Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 128 insertions, 0 deletions

diff --git a/drivers/spi/spi-test.h b/drivers/spi/spi-test.h
new file mode 100644
index 000000000..5ddecf04a
--- /dev/null
+++ b/drivers/spi/spi-test.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  linux/drivers/spi/spi-test.h
+ *
+ *  (c) Martin Sperl <kernel@martin.sperl.org>
+ *
+ *  spi_test definitions
+ */
+
+#include <linux/spi/spi.h>
+
+#define SPI_TEST_MAX_TRANSFERS 4
+#define SPI_TEST_MAX_SIZE (32 * PAGE_SIZE)
+#define SPI_TEST_MAX_ITERATE 32
+
+/* the "dummy" start addresses used in spi_test
+ * these addresses get translated at a later stage
+ */
+#define RX_START	BIT(30)
+#define TX_START	BIT(31)
+#define RX(off)		((void *)(RX_START + off))
+#define TX(off)		((void *)(TX_START + off))
+
+/* some special defines for offsets */
+#define SPI_TEST_MAX_SIZE_HALF	BIT(29)
+
+/* detection pattern for unfinished reads...
+ * - 0x00 or 0xff could be valid levels for tx_buf = NULL,
+ * so we do not use either of them
+ */
+#define SPI_TEST_PATTERN_UNWRITTEN 0xAA
+#define SPI_TEST_PATTERN_DO_NOT_WRITE 0x55
+#define SPI_TEST_CHECK_DO_NOT_WRITE 64
+
+/**
+ * struct spi_test - describes a specific (set of) tests to execute
+ *
+ * @description:      description of the test
+ *
+ * @msg:              a template @spi_message usedfor the default settings
+ * @transfers:        array of @spi_transfers that are part of the
+ *                    resulting spi_message.
+ * @transfer_count:   number of transfers
+ *
+ * @run_test:         run a specific spi_test - this allows to override
+ *                    the default implementation of @spi_test_run_transfer
+ *                    either to add some custom filters for a specific test
+ *                    or to effectively run some very custom tests...
+ * @execute_msg:      run the spi_message for real - this allows to override
+ *                    @spi_test_execute_msg to apply final modifications
+ *                    on the spi_message
+ * @expected_return:  the expected return code - in some cases we want to
+ *                    test also for error conditions
+ *
+ * @iterate_len:      list of length to iterate on
+ * @iterate_tx_align: change the alignment of @spi_transfer.tx_buf
+ *                    for all values in the below range if set.
+ *                    the ranges are:
+ *                    [0 : @spi_master.dma_alignment[ if set
+ *                    [0 : iterate_tx_align[ if unset
+ * @iterate_rx_align: change the alignment of @spi_transfer.rx_buf
+ *                    see @iterate_tx_align for details
+ * @iterate_transfer_mask: the bitmask of transfers to which the iterations
+ *                         apply - if 0, then it applies to all transfer
+ *
+ * @fill_option:      define the way how tx_buf is filled
+ * @fill_pattern:     fill pattern to apply to the tx_buf
+ *                    (used in some of the @fill_options)
+ * @elapsed_time:     elapsed time in nanoseconds
+ */
+
+struct spi_test {
+	char description[64];
+	struct spi_message msg;
+	struct spi_transfer transfers[SPI_TEST_MAX_TRANSFERS];
+	unsigned int transfer_count;
+	int (*run_test)(struct spi_device *spi, struct spi_test *test,
+			void *tx, void *rx);
+	int (*execute_msg)(struct spi_device *spi, struct spi_test *test,
+			   void *tx, void *rx);
+	int expected_return;
+	/* iterate over all values, terminated by a -1 */
+	int iterate_len[SPI_TEST_MAX_ITERATE];
+	int iterate_tx_align;
+	int iterate_rx_align;
+	u32 iterate_transfer_mask;
+	/* the tx-fill operation */
+	u32 fill_option;
+#define FILL_MEMSET_8	0	/* just memset with 8 bit */
+#define FILL_MEMSET_16	1	/* just memset with 16 bit */
+#define FILL_MEMSET_24	2	/* just memset with 24 bit */
+#define FILL_MEMSET_32	3	/* just memset with 32 bit */
+#define FILL_COUNT_8	4	/* fill with a 8 byte counter */
+#define FILL_COUNT_16	5	/* fill with a 16 bit counter */
+#define FILL_COUNT_24	6	/* fill with a 24 bit counter */
+#define FILL_COUNT_32	7	/* fill with a 32 bit counter */
+#define FILL_TRANSFER_BYTE_8  8	/* fill with the transfer byte - 8 bit */
+#define FILL_TRANSFER_BYTE_16 9	/* fill with the transfer byte - 16 bit */
+#define FILL_TRANSFER_BYTE_24 10 /* fill with the transfer byte - 24 bit */
+#define FILL_TRANSFER_BYTE_32 11 /* fill with the transfer byte - 32 bit */
+#define FILL_TRANSFER_NUM     16 /* fill with the transfer number */
+	u32 fill_pattern;
+	unsigned long long elapsed_time;
+};
+
+/* default implementation for @spi_test.run_test */
+int spi_test_run_test(struct spi_device *spi,
+		      const struct spi_test *test,
+		      void *tx, void *rx);
+
+/* default implementation for @spi_test.execute_msg */
+int spi_test_execute_msg(struct spi_device *spi,
+			 struct spi_test *test,
+			 void *tx, void *rx);
+
+/* function to execute a set of tests */
+int spi_test_run_tests(struct spi_device *spi,
+		       struct spi_test *tests);
+
+#define ITERATE_LEN_LIST 0, 1, 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \
+		1021, 1024, 1031, 4093, PAGE_SIZE, 4099, 65536, 65537
+/* some of the default @spi_transfer.len to test, terminated by a -1 */
+#define ITERATE_LEN ITERATE_LEN_LIST, -1
+#define ITERATE_MAX_LEN ITERATE_LEN_LIST, (SPI_TEST_MAX_SIZE - 1), \
+		SPI_TEST_MAX_SIZE, -1
+
+/* the default alignment to test */
+#define ITERATE_ALIGN sizeof(int)