Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 698 insertions, 0 deletions

diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c
new file mode 100644
index 000000000..8c8352625
--- /dev/null
+++ b/drivers/spi/spi-at91-usart.c
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Driver for AT91 USART Controllers as SPI
+//
+// Copyright (C) 2018 Microchip Technology Inc.
+//
+// Author: Radu Pirea <radu.pirea@microchip.com>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/spi/spi.h>
+
+#define US_CR			0x00
+#define US_MR			0x04
+#define US_IER			0x08
+#define US_IDR			0x0C
+#define US_CSR			0x14
+#define US_RHR			0x18
+#define US_THR			0x1C
+#define US_BRGR			0x20
+#define US_VERSION		0xFC
+
+#define US_CR_RSTRX		BIT(2)
+#define US_CR_RSTTX		BIT(3)
+#define US_CR_RXEN		BIT(4)
+#define US_CR_RXDIS		BIT(5)
+#define US_CR_TXEN		BIT(6)
+#define US_CR_TXDIS		BIT(7)
+
+#define US_MR_SPI_MASTER	0x0E
+#define US_MR_CHRL		GENMASK(7, 6)
+#define US_MR_CPHA		BIT(8)
+#define US_MR_CPOL		BIT(16)
+#define US_MR_CLKO		BIT(18)
+#define US_MR_WRDBT		BIT(20)
+#define US_MR_LOOP		BIT(15)
+
+#define US_IR_RXRDY		BIT(0)
+#define US_IR_TXRDY		BIT(1)
+#define US_IR_OVRE		BIT(5)
+
+#define US_BRGR_SIZE		BIT(16)
+
+#define US_MIN_CLK_DIV		0x06
+#define US_MAX_CLK_DIV		BIT(16)
+
+#define US_RESET		(US_CR_RSTRX | US_CR_RSTTX)
+#define US_DISABLE		(US_CR_RXDIS | US_CR_TXDIS)
+#define US_ENABLE		(US_CR_RXEN | US_CR_TXEN)
+#define US_OVRE_RXRDY_IRQS	(US_IR_OVRE | US_IR_RXRDY)
+
+#define US_INIT \
+	(US_MR_SPI_MASTER | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
+#define US_DMA_MIN_BYTES       16
+#define US_DMA_TIMEOUT         (msecs_to_jiffies(1000))
+
+/* Register access macros */
+#define at91_usart_spi_readl(port, reg) \
+	readl_relaxed((port)->regs + US_##reg)
+#define at91_usart_spi_writel(port, reg, value) \
+	writel_relaxed((value), (port)->regs + US_##reg)
+
+#define at91_usart_spi_readb(port, reg) \
+	readb_relaxed((port)->regs + US_##reg)
+#define at91_usart_spi_writeb(port, reg, value) \
+	writeb_relaxed((value), (port)->regs + US_##reg)
+
+struct at91_usart_spi {
+	struct platform_device  *mpdev;
+	struct spi_transfer	*current_transfer;
+	void __iomem		*regs;
+	struct device		*dev;
+	struct clk		*clk;
+
+	struct completion	xfer_completion;
+
+	/*used in interrupt to protect data reading*/
+	spinlock_t		lock;
+
+	phys_addr_t		phybase;
+
+	int			irq;
+	unsigned int		current_tx_remaining_bytes;
+	unsigned int		current_rx_remaining_bytes;
+
+	u32			spi_clk;
+	u32			status;
+
+	bool			xfer_failed;
+	bool			use_dma;
+};
+
+static void dma_callback(void *data)
+{
+	struct spi_controller   *ctlr = data;
+	struct at91_usart_spi   *aus = spi_master_get_devdata(ctlr);
+
+	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
+	aus->current_rx_remaining_bytes = 0;
+	complete(&aus->xfer_completion);
+}
+
+static bool at91_usart_spi_can_dma(struct spi_controller *ctrl,
+				   struct spi_device *spi,
+				   struct spi_transfer *xfer)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
+
+	return aus->use_dma && xfer->len >= US_DMA_MIN_BYTES;
+}
+
+static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
+					struct at91_usart_spi *aus)
+{
+	struct dma_slave_config slave_config;
+	struct device *dev = &aus->mpdev->dev;
+	phys_addr_t phybase = aus->phybase;
+	dma_cap_mask_t mask;
+	int err = 0;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	ctlr->dma_tx = dma_request_chan(dev, "tx");
