Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 2405 insertions, 0 deletions

diff --git a/drivers/soc/bcm/brcmstb/Kconfig b/drivers/soc/bcm/brcmstb/Kconfig
new file mode 100644
index 000000000..38e476905
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+if SOC_BRCMSTB
+
+config BRCMSTB_PM
+	bool "Support suspend/resume for STB platforms"
+	default y
+	depends on PM
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
+	select ARM_CPU_SUSPEND if ARM
+
+endif # SOC_BRCMSTB
diff --git a/drivers/soc/bcm/brcmstb/Makefile b/drivers/soc/bcm/brcmstb/Makefile
new file mode 100644
index 000000000..fe5c43d26
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y				+= common.o biuctrl.o
+obj-$(CONFIG_BRCMSTB_PM)	+= pm/
diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
new file mode 100644
index 000000000..7f8dc302a
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Broadcom STB SoCs Bus Unit Interface controls
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ */
+
+#define pr_fmt(fmt)	"brcmstb: " KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+
+#define RACENPREF_MASK			0x3
+#define RACPREFINST_SHIFT		0
+#define RACENINST_SHIFT			2
+#define RACPREFDATA_SHIFT		4
+#define RACENDATA_SHIFT			6
+#define RAC_CPU_SHIFT			8
+#define RACCFG_MASK			0xff
+#define DPREF_LINE_2_SHIFT		24
+#define DPREF_LINE_2_MASK		0xff
+
+/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */
+#define RAC_DATA_INST_EN_MASK		(1 << RACPREFINST_SHIFT | \
+					 RACENPREF_MASK << RACENINST_SHIFT | \
+					 1 << RACPREFDATA_SHIFT | \
+					 RACENPREF_MASK << RACENDATA_SHIFT)
+
+#define  CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK	0x70000000
+#define CPU_CREDIT_REG_MCPx_READ_CRED_MASK	0xf
+#define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK	0xf
+#define CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(x)	((x) * 8)
+#define CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(x)	(((x) * 8) + 4)
+
+#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(x)	((x) * 8)
+#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK		0xff
+
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK	0xf
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK		0xf
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT	4
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE		BIT(8)
+
+static void __iomem *cpubiuctrl_base;
+static bool mcp_wr_pairing_en;
+static const int *cpubiuctrl_regs;
+
+enum cpubiuctrl_regs {
+	CPU_CREDIT_REG = 0,
+	CPU_MCP_FLOW_REG,
+	CPU_WRITEBACK_CTRL_REG,
+	RAC_CONFIG0_REG,
+	RAC_CONFIG1_REG,
+	NUM_CPU_BIUCTRL_REGS,
+};
+
+static inline u32 cbc_readl(int reg)
+{
+	int offset = cpubiuctrl_regs[reg];
+
+	if (offset == -1 ||
+	    (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
+		return (u32)-1;
+
+	return readl_relaxed(cpubiuctrl_base + offset);
+}
+
+static inline void cbc_writel(u32 val, int reg)
+{
+	int offset = cpubiuctrl_regs[reg];
+
+	if (offset == -1 ||
+	    (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
+		return;
+
+	writel(val, cpubiuctrl_base + offset);
+}
+
+static const int b15_cpubiuctrl_regs[] = {
+	[CPU_CREDIT_REG] = 0x184,
+	[CPU_MCP_FLOW_REG] = -1,
+	[CPU_WRITEBACK_CTRL_REG] = -1,
+	[RAC_CONFIG0_REG] = -1,
+	[RAC_CONFIG1_REG] = -1,
+};
+
+/* Odd cases, e.g: 7260A0 */
+static const int b53_cpubiuctrl_no_wb_regs[] = {
+	[CPU_CREDIT_REG] = 0x0b0,
+	[CPU_MCP_FLOW_REG] = 0x0b4,
+	[CPU_WRITEBACK_CTRL_REG] = -1,
+	[RAC_CONFIG0_REG] = 0x78,
+	[RAC_CONFIG1_REG] = 0x7c,
+};
+
+static const int b53_cpubiuctrl_regs[] = {
+	[CPU_CREDIT_REG] = 0x0b0,
+	[CPU_MCP_FLOW_REG] = 0x0b4,
+	[CPU_WRITEBACK_CTRL_REG] = 0x22c,
+	[RAC_CONFIG0_REG] = 0x78,
+	[RAC_CONFIG1_REG] = 0x7c,
+};
+
+static const int a72_cpubiuctrl_regs[] = {
+	[CPU_CREDIT_REG] = 0x18,
+	[CPU_MCP_FLOW_REG] = 0x1c,
+	[CPU_WRITEBACK_CTRL_REG] = 0x20,
+	[RAC_CONFIG0_REG] = 0x08,
+	[RAC_CONFIG1_REG] = 0x0c,
+};
+
+static int __init mcp_write_pairing_set(void)
+{
+	u32 creds = 0;
+
+	if (!cpubiuctrl_base)
+		return -1;
+
+	creds = cbc_readl(CPU_CREDIT_REG);
+	if (mcp_wr_pairing_en) {
+		pr_info("MCP: Enabling write pairing\n");
+		cbc_writel(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+			   CPU_CREDIT_REG);
+	} else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) {
+		pr_info("MCP: Disabling write pairing\n");
+		cbc_writel(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+			   CPU_CREDIT_REG);
+	} else {
+		pr_info("MCP: Write pairing already disabled\n");
+	}
+
+	return 0;
+}
+
+static const u32 a72_b53_mach_compat[] = {
+	0x7211,
+	0x7216,
+	0x72164,
+	0x72165,
+	0x7255,
+	0x7260,
+	0x7268,
+	0x7271,
+	0x7278,
+};
+
+/* The read-ahead cache present in the Brahma-B53 CPU is a special piece of
+ * hardware after the integrated L2 cache of the B53 CPU complex whose purpose
+ * is to prefetch instruction and/or data with a line size of either 64 bytes
+ * or 256 bytes. The rationale is that the data-bus of the CPU interface is
+ * optimized for 256-byte transactions, and enabling the read-ahead cache
+ * provides a significant performance boost (typically twice the performance
+ * for a memcpy benchmark application).
+ *
+ * The read-ahead cache is transparent for Virtual Address cache maintenance
+ * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC.  So no special
+ * handling is needed for the DMA API above and beyond what is included in the
+ * arm64 implementation.
+ *
+ * In addition, since the Point of Unification is typically between L1 and L2
+ * for the Brahma-B53 processor no special read-ahead cache handling is needed
+ * for the IC IALLU and IC IALLUIS cache maintenance operations.
+ *
+ * However, it is not possible to specify the cache level (L3) for the cache
+ * maintenance instructions operating by set/way to operate on the read-ahead
+ * cache.  The read-ahead cache will maintain coherency when inner cache lines
+ * are cleaned by set/way, but if it is necessary to invalidate inner cache
+ * lines by set/way to maintain coherency with system masters operating on
+ * shared memory that does not have hardware support for coherency, then it
+ * will also be necessary to explicitly invalidate the read-ahead cache.
+ */
+static void __init a72_b53_rac_enable_all(struct device_node *np)
+{
+	unsigned int cpu;
+	u32 enable = 0, pref_dist, shift;
+
+	if (IS_ENABLED(CONFIG_CACHE_B15_RAC))
+		return;
+
+	if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n"))
+		return;
+
+	pref_dist = cbc_readl(RAC_CONFIG1_REG);
+	for_each_possible_cpu(cpu) {
+		shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT;
+		enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT);
+		if (cpubiuctrl_regs == a72_cpubiuctrl_regs) {
+			enable &= ~(RACENPREF_MASK << shift);
+			enable |= 3 << shift;
+			pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT);
+		}
+	}
+
+	cbc_writel(enable, RAC_CONFIG0_REG);
+	cbc_writel(pref_dist, RAC_CONFIG1_REG);
+
+	pr_info("%pOF: Broadcom %s read-ahead cache\n",
+		np, cpubiuctrl_regs == a72_cpubiuctrl_regs ?
