Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1999 insertions, 0 deletions

diff --git a/drivers/video/fbdev/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c
new file mode 100644
index 000000000..5d564e867
--- /dev/null
+++ b/drivers/video/fbdev/fsl-diu-fb.c
@@ -0,0 +1,1999 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *  Freescale DIU Frame Buffer device driver
+ *
+ *  Authors: Hongjun Chen <hong-jun.chen@freescale.com>
+ *           Paul Widmer <paul.widmer@freescale.com>
+ *           Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *           York Sun <yorksun@freescale.com>
+ *
+ *   Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+#include <linux/spinlock.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <sysdev/fsl_soc.h>
+#include <linux/fsl-diu-fb.h>
+#include "edid.h"
+
+#define NUM_AOIS	5	/* 1 for plane 0, 2 for planes 1 & 2 each */
+
+/* HW cursor parameters */
+#define MAX_CURS		32
+
+/* INT_STATUS/INT_MASK field descriptions */
+#define INT_VSYNC	0x01	/* Vsync interrupt  */
+#define INT_VSYNC_WB	0x02	/* Vsync interrupt for write back operation */
+#define INT_UNDRUN	0x04	/* Under run exception interrupt */
+#define INT_PARERR	0x08	/* Display parameters error interrupt */
+#define INT_LS_BF_VS	0x10	/* Lines before vsync. interrupt */
+
+/*
+ * List of supported video modes
+ *
+ * The first entry is the default video mode.  The remain entries are in
+ * order if increasing resolution and frequency.  The 320x240-60 mode is
+ * the initial AOI for the second and third planes.
+ */
+static struct fb_videomode fsl_diu_mode_db[] = {
+	{
+		.refresh	= 60,
+		.xres		= 1024,
+		.yres		= 768,
+		.pixclock	= 15385,
+		.left_margin	= 160,
+		.right_margin	= 24,
+		.upper_margin	= 29,
+		.lower_margin	= 3,
+		.hsync_len	= 136,
+		.vsync_len	= 6,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= 79440,
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 16,
+		.lower_margin	= 5,
+		.hsync_len	= 48,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh        = 60,
+		.xres           = 640,
+		.yres           = 480,
+		.pixclock       = 39722,
+		.left_margin    = 48,
+		.right_margin   = 16,
+		.upper_margin   = 33,
+		.lower_margin   = 10,
+		.hsync_len      = 96,
+		.vsync_len      = 2,
+		.sync           = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode          = FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh        = 72,
+		.xres           = 640,
+		.yres           = 480,
+		.pixclock       = 32052,
+		.left_margin    = 128,
+		.right_margin   = 24,
+		.upper_margin   = 28,
+		.lower_margin   = 9,
+		.hsync_len      = 40,
+		.vsync_len      = 3,
+		.sync           = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode          = FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh        = 75,
+		.xres           = 640,
+		.yres           = 480,
+		.pixclock       = 31747,
+		.left_margin    = 120,
+		.right_margin   = 16,
+		.upper_margin   = 16,
+		.lower_margin   = 1,
+		.hsync_len      = 64,
+		.vsync_len      = 3,
+		.sync           = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode          = FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh        = 90,
+		.xres           = 640,
+		.yres           = 480,
+		.pixclock       = 25057,
+		.left_margin    = 120,
+		.right_margin   = 32,
+		.upper_margin   = 14,
+		.lower_margin   = 25,
+		.hsync_len      = 40,
+		.vsync_len      = 14,
+		.sync           = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode          = FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh        = 100,
+		.xres           = 640,
+		.yres           = 480,
+		.pixclock       = 22272,
+		.left_margin    = 48,
+		.right_margin   = 32,
+		.upper_margin   = 17,
+		.lower_margin   = 22,
+		.hsync_len      = 128,
+		.vsync_len      = 12,
+		.sync           = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode          = FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= 33805,
+		.left_margin	= 96,
+		.right_margin	= 24,
+		.upper_margin	= 10,
+		.lower_margin	= 3,
+		.hsync_len	= 72,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh        = 60,
+		.xres           = 800,
+		.yres           = 600,
+		.pixclock       = 25000,
+		.left_margin    = 88,
+		.right_margin   = 40,
+		.upper_margin   = 23,
+		.lower_margin   = 1,
+		.hsync_len      = 128,
+		.vsync_len      = 4,
+		.sync           = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode          = FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 60,
+		.xres		= 854,
+		.yres		= 480,
+		.pixclock	= 31518,
+		.left_margin	= 104,
+		.right_margin	= 16,
+		.upper_margin	= 13,
+		.lower_margin	= 1,
+		.hsync_len	= 88,
+		.vsync_len	= 3,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 70,
+		.xres		= 1024,
+		.yres		= 768,
+		.pixclock	= 16886,
+		.left_margin	= 3,
+		.right_margin	= 3,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.hsync_len	= 40,
+		.vsync_len	= 18,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 75,
+		.xres		= 1024,
+		.yres		= 768,
+		.pixclock	= 15009,
+		.left_margin	= 3,
+		.right_margin	= 3,
+		.upper_margin	= 2,
+		.lower_margin	= 2,
+		.hsync_len	= 80,
+		.vsync_len	= 32,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 60,
+		.xres		= 1280,
+		.yres		= 480,
+		.pixclock	= 18939,
+		.left_margin	= 353,
+		.right_margin	= 47,
+		.upper_margin	= 39,
+		.lower_margin	= 4,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 60,
+		.xres		= 1280,
+		.yres		= 720,
+		.pixclock	= 13426,
+		.left_margin	= 192,
+		.right_margin	= 64,
+		.upper_margin	= 22,
+		.lower_margin	= 1,
+		.hsync_len	= 136,
+		.vsync_len	= 3,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 60,
+		.xres		= 1280,
+		.yres		= 1024,
+		.pixclock	= 9375,
+		.left_margin	= 38,
+		.right_margin	= 128,
+		.upper_margin	= 2,
+		.lower_margin	= 7,
+		.hsync_len	= 216,
+		.vsync_len	= 37,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 70,
+		.xres		= 1280,
+		.yres		= 1024,
+		.pixclock	= 9380,
+		.left_margin	= 6,
+		.right_margin	= 6,
+		.upper_margin	= 4,
+		.lower_margin	= 4,
+		.hsync_len	= 60,
+		.vsync_len	= 94,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 75,
+		.xres		= 1280,
+		.yres		= 1024,
+		.pixclock	= 9380,
+		.left_margin	= 6,
+		.right_margin	= 6,
+		.upper_margin	= 4,
+		.lower_margin	= 4,
+		.hsync_len	= 60,
+		.vsync_len	= 15,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+	{
+		.refresh	= 60,
+		.xres		= 1920,
+		.yres		= 1080,
+		.pixclock	= 5787,
+		.left_margin	= 328,
+		.right_margin	= 120,
+		.upper_margin	= 34,
+		.lower_margin	= 1,
+		.hsync_len	= 208,
+		.vsync_len	= 3,
+		.sync		= FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED
+	},
+};
+
+static char *fb_mode;
+static unsigned long default_bpp = 32;
+static enum fsl_diu_monitor_port monitor_port;
+static char *monitor_string;
+
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+static u8 *coherence_data;
+static size_t coherence_data_size;
+static unsigned int d_cache_line_size;
+#endif
+
+static DEFINE_SPINLOCK(diu_lock);
+
+enum mfb_index {
+	PLANE0 = 0,	/* Plane 0, only one AOI that fills the screen */
+	PLANE1_AOI0,	/* Plane 1, first AOI */
+	PLANE1_AOI1,	/* Plane 1, second AOI */
+	PLANE2_AOI0,	/* Plane 2, first AOI */
+	PLANE2_AOI1,	/* Plane 2, second AOI */
+};
+
+struct mfb_info {
+	enum mfb_index index;
+	char *id;
+	int registered;
+	unsigned long pseudo_palette[16];
+	struct diu_ad *ad;
+	unsigned char g_alpha;
+	unsigned int count;
+	int x_aoi_d;		/* aoi display x offset to physical screen */
+	int y_aoi_d;		/* aoi display y offset to physical screen */
+	struct fsl_diu_data *parent;
+};
+
+/**
+ * struct fsl_diu_data - per-DIU data structure
+ * @dma_addr: DMA address of this structure
+ * @fsl_diu_info: fb_info objects, one per AOI
+ * @dev_attr: sysfs structure
+ * @irq: IRQ
+ * @monitor_port: the monitor port this DIU is connected to
+ * @diu_reg: pointer to the DIU hardware registers
+ * @reg_lock: spinlock for register access
+ * @dummy_aoi: video buffer for the 4x4 32-bit dummy AOI
+ * dummy_ad: DIU Area Descriptor for the dummy AOI
+ * @ad[]: Area Descriptors for each real AOI
+ * @gamma: gamma color table
+ * @cursor: hardware cursor data
+ * @blank_cursor: blank cursor for hiding cursor
+ * @next_cursor: scratch space to build load cursor
+ * @edid_data: EDID information buffer
+ * @has_edid: whether or not the EDID buffer is valid
+ *
+ * This data structure must be allocated with 32-byte alignment, so that the
+ * internal fields can be aligned properly.
