Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 1426 insertions, 0 deletions

diff --git a/drivers/thermal/st/Kconfig b/drivers/thermal/st/Kconfig
new file mode 100644
index 000000000..58ece3819
--- /dev/null
+++ b/drivers/thermal/st/Kconfig
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# STMicroelectronics thermal drivers configuration
+#
+
+config ST_THERMAL
+	tristate "Thermal sensors on STMicroelectronics STi series of SoCs"
+	help
+	  Support for thermal sensors on STMicroelectronics STi series of SoCs.
+
+config ST_THERMAL_SYSCFG
+	select ST_THERMAL
+	tristate "STi series syscfg register access based thermal sensors"
+
+config ST_THERMAL_MEMMAP
+	select ST_THERMAL
+	tristate "STi series memory mapped access based thermal sensors"
+
+config STM32_THERMAL
+	tristate "Thermal framework support on STMicroelectronics STM32 series of SoCs"
+	depends on MACH_STM32MP157
+	default y
+	help
+	  Support for thermal framework on STMicroelectronics STM32 series of
+	  SoCs. This thermal driver allows to access to general thermal framework
+	  functionalities and to access to SoC sensor functionalities. This
+	  configuration is fully dependent of MACH_STM32MP157.
diff --git a/drivers/thermal/st/Makefile b/drivers/thermal/st/Makefile
new file mode 100644
index 000000000..c4cfa3c4a
--- /dev/null
+++ b/drivers/thermal/st/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ST_THERMAL)		:= st_thermal.o
+obj-$(CONFIG_ST_THERMAL_SYSCFG)		+= st_thermal_syscfg.o
+obj-$(CONFIG_ST_THERMAL_MEMMAP)		+= st_thermal_memmap.o
+obj-$(CONFIG_STM32_THERMAL)		+= stm_thermal.o
diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
new file mode 100644
index 000000000..1276b9560
--- /dev/null
+++ b/drivers/thermal/st/st_thermal.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ST Thermal Sensor Driver core routines
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "st_thermal.h"
+
+/* The Thermal Framework expects millidegrees */
+#define mcelsius(temp)			((temp) * 1000)
+
+/*
+ * Function to allocate regfields which are common
+ * between syscfg and memory mapped based sensors
+ */
+static int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct regmap *regmap = sensor->regmap;
+	const struct reg_field *reg_fields = sensor->cdata->reg_fields;
+
+	sensor->dcorrect = devm_regmap_field_alloc(dev, regmap,
+						   reg_fields[DCORRECT]);
+
+	sensor->overflow = devm_regmap_field_alloc(dev, regmap,
+						   reg_fields[OVERFLOW]);
+
+	sensor->temp_data = devm_regmap_field_alloc(dev, regmap,
+						    reg_fields[DATA]);
+
+	if (IS_ERR(sensor->dcorrect) ||
+	    IS_ERR(sensor->overflow) ||
+	    IS_ERR(sensor->temp_data)) {
+		dev_err(dev, "failed to allocate common regfields\n");
+		return -EINVAL;
+	}
+
+	return sensor->ops->alloc_regfields(sensor);
+}
+
+static int st_thermal_sensor_on(struct st_thermal_sensor *sensor)
+{
+	int ret;
+	struct device *dev = sensor->dev;
+
+	ret = clk_prepare_enable(sensor->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clk\n");
+		return ret;
+	}
+
+	ret = sensor->ops->power_ctrl(sensor, POWER_ON);
+	if (ret) {
+		dev_err(dev, "failed to power on sensor\n");
+		clk_disable_unprepare(sensor->clk);
+	}
+
+	return ret;
+}
+
+static int st_thermal_sensor_off(struct st_thermal_sensor *sensor)
+{
+	int ret;
+
+	ret = sensor->ops->power_ctrl(sensor, POWER_OFF);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(sensor->clk);
+
+	return 0;
+}
+
+static int st_thermal_calibration(struct st_thermal_sensor *sensor)
+{
+	int ret;
+	unsigned int val;
+	struct device *dev = sensor->dev;
+
+	/* Check if sensor calibration data is already written */
+	ret = regmap_field_read(sensor->dcorrect, &val);
+	if (ret) {
+		dev_err(dev, "failed to read calibration data\n");
+		return ret;
+	}
+
+	if (!val) {
+		/*
+		 * Sensor calibration value not set by bootloader,
+		 * default calibration data to be used
+		 */
+		ret = regmap_field_write(sensor->dcorrect,
+					 sensor->cdata->calibration_val);
+		if (ret)
+			dev_err(dev, "failed to set calibration data\n");
+	}
+
+	return ret;
+}
+
+/* Callback to get temperature from HW*/
+static int st_thermal_get_temp(struct thermal_zone_device *th, int *temperature)
+{
+	struct st_thermal_sensor *sensor = th->devdata;
+	struct device *dev = sensor->dev;
+	unsigned int temp;
+	unsigned int overflow;
+	int ret;
+
+	ret = regmap_field_read(sensor->overflow, &overflow);
+	if (ret)
+		return ret;
+	if (overflow)
+		return -EIO;
+
+	ret = regmap_field_read(sensor->temp_data, &temp);
+	if (ret)
+		return ret;
+
+	temp += sensor->cdata->temp_adjust_val;
+	temp = mcelsius(temp);
+
+	dev_dbg(dev, "temperature: %d\n", temp);
+
+	*temperature = temp;
+
+	return 0;
+}
+
+static int st_thermal_get_trip_type(struct thermal_zone_device *th,
+				int trip, enum thermal_trip_type *type)
+{
+	struct st_thermal_sensor *sensor = th->devdata;
+	struct device *dev = sensor->dev;
+
+	switch (trip) {
+	case 0:
+		*type = THERMAL_TRIP_CRITICAL;
+		break;
+	default:
+		dev_err(dev, "invalid trip point\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
+				    int trip, int *temp)
+{
+	struct st_thermal_sensor *sensor = th->devdata;
