Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 855 insertions, 0 deletions

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
new file mode 100644
index 000000000..be259c685
--- /dev/null
+++ b/drivers/spi/spi-geni-qcom.c
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2018, The Linux foundation. All rights reserved.
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_runtime.h>
+#include <linux/qcom-geni-se.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+
+/* SPI SE specific registers and respective register fields */
+#define SE_SPI_CPHA		0x224
+#define CPHA			BIT(0)
+
+#define SE_SPI_LOOPBACK		0x22c
+#define LOOPBACK_ENABLE		0x1
+#define NORMAL_MODE		0x0
+#define LOOPBACK_MSK		GENMASK(1, 0)
+
+#define SE_SPI_CPOL		0x230
+#define CPOL			BIT(2)
+
+#define SE_SPI_DEMUX_OUTPUT_INV	0x24c
+#define CS_DEMUX_OUTPUT_INV_MSK	GENMASK(3, 0)
+
+#define SE_SPI_DEMUX_SEL	0x250
+#define CS_DEMUX_OUTPUT_SEL	GENMASK(3, 0)
+
+#define SE_SPI_TRANS_CFG	0x25c
+#define CS_TOGGLE		BIT(1)
+
+#define SE_SPI_WORD_LEN		0x268
+#define WORD_LEN_MSK		GENMASK(9, 0)
+#define MIN_WORD_LEN		4
+
+#define SE_SPI_TX_TRANS_LEN	0x26c
+#define SE_SPI_RX_TRANS_LEN	0x270
+#define TRANS_LEN_MSK		GENMASK(23, 0)
+
+#define SE_SPI_PRE_POST_CMD_DLY	0x274
+
+#define SE_SPI_DELAY_COUNTERS	0x278
+#define SPI_INTER_WORDS_DELAY_MSK	GENMASK(9, 0)
+#define SPI_CS_CLK_DELAY_MSK		GENMASK(19, 10)
+#define SPI_CS_CLK_DELAY_SHFT		10
+
+/* M_CMD OP codes for SPI */
+#define SPI_TX_ONLY		1
+#define SPI_RX_ONLY		2
+#define SPI_TX_RX		7
+#define SPI_CS_ASSERT		8
+#define SPI_CS_DEASSERT		9
+#define SPI_SCK_ONLY		10
+/* M_CMD params for SPI */
+#define SPI_PRE_CMD_DELAY	BIT(0)
+#define TIMESTAMP_BEFORE	BIT(1)
+#define FRAGMENTATION		BIT(2)
+#define TIMESTAMP_AFTER		BIT(3)
+#define POST_CMD_DELAY		BIT(4)
+
+struct spi_geni_master {
+	struct geni_se se;
+	struct device *dev;
+	u32 tx_fifo_depth;
+	u32 fifo_width_bits;
+	u32 tx_wm;
+	u32 last_mode;
+	unsigned long cur_speed_hz;
+	unsigned long cur_sclk_hz;
+	unsigned int cur_bits_per_word;
+	unsigned int tx_rem_bytes;
+	unsigned int rx_rem_bytes;
+	const struct spi_transfer *cur_xfer;
+	struct completion cs_done;
+	struct completion cancel_done;
+	struct completion abort_done;
+	unsigned int oversampling;
+	spinlock_t lock;
+	int irq;
+	bool cs_flag;
+	bool abort_failed;
+};
+
+static int get_spi_clk_cfg(unsigned int speed_hz,
+			struct spi_geni_master *mas,
+			unsigned int *clk_idx,
+			unsigned int *clk_div)
+{
+	unsigned long sclk_freq;
+	unsigned int actual_hz;
+	int ret;
+
+	ret = geni_se_clk_freq_match(&mas->se,
+				speed_hz * mas->oversampling,
+				clk_idx, &sclk_freq, false);
+	if (ret) {
+		dev_err(mas->dev, "Failed(%d) to find src clk for %dHz\n",
+							ret, speed_hz);
+		return ret;
+	}
+
+	*clk_div = DIV_ROUND_UP(sclk_freq, mas->oversampling * speed_hz);
+	actual_hz = sclk_freq / (mas->oversampling * *clk_div);
+
+	dev_dbg(mas->dev, "req %u=>%u sclk %lu, idx %d, div %d\n", speed_hz,
+				actual_hz, sclk_freq, *clk_idx, *clk_div);
+	ret = dev_pm_opp_set_rate(mas->dev, sclk_freq);
+	if (ret)
+		dev_err(mas->dev, "dev_pm_opp_set_rate failed %d\n", ret);
+	else