+ */
+struct fsl_diu_data {
+	dma_addr_t dma_addr;
+	struct fb_info fsl_diu_info[NUM_AOIS];
+	struct mfb_info mfb[NUM_AOIS];
+	struct device_attribute dev_attr;
+	unsigned int irq;
+	enum fsl_diu_monitor_port monitor_port;
+	struct diu __iomem *diu_reg;
+	spinlock_t reg_lock;
+	u8 dummy_aoi[4 * 4 * 4];
+	struct diu_ad dummy_ad __aligned(8);
+	struct diu_ad ad[NUM_AOIS] __aligned(8);
+	u8 gamma[256 * 3] __aligned(32);
+	/* It's easier to parse the cursor data as little-endian */
+	__le16 cursor[MAX_CURS * MAX_CURS] __aligned(32);
+	/* Blank cursor data -- used to hide the cursor */
+	__le16 blank_cursor[MAX_CURS * MAX_CURS] __aligned(32);
+	/* Scratch cursor data -- used to build new cursor */
+	__le16 next_cursor[MAX_CURS * MAX_CURS] __aligned(32);
+	uint8_t edid_data[EDID_LENGTH];
+	bool has_edid;
+} __aligned(32);
+
+/* Determine the DMA address of a member of the fsl_diu_data structure */
+#define DMA_ADDR(p, f) ((p)->dma_addr + offsetof(struct fsl_diu_data, f))
+
+static const struct mfb_info mfb_template[] = {
+	{
+		.index = PLANE0,
+		.id = "Panel0",
+		.registered = 0,
+		.count = 0,
+		.x_aoi_d = 0,
+		.y_aoi_d = 0,
+	},
+	{
+		.index = PLANE1_AOI0,
+		.id = "Panel1 AOI0",
+		.registered = 0,
+		.g_alpha = 0xff,
+		.count = 0,
+		.x_aoi_d = 0,
+		.y_aoi_d = 0,
+	},
+	{
+		.index = PLANE1_AOI1,
+		.id = "Panel1 AOI1",
+		.registered = 0,
+		.g_alpha = 0xff,
+		.count = 0,
+		.x_aoi_d = 0,
+		.y_aoi_d = 480,
+	},
+	{
+		.index = PLANE2_AOI0,
+		.id = "Panel2 AOI0",
+		.registered = 0,
+		.g_alpha = 0xff,
+		.count = 0,
+		.x_aoi_d = 640,
+		.y_aoi_d = 0,
+	},
+	{
+		.index = PLANE2_AOI1,
+		.id = "Panel2 AOI1",
+		.registered = 0,
+		.g_alpha = 0xff,
+		.count = 0,
+		.x_aoi_d = 640,
+		.y_aoi_d = 480,
+	},
+};
+
+#ifdef DEBUG
+static void __attribute__ ((unused)) fsl_diu_dump(struct diu __iomem *hw)
+{
+	mb();
+	pr_debug("DIU: desc=%08x,%08x,%08x, gamma=%08x palette=%08x "
+		 "cursor=%08x curs_pos=%08x diu_mode=%08x bgnd=%08x "
+		 "disp_size=%08x hsyn_para=%08x vsyn_para=%08x syn_pol=%08x "
+		 "thresholds=%08x int_mask=%08x plut=%08x\n",
+		 hw->desc[0], hw->desc[1], hw->desc[2], hw->gamma,
+		 hw->palette, hw->cursor, hw->curs_pos, hw->diu_mode,
+		 hw->bgnd, hw->disp_size, hw->hsyn_para, hw->vsyn_para,
+		 hw->syn_pol, hw->thresholds, hw->int_mask, hw->plut);
+	rmb();
+}
+#endif
+
+/**
+ * fsl_diu_name_to_port - convert a port name to a monitor port enum
+ *
+ * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns
+ * the enum fsl_diu_monitor_port that corresponds to that string.
+ *
+ * For compatibility with older versions, a number ("0", "1", or "2") is also
+ * supported.
+ *
+ * If the string is unknown, DVI is assumed.
+ *
+ * If the particular port is not supported by the platform, another port
+ * (platform-specific) is chosen instead.
+ */
+static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
+{
+	enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI;
+	unsigned long val;
+
+	if (s) {
+		if (!kstrtoul(s, 10, &val) && (val <= 2))
+			port = (enum fsl_diu_monitor_port) val;
+		else if (strncmp(s, "lvds", 4) == 0)
+			port = FSL_DIU_PORT_LVDS;
+		else if (strncmp(s, "dlvds", 5) == 0)
+			port = FSL_DIU_PORT_DLVDS;
+	}
+
+	if (diu_ops.valid_monitor_port)
+		port = diu_ops.valid_monitor_port(port);
+
+	return port;
+}
+
+/*
+ * Workaround for failed writing desc register of planes.
+ * Needed with MPC5121 DIU rev 2.0 silicon.
