Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1436 insertions, 0 deletions

diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
new file mode 100644
index 000000000..11ef58204
--- /dev/null
+++ b/drivers/scsi/aacraid/src.c
@@ -0,0 +1,1436 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *	Adaptec AAC series RAID controller driver
+ *	(c) Copyright 2001 Red Hat Inc.
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ *               2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
+ *		 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
+ *
+ * Module Name:
+ *  src.c
+ *
+ * Abstract: Hardware Device Interface for PMC SRC based controllers
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+static int aac_src_get_sync_status(struct aac_dev *dev);
+
+static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
+{
+	struct aac_msix_ctx *ctx;
+	struct aac_dev *dev;
+	unsigned long bellbits, bellbits_shifted;
+	int vector_no;
+	int isFastResponse, mode;
+	u32 index, handle;
+
+	ctx = (struct aac_msix_ctx *)dev_id;
+	dev = ctx->dev;
+	vector_no = ctx->vector_no;
+
+	if (dev->msi_enabled) {
+		mode = AAC_INT_MODE_MSI;
+		if (vector_no == 0) {
+			bellbits = src_readl(dev, MUnit.ODR_MSI);
+			if (bellbits & 0x40000)
+				mode |= AAC_INT_MODE_AIF;
+			if (bellbits & 0x1000)
+				mode |= AAC_INT_MODE_SYNC;
+		}
+	} else {
+		mode = AAC_INT_MODE_INTX;
+		bellbits = src_readl(dev, MUnit.ODR_R);
+		if (bellbits & PmDoorBellResponseSent) {
+			bellbits = PmDoorBellResponseSent;
+			src_writel(dev, MUnit.ODR_C, bellbits);
+			src_readl(dev, MUnit.ODR_C);
+		} else {
+			bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
+			src_writel(dev, MUnit.ODR_C, bellbits);
+			src_readl(dev, MUnit.ODR_C);
+
+			if (bellbits_shifted & DoorBellAifPending)
+				mode |= AAC_INT_MODE_AIF;
+			else if (bellbits_shifted & OUTBOUNDDOORBELL_0)
+				mode |= AAC_INT_MODE_SYNC;
+		}
+	}
+
+	if (mode & AAC_INT_MODE_SYNC) {
+		unsigned long sflags;
+		struct list_head *entry;
+		int send_it = 0;
+		extern int aac_sync_mode;
+
+		if (!aac_sync_mode && !dev->msi_enabled) {
+			src_writel(dev, MUnit.ODR_C, bellbits);
+			src_readl(dev, MUnit.ODR_C);
+		}
+
+		if (dev->sync_fib) {
+			if (dev->sync_fib->callback)
+				dev->sync_fib->callback(dev->sync_fib->callback_data,
+					dev->sync_fib);
+			spin_lock_irqsave(&dev->sync_fib->event_lock, sflags);
+			if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) {
+				dev->management_fib_count--;
+				complete(&dev->sync_fib->event_wait);
+			}
+			spin_unlock_irqrestore(&dev->sync_fib->event_lock,
+						sflags);
+			spin_lock_irqsave(&dev->sync_lock, sflags);
+			if (!list_empty(&dev->sync_fib_list)) {
+				entry = dev->sync_fib_list.next;
+				dev->sync_fib = list_entry(entry,
+							   struct fib,
+							   fiblink);
+				list_del(entry);
+				send_it = 1;
+			} else {
+				dev->sync_fib = NULL;
+			}
+			spin_unlock_irqrestore(&dev->sync_lock, sflags);
+			if (send_it) {
+				aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB,
+					(u32)dev->sync_fib->hw_fib_pa,
+					0, 0, 0, 0, 0,
+					NULL, NULL, NULL, NULL, NULL);
+			}
+		}
+		if (!dev->msi_enabled)
+			mode = 0;
+
+	}
+
+	if (mode & AAC_INT_MODE_AIF) {
+		/* handle AIF */
+		if (dev->sa_firmware) {
+			u32 events = src_readl(dev, MUnit.SCR0);
+
+			aac_intr_normal(dev, events, 1, 0, NULL);
+			writel(events, &dev->IndexRegs->Mailbox[0]);
+			src_writel(dev, MUnit.IDR, 1 << 23);
+		} else {
+			if (dev->aif_thread && dev->fsa_dev)
+				aac_intr_normal(dev, 0, 2, 0, NULL);
+		}
+		if (dev->msi_enabled)
+			aac_src_access_devreg(dev, AAC_CLEAR_AIF_BIT);
+		mode = 0;
+	}
+
+	if (mode) {
+		index = dev->host_rrq_idx[vector_no];
+
+		for (;;) {
+			isFastResponse = 0;
+			/* remove toggle bit (31) */
+			handle = le32_to_cpu((dev->host_rrq[index])
+				& 0x7fffffff);
+			/* check fast response bits (30, 1) */
+			if (handle & 0x40000000)
+				isFastResponse = 1;
+			handle &= 0x0000ffff;
+			if (handle == 0)
+				break;
+			handle >>= 2;
+			if (dev->msi_enabled && dev->max_msix > 1)
+				atomic_dec(&dev->rrq_outstanding[vector_no]);
+			aac_intr_normal(dev, handle, 0, isFastResponse, NULL);
+			dev->host_rrq[index++] = 0;
+			if (index == (vector_no + 1) * dev->vector_cap)
+				index = vector_no * dev->vector_cap;
+			dev->host_rrq_idx[vector_no] = index;
+		}
+		mode = 0;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ *	aac_src_disable_interrupt	-	Disable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_src_disable_interrupt(struct aac_dev *dev)
+{
+	src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
+}
+
+/**
+ *	aac_src_enable_interrupt_message	-	Enable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_src_enable_interrupt_message(struct aac_dev *dev)
+{
+	aac_src_access_devreg(dev, AAC_ENABLE_INTERRUPT);
+}
+
+/**
+ *	src_sync_cmd	-	send a command and wait
+ *	@dev: Adapter
+ *	@command: Command to execute
+ *	@p1: first parameter
+ *	@p2: second parameter
+ *	@p3: third parameter
+ *	@p4: forth parameter
+ *	@p5: fifth parameter
+ *	@p6: sixth parameter
+ *	@status: adapter status
+ *	@r1: first return value
+ *	@r2: second return valu
+ *	@r3: third return value
+ *	@r4: forth return value
+ *
+ *	This routine will send a synchronous command to the adapter and wait
+ *	for its	completion.