+		mas->cur_sclk_hz = sclk_freq;
+
+	return ret;
+}
+
+static void handle_fifo_timeout(struct spi_master *spi,
+				struct spi_message *msg)
+{
+	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	unsigned long time_left;
+	struct geni_se *se = &mas->se;
+
+	spin_lock_irq(&mas->lock);
+	reinit_completion(&mas->cancel_done);
+	writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+	mas->cur_xfer = NULL;
+	geni_se_cancel_m_cmd(se);
+	spin_unlock_irq(&mas->lock);
+
+	time_left = wait_for_completion_timeout(&mas->cancel_done, HZ);
+	if (time_left)
+		return;
+
+	spin_lock_irq(&mas->lock);
+	reinit_completion(&mas->abort_done);
+	geni_se_abort_m_cmd(se);
+	spin_unlock_irq(&mas->lock);
+
+	time_left = wait_for_completion_timeout(&mas->abort_done, HZ);
+	if (!time_left) {
+		dev_err(mas->dev, "Failed to cancel/abort m_cmd\n");
+
+		/*
+		 * No need for a lock since SPI core has a lock and we never
+		 * access this from an interrupt.
+		 */
+		mas->abort_failed = true;
+	}
+}
+
+static bool spi_geni_is_abort_still_pending(struct spi_geni_master *mas)
+{
+	struct geni_se *se = &mas->se;
+	u32 m_irq, m_irq_en;
+
+	if (!mas->abort_failed)
+		return false;
+
+	/*
+	 * The only known case where a transfer times out and then a cancel
+	 * times out then an abort times out is if something is blocking our
+	 * interrupt handler from running.  Avoid starting any new transfers
+	 * until that sorts itself out.
+	 */
+	spin_lock_irq(&mas->lock);
+	m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS);
+	m_irq_en = readl(se->base + SE_GENI_M_IRQ_EN);
+	spin_unlock_irq(&mas->lock);
+
+	if (m_irq & m_irq_en) {
+		dev_err(mas->dev, "Interrupts pending after abort: %#010x\n",
+			m_irq & m_irq_en);
+		return true;
+	}
+
+	/*
+	 * If we're here the problem resolved itself so no need to check more
+	 * on future transfers.
+	 */
+	mas->abort_failed = false;
+
+	return false;
+}
+
+static void spi_geni_set_cs(struct spi_device *slv, bool set_flag)
+{
+	struct spi_geni_master *mas = spi_master_get_devdata(slv->master);
+	struct spi_master *spi = dev_get_drvdata(mas->dev);
+	struct geni_se *se = &mas->se;
+	unsigned long time_left;
+
+	if (!(slv->mode & SPI_CS_HIGH))
+		set_flag = !set_flag;
+
+	if (set_flag == mas->cs_flag)
+		return;
+
+	pm_runtime_get_sync(mas->dev);
+
+	if (spi_geni_is_abort_still_pending(mas)) {
+		dev_err(mas->dev, "Can't set chip select\n");
+		goto exit;
+	}
+
+	mas->cs_flag = set_flag;
+
+	spin_lock_irq(&mas->lock);
+	reinit_completion(&mas->cs_done);
+	if (set_flag)
+		geni_se_setup_m_cmd(se, SPI_CS_ASSERT, 0);
+	else
+		geni_se_setup_m_cmd(se, SPI_CS_DEASSERT, 0);
+	spin_unlock_irq(&mas->lock);
+
+	time_left = wait_for_completion_timeout(&mas->cs_done, HZ);
+	if (!time_left)
+		handle_fifo_timeout(spi, NULL);
+
+exit:
+	pm_runtime_put(mas->dev);
+}
+
+static void spi_setup_word_len(struct spi_geni_master *mas, u16 mode,
+					unsigned int bits_per_word)
+{
+	unsigned int pack_words;
+	bool msb_first = (mode & SPI_LSB_FIRST) ? false : true;
+	struct geni_se *se = &mas->se;
+	u32 word_len;
+
+	/*
+	 * If bits_per_word isn't a byte aligned value, set the packing to be
+	 * 1 SPI word per FIFO word.
