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen3 for USB2.0 PHY driver
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corporation
+ *
+ * This is based on the phy-rcar-gen2 driver:
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ */
+
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/string.h>
+#include <linux/usb/of.h>
+#include <linux/workqueue.h>
+
+/******* USB2.0 Host registers (original offset is +0x200) *******/
+#define USB2_INT_ENABLE		0x000
+#define USB2_USBCTR		0x00c
+#define USB2_SPD_RSM_TIMSET	0x10c
+#define USB2_OC_TIMSET		0x110
+#define USB2_COMMCTRL		0x600
+#define USB2_OBINTSTA		0x604
+#define USB2_OBINTEN		0x608
+#define USB2_VBCTRL		0x60c
+#define USB2_LINECTRL1		0x610
+#define USB2_ADPCTRL		0x630
+
+/* INT_ENABLE */
+#define USB2_INT_ENABLE_UCOM_INTEN	BIT(3)
+#define USB2_INT_ENABLE_USBH_INTB_EN	BIT(2)	/* For EHCI */
+#define USB2_INT_ENABLE_USBH_INTA_EN	BIT(1)	/* For OHCI */
+
+/* USBCTR */
+#define USB2_USBCTR_DIRPD	BIT(2)
+#define USB2_USBCTR_PLL_RST	BIT(1)
+
+/* SPD_RSM_TIMSET */
+#define USB2_SPD_RSM_TIMSET_INIT	0x014e029b
+
+/* OC_TIMSET */
+#define USB2_OC_TIMSET_INIT		0x000209ab
+
+/* COMMCTRL */
+#define USB2_COMMCTRL_OTG_PERI		BIT(31)	/* 1 = Peripheral mode */
+
+/* OBINTSTA and OBINTEN */
+#define USB2_OBINT_SESSVLDCHG		BIT(12)
+#define USB2_OBINT_IDDIGCHG		BIT(11)
+#define USB2_OBINT_BITS			(USB2_OBINT_SESSVLDCHG | \
+					 USB2_OBINT_IDDIGCHG)
+
+/* VBCTRL */
+#define USB2_VBCTRL_OCCLREN		BIT(16)
+#define USB2_VBCTRL_DRVVBUSSEL		BIT(8)
+
+/* LINECTRL1 */
+#define USB2_LINECTRL1_DPRPD_EN		BIT(19)
+#define USB2_LINECTRL1_DP_RPD		BIT(18)
+#define USB2_LINECTRL1_DMRPD_EN		BIT(17)
+#define USB2_LINECTRL1_DM_RPD		BIT(16)
+#define USB2_LINECTRL1_OPMODE_NODRV	BIT(6)
+
+/* ADPCTRL */
+#define USB2_ADPCTRL_OTGSESSVLD		BIT(20)
+#define USB2_ADPCTRL_IDDIG		BIT(19)
+#define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
+#define USB2_ADPCTRL_DRVVBUS		BIT(4)
+
+#define NUM_OF_PHYS			4
+enum rcar_gen3_phy_index {
+	PHY_INDEX_BOTH_HC,
+	PHY_INDEX_OHCI,
+	PHY_INDEX_EHCI,
+	PHY_INDEX_HSUSB
+};
+
+static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = {
+	USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN,
+	USB2_INT_ENABLE_USBH_INTA_EN,
+	USB2_INT_ENABLE_USBH_INTB_EN,
+	0
+};
+
+struct rcar_gen3_phy {
+	struct phy *phy;
+	struct rcar_gen3_chan *ch;
+	u32 int_enable_bits;
+	bool initialized;
+	bool otg_initialized;
+	bool powered;
+};
+
+struct rcar_gen3_chan {
+	void __iomem *base;
+	struct device *dev;	/* platform_device's device */
+	struct extcon_dev *extcon;
+	struct rcar_gen3_phy rphys[NUM_OF_PHYS];
+	struct regulator *vbus;
+	struct work_struct work;
+	struct mutex lock;	/* protects rphys[...].powered */
+	enum usb_dr_mode dr_mode;
+	int irq;
+	bool extcon_host;
+	bool is_otg_channel;
+	bool uses_otg_pins;
+};
+
+/*
+ * Combination about is_otg_channel and uses_otg_pins:
+ *
+ * Parameters				|| Behaviors
+ * is_otg_channel	| uses_otg_pins	|| irqs		| role sysfs
+ * ---------------------+---------------++--------------+------------
+ * true			| true		|| enabled	| enabled
+ * true                 | false		|| disabled	| enabled
+ * false                | any		|| disabled	| disabled
+ */
+
+static void rcar_gen3_phy_usb2_work(struct work_struct *work)
+{
