Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1428 insertions, 0 deletions

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
new file mode 100644
index 000000000..c14c145b8
--- /dev/null
+++ b/drivers/platform/x86/Kconfig
@@ -0,0 +1,1428 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# X86 Platform Specific Drivers
+#
+
+menuconfig X86_PLATFORM_DEVICES
+	bool "X86 Platform Specific Device Drivers"
+	default y
+	depends on X86
+	help
+	  Say Y here to get to see options for device drivers for various
+	  x86 platforms, including vendor-specific laptop extension drivers.
+	  This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if X86_PLATFORM_DEVICES
+
+config ACPI_WMI
+	tristate "WMI"
+	depends on ACPI
+	help
+	  This driver adds support for the ACPI-WMI (Windows Management
+	  Instrumentation) mapper device (PNP0C14) found on some systems.
+
+	  ACPI-WMI is a proprietary extension to ACPI to expose parts of the
+	  ACPI firmware to userspace - this is done through various vendor
+	  defined methods and data blocks in a PNP0C14 device, which are then
+	  made available for userspace to call.
+
+	  The implementation of this in Linux currently only exposes this to
+	  other kernel space drivers.
+
+	  This driver is a required dependency to build the firmware specific
+	  drivers needed on many machines, including Acer and HP laptops.
+
+	  It is safe to enable this driver even if your DSDT doesn't define
+	  any ACPI-WMI devices.
+
+config WMI_BMOF
+	tristate "WMI embedded Binary MOF driver"
+	depends on ACPI_WMI
+	default ACPI_WMI
+	help
+	  Say Y here if you want to be able to read a firmware-embedded
+	  WMI Binary MOF data. Using this requires userspace tools and may be
+	  rather tedious.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called wmi-bmof.
+
+config ALIENWARE_WMI
+	tristate "Alienware Special feature control"
+	depends on ACPI
+	depends on LEDS_CLASS
+	depends on NEW_LEDS
+	depends on ACPI_WMI
+	help
+	 This is a driver for controlling Alienware BIOS driven
+	 features.  It exposes an interface for controlling the AlienFX
+	 zones on Alienware machines that don't contain a dedicated AlienFX
+	 USB MCU such as the X51 and X51-R2.
+
+config HUAWEI_WMI
+	tristate "Huawei WMI laptop extras driver"
+	depends on ACPI_BATTERY
+	depends on ACPI_WMI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	select LEDS_CLASS
+	select LEDS_TRIGGERS
+	select LEDS_TRIGGER_AUDIO
+	select NEW_LEDS
+	help
+	  This driver provides support for Huawei WMI hotkeys, battery charge
+	  control, fn-lock, mic-mute LED, and other extra features.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called huawei-wmi.
+
+config INTEL_WMI_SBL_FW_UPDATE
+	tristate "Intel WMI Slim Bootloader firmware update signaling driver"
+	depends on ACPI_WMI
+	help
+	  Say Y here if you want to be able to use the WMI interface to signal
+	  Slim Bootloader to trigger update on next reboot.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel-wmi-sbl-fw-update.
+
+config INTEL_WMI_THUNDERBOLT
+	tristate "Intel WMI thunderbolt force power driver"
+	depends on ACPI_WMI
+	help
+	  Say Y here if you want to be able to use the WMI interface on select
+	  systems to force the power control of Intel Thunderbolt controllers.
+	  This is useful for updating the firmware when devices are not plugged
+	  into the controller.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel-wmi-thunderbolt.
+
+config MXM_WMI
+       tristate "WMI support for MXM Laptop Graphics"
+       depends on ACPI_WMI
+	help
+          MXM is a standard for laptop graphics cards, the WMI interface
+	  is required for switchable nvidia graphics machines
+
+config PEAQ_WMI
+	tristate "PEAQ 2-in-1 WMI hotkey driver"
+	depends on ACPI_WMI
+	depends on INPUT
+	help
+	 Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s.
+
+config XIAOMI_WMI
+	tristate "Xiaomi WMI key driver"
+	depends on ACPI_WMI
+	depends on INPUT
+	help
+	  Say Y here if you want to support WMI-based keys on Xiaomi notebooks.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called xiaomi-wmi.
+
+config ACERHDF
+	tristate "Acer Aspire One temperature and fan driver"
+	depends on ACPI && THERMAL
+	select THERMAL_GOV_BANG_BANG
+	help
+	  This is a driver for Acer Aspire One netbooks. It allows to access
+	  the temperature sensor and to control the fan.
+
+	  After loading this driver the BIOS is still in control of the fan.
+	  To let the kernel handle the fan, do:
+	  echo -n enabled > /sys/class/thermal/thermal_zoneN/mode
+	  where N=0,1,2... depending on the number of thermal nodes and the
+	  detection order of your particular system.  The "type" parameter
+	  in the same node directory will tell you if it is "acerhdf".
+
+	  For more information about this driver see
+	  <https://piie.net/files/acerhdf_README.txt>
+
+	  If you have an Acer Aspire One netbook, say Y or M
+	  here.
+
+config ACER_WIRELESS
+        tristate "Acer Wireless Radio Control Driver"
+        depends on ACPI
+        depends on INPUT
+	help
+          The Acer Wireless Radio Control handles the airplane mode hotkey
+          present on new Acer laptops.
+
+          Say Y or M here if you have an Acer notebook with an airplane mode
+          hotkey.
+
+          If you choose to compile this driver as a module the module will be
+          called acer-wireless.
+
+config ACER_WMI
+	tristate "Acer WMI Laptop Extras"
+	depends on ACPI
+	select LEDS_CLASS
+	select NEW_LEDS
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on SERIO_I8042
+	depends on INPUT
+	depends on RFKILL || RFKILL = n
+	depends on ACPI_WMI
+	select INPUT_SPARSEKMAP
+	# Acer WMI depends on ACPI_VIDEO when ACPI is enabled
+        select ACPI_VIDEO if ACPI
+	help
+	  This is a driver for newer Acer (and Wistron) laptops. It adds
+	  wireless radio and bluetooth control, and on some laptops,
+	  exposes the mail LED and LCD backlight.
