Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 380 insertions, 0 deletions

diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
new file mode 100644
index 000000000..ed0ea4b17
--- /dev/null
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -0,0 +1,380 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * OMAP4 Bandgap temperature sensor driver
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ *   Eduardo Valentin <eduardo.valentin@ti.com>
+ */
+#ifndef __TI_BANDGAP_H
+#define __TI_BANDGAP_H
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/cpu_pm.h>
+#include <linux/device.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm.h>
+
+struct gpio_desc;
+
+/**
+ * DOC: bandgap driver data structure
+ * ==================================
+ *
+ *   +----------+----------------+
+ *   | struct temp_sensor_regval |
+ *   +---------------------------+
+ *              * (Array of)
+ *              |
+ *              |
+ *   +-------------------+   +-----------------+
+ *   | struct ti_bandgap |-->| struct device * |
+ *   +----------+--------+   +-----------------+
+ *              |
+ *              |
+ *              V
+ *   +------------------------+
+ *   | struct ti_bandgap_data |
+ *   +------------------------+
+ *              |
+ *              |
+ *              * (Array of)
+ * +------------+------------------------------------------------------+
+ * | +----------+------------+   +-------------------------+           |
+ * | | struct ti_temp_sensor |-->| struct temp_sensor_data |           |
+ * | +-----------------------+   +------------+------------+           |
+ * |            |                                                      |
+ * |            +                                                      |
+ * |            V                                                      |
+ * | +----------+-------------------+                                  |
+ * | | struct temp_sensor_registers |                                  |
+ * | +------------------------------+                                  |
+ * |                                                                   |
+ * +-------------------------------------------------------------------+
+ *
+ * Above is a simple diagram describing how the data structure below
+ * are organized. For each bandgap device there should be a ti_bandgap_data
+ * containing the device instance configuration, as well as, an array of
+ * sensors, representing every sensor instance present in this bandgap.
+ */
+
+/**
+ * struct temp_sensor_registers - descriptor to access registers and bitfields
+ * @temp_sensor_ctrl: TEMP_SENSOR_CTRL register offset
+ * @bgap_tempsoff_mask: mask to temp_sensor_ctrl.tempsoff
+ * @bgap_soc_mask: mask to temp_sensor_ctrl.soc
+ * @bgap_eocz_mask: mask to temp_sensor_ctrl.eocz
+ * @bgap_dtemp_mask: mask to temp_sensor_ctrl.dtemp
+ * @bgap_mask_ctrl: BANDGAP_MASK_CTRL register offset
+ * @mask_hot_mask: mask to bandgap_mask_ctrl.mask_hot
+ * @mask_cold_mask: mask to bandgap_mask_ctrl.mask_cold
+ * @mask_counter_delay_mask: mask to bandgap_mask_ctrl.mask_counter_delay
+ * @mask_freeze_mask: mask to bandgap_mask_ctrl.mask_free
+ * @bgap_mode_ctrl: BANDGAP_MODE_CTRL register offset
+ * @mode_ctrl_mask: mask to bandgap_mode_ctrl.mode_ctrl
+ * @bgap_counter: BANDGAP_COUNTER register offset
+ * @counter_mask: mask to bandgap_counter.counter
+ * @bgap_threshold: BANDGAP_THRESHOLD register offset (TALERT thresholds)
+ * @threshold_thot_mask: mask to bandgap_threhold.thot
+ * @threshold_tcold_mask: mask to bandgap_threhold.tcold
+ * @tshut_threshold: TSHUT_THRESHOLD register offset (TSHUT thresholds)
+ * @tshut_hot_mask: mask to tshut_threhold.thot
+ * @tshut_cold_mask: mask to tshut_threhold.thot
+ * @bgap_status: BANDGAP_STATUS register offset
+ * @status_hot_mask: mask to bandgap_status.hot
+ * @status_cold_mask: mask to bandgap_status.cold
+ * @ctrl_dtemp_1: CTRL_DTEMP1 register offset
+ * @ctrl_dtemp_2: CTRL_DTEMP2 register offset
+ * @bgap_efuse: BANDGAP_EFUSE register offset
+ *
+ * The register offsets and bitfields might change across
+ * OMAP and variants versions. Hence this struct serves as a
+ * descriptor map on how to access the registers and the bitfields.
+ *
+ * This descriptor contains registers of all versions of bandgap chips.
+ * Not all versions will use all registers, depending on the available
+ * features. Please read TRMs for descriptive explanation on each bitfield.
+ */
+
+struct temp_sensor_registers {
+	u32	temp_sensor_ctrl;
+	u32	bgap_tempsoff_mask;
+	u32	bgap_soc_mask;
+	u32	bgap_eocz_mask;
+	u32	bgap_dtemp_mask;
+
+	u32	bgap_mask_ctrl;
+	u32	mask_hot_mask;
+	u32	mask_cold_mask;
+	u32	mask_counter_delay_mask;
+	u32	mask_freeze_mask;
+
+	u32	bgap_mode_ctrl;
+	u32	mode_ctrl_mask;
+
+	u32	bgap_counter;
+	u32	counter_mask;
+
+	u32	bgap_threshold;
+	u32	threshold_thot_mask;
+	u32	threshold_tcold_mask;
+
+	u32	tshut_threshold;
+	u32	tshut_hot_mask;
+	u32	tshut_cold_mask;
+
+	u32	bgap_status;
+	u32	status_hot_mask;
+	u32	status_cold_mask;
+
+	u32	ctrl_dtemp_1;
+	u32	ctrl_dtemp_2;
+	u32	bgap_efuse;
+};
+
+/**
+ * struct temp_sensor_data - The thresholds and limits for temperature sensors.
