Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 10315 insertions, 0 deletions

diff --git a/drivers/vme/Kconfig b/drivers/vme/Kconfig
new file mode 100644
index 000000000..936392ca3
--- /dev/null
+++ b/drivers/vme/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# VME configuration.
+#
+
+menuconfig VME_BUS
+	bool "VME bridge support"
+	depends on PCI
+	help
+	  If you say Y here you get support for the VME bridge Framework.
+
+if VME_BUS
+
+source "drivers/vme/bridges/Kconfig"
+
+source "drivers/vme/boards/Kconfig"
+
+source "drivers/staging/vme/devices/Kconfig"
+
+endif # VME
diff --git a/drivers/vme/Makefile b/drivers/vme/Makefile
new file mode 100644
index 000000000..8bfe4b370
--- /dev/null
+++ b/drivers/vme/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the VME bridge device drivers.
+#
+obj-$(CONFIG_VME_BUS)		+= vme.o
+
+obj-y				+= bridges/
+obj-y				+= boards/
diff --git a/drivers/vme/boards/Kconfig b/drivers/vme/boards/Kconfig
new file mode 100644
index 000000000..7a255f729
--- /dev/null
+++ b/drivers/vme/boards/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+comment "VME Board Drivers"
+
+config VMIVME_7805
+	tristate "VMIVME-7805"
+	help
+	  If you say Y here you get support for the VMIVME-7805 board.
+	  This board has an additional control interface to the Universe II
+	  chip. This driver has to be included if you want to access VME bus
+	  with VMIVME-7805 board.
diff --git a/drivers/vme/boards/Makefile b/drivers/vme/boards/Makefile
new file mode 100644
index 000000000..871223814
--- /dev/null
+++ b/drivers/vme/boards/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the VME board drivers.
+#
+
+obj-$(CONFIG_VMIVME_7805)	+= vme_vmivme7805.o
diff --git a/drivers/vme/boards/vme_vmivme7805.c b/drivers/vme/boards/vme_vmivme7805.c
new file mode 100644
index 000000000..51e056bae
--- /dev/null
+++ b/drivers/vme/boards/vme_vmivme7805.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Support for the VMIVME-7805 board access to the Universe II bridge.
+ *
+ * Author: Arthur Benilov <arthur.benilov@iba-group.com>
+ * Copyright 2010 Ion Beam Application, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/io.h>
+
+#include "vme_vmivme7805.h"
+
+static int vmic_probe(struct pci_dev *, const struct pci_device_id *);
+static void vmic_remove(struct pci_dev *);
+
+/** Base address to access FPGA register */
+static void __iomem *vmic_base;
+
+static const char driver_name[] = "vmivme_7805";
+
+static const struct pci_device_id vmic_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VMIC, PCI_DEVICE_ID_VTIMR) },
+	{ },
+};
+
+static struct pci_driver vmic_driver = {
+	.name = driver_name,
+	.id_table = vmic_ids,
+	.probe = vmic_probe,
+	.remove = vmic_remove,
+};
+
+static int vmic_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int retval;
+	u32 data;
+
+	/* Enable the device */
+	retval = pci_enable_device(pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "Unable to enable device\n");
+		goto err;