+	struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan,
+						 work);
+
+	if (ch->extcon_host) {
+		extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(ch->extcon, EXTCON_USB, false);
+	} else {
+		extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(ch->extcon, EXTCON_USB, true);
+	}
+}
+
+static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
+{
+	void __iomem *usb2_base = ch->base;
+	u32 val = readl(usb2_base + USB2_COMMCTRL);
+
+	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host);
+	if (host)
+		val &= ~USB2_COMMCTRL_OTG_PERI;
+	else
+		val |= USB2_COMMCTRL_OTG_PERI;
+	writel(val, usb2_base + USB2_COMMCTRL);
+}
+
+static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
+{
+	void __iomem *usb2_base = ch->base;
+	u32 val = readl(usb2_base + USB2_LINECTRL1);
+
+	dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
+	val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
+	if (dp)
+		val |= USB2_LINECTRL1_DP_RPD;
+	if (dm)
+		val |= USB2_LINECTRL1_DM_RPD;
+	writel(val, usb2_base + USB2_LINECTRL1);
+}
+
+static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
+{
+	void __iomem *usb2_base = ch->base;
+	u32 val = readl(usb2_base + USB2_ADPCTRL);
+
+	dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
+	if (vbus)
+		val |= USB2_ADPCTRL_DRVVBUS;
+	else
+		val &= ~USB2_ADPCTRL_DRVVBUS;
+	writel(val, usb2_base + USB2_ADPCTRL);
+}
+
+static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
+{
+	void __iomem *usb2_base = ch->base;
+	u32 val = readl(usb2_base + USB2_OBINTEN);
+
+	if (ch->uses_otg_pins && enable)
+		val |= USB2_OBINT_BITS;
+	else
+		val &= ~USB2_OBINT_BITS;
+	writel(val, usb2_base + USB2_OBINTEN);
+}
+
+static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
+{
+	rcar_gen3_set_linectrl(ch, 1, 1);
+	rcar_gen3_set_host_mode(ch, 1);
+	rcar_gen3_enable_vbus_ctrl(ch, 1);
+
+	ch->extcon_host = true;
+	schedule_work(&ch->work);
+}
+
+static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
+{
+	rcar_gen3_set_linectrl(ch, 0, 1);
+	rcar_gen3_set_host_mode(ch, 0);
+	rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+	ch->extcon_host = false;
+	schedule_work(&ch->work);
+}
+
+static void rcar_gen3_init_for_b_host(struct rcar_gen3_chan *ch)
+{
+	void __iomem *usb2_base = ch->base;
+	u32 val;
+
+	val = readl(usb2_base + USB2_LINECTRL1);
+	writel(val | USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
+
+	rcar_gen3_set_linectrl(ch, 1, 1);
+	rcar_gen3_set_host_mode(ch, 1);
+	rcar_gen3_enable_vbus_ctrl(ch, 0);
+
+	val = readl(usb2_base + USB2_LINECTRL1);
+	writel(val & ~USB2_LINECTRL1_OPMODE_NODRV, usb2_base + USB2_LINECTRL1);
+}
+
+static void rcar_gen3_init_for_a_peri(struct rcar_gen3_chan *ch)
+{
+	rcar_gen3_set_linectrl(ch, 0, 1);
+	rcar_gen3_set_host_mode(ch, 0);
+	rcar_gen3_enable_vbus_ctrl(ch, 1);
+}
+
+static void rcar_gen3_init_from_a_peri_to_a_host(struct rcar_gen3_chan *ch)
+{
+	rcar_gen3_control_otg_irq(ch, 0);
+
+	rcar_gen3_enable_vbus_ctrl(ch, 1);
+	rcar_gen3_init_for_host(ch);
+
+	rcar_gen3_control_otg_irq(ch, 1);
+}
+
+static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
+{
+	if (!ch->uses_otg_pins)
+		return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true;
+
+	return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
+}
+
+static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