+ * @tshut_hot: temperature to trigger a thermal reset (initial value)
+ * @tshut_cold: temp to get the plat out of reset due to thermal (init val)
+ * @t_hot: temperature to trigger a thermal alert (high initial value)
+ * @t_cold: temperature to trigger a thermal alert (low initial value)
+ * @min_freq: sensor minimum clock rate
+ * @max_freq: sensor maximum clock rate
+ *
+ * This data structure will hold the required thresholds and temperature limits
+ * for a specific temperature sensor, like shutdown temperature, alert
+ * temperature, clock / rate used, ADC conversion limits and update intervals
+ */
+struct temp_sensor_data {
+	u32	tshut_hot;
+	u32	tshut_cold;
+	u32	t_hot;
+	u32	t_cold;
+	u32	min_freq;
+	u32	max_freq;
+};
+
+struct ti_bandgap_data;
+
+/**
+ * struct temp_sensor_regval - temperature sensor register values and priv data
+ * @bg_mode_ctrl: temp sensor control register value
+ * @bg_ctrl: bandgap ctrl register value
+ * @bg_counter: bandgap counter value
+ * @bg_threshold: bandgap threshold register value
+ * @tshut_threshold: bandgap tshut register value
+ * @data: private data
+ *
+ * Data structure to save and restore bandgap register set context. Only
+ * required registers are shadowed, when needed.
+ */
+struct temp_sensor_regval {
+	u32			bg_mode_ctrl;
+	u32			bg_ctrl;
+	u32			bg_counter;
+	u32			bg_threshold;
+	u32			tshut_threshold;
+	void			*data;
+};
+
+/**
+ * struct ti_bandgap - bandgap device structure
+ * @dev: struct device pointer
+ * @base: io memory base address
+ * @conf: struct with bandgap configuration set (# sensors, conv_table, etc)
+ * @regval: temperature sensor register values
+ * @fclock: pointer to functional clock of temperature sensor
+ * @div_clk: pointer to divider clock of temperature sensor fclk
+ * @lock: spinlock for ti_bandgap structure
+ * @irq: MPU IRQ number for thermal alert
+ * @tshut_gpio: GPIO where Tshut signal is routed
+ * @clk_rate: Holds current clock rate
+ *
+ * The bandgap device structure representing the bandgap device instance.
+ * It holds most of the dynamic stuff. Configurations and sensor specific
+ * entries are inside the @conf structure.
+ */
+struct ti_bandgap {
+	struct device			*dev;
+	void __iomem			*base;
+	const struct ti_bandgap_data	*conf;
+	struct temp_sensor_regval	*regval;
+	struct clk			*fclock;
+	struct clk			*div_clk;
+	spinlock_t			lock; /* shields this struct */
+	int				irq;
+	struct gpio_desc		*tshut_gpiod;
+	u32				clk_rate;
+	struct notifier_block		nb;
+	unsigned int is_suspended:1;
+};
+
+/**
+ * struct ti_temp_sensor - bandgap temperature sensor configuration data
+ * @ts_data: pointer to struct with thresholds, limits of temperature sensor
+ * @registers: pointer to the list of register offsets and bitfields
+ * @domain: the name of the domain where the sensor is located
+ * @slope_pcb: sensor gradient slope info for hotspot extrapolation equation
+ *             with no external influence
+ * @constant_pcb: sensor gradient const info for hotspot extrapolation equation
+ *             with no external influence
+ * @register_cooling: function to describe how this sensor is going to be cooled
+ * @unregister_cooling: function to release cooling data
+ *
+ * Data structure to describe a temperature sensor handled by a bandgap device.
+ * It should provide configuration details on this sensor, such as how to
+ * access the registers affecting this sensor, shadow register buffer, how to
+ * assess the gradient from hotspot, how to cooldown the domain when sensor
+ * reports too hot temperature.
+ */
+struct ti_temp_sensor {
+	struct temp_sensor_data		*ts_data;
+	struct temp_sensor_registers	*registers;
+	char				*domain;
+	/* for hotspot extrapolation */
+	const int			slope_pcb;
+	const int			constant_pcb;
+	int (*register_cooling)(struct ti_bandgap *bgp, int id);
+	int (*unregister_cooling)(struct ti_bandgap *bgp, int id);
+};
+
+/**
+ * DOC: ti bandgap feature types
+ *
+ * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
+ *      of a bandgap device instance is routed to the processor. This means
+ *      the system must react and perform the shutdown by itself (handle an
+ *      IRQ, for instance).
