Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 681 insertions, 0 deletions

diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c
new file mode 100644
index 000000000..9b50bc96e
--- /dev/null
+++ b/drivers/video/backlight/hx8357.c
@@ -0,0 +1,681 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for the Himax HX-8357 LCD Controller
+ *
+ * Copyright 2012 Free Electrons
+ */
+
+#include <linux/delay.h>
+#include <linux/lcd.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/spi/spi.h>
+
+#define HX8357_NUM_IM_PINS	3
+
+#define HX8357_SWRESET			0x01
+#define HX8357_GET_RED_CHANNEL		0x06
+#define HX8357_GET_GREEN_CHANNEL	0x07
+#define HX8357_GET_BLUE_CHANNEL		0x08
+#define HX8357_GET_POWER_MODE		0x0a
+#define HX8357_GET_MADCTL		0x0b
+#define HX8357_GET_PIXEL_FORMAT		0x0c
+#define HX8357_GET_DISPLAY_MODE		0x0d
+#define HX8357_GET_SIGNAL_MODE		0x0e
+#define HX8357_GET_DIAGNOSTIC_RESULT	0x0f
+#define HX8357_ENTER_SLEEP_MODE		0x10
+#define HX8357_EXIT_SLEEP_MODE		0x11
+#define HX8357_ENTER_PARTIAL_MODE	0x12
+#define HX8357_ENTER_NORMAL_MODE	0x13
+#define HX8357_EXIT_INVERSION_MODE	0x20
+#define HX8357_ENTER_INVERSION_MODE	0x21
+#define HX8357_SET_DISPLAY_OFF		0x28
+#define HX8357_SET_DISPLAY_ON		0x29
+#define HX8357_SET_COLUMN_ADDRESS	0x2a
+#define HX8357_SET_PAGE_ADDRESS		0x2b
+#define HX8357_WRITE_MEMORY_START	0x2c
+#define HX8357_READ_MEMORY_START	0x2e
+#define HX8357_SET_PARTIAL_AREA		0x30
+#define HX8357_SET_SCROLL_AREA		0x33
+#define HX8357_SET_TEAR_OFF		0x34
+#define HX8357_SET_TEAR_ON		0x35
+#define HX8357_SET_ADDRESS_MODE		0x36
+#define HX8357_SET_SCROLL_START		0x37
+#define HX8357_EXIT_IDLE_MODE		0x38
+#define HX8357_ENTER_IDLE_MODE		0x39
+#define HX8357_SET_PIXEL_FORMAT		0x3a
+#define HX8357_SET_PIXEL_FORMAT_DBI_3BIT	(0x1)
+#define HX8357_SET_PIXEL_FORMAT_DBI_16BIT	(0x5)
+#define HX8357_SET_PIXEL_FORMAT_DBI_18BIT	(0x6)
+#define HX8357_SET_PIXEL_FORMAT_DPI_3BIT	(0x1 << 4)
+#define HX8357_SET_PIXEL_FORMAT_DPI_16BIT	(0x5 << 4)
+#define HX8357_SET_PIXEL_FORMAT_DPI_18BIT	(0x6 << 4)
+#define HX8357_WRITE_MEMORY_CONTINUE	0x3c
+#define HX8357_READ_MEMORY_CONTINUE	0x3e
+#define HX8357_SET_TEAR_SCAN_LINES	0x44
+#define HX8357_GET_SCAN_LINES		0x45
+#define HX8357_READ_DDB_START		0xa1
+#define HX8357_SET_DISPLAY_MODE		0xb4
+#define HX8357_SET_DISPLAY_MODE_RGB_THROUGH	(0x3)
+#define HX8357_SET_DISPLAY_MODE_RGB_INTERFACE	(1 << 4)
+#define HX8357_SET_PANEL_DRIVING	0xc0
+#define HX8357_SET_DISPLAY_FRAME	0xc5
+#define HX8357_SET_RGB			0xc6
+#define HX8357_SET_RGB_ENABLE_HIGH		(1 << 1)
+#define HX8357_SET_GAMMA		0xc8
+#define HX8357_SET_POWER		0xd0
+#define HX8357_SET_VCOM			0xd1
+#define HX8357_SET_POWER_NORMAL		0xd2
+#define HX8357_SET_PANEL_RELATED	0xe9
+
+#define HX8369_SET_DISPLAY_BRIGHTNESS		0x51
+#define HX8369_WRITE_CABC_DISPLAY_VALUE		0x53
+#define HX8369_WRITE_CABC_BRIGHT_CTRL		0x55
+#define HX8369_WRITE_CABC_MIN_BRIGHTNESS	0x5e
+#define HX8369_SET_POWER			0xb1
+#define HX8369_SET_DISPLAY_MODE			0xb2
+#define HX8369_SET_DISPLAY_WAVEFORM_CYC		0xb4
+#define HX8369_SET_VCOM				0xb6
+#define HX8369_SET_EXTENSION_COMMAND		0xb9
+#define HX8369_SET_GIP				0xd5
+#define HX8369_SET_GAMMA_CURVE_RELATED		0xe0
+
+struct hx8357_data {
+	unsigned		im_pins[HX8357_NUM_IM_PINS];
+	unsigned		reset;
+	struct spi_device	*spi;
+	int			state;
+	bool			use_im_pins;
+};
+
+static u8 hx8357_seq_power[] = {
+	HX8357_SET_POWER, 0x44, 0x41, 0x06,
+};
+
+static u8 hx8357_seq_vcom[] = {
+	HX8357_SET_VCOM, 0x40, 0x10,
+};
+
+static u8 hx8357_seq_power_normal[] = {
+	HX8357_SET_POWER_NORMAL, 0x05, 0x12,
+};
+
+static u8 hx8357_seq_panel_driving[] = {
+	HX8357_SET_PANEL_DRIVING, 0x14, 0x3b, 0x00, 0x02, 0x11,
+};
+
+static u8 hx8357_seq_display_frame[] = {
+	HX8357_SET_DISPLAY_FRAME, 0x0c,
+};
+
+static u8 hx8357_seq_panel_related[] = {
+	HX8357_SET_PANEL_RELATED, 0x01,
+};
+
+static u8 hx8357_seq_undefined1[] = {
+	0xea, 0x03, 0x00, 0x00,
+};
+
+static u8 hx8357_seq_undefined2[] = {
+	0xeb, 0x40, 0x54, 0x26, 0xdb,
+};
+
+static u8 hx8357_seq_gamma[] = {