+ */
+
+static int src_sync_cmd(struct aac_dev *dev, u32 command,
+	u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
+	u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
+{
+	unsigned long start;
+	unsigned long delay;
+	int ok;
+
+	/*
+	 *	Write the command into Mailbox 0
+	 */
+	writel(command, &dev->IndexRegs->Mailbox[0]);
+	/*
+	 *	Write the parameters into Mailboxes 1 - 6
+	 */
+	writel(p1, &dev->IndexRegs->Mailbox[1]);
+	writel(p2, &dev->IndexRegs->Mailbox[2]);
+	writel(p3, &dev->IndexRegs->Mailbox[3]);
+	writel(p4, &dev->IndexRegs->Mailbox[4]);
+
+	/*
+	 *	Clear the synch command doorbell to start on a clean slate.
+	 */
+	if (!dev->msi_enabled)
+		src_writel(dev,
+			   MUnit.ODR_C,
+			   OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+
+	/*
+	 *	Disable doorbell interrupts
+	 */
+	src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
+
+	/*
+	 *	Force the completion of the mask register write before issuing
+	 *	the interrupt.
+	 */
+	src_readl(dev, MUnit.OIMR);
+
+	/*
+	 *	Signal that there is a new synch command
+	 */
+	src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
+
+	if ((!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) &&
+		!dev->in_soft_reset) {
+		ok = 0;
+		start = jiffies;
+
+		if (command == IOP_RESET_ALWAYS) {
+			/* Wait up to 10 sec */
+			delay = 10*HZ;
+		} else {
+			/* Wait up to 5 minutes */
+			delay = 300*HZ;
+		}
+		while (time_before(jiffies, start+delay)) {
+			udelay(5);	/* Delay 5 microseconds to let Mon960 get info. */
+			/*
+			 *	Mon960 will set doorbell0 bit when it has completed the command.
+			 */
+			if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
+				/*
+				 *	Clear the doorbell.
+				 */
+				if (dev->msi_enabled)
+					aac_src_access_devreg(dev,
+						AAC_CLEAR_SYNC_BIT);
+				else
+					src_writel(dev,
+						MUnit.ODR_C,
+						OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+				ok = 1;
+				break;
+			}
+			/*
+			 *	Yield the processor in case we are slow
+			 */
+			msleep(1);
+		}
+		if (unlikely(ok != 1)) {
+			/*
+			 *	Restore interrupt mask even though we timed out
+			 */
+			aac_adapter_enable_int(dev);
+			return -ETIMEDOUT;
+		}
+		/*
+		 *	Pull the synch status from Mailbox 0.
+		 */
+		if (status)
+			*status = readl(&dev->IndexRegs->Mailbox[0]);
+		if (r1)
+			*r1 = readl(&dev->IndexRegs->Mailbox[1]);
+		if (r2)
+			*r2 = readl(&dev->IndexRegs->Mailbox[2]);
+		if (r3)
+			*r3 = readl(&dev->IndexRegs->Mailbox[3]);
+		if (r4)
+			*r4 = readl(&dev->IndexRegs->Mailbox[4]);
+		if (command == GET_COMM_PREFERRED_SETTINGS)
+			dev->max_msix =
+				readl(&dev->IndexRegs->Mailbox[5]) & 0xFFFF;
+		/*
+		 *	Clear the synch command doorbell.
+		 */
+		if (!dev->msi_enabled)
+			src_writel(dev,
+				MUnit.ODR_C,
+				OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+	}
+
+	/*
+	 *	Restore interrupt mask
+	 */
+	aac_adapter_enable_int(dev);
+	return 0;
+}
+
+/**
+ *	aac_src_interrupt_adapter	-	interrupt adapter
+ *	@dev: Adapter
+ *
+ *	Send an interrupt to the i960 and breakpoint it.
+ */
+
+static void aac_src_interrupt_adapter(struct aac_dev *dev)
+{
+	src_sync_cmd(dev, BREAKPOINT_REQUEST,
+		0, 0, 0, 0, 0, 0,
+		NULL, NULL, NULL, NULL, NULL);
+}
+
+/**
+ *	aac_src_notify_adapter		-	send an event to the adapter
+ *	@dev: Adapter
+ *	@event: Event to send
+ *
+ *	Notify the i960 that something it probably cares about has
+ *	happened.