+	struct device *dev = sensor->dev;
+
+	switch (trip) {
+	case 0:
+		*temp = mcelsius(sensor->cdata->crit_temp);
+		break;
+	default:
+		dev_err(dev, "Invalid trip point\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops st_tz_ops = {
+	.get_temp	= st_thermal_get_temp,
+	.get_trip_type	= st_thermal_get_trip_type,
+	.get_trip_temp	= st_thermal_get_trip_temp,
+};
+
+int st_thermal_register(struct platform_device *pdev,
+			const struct of_device_id *st_thermal_of_match)
+{
+	struct st_thermal_sensor *sensor;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct of_device_id *match;
+
+	int polling_delay;
+	int ret;
+
+	if (!np) {
+		dev_err(dev, "device tree node not found\n");
+		return -EINVAL;
+	}
+
+	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
+	if (!sensor)
+		return -ENOMEM;
+
+	sensor->dev = dev;
+
+	match = of_match_device(st_thermal_of_match, dev);
+	if (!(match && match->data))
+		return -EINVAL;
+
+	sensor->cdata = match->data;
+	if (!sensor->cdata->ops)
+		return -EINVAL;
+
+	sensor->ops = sensor->cdata->ops;
+
+	ret = (sensor->ops->regmap_init)(sensor);
+	if (ret)
+		return ret;
+
+	ret = st_thermal_alloc_regfields(sensor);
+	if (ret)
+		return ret;
+
+	sensor->clk = devm_clk_get(dev, "thermal");
+	if (IS_ERR(sensor->clk)) {
+		dev_err(dev, "failed to fetch clock\n");
+		return PTR_ERR(sensor->clk);
+	}
+
+	if (sensor->ops->register_enable_irq) {
+		ret = sensor->ops->register_enable_irq(sensor);
+		if (ret)
+			return ret;
+	}
+
+	ret = st_thermal_sensor_on(sensor);
+	if (ret)
+		return ret;
+
+	ret = st_thermal_calibration(sensor);
+	if (ret)
+		goto sensor_off;
+
+	polling_delay = sensor->ops->register_enable_irq ? 0 : 1000;
+
+	sensor->thermal_dev =
+		thermal_zone_device_register(dev_name(dev), 1, 0, sensor,
+					     &st_tz_ops, NULL, 0, polling_delay);
+	if (IS_ERR(sensor->thermal_dev)) {
+		dev_err(dev, "failed to register thermal zone device\n");
+		ret = PTR_ERR(sensor->thermal_dev);
+		goto sensor_off;
+	}
+	ret = thermal_zone_device_enable(sensor->thermal_dev);
+	if (ret)
+		goto tzd_unregister;
+
+	platform_set_drvdata(pdev, sensor);
+
+	return 0;
+
+tzd_unregister:
+	thermal_zone_device_unregister(sensor->thermal_dev);
+sensor_off:
+	st_thermal_sensor_off(sensor);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(st_thermal_register);
+
+int st_thermal_unregister(struct platform_device *pdev)
+{
+	struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+	st_thermal_sensor_off(sensor);
+	thermal_zone_device_unregister(sensor->thermal_dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_thermal_unregister);
+
+#ifdef CONFIG_PM_SLEEP
+static int st_thermal_suspend(struct device *dev)
+{
+	struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
+
+	return st_thermal_sensor_off(sensor);
+}
+
+static int st_thermal_resume(struct device *dev)
+{
+	int ret;
+	struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
+
+	ret = st_thermal_sensor_on(sensor);
+	if (ret)
+		return ret;
+
+	ret = st_thermal_calibration(sensor);
+	if (ret)
+		return ret;
+
+	if (sensor->ops->enable_irq) {
+		ret = sensor->ops->enable_irq(sensor);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume);
+EXPORT_SYMBOL_GPL(st_thermal_pm_ops);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/st_thermal.h b/drivers/thermal/st/st_thermal.h
new file mode 100644
index 000000000..d661b2f2e
--- /dev/null
+++ b/drivers/thermal/st/st_thermal.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ST Thermal Sensor Driver for STi series of SoCs
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ */
+
+#ifndef __STI_THERMAL_SYSCFG_H
+#define __STI_THERMAL_SYSCFG_H
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+
+enum st_thermal_regfield_ids {
+	INT_THRESH_HI = 0, /* Top two regfield IDs are mutually exclusive */
+	TEMP_PWR = 0,
+	DCORRECT,
+	OVERFLOW,
+	DATA,
+	INT_ENABLE,
+
+	MAX_REGFIELDS
+};
+
+/* Thermal sensor power states */
+enum st_thermal_power_state {
+	POWER_OFF = 0,
+	POWER_ON
+};
+
+struct st_thermal_sensor;
+
+/**
+ * Description of private thermal sensor ops.
+ *
+ * @power_ctrl:		Function for powering on/off a sensor. Clock to the
+ *			sensor is also controlled from this function.
+ * @alloc_regfields: 	Allocate regmap register fields, specific to a sensor.
+ * @do_memmap_regmap: 	Memory map the thermal register space and init regmap
+ *			instance or find regmap instance.
+ * @register_irq: 	Register an interrupt handler for a sensor.
+ */
+struct st_thermal_sensor_ops {
+	int (*power_ctrl)(struct st_thermal_sensor *, enum st_thermal_power_state);
+	int (*alloc_regfields)(struct st_thermal_sensor *);
+	int (*regmap_init)(struct st_thermal_sensor *);
+	int (*register_enable_irq)(struct st_thermal_sensor *);
+	int (*enable_irq)(struct st_thermal_sensor *);
+};
+
+/**
+ * Description of thermal driver compatible data.
+ *
+ * @reg_fields:		Pointer to the regfields array for a sensor.
+ * @sys_compat:		Pointer to the syscon node compatible string.
+ * @ops: 		Pointer to private thermal ops for a sensor.
+ * @calibration_val: 	Default calibration value to be written to the DCORRECT
+ *			register field for a sensor.