+	HX8357_SET_GAMMA, 0x00, 0x15, 0x00, 0x22, 0x00,
+	0x08, 0x77, 0x26, 0x77, 0x22, 0x04, 0x00,
+};
+
+static u8 hx8357_seq_address_mode[] = {
+	HX8357_SET_ADDRESS_MODE, 0xc0,
+};
+
+static u8 hx8357_seq_pixel_format[] = {
+	HX8357_SET_PIXEL_FORMAT,
+	HX8357_SET_PIXEL_FORMAT_DPI_18BIT |
+	HX8357_SET_PIXEL_FORMAT_DBI_18BIT,
+};
+
+static u8 hx8357_seq_column_address[] = {
+	HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f,
+};
+
+static u8 hx8357_seq_page_address[] = {
+	HX8357_SET_PAGE_ADDRESS, 0x00, 0x00, 0x01, 0xdf,
+};
+
+static u8 hx8357_seq_rgb[] = {
+	HX8357_SET_RGB, 0x02,
+};
+
+static u8 hx8357_seq_display_mode[] = {
+	HX8357_SET_DISPLAY_MODE,
+	HX8357_SET_DISPLAY_MODE_RGB_THROUGH |
+	HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
+};
+
+static u8 hx8369_seq_write_CABC_min_brightness[] = {
+	HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
+};
+
+static u8 hx8369_seq_write_CABC_control[] = {
+	HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
+};
+
+static u8 hx8369_seq_set_display_brightness[] = {
+	HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
+};
+
+static u8 hx8369_seq_write_CABC_control_setting[] = {
+	HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
+};
+
+static u8 hx8369_seq_extension_command[] = {
+	HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
+};
+
+static u8 hx8369_seq_display_related[] = {
+	HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
+	0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00,	0x01,
+};
+
+static u8 hx8369_seq_panel_waveform_cycle[] = {
+	HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
+};
+
+static u8 hx8369_seq_set_address_mode[] = {
+	HX8357_SET_ADDRESS_MODE, 0x00,
+};
+
+static u8 hx8369_seq_vcom[] = {
+	HX8369_SET_VCOM, 0x3e, 0x3e,
+};
+
+static u8 hx8369_seq_gip[] = {
+	HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
+	0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
+	0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
+};
+
+static u8 hx8369_seq_power[] = {
+	HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
+	0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
+};
+
+static u8 hx8369_seq_gamma_curve_related[] = {
+	HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
+	0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+	0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
+	0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+};
+
+static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
+				u8 *txbuf, u16 txlen,
+				u8 *rxbuf, u16 rxlen)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u16 *local_txbuf = NULL;
+	int ret = 0;
+
+	memset(xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	if (txlen) {
+		int i;
+
+		local_txbuf = kcalloc(txlen, sizeof(*local_txbuf), GFP_KERNEL);
+
+		if (!local_txbuf)
+			return -ENOMEM;
+
+		for (i = 0; i < txlen; i++) {
+			local_txbuf[i] = txbuf[i];
+			if (i > 0)
+				local_txbuf[i] |= 1 << 8;
+		}
+
+		xfer[0].len = 2 * txlen;
+		xfer[0].bits_per_word = 9;
+		xfer[0].tx_buf = local_txbuf;
+		spi_message_add_tail(&xfer[0], &msg);
+	}
+
+	if (rxlen) {
+		xfer[1].len = rxlen;
+		xfer[1].bits_per_word = 8;
+		xfer[1].rx_buf = rxbuf;
+		spi_message_add_tail(&xfer[1], &msg);
+	}
+
+	ret = spi_sync(lcd->spi, &msg);
+	if (ret < 0)
+		dev_err(&lcdev->dev, "Couldn't send SPI data\n");
+
+	if (txlen)
+		kfree(local_txbuf);
+
+	return ret;
+}
+
+static inline int hx8357_spi_write_array(struct lcd_device *lcdev,
+					u8 *value, u8 len)
+{
+	return hx8357_spi_write_then_read(lcdev, value, len, NULL, 0);
+}
+
+static inline int hx8357_spi_write_byte(struct lcd_device *lcdev,
+					u8 value)
+{
+	return hx8357_spi_write_then_read(lcdev, &value, 1, NULL, 0);
+}
+
+static int hx8357_enter_standby(struct lcd_device *lcdev)
+{
+	int ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_OFF);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_ENTER_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The controller needs 120ms when entering in sleep mode before we can
