Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 5517 insertions, 0 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
new file mode 100644
index 000000000..b069fe3f8
--- /dev/null
+++ b/drivers/usb/host/xhci.c
@@ -0,0 +1,5517 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xHCI host controller driver
+ *
+ * Copyright (C) 2008 Intel Corp.
+ *
+ * Author: Sarah Sharp
+ * Some code borrowed from the Linux EHCI driver.
+ */
+
+#include <linux/pci.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/dmi.h>
+#include <linux/dma-mapping.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-mtk.h"
+#include "xhci-debugfs.h"
+#include "xhci-dbgcap.h"
+
+#define DRIVER_AUTHOR "Sarah Sharp"
+#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+
+#define	PORT_WAKE_BITS	(PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
+/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
+static int link_quirk;
+module_param(link_quirk, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
+
+static unsigned long long quirks;
+module_param(quirks, ullong, S_IRUGO);
+MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+
+static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
+{
+	struct xhci_segment *seg = ring->first_seg;
+
+	if (!td || !td->start_seg)
+		return false;
+	do {
+		if (seg == td->start_seg)
+			return true;
+		seg = seg->next;
+	} while (seg && seg != ring->first_seg);
+
+	return false;
+}
+
+/*
+ * xhci_handshake - spin reading hc until handshake completes or fails
+ * @ptr: address of hc register to be read
+ * @mask: bits to look at in result of read
+ * @done: value of those bits when handshake succeeds
+ * @usec: timeout in microseconds
+ *
+ * Returns negative errno, or zero on success
+ *
+ * Success happens when the "mask" bits have the specified value (hardware
+ * handshake done).  There are two failure modes:  "usec" have passed (major
+ * hardware flakeout), or the register reads as all-ones (hardware removed).
+ */
+int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us)
+{
+	u32	result;
+	int	ret;
+
+	ret = readl_poll_timeout_atomic(ptr, result,
+					(result & mask) == done ||
+					result == U32_MAX,
+					1, timeout_us);
+	if (result == U32_MAX)		/* card removed */
+		return -ENODEV;
+
+	return ret;
+}
+
+/*
+ * Disable interrupts and begin the xHCI halting process.
+ */
+void xhci_quiesce(struct xhci_hcd *xhci)
+{
+	u32 halted;
+	u32 cmd;
+	u32 mask;
+
+	mask = ~(XHCI_IRQS);
+	halted = readl(&xhci->op_regs->status) & STS_HALT;
+	if (!halted)
+		mask &= ~CMD_RUN;
+
+	cmd = readl(&xhci->op_regs->command);
+	cmd &= mask;
+	writel(cmd, &xhci->op_regs->command);
+}
+
+/*
+ * Force HC into halt state.
+ *
+ * Disable any IRQs and clear the run/stop bit.
+ * HC will complete any current and actively pipelined transactions, and
+ * should halt within 16 ms of the run/stop bit being cleared.
+ * Read HC Halted bit in the status register to see when the HC is finished.
+ */
+int xhci_halt(struct xhci_hcd *xhci)
+{
+	int ret;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Halt the HC");
+	xhci_quiesce(xhci);
+
+	ret = xhci_handshake(&xhci->op_regs->status,
+			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
+	if (ret) {
+		xhci_warn(xhci, "Host halt failed, %d\n", ret);
+		return ret;
+	}
+	xhci->xhc_state |= XHCI_STATE_HALTED;
+	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+	return ret;
+}
+
+/*
+ * Set the run bit and wait for the host to be running.
+ */
+int xhci_start(struct xhci_hcd *xhci)
+{
+	u32 temp;
+	int ret;
+
+	temp = readl(&xhci->op_regs->command);
+	temp |= (CMD_RUN);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Turn on HC, cmd = 0x%x.",
+			temp);
+	writel(temp, &xhci->op_regs->command);
+
+	/*
+	 * Wait for the HCHalted Status bit to be 0 to indicate the host is
+	 * running.
+	 */
+	ret = xhci_handshake(&xhci->op_regs->status,
+			STS_HALT, 0, XHCI_MAX_HALT_USEC);
+	if (ret == -ETIMEDOUT)
+		xhci_err(xhci, "Host took too long to start, "
+				"waited %u microseconds.\n",
+				XHCI_MAX_HALT_USEC);
+	if (!ret) {
+		/* clear state flags. Including dying, halted or removing */
+		xhci->xhc_state = 0;
+		xhci->run_graceperiod = jiffies + msecs_to_jiffies(500);
+	}
+
+	return ret;
+}
+
+/*
+ * Reset a halted HC.
+ *
+ * This resets pipelines, timers, counters, state machines, etc.
+ * Transactions will be terminated immediately, and operational registers
+ * will be set to their defaults.
+ */
+int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us)
+{
+	u32 command;
+	u32 state;
+	int ret;
+
+	state = readl(&xhci->op_regs->status);
+
+	if (state == ~(u32)0) {
+		xhci_warn(xhci, "Host not accessible, reset failed.\n");
+		return -ENODEV;
+	}
+
+	if ((state & STS_HALT) == 0) {
+		xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+		return 0;
+	}
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Reset the HC");
+	command = readl(&xhci->op_regs->command);
+	command |= CMD_RESET;
+	writel(command, &xhci->op_regs->command);
+
+	/* Existing Intel xHCI controllers require a delay of 1 mS,
+	 * after setting the CMD_RESET bit, and before accessing any
+	 * HC registers. This allows the HC to complete the
+	 * reset operation and be ready for HC register access.
+	 * Without this delay, the subsequent HC register access,
+	 * may result in a system hang very rarely.
+	 */
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		udelay(1000);
+
+	ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us);
+	if (ret)
+		return ret;
+
+	if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
+		usb_asmedia_modifyflowcontrol(to_pci_dev(xhci_to_hcd(xhci)->self.controller));
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			 "Wait for controller to be ready for doorbell rings");
+	/*
+	 * xHCI cannot write to any doorbells or operational registers other
+	 * than status until the "Controller Not Ready" flag is cleared.
+	 */
+	ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, timeout_us);
+
+	xhci->usb2_rhub.bus_state.port_c_suspend = 0;
+	xhci->usb2_rhub.bus_state.suspended_ports = 0;
+	xhci->usb2_rhub.bus_state.resuming_ports = 0;
+	xhci->usb3_rhub.bus_state.port_c_suspend = 0;
+	xhci->usb3_rhub.bus_state.suspended_ports = 0;
+	xhci->usb3_rhub.bus_state.resuming_ports = 0;
+
+	return ret;
+}
+
+static void xhci_zero_64b_regs(struct xhci_hcd *xhci)
+{
+	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
+	struct iommu_domain *domain;
+	int err, i;
+	u64 val;
+	u32 intrs;
+
+	/*
+	 * Some Renesas controllers get into a weird state if they are
+	 * reset while programmed with 64bit addresses (they will preserve
+	 * the top half of the address in internal, non visible
+	 * registers). You end up with half the address coming from the
+	 * kernel, and the other half coming from the firmware. Also,
+	 * changing the programming leads to extra accesses even if the
+	 * controller is supposed to be halted. The controller ends up with
+	 * a fatal fault, and is then ripe for being properly reset.
+	 *
+	 * Special care is taken to only apply this if the device is behind
+	 * an iommu. Doing anything when there is no iommu is definitely
+	 * unsafe...
+	 */
+	domain = iommu_get_domain_for_dev(dev);
+	if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !domain ||
+	    domain->type == IOMMU_DOMAIN_IDENTITY)
+		return;
+
+	xhci_info(xhci, "Zeroing 64bit base registers, expecting fault\n");
+
+	/* Clear HSEIE so that faults do not get signaled */
+	val = readl(&xhci->op_regs->command);
+	val &= ~CMD_HSEIE;
+	writel(val, &xhci->op_regs->command);
+
+	/* Clear HSE (aka FATAL) */
+	val = readl(&xhci->op_regs->status);
+	val |= STS_FATAL;
+	writel(val, &xhci->op_regs->status);
+
+	/* Now zero the registers, and brace for impact */
+	val = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+	if (upper_32_bits(val))
+		xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
+	val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	if (upper_32_bits(val))
+		xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
+
+	intrs = min_t(u32, HCS_MAX_INTRS(xhci->hcs_params1),
+		      ARRAY_SIZE(xhci->run_regs->ir_set));
+
+	for (i = 0; i < intrs; i++) {
+		struct xhci_intr_reg __iomem *ir;
+
+		ir = &xhci->run_regs->ir_set[i];
+		val = xhci_read_64(xhci, &ir->erst_base);
+		if (upper_32_bits(val))
+			xhci_write_64(xhci, 0, &ir->erst_base);
+		val= xhci_read_64(xhci, &ir->erst_dequeue);
+		if (upper_32_bits(val))
+			xhci_write_64(xhci, 0, &ir->erst_dequeue);
+	}
+
+	/* Wait for the fault to appear. It will be cleared on reset */
+	err = xhci_handshake(&xhci->op_regs->status,
+			     STS_FATAL, STS_FATAL,
+			     XHCI_MAX_HALT_USEC);
+	if (!err)
+		xhci_info(xhci, "Fault detected\n");
+}
+
+#ifdef CONFIG_USB_PCI
+/*
+ * Set up MSI
+ */
+static int xhci_setup_msi(struct xhci_hcd *xhci)
+{
+	int ret;
+	/*
+	 * TODO:Check with MSI Soc for sysdev
+	 */
+	struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+	if (ret < 0) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"failed to allocate MSI entry");
+		return ret;
+	}
+
+	ret = request_irq(pdev->irq, xhci_msi_irq,
+				0, "xhci_hcd", xhci_to_hcd(xhci));
+	if (ret) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"disable MSI interrupt");
+		pci_free_irq_vectors(pdev);
+	}
+
+	return ret;
+}
+
+/*
+ * Set up MSI-X
+ */
+static int xhci_setup_msix(struct xhci_hcd *xhci)
+{
+	int i, ret = 0;
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+	/*
+	 * calculate number of msi-x vectors supported.
+	 * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
+	 *   with max number of interrupters based on the xhci HCSPARAMS1.
+	 * - num_online_cpus: maximum msi-x vectors per CPUs core.
+	 *   Add additional 1 vector to ensure always available interrupt.
+	 */
+	xhci->msix_count = min(num_online_cpus() + 1,
+				HCS_MAX_INTRS(xhci->hcs_params1));
+
+	ret = pci_alloc_irq_vectors(pdev, xhci->msix_count, xhci->msix_count,
+			PCI_IRQ_MSIX);
+	if (ret < 0) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"Failed to enable MSI-X");
+		return ret;
+	}
+
+	for (i = 0; i < xhci->msix_count; i++) {
+		ret = request_irq(pci_irq_vector(pdev, i), xhci_msi_irq, 0,
+				"xhci_hcd", xhci_to_hcd(xhci));
+		if (ret)
+			goto disable_msix;
+	}
+
+	hcd->msix_enabled = 1;
+	return ret;
+
+disable_msix:
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt");
+	while (--i >= 0)
+		free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
+	pci_free_irq_vectors(pdev);
+	return ret;
+}
+
+/* Free any IRQs and disable MSI-X */
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+	if (xhci->quirks & XHCI_PLAT)
+		return;
+
+	/* return if using legacy interrupt */
+	if (hcd->irq > 0)
+		return;
+
+	if (hcd->msix_enabled) {
+		int i;
+
+		for (i = 0; i < xhci->msix_count; i++)
+			free_irq(pci_irq_vector(pdev, i), xhci_to_hcd(xhci));
+	} else {
+		free_irq(pci_irq_vector(pdev, 0), xhci_to_hcd(xhci));
+	}
+
+	pci_free_irq_vectors(pdev);
+	hcd->msix_enabled = 0;
+}
+
+static void __maybe_unused xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+
+	if (hcd->msix_enabled) {
+		struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+		int i;
+
+		for (i = 0; i < xhci->msix_count; i++)
+			synchronize_irq(pci_irq_vector(pdev, i));
+	}
+}
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct pci_dev  *pdev;
+	int ret;
+
+	/* The xhci platform device has set up IRQs through usb_add_hcd. */
+	if (xhci->quirks & XHCI_PLAT)
+		return 0;
+
+	pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+	/*
+	 * Some Fresco Logic host controllers advertise MSI, but fail to
+	 * generate interrupts.  Don't even try to enable MSI.
+	 */
+	if (xhci->quirks & XHCI_BROKEN_MSI)
+		goto legacy_irq;
+
+	/* unregister the legacy interrupt */
+	if (hcd->irq)
+		free_irq(hcd->irq, hcd);
+	hcd->irq = 0;
+
+	ret = xhci_setup_msix(xhci);
+	if (ret)
+		/* fall back to msi*/
+		ret = xhci_setup_msi(xhci);
+
+	if (!ret) {
+		hcd->msi_enabled = 1;
+		return 0;
+	}
+
+	if (!pdev->irq) {
+		xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+		return -EINVAL;
+	}
+
+ legacy_irq:
+	if (!strlen(hcd->irq_descr))
+		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
+			 hcd->driver->description, hcd->self.busnum);
+
+	/* fall back to legacy interrupt*/
+	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+			hcd->irq_descr, hcd);
+	if (ret) {
+		xhci_err(xhci, "request interrupt %d failed\n",
+				pdev->irq);
+		return ret;
+	}
+	hcd->irq = pdev->irq;
+	return 0;
+}
+
+#else
+
+static inline int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+	return 0;
+}
+
+static inline void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+}
+
+static inline void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+}
+
+#endif
+
+static void compliance_mode_recovery(struct timer_list *t)
+{
+	struct xhci_hcd *xhci;
+	struct usb_hcd *hcd;
+	struct xhci_hub *rhub;
+	u32 temp;
+	int i;
+
+	xhci = from_timer(xhci, t, comp_mode_recovery_timer);
+	rhub = &xhci->usb3_rhub;
+
+	for (i = 0; i < rhub->num_ports; i++) {
+		temp = readl(rhub->ports[i]->addr);
+		if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+			/*
+			 * Compliance Mode Detected. Letting USB Core
+			 * handle the Warm Reset
+			 */
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+					"Compliance mode detected->port %d",
+					i + 1);
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+					"Attempting compliance mode recovery");
+			hcd = xhci->shared_hcd;
+
+			if (hcd->state == HC_STATE_SUSPENDED)
+				usb_hcd_resume_root_hub(hcd);
+
+			usb_hcd_poll_rh_status(hcd);
+		}
+	}
+
+	if (xhci->port_status_u0 != ((1 << rhub->num_ports) - 1))
+		mod_timer(&xhci->comp_mode_recovery_timer,
+			jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+/*
+ * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver
+ * that causes ports behind that hardware to enter compliance mode sometimes.
+ * The quirk creates a timer that polls every 2 seconds the link state of
+ * each host controller's port and recovers it by issuing a Warm reset
+ * if Compliance mode is detected, otherwise the port will become "dead" (no
+ * device connections or disconnections will be detected anymore). Becasue no
+ * status event is generated when entering compliance mode (per xhci spec),
+ * this quirk is needed on systems that have the failing hardware installed.
+ */
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+	xhci->port_status_u0 = 0;
+	timer_setup(&xhci->comp_mode_recovery_timer, compliance_mode_recovery,
+		    0);
+	xhci->comp_mode_recovery_timer.expires = jiffies +
+			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+
+	add_timer(&xhci->comp_mode_recovery_timer);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"Compliance mode recovery timer initialized");
+}
+
+/*
+ * This function identifies the systems that have installed the SN65LVPE502CP
+ * USB3.0 re-driver and that need the Compliance Mode Quirk.
+ * Systems:
+ * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
+ */
+static bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+{
+	const char *dmi_product_name, *dmi_sys_vendor;
+
+	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	if (!dmi_product_name || !dmi_sys_vendor)
+		return false;
+
+	if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
+		return false;
+
+	if (strstr(dmi_product_name, "Z420") ||
+			strstr(dmi_product_name, "Z620") ||
+			strstr(dmi_product_name, "Z820") ||
+			strstr(dmi_product_name, "Z1 Workstation"))
+		return true;
+
+	return false;
+}
+
+static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
+{
+	return (xhci->port_status_u0 == ((1 << xhci->usb3_rhub.num_ports) - 1));
+}
+
+
+/*
+ * Initialize memory for HCD and xHC (one-time init).
+ *
+ * Program the PAGESIZE register, initialize the device context array, create
+ * device contexts (?), set up a command ring segment (or two?), create event
+ * ring (one for now).
+ */
+static int xhci_init(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	int retval = 0;
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_init");
+	spin_lock_init(&xhci->lock);
+	if (xhci->hci_version == 0x95 && link_quirk) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"QUIRK: Not clearing Link TRB chain bits.");
+		xhci->quirks |= XHCI_LINK_TRB_QUIRK;
+	} else {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+				"xHCI doesn't need link TRB QUIRK");
+	}
+	retval = xhci_mem_init(xhci, GFP_KERNEL);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
+
+	/* Initializing Compliance Mode Recovery Data If Needed */
+	if (xhci_compliance_mode_recovery_timer_quirk_check()) {
+		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+		compliance_mode_recovery_timer_init(xhci);
+	}
+
+	return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+
+static int xhci_run_finished(struct xhci_hcd *xhci)
+{
+	if (xhci_start(xhci)) {
+		xhci_halt(xhci);
+		return -ENODEV;
+	}
+	xhci->shared_hcd->state = HC_STATE_RUNNING;
+	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+	if (xhci->quirks & XHCI_NEC_HOST)
+		xhci_ring_cmd_db(xhci);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Finished xhci_run for USB3 roothub");
+	return 0;
+}
+
+/*
+ * Start the HC after it was halted.
+ *
+ * This function is called by the USB core when the HC driver is added.
+ * Its opposite is xhci_stop().
+ *
+ * xhci_init() must be called once before this function can be called.
+ * Reset the HC, enable device slot contexts, program DCBAAP, and
+ * set command ring pointer and event ring pointer.
+ *
+ * Setup MSI-X vectors and enable interrupts.
+ */
+int xhci_run(struct usb_hcd *hcd)
+{
+	u32 temp;
+	u64 temp_64;
+	int ret;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	/* Start the xHCI host controller running only after the USB 2.0 roothub
+	 * is setup.
+	 */
+
+	hcd->uses_new_polling = 1;
+	if (!usb_hcd_is_primary_hcd(hcd))
+		return xhci_run_finished(xhci);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_run");
+
+	ret = xhci_try_enable_msi(hcd);
+	if (ret)
+		return ret;
+
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	temp_64 &= ~ERST_PTR_MASK;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Set the interrupt modulation register");
+	temp = readl(&xhci->ir_set->irq_control);
+	temp &= ~ER_IRQ_INTERVAL_MASK;
+	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+	writel(temp, &xhci->ir_set->irq_control);
+
+	/* Set the HCD state before we enable the irqs */
+	temp = readl(&xhci->op_regs->command);
+	temp |= (CMD_EIE);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Enable interrupts, cmd = 0x%x.", temp);
+	writel(temp, &xhci->op_regs->command);
+
+	temp = readl(&xhci->ir_set->irq_pending);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Enabling event ring interrupter %p by writing 0x%x to irq_pending",
+			xhci->ir_set, (unsigned int) ER_IRQ_ENABLE(temp));
+	writel(ER_IRQ_ENABLE(temp), &xhci->ir_set->irq_pending);
+
+	if (xhci->quirks & XHCI_NEC_HOST) {
+		struct xhci_command *command;
+
+		command = xhci_alloc_command(xhci, false, GFP_KERNEL);
+		if (!command)
+			return -ENOMEM;
+
+		ret = xhci_queue_vendor_command(xhci, command, 0, 0, 0,
+				TRB_TYPE(TRB_NEC_GET_FW));
+		if (ret)
+			xhci_free_command(xhci, command);
+	}
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"Finished xhci_run for USB2 roothub");
+
+	set_bit(HCD_FLAG_DEFER_RH_REGISTER, &hcd->flags);
+
+	xhci_dbc_init(xhci);
+
+	xhci_debugfs_init(xhci);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_run);
+
+/*
+ * Stop xHCI driver.
+ *
+ * This function is called by the USB core when the HC driver is removed.
+ * Its opposite is xhci_run().
+ *
+ * Disable device contexts, disable IRQs, and quiesce the HC.
+ * Reset the HC, finish any completed transactions, and cleanup memory.