+ * @temp_adjust_val: 	Value to be added/subtracted from the data read from
+ *			the sensor. If value needs to be added please provide a
+ *			positive value and if it is to be subtracted please
+ * 			provide a negative value.
+ * @crit_temp: 		The temperature beyond which the SoC should be shutdown
+ * 			to prevent damage.
+ */
+struct st_thermal_compat_data {
+	char *sys_compat;
+	const struct reg_field *reg_fields;
+	const struct st_thermal_sensor_ops *ops;
+	unsigned int calibration_val;
+	int temp_adjust_val;
+	int crit_temp;
+};
+
+struct st_thermal_sensor {
+	struct device *dev;
+	struct thermal_zone_device *thermal_dev;
+	const struct st_thermal_sensor_ops *ops;
+	const struct st_thermal_compat_data *cdata;
+	struct clk *clk;
+	struct regmap *regmap;
+	struct regmap_field *pwr;
+	struct regmap_field *dcorrect;
+	struct regmap_field *overflow;
+	struct regmap_field *temp_data;
+	struct regmap_field *int_thresh_hi;
+	struct regmap_field *int_enable;
+	int irq;
+	void __iomem *mmio_base;
+};
+
+extern int st_thermal_register(struct platform_device *pdev,
+			       const struct of_device_id *st_thermal_of_match);
+extern int st_thermal_unregister(struct platform_device *pdev);
+extern const struct dev_pm_ops st_thermal_pm_ops;
+
+#endif /* __STI_RESET_SYSCFG_H */
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
new file mode 100644
index 000000000..a0114452d
--- /dev/null
+++ b/drivers/thermal/st/st_thermal_memmap.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ST Thermal Sensor Driver for memory mapped sensors.
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+
+#include "st_thermal.h"
+
+#define STIH416_MPE_CONF			0x0
+#define STIH416_MPE_STATUS			0x4
+#define STIH416_MPE_INT_THRESH			0x8
+#define STIH416_MPE_INT_EN			0xC
+
+/* Power control bits for the memory mapped thermal sensor */
+#define THERMAL_PDN				BIT(4)
+#define THERMAL_SRSTN				BIT(10)
+
+static const struct reg_field st_mmap_thermal_regfields[MAX_REGFIELDS] = {
+	/*
+	 * According to the STIH416 MPE temp sensor data sheet -
+	 * the PDN (Power Down Bit) and SRSTN (Soft Reset Bit) need to be
+	 * written simultaneously for powering on and off the temperature
+	 * sensor. regmap_update_bits() will be used to update the register.
+	 */
+	[INT_THRESH_HI]	= REG_FIELD(STIH416_MPE_INT_THRESH, 	0,  7),
+	[DCORRECT]	= REG_FIELD(STIH416_MPE_CONF,		5,  9),
+	[OVERFLOW]	= REG_FIELD(STIH416_MPE_STATUS,		9,  9),
+	[DATA]		= REG_FIELD(STIH416_MPE_STATUS,		11, 18),
+	[INT_ENABLE]	= REG_FIELD(STIH416_MPE_INT_EN,		0,  0),
+};
+
+static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata)
+{
+	struct st_thermal_sensor *sensor = sdata;
+
+	thermal_zone_device_update(sensor->thermal_dev,
+				   THERMAL_EVENT_UNSPECIFIED);
+
+	return IRQ_HANDLED;
+}
+
+/* Private ops for the Memory Mapped based thermal sensors */
+static int st_mmap_power_ctrl(struct st_thermal_sensor *sensor,
+			      enum st_thermal_power_state power_state)
+{
+	const unsigned int mask = (THERMAL_PDN | THERMAL_SRSTN);
+	const unsigned int val = power_state ? mask : 0;
+
+	return regmap_update_bits(sensor->regmap, STIH416_MPE_CONF, mask, val);
+}
+
+static int st_mmap_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct regmap *regmap = sensor->regmap;
+	const struct reg_field *reg_fields = sensor->cdata->reg_fields;
+
+	sensor->int_thresh_hi = devm_regmap_field_alloc(dev, regmap,
+						reg_fields[INT_THRESH_HI]);
+	sensor->int_enable = devm_regmap_field_alloc(dev, regmap,
+						reg_fields[INT_ENABLE]);
+
+	if (IS_ERR(sensor->int_thresh_hi) || IS_ERR(sensor->int_enable)) {
+		dev_err(dev, "failed to alloc mmap regfields\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int st_mmap_enable_irq(struct st_thermal_sensor *sensor)
+{
+	int ret;
+
+	/* Set upper critical threshold */
+	ret = regmap_field_write(sensor->int_thresh_hi,
+				 sensor->cdata->crit_temp -
+				 sensor->cdata->temp_adjust_val);
+	if (ret)
+		return ret;
+
+	return regmap_field_write(sensor->int_enable, 1);
+}
+
+static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	int ret;
+
+	sensor->irq = platform_get_irq(pdev, 0);
+	if (sensor->irq < 0)
+		return sensor->irq;
+
+	ret = devm_request_threaded_irq(dev, sensor->irq,
+					NULL, st_mmap_thermal_trip_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					dev->driver->name, sensor);
+	if (ret) {
+		dev_err(dev, "failed to register IRQ %d\n", sensor->irq);
+		return ret;
+	}
+
+	return st_mmap_enable_irq(sensor);
+}
+
+static const struct regmap_config st_416mpe_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int st_mmap_regmap_init(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "no memory resources defined\n");