+ */
+static void wr_reg_wa(u32 *reg, u32 val)
+{
+	do {
+		out_be32(reg, val);
+	} while (in_be32(reg) != val);
+}
+
+static void fsl_diu_enable_panel(struct fb_info *info)
+{
+	struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
+	struct diu_ad *ad = mfbi->ad;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu __iomem *hw = data->diu_reg;
+
+	switch (mfbi->index) {
+	case PLANE0:
+		wr_reg_wa(&hw->desc[0], ad->paddr);
+		break;
+	case PLANE1_AOI0:
+		cmfbi = &data->mfb[2];
+		if (hw->desc[1] != ad->paddr) {	/* AOI0 closed */
+			if (cmfbi->count > 0)	/* AOI1 open */
+				ad->next_ad =
+					cpu_to_le32(cmfbi->ad->paddr);
+			else
+				ad->next_ad = 0;
+			wr_reg_wa(&hw->desc[1], ad->paddr);
+		}
+		break;
+	case PLANE2_AOI0:
+		cmfbi = &data->mfb[4];
+		if (hw->desc[2] != ad->paddr) {	/* AOI0 closed */
+			if (cmfbi->count > 0)	/* AOI1 open */
+				ad->next_ad =
+					cpu_to_le32(cmfbi->ad->paddr);
+			else
+				ad->next_ad = 0;
+			wr_reg_wa(&hw->desc[2], ad->paddr);
+		}
+		break;
+	case PLANE1_AOI1:
+		pmfbi = &data->mfb[1];
+		ad->next_ad = 0;
+		if (hw->desc[1] == data->dummy_ad.paddr)
+			wr_reg_wa(&hw->desc[1], ad->paddr);
+		else					/* AOI0 open */
+			pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
+		break;
+	case PLANE2_AOI1:
+		pmfbi = &data->mfb[3];
+		ad->next_ad = 0;
+		if (hw->desc[2] == data->dummy_ad.paddr)
+			wr_reg_wa(&hw->desc[2], ad->paddr);
+		else				/* AOI0 was open */
+			pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
+		break;
+	}
+}
+
+static void fsl_diu_disable_panel(struct fb_info *info)
+{
+	struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
+	struct diu_ad *ad = mfbi->ad;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu __iomem *hw = data->diu_reg;
+
+	switch (mfbi->index) {
+	case PLANE0:
+		wr_reg_wa(&hw->desc[0], 0);
+		break;
+	case PLANE1_AOI0:
+		cmfbi = &data->mfb[2];
+		if (cmfbi->count > 0)	/* AOI1 is open */
+			wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr);
+					/* move AOI1 to the first */
+		else			/* AOI1 was closed */
+			wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr);
+					/* close AOI 0 */
+		break;
+	case PLANE2_AOI0:
+		cmfbi = &data->mfb[4];
+		if (cmfbi->count > 0)	/* AOI1 is open */
+			wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr);
+					/* move AOI1 to the first */
+		else			/* AOI1 was closed */
+			wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr);
+					/* close AOI 0 */
+		break;
+	case PLANE1_AOI1:
+		pmfbi = &data->mfb[1];
+		if (hw->desc[1] != ad->paddr) {
+				/* AOI1 is not the first in the chain */
+			if (pmfbi->count > 0)
+					/* AOI0 is open, must be the first */
+				pmfbi->ad->next_ad = 0;
+		} else			/* AOI1 is the first in the chain */
+			wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr);
+					/* close AOI 1 */
+		break;
+	case PLANE2_AOI1:
+		pmfbi = &data->mfb[3];
+		if (hw->desc[2] != ad->paddr) {
+				/* AOI1 is not the first in the chain */
+			if (pmfbi->count > 0)
+				/* AOI0 is open, must be the first */
+				pmfbi->ad->next_ad = 0;
+		} else		/* AOI1 is the first in the chain */
+			wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr);
+				/* close AOI 1 */
+		break;
+	}
+}
+
+static void enable_lcdc(struct fb_info *info)
+{
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu __iomem *hw = data->diu_reg;
+
+	out_be32(&hw->diu_mode, MFB_MODE1);
+}
+
+static void disable_lcdc(struct fb_info *info)
+{
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu __iomem *hw = data->diu_reg;
+
+	out_be32(&hw->diu_mode, 0);
+}
+
+static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	int available_height, upper_aoi_bottom;
+	enum mfb_index index = mfbi->index;
+	int lower_aoi_is_open, upper_aoi_is_open;
+	__u32 base_plane_width, base_plane_height, upper_aoi_height;
+
+	base_plane_width = data->fsl_diu_info[0].var.xres;
+	base_plane_height = data->fsl_diu_info[0].var.yres;
+
+	if (mfbi->x_aoi_d < 0)
+		mfbi->x_aoi_d = 0;
+	if (mfbi->y_aoi_d < 0)
+		mfbi->y_aoi_d = 0;
+	switch (index) {
+	case PLANE0:
+		if (mfbi->x_aoi_d != 0)
+			mfbi->x_aoi_d = 0;
+		if (mfbi->y_aoi_d != 0)
+			mfbi->y_aoi_d = 0;
+		break;
+	case PLANE1_AOI0:
+	case PLANE2_AOI0:
+		lower_aoi_mfbi = data->fsl_diu_info[index+1].par;
+		lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0;
+		if (var->xres > base_plane_width)
+			var->xres = base_plane_width;
+		if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
+			mfbi->x_aoi_d = base_plane_width - var->xres;
+
+		if (lower_aoi_is_open)
+			available_height = lower_aoi_mfbi->y_aoi_d;
+		else
+			available_height = base_plane_height;
+		if (var->yres > available_height)
+			var->yres = available_height;
+		if ((mfbi->y_aoi_d + var->yres) > available_height)
+			mfbi->y_aoi_d = available_height - var->yres;
+		break;
+	case PLANE1_AOI1:
+	case PLANE2_AOI1:
+		upper_aoi_mfbi = data->fsl_diu_info[index-1].par;
+		upper_aoi_height = data->fsl_diu_info[index-1].var.yres;
+		upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height;
+		upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0;
+		if (var->xres > base_plane_width)
+			var->xres = base_plane_width;
+		if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
+			mfbi->x_aoi_d = base_plane_width - var->xres;
+		if (mfbi->y_aoi_d < 0)
+			mfbi->y_aoi_d = 0;
+		if (upper_aoi_is_open) {
+			if (mfbi->y_aoi_d < upper_aoi_bottom)
+				mfbi->y_aoi_d = upper_aoi_bottom;
+			available_height = base_plane_height
+						- upper_aoi_bottom;
+		} else
+			available_height = base_plane_height;
+		if (var->yres > available_height)
+			var->yres = available_height;
+		if ((mfbi->y_aoi_d + var->yres) > base_plane_height)
+			mfbi->y_aoi_d = base_plane_height - var->yres;
+		break;
+	}
+}
+/*
+ * Checks to see if the hardware supports the state requested by var passed
+ * in. This function does not alter the hardware state! If the var passed in
+ * is slightly off by what the hardware can support then we alter the var
+ * PASSED in to what we can do. If the hardware doesn't support mode change
+ * a -EINVAL will be returned by the upper layers.
+ */
+static int fsl_diu_check_var(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	if (var->xres_virtual < var->xres)
+		var->xres_virtual = var->xres;
+	if (var->yres_virtual < var->yres)
+		var->yres_virtual = var->yres;
+
+	if (var->xoffset + info->var.xres > info->var.xres_virtual)
+		var->xoffset = info->var.xres_virtual - info->var.xres;
+
+	if (var->yoffset + info->var.yres > info->var.yres_virtual)
+		var->yoffset = info->var.yres_virtual - info->var.yres;
+
+	if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+	    (var->bits_per_pixel != 16))
+		var->bits_per_pixel = default_bpp;
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		var->red.length = 5;
+		var->red.offset = 11;
+		var->red.msb_right = 0;
+
+		var->green.length = 6;
+		var->green.offset = 5;
+		var->green.msb_right = 0;
+
+		var->blue.length = 5;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		var->transp.msb_right = 0;
+		break;
+	case 24:
+		var->red.length = 8;
+		var->red.offset = 0;
+		var->red.msb_right = 0;
+
+		var->green.length = 8;
+		var->green.offset = 8;
+		var->green.msb_right = 0;
+
+		var->blue.length = 8;
+		var->blue.offset = 16;
+		var->blue.msb_right = 0;
+
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		var->transp.msb_right = 0;
+		break;
+	case 32:
+		var->red.length = 8;
+		var->red.offset = 16;
+		var->red.msb_right = 0;
+
+		var->green.length = 8;
+		var->green.offset = 8;
+		var->green.msb_right = 0;
+
+		var->blue.length = 8;
+		var->blue.offset = 0;
+		var->blue.msb_right = 0;
+
+		var->transp.length = 8;
+		var->transp.offset = 24;
+		var->transp.msb_right = 0;
+
+		break;
+	}
+
+	var->height = -1;
+	var->width = -1;
+	var->grayscale = 0;
+
+	/* Copy nonstd field to/from sync for fbset usage */
+	var->sync |= var->nonstd;
+	var->nonstd |= var->sync;
+
+	adjust_aoi_size_position(var, info);
+	return 0;
+}
+
+static void set_fix(struct fb_info *info)
+{
+	struct fb_fix_screeninfo *fix = &info->fix;
+	struct fb_var_screeninfo *var = &info->var;
+	struct mfb_info *mfbi = info->par;
+
+	strncpy(fix->id, mfbi->id, sizeof(fix->id));
+	fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+	fix->type = FB_TYPE_PACKED_PIXELS;
+	fix->accel = FB_ACCEL_NONE;
+	fix->visual = FB_VISUAL_TRUECOLOR;
+	fix->xpanstep = 1;
+	fix->ypanstep = 1;
+}
+
+static void update_lcdc(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu __iomem *hw;
+	int i, j;
+	u8 *gamma_table_base;
+
+	u32 temp;
+
+	hw = data->diu_reg;
+
+	if (diu_ops.set_monitor_port)
+		diu_ops.set_monitor_port(data->monitor_port);
+	gamma_table_base = data->gamma;
+
+	/* Prep for DIU init  - gamma table, cursor table */
+
+	for (i = 0; i <= 2; i++)
+		for (j = 0; j <= 255; j++)
+			*gamma_table_base++ = j;
+
+	if (diu_ops.set_gamma_table)
+		diu_ops.set_gamma_table(data->monitor_port, data->gamma);
+
+	disable_lcdc(info);
+
+	/* Program DIU registers */
+
+	out_be32(&hw->gamma, DMA_ADDR(data, gamma));
+
+	out_be32(&hw->bgnd, 0x007F7F7F); /* Set background to grey */
+	out_be32(&hw->disp_size, (var->yres << 16) | var->xres);
+
+	/* Horizontal and vertical configuration register */
+	temp = var->left_margin << 22 | /* BP_H */
+	       var->hsync_len << 11 |   /* PW_H */
+	       var->right_margin;       /* FP_H */
+
+	out_be32(&hw->hsyn_para, temp);
+
+	temp = var->upper_margin << 22 | /* BP_V */
+	       var->vsync_len << 11 |    /* PW_V  */
+	       var->lower_margin;        /* FP_V  */
+
+	out_be32(&hw->vsyn_para, temp);
+
+	diu_ops.set_pixel_clock(var->pixclock);
+
+#ifndef CONFIG_PPC_MPC512x
+	/*
+	 * The PLUT register is defined differently on the MPC5121 than it
+	 * is on other SOCs.  Unfortunately, there's no documentation that
+	 * explains how it's supposed to be programmed, so for now, we leave
+	 * it at the default value on the MPC5121.
