Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 317 insertions, 0 deletions

diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
new file mode 100644
index 000000000..dcbc0489d
--- /dev/null
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/atmel-hlcdc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_PWMCVAL_MASK	GENMASK(15, 8)
+#define ATMEL_HLCDC_PWMCVAL(x)		(((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK)
+#define ATMEL_HLCDC_PWMPOL		BIT(4)
+#define ATMEL_HLCDC_PWMPS_MASK		GENMASK(2, 0)
+#define ATMEL_HLCDC_PWMPS_MAX		0x6
+#define ATMEL_HLCDC_PWMPS(x)		((x) & ATMEL_HLCDC_PWMPS_MASK)
+
+struct atmel_hlcdc_pwm_errata {
+	bool slow_clk_erratum;
+	bool div1_clk_erratum;
+};
+
+struct atmel_hlcdc_pwm {
+	struct pwm_chip chip;
+	struct atmel_hlcdc *hlcdc;
+	struct clk *cur_clk;
+	const struct atmel_hlcdc_pwm_errata *errata;
+};
+
+static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct atmel_hlcdc_pwm, chip);
+}
+
+static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
+				 const struct pwm_state *state)
+{
+	struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
+	struct atmel_hlcdc *hlcdc = chip->hlcdc;
+	unsigned int status;
+	int ret;
+
+	if (state->enabled) {
+		struct clk *new_clk = hlcdc->slow_clk;
+		u64 pwmcval = state->duty_cycle * 256;
+		unsigned long clk_freq;
+		u64 clk_period_ns;
+		u32 pwmcfg;
+		int pres;
+
+		if (!chip->errata || !chip->errata->slow_clk_erratum) {
+			clk_freq = clk_get_rate(new_clk);
+			if (!clk_freq)
+				return -EINVAL;
+
+			clk_period_ns = (u64)NSEC_PER_SEC * 256;
+			do_div(clk_period_ns, clk_freq);
+		}
+
+		/* Errata: cannot use slow clk on some IP revisions */
+		if ((chip->errata && chip->errata->slow_clk_erratum) ||
+		    clk_period_ns > state->period) {
+			new_clk = hlcdc->sys_clk;
+			clk_freq = clk_get_rate(new_clk);
+			if (!clk_freq)
+				return -EINVAL;
+
+			clk_period_ns = (u64)NSEC_PER_SEC * 256;
+			do_div(clk_period_ns, clk_freq);
+		}
+
+		for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
+		/* Errata: cannot divide by 1 on some IP revisions */
+			if (!pres && chip->errata &&
+			    chip->errata->div1_clk_erratum)
+				continue;
+
+			if ((clk_period_ns << pres) >= state->period)
+				break;
+		}
+
+		if (pres > ATMEL_HLCDC_PWMPS_MAX)
+			return -EINVAL;
+
+		pwmcfg = ATMEL_HLCDC_PWMPS(pres);
+
+		if (new_clk != chip->cur_clk) {
+			u32 gencfg = 0;
+			int ret;
+
+			ret = clk_prepare_enable(new_clk);
+			if (ret)
+				return ret;
+
+			clk_disable_unprepare(chip->cur_clk);
+			chip->cur_clk = new_clk;
+
+			if (new_clk == hlcdc->sys_clk)
+				gencfg = ATMEL_HLCDC_CLKPWMSEL;
+
+			ret = regmap_update_bits(hlcdc->regmap,
+						 ATMEL_HLCDC_CFG(0),
+						 ATMEL_HLCDC_CLKPWMSEL,
+						 gencfg);
+			if (ret)
+				return ret;
+		}
+
+		do_div(pwmcval, state->period);
+
+		/*
+		 * The PWM duty cycle is configurable from 0/256 to 255/256 of
+		 * the period cycle. Hence we can't set a duty cycle occupying
+		 * the whole period cycle if we're asked to.
+		 * Set it to 255 if pwmcval is greater than 256.