+ */
+
+static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
+{
+	switch (event) {
+
+	case AdapNormCmdQue:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
+		break;
+	case HostNormRespNotFull:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
+		break;
+	case AdapNormRespQue:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
+		break;
+	case HostNormCmdNotFull:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
+		break;
+	case FastIo:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
+		break;
+	case AdapPrintfDone:
+		src_writel(dev, MUnit.ODR_C,
+			INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
+		break;
+	default:
+		BUG();
+		break;
+	}
+}
+
+/**
+ *	aac_src_start_adapter		-	activate adapter
+ *	@dev:	Adapter
+ *
+ *	Start up processing on an i960 based AAC adapter
+ */
+
+static void aac_src_start_adapter(struct aac_dev *dev)
+{
+	union aac_init *init;
+	int i;
+
+	 /* reset host_rrq_idx first */
+	for (i = 0; i < dev->max_msix; i++) {
+		dev->host_rrq_idx[i] = i * dev->vector_cap;
+		atomic_set(&dev->rrq_outstanding[i], 0);
+	}
+	atomic_set(&dev->msix_counter, 0);
+	dev->fibs_pushed_no = 0;
+
+	init = dev->init;
+	if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) {
+		init->r8.host_elapsed_seconds =
+			cpu_to_le32(ktime_get_real_seconds());
+		src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
+			lower_32_bits(dev->init_pa),
+			upper_32_bits(dev->init_pa),
+			sizeof(struct _r8) +
+			(AAC_MAX_HRRQ - 1) * sizeof(struct _rrq),
+			0, 0, 0, NULL, NULL, NULL, NULL, NULL);
+	} else {
+		init->r7.host_elapsed_seconds =
+			cpu_to_le32(ktime_get_real_seconds());
+		// We can only use a 32 bit address here
+		src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
+			(u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0,
+			NULL, NULL, NULL, NULL, NULL);
+	}
+
+}
+
+/**
+ *	aac_src_check_health
+ *	@dev: device to check if healthy
+ *
+ *	Will attempt to determine if the specified adapter is alive and
+ *	capable of handling requests, returning 0 if alive.
+ */
+static int aac_src_check_health(struct aac_dev *dev)
+{
+	u32 status = src_readl(dev, MUnit.OMR);
+
+	/*
+	 *	Check to see if the board panic'd.
+	 */
+	if (unlikely(status & KERNEL_PANIC))
+		goto err_blink;
+
+	/*
+	 *	Check to see if the board failed any self tests.
+	 */
+	if (unlikely(status & SELF_TEST_FAILED))
+		goto err_out;
+
+	/*
+	 *	Check to see if the board failed any self tests.
+	 */
+	if (unlikely(status & MONITOR_PANIC))
+		goto err_out;
+
+	/*
+	 *	Wait for the adapter to be up and running.
+	 */
+	if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
+		return -3;
+	/*
+	 *	Everything is OK
+	 */
+	return 0;
+
+err_out:
+	return -1;
+
+err_blink:
+	return (status >> 16) & 0xFF;
+}
+
+static inline u32 aac_get_vector(struct aac_dev *dev)
+{
+	return atomic_inc_return(&dev->msix_counter)%dev->max_msix;
+}
+
+/**
+ *	aac_src_deliver_message
+ *	@fib: fib to issue
+ *
+ *	Will send a fib, returning 0 if successful.
+ */
+static int aac_src_deliver_message(struct fib *fib)
+{
+	struct aac_dev *dev = fib->dev;
+	struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
+	u32 fibsize;
+	dma_addr_t address;
+	struct aac_fib_xporthdr *pFibX;
+	int native_hba;
+#if !defined(writeq)
+	unsigned long flags;
+#endif
+
+	u16 vector_no;
+
+	atomic_inc(&q->numpending);
+
+	native_hba = (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA) ? 1 : 0;
+
+
+	if (dev->msi_enabled && dev->max_msix > 1 &&
+		(native_hba || fib->hw_fib_va->header.Command != AifRequest)) {
+
+		if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)
+			&& dev->sa_firmware)
+			vector_no = aac_get_vector(dev);
+		else
+			vector_no = fib->vector_no;
+
+		if (native_hba) {
+			if (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF) {
+				struct aac_hba_tm_req *tm_req;
+
+				tm_req = (struct aac_hba_tm_req *)
+						fib->hw_fib_va;
+				if (tm_req->iu_type ==
+					HBA_IU_TYPE_SCSI_TM_REQ) {
+					((struct aac_hba_tm_req *)
+						fib->hw_fib_va)->reply_qid
+							= vector_no;
+					((struct aac_hba_tm_req *)
+						fib->hw_fib_va)->request_id
+							+= (vector_no << 16);
+				} else {
+					((struct aac_hba_reset_req *)
+						fib->hw_fib_va)->reply_qid
+							= vector_no;
+					((struct aac_hba_reset_req *)
+						fib->hw_fib_va)->request_id
+							+= (vector_no << 16);
+				}
+			} else {
+				((struct aac_hba_cmd_req *)
+					fib->hw_fib_va)->reply_qid
+						= vector_no;
+				((struct aac_hba_cmd_req *)
+					fib->hw_fib_va)->request_id