+		"Cortex-A72" : "Brahma-B53");
+}
+
+static void __init mcp_a72_b53_set(void)
+{
+	unsigned int i;
+	u32 reg;
+
+	reg = brcmstb_get_family_id();
+
+	for (i = 0; i < ARRAY_SIZE(a72_b53_mach_compat); i++) {
+		if (BRCM_ID(reg) == a72_b53_mach_compat[i])
+			break;
+	}
+
+	if (i == ARRAY_SIZE(a72_b53_mach_compat))
+		return;
+
+	/* Set all 3 MCP interfaces to 8 credits */
+	reg = cbc_readl(CPU_CREDIT_REG);
+	for (i = 0; i < 3; i++) {
+		reg &= ~(CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK <<
+			 CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i));
+		reg &= ~(CPU_CREDIT_REG_MCPx_READ_CRED_MASK <<
+			 CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i));
+		reg |= 8 << CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i);
+		reg |= 8 << CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i);
+	}
+	cbc_writel(reg, CPU_CREDIT_REG);
+
+	/* Max out the number of in-flight Jwords reads on the MCP interface */
+	reg = cbc_readl(CPU_MCP_FLOW_REG);
+	for (i = 0; i < 3; i++)
+		reg |= CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK <<
+			CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(i);
+	cbc_writel(reg, CPU_MCP_FLOW_REG);
+
+	/* Enable writeback throttling, set timeout to 128 cycles, 256 cycles
+	 * threshold
+	 */
+	reg = cbc_readl(CPU_WRITEBACK_CTRL_REG);
+	reg |= CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE;
+	reg &= ~CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK;
+	reg &= ~(CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK <<
+		 CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT);
+	reg |= 8;
+	reg |= 7 << CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT;
+	cbc_writel(reg, CPU_WRITEBACK_CTRL_REG);
+}
+
+static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
+{
+	struct device_node *cpu_dn;
+	u32 family_id;
+	int ret = 0;
+
+	cpubiuctrl_base = of_iomap(np, 0);
+	if (!cpubiuctrl_base) {
+		pr_err("failed to remap BIU control base\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");
+
+	cpu_dn = of_get_cpu_node(0, NULL);
+	if (!cpu_dn) {
+		pr_err("failed to obtain CPU device node\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15"))
+		cpubiuctrl_regs = b15_cpubiuctrl_regs;
+	else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53"))
+		cpubiuctrl_regs = b53_cpubiuctrl_regs;
+	else if (of_device_is_compatible(cpu_dn, "arm,cortex-a72"))
+		cpubiuctrl_regs = a72_cpubiuctrl_regs;
+	else {
+		pr_err("unsupported CPU\n");
+		ret = -EINVAL;
+	}
+	of_node_put(cpu_dn);
+
+	family_id = brcmstb_get_family_id();
+	if (BRCM_ID(family_id) == 0x7260 && BRCM_REV(family_id) == 0)
+		cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs;
+out:
+	of_node_put(np);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static u32 cpubiuctrl_reg_save[NUM_CPU_BIUCTRL_REGS];
+
+static int brcmstb_cpu_credit_reg_suspend(void)
+{
+	unsigned int i;
+
+	if (!cpubiuctrl_base)
+		return 0;
+
+	for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++)
+		cpubiuctrl_reg_save[i] = cbc_readl(i);
+
+	return 0;
+}
+
+static void brcmstb_cpu_credit_reg_resume(void)
+{
+	unsigned int i;
+
+	if (!cpubiuctrl_base)
+		return;
+
+	for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++)
+		cbc_writel(cpubiuctrl_reg_save[i], i);
+}
+
+static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
+	.suspend = brcmstb_cpu_credit_reg_suspend,
+	.resume = brcmstb_cpu_credit_reg_resume,
+};
+#endif
+
+
+static int __init brcmstb_biuctrl_init(void)
+{
+	struct device_node *np;
+	int ret;
+
+	/* We might be running on a multi-platform kernel, don't make this a
+	 * fatal error, just bail out early
+	 */
+	np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+	if (!np)
+		return 0;
+
+	ret = setup_hifcpubiuctrl_regs(np);
+	if (ret)
+		return ret;
+
+	ret = mcp_write_pairing_set();
+	if (ret) {
+		pr_err("MCP: Unable to disable write pairing!\n");
+		return ret;
+	}
+
+	a72_b53_rac_enable_all(np);
+	mcp_a72_b53_set();
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
+#endif
+	return 0;
+}
+early_initcall(brcmstb_biuctrl_init);
diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
new file mode 100644
index 000000000..d33a38370
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/common.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+#include <linux/sys_soc.h>
+
+#include <soc/brcmstb/common.h>
+
+static u32 family_id;
+static u32 product_id;
+
+static const struct of_device_id brcmstb_machine_match[] = {
+	{ .compatible = "brcm,brcmstb", },
+	{ }
+};
+
+bool soc_is_brcmstb(void)
+{
+	const struct of_device_id *match;
+	struct device_node *root;
+
+	root = of_find_node_by_path("/");
+	if (!root)
+		return false;
+
+	match = of_match_node(brcmstb_machine_match, root);
+	of_node_put(root);
+
+	return match != NULL;
+}
+
+u32 brcmstb_get_family_id(void)
+{
+	return family_id;
+}
+EXPORT_SYMBOL(brcmstb_get_family_id);
+
+u32 brcmstb_get_product_id(void)
+{
+	return product_id;
+}
+EXPORT_SYMBOL(brcmstb_get_product_id);
+
+static const struct of_device_id sun_top_ctrl_match[] = {
+	{ .compatible = "brcm,bcm7125-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7346-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7358-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7360-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7362-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7420-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7425-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7429-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7435-sun-top-ctrl", },
+	{ .compatible = "brcm,brcmstb-sun-top-ctrl", },
+	{ }
+};
+
+static int __init brcmstb_soc_device_early_init(void)
+{
+	struct device_node *sun_top_ctrl;
+	void __iomem *sun_top_ctrl_base;
+	int ret = 0;
+
+	/* We could be on a multi-platform kernel, don't make this fatal but
+	 * bail out early
+	 */
+	sun_top_ctrl = of_find_matching_node(NULL, sun_top_ctrl_match);
+	if (!sun_top_ctrl)
+		return ret;
+
+	sun_top_ctrl_base = of_iomap(sun_top_ctrl, 0);
+	if (!sun_top_ctrl_base) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	family_id = readl(sun_top_ctrl_base);
+	product_id = readl(sun_top_ctrl_base + 0x4);
+	iounmap(sun_top_ctrl_base);
+out:
+	of_node_put(sun_top_ctrl);
+	return ret;
+}
+early_initcall(brcmstb_soc_device_early_init);
+
+static int __init brcmstb_soc_device_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct device_node *sun_top_ctrl;
+	struct soc_device *soc_dev;
+	int ret = 0;
+
+	/* We could be on a multi-platform kernel, don't make this fatal but
+	 * bail out early
+	 */
+	sun_top_ctrl = of_find_matching_node(NULL, sun_top_ctrl_match);
+	if (!sun_top_ctrl)
+		return ret;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	soc_dev_attr->family = kasprintf(GFP_KERNEL, "%x",
+					 family_id >> 28 ?
+					 family_id >> 16 : family_id >> 8);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%x",
+					 product_id >> 28 ?
+					 product_id >> 16 : product_id >> 8);
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c%d",
+					 ((product_id & 0xf0) >> 4) + 'A',
+					   product_id & 0xf);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
+		kfree(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr);
+		ret = -ENOMEM;
+	}
+out:
+	of_node_put(sun_top_ctrl);
+	return ret;
+}
+arch_initcall(brcmstb_soc_device_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/Makefile b/drivers/soc/bcm/brcmstb/pm/Makefile
new file mode 100644
index 000000000..8e10abb14
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ARM)		+= s2-arm.o pm-arm.o
+AFLAGS_s2-arm.o			:= -march=armv7-a
+obj-$(CONFIG_BMIPS_GENERIC)	+= s2-mips.o s3-mips.o pm-mips.o
diff --git a/drivers/soc/bcm/brcmstb/pm/aon_defs.h b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
new file mode 100644
index 000000000..f695262ac
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Always ON (AON) register interface between bootloader and Linux
+ *
+ * Copyright © 2014-2017 Broadcom
+ */
+
+#ifndef __BRCMSTB_AON_DEFS_H__
+#define __BRCMSTB_AON_DEFS_H__
+
+#include <linux/compiler.h>
+
+/* Magic number in upper 16-bits */
+#define BRCMSTB_S3_MAGIC_MASK                   0xffff0000
+#define BRCMSTB_S3_MAGIC_SHORT                  0x5AFE0000
+
+enum {
+	/* Restore random key for AES memory verification (off = fixed key) */
+	S3_FLAG_LOAD_RANDKEY		= (1 << 0),
+
+	/* Scratch buffer page table is present */
+	S3_FLAG_SCRATCH_BUFFER_TABLE	= (1 << 1),
+
+	/* Skip all memory verification */
+	S3_FLAG_NO_MEM_VERIFY		= (1 << 2),
+
+	/*
+	 * Modification of this bit reserved for bootloader only.
+	 * 1=PSCI started Linux, 0=Direct jump to Linux.
+	 */
+	S3_FLAG_PSCI_BOOT		= (1 << 3),
+
+	/*
+	 * Modification of this bit reserved for bootloader only.
+	 * 1=64 bit boot, 0=32 bit boot.
+	 */
+	S3_FLAG_BOOTED64		= (1 << 4),
+};
+
+#define BRCMSTB_HASH_LEN			(128 / 8) /* 128-bit hash */
+
+#define AON_REG_MAGIC_FLAGS			0x00
+#define AON_REG_CONTROL_LOW			0x04
+#define AON_REG_CONTROL_HIGH			0x08
+#define AON_REG_S3_HASH				0x0c /* hash of S3 params */
+#define AON_REG_CONTROL_HASH_LEN		0x1c
+#define AON_REG_PANIC				0x20
+
+#define BRCMSTB_S3_MAGIC		0x5AFEB007
+#define BRCMSTB_PANIC_MAGIC		0x512E115E
+#define BOOTLOADER_SCRATCH_SIZE		64
+#define BRCMSTB_DTU_STATE_MAP_ENTRIES	(8*1024)
+#define BRCMSTB_DTU_CONFIG_ENTRIES	(512)
+#define BRCMSTB_DTU_COUNT		(2)
+
+#define IMAGE_DESCRIPTORS_BUFSIZE	(2 * 1024)
+#define S3_BOOTLOADER_RESERVED		(S3_FLAG_PSCI_BOOT | S3_FLAG_BOOTED64)
+
+struct brcmstb_bootloader_dtu_table {
+	uint32_t	dtu_state_map[BRCMSTB_DTU_STATE_MAP_ENTRIES];
+	uint32_t	dtu_config[BRCMSTB_DTU_CONFIG_ENTRIES];
+};
+
+/*
+ * Bootloader utilizes a custom parameter block left in DRAM for handling S3
+ * warm resume
+ */
+struct brcmstb_s3_params {
+	/* scratch memory for bootloader */
+	uint8_t scratch[BOOTLOADER_SCRATCH_SIZE];
+
+	uint32_t magic; /* BRCMSTB_S3_MAGIC */
+	uint64_t reentry; /* PA */
+
+	/* descriptors */
+	uint32_t hash[BRCMSTB_HASH_LEN / 4];
+
+	/*
+	 * If 0, then ignore this parameter (there is only one set of
+	 *   descriptors)
+	 *
+	 * If non-0, then a second set of descriptors is stored at:
+	 *
+	 *   descriptors + desc_offset_2
+	 *
+	 * The MAC result of both descriptors is XOR'd and stored in @hash
+	 */
+	uint32_t desc_offset_2;
+
+	/*
+	 * (Physical) address of a brcmstb_bootloader_scratch_table, for
+	 * providing a large DRAM buffer to the bootloader
+	 */
+	uint64_t buffer_table;
+
+	uint32_t spare[70];
+
+	uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE];
+	/*
+	 * Must be last member of struct. See brcmstb_pm_s3_finish() for reason.