+	}
+
+	/* Map Registers */
+	retval = pci_request_regions(pdev, driver_name);
+	if (retval) {
+		dev_err(&pdev->dev, "Unable to reserve resources\n");
+		goto err_resource;
+	}
+
+	/* Map registers in BAR 0 */
+	vmic_base = ioremap(pci_resource_start(pdev, 0), 16);
+	if (!vmic_base) {
+		dev_err(&pdev->dev, "Unable to remap CRG region\n");
+		retval = -EIO;
+		goto err_remap;
+	}
+
+	/* Clear the FPGA VME IF contents */
+	iowrite32(0, vmic_base + VME_CONTROL);
+
+	/* Clear any initial BERR  */
+	data = ioread32(vmic_base + VME_CONTROL) & 0x00000FFF;
+	data |= BM_VME_CONTROL_BERRST;
+	iowrite32(data, vmic_base + VME_CONTROL);
+
+	/* Enable the vme interface and byte swapping */
+	data = ioread32(vmic_base + VME_CONTROL) & 0x00000FFF;
+	data = data | BM_VME_CONTROL_MASTER_ENDIAN |
+			BM_VME_CONTROL_SLAVE_ENDIAN |
+			BM_VME_CONTROL_ABLE |
+			BM_VME_CONTROL_BERRI |
+			BM_VME_CONTROL_BPENA |
+			BM_VME_CONTROL_VBENA;
+	iowrite32(data, vmic_base + VME_CONTROL);
+
+	return 0;
+
+err_remap:
+	pci_release_regions(pdev);
+err_resource:
+	pci_disable_device(pdev);
+err:
+	return retval;
+}
+
+static void vmic_remove(struct pci_dev *pdev)
+{
+	iounmap(vmic_base);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+
+}
+
+module_pci_driver(vmic_driver);
+
+MODULE_DESCRIPTION("VMIVME-7805 board support driver");
+MODULE_AUTHOR("Arthur Benilov <arthur.benilov@iba-group.com>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/vme/boards/vme_vmivme7805.h b/drivers/vme/boards/vme_vmivme7805.h
new file mode 100644
index 000000000..c2c5e3053
--- /dev/null
+++ b/drivers/vme/boards/vme_vmivme7805.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * vmivme_7805.h
+ *
+ * Support for the VMIVME-7805 board access to the Universe II bridge.
+ *
+ * Author: Arthur Benilov <arthur.benilov@iba-group.com>
+ * Copyright 2010 Ion Beam Application, Inc.
+ */
+
+
+#ifndef _VMIVME_7805_H
+#define _VMIVME_7805_H
+
+#ifndef PCI_VENDOR_ID_VMIC
+#define PCI_VENDOR_ID_VMIC		0x114A
+#endif
+
+#ifndef PCI_DEVICE_ID_VTIMR
+#define PCI_DEVICE_ID_VTIMR		0x0004
+#endif
+
+#define VME_CONTROL			0x0000
+#define BM_VME_CONTROL_MASTER_ENDIAN	0x0001
+#define BM_VME_CONTROL_SLAVE_ENDIAN	0x0002
+#define BM_VME_CONTROL_ABLE		0x0004
+#define BM_VME_CONTROL_BERRI		0x0040
+#define BM_VME_CONTROL_BERRST		0x0080
+#define BM_VME_CONTROL_BPENA		0x0400
+#define BM_VME_CONTROL_VBENA		0x0800
+
+#endif /* _VMIVME_7805_H */
+
diff --git a/drivers/vme/bridges/Kconfig b/drivers/vme/bridges/Kconfig
new file mode 100644
index 000000000..cb3baed64
--- /dev/null
+++ b/drivers/vme/bridges/Kconfig
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-only
+comment "VME Bridge Drivers"
+
+config VME_CA91CX42
+	tristate "Universe II"
+	depends on VIRT_TO_BUS
+	help
+	 If you say Y here you get support for the Tundra CA91C142
+	 (Universe II) VME bridge chip.
+
+config VME_TSI148
+	tristate "Tempe"
+	depends on HAS_DMA
+	help
+	 If you say Y here you get support for the Tundra TSI148 VME bridge
+	 chip.