+
+	  If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
+	  here.
+
+config APPLE_GMUX
+	tristate "Apple Gmux Driver"
+	depends on ACPI && PCI
+	depends on PNP
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE
+	depends on ACPI_VIDEO=n || ACPI_VIDEO
+	help
+	  This driver provides support for the gmux device found on many
+	  Apple laptops, which controls the display mux for the hybrid
+	  graphics as well as the backlight. Currently only backlight
+	  control is supported by the driver.
+
+config ASUS_LAPTOP
+	tristate "Asus Laptop Extras"
+	depends on ACPI
+	select LEDS_CLASS
+	select NEW_LEDS
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on INPUT
+	depends on RFKILL || RFKILL = n
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	select INPUT_SPARSEKMAP
+	help
+	  This is a driver for Asus laptops, Lenovo SL and the Pegatron
+	  Lucid tablet. It may also support some MEDION, JVC or VICTOR
+	  laptops. It makes all the extra buttons generate standard
+	  ACPI events and input events, and on the Lucid the built-in
+	  accelerometer appears as an input device.  It also adds
+	  support for video output switching, LCD backlight control,
+	  Bluetooth and Wlan control, and most importantly, allows you
+	  to blink those fancy LEDs.
+
+	  For more information see <http://acpi4asus.sf.net>.
+
+	  If you have an ACPI-compatible ASUS laptop, say Y or M here.
+
+config ASUS_WIRELESS
+	tristate "Asus Wireless Radio Control Driver"
+	depends on ACPI
+	depends on INPUT
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  The Asus Wireless Radio Control handles the airplane mode hotkey
+	  present on some Asus laptops.
+
+	  Say Y or M here if you have an ASUS notebook with an airplane mode
+	  hotkey.
+
+	  If you choose to compile this driver as a module the module will be
+	  called asus-wireless.
+
+config ASUS_WMI
+	tristate "ASUS WMI Driver"
+	depends on ACPI_WMI
+	depends on ACPI_BATTERY
+	depends on INPUT
+	depends on HWMON
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on RFKILL || RFKILL = n
+	depends on HOTPLUG_PCI
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on SERIO_I8042 || SERIO_I8042 = n
+	select INPUT_SPARSEKMAP
+	select LEDS_CLASS
+	select NEW_LEDS
+	help
+	  Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new
+	  Asus Notebooks).
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called asus-wmi.
+
+config ASUS_NB_WMI
+	tristate "Asus Notebook WMI Driver"
+	depends on ASUS_WMI
+	help
+	  This is a driver for newer Asus notebooks. It adds extra features
+	  like wireless radio and bluetooth control, leds, hotkeys, backlight...
+
+	  For more information, see
+	  <file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
+
+	  If you have an ACPI-WMI compatible Asus Notebook, say Y or M
+	  here.
+
+config EEEPC_LAPTOP
+	tristate "Eee PC Hotkey Driver"
+	depends on ACPI
+	depends on INPUT
+	depends on RFKILL || RFKILL = n
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on HOTPLUG_PCI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select HWMON
+	select LEDS_CLASS
+	select NEW_LEDS
+	select INPUT_SPARSEKMAP
+	help
+	  This driver supports the Fn-Fx keys on Eee PC laptops.
+
+	  It  also gives access to some extra laptop functionalities like
+	  Bluetooth, backlight and allows powering on/off some other
+	  devices.
+
+	  If you have an Eee PC laptop, say Y or M here. If this driver
+	  doesn't work on your Eee PC, try eeepc-wmi instead.
+
+config EEEPC_WMI
+	tristate "Eee PC WMI Driver"
+	depends on ASUS_WMI
+	help
+	  This is a driver for newer Eee PC laptops. It adds extra features
+	  like wireless radio and bluetooth control, leds, hotkeys, backlight...
+
+	  For more information, see
+	  <file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
+
+	  If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
+	  here.
+
+config DCDBAS
+	tristate "Dell Systems Management Base Driver"
+	depends on X86
+	help
+	  The Dell Systems Management Base Driver provides a sysfs interface
+	  for systems management software to perform System Management
+	  Interrupts (SMIs) and Host Control Actions (system power cycle or
+	  power off after OS shutdown) on certain Dell systems.
+
+	  See <file:Documentation/driver-api/dcdbas.rst> for more details on the driver
+	  and the Dell systems on which Dell systems management software makes
+	  use of this driver.
+
+	  Say Y or M here to enable the driver for use by Dell systems
+	  management software such as Dell OpenManage.
+
+#
+# The DELL_SMBIOS driver depends on ACPI_WMI and/or DCDBAS if those
+# backends are selected. The "depends" line prevents a configuration
+# where DELL_SMBIOS=y while either of those dependencies =m.
+#
+config DELL_SMBIOS
+	tristate "Dell SMBIOS driver"
+	depends on DCDBAS || DCDBAS=n
+	depends on ACPI_WMI || ACPI_WMI=n
+	help
+	This provides support for the Dell SMBIOS calling interface.
+	If you have a Dell computer you should enable this option.
+
+	Be sure to select at least one backend for it to work properly.
+
+config DELL_SMBIOS_WMI
+	bool "Dell SMBIOS driver WMI backend"
+	default y
+	depends on ACPI_WMI
+	select DELL_WMI_DESCRIPTOR
+	depends on DELL_SMBIOS
+	help
+	This provides an implementation for the Dell SMBIOS calling interface
+	communicated over ACPI-WMI.
+
+	If you have a Dell computer from >2007 you should say Y here.
+	If you aren't sure and this module doesn't work for your computer
+	it just won't load.
+
+config DELL_SMBIOS_SMM
+	bool "Dell SMBIOS driver SMM backend"
+	default y
+	depends on DCDBAS
+	depends on DELL_SMBIOS
+	help
+	This provides an implementation for the Dell SMBIOS calling interface
+	communicated over SMI/SMM.
+
+	If you have a Dell computer from <=2017 you should say Y here.
+	If you aren't sure and this module doesn't work for your computer
+	it just won't load.