+						+= (vector_no << 16);
+			}
+		} else {
+			fib->hw_fib_va->header.Handle += (vector_no << 16);
+		}
+	} else {
+		vector_no = 0;
+	}
+
+	atomic_inc(&dev->rrq_outstanding[vector_no]);
+
+	if (native_hba) {
+		address = fib->hw_fib_pa;
+		fibsize = (fib->hbacmd_size + 127) / 128 - 1;
+		if (fibsize > 31)
+			fibsize = 31;
+		address |= fibsize;
+#if defined(writeq)
+		src_writeq(dev, MUnit.IQN_L, (u64)address);
+#else
+		spin_lock_irqsave(&fib->dev->iq_lock, flags);
+		src_writel(dev, MUnit.IQN_H,
+			upper_32_bits(address) & 0xffffffff);
+		src_writel(dev, MUnit.IQN_L, address & 0xffffffff);
+		spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
+#endif
+	} else {
+		if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 ||
+			dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) {
+			/* Calculate the amount to the fibsize bits */
+			fibsize = (le16_to_cpu(fib->hw_fib_va->header.Size)
+				+ 127) / 128 - 1;
+			/* New FIB header, 32-bit */
+			address = fib->hw_fib_pa;
+			fib->hw_fib_va->header.StructType = FIB_MAGIC2;
+			fib->hw_fib_va->header.SenderFibAddress =
+				cpu_to_le32((u32)address);
+			fib->hw_fib_va->header.u.TimeStamp = 0;
+			WARN_ON(upper_32_bits(address) != 0L);
+		} else {
+			/* Calculate the amount to the fibsize bits */
+			fibsize = (sizeof(struct aac_fib_xporthdr) +
+				le16_to_cpu(fib->hw_fib_va->header.Size)
+				+ 127) / 128 - 1;
+			/* Fill XPORT header */
+			pFibX = (struct aac_fib_xporthdr *)
+				((unsigned char *)fib->hw_fib_va -
+				sizeof(struct aac_fib_xporthdr));
+			pFibX->Handle = fib->hw_fib_va->header.Handle;
+			pFibX->HostAddress =
+				cpu_to_le64((u64)fib->hw_fib_pa);
+			pFibX->Size = cpu_to_le32(
+				le16_to_cpu(fib->hw_fib_va->header.Size));
+			address = fib->hw_fib_pa -
+				(u64)sizeof(struct aac_fib_xporthdr);
+		}
+		if (fibsize > 31)
+			fibsize = 31;
+		address |= fibsize;
+
+#if defined(writeq)
+		src_writeq(dev, MUnit.IQ_L, (u64)address);
+#else
+		spin_lock_irqsave(&fib->dev->iq_lock, flags);
+		src_writel(dev, MUnit.IQ_H,
+			upper_32_bits(address) & 0xffffffff);
+		src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
+		spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
+#endif
+	}
+	return 0;
+}
+
+/**
+ *	aac_src_ioremap
+ *	@dev: device ioremap
+ *	@size: mapping resize request
+ *
+ */
+static int aac_src_ioremap(struct aac_dev *dev, u32 size)
+{
+	if (!size) {
+		iounmap(dev->regs.src.bar1);
+		dev->regs.src.bar1 = NULL;
+		iounmap(dev->regs.src.bar0);
+		dev->base = dev->regs.src.bar0 = NULL;
+		return 0;
+	}
+	dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
+		AAC_MIN_SRC_BAR1_SIZE);
+	dev->base = NULL;
+	if (dev->regs.src.bar1 == NULL)
+		return -1;
+	dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
+	if (dev->base == NULL) {
+		iounmap(dev->regs.src.bar1);
+		dev->regs.src.bar1 = NULL;
+		return -1;
+	}
+	dev->IndexRegs = &((struct src_registers __iomem *)
+		dev->base)->u.tupelo.IndexRegs;
+	return 0;
+}
+
+/**
+ *  aac_srcv_ioremap
+ *	@dev: device ioremap
+ *	@size: mapping resize request
+ *
+ */
+static int aac_srcv_ioremap(struct aac_dev *dev, u32 size)
+{
+	if (!size) {
+		iounmap(dev->regs.src.bar0);
+		dev->base = dev->regs.src.bar0 = NULL;
+		return 0;
+	}
+
+	dev->regs.src.bar1 =
+	ioremap(pci_resource_start(dev->pdev, 2), AAC_MIN_SRCV_BAR1_SIZE);
+	dev->base = NULL;
+	if (dev->regs.src.bar1 == NULL)
+		return -1;
+	dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
+	if (dev->base == NULL) {
+		iounmap(dev->regs.src.bar1);
+		dev->regs.src.bar1 = NULL;
+		return -1;
+	}
+	dev->IndexRegs = &((struct src_registers __iomem *)
+		dev->base)->u.denali.IndexRegs;
+	return 0;
+}
+
+void aac_set_intx_mode(struct aac_dev *dev)
+{
+	if (dev->msi_enabled) {
+		aac_src_access_devreg(dev, AAC_ENABLE_INTX);
+		dev->msi_enabled = 0;
+		msleep(5000); /* Delay 5 seconds */
+	}
+}
+
+static void aac_clear_omr(struct aac_dev *dev)
+{
+	u32 omr_value = 0;
+
+	omr_value = src_readl(dev, MUnit.OMR);
+
+	/*
+	 * Check for PCI Errors or Kernel Panic
+	 */
+	if ((omr_value == INVALID_OMR) || (omr_value & KERNEL_PANIC))
+		omr_value = 0;
+
+	/*
+	 * Preserve MSIX Value if any
+	 */
+	src_writel(dev, MUnit.OMR, omr_value & AAC_INT_MODE_MSIX);
+	src_readl(dev, MUnit.OMR);
+}
+
+static void aac_dump_fw_fib_iop_reset(struct aac_dev *dev)
+{
+	__le32 supported_options3;
+
+	if (!aac_fib_dump)
+		return;
+
+	supported_options3  = dev->supplement_adapter_info.supported_options3;
+	if (!(supported_options3 & AAC_OPTION_SUPPORTED3_IOP_RESET_FIB_DUMP))
+		return;
+