+	if (IS_ERR_OR_NULL(ctlr->dma_tx)) {
+		if (IS_ERR(ctlr->dma_tx)) {
+			err = PTR_ERR(ctlr->dma_tx);
+			goto at91_usart_spi_error_clear;
+		}
+
+		dev_dbg(dev,
+			"DMA TX channel not available, SPI unable to use DMA\n");
+		err = -EBUSY;
+		goto at91_usart_spi_error_clear;
+	}
+
+	ctlr->dma_rx = dma_request_chan(dev, "rx");
+	if (IS_ERR_OR_NULL(ctlr->dma_rx)) {
+		if (IS_ERR(ctlr->dma_rx)) {
+			err = PTR_ERR(ctlr->dma_rx);
+			goto at91_usart_spi_error;
+		}
+
+		dev_dbg(dev,
+			"DMA RX channel not available, SPI unable to use DMA\n");
+		err = -EBUSY;
+		goto at91_usart_spi_error;
+	}
+
+	slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	slave_config.dst_addr = (dma_addr_t)phybase + US_THR;
+	slave_config.src_addr = (dma_addr_t)phybase + US_RHR;
+	slave_config.src_maxburst = 1;
+	slave_config.dst_maxburst = 1;
+	slave_config.device_fc = false;
+
+	slave_config.direction = DMA_DEV_TO_MEM;
+	if (dmaengine_slave_config(ctlr->dma_rx, &slave_config)) {
+		dev_err(&ctlr->dev,
+			"failed to configure rx dma channel\n");
+		err = -EINVAL;
+		goto at91_usart_spi_error;
+	}
+
+	slave_config.direction = DMA_MEM_TO_DEV;
+	if (dmaengine_slave_config(ctlr->dma_tx, &slave_config)) {
+		dev_err(&ctlr->dev,
+			"failed to configure tx dma channel\n");
+		err = -EINVAL;
+		goto at91_usart_spi_error;
+	}
+
+	aus->use_dma = true;
+	return 0;
+
+at91_usart_spi_error:
+	if (!IS_ERR_OR_NULL(ctlr->dma_tx))
+		dma_release_channel(ctlr->dma_tx);
+	if (!IS_ERR_OR_NULL(ctlr->dma_rx))
+		dma_release_channel(ctlr->dma_rx);
+	ctlr->dma_tx = NULL;
+	ctlr->dma_rx = NULL;
+
+at91_usart_spi_error_clear:
+	return err;
+}
+
+static void at91_usart_spi_release_dma(struct spi_controller *ctlr)
+{
+	if (ctlr->dma_rx)
+		dma_release_channel(ctlr->dma_rx);
+	if (ctlr->dma_tx)
+		dma_release_channel(ctlr->dma_tx);
+}
+
+static void at91_usart_spi_stop_dma(struct spi_controller *ctlr)
+{
+	if (ctlr->dma_rx)
+		dmaengine_terminate_all(ctlr->dma_rx);
+	if (ctlr->dma_tx)
+		dmaengine_terminate_all(ctlr->dma_tx);
+}
+
+static int at91_usart_spi_dma_transfer(struct spi_controller *ctlr,
+				       struct spi_transfer *xfer)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct dma_chan	 *rxchan = ctlr->dma_rx;
+	struct dma_chan *txchan = ctlr->dma_tx;
+	struct dma_async_tx_descriptor *rxdesc;
+	struct dma_async_tx_descriptor *txdesc;
+	dma_cookie_t cookie;
+
+	/* Disable RX interrupt */
+	at91_usart_spi_writel(aus, IDR, US_IR_RXRDY);
+
+	rxdesc = dmaengine_prep_slave_sg(rxchan,
+					 xfer->rx_sg.sgl,
+					 xfer->rx_sg.nents,
+					 DMA_DEV_TO_MEM,
+					 DMA_PREP_INTERRUPT |
+					 DMA_CTRL_ACK);
+	if (!rxdesc)
+		goto at91_usart_spi_err_dma;
+
+	txdesc = dmaengine_prep_slave_sg(txchan,
+					 xfer->tx_sg.sgl,
+					 xfer->tx_sg.nents,
+					 DMA_MEM_TO_DEV,
+					 DMA_PREP_INTERRUPT |
+					 DMA_CTRL_ACK);
+	if (!txdesc)
+		goto at91_usart_spi_err_dma;
+
+	rxdesc->callback = dma_callback;
+	rxdesc->callback_param = ctlr;
+
+	cookie = rxdesc->tx_submit(rxdesc);
+	if (dma_submit_error(cookie))
+		goto at91_usart_spi_err_dma;
+
+	cookie = txdesc->tx_submit(txdesc);
+	if (dma_submit_error(cookie))
+		goto at91_usart_spi_err_dma;
+
+	rxchan->device->device_issue_pending(rxchan);
+	txchan->device->device_issue_pending(txchan);
+
+	return 0;
+
+at91_usart_spi_err_dma:
+	/* Enable RX interrupt if something fails and fallback to PIO */
+	at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
+	at91_usart_spi_stop_dma(ctlr);
+
+	return -ENOMEM;
+}
+