+{
+	if (!rcar_gen3_check_id(ch))
+		rcar_gen3_init_for_host(ch);
+	else
+		rcar_gen3_init_for_peri(ch);
+}
+
+static bool rcar_gen3_is_host(struct rcar_gen3_chan *ch)
+{
+	return !(readl(ch->base + USB2_COMMCTRL) & USB2_COMMCTRL_OTG_PERI);
+}
+
+static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch)
+{
+	if (rcar_gen3_is_host(ch))
+		return PHY_MODE_USB_HOST;
+
+	return PHY_MODE_USB_DEVICE;
+}
+
+static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch)
+{
+	int i;
+
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		if (ch->rphys[i].initialized)
+			return true;
+	}
+
+	return false;
+}
+
+static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch)
+{
+	int i;
+
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		if (ch->rphys[i].otg_initialized)
+			return false;
+	}
+
+	return true;
+}
+
+static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch)
+{
+	int i;
+
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		if (ch->rphys[i].powered)
+			return false;
+	}
+
+	return true;
+}
+
+static ssize_t role_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+	bool is_b_device;
+	enum phy_mode cur_mode, new_mode;
+
+	if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
+		return -EIO;
+
+	if (sysfs_streq(buf, "host"))
+		new_mode = PHY_MODE_USB_HOST;
+	else if (sysfs_streq(buf, "peripheral"))
+		new_mode = PHY_MODE_USB_DEVICE;
+	else
+		return -EINVAL;
+
+	/* is_b_device: true is B-Device. false is A-Device. */
+	is_b_device = rcar_gen3_check_id(ch);
+	cur_mode = rcar_gen3_get_phy_mode(ch);
+
+	/* If current and new mode is the same, this returns the error */
+	if (cur_mode == new_mode)
+		return -EINVAL;
+
+	if (new_mode == PHY_MODE_USB_HOST) { /* And is_host must be false */
+		if (!is_b_device)	/* A-Peripheral */
+			rcar_gen3_init_from_a_peri_to_a_host(ch);
+		else			/* B-Peripheral */
+			rcar_gen3_init_for_b_host(ch);
+	} else {			/* And is_host must be true */
+		if (!is_b_device)	/* A-Host */
+			rcar_gen3_init_for_a_peri(ch);
+		else			/* B-Host */
+			rcar_gen3_init_for_peri(ch);
+	}
+
+	return count;
+}
+
+static ssize_t role_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+
+	if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch))
+		return -EIO;
+
+	return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" :
+							    "peripheral");
+}
+static DEVICE_ATTR_RW(role);
+
+static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
+{
+	void __iomem *usb2_base = ch->base;
+	u32 val;
+
+	/* Should not use functions of read-modify-write a register */
+	val = readl(usb2_base + USB2_LINECTRL1);
+	val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN |
+	      USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
+	writel(val, usb2_base + USB2_LINECTRL1);
+
+	val = readl(usb2_base + USB2_VBCTRL);
+	val &= ~USB2_VBCTRL_OCCLREN;
+	writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
+	val = readl(usb2_base + USB2_ADPCTRL);
+	writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
+
+	msleep(20);
+
+	writel(0xffffffff, usb2_base + USB2_OBINTSTA);
+	writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+
+	rcar_gen3_device_recognition(ch);
+}
+
+static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
+{
+	struct rcar_gen3_chan *ch = _ch;
+	void __iomem *usb2_base = ch->base;