+	 */
+	struct brcmstb_bootloader_dtu_table dtu[BRCMSTB_DTU_COUNT];
+} __packed;
+
+#endif /* __BRCMSTB_AON_DEFS_H__ */
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
new file mode 100644
index 000000000..722fd54e5
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -0,0 +1,859 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARM-specific support for Broadcom STB S2/S3/S5 power management
+ *
+ * S2: clock gate CPUs and as many peripherals as possible
+ * S3: power off all of the chip except the Always ON (AON) island; keep DDR is
+ *     self-refresh
+ * S5: (a.k.a. S3 cold boot) much like S3, except DDR is powered down, so we
+ *     treat this mode like a soft power-off, with wakeup allowed from AON
+ *
+ * Copyright © 2014-2017 Broadcom
+ */
+
+#define pr_fmt(fmt) "brcmstb-pm: " fmt
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kconfig.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/printk.h>
+#include <linux/proc_fs.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/suspend.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+
+#include <asm/fncpy.h>
+#include <asm/setup.h>
+#include <asm/suspend.h>
+
+#include "pm.h"
+#include "aon_defs.h"
+
+#define SHIMPHY_DDR_PAD_CNTRL		0x8c
+
+/* Method #0 */
+#define SHIMPHY_PAD_PLL_SEQUENCE	BIT(8)
+#define SHIMPHY_PAD_GATE_PLL_S3		BIT(9)
+
+/* Method #1 */
+#define PWRDWN_SEQ_NO_SEQUENCING	0
+#define PWRDWN_SEQ_HOLD_CHANNEL		1
+#define	PWRDWN_SEQ_RESET_PLL		2
+#define PWRDWN_SEQ_POWERDOWN_PLL	3
+
+#define SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK	0x00f00000
+#define SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT	20
+
+#define	DDR_FORCE_CKE_RST_N		BIT(3)
+#define	DDR_PHY_RST_N			BIT(2)
+#define	DDR_PHY_CKE			BIT(1)
+
+#define	DDR_PHY_NO_CHANNEL		0xffffffff
+
+#define MAX_NUM_MEMC			3
+
+struct brcmstb_memc {
+	void __iomem *ddr_phy_base;
+	void __iomem *ddr_shimphy_base;
+	void __iomem *ddr_ctrl;
+};
+
+struct brcmstb_pm_control {
+	void __iomem *aon_ctrl_base;
+	void __iomem *aon_sram;
+	struct brcmstb_memc memcs[MAX_NUM_MEMC];
+
+	void __iomem *boot_sram;
+	size_t boot_sram_len;
+
+	bool support_warm_boot;
+	size_t pll_status_offset;
+	int num_memc;
+
+	struct brcmstb_s3_params *s3_params;
+	dma_addr_t s3_params_pa;
+	int s3entry_method;
+	u32 warm_boot_offset;
+	u32 phy_a_standby_ctrl_offs;
+	u32 phy_b_standby_ctrl_offs;
+	bool needs_ddr_pad;
+	struct platform_device *pdev;
+};
+
+enum bsp_initiate_command {
+	BSP_CLOCK_STOP		= 0x00,
+	BSP_GEN_RANDOM_KEY	= 0x4A,
+	BSP_RESTORE_RANDOM_KEY	= 0x55,
+	BSP_GEN_FIXED_KEY	= 0x63,
+};
+
+#define PM_INITIATE		0x01
+#define PM_INITIATE_SUCCESS	0x00
+#define PM_INITIATE_FAIL	0xfe
+
+static struct brcmstb_pm_control ctrl;
+
+static int (*brcmstb_pm_do_s2_sram)(void __iomem *aon_ctrl_base,
+		void __iomem *ddr_phy_pll_status);
+
+static int brcmstb_init_sram(struct device_node *dn)
+{
+	void __iomem *sram;
+	struct resource res;
+	int ret;
+
+	ret = of_address_to_resource(dn, 0, &res);
+	if (ret)
+		return ret;
+
+	/* Uncached, executable remapping of SRAM */
+	sram = __arm_ioremap_exec(res.start, resource_size(&res), false);
+	if (!sram)
+		return -ENOMEM;
+
+	ctrl.boot_sram = sram;
+	ctrl.boot_sram_len = resource_size(&res);
+
+	return 0;
+}
+
+static const struct of_device_id sram_dt_ids[] = {
+	{ .compatible = "mmio-sram" },
+	{ /* sentinel */ }
+};
+
+static int do_bsp_initiate_command(enum bsp_initiate_command cmd)
+{
+	void __iomem *base = ctrl.aon_ctrl_base;
+	int ret;
+	int timeo = 1000 * 1000; /* 1 second */
+
+	writel_relaxed(0, base + AON_CTRL_PM_INITIATE);
+	(void)readl_relaxed(base + AON_CTRL_PM_INITIATE);
+
+	/* Go! */
+	writel_relaxed((cmd << 1) | PM_INITIATE, base + AON_CTRL_PM_INITIATE);
+
+	/*
+	 * If firmware doesn't support the 'ack', then just assume it's done
+	 * after 10ms. Note that this only works for command 0, BSP_CLOCK_STOP
+	 */
+	if (of_machine_is_compatible("brcm,bcm74371a0")) {
+		(void)readl_relaxed(base + AON_CTRL_PM_INITIATE);
+		mdelay(10);
+		return 0;
+	}
+
+	for (;;) {
+		ret = readl_relaxed(base + AON_CTRL_PM_INITIATE);
+		if (!(ret & PM_INITIATE))
+			break;
+		if (timeo <= 0) {
+			pr_err("error: timeout waiting for BSP (%x)\n", ret);
+			break;
+		}
+		timeo -= 50;
+		udelay(50);
+	}
+
+	return (ret & 0xff) != PM_INITIATE_SUCCESS;
+}
+
+static int brcmstb_pm_handshake(void)
+{
+	void __iomem *base = ctrl.aon_ctrl_base;
+	u32 tmp;
+	int ret;
+
+	/* BSP power handshake, v1 */
+	tmp = readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS);
+	tmp &= ~1UL;
+	writel_relaxed(tmp, base + AON_CTRL_HOST_MISC_CMDS);
+	(void)readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS);
+
+	ret = do_bsp_initiate_command(BSP_CLOCK_STOP);
+	if (ret)
+		pr_err("BSP handshake failed\n");
+
+	/*
+	 * HACK: BSP may have internal race on the CLOCK_STOP command.
+	 * Avoid touching the BSP for a few milliseconds.
+	 */
+	mdelay(3);
+
+	return ret;
+}
+
+static inline void shimphy_set(u32 value, u32 mask)
+{
+	int i;
+
+	if (!ctrl.needs_ddr_pad)
+		return;
+
+	for (i = 0; i < ctrl.num_memc; i++) {
+		u32 tmp;
+
+		tmp = readl_relaxed(ctrl.memcs[i].ddr_shimphy_base +
+			SHIMPHY_DDR_PAD_CNTRL);
+		tmp = value | (tmp & mask);
+		writel_relaxed(tmp, ctrl.memcs[i].ddr_shimphy_base +
+			SHIMPHY_DDR_PAD_CNTRL);
+	}
+	wmb(); /* Complete sequence in order. */
+}
+
+static inline void ddr_ctrl_set(bool warmboot)
+{
+	int i;
+
+	for (i = 0; i < ctrl.num_memc; i++) {
+		u32 tmp;
+
+		tmp = readl_relaxed(ctrl.memcs[i].ddr_ctrl +
+				ctrl.warm_boot_offset);
+		if (warmboot)
+			tmp |= 1;
+		else
+			tmp &= ~1; /* Cold boot */
+		writel_relaxed(tmp, ctrl.memcs[i].ddr_ctrl +
+				ctrl.warm_boot_offset);
+	}
+	/* Complete sequence in order */
+	wmb();
+}
+
+static inline void s3entry_method0(void)
+{
+	shimphy_set(SHIMPHY_PAD_GATE_PLL_S3 | SHIMPHY_PAD_PLL_SEQUENCE,
+		    0xffffffff);
+}
+
+static inline void s3entry_method1(void)
+{
+	/*
+	 * S3 Entry Sequence
+	 * -----------------
+	 * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3
+	 * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 1
+	 */
+	shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+		    SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+		    ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+
+	ddr_ctrl_set(true);
+}
+
+static inline void s5entry_method1(void)
+{
+	int i;
+
+	/*
+	 * S5 Entry Sequence
+	 * -----------------
+	 * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3
+	 * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 0
+	 * Step 3: DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ CKE ] = 0
+	 *	   DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ RST_N ] = 0
+	 */
+	shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+		    SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+		    ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+
+	ddr_ctrl_set(false);
+
+	for (i = 0; i < ctrl.num_memc; i++) {
+		u32 tmp;
+
+		/* Step 3: Channel A (RST_N = CKE = 0) */
+		tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base +
+				  ctrl.phy_a_standby_ctrl_offs);
+		tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N);
+		writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base +
+			     ctrl.phy_a_standby_ctrl_offs);
+
+		/* Step 3: Channel B? */
+		if (ctrl.phy_b_standby_ctrl_offs != DDR_PHY_NO_CHANNEL) {
+			tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base +
+					  ctrl.phy_b_standby_ctrl_offs);
+			tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N);
+			writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base +
+				     ctrl.phy_b_standby_ctrl_offs);
+		}
+	}
+	/* Must complete */
+	wmb();
+}
+
+/*
+ * Run a Power Management State Machine (PMSM) shutdown command and put the CPU
+ * into a low-power mode
+ */
+static void brcmstb_do_pmsm_power_down(unsigned long base_cmd, bool onewrite)
+{
+	void __iomem *base = ctrl.aon_ctrl_base;
+
+	if ((ctrl.s3entry_method == 1) && (base_cmd == PM_COLD_CONFIG))
+		s5entry_method1();
+
+	/* pm_start_pwrdn transition 0->1 */
+	writel_relaxed(base_cmd, base + AON_CTRL_PM_CTRL);
+
+	if (!onewrite) {
+		(void)readl_relaxed(base + AON_CTRL_PM_CTRL);
+
+		writel_relaxed(base_cmd | PM_PWR_DOWN, base + AON_CTRL_PM_CTRL);
+		(void)readl_relaxed(base + AON_CTRL_PM_CTRL);
+	}
+	wfi();
+}
+
+/* Support S5 cold boot out of "poweroff" */
+static void brcmstb_pm_poweroff(void)
+{
+	brcmstb_pm_handshake();
+
+	/* Clear magic S3 warm-boot value */
+	writel_relaxed(0, ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+	(void)readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+
+	/* Skip wait-for-interrupt signal; just use a countdown */
+	writel_relaxed(0x10, ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT);
+	(void)readl_relaxed(ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT);
+
+	if (ctrl.s3entry_method == 1) {
+		shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+			     SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+			     ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+		ddr_ctrl_set(false);
+		brcmstb_do_pmsm_power_down(M1_PM_COLD_CONFIG, true);
+		return; /* We should never actually get here */
+	}
+
+	brcmstb_do_pmsm_power_down(PM_COLD_CONFIG, false);
+}
+
+static void *brcmstb_pm_copy_to_sram(void *fn, size_t len)
+{
+	unsigned int size = ALIGN(len, FNCPY_ALIGN);
+
+	if (ctrl.boot_sram_len < size) {
+		pr_err("standby code will not fit in SRAM\n");
+		return NULL;
+	}
+
+	return fncpy(ctrl.boot_sram, fn, size);
+}
+
+/*
+ * S2 suspend/resume picks up where we left off, so we must execute carefully
+ * from SRAM, in order to allow DDR to come back up safely before we continue.