+ *
+ * TI_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control
+ *      over the thermal shutdown configuration. This means that the thermal
+ *      shutdown thresholds are programmable, for instance.
+ *
+ * TI_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs
+ *      a signal representing violation of programmable alert thresholds.
+ *
+ * TI_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which
+ *      mode, continuous or one shot, the bandgap device instance will operate.
+ *
+ * TI_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows
+ *      programming the update interval of its internal state machine.
+ *
+ * TI_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows
+ *      itself to be switched on/off.
+ *
+ * TI_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap
+ *      device are gateable or not.
+ *
+ * TI_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features
+ *      a history buffer that its update can be freezed/unfreezed.
+ *
+ * TI_BANDGAP_FEATURE_COUNTER_DELAY - used when the bandgap device features
+ *	a delay programming based on distinct values.
+ *
+ * TI_BANDGAP_FEATURE_HISTORY_BUFFER - used when the bandgap device features
+ *	a history buffer of temperatures.
+ *
+ * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device
+ *	has Errata 814
+ * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
+ *	inaccurate.
+ * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
+ *      specific feature (above) or not. Return non-zero, if yes.
+ */
+#define TI_BANDGAP_FEATURE_TSHUT		BIT(0)
+#define TI_BANDGAP_FEATURE_TSHUT_CONFIG		BIT(1)
+#define TI_BANDGAP_FEATURE_TALERT		BIT(2)
+#define TI_BANDGAP_FEATURE_MODE_CONFIG		BIT(3)
+#define TI_BANDGAP_FEATURE_COUNTER		BIT(4)
+#define TI_BANDGAP_FEATURE_POWER_SWITCH		BIT(5)
+#define TI_BANDGAP_FEATURE_CLK_CTRL		BIT(6)
+#define TI_BANDGAP_FEATURE_FREEZE_BIT		BIT(7)
+#define TI_BANDGAP_FEATURE_COUNTER_DELAY	BIT(8)
+#define TI_BANDGAP_FEATURE_HISTORY_BUFFER	BIT(9)
+#define TI_BANDGAP_FEATURE_ERRATA_814		BIT(10)
+#define TI_BANDGAP_FEATURE_UNRELIABLE		BIT(11)
+#define TI_BANDGAP_HAS(b, f)			\
+			((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
+
+/**
+ * struct ti_bandgap_data - ti bandgap data configuration structure
+ * @features: a bitwise flag set to describe the device features
+ * @conv_table: Pointer to ADC to temperature conversion table
+ * @adc_start_val: ADC conversion table starting value
+ * @adc_end_val: ADC conversion table ending value
+ * @fclock_name: clock name of the functional clock
+ * @div_ck_name: clock name of the clock divisor
+ * @sensor_count: count of temperature sensor within this bandgap device
+ * @report_temperature: callback to report thermal alert to thermal API
+ * @expose_sensor: callback to export sensor to thermal API
+ * @remove_sensor: callback to destroy sensor from thermal API
+ * @sensors: array of sensors present in this bandgap instance
+ *
+ * This is a data structure which should hold most of the static configuration
+ * of a bandgap device instance. It should describe which features this instance
+ * is capable of, the clock names to feed this device, the amount of sensors and
+ * their configuration representation, and how to export and unexport them to
+ * a thermal API.
+ */
+struct ti_bandgap_data {
+	unsigned int			features;
+	const int			*conv_table;
+	u32				adc_start_val;
+	u32				adc_end_val;
+	char				*fclock_name;
+	char				*div_ck_name;
+	int				sensor_count;
+	int (*report_temperature)(struct ti_bandgap *bgp, int id);
+	int (*expose_sensor)(struct ti_bandgap *bgp, int id, char *domain);
+	int (*remove_sensor)(struct ti_bandgap *bgp, int id);
+
+	/* this needs to be at the end */
+	struct ti_temp_sensor		sensors[];
+};
+
+int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot);
+int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val);
+int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold);
+int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val);
+int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
+				    int *interval);
+int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, int id,
+				     u32 interval);
+int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
+				  int *temperature);
+int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data);
+void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id);
+int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend);
+
+#ifdef CONFIG_OMAP3_THERMAL
+extern const struct ti_bandgap_data omap34xx_data;
+extern const struct ti_bandgap_data omap36xx_data;
+#else
+#define omap34xx_data					NULL
+#define omap36xx_data					NULL
+#endif
+
+#ifdef CONFIG_OMAP4_THERMAL
+extern const struct ti_bandgap_data omap4430_data;
+extern const struct ti_bandgap_data omap4460_data;
+extern const struct ti_bandgap_data omap4470_data;
+#else
+#define omap4430_data					NULL
+#define omap4460_data					NULL
+#define omap4470_data					NULL
+#endif
+
+#ifdef CONFIG_OMAP5_THERMAL
+extern const struct ti_bandgap_data omap5430_data;
+#else
+#define omap5430_data					NULL
+#endif
+
+#ifdef CONFIG_DRA752_THERMAL
+extern const struct ti_bandgap_data dra752_data;
+#else
+#define dra752_data					NULL
+#endif
+#endif