+
+config VME_FAKE
+	tristate "Fake"
+	help
+	 If you say Y here you get support for the fake VME bridge. This
+	 provides a virtualised VME Bus for devices with no VME bridge. This
+	 is mainly useful for VME development (in the absence of VME
+	 hardware).
diff --git a/drivers/vme/bridges/Makefile b/drivers/vme/bridges/Makefile
new file mode 100644
index 000000000..0a6cf8434
--- /dev/null
+++ b/drivers/vme/bridges/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_VME_CA91CX42)	+= vme_ca91cx42.o
+obj-$(CONFIG_VME_TSI148)	+= vme_tsi148.o
+obj-$(CONFIG_VME_FAKE)		+= vme_fake.o
diff --git a/drivers/vme/bridges/vme_ca91cx42.c b/drivers/vme/bridges/vme_ca91cx42.c
new file mode 100644
index 000000000..ea938dc29
--- /dev/null
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@@ -0,0 +1,1927 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Support for the Tundra Universe I/II VME-PCI Bridge Chips
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on work by Tom Armistead and Ajit Prem
+ * Copyright 2004 Motorola Inc.
+ *
+ * Derived from ca91c042.c by Michael Wyrick
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/poll.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/vme.h>
+
+#include "../vme_bridge.h"
+#include "vme_ca91cx42.h"
+
+static int ca91cx42_probe(struct pci_dev *, const struct pci_device_id *);
+static void ca91cx42_remove(struct pci_dev *);
+
+/* Module parameters */
+static int geoid;
+
+static const char driver_name[] = "vme_ca91cx42";
+
+static const struct pci_device_id ca91cx42_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_CA91C142) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, ca91cx42_ids);
+
+static struct pci_driver ca91cx42_driver = {
+	.name = driver_name,
+	.id_table = ca91cx42_ids,
+	.probe = ca91cx42_probe,
+	.remove = ca91cx42_remove,
+};
+
+static u32 ca91cx42_DMA_irqhandler(struct ca91cx42_driver *bridge)
+{
+	wake_up(&bridge->dma_queue);
+
+	return CA91CX42_LINT_DMA;
+}
+
+static u32 ca91cx42_LM_irqhandler(struct ca91cx42_driver *bridge, u32 stat)
+{
+	int i;
+	u32 serviced = 0;
+
+	for (i = 0; i < 4; i++) {
+		if (stat & CA91CX42_LINT_LM[i]) {
+			/* We only enable interrupts if the callback is set */
+			bridge->lm_callback[i](bridge->lm_data[i]);
+			serviced |= CA91CX42_LINT_LM[i];
+		}
+	}
+
+	return serviced;
+}
+
+/* XXX This needs to be split into 4 queues */
+static u32 ca91cx42_MB_irqhandler(struct ca91cx42_driver *bridge, int mbox_mask)
+{
+	wake_up(&bridge->mbox_queue);
+
+	return CA91CX42_LINT_MBOX;
+}
+
+static u32 ca91cx42_IACK_irqhandler(struct ca91cx42_driver *bridge)
+{
+	wake_up(&bridge->iack_queue);
+
+	return CA91CX42_LINT_SW_IACK;
+}
+
+static u32 ca91cx42_VERR_irqhandler(struct vme_bridge *ca91cx42_bridge)
+{
+	int val;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	val = ioread32(bridge->base + DGCS);
+
+	if (!(val & 0x00000800)) {