+	 */
+	if (!(mas->fifo_width_bits % bits_per_word))
+		pack_words = mas->fifo_width_bits / bits_per_word;
+	else
+		pack_words = 1;
+	geni_se_config_packing(&mas->se, bits_per_word, pack_words, msb_first,
+								true, true);
+	word_len = (bits_per_word - MIN_WORD_LEN) & WORD_LEN_MSK;
+	writel(word_len, se->base + SE_SPI_WORD_LEN);
+}
+
+static int geni_spi_set_clock_and_bw(struct spi_geni_master *mas,
+					unsigned long clk_hz)
+{
+	u32 clk_sel, m_clk_cfg, idx, div;
+	struct geni_se *se = &mas->se;
+	int ret;
+
+	if (clk_hz == mas->cur_speed_hz)
+		return 0;
+
+	ret = get_spi_clk_cfg(clk_hz, mas, &idx, &div);
+	if (ret) {
+		dev_err(mas->dev, "Err setting clk to %lu: %d\n", clk_hz, ret);
+		return ret;
+	}
+
+	/*
+	 * SPI core clock gets configured with the requested frequency
+	 * or the frequency closer to the requested frequency.
+	 * For that reason requested frequency is stored in the
+	 * cur_speed_hz and referred in the consecutive transfer instead
+	 * of calling clk_get_rate() API.
+	 */
+	mas->cur_speed_hz = clk_hz;
+
+	clk_sel = idx & CLK_SEL_MSK;
+	m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
+	writel(clk_sel, se->base + SE_GENI_CLK_SEL);
+	writel(m_clk_cfg, se->base + GENI_SER_M_CLK_CFG);
+
+	/* Set BW quota for CPU as driver supports FIFO mode only. */
+	se->icc_paths[CPU_TO_GENI].avg_bw = Bps_to_icc(mas->cur_speed_hz);
+	ret = geni_icc_set_bw(se);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int setup_fifo_params(struct spi_device *spi_slv,
+					struct spi_master *spi)
+{
+	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	struct geni_se *se = &mas->se;
+	u32 loopback_cfg = 0, cpol = 0, cpha = 0, demux_output_inv = 0;
+	u32 demux_sel;
+
+	if (mas->last_mode != spi_slv->mode) {
+		if (spi_slv->mode & SPI_LOOP)
+			loopback_cfg = LOOPBACK_ENABLE;
+
+		if (spi_slv->mode & SPI_CPOL)
+			cpol = CPOL;
+
+		if (spi_slv->mode & SPI_CPHA)
+			cpha = CPHA;
+
+		if (spi_slv->mode & SPI_CS_HIGH)
+			demux_output_inv = BIT(spi_slv->chip_select);
+
+		demux_sel = spi_slv->chip_select;
+		mas->cur_bits_per_word = spi_slv->bits_per_word;
+
+		spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
+		writel(loopback_cfg, se->base + SE_SPI_LOOPBACK);