+	 *
+	 * For other SOCs, program it for the highest priority, which will
+	 * reduce the chance of underrun. Technically, we should scale the
+	 * priority to match the screen resolution, but doing that properly
+	 * requires delicate fine-tuning for each use-case.
+	 */
+	out_be32(&hw->plut, 0x01F5F666);
+#endif
+
+	/* Enable the DIU */
+	enable_lcdc(info);
+}
+
+static int map_video_memory(struct fb_info *info)
+{
+	u32 smem_len = info->fix.line_length * info->var.yres_virtual;
+	void *p;
+
+	p = alloc_pages_exact(smem_len, GFP_DMA | __GFP_ZERO);
+	if (!p) {
+		dev_err(info->dev, "unable to allocate fb memory\n");
+		return -ENOMEM;
+	}
+	mutex_lock(&info->mm_lock);
+	info->screen_base = p;
+	info->fix.smem_start = virt_to_phys(info->screen_base);
+	info->fix.smem_len = smem_len;
+	mutex_unlock(&info->mm_lock);
+	info->screen_size = info->fix.smem_len;
+
+	return 0;
+}
+
+static void unmap_video_memory(struct fb_info *info)
+{
+	void *p = info->screen_base;
+	size_t l = info->fix.smem_len;
+
+	mutex_lock(&info->mm_lock);
+	info->screen_base = NULL;
+	info->fix.smem_start = 0;
+	info->fix.smem_len = 0;
+	mutex_unlock(&info->mm_lock);
+
+	if (p)
+		free_pages_exact(p, l);
+}
+
+/*
+ * Using the fb_var_screeninfo in fb_info we set the aoi of this
+ * particular framebuffer. It is a light version of fsl_diu_set_par.
+ */
+static int fsl_diu_set_aoi(struct fb_info *info)
+{
+	struct fb_var_screeninfo *var = &info->var;
+	struct mfb_info *mfbi = info->par;
+	struct diu_ad *ad = mfbi->ad;
+
+	/* AOI should not be greater than display size */
+	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+	return 0;
+}
+
+/**
+ * fsl_diu_get_pixel_format: return the pixel format for a given color depth
+ *
+ * The pixel format is a 32-bit value that determine which bits in each
+ * pixel are to be used for each color.  This is the default function used
+ * if the platform does not define its own version.
+ */
+static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel)
+{
+#define PF_BYTE_F		0x10000000
+#define PF_ALPHA_C_MASK		0x0E000000
+#define PF_ALPHA_C_SHIFT	25
+#define PF_BLUE_C_MASK		0x01800000
+#define PF_BLUE_C_SHIFT		23
+#define PF_GREEN_C_MASK		0x00600000
+#define PF_GREEN_C_SHIFT	21
+#define PF_RED_C_MASK		0x00180000
+#define PF_RED_C_SHIFT		19
+#define PF_PALETTE		0x00040000
+#define PF_PIXEL_S_MASK		0x00030000
+#define PF_PIXEL_S_SHIFT	16
+#define PF_COMP_3_MASK		0x0000F000
+#define PF_COMP_3_SHIFT		12
+#define PF_COMP_2_MASK		0x00000F00
+#define PF_COMP_2_SHIFT		8
+#define PF_COMP_1_MASK		0x000000F0
+#define PF_COMP_1_SHIFT		4
+#define PF_COMP_0_MASK		0x0000000F
+#define PF_COMP_0_SHIFT		0
+
+#define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \
+	cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \
+	(blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \
+	(red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \
+	(c2 << PF_COMP_2_SHIFT) | (c1 << PF_COMP_1_SHIFT) | \
+	(c0 << PF_COMP_0_SHIFT) | (size << PF_PIXEL_S_SHIFT))
+
+	switch (bits_per_pixel) {
+	case 32:
+		/* 0x88883316 */
+		return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8);
+	case 24:
+		/* 0x88082219 */
+		return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0);
+	case 16:
+		/* 0x65053118 */
+		return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0);
+	default:
+		pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel);
+		return 0;
+	}
+}
+
+/*
+ * Copies a cursor image from user space to the proper place in driver
+ * memory so that the hardware can display the cursor image.
+ *
+ * Cursor data is represented as a sequence of 'width' bits packed into bytes.
+ * That is, the first 8 bits are in the first byte, the second 8 bits in the
+ * second byte, and so on.  Therefore, the each row of the cursor is (width +
+ * 7) / 8 bytes of 'data'
+ *
+ * The DIU only supports cursors up to 32x32 (MAX_CURS).  We reject cursors
+ * larger than this, so we already know that 'width' <= 32.  Therefore, we can
+ * simplify our code by using a 32-bit big-endian integer ("line") to read in
+ * a single line of pixels, and only look at the top 'width' bits of that
+ * integer.
+ *
+ * This could result in an unaligned 32-bit read.  For example, if the cursor
+ * is 24x24, then the first three bytes of 'image' contain the pixel data for
+ * the top line of the cursor.  We do a 32-bit read of 'image', but we look
+ * only at the top 24 bits.  Then we increment 'image' by 3 bytes.  The next
+ * read is unaligned.  The only problem is that we might read past the end of
+ * 'image' by 1-3 bytes, but that should not cause any problems.
+ */
+static void fsl_diu_load_cursor_image(struct fb_info *info,
+	const void *image, uint16_t bg, uint16_t fg,
+	unsigned int width, unsigned int height)
+{
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	__le16 *cursor = data->cursor;
+	__le16 _fg = cpu_to_le16(fg);
+	__le16 _bg = cpu_to_le16(bg);
+	unsigned int h, w;
+
+	for (h = 0; h < height; h++) {
+		uint32_t mask = 1 << 31;
+		uint32_t line = be32_to_cpup(image);
+
+		for (w = 0; w < width; w++) {
+			cursor[w] = (line & mask) ? _fg : _bg;
+			mask >>= 1;
+		}
+
+		cursor += MAX_CURS;
+		image += DIV_ROUND_UP(width, 8);
+	}
+}
+
+/*
+ * Set a hardware cursor.  The image data for the cursor is passed via the
+ * fb_cursor object.