+		dev_err(ca91cx42_bridge->parent, "ca91cx42_VERR_irqhandler DMA "
+			"Read Error DGCS=%08X\n", val);
+	}
+
+	return CA91CX42_LINT_VERR;
+}
+
+static u32 ca91cx42_LERR_irqhandler(struct vme_bridge *ca91cx42_bridge)
+{
+	int val;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	val = ioread32(bridge->base + DGCS);
+
+	if (!(val & 0x00000800))
+		dev_err(ca91cx42_bridge->parent, "ca91cx42_LERR_irqhandler DMA "
+			"Read Error DGCS=%08X\n", val);
+
+	return CA91CX42_LINT_LERR;
+}
+
+
+static u32 ca91cx42_VIRQ_irqhandler(struct vme_bridge *ca91cx42_bridge,
+	int stat)
+{
+	int vec, i, serviced = 0;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+
+	for (i = 7; i > 0; i--) {
+		if (stat & (1 << i)) {
+			vec = ioread32(bridge->base +
+				CA91CX42_V_STATID[i]) & 0xff;
+
+			vme_irq_handler(ca91cx42_bridge, i, vec);
+
+			serviced |= (1 << i);
+		}
+	}
+
+	return serviced;
+}
+
+static irqreturn_t ca91cx42_irqhandler(int irq, void *ptr)
+{
+	u32 stat, enable, serviced = 0;
+	struct vme_bridge *ca91cx42_bridge;
+	struct ca91cx42_driver *bridge;
+
+	ca91cx42_bridge = ptr;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	enable = ioread32(bridge->base + LINT_EN);
+	stat = ioread32(bridge->base + LINT_STAT);
+
+	/* Only look at unmasked interrupts */
+	stat &= enable;
+
+	if (unlikely(!stat))
+		return IRQ_NONE;
+
+	if (stat & CA91CX42_LINT_DMA)
+		serviced |= ca91cx42_DMA_irqhandler(bridge);
+	if (stat & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 |
+			CA91CX42_LINT_LM3))
+		serviced |= ca91cx42_LM_irqhandler(bridge, stat);
+	if (stat & CA91CX42_LINT_MBOX)
+		serviced |= ca91cx42_MB_irqhandler(bridge, stat);
+	if (stat & CA91CX42_LINT_SW_IACK)
+		serviced |= ca91cx42_IACK_irqhandler(bridge);
+	if (stat & CA91CX42_LINT_VERR)
+		serviced |= ca91cx42_VERR_irqhandler(ca91cx42_bridge);
+	if (stat & CA91CX42_LINT_LERR)
+		serviced |= ca91cx42_LERR_irqhandler(ca91cx42_bridge);
+	if (stat & (CA91CX42_LINT_VIRQ1 | CA91CX42_LINT_VIRQ2 |
+			CA91CX42_LINT_VIRQ3 | CA91CX42_LINT_VIRQ4 |
+			CA91CX42_LINT_VIRQ5 | CA91CX42_LINT_VIRQ6 |
+			CA91CX42_LINT_VIRQ7))
+		serviced |= ca91cx42_VIRQ_irqhandler(ca91cx42_bridge, stat);
+
+	/* Clear serviced interrupts */
+	iowrite32(serviced, bridge->base + LINT_STAT);
+
+	return IRQ_HANDLED;
+}
+
+static int ca91cx42_irq_init(struct vme_bridge *ca91cx42_bridge)
+{
+	int result, tmp;
+	struct pci_dev *pdev;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	/* Need pdev */
+	pdev = to_pci_dev(ca91cx42_bridge->parent);
+
+	/* Disable interrupts from PCI to VME */
+	iowrite32(0, bridge->base + VINT_EN);
+
+	/* Disable PCI interrupts */
+	iowrite32(0, bridge->base + LINT_EN);
+	/* Clear Any Pending PCI Interrupts */
+	iowrite32(0x00FFFFFF, bridge->base + LINT_STAT);
+
+	result = request_irq(pdev->irq, ca91cx42_irqhandler, IRQF_SHARED,
+			driver_name, ca91cx42_bridge);
+	if (result) {
+		dev_err(&pdev->dev, "Can't get assigned pci irq vector %02X\n",
