Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 650 insertions, 0 deletions

diff --git a/drivers/visorbus/controlvmchannel.h b/drivers/visorbus/controlvmchannel.h
new file mode 100644
index 000000000..c87213554
--- /dev/null
+++ b/drivers/visorbus/controlvmchannel.h
@@ -0,0 +1,650 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2010 - 2015 UNISYS CORPORATION
+ * All rights reserved.
+ */
+
+#ifndef __CONTROLVMCHANNEL_H__
+#define __CONTROLVMCHANNEL_H__
+
+#include <linux/uuid.h>
+#include <linux/visorbus.h>
+
+/* {2B3C2D10-7EF5-4ad8-B966-3448B7386B3D} */
+#define VISOR_CONTROLVM_CHANNEL_GUID \
+	GUID_INIT(0x2b3c2d10, 0x7ef5, 0x4ad8, \
+		  0xb9, 0x66, 0x34, 0x48, 0xb7, 0x38, 0x6b, 0x3d)
+
+#define CONTROLVM_MESSAGE_MAX 64
+
+/*
+ * Must increment this whenever you insert or delete fields within this channel
+ * struct.  Also increment whenever you change the meaning of fields within this
+ * channel struct so as to break pre-existing software. Note that you can
+ * usually add fields to the END of the channel struct withOUT needing to
+ * increment this.
+ */
+#define VISOR_CONTROLVM_CHANNEL_VERSIONID 1
+
+/* Defines for various channel queues */
+#define CONTROLVM_QUEUE_REQUEST		0
+#define CONTROLVM_QUEUE_RESPONSE	1
+#define CONTROLVM_QUEUE_EVENT		2
+#define CONTROLVM_QUEUE_ACK		3
+
+/* Max num of messages stored during IOVM creation to be reused after crash */
+#define CONTROLVM_CRASHMSG_MAX 2
+
+/*
+ * struct visor_segment_state
+ * @enabled:   May enter other states.
+ * @active:    Assigned to active partition.
+ * @alive:     Configure message sent to service/server.
+ * @revoked:   Similar to partition state ShuttingDown.
+ * @allocated: Memory (device/port number) has been selected by Command.
+ * @known:     Has been introduced to the service/guest partition.
+ * @ready:     Service/Guest partition has responded to introduction.
+ * @operating: Resource is configured and operating.
+ * @reserved:  Natural alignment.
+ *
+ * Note: Don't use high bit unless we need to switch to ushort which is
+ * non-compliant.
+ */
+struct visor_segment_state  {
+	u16 enabled:1;
+	u16 active:1;
+	u16 alive:1;
+	u16 revoked:1;
+	u16 allocated:1;
+	u16 known:1;
+	u16 ready:1;
+	u16 operating:1;
+	u16 reserved:8;
+} __packed;
+
+static const struct visor_segment_state segment_state_running = {
+	1, 1, 1, 0, 1, 1, 1, 1
+};
+
+static const struct visor_segment_state segment_state_paused = {
+	1, 1, 1, 0, 1, 1, 1, 0
+};
+
+static const struct visor_segment_state segment_state_standby = {
+	1, 1, 0, 0, 1, 1, 1, 0
+};
+
+/*
+ * enum controlvm_id
+ * @CONTROLVM_INVALID:
+ * @CONTROLVM_BUS_CREATE:		CP --> SP, GP.
+ * @CONTROLVM_BUS_DESTROY:		CP --> SP, GP.
+ * @CONTROLVM_BUS_CONFIGURE:		CP --> SP.
+ * @CONTROLVM_BUS_CHANGESTATE:		CP --> SP, GP.
+ * @CONTROLVM_BUS_CHANGESTATE_EVENT:	SP, GP --> CP.
+ * @CONTROLVM_DEVICE_CREATE:		CP --> SP, GP.
+ * @CONTROLVM_DEVICE_DESTROY:		CP --> SP, GP.
+ * @CONTROLVM_DEVICE_CONFIGURE:		CP --> SP.
+ * @CONTROLVM_DEVICE_CHANGESTATE:	CP --> SP, GP.
+ * @CONTROLVM_DEVICE_CHANGESTATE_EVENT:	SP, GP --> CP.
+ * @CONTROLVM_DEVICE_RECONFIGURE:	CP --> Boot.
+ * @CONTROLVM_CHIPSET_INIT:		CP --> SP, GP.