+ */
+static int brcmstb_pm_s2(void)
+{
+	/* A previous S3 can set a value hazardous to S2, so make sure. */
+	if (ctrl.s3entry_method == 1) {
+		shimphy_set((PWRDWN_SEQ_NO_SEQUENCING <<
+			    SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+			    ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+		ddr_ctrl_set(false);
+	}
+
+	brcmstb_pm_do_s2_sram = brcmstb_pm_copy_to_sram(&brcmstb_pm_do_s2,
+			brcmstb_pm_do_s2_sz);
+	if (!brcmstb_pm_do_s2_sram)
+		return -EINVAL;
+
+	return brcmstb_pm_do_s2_sram(ctrl.aon_ctrl_base,
+			ctrl.memcs[0].ddr_phy_base +
+			ctrl.pll_status_offset);
+}
+
+/*
+ * This function is called on a new stack, so don't allow inlining (which will
+ * generate stack references on the old stack). It cannot be made static because
+ * it is referenced from brcmstb_pm_s3()
+ */
+noinline int brcmstb_pm_s3_finish(void)
+{
+	struct brcmstb_s3_params *params = ctrl.s3_params;
+	dma_addr_t params_pa = ctrl.s3_params_pa;
+	phys_addr_t reentry = virt_to_phys(&cpu_resume_arm);
+	enum bsp_initiate_command cmd;
+	u32 flags;
+
+	/*
+	 * Clear parameter structure, but not DTU area, which has already been
+	 * filled in. We know DTU is a the end, so we can just subtract its
+	 * size.
+	 */
+	memset(params, 0, sizeof(*params) - sizeof(params->dtu));
+
+	flags = readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+
+	flags &= S3_BOOTLOADER_RESERVED;
+	flags |= S3_FLAG_NO_MEM_VERIFY;
+	flags |= S3_FLAG_LOAD_RANDKEY;
+
+	/* Load random / fixed key */
+	if (flags & S3_FLAG_LOAD_RANDKEY)
+		cmd = BSP_GEN_RANDOM_KEY;
+	else
+		cmd = BSP_GEN_FIXED_KEY;
+	if (do_bsp_initiate_command(cmd)) {
+		pr_info("key loading failed\n");
+		return -EIO;
+	}
+
+	params->magic = BRCMSTB_S3_MAGIC;
+	params->reentry = reentry;
+
+	/* No more writes to DRAM */
+	flush_cache_all();
+
+	flags |= BRCMSTB_S3_MAGIC_SHORT;
+
+	writel_relaxed(flags, ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+	writel_relaxed(lower_32_bits(params_pa),
+		       ctrl.aon_sram + AON_REG_CONTROL_LOW);
+	writel_relaxed(upper_32_bits(params_pa),
+		       ctrl.aon_sram + AON_REG_CONTROL_HIGH);
+
+	switch (ctrl.s3entry_method) {
+	case 0:
+		s3entry_method0();
+		brcmstb_do_pmsm_power_down(PM_WARM_CONFIG, false);
+		break;
+	case 1:
+		s3entry_method1();
+		brcmstb_do_pmsm_power_down(M1_PM_WARM_CONFIG, true);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Must have been interrupted from wfi()? */
+	return -EINTR;
+}
+
+static int brcmstb_pm_do_s3(unsigned long sp)
+{
+	unsigned long save_sp;
+	int ret;
+
+	asm volatile (
+		"mov	%[save], sp\n"
+		"mov	sp, %[new]\n"
+		"bl	brcmstb_pm_s3_finish\n"
+		"mov	%[ret], r0\n"
+		"mov	%[new], sp\n"
+		"mov	sp, %[save]\n"
+		: [save] "=&r" (save_sp), [ret] "=&r" (ret)
+		: [new] "r" (sp)
+	);
+
+	return ret;
+}
+
+static int brcmstb_pm_s3(void)
+{
+	void __iomem *sp = ctrl.boot_sram + ctrl.boot_sram_len;
+
+	return cpu_suspend((unsigned long)sp, brcmstb_pm_do_s3);
+}
+
+static int brcmstb_pm_standby(bool deep_standby)
+{
+	int ret;
+
+	if (brcmstb_pm_handshake())
+		return -EIO;
+
+	if (deep_standby)
+		ret = brcmstb_pm_s3();
+	else
+		ret = brcmstb_pm_s2();
+	if (ret)
+		pr_err("%s: standby failed\n", __func__);
+
+	return ret;
+}
+
+static int brcmstb_pm_enter(suspend_state_t state)
+{
+	int ret = -EINVAL;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		ret = brcmstb_pm_standby(false);
+		break;
+	case PM_SUSPEND_MEM:
+		ret = brcmstb_pm_standby(true);
+		break;
+	}
+
+	return ret;
+}
+
+static int brcmstb_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return true;
+	case PM_SUSPEND_MEM:
+		return ctrl.support_warm_boot;
+	default:
+		return false;
+	}
+}
+
+static const struct platform_suspend_ops brcmstb_pm_ops = {
+	.enter		= brcmstb_pm_enter,
+	.valid		= brcmstb_pm_valid,
+};
+
+static const struct of_device_id aon_ctrl_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-aon-ctrl" },
+	{}
+};
+
+struct ddr_phy_ofdata {
+	bool supports_warm_boot;
+	size_t pll_status_offset;
+	int s3entry_method;
+	u32 warm_boot_offset;
+	u32 phy_a_standby_ctrl_offs;
+	u32 phy_b_standby_ctrl_offs;
+};
+
+static struct ddr_phy_ofdata ddr_phy_71_1 = {
+	.supports_warm_boot = true,
+	.pll_status_offset = 0x0c,
+	.s3entry_method = 1,
+	.warm_boot_offset = 0x2c,
+	.phy_a_standby_ctrl_offs = 0x198,
+	.phy_b_standby_ctrl_offs = DDR_PHY_NO_CHANNEL
+};
+
+static struct ddr_phy_ofdata ddr_phy_72_0 = {
+	.supports_warm_boot = true,
+	.pll_status_offset = 0x10,
+	.s3entry_method = 1,
+	.warm_boot_offset = 0x40,
+	.phy_a_standby_ctrl_offs = 0x2a4,
+	.phy_b_standby_ctrl_offs = 0x8a4
+};
+
+static struct ddr_phy_ofdata ddr_phy_225_1 = {
+	.supports_warm_boot = false,
+	.pll_status_offset = 0x4,
+	.s3entry_method = 0
+};
+
+static struct ddr_phy_ofdata ddr_phy_240_1 = {
+	.supports_warm_boot = true,
+	.pll_status_offset = 0x4,
+	.s3entry_method = 0
+};
+
+static const struct of_device_id ddr_phy_dt_ids[] = {
+	{
+		.compatible = "brcm,brcmstb-ddr-phy-v71.1",
+		.data = &ddr_phy_71_1,
+	},
+	{
+		.compatible = "brcm,brcmstb-ddr-phy-v72.0",
+		.data = &ddr_phy_72_0,
+	},
+	{
+		.compatible = "brcm,brcmstb-ddr-phy-v225.1",
+		.data = &ddr_phy_225_1,
+	},
+	{
+		.compatible = "brcm,brcmstb-ddr-phy-v240.1",
+		.data = &ddr_phy_240_1,
+	},
+	{
+		/* Same as v240.1, for the registers we care about */
+		.compatible = "brcm,brcmstb-ddr-phy-v240.2",
+		.data = &ddr_phy_240_1,
+	},
+	{}
+};
+
+struct ddr_seq_ofdata {
+	bool needs_ddr_pad;
+	u32 warm_boot_offset;
+};
+
+static const struct ddr_seq_ofdata ddr_seq_b22 = {
+	.needs_ddr_pad = false,
+	.warm_boot_offset = 0x2c,
+};
+
+static const struct ddr_seq_ofdata ddr_seq = {
+	.needs_ddr_pad = true,
+};
+
+static const struct of_device_id ddr_shimphy_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-ddr-shimphy-v1.0" },
+	{}
+};
+
+static const struct of_device_id brcmstb_memc_of_match[] = {
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.1",
+		.data = &ddr_seq,
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2",
+		.data = &ddr_seq_b22,
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.2.3",
+		.data = &ddr_seq_b22,
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.3.0",
+		.data = &ddr_seq_b22,
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr-rev-b.3.1",
+		.data = &ddr_seq_b22,
+	},
+	{
+		.compatible = "brcm,brcmstb-memc-ddr",
+		.data = &ddr_seq,
+	},
+	{},
+};
+
+static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches,
+					   int index, const void **ofdata)
+{
+	struct device_node *dn;