+		       pdev->irq);
+		return result;
+	}
+
+	/* Ensure all interrupts are mapped to PCI Interrupt 0 */
+	iowrite32(0, bridge->base + LINT_MAP0);
+	iowrite32(0, bridge->base + LINT_MAP1);
+	iowrite32(0, bridge->base + LINT_MAP2);
+
+	/* Enable DMA, mailbox & LM Interrupts */
+	tmp = CA91CX42_LINT_MBOX3 | CA91CX42_LINT_MBOX2 | CA91CX42_LINT_MBOX1 |
+		CA91CX42_LINT_MBOX0 | CA91CX42_LINT_SW_IACK |
+		CA91CX42_LINT_VERR | CA91CX42_LINT_LERR | CA91CX42_LINT_DMA;
+
+	iowrite32(tmp, bridge->base + LINT_EN);
+
+	return 0;
+}
+
+static void ca91cx42_irq_exit(struct ca91cx42_driver *bridge,
+	struct pci_dev *pdev)
+{
+	struct vme_bridge *ca91cx42_bridge;
+
+	/* Disable interrupts from PCI to VME */
+	iowrite32(0, bridge->base + VINT_EN);
+
+	/* Disable PCI interrupts */
+	iowrite32(0, bridge->base + LINT_EN);
+	/* Clear Any Pending PCI Interrupts */
+	iowrite32(0x00FFFFFF, bridge->base + LINT_STAT);
+
+	ca91cx42_bridge = container_of((void *)bridge, struct vme_bridge,
+				       driver_priv);
+	free_irq(pdev->irq, ca91cx42_bridge);
+}
+
+static int ca91cx42_iack_received(struct ca91cx42_driver *bridge, int level)
+{
+	u32 tmp;
+
+	tmp = ioread32(bridge->base + LINT_STAT);
+
+	if (tmp & (1 << level))
+		return 0;
+	else
+		return 1;
+}
+
+/*
+ * Set up an VME interrupt
+ */
+static void ca91cx42_irq_set(struct vme_bridge *ca91cx42_bridge, int level,
+	int state, int sync)
+
+{
+	struct pci_dev *pdev;
+	u32 tmp;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	/* Enable IRQ level */
+	tmp = ioread32(bridge->base + LINT_EN);
+
+	if (state == 0)
+		tmp &= ~CA91CX42_LINT_VIRQ[level];
+	else
+		tmp |= CA91CX42_LINT_VIRQ[level];
+
+	iowrite32(tmp, bridge->base + LINT_EN);
+
+	if ((state == 0) && (sync != 0)) {
+		pdev = to_pci_dev(ca91cx42_bridge->parent);
+
+		synchronize_irq(pdev->irq);
+	}
+}
+
+static int ca91cx42_irq_generate(struct vme_bridge *ca91cx42_bridge, int level,
+	int statid)
+{
+	u32 tmp;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	/* Universe can only generate even vectors */
+	if (statid & 1)
+		return -EINVAL;
+
+	mutex_lock(&bridge->vme_int);
+
+	tmp = ioread32(bridge->base + VINT_EN);
+
+	/* Set Status/ID */
+	iowrite32(statid << 24, bridge->base + STATID);
+
+	/* Assert VMEbus IRQ */
+	tmp = tmp | (1 << (level + 24));
+	iowrite32(tmp, bridge->base + VINT_EN);
+
+	/* Wait for IACK */
+	wait_event_interruptible(bridge->iack_queue,
+				 ca91cx42_iack_received(bridge, level));
+
+	/* Return interrupt to low state */
+	tmp = ioread32(bridge->base + VINT_EN);
+	tmp = tmp & ~(1 << (level + 24));
+	iowrite32(tmp, bridge->base + VINT_EN);
+
+	mutex_unlock(&bridge->vme_int);
+
+	return 0;
+}
+
+static int ca91cx42_slave_set(struct vme_slave_resource *image, int enabled,
+	unsigned long long vme_base, unsigned long long size,
+	dma_addr_t pci_base, u32 aspace, u32 cycle)
+{
+	unsigned int i, addr = 0, granularity;