+ */
+static void xhci_stop(struct usb_hcd *hcd)
+{
+	u32 temp;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	mutex_lock(&xhci->mutex);
+
+	/* Only halt host and free memory after both hcds are removed */
+	if (!usb_hcd_is_primary_hcd(hcd)) {
+		mutex_unlock(&xhci->mutex);
+		return;
+	}
+
+	xhci_dbc_exit(xhci);
+
+	spin_lock_irq(&xhci->lock);
+	xhci->xhc_state |= XHCI_STATE_HALTED;
+	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+	xhci_halt(xhci);
+	xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+	spin_unlock_irq(&xhci->lock);
+
+	xhci_cleanup_msix(xhci);
+
+	/* Deleting Compliance Mode Recovery Timer */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci)))) {
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"%s: compliance mode recovery timer deleted",
+				__func__);
+	}
+
+	if (xhci->quirks & XHCI_AMD_PLL_FIX)
+		usb_amd_dev_put();
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Disabling event ring interrupts");
+	temp = readl(&xhci->op_regs->status);
+	writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status);
+	temp = readl(&xhci->ir_set->irq_pending);
+	writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "cleaning up memory");
+	xhci_mem_cleanup(xhci);
+	xhci_debugfs_exit(xhci);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"xhci_stop completed - status = %x",
+			readl(&xhci->op_regs->status));
+	mutex_unlock(&xhci->mutex);
+}
+
+/*
+ * Shutdown HC (not bus-specific)
+ *
+ * This is called when the machine is rebooting or halting.  We assume that the
+ * machine will be powered off, and the HC's internal state will be reset.
+ * Don't bother to free memory.
+ *
+ * This will only ever be called with the main usb_hcd (the USB3 roothub).
+ */
+void xhci_shutdown(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
+		usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
+
+	/* Don't poll the roothubs after shutdown. */
+	xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
+			__func__, hcd->self.busnum);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+
+	if (xhci->shared_hcd) {
+		clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+		del_timer_sync(&xhci->shared_hcd->rh_timer);
+	}
+
+	spin_lock_irq(&xhci->lock);
+	xhci_halt(xhci);
+
+	/*
+	 * Workaround for spurious wakeps at shutdown with HSW, and for boot
+	 * firmware delay in ADL-P PCH if port are left in U3 at shutdown
+	 */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP ||
+	    xhci->quirks & XHCI_RESET_TO_DEFAULT)
+		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+
+	spin_unlock_irq(&xhci->lock);
+
+	xhci_cleanup_msix(xhci);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"xhci_shutdown completed - status = %x",
+			readl(&xhci->op_regs->status));
+}
+EXPORT_SYMBOL_GPL(xhci_shutdown);
+
+#ifdef CONFIG_PM
+static void xhci_save_registers(struct xhci_hcd *xhci)
+{
+	xhci->s3.command = readl(&xhci->op_regs->command);
+	xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification);
+	xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+	xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
+	xhci->s3.erst_size = readl(&xhci->ir_set->erst_size);
+	xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+	xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending);
+	xhci->s3.irq_control = readl(&xhci->ir_set->irq_control);
+}
+
+static void xhci_restore_registers(struct xhci_hcd *xhci)
+{
+	writel(xhci->s3.command, &xhci->op_regs->command);
+	writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
+	xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
+	writel(xhci->s3.config_reg, &xhci->op_regs->config_reg);
+	writel(xhci->s3.erst_size, &xhci->ir_set->erst_size);
+	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+	xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+	writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+	writel(xhci->s3.irq_control, &xhci->ir_set->irq_control);
+}
+
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+	u64	val_64;
+
+	/* step 2: initialize command ring buffer */
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+				      xhci->cmd_ring->dequeue) &
+		 (u64) ~CMD_RING_RSVD_BITS) |
+		xhci->cmd_ring->cycle_state;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+			"// Setting command ring address to 0x%llx",
+			(long unsigned long) val_64);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume.  Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register.  Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+	struct xhci_ring *ring;
+	struct xhci_segment *seg;
+
+	ring = xhci->cmd_ring;
+	seg = ring->deq_seg;
+	do {
+		memset(seg->trbs, 0,
+			sizeof(union xhci_trb) * (TRBS_PER_SEGMENT - 1));
+		seg->trbs[TRBS_PER_SEGMENT - 1].link.control &=
+			cpu_to_le32(~TRB_CYCLE);
+		seg = seg->next;
+	} while (seg != ring->deq_seg);
+
+	/* Reset the software enqueue and dequeue pointers */
+	ring->deq_seg = ring->first_seg;
+	ring->dequeue = ring->first_seg->trbs;
+	ring->enq_seg = ring->deq_seg;
+	ring->enqueue = ring->dequeue;
+
+	ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1;
+	/*
+	 * Ring is now zeroed, so the HW should look for change of ownership
+	 * when the cycle bit is set to 1.
+	 */
+	ring->cycle_state = 1;
+
+	/*
+	 * Reset the hardware dequeue pointer.
+	 * Yes, this will need to be re-written after resume, but we're paranoid
+	 * and want to make sure the hardware doesn't access bogus memory
+	 * because, say, the BIOS or an SMI started the host without changing
+	 * the command ring pointers.
+	 */
+	xhci_set_cmd_ring_deq(xhci);
+}
+
+/*
+ * Disable port wake bits if do_wakeup is not set.
+ *
+ * Also clear a possible internal port wake state left hanging for ports that
+ * detected termination but never successfully enumerated (trained to 0U).
+ * Internal wake causes immediate xHCI wake after suspend. PORT_CSC write done
+ * at enumeration clears this wake, force one here as well for unconnected ports
+ */
+
+static void xhci_disable_hub_port_wake(struct xhci_hcd *xhci,
+				       struct xhci_hub *rhub,
+				       bool do_wakeup)
+{
+	unsigned long flags;
+	u32 t1, t2, portsc;
+	int i;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	for (i = 0; i < rhub->num_ports; i++) {
+		portsc = readl(rhub->ports[i]->addr);
+		t1 = xhci_port_state_to_neutral(portsc);
+		t2 = t1;
+
+		/* clear wake bits if do_wake is not set */
+		if (!do_wakeup)
+			t2 &= ~PORT_WAKE_BITS;
+
+		/* Don't touch csc bit if connected or connect change is set */
+		if (!(portsc & (PORT_CSC | PORT_CONNECT)))
+			t2 |= PORT_CSC;
+
+		if (t1 != t2) {
+			writel(t2, rhub->ports[i]->addr);
+			xhci_dbg(xhci, "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\n",
+				 rhub->hcd->self.busnum, i + 1, portsc, t2);
+		}
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static bool xhci_pending_portevent(struct xhci_hcd *xhci)
+{
+	struct xhci_port	**ports;
+	int			port_index;
+	u32			status;
+	u32			portsc;
+
+	status = readl(&xhci->op_regs->status);
+	if (status & STS_EINT)
+		return true;
+	/*
+	 * Checking STS_EINT is not enough as there is a lag between a change
+	 * bit being set and the Port Status Change Event that it generated
+	 * being written to the Event Ring. See note in xhci 1.1 section 4.19.2.
+	 */
+
+	port_index = xhci->usb2_rhub.num_ports;
+	ports = xhci->usb2_rhub.ports;
+	while (port_index--) {
+		portsc = readl(ports[port_index]->addr);
+		if (portsc & PORT_CHANGE_MASK ||
+		    (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+			return true;
+	}
+	port_index = xhci->usb3_rhub.num_ports;
+	ports = xhci->usb3_rhub.ports;
+	while (port_index--) {
+		portsc = readl(ports[port_index]->addr);
+		if (portsc & PORT_CHANGE_MASK ||
+		    (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+			return true;
+	}
+	return false;
+}
+
+/*
+ * Stop HC (not bus-specific)
+ *
+ * This is called when the machine transition into S3/S4 mode.
+ *
+ */
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
+{
+	int			rc = 0;
+	unsigned int		delay = XHCI_MAX_HALT_USEC * 2;
+	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
+	u32			command;
+	u32			res;
+
+	if (!hcd->state)
+		return 0;
+
+	if (hcd->state != HC_STATE_SUSPENDED ||
+			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
+		return -EINVAL;
+
+	/* Clear root port wake on bits if wakeup not allowed. */
+	xhci_disable_hub_port_wake(xhci, &xhci->usb3_rhub, do_wakeup);
+	xhci_disable_hub_port_wake(xhci, &xhci->usb2_rhub, do_wakeup);
+
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return 0;
+
+	xhci_dbc_suspend(xhci);
+
+	/* Don't poll the roothubs on bus suspend. */
+	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
+	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	del_timer_sync(&hcd->rh_timer);
+	clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	del_timer_sync(&xhci->shared_hcd->rh_timer);
+
+	if (xhci->quirks & XHCI_SUSPEND_DELAY)
+		usleep_range(1000, 1500);
+
+	spin_lock_irq(&xhci->lock);
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+	/* step 1: stop endpoint */
+	/* skipped assuming that port suspend has done */
+
+	/* step 2: clear Run/Stop bit */
+	command = readl(&xhci->op_regs->command);
+	command &= ~CMD_RUN;
+	writel(command, &xhci->op_regs->command);
+
+	/* Some chips from Fresco Logic need an extraordinary delay */
+	delay *= (xhci->quirks & XHCI_SLOW_SUSPEND) ? 10 : 1;
+
+	if (xhci_handshake(&xhci->op_regs->status,
+		      STS_HALT, STS_HALT, delay)) {
+		xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
+		spin_unlock_irq(&xhci->lock);
+		return -ETIMEDOUT;
+	}
+	xhci_clear_command_ring(xhci);
+
+	/* step 3: save registers */
+	xhci_save_registers(xhci);
+
+	/* step 4: set CSS flag */
+	command = readl(&xhci->op_regs->command);
+	command |= CMD_CSS;
+	writel(command, &xhci->op_regs->command);
+	xhci->broken_suspend = 0;
+	if (xhci_handshake(&xhci->op_regs->status,
+				STS_SAVE, 0, 20 * 1000)) {
+	/*
+	 * AMD SNPS xHC 3.0 occasionally does not clear the
+	 * SSS bit of USBSTS and when driver tries to poll
+	 * to see if the xHC clears BIT(8) which never happens
+	 * and driver assumes that controller is not responding
+	 * and times out. To workaround this, its good to check
+	 * if SRE and HCE bits are not set (as per xhci
+	 * Section 5.4.2) and bypass the timeout.
+	 */
+		res = readl(&xhci->op_regs->status);
+		if ((xhci->quirks & XHCI_SNPS_BROKEN_SUSPEND) &&
+		    (((res & STS_SRE) == 0) &&
+				((res & STS_HCE) == 0))) {
+			xhci->broken_suspend = 1;
+		} else {
+			xhci_warn(xhci, "WARN: xHC save state timeout\n");
+			spin_unlock_irq(&xhci->lock);
+			return -ETIMEDOUT;
+		}
+	}
+	spin_unlock_irq(&xhci->lock);
+
+	/*
+	 * Deleting Compliance Mode Recovery Timer because the xHCI Host
+	 * is about to be suspended.
+	 */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+			(!(xhci_all_ports_seen_u0(xhci)))) {
+		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"%s: compliance mode recovery timer deleted",
+				__func__);
+	}
+
+	/* step 5: remove core well power */
+	/* synchronize irq when using MSI-X */
+	xhci_msix_sync_irqs(xhci);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(xhci_suspend);
+
+/*
+ * start xHC (not bus-specific)
+ *
+ * This is called when the machine transition from S3/S4 mode.
+ *
+ */
+int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
+{
+	u32			command, temp = 0;
+	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
+	struct usb_hcd		*secondary_hcd;
+	int			retval = 0;
+	bool			comp_timer_running = false;
+	bool			pending_portevent = false;
+	bool			reinit_xhc = false;
+
+	if (!hcd->state)
+		return 0;
+
+	/* Wait a bit if either of the roothubs need to settle from the
+	 * transition into bus suspend.
+	 */
+
+	if (time_before(jiffies, xhci->usb2_rhub.bus_state.next_statechange) ||
+	    time_before(jiffies, xhci->usb3_rhub.bus_state.next_statechange))
+		msleep(100);
+
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+
+	spin_lock_irq(&xhci->lock);
+
+	if (hibernated || xhci->quirks & XHCI_RESET_ON_RESUME || xhci->broken_suspend)
+		reinit_xhc = true;
+
+	if (!reinit_xhc) {
+		/*
+		 * Some controllers might lose power during suspend, so wait
+		 * for controller not ready bit to clear, just as in xHC init.
+		 */
+		retval = xhci_handshake(&xhci->op_regs->status,
+					STS_CNR, 0, 10 * 1000 * 1000);
+		if (retval) {
+			xhci_warn(xhci, "Controller not ready at resume %d\n",
+				  retval);
+			spin_unlock_irq(&xhci->lock);
+			return retval;
+		}
+		/* step 1: restore register */
+		xhci_restore_registers(xhci);
+		/* step 2: initialize command ring buffer */
+		xhci_set_cmd_ring_deq(xhci);
+		/* step 3: restore state and start state*/
+		/* step 3: set CRS flag */
+		command = readl(&xhci->op_regs->command);
+		command |= CMD_CRS;
+		writel(command, &xhci->op_regs->command);
+		/*
+		 * Some controllers take up to 55+ ms to complete the controller
+		 * restore so setting the timeout to 100ms. Xhci specification
+		 * doesn't mention any timeout value.
+		 */
+		if (xhci_handshake(&xhci->op_regs->status,
+			      STS_RESTORE, 0, 100 * 1000)) {
+			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
+			spin_unlock_irq(&xhci->lock);
+			return -ETIMEDOUT;
+		}
+	}
+
+	temp = readl(&xhci->op_regs->status);
+
+	/* re-initialize the HC on Restore Error, or Host Controller Error */
+	if (temp & (STS_SRE | STS_HCE)) {
+		reinit_xhc = true;
+		if (!xhci->broken_suspend)
+			xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp);
+	}
+
+	if (reinit_xhc) {
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				!(xhci_all_ports_seen_u0(xhci))) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Compliance Mode Recovery Timer deleted!");
+		}
+
+		/* Let the USB core know _both_ roothubs lost power. */
+		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
+		usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
+
+		xhci_dbg(xhci, "Stop HCD\n");
+		xhci_halt(xhci);
+		xhci_zero_64b_regs(xhci);
+		retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
+		spin_unlock_irq(&xhci->lock);
+		if (retval)
+			return retval;
+		xhci_cleanup_msix(xhci);
+
+		xhci_dbg(xhci, "// Disabling event ring interrupts\n");
+		temp = readl(&xhci->op_regs->status);
+		writel((temp & ~0x1fff) | STS_EINT, &xhci->op_regs->status);
+		temp = readl(&xhci->ir_set->irq_pending);
+		writel(ER_IRQ_DISABLE(temp), &xhci->ir_set->irq_pending);
+
+		xhci_dbg(xhci, "cleaning up memory\n");
+		xhci_mem_cleanup(xhci);
+		xhci_debugfs_exit(xhci);
+		xhci_dbg(xhci, "xhci_stop completed - status = %x\n",
+			    readl(&xhci->op_regs->status));
+
+		/* USB core calls the PCI reinit and start functions twice:
+		 * first with the primary HCD, and then with the secondary HCD.
+		 * If we don't do the same, the host will never be started.
+		 */
+		if (!usb_hcd_is_primary_hcd(hcd))
+			secondary_hcd = hcd;
+		else
+			secondary_hcd = xhci->shared_hcd;
+
+		xhci_dbg(xhci, "Initialize the xhci_hcd\n");
+		retval = xhci_init(hcd->primary_hcd);
+		if (retval)
+			return retval;
+		comp_timer_running = true;
+
+		xhci_dbg(xhci, "Start the primary HCD\n");
+		retval = xhci_run(hcd->primary_hcd);
+		if (!retval) {
+			xhci_dbg(xhci, "Start the secondary HCD\n");
+			retval = xhci_run(secondary_hcd);
+		}
+		hcd->state = HC_STATE_SUSPENDED;
+		xhci->shared_hcd->state = HC_STATE_SUSPENDED;
+		goto done;
+	}
+
+	/* step 4: set Run/Stop bit */
+	command = readl(&xhci->op_regs->command);
+	command |= CMD_RUN;
+	writel(command, &xhci->op_regs->command);
+	xhci_handshake(&xhci->op_regs->status, STS_HALT,
+		  0, 250 * 1000);
+
+	/* step 5: walk topology and initialize portsc,
+	 * portpmsc and portli
+	 */
+	/* this is done in bus_resume */
+
+	/* step 6: restart each of the previously
+	 * Running endpoints by ringing their doorbells
+	 */
+
+	spin_unlock_irq(&xhci->lock);
+
+	xhci_dbc_resume(xhci);
+
+ done:
+	if (retval == 0) {
+		/*
+		 * Resume roothubs only if there are pending events.
+		 * USB 3 devices resend U3 LFPS wake after a 100ms delay if
+		 * the first wake signalling failed, give it that chance.
+		 */
+		pending_portevent = xhci_pending_portevent(xhci);
+		if (!pending_portevent) {
+			msleep(120);
+			pending_portevent = xhci_pending_portevent(xhci);
+		}
+
+		if (pending_portevent) {
+			usb_hcd_resume_root_hub(xhci->shared_hcd);
+			usb_hcd_resume_root_hub(hcd);
+		}
+	}
+	/*
+	 * If system is subject to the Quirk, Compliance Mode Timer needs to
+	 * be re-initialized Always after a system resume. Ports are subject
+	 * to suffer the Compliance Mode issue again. It doesn't matter if
+	 * ports have entered previously to U0 before system's suspension.
+	 */
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
+		compliance_mode_recovery_timer_init(xhci);
+
+	if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL)
+		usb_asmedia_modifyflowcontrol(to_pci_dev(hcd->self.controller));
+
+	/* Re-enable port polling. */
+	xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
+	set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	usb_hcd_poll_rh_status(xhci->shared_hcd);
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(xhci_resume);
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Bypass the DMA mapping if URB is suitable for Immediate Transfer (IDT),
+ * we'll copy the actual data into the TRB address register. This is limited to
+ * transfers up to 8 bytes on output endpoints of any kind with wMaxPacketSize
+ * >= 8 bytes. If suitable for IDT only one Transfer TRB per TD is allowed.
+ */
+static int xhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				gfp_t mem_flags)
+{
+	if (xhci_urb_suitable_for_idt(urb))
+		return 0;
+
+	return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+}
+
+/*
+ * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and
+ * HCDs.  Find the index for an endpoint given its descriptor.  Use the return
+ * value to right shift 1 for the bitmask.
+ *
+ * Index  = (epnum * 2) + direction - 1,
+ * where direction = 0 for OUT, 1 for IN.
+ * For control endpoints, the IN index is used (OUT index is unused), so
+ * index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
+ */
+unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc)
+{
+	unsigned int index;
+	if (usb_endpoint_xfer_control(desc))
+		index = (unsigned int) (usb_endpoint_num(desc)*2);
+	else
+		index = (unsigned int) (usb_endpoint_num(desc)*2) +
+			(usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
+	return index;
+}
+
+/* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint
+ * address from the XHCI endpoint index.
+ */
+unsigned int xhci_get_endpoint_address(unsigned int ep_index)
+{
+	unsigned int number = DIV_ROUND_UP(ep_index, 2);
+	unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN;
+	return direction | number;
+}
+
+/* Find the flag for this endpoint (for use in the control context).  Use the
+ * endpoint index to create a bitmask.  The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+static unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc)
+{
+	return 1 << (xhci_get_endpoint_index(desc) + 1);
+}
+
+/* Find the flag for this endpoint (for use in the control context).  Use the
+ * endpoint index to create a bitmask.  The slot context is bit 0, endpoint 0 is
+ * bit 1, etc.
+ */
+static unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index)
+{
+	return 1 << (ep_index + 1);
+}
+
+/* Compute the last valid endpoint context index.  Basically, this is the
+ * endpoint index plus one.  For slot contexts with more than valid endpoint,
+ * we find the most significant bit set in the added contexts flags.
+ * e.g. ep 1 IN (with epnum 0x81) => added_ctxs = 0b1000
+ * fls(0b1000) = 4, but the endpoint context index is 3, so subtract one.
+ */
+unsigned int xhci_last_valid_endpoint(u32 added_ctxs)
+{
+	return fls(added_ctxs) - 1;
+}
+
+/* Returns 1 if the arguments are OK;
+ * returns 0 this is a root hub; returns -EINVAL for NULL pointers.