+	const struct of_device_id *match;
+
+	dn = of_find_matching_node_and_match(NULL, matches, &match);
+	if (!dn)
+		return ERR_PTR(-EINVAL);
+
+	if (ofdata)
+		*ofdata = match->data;
+
+	return of_io_request_and_map(dn, index, dn->full_name);
+}
+
+static int brcmstb_pm_panic_notify(struct notifier_block *nb,
+		unsigned long action, void *data)
+{
+	writel_relaxed(BRCMSTB_PANIC_MAGIC, ctrl.aon_sram + AON_REG_PANIC);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block brcmstb_pm_panic_nb = {
+	.notifier_call = brcmstb_pm_panic_notify,
+};
+
+static int brcmstb_pm_probe(struct platform_device *pdev)
+{
+	const struct ddr_phy_ofdata *ddr_phy_data;
+	const struct ddr_seq_ofdata *ddr_seq_data;
+	const struct of_device_id *of_id = NULL;
+	struct device_node *dn;
+	void __iomem *base;
+	int ret, i, s;
+
+	/* AON ctrl registers */
+	base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL);
+	if (IS_ERR(base)) {
+		pr_err("error mapping AON_CTRL\n");
+		ret = PTR_ERR(base);
+		goto aon_err;
+	}
+	ctrl.aon_ctrl_base = base;
+
+	/* AON SRAM registers */
+	base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL);
+	if (IS_ERR(base)) {
+		/* Assume standard offset */
+		ctrl.aon_sram = ctrl.aon_ctrl_base +
+				     AON_CTRL_SYSTEM_DATA_RAM_OFS;
+		s = 0;
+	} else {
+		ctrl.aon_sram = base;
+		s = 1;
+	}
+
+	writel_relaxed(0, ctrl.aon_sram + AON_REG_PANIC);
+
+	/* DDR PHY registers */
+	base = brcmstb_ioremap_match(ddr_phy_dt_ids, 0,
+				     (const void **)&ddr_phy_data);
+	if (IS_ERR(base)) {
+		pr_err("error mapping DDR PHY\n");
+		ret = PTR_ERR(base);
+		goto ddr_phy_err;
+	}
+	ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot;
+	ctrl.pll_status_offset = ddr_phy_data->pll_status_offset;
+	/* Only need DDR PHY 0 for now? */
+	ctrl.memcs[0].ddr_phy_base = base;
+	ctrl.s3entry_method = ddr_phy_data->s3entry_method;
+	ctrl.phy_a_standby_ctrl_offs = ddr_phy_data->phy_a_standby_ctrl_offs;
+	ctrl.phy_b_standby_ctrl_offs = ddr_phy_data->phy_b_standby_ctrl_offs;
+	/*
+	 * Slightly grosss to use the phy ver to get a memc,
+	 * offset but that is the only versioned things so far
+	 * we can test for.
+	 */
+	ctrl.warm_boot_offset = ddr_phy_data->warm_boot_offset;
+
+	/* DDR SHIM-PHY registers */
+	for_each_matching_node(dn, ddr_shimphy_dt_ids) {
+		i = ctrl.num_memc;
+		if (i >= MAX_NUM_MEMC) {
+			of_node_put(dn);
+			pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC);
+			break;
+		}
+
+		base = of_io_request_and_map(dn, 0, dn->full_name);
+		if (IS_ERR(base)) {
+			of_node_put(dn);
+			if (!ctrl.support_warm_boot)
+				break;
+
+			pr_err("error mapping DDR SHIMPHY %d\n", i);
+			ret = PTR_ERR(base);
+			goto ddr_shimphy_err;
+		}
+		ctrl.memcs[i].ddr_shimphy_base = base;
+		ctrl.num_memc++;
+	}
+
+	/* Sequencer DRAM Param and Control Registers */
+	i = 0;
+	for_each_matching_node(dn, brcmstb_memc_of_match) {
+		base = of_iomap(dn, 0);
+		if (!base) {
+			of_node_put(dn);
+			pr_err("error mapping DDR Sequencer %d\n", i);
+			ret = -ENOMEM;
+			goto brcmstb_memc_err;
+		}
+
+		of_id = of_match_node(brcmstb_memc_of_match, dn);
+		if (!of_id) {
+			iounmap(base);
+			of_node_put(dn);
+			ret = -EINVAL;
+			goto brcmstb_memc_err;
+		}
+
+		ddr_seq_data = of_id->data;
+		ctrl.needs_ddr_pad = ddr_seq_data->needs_ddr_pad;
+		/* Adjust warm boot offset based on the DDR sequencer */
+		if (ddr_seq_data->warm_boot_offset)
+			ctrl.warm_boot_offset = ddr_seq_data->warm_boot_offset;
+
+		ctrl.memcs[i].ddr_ctrl = base;
+		i++;
+	}
+
+	pr_debug("PM: supports warm boot:%d, method:%d, wboffs:%x\n",
+		ctrl.support_warm_boot, ctrl.s3entry_method,
+		ctrl.warm_boot_offset);
+
+	dn = of_find_matching_node(NULL, sram_dt_ids);
+	if (!dn) {
+		pr_err("SRAM not found\n");
+		ret = -EINVAL;
+		goto brcmstb_memc_err;
+	}
+
+	ret = brcmstb_init_sram(dn);
+	of_node_put(dn);
+	if (ret) {
+		pr_err("error setting up SRAM for PM\n");
+		goto brcmstb_memc_err;
+	}
+
+	ctrl.pdev = pdev;
+
+	ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL);
+	if (!ctrl.s3_params) {
+		ret = -ENOMEM;
+		goto s3_params_err;
+	}
+	ctrl.s3_params_pa = dma_map_single(&pdev->dev, ctrl.s3_params,
+					   sizeof(*ctrl.s3_params),
+					   DMA_TO_DEVICE);
+	if (dma_mapping_error(&pdev->dev, ctrl.s3_params_pa)) {
+		pr_err("error mapping DMA memory\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &brcmstb_pm_panic_nb);
+
+	pm_power_off = brcmstb_pm_poweroff;
+	suspend_set_ops(&brcmstb_pm_ops);
+
+	return 0;
+
+out:
+	kfree(ctrl.s3_params);
+s3_params_err:
+	iounmap(ctrl.boot_sram);
+brcmstb_memc_err:
+	for (i--; i >= 0; i--)
+		iounmap(ctrl.memcs[i].ddr_ctrl);
+ddr_shimphy_err:
+	for (i = 0; i < ctrl.num_memc; i++)
+		iounmap(ctrl.memcs[i].ddr_shimphy_base);
+
+	iounmap(ctrl.memcs[0].ddr_phy_base);
+ddr_phy_err:
+	iounmap(ctrl.aon_ctrl_base);
+	if (s)
+		iounmap(ctrl.aon_sram);
+aon_err:
+	pr_warn("PM: initialization failed with code %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver brcmstb_pm_driver = {
+	.driver = {
+		.name	= "brcmstb-pm",
+		.of_match_table = aon_ctrl_dt_ids,
+	},
+};
+
+static int __init brcmstb_pm_init(void)
+{
+	return platform_driver_probe(&brcmstb_pm_driver,
+				     brcmstb_pm_probe);
+}
+module_init(brcmstb_pm_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-mips.c b/drivers/soc/bcm/brcmstb/pm/pm-mips.c
new file mode 100644
index 000000000..cdc3e387f
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm-mips.c
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MIPS-specific support for Broadcom STB S2/S3/S5 power management
+ *
+ * Copyright (C) 2016-2017 Broadcom
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+#include <asm/bmips.h>
+#include <asm/tlbflush.h>
+
+#include "pm.h"
+
+#define S2_NUM_PARAMS		6
+#define MAX_NUM_MEMC		3
+
+/* S3 constants */
+#define MAX_GP_REGS		16
+#define MAX_CP0_REGS		32
+#define NUM_MEMC_CLIENTS	128
+#define AON_CTRL_RAM_SIZE	128
+#define BRCMSTB_S3_MAGIC	0x5AFEB007
+
+#define CLEAR_RESET_MASK	0x01
+
+/* Index each CP0 register that needs to be saved */
+#define CONTEXT		0
+#define USER_LOCAL	1
+#define PGMK		2
+#define HWRENA		3
+#define COMPARE		4
+#define STATUS		5
+#define CONFIG		6
+#define MODE		7
+#define EDSP		8
+#define BOOT_VEC	9
+#define EBASE		10
+
+struct brcmstb_memc {
+	void __iomem *ddr_phy_base;
+	void __iomem *arb_base;
+};
+
+struct brcmstb_pm_control {
+	void __iomem *aon_ctrl_base;
+	void __iomem *aon_sram_base;
+	void __iomem *timers_base;
+	struct brcmstb_memc memcs[MAX_NUM_MEMC];
+	int num_memc;