+
+config DELL_LAPTOP
+	tristate "Dell Laptop Extras"
+	depends on DMI
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on RFKILL || RFKILL = n
+	depends on SERIO_I8042
+	depends on DELL_SMBIOS
+	select POWER_SUPPLY
+	select LEDS_CLASS
+	select NEW_LEDS
+	select LEDS_TRIGGERS
+	select LEDS_TRIGGER_AUDIO
+	help
+	This driver adds support for rfkill and backlight control to Dell
+	laptops (except for some models covered by the Compal driver).
+
+config DELL_RBTN
+	tristate "Dell Airplane Mode Switch driver"
+	depends on ACPI
+	depends on INPUT
+	depends on RFKILL
+	help
+	  Say Y here if you want to support Dell Airplane Mode Switch ACPI
+	  device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
+	  This driver register rfkill device or input hotkey device depending
+	  on hardware type (hw switch slider or keyboard toggle button). For
+	  rfkill devices it receive HW switch events and set correct hard
+	  rfkill state.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-rbtn.
+
+config DELL_RBU
+	tristate "BIOS update support for DELL systems via sysfs"
+	depends on X86
+	select FW_LOADER
+	select FW_LOADER_USER_HELPER
+	help
+	 Say m if you want to have the option of updating the BIOS for your
+	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
+	 supporting application to communicate with the BIOS regarding the new
+	 image for the image update to take effect.
+	 See <file:Documentation/admin-guide/dell_rbu.rst> for more details on the driver.
+
+config DELL_SMO8800
+	tristate "Dell Latitude freefall driver (ACPI SMO88XX)"
+	depends on ACPI
+	help
+	  Say Y here if you want to support SMO88XX freefall devices
+	  on Dell Latitude laptops.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-smo8800.
+
+config DELL_WMI
+	tristate "Dell WMI notifications"
+	depends on ACPI_WMI
+	depends on DMI
+	depends on INPUT
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on DELL_SMBIOS
+	select DELL_WMI_DESCRIPTOR
+	select INPUT_SPARSEKMAP
+	help
+	  Say Y here if you want to support WMI-based hotkeys on Dell laptops.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-wmi.
+
+config DELL_WMI_DESCRIPTOR
+	tristate
+	depends on ACPI_WMI
+
+config DELL_WMI_AIO
+	tristate "WMI Hotkeys for Dell All-In-One series"
+	depends on ACPI_WMI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	help
+	  Say Y here if you want to support WMI-based hotkeys on Dell
+	  All-In-One machines.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-wmi-aio.
+
+config DELL_WMI_LED
+	tristate "External LED on Dell Business Netbooks"
+	depends on LEDS_CLASS
+	depends on ACPI_WMI
+	help
+	  This adds support for the Latitude 2100 and similar
+	  notebooks that have an external LED.
+
+config AMILO_RFKILL
+	tristate "Fujitsu-Siemens Amilo rfkill support"
+	depends on RFKILL
+	depends on SERIO_I8042
+	help
+	  This is a driver for enabling wifi on some Fujitsu-Siemens Amilo
+	  laptops.
+
+config FUJITSU_LAPTOP
+	tristate "Fujitsu Laptop Extras"
+	depends on ACPI
+	depends on INPUT
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	select INPUT_SPARSEKMAP
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  This is a driver for laptops built by Fujitsu:
+
+	    * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
+	    * Possibly other Fujitsu laptop models
+	    * Tested with S6410 and S7020
+
+	  It adds support for LCD brightness control and some hotkeys.
+
+	  If you have a Fujitsu laptop, say Y or M here.
+
+config FUJITSU_TABLET
+       tristate "Fujitsu Tablet Extras"
+       depends on ACPI
+       depends on INPUT
+	help
+         This is a driver for tablets built by Fujitsu:
+
+           * Lifebook P1510/P1610/P1620/Txxxx
+           * Stylistic ST5xxx
+           * Possibly other Fujitsu tablet models
+
+         It adds support for the panel buttons, docking station detection,
+         tablet/notebook mode detection for convertible and
+         orientation detection for docked slates.
+
+         If you have a Fujitsu convertible or slate, say Y or M here.
+
+config GPD_POCKET_FAN
+	tristate "GPD Pocket Fan Controller support"
+	depends on ACPI
+	depends on THERMAL
+	help
+	  Driver for the GPD Pocket vendor specific FAN02501 ACPI device
+	  which controls the fan speed on the GPD Pocket.
+
+	  Without this driver the fan on the Pocket will stay off independent
+	  of the CPU temperature. Say Y or M if the kernel may be used on a
+	  GPD pocket.
+
+config HP_ACCEL
+	tristate "HP laptop accelerometer"
+	depends on INPUT && ACPI
+	depends on SERIO_I8042
+	select SENSORS_LIS3LV02D
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  This driver provides support for the "Mobile Data Protection System 3D"
+	  or "3D DriveGuard" feature of HP laptops. On such systems the driver
+	  should load automatically (via ACPI alias).
+
+	  Support for a led indicating disk protection will be provided as
+	  hp::hddprotect. For more information on the feature, refer to
+	  Documentation/misc-devices/lis3lv02d.rst.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called hp_accel.
+
+config HP_WIRELESS
+	tristate "HP wireless button"
+	depends on ACPI
+	depends on INPUT
+	help
+	 This driver provides supports for new HP wireless button for Windows 8.
+	 On such systems the driver should load automatically (via ACPI alias).
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called hp-wireless.
+
+config HP_WMI
+	tristate "HP WMI extras"
+	depends on ACPI_WMI
+	depends on INPUT
+	depends on RFKILL || RFKILL = n
+	select INPUT_SPARSEKMAP
+	help
+	 Say Y here if you want to support WMI-based hotkeys on HP laptops and
+	 to read data from WMI such as docking or ambient light sensor state.
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called hp-wmi.
+
+config TC1100_WMI
+	tristate "HP Compaq TC1100 Tablet WMI Extras"
+	depends on !X86_64
+	depends on ACPI
+	depends on ACPI_WMI
+	help
+	  This is a driver for the WMI extensions (wireless and bluetooth power
+	  control) of the HP Compaq TC1100 tablet.