+	u32 status = readl(usb2_base + USB2_OBINTSTA);
+	irqreturn_t ret = IRQ_NONE;
+
+	if (status & USB2_OBINT_BITS) {
+		dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
+		writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+		rcar_gen3_device_recognition(ch);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int rcar_gen3_phy_usb2_init(struct phy *p)
+{
+	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+	struct rcar_gen3_chan *channel = rphy->ch;
+	void __iomem *usb2_base = channel->base;
+	u32 val;
+	int ret;
+
+	if (!rcar_gen3_is_any_rphy_initialized(channel) && channel->irq >= 0) {
+		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
+		ret = request_irq(channel->irq, rcar_gen3_phy_usb2_irq,
+				  IRQF_SHARED, dev_name(channel->dev), channel);
+		if (ret < 0) {
+			dev_err(channel->dev, "No irq handler (%d)\n", channel->irq);
+			return ret;
+		}
+	}
+
+	/* Initialize USB2 part */
+	val = readl(usb2_base + USB2_INT_ENABLE);
+	val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits;
+	writel(val, usb2_base + USB2_INT_ENABLE);
+	writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
+	writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
+
+	/* Initialize otg part */
+	if (channel->is_otg_channel) {
+		if (rcar_gen3_needs_init_otg(channel))
+			rcar_gen3_init_otg(channel);
+		rphy->otg_initialized = true;
+	}
+
+	rphy->initialized = true;
+
+	return 0;
+}
+
+static int rcar_gen3_phy_usb2_exit(struct phy *p)
+{
+	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+	struct rcar_gen3_chan *channel = rphy->ch;
+	void __iomem *usb2_base = channel->base;
+	u32 val;
+
+	rphy->initialized = false;
+
+	if (channel->is_otg_channel)
+		rphy->otg_initialized = false;
+
+	val = readl(usb2_base + USB2_INT_ENABLE);
+	val &= ~rphy->int_enable_bits;
+	if (!rcar_gen3_is_any_rphy_initialized(channel))
+		val &= ~USB2_INT_ENABLE_UCOM_INTEN;
+	writel(val, usb2_base + USB2_INT_ENABLE);
+
+	if (channel->irq >= 0 && !rcar_gen3_is_any_rphy_initialized(channel))
+		free_irq(channel->irq, channel);
+
+	return 0;
+}
+
+static int rcar_gen3_phy_usb2_power_on(struct phy *p)
+{
+	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+	struct rcar_gen3_chan *channel = rphy->ch;
+	void __iomem *usb2_base = channel->base;
+	u32 val;
+	int ret = 0;
+
+	mutex_lock(&channel->lock);
+	if (!rcar_gen3_are_all_rphys_power_off(channel))
+		goto out;
+
+	if (channel->vbus) {
+		ret = regulator_enable(channel->vbus);
+		if (ret)
+			goto out;
+	}
+
+	val = readl(usb2_base + USB2_USBCTR);
+	val |= USB2_USBCTR_PLL_RST;
+	writel(val, usb2_base + USB2_USBCTR);
+	val &= ~USB2_USBCTR_PLL_RST;
+	writel(val, usb2_base + USB2_USBCTR);
+
+out:
+	/* The powered flag should be set for any other phys anyway */
+	rphy->powered = true;
+	mutex_unlock(&channel->lock);
+
+	return 0;
+}
+
+static int rcar_gen3_phy_usb2_power_off(struct phy *p)
+{
+	struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
+	struct rcar_gen3_chan *channel = rphy->ch;
+	int ret = 0;
+
+	mutex_lock(&channel->lock);
+	rphy->powered = false;
+
+	if (!rcar_gen3_are_all_rphys_power_off(channel))
+		goto out;
+
+	if (channel->vbus)
+		ret = regulator_disable(channel->vbus);
+
+out:
+	mutex_unlock(&channel->lock);
+
+	return ret;
+}
+
+static const struct phy_ops rcar_gen3_phy_usb2_ops = {