+		return -ENODEV;
+	}
+
+	sensor->mmio_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(sensor->mmio_base)) {
+		dev_err(dev, "failed to remap IO\n");
+		return PTR_ERR(sensor->mmio_base);
+	}
+
+	sensor->regmap = devm_regmap_init_mmio(dev, sensor->mmio_base,
+				&st_416mpe_regmap_config);
+	if (IS_ERR(sensor->regmap)) {
+		dev_err(dev, "failed to initialise regmap\n");
+		return PTR_ERR(sensor->regmap);
+	}
+
+	return 0;
+}
+
+static const struct st_thermal_sensor_ops st_mmap_sensor_ops = {
+	.power_ctrl		= st_mmap_power_ctrl,
+	.alloc_regfields	= st_mmap_alloc_regfields,
+	.regmap_init		= st_mmap_regmap_init,
+	.register_enable_irq	= st_mmap_register_enable_irq,
+	.enable_irq		= st_mmap_enable_irq,
+};
+
+/* Compatible device data stih416 mpe thermal sensor */
+static const struct st_thermal_compat_data st_416mpe_cdata = {
+	.reg_fields		= st_mmap_thermal_regfields,
+	.ops			= &st_mmap_sensor_ops,
+	.calibration_val	= 14,
+	.temp_adjust_val	= -95,
+	.crit_temp		= 120,
+};
+
+/* Compatible device data stih407 thermal sensor */
+static const struct st_thermal_compat_data st_407_cdata = {
+	.reg_fields		= st_mmap_thermal_regfields,
+	.ops			= &st_mmap_sensor_ops,
+	.calibration_val	= 16,
+	.temp_adjust_val	= -95,
+	.crit_temp		= 120,
+};
+
+static const struct of_device_id st_mmap_thermal_of_match[] = {
+	{ .compatible = "st,stih416-mpe-thermal", .data = &st_416mpe_cdata },
+	{ .compatible = "st,stih407-thermal",     .data = &st_407_cdata },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_mmap_thermal_of_match);
+
+static int st_mmap_probe(struct platform_device *pdev)
+{
+	return st_thermal_register(pdev,  st_mmap_thermal_of_match);
+}
+
+static int st_mmap_remove(struct platform_device *pdev)
+{
+	return st_thermal_unregister(pdev);
+}
+
+static struct platform_driver st_mmap_thermal_driver = {
+	.driver = {
+		.name	= "st_thermal_mmap",
+		.pm     = &st_thermal_pm_ops,
+		.of_match_table = st_mmap_thermal_of_match,
+	},
+	.probe		= st_mmap_probe,
+	.remove		= st_mmap_remove,
+};
+
+module_platform_driver(st_mmap_thermal_driver);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/st_thermal_syscfg.c b/drivers/thermal/st/st_thermal_syscfg.c
new file mode 100644
index 000000000..94efecf35
--- /dev/null
+++ b/drivers/thermal/st/st_thermal_syscfg.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ST Thermal Sensor Driver for syscfg based sensors.
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *
+ * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+
+#include "st_thermal.h"
+
+/* STiH415 */
+#define STIH415_SYSCFG_FRONT(num)		((num - 100) * 4)
+#define STIH415_SAS_THSENS_CONF			STIH415_SYSCFG_FRONT(178)
+#define STIH415_SAS_THSENS_STATUS		STIH415_SYSCFG_FRONT(198)
+#define STIH415_SYSCFG_MPE(num)			((num - 600) * 4)
+#define STIH415_MPE_THSENS_CONF			STIH415_SYSCFG_MPE(607)
+#define STIH415_MPE_THSENS_STATUS		STIH415_SYSCFG_MPE(667)
+
+/* STiH416 */
+#define STIH416_SYSCFG_FRONT(num)		((num - 1000) * 4)
+#define STIH416_SAS_THSENS_CONF			STIH416_SYSCFG_FRONT(1552)
+#define STIH416_SAS_THSENS_STATUS1		STIH416_SYSCFG_FRONT(1554)
+#define STIH416_SAS_THSENS_STATUS2		STIH416_SYSCFG_FRONT(1594)
+
+/* STiD127 */
+#define STID127_SYSCFG_CPU(num)			((num - 700) * 4)
+#define STID127_THSENS_CONF			STID127_SYSCFG_CPU(743)
+#define STID127_THSENS_STATUS			STID127_SYSCFG_CPU(767)
+
+static const struct reg_field st_415sas_regfields[MAX_REGFIELDS] = {
+	[TEMP_PWR] = REG_FIELD(STIH415_SAS_THSENS_CONF,   9,  9),
+	[DCORRECT] = REG_FIELD(STIH415_SAS_THSENS_CONF,   4,  8),
+	[OVERFLOW] = REG_FIELD(STIH415_SAS_THSENS_STATUS, 8,  8),
+	[DATA] 	   = REG_FIELD(STIH415_SAS_THSENS_STATUS, 10, 16),
+};
+
+static const struct reg_field st_415mpe_regfields[MAX_REGFIELDS] = {
+	[TEMP_PWR] = REG_FIELD(STIH415_MPE_THSENS_CONF,   8,  8),
+	[DCORRECT] = REG_FIELD(STIH415_MPE_THSENS_CONF,   3,  7),
+	[OVERFLOW] = REG_FIELD(STIH415_MPE_THSENS_STATUS, 9,  9),
+	[DATA]     = REG_FIELD(STIH415_MPE_THSENS_STATUS, 11, 18),
+};
+
+static const struct reg_field st_416sas_regfields[MAX_REGFIELDS] = {
+	[TEMP_PWR] = REG_FIELD(STIH416_SAS_THSENS_CONF,    9,  9),
+	[DCORRECT] = REG_FIELD(STIH416_SAS_THSENS_CONF,    4,  8),
+	[OVERFLOW] = REG_FIELD(STIH416_SAS_THSENS_STATUS1, 8,  8),
+	[DATA]     = REG_FIELD(STIH416_SAS_THSENS_STATUS2, 10, 16),
+};
+
+static const struct reg_field st_127_regfields[MAX_REGFIELDS] = {
+	[TEMP_PWR] = REG_FIELD(STID127_THSENS_CONF,   7,  7),
+	[DCORRECT] = REG_FIELD(STID127_THSENS_CONF,   2,  6),