+};
+
+struct brcm_pm_s3_context {
+	u32			cp0_regs[MAX_CP0_REGS];
+	u32			memc0_rts[NUM_MEMC_CLIENTS];
+	u32			sc_boot_vec;
+};
+
+struct brcmstb_mem_transfer;
+
+struct brcmstb_mem_transfer {
+	struct brcmstb_mem_transfer	*next;
+	void				*src;
+	void				*dst;
+	dma_addr_t			pa_src;
+	dma_addr_t			pa_dst;
+	u32				len;
+	u8				key;
+	u8				mode;
+	u8				src_remapped;
+	u8				dst_remapped;
+	u8				src_dst_remapped;
+};
+
+#define AON_SAVE_SRAM(base, idx, val) \
+	__raw_writel(val, base + (idx << 2))
+
+/* Used for saving registers in asm */
+u32 gp_regs[MAX_GP_REGS];
+
+#define	BSP_CLOCK_STOP		0x00
+#define PM_INITIATE		0x01
+
+static struct brcmstb_pm_control ctrl;
+
+static void brcm_pm_save_cp0_context(struct brcm_pm_s3_context *ctx)
+{
+	/* Generic MIPS */
+	ctx->cp0_regs[CONTEXT] = read_c0_context();
+	ctx->cp0_regs[USER_LOCAL] = read_c0_userlocal();
+	ctx->cp0_regs[PGMK] = read_c0_pagemask();
+	ctx->cp0_regs[HWRENA] = read_c0_cache();
+	ctx->cp0_regs[COMPARE] = read_c0_compare();
+	ctx->cp0_regs[STATUS] = read_c0_status();
+
+	/* Broadcom specific */
+	ctx->cp0_regs[CONFIG] = read_c0_brcm_config();
+	ctx->cp0_regs[MODE] = read_c0_brcm_mode();
+	ctx->cp0_regs[EDSP] = read_c0_brcm_edsp();
+	ctx->cp0_regs[BOOT_VEC] = read_c0_brcm_bootvec();
+	ctx->cp0_regs[EBASE] = read_c0_ebase();
+
+	ctx->sc_boot_vec = bmips_read_zscm_reg(0xa0);
+}
+
+static void brcm_pm_restore_cp0_context(struct brcm_pm_s3_context *ctx)
+{
+	/* Restore cp0 state */
+	bmips_write_zscm_reg(0xa0, ctx->sc_boot_vec);
+
+	/* Generic MIPS */
+	write_c0_context(ctx->cp0_regs[CONTEXT]);
+	write_c0_userlocal(ctx->cp0_regs[USER_LOCAL]);
+	write_c0_pagemask(ctx->cp0_regs[PGMK]);
+	write_c0_cache(ctx->cp0_regs[HWRENA]);
+	write_c0_compare(ctx->cp0_regs[COMPARE]);
+	write_c0_status(ctx->cp0_regs[STATUS]);
+
+	/* Broadcom specific */
+	write_c0_brcm_config(ctx->cp0_regs[CONFIG]);
+	write_c0_brcm_mode(ctx->cp0_regs[MODE]);
+	write_c0_brcm_edsp(ctx->cp0_regs[EDSP]);
+	write_c0_brcm_bootvec(ctx->cp0_regs[BOOT_VEC]);
+	write_c0_ebase(ctx->cp0_regs[EBASE]);
+}
+
+static void  brcmstb_pm_handshake(void)
+{
+	void __iomem *base = ctrl.aon_ctrl_base;
+	u32 tmp;
+
+	/* BSP power handshake, v1 */
+	tmp = __raw_readl(base + AON_CTRL_HOST_MISC_CMDS);
+	tmp &= ~1UL;
+	__raw_writel(tmp, base + AON_CTRL_HOST_MISC_CMDS);
+	(void)__raw_readl(base + AON_CTRL_HOST_MISC_CMDS);
+
+	__raw_writel(0, base + AON_CTRL_PM_INITIATE);
+	(void)__raw_readl(base + AON_CTRL_PM_INITIATE);
+	__raw_writel(BSP_CLOCK_STOP | PM_INITIATE,
+		     base + AON_CTRL_PM_INITIATE);
+	/*
+	 * HACK: BSP may have internal race on the CLOCK_STOP command.
+	 * Avoid touching the BSP for a few milliseconds.
+	 */
+	mdelay(3);
+}
+
+static void brcmstb_pm_s5(void)
+{
+	void __iomem *base = ctrl.aon_ctrl_base;
+
+	brcmstb_pm_handshake();
+
+	/* Clear magic s3 warm-boot value */
+	AON_SAVE_SRAM(ctrl.aon_sram_base, 0, 0);
+
+	/* Set the countdown */
+	__raw_writel(0x10, base + AON_CTRL_PM_CPU_WAIT_COUNT);
+	(void)__raw_readl(base + AON_CTRL_PM_CPU_WAIT_COUNT);
+
+	/* Prepare to S5 cold boot */
+	__raw_writel(PM_COLD_CONFIG, base + AON_CTRL_PM_CTRL);
+	(void)__raw_readl(base + AON_CTRL_PM_CTRL);
+
+	__raw_writel((PM_COLD_CONFIG | PM_PWR_DOWN), base +
+		      AON_CTRL_PM_CTRL);
+	(void)__raw_readl(base + AON_CTRL_PM_CTRL);
+
+	__asm__ __volatile__(
+	"	wait\n"
+	: : : "memory");
+}
+
+static int brcmstb_pm_s3(void)
+{
+	struct brcm_pm_s3_context s3_context;
+	void __iomem *memc_arb_base;
+	unsigned long flags;
+	u32 tmp;
+	int i;
+
+	/* Prepare for s3 */
+	AON_SAVE_SRAM(ctrl.aon_sram_base, 0, BRCMSTB_S3_MAGIC);
+	AON_SAVE_SRAM(ctrl.aon_sram_base, 1, (u32)&s3_reentry);
+	AON_SAVE_SRAM(ctrl.aon_sram_base, 2, 0);
+
+	/* Clear RESET_HISTORY */
+	tmp = __raw_readl(ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL);
+	tmp &= ~CLEAR_RESET_MASK;
+	__raw_writel(tmp, ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL);
+
+	local_irq_save(flags);
+
+	/* Inhibit DDR_RSTb pulse for both MMCs*/
+	for (i = 0; i < ctrl.num_memc; i++) {
+		tmp = __raw_readl(ctrl.memcs[i].ddr_phy_base +
+			DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+
+		tmp &= ~0x0f;
+		__raw_writel(tmp, ctrl.memcs[i].ddr_phy_base +
+			DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+		tmp |= (0x05 | BIT(5));
+		__raw_writel(tmp, ctrl.memcs[i].ddr_phy_base +
+			DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+	}
+
+	/* Save CP0 context */
+	brcm_pm_save_cp0_context(&s3_context);
+
+	/* Save RTS(skip debug register) */
+	memc_arb_base = ctrl.memcs[0].arb_base + 4;
+	for (i = 0; i < NUM_MEMC_CLIENTS; i++) {
+		s3_context.memc0_rts[i] = __raw_readl(memc_arb_base);
+		memc_arb_base += 4;
+	}
+
+	/* Save I/O context */
+	local_flush_tlb_all();
+	_dma_cache_wback_inv(0, ~0);
+
+	brcm_pm_do_s3(ctrl.aon_ctrl_base, current_cpu_data.dcache.linesz);
+
+	/* CPU reconfiguration */
+	local_flush_tlb_all();
+	bmips_cpu_setup();
+	cpumask_clear(&bmips_booted_mask);
+
+	/* Restore RTS (skip debug register) */
+	memc_arb_base = ctrl.memcs[0].arb_base + 4;
+	for (i = 0; i < NUM_MEMC_CLIENTS; i++) {
+		__raw_writel(s3_context.memc0_rts[i], memc_arb_base);
+		memc_arb_base += 4;
+	}
+
+	/* restore CP0 context */
+	brcm_pm_restore_cp0_context(&s3_context);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int brcmstb_pm_s2(void)
+{
+	/*
+	 * We need to pass 6 arguments to an assembly function. Lets avoid the
+	 * stack and pass arguments in a explicit 4 byte array. The assembly
+	 * code assumes all arguments are 4 bytes and arguments are ordered
+	 * like so:
+	 *
+	 * 0: AON_CTRl base register
+	 * 1: DDR_PHY base register
+	 * 2: TIMERS base resgister
+	 * 3: I-Cache line size
+	 * 4: Restart vector address
+	 * 5: Restart vector size
+	 */
+	u32 s2_params[6];
+
+	/* Prepare s2 parameters */
+	s2_params[0] = (u32)ctrl.aon_ctrl_base;
+	s2_params[1] = (u32)ctrl.memcs[0].ddr_phy_base;
+	s2_params[2] = (u32)ctrl.timers_base;
+	s2_params[3] = (u32)current_cpu_data.icache.linesz;
+	s2_params[4] = (u32)BMIPS_WARM_RESTART_VEC;
+	s2_params[5] = (u32)(bmips_smp_int_vec_end -
+		bmips_smp_int_vec);
+
+	/* Drop to standby */
+	brcm_pm_do_s2(s2_params);
+
+	return 0;
+}
+
+static int brcmstb_pm_standby(bool deep_standby)
+{
+	brcmstb_pm_handshake();
+
+	/* Send IRQs to BMIPS_WARM_RESTART_VEC */
+	clear_c0_cause(CAUSEF_IV);
+	irq_disable_hazard();
+	set_c0_status(ST0_BEV);
+	irq_disable_hazard();
+
+	if (deep_standby)
+		brcmstb_pm_s3();
+	else
+		brcmstb_pm_s2();
+
+	/* Send IRQs to normal runtime vectors */