+	.init		= rcar_gen3_phy_usb2_init,
+	.exit		= rcar_gen3_phy_usb2_exit,
+	.power_on	= rcar_gen3_phy_usb2_power_on,
+	.power_off	= rcar_gen3_phy_usb2_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct phy_ops rz_g1c_phy_usb2_ops = {
+	.init		= rcar_gen3_phy_usb2_init,
+	.exit		= rcar_gen3_phy_usb2_exit,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
+	{
+		.compatible = "renesas,usb2-phy-r8a77470",
+		.data = &rz_g1c_phy_usb2_ops,
+	},
+	{
+		.compatible = "renesas,usb2-phy-r8a7795",
+		.data = &rcar_gen3_phy_usb2_ops,
+	},
+	{
+		.compatible = "renesas,usb2-phy-r8a7796",
+		.data = &rcar_gen3_phy_usb2_ops,
+	},
+	{
+		.compatible = "renesas,usb2-phy-r8a77965",
+		.data = &rcar_gen3_phy_usb2_ops,
+	},
+	{
+		.compatible = "renesas,rcar-gen3-usb2-phy",
+		.data = &rcar_gen3_phy_usb2_ops,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
+
+static const unsigned int rcar_gen3_phy_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev,
+					    struct of_phandle_args *args)
+{
+	struct rcar_gen3_chan *ch = dev_get_drvdata(dev);
+
+	if (args->args_count == 0)	/* For old version dts */
+		return ch->rphys[PHY_INDEX_BOTH_HC].phy;
+	else if (args->args_count > 1)	/* Prevent invalid args count */
+		return ERR_PTR(-ENODEV);
+
+	if (args->args[0] >= NUM_OF_PHYS)
+		return ERR_PTR(-ENODEV);
+
+	return ch->rphys[args->args[0]].phy;
+}
+
+static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
+{
+	enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN;
+	int i;
+
+	/*
+	 * If one of device nodes has other dr_mode except UNKNOWN,
+	 * this function returns UNKNOWN. To achieve backward compatibility,
+	 * this loop starts the index as 0.
+	 */
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i);
+
+		if (mode != USB_DR_MODE_UNKNOWN) {
+			if (candidate == USB_DR_MODE_UNKNOWN)
+				candidate = mode;
+			else if (candidate != mode)
+				return USB_DR_MODE_UNKNOWN;
+		}
+	}
+
+	return candidate;
+}
+
+static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rcar_gen3_chan *channel;
+	struct phy_provider *provider;
+	struct resource *res;
+	const struct phy_ops *phy_usb2_ops;
+	int ret = 0, i;
+
+	if (!dev->of_node) {
+		dev_err(dev, "This driver needs device tree\n");
+		return -EINVAL;
+	}
+
+	channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
+	if (!channel)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	channel->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(channel->base))
+		return PTR_ERR(channel->base);
+
+	/* get irq number here and request_irq for OTG in phy_init */
+	channel->irq = platform_get_irq_optional(pdev, 0);
+	channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
+	if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
+		int ret;
+
+		channel->is_otg_channel = true;
+		channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
+							"renesas,no-otg-pins");
+		channel->extcon = devm_extcon_dev_allocate(dev,
+							rcar_gen3_phy_cable);
+		if (IS_ERR(channel->extcon))
+			return PTR_ERR(channel->extcon);
+
+		ret = devm_extcon_dev_register(dev, channel->extcon);
+		if (ret < 0) {
+			dev_err(dev, "Failed to register extcon\n");
+			return ret;
+		}
+	}
+
+	/*
+	 * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+	 * And then, phy-core will manage runtime pm for this device.