+
+config IBM_RTL
+	tristate "Device driver to enable PRTL support"
+	depends on PCI
+	help
+	 Enable support for IBM Premium Real Time Mode (PRTM).
+	 This module will allow you the enter and exit PRTM in the BIOS via
+	 sysfs on platforms that support this feature.  System in PRTM will
+	 not receive CPU-generated SMIs for recoverable errors.  Use of this
+	 feature without proper support may void your hardware warranty.
+
+	 If the proper BIOS support is found the driver will load and create
+	 /sys/devices/system/ibm_rtl/.  The "state" variable will indicate
+	 whether or not the BIOS is in PRTM.
+	 state = 0 (BIOS SMIs on)
+	 state = 1 (BIOS SMIs off)
+
+config IDEAPAD_LAPTOP
+	tristate "Lenovo IdeaPad Laptop Extras"
+	depends on ACPI
+	depends on RFKILL && INPUT
+	depends on SERIO_I8042
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on ACPI_WMI || ACPI_WMI = n
+	select INPUT_SPARSEKMAP
+	help
+	  This is a driver for Lenovo IdeaPad netbooks contains drivers for
+	  rfkill switch, hotkey, fan control and backlight control.
+
+config SENSORS_HDAPS
+	tristate "Thinkpad Hard Drive Active Protection System (hdaps)"
+	depends on INPUT
+	help
+	  This driver provides support for the IBM Hard Drive Active Protection
+	  System (hdaps), which provides an accelerometer and other misc. data.
+	  ThinkPads starting with the R50, T41, and X40 are supported.  The
+	  accelerometer data is readable via sysfs.
+
+	  This driver also provides an absolute input class device, allowing
+	  the laptop to act as a pinball machine-esque joystick.
+
+	  If your ThinkPad is not recognized by the driver, please update to latest
+	  BIOS. This is especially the case for some R52 ThinkPads.
+
+	  Say Y here if you have an applicable laptop and want to experience
+	  the awesome power of hdaps.
+
+config THINKPAD_ACPI
+	tristate "ThinkPad ACPI Laptop Extras"
+	depends on ACPI
+	depends on ACPI_BATTERY
+	depends on INPUT
+	depends on RFKILL || RFKILL = n
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on BACKLIGHT_CLASS_DEVICE
+	select HWMON
+	select NVRAM
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGERS
+	select LEDS_TRIGGER_AUDIO
+	help
+	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
+	  support for Fn-Fx key combinations, Bluetooth control, video
+	  output switching, ThinkLight control, UltraBay eject and more.
+	  For more information about this driver see
+	  <file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and
+	  <http://ibm-acpi.sf.net/> .
+
+	  This driver was formerly known as ibm-acpi.
+
+	  Extra functionality will be available if the rfkill (CONFIG_RFKILL)
+	  and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
+	  Note that if you want ThinkPad-ACPI to be built-in instead of
+	  modular, ALSA and rfkill will also have to be built-in.
+
+	  If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+
+config THINKPAD_ACPI_ALSA_SUPPORT
+	bool "Console audio control ALSA interface"
+	depends on THINKPAD_ACPI
+	depends on SND
+	depends on SND = y || THINKPAD_ACPI = SND
+	default y
+	help
+	  Enables monitoring of the built-in console audio output control
+	  (headphone and speakers), which is operated by the mute and (in
+	  some ThinkPad models) volume hotkeys.
+
+	  If this option is enabled, ThinkPad-ACPI will export an ALSA card
+	  with a single read-only mixer control, which should be used for
+	  on-screen-display feedback purposes by the Desktop Environment.
+
+	  Optionally, the driver will also allow software control (the
+	  ALSA mixer will be made read-write).  Please refer to the driver
+	  documentation for details.
+
+	  All IBM models have both volume and mute control.  Newer Lenovo
+	  models only have mute control (the volume hotkeys are just normal
+	  keys and volume control is done through the main HDA mixer).
+
+config THINKPAD_ACPI_DEBUGFACILITIES
+	bool "Maintainer debug facilities"
+	depends on THINKPAD_ACPI
+	help
+	  Enables extra stuff in the thinkpad-acpi which is completely useless
+	  for normal use.  Read the driver source to find out what it does.
+
+	  Say N here, unless you were told by a kernel maintainer to do
+	  otherwise.
+
+config THINKPAD_ACPI_DEBUG
+	bool "Verbose debug mode"
+	depends on THINKPAD_ACPI
+	help
+	  Enables extra debugging information, at the expense of a slightly
+	  increase in driver size.
+
+	  If you are not sure, say N here.
+
+config THINKPAD_ACPI_UNSAFE_LEDS
+	bool "Allow control of important LEDs (unsafe)"
+	depends on THINKPAD_ACPI
+	help
+	  Overriding LED state on ThinkPads can mask important
+	  firmware alerts (like critical battery condition), or misled
+	  the user into damaging the hardware (undocking or ejecting
+	  the bay while buses are still active), etc.
+
+	  LED control on the ThinkPad is write-only (with very few
+	  exceptions on very ancient models), which makes it
+	  impossible to know beforehand if important information will
+	  be lost when one changes LED state.
+
+	  Users that know what they are doing can enable this option
+	  and the driver will allow control of every LED, including
+	  the ones on the dock stations.
+
+	  Never enable this option on a distribution kernel.
+
+	  Say N here, unless you are building a kernel for your own
+	  use, and need to control the important firmware LEDs.
+
+config THINKPAD_ACPI_VIDEO
+	bool "Video output control support"
+	depends on THINKPAD_ACPI
+	default y
+	help
+	  Allows the thinkpad_acpi driver to provide an interface to control
+	  the various video output ports.
+
+	  This feature often won't work well, depending on ThinkPad model,
+	  display state, video output devices in use, whether there is a X
+	  server running, phase of the moon, and the current mood of
+	  Schroedinger's cat.  If you can use X.org's RandR to control
+	  your ThinkPad's video output ports instead of this feature,
+	  don't think twice: do it and say N here to save memory and avoid
+	  bad interactions with X.org.