+	 * send the command to go off sleep mode
+	 */
+	msleep(120);
+
+	return 0;
+}
+
+static int hx8357_exit_standby(struct lcd_device *lcdev)
+{
+	int ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The controller needs 120ms when exiting from sleep mode before we
+	 * can send the command to enter in sleep mode
+	 */
+	msleep(120);
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void hx8357_lcd_reset(struct lcd_device *lcdev)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+
+	/* Reset the screen */
+	gpio_set_value(lcd->reset, 1);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 0);
+	usleep_range(10000, 12000);
+	gpio_set_value(lcd->reset, 1);
+
+	/* The controller needs 120ms to recover from reset */
+	msleep(120);
+}
+
+static int hx8357_lcd_init(struct lcd_device *lcdev)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+	int ret;
+
+	/*
+	 * Set the interface selection pins to SPI mode, with three
+	 * wires
+	 */
+	if (lcd->use_im_pins) {
+		gpio_set_value_cansleep(lcd->im_pins[0], 1);
+		gpio_set_value_cansleep(lcd->im_pins[1], 0);
+		gpio_set_value_cansleep(lcd->im_pins[2], 1);
+	}
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
+				ARRAY_SIZE(hx8357_seq_power));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_vcom,
+				ARRAY_SIZE(hx8357_seq_vcom));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_power_normal,
+				ARRAY_SIZE(hx8357_seq_power_normal));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_panel_driving,
+				ARRAY_SIZE(hx8357_seq_panel_driving));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_display_frame,
+				ARRAY_SIZE(hx8357_seq_display_frame));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_panel_related,
+				ARRAY_SIZE(hx8357_seq_panel_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_undefined1,
+				ARRAY_SIZE(hx8357_seq_undefined1));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_undefined2,
+				ARRAY_SIZE(hx8357_seq_undefined2));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_gamma,
+				ARRAY_SIZE(hx8357_seq_gamma));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_address_mode,
+				ARRAY_SIZE(hx8357_seq_address_mode));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_pixel_format,
+				ARRAY_SIZE(hx8357_seq_pixel_format));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_column_address,
+				ARRAY_SIZE(hx8357_seq_column_address));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_page_address,
+				ARRAY_SIZE(hx8357_seq_page_address));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_rgb,
+				ARRAY_SIZE(hx8357_seq_rgb));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8357_seq_display_mode,
+				ARRAY_SIZE(hx8357_seq_display_mode));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
+	msleep(120);
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(5000, 7000);
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_WRITE_MEMORY_START);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int hx8369_lcd_init(struct lcd_device *lcdev)
+{
+	int ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
+				ARRAY_SIZE(hx8369_seq_extension_command));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
+				ARRAY_SIZE(hx8369_seq_display_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
+				ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
+				ARRAY_SIZE(hx8369_seq_set_address_mode));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
+				ARRAY_SIZE(hx8369_seq_vcom));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
+				ARRAY_SIZE(hx8369_seq_gip));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
+				ARRAY_SIZE(hx8369_seq_power));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The controller needs 120ms to fully recover from exiting sleep mode
+	 */
+	msleep(120);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
+				ARRAY_SIZE(hx8369_seq_gamma_curve_related));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+	if (ret < 0)
+		return ret;
+	usleep_range(1000, 1200);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