+ */
+static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint *ep, int check_ep, bool check_virt_dev,
+		const char *func) {
+	struct xhci_hcd	*xhci;
+	struct xhci_virt_device	*virt_dev;
+
+	if (!hcd || (check_ep && !ep) || !udev) {
+		pr_debug("xHCI %s called with invalid args\n", func);
+		return -EINVAL;
+	}
+	if (!udev->parent) {
+		pr_debug("xHCI %s called for root hub\n", func);
+		return 0;
+	}
+
+	xhci = hcd_to_xhci(hcd);
+	if (check_virt_dev) {
+		if (!udev->slot_id || !xhci->devs[udev->slot_id]) {
+			xhci_dbg(xhci, "xHCI %s called with unaddressed device\n",
+					func);
+			return -EINVAL;
+		}
+
+		virt_dev = xhci->devs[udev->slot_id];
+		if (virt_dev->udev != udev) {
+			xhci_dbg(xhci, "xHCI %s called with udev and "
+					  "virt_dev does not match\n", func);
+			return -EINVAL;
+		}
+	}
+
+	if (xhci->xhc_state & XHCI_STATE_HALTED)
+		return -ENODEV;
+
+	return 1;
+}
+
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct xhci_command *command,
+		bool ctx_change, bool must_succeed);
+
+/*
+ * Full speed devices may have a max packet size greater than 8 bytes, but the
+ * USB core doesn't know that until it reads the first 8 bytes of the
+ * descriptor.  If the usb_device's max packet size changes after that point,
+ * we need to issue an evaluate context command and wait on it.
+ */
+static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
+		unsigned int ep_index, struct urb *urb, gfp_t mem_flags)
+{
+	struct xhci_container_ctx *out_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_command *command;
+	int max_packet_size;
+	int hw_max_packet_size;
+	int ret = 0;
+
+	out_ctx = xhci->devs[slot_id]->out_ctx;
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+	hw_max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
+	max_packet_size = usb_endpoint_maxp(&urb->dev->ep0.desc);
+	if (hw_max_packet_size != max_packet_size) {
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"Max Packet Size for ep 0 changed.");
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"Max packet size in usb_device = %d",
+				max_packet_size);
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"Max packet size in xHCI HW = %d",
+				hw_max_packet_size);
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"Issuing evaluate context command.");
+
+		/* Set up the input context flags for the command */
+		/* FIXME: This won't work if a non-default control endpoint
+		 * changes max packet sizes.
+		 */
+
+		command = xhci_alloc_command(xhci, true, mem_flags);
+		if (!command)
+			return -ENOMEM;
+
+		command->in_ctx = xhci->devs[slot_id]->in_ctx;
+		ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+		if (!ctrl_ctx) {
+			xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+					__func__);
+			ret = -ENOMEM;
+			goto command_cleanup;
+		}
+		/* Set up the modified control endpoint 0 */
+		xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
+				xhci->devs[slot_id]->out_ctx, ep_index);
+
+		ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+		ep_ctx->ep_info &= cpu_to_le32(~EP_STATE_MASK);/* must clear */
+		ep_ctx->ep_info2 &= cpu_to_le32(~MAX_PACKET_MASK);
+		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet_size));
+
+		ctrl_ctx->add_flags = cpu_to_le32(EP0_FLAG);
+		ctrl_ctx->drop_flags = 0;
+
+		ret = xhci_configure_endpoint(xhci, urb->dev, command,
+				true, false);
+
+		/* Clean up the input context for later use by bandwidth
+		 * functions.
+		 */
+		ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG);
+command_cleanup:
+		kfree(command->completion);
+		kfree(command);
+	}
+	return ret;
+}
+
+/*
+ * non-error returns are a promise to giveback() the urb later
+ * we drop ownership so next owner (or urb unlink) can get it
+ */
+static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	unsigned long flags;
+	int ret = 0;
+	unsigned int slot_id, ep_index;
+	unsigned int *ep_state;
+	struct urb_priv	*urb_priv;
+	int num_tds;
+
+	if (!urb)
+		return -EINVAL;
+	ret = xhci_check_args(hcd, urb->dev, urb->ep,
+					true, true, __func__);
+	if (ret <= 0)
+		return ret ? ret : -EINVAL;
+
+	slot_id = urb->dev->slot_id;
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+	ep_state = &xhci->devs[slot_id]->eps[ep_index].ep_state;
+
+	if (!HCD_HW_ACCESSIBLE(hcd)) {
+		if (!in_interrupt())
+			xhci_dbg(xhci, "urb submitted during PCI suspend\n");
+		return -ESHUTDOWN;
+	}
+	if (xhci->devs[slot_id]->flags & VDEV_PORT_ERROR) {
+		xhci_dbg(xhci, "Can't queue urb, port error, link inactive\n");
+		return -ENODEV;
+	}
+
+	if (usb_endpoint_xfer_isoc(&urb->ep->desc))
+		num_tds = urb->number_of_packets;
+	else if (usb_endpoint_is_bulk_out(&urb->ep->desc) &&
+	    urb->transfer_buffer_length > 0 &&
+	    urb->transfer_flags & URB_ZERO_PACKET &&
+	    !(urb->transfer_buffer_length % usb_endpoint_maxp(&urb->ep->desc)))
+		num_tds = 2;
+	else
+		num_tds = 1;
+
+	urb_priv = kzalloc(struct_size(urb_priv, td, num_tds), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	urb_priv->num_tds = num_tds;
+	urb_priv->num_tds_done = 0;
+	urb->hcpriv = urb_priv;
+
+	trace_xhci_urb_enqueue(urb);
+
+	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		/* Check to see if the max packet size for the default control
+		 * endpoint changed during FS device enumeration
+		 */
+		if (urb->dev->speed == USB_SPEED_FULL) {
+			ret = xhci_check_maxpacket(xhci, slot_id,
+					ep_index, urb, mem_flags);
+			if (ret < 0) {
+				xhci_urb_free_priv(urb_priv);
+				urb->hcpriv = NULL;
+				return ret;
+			}
+		}
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (xhci->xhc_state & XHCI_STATE_DYING) {
+		xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\n",
+			 urb->ep->desc.bEndpointAddress, urb);
+		ret = -ESHUTDOWN;
+		goto free_priv;
+	}
+	if (*ep_state & (EP_GETTING_STREAMS | EP_GETTING_NO_STREAMS)) {
+		xhci_warn(xhci, "WARN: Can't enqueue URB, ep in streams transition state %x\n",
+			  *ep_state);
+		ret = -EINVAL;
+		goto free_priv;
+	}
+	if (*ep_state & EP_SOFT_CLEAR_TOGGLE) {
+		xhci_warn(xhci, "Can't enqueue URB while manually clearing toggle\n");
+		ret = -EINVAL;
+		goto free_priv;
+	}
+
+	switch (usb_endpoint_type(&urb->ep->desc)) {
+
+	case USB_ENDPOINT_XFER_CONTROL:
+		ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
+					 slot_id, ep_index);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
+					 slot_id, ep_index);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		ret = xhci_queue_intr_tx(xhci, GFP_ATOMIC, urb,
+				slot_id, ep_index);
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb,
+				slot_id, ep_index);
+	}
+
+	if (ret) {
+free_priv:
+		xhci_urb_free_priv(urb_priv);
+		urb->hcpriv = NULL;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return ret;
+}
+
+/*
+ * Remove the URB's TD from the endpoint ring.  This may cause the HC to stop
+ * USB transfers, potentially stopping in the middle of a TRB buffer.  The HC
+ * should pick up where it left off in the TD, unless a Set Transfer Ring
+ * Dequeue Pointer is issued.
+ *
+ * The TRBs that make up the buffers for the canceled URB will be "removed" from
+ * the ring.  Since the ring is a contiguous structure, they can't be physically
+ * removed.  Instead, there are two options:
+ *
+ *  1) If the HC is in the middle of processing the URB to be canceled, we
+ *     simply move the ring's dequeue pointer past those TRBs using the Set
+ *     Transfer Ring Dequeue Pointer command.  This will be the common case,
+ *     when drivers timeout on the last submitted URB and attempt to cancel.
+ *
+ *  2) If the HC is in the middle of a different TD, we turn the TRBs into a
+ *     series of 1-TRB transfer no-op TDs.  (No-ops shouldn't be chained.)  The
+ *     HC will need to invalidate the any TRBs it has cached after the stop
+ *     endpoint command, as noted in the xHCI 0.95 errata.
+ *
+ *  3) The TD may have completed by the time the Stop Endpoint Command
+ *     completes, so software needs to handle that case too.
+ *
+ * This function should protect against the TD enqueueing code ringing the
+ * doorbell while this code is waiting for a Stop Endpoint command to complete.
+ * It also needs to account for multiple cancellations on happening at the same
+ * time for the same endpoint.
+ *
+ * Note that this function can be called in any context, or so says
+ * usb_hcd_unlink_urb()
+ */
+static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	unsigned long flags;
+	int ret, i;
+	u32 temp;
+	struct xhci_hcd *xhci;
+	struct urb_priv	*urb_priv;
+	struct xhci_td *td;
+	unsigned int ep_index;
+	struct xhci_ring *ep_ring;
+	struct xhci_virt_ep *ep;
+	struct xhci_command *command;
+	struct xhci_virt_device *vdev;
+
+	xhci = hcd_to_xhci(hcd);
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	trace_xhci_urb_dequeue(urb);
+
+	/* Make sure the URB hasn't completed or been unlinked already */
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto done;
+
+	/* give back URB now if we can't queue it for cancel */
+	vdev = xhci->devs[urb->dev->slot_id];
+	urb_priv = urb->hcpriv;
+	if (!vdev || !urb_priv)
+		goto err_giveback;
+
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+	ep = &vdev->eps[ep_index];
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep || !ep_ring)
+		goto err_giveback;
+
+	/* If xHC is dead take it down and return ALL URBs in xhci_hc_died() */
+	temp = readl(&xhci->op_regs->status);
+	if (temp == ~(u32)0 || xhci->xhc_state & XHCI_STATE_DYING) {
+		xhci_hc_died(xhci);
+		goto done;
+	}
+
+	/*
+	 * check ring is not re-allocated since URB was enqueued. If it is, then
+	 * make sure none of the ring related pointers in this URB private data
+	 * are touched, such as td_list, otherwise we overwrite freed data
+	 */
+	if (!td_on_ring(&urb_priv->td[0], ep_ring)) {
+		xhci_err(xhci, "Canceled URB td not found on endpoint ring");
+		for (i = urb_priv->num_tds_done; i < urb_priv->num_tds; i++) {
+			td = &urb_priv->td[i];
+			if (!list_empty(&td->cancelled_td_list))
+				list_del_init(&td->cancelled_td_list);
+		}
+		goto err_giveback;
+	}
+
+	if (xhci->xhc_state & XHCI_STATE_HALTED) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+				"HC halted, freeing TD manually.");
+		for (i = urb_priv->num_tds_done;
+		     i < urb_priv->num_tds;
+		     i++) {
+			td = &urb_priv->td[i];
+			if (!list_empty(&td->td_list))
+				list_del_init(&td->td_list);
+			if (!list_empty(&td->cancelled_td_list))
+				list_del_init(&td->cancelled_td_list);
+		}
+		goto err_giveback;
+	}
+
+	i = urb_priv->num_tds_done;
+	if (i < urb_priv->num_tds)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+				"Cancel URB %p, dev %s, ep 0x%x, "
+				"starting at offset 0x%llx",
+				urb, urb->dev->devpath,
+				urb->ep->desc.bEndpointAddress,
+				(unsigned long long) xhci_trb_virt_to_dma(
+					urb_priv->td[i].start_seg,
+					urb_priv->td[i].first_trb));
+
+	for (; i < urb_priv->num_tds; i++) {
+		td = &urb_priv->td[i];
+		list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
+	}
+
+	/* Queue a stop endpoint command, but only if this is
+	 * the first cancellation to be handled.
+	 */
+	if (!(ep->ep_state & EP_STOP_CMD_PENDING)) {
+		command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
+		if (!command) {
+			ret = -ENOMEM;
+			goto done;
+		}
+		ep->ep_state |= EP_STOP_CMD_PENDING;
+		ep->stop_cmd_timer.expires = jiffies +
+			XHCI_STOP_EP_CMD_TIMEOUT * HZ;
+		add_timer(&ep->stop_cmd_timer);
+		xhci_queue_stop_endpoint(xhci, command, urb->dev->slot_id,
+					 ep_index, 0);
+		xhci_ring_cmd_db(xhci);
+	}
+done:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return ret;
+
+err_giveback:
+	if (urb_priv)
+		xhci_urb_free_priv(urb_priv);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN);
+	return ret;
+}
+
+/* Drop an endpoint from a new bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint that is being
+ * disabled, so there's no need for mutual exclusion to protect
+ * the xhci->devs[slot_id] structure.
+ */
+static int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_container_ctx *in_ctx, *out_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	unsigned int ep_index;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 drop_flag;
+	u32 new_add_flags, new_drop_flags;
+	int ret;
+
+	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	if (xhci->xhc_state & XHCI_STATE_DYING)
+		return -ENODEV;
+
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	drop_flag = xhci_get_endpoint_flag(&ep->desc);
+	if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
+		xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
+				__func__, drop_flag);
+		return 0;
+	}
+
+	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+	out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return 0;
+	}
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+	/* If the HC already knows the endpoint is disabled,
+	 * or the HCD has noted it is disabled, ignore this request
+	 */
+	if ((GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) ||
+	    le32_to_cpu(ctrl_ctx->drop_flags) &
+	    xhci_get_endpoint_flag(&ep->desc)) {
+		/* Do not warn when called after a usb_device_reset */
+		if (xhci->devs[udev->slot_id]->eps[ep_index].ring != NULL)
+			xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
+				  __func__, ep);
+		return 0;
+	}
+
+	ctrl_ctx->drop_flags |= cpu_to_le32(drop_flag);
+	new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
+
+	ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag);
+	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+	xhci_debugfs_remove_endpoint(xhci, xhci->devs[udev->slot_id], ep_index);
+
+	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+
+	if (xhci->quirks & XHCI_MTK_HOST)
+		xhci_mtk_drop_ep_quirk(hcd, udev, ep);
+
+	xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+			(unsigned int) ep->desc.bEndpointAddress,
+			udev->slot_id,
+			(unsigned int) new_drop_flags,
+			(unsigned int) new_add_flags);
+	return 0;
+}
+
+/* Add an endpoint to a new possible bandwidth configuration for this device.
+ * Only one call to this function is allowed per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * A call to xhci_drop_endpoint() followed by a call to xhci_add_endpoint() will
+ * add the endpoint to the schedule with possibly new parameters denoted by a
+ * different endpoint descriptor in usb_host_endpoint.
+ * A call to xhci_add_endpoint() followed by a call to xhci_drop_endpoint() is
+ * not allowed.
+ *
+ * The USB core will not allow URBs to be queued to an endpoint until the
+ * configuration or alt setting is installed in the device, so there's no need
+ * for mutual exclusion to protect the xhci->devs[slot_id] structure.
+ */
+static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_container_ctx *in_ctx;
+	unsigned int ep_index;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 added_ctxs;
+	u32 new_add_flags, new_drop_flags;
+	struct xhci_virt_device *virt_dev;
+	int ret = 0;
+
+	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
+	if (ret <= 0) {
+		/* So we won't queue a reset ep command for a root hub */
+		ep->hcpriv = NULL;
+		return ret;
+	}
+	xhci = hcd_to_xhci(hcd);
+	if (xhci->xhc_state & XHCI_STATE_DYING)
+		return -ENODEV;
+
+	added_ctxs = xhci_get_endpoint_flag(&ep->desc);
+	if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
+		/* FIXME when we have to issue an evaluate endpoint command to
+		 * deal with ep0 max packet size changing once we get the
+		 * descriptors
+		 */
+		xhci_dbg(xhci, "xHCI %s - can't add slot or ep 0 %#x\n",
+				__func__, added_ctxs);
+		return 0;
+	}
+
+	virt_dev = xhci->devs[udev->slot_id];
+	in_ctx = virt_dev->in_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return 0;
+	}
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	/* If this endpoint is already in use, and the upper layers are trying
+	 * to add it again without dropping it, reject the addition.
+	 */
+	if (virt_dev->eps[ep_index].ring &&
+			!(le32_to_cpu(ctrl_ctx->drop_flags) & added_ctxs)) {
+		xhci_warn(xhci, "Trying to add endpoint 0x%x "
+				"without dropping it.\n",
+				(unsigned int) ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+
+	/* If the HCD has already noted the endpoint is enabled,
+	 * ignore this request.
+	 */
+	if (le32_to_cpu(ctrl_ctx->add_flags) & added_ctxs) {
+		xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
+				__func__, ep);
+		return 0;
+	}
+
+	/*
+	 * Configuration and alternate setting changes must be done in
+	 * process context, not interrupt context (or so documenation
+	 * for usb_set_interface() and usb_set_configuration() claim).
+	 */
+	if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
+		dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
+				__func__, ep->desc.bEndpointAddress);
+		return -ENOMEM;
+	}
+
+	if (xhci->quirks & XHCI_MTK_HOST) {
+		ret = xhci_mtk_add_ep_quirk(hcd, udev, ep);
+		if (ret < 0) {
+			xhci_ring_free(xhci, virt_dev->eps[ep_index].new_ring);
+			virt_dev->eps[ep_index].new_ring = NULL;
+			return ret;
+		}
+	}
+
+	ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
+	new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
+
+	/* If xhci_endpoint_disable() was called for this endpoint, but the
+	 * xHC hasn't been notified yet through the check_bandwidth() call,
+	 * this re-adds a new state for the endpoint from the new endpoint
+	 * descriptors.  We must drop and re-add this endpoint, so we leave the
+	 * drop flags alone.
+	 */
+	new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
+
+	/* Store the usb_device pointer for later use */
+	ep->hcpriv = udev;
+
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+	trace_xhci_add_endpoint(ep_ctx);
+
+	xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
+			(unsigned int) ep->desc.bEndpointAddress,
+			udev->slot_id,
+			(unsigned int) new_drop_flags,
+			(unsigned int) new_add_flags);
+	return 0;
+}
+
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
+{
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	int i;
+
+	ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return;
+	}
+
+	/* When a device's add flag and drop flag are zero, any subsequent
+	 * configure endpoint command will leave that endpoint's state
+	 * untouched.  Make sure we don't leave any old state in the input
+	 * endpoint contexts.
+	 */
+	ctrl_ctx->drop_flags = 0;
+	ctrl_ctx->add_flags = 0;
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+	/* Endpoint 0 is always valid */
+	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
+	for (i = 1; i < 31; i++) {
+		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
+		ep_ctx->ep_info = 0;
+		ep_ctx->ep_info2 = 0;
+		ep_ctx->deq = 0;
+		ep_ctx->tx_info = 0;
+	}
+}
+
+static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
+		struct usb_device *udev, u32 *cmd_status)
+{
+	int ret;
+
+	switch (*cmd_status) {
+	case COMP_COMMAND_ABORTED:
+	case COMP_COMMAND_RING_STOPPED:
+		xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n");
+		ret = -ETIME;
+		break;
+	case COMP_RESOURCE_ERROR:
+		dev_warn(&udev->dev,
+			 "Not enough host controller resources for new device state.\n");
+		ret = -ENOMEM;
+		/* FIXME: can we allocate more resources for the HC? */
+		break;
+	case COMP_BANDWIDTH_ERROR:
+	case COMP_SECONDARY_BANDWIDTH_ERROR:
+		dev_warn(&udev->dev,
+			 "Not enough bandwidth for new device state.\n");
+		ret = -ENOSPC;
+		/* FIXME: can we go back to the old state? */
+		break;
+	case COMP_TRB_ERROR:
+		/* the HCD set up something wrong */
+		dev_warn(&udev->dev, "ERROR: Endpoint drop flag = 0, "
+				"add flag = 1, "
+				"and endpoint is not disabled.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		dev_warn(&udev->dev,
+			 "ERROR: Incompatible device for endpoint configure command.\n");
+		ret = -ENODEV;
+		break;
+	case COMP_SUCCESS:
+		xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+				"Successful Endpoint Configure command");
+		ret = 0;
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion code 0x%x.\n",
+				*cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
+		struct usb_device *udev, u32 *cmd_status)
+{
+	int ret;
+
+	switch (*cmd_status) {
+	case COMP_COMMAND_ABORTED:
+	case COMP_COMMAND_RING_STOPPED:
+		xhci_warn(xhci, "Timeout while waiting for evaluate context command\n");
+		ret = -ETIME;
+		break;
+	case COMP_PARAMETER_ERROR:
+		dev_warn(&udev->dev,
+			 "WARN: xHCI driver setup invalid evaluate context command.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_SLOT_NOT_ENABLED_ERROR:
+		dev_warn(&udev->dev,
+			"WARN: slot not enabled for evaluate context command.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_CONTEXT_STATE_ERROR:
+		dev_warn(&udev->dev,
+			"WARN: invalid context state for evaluate context command.\n");
+		ret = -EINVAL;
+		break;
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		dev_warn(&udev->dev,
+			"ERROR: Incompatible device for evaluate context command.\n");
+		ret = -ENODEV;
+		break;
+	case COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR:
+		/* Max Exit Latency too large error */
+		dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n");
+		ret = -EINVAL;
+		break;
+	case COMP_SUCCESS:
+		xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+				"Successful evaluate context command");
+		ret = 0;
+		break;
+	default:
+		xhci_err(xhci, "ERROR: unexpected command completion code 0x%x.\n",
+			*cmd_status);
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 valid_add_flags;
+	u32 valid_drop_flags;
+
+	/* Ignore the slot flag (bit 0), and the default control endpoint flag
+	 * (bit 1).  The default control endpoint is added during the Address
+	 * Device command and is never removed until the slot is disabled.