+
+	  NOTE: access to this feature is limited to processes with the
+	  CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms
+	  where it interacts badly with X.org.
+
+	  If you are not sure, say Y here but do try to check if you could
+	  be using X.org RandR instead.
+
+config THINKPAD_ACPI_HOTKEY_POLL
+	bool "Support NVRAM polling for hot keys"
+	depends on THINKPAD_ACPI
+	default y
+	help
+	  Some thinkpad models benefit from NVRAM polling to detect a few of
+	  the hot key press events.  If you know your ThinkPad model does not
+	  need to do NVRAM polling to support any of the hot keys you use,
+	  unselecting this option will save about 1kB of memory.
+
+	  ThinkPads T40 and newer, R52 and newer, and X31 and newer are
+	  unlikely to need NVRAM polling in their latest BIOS versions.
+
+	  NVRAM polling can detect at most the following keys: ThinkPad/Access
+	  IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
+	  Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
+
+	  If you are not sure, say Y here.  The driver enables polling only if
+	  it is strictly necessary to do so.
+
+config INTEL_ATOMISP2_LED
+	tristate "Intel AtomISP2 camera LED driver"
+	depends on GPIOLIB && LEDS_GPIO
+	help
+	  Many Bay Trail and Cherry Trail devices come with a camera attached
+	  to Intel's Image Signal Processor. Linux currently does not have a
+	  driver for these, so they do not work as a camera. Some of these
+	  camera's have a LED which is controlled through a GPIO.
+
+	  Some of these devices have a firmware issue where the LED gets turned
+	  on at boot. This driver will turn the LED off at boot and also allows
+	  controlling the LED (repurposing it) through the sysfs LED interface.
+
+	  Which GPIO is attached to the LED is usually not described in the
+	  ACPI tables, so this driver contains per-system info about the GPIO
+	  inside the driver, this means that this driver only works on systems
+	  the driver knows about.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_led.
+
+config INTEL_ATOMISP2_PM
+	tristate "Intel AtomISP2 dummy / power-management driver"
+	depends on PCI && IOSF_MBI && PM
+	depends on !INTEL_ATOMISP
+	help
+	  Power-management driver for Intel's Image Signal Processor found on
+	  Bay Trail and Cherry Trail devices. This dummy driver's sole purpose
+	  is to turn the ISP off (put it in D3) to save power and to allow
+	  entering of S0ix modes.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_atomisp2_pm.
+
+config INTEL_CHT_INT33FE
+	tristate "Intel Cherry Trail ACPI INT33FE Driver"
+	depends on X86 && ACPI && I2C && REGULATOR
+	depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
+	depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
+	depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
+	help
+	  This driver add support for the INT33FE ACPI device found on
+	  some Intel Cherry Trail devices.
+
+	  There are two kinds of INT33FE ACPI device possible: for hardware
+	  with USB Type-C and Micro-B connectors. This driver supports both.
+
+	  The INT33FE ACPI device has a CRS table with I2cSerialBusV2
+	  resources for Fuel Gauge Controller and (in the Type-C variant)
+	  FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
+	  This driver instantiates i2c-clients for these, so that standard
+	  i2c drivers for these chips can bind to the them.
+
+	  If you enable this driver it is advised to also select
+	  CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
+	  device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
+	  for Type-C device.
+
+config INTEL_HID_EVENT
+	tristate "INTEL HID Event"
+	depends on ACPI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	help
+	  This driver provides support for the Intel HID Event hotkey interface.
+	  Some laptops require this driver for hotkey support.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_hid.
+
+config INTEL_INT0002_VGPIO
+	tristate "Intel ACPI INT0002 Virtual GPIO driver"
+	depends on GPIOLIB && ACPI && PM_SLEEP
+	select GPIOLIB_IRQCHIP
+	help
+	  Some peripherals on Bay Trail and Cherry Trail platforms signal a
+	  Power Management Event (PME) to the Power Management Controller (PMC)
+	  to wakeup the system. When this happens software needs to explicitly
+	  clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
+	  IRQ storm on IRQ 9.
+
+	  This is modelled in ACPI through the INT0002 ACPI device, which is
+	  called a "Virtual GPIO controller" in ACPI because it defines the
+	  event handler to call when the PME triggers through _AEI and _L02
+	  methods as would be done for a real GPIO interrupt in ACPI.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_int0002_vgpio.
+
+config INTEL_MENLOW
+	tristate "Thermal Management driver for Intel menlow platform"
+	depends on ACPI_THERMAL
+	select THERMAL
+	help
+	  ACPI thermal management enhancement driver on
+	  Intel Menlow platform.
+
+	  If unsure, say N.
+
+config INTEL_OAKTRAIL
+	tristate "Intel Oaktrail Platform Extras"
+	depends on ACPI
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
+	help
+	  Intel Oaktrail platform need this driver to provide interfaces to
+	  enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
+	  here; it will only load on supported platforms.
+
+config INTEL_VBTN
+	tristate "INTEL VIRTUAL BUTTON"
+	depends on ACPI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	help
+	  This driver provides support for the Intel Virtual Button interface.
+	  Some laptops require this driver for power button support.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_vbtn.
+
+config SURFACE3_WMI
+	tristate "Surface 3 WMI Driver"
+	depends on ACPI_WMI
+	depends on DMI
+	depends on INPUT
+	depends on SPI
+	help
+	  Say Y here if you have a Surface 3.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called surface3-wmi.
+
+config SURFACE_3_BUTTON
+	tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet"
+	depends on ACPI && KEYBOARD_GPIO && I2C
+	help
+	  This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet.
+
+config SURFACE_3_POWER_OPREGION
+	tristate "Surface 3 battery platform operation region support"
+	depends on ACPI && I2C
+	help
+	  This driver provides support for ACPI operation
+	  region of the Surface 3 battery platform driver.
+
+config SURFACE_PRO3_BUTTON
+	tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet"
+	depends on ACPI && INPUT
+	help
+	  This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet.