+		writel(demux_sel, se->base + SE_SPI_DEMUX_SEL);
+		writel(cpha, se->base + SE_SPI_CPHA);
+		writel(cpol, se->base + SE_SPI_CPOL);
+		writel(demux_output_inv, se->base + SE_SPI_DEMUX_OUTPUT_INV);
+
+		mas->last_mode = spi_slv->mode;
+	}
+
+	return geni_spi_set_clock_and_bw(mas, spi_slv->max_speed_hz);
+}
+
+static int spi_geni_prepare_message(struct spi_master *spi,
+					struct spi_message *spi_msg)
+{
+	int ret;
+	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+	if (spi_geni_is_abort_still_pending(mas))
+		return -EBUSY;
+
+	ret = setup_fifo_params(spi_msg->spi, spi);
+	if (ret)
+		dev_err(mas->dev, "Couldn't select mode %d\n", ret);
+	return ret;
+}
+
+static int spi_geni_init(struct spi_geni_master *mas)
+{
+	struct geni_se *se = &mas->se;
+	unsigned int proto, major, minor, ver;
+	u32 spi_tx_cfg;
+
+	pm_runtime_get_sync(mas->dev);
+
+	proto = geni_se_read_proto(se);
+	if (proto != GENI_SE_SPI) {
+		dev_err(mas->dev, "Invalid proto %d\n", proto);
+		pm_runtime_put(mas->dev);
+		return -ENXIO;
+	}
+	mas->tx_fifo_depth = geni_se_get_tx_fifo_depth(se);
+
+	/* Width of Tx and Rx FIFO is same */
+	mas->fifo_width_bits = geni_se_get_tx_fifo_width(se);
+
+	/*
+	 * Hardware programming guide suggests to configure
+	 * RX FIFO RFR level to fifo_depth-2.
+	 */
+	geni_se_init(se, mas->tx_fifo_depth - 3, mas->tx_fifo_depth - 2);
+	/* Transmit an entire FIFO worth of data per IRQ */
+	mas->tx_wm = 1;
+	ver = geni_se_get_qup_hw_version(se);
+	major = GENI_SE_VERSION_MAJOR(ver);
+	minor = GENI_SE_VERSION_MINOR(ver);
+
+	if (major == 1 && minor == 0)
+		mas->oversampling = 2;
+	else
+		mas->oversampling = 1;
+
+	geni_se_select_mode(se, GENI_SE_FIFO);
+
+	/* We always control CS manually */
+	spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG);
+	spi_tx_cfg &= ~CS_TOGGLE;
+	writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG);
+
+	pm_runtime_put(mas->dev);
+	return 0;
+}
+
+static unsigned int geni_byte_per_fifo_word(struct spi_geni_master *mas)
+{
+	/*
+	 * Calculate how many bytes we'll put in each FIFO word.  If the
+	 * transfer words don't pack cleanly into a FIFO word we'll just put
+	 * one transfer word in each FIFO word.  If they do pack we'll pack 'em.