+	 */
+	valid_add_flags = le32_to_cpu(ctrl_ctx->add_flags) >> 2;
+	valid_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags) >> 2;
+
+	/* Use hweight32 to count the number of ones in the add flags, or
+	 * number of endpoints added.  Don't count endpoints that are changed
+	 * (both added and dropped).
+	 */
+	return hweight32(valid_add_flags) -
+		hweight32(valid_add_flags & valid_drop_flags);
+}
+
+static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 valid_add_flags;
+	u32 valid_drop_flags;
+
+	valid_add_flags = le32_to_cpu(ctrl_ctx->add_flags) >> 2;
+	valid_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags) >> 2;
+
+	return hweight32(valid_drop_flags) -
+		hweight32(valid_add_flags & valid_drop_flags);
+}
+
+/*
+ * We need to reserve the new number of endpoints before the configure endpoint
+ * command completes.  We can't subtract the dropped endpoints from the number
+ * of active endpoints until the command completes because we can oversubscribe
+ * the host in this case:
+ *
+ *  - the first configure endpoint command drops more endpoints than it adds
+ *  - a second configure endpoint command that adds more endpoints is queued
+ *  - the first configure endpoint command fails, so the config is unchanged
+ *  - the second command may succeed, even though there isn't enough resources
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 added_eps;
+
+	added_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx);
+	if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Not enough ep ctxs: "
+				"%u active, need to add %u, limit is %u.",
+				xhci->num_active_eps, added_eps,
+				xhci->limit_active_eps);
+		return -ENOMEM;
+	}
+	xhci->num_active_eps += added_eps;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"Adding %u ep ctxs, %u now active.", added_eps,
+			xhci->num_active_eps);
+	return 0;
+}
+
+/*
+ * The configure endpoint was failed by the xHC for some other reason, so we
+ * need to revert the resources that failed configuration would have used.
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_free_host_resources(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 num_failed_eps;
+
+	num_failed_eps = xhci_count_num_new_endpoints(xhci, ctrl_ctx);
+	xhci->num_active_eps -= num_failed_eps;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"Removing %u failed ep ctxs, %u now active.",
+			num_failed_eps,
+			xhci->num_active_eps);
+}
+
+/*
+ * Now that the command has completed, clean up the active endpoint count by
+ * subtracting out the endpoints that were dropped (but not changed).
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
+		struct xhci_input_control_ctx *ctrl_ctx)
+{
+	u32 num_dropped_eps;
+
+	num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, ctrl_ctx);
+	xhci->num_active_eps -= num_dropped_eps;
+	if (num_dropped_eps)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Removing %u dropped ep ctxs, %u now active.",
+				num_dropped_eps,
+				xhci->num_active_eps);
+}
+
+static unsigned int xhci_get_block_size(struct usb_device *udev)
+{
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		return FS_BLOCK;
+	case USB_SPEED_HIGH:
+		return HS_BLOCK;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		return SS_BLOCK;
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+	default:
+		/* Should never happen */
+		return 1;
+	}
+}
+
+static unsigned int
+xhci_get_largest_overhead(struct xhci_interval_bw *interval_bw)
+{
+	if (interval_bw->overhead[LS_OVERHEAD_TYPE])
+		return LS_OVERHEAD;
+	if (interval_bw->overhead[FS_OVERHEAD_TYPE])
+		return FS_OVERHEAD;
+	return HS_OVERHEAD;
+}
+
+/* If we are changing a LS/FS device under a HS hub,
+ * make sure (if we are activating a new TT) that the HS bus has enough
+ * bandwidth for this new TT.
+ */
+static int xhci_check_tt_bw_table(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	struct xhci_interval_bw_table *bw_table;
+	struct xhci_tt_bw_info *tt_info;
+
+	/* Find the bandwidth table for the root port this TT is attached to. */
+	bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table;
+	tt_info = virt_dev->tt_info;
+	/* If this TT already had active endpoints, the bandwidth for this TT
+	 * has already been added.  Removing all periodic endpoints (and thus
+	 * making the TT enactive) will only decrease the bandwidth used.
+	 */
+	if (old_active_eps)
+		return 0;
+	if (old_active_eps == 0 && tt_info->active_eps != 0) {
+		if (bw_table->bw_used + TT_HS_OVERHEAD > HS_BW_LIMIT)
+			return -ENOMEM;
+		return 0;
+	}
+	/* Not sure why we would have no new active endpoints...
+	 *
+	 * Maybe because of an Evaluate Context change for a hub update or a
+	 * control endpoint 0 max packet size change?
+	 * FIXME: skip the bandwidth calculation in that case.
+	 */
+	return 0;
+}
+
+static int xhci_check_ss_bw(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev)
+{
+	unsigned int bw_reserved;
+
+	bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_IN, 100);
+	if (virt_dev->bw_table->ss_bw_in > (SS_BW_LIMIT_IN - bw_reserved))
+		return -ENOMEM;
+
+	bw_reserved = DIV_ROUND_UP(SS_BW_RESERVED*SS_BW_LIMIT_OUT, 100);
+	if (virt_dev->bw_table->ss_bw_out > (SS_BW_LIMIT_OUT - bw_reserved))
+		return -ENOMEM;
+
+	return 0;
+}
+
+/*
+ * This algorithm is a very conservative estimate of the worst-case scheduling
+ * scenario for any one interval.  The hardware dynamically schedules the
+ * packets, so we can't tell which microframe could be the limiting factor in
+ * the bandwidth scheduling.  This only takes into account periodic endpoints.
+ *
+ * Obviously, we can't solve an NP complete problem to find the minimum worst
+ * case scenario.  Instead, we come up with an estimate that is no less than
+ * the worst case bandwidth used for any one microframe, but may be an
+ * over-estimate.
+ *
+ * We walk the requirements for each endpoint by interval, starting with the
+ * smallest interval, and place packets in the schedule where there is only one
+ * possible way to schedule packets for that interval.  In order to simplify
+ * this algorithm, we record the largest max packet size for each interval, and
+ * assume all packets will be that size.
+ *
+ * For interval 0, we obviously must schedule all packets for each interval.
+ * The bandwidth for interval 0 is just the amount of data to be transmitted
+ * (the sum of all max ESIT payload sizes, plus any overhead per packet times
+ * the number of packets).
+ *
+ * For interval 1, we have two possible microframes to schedule those packets
+ * in.  For this algorithm, if we can schedule the same number of packets for
+ * each possible scheduling opportunity (each microframe), we will do so.  The
+ * remaining number of packets will be saved to be transmitted in the gaps in
+ * the next interval's scheduling sequence.
+ *
+ * As we move those remaining packets to be scheduled with interval 2 packets,
+ * we have to double the number of remaining packets to transmit.  This is
+ * because the intervals are actually powers of 2, and we would be transmitting
+ * the previous interval's packets twice in this interval.  We also have to be
+ * sure that when we look at the largest max packet size for this interval, we
+ * also look at the largest max packet size for the remaining packets and take
+ * the greater of the two.
+ *
+ * The algorithm continues to evenly distribute packets in each scheduling
+ * opportunity, and push the remaining packets out, until we get to the last
+ * interval.  Then those packets and their associated overhead are just added
+ * to the bandwidth used.
+ */
+static int xhci_check_bw_table(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	unsigned int bw_reserved;
+	unsigned int max_bandwidth;
+	unsigned int bw_used;
+	unsigned int block_size;
+	struct xhci_interval_bw_table *bw_table;
+	unsigned int packet_size = 0;
+	unsigned int overhead = 0;
+	unsigned int packets_transmitted = 0;
+	unsigned int packets_remaining = 0;
+	unsigned int i;
+
+	if (virt_dev->udev->speed >= USB_SPEED_SUPER)
+		return xhci_check_ss_bw(xhci, virt_dev);
+
+	if (virt_dev->udev->speed == USB_SPEED_HIGH) {
+		max_bandwidth = HS_BW_LIMIT;
+		/* Convert percent of bus BW reserved to blocks reserved */
+		bw_reserved = DIV_ROUND_UP(HS_BW_RESERVED * max_bandwidth, 100);
+	} else {
+		max_bandwidth = FS_BW_LIMIT;
+		bw_reserved = DIV_ROUND_UP(FS_BW_RESERVED * max_bandwidth, 100);
+	}
+
+	bw_table = virt_dev->bw_table;
+	/* We need to translate the max packet size and max ESIT payloads into
+	 * the units the hardware uses.
+	 */
+	block_size = xhci_get_block_size(virt_dev->udev);
+
+	/* If we are manipulating a LS/FS device under a HS hub, double check
+	 * that the HS bus has enough bandwidth if we are activing a new TT.
+	 */
+	if (virt_dev->tt_info) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Recalculating BW for rootport %u",
+				virt_dev->real_port);
+		if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) {
+			xhci_warn(xhci, "Not enough bandwidth on HS bus for "
+					"newly activated TT.\n");
+			return -ENOMEM;
+		}
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Recalculating BW for TT slot %u port %u",
+				virt_dev->tt_info->slot_id,
+				virt_dev->tt_info->ttport);
+	} else {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Recalculating BW for rootport %u",
+				virt_dev->real_port);
+	}
+
+	/* Add in how much bandwidth will be used for interval zero, or the
+	 * rounded max ESIT payload + number of packets * largest overhead.
+	 */
+	bw_used = DIV_ROUND_UP(bw_table->interval0_esit_payload, block_size) +
+		bw_table->interval_bw[0].num_packets *
+		xhci_get_largest_overhead(&bw_table->interval_bw[0]);
+
+	for (i = 1; i < XHCI_MAX_INTERVAL; i++) {
+		unsigned int bw_added;
+		unsigned int largest_mps;
+		unsigned int interval_overhead;
+
+		/*
+		 * How many packets could we transmit in this interval?
+		 * If packets didn't fit in the previous interval, we will need
+		 * to transmit that many packets twice within this interval.
+		 */
+		packets_remaining = 2 * packets_remaining +
+			bw_table->interval_bw[i].num_packets;
+
+		/* Find the largest max packet size of this or the previous
+		 * interval.
+		 */
+		if (list_empty(&bw_table->interval_bw[i].endpoints))
+			largest_mps = 0;
+		else {
+			struct xhci_virt_ep *virt_ep;
+			struct list_head *ep_entry;
+
+			ep_entry = bw_table->interval_bw[i].endpoints.next;
+			virt_ep = list_entry(ep_entry,
+					struct xhci_virt_ep, bw_endpoint_list);
+			/* Convert to blocks, rounding up */
+			largest_mps = DIV_ROUND_UP(
+					virt_ep->bw_info.max_packet_size,
+					block_size);
+		}
+		if (largest_mps > packet_size)
+			packet_size = largest_mps;
+
+		/* Use the larger overhead of this or the previous interval. */
+		interval_overhead = xhci_get_largest_overhead(
+				&bw_table->interval_bw[i]);
+		if (interval_overhead > overhead)
+			overhead = interval_overhead;
+
+		/* How many packets can we evenly distribute across
+		 * (1 << (i + 1)) possible scheduling opportunities?
+		 */
+		packets_transmitted = packets_remaining >> (i + 1);
+
+		/* Add in the bandwidth used for those scheduled packets */
+		bw_added = packets_transmitted * (overhead + packet_size);
+
+		/* How many packets do we have remaining to transmit? */
+		packets_remaining = packets_remaining % (1 << (i + 1));
+
+		/* What largest max packet size should those packets have? */
+		/* If we've transmitted all packets, don't carry over the
+		 * largest packet size.
+		 */
+		if (packets_remaining == 0) {
+			packet_size = 0;
+			overhead = 0;
+		} else if (packets_transmitted > 0) {
+			/* Otherwise if we do have remaining packets, and we've
+			 * scheduled some packets in this interval, take the
+			 * largest max packet size from endpoints with this
+			 * interval.
+			 */
+			packet_size = largest_mps;
+			overhead = interval_overhead;
+		}
+		/* Otherwise carry over packet_size and overhead from the last
+		 * time we had a remainder.
+		 */
+		bw_used += bw_added;
+		if (bw_used > max_bandwidth) {
+			xhci_warn(xhci, "Not enough bandwidth. "
+					"Proposed: %u, Max: %u\n",
+				bw_used, max_bandwidth);
+			return -ENOMEM;
+		}
+	}
+	/*
+	 * Ok, we know we have some packets left over after even-handedly
+	 * scheduling interval 15.  We don't know which microframes they will
+	 * fit into, so we over-schedule and say they will be scheduled every
+	 * microframe.
+	 */
+	if (packets_remaining > 0)
+		bw_used += overhead + packet_size;
+
+	if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) {
+		unsigned int port_index = virt_dev->real_port - 1;
+
+		/* OK, we're manipulating a HS device attached to a
+		 * root port bandwidth domain.  Include the number of active TTs
+		 * in the bandwidth used.
+		 */
+		bw_used += TT_HS_OVERHEAD *
+			xhci->rh_bw[port_index].num_active_tts;
+	}
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+		"Final bandwidth: %u, Limit: %u, Reserved: %u, "
+		"Available: %u " "percent",
+		bw_used, max_bandwidth, bw_reserved,
+		(max_bandwidth - bw_used - bw_reserved) * 100 /
+		max_bandwidth);
+
+	bw_used += bw_reserved;
+	if (bw_used > max_bandwidth) {
+		xhci_warn(xhci, "Not enough bandwidth. Proposed: %u, Max: %u\n",
+				bw_used, max_bandwidth);
+		return -ENOMEM;
+	}
+
+	bw_table->bw_used = bw_used;
+	return 0;
+}
+
+static bool xhci_is_async_ep(unsigned int ep_type)
+{
+	return (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP &&
+					ep_type != ISOC_IN_EP &&
+					ep_type != INT_IN_EP);
+}
+
+static bool xhci_is_sync_in_ep(unsigned int ep_type)
+{
+	return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP);
+}
+
+static unsigned int xhci_get_ss_bw_consumed(struct xhci_bw_info *ep_bw)
+{
+	unsigned int mps = DIV_ROUND_UP(ep_bw->max_packet_size, SS_BLOCK);
+
+	if (ep_bw->ep_interval == 0)
+		return SS_OVERHEAD_BURST +
+			(ep_bw->mult * ep_bw->num_packets *
+					(SS_OVERHEAD + mps));
+	return DIV_ROUND_UP(ep_bw->mult * ep_bw->num_packets *
+				(SS_OVERHEAD + mps + SS_OVERHEAD_BURST),
+				1 << ep_bw->ep_interval);
+
+}
+
+static void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info)
+{
+	struct xhci_interval_bw	*interval_bw;
+	int normalized_interval;
+
+	if (xhci_is_async_ep(ep_bw->type))
+		return;
+
+	if (udev->speed >= USB_SPEED_SUPER) {
+		if (xhci_is_sync_in_ep(ep_bw->type))
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_in -=
+				xhci_get_ss_bw_consumed(ep_bw);
+		else
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_out -=
+				xhci_get_ss_bw_consumed(ep_bw);
+		return;
+	}
+
+	/* SuperSpeed endpoints never get added to intervals in the table, so
+	 * this check is only valid for HS/FS/LS devices.
+	 */
+	if (list_empty(&virt_ep->bw_endpoint_list))
+		return;
+	/* For LS/FS devices, we need to translate the interval expressed in
+	 * microframes to frames.
+	 */
+	if (udev->speed == USB_SPEED_HIGH)
+		normalized_interval = ep_bw->ep_interval;
+	else
+		normalized_interval = ep_bw->ep_interval - 3;
+
+	if (normalized_interval == 0)
+		bw_table->interval0_esit_payload -= ep_bw->max_esit_payload;
+	interval_bw = &bw_table->interval_bw[normalized_interval];
+	interval_bw->num_packets -= ep_bw->num_packets;
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		interval_bw->overhead[LS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_FULL:
+		interval_bw->overhead[FS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_HIGH:
+		interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+		/* Should never happen because only LS/FS/HS endpoints will get
+		 * added to the endpoint list.
+		 */
+		return;
+	}
+	if (tt_info)
+		tt_info->active_eps -= 1;
+	list_del_init(&virt_ep->bw_endpoint_list);
+}
+
+static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci,
+		struct xhci_bw_info *ep_bw,
+		struct xhci_interval_bw_table *bw_table,
+		struct usb_device *udev,
+		struct xhci_virt_ep *virt_ep,
+		struct xhci_tt_bw_info *tt_info)
+{
+	struct xhci_interval_bw	*interval_bw;
+	struct xhci_virt_ep *smaller_ep;
+	int normalized_interval;
+
+	if (xhci_is_async_ep(ep_bw->type))
+		return;
+
+	if (udev->speed == USB_SPEED_SUPER) {
+		if (xhci_is_sync_in_ep(ep_bw->type))
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_in +=
+				xhci_get_ss_bw_consumed(ep_bw);
+		else
+			xhci->devs[udev->slot_id]->bw_table->ss_bw_out +=
+				xhci_get_ss_bw_consumed(ep_bw);
+		return;
+	}
+
+	/* For LS/FS devices, we need to translate the interval expressed in
+	 * microframes to frames.
+	 */
+	if (udev->speed == USB_SPEED_HIGH)
+		normalized_interval = ep_bw->ep_interval;
+	else
+		normalized_interval = ep_bw->ep_interval - 3;
+
+	if (normalized_interval == 0)
+		bw_table->interval0_esit_payload += ep_bw->max_esit_payload;
+	interval_bw = &bw_table->interval_bw[normalized_interval];
+	interval_bw->num_packets += ep_bw->num_packets;
+	switch (udev->speed) {
+	case USB_SPEED_LOW:
+		interval_bw->overhead[LS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_FULL:
+		interval_bw->overhead[FS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_HIGH:
+		interval_bw->overhead[HS_OVERHEAD_TYPE] += 1;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_UNKNOWN:
+	case USB_SPEED_WIRELESS:
+		/* Should never happen because only LS/FS/HS endpoints will get
+		 * added to the endpoint list.
+		 */
+		return;
+	}
+
+	if (tt_info)
+		tt_info->active_eps += 1;
+	/* Insert the endpoint into the list, largest max packet size first. */
+	list_for_each_entry(smaller_ep, &interval_bw->endpoints,
+			bw_endpoint_list) {
+		if (ep_bw->max_packet_size >=
+				smaller_ep->bw_info.max_packet_size) {
+			/* Add the new ep before the smaller endpoint */
+			list_add_tail(&virt_ep->bw_endpoint_list,
+					&smaller_ep->bw_endpoint_list);
+			return;
+		}
+	}
+	/* Add the new endpoint at the end of the list. */
+	list_add_tail(&virt_ep->bw_endpoint_list,
+			&interval_bw->endpoints);
+}
+
+void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		int old_active_eps)
+{
+	struct xhci_root_port_bw_info *rh_bw_info;
+	if (!virt_dev->tt_info)
+		return;
+
+	rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1];
+	if (old_active_eps == 0 &&
+				virt_dev->tt_info->active_eps != 0) {
+		rh_bw_info->num_active_tts += 1;
+		rh_bw_info->bw_table.bw_used += TT_HS_OVERHEAD;
+	} else if (old_active_eps != 0 &&
+				virt_dev->tt_info->active_eps == 0) {
+		rh_bw_info->num_active_tts -= 1;
+		rh_bw_info->bw_table.bw_used -= TT_HS_OVERHEAD;
+	}
+}
+
+static int xhci_reserve_bandwidth(struct xhci_hcd *xhci,
+		struct xhci_virt_device *virt_dev,
+		struct xhci_container_ctx *in_ctx)
+{
+	struct xhci_bw_info ep_bw_info[31];
+	int i;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	int old_active_eps = 0;
+
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
+	ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < 31; i++) {
+		if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+			continue;
+
+		/* Make a copy of the BW info in case we need to revert this */
+		memcpy(&ep_bw_info[i], &virt_dev->eps[i].bw_info,
+				sizeof(ep_bw_info[i]));
+		/* Drop the endpoint from the interval table if the endpoint is
+		 * being dropped or changed.