+
+config MSI_LAPTOP
+	tristate "MSI Laptop Extras"
+	depends on ACPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on RFKILL
+	depends on INPUT && SERIO_I8042
+	select INPUT_SPARSEKMAP
+	help
+	  This is a driver for laptops built by MSI (MICRO-STAR
+	  INTERNATIONAL):
+
+	  MSI MegaBook S270 (MS-1013)
+	  Cytron/TCM/Medion/Tchibo MD96100/SAM2000
+
+	  It adds support for Bluetooth, WLAN and LCD brightness control.
+
+	  More information about this driver is available at
+	  <http://0pointer.de/lennart/tchibo.html>.
+
+	  If you have an MSI S270 laptop, say Y or M here.
+
+config MSI_WMI
+	tristate "MSI WMI extras"
+	depends on ACPI_WMI
+	depends on INPUT
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	select INPUT_SPARSEKMAP
+	help
+	 Say Y here if you want to support WMI-based hotkeys on MSI laptops.
+
+	 To compile this driver as a module, choose M here: the module will
+	 be called msi-wmi.
+
+config XO15_EBOOK
+	tristate "OLPC XO-1.5 ebook switch"
+	depends on OLPC || COMPILE_TEST
+	depends on ACPI && INPUT
+	help
+	  Support for the ebook switch on the OLPC XO-1.5 laptop.
+
+	  This switch is triggered as the screen is rotated and folded down to
+	  convert the device into ebook form.
+
+config XO1_RFKILL
+	tristate "OLPC XO-1 software RF kill switch"
+	depends on OLPC || COMPILE_TEST
+	depends on RFKILL
+	help
+	  Support for enabling/disabling the WLAN interface on the OLPC XO-1
+	  laptop.
+
+config PCENGINES_APU2
+	tristate "PC Engines APUv2/3 front button and LEDs driver"
+	depends on INPUT && INPUT_KEYBOARD && GPIOLIB
+	depends on LEDS_CLASS
+	select GPIO_AMD_FCH
+	select KEYBOARD_GPIO_POLLED
+	select LEDS_GPIO
+	help
+	  This driver provides support for the front button and LEDs on
+	  PC Engines APUv2/APUv3 board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pcengines-apuv2.
+
+config SAMSUNG_LAPTOP
+	tristate "Samsung Laptop driver"
+	depends on RFKILL || RFKILL = n
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on BACKLIGHT_CLASS_DEVICE
+	select LEDS_CLASS
+	select NEW_LEDS
+	help
+	  This module implements a driver for a wide range of different
+	  Samsung laptops.  It offers control over the different
+	  function keys, wireless LED, LCD backlight level.
+
+	  It may also provide some sysfs files described in
+	  <file:Documentation/ABI/testing/sysfs-driver-samsung-laptop>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called samsung-laptop.
+
+config SAMSUNG_Q10
+	tristate "Samsung Q10 Extras"
+	depends on ACPI
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  This driver provides support for backlight control on Samsung Q10
+	  and related laptops, including Dell Latitude X200.
+
+config ACPI_TOSHIBA
+	tristate "Toshiba Laptop Extras"
+	depends on ACPI
+	depends on ACPI_WMI
+	select LEDS_CLASS
+	select NEW_LEDS
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on INPUT
+	depends on SERIO_I8042 || SERIO_I8042 = n
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on RFKILL || RFKILL = n
+	depends on IIO
+	select INPUT_SPARSEKMAP
+	help
+	  This driver adds support for access to certain system settings
+	  on "legacy free" Toshiba laptops.  These laptops can be recognized by
+	  their lack of a BIOS setup menu and APM support.
+
+	  On these machines, all system configuration is handled through the
+	  ACPI.  This driver is required for access to controls not covered
+	  by the general ACPI drivers, such as LCD brightness, video output,
+	  etc.
+
+	  This driver differs from the non-ACPI Toshiba laptop driver (located
+	  under "Processor type and features") in several aspects.
+	  Configuration is accessed by reading and writing text files in the
+	  /proc tree instead of by program interface to /dev.  Furthermore, no
+	  power management functions are exposed, as those are handled by the
+	  general ACPI drivers.
+
+	  More information about this driver is available at
+	  <http://memebeam.org/toys/ToshibaAcpiDriver>.
+
+	  If you have a legacy free Toshiba laptop (such as the Libretto L1
+	  series), say Y.
+
+config TOSHIBA_BT_RFKILL
+	tristate "Toshiba Bluetooth RFKill switch support"
+	depends on ACPI
+	depends on RFKILL || RFKILL = n
+	help
+	  This driver adds support for Bluetooth events for the RFKill
+	  switch on modern Toshiba laptops with full ACPI support and
+	  an RFKill switch.
+
+	  This driver handles RFKill events for the TOS6205 Bluetooth,
+	  and re-enables it when the switch is set back to the 'on'
+	  position.
+
+	  If you have a modern Toshiba laptop with a Bluetooth and an
+	  RFKill switch (such as the Portege R500), say Y.
+
+config TOSHIBA_HAPS
+	tristate "Toshiba HDD Active Protection Sensor"
+	depends on ACPI
+	help
+	  This driver adds support for the built-in accelerometer
+	  found on recent Toshiba laptops equipped with HID TOS620A
+	  device.
+
+	  This driver receives ACPI notify events 0x80 when the sensor
+	  detects a sudden move or a harsh vibration, as well as an
+	  ACPI notify event 0x81 whenever the movement or vibration has
+	  been stabilized.
+
+	  Also provides sysfs entries to get/set the desired protection
+	  level and resetting the HDD protection interface.
+
+	  If you have a recent Toshiba laptop with a built-in accelerometer
+	  device, say Y.
+
+config TOSHIBA_WMI
+	tristate "Toshiba WMI Hotkeys Driver (EXPERIMENTAL)"
+	depends on ACPI_WMI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	help
+	  This driver adds hotkey monitoring support to some Toshiba models
+	  that manage the hotkeys via WMI events.