+	 */
+	if (mas->fifo_width_bits % mas->cur_bits_per_word)
+		return roundup_pow_of_two(DIV_ROUND_UP(mas->cur_bits_per_word,
+						       BITS_PER_BYTE));
+
+	return mas->fifo_width_bits / BITS_PER_BYTE;
+}
+
+static bool geni_spi_handle_tx(struct spi_geni_master *mas)
+{
+	struct geni_se *se = &mas->se;
+	unsigned int max_bytes;
+	const u8 *tx_buf;
+	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
+	unsigned int i = 0;
+
+	/* Stop the watermark IRQ if nothing to send */
+	if (!mas->cur_xfer) {
+		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+		return false;
+	}
+
+	max_bytes = (mas->tx_fifo_depth - mas->tx_wm) * bytes_per_fifo_word;
+	if (mas->tx_rem_bytes < max_bytes)
+		max_bytes = mas->tx_rem_bytes;
+
+	tx_buf = mas->cur_xfer->tx_buf + mas->cur_xfer->len - mas->tx_rem_bytes;
+	while (i < max_bytes) {
+		unsigned int j;
+		unsigned int bytes_to_write;
+		u32 fifo_word = 0;
+		u8 *fifo_byte = (u8 *)&fifo_word;
+
+		bytes_to_write = min(bytes_per_fifo_word, max_bytes - i);
+		for (j = 0; j < bytes_to_write; j++)
+			fifo_byte[j] = tx_buf[i++];
+		iowrite32_rep(se->base + SE_GENI_TX_FIFOn, &fifo_word, 1);
+	}
+	mas->tx_rem_bytes -= max_bytes;
+	if (!mas->tx_rem_bytes) {
+		writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+		return false;
+	}
+	return true;
+}
+
+static void geni_spi_handle_rx(struct spi_geni_master *mas)
+{
+	struct geni_se *se = &mas->se;
+	u32 rx_fifo_status;
+	unsigned int rx_bytes;
+	unsigned int rx_last_byte_valid;
+	u8 *rx_buf;
+	unsigned int bytes_per_fifo_word = geni_byte_per_fifo_word(mas);
+	unsigned int i = 0;
+
+	rx_fifo_status = readl(se->base + SE_GENI_RX_FIFO_STATUS);
+	rx_bytes = (rx_fifo_status & RX_FIFO_WC_MSK) * bytes_per_fifo_word;
+	if (rx_fifo_status & RX_LAST) {
+		rx_last_byte_valid = rx_fifo_status & RX_LAST_BYTE_VALID_MSK;
+		rx_last_byte_valid >>= RX_LAST_BYTE_VALID_SHFT;
+		if (rx_last_byte_valid && rx_last_byte_valid < 4)
+			rx_bytes -= bytes_per_fifo_word - rx_last_byte_valid;
+	}
+
+	/* Clear out the FIFO and bail if nowhere to put it */
+	if (!mas->cur_xfer) {
+		for (i = 0; i < DIV_ROUND_UP(rx_bytes, bytes_per_fifo_word); i++)
+			readl(se->base + SE_GENI_RX_FIFOn);
+		return;
+	}
+
+	if (mas->rx_rem_bytes < rx_bytes)
+		rx_bytes = mas->rx_rem_bytes;
+
+	rx_buf = mas->cur_xfer->rx_buf + mas->cur_xfer->len - mas->rx_rem_bytes;
+	while (i < rx_bytes) {
+		u32 fifo_word = 0;
+		u8 *fifo_byte = (u8 *)&fifo_word;
+		unsigned int bytes_to_read;
+		unsigned int j;
+
+		bytes_to_read = min(bytes_per_fifo_word, rx_bytes - i);
+		ioread32_rep(se->base + SE_GENI_RX_FIFOn, &fifo_word, 1);
+		for (j = 0; j < bytes_to_read; j++)
+			rx_buf[i++] = fifo_byte[j];
+	}
+	mas->rx_rem_bytes -= rx_bytes;
+}
+
+static void setup_fifo_xfer(struct spi_transfer *xfer,
+				struct spi_geni_master *mas,
+				u16 mode, struct spi_master *spi)
+{
+	u32 m_cmd = 0;
+	u32 len;
+	struct geni_se *se = &mas->se;
+	int ret;
+
+	/*
+	 * Ensure that our interrupt handler isn't still running from some
+	 * prior command before we start messing with the hardware behind
+	 * its back.  We don't need to _keep_ the lock here since we're only
+	 * worried about racing with out interrupt handler.  The SPI core
+	 * already handles making sure that we're not trying to do two
+	 * transfers at once or setting a chip select and doing a transfer
+	 * concurrently.
+	 *
+	 * NOTE: we actually _can't_ hold the lock here because possibly we
+	 * might call clk_set_rate() which needs to be able to sleep.