+	 */
+	pm_runtime_enable(dev);
+	phy_usb2_ops = of_device_get_match_data(dev);
+	if (!phy_usb2_ops) {
+		ret = -EINVAL;
+		goto error;
+	}
+
+	mutex_init(&channel->lock);
+	for (i = 0; i < NUM_OF_PHYS; i++) {
+		channel->rphys[i].phy = devm_phy_create(dev, NULL,
+							phy_usb2_ops);
+		if (IS_ERR(channel->rphys[i].phy)) {
+			dev_err(dev, "Failed to create USB2 PHY\n");
+			ret = PTR_ERR(channel->rphys[i].phy);
+			goto error;
+		}
+		channel->rphys[i].ch = channel;
+		channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i];
+		phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]);
+	}
+
+	channel->vbus = devm_regulator_get_optional(dev, "vbus");
+	if (IS_ERR(channel->vbus)) {
+		if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) {
+			ret = PTR_ERR(channel->vbus);
+			goto error;
+		}
+		channel->vbus = NULL;
+	}
+
+	platform_set_drvdata(pdev, channel);
+	channel->dev = dev;
+
+	provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "Failed to register PHY provider\n");
+		ret = PTR_ERR(provider);
+		goto error;
+	} else if (channel->is_otg_channel) {
+		int ret;
+
+		ret = device_create_file(dev, &dev_attr_role);
+		if (ret < 0)
+			goto error;
+	}
+
+	return 0;
+
+error:
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int rcar_gen3_phy_usb2_remove(struct platform_device *pdev)
+{
+	struct rcar_gen3_chan *channel = platform_get_drvdata(pdev);
+
+	if (channel->is_otg_channel)
+		device_remove_file(&pdev->dev, &dev_attr_role);
+
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_usb2_driver = {
+	.driver = {
+		.name		= "phy_rcar_gen3_usb2",
+		.of_match_table	= rcar_gen3_phy_usb2_match_table,
+	},
+	.probe	= rcar_gen3_phy_usb2_probe,
+	.remove = rcar_gen3_phy_usb2_remove,
+};
+module_platform_driver(rcar_gen3_phy_usb2_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb3.c b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
new file mode 100644
index 000000000..566b4cf4f
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car Gen3 for USB3.0 PHY driver
+ *
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define USB30_CLKSET0		0x034
+#define USB30_CLKSET1		0x036
+#define USB30_SSC_SET		0x038
+#define USB30_PHY_ENABLE	0x060
+#define USB30_VBUS_EN		0x064
+
+/* USB30_CLKSET0 */
+#define CLKSET0_PRIVATE			0x05c0
+#define CLKSET0_USB30_FSEL_USB_EXTAL	0x0002
+
+/* USB30_CLKSET1 */
+#define CLKSET1_USB30_PLL_MULTI_SHIFT		6
+#define CLKSET1_USB30_PLL_MULTI_USB_EXTAL	(0x64 << \
+						 CLKSET1_USB30_PLL_MULTI_SHIFT)
+#define CLKSET1_PHYRESET	BIT(4)	/* 1: reset */
+#define CLKSET1_REF_CLKDIV	BIT(3)	/* 1: USB_EXTAL */
+#define CLKSET1_PRIVATE_2_1	BIT(1)	/* Write B'01 */
+#define CLKSET1_REF_CLK_SEL	BIT(0)	/* 1: USB3S0_CLK_P */
+
+/* USB30_SSC_SET */
+#define SSC_SET_SSC_EN		BIT(12)
+#define SSC_SET_RANGE_SHIFT	9
+#define SSC_SET_RANGE_4980	(0x0 << SSC_SET_RANGE_SHIFT)
+#define SSC_SET_RANGE_4492	(0x1 << SSC_SET_RANGE_SHIFT)
+#define SSC_SET_RANGE_4003	(0x2 << SSC_SET_RANGE_SHIFT)
+
+/* USB30_PHY_ENABLE */
+#define PHY_ENABLE_RESET_EN	BIT(4)
+
+/* USB30_VBUS_EN */
+#define VBUS_EN_VBUS_EN		BIT(1)
+
+struct rcar_gen3_usb3 {
+	void __iomem *base;
+	struct phy *phy;
+	u32 ssc_range;
+	bool usb3s_clk;
+	bool usb_extal;
+};
+
+static void write_clkset1_for_usb_extal(struct rcar_gen3_usb3 *r, bool reset)
+{
+	u16 val = CLKSET1_USB30_PLL_MULTI_USB_EXTAL |
+		  CLKSET1_REF_CLKDIV | CLKSET1_PRIVATE_2_1;
+
+	if (reset)
+		val |= CLKSET1_PHYRESET;
+
+	writew(val, r->base + USB30_CLKSET1);
+}
+
+static void rcar_gen3_phy_usb3_enable_ssc(struct rcar_gen3_usb3 *r)
+{
+	u16 val = SSC_SET_SSC_EN;