+
+	  WARNING: This driver is incomplete as it lacks a proper keymap and the
+	  *notify function only prints the ACPI event type value. Be warned that
+	  you will need to provide some information if you have a Toshiba model
+	  with WMI event hotkeys and want to help with the development of this
+	  driver.
+
+	  If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
+
+config ACPI_CMPC
+	tristate "CMPC Laptop Extras"
+	depends on ACPI && INPUT
+	depends on RFKILL || RFKILL=n
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  Support for Intel Classmate PC ACPI devices, including some
+	  keys as input device, backlight device, tablet and accelerometer
+	  devices.
+
+config COMPAL_LAPTOP
+	tristate "Compal (and others) Laptop Extras"
+	depends on ACPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on RFKILL
+	depends on HWMON
+	depends on POWER_SUPPLY
+	help
+	  This is a driver for laptops built by Compal, and some models by
+	  other brands (e.g. Dell, Toshiba).
+
+	  It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
+	  and battery charging level control.
+
+config LG_LAPTOP
+	tristate "LG Laptop Extras"
+	depends on ACPI
+	depends on ACPI_WMI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	 This driver adds support for hotkeys as well as control of keyboard
+	 backlight, battery maximum charge level and various other ACPI
+	 features.
+
+	 If you have an LG Gram laptop, say Y or M here.
+
+config PANASONIC_LAPTOP
+	tristate "Panasonic Laptop Extras"
+	depends on INPUT && ACPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select INPUT_SPARSEKMAP
+	help
+	  This driver adds support for access to backlight control and hotkeys
+	  on Panasonic Let's Note laptops.
+
+	  If you have a Panasonic Let's note laptop (such as the R1(N variant),
+	  R2, R3, R5, T2, W2 and Y2 series), say Y.
+
+config SONY_LAPTOP
+	tristate "Sony Laptop Extras"
+	depends on ACPI
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on INPUT
+	depends on RFKILL
+	help
+	  This mini-driver drives the SNC and SPIC devices present in the ACPI
+	  BIOS of the Sony Vaio laptops.
+
+	  It gives access to some extra laptop functionalities like Bluetooth,
+	  screen brightness control, Fn keys and allows powering on/off some
+	  devices.
+
+	  Read <file:Documentation/admin-guide/laptops/sony-laptop.rst> for more information.
+
+config SONYPI_COMPAT
+	bool "Sonypi compatibility"
+	depends on SONY_LAPTOP
+	help
+	  Build the sonypi driver compatibility code into the sony-laptop driver.
+
+config SYSTEM76_ACPI
+	tristate "System76 ACPI Driver"
+	depends on ACPI
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGERS
+	help
+	  This is a driver for System76 laptops running open firmware. It adds
+	  support for Fn-Fx key combinations, keyboard backlight, and airplane mode
+	  LEDs.
+
+	  If you have a System76 laptop running open firmware, say Y or M here.
+
+config TOPSTAR_LAPTOP
+	tristate "Topstar Laptop Extras"
+	depends on ACPI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	select LEDS_CLASS
+	select NEW_LEDS
+	help
+	  This driver adds support for hotkeys found on Topstar laptops.
+
+	  If you have a Topstar laptop, say Y or M here.
+
+config I2C_MULTI_INSTANTIATE
+	tristate "I2C multi instantiate pseudo device driver"
+	depends on I2C && ACPI
+	help
+	  Some ACPI-based systems list multiple i2c-devices in a single ACPI
+	  firmware-node. This driver will instantiate separate i2c-clients
+	  for each device in the firmware-node.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called i2c-multi-instantiate.
+
+config MLX_PLATFORM
+	tristate "Mellanox Technologies platform support"
+	depends on I2C
+	select REGMAP
+	help
+	  This option enables system support for the Mellanox Technologies
+	  platform. The Mellanox systems provide data center networking
+	  solutions based on Virtual Protocol Interconnect (VPI) technology
+	  enable seamless connectivity to 56/100Gb/s InfiniBand or 10/40/56GbE
+	  connection.
+
+	  If you have a Mellanox system, say Y or M here.
+
+config TOUCHSCREEN_DMI
+	bool "DMI based touchscreen configuration info"
+	depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD
+	select EFI_EMBEDDED_FIRMWARE if EFI
+	help
+	  Certain ACPI based tablets with e.g. Silead or Chipone touchscreens
+	  do not have enough data in ACPI tables for the touchscreen driver to
+	  handle the touchscreen properly, as OEMs expect the data to be baked
+	  into the tablet model specific version of the driver shipped with the
+	  the OS-image for the device. This option supplies the missing info.
+	  Enable this for x86 tablets with Silead or Chipone touchscreens.
+
+config INTEL_IMR
+	bool "Intel Isolated Memory Region support"
+	depends on X86_INTEL_QUARK && IOSF_MBI
+	help
+	  This option provides a means to manipulate Isolated Memory Regions.
+	  IMRs are a set of registers that define read and write access masks
+	  to prohibit certain system agents from accessing memory with 1 KiB
+	  granularity.
+
+	  IMRs make it possible to control read/write access to an address
+	  by hardware agents inside the SoC. Read and write masks can be
+	  defined for:
+		- eSRAM flush
+		- Dirty CPU snoop (write only)
+		- RMU access
+		- PCI Virtual Channel 0/Virtual Channel 1
+		- SMM mode
+		- Non SMM mode
+
+	  Quark contains a set of eight IMR registers and makes use of those
+	  registers during its bootup process.
+
+	  If you are running on a Galileo/Quark say Y here.
+
+config INTEL_IPS
+	tristate "Intel Intelligent Power Sharing"
+	depends on ACPI && PCI
+	help
+	  Intel Calpella platforms support dynamic power sharing between the
+	  CPU and GPU, maximizing performance in a given TDP.  This driver,
+	  along with the CPU frequency and i915 drivers, provides that
+	  functionality.  If in doubt, say Y here; it will only load on
+	  supported platforms.