+	 */
+	spin_lock_irq(&mas->lock);
+	spin_unlock_irq(&mas->lock);
+
+	if (xfer->bits_per_word != mas->cur_bits_per_word) {
+		spi_setup_word_len(mas, mode, xfer->bits_per_word);
+		mas->cur_bits_per_word = xfer->bits_per_word;
+	}
+
+	/* Speed and bits per word can be overridden per transfer */
+	ret = geni_spi_set_clock_and_bw(mas, xfer->speed_hz);
+	if (ret)
+		return;
+
+	mas->tx_rem_bytes = 0;
+	mas->rx_rem_bytes = 0;
+
+	if (!(mas->cur_bits_per_word % MIN_WORD_LEN))
+		len = xfer->len * BITS_PER_BYTE / mas->cur_bits_per_word;
+	else
+		len = xfer->len / (mas->cur_bits_per_word / BITS_PER_BYTE + 1);
+	len &= TRANS_LEN_MSK;
+
+	mas->cur_xfer = xfer;
+	if (xfer->tx_buf) {
+		m_cmd |= SPI_TX_ONLY;
+		mas->tx_rem_bytes = xfer->len;
+		writel(len, se->base + SE_SPI_TX_TRANS_LEN);
+	}
+
+	if (xfer->rx_buf) {
+		m_cmd |= SPI_RX_ONLY;
+		writel(len, se->base + SE_SPI_RX_TRANS_LEN);
+		mas->rx_rem_bytes = xfer->len;
+	}
+
+	/*
+	 * Lock around right before we start the transfer since our
+	 * interrupt could come in at any time now.
+	 */
+	spin_lock_irq(&mas->lock);
+	geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION);
+
+	/*
+	 * TX_WATERMARK_REG should be set after SPI configuration and
+	 * setting up GENI SE engine, as driver starts data transfer
+	 * for the watermark interrupt.
+	 */
+	if (m_cmd & SPI_TX_ONLY) {
+		if (geni_spi_handle_tx(mas))
+			writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG);
+	}
+	spin_unlock_irq(&mas->lock);
+}
+
+static int spi_geni_transfer_one(struct spi_master *spi,
+				struct spi_device *slv,
+				struct spi_transfer *xfer)
+{
+	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+	if (spi_geni_is_abort_still_pending(mas))
+		return -EBUSY;
+
+	/* Terminate and return success for 0 byte length transfer */
+	if (!xfer->len)
+		return 0;
+
+	setup_fifo_xfer(xfer, mas, slv->mode, spi);
+	return 1;
+}
+
+static irqreturn_t geni_spi_isr(int irq, void *data)
+{
+	struct spi_master *spi = data;
+	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	struct geni_se *se = &mas->se;
+	u32 m_irq;
+
+	m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS);
+	if (!m_irq)
+		return IRQ_NONE;
+
+	if (m_irq & (M_CMD_OVERRUN_EN | M_ILLEGAL_CMD_EN | M_CMD_FAILURE_EN |
+		     M_RX_FIFO_RD_ERR_EN | M_RX_FIFO_WR_ERR_EN |
+		     M_TX_FIFO_RD_ERR_EN | M_TX_FIFO_WR_ERR_EN))
+		dev_warn(mas->dev, "Unexpected IRQ err status %#010x\n", m_irq);
+
+	spin_lock(&mas->lock);
+
+	if ((m_irq & M_RX_FIFO_WATERMARK_EN) || (m_irq & M_RX_FIFO_LAST_EN))
+		geni_spi_handle_rx(mas);
+
+	if (m_irq & M_TX_FIFO_WATERMARK_EN)
+		geni_spi_handle_tx(mas);
+
+	if (m_irq & M_CMD_DONE_EN) {
+		if (mas->cur_xfer) {
+			spi_finalize_current_transfer(spi);
+			mas->cur_xfer = NULL;
+			/*
+			 * If this happens, then a CMD_DONE came before all the
+			 * Tx buffer bytes were sent out. This is unusual, log
+			 * this condition and disable the WM interrupt to
+			 * prevent the system from stalling due an interrupt
+			 * storm.