+	[OVERFLOW] = REG_FIELD(STID127_THSENS_STATUS, 9,  9),
+	[DATA]     = REG_FIELD(STID127_THSENS_STATUS, 11, 18),
+};
+
+/* Private OPs for System Configuration Register based thermal sensors */
+static int st_syscfg_power_ctrl(struct st_thermal_sensor *sensor,
+				enum st_thermal_power_state power_state)
+{
+	return regmap_field_write(sensor->pwr, power_state);
+}
+
+static int st_syscfg_alloc_regfields(struct st_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+
+	sensor->pwr = devm_regmap_field_alloc(dev, sensor->regmap,
+					sensor->cdata->reg_fields[TEMP_PWR]);
+
+	if (IS_ERR(sensor->pwr)) {
+		dev_err(dev, "failed to alloc syscfg regfields\n");
+		return PTR_ERR(sensor->pwr);
+	}
+
+	return 0;
+}
+
+static int st_syscfg_regmap_init(struct st_thermal_sensor *sensor)
+{
+	sensor->regmap =
+		syscon_regmap_lookup_by_compatible(sensor->cdata->sys_compat);
+	if (IS_ERR(sensor->regmap)) {
+		dev_err(sensor->dev, "failed to find syscfg regmap\n");
+		return PTR_ERR(sensor->regmap);
+	}
+
+	return 0;
+}
+
+static const struct st_thermal_sensor_ops st_syscfg_sensor_ops = {
+	.power_ctrl		= st_syscfg_power_ctrl,
+	.alloc_regfields	= st_syscfg_alloc_regfields,
+	.regmap_init		= st_syscfg_regmap_init,
+};
+
+/* Compatible device data for stih415 sas thermal sensor */
+static const struct st_thermal_compat_data st_415sas_cdata = {
+	.sys_compat		= "st,stih415-front-syscfg",
+	.reg_fields		= st_415sas_regfields,
+	.ops			= &st_syscfg_sensor_ops,
+	.calibration_val	= 16,
+	.temp_adjust_val	= 20,
+	.crit_temp		= 120,
+};
+
+/* Compatible device data for stih415 mpe thermal sensor */
+static const struct st_thermal_compat_data st_415mpe_cdata = {
+	.sys_compat		= "st,stih415-system-syscfg",
+	.reg_fields		= st_415mpe_regfields,
+	.ops			= &st_syscfg_sensor_ops,
+	.calibration_val	= 16,
+	.temp_adjust_val	= -103,
+	.crit_temp		= 120,
+};
+
+/* Compatible device data for stih416 sas thermal sensor */
+static const struct st_thermal_compat_data st_416sas_cdata = {
+	.sys_compat		= "st,stih416-front-syscfg",
+	.reg_fields		= st_416sas_regfields,
+	.ops			= &st_syscfg_sensor_ops,
+	.calibration_val	= 16,
+	.temp_adjust_val	= 20,
+	.crit_temp		= 120,
+};
+
+/* Compatible device data for stid127 thermal sensor */
+static const struct st_thermal_compat_data st_127_cdata = {
+	.sys_compat		= "st,stid127-cpu-syscfg",
+	.reg_fields		= st_127_regfields,
+	.ops			= &st_syscfg_sensor_ops,
+	.calibration_val	= 8,
+	.temp_adjust_val	= -103,
+	.crit_temp		= 120,
+};
+
+static const struct of_device_id st_syscfg_thermal_of_match[] = {
+	{ .compatible = "st,stih415-sas-thermal", .data = &st_415sas_cdata },
+	{ .compatible = "st,stih415-mpe-thermal", .data = &st_415mpe_cdata },
+	{ .compatible = "st,stih416-sas-thermal", .data = &st_416sas_cdata },
+	{ .compatible = "st,stid127-thermal",     .data = &st_127_cdata },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_syscfg_thermal_of_match);
+
+static int st_syscfg_probe(struct platform_device *pdev)
+{
+	return st_thermal_register(pdev, st_syscfg_thermal_of_match);
+}
+
+static int st_syscfg_remove(struct platform_device *pdev)
+{
+	return st_thermal_unregister(pdev);
+}
+
+static struct platform_driver st_syscfg_thermal_driver = {
+	.driver = {
+		.name	= "st_syscfg_thermal",
+		.pm     = &st_thermal_pm_ops,
+		.of_match_table =  st_syscfg_thermal_of_match,
+	},
+	.probe		= st_syscfg_probe,
+	.remove		= st_syscfg_remove,
+};
+module_platform_driver(st_syscfg_thermal_driver);
+
+MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
new file mode 100644
index 000000000..5fd3fb891
--- /dev/null
+++ b/drivers/thermal/st/stm_thermal.c
@@ -0,0 +1,604 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: David Hernandez Sanchez <david.hernandezsanchez@st.com> for
+ * STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "../thermal_core.h"
+#include "../thermal_hwmon.h"
+
+/* DTS register offsets */
+#define DTS_CFGR1_OFFSET	0x0
+#define DTS_T0VALR1_OFFSET	0x8
+#define DTS_RAMPVALR_OFFSET	0X10
+#define DTS_ITR1_OFFSET		0x14
+#define DTS_DR_OFFSET		0x1C
+#define DTS_SR_OFFSET		0x20
+#define DTS_ITENR_OFFSET	0x24
+#define DTS_ICIFR_OFFSET	0x28
+
+/* DTS_CFGR1 register mask definitions */
+#define HSREF_CLK_DIV_MASK	GENMASK(30, 24)
+#define TS1_SMP_TIME_MASK	GENMASK(19, 16)
+#define TS1_INTRIG_SEL_MASK	GENMASK(11, 8)
+
+/* DTS_T0VALR1 register mask definitions */
+#define TS1_T0_MASK		GENMASK(17, 16)
+#define TS1_FMT0_MASK		GENMASK(15, 0)
+
+/* DTS_RAMPVALR register mask definitions */
+#define TS1_RAMP_COEFF_MASK	GENMASK(15, 0)
+
+/* DTS_ITR1 register mask definitions */
