Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 285 insertions, 0 deletions

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
new file mode 100644
index 000000000..2a28a5af2
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include "tsens.h"
+
+#define CAL_MDEGC		30000
+
+#define CONFIG_ADDR		0x3640
+#define CONFIG_ADDR_8660	0x3620
+/* CONFIG_ADDR bitmasks */
+#define CONFIG			0x9b
+#define CONFIG_MASK		0xf
+#define CONFIG_8660		1
+#define CONFIG_SHIFT_8660	28
+#define CONFIG_MASK_8660	(3 << CONFIG_SHIFT_8660)
+
+#define STATUS_CNTL_ADDR_8064	0x3660
+#define CNTL_ADDR		0x3620
+/* CNTL_ADDR bitmasks */
+#define EN			BIT(0)
+#define SW_RST			BIT(1)
+#define SENSOR0_EN		BIT(3)
+#define SLP_CLK_ENA		BIT(26)
+#define SLP_CLK_ENA_8660	BIT(24)
+#define MEASURE_PERIOD		1
+#define SENSOR0_SHIFT		3
+
+/* INT_STATUS_ADDR bitmasks */
+#define MIN_STATUS_MASK		BIT(0)
+#define LOWER_STATUS_CLR	BIT(1)
+#define UPPER_STATUS_CLR	BIT(2)
+#define MAX_STATUS_MASK		BIT(3)
+
+#define THRESHOLD_ADDR		0x3624
+/* THRESHOLD_ADDR bitmasks */
+#define THRESHOLD_MAX_LIMIT_SHIFT	24
+#define THRESHOLD_MIN_LIMIT_SHIFT	16
+#define THRESHOLD_UPPER_LIMIT_SHIFT	8
+#define THRESHOLD_LOWER_LIMIT_SHIFT	0
+
+/* Initial temperature threshold values */
+#define LOWER_LIMIT_TH		0x50
+#define UPPER_LIMIT_TH		0xdf
+#define MIN_LIMIT_TH		0x0
+#define MAX_LIMIT_TH		0xff
+
+#define S0_STATUS_ADDR		0x3628
+#define INT_STATUS_ADDR		0x363c
+#define TRDY_MASK		BIT(7)
+#define TIMEOUT_US		100
+
+static int suspend_8960(struct tsens_priv *priv)
+{
+	int ret;
+	unsigned int mask;
+	struct regmap *map = priv->tm_map;
+
+	ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control);
+	if (ret)
+		return ret;
+
+	if (priv->num_sensors > 1)
+		mask = SLP_CLK_ENA | EN;
+	else
+		mask = SLP_CLK_ENA_8660 | EN;
+
+	ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int resume_8960(struct tsens_priv *priv)
+{
+	int ret;
+	struct regmap *map = priv->tm_map;
+
+	ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
+	if (ret)
+		return ret;
+
+	/*
+	 * Separate CONFIG restore is not needed only for 8660 as
+	 * config is part of CTRL Addr and its restored as such
+	 */
+	if (priv->num_sensors > 1) {
+		ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(map, CNTL_ADDR, priv->ctx.control);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int enable_8960(struct tsens_priv *priv, int id)
+{
+	int ret;
+	u32 reg, mask;
+
+	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);
+	if (ret)
+		return ret;
+
+	mask = BIT(id + SENSOR0_SHIFT);
+	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
+	if (ret)
+		return ret;
+
+	if (priv->num_sensors > 1)
+		reg |= mask | SLP_CLK_ENA | EN;
+	else
+		reg |= mask | SLP_CLK_ENA_8660 | EN;
+
+	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void disable_8960(struct tsens_priv *priv)
+{
+	int ret;
+	u32 reg_cntl;
+	u32 mask;
+
+	mask = GENMASK(priv->num_sensors - 1, 0);
+	mask <<= SENSOR0_SHIFT;
+	mask |= EN;
+
+	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg_cntl);
+	if (ret)
+		return;
+
+	reg_cntl &= ~mask;
+
+	if (priv->num_sensors > 1)
+		reg_cntl &= ~SLP_CLK_ENA;
+	else
+		reg_cntl &= ~SLP_CLK_ENA_8660;
+
+	regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
+}
+
+static int init_8960(struct tsens_priv *priv)
+{
+	int ret, i;
+	u32 reg_cntl;
+
+	priv->tm_map = dev_get_regmap(priv->dev, NULL);
+	if (!priv->tm_map)
+		return -ENODEV;
+
+	/*
+	 * The status registers for each sensor are discontiguous
+	 * because some SoCs have 5 sensors while others have more
+	 * but the control registers stay in the same place, i.e
+	 * directly after the first 5 status registers.
+	 */
+	for (i = 0; i < priv->num_sensors; i++) {
+		if (i >= 5)
+			priv->sensor[i].status = S0_STATUS_ADDR + 40;
+		priv->sensor[i].status += i * 4;
+	}
+
+	reg_cntl = SW_RST;
+	ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
+	if (ret)
+		return ret;
+
+	if (priv->num_sensors > 1) {
+		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
+		reg_cntl &= ~SW_RST;
+		ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
+					 CONFIG_MASK, CONFIG);
+	} else {
+		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
+		reg_cntl &= ~CONFIG_MASK_8660;
+		reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
+	}
+
+	reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
+	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
+	if (ret)
+		return ret;
+
+	reg_cntl |= EN;
+	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int calibrate_8960(struct tsens_priv *priv)
+{
+	int i;
+	char *data;
+
+	ssize_t num_read = priv->num_sensors;
+	struct tsens_sensor *s = priv->sensor;
+
+	data = qfprom_read(priv->dev, "calib");
+	if (IS_ERR(data))
+		data = qfprom_read(priv->dev, "calib_backup");
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	for (i = 0; i < num_read; i++, s++)
+		s->offset = data[i];
+
+	kfree(data);
+
+	return 0;
+}
+
+/* Temperature on y axis and ADC-code on x-axis */
+static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
+{
+	int slope, offset;
+
+	slope = thermal_zone_get_slope(s->tzd);
+	offset = CAL_MDEGC - slope * s->offset;
+
+	return adc_code * slope + offset;
+}
+
+static int get_temp_8960(const struct tsens_sensor *s, int *temp)
+{
+	int ret;
+	u32 code, trdy;
+	struct tsens_priv *priv = s->priv;
+	unsigned long timeout;
+
+	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+	do {
+		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
+		if (ret)
+			return ret;
+		if (!(trdy & TRDY_MASK))
+			continue;
+		ret = regmap_read(priv->tm_map, s->status, &code);
+		if (ret)
+			return ret;
+		*temp = code_to_mdegC(code, s);
+		return 0;
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static const struct tsens_ops ops_8960 = {
+	.init		= init_8960,
+	.calibrate	= calibrate_8960,
+	.get_temp	= get_temp_8960,
+	.enable		= enable_8960,
+	.disable	= disable_8960,
+	.suspend	= suspend_8960,
+	.resume		= resume_8960,
+};
+
+struct tsens_plat_data data_8960 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8960,
+};