+ */
+static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu __iomem *hw = data->diu_reg;
+
+	if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS)
+		return -EINVAL;
+
+	/* The cursor size has changed */
+	if (cursor->set & FB_CUR_SETSIZE) {
+		/*
+		 * The DIU cursor is a fixed size, so when we get this
+		 * message, instead of resizing the cursor, we just clear
+		 * all the image data, in expectation of new data.  However,
+		 * in tests this control does not appear to be normally
+		 * called.
+		 */
+		memset(data->cursor, 0, sizeof(data->cursor));
+	}
+
+	/* The cursor position has changed (cursor->image.dx|dy) */
+	if (cursor->set & FB_CUR_SETPOS) {
+		uint32_t xx, yy;
+
+		yy = (cursor->image.dy - info->var.yoffset) & 0x7ff;
+		xx = (cursor->image.dx - info->var.xoffset) & 0x7ff;
+
+		out_be32(&hw->curs_pos, yy << 16 | xx);
+	}
+
+	/*
+	 * FB_CUR_SETIMAGE - the cursor image has changed
+	 * FB_CUR_SETCMAP  - the cursor colors has changed
+	 * FB_CUR_SETSHAPE - the cursor bitmask has changed
+	 */
+	if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETCMAP | FB_CUR_SETIMAGE)) {
+		/*
+		 * Determine the size of the cursor image data.  Normally,
+		 * it's 8x16.
+		 */
+		unsigned int image_size =
+			DIV_ROUND_UP(cursor->image.width, 8) *
+			cursor->image.height;
+		unsigned int image_words =
+			DIV_ROUND_UP(image_size, sizeof(uint32_t));
+		unsigned int bg_idx = cursor->image.bg_color;
+		unsigned int fg_idx = cursor->image.fg_color;
+		uint32_t *image, *source, *mask;
+		uint16_t fg, bg;
+		unsigned int i;
+
+		if (info->state != FBINFO_STATE_RUNNING)
+			return 0;
+
+		bg = ((info->cmap.red[bg_idx] & 0xf8) << 7) |
+		     ((info->cmap.green[bg_idx] & 0xf8) << 2) |
+		     ((info->cmap.blue[bg_idx] & 0xf8) >> 3) |
+		     1 << 15;
+
+		fg = ((info->cmap.red[fg_idx] & 0xf8) << 7) |
+		     ((info->cmap.green[fg_idx] & 0xf8) << 2) |
+		     ((info->cmap.blue[fg_idx] & 0xf8) >> 3) |
+		     1 << 15;
+
+		/* Use 32-bit operations on the data to improve performance */
+		image = (uint32_t *)data->next_cursor;
+		source = (uint32_t *)cursor->image.data;
+		mask = (uint32_t *)cursor->mask;
+
+		if (cursor->rop == ROP_XOR)
+			for (i = 0; i < image_words; i++)
+				image[i] = source[i] ^ mask[i];
+		else
+			for (i = 0; i < image_words; i++)
+				image[i] = source[i] & mask[i];
+
+		fsl_diu_load_cursor_image(info, image, bg, fg,
+			cursor->image.width, cursor->image.height);
+	}
+
+	/*
+	 * Show or hide the cursor.  The cursor data is always stored in the
+	 * 'cursor' memory block, and the actual cursor position is always in
+	 * the DIU's CURS_POS register.  To hide the cursor, we redirect the
+	 * CURSOR register to a blank cursor.  The show the cursor, we
+	 * redirect the CURSOR register to the real cursor data.
+	 */
+	if (cursor->enable)
+		out_be32(&hw->cursor, DMA_ADDR(data, cursor));
+	else
+		out_be32(&hw->cursor, DMA_ADDR(data, blank_cursor));
+
+	return 0;
+}
+
+/*
+ * Using the fb_var_screeninfo in fb_info we set the resolution of this
+ * particular framebuffer. This function alters the fb_fix_screeninfo stored
+ * in fb_info. It does not alter var in fb_info since we are using that
+ * data. This means we depend on the data in var inside fb_info to be
+ * supported by the hardware. fsl_diu_check_var is always called before
+ * fsl_diu_set_par to ensure this.
+ */
+static int fsl_diu_set_par(struct fb_info *info)
+{
+	unsigned long len;
+	struct fb_var_screeninfo *var = &info->var;
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	struct diu_ad *ad = mfbi->ad;
+	struct diu __iomem *hw;
+
+	hw = data->diu_reg;
+
+	set_fix(info);
+
+	len = info->var.yres_virtual * info->fix.line_length;
+	/* Alloc & dealloc each time resolution/bpp change */
+	if (len != info->fix.smem_len) {
+		if (info->fix.smem_start)
+			unmap_video_memory(info);
+
+		/* Memory allocation for framebuffer */
+		if (map_video_memory(info)) {
+			dev_err(info->dev, "unable to allocate fb memory 1\n");
+			return -ENOMEM;
+		}
+	}
+
+	if (diu_ops.get_pixel_format)
+		ad->pix_fmt = diu_ops.get_pixel_format(data->monitor_port,
+						       var->bits_per_pixel);
+	else
+		ad->pix_fmt = fsl_diu_get_pixel_format(var->bits_per_pixel);
+
+	ad->addr    = cpu_to_le32(info->fix.smem_start);
+	ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
+				var->xres_virtual) | mfbi->g_alpha;
+	/* AOI should not be greater than display size */
+	ad->aoi_size 	= cpu_to_le32((var->yres << 16) | var->xres);
+	ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+	ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+
+	/* Disable chroma keying function */
+	ad->ckmax_r = 0;
+	ad->ckmax_g = 0;
+	ad->ckmax_b = 0;
+
+	ad->ckmin_r = 255;
+	ad->ckmin_g = 255;
+	ad->ckmin_b = 255;
+
+	if (mfbi->index == PLANE0)
+		update_lcdc(info);
+	return 0;
+}
+
+static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
+{
+	return ((val << width) + 0x7FFF - val) >> 16;
+}
+
+/*
+ * Set a single color register. The values supplied have a 16 bit magnitude
+ * which needs to be scaled in this function for the hardware. Things to take
+ * into consideration are how many color registers, if any, are supported with
+ * the current color visual. With truecolor mode no color palettes are
+ * supported. Here a pseudo palette is created which we store the value in
+ * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
+ * color palette.
+ */
+static int fsl_diu_setcolreg(unsigned int regno, unsigned int red,
+			     unsigned int green, unsigned int blue,
+			     unsigned int transp, struct fb_info *info)
+{
+	int ret = 1;
+
+	/*
+	 * If greyscale is true, then we convert the RGB value
+	 * to greyscale no matter what visual we are using.
+	 */
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green +
+				      7471 * blue) >> 16;
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		/*
+		 * 16-bit True Colour.  We encode the RGB value
+		 * according to the RGB bitfield information.
+		 */
+		if (regno < 16) {
+			u32 *pal = info->pseudo_palette;
+			u32 v;
+
+			red = CNVT_TOHW(red, info->var.red.length);
+			green = CNVT_TOHW(green, info->var.green.length);
+			blue = CNVT_TOHW(blue, info->var.blue.length);
+			transp = CNVT_TOHW(transp, info->var.transp.length);
+
+			v = (red << info->var.red.offset) |
+			    (green << info->var.green.offset) |
+			    (blue << info->var.blue.offset) |
+			    (transp << info->var.transp.offset);
+
+			pal[regno] = v;
+			ret = 0;
+		}
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Pan (or wrap, depending on the `vmode' field) the display using the
+ * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values
+ * don't fit, return -EINVAL.