+		 */
+		if (EP_IS_DROPPED(ctrl_ctx, i))
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+	/* Overwrite the information stored in the endpoints' bw_info */
+	xhci_update_bw_info(xhci, virt_dev->in_ctx, ctrl_ctx, virt_dev);
+	for (i = 0; i < 31; i++) {
+		/* Add any changed or added endpoints to the interval table */
+		if (EP_IS_ADDED(ctrl_ctx, i))
+			xhci_add_ep_to_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+
+	if (!xhci_check_bw_table(xhci, virt_dev, old_active_eps)) {
+		/* Ok, this fits in the bandwidth we have.
+		 * Update the number of active TTs.
+		 */
+		xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+		return 0;
+	}
+
+	/* We don't have enough bandwidth for this, revert the stored info. */
+	for (i = 0; i < 31; i++) {
+		if (!EP_IS_ADDED(ctrl_ctx, i) && !EP_IS_DROPPED(ctrl_ctx, i))
+			continue;
+
+		/* Drop the new copies of any added or changed endpoints from
+		 * the interval table.
+		 */
+		if (EP_IS_ADDED(ctrl_ctx, i)) {
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+		}
+		/* Revert the endpoint back to its old information */
+		memcpy(&virt_dev->eps[i].bw_info, &ep_bw_info[i],
+				sizeof(ep_bw_info[i]));
+		/* Add any changed or dropped endpoints back into the table */
+		if (EP_IS_DROPPED(ctrl_ctx, i))
+			xhci_add_ep_to_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					virt_dev->udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+	}
+	return -ENOMEM;
+}
+
+
+/* Issue a configure endpoint command or evaluate context command
+ * and wait for it to finish.
+ */
+static int xhci_configure_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct xhci_command *command,
+		bool ctx_change, bool must_succeed)
+{
+	int ret;
+	unsigned long flags;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_virt_device *virt_dev;
+	struct xhci_slot_ctx *slot_ctx;
+
+	if (!command)
+		return -EINVAL;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (xhci->xhc_state & XHCI_STATE_DYING) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+			xhci_reserve_host_resources(xhci, ctrl_ctx)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "Not enough host resources, "
+				"active endpoint contexts = %u\n",
+				xhci->num_active_eps);
+		return -ENOMEM;
+	}
+	if ((xhci->quirks & XHCI_SW_BW_CHECKING) &&
+	    xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) {
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+			xhci_free_host_resources(xhci, ctrl_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "Not enough bandwidth\n");
+		return -ENOMEM;
+	}
+
+	slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+
+	trace_xhci_configure_endpoint_ctrl_ctx(ctrl_ctx);
+	trace_xhci_configure_endpoint(slot_ctx);
+
+	if (!ctx_change)
+		ret = xhci_queue_configure_endpoint(xhci, command,
+				command->in_ctx->dma,
+				udev->slot_id, must_succeed);
+	else
+		ret = xhci_queue_evaluate_context(xhci, command,
+				command->in_ctx->dma,
+				udev->slot_id, must_succeed);
+	if (ret < 0) {
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+			xhci_free_host_resources(xhci, ctrl_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg_trace(xhci,  trace_xhci_dbg_context_change,
+				"FIXME allocate a new ring segment");
+		return -ENOMEM;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the configure endpoint command to complete */
+	wait_for_completion(command->completion);
+
+	if (!ctx_change)
+		ret = xhci_configure_endpoint_result(xhci, udev,
+						     &command->status);
+	else
+		ret = xhci_evaluate_context_result(xhci, udev,
+						   &command->status);
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* If the command failed, remove the reserved resources.
+		 * Otherwise, clean up the estimate to include dropped eps.
+		 */
+		if (ret)
+			xhci_free_host_resources(xhci, ctrl_ctx);
+		else
+			xhci_finish_resource_reservation(xhci, ctrl_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	return ret;
+}
+
+static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci,
+	struct xhci_virt_device *vdev, int i)
+{
+	struct xhci_virt_ep *ep = &vdev->eps[i];
+
+	if (ep->ep_state & EP_HAS_STREAMS) {
+		xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on set_interface, freeing streams.\n",
+				xhci_get_endpoint_address(i));
+		xhci_free_stream_info(xhci, ep->stream_info);
+		ep->stream_info = NULL;
+		ep->ep_state &= ~EP_HAS_STREAMS;
+	}
+}
+
+/* Called after one or more calls to xhci_add_endpoint() or
+ * xhci_drop_endpoint().  If this call fails, the USB core is expected
+ * to call xhci_reset_bandwidth().
+ *
+ * Since we are in the middle of changing either configuration or
+ * installing a new alt setting, the USB core won't allow URBs to be
+ * enqueued for any endpoint on the old config or interface.  Nothing
+ * else should be touching the xhci->devs[slot_id] structure, so we
+ * don't need to take the xhci->lock for manipulating that.
+ */
+int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	int i;
+	int ret = 0;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device	*virt_dev;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_command *command;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_REMOVING))
+		return -ENODEV;
+
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	virt_dev = xhci->devs[udev->slot_id];
+
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	command->in_ctx = virt_dev->in_ctx;
+
+	/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		ret = -ENOMEM;
+		goto command_cleanup;
+	}
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
+	ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
+
+	/* Don't issue the command if there's no endpoints to update. */
+	if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
+	    ctrl_ctx->drop_flags == 0) {
+		ret = 0;
+		goto command_cleanup;
+	}
+	/* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	for (i = 31; i >= 1; i--) {
+		__le32 le32 = cpu_to_le32(BIT(i));
+
+		if ((virt_dev->eps[i-1].ring && !(ctrl_ctx->drop_flags & le32))
+		    || (ctrl_ctx->add_flags & le32) || i == 1) {
+			slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
+			slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i));
+			break;
+		}
+	}
+
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			false, false);
+	if (ret)
+		/* Callee should call reset_bandwidth() */
+		goto command_cleanup;
+
+	/* Free any rings that were dropped, but not changed. */
+	for (i = 1; i < 31; i++) {
+		if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
+		    !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) {
+			xhci_free_endpoint_ring(xhci, virt_dev, i);
+			xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
+		}
+	}
+	xhci_zero_in_ctx(xhci, virt_dev);
+	/*
+	 * Install any rings for completely new endpoints or changed endpoints,
+	 * and free any old rings from changed endpoints.
+	 */
+	for (i = 1; i < 31; i++) {
+		if (!virt_dev->eps[i].new_ring)
+			continue;
+		/* Only free the old ring if it exists.
+		 * It may not if this is the first add of an endpoint.
+		 */
+		if (virt_dev->eps[i].ring) {
+			xhci_free_endpoint_ring(xhci, virt_dev, i);
+		}
+		xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
+		virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
+		virt_dev->eps[i].new_ring = NULL;
+		xhci_debugfs_create_endpoint(xhci, virt_dev, i);
+	}
+command_cleanup:
+	kfree(command->completion);
+	kfree(command);
+
+	return ret;
+}
+
+void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device	*virt_dev;
+	int i, ret;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+	if (ret <= 0)
+		return;
+	xhci = hcd_to_xhci(hcd);
+
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	virt_dev = xhci->devs[udev->slot_id];
+	/* Free any rings allocated for added endpoints */
+	for (i = 0; i < 31; i++) {
+		if (virt_dev->eps[i].new_ring) {
+			xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
+			xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
+			virt_dev->eps[i].new_ring = NULL;
+		}
+	}
+	xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+static void xhci_setup_input_ctx_for_config_ep(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx,
+		struct xhci_container_ctx *out_ctx,
+		struct xhci_input_control_ctx *ctrl_ctx,
+		u32 add_flags, u32 drop_flags)
+{
+	ctrl_ctx->add_flags = cpu_to_le32(add_flags);
+	ctrl_ctx->drop_flags = cpu_to_le32(drop_flags);
+	xhci_slot_copy(xhci, in_ctx, out_ctx);
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+}
+
+static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_dequeue_state *deq_state)
+{
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_container_ctx *in_ctx;
+	struct xhci_ep_ctx *ep_ctx;
+	u32 added_ctxs;
+	dma_addr_t addr;
+
+	in_ctx = xhci->devs[slot_id]->in_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return;
+	}
+
+	xhci_endpoint_copy(xhci, xhci->devs[slot_id]->in_ctx,
+			xhci->devs[slot_id]->out_ctx, ep_index);
+	ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+	addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
+			deq_state->new_deq_ptr);
+	if (addr == 0) {
+		xhci_warn(xhci, "WARN Cannot submit config ep after "
+				"reset ep command\n");
+		xhci_warn(xhci, "WARN deq seg = %p, deq ptr = %p\n",
+				deq_state->new_deq_seg,
+				deq_state->new_deq_ptr);
+		return;
+	}
+	ep_ctx->deq = cpu_to_le64(addr | deq_state->new_cycle_state);
+
+	added_ctxs = xhci_get_endpoint_flag_from_index(ep_index);
+	xhci_setup_input_ctx_for_config_ep(xhci, xhci->devs[slot_id]->in_ctx,
+			xhci->devs[slot_id]->out_ctx, ctrl_ctx,
+			added_ctxs, added_ctxs);
+}
+
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int slot_id,
+			       unsigned int ep_index, unsigned int stream_id,
+			       struct xhci_td *td)
+{
+	struct xhci_dequeue_state deq_state;
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+			"Cleaning up stalled endpoint ring");
+	/* We need to move the HW's dequeue pointer past this TD,
+	 * or it will attempt to resend it on the next doorbell ring.
+	 */
+	xhci_find_new_dequeue_state(xhci, slot_id, ep_index, stream_id, td,
+				    &deq_state);
+
+	if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
+		return;
+
+	/* HW with the reset endpoint quirk will use the saved dequeue state to
+	 * issue a configure endpoint command later.
+	 */
+	if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
+				"Queueing new dequeue state");
+		xhci_queue_new_dequeue_state(xhci, slot_id,
+				ep_index, &deq_state);
+	} else {
+		/* Better hope no one uses the input context between now and the
+		 * reset endpoint completion!
+		 * XXX: No idea how this hardware will react when stream rings
+		 * are enabled.
+		 */
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Setting up input context for "
+				"configure endpoint command");
+		xhci_setup_input_ctx_for_quirk(xhci, slot_id,
+				ep_index, &deq_state);
+	}
+}
+
+static void xhci_endpoint_disable(struct usb_hcd *hcd,
+				  struct usb_host_endpoint *host_ep)
+{
+	struct xhci_hcd		*xhci;
+	struct xhci_virt_device	*vdev;
+	struct xhci_virt_ep	*ep;
+	struct usb_device	*udev;
+	unsigned long		flags;
+	unsigned int		ep_index;
+
+	xhci = hcd_to_xhci(hcd);
+rescan:
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	udev = (struct usb_device *)host_ep->hcpriv;
+	if (!udev || !udev->slot_id)
+		goto done;
+
+	vdev = xhci->devs[udev->slot_id];
+	if (!vdev)
+		goto done;
+
+	ep_index = xhci_get_endpoint_index(&host_ep->desc);
+	ep = &vdev->eps[ep_index];
+	if (!ep)
+		goto done;
+
+	/* wait for hub_tt_work to finish clearing hub TT */
+	if (ep->ep_state & EP_CLEARING_TT) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		schedule_timeout_uninterruptible(1);
+		goto rescan;
+	}
+
+	if (ep->ep_state)
+		xhci_dbg(xhci, "endpoint disable with ep_state 0x%x\n",
+			 ep->ep_state);
+done:
+	host_ep->hcpriv = NULL;
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+/*
+ * Called after usb core issues a clear halt control message.
+ * The host side of the halt should already be cleared by a reset endpoint
+ * command issued when the STALL event was received.
+ *
+ * The reset endpoint command may only be issued to endpoints in the halted
+ * state. For software that wishes to reset the data toggle or sequence number
+ * of an endpoint that isn't in the halted state this function will issue a
+ * configure endpoint command with the Drop and Add bits set for the target
+ * endpoint. Refer to the additional note in xhci spcification section 4.6.8.
+ */
+
+static void xhci_endpoint_reset(struct usb_hcd *hcd,
+		struct usb_host_endpoint *host_ep)
+{
+	struct xhci_hcd *xhci;
+	struct usb_device *udev;
+	struct xhci_virt_device *vdev;
+	struct xhci_virt_ep *ep;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_command *stop_cmd, *cfg_cmd;
+	unsigned int ep_index;
+	unsigned long flags;
+	u32 ep_flag;
+	int err;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!host_ep->hcpriv)
+		return;
+	udev = (struct usb_device *) host_ep->hcpriv;
+	vdev = xhci->devs[udev->slot_id];
+
+	/*
+	 * vdev may be lost due to xHC restore error and re-initialization
+	 * during S3/S4 resume. A new vdev will be allocated later by
+	 * xhci_discover_or_reset_device()
+	 */
+	if (!udev->slot_id || !vdev)
+		return;
+	ep_index = xhci_get_endpoint_index(&host_ep->desc);
+	ep = &vdev->eps[ep_index];
+	if (!ep)
+		return;
+
+	/* Bail out if toggle is already being cleared by a endpoint reset */
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) {
+		ep->ep_state &= ~EP_HARD_CLEAR_TOGGLE;
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	/* Only interrupt and bulk ep's use data toggle, USB2 spec 5.5.4-> */
+	if (usb_endpoint_xfer_control(&host_ep->desc) ||
+	    usb_endpoint_xfer_isoc(&host_ep->desc))
+		return;
+
+	ep_flag = xhci_get_endpoint_flag(&host_ep->desc);
+
+	if (ep_flag == SLOT_FLAG || ep_flag == EP0_FLAG)
+		return;
+
+	stop_cmd = xhci_alloc_command(xhci, true, GFP_NOWAIT);
+	if (!stop_cmd)
+		return;
+
+	cfg_cmd = xhci_alloc_command_with_ctx(xhci, true, GFP_NOWAIT);
+	if (!cfg_cmd)
+		goto cleanup;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* block queuing new trbs and ringing ep doorbell */
+	ep->ep_state |= EP_SOFT_CLEAR_TOGGLE;
+
+	/*
+	 * Make sure endpoint ring is empty before resetting the toggle/seq.
+	 * Driver is required to synchronously cancel all transfer request.
+	 * Stop the endpoint to force xHC to update the output context
+	 */
+
+	if (!list_empty(&ep->ring->td_list)) {
+		dev_err(&udev->dev, "EP not empty, refuse reset\n");
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		goto cleanup;
+	}
+
+	err = xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id,
+					ep_index, 0);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(stop_cmd->completion);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	/* config ep command clears toggle if add and drop ep flags are set */
+	ctrl_ctx = xhci_get_input_control_ctx(cfg_cmd->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		goto cleanup;
+	}
+
+	xhci_setup_input_ctx_for_config_ep(xhci, cfg_cmd->in_ctx, vdev->out_ctx,
+					   ctrl_ctx, ep_flag, ep_flag);
+	xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index);
+
+	err = xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
+				      udev->slot_id, false);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(cfg_cmd->completion);
+
+	xhci_free_command(xhci, cfg_cmd);
+cleanup:
+	xhci_free_command(xhci, stop_cmd);
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (ep->ep_state & EP_SOFT_CLEAR_TOGGLE)
+		ep->ep_state &= ~EP_SOFT_CLEAR_TOGGLE;
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev, struct usb_host_endpoint *ep,
+		unsigned int slot_id)
+{
+	int ret;
+	unsigned int ep_index;
+	unsigned int ep_state;
+
+	if (!ep)
+		return -EINVAL;
+	ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__);
+	if (ret <= 0)
+		return ret ? ret : -EINVAL;
+	if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) {
+		xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion"
+				" descriptor for ep 0x%x does not support streams\n",
+				ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+	if (ep_state & EP_HAS_STREAMS ||
+			ep_state & EP_GETTING_STREAMS) {
+		xhci_warn(xhci, "WARN: SuperSpeed bulk endpoint 0x%x "
+				"already has streams set up.\n",
+				ep->desc.bEndpointAddress);
+		xhci_warn(xhci, "Send email to xHCI maintainer and ask for "
+				"dynamic stream context array reallocation.\n");
+		return -EINVAL;
+	}
+	if (!list_empty(&xhci->devs[slot_id]->eps[ep_index].ring->td_list)) {
+		xhci_warn(xhci, "Cannot setup streams for SuperSpeed bulk "
+				"endpoint 0x%x; URBs are pending.\n",
+				ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void xhci_calculate_streams_entries(struct xhci_hcd *xhci,
+		unsigned int *num_streams, unsigned int *num_stream_ctxs)
+{
+	unsigned int max_streams;
+
+	/* The stream context array size must be a power of two */
+	*num_stream_ctxs = roundup_pow_of_two(*num_streams);
+	/*
+	 * Find out how many primary stream array entries the host controller
+	 * supports.  Later we may use secondary stream arrays (similar to 2nd
+	 * level page entries), but that's an optional feature for xHCI host
+	 * controllers. xHCs must support at least 4 stream IDs.
+	 */
+	max_streams = HCC_MAX_PSA(xhci->hcc_params);
+	if (*num_stream_ctxs > max_streams) {
+		xhci_dbg(xhci, "xHCI HW only supports %u stream ctx entries.\n",
+				max_streams);
+		*num_stream_ctxs = max_streams;
+		*num_streams = max_streams;
+	}
+}
+
+/* Returns an error code if one of the endpoint already has streams.
+ * This does not change any data structures, it only checks and gathers
+ * information.
+ */
+static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int *num_streams, u32 *changed_ep_bitmask)
+{
+	unsigned int max_streams;
+	unsigned int endpoint_flag;
+	int i;
+	int ret;
+
+	for (i = 0; i < num_eps; i++) {
+		ret = xhci_check_streams_endpoint(xhci, udev,
+				eps[i], udev->slot_id);
+		if (ret < 0)
+			return ret;
+
+		max_streams = usb_ss_max_streams(&eps[i]->ss_ep_comp);
+		if (max_streams < (*num_streams - 1)) {
+			xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
+					eps[i]->desc.bEndpointAddress,
+					max_streams);
+			*num_streams = max_streams+1;
+		}
+
+		endpoint_flag = xhci_get_endpoint_flag(&eps[i]->desc);
+		if (*changed_ep_bitmask & endpoint_flag)
+			return -EINVAL;
+		*changed_ep_bitmask |= endpoint_flag;
+	}
+	return 0;
+}
+
+static u32 xhci_calculate_no_streams_bitmask(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps)
+{
+	u32 changed_ep_bitmask = 0;
+	unsigned int slot_id;
+	unsigned int ep_index;
+	unsigned int ep_state;
+	int i;
+
+	slot_id = udev->slot_id;
+	if (!xhci->devs[slot_id])
+		return 0;
+
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+		/* Are streams already being freed for the endpoint? */
+		if (ep_state & EP_GETTING_NO_STREAMS) {
+			xhci_warn(xhci, "WARN Can't disable streams for "
+					"endpoint 0x%x, "
+					"streams are being disabled already\n",
+					eps[i]->desc.bEndpointAddress);
+			return 0;
+		}
+		/* Are there actually any streams to free? */
+		if (!(ep_state & EP_HAS_STREAMS) &&
+				!(ep_state & EP_GETTING_STREAMS)) {
+			xhci_warn(xhci, "WARN Can't disable streams for "
+					"endpoint 0x%x, "
+					"streams are already disabled!\n",
+					eps[i]->desc.bEndpointAddress);
+			xhci_warn(xhci, "WARN xhci_free_streams() called "
+					"with non-streams endpoint\n");
+			return 0;
+		}
+		changed_ep_bitmask |= xhci_get_endpoint_flag(&eps[i]->desc);
+	}
+	return changed_ep_bitmask;
+}
+
+/*
+ * The USB device drivers use this function (through the HCD interface in USB
+ * core) to prepare a set of bulk endpoints to use streams.  Streams are used to
+ * coordinate mass storage command queueing across multiple endpoints (basically
+ * a stream ID == a task ID).
+ *
+ * Setting up streams involves allocating the same size stream context array
+ * for each endpoint and issuing a configure endpoint command for all endpoints.
+ *
+ * Don't allow the call to succeed if one endpoint only supports one stream
+ * (which means it doesn't support streams at all).