+static unsigned long at91_usart_spi_dma_timeout(struct at91_usart_spi *aus)
+{
+	return wait_for_completion_timeout(&aus->xfer_completion,
+					   US_DMA_TIMEOUT);
+}
+
+static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
+{
+	return aus->status & US_IR_TXRDY;
+}
+
+static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
+{
+	return aus->status & US_IR_RXRDY;
+}
+
+static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
+{
+	return aus->status & US_IR_OVRE;
+}
+
+static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
+{
+	aus->status = at91_usart_spi_readl(aus, CSR);
+	return aus->status;
+}
+
+static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
+{
+	unsigned int len = aus->current_transfer->len;
+	unsigned int remaining = aus->current_tx_remaining_bytes;
+	const u8  *tx_buf = aus->current_transfer->tx_buf;
+
+	if (!remaining)
+		return;
+
+	if (at91_usart_spi_tx_ready(aus)) {
+		at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
+		aus->current_tx_remaining_bytes--;
+	}
+}
+
+static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
+{
+	int len = aus->current_transfer->len;
+	int remaining = aus->current_rx_remaining_bytes;
+	u8  *rx_buf = aus->current_transfer->rx_buf;
+
+	if (!remaining)
+		return;
+
+	rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
+	aus->current_rx_remaining_bytes--;
+}
+
+static inline void
+at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
+			      struct spi_transfer *xfer)
+{
+	at91_usart_spi_writel(aus, BRGR,
+			      DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
+}
+
+static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
+{
+	struct spi_controller *controller = dev_id;
+	struct at91_usart_spi *aus = spi_master_get_devdata(controller);
+
+	spin_lock(&aus->lock);
+	at91_usart_spi_read_status(aus);
+
+	if (at91_usart_spi_check_overrun(aus)) {
+		aus->xfer_failed = true;
+		at91_usart_spi_writel(aus, IDR, US_IR_OVRE | US_IR_RXRDY);
+		spin_unlock(&aus->lock);
+		return IRQ_HANDLED;
+	}
+
+	if (at91_usart_spi_rx_ready(aus)) {
+		at91_usart_spi_rx(aus);
+		spin_unlock(&aus->lock);
+		return IRQ_HANDLED;
+	}
+
+	spin_unlock(&aus->lock);
+
+	return IRQ_NONE;
+}
+
+static int at91_usart_spi_setup(struct spi_device *spi)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller);
+	u32 *ausd = spi->controller_state;
+	unsigned int mr = at91_usart_spi_readl(aus, MR);
+
+	if (spi->mode & SPI_CPOL)
+		mr |= US_MR_CPOL;
+	else
+		mr &= ~US_MR_CPOL;
+
+	if (spi->mode & SPI_CPHA)
+		mr |= US_MR_CPHA;
+	else
+		mr &= ~US_MR_CPHA;
+
+	if (spi->mode & SPI_LOOP)
+		mr |= US_MR_LOOP;
+	else
+		mr &= ~US_MR_LOOP;
+
+	if (!ausd) {
+		ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
+		if (!ausd)
+			return -ENOMEM;
+
+		spi->controller_state = ausd;
+	}
+
+	*ausd = mr;
+
+	dev_dbg(&spi->dev,
+		"setup: bpw %u mode 0x%x -> mr %d %08x\n",
+		spi->bits_per_word, spi->mode, spi->chip_select, mr);
+
+	return 0;
+}
+
+static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
+				       struct spi_device *spi,
+				       struct spi_transfer *xfer)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	unsigned long dma_timeout = 0;
+	int ret = 0;
+
+	at91_usart_spi_set_xfer_speed(aus, xfer);
+	aus->xfer_failed = false;
+	aus->current_transfer = xfer;
+	aus->current_tx_remaining_bytes = xfer->len;
+	aus->current_rx_remaining_bytes = xfer->len;
+
+	while ((aus->current_tx_remaining_bytes ||
+		aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