+	aac_adapter_sync_cmd(dev, IOP_RESET_FW_FIB_DUMP,
+			0, 0, 0,  0, 0, 0, NULL, NULL, NULL, NULL, NULL);
+}
+
+static bool aac_is_ctrl_up_and_running(struct aac_dev *dev)
+{
+	bool ctrl_up = true;
+	unsigned long status, start;
+	bool is_up = false;
+
+	start = jiffies;
+	do {
+		schedule();
+		status = src_readl(dev, MUnit.OMR);
+
+		if (status == 0xffffffff)
+			status = 0;
+
+		if (status & KERNEL_BOOTING) {
+			start = jiffies;
+			continue;
+		}
+
+		if (time_after(jiffies, start+HZ*SOFT_RESET_TIME)) {
+			ctrl_up = false;
+			break;
+		}
+
+		is_up = status & KERNEL_UP_AND_RUNNING;
+
+	} while (!is_up);
+
+	return ctrl_up;
+}
+
+static void aac_src_drop_io(struct aac_dev *dev)
+{
+	if (!dev->soft_reset_support)
+		return;
+
+	aac_adapter_sync_cmd(dev, DROP_IO,
+			0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
+}
+
+static void aac_notify_fw_of_iop_reset(struct aac_dev *dev)
+{
+	aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, 0, 0, 0, 0, 0, 0, NULL,
+						NULL, NULL, NULL, NULL);
+	aac_src_drop_io(dev);
+}
+
+static void aac_send_iop_reset(struct aac_dev *dev)
+{
+	aac_dump_fw_fib_iop_reset(dev);
+
+	aac_notify_fw_of_iop_reset(dev);
+
+	aac_set_intx_mode(dev);
+
+	aac_clear_omr(dev);
+
+	src_writel(dev, MUnit.IDR, IOP_SRC_RESET_MASK);
+
+	msleep(5000);
+}
+
+static void aac_send_hardware_soft_reset(struct aac_dev *dev)
+{
+	u_int32_t val;
+
+	aac_clear_omr(dev);
+	val = readl(((char *)(dev->base) + IBW_SWR_OFFSET));
+	val |= 0x01;
+	writel(val, ((char *)(dev->base) + IBW_SWR_OFFSET));
+	msleep_interruptible(20000);
+}
+
+static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
+{
+	bool is_ctrl_up;
+	int ret = 0;
+
+	if (bled < 0)
+		goto invalid_out;
+
+	if (bled)
+		dev_err(&dev->pdev->dev, "adapter kernel panic'd %x.\n", bled);
+
+	/*
+	 * When there is a BlinkLED, IOP_RESET has not effect
+	 */
+	if (bled >= 2 && dev->sa_firmware && reset_type & HW_IOP_RESET)
+		reset_type &= ~HW_IOP_RESET;
+
+	dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
+
+	dev_err(&dev->pdev->dev, "Controller reset type is %d\n", reset_type);
+
+	if (reset_type & HW_IOP_RESET) {
+		dev_info(&dev->pdev->dev, "Issuing IOP reset\n");
+		aac_send_iop_reset(dev);
+
+		/*
+		 * Creates a delay or wait till up and running comes thru
+		 */
+		is_ctrl_up = aac_is_ctrl_up_and_running(dev);
+		if (!is_ctrl_up)
+			dev_err(&dev->pdev->dev, "IOP reset failed\n");
+		else {
+			dev_info(&dev->pdev->dev, "IOP reset succeeded\n");
+			goto set_startup;
+		}
+	}
+
+	if (!dev->sa_firmware) {
+		dev_err(&dev->pdev->dev, "ARC Reset attempt failed\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (reset_type & HW_SOFT_RESET) {
+		dev_info(&dev->pdev->dev, "Issuing SOFT reset\n");
+		aac_send_hardware_soft_reset(dev);
+		dev->msi_enabled = 0;
+
+		is_ctrl_up = aac_is_ctrl_up_and_running(dev);
+		if (!is_ctrl_up) {
+			dev_err(&dev->pdev->dev, "SOFT reset failed\n");
+			ret = -ENODEV;
+			goto out;
+		} else
+			dev_info(&dev->pdev->dev, "SOFT reset succeeded\n");
+	}
+
+set_startup:
+	if (startup_timeout < 300)
+		startup_timeout = 300;
+
+out:
+	return ret;
+
+invalid_out:
+	if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
+		ret = -ENODEV;
+goto out;
+}
+
+/**
+ *	aac_src_select_comm	-	Select communications method
+ *	@dev: Adapter
+ *	@comm: communications method
+ */
+static int aac_src_select_comm(struct aac_dev *dev, int comm)
+{
+	switch (comm) {
+	case AAC_COMM_MESSAGE:
+		dev->a_ops.adapter_intr = aac_src_intr_message;
+		dev->a_ops.adapter_deliver = aac_src_deliver_message;
+		break;
+	default:
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ *  aac_src_init	-	initialize an Cardinal Frey Bar card
+ *  @dev: device to configure
+ *
+ */
+
+int aac_src_init(struct aac_dev *dev)
+{
+	unsigned long start;
+	unsigned long status;
+	int restart = 0;
+	int instance = dev->id;
+	const char *name = dev->name;
+
+	dev->a_ops.adapter_ioremap = aac_src_ioremap;
+	dev->a_ops.adapter_comm = aac_src_select_comm;
+
+	dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
+	if (aac_adapter_ioremap(dev, dev->base_size)) {
+		printk(KERN_WARNING "%s: unable to map adapter.\n", name);
+		goto error_iounmap;
+	}
+
+	/* Failure to reset here is an option ... */
+	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
+	dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
+
+	if (dev->init_reset) {
+		dev->init_reset = false;
+		if (!aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET))
+			++restart;
+	}
+
+	/*
+	 *	Check to see if the board panic'd while booting.