+ *
+ * Drivers may get less stream IDs than they asked for, if the host controller
+ * hardware or endpoints claim they can't support the number of requested
+ * stream IDs.
+ */
+static int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		unsigned int num_streams, gfp_t mem_flags)
+{
+	int i, ret;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device *vdev;
+	struct xhci_command *config_cmd;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	unsigned int ep_index;
+	unsigned int num_stream_ctxs;
+	unsigned int max_packet;
+	unsigned long flags;
+	u32 changed_ep_bitmask = 0;
+
+	if (!eps)
+		return -EINVAL;
+
+	/* Add one to the number of streams requested to account for
+	 * stream 0 that is reserved for xHCI usage.
+	 */
+	num_streams += 1;
+	xhci = hcd_to_xhci(hcd);
+	xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n",
+			num_streams);
+
+	/* MaxPSASize value 0 (2 streams) means streams are not supported */
+	if ((xhci->quirks & XHCI_BROKEN_STREAMS) ||
+			HCC_MAX_PSA(xhci->hcc_params) < 4) {
+		xhci_dbg(xhci, "xHCI controller does not support streams.\n");
+		return -ENOSYS;
+	}
+
+	config_cmd = xhci_alloc_command_with_ctx(xhci, true, mem_flags);
+	if (!config_cmd)
+		return -ENOMEM;
+
+	ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		xhci_free_command(xhci, config_cmd);
+		return -ENOMEM;
+	}
+
+	/* Check to make sure all endpoints are not already configured for
+	 * streams.  While we're at it, find the maximum number of streams that
+	 * all the endpoints will support and check for duplicate endpoints.
+	 */
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_calculate_streams_and_bitmask(xhci, udev, eps,
+			num_eps, &num_streams, &changed_ep_bitmask);
+	if (ret < 0) {
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return ret;
+	}
+	if (num_streams <= 1) {
+		xhci_warn(xhci, "WARN: endpoints can't handle "
+				"more than one stream.\n");
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -EINVAL;
+	}
+	vdev = xhci->devs[udev->slot_id];
+	/* Mark each endpoint as being in transition, so
+	 * xhci_urb_enqueue() will reject all URBs.
+	 */
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		vdev->eps[ep_index].ep_state |= EP_GETTING_STREAMS;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Setup internal data structures and allocate HW data structures for
+	 * streams (but don't install the HW structures in the input context
+	 * until we're sure all memory allocation succeeded).
+	 */
+	xhci_calculate_streams_entries(xhci, &num_streams, &num_stream_ctxs);
+	xhci_dbg(xhci, "Need %u stream ctx entries for %u stream IDs.\n",
+			num_stream_ctxs, num_streams);
+
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		max_packet = usb_endpoint_maxp(&eps[i]->desc);
+		vdev->eps[ep_index].stream_info = xhci_alloc_stream_info(xhci,
+				num_stream_ctxs,
+				num_streams,
+				max_packet, mem_flags);
+		if (!vdev->eps[ep_index].stream_info)
+			goto cleanup;
+		/* Set maxPstreams in endpoint context and update deq ptr to
+		 * point to stream context array. FIXME
+		 */
+	}
+
+	/* Set up the input context for a configure endpoint command. */
+	for (i = 0; i < num_eps; i++) {
+		struct xhci_ep_ctx *ep_ctx;
+
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_ctx = xhci_get_ep_ctx(xhci, config_cmd->in_ctx, ep_index);
+
+		xhci_endpoint_copy(xhci, config_cmd->in_ctx,
+				vdev->out_ctx, ep_index);
+		xhci_setup_streams_ep_input_ctx(xhci, ep_ctx,
+				vdev->eps[ep_index].stream_info);
+	}
+	/* Tell the HW to drop its old copy of the endpoint context info
+	 * and add the updated copy from the input context.
+	 */
+	xhci_setup_input_ctx_for_config_ep(xhci, config_cmd->in_ctx,
+			vdev->out_ctx, ctrl_ctx,
+			changed_ep_bitmask, changed_ep_bitmask);
+
+	/* Issue and wait for the configure endpoint command */
+	ret = xhci_configure_endpoint(xhci, udev, config_cmd,
+			false, false);
+
+	/* xHC rejected the configure endpoint command for some reason, so we
+	 * leave the old ring intact and free our internal streams data
+	 * structure.
+	 */
+	if (ret < 0)
+		goto cleanup;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+		xhci_dbg(xhci, "Slot %u ep ctx %u now has streams.\n",
+			 udev->slot_id, ep_index);
+		vdev->eps[ep_index].ep_state |= EP_HAS_STREAMS;
+	}
+	xhci_free_command(xhci, config_cmd);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		xhci_debugfs_create_stream_files(xhci, vdev, ep_index);
+	}
+	/* Subtract 1 for stream 0, which drivers can't use */
+	return num_streams - 1;
+
+cleanup:
+	/* If it didn't work, free the streams! */
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+		vdev->eps[ep_index].stream_info = NULL;
+		/* FIXME Unset maxPstreams in endpoint context and
+		 * update deq ptr to point to normal string ring.
+		 */
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_STREAMS;
+		vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+		xhci_endpoint_zero(xhci, vdev, eps[i]);
+	}
+	xhci_free_command(xhci, config_cmd);
+	return -ENOMEM;
+}
+
+/* Transition the endpoint from using streams to being a "normal" endpoint
+ * without streams.
+ *
+ * Modify the endpoint context state, submit a configure endpoint command,
+ * and free all endpoint rings for streams if that completes successfully.
+ */
+static int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+		struct usb_host_endpoint **eps, unsigned int num_eps,
+		gfp_t mem_flags)
+{
+	int i, ret;
+	struct xhci_hcd *xhci;
+	struct xhci_virt_device *vdev;
+	struct xhci_command *command;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	unsigned int ep_index;
+	unsigned long flags;
+	u32 changed_ep_bitmask;
+
+	xhci = hcd_to_xhci(hcd);
+	vdev = xhci->devs[udev->slot_id];
+
+	/* Set up a configure endpoint command to remove the streams rings */
+	spin_lock_irqsave(&xhci->lock, flags);
+	changed_ep_bitmask = xhci_calculate_no_streams_bitmask(xhci,
+			udev, eps, num_eps);
+	if (changed_ep_bitmask == 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Use the xhci_command structure from the first endpoint.  We may have
+	 * allocated too many, but the driver may call xhci_free_streams() for
+	 * each endpoint it grouped into one call to xhci_alloc_streams().
+	 */
+	ep_index = xhci_get_endpoint_index(&eps[0]->desc);
+	command = vdev->eps[ep_index].stream_info->free_streams_command;
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < num_eps; i++) {
+		struct xhci_ep_ctx *ep_ctx;
+
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		ep_ctx = xhci_get_ep_ctx(xhci, command->in_ctx, ep_index);
+		xhci->devs[udev->slot_id]->eps[ep_index].ep_state |=
+			EP_GETTING_NO_STREAMS;
+
+		xhci_endpoint_copy(xhci, command->in_ctx,
+				vdev->out_ctx, ep_index);
+		xhci_setup_no_streams_ep_input_ctx(ep_ctx,
+				&vdev->eps[ep_index]);
+	}
+	xhci_setup_input_ctx_for_config_ep(xhci, command->in_ctx,
+			vdev->out_ctx, ctrl_ctx,
+			changed_ep_bitmask, changed_ep_bitmask);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Issue and wait for the configure endpoint command,
+	 * which must succeed.
+	 */
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			false, true);
+
+	/* xHC rejected the configure endpoint command for some reason, so we
+	 * leave the streams rings intact.
+	 */
+	if (ret < 0)
+		return ret;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	for (i = 0; i < num_eps; i++) {
+		ep_index = xhci_get_endpoint_index(&eps[i]->desc);
+		xhci_free_stream_info(xhci, vdev->eps[ep_index].stream_info);
+		vdev->eps[ep_index].stream_info = NULL;
+		/* FIXME Unset maxPstreams in endpoint context and
+		 * update deq ptr to point to normal string ring.
+		 */
+		vdev->eps[ep_index].ep_state &= ~EP_GETTING_NO_STREAMS;
+		vdev->eps[ep_index].ep_state &= ~EP_HAS_STREAMS;
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Deletes endpoint resources for endpoints that were active before a Reset
+ * Device command, or a Disable Slot command.  The Reset Device command leaves
+ * the control endpoint intact, whereas the Disable Slot command deletes it.
+ *
+ * Must be called with xhci->lock held.
+ */
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+	struct xhci_virt_device *virt_dev, bool drop_control_ep)
+{
+	int i;
+	unsigned int num_dropped_eps = 0;
+	unsigned int drop_flags = 0;
+
+	for (i = (drop_control_ep ? 0 : 1); i < 31; i++) {
+		if (virt_dev->eps[i].ring) {
+			drop_flags |= 1 << i;
+			num_dropped_eps++;
+		}
+	}
+	xhci->num_active_eps -= num_dropped_eps;
+	if (num_dropped_eps)
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Dropped %u ep ctxs, flags = 0x%x, "
+				"%u now active.",
+				num_dropped_eps, drop_flags,
+				xhci->num_active_eps);
+}
+
+/*
+ * This submits a Reset Device Command, which will set the device state to 0,
+ * set the device address to 0, and disable all the endpoints except the default
+ * control endpoint.  The USB core should come back and call
+ * xhci_address_device(), and then re-set up the configuration.  If this is
+ * called because of a usb_reset_and_verify_device(), then the old alternate
+ * settings will be re-installed through the normal bandwidth allocation
+ * functions.
+ *
+ * Wait for the Reset Device command to finish.  Remove all structures
+ * associated with the endpoints that were disabled.  Clear the input device
+ * structure? Reset the control endpoint 0 max packet size?
+ *
+ * If the virt_dev to be reset does not exist or does not match the udev,
+ * it means the device is lost, possibly due to the xHC restore error and
+ * re-initialization during S3/S4. In this case, call xhci_alloc_dev() to
+ * re-allocate the device.
+ */
+static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
+		struct usb_device *udev)
+{
+	int ret, i;
+	unsigned long flags;
+	struct xhci_hcd *xhci;
+	unsigned int slot_id;
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *reset_device_cmd;
+	struct xhci_slot_ctx *slot_ctx;
+	int old_active_eps = 0;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	slot_id = udev->slot_id;
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev) {
+		xhci_dbg(xhci, "The device to be reset with slot ID %u does "
+				"not exist. Re-allocate the device\n", slot_id);
+		ret = xhci_alloc_dev(hcd, udev);
+		if (ret == 1)
+			return 0;
+		else
+			return -EINVAL;
+	}
+
+	if (virt_dev->tt_info)
+		old_active_eps = virt_dev->tt_info->active_eps;
+
+	if (virt_dev->udev != udev) {
+		/* If the virt_dev and the udev does not match, this virt_dev
+		 * may belong to another udev.
+		 * Re-allocate the device.
+		 */
+		xhci_dbg(xhci, "The device to be reset with slot ID %u does "
+				"not match the udev. Re-allocate the device\n",
+				slot_id);
+		ret = xhci_alloc_dev(hcd, udev);
+		if (ret == 1)
+			return 0;
+		else
+			return -EINVAL;
+	}
+
+	/* If device is not setup, there is no point in resetting it */
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+						SLOT_STATE_DISABLED)
+		return 0;
+
+	trace_xhci_discover_or_reset_device(slot_ctx);
+
+	xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
+	/* Allocate the command structure that holds the struct completion.
+	 * Assume we're in process context, since the normal device reset
+	 * process has to wait for the device anyway.  Storage devices are
+	 * reset as part of error handling, so use GFP_NOIO instead of
+	 * GFP_KERNEL.
+	 */
+	reset_device_cmd = xhci_alloc_command(xhci, true, GFP_NOIO);
+	if (!reset_device_cmd) {
+		xhci_dbg(xhci, "Couldn't allocate command structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Attempt to submit the Reset Device command to the command ring */
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	ret = xhci_queue_reset_device(xhci, reset_device_cmd, slot_id);
+	if (ret) {
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto command_cleanup;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the Reset Device command to finish */
+	wait_for_completion(reset_device_cmd->completion);
+
+	/* The Reset Device command can't fail, according to the 0.95/0.96 spec,
+	 * unless we tried to reset a slot ID that wasn't enabled,
+	 * or the device wasn't in the addressed or configured state.
+	 */
+	ret = reset_device_cmd->status;
+	switch (ret) {
+	case COMP_COMMAND_ABORTED:
+	case COMP_COMMAND_RING_STOPPED:
+		xhci_warn(xhci, "Timeout waiting for reset device command\n");
+		ret = -ETIME;
+		goto command_cleanup;
+	case COMP_SLOT_NOT_ENABLED_ERROR: /* 0.95 completion for bad slot ID */
+	case COMP_CONTEXT_STATE_ERROR: /* 0.96 completion code for same thing */
+		xhci_dbg(xhci, "Can't reset device (slot ID %u) in %s state\n",
+				slot_id,
+				xhci_get_slot_state(xhci, virt_dev->out_ctx));
+		xhci_dbg(xhci, "Not freeing device rings.\n");
+		/* Don't treat this as an error.  May change my mind later. */
+		ret = 0;
+		goto command_cleanup;
+	case COMP_SUCCESS:
+		xhci_dbg(xhci, "Successful reset device command.\n");
+		break;
+	default:
+		if (xhci_is_vendor_info_code(xhci, ret))
+			break;
+		xhci_warn(xhci, "Unknown completion code %u for "
+				"reset device command.\n", ret);
+		ret = -EINVAL;
+		goto command_cleanup;
+	}
+
+	/* Free up host controller endpoint resources */
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* Don't delete the default control endpoint resources */
+		xhci_free_device_endpoint_resources(xhci, virt_dev, false);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+
+	/* Everything but endpoint 0 is disabled, so free the rings. */
+	for (i = 1; i < 31; i++) {
+		struct xhci_virt_ep *ep = &virt_dev->eps[i];
+
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on device reset, freeing streams.\n",
+					xhci_get_endpoint_address(i));
+			xhci_free_stream_info(xhci, ep->stream_info);
+			ep->stream_info = NULL;
+			ep->ep_state &= ~EP_HAS_STREAMS;
+		}
+
+		if (ep->ring) {
+			xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
+			xhci_free_endpoint_ring(xhci, virt_dev, i);
+		}
+		if (!list_empty(&virt_dev->eps[i].bw_endpoint_list))
+			xhci_drop_ep_from_interval_table(xhci,
+					&virt_dev->eps[i].bw_info,
+					virt_dev->bw_table,
+					udev,
+					&virt_dev->eps[i],
+					virt_dev->tt_info);
+		xhci_clear_endpoint_bw_info(&virt_dev->eps[i].bw_info);
+	}
+	/* If necessary, update the number of active TTs on this root port */
+	xhci_update_tt_active_eps(xhci, virt_dev, old_active_eps);
+	virt_dev->flags = 0;
+	ret = 0;
+
+command_cleanup:
+	xhci_free_command(xhci, reset_device_cmd);
+	return ret;
+}
+
+/*
+ * At this point, the struct usb_device is about to go away, the device has
+ * disconnected, and all traffic has been stopped and the endpoints have been
+ * disabled.  Free any HC data structures associated with that device.
+ */
+static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_virt_device *virt_dev;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	int i, ret;
+
+	/*
+	 * We called pm_runtime_get_noresume when the device was attached.
+	 * Decrement the counter here to allow controller to runtime suspend
+	 * if no devices remain.
+	 */
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		pm_runtime_put_noidle(hcd->self.controller);
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, true, __func__);
+	/* If the host is halted due to driver unload, we still need to free the
+	 * device.
+	 */
+	if (ret <= 0 && ret != -ENODEV)
+		return;
+
+	virt_dev = xhci->devs[udev->slot_id];
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	trace_xhci_free_dev(slot_ctx);
+
+	/* Stop any wayward timer functions (which may grab the lock) */
+	for (i = 0; i < 31; i++) {
+		virt_dev->eps[i].ep_state &= ~EP_STOP_CMD_PENDING;
+		del_timer_sync(&virt_dev->eps[i].stop_cmd_timer);
+	}
+	virt_dev->udev = NULL;
+	xhci_disable_slot(xhci, udev->slot_id);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	xhci_free_virt_device(xhci, udev->slot_id);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+}
+
+int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
+{
+	struct xhci_command *command;
+	unsigned long flags;
+	u32 state;
+	int ret = 0;
+
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+	if (!command)
+		return -ENOMEM;
+
+	xhci_debugfs_remove_slot(xhci, slot_id);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	/* Don't disable the slot if the host controller is dead. */
+	state = readl(&xhci->op_regs->status);
+	if (state == 0xffffffff || (xhci->xhc_state & XHCI_STATE_DYING) ||
+			(xhci->xhc_state & XHCI_STATE_HALTED)) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		kfree(command);
+		return -ENODEV;
+	}
+
+	ret = xhci_queue_slot_control(xhci, command, TRB_DISABLE_SLOT,
+				slot_id);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		kfree(command);
+		return ret;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(command->completion);
+
+	if (command->status != COMP_SUCCESS)
+		xhci_warn(xhci, "Unsuccessful disable slot %u command, status %d\n",
+			  slot_id, command->status);
+
+	xhci_free_command(xhci, command);
+
+	return ret;
+}
+
+/*
+ * Checks if we have enough host controller resources for the default control
+ * endpoint.
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci)
+{
+	if (xhci->num_active_eps + 1 > xhci->limit_active_eps) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+				"Not enough ep ctxs: "
+				"%u active, need to add 1, limit is %u.",
+				xhci->num_active_eps, xhci->limit_active_eps);
+		return -ENOMEM;
+	}
+	xhci->num_active_eps += 1;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
+			"Adding 1 ep ctx, %u now active.",
+			xhci->num_active_eps);
+	return 0;
+}
+
+
+/*
+ * Returns 0 if the xHC ran out of device slots, the Enable Slot command
+ * timed out, or allocating memory failed.  Returns 1 on success.
+ */
+int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_virt_device *vdev;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	int ret, slot_id;
+	struct xhci_command *command;
+
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+	if (!command)
+		return 0;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		xhci_free_command(xhci, command);
+		return 0;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	wait_for_completion(command->completion);
+	slot_id = command->slot_id;
+
+	if (!slot_id || command->status != COMP_SUCCESS) {
+		xhci_err(xhci, "Error while assigning device slot ID\n");
+		xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n",
+				HCS_MAX_SLOTS(
+					readl(&xhci->cap_regs->hcs_params1)));
+		xhci_free_command(xhci, command);
+		return 0;
+	}
+
+	xhci_free_command(xhci, command);
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		ret = xhci_reserve_host_control_ep_resources(xhci);
+		if (ret) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_warn(xhci, "Not enough host resources, "
+					"active endpoint contexts = %u\n",
+					xhci->num_active_eps);
+			goto disable_slot;
+		}
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	/* Use GFP_NOIO, since this function can be called from
+	 * xhci_discover_or_reset_device(), which may be called as part of
+	 * mass storage driver error handling.
+	 */
+	if (!xhci_alloc_virt_device(xhci, slot_id, udev, GFP_NOIO)) {
+		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
+		goto disable_slot;
+	}
+	vdev = xhci->devs[slot_id];
+	slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
+	trace_xhci_alloc_dev(slot_ctx);
+
+	udev->slot_id = slot_id;
+
+	xhci_debugfs_create_slot(xhci, slot_id);
+
+	/*
+	 * If resetting upon resume, we can't put the controller into runtime
+	 * suspend if there is a device attached.
+	 */
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		pm_runtime_get_noresume(hcd->self.controller);
+
+	/* Is this a LS or FS device under a HS hub? */
+	/* Hub or peripherial? */
+	return 1;
+
+disable_slot:
+	xhci_disable_slot(xhci, udev->slot_id);
+	xhci_free_virt_device(xhci, udev->slot_id);
+
+	return 0;
+}
+
+/*
+ * Issue an Address Device command and optionally send a corresponding
+ * SetAddress request to the device.
+ */
+static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
+			     enum xhci_setup_dev setup)
+{
+	const char *act = setup == SETUP_CONTEXT_ONLY ? "context" : "address";
+	unsigned long flags;
+	struct xhci_virt_device *virt_dev;
+	int ret = 0;
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	u64 temp_64;
+	struct xhci_command *command = NULL;
+
+	mutex_lock(&xhci->mutex);
+
+	if (xhci->xhc_state) {	/* dying, removing or halted */
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	if (!udev->slot_id) {
+		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+				"Bad Slot ID %d", udev->slot_id);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	if (WARN_ON(!virt_dev)) {
+		/*
+		 * In plug/unplug torture test with an NEC controller,
+		 * a zero-dereference was observed once due to virt_dev = 0.