+		reinit_completion(&aus->xfer_completion);
+		if (at91_usart_spi_can_dma(ctlr, spi, xfer) &&
+		    !ret) {
+			ret = at91_usart_spi_dma_transfer(ctlr, xfer);
+			if (ret)
+				continue;
+
+			dma_timeout = at91_usart_spi_dma_timeout(aus);
+
+			if (WARN_ON(dma_timeout == 0)) {
+				dev_err(&spi->dev, "DMA transfer timeout\n");
+				return -EIO;
+			}
+			aus->current_tx_remaining_bytes = 0;
+		} else {
+			at91_usart_spi_read_status(aus);
+			at91_usart_spi_tx(aus);
+		}
+
+		cpu_relax();
+	}
+
+	if (aus->xfer_failed) {
+		dev_err(aus->dev, "Overrun!\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
+					  struct spi_message *message)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct spi_device *spi = message->spi;
+	u32 *ausd = spi->controller_state;
+
+	at91_usart_spi_writel(aus, CR, US_ENABLE);
+	at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
+	at91_usart_spi_writel(aus, MR, *ausd);
+
+	return 0;
+}
+
+static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
+					    struct spi_message *message)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
+	at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
+
+	return 0;
+}
+
+static void at91_usart_spi_cleanup(struct spi_device *spi)
+{
+	struct at91_usart_spi_device *ausd = spi->controller_state;
+
+	spi->controller_state = NULL;
+	kfree(ausd);
+}
+
+static void at91_usart_spi_init(struct at91_usart_spi *aus)
+{
+	at91_usart_spi_writel(aus, MR, US_INIT);
+	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
+}
+
+static int at91_usart_gpio_setup(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.parent->of_node;
+	int i;
+	int ret;
+	int nb;
+
+	if (!np)
+		return -EINVAL;
+
+	nb = of_gpio_named_count(np, "cs-gpios");
+	for (i = 0; i < nb; i++) {
+		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
+
+		if (cs_gpio < 0)
+			return cs_gpio;
+
+		if (gpio_is_valid(cs_gpio)) {
+			ret = devm_gpio_request_one(&pdev->dev, cs_gpio,
+						    GPIOF_DIR_OUT,
+						    dev_name(&pdev->dev));
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int at91_usart_spi_probe(struct platform_device *pdev)
+{
+	struct resource *regs;
+	struct spi_controller *controller;
+	struct at91_usart_spi *aus;
+	struct clk *clk;
+	int irq;
+	int ret;
+
+	regs = platform_get_resource(to_platform_device(pdev->dev.parent),
+				     IORESOURCE_MEM, 0);
+	if (!regs)
+		return -EINVAL;
+
+	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
+	if (irq < 0)
+		return irq;
+
+	clk = devm_clk_get(pdev->dev.parent, "usart");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = -ENOMEM;
+	controller = spi_alloc_master(&pdev->dev, sizeof(*aus));
+	if (!controller)
+		goto at91_usart_spi_probe_fail;
+
+	ret = at91_usart_gpio_setup(pdev);
+	if (ret)
+		goto at91_usart_spi_probe_fail;
+
+	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
+	controller->dev.of_node = pdev->dev.parent->of_node;
+	controller->bits_per_word_mask = SPI_BPW_MASK(8);
+	controller->setup = at91_usart_spi_setup;
+	controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+	controller->transfer_one = at91_usart_spi_transfer_one;
+	controller->prepare_message = at91_usart_spi_prepare_message;
+	controller->unprepare_message = at91_usart_spi_unprepare_message;
+	controller->can_dma = at91_usart_spi_can_dma;
+	controller->cleanup = at91_usart_spi_cleanup;
+	controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
+						US_MIN_CLK_DIV);