+ * @CONTROLVM_CHIPSET_STOP:		CP --> SP, GP.
+ * @CONTROLVM_CHIPSET_READY:		CP --> SP.
+ * @CONTROLVM_CHIPSET_SELFTEST:		CP --> SP.
+ *
+ * Ids for commands that may appear in either queue of a ControlVm channel.
+ *
+ * Commands that are initiated by the command partition (CP), by an IO or
+ * console service partition (SP), or by a guest partition (GP) are:
+ * - issued on the RequestQueue queue (q #0) in the ControlVm channel
+ * - responded to on the ResponseQueue queue (q #1) in the ControlVm channel
+ *
+ * Events that are initiated by an IO or console service partition (SP) or
+ * by a guest partition (GP) are:
+ * - issued on the EventQueue queue (q #2) in the ControlVm channel
+ * - responded to on the EventAckQueue queue (q #3) in the ControlVm channel
+ */
+enum controlvm_id {
+	CONTROLVM_INVALID = 0,
+	/*
+	 * SWITCH commands required Parameter: SwitchNumber.
+	 * BUS commands required Parameter: BusNumber
+	 */
+	CONTROLVM_BUS_CREATE = 0x101,
+	CONTROLVM_BUS_DESTROY = 0x102,
+	CONTROLVM_BUS_CONFIGURE = 0x104,
+	CONTROLVM_BUS_CHANGESTATE = 0x105,
+	CONTROLVM_BUS_CHANGESTATE_EVENT = 0x106,
+	/* DEVICE commands required Parameter: BusNumber, DeviceNumber */
+	CONTROLVM_DEVICE_CREATE = 0x201,
+	CONTROLVM_DEVICE_DESTROY = 0x202,
+	CONTROLVM_DEVICE_CONFIGURE = 0x203,
+	CONTROLVM_DEVICE_CHANGESTATE = 0x204,
+	CONTROLVM_DEVICE_CHANGESTATE_EVENT = 0x205,
+	CONTROLVM_DEVICE_RECONFIGURE = 0x206,
+	/* CHIPSET commands */
+	CONTROLVM_CHIPSET_INIT = 0x301,
+	CONTROLVM_CHIPSET_STOP = 0x302,
+	CONTROLVM_CHIPSET_READY = 0x304,
+	CONTROLVM_CHIPSET_SELFTEST = 0x305,
+};
+
+/*
+ * struct irq_info
+ * @reserved1:	     Natural alignment purposes
+ * @recv_irq_handle: Specifies interrupt handle. It is used to retrieve the
+ *		     corresponding interrupt pin from Monitor; and the interrupt
+ *		     pin is used to connect to the corresponding interrupt.
+ *		     Used by IOPart-GP only.
+ * @recv_irq_vector: Specifies interrupt vector. It, interrupt pin, and shared
+ *		     are used to connect to the corresponding interrupt.
+ *		     Used by IOPart-GP only.
+ * @recv_irq_shared: Specifies if the recvInterrupt is shared.  It, interrupt
+ *		     pin and vector are used to connect to 0 = not shared;
+ *		     1 = shared the corresponding interrupt.
+ *		     Used by IOPart-GP only.
+ * @reserved:	     Natural alignment purposes
+ */
+struct irq_info {
+	u64 reserved1;
+	u64 recv_irq_handle;
+	u32 recv_irq_vector;
+	u8 recv_irq_shared;
+	u8 reserved[3];
+} __packed;
+
+/*
+ * struct efi_visor_indication
+ * @boot_to_fw_ui: Stop in UEFI UI
+ * @clear_nvram:   Clear NVRAM
+ * @clear_cmos:	   Clear CMOS
+ * @boot_to_tool:  Run install tool
+ * @reserved:	   Natural alignment
+ */
+struct efi_visor_indication  {
+	u64 boot_to_fw_ui:1;
+	u64 clear_nvram:1;
+	u64 clear_cmos:1;
+	u64 boot_to_tool:1;
+	/* Remaining bits are available */
+	u64 reserved:60;
+} __packed;
+
+enum visor_chipset_feature {
+	VISOR_CHIPSET_FEATURE_REPLY = 0x00000001,
+	VISOR_CHIPSET_FEATURE_PARA_HOTPLUG = 0x00000002,
+};
+
+/*
+ * struct controlvm_message_header
+ * @id:		       See CONTROLVM_ID.