+		 * Print useful debug rather than crash if it is observed again!
+		 */
+		xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
+			udev->slot_id);
+		ret = -EINVAL;
+		goto out;
+	}
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	trace_xhci_setup_device_slot(slot_ctx);
+
+	if (setup == SETUP_CONTEXT_ONLY) {
+		if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+		    SLOT_STATE_DEFAULT) {
+			xhci_dbg(xhci, "Slot already in default state\n");
+			goto out;
+		}
+	}
+
+	command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+	if (!command) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	command->in_ctx = virt_dev->in_ctx;
+
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		ret = -EINVAL;
+		goto out;
+	}
+	/*
+	 * If this is the first Set Address since device plug-in or
+	 * virt_device realloaction after a resume with an xHCI power loss,
+	 * then set up the slot context.
+	 */
+	if (!slot_ctx->dev_info)
+		xhci_setup_addressable_virt_dev(xhci, udev);
+	/* Otherwise, update the control endpoint ring enqueue pointer. */
+	else
+		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
+	trace_xhci_address_ctx(xhci, virt_dev->in_ctx,
+				le32_to_cpu(slot_ctx->dev_info) >> 27);
+
+	trace_xhci_address_ctrl_ctx(ctrl_ctx);
+	spin_lock_irqsave(&xhci->lock, flags);
+	trace_xhci_setup_device(virt_dev);
+	ret = xhci_queue_address_device(xhci, command, virt_dev->in_ctx->dma,
+					udev->slot_id, setup);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+				"FIXME: allocate a command ring segment");
+		goto out;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
+	wait_for_completion(command->completion);
+
+	/* FIXME: From section 4.3.4: "Software shall be responsible for timing
+	 * the SetAddress() "recovery interval" required by USB and aborting the
+	 * command on a timeout.
+	 */
+	switch (command->status) {
+	case COMP_COMMAND_ABORTED:
+	case COMP_COMMAND_RING_STOPPED:
+		xhci_warn(xhci, "Timeout while waiting for setup device command\n");
+		ret = -ETIME;
+		break;
+	case COMP_CONTEXT_STATE_ERROR:
+	case COMP_SLOT_NOT_ENABLED_ERROR:
+		xhci_err(xhci, "Setup ERROR: setup %s command for slot %d.\n",
+			 act, udev->slot_id);
+		ret = -EINVAL;
+		break;
+	case COMP_USB_TRANSACTION_ERROR:
+		dev_warn(&udev->dev, "Device not responding to setup %s.\n", act);
+
+		mutex_unlock(&xhci->mutex);
+		ret = xhci_disable_slot(xhci, udev->slot_id);
+		xhci_free_virt_device(xhci, udev->slot_id);
+		if (!ret)
+			xhci_alloc_dev(hcd, udev);
+		kfree(command->completion);
+		kfree(command);
+		return -EPROTO;
+	case COMP_INCOMPATIBLE_DEVICE_ERROR:
+		dev_warn(&udev->dev,
+			 "ERROR: Incompatible device for setup %s command\n", act);
+		ret = -ENODEV;
+		break;
+	case COMP_SUCCESS:
+		xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+			       "Successful setup %s command", act);
+		break;
+	default:
+		xhci_err(xhci,
+			 "ERROR: unexpected setup %s command completion code 0x%x.\n",
+			 act, command->status);
+		trace_xhci_address_ctx(xhci, virt_dev->out_ctx, 1);
+		ret = -EINVAL;
+		break;
+	}
+	if (ret)
+		goto out;
+	temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+			"Op regs DCBAA ptr = %#016llx", temp_64);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+		"Slot ID %d dcbaa entry @%p = %#016llx",
+		udev->slot_id,
+		&xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+		(unsigned long long)
+		le64_to_cpu(xhci->dcbaa->dev_context_ptrs[udev->slot_id]));
+	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+			"Output Context DMA address = %#08llx",
+			(unsigned long long)virt_dev->out_ctx->dma);
+	trace_xhci_address_ctx(xhci, virt_dev->in_ctx,
+				le32_to_cpu(slot_ctx->dev_info) >> 27);
+	/*
+	 * USB core uses address 1 for the roothubs, so we add one to the
+	 * address given back to us by the HC.
+	 */
+	trace_xhci_address_ctx(xhci, virt_dev->out_ctx,
+				le32_to_cpu(slot_ctx->dev_info) >> 27);
+	/* Zero the input context control for later use */
+	ctrl_ctx->add_flags = 0;
+	ctrl_ctx->drop_flags = 0;
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	udev->devaddr = (u8)(le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_address,
+		       "Internal device address = %d",
+		       le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+out:
+	mutex_unlock(&xhci->mutex);
+	if (command) {
+		kfree(command->completion);
+		kfree(command);
+	}
+	return ret;
+}
+
+static int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ADDRESS);
+}
+
+static int xhci_enable_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return xhci_setup_device(hcd, udev, SETUP_CONTEXT_ONLY);
+}
+
+/*
+ * Transfer the port index into real index in the HW port status
+ * registers. Caculate offset between the port's PORTSC register
+ * and port status base. Divide the number of per port register
+ * to get the real index. The raw port number bases 1.
+ */
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+	struct xhci_hub *rhub;
+
+	rhub = xhci_get_rhub(hcd);
+	return rhub->ports[port1 - 1]->hw_portnum + 1;
+}
+
+/*
+ * Issue an Evaluate Context command to change the Maximum Exit Latency in the
+ * slot context.  If that succeeds, store the new MEL in the xhci_virt_device.
+ */
+static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
+			struct usb_device *udev, u16 max_exit_latency)
+{
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *command;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/*
+	 * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+	 * xHC was re-initialized. Exit latency will be set later after
+	 * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+	 */
+
+	if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return 0;
+	}
+
+	/* Attempt to issue an Evaluate Context command to change the MEL. */
+	command = xhci->lpm_command;
+	ctrl_ctx = xhci_get_input_control_ctx(command->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx);
+	slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT));
+	slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency);
+	slot_ctx->dev_state = 0;
+
+	xhci_dbg_trace(xhci, trace_xhci_dbg_context_change,
+			"Set up evaluate context for LPM MEL change.");
+
+	/* Issue and wait for the evaluate context command. */
+	ret = xhci_configure_endpoint(xhci, udev, command,
+			true, true);
+
+	if (!ret) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		virt_dev->current_mel = max_exit_latency;
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	return ret;
+}
+
+#ifdef CONFIG_PM
+
+/* BESL to HIRD Encoding array for USB2 LPM */
+static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
+	3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000};
+
+/* Calculate HIRD/BESL for USB2 PORTPMSC*/
+static int xhci_calculate_hird_besl(struct xhci_hcd *xhci,
+					struct usb_device *udev)
+{
+	int u2del, besl, besl_host;
+	int besl_device = 0;
+	u32 field;
+
+	u2del = HCS_U2_LATENCY(xhci->hcs_params3);
+	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+
+	if (field & USB_BESL_SUPPORT) {
+		for (besl_host = 0; besl_host < 16; besl_host++) {
+			if (xhci_besl_encoding[besl_host] >= u2del)
+				break;
+		}
+		/* Use baseline BESL value as default */
+		if (field & USB_BESL_BASELINE_VALID)
+			besl_device = USB_GET_BESL_BASELINE(field);
+		else if (field & USB_BESL_DEEP_VALID)
+			besl_device = USB_GET_BESL_DEEP(field);
+	} else {
+		if (u2del <= 50)
+			besl_host = 0;
+		else
+			besl_host = (u2del - 51) / 75 + 1;
+	}
+
+	besl = besl_host + besl_device;
+	if (besl > 15)
+		besl = 15;
+
+	return besl;
+}
+
+/* Calculate BESLD, L1 timeout and HIRDM for USB2 PORTHLPMC */
+static int xhci_calculate_usb2_hw_lpm_params(struct usb_device *udev)
+{
+	u32 field;
+	int l1;
+	int besld = 0;
+	int hirdm = 0;
+
+	field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+
+	/* xHCI l1 is set in steps of 256us, xHCI 1.0 section 5.4.11.2 */
+	l1 = udev->l1_params.timeout / 256;
+
+	/* device has preferred BESLD */
+	if (field & USB_BESL_DEEP_VALID) {
+		besld = USB_GET_BESL_DEEP(field);
+		hirdm = 1;
+	}
+
+	return PORT_BESLD(besld) | PORT_L1_TIMEOUT(l1) | PORT_HIRDM(hirdm);
+}
+
+static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+			struct usb_device *udev, int enable)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct xhci_port **ports;
+	__le32 __iomem	*pm_addr, *hlpm_addr;
+	u32		pm_val, hlpm_val, field;
+	unsigned int	port_num;
+	unsigned long	flags;
+	int		hird, exit_latency;
+	int		ret;
+
+	if (xhci->quirks & XHCI_HW_LPM_DISABLE)
+		return -EPERM;
+
+	if (hcd->speed >= HCD_USB3 || !xhci->hw_lpm_support ||
+			!udev->lpm_capable)
+		return -EPERM;
+
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return -EPERM;
+
+	if (udev->usb2_hw_lpm_capable != 1)
+		return -EPERM;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	ports = xhci->usb2_rhub.ports;
+	port_num = udev->portnum - 1;
+	pm_addr = ports[port_num]->addr + PORTPMSC;
+	pm_val = readl(pm_addr);
+	hlpm_addr = ports[port_num]->addr + PORTHLPMC;
+
+	xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n",
+			enable ? "enable" : "disable", port_num + 1);
+
+	if (enable) {
+		/* Host supports BESL timeout instead of HIRD */
+		if (udev->usb2_hw_lpm_besl_capable) {
+			/* if device doesn't have a preferred BESL value use a
+			 * default one which works with mixed HIRD and BESL
+			 * systems. See XHCI_DEFAULT_BESL definition in xhci.h
+			 */
+			field = le32_to_cpu(udev->bos->ext_cap->bmAttributes);
+			if ((field & USB_BESL_SUPPORT) &&
+			    (field & USB_BESL_BASELINE_VALID))
+				hird = USB_GET_BESL_BASELINE(field);
+			else
+				hird = udev->l1_params.besl;
+
+			exit_latency = xhci_besl_encoding[hird];
+			spin_unlock_irqrestore(&xhci->lock, flags);
+
+			/* USB 3.0 code dedicate one xhci->lpm_command->in_ctx
+			 * input context for link powermanagement evaluate
+			 * context commands. It is protected by hcd->bandwidth
+			 * mutex and is shared by all devices. We need to set
+			 * the max ext latency in USB 2 BESL LPM as well, so
+			 * use the same mutex and xhci_change_max_exit_latency()
+			 */
+			mutex_lock(hcd->bandwidth_mutex);
+			ret = xhci_change_max_exit_latency(xhci, udev,
+							   exit_latency);
+			mutex_unlock(hcd->bandwidth_mutex);
+
+			if (ret < 0)
+				return ret;
+			spin_lock_irqsave(&xhci->lock, flags);
+
+			hlpm_val = xhci_calculate_usb2_hw_lpm_params(udev);
+			writel(hlpm_val, hlpm_addr);
+			/* flush write */
+			readl(hlpm_addr);
+		} else {
+			hird = xhci_calculate_hird_besl(xhci, udev);
+		}
+
+		pm_val &= ~PORT_HIRD_MASK;
+		pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
+		writel(pm_val, pm_addr);
+		pm_val = readl(pm_addr);
+		pm_val |= PORT_HLE;
+		writel(pm_val, pm_addr);
+		/* flush write */
+		readl(pm_addr);
+	} else {
+		pm_val &= ~(PORT_HLE | PORT_RWE | PORT_HIRD_MASK | PORT_L1DS_MASK);
+		writel(pm_val, pm_addr);
+		/* flush write */
+		readl(pm_addr);
+		if (udev->usb2_hw_lpm_besl_capable) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			mutex_lock(hcd->bandwidth_mutex);
+			xhci_change_max_exit_latency(xhci, udev, 0);
+			mutex_unlock(hcd->bandwidth_mutex);
+			readl_poll_timeout(ports[port_num]->addr, pm_val,
+					   (pm_val & PORT_PLS_MASK) == XDEV_U0,
+					   100, 10000);
+			return 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return 0;
+}
+
+/* check if a usb2 port supports a given extened capability protocol
+ * only USB2 ports extended protocol capability values are cached.
+ * Return 1 if capability is supported
+ */
+static int xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int port,
+					   unsigned capability)
+{
+	u32 port_offset, port_count;
+	int i;
+
+	for (i = 0; i < xhci->num_ext_caps; i++) {
+		if (xhci->ext_caps[i] & capability) {
+			/* port offsets starts at 1 */
+			port_offset = XHCI_EXT_PORT_OFF(xhci->ext_caps[i]) - 1;
+			port_count = XHCI_EXT_PORT_COUNT(xhci->ext_caps[i]);
+			if (port >= port_offset &&
+			    port < port_offset + port_count)
+				return 1;
+		}
+	}
+	return 0;
+}
+
+static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	int		portnum = udev->portnum - 1;
+
+	if (hcd->speed >= HCD_USB3 || !udev->lpm_capable)
+		return 0;
+
+	/* we only support lpm for non-hub device connected to root hub yet */
+	if (!udev->parent || udev->parent->parent ||
+			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
+		return 0;
+
+	if (xhci->hw_lpm_support == 1 &&
+			xhci_check_usb2_port_capability(
+				xhci, portnum, XHCI_HLC)) {
+		udev->usb2_hw_lpm_capable = 1;
+		udev->l1_params.timeout = XHCI_L1_TIMEOUT;
+		udev->l1_params.besl = XHCI_DEFAULT_BESL;
+		if (xhci_check_usb2_port_capability(xhci, portnum,
+					XHCI_BLC))
+			udev->usb2_hw_lpm_besl_capable = 1;
+	}
+
+	return 0;
+}
+
+/*---------------------- USB 3.0 Link PM functions ------------------------*/
+
+/* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */
+static unsigned long long xhci_service_interval_to_ns(
+		struct usb_endpoint_descriptor *desc)
+{
+	return (1ULL << (desc->bInterval - 1)) * 125 * 1000;
+}
+
+static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	unsigned long long sel;
+	unsigned long long pel;
+	unsigned int max_sel_pel;
+	char *state_name;
+
+	switch (state) {
+	case USB3_LPM_U1:
+		/* Convert SEL and PEL stored in nanoseconds to microseconds */
+		sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
+		pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);
+		max_sel_pel = USB3_LPM_MAX_U1_SEL_PEL;
+		state_name = "U1";
+		break;
+	case USB3_LPM_U2:
+		sel = DIV_ROUND_UP(udev->u2_params.sel, 1000);
+		pel = DIV_ROUND_UP(udev->u2_params.pel, 1000);
+		max_sel_pel = USB3_LPM_MAX_U2_SEL_PEL;
+		state_name = "U2";
+		break;
+	default:
+		dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n",
+				__func__);
+		return USB3_LPM_DISABLED;
+	}
+
+	if (sel <= max_sel_pel && pel <= max_sel_pel)
+		return USB3_LPM_DEVICE_INITIATED;
+
+	if (sel > max_sel_pel)
+		dev_dbg(&udev->dev, "Device-initiated %s disabled "
+				"due to long SEL %llu ms\n",
+				state_name, sel);
+	else
+		dev_dbg(&udev->dev, "Device-initiated %s disabled "
+				"due to long PEL %llu ms\n",
+				state_name, pel);
+	return USB3_LPM_DISABLED;
+}
+
+/* The U1 timeout should be the maximum of the following values:
+ *  - For control endpoints, U1 system exit latency (SEL) * 3
+ *  - For bulk endpoints, U1 SEL * 5
+ *  - For interrupt endpoints:
+ *    - Notification EPs, U1 SEL * 3
+ *    - Periodic EPs, max(105% of bInterval, U1 SEL * 2)
+ *  - For isochronous endpoints, max(105% of bInterval, U1 SEL * 2)
+ */
+static unsigned long long xhci_calculate_intel_u1_timeout(
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+	int ep_type;
+	int intr_type;
+
+	ep_type = usb_endpoint_type(desc);
+	switch (ep_type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		timeout_ns = udev->u1_params.sel * 3;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		timeout_ns = udev->u1_params.sel * 5;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		intr_type = usb_endpoint_interrupt_type(desc);
+		if (intr_type == USB_ENDPOINT_INTR_NOTIFICATION) {
+			timeout_ns = udev->u1_params.sel * 3;
+			break;
+		}
+		/* Otherwise the calculation is the same as isoc eps */
+		fallthrough;
+	case USB_ENDPOINT_XFER_ISOC:
+		timeout_ns = xhci_service_interval_to_ns(desc);
+		timeout_ns = DIV_ROUND_UP_ULL(timeout_ns * 105, 100);
+		if (timeout_ns < udev->u1_params.sel * 2)
+			timeout_ns = udev->u1_params.sel * 2;
+		break;
+	default:
+		return 0;
+	}
+
+	return timeout_ns;
+}
+
+/* Returns the hub-encoded U1 timeout value. */
+static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+
+	/* Prevent U1 if service interval is shorter than U1 exit latency */
+	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+		if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+			dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
+			return USB3_LPM_DISABLED;
+		}
+	}
+
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+	else
+		timeout_ns = udev->u1_params.sel;
+
+	/* The U1 timeout is encoded in 1us intervals.
+	 * Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
+	 */
+	if (timeout_ns == USB3_LPM_DISABLED)
+		timeout_ns = 1;
+	else
+		timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 1000);
+
+	/* If the necessary timeout value is bigger than what we can set in the
+	 * USB 3.0 hub, we have to disable hub-initiated U1.
+	 */
+	if (timeout_ns <= USB3_LPM_U1_MAX_TIMEOUT)
+		return timeout_ns;
+	dev_dbg(&udev->dev, "Hub-initiated U1 disabled "
+			"due to long timeout %llu ms\n", timeout_ns);
+	return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U1);
+}
+
+/* The U2 timeout should be the maximum of:
+ *  - 10 ms (to avoid the bandwidth impact on the scheduler)
+ *  - largest bInterval of any active periodic endpoint (to avoid going
+ *    into lower power link states between intervals).
+ *  - the U2 Exit Latency of the device
+ */
+static unsigned long long xhci_calculate_intel_u2_timeout(
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+	unsigned long long u2_del_ns;
+
+	timeout_ns = 10 * 1000 * 1000;
+
+	if ((usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) &&
+			(xhci_service_interval_to_ns(desc) > timeout_ns))
+		timeout_ns = xhci_service_interval_to_ns(desc);
+
+	u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL;
+	if (u2_del_ns > timeout_ns)
+		timeout_ns = u2_del_ns;
+
+	return timeout_ns;
+}
+
+/* Returns the hub-encoded U2 timeout value. */
+static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc)
+{
+	unsigned long long timeout_ns;
+
+	/* Prevent U2 if service interval is shorter than U2 exit latency */
+	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
+		if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+			dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
+			return USB3_LPM_DISABLED;
+		}
+	}
+
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+	else
+		timeout_ns = udev->u2_params.sel;
+
+	/* The U2 timeout is encoded in 256us intervals */
+	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
+	/* If the necessary timeout value is bigger than what we can set in the
+	 * USB 3.0 hub, we have to disable hub-initiated U2.
+	 */
+	if (timeout_ns <= USB3_LPM_U2_MAX_TIMEOUT)
+		return timeout_ns;
+	dev_dbg(&udev->dev, "Hub-initiated U2 disabled "
+			"due to long timeout %llu ms\n", timeout_ns);
+	return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U2);
+}
+
+static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	if (state == USB3_LPM_U1)
+		return xhci_calculate_u1_timeout(xhci, udev, desc);
+	else if (state == USB3_LPM_U2)
+		return xhci_calculate_u2_timeout(xhci, udev, desc);
+
+	return USB3_LPM_DISABLED;
+}
+
+static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_endpoint_descriptor *desc,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	u16 alt_timeout;
+
+	alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
+		desc, state, timeout);
+
+	/* If we found we can't enable hub-initiated LPM, and
+	 * the U1 or U2 exit latency was too high to allow
+	 * device-initiated LPM as well, then we will disable LPM
+	 * for this device, so stop searching any further.