+	 */
+	status = src_readl(dev, MUnit.OMR);
+	if (status & KERNEL_PANIC) {
+		if (aac_src_restart_adapter(dev,
+			aac_src_check_health(dev), IOP_HWSOFT_RESET))
+			goto error_iounmap;
+		++restart;
+	}
+	/*
+	 *	Check to see if the board failed any self tests.
+	 */
+	status = src_readl(dev, MUnit.OMR);
+	if (status & SELF_TEST_FAILED) {
+		printk(KERN_ERR "%s%d: adapter self-test failed.\n",
+			dev->name, instance);
+		goto error_iounmap;
+	}
+	/*
+	 *	Check to see if the monitor panic'd while booting.
+	 */
+	if (status & MONITOR_PANIC) {
+		printk(KERN_ERR "%s%d: adapter monitor panic.\n",
+			dev->name, instance);
+		goto error_iounmap;
+	}
+	start = jiffies;
+	/*
+	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
+	 */
+	while (!((status = src_readl(dev, MUnit.OMR)) &
+		KERNEL_UP_AND_RUNNING)) {
+		if ((restart &&
+		  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
+		  time_after(jiffies, start+HZ*startup_timeout)) {
+			printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
+					dev->name, instance, status);
+			goto error_iounmap;
+		}
+		if (!restart &&
+		  ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
+		  time_after(jiffies, start + HZ *
+		  ((startup_timeout > 60)
+		    ? (startup_timeout - 60)
+		    : (startup_timeout / 2))))) {
+			if (likely(!aac_src_restart_adapter(dev,
+				aac_src_check_health(dev), IOP_HWSOFT_RESET)))
+				start = jiffies;
+			++restart;
+		}
+		msleep(1);
+	}
+	if (restart && aac_commit)
+		aac_commit = 1;
+	/*
+	 *	Fill in the common function dispatch table.
+	 */
+	dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
+	dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
+	dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
+	dev->a_ops.adapter_notify = aac_src_notify_adapter;
+	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
+	dev->a_ops.adapter_check_health = aac_src_check_health;
+	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
+
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	aac_adapter_comm(dev, AAC_COMM_MESSAGE);
+	aac_adapter_disable_int(dev);
+	src_writel(dev, MUnit.ODR_C, 0xffffffff);
+	aac_adapter_enable_int(dev);
+
+	if (aac_init_adapter(dev) == NULL)
+		goto error_iounmap;
+	if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
+		goto error_iounmap;
+
+	dev->msi = !pci_enable_msi(dev->pdev);
+
+	dev->aac_msix[0].vector_no = 0;
+	dev->aac_msix[0].dev = dev;
+
+	if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid", &(dev->aac_msix[0]))  < 0) {
+
+		if (dev->msi)
+			pci_disable_msi(dev->pdev);
+
+		printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+			name, instance);
+		goto error_iounmap;
+	}
+	dev->dbg_base = pci_resource_start(dev->pdev, 2);
+	dev->dbg_base_mapped = dev->regs.src.bar1;
+	dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
+	dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
+
+	aac_adapter_enable_int(dev);
+
+	if (!dev->sync_mode) {
+		/*
+		 * Tell the adapter that all is configured, and it can
+		 * start accepting requests
+		 */
+		aac_src_start_adapter(dev);
+	}
+	return 0;
+
+error_iounmap:
+
+	return -1;
+}
+
+static int aac_src_wait_sync(struct aac_dev *dev, int *status)
+{
+	unsigned long start = jiffies;
+	unsigned long usecs = 0;
+	int delay = 5 * HZ;
+	int rc = 1;
+
+	while (time_before(jiffies, start+delay)) {
+		/*
+		 * Delay 5 microseconds to let Mon960 get info.
+		 */
+		udelay(5);
+
+		/*
+		 * Mon960 will set doorbell0 bit when it has completed the
+		 * command.
+		 */
+		if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
+			/*
+			 * Clear: the doorbell.
+			 */
+			if (dev->msi_enabled)
+				aac_src_access_devreg(dev, AAC_CLEAR_SYNC_BIT);
+			else
+				src_writel(dev, MUnit.ODR_C,
+					OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
+			rc = 0;
+
+			break;
+		}
+
+		/*
+		 * Yield the processor in case we are slow
+		 */
+		usecs = 1 * USEC_PER_MSEC;
+		usleep_range(usecs, usecs + 50);
+	}
+	/*
+	 * Pull the synch status from Mailbox 0.
+	 */
+	if (status && !rc) {
+		status[0] = readl(&dev->IndexRegs->Mailbox[0]);
+		status[1] = readl(&dev->IndexRegs->Mailbox[1]);
+		status[2] = readl(&dev->IndexRegs->Mailbox[2]);
+		status[3] = readl(&dev->IndexRegs->Mailbox[3]);
+		status[4] = readl(&dev->IndexRegs->Mailbox[4]);
+	}
+
+	return rc;
+}
+
+/**
+ *  aac_src_soft_reset	-	perform soft reset to speed up
+ *  access
+ *
+ *  Assumptions: That the controller is in a state where we can
+ *  bring it back to life with an init struct. We can only use
+ *  fast sync commands, as the timeout is 5 seconds.