+
+config INTEL_RST
+        tristate "Intel Rapid Start Technology Driver"
+	depends on ACPI
+	help
+	  This driver provides support for modifying parameters on systems
+	  equipped with Intel's Rapid Start Technology. When put in an ACPI
+	  sleep state, these devices will wake after either a configured
+	  timeout or when the system battery reaches a critical state,
+	  automatically copying memory contents to disk. On resume, the
+	  firmware will copy the memory contents back to RAM and resume the OS
+	  as usual.
+
+config INTEL_SMARTCONNECT
+        tristate "Intel Smart Connect disabling driver"
+	depends on ACPI
+	help
+	  Intel Smart Connect is a technology intended to permit devices to
+	  update state by resuming for a short period of time at regular
+	  intervals. If a user enables this functionality under Windows and
+	  then reboots into Linux, the system may remain configured to resume
+	  on suspend. In the absence of any userspace to support it, the system
+	  will then remain awake until something triggers another suspend.
+
+	  This driver checks to determine whether the device has Intel Smart
+	  Connect enabled, and if so disables it.
+
+source "drivers/platform/x86/intel_speed_select_if/Kconfig"
+
+config INTEL_TURBO_MAX_3
+	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
+	depends on X86_64 && SCHED_MC_PRIO
+	help
+	  This driver reads maximum performance ratio of each CPU and set up
+	  the scheduler priority metrics. In this way scheduler can prefer
+	  CPU with higher performance to schedule tasks.
+	  This driver is only required when the system is not using Hardware
+	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
+
+config INTEL_UNCORE_FREQ_CONTROL
+	tristate "Intel Uncore frequency control driver"
+	depends on X86_64
+	help
+	  This driver allows control of uncore frequency limits on
+	  supported server platforms.
+	  Uncore frequency controls RING/LLC (last-level cache) clocks.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-uncore-frequency.
+
+config INTEL_BXTWC_PMIC_TMU
+	tristate "Intel BXT Whiskey Cove TMU Driver"
+	depends on REGMAP
+	depends on MFD_INTEL_PMC_BXT
+	depends on INTEL_SOC_PMIC_BXTWC
+	help
+	  Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature.
+	  This driver enables the alarm wakeup functionality in the TMU unit
+	  of Whiskey Cove PMIC.
+
+config INTEL_CHTDC_TI_PWRBTN
+	tristate "Intel Cherry Trail Dollar Cove TI power button driver"
+	depends on INTEL_SOC_PMIC_CHTDC_TI
+	depends on INPUT
+	help
+	  This option adds a power button driver driver for Dollar Cove TI
+	  PMIC on Intel Cherry Trail devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_chtdc_ti_pwrbtn.
+
+config INTEL_MFLD_THERMAL
+       tristate "Thermal driver for Intel Medfield platform"
+       depends on MFD_INTEL_MSIC && THERMAL
+       help
+         Say Y here to enable thermal driver support for the  Intel Medfield
+         platform.
+
+config INTEL_MID_POWER_BUTTON
+	tristate "power button driver for Intel MID platforms"
+	depends on INTEL_SCU && INPUT
+	help
+	  This driver handles the power button on the Intel MID platforms.
+
+	  If unsure, say N.
+
+config INTEL_MRFLD_PWRBTN
+	tristate "Intel Merrifield Basin Cove power button driver"
+	depends on INTEL_SOC_PMIC_MRFLD
+	depends on INPUT
+	help
+	  This option adds a power button driver for Basin Cove PMIC
+	  on Intel Merrifield devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_mrfld_pwrbtn.
+
+config INTEL_PMC_CORE
+	tristate "Intel PMC Core driver"
+	depends on PCI
+	help
+	  The Intel Platform Controller Hub for Intel Core SoCs provides access
+	  to Power Management Controller registers via a PCI interface. This
+	  driver can utilize debugging capabilities and supported features as
+	  exposed by the Power Management Controller.
+
+	  Supported features:
+		- SLP_S0_RESIDENCY counter
+		- PCH IP Power Gating status
+		- LTR Ignore
+		- MPHY/PLL gating status (Sunrisepoint PCH only)
+
+config INTEL_PUNIT_IPC
+	tristate "Intel P-Unit IPC Driver"
+	help
+	  This driver provides support for Intel P-Unit Mailbox IPC mechanism,
+	  which is used to bridge the communications between kernel and P-Unit.
+
+config INTEL_SCU_IPC
+	bool
+
+config INTEL_SCU
+	bool
+	select INTEL_SCU_IPC
+
+config INTEL_SCU_PCI
+	bool "Intel SCU PCI driver"
+	depends on PCI
+	select INTEL_SCU
+	help
+	  This driver is used to bridge the communications between kernel
+	  and SCU on some embedded Intel x86 platforms. It also creates
+	  devices that are connected to the SoC through the SCU.
+	  Platforms supported:
+	    Medfield
+	    Clovertrail
+	    Merrifield
+	    Broxton
+	    Apollo Lake
+
+config INTEL_SCU_PLATFORM
+	tristate "Intel SCU platform driver"
+	depends on ACPI
+	select INTEL_SCU
+	help
+	  This driver is used to bridge the communications between kernel
+	  and SCU (sometimes called PMC as well). The driver currently
+	  supports Intel Elkhart Lake and compatible platforms.
+
+config INTEL_SCU_IPC_UTIL
+	tristate "Intel SCU IPC utility driver"
+	depends on INTEL_SCU
+	help
+	  The IPC Util driver provides an interface with the SCU enabling
+	  low level access for debug work and updating the firmware. Say
+	  N unless you will be doing this on an Intel MID platform.
+
+config INTEL_TELEMETRY
+	tristate "Intel SoC Telemetry Driver"
+	depends on X86_64
+	depends on MFD_INTEL_PMC_BXT
+	depends on INTEL_PUNIT_IPC
+	help
+	  This driver provides interfaces to configure and use
+	  telemetry for INTEL SoC from APL onwards. It is also
+	  used to get various SoC events and parameters
+	  directly via debugfs files. Various tools may use
+	  this interface for SoC state monitoring.
+
+endif # X86_PLATFORM_DEVICES
+
+config PMC_ATOM
+       def_bool y
+       depends on PCI
+       select COMMON_CLK