+			 *
+			 * If this happens when all Rx bytes haven't been
+			 * received, log the condition. The only known time
+			 * this can happen is if bits_per_word != 8 and some
+			 * registers that expect xfer lengths in num spi_words
+			 * weren't written correctly.
+			 */
+			if (mas->tx_rem_bytes) {
+				writel(0, se->base + SE_GENI_TX_WATERMARK_REG);
+				dev_err(mas->dev, "Premature done. tx_rem = %d bpw%d\n",
+					mas->tx_rem_bytes, mas->cur_bits_per_word);
+			}
+			if (mas->rx_rem_bytes)
+				dev_err(mas->dev, "Premature done. rx_rem = %d bpw%d\n",
+					mas->rx_rem_bytes, mas->cur_bits_per_word);
+		} else {
+			complete(&mas->cs_done);
+		}
+	}
+
+	if (m_irq & M_CMD_CANCEL_EN)
+		complete(&mas->cancel_done);
+	if (m_irq & M_CMD_ABORT_EN)
+		complete(&mas->abort_done);
+
+	/*
+	 * It's safe or a good idea to Ack all of our our interrupts at the
+	 * end of the function. Specifically:
+	 * - M_CMD_DONE_EN / M_RX_FIFO_LAST_EN: Edge triggered interrupts and
+	 *   clearing Acks. Clearing at the end relies on nobody else having
+	 *   started a new transfer yet or else we could be clearing _their_
+	 *   done bit, but everyone grabs the spinlock before starting a new
+	 *   transfer.
+	 * - M_RX_FIFO_WATERMARK_EN / M_TX_FIFO_WATERMARK_EN: These appear
+	 *   to be "latched level" interrupts so it's important to clear them
+	 *   _after_ you've handled the condition and always safe to do so
+	 *   since they'll re-assert if they're still happening.
+	 */
+	writel(m_irq, se->base + SE_GENI_M_IRQ_CLEAR);
+
+	spin_unlock(&mas->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int spi_geni_probe(struct platform_device *pdev)
+{
+	int ret, irq;
+	struct spi_master *spi;
+	struct spi_geni_master *mas;
+	void __iomem *base;
+	struct clk *clk;
+	struct device *dev = &pdev->dev;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	clk = devm_clk_get(dev, "se");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	spi = devm_spi_alloc_master(dev, sizeof(*mas));
+	if (!spi)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, spi);
+	mas = spi_master_get_devdata(spi);
+	mas->irq = irq;
+	mas->dev = dev;
+	mas->se.dev = dev;
+	mas->se.wrapper = dev_get_drvdata(dev->parent);
+	mas->se.base = base;
+	mas->se.clk = clk;
+	mas->se.opp_table = dev_pm_opp_set_clkname(&pdev->dev, "se");
+	if (IS_ERR(mas->se.opp_table))
+		return PTR_ERR(mas->se.opp_table);
+	/* OPP table is optional */
+	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	if (ret && ret != -ENODEV) {
+		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
+		goto put_clkname;
+	}
+
+	spi->bus_num = -1;
+	spi->dev.of_node = dev->of_node;
+	spi->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
+	spi->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
+	spi->num_chipselect = 4;
+	spi->max_speed_hz = 50000000;
+	spi->prepare_message = spi_geni_prepare_message;
+	spi->transfer_one = spi_geni_transfer_one;
+	spi->auto_runtime_pm = true;
+	spi->handle_err = handle_fifo_timeout;
+	spi->set_cs = spi_geni_set_cs;
+
+	init_completion(&mas->cs_done);
+	init_completion(&mas->cancel_done);
+	init_completion(&mas->abort_done);
+	spin_lock_init(&mas->lock);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 250);
+	pm_runtime_enable(dev);
+
+	ret = geni_icc_get(&mas->se, NULL);
+	if (ret)
+		goto spi_geni_probe_runtime_disable;