+ *
+ *  @dev: device to configure
+ *
+ */
+
+static int aac_src_soft_reset(struct aac_dev *dev)
+{
+	u32 status_omr = src_readl(dev, MUnit.OMR);
+	u32 status[5];
+	int rc = 1;
+	int state = 0;
+	char *state_str[7] = {
+		"GET_ADAPTER_PROPERTIES Failed",
+		"GET_ADAPTER_PROPERTIES timeout",
+		"SOFT_RESET not supported",
+		"DROP_IO Failed",
+		"DROP_IO timeout",
+		"Check Health failed"
+	};
+
+	if (status_omr == INVALID_OMR)
+		return 1;       // pcie hosed
+
+	if (!(status_omr & KERNEL_UP_AND_RUNNING))
+		return 1;       // not up and running
+
+	/*
+	 * We go into soft reset mode to allow us to handle response
+	 */
+	dev->in_soft_reset = 1;
+	dev->msi_enabled = status_omr & AAC_INT_MODE_MSIX;
+
+	/* Get adapter properties */
+	rc = aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, 0, 0, 0,
+		0, 0, 0, status+0, status+1, status+2, status+3, status+4);
+	if (rc)
+		goto out;
+
+	state++;
+	if (aac_src_wait_sync(dev, status)) {
+		rc = 1;
+		goto out;
+	}
+
+	state++;
+	if (!(status[1] & le32_to_cpu(AAC_OPT_EXTENDED) &&
+		(status[4] & le32_to_cpu(AAC_EXTOPT_SOFT_RESET)))) {
+		rc = 2;
+		goto out;
+	}
+
+	if ((status[1] & le32_to_cpu(AAC_OPT_EXTENDED)) &&
+		(status[4] & le32_to_cpu(AAC_EXTOPT_SA_FIRMWARE)))
+		dev->sa_firmware = 1;
+
+	state++;
+	rc = aac_adapter_sync_cmd(dev, DROP_IO, 0, 0, 0, 0, 0, 0,
+		 status+0, status+1, status+2, status+3, status+4);
+
+	if (rc)
+		goto out;
+
+	state++;
+	if (aac_src_wait_sync(dev, status)) {
+		rc = 3;
+		goto out;
+	}
+
+	if (status[1])
+		dev_err(&dev->pdev->dev, "%s: %d outstanding I/O pending\n",
+			__func__, status[1]);
+
+	state++;
+	rc = aac_src_check_health(dev);
+
+out:
+	dev->in_soft_reset = 0;
+	dev->msi_enabled = 0;
+	if (rc)
+		dev_err(&dev->pdev->dev, "%s: %s status = %d", __func__,
+			state_str[state], rc);
+
+	return rc;
+}
+/**
+ *  aac_srcv_init	-	initialize an SRCv card
+ *  @dev: device to configure
+ *
+ */
+
+int aac_srcv_init(struct aac_dev *dev)
+{
+	unsigned long start;
+	unsigned long status;
+	int restart = 0;
+	int instance = dev->id;
+	const char *name = dev->name;
+
+	dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
+	dev->a_ops.adapter_comm = aac_src_select_comm;
+
+	dev->base_size = AAC_MIN_SRCV_BAR0_SIZE;
+	if (aac_adapter_ioremap(dev, dev->base_size)) {
+		printk(KERN_WARNING "%s: unable to map adapter.\n", name);
+		goto error_iounmap;
+	}
+
+	/* Failure to reset here is an option ... */
+	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
+	dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
+
+	if (dev->init_reset) {
+		dev->init_reset = false;
+		if (aac_src_soft_reset(dev)) {
+			aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET);
+			++restart;
+		}
+	}
+
+	/*
+	 *	Check to see if flash update is running.
+	 *	Wait for the adapter to be up and running. Wait up to 5 minutes
+	 */
+	status = src_readl(dev, MUnit.OMR);
+	if (status & FLASH_UPD_PENDING) {
+		start = jiffies;
+		do {
+			status = src_readl(dev, MUnit.OMR);
+			if (time_after(jiffies, start+HZ*FWUPD_TIMEOUT)) {
+				printk(KERN_ERR "%s%d: adapter flash update failed.\n",
+					dev->name, instance);
+				goto error_iounmap;
+			}
+		} while (!(status & FLASH_UPD_SUCCESS) &&
+			 !(status & FLASH_UPD_FAILED));
+		/* Delay 10 seconds.
+		 * Because right now FW is doing a soft reset,
+		 * do not read scratch pad register at this time
+		 */
+		ssleep(10);
+	}
+	/*
+	 *	Check to see if the board panic'd while booting.
+	 */
+	status = src_readl(dev, MUnit.OMR);
+	if (status & KERNEL_PANIC) {
+		if (aac_src_restart_adapter(dev,
+			aac_src_check_health(dev), IOP_HWSOFT_RESET))
+			goto error_iounmap;
+		++restart;
+	}
+	/*
+	 *	Check to see if the board failed any self tests.
+	 */
+	status = src_readl(dev, MUnit.OMR);
+	if (status & SELF_TEST_FAILED) {
+		printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
+		goto error_iounmap;
+	}
+	/*
+	 *	Check to see if the monitor panic'd while booting.
+	 */
+	if (status & MONITOR_PANIC) {
+		printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
+		goto error_iounmap;
+	}
+
+	start = jiffies;
+	/*
+	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
+	 */
+	do {
+		status = src_readl(dev, MUnit.OMR);
+		if (status == INVALID_OMR)
+			status = 0;
+
+		if ((restart &&
+		  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
+		  time_after(jiffies, start+HZ*startup_timeout)) {
+			printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
+					dev->name, instance, status);
+			goto error_iounmap;
+		}
+		if (!restart &&
+		  ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
+		  time_after(jiffies, start + HZ *
+		  ((startup_timeout > 60)
+		    ? (startup_timeout - 60)
+		    : (startup_timeout / 2))))) {
+			if (likely(!aac_src_restart_adapter(dev,
+				aac_src_check_health(dev), IOP_HWSOFT_RESET)))
+				start = jiffies;
+			++restart;
+		}
+		msleep(1);
+	} while (!(status & KERNEL_UP_AND_RUNNING));
+
+	if (restart && aac_commit)
+		aac_commit = 1;
+	/*
+	 *	Fill in the common function dispatch table.