+	clear_c0_status(ST0_BEV);
+	irq_disable_hazard();
+	set_c0_cause(CAUSEF_IV);
+	irq_disable_hazard();
+
+	return 0;
+}
+
+static int brcmstb_pm_enter(suspend_state_t state)
+{
+	int ret = -EINVAL;
+
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		ret = brcmstb_pm_standby(false);
+		break;
+	case PM_SUSPEND_MEM:
+		ret = brcmstb_pm_standby(true);
+		break;
+	}
+
+	return ret;
+}
+
+static int brcmstb_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return true;
+	case PM_SUSPEND_MEM:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct platform_suspend_ops brcmstb_pm_ops = {
+	.enter		= brcmstb_pm_enter,
+	.valid		= brcmstb_pm_valid,
+};
+
+static const struct of_device_id aon_ctrl_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-aon-ctrl" },
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id ddr_phy_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-ddr-phy" },
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id arb_dt_ids[] = {
+	{ .compatible = "brcm,brcmstb-memc-arb" },
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id timers_ids[] = {
+	{ .compatible = "brcm,brcmstb-timers" },
+	{ /* sentinel */ }
+};
+
+static inline void __iomem *brcmstb_ioremap_node(struct device_node *dn,
+						 int index)
+{
+	return of_io_request_and_map(dn, index, dn->full_name);
+}
+
+static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches,
+					   int index, const void **ofdata)
+{
+	struct device_node *dn;
+	const struct of_device_id *match;
+
+	dn = of_find_matching_node_and_match(NULL, matches, &match);
+	if (!dn)
+		return ERR_PTR(-EINVAL);
+
+	if (ofdata)
+		*ofdata = match->data;
+
+	return brcmstb_ioremap_node(dn, index);
+}
+
+static int brcmstb_pm_init(void)
+{
+	struct device_node *dn;
+	void __iomem *base;
+	int i;
+
+	/* AON ctrl registers */
+	base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL);
+	if (IS_ERR(base)) {
+		pr_err("error mapping AON_CTRL\n");
+		goto aon_err;
+	}
+	ctrl.aon_ctrl_base = base;
+
+	/* AON SRAM registers */
+	base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL);
+	if (IS_ERR(base)) {
+		pr_err("error mapping AON_SRAM\n");
+		goto sram_err;
+	}
+	ctrl.aon_sram_base = base;
+
+	ctrl.num_memc = 0;
+	/* Map MEMC DDR PHY registers */
+	for_each_matching_node(dn, ddr_phy_dt_ids) {
+		i = ctrl.num_memc;
+		if (i >= MAX_NUM_MEMC) {
+			pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC);
+			break;
+		}
+		base = brcmstb_ioremap_node(dn, 0);
+		if (IS_ERR(base))
+			goto ddr_err;
+
+		ctrl.memcs[i].ddr_phy_base = base;
+		ctrl.num_memc++;
+	}
+
+	/* MEMC ARB registers */
+	base = brcmstb_ioremap_match(arb_dt_ids, 0, NULL);
+	if (IS_ERR(base)) {
+		pr_err("error mapping MEMC ARB\n");
+		goto ddr_err;
+	}
+	ctrl.memcs[0].arb_base = base;
+
+	/* Timer registers */
+	base = brcmstb_ioremap_match(timers_ids, 0, NULL);
+	if (IS_ERR(base)) {
+		pr_err("error mapping timers\n");
+		goto tmr_err;
+	}
+	ctrl.timers_base = base;
+
+	/* s3 cold boot aka s5 */
+	pm_power_off = brcmstb_pm_s5;
+
+	suspend_set_ops(&brcmstb_pm_ops);
+
+	return 0;
+
+tmr_err:
+	iounmap(ctrl.memcs[0].arb_base);
+ddr_err:
+	for (i = 0; i < ctrl.num_memc; i++)
+		iounmap(ctrl.memcs[i].ddr_phy_base);
+
+	iounmap(ctrl.aon_sram_base);
+sram_err:
+	iounmap(ctrl.aon_ctrl_base);
+aon_err:
+	return PTR_ERR(base);
+}
+arch_initcall(brcmstb_pm_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/pm.h b/drivers/soc/bcm/brcmstb/pm/pm.h
new file mode 100644
index 000000000..94a380470
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Definitions for Broadcom STB power management / Always ON (AON) block
+ *
+ * Copyright © 2016-2017 Broadcom
+ */
+
+#ifndef __BRCMSTB_PM_H__
+#define __BRCMSTB_PM_H__
+
+#define AON_CTRL_RESET_CTRL		0x00
+#define AON_CTRL_PM_CTRL		0x04
+#define AON_CTRL_PM_STATUS		0x08
+#define AON_CTRL_PM_CPU_WAIT_COUNT	0x10
+#define AON_CTRL_PM_INITIATE		0x88
+#define AON_CTRL_HOST_MISC_CMDS		0x8c
+#define AON_CTRL_SYSTEM_DATA_RAM_OFS	0x200
+
+/* MIPS PM constants */
+/* MEMC0 offsets */
+#define DDR40_PHY_CONTROL_REGS_0_PLL_STATUS	0x10
+#define DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL	0xa4
+
+/* TIMER offsets */
+#define TIMER_TIMER1_CTRL		0x0c
+#define TIMER_TIMER1_STAT		0x1c
+
+/* TIMER defines */
+#define RESET_TIMER			0x0
+#define START_TIMER			0xbfffffff
+#define TIMER_MASK			0x3fffffff
+
+/* PM_CTRL bitfield (Method #0) */
+#define PM_FAST_PWRDOWN			(1 << 6)
+#define PM_WARM_BOOT			(1 << 5)
+#define PM_DEEP_STANDBY			(1 << 4)
+#define PM_CPU_PWR			(1 << 3)
+#define PM_USE_CPU_RDY			(1 << 2)
+#define PM_PLL_PWRDOWN			(1 << 1)
+#define PM_PWR_DOWN			(1 << 0)
+
+/* PM_CTRL bitfield (Method #1) */
+#define PM_DPHY_STANDBY_CLEAR		(1 << 20)
+#define PM_MIN_S3_WIDTH_TIMER_BYPASS	(1 << 7)
+
+#define PM_S2_COMMAND	(PM_PLL_PWRDOWN | PM_USE_CPU_RDY | PM_PWR_DOWN)
+
+/* Method 0 bitmasks */
+#define PM_COLD_CONFIG	(PM_PLL_PWRDOWN | PM_DEEP_STANDBY)
+#define PM_WARM_CONFIG	(PM_COLD_CONFIG | PM_USE_CPU_RDY | PM_WARM_BOOT)
+
+/* Method 1 bitmask */
+#define M1_PM_WARM_CONFIG (PM_DPHY_STANDBY_CLEAR | \
+			   PM_MIN_S3_WIDTH_TIMER_BYPASS | \
+			   PM_WARM_BOOT | PM_DEEP_STANDBY | \
+			   PM_PLL_PWRDOWN | PM_PWR_DOWN)
+
+#define M1_PM_COLD_CONFIG (PM_DPHY_STANDBY_CLEAR | \
+			   PM_MIN_S3_WIDTH_TIMER_BYPASS | \
+			   PM_DEEP_STANDBY | \
+			   PM_PLL_PWRDOWN | PM_PWR_DOWN)
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_MIPS
+extern const unsigned long brcmstb_pm_do_s2_sz;
+extern asmlinkage int brcmstb_pm_do_s2(void __iomem *aon_ctrl_base,
+		void __iomem *ddr_phy_pll_status);
+#else
+/* s2 asm */
+extern asmlinkage int brcm_pm_do_s2(u32 *s2_params);
+
+/* s3 asm */
+extern asmlinkage int brcm_pm_do_s3(void __iomem *aon_ctrl_base,
+		int dcache_linesz);
+extern int s3_reentry;
+#endif /* CONFIG_MIPS */
+
+#endif 
+
+#endif /* __BRCMSTB_PM_H__ */
diff --git a/drivers/soc/bcm/brcmstb/pm/s2-arm.S b/drivers/soc/bcm/brcmstb/pm/s2-arm.S
new file mode 100644
index 000000000..5f0c4a8ae
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s2-arm.S
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright © 2014-2017 Broadcom
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+	.text
+	.align	3
+
+#define AON_CTRL_REG		r10
+#define DDR_PHY_STATUS_REG	r11
+
+/*
+ * r0: AON_CTRL base address
+ * r1: DDRY PHY PLL status register address
+ */
+ENTRY(brcmstb_pm_do_s2)
+	stmfd	sp!, {r4-r11, lr}
+	mov	AON_CTRL_REG, r0
+	mov	DDR_PHY_STATUS_REG, r1
+
+	/* Flush memory transactions */
+	dsb
+
+	/* Cache DDR_PHY_STATUS_REG translation */