+ */
+static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	if ((info->var.xoffset == var->xoffset) &&
+	    (info->var.yoffset == var->yoffset))
+		return 0;	/* No change, do nothing */
+
+	if (var->xoffset + info->var.xres > info->var.xres_virtual
+	    || var->yoffset + info->var.yres > info->var.yres_virtual)
+		return -EINVAL;
+
+	info->var.xoffset = var->xoffset;
+	info->var.yoffset = var->yoffset;
+
+	if (var->vmode & FB_VMODE_YWRAP)
+		info->var.vmode |= FB_VMODE_YWRAP;
+	else
+		info->var.vmode &= ~FB_VMODE_YWRAP;
+
+	fsl_diu_set_aoi(info);
+
+	return 0;
+}
+
+static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
+		       unsigned long arg)
+{
+	struct mfb_info *mfbi = info->par;
+	struct diu_ad *ad = mfbi->ad;
+	struct mfb_chroma_key ck;
+	unsigned char global_alpha;
+	struct aoi_display_offset aoi_d;
+	__u32 pix_fmt;
+	void __user *buf = (void __user *)arg;
+
+	if (!arg)
+		return -EINVAL;
+
+	dev_dbg(info->dev, "ioctl %08x (dir=%s%s type=%u nr=%u size=%u)\n", cmd,
+		_IOC_DIR(cmd) & _IOC_READ ? "R" : "",
+		_IOC_DIR(cmd) & _IOC_WRITE ? "W" : "",
+		_IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd));
+
+	switch (cmd) {
+	case MFB_SET_PIXFMT_OLD:
+		dev_warn(info->dev,
+			 "MFB_SET_PIXFMT value of 0x%08x is deprecated.\n",
+			 MFB_SET_PIXFMT_OLD);
+		fallthrough;
+	case MFB_SET_PIXFMT:
+		if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
+			return -EFAULT;
+		ad->pix_fmt = pix_fmt;
+		break;
+	case MFB_GET_PIXFMT_OLD:
+		dev_warn(info->dev,
+			 "MFB_GET_PIXFMT value of 0x%08x is deprecated.\n",
+			 MFB_GET_PIXFMT_OLD);
+		fallthrough;
+	case MFB_GET_PIXFMT:
+		pix_fmt = ad->pix_fmt;
+		if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
+			return -EFAULT;
+		break;
+	case MFB_SET_AOID:
+		if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
+			return -EFAULT;
+		mfbi->x_aoi_d = aoi_d.x_aoi_d;
+		mfbi->y_aoi_d = aoi_d.y_aoi_d;
+		fsl_diu_check_var(&info->var, info);
+		fsl_diu_set_aoi(info);
+		break;
+	case MFB_GET_AOID:
+		aoi_d.x_aoi_d = mfbi->x_aoi_d;
+		aoi_d.y_aoi_d = mfbi->y_aoi_d;
+		if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
+			return -EFAULT;
+		break;
+	case MFB_GET_ALPHA:
+		global_alpha = mfbi->g_alpha;
+		if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
+			return -EFAULT;
+		break;
+	case MFB_SET_ALPHA:
+		/* set panel information */
+		if (copy_from_user(&global_alpha, buf, sizeof(global_alpha)))
+			return -EFAULT;
+		ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
+							(global_alpha & 0xff);
+		mfbi->g_alpha = global_alpha;
+		break;
+	case MFB_SET_CHROMA_KEY:
+		/* set panel winformation */
+		if (copy_from_user(&ck, buf, sizeof(ck)))
+			return -EFAULT;
+
+		if (ck.enable &&
+		   (ck.red_max < ck.red_min ||
+		    ck.green_max < ck.green_min ||
+		    ck.blue_max < ck.blue_min))
+			return -EINVAL;
+
+		if (!ck.enable) {
+			ad->ckmax_r = 0;
+			ad->ckmax_g = 0;
+			ad->ckmax_b = 0;
+			ad->ckmin_r = 255;
+			ad->ckmin_g = 255;
+			ad->ckmin_b = 255;
+		} else {
+			ad->ckmax_r = ck.red_max;
+			ad->ckmax_g = ck.green_max;
+			ad->ckmax_b = ck.blue_max;
+			ad->ckmin_r = ck.red_min;
+			ad->ckmin_g = ck.green_min;
+			ad->ckmin_b = ck.blue_min;
+		}
+		break;
+#ifdef CONFIG_PPC_MPC512x
+	case MFB_SET_GAMMA: {
+		struct fsl_diu_data *data = mfbi->parent;
+
+		if (copy_from_user(data->gamma, buf, sizeof(data->gamma)))
+			return -EFAULT;
+		setbits32(&data->diu_reg->gamma, 0); /* Force table reload */
+		break;
+	}
+	case MFB_GET_GAMMA: {
+		struct fsl_diu_data *data = mfbi->parent;
+
+		if (copy_to_user(buf, data->gamma, sizeof(data->gamma)))
+			return -EFAULT;
+		break;
+	}
+#endif
+	default:
+		dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd);
+		return -ENOIOCTLCMD;
+	}
+
+	return 0;
+}
+
+static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data)
+{
+	u32 int_mask = INT_UNDRUN; /* enable underrun detection */
+
+	if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE))
+		int_mask |= INT_VSYNC; /* enable vertical sync */
+
+	clrbits32(&data->diu_reg->int_mask, int_mask);
+}
+
+/* turn on fb if count == 1
+ */
+static int fsl_diu_open(struct fb_info *info, int user)
+{
+	struct mfb_info *mfbi = info->par;
+	int res = 0;
+
+	/* free boot splash memory on first /dev/fb0 open */
+	if ((mfbi->index == PLANE0) && diu_ops.release_bootmem)
+		diu_ops.release_bootmem();
+
+	spin_lock(&diu_lock);
+	mfbi->count++;
+	if (mfbi->count == 1) {
+		fsl_diu_check_var(&info->var, info);
+		res = fsl_diu_set_par(info);
+		if (res < 0)
+			mfbi->count--;
+		else {
+			fsl_diu_enable_interrupts(mfbi->parent);
+			fsl_diu_enable_panel(info);
+		}
+	}
+
+	spin_unlock(&diu_lock);
+	return res;
+}
+
+/* turn off fb if count == 0
+ */
+static int fsl_diu_release(struct fb_info *info, int user)
+{
+	struct mfb_info *mfbi = info->par;
+	int res = 0;
+
+	spin_lock(&diu_lock);
+	mfbi->count--;
+	if (mfbi->count == 0) {
+		struct fsl_diu_data *data = mfbi->parent;
+		bool disable = true;
+		int i;
+
+		/* Disable interrupts only if all AOIs are closed */
+		for (i = 0; i < NUM_AOIS; i++) {
+			struct mfb_info *mi = data->fsl_diu_info[i].par;
+
+			if (mi->count)
+				disable = false;
+		}
+		if (disable)
+			out_be32(&data->diu_reg->int_mask, 0xffffffff);
+		fsl_diu_disable_panel(info);
+	}
+
+	spin_unlock(&diu_lock);
+	return res;
+}
+
+static const struct fb_ops fsl_diu_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = fsl_diu_check_var,
+	.fb_set_par = fsl_diu_set_par,
+	.fb_setcolreg = fsl_diu_setcolreg,
+	.fb_pan_display = fsl_diu_pan_display,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_ioctl = fsl_diu_ioctl,
+	.fb_open = fsl_diu_open,
+	.fb_release = fsl_diu_release,
+	.fb_cursor = fsl_diu_cursor,
+};
+
+static int install_fb(struct fb_info *info)
+{
+	int rc;
+	struct mfb_info *mfbi = info->par;
+	struct fsl_diu_data *data = mfbi->parent;
+	const char *aoi_mode, *init_aoi_mode = "320x240";
+	struct fb_videomode *db = fsl_diu_mode_db;
+	unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db);
+	int has_default_mode = 1;
+
+	info->var.activate = FB_ACTIVATE_NOW;
+	info->fbops = &fsl_diu_ops;
+	info->flags = FBINFO_DEFAULT | FBINFO_VIRTFB | FBINFO_PARTIAL_PAN_OK |
+		FBINFO_READS_FAST;
+	info->pseudo_palette = mfbi->pseudo_palette;
+
+	rc = fb_alloc_cmap(&info->cmap, 16, 0);
+	if (rc)
+		return rc;
+
+	if (mfbi->index == PLANE0) {
+		if (data->has_edid) {
+			/* Now build modedb from EDID */
+			fb_edid_to_monspecs(data->edid_data, &info->monspecs);
+			fb_videomode_to_modelist(info->monspecs.modedb,
+						 info->monspecs.modedb_len,
+						 &info->modelist);
+			db = info->monspecs.modedb;
+			dbsize = info->monspecs.modedb_len;
+		}
+		aoi_mode = fb_mode;
+	} else {
+		aoi_mode = init_aoi_mode;
+	}
+	rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL,
+			  default_bpp);
+	if (!rc) {
+		/*
+		 * For plane 0 we continue and look into
+		 * driver's internal modedb.