+ * @message_size:      Includes size of this struct + size of message.
+ * @segment_index:     Index of segment containing Vm message/information.
+ * @completion_status: Error status code or result of  message completion.
+ * @struct flags:
+ *	@failed:	     =1 in a response to signify failure.
+ *	@response_expected:  =1 in all messages that expect a response.
+ *	@server:	     =1 in all bus & device-related messages where the
+ *			     message receiver is to act as the bus or device
+ *			     server.
+ *	@test_message:	     =1 for testing use only (Control and Command
+ *			     ignore this).
+ *	@partial_completion: =1 if there are forthcoming responses/acks
+ *                           associated with this message.
+ *      @preserve:	     =1 this is to let us know to preserve channel
+ *			     contents.
+ *	@writer_in_diag:     =1 the DiagWriter is active in the Diagnostic
+ *			     Partition.
+ *	@reserve:	     Natural alignment.
+ * @reserved:	       Natural alignment.
+ * @message_handle:    Identifies the particular message instance.
+ * @payload_vm_offset: Offset of payload area from start of this instance.
+ * @payload_max_bytes: Maximum bytes allocated in payload area of ControlVm
+ *		       segment.
+ * @payload_bytes:     Actual number of bytes of payload area to copy between
+ *		       IO/Command. If non-zero, there is a payload to copy.
+ *
+ * This is the common structure that is at the beginning of every
+ * ControlVm message (both commands and responses) in any ControlVm
+ * queue.  Commands are easily distinguished from responses by
+ * looking at the flags.response field.
+ */
+struct controlvm_message_header  {
+	u32 id;
+	/*
+	 * For requests, indicates the message type. For responses, indicates
+	 * the type of message we are responding to.
+	 */
+	u32 message_size;
+	u32 segment_index;
+	u32 completion_status;
+	struct  {
+		u32 failed:1;
+		u32 response_expected:1;
+		u32 server:1;
+		u32 test_message:1;
+		u32 partial_completion:1;
+		u32 preserve:1;
+		u32 writer_in_diag:1;
+		u32 reserve:25;
+	} __packed flags;
+	u32 reserved;
+	u64 message_handle;
+	u64 payload_vm_offset;
+	u32 payload_max_bytes;
+	u32 payload_bytes;
+} __packed;
+
+/*
+ * struct controlvm_packet_device_create - For CONTROLVM_DEVICE_CREATE
+ * @bus_no:	    Bus # (0..n-1) from the msg receiver's end.
+ * @dev_no:	    Bus-relative (0..n-1) device number.
+ * @channel_addr:   Guest physical address of the channel, which can be
+ *		    dereferenced by the receiver of this ControlVm command.
+ * @channel_bytes:  Specifies size of the channel in bytes.
+ * @data_type_uuid: Specifies format of data in channel.
+ * @dev_inst_uuid:  Instance guid for the device.
+ * @irq_info intr:  Specifies interrupt information.
+ */
+struct controlvm_packet_device_create  {
+	u32 bus_no;
+	u32 dev_no;
+	u64 channel_addr;
+	u64 channel_bytes;
+	guid_t data_type_guid;
+	guid_t dev_inst_guid;
+	struct irq_info intr;
+} __packed;
+
+/*
+ * struct controlvm_packet_device_configure - For CONTROLVM_DEVICE_CONFIGURE
+ * @bus_no: Bus number (0..n-1) from the msg receiver's perspective.
+ * @dev_no: Bus-relative (0..n-1) device number.
+ */
+struct controlvm_packet_device_configure  {
+	u32 bus_no;
+	u32 dev_no;
+} __packed;
+
+/* Total 128 bytes */
+struct controlvm_message_device_create {
+	struct controlvm_message_header header;
+	struct controlvm_packet_device_create packet;
+} __packed;
+
+/* Total 56 bytes */
+struct controlvm_message_device_configure  {
+	struct controlvm_message_header header;
+	struct controlvm_packet_device_configure packet;
+} __packed;
+
+/*
+ * struct controlvm_message_packet - This is the format for a message in any
+ *                                   ControlVm queue.
+ * @struct create_bus:		For CONTROLVM_BUS_CREATE.
+ *	@bus_no:	     Bus # (0..n-1) from the msg receiver's perspective.
+ *	@dev_count:	     Indicates the max number of devices on this bus.