+	 */
+	if (alt_timeout == USB3_LPM_DISABLED) {
+		*timeout = alt_timeout;
+		return -E2BIG;
+	}
+	if (alt_timeout > *timeout)
+		*timeout = alt_timeout;
+	return 0;
+}
+
+static int xhci_update_timeout_for_interface(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		struct usb_host_interface *alt,
+		enum usb3_link_state state,
+		u16 *timeout)
+{
+	int j;
+
+	for (j = 0; j < alt->desc.bNumEndpoints; j++) {
+		if (xhci_update_timeout_for_endpoint(xhci, udev,
+					&alt->endpoint[j].desc, state, timeout))
+			return -E2BIG;
+		continue;
+	}
+	return 0;
+}
+
+static int xhci_check_intel_tier_policy(struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	struct usb_device *parent;
+	unsigned int num_hubs;
+
+	if (state == USB3_LPM_U2)
+		return 0;
+
+	/* Don't enable U1 if the device is on a 2nd tier hub or lower. */
+	for (parent = udev->parent, num_hubs = 0; parent->parent;
+			parent = parent->parent)
+		num_hubs++;
+
+	if (num_hubs < 2)
+		return 0;
+
+	dev_dbg(&udev->dev, "Disabling U1 link state for device"
+			" below second-tier hub.\n");
+	dev_dbg(&udev->dev, "Plug device into first-tier hub "
+			"to decrease power consumption.\n");
+	return -E2BIG;
+}
+
+static int xhci_check_tier_policy(struct xhci_hcd *xhci,
+		struct usb_device *udev,
+		enum usb3_link_state state)
+{
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		return xhci_check_intel_tier_policy(udev, state);
+	else
+		return 0;
+}
+
+/* Returns the U1 or U2 timeout that should be enabled.
+ * If the tier check or timeout setting functions return with a non-zero exit
+ * code, that means the timeout value has been finalized and we shouldn't look
+ * at any more endpoints.
+ */
+static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct usb_host_config *config;
+	char *state_name;
+	int i;
+	u16 timeout = USB3_LPM_DISABLED;
+
+	if (state == USB3_LPM_U1)
+		state_name = "U1";
+	else if (state == USB3_LPM_U2)
+		state_name = "U2";
+	else {
+		dev_warn(&udev->dev, "Can't enable unknown link state %i\n",
+				state);
+		return timeout;
+	}
+
+	if (xhci_check_tier_policy(xhci, udev, state) < 0)
+		return timeout;
+
+	/* Gather some information about the currently installed configuration
+	 * and alternate interface settings.
+	 */
+	if (xhci_update_timeout_for_endpoint(xhci, udev, &udev->ep0.desc,
+			state, &timeout))
+		return timeout;
+
+	config = udev->actconfig;
+	if (!config)
+		return timeout;
+
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		struct usb_driver *driver;
+		struct usb_interface *intf = config->interface[i];
+
+		if (!intf)
+			continue;
+
+		/* Check if any currently bound drivers want hub-initiated LPM
+		 * disabled.
+		 */
+		if (intf->dev.driver) {
+			driver = to_usb_driver(intf->dev.driver);
+			if (driver && driver->disable_hub_initiated_lpm) {
+				dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+					state_name, driver->name);
+				timeout = xhci_get_timeout_no_hub_lpm(udev,
+								      state);
+				if (timeout == USB3_LPM_DISABLED)
+					return timeout;
+			}
+		}
+
+		/* Not sure how this could happen... */
+		if (!intf->cur_altsetting)
+			continue;
+
+		if (xhci_update_timeout_for_interface(xhci, udev,
+					intf->cur_altsetting,
+					state, &timeout))
+			return timeout;
+	}
+	return timeout;
+}
+
+static int calculate_max_exit_latency(struct usb_device *udev,
+		enum usb3_link_state state_changed,
+		u16 hub_encoded_timeout)
+{
+	unsigned long long u1_mel_us = 0;
+	unsigned long long u2_mel_us = 0;
+	unsigned long long mel_us = 0;
+	bool disabling_u1;
+	bool disabling_u2;
+	bool enabling_u1;
+	bool enabling_u2;
+
+	disabling_u1 = (state_changed == USB3_LPM_U1 &&
+			hub_encoded_timeout == USB3_LPM_DISABLED);
+	disabling_u2 = (state_changed == USB3_LPM_U2 &&
+			hub_encoded_timeout == USB3_LPM_DISABLED);
+
+	enabling_u1 = (state_changed == USB3_LPM_U1 &&
+			hub_encoded_timeout != USB3_LPM_DISABLED);
+	enabling_u2 = (state_changed == USB3_LPM_U2 &&
+			hub_encoded_timeout != USB3_LPM_DISABLED);
+
+	/* If U1 was already enabled and we're not disabling it,
+	 * or we're going to enable U1, account for the U1 max exit latency.
+	 */
+	if ((udev->u1_params.timeout != USB3_LPM_DISABLED && !disabling_u1) ||
+			enabling_u1)
+		u1_mel_us = DIV_ROUND_UP(udev->u1_params.mel, 1000);
+	if ((udev->u2_params.timeout != USB3_LPM_DISABLED && !disabling_u2) ||
+			enabling_u2)
+		u2_mel_us = DIV_ROUND_UP(udev->u2_params.mel, 1000);
+
+	if (u1_mel_us > u2_mel_us)
+		mel_us = u1_mel_us;
+	else
+		mel_us = u2_mel_us;
+	/* xHCI host controller max exit latency field is only 16 bits wide. */
+	if (mel_us > MAX_EXIT) {
+		dev_warn(&udev->dev, "Link PM max exit latency of %lluus "
+				"is too big.\n", mel_us);
+		return -E2BIG;
+	}
+	return mel_us;
+}
+
+/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd	*xhci;
+	struct xhci_port *port;
+	u16 hub_encoded_timeout;
+	int mel;
+	int ret;
+
+	xhci = hcd_to_xhci(hcd);
+	/* The LPM timeout values are pretty host-controller specific, so don't
+	 * enable hub-initiated timeouts unless the vendor has provided
+	 * information about their timeout algorithm.
+	 */
+	if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) ||
+			!xhci->devs[udev->slot_id])
+		return USB3_LPM_DISABLED;
+
+	/* If connected to root port then check port can handle lpm */
+	if (udev->parent && !udev->parent->parent) {
+		port = xhci->usb3_rhub.ports[udev->portnum - 1];
+		if (port->lpm_incapable)
+			return USB3_LPM_DISABLED;
+	}
+
+	hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state);
+	mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout);
+	if (mel < 0) {
+		/* Max Exit Latency is too big, disable LPM. */
+		hub_encoded_timeout = USB3_LPM_DISABLED;
+		mel = 0;
+	}
+
+	ret = xhci_change_max_exit_latency(xhci, udev, mel);
+	if (ret)
+		return ret;
+	return hub_encoded_timeout;
+}
+
+static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	struct xhci_hcd	*xhci;
+	u16 mel;
+
+	xhci = hcd_to_xhci(hcd);
+	if (!xhci || !(xhci->quirks & XHCI_LPM_SUPPORT) ||
+			!xhci->devs[udev->slot_id])
+		return 0;
+
+	mel = calculate_max_exit_latency(udev, state, USB3_LPM_DISABLED);
+	return xhci_change_max_exit_latency(xhci, udev, mel);
+}
+#else /* CONFIG_PM */
+
+static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+				struct usb_device *udev, int enable)
+{
+	return 0;
+}
+
+static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	return 0;
+}
+
+static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	return USB3_LPM_DISABLED;
+}
+
+static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
+			struct usb_device *udev, enum usb3_link_state state)
+{
+	return 0;
+}
+#endif	/* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/* Once a hub descriptor is fetched for a device, we need to update the xHC's
+ * internal data structures for the device.
+ */
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+			struct usb_tt *tt, gfp_t mem_flags)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	struct xhci_virt_device *vdev;
+	struct xhci_command *config_cmd;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	unsigned long flags;
+	unsigned think_time;
+	int ret;
+
+	/* Ignore root hubs */
+	if (!hdev->parent)
+		return 0;
+
+	vdev = xhci->devs[hdev->slot_id];
+	if (!vdev) {
+		xhci_warn(xhci, "Cannot update hub desc for unknown device.\n");
+		return -EINVAL;
+	}
+
+	config_cmd = xhci_alloc_command_with_ctx(xhci, true, mem_flags);
+	if (!config_cmd)
+		return -ENOMEM;
+
+	ctrl_ctx = xhci_get_input_control_ctx(config_cmd->in_ctx);
+	if (!ctrl_ctx) {
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		xhci_free_command(xhci, config_cmd);
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (hdev->speed == USB_SPEED_HIGH &&
+			xhci_alloc_tt_info(xhci, vdev, hdev, tt, GFP_ATOMIC)) {
+		xhci_dbg(xhci, "Could not allocate xHCI TT structure.\n");
+		xhci_free_command(xhci, config_cmd);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		return -ENOMEM;
+	}
+
+	xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
+	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
+	slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
+	slot_ctx->dev_info |= cpu_to_le32(DEV_HUB);
+	/*
+	 * refer to section 6.2.2: MTT should be 0 for full speed hub,
+	 * but it may be already set to 1 when setup an xHCI virtual
+	 * device, so clear it anyway.
+	 */
+	if (tt->multi)
+		slot_ctx->dev_info |= cpu_to_le32(DEV_MTT);
+	else if (hdev->speed == USB_SPEED_FULL)
+		slot_ctx->dev_info &= cpu_to_le32(~DEV_MTT);
+
+	if (xhci->hci_version > 0x95) {
+		xhci_dbg(xhci, "xHCI version %x needs hub "
+				"TT think time and number of ports\n",
+				(unsigned int) xhci->hci_version);
+		slot_ctx->dev_info2 |= cpu_to_le32(XHCI_MAX_PORTS(hdev->maxchild));
+		/* Set TT think time - convert from ns to FS bit times.
+		 * 0 = 8 FS bit times, 1 = 16 FS bit times,
+		 * 2 = 24 FS bit times, 3 = 32 FS bit times.
+		 *
+		 * xHCI 1.0: this field shall be 0 if the device is not a
+		 * High-spped hub.
+		 */
+		think_time = tt->think_time;
+		if (think_time != 0)
+			think_time = (think_time / 666) - 1;
+		if (xhci->hci_version < 0x100 || hdev->speed == USB_SPEED_HIGH)
+			slot_ctx->tt_info |=
+				cpu_to_le32(TT_THINK_TIME(think_time));
+	} else {
+		xhci_dbg(xhci, "xHCI version %x doesn't need hub "
+				"TT think time or number of ports\n",
+				(unsigned int) xhci->hci_version);
+	}
+	slot_ctx->dev_state = 0;
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	xhci_dbg(xhci, "Set up %s for hub device.\n",
+			(xhci->hci_version > 0x95) ?
+			"configure endpoint" : "evaluate context");
+
+	/* Issue and wait for the configure endpoint or
+	 * evaluate context command.
+	 */
+	if (xhci->hci_version > 0x95)
+		ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+				false, false);
+	else
+		ret = xhci_configure_endpoint(xhci, hdev, config_cmd,
+				true, false);
+
+	xhci_free_command(xhci, config_cmd);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(xhci_update_hub_device);
+
+static int xhci_get_frame(struct usb_hcd *hcd)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	/* EHCI mods by the periodic size.  Why? */
+	return readl(&xhci->run_regs->microframe_index) >> 3;
+}
+
+int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+{
+	struct xhci_hcd		*xhci;
+	/*
+	 * TODO: Check with DWC3 clients for sysdev according to
+	 * quirks
+	 */
+	struct device		*dev = hcd->self.sysdev;
+	unsigned int		minor_rev;
+	int			retval;
+
+	/* Accept arbitrarily long scatter-gather lists */
+	hcd->self.sg_tablesize = ~0;
+
+	/* support to build packet from discontinuous buffers */
+	hcd->self.no_sg_constraint = 1;
+
+	/* XHCI controllers don't stop the ep queue on short packets :| */
+	hcd->self.no_stop_on_short = 1;
+
+	xhci = hcd_to_xhci(hcd);
+
+	if (usb_hcd_is_primary_hcd(hcd)) {
+		xhci->main_hcd = hcd;
+		xhci->usb2_rhub.hcd = hcd;
+		/* Mark the first roothub as being USB 2.0.
+		 * The xHCI driver will register the USB 3.0 roothub.
+		 */
+		hcd->speed = HCD_USB2;
+		hcd->self.root_hub->speed = USB_SPEED_HIGH;
+		/*
+		 * USB 2.0 roothub under xHCI has an integrated TT,
+		 * (rate matching hub) as opposed to having an OHCI/UHCI
+		 * companion controller.
+		 */
+		hcd->has_tt = 1;
+	} else {
+		/*
+		 * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
+		 * should return 0x31 for sbrn, or that the minor revision
+		 * is a two digit BCD containig minor and sub-minor numbers.
+		 * This was later clarified in xHCI 1.2.
+		 *
+		 * Some USB 3.1 capable hosts therefore have sbrn 0x30, and
+		 * minor revision set to 0x1 instead of 0x10.
+		 */
+		if (xhci->usb3_rhub.min_rev == 0x1)
+			minor_rev = 1;
+		else
+			minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+
+		switch (minor_rev) {
+		case 2:
+			hcd->speed = HCD_USB32;
+			hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+			hcd->self.root_hub->rx_lanes = 2;
+			hcd->self.root_hub->tx_lanes = 2;
+			break;
+		case 1:
+			hcd->speed = HCD_USB31;
+			hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+			break;
+		}
+		xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n",
+			  minor_rev,
+			  minor_rev ? "Enhanced " : "");
+
+		xhci->usb3_rhub.hcd = hcd;
+		/* xHCI private pointer was set in xhci_pci_probe for the second
+		 * registered roothub.
+		 */
+		return 0;
+	}
+
+	mutex_init(&xhci->mutex);
+	xhci->cap_regs = hcd->regs;
+	xhci->op_regs = hcd->regs +
+		HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
+	xhci->run_regs = hcd->regs +
+		(readl(&xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
+	/* Cache read-only capability registers */
+	xhci->hcs_params1 = readl(&xhci->cap_regs->hcs_params1);
+	xhci->hcs_params2 = readl(&xhci->cap_regs->hcs_params2);
+	xhci->hcs_params3 = readl(&xhci->cap_regs->hcs_params3);
+	xhci->hcc_params = readl(&xhci->cap_regs->hc_capbase);
+	xhci->hci_version = HC_VERSION(xhci->hcc_params);
+	xhci->hcc_params = readl(&xhci->cap_regs->hcc_params);
+	if (xhci->hci_version > 0x100)
+		xhci->hcc_params2 = readl(&xhci->cap_regs->hcc_params2);
+
+	xhci->quirks |= quirks;
+
+	get_quirks(dev, xhci);
+
+	/* In xhci controllers which follow xhci 1.0 spec gives a spurious
+	 * success event after a short transfer. This quirk will ignore such
+	 * spurious event.
+	 */
+	if (xhci->hci_version > 0x96)
+		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+
+	/* Make sure the HC is halted. */
+	retval = xhci_halt(xhci);
+	if (retval)
+		return retval;
+
+	xhci_zero_64b_regs(xhci);
+
+	xhci_dbg(xhci, "Resetting HCD\n");
+	/* Reset the internal HC memory state and registers. */
+	retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC);
+	if (retval)
+		return retval;
+	xhci_dbg(xhci, "Reset complete\n");
+
+	/*
+	 * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0)
+	 * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit
+	 * address memory pointers actually. So, this driver clears the AC64
+	 * bit of xhci->hcc_params to call dma_set_coherent_mask(dev,
+	 * DMA_BIT_MASK(32)) in this xhci_gen_setup().
+	 */
+	if (xhci->quirks & XHCI_NO_64BIT_SUPPORT)
+		xhci->hcc_params &= ~BIT(0);
+
+	/* Set dma_mask and coherent_dma_mask to 64-bits,
+	 * if xHC supports 64-bit addressing */
+	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
+			!dma_set_mask(dev, DMA_BIT_MASK(64))) {
+		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+	} else {
+		/*
+		 * This is to avoid error in cases where a 32-bit USB
+		 * controller is used on a 64-bit capable system.
+		 */
+		retval = dma_set_mask(dev, DMA_BIT_MASK(32));
+		if (retval)
+			return retval;
+		xhci_dbg(xhci, "Enabling 32-bit DMA addresses.\n");
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+	}
+
+	xhci_dbg(xhci, "Calling HCD init\n");
+	/* Initialize HCD and host controller data structures. */
+	retval = xhci_init(hcd);
+	if (retval)
+		return retval;
+	xhci_dbg(xhci, "Called HCD init\n");
+
+	xhci_info(xhci, "hcc params 0x%08x hci version 0x%x quirks 0x%016llx\n",
+		  xhci->hcc_params, xhci->hci_version, xhci->quirks);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_gen_setup);
+
+static void xhci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct usb_device *udev;
+	unsigned int slot_id;
+	unsigned int ep_index;
+	unsigned long flags;
+
+	xhci = hcd_to_xhci(hcd);
+
+	spin_lock_irqsave(&xhci->lock, flags);
+	udev = (struct usb_device *)ep->hcpriv;
+	slot_id = udev->slot_id;
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+
+	xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_CLEARING_TT;
+	xhci_ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
+static const struct hc_driver xhci_hc_driver = {
+	.description =		"xhci-hcd",
+	.product_desc =		"xHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct xhci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			xhci_irq,
+	.flags =		HCD_MEMORY | HCD_DMA | HCD_USB3 | HCD_SHARED |
+				HCD_BH,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		NULL, /* set in xhci_init_driver() */
+	.start =		xhci_run,
+	.stop =			xhci_stop,
+	.shutdown =		xhci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.map_urb_for_dma =      xhci_map_urb_for_dma,
+	.urb_enqueue =		xhci_urb_enqueue,
+	.urb_dequeue =		xhci_urb_dequeue,
+	.alloc_dev =		xhci_alloc_dev,
+	.free_dev =		xhci_free_dev,
+	.alloc_streams =	xhci_alloc_streams,
+	.free_streams =		xhci_free_streams,
+	.add_endpoint =		xhci_add_endpoint,
+	.drop_endpoint =	xhci_drop_endpoint,
+	.endpoint_disable =	xhci_endpoint_disable,
+	.endpoint_reset =	xhci_endpoint_reset,
+	.check_bandwidth =	xhci_check_bandwidth,
+	.reset_bandwidth =	xhci_reset_bandwidth,
+	.address_device =	xhci_address_device,
+	.enable_device =	xhci_enable_device,
+	.update_hub_device =	xhci_update_hub_device,
+	.reset_device =		xhci_discover_or_reset_device,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	xhci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_control =		xhci_hub_control,
+	.hub_status_data =	xhci_hub_status_data,
+	.bus_suspend =		xhci_bus_suspend,
+	.bus_resume =		xhci_bus_resume,
+	.get_resuming_ports =	xhci_get_resuming_ports,
+
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =        xhci_update_device,
+	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
+	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
+	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
+	.find_raw_port_number =	xhci_find_raw_port_number,
+	.clear_tt_buffer_complete = xhci_clear_tt_buffer_complete,
+};
+
+void xhci_init_driver(struct hc_driver *drv,
+		      const struct xhci_driver_overrides *over)
+{
+	BUG_ON(!over);
+
+	/* Copy the generic table to drv then apply the overrides */
+	*drv = xhci_hc_driver;
+
+	if (over) {
+		drv->hcd_priv_size += over->extra_priv_size;
+		if (over->reset)
+			drv->reset = over->reset;
+		if (over->start)
+			drv->start = over->start;
+		if (over->check_bandwidth)
+			drv->check_bandwidth = over->check_bandwidth;
+		if (over->reset_bandwidth)
+			drv->reset_bandwidth = over->reset_bandwidth;
+		if (over->update_hub_device)
+			drv->update_hub_device = over->update_hub_device;
+	}
+}
+EXPORT_SYMBOL_GPL(xhci_init_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static int __init xhci_hcd_init(void)
+{
+	/*
+	 * Check the compiler generated sizes of structures that must be laid
+	 * out in specific ways for hardware access.
+	 */
+	BUILD_BUG_ON(sizeof(struct xhci_doorbell_array) != 256*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_slot_ctx) != 8*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_ep_ctx) != 8*32/8);
+	/* xhci_device_control has eight fields, and also
+	 * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
+	 */
+	BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
+	BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_cap_regs) != 8*32/8);
+	BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
+	/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
+	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	xhci_debugfs_create_root();
+
+	return 0;
+}
+
+/*
+ * If an init function is provided, an exit function must also be provided
+ * to allow module unload.
+ */
+static void __exit xhci_hcd_fini(void)
+{
+	xhci_debugfs_remove_root();
+}
+
+module_init(xhci_hcd_init);
+module_exit(xhci_hcd_fini);