+#define TS1_HITTHD_MASK		GENMASK(31, 16)
+#define TS1_LITTHD_MASK		GENMASK(15, 0)
+
+/* DTS_DR register mask definitions */
+#define TS1_MFREQ_MASK		GENMASK(15, 0)
+
+/* DTS_ITENR register mask definitions */
+#define ITENR_MASK		(GENMASK(2, 0) | GENMASK(6, 4))
+
+/* DTS_ICIFR register mask definitions */
+#define ICIFR_MASK		(GENMASK(2, 0) | GENMASK(6, 4))
+
+/* Less significant bit position definitions */
+#define TS1_T0_POS		16
+#define TS1_HITTHD_POS		16
+#define TS1_LITTHD_POS		0
+#define HSREF_CLK_DIV_POS	24
+
+/* DTS_CFGR1 bit definitions */
+#define TS1_EN			BIT(0)
+#define TS1_START		BIT(4)
+#define REFCLK_SEL		BIT(20)
+#define REFCLK_LSE		REFCLK_SEL
+#define Q_MEAS_OPT		BIT(21)
+#define CALIBRATION_CONTROL	Q_MEAS_OPT
+
+/* DTS_SR bit definitions */
+#define TS_RDY			BIT(15)
+/* Bit definitions below are common for DTS_SR, DTS_ITENR and DTS_CIFR */
+#define HIGH_THRESHOLD		BIT(2)
+#define LOW_THRESHOLD		BIT(1)
+
+/* Constants */
+#define ADJUST			100
+#define ONE_MHZ			1000000
+#define POLL_TIMEOUT		5000
+#define STARTUP_TIME		40
+#define TS1_T0_VAL0		30000  /* 30 celsius */
+#define TS1_T0_VAL1		130000 /* 130 celsius */
+#define NO_HW_TRIG		0
+#define SAMPLING_TIME		15
+
+struct stm_thermal_sensor {
+	struct device *dev;
+	struct thermal_zone_device *th_dev;
+	enum thermal_device_mode mode;
+	struct clk *clk;
+	unsigned int low_temp_enabled;
+	unsigned int high_temp_enabled;
+	int irq;
+	void __iomem *base;
+	int t0, fmt0, ramp_coeff;
+};
+
+static int stm_enable_irq(struct stm_thermal_sensor *sensor)
+{
+	u32 value;
+
+	dev_dbg(sensor->dev, "low:%d high:%d\n", sensor->low_temp_enabled,
+		sensor->high_temp_enabled);
+
+	/* Disable IT generation for low and high thresholds */
+	value = readl_relaxed(sensor->base + DTS_ITENR_OFFSET);
+	value &= ~(LOW_THRESHOLD | HIGH_THRESHOLD);
+
+	if (sensor->low_temp_enabled)
+		value |= HIGH_THRESHOLD;
+
+	if (sensor->high_temp_enabled)
+		value |= LOW_THRESHOLD;
+
+	/* Enable interrupts */
+	writel_relaxed(value, sensor->base + DTS_ITENR_OFFSET);
+
+	return 0;
+}
+
+static irqreturn_t stm_thermal_irq_handler(int irq, void *sdata)
+{
+	struct stm_thermal_sensor *sensor = sdata;
+
+	dev_dbg(sensor->dev, "sr:%d\n",
+		readl_relaxed(sensor->base + DTS_SR_OFFSET));
+
+	thermal_zone_device_update(sensor->th_dev, THERMAL_EVENT_UNSPECIFIED);
+
+	stm_enable_irq(sensor);
+
+	/* Acknoledge all DTS irqs */
+	writel_relaxed(ICIFR_MASK, sensor->base + DTS_ICIFR_OFFSET);
+
+	return IRQ_HANDLED;
+}
+
+static int stm_sensor_power_on(struct stm_thermal_sensor *sensor)
+{
+	int ret;
+	u32 value;
+
+	/* Enable sensor */
+	value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+	value |= TS1_EN;
+	writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+	/*
+	 * The DTS block can be enabled by setting TSx_EN bit in
+	 * DTS_CFGRx register. It requires a startup time of
+	 * 40μs. Use 5 ms as arbitrary timeout.
+	 */
+	ret = readl_poll_timeout(sensor->base + DTS_SR_OFFSET,
+				 value, (value & TS_RDY),
+				 STARTUP_TIME, POLL_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* Start continuous measuring */
+	value = readl_relaxed(sensor->base +
+			      DTS_CFGR1_OFFSET);
+	value |= TS1_START;
+	writel_relaxed(value, sensor->base +
+		       DTS_CFGR1_OFFSET);
+
+	sensor->mode = THERMAL_DEVICE_ENABLED;
+
+	return 0;
+}
+
+static int stm_sensor_power_off(struct stm_thermal_sensor *sensor)
+{
+	u32 value;
+
+	sensor->mode = THERMAL_DEVICE_DISABLED;
+
+	/* Stop measuring */
+	value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+	value &= ~TS1_START;
+	writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+	/* Ensure stop is taken into account */
+	usleep_range(STARTUP_TIME, POLL_TIMEOUT);
+
+	/* Disable sensor */
+	value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+	value &= ~TS1_EN;
+	writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+	/* Ensure disable is taken into account */
+	return readl_poll_timeout(sensor->base + DTS_SR_OFFSET, value,
+				  !(value & TS_RDY),
+				  STARTUP_TIME, POLL_TIMEOUT);
+}
+
+static int stm_thermal_calibration(struct stm_thermal_sensor *sensor)
+{
+	u32 value, clk_freq;
+	u32 prescaler;
+
+	/* Figure out prescaler value for PCLK during calibration */
+	clk_freq = clk_get_rate(sensor->clk);
+	if (!clk_freq)
+		return -EINVAL;
+
+	prescaler = 0;
+	clk_freq /= ONE_MHZ;
+	if (clk_freq) {
+		while (prescaler <= clk_freq)
+			prescaler++;
+	}
+
+	value = readl_relaxed(sensor->base + DTS_CFGR1_OFFSET);
+
+	/* Clear prescaler */
+	value &= ~HSREF_CLK_DIV_MASK;
+
+	/* Set prescaler. pclk_freq/prescaler < 1MHz */