+ *	@channel_addr:	     Guest physical address of the channel, which can be
+ *			     dereferenced by the receiver of this ControlVM
+ *			     command.
+ *	@channel_bytes:	     Size of the channel.
+ *	@bus_data_type_uuid: Indicates format of data in bus channel.
+ *	@bus_inst_uuid:	     Instance uuid for the bus.
+ *
+ * @struct destroy_bus:		For CONTROLVM_BUS_DESTROY.
+ *	@bus_no: Bus # (0..n-1) from the msg receiver's perspective.
+ *	@reserved: Natural alignment purposes.
+ *
+ * @struct configure_bus:	For CONTROLVM_BUS_CONFIGURE.
+ *	@bus_no:	      Bus # (0..n-1) from the receiver's perspective.
+ *	@reserved1:	      For alignment purposes.
+ *	@guest_handle:	      This is used to convert guest physical address to
+ *			      physical address.
+ *	@recv_bus_irq_handle: Specifies interrupt info. It is used by SP to
+ *			      register to receive interrupts from the CP. This
+ *			      interrupt is used for bus level notifications.
+ *			      The corresponding sendBusInterruptHandle is kept
+ *			      in CP.
+ *
+ * @struct create_device:	For CONTROLVM_DEVICE_CREATE.
+ *
+ * @struct destroy_device:	For CONTROLVM_DEVICE_DESTROY.
+ *	@bus_no: Bus # (0..n-1) from the msg receiver's perspective.
+ *	@dev_no: Bus-relative (0..n-1) device number.
+ *
+ * @struct configure_device:	For CONTROLVM_DEVICE_CONFIGURE.
+ *
+ * @struct reconfigure_device:	For CONTROLVM_DEVICE_RECONFIGURE.
+ *	@bus_no: Bus # (0..n-1) from the msg receiver's perspective.
+ *	@dev_no: Bus-relative (0..n-1) device number.
+ *
+ * @struct bus_change_state:	For CONTROLVM_BUS_CHANGESTATE.
+ *	@bus_no:
+ *	@struct state:
+ *	@reserved: Natural alignment purposes.
+ *
+ * @struct device_change_state:	For CONTROLVM_DEVICE_CHANGESTATE.
+ *	@bus_no:
+ *	@dev_no:
+ *	@struct state:
+ *	@struct flags:
+ *		@phys_device: =1 if message is for a physical device.
+ *		@reserved:    Natural alignment.
+ *		@reserved1:   Natural alignment.
+ *	@reserved:    Natural alignment purposes.
+ *
+ * @struct device_change_state_event:	For CONTROLVM_DEVICE_CHANGESTATE_EVENT.
+ *	@bus_no:
+ *	@dev_no:
+ *	@struct state:
+ *	@reserved:     Natural alignment purposes.
+ *
+ * @struct init_chipset:	For CONTROLVM_CHIPSET_INIT.
+ *	@bus_count:	  Indicates the max number of busses.
+ *	@switch_count:    Indicates the max number of switches.
+ *	@enum features:
+ *	@platform_number:
+ *
+ * @struct chipset_selftest:	For CONTROLVM_CHIPSET_SELFTEST.
+ *      @options: Reserved.
+ *      @test:	  Bit 0 set to run embedded selftest.
+ *
+ * @addr:   A physical address of something, that can be dereferenced by the
+ *	    receiver of this ControlVm command.
+ *
+ * @handle: A handle of something (depends on command id).
