Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 544 insertions, 0 deletions

diff --git a/drivers/power/supply/ab8500_bmdata.c b/drivers/power/supply/ab8500_bmdata.c
new file mode 100644
index 000000000..f6a66979c
--- /dev/null
+++ b/drivers/power/supply/ab8500_bmdata.c
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+#include <linux/power_supply.h>
+#include <linux/of.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+
+/*
+ * These are the defined batteries that uses a NTC and ID resistor placed
+ * inside of the battery pack.
+ * Note that the res_to_temp table must be strictly sorted by falling resistance
+ * values to work.
+ */
+const struct abx500_res_to_temp ab8500_temp_tbl_a_thermistor[] = {
+	{-5, 53407},
+	{ 0, 48594},
+	{ 5, 43804},
+	{10, 39188},
+	{15, 34870},
+	{20, 30933},
+	{25, 27422},
+	{30, 24347},
+	{35, 21694},
+	{40, 19431},
+	{45, 17517},
+	{50, 15908},
+	{55, 14561},
+	{60, 13437},
+	{65, 12500},
+};
+EXPORT_SYMBOL(ab8500_temp_tbl_a_thermistor);
+
+const int ab8500_temp_tbl_a_size = ARRAY_SIZE(ab8500_temp_tbl_a_thermistor);
+EXPORT_SYMBOL(ab8500_temp_tbl_a_size);
+
+const struct abx500_res_to_temp ab8500_temp_tbl_b_thermistor[] = {
+	{-5, 200000},
+	{ 0, 159024},
+	{ 5, 151921},
+	{10, 144300},
+	{15, 136424},
+	{20, 128565},
+	{25, 120978},
+	{30, 113875},
+	{35, 107397},
+	{40, 101629},
+	{45,  96592},
+	{50,  92253},
+	{55,  88569},
+	{60,  85461},
+	{65,  82869},
+};
+EXPORT_SYMBOL(ab8500_temp_tbl_b_thermistor);
+
+const int ab8500_temp_tbl_b_size = ARRAY_SIZE(ab8500_temp_tbl_b_thermistor);
+EXPORT_SYMBOL(ab8500_temp_tbl_b_size);
+
+static const struct abx500_v_to_cap cap_tbl_a_thermistor[] = {
+	{4171,	100},
+	{4114,	 95},
+	{4009,	 83},
+	{3947,	 74},
+	{3907,	 67},
+	{3863,	 59},
+	{3830,	 56},
+	{3813,	 53},
+	{3791,	 46},
+	{3771,	 33},
+	{3754,	 25},
+	{3735,	 20},
+	{3717,	 17},
+	{3681,	 13},
+	{3664,	  8},
+	{3651,	  6},
+	{3635,	  5},
+	{3560,	  3},
+	{3408,    1},
+	{3247,	  0},
+};
+
+static const struct abx500_v_to_cap cap_tbl_b_thermistor[] = {
+	{4161,	100},
+	{4124,	 98},
+	{4044,	 90},
+	{4003,	 85},
+	{3966,	 80},
+	{3933,	 75},
+	{3888,	 67},
+	{3849,	 60},
+	{3813,	 55},
+	{3787,	 47},
+	{3772,	 30},
+	{3751,	 25},
+	{3718,	 20},
+	{3681,	 16},
+	{3660,	 14},
+	{3589,	 10},
+	{3546,	  7},
+	{3495,	  4},
+	{3404,	  2},
+	{3250,	  0},
+};
+
+static const struct abx500_v_to_cap cap_tbl[] = {
+	{4186,	100},
+	{4163,	 99},
+	{4114,	 95},
+	{4068,	 90},
+	{3990,	 80},
+	{3926,	 70},
+	{3898,	 65},
+	{3866,	 60},
+	{3833,	 55},
+	{3812,	 50},
+	{3787,	 40},
+	{3768,	 30},
+	{3747,	 25},
+	{3730,	 20},
+	{3705,	 15},
+	{3699,	 14},
+	{3684,	 12},
+	{3672,	  9},
+	{3657,	  7},
+	{3638,	  6},
+	{3556,	  4},
+	{3424,	  2},
+	{3317,	  1},
+	{3094,	  0},
+};
+
+/*
+ * Note that the res_to_temp table must be strictly sorted by falling
+ * resistance values to work.
+ */
+static const struct abx500_res_to_temp temp_tbl[] = {
+	{-5, 214834},
+	{ 0, 162943},
+	{ 5, 124820},
+	{10,  96520},
+	{15,  75306},
+	{20,  59254},
+	{25,  47000},
+	{30,  37566},
+	{35,  30245},
+	{40,  24520},
+	{45,  20010},
+	{50,  16432},
+	{55,  13576},
+	{60,  11280},
+	{65,   9425},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work.
+ */
+static const struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
+	{ 40, 120},
+	{ 30, 135},
+	{ 20, 165},
+	{ 10, 230},
+	{ 00, 325},
+	{-10, 445},
+	{-20, 595},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work.