+	value |= (prescaler << HSREF_CLK_DIV_POS);
+
+	/* Select PCLK as reference clock */
+	value &= ~REFCLK_SEL;
+
+	/* Set maximal sampling time for better precision */
+	value |= TS1_SMP_TIME_MASK;
+
+	/* Measure with calibration */
+	value &= ~CALIBRATION_CONTROL;
+
+	/* select trigger */
+	value &= ~TS1_INTRIG_SEL_MASK;
+	value |= NO_HW_TRIG;
+
+	writel_relaxed(value, sensor->base + DTS_CFGR1_OFFSET);
+
+	return 0;
+}
+
+/* Fill in DTS structure with factory sensor values */
+static int stm_thermal_read_factory_settings(struct stm_thermal_sensor *sensor)
+{
+	/* Retrieve engineering calibration temperature */
+	sensor->t0 = readl_relaxed(sensor->base + DTS_T0VALR1_OFFSET) &
+					TS1_T0_MASK;
+	if (!sensor->t0)
+		sensor->t0 = TS1_T0_VAL0;
+	else
+		sensor->t0 = TS1_T0_VAL1;
+
+	/* Retrieve fmt0 and put it on Hz */
+	sensor->fmt0 = ADJUST * (readl_relaxed(sensor->base +
+				 DTS_T0VALR1_OFFSET) & TS1_FMT0_MASK);
+
+	/* Retrieve ramp coefficient */
+	sensor->ramp_coeff = readl_relaxed(sensor->base + DTS_RAMPVALR_OFFSET) &
+					   TS1_RAMP_COEFF_MASK;
+
+	if (!sensor->fmt0 || !sensor->ramp_coeff) {
+		dev_err(sensor->dev, "%s: wrong setting\n", __func__);
+		return -EINVAL;
+	}
+
+	dev_dbg(sensor->dev, "%s: T0 = %doC, FMT0 = %dHz, RAMP_COEFF = %dHz/oC",
+		__func__, sensor->t0, sensor->fmt0, sensor->ramp_coeff);
+
+	return 0;
+}
+
+static int stm_thermal_calculate_threshold(struct stm_thermal_sensor *sensor,
+					   int temp, u32 *th)
+{
+	int freqM;
+
+	/* Figure out the CLK_PTAT frequency for a given temperature */
+	freqM = ((temp - sensor->t0) * sensor->ramp_coeff) / 1000 +
+		sensor->fmt0;
+
+	/* Figure out the threshold sample number */
+	*th = clk_get_rate(sensor->clk) * SAMPLING_TIME / freqM;
+	if (!*th)
+		return -EINVAL;
+
+	dev_dbg(sensor->dev, "freqM=%d Hz, threshold=0x%x", freqM, *th);
+
+	return 0;
+}
+
+/* Disable temperature interrupt */
+static int stm_disable_irq(struct stm_thermal_sensor *sensor)
+{
+	u32 value;
+
+	/* Disable IT generation */
+	value = readl_relaxed(sensor->base + DTS_ITENR_OFFSET);
+	value &= ~ITENR_MASK;
+	writel_relaxed(value, sensor->base + DTS_ITENR_OFFSET);
+
+	return 0;
+}
+
+static int stm_thermal_set_trips(void *data, int low, int high)
+{
+	struct stm_thermal_sensor *sensor = data;
+	u32 itr1, th;
+	int ret;
+
+	dev_dbg(sensor->dev, "set trips %d <--> %d\n", low, high);
+
+	/* Erase threshold content */
+	itr1 = readl_relaxed(sensor->base + DTS_ITR1_OFFSET);
+	itr1 &= ~(TS1_LITTHD_MASK | TS1_HITTHD_MASK);
+
+	/*
+	 * Disable low-temp if "low" is too small. As per thermal framework
+	 * API, we use -INT_MAX rather than INT_MIN.
+	 */
+
+	if (low > -INT_MAX) {
+		sensor->low_temp_enabled = 1;
+		/* add 0.5 of hysteresis due to measurement error */
+		ret = stm_thermal_calculate_threshold(sensor, low - 500, &th);
+		if (ret)
+			return ret;
+
+		itr1 |= (TS1_HITTHD_MASK  & (th << TS1_HITTHD_POS));
+	} else {
+		sensor->low_temp_enabled = 0;
+	}
+
+	/* Disable high-temp if "high" is too big. */
+	if (high < INT_MAX) {
+		sensor->high_temp_enabled = 1;
+		ret = stm_thermal_calculate_threshold(sensor, high, &th);
+		if (ret)
+			return ret;
+
+		itr1 |= (TS1_LITTHD_MASK  & (th << TS1_LITTHD_POS));
+	} else {
+		sensor->high_temp_enabled = 0;
+	}
+
+	/* Write new threshod values*/
+	writel_relaxed(itr1, sensor->base + DTS_ITR1_OFFSET);
+
+	return 0;
+}
+
+/* Callback to get temperature from HW */
+static int stm_thermal_get_temp(void *data, int *temp)
+{
+	struct stm_thermal_sensor *sensor = data;
+	u32 periods;
+	int freqM, ret;
+
+	if (sensor->mode != THERMAL_DEVICE_ENABLED)
+		return -EAGAIN;
+
+	/* Retrieve the number of periods sampled */
+	ret = readl_relaxed_poll_timeout(sensor->base + DTS_DR_OFFSET, periods,
+					 (periods & TS1_MFREQ_MASK),
+					 STARTUP_TIME, POLL_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* Figure out the CLK_PTAT frequency */
+	freqM = (clk_get_rate(sensor->clk) * SAMPLING_TIME) / periods;
+	if (!freqM)
+		return -EINVAL;
+
+	/* Figure out the temperature in mili celsius */
+	*temp = (freqM - sensor->fmt0) * 1000 / sensor->ramp_coeff + sensor->t0;
+
+	return 0;
+}
+
+/* Registers DTS irq to be visible by GIC */
+static int stm_register_irq(struct stm_thermal_sensor *sensor)
+{
+	struct device *dev = sensor->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	int ret;
+
+	sensor->irq = platform_get_irq(pdev, 0);
+	if (sensor->irq < 0)
+		return sensor->irq;
+
+	ret = devm_request_threaded_irq(dev, sensor->irq,
+					NULL,
+					stm_thermal_irq_handler,
+					IRQF_ONESHOT,
+					dev->driver->name, sensor);