+ */
+struct controlvm_message_packet  {
+	union  {
+		struct  {
+			u32 bus_no;
+			u32 dev_count;
+			u64 channel_addr;
+			u64 channel_bytes;
+			guid_t bus_data_type_guid;
+			guid_t bus_inst_guid;
+		} __packed create_bus;
+		struct  {
+			u32 bus_no;
+			u32 reserved;
+		} __packed destroy_bus;
+		struct  {
+			u32 bus_no;
+			u32 reserved1;
+			u64 guest_handle;
+			u64 recv_bus_irq_handle;
+		} __packed configure_bus;
+		struct controlvm_packet_device_create create_device;
+		struct  {
+			u32 bus_no;
+			u32 dev_no;
+		} __packed destroy_device;
+		struct controlvm_packet_device_configure configure_device;
+		struct  {
+			u32 bus_no;
+			u32 dev_no;
+		} __packed reconfigure_device;
+		struct  {
+			u32 bus_no;
+			struct visor_segment_state state;
+			u8 reserved[2];
+		} __packed bus_change_state;
+		struct  {
+			u32 bus_no;
+			u32 dev_no;
+			struct visor_segment_state state;
+			struct  {
+				u32 phys_device:1;
+				u32 reserved:31;
+				u32 reserved1;
+			} __packed flags;
+			u8 reserved[2];
+		} __packed device_change_state;
+		struct  {
+			u32 bus_no;
+			u32 dev_no;
+			struct visor_segment_state state;
+			u8 reserved[6];
+		} __packed device_change_state_event;
+		struct  {
+			u32 bus_count;
+			u32 switch_count;
+			enum visor_chipset_feature features;
+			u32 platform_number;
+		} __packed init_chipset;
+		struct  {
+			u32 options;
+			u32 test;
+		} __packed chipset_selftest;
+		u64 addr;
+		u64 handle;
+	};
+} __packed;
+
+/* All messages in any ControlVm queue have this layout. */
+struct controlvm_message {
+	struct controlvm_message_header hdr;
+	struct controlvm_message_packet cmd;
+} __packed;
+
+/*
+ * struct visor_controlvm_channel
+ * @struct header:
+ * @gp_controlvm:			Guest phys addr of this channel.
+ * @gp_partition_tables:		Guest phys addr of partition tables.
+ * @gp_diag_guest:			Guest phys addr of diagnostic channel.
+ * @gp_boot_romdisk:			Guest phys addr of (read* only) Boot
+ *					ROM disk.
+ * @gp_boot_ramdisk:			Guest phys addr of writable Boot RAM
+ *					disk.
+ * @gp_acpi_table:			Guest phys addr of acpi table.
+ * @gp_control_channel:			Guest phys addr of control channel.
+ * @gp_diag_romdisk:			Guest phys addr of diagnostic ROM disk.
+ * @gp_nvram:				Guest phys addr of NVRAM channel.
+ * @request_payload_offset:		Offset to request payload area.
+ * @event_payload_offset:		Offset to event payload area.
+ * @request_payload_bytes:		Bytes available in request payload area.
+ * @event_payload_bytes:		Bytes available in event payload area.
+ * @control_channel_bytes:
+ * @nvram_channel_bytes:		Bytes in PartitionNvram segment.
+ * @message_bytes:			sizeof(CONTROLVM_MESSAGE).
+ * @message_count:			CONTROLVM_MESSAGE_MAX.
+ * @gp_smbios_table:			Guest phys addr of SMBIOS tables.
+ * @gp_physical_smbios_table:		Guest phys addr of SMBIOS table.
+ * @gp_reserved:			VISOR_MAX_GUESTS_PER_SERVICE.
+ * @virtual_guest_firmware_image_base:	Guest physical address of EFI firmware
+ *					image base.
+ * @virtual_guest_firmware_entry_point:	Guest physical address of EFI firmware
+ *					entry point.
+ * @virtual_guest_firmware_image_size:	Guest EFI firmware image size.
+ * @virtual_guest_firmware_boot_base:	GPA = 1MB where EFI firmware image is
+ *					copied to.
+ * @virtual_guest_image_base:
+ * @virtual_guest_image_size:
+ * @prototype_control_channel_offset:
+ * @virtual_guest_partition_handle:
+ * @restore_action:			Restore Action field to restore the
+ *					guest partition.
+ * @dump_action:			For Windows guests it shows if the
+ *					visordisk is in dump mode.
+ * @nvram_fail_count:
+ * @saved_crash_message_count:		= CONTROLVM_CRASHMSG_MAX.
+ * @saved_crash_message_offset:		Offset to request payload area needed
+ *					for crash dump.
+ * @installation_error:			Type of error encountered during
+ *					installation.
+ * @installation_text_id:		Id of string to display.
+ * @installation_remaining_steps:	Number of remaining installation steps
+ *					(for progress bars).
+ * @tool_action:			VISOR_TOOL_ACTIONS Installation Action
+ *					field.
+ * @reserved: Alignment.
+ * @struct efi_visor_ind:
+ * @sp_reserved:
+ * @reserved2:				Force signals to begin on 128-byte
+ *					cache line.
+ * @struct request_queue:		Guest partition uses this queue to send
+ *					requests to Control.