+	/* Set the bus quota to a reasonable value for register access */
+	mas->se.icc_paths[GENI_TO_CORE].avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
+	mas->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;
+
+	ret = geni_icc_set_bw(&mas->se);
+	if (ret)
+		goto spi_geni_probe_runtime_disable;
+
+	ret = spi_geni_init(mas);
+	if (ret)
+		goto spi_geni_probe_runtime_disable;
+
+	ret = request_irq(mas->irq, geni_spi_isr, 0, dev_name(dev), spi);
+	if (ret)
+		goto spi_geni_probe_runtime_disable;
+
+	ret = spi_register_master(spi);
+	if (ret)
+		goto spi_geni_probe_free_irq;
+
+	return 0;
+spi_geni_probe_free_irq:
+	free_irq(mas->irq, spi);
+spi_geni_probe_runtime_disable:
+	pm_runtime_disable(dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
+put_clkname:
+	dev_pm_opp_put_clkname(mas->se.opp_table);
+	return ret;
+}
+
+static int spi_geni_remove(struct platform_device *pdev)
+{
+	struct spi_master *spi = platform_get_drvdata(pdev);
+	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+
+	/* Unregister _before_ disabling pm_runtime() so we stop transfers */
+	spi_unregister_master(spi);
+
+	free_irq(mas->irq, spi);
+	pm_runtime_disable(&pdev->dev);
+	dev_pm_opp_of_remove_table(&pdev->dev);
+	dev_pm_opp_put_clkname(mas->se.opp_table);
+	return 0;
+}
+
+static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
+{
+	struct spi_master *spi = dev_get_drvdata(dev);
+	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	int ret;
+
+	/* Drop the performance state vote */
+	dev_pm_opp_set_rate(dev, 0);
+
+	ret = geni_se_resources_off(&mas->se);
+	if (ret)
+		return ret;
+
+	return geni_icc_disable(&mas->se);
+}
+
+static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
+{
+	struct spi_master *spi = dev_get_drvdata(dev);
+	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	int ret;
+
+	ret = geni_icc_enable(&mas->se);
+	if (ret)
+		return ret;
+
+	ret = geni_se_resources_on(&mas->se);
+	if (ret)
+		return ret;
+
+	return dev_pm_opp_set_rate(mas->dev, mas->cur_sclk_hz);
+}
+
+static int __maybe_unused spi_geni_suspend(struct device *dev)
+{
+	struct spi_master *spi = dev_get_drvdata(dev);
+	int ret;
+
+	ret = spi_master_suspend(spi);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_force_suspend(dev);
+	if (ret)
+		spi_master_resume(spi);
+
+	return ret;
+}
+
+static int __maybe_unused spi_geni_resume(struct device *dev)
+{
+	struct spi_master *spi = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_force_resume(dev);
+	if (ret)
+		return ret;
+
+	ret = spi_master_resume(spi);
+	if (ret)
+		pm_runtime_force_suspend(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops spi_geni_pm_ops = {
+	SET_RUNTIME_PM_OPS(spi_geni_runtime_suspend,
+					spi_geni_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(spi_geni_suspend, spi_geni_resume)
+};
+
+static const struct of_device_id spi_geni_dt_match[] = {
+	{ .compatible = "qcom,geni-spi" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spi_geni_dt_match);
+
+static struct platform_driver spi_geni_driver = {
+	.probe  = spi_geni_probe,
+	.remove = spi_geni_remove,
+	.driver = {
+		.name = "geni_spi",
+		.pm = &spi_geni_pm_ops,
+		.of_match_table = spi_geni_dt_match,
+	},
+};
+module_platform_driver(spi_geni_driver);
+
+MODULE_DESCRIPTION("SPI driver for GENI based QUP cores");
+MODULE_LICENSE("GPL v2");