+	controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
+						US_MAX_CLK_DIV);
+	platform_set_drvdata(pdev, controller);
+
+	aus = spi_master_get_devdata(controller);
+
+	aus->dev = &pdev->dev;
+	aus->regs = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(aus->regs)) {
+		ret = PTR_ERR(aus->regs);
+		goto at91_usart_spi_probe_fail;
+	}
+
+	aus->irq = irq;
+	aus->clk = clk;
+
+	ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
+			       dev_name(&pdev->dev), controller);
+	if (ret)
+		goto at91_usart_spi_probe_fail;
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		goto at91_usart_spi_probe_fail;
+
+	aus->spi_clk = clk_get_rate(clk);
+	at91_usart_spi_init(aus);
+
+	aus->phybase = regs->start;
+
+	aus->mpdev = to_platform_device(pdev->dev.parent);
+
+	ret = at91_usart_spi_configure_dma(controller, aus);
+	if (ret)
+		goto at91_usart_fail_dma;
+
+	spin_lock_init(&aus->lock);
+	init_completion(&aus->xfer_completion);
+
+	ret = devm_spi_register_master(&pdev->dev, controller);
+	if (ret)
+		goto at91_usart_fail_register_master;
+
+	dev_info(&pdev->dev,
+		 "AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
+		 at91_usart_spi_readl(aus, VERSION),
+		 &regs->start, irq);
+
+	return 0;
+
+at91_usart_fail_register_master:
+	at91_usart_spi_release_dma(controller);
+at91_usart_fail_dma:
+	clk_disable_unprepare(clk);
+at91_usart_spi_probe_fail:
+	spi_master_put(controller);
+	return ret;
+}
+
+__maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
+{
+	struct spi_controller *ctlr = dev_get_drvdata(dev);
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+	clk_disable_unprepare(aus->clk);
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+__maybe_unused static int at91_usart_spi_runtime_resume(struct device *dev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
+
+	pinctrl_pm_select_default_state(dev);
+
+	return clk_prepare_enable(aus->clk);
+}
+
+__maybe_unused static int at91_usart_spi_suspend(struct device *dev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	int ret;
+
+	ret = spi_controller_suspend(ctrl);
+	if (ret)
+		return ret;
+
+	if (!pm_runtime_suspended(dev))
+		at91_usart_spi_runtime_suspend(dev);
+
+	return 0;
+}
+
+__maybe_unused static int at91_usart_spi_resume(struct device *dev)
+{
+	struct spi_controller *ctrl = dev_get_drvdata(dev);
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
+	int ret;
+
+	if (!pm_runtime_suspended(dev)) {
+		ret = at91_usart_spi_runtime_resume(dev);
+		if (ret)
+			return ret;
+	}
+
+	at91_usart_spi_init(aus);
+
+	return spi_controller_resume(ctrl);
+}
+
+static int at91_usart_spi_remove(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr = platform_get_drvdata(pdev);
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+	at91_usart_spi_release_dma(ctlr);
+	clk_disable_unprepare(aus->clk);
+
+	return 0;
+}
+
+static const struct dev_pm_ops at91_usart_spi_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(at91_usart_spi_suspend, at91_usart_spi_resume)
+	SET_RUNTIME_PM_OPS(at91_usart_spi_runtime_suspend,
+			   at91_usart_spi_runtime_resume, NULL)
+};
+
+static struct platform_driver at91_usart_spi_driver = {
+	.driver = {
+		.name = "at91_usart_spi",
+		.pm = &at91_usart_spi_pm_ops,
+	},
+	.probe = at91_usart_spi_probe,
+	.remove = at91_usart_spi_remove,
+};
+
+module_platform_driver(at91_usart_spi_driver);
+
+MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
+MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:at91_usart_spi");