+ * @struct response_queue:		Control uses this queue to respond to
+ *					service or guest partition request.
+ * @struct event_queue:			Control uses this queue to send events
+ *					to guest partition.
+ * @struct event_ack_queue:		Service or guest partition uses this
+ *					queue to ack Control events.
+ * @struct request_msg:			Request fixed-size message pool -
+ *					does not include payload.
+ * @struct response_msg:		Response fixed-size message pool -
+ *					does not include payload.
+ * @struct event_msg:			Event fixed-size message pool -
+ *					does not include payload.
+ * @struct event_ack_msg:		Ack fixed-size message pool -
+ *					does not include payload.
+ * @struct saved_crash_msg:		Message stored during IOVM creation to
+ *					be reused after crash.
+ */
+struct visor_controlvm_channel {
+	struct channel_header header;
+	u64 gp_controlvm;
+	u64 gp_partition_tables;
+	u64 gp_diag_guest;
+	u64 gp_boot_romdisk;
+	u64 gp_boot_ramdisk;
+	u64 gp_acpi_table;
+	u64 gp_control_channel;
+	u64 gp_diag_romdisk;
+	u64 gp_nvram;
+	u64 request_payload_offset;
+	u64 event_payload_offset;
+	u32 request_payload_bytes;
+	u32 event_payload_bytes;
+	u32 control_channel_bytes;
+	u32 nvram_channel_bytes;
+	u32 message_bytes;
+	u32 message_count;
+	u64 gp_smbios_table;
+	u64 gp_physical_smbios_table;
+	char gp_reserved[2688];
+	u64 virtual_guest_firmware_image_base;
+	u64 virtual_guest_firmware_entry_point;
+	u64 virtual_guest_firmware_image_size;
+	u64 virtual_guest_firmware_boot_base;
+	u64 virtual_guest_image_base;
+	u64 virtual_guest_image_size;
+	u64 prototype_control_channel_offset;
+	u64 virtual_guest_partition_handle;
+	u16 restore_action;
+	u16 dump_action;
+	u16 nvram_fail_count;
+	u16 saved_crash_message_count;
+	u32 saved_crash_message_offset;
+	u32 installation_error;
+	u32 installation_text_id;
+	u16 installation_remaining_steps;
+	u8 tool_action;
+	u8 reserved;
+	struct efi_visor_indication efi_visor_ind;
+	u32 sp_reserved;
+	u8 reserved2[28];
+	struct signal_queue_header request_queue;
+	struct signal_queue_header response_queue;
+	struct signal_queue_header event_queue;
+	struct signal_queue_header event_ack_queue;
+	struct controlvm_message request_msg[CONTROLVM_MESSAGE_MAX];
+	struct controlvm_message response_msg[CONTROLVM_MESSAGE_MAX];
+	struct controlvm_message event_msg[CONTROLVM_MESSAGE_MAX];
+	struct controlvm_message event_ack_msg[CONTROLVM_MESSAGE_MAX];
+	struct controlvm_message saved_crash_msg[CONTROLVM_CRASHMSG_MAX];
+} __packed;
+
+/*
+ * struct visor_controlvm_parameters_header
+ *
+ * The following header will be located at the beginning of PayloadVmOffset for
+ * various ControlVm commands. The receiver of a ControlVm command with a
+ * PayloadVmOffset will dereference this address and then use connection_offset,
+ * initiator_offset, and target_offset to get the location of UTF-8 formatted
+ * strings that can be parsed to obtain command-specific information. The value
+ * of total_length should equal PayloadBytes. The format of the strings at
+ * PayloadVmOffset will take different forms depending on the message.