+		 */
+		if ((mfbi->index == PLANE0) && data->has_edid)
+			has_default_mode = 0;
+		else
+			return -EINVAL;
+	}
+
+	if (!has_default_mode) {
+		rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
+			ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp);
+		if (rc)
+			has_default_mode = 1;
+	}
+
+	/* Still not found, use preferred mode from database if any */
+	if (!has_default_mode && info->monspecs.modedb) {
+		struct fb_monspecs *specs = &info->monspecs;
+		struct fb_videomode *modedb = &specs->modedb[0];
+
+		/*
+		 * Get preferred timing. If not found,
+		 * first mode in database will be used.
+		 */
+		if (specs->misc & FB_MISC_1ST_DETAIL) {
+			int i;
+
+			for (i = 0; i < specs->modedb_len; i++) {
+				if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
+					modedb = &specs->modedb[i];
+					break;
+				}
+			}
+		}
+
+		info->var.bits_per_pixel = default_bpp;
+		fb_videomode_to_var(&info->var, modedb);
+	}
+
+	if (fsl_diu_check_var(&info->var, info)) {
+		dev_err(info->dev, "fsl_diu_check_var failed\n");
+		unmap_video_memory(info);
+		fb_dealloc_cmap(&info->cmap);
+		return -EINVAL;
+	}
+
+	if (register_framebuffer(info) < 0) {
+		dev_err(info->dev, "register_framebuffer failed\n");
+		unmap_video_memory(info);
+		fb_dealloc_cmap(&info->cmap);
+		return -EINVAL;
+	}
+
+	mfbi->registered = 1;
+	dev_info(info->dev, "%s registered successfully\n", mfbi->id);
+
+	return 0;
+}
+
+static void uninstall_fb(struct fb_info *info)
+{
+	struct mfb_info *mfbi = info->par;
+
+	if (!mfbi->registered)
+		return;
+
+	unregister_framebuffer(info);
+	unmap_video_memory(info);
+	fb_dealloc_cmap(&info->cmap);
+
+	mfbi->registered = 0;
+}
+
+static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
+{
+	struct diu __iomem *hw = dev_id;
+	uint32_t status = in_be32(&hw->int_status);
+
+	if (status) {
+		/* This is the workaround for underrun */
+		if (status & INT_UNDRUN) {
+			out_be32(&hw->diu_mode, 0);
+			udelay(1);
+			out_be32(&hw->diu_mode, 1);
+		}
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+		else if (status & INT_VSYNC) {
+			unsigned int i;
+
+			for (i = 0; i < coherence_data_size;
+				i += d_cache_line_size)
+				__asm__ __volatile__ (
+					"dcbz 0, %[input]"
+				::[input]"r"(&coherence_data[i]));
+		}
+#endif
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks. Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state)
+{
+	struct fsl_diu_data *data;
+
+	data = dev_get_drvdata(&ofdev->dev);
+	disable_lcdc(data->fsl_diu_info);
+
+	return 0;
+}
+
+static int fsl_diu_resume(struct platform_device *ofdev)
+{
+	struct fsl_diu_data *data;
+	unsigned int i;
+
+	data = dev_get_drvdata(&ofdev->dev);
+
+	fsl_diu_enable_interrupts(data);
+	update_lcdc(data->fsl_diu_info);
+	for (i = 0; i < NUM_AOIS; i++) {
+		if (data->mfb[i].count)
+			fsl_diu_enable_panel(&data->fsl_diu_info[i]);
+	}
+
+	return 0;
+}
+
+#else
+#define fsl_diu_suspend NULL
+#define fsl_diu_resume NULL
+#endif				/* CONFIG_PM */
+
+static ssize_t store_monitor(struct device *device,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	enum fsl_diu_monitor_port old_monitor_port;
+	struct fsl_diu_data *data =
+		container_of(attr, struct fsl_diu_data, dev_attr);
+
+	old_monitor_port = data->monitor_port;
+	data->monitor_port = fsl_diu_name_to_port(buf);
+
+	if (old_monitor_port != data->monitor_port) {
+		/* All AOIs need adjust pixel format
+		 * fsl_diu_set_par only change the pixsel format here
+		 * unlikely to fail. */
+		unsigned int i;
+
+		for (i=0; i < NUM_AOIS; i++)
+			fsl_diu_set_par(&data->fsl_diu_info[i]);
+	}
+	return count;
+}
+
+static ssize_t show_monitor(struct device *device,
+	struct device_attribute *attr, char *buf)
+{
+	struct fsl_diu_data *data =
+		container_of(attr, struct fsl_diu_data, dev_attr);
+
+	switch (data->monitor_port) {
+	case FSL_DIU_PORT_DVI:
+		return sprintf(buf, "DVI\n");
+	case FSL_DIU_PORT_LVDS:
+		return sprintf(buf, "Single-link LVDS\n");
+	case FSL_DIU_PORT_DLVDS:
+		return sprintf(buf, "Dual-link LVDS\n");
+	}
+
+	return 0;
+}
+
+static int fsl_diu_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mfb_info *mfbi;
+	struct fsl_diu_data *data;
+	dma_addr_t dma_addr; /* DMA addr of fsl_diu_data struct */
+	const void *prop;
+	unsigned int i;
+	int ret;
+
+	data = dmam_alloc_coherent(&pdev->dev, sizeof(struct fsl_diu_data),
+				   &dma_addr, GFP_DMA | __GFP_ZERO);
+	if (!data)
+		return -ENOMEM;
+	data->dma_addr = dma_addr;
+
+	/*
+	 * dma_alloc_coherent() uses a page allocator, so the address is
+	 * always page-aligned.  We need the memory to be 32-byte aligned,
+	 * so that's good.  However, if one day the allocator changes, we
+	 * need to catch that.  It's not worth the effort to handle unaligned
+	 * alloctions now because it's highly unlikely to ever be a problem.
+	 */
+	if ((unsigned long)data & 31) {
+		dev_err(&pdev->dev, "misaligned allocation");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	spin_lock_init(&data->reg_lock);
+
+	for (i = 0; i < NUM_AOIS; i++) {
+		struct fb_info *info = &data->fsl_diu_info[i];
+
+		info->device = &pdev->dev;
+		info->par = &data->mfb[i];
+
+		/*
+		 * We store the physical address of the AD in the reserved
+		 * 'paddr' field of the AD itself.