+		 */
+		if (pwmcval > 255)
+			pwmcval = 255;
+
+		pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
+
+		if (state->polarity == PWM_POLARITY_NORMAL)
+			pwmcfg |= ATMEL_HLCDC_PWMPOL;
+
+		ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
+					 ATMEL_HLCDC_PWMCVAL_MASK |
+					 ATMEL_HLCDC_PWMPS_MASK |
+					 ATMEL_HLCDC_PWMPOL,
+					 pwmcfg);
+		if (ret)
+			return ret;
+
+		ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN,
+				   ATMEL_HLCDC_PWM);
+		if (ret)
+			return ret;
+
+		ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
+					       status,
+					       status & ATMEL_HLCDC_PWM,
+					       10, 0);
+		if (ret)
+			return ret;
+	} else {
+		ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS,
+				   ATMEL_HLCDC_PWM);
+		if (ret)
+			return ret;
+
+		ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
+					       status,
+					       !(status & ATMEL_HLCDC_PWM),
+					       10, 0);
+		if (ret)
+			return ret;
+
+		clk_disable_unprepare(chip->cur_clk);
+		chip->cur_clk = NULL;
+	}
+
+	return 0;
+}
+
+static const struct pwm_ops atmel_hlcdc_pwm_ops = {
+	.apply = atmel_hlcdc_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_at91sam9x5_errata = {
+	.slow_clk_erratum = true,
+};
+
+static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
+	.div1_clk_erratum = true,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int atmel_hlcdc_pwm_suspend(struct device *dev)
+{
+	struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
+
+	/* Keep the periph clock enabled if the PWM is still running. */
+	if (pwm_is_enabled(&chip->chip.pwms[0]))
+		clk_disable_unprepare(chip->hlcdc->periph_clk);
+
+	return 0;
+}
+
+static int atmel_hlcdc_pwm_resume(struct device *dev)
+{
+	struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
+	struct pwm_state state;
+	int ret;
+
+	pwm_get_state(&chip->chip.pwms[0], &state);
+
+	/* Re-enable the periph clock it was stopped during suspend. */
+	if (!state.enabled) {
+		ret = clk_prepare_enable(chip->hlcdc->periph_clk);
+		if (ret)
+			return ret;
+	}
+
+	return atmel_hlcdc_pwm_apply(&chip->chip, &chip->chip.pwms[0], &state);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
+			 atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
+
+static const struct of_device_id atmel_hlcdc_dt_ids[] = {
+	{
+		.compatible = "atmel,at91sam9n12-hlcdc",
+		/* 9n12 has same errata as 9x5 HLCDC PWM */
+		.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
+	},
+	{
+		.compatible = "atmel,at91sam9x5-hlcdc",
+		.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
+	},
+	{
+		.compatible = "atmel,sama5d2-hlcdc",
+	},
+	{
+		.compatible = "atmel,sama5d3-hlcdc",
+		.data = &atmel_hlcdc_pwm_sama5d3_errata,
+	},
+	{
+		.compatible = "atmel,sama5d4-hlcdc",
+		.data = &atmel_hlcdc_pwm_sama5d3_errata,
+	},
+	{	.compatible = "microchip,sam9x60-hlcdc", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, atmel_hlcdc_dt_ids);
+
+static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+	struct atmel_hlcdc_pwm *chip;
+	struct atmel_hlcdc *hlcdc;
+	int ret;
+
+	hlcdc = dev_get_drvdata(dev->parent);
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	ret = clk_prepare_enable(hlcdc->periph_clk);
+	if (ret)
+		return ret;
+
+	match = of_match_node(atmel_hlcdc_dt_ids, dev->parent->of_node);
+	if (match)
+		chip->errata = match->data;
+
+	chip->hlcdc = hlcdc;
+	chip->chip.ops = &atmel_hlcdc_pwm_ops;
+	chip->chip.dev = dev;
+	chip->chip.base = -1;
+	chip->chip.npwm = 1;
+	chip->chip.of_xlate = of_pwm_xlate_with_flags;
+	chip->chip.of_pwm_n_cells = 3;
+
+	ret = pwmchip_add_with_polarity(&chip->chip, PWM_POLARITY_INVERSED);
+	if (ret) {
+		clk_disable_unprepare(hlcdc->periph_clk);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, chip);
+
+	return 0;
+}
+
+static int atmel_hlcdc_pwm_remove(struct platform_device *pdev)
+{
+	struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&chip->chip);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(chip->hlcdc->periph_clk);
+
+	return 0;
+}
+
+static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = {
+	{ .compatible = "atmel,hlcdc-pwm" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver atmel_hlcdc_pwm_driver = {
+	.driver = {
+		.name = "atmel-hlcdc-pwm",
+		.of_match_table = atmel_hlcdc_pwm_dt_ids,
+		.pm = &atmel_hlcdc_pwm_pm_ops,
+	},
+	.probe = atmel_hlcdc_pwm_probe,
+	.remove = atmel_hlcdc_pwm_remove,
+};
+module_platform_driver(atmel_hlcdc_pwm_driver);
+
+MODULE_ALIAS("platform:atmel-hlcdc-pwm");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Atmel HLCDC PWM driver");
+MODULE_LICENSE("GPL v2");