+ */
+struct visor_controlvm_parameters_header {
+	u32 total_length;
+	u32 header_length;
+	u32 connection_offset;
+	u32 connection_length;
+	u32 initiator_offset;
+	u32 initiator_length;
+	u32 target_offset;
+	u32 target_length;
+	u32 client_offset;
+	u32 client_length;
+	u32 name_offset;
+	u32 name_length;
+	guid_t id;
+	u32 revision;
+	/* Natural alignment */
+	u32 reserved;
+} __packed;
+
+/* General Errors------------------------------------------------------[0-99] */
+#define CONTROLVM_RESP_SUCCESS			   0
+#define CONTROLVM_RESP_ALREADY_DONE		   1
+#define CONTROLVM_RESP_IOREMAP_FAILED		   2
+#define CONTROLVM_RESP_KMALLOC_FAILED		   3
+#define CONTROLVM_RESP_ID_UNKNOWN		   4
+#define CONTROLVM_RESP_ID_INVALID_FOR_CLIENT	   5
+/* CONTROLVM_INIT_CHIPSET-------------------------------------------[100-199] */
+#define CONTROLVM_RESP_CLIENT_SWITCHCOUNT_NONZERO  100
+#define CONTROLVM_RESP_EXPECTED_CHIPSET_INIT	   101
+/* Maximum Limit----------------------------------------------------[200-299] */
+/* BUS_CREATE */
+#define CONTROLVM_RESP_ERROR_MAX_BUSES		   201
+/* DEVICE_CREATE */
+#define CONTROLVM_RESP_ERROR_MAX_DEVICES	   202
+/* Payload and Parameter Related------------------------------------[400-499] */
+/* SWITCH_ATTACHEXTPORT, DEVICE_CONFIGURE */
+#define CONTROLVM_RESP_PAYLOAD_INVALID		   400
+/* Multiple */
+#define CONTROLVM_RESP_INITIATOR_PARAMETER_INVALID 401
+/* DEVICE_CONFIGURE */
+#define CONTROLVM_RESP_TARGET_PARAMETER_INVALID	   402
+/* DEVICE_CONFIGURE */
+#define CONTROLVM_RESP_CLIENT_PARAMETER_INVALID	   403
+/* Specified[Packet Structure] Value--------------------------------[500-599] */
+/* SWITCH_ATTACHINTPORT */
+/* BUS_CONFIGURE, DEVICE_CREATE, DEVICE_CONFIG, DEVICE_DESTROY */
+#define CONTROLVM_RESP_BUS_INVALID		   500
+/* SWITCH_ATTACHINTPORT*/
+/* DEVICE_CREATE, DEVICE_CONFIGURE, DEVICE_DESTROY */
+#define CONTROLVM_RESP_DEVICE_INVALID		   501
+/* DEVICE_CREATE, DEVICE_CONFIGURE */
+#define CONTROLVM_RESP_CHANNEL_INVALID		   502
+/* Partition Driver Callback Interface------------------------------[600-699] */
+/* BUS_CREATE, BUS_DESTROY, DEVICE_CREATE, DEVICE_DESTROY */
+#define CONTROLVM_RESP_VIRTPCI_DRIVER_FAILURE	   604
+/* Unable to invoke VIRTPCI callback. VIRTPCI Callback returned error. */
+/* BUS_CREATE, BUS_DESTROY, DEVICE_CREATE, DEVICE_DESTROY */
+#define CONTROLVM_RESP_VIRTPCI_DRIVER_CALLBACK_ERROR   605
+/* Generic device callback returned error. */
+/* SWITCH_ATTACHEXTPORT, SWITCH_DETACHEXTPORT, DEVICE_CONFIGURE */
+#define CONTROLVM_RESP_GENERIC_DRIVER_CALLBACK_ERROR   606
+/* Bus Related------------------------------------------------------[700-799] */
+/* BUS_DESTROY */
+#define CONTROLVM_RESP_ERROR_BUS_DEVICE_ATTACHED       700
+/* Channel Related--------------------------------------------------[800-899] */
+/* GET_CHANNELINFO, DEVICE_DESTROY */
+#define CONTROLVM_RESP_CHANNEL_TYPE_UNKNOWN	       800
+/* DEVICE_CREATE */
+#define CONTROLVM_RESP_CHANNEL_SIZE_TOO_SMALL	       801
+/* Chipset Shutdown Related---------------------------------------[1000-1099] */
+#define CONTROLVM_RESP_CHIPSET_SHUTDOWN_FAILED	       1000
+#define CONTROLVM_RESP_CHIPSET_SHUTDOWN_ALREADY_ACTIVE 1001
+/* Chipset Stop Related-------------------------------------------[1100-1199] */
+#define CONTROLVM_RESP_CHIPSET_STOP_FAILED_BUS	       1100
+#define CONTROLVM_RESP_CHIPSET_STOP_FAILED_SWITCH      1101
+/* Device Related-------------------------------------------------[1400-1499] */
+#define CONTROLVM_RESP_DEVICE_UDEV_TIMEOUT	       1400
+
+/* __CONTROLVMCHANNEL_H__ */
+#endif