+	 */
+	dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
+	dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
+	dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
+	dev->a_ops.adapter_notify = aac_src_notify_adapter;
+	dev->a_ops.adapter_sync_cmd = src_sync_cmd;
+	dev->a_ops.adapter_check_health = aac_src_check_health;
+	dev->a_ops.adapter_restart = aac_src_restart_adapter;
+	dev->a_ops.adapter_start = aac_src_start_adapter;
+
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	aac_adapter_comm(dev, AAC_COMM_MESSAGE);
+	aac_adapter_disable_int(dev);
+	src_writel(dev, MUnit.ODR_C, 0xffffffff);
+	aac_adapter_enable_int(dev);
+
+	if (aac_init_adapter(dev) == NULL)
+		goto error_iounmap;
+	if ((dev->comm_interface != AAC_COMM_MESSAGE_TYPE2) &&
+		(dev->comm_interface != AAC_COMM_MESSAGE_TYPE3))
+		goto error_iounmap;
+	if (dev->msi_enabled)
+		aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
+
+	if (aac_acquire_irq(dev))
+		goto error_iounmap;
+
+	dev->dbg_base = pci_resource_start(dev->pdev, 2);
+	dev->dbg_base_mapped = dev->regs.src.bar1;
+	dev->dbg_size = AAC_MIN_SRCV_BAR1_SIZE;
+	dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
+
+	aac_adapter_enable_int(dev);
+
+	if (!dev->sync_mode) {
+		/*
+		 * Tell the adapter that all is configured, and it can
+		 * start accepting requests
+		 */
+		aac_src_start_adapter(dev);
+	}
+	return 0;
+
+error_iounmap:
+
+	return -1;
+}
+
+void aac_src_access_devreg(struct aac_dev *dev, int mode)
+{
+	u_int32_t val;
+
+	switch (mode) {
+	case AAC_ENABLE_INTERRUPT:
+		src_writel(dev,
+			   MUnit.OIMR,
+			   dev->OIMR = (dev->msi_enabled ?
+					AAC_INT_ENABLE_TYPE1_MSIX :
+					AAC_INT_ENABLE_TYPE1_INTX));
+		break;
+
+	case AAC_DISABLE_INTERRUPT:
+		src_writel(dev,
+			   MUnit.OIMR,
+			   dev->OIMR = AAC_INT_DISABLE_ALL);
+		break;
+
+	case AAC_ENABLE_MSIX:
+		/* set bit 6 */
+		val = src_readl(dev, MUnit.IDR);
+		val |= 0x40;
+		src_writel(dev,  MUnit.IDR, val);
+		src_readl(dev, MUnit.IDR);
+		/* unmask int. */
+		val = PMC_ALL_INTERRUPT_BITS;
+		src_writel(dev, MUnit.IOAR, val);
+		val = src_readl(dev, MUnit.OIMR);
+		src_writel(dev,
+			   MUnit.OIMR,
+			   val & (~(PMC_GLOBAL_INT_BIT2 | PMC_GLOBAL_INT_BIT0)));
+		break;
+
+	case AAC_DISABLE_MSIX:
+		/* reset bit 6 */
+		val = src_readl(dev, MUnit.IDR);
+		val &= ~0x40;
+		src_writel(dev, MUnit.IDR, val);
+		src_readl(dev, MUnit.IDR);
+		break;
+
+	case AAC_CLEAR_AIF_BIT:
+		/* set bit 5 */
+		val = src_readl(dev, MUnit.IDR);
+		val |= 0x20;
+		src_writel(dev, MUnit.IDR, val);
+		src_readl(dev, MUnit.IDR);
+		break;
+
+	case AAC_CLEAR_SYNC_BIT:
+		/* set bit 4 */
+		val = src_readl(dev, MUnit.IDR);
+		val |= 0x10;
+		src_writel(dev, MUnit.IDR, val);
+		src_readl(dev, MUnit.IDR);
+		break;
+
+	case AAC_ENABLE_INTX:
+		/* set bit 7 */
+		val = src_readl(dev, MUnit.IDR);
+		val |= 0x80;
+		src_writel(dev, MUnit.IDR, val);
+		src_readl(dev, MUnit.IDR);
+		/* unmask int. */
+		val = PMC_ALL_INTERRUPT_BITS;
+		src_writel(dev, MUnit.IOAR, val);
+		src_readl(dev, MUnit.IOAR);
+		val = src_readl(dev, MUnit.OIMR);
+		src_writel(dev, MUnit.OIMR,
+				val & (~(PMC_GLOBAL_INT_BIT2)));
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int aac_src_get_sync_status(struct aac_dev *dev)
+{
+	int msix_val = 0;
+	int legacy_val = 0;
+
+	msix_val = src_readl(dev, MUnit.ODR_MSI) & SRC_MSI_READ_MASK ? 1 : 0;
+
+	if (!dev->msi_enabled) {
+		/*
+		 * if Legacy int status indicates cmd is not complete
+		 * sample MSIx register to see if it indiactes cmd complete,
+		 * if yes set the controller in MSIx mode and consider cmd
+		 * completed
+		 */
+		legacy_val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
+		if (!(legacy_val & 1) && msix_val)
+			dev->msi_enabled = 1;
+		return legacy_val;
+	}
+
+	return msix_val;
+}