+	if (ret) {
+		dev_err(dev, "%s: Failed to register IRQ %d\n", __func__,
+			sensor->irq);
+		return ret;
+	}
+
+	dev_dbg(dev, "%s: thermal IRQ registered", __func__);
+
+	return 0;
+}
+
+static int stm_thermal_sensor_off(struct stm_thermal_sensor *sensor)
+{
+	int ret;
+
+	stm_disable_irq(sensor);
+
+	ret = stm_sensor_power_off(sensor);
+	if (ret)
+		return ret;
+
+	clk_disable_unprepare(sensor->clk);
+
+	return 0;
+}
+
+static int stm_thermal_prepare(struct stm_thermal_sensor *sensor)
+{
+	int ret;
+
+	ret = clk_prepare_enable(sensor->clk);
+	if (ret)
+		return ret;
+
+	ret = stm_thermal_read_factory_settings(sensor);
+	if (ret)
+		goto thermal_unprepare;
+
+	ret = stm_thermal_calibration(sensor);
+	if (ret)
+		goto thermal_unprepare;
+
+	return 0;
+
+thermal_unprepare:
+	clk_disable_unprepare(sensor->clk);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stm_thermal_suspend(struct device *dev)
+{
+	struct stm_thermal_sensor *sensor = dev_get_drvdata(dev);
+
+	return stm_thermal_sensor_off(sensor);
+}
+
+static int stm_thermal_resume(struct device *dev)
+{
+	int ret;
+	struct stm_thermal_sensor *sensor = dev_get_drvdata(dev);
+
+	ret = stm_thermal_prepare(sensor);
+	if (ret)
+		return ret;
+
+	ret = stm_sensor_power_on(sensor);
+	if (ret)
+		return ret;
+
+	thermal_zone_device_update(sensor->th_dev, THERMAL_EVENT_UNSPECIFIED);
+	stm_enable_irq(sensor);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(stm_thermal_pm_ops,
+			 stm_thermal_suspend, stm_thermal_resume);
+
+static const struct thermal_zone_of_device_ops stm_tz_ops = {
+	.get_temp	= stm_thermal_get_temp,
+	.set_trips	= stm_thermal_set_trips,
+};
+
+static const struct of_device_id stm_thermal_of_match[] = {
+		{ .compatible = "st,stm32-thermal"},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, stm_thermal_of_match);
+
+static int stm_thermal_probe(struct platform_device *pdev)
+{
+	struct stm_thermal_sensor *sensor;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+
+	if (!pdev->dev.of_node) {
+		dev_err(&pdev->dev, "%s: device tree node not found\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	sensor = devm_kzalloc(&pdev->dev, sizeof(*sensor), GFP_KERNEL);
+	if (!sensor)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, sensor);
+
+	sensor->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* Populate sensor */
+	sensor->base = base;
+
+	sensor->clk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(sensor->clk)) {
+		dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n",
+			__func__);
+		return PTR_ERR(sensor->clk);
+	}
+
+	stm_disable_irq(sensor);
+
+	/* Clear irq flags */
+	writel_relaxed(ICIFR_MASK, sensor->base + DTS_ICIFR_OFFSET);
+
+	/* Configure and enable HW sensor */
+	ret = stm_thermal_prepare(sensor);
+	if (ret) {
+		dev_err(&pdev->dev, "Error prepare sensor: %d\n", ret);
+		return ret;
+	}
+
+	ret = stm_sensor_power_on(sensor);
+	if (ret) {
+		dev_err(&pdev->dev, "Error power on sensor: %d\n", ret);
+		return ret;
+	}
+
+	sensor->th_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0,
+							      sensor,
+							      &stm_tz_ops);
+
+	if (IS_ERR(sensor->th_dev)) {
+		dev_err(&pdev->dev, "%s: thermal zone sensor registering KO\n",
+			__func__);
+		ret = PTR_ERR(sensor->th_dev);
+		return ret;
+	}
+
+	/* Register IRQ into GIC */
+	ret = stm_register_irq(sensor);
+	if (ret)
+		goto err_tz;
+
+	stm_enable_irq(sensor);
+
+	/*
+	 * Thermal_zone doesn't enable hwmon as default,
+	 * enable it here
+	 */
+	sensor->th_dev->tzp->no_hwmon = false;
+	ret = thermal_add_hwmon_sysfs(sensor->th_dev);
+	if (ret)
+		goto err_tz;
+
+	dev_info(&pdev->dev, "%s: Driver initialized successfully\n",
+		 __func__);
+
+	return 0;
+
+err_tz:
+	thermal_zone_of_sensor_unregister(&pdev->dev, sensor->th_dev);
+	return ret;
+}
+
+static int stm_thermal_remove(struct platform_device *pdev)
+{
+	struct stm_thermal_sensor *sensor = platform_get_drvdata(pdev);
+
+	stm_thermal_sensor_off(sensor);
+	thermal_remove_hwmon_sysfs(sensor->th_dev);
+	thermal_zone_of_sensor_unregister(&pdev->dev, sensor->th_dev);
+
+	return 0;
+}
+
+static struct platform_driver stm_thermal_driver = {
+	.driver = {
+		.name	= "stm_thermal",
+		.pm     = &stm_thermal_pm_ops,
+		.of_match_table = stm_thermal_of_match,
+	},
+	.probe		= stm_thermal_probe,
+	.remove		= stm_thermal_remove,
+};
+module_platform_driver(stm_thermal_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics STM32 Thermal Sensor Driver");
+MODULE_AUTHOR("David Hernandez Sanchez <david.hernandezsanchez@st.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:stm_thermal");