+ */
+static const struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
+	{ 60, 300},
+	{ 30, 300},
+	{ 20, 300},
+	{ 10, 300},
+	{ 00, 300},
+	{-10, 300},
+	{-20, 300},
+};
+
+/* battery resistance table for LI ION 9100 battery */
+static const struct batres_vs_temp temp_to_batres_tbl_9100[] = {
+	{ 60, 180},
+	{ 30, 180},
+	{ 20, 180},
+	{ 10, 180},
+	{ 00, 180},
+	{-10, 180},
+	{-20, 180},
+};
+
+static struct abx500_battery_type bat_type_thermistor[] = {
+	[BATTERY_UNKNOWN] = {
+		/* First element always represent the UNKNOWN battery */
+		.name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+		.resis_high = 0,
+		.resis_low = 0,
+		.battery_resistance = 300,
+		.charge_full_design = 612,
+		.nominal_voltage = 3700,
+		.termination_vol = 4050,
+		.termination_curr = 200,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 400,
+		.normal_vol_lvl = 4100,
+		.maint_a_cur_lvl = 400,
+		.maint_a_vol_lvl = 4050,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 400,
+		.maint_b_vol_lvl = 4000,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+		.resis_high = 53407,
+		.resis_low = 12500,
+		.battery_resistance = 300,
+		.charge_full_design = 900,
+		.nominal_voltage = 3600,
+		.termination_vol = 4150,
+		.termination_curr = 80,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(ab8500_temp_tbl_a_thermistor),
+		.r_to_t_tbl = ab8500_temp_tbl_a_thermistor,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_a_thermistor),
+		.v_to_cap_tbl = cap_tbl_a_thermistor,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+
+	},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+		.resis_high = 200000,
+		.resis_low = 82869,
+		.battery_resistance = 300,
+		.charge_full_design = 900,
+		.nominal_voltage = 3600,
+		.termination_vol = 4150,
+		.termination_curr = 80,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(ab8500_temp_tbl_b_thermistor),
+		.r_to_t_tbl = ab8500_temp_tbl_b_thermistor,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_b_thermistor),
+		.v_to_cap_tbl = cap_tbl_b_thermistor,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+};
+
+static struct abx500_battery_type bat_type_ext_thermistor[] = {
+	[BATTERY_UNKNOWN] = {
+		/* First element always represent the UNKNOWN battery */
+		.name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+		.resis_high = 0,
+		.resis_low = 0,
+		.battery_resistance = 300,
+		.charge_full_design = 612,
+		.nominal_voltage = 3700,
+		.termination_vol = 4050,
+		.termination_curr = 200,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 400,
+		.normal_vol_lvl = 4100,
+		.maint_a_cur_lvl = 400,
+		.maint_a_vol_lvl = 4050,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 400,
+		.maint_b_vol_lvl = 4000,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+/*
+ * These are the batteries that doesn't have an internal NTC resistor to measure
+ * its temperature. The temperature in this case is measure with a NTC placed
+ * near the battery but on the PCB.
+ */
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+		.resis_high = 76000,
+		.resis_low = 53000,
+		.battery_resistance = 300,
+		.charge_full_design = 900,
+		.nominal_voltage = 3700,
+		.termination_vol = 4150,
+		.termination_curr = 100,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LION,
+		.resis_high = 30000,
+		.resis_low = 10000,
+		.battery_resistance = 300,
+		.charge_full_design = 950,
+		.nominal_voltage = 3700,
+		.termination_vol = 4150,
+		.termination_curr = 100,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+	{
+		.name = POWER_SUPPLY_TECHNOLOGY_LION,
+		.resis_high = 95000,
+		.resis_low = 76001,
+		.battery_resistance = 300,
+		.charge_full_design = 950,
+		.nominal_voltage = 3700,
+		.termination_vol = 4150,
+		.termination_curr = 100,
+		.recharge_cap = 95,
+		.normal_cur_lvl = 700,
+		.normal_vol_lvl = 4200,
+		.maint_a_cur_lvl = 600,
+		.maint_a_vol_lvl = 4150,
+		.maint_a_chg_timer_h = 60,
+		.maint_b_cur_lvl = 600,
+		.maint_b_vol_lvl = 4100,
+		.maint_b_chg_timer_h = 200,
+		.low_high_cur_lvl = 300,
+		.low_high_vol_lvl = 4000,
+		.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+		.r_to_t_tbl = temp_tbl,
+		.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+		.v_to_cap_tbl = cap_tbl,
+		.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+		.batres_tbl = temp_to_batres_tbl_thermistor,
+	},
+};
+
+static const struct abx500_bm_capacity_levels cap_levels = {
+	.critical	= 2,
+	.low		= 10,