+				ARRAY_SIZE(hx8369_seq_write_CABC_control));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_control_setting,
+			ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_array(lcdev,
+			hx8369_seq_write_CABC_min_brightness,
+			ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
+	if (ret < 0)
+		return ret;
+	usleep_range(10000, 12000);
+
+	ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
+				ARRAY_SIZE(hx8369_seq_set_display_brightness));
+	if (ret < 0)
+		return ret;
+
+	ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+#define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
+
+static int hx8357_set_power(struct lcd_device *lcdev, int power)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+	int ret = 0;
+
+	if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->state))
+		ret = hx8357_exit_standby(lcdev);
+	else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->state))
+		ret = hx8357_enter_standby(lcdev);
+
+	if (ret == 0)
+		lcd->state = power;
+	else
+		dev_warn(&lcdev->dev, "failed to set power mode %d\n", power);
+
+	return ret;
+}
+
+static int hx8357_get_power(struct lcd_device *lcdev)
+{
+	struct hx8357_data *lcd = lcd_get_data(lcdev);
+
+	return lcd->state;
+}
+
+static struct lcd_ops hx8357_ops = {
+	.set_power	= hx8357_set_power,
+	.get_power	= hx8357_get_power,
+};
+
+static const struct of_device_id hx8357_dt_ids[] = {
+	{
+		.compatible = "himax,hx8357",
+		.data = hx8357_lcd_init,
+	},
+	{
+		.compatible = "himax,hx8369",
+		.data = hx8369_lcd_init,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
+
+static int hx8357_probe(struct spi_device *spi)
+{
+	struct lcd_device *lcdev;
+	struct hx8357_data *lcd;
+	const struct of_device_id *match;
+	int i, ret;
+
+	lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
+	if (!lcd)
+		return -ENOMEM;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&spi->dev, "SPI setup failed.\n");
+		return ret;
+	}
+
+	lcd->spi = spi;
+
+	match = of_match_device(hx8357_dt_ids, &spi->dev);
+	if (!match || !match->data)
+		return -EINVAL;
+
+	lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
+	if (!gpio_is_valid(lcd->reset)) {
+		dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
+		return -EINVAL;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, lcd->reset,
+				    GPIOF_OUT_INIT_HIGH,
+				    "hx8357-reset");
+	if (ret) {
+		dev_err(&spi->dev,
+			"failed to request gpio %d: %d\n",
+			lcd->reset, ret);
+		return -EINVAL;
+	}
+
+	if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
+		lcd->use_im_pins = 1;
+
+		for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
+			lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
+							    "im-gpios", i);
+			if (lcd->im_pins[i] == -EPROBE_DEFER) {
+				dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
+				return -EPROBE_DEFER;
+			}
+			if (!gpio_is_valid(lcd->im_pins[i])) {
+				dev_err(&spi->dev, "Missing dt property: im-gpios\n");
+				return -EINVAL;
+			}
+
+			ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
+						    GPIOF_OUT_INIT_LOW,
+						    "im_pins");
+			if (ret) {
+				dev_err(&spi->dev, "failed to request gpio %d: %d\n",
+					lcd->im_pins[i], ret);
+				return -EINVAL;
+			}
+		}
+	} else {
+		lcd->use_im_pins = 0;
+	}
+
+	lcdev = devm_lcd_device_register(&spi->dev, "mxsfb", &spi->dev, lcd,
+					&hx8357_ops);
+	if (IS_ERR(lcdev)) {
+		ret = PTR_ERR(lcdev);
+		return ret;
+	}
+	spi_set_drvdata(spi, lcdev);
+
+	hx8357_lcd_reset(lcdev);
+
+	ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
+	if (ret) {
+		dev_err(&spi->dev, "Couldn't initialize panel\n");
+		return ret;
+	}
+
+	dev_info(&spi->dev, "Panel probed\n");
+
+	return 0;
+}
+
+static struct spi_driver hx8357_driver = {
+	.probe  = hx8357_probe,
+	.driver = {
+		.name = "hx8357",
+		.of_match_table = hx8357_dt_ids,
+	},
+};
+
+module_spi_driver(hx8357_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Himax HX-8357 LCD Driver");
+MODULE_LICENSE("GPL");