+		 */
+		data->ad[i].paddr = DMA_ADDR(data, ad[i]);
+
+		info->fix.smem_start = 0;
+
+		/* Initialize the AOI data structure */
+		mfbi = info->par;
+		memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
+		mfbi->parent = data;
+		mfbi->ad = &data->ad[i];
+	}
+
+	/* Get the EDID data from the device tree, if present */
+	prop = of_get_property(np, "edid", &ret);
+	if (prop && ret == EDID_LENGTH) {
+		memcpy(data->edid_data, prop, EDID_LENGTH);
+		data->has_edid = true;
+	}
+
+	data->diu_reg = of_iomap(np, 0);
+	if (!data->diu_reg) {
+		dev_err(&pdev->dev, "cannot map DIU registers\n");
+		ret = -EFAULT;
+		goto error;
+	}
+
+	/* Get the IRQ of the DIU */
+	data->irq = irq_of_parse_and_map(np, 0);
+
+	if (!data->irq) {
+		dev_err(&pdev->dev, "could not get DIU IRQ\n");
+		ret = -EINVAL;
+		goto error;
+	}
+	data->monitor_port = monitor_port;
+
+	/* Initialize the dummy Area Descriptor */
+	data->dummy_ad.addr = cpu_to_le32(DMA_ADDR(data, dummy_aoi));
+	data->dummy_ad.pix_fmt = 0x88882317;
+	data->dummy_ad.src_size_g_alpha = cpu_to_le32((4 << 12) | 4);
+	data->dummy_ad.aoi_size = cpu_to_le32((4 << 16) |  2);
+	data->dummy_ad.offset_xyi = 0;
+	data->dummy_ad.offset_xyd = 0;
+	data->dummy_ad.next_ad = 0;
+	data->dummy_ad.paddr = DMA_ADDR(data, dummy_ad);
+
+	/*
+	 * Let DIU continue to display splash screen if it was pre-initialized
+	 * by the bootloader; otherwise, clear the display.
+	 */
+	if (in_be32(&data->diu_reg->diu_mode) == MFB_MODE0)
+		out_be32(&data->diu_reg->desc[0], 0);
+
+	out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr);
+	out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr);
+
+	/*
+	 * Older versions of U-Boot leave interrupts enabled, so disable
+	 * all of them and clear the status register.
+	 */
+	out_be32(&data->diu_reg->int_mask, 0xffffffff);
+	in_be32(&data->diu_reg->int_status);
+
+	ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb",
+			  data->diu_reg);
+	if (ret) {
+		dev_err(&pdev->dev, "could not claim irq\n");
+		goto error;
+	}
+
+	for (i = 0; i < NUM_AOIS; i++) {
+		ret = install_fb(&data->fsl_diu_info[i]);
+		if (ret) {
+			dev_err(&pdev->dev, "could not register fb %d\n", i);
+			free_irq(data->irq, data->diu_reg);
+			goto error;
+		}
+	}
+
+	sysfs_attr_init(&data->dev_attr.attr);
+	data->dev_attr.attr.name = "monitor";
+	data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
+	data->dev_attr.show = show_monitor;
+	data->dev_attr.store = store_monitor;
+	ret = device_create_file(&pdev->dev, &data->dev_attr);
+	if (ret) {
+		dev_err(&pdev->dev, "could not create sysfs file %s\n",
+			data->dev_attr.attr.name);
+	}
+
+	dev_set_drvdata(&pdev->dev, data);
+	return 0;
+
+error:
+	for (i = 0; i < NUM_AOIS; i++)
+		uninstall_fb(&data->fsl_diu_info[i]);
+
+	iounmap(data->diu_reg);
+
+	return ret;
+}
+
+static int fsl_diu_remove(struct platform_device *pdev)
+{
+	struct fsl_diu_data *data;
+	int i;
+
+	data = dev_get_drvdata(&pdev->dev);
+	disable_lcdc(&data->fsl_diu_info[0]);
+
+	free_irq(data->irq, data->diu_reg);
+
+	for (i = 0; i < NUM_AOIS; i++)
+		uninstall_fb(&data->fsl_diu_info[i]);
+
+	iounmap(data->diu_reg);
+
+	return 0;
+}
+
+#ifndef MODULE
+static int __init fsl_diu_setup(char *options)
+{
+	char *opt;
+	unsigned long val;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((opt = strsep(&options, ",")) != NULL) {
+		if (!*opt)
+			continue;
+		if (!strncmp(opt, "monitor=", 8)) {
+			monitor_port = fsl_diu_name_to_port(opt + 8);
+		} else if (!strncmp(opt, "bpp=", 4)) {
+			if (!kstrtoul(opt + 4, 10, &val))
+				default_bpp = val;
+		} else
+			fb_mode = opt;
+	}
+
+	return 0;
+}
+#endif
+
+static const struct of_device_id fsl_diu_match[] = {
+#ifdef CONFIG_PPC_MPC512x
+	{
+		.compatible = "fsl,mpc5121-diu",
+	},
+#endif
+	{
+		.compatible = "fsl,diu",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, fsl_diu_match);
+
+static struct platform_driver fsl_diu_driver = {
+	.driver = {
+		.name = "fsl-diu-fb",
+		.of_match_table = fsl_diu_match,
+	},
+	.probe  	= fsl_diu_probe,
+	.remove 	= fsl_diu_remove,
+	.suspend	= fsl_diu_suspend,
+	.resume		= fsl_diu_resume,
+};
+
+static int __init fsl_diu_init(void)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	struct device_node *np;
+	const u32 *prop;
+#endif
+	int ret;
+#ifndef MODULE
+	char *option;
+
+	/*
+	 * For kernel boot options (in 'video=xxxfb:<options>' format)
+	 */
+	if (fb_get_options("fslfb", &option))
+		return -ENODEV;
+	fsl_diu_setup(option);
+#else
+	monitor_port = fsl_diu_name_to_port(monitor_string);
+#endif
+
+	/*
+	 * Must to verify set_pixel_clock. If not implement on platform,
+	 * then that means that there is no platform support for the DIU.
+	 */
+	if (!diu_ops.set_pixel_clock)
+		return -ENODEV;
+
+	pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n");
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	np = of_get_cpu_node(0, NULL);
+	if (!np) {
+		pr_err("fsl-diu-fb: can't find 'cpu' device node\n");
+		return -ENODEV;
+	}
+
+	prop = of_get_property(np, "d-cache-size", NULL);
+	if (prop == NULL) {
+		pr_err("fsl-diu-fb: missing 'd-cache-size' property' "
+		       "in 'cpu' node\n");
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	/*
+	 * Freescale PLRU requires 13/8 times the cache size to do a proper
+	 * displacement flush
+	 */
+	coherence_data_size = be32_to_cpup(prop) * 13;
+	coherence_data_size /= 8;
+
+	pr_debug("fsl-diu-fb: coherence data size is %zu bytes\n",
+		 coherence_data_size);
+
+	prop = of_get_property(np, "d-cache-line-size", NULL);
+	if (prop == NULL) {
+		pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' "
+		       "in 'cpu' node\n");
+		of_node_put(np);
+		return -ENODEV;
+	}
+	d_cache_line_size = be32_to_cpup(prop);
+
+	pr_debug("fsl-diu-fb: cache lines size is %u bytes\n",
+		 d_cache_line_size);
+
+	of_node_put(np);
+	coherence_data = vmalloc(coherence_data_size);
+	if (!coherence_data)
+		return -ENOMEM;
+#endif
+
+	ret = platform_driver_register(&fsl_diu_driver);
+	if (ret) {
+		pr_err("fsl-diu-fb: failed to register platform driver\n");
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+		vfree(coherence_data);
+#endif
+	}
+	return ret;
+}
+
+static void __exit fsl_diu_exit(void)
+{
+	platform_driver_unregister(&fsl_diu_driver);
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+	vfree(coherence_data);
+#endif
+}
+
+module_init(fsl_diu_init);
+module_exit(fsl_diu_exit);
+
+MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
+MODULE_DESCRIPTION("Freescale DIU framebuffer driver");
+MODULE_LICENSE("GPL");
+
+module_param_named(mode, fb_mode, charp, 0);
+MODULE_PARM_DESC(mode,
+	"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+module_param_named(bpp, default_bpp, ulong, 0);
+MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'");
+module_param_named(monitor, monitor_string, charp, 0);
+MODULE_PARM_DESC(monitor, "Specify the monitor port "
+	"(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform");
+