+	.normal		= 70,
+	.high		= 95,
+	.full		= 100,
+};
+
+static const struct abx500_fg_parameters fg = {
+	.recovery_sleep_timer = 10,
+	.recovery_total_time = 100,
+	.init_timer = 1,
+	.init_discard_time = 5,
+	.init_total_time = 40,
+	.high_curr_time = 60,
+	.accu_charging = 30,
+	.accu_high_curr = 30,
+	.high_curr_threshold = 50,
+	.lowbat_threshold = 3100,
+	.battok_falling_th_sel0 = 2860,
+	.battok_raising_th_sel1 = 2860,
+	.maint_thres = 95,
+	.user_cap_limit = 15,
+	.pcut_enable = 1,
+	.pcut_max_time = 127,
+	.pcut_flag_time = 112,
+	.pcut_max_restart = 15,
+	.pcut_debounce_time = 2,
+};
+
+static const struct abx500_maxim_parameters ab8500_maxi_params = {
+	.ena_maxi = true,
+	.chg_curr = 910,
+	.wait_cycles = 10,
+	.charger_curr_step = 100,
+};
+
+static const struct abx500_bm_charger_parameters chg = {
+	.usb_volt_max		= 5500,
+	.usb_curr_max		= 1500,
+	.ac_volt_max		= 7500,
+	.ac_curr_max		= 1500,
+};
+
+/*
+ * This array maps the raw hex value to charger output current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_output_curr_map[] = {
+        100,    200,    300,    400,    500,    600,    700,    800,
+        900,    1000,   1100,   1200,   1300,   1400,   1500,   1500,
+};
+
+/*
+ * This array maps the raw hex value to charger input current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_input_curr_map[] = {
+        50,     98,     193,    290,    380,    450,    500,    600,
+        700,    800,    900,    1000,   1100,   1300,   1400,   1500,
+};
+
+struct abx500_bm_data ab8500_bm_data = {
+	.temp_under             = 3,
+	.temp_low               = 8,
+	.temp_high              = 43,
+	.temp_over              = 48,
+	.main_safety_tmr_h      = 4,
+	.temp_interval_chg      = 20,
+	.temp_interval_nochg    = 120,
+	.usb_safety_tmr_h       = 4,
+	.bkup_bat_v             = BUP_VCH_SEL_2P6V,
+	.bkup_bat_i             = BUP_ICH_SEL_150UA,
+	.no_maintenance         = false,
+	.capacity_scaling       = false,
+	.adc_therm              = ABx500_ADC_THERM_BATCTRL,
+	.chg_unknown_bat        = false,
+	.enable_overshoot       = false,
+	.fg_res                 = 100,
+	.cap_levels             = &cap_levels,
+	.bat_type               = bat_type_thermistor,
+	.n_btypes               = ARRAY_SIZE(bat_type_thermistor),
+	.batt_id                = 0,
+	.interval_charging      = 5,
+	.interval_not_charging  = 120,
+	.temp_hysteresis        = 3,
+	.gnd_lift_resistance    = 34,
+	.chg_output_curr        = ab8500_charge_output_curr_map,
+	.n_chg_out_curr         = ARRAY_SIZE(ab8500_charge_output_curr_map),
+	.maxi                   = &ab8500_maxi_params,
+	.chg_params             = &chg,
+	.fg_params              = &fg,
+        .chg_input_curr         = ab8500_charge_input_curr_map,
+        .n_chg_in_curr          = ARRAY_SIZE(ab8500_charge_input_curr_map),
+};
+
+int ab8500_bm_of_probe(struct device *dev,
+		       struct device_node *np,
+		       struct abx500_bm_data *bm)
+{
+	const struct batres_vs_temp *tmp_batres_tbl;
+	struct device_node *battery_node;
+	const char *btech;
+	int i;
+
+	/* get phandle to 'battery-info' node */
+	battery_node = of_parse_phandle(np, "battery", 0);
+	if (!battery_node) {
+		dev_err(dev, "battery node or reference missing\n");
+		return -EINVAL;
+	}
+
+	btech = of_get_property(battery_node, "stericsson,battery-type", NULL);
+	if (!btech) {
+		dev_warn(dev, "missing property battery-name/type\n");
+		of_node_put(battery_node);
+		return -EINVAL;
+	}
+
+	if (strncmp(btech, "LION", 4) == 0) {
+		bm->no_maintenance  = true;
+		bm->chg_unknown_bat = true;
+		bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
+		bm->bat_type[BATTERY_UNKNOWN].termination_vol    = 4150;
+		bm->bat_type[BATTERY_UNKNOWN].recharge_cap       = 95;
+		bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl     = 520;
+		bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl     = 4200;
+	}
+
+	if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) {
+		if (strncmp(btech, "LION", 4) == 0)
+			tmp_batres_tbl = temp_to_batres_tbl_9100;
+		else
+			tmp_batres_tbl = temp_to_batres_tbl_thermistor;
+	} else {
+		bm->n_btypes   = 4;
+		bm->bat_type   = bat_type_ext_thermistor;
+		bm->adc_therm  = ABx500_ADC_THERM_BATTEMP;
+		tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor;
+	}
+
+	/* select the battery resolution table */
+	for (i = 0; i < bm->n_btypes; ++i)
+		bm->bat_type[i].batres_tbl = tmp_batres_tbl;
+
+	of_node_put(battery_node);
+
+	return 0;
+}