+	ldr	r0, [DDR_PHY_STATUS_REG]
+
+	/* power down request */
+	ldr	r0, =PM_S2_COMMAND
+	ldr	r1, =0
+	str	r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	str	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+	/* Wait for interrupt */
+	wfi
+	nop
+
+	/* Bring MEMC back up */
+1:	ldr	r0, [DDR_PHY_STATUS_REG]
+	ands	r0, #1
+	beq	1b
+
+	/* Power-up handshake */
+	ldr	r0, =1
+	str	r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+
+	ldr	r0, =0
+	str	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+	ldr	r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+	/* Return to caller */
+	ldr	r0, =0
+	ldmfd	sp!, {r4-r11, pc}
+
+	ENDPROC(brcmstb_pm_do_s2)
+
+	/* Place literal pool here */
+	.ltorg
+
+ENTRY(brcmstb_pm_do_s2_sz)
+	.word   . - brcmstb_pm_do_s2
diff --git a/drivers/soc/bcm/brcmstb/pm/s2-mips.S b/drivers/soc/bcm/brcmstb/pm/s2-mips.S
new file mode 100644
index 000000000..2a26a94eb
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s2-mips.S
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 Broadcom Corporation
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+
+#include "pm.h"
+
+	.text
+	.set	noreorder
+	.align	5
+
+/*
+ * a0: u32 params array
+ */
+LEAF(brcm_pm_do_s2)
+
+	subu	sp, 64
+	sw	ra, 0(sp)
+	sw	s0, 4(sp)
+	sw	s1, 8(sp)
+	sw	s2, 12(sp)
+	sw	s3, 16(sp)
+	sw	s4, 20(sp)
+	sw	s5, 24(sp)
+	sw	s6, 28(sp)
+	sw	s7, 32(sp)
+
+	/*
+	 * Dereference the params array
+	 * s0: AON_CTRL base register
+	 * s1: DDR_PHY base register
+	 * s2: TIMERS base register
+	 * s3: I-Cache line size
+	 * s4: Restart vector address
+	 * s5: Restart vector size
+	 */
+	move	t0, a0
+
+	lw	s0, 0(t0)
+	lw	s1, 4(t0)
+	lw	s2, 8(t0)
+	lw	s3, 12(t0)
+	lw	s4, 16(t0)
+	lw	s5, 20(t0)
+
+	/* Lock this asm section into the I-cache */
+	addiu	t1, s3, -1
+	not	t1
+
+	la	t0, brcm_pm_do_s2
+	and	t0, t1
+
+	la	t2, asm_end
+	and	t2, t1
+
+1:	cache	0x1c, 0(t0)
+	bne	t0, t2, 1b
+	addu	t0, s3
+
+	/* Lock the interrupt vector into the I-cache */
+	move	t0, zero
+
+2:	move	t1, s4
+	cache 	0x1c, 0(t1)
+	addu	t1, s3
+	addu	t0, s3
+	ble	t0, s5, 2b
+	nop
+
+	sync
+
+	/* Power down request */
+	li	t0, PM_S2_COMMAND
+	sw	zero, AON_CTRL_PM_CTRL(s0)
+	lw	zero, AON_CTRL_PM_CTRL(s0)
+	sw	t0, AON_CTRL_PM_CTRL(s0)
+	lw	t0, AON_CTRL_PM_CTRL(s0)
+
+	/* Enable CP0 interrupt 2 and wait for interrupt */
+	mfc0	t0, CP0_STATUS
+	/* Save cp0 sr for restoring later */
+	move	s6, t0
+
+	li	t1, ~(ST0_IM | ST0_IE)
+	and	t0, t1
+	ori	t0, STATUSF_IP2
+	mtc0	t0, CP0_STATUS
+	nop
+	nop
+	nop
+	ori	t0, ST0_IE
+	mtc0	t0, CP0_STATUS
+
+	/* Wait for interrupt */
+	wait
+	nop
+
+	/* Wait for memc0 */
+1:	lw	t0, DDR40_PHY_CONTROL_REGS_0_PLL_STATUS(s1)
+	andi	t0, 1
+	beqz	t0, 1b
+	nop
+
+	/* 1ms delay needed for stable recovery */
+	/* Use TIMER1 to count 1 ms */
+	li	t0, RESET_TIMER
+	sw	t0, TIMER_TIMER1_CTRL(s2)
+	lw	t0, TIMER_TIMER1_CTRL(s2)
+
+	li	t0, START_TIMER
+	sw	t0, TIMER_TIMER1_CTRL(s2)
+	lw	t0, TIMER_TIMER1_CTRL(s2)
+
+	/* Prepare delay */
+	li	t0, TIMER_MASK
+	lw	t1, TIMER_TIMER1_STAT(s2)
+	and	t1, t0
+	/* 1ms delay */
+	addi	t1, 27000
+
+	/* Wait for the timer value to exceed t1 */
+1:	lw	t0, TIMER_TIMER1_STAT(s2)
+	sgtu	t2, t1, t0
+	bnez	t2, 1b
+	nop
+
+	/* Power back up */
+	li	t1, 1
+	sw	t1, AON_CTRL_HOST_MISC_CMDS(s0)
+	lw	t1, AON_CTRL_HOST_MISC_CMDS(s0)
+
+	sw	zero, AON_CTRL_PM_CTRL(s0)
+	lw	zero, AON_CTRL_PM_CTRL(s0)
+
+	/* Unlock I-cache */
+	addiu	t1, s3, -1
+	not	t1
+
+	la	t0, brcm_pm_do_s2
+	and 	t0, t1
+
+	la	t2, asm_end
+	and	t2, t1
+
+1:	cache	0x00, 0(t0)
+	bne	t0, t2, 1b
+	addu	t0, s3
+
+	/* Unlock interrupt vector */
+	move	t0, zero
+
+2:	move	t1, s4
+	cache 	0x00, 0(t1)
+	addu	t1, s3
+	addu	t0, s3
+	ble	t0, s5, 2b
+	nop
+
+	/* Restore cp0 sr */
+	sync
+	nop
+	mtc0	s6, CP0_STATUS
+	nop
+
+	/* Set return value to success */
+	li	v0, 0
+
+	/* Return to caller */
+	lw	s7, 32(sp)
+	lw	s6, 28(sp)
+	lw	s5, 24(sp)
+	lw	s4, 20(sp)
+	lw	s3, 16(sp)
+	lw	s2, 12(sp)
+	lw	s1, 8(sp)
+	lw	s0, 4(sp)
+	lw	ra, 0(sp)
+	addiu	sp, 64
+
+	jr ra
+	nop
+END(brcm_pm_do_s2)
+
+	.globl asm_end
+asm_end:
+	nop
+
diff --git a/drivers/soc/bcm/brcmstb/pm/s3-mips.S b/drivers/soc/bcm/brcmstb/pm/s3-mips.S
new file mode 100644
index 000000000..ecfcfd34c
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s3-mips.S
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 Broadcom Corporation
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/bmips.h>
+
+#include "pm.h"
+
+	.text
+	.set		noreorder
+	.align		5
+	.global		s3_reentry
+
+/*
+ * a0: AON_CTRL base register
+ * a1: D-Cache line size
+ */
+LEAF(brcm_pm_do_s3)
+
+	/* Get the address of s3_context */
+	la	t0, gp_regs
+	sw	ra, 0(t0)
+	sw	s0, 4(t0)
+	sw	s1, 8(t0)
+	sw	s2, 12(t0)
+	sw	s3, 16(t0)
+	sw	s4, 20(t0)
+	sw	s5, 24(t0)
+	sw	s6, 28(t0)
+	sw	s7, 32(t0)
+	sw	gp, 36(t0)
+	sw	sp, 40(t0)
+	sw	fp, 44(t0)
+
+	/* Save CP0 Status */
+	mfc0	t1, CP0_STATUS
+	sw	t1, 48(t0)
+
+	/* Write-back gp registers - cache will be gone */
+	addiu	t1, a1, -1
+	not	t1
+	and	t0, t1
+
+	/* Flush at least 64 bytes */
+	addiu	t2, t0, 64
+	and	t2, t1
+
+1:	cache	0x17, 0(t0)
+	bne	t0, t2, 1b
+	addu	t0, a1
+
+	/* Drop to deep standby */
+	li	t1, PM_WARM_CONFIG
+	sw	zero, AON_CTRL_PM_CTRL(a0)
+	lw	zero, AON_CTRL_PM_CTRL(a0)
+	sw	t1, AON_CTRL_PM_CTRL(a0)
+	lw	t1, AON_CTRL_PM_CTRL(a0)
+
+	li	t1, (PM_WARM_CONFIG | PM_PWR_DOWN)
+	sw	t1, AON_CTRL_PM_CTRL(a0)
+	lw	t1, AON_CTRL_PM_CTRL(a0)
+
+	/* Enable CP0 interrupt 2 and wait for interrupt */
+	mfc0	t0, CP0_STATUS
+
+	li	t1, ~(ST0_IM | ST0_IE)
+	and	t0, t1
+	ori	t0, STATUSF_IP2
+	mtc0	t0, CP0_STATUS
+	nop
+	nop
+	nop
+	ori	t0, ST0_IE
+	mtc0	t0, CP0_STATUS
+
+        /* Wait for interrupt */
+        wait
+        nop
+
+s3_reentry:
+
+	/* Clear call/return stack */
+	li	t0, (0x06 << 16)
+	mtc0	t0, $22, 2
+	ssnop
+	ssnop
+	ssnop
+
+	/* Clear jump target buffer */
+	li	t0, (0x04 << 16)
+	mtc0	t0, $22, 2
+	ssnop
+	ssnop
+	ssnop
+
+	sync
+	nop
+
+	/* Setup mmu defaults */
+	mtc0	zero, CP0_WIRED
+	mtc0	zero, CP0_ENTRYHI
+	li	k0, PM_DEFAULT_MASK
+	mtc0	k0, CP0_PAGEMASK
+
+	li	sp, BMIPS_WARM_RESTART_VEC
+	la	k0, plat_wired_tlb_setup
+	jalr	k0
+	nop
+
+	/* Restore general purpose registers */
+	la	t0, gp_regs
+	lw	fp, 44(t0)
+	lw	sp, 40(t0)
+	lw	gp, 36(t0)
+	lw	s7, 32(t0)
+	lw	s6, 28(t0)
+	lw	s5, 24(t0)
+	lw	s4, 20(t0)
+	lw	s3, 16(t0)
+	lw	s2, 12(t0)
+	lw	s1, 8(t0)
+	lw	s0, 4(t0)
+	lw	ra, 0(t0)
+
+	/* Restore CP0 status */
+	lw	t1, 48(t0)
+	mtc0	t1, CP0_STATUS
+
+	/* Return to caller */
+	li	v0, 0
+	jr      ra
+	nop
+
+END(brcm_pm_do_s3)