+
+	switch (r->ssc_range) {
+	case 4980:
+		val |= SSC_SET_RANGE_4980;
+		break;
+	case 4492:
+		val |= SSC_SET_RANGE_4492;
+		break;
+	case 4003:
+		val |= SSC_SET_RANGE_4003;
+		break;
+	default:
+		dev_err(&r->phy->dev, "%s: unsupported range (%x)\n", __func__,
+			r->ssc_range);
+		return;
+	}
+
+	writew(val, r->base + USB30_SSC_SET);
+}
+
+static void rcar_gen3_phy_usb3_select_usb_extal(struct rcar_gen3_usb3 *r)
+{
+	write_clkset1_for_usb_extal(r, false);
+	if (r->ssc_range)
+		rcar_gen3_phy_usb3_enable_ssc(r);
+	writew(CLKSET0_PRIVATE | CLKSET0_USB30_FSEL_USB_EXTAL,
+	       r->base + USB30_CLKSET0);
+	writew(PHY_ENABLE_RESET_EN, r->base + USB30_PHY_ENABLE);
+	write_clkset1_for_usb_extal(r, true);
+	usleep_range(10, 20);
+	write_clkset1_for_usb_extal(r, false);
+}
+
+static int rcar_gen3_phy_usb3_init(struct phy *p)
+{
+	struct rcar_gen3_usb3 *r = phy_get_drvdata(p);
+
+	dev_vdbg(&r->phy->dev, "%s: enter (%d, %d, %d)\n", __func__,
+		 r->usb3s_clk, r->usb_extal, r->ssc_range);
+
+	if (!r->usb3s_clk && r->usb_extal)
+		rcar_gen3_phy_usb3_select_usb_extal(r);
+
+	/* Enables VBUS detection anyway */
+	writew(VBUS_EN_VBUS_EN, r->base + USB30_VBUS_EN);
+
+	return 0;
+}
+
+static const struct phy_ops rcar_gen3_phy_usb3_ops = {
+	.init		= rcar_gen3_phy_usb3_init,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen3_phy_usb3_match_table[] = {
+	{ .compatible = "renesas,rcar-gen3-usb3-phy" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb3_match_table);
+
+static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rcar_gen3_usb3 *r;
+	struct phy_provider *provider;
+	struct resource *res;
+	int ret = 0;
+	struct clk *clk;
+
+	if (!dev->of_node) {
+		dev_err(dev, "This driver needs device tree\n");
+		return -EINVAL;
+	}
+
+	r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
+	if (!r)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	r->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(r->base))
+		return PTR_ERR(r->base);
+
+	clk = devm_clk_get(dev, "usb3s_clk");
+	if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+		r->usb3s_clk = !!clk_get_rate(clk);
+		clk_disable_unprepare(clk);
+	}
+	clk = devm_clk_get(dev, "usb_extal");
+	if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+		r->usb_extal = !!clk_get_rate(clk);
+		clk_disable_unprepare(clk);
+	}
+
+	if (!r->usb3s_clk && !r->usb_extal) {
+		dev_err(dev, "This driver needs usb3s_clk and/or usb_extal\n");
+		ret = -EINVAL;
+		goto error;
+	}
+
+	/*
+	 * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+	 * And then, phy-core will manage runtime pm for this device.
+	 */
+	pm_runtime_enable(dev);
+
+	r->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb3_ops);
+	if (IS_ERR(r->phy)) {
+		dev_err(dev, "Failed to create USB3 PHY\n");
+		ret = PTR_ERR(r->phy);
+		goto error;
+	}
+
+	of_property_read_u32(dev->of_node, "renesas,ssc-range", &r->ssc_range);
+
+	platform_set_drvdata(pdev, r);
+	phy_set_drvdata(r->phy, r);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "Failed to register PHY provider\n");
+		ret = PTR_ERR(provider);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int rcar_gen3_phy_usb3_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_usb3_driver = {
+	.driver = {
+		.name		= "phy_rcar_gen3_usb3",
+		.of_match_table	= rcar_gen3_phy_usb3_match_table,
+	},
+	.probe	= rcar_gen3_phy_usb3_probe,
+	.remove = rcar_gen3_phy_usb3_remove,
+};
+module_platform_driver(rcar_gen3_phy_usb3_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 3.0 PHY");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");