+	unsigned int temp_ctl = 0;
+	unsigned int vme_bound, pci_offset;
+	struct vme_bridge *ca91cx42_bridge;
+	struct ca91cx42_driver *bridge;
+
+	ca91cx42_bridge = image->parent;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	i = image->number;
+
+	switch (aspace) {
+	case VME_A16:
+		addr |= CA91CX42_VSI_CTL_VAS_A16;
+		break;
+	case VME_A24:
+		addr |= CA91CX42_VSI_CTL_VAS_A24;
+		break;
+	case VME_A32:
+		addr |= CA91CX42_VSI_CTL_VAS_A32;
+		break;
+	case VME_USER1:
+		addr |= CA91CX42_VSI_CTL_VAS_USER1;
+		break;
+	case VME_USER2:
+		addr |= CA91CX42_VSI_CTL_VAS_USER2;
+		break;
+	case VME_A64:
+	case VME_CRCSR:
+	case VME_USER3:
+	case VME_USER4:
+	default:
+		dev_err(ca91cx42_bridge->parent, "Invalid address space\n");
+		return -EINVAL;
+		break;
+	}
+
+	/*
+	 * Bound address is a valid address for the window, adjust
+	 * accordingly
+	 */
+	vme_bound = vme_base + size;
+	pci_offset = pci_base - vme_base;
+
+	if ((i == 0) || (i == 4))
+		granularity = 0x1000;
+	else
+		granularity = 0x10000;
+
+	if (vme_base & (granularity - 1)) {
+		dev_err(ca91cx42_bridge->parent, "Invalid VME base "
+			"alignment\n");
+		return -EINVAL;
+	}
+	if (vme_bound & (granularity - 1)) {
+		dev_err(ca91cx42_bridge->parent, "Invalid VME bound "
+			"alignment\n");
+		return -EINVAL;
+	}
+	if (pci_offset & (granularity - 1)) {
+		dev_err(ca91cx42_bridge->parent, "Invalid PCI Offset "
+			"alignment\n");
+		return -EINVAL;
+	}
+
+	/* Disable while we are mucking around */
+	temp_ctl = ioread32(bridge->base + CA91CX42_VSI_CTL[i]);
+	temp_ctl &= ~CA91CX42_VSI_CTL_EN;
+	iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]);
+
+	/* Setup mapping */
+	iowrite32(vme_base, bridge->base + CA91CX42_VSI_BS[i]);
+	iowrite32(vme_bound, bridge->base + CA91CX42_VSI_BD[i]);
+	iowrite32(pci_offset, bridge->base + CA91CX42_VSI_TO[i]);
+
+	/* Setup address space */
+	temp_ctl &= ~CA91CX42_VSI_CTL_VAS_M;
+	temp_ctl |= addr;
+
+	/* Setup cycle types */
+	temp_ctl &= ~(CA91CX42_VSI_CTL_PGM_M | CA91CX42_VSI_CTL_SUPER_M);
+	if (cycle & VME_SUPER)
+		temp_ctl |= CA91CX42_VSI_CTL_SUPER_SUPR;
+	if (cycle & VME_USER)
+		temp_ctl |= CA91CX42_VSI_CTL_SUPER_NPRIV;
+	if (cycle & VME_PROG)
+		temp_ctl |= CA91CX42_VSI_CTL_PGM_PGM;
+	if (cycle & VME_DATA)
+		temp_ctl |= CA91CX42_VSI_CTL_PGM_DATA;
+
+	/* Write ctl reg without enable */
+	iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]);
+
+	if (enabled)
+		temp_ctl |= CA91CX42_VSI_CTL_EN;
+
+	iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]);
+
+	return 0;
+}
+
+static int ca91cx42_slave_get(struct vme_slave_resource *image, int *enabled,
+	unsigned long long *vme_base, unsigned long long *size,
+	dma_addr_t *pci_base, u32 *aspace, u32 *cycle)
+{
+	unsigned int i, granularity = 0, ctl = 0;
+	unsigned long long vme_bound, pci_offset;
+	struct ca91cx42_driver *bridge;
+
+	bridge = image->parent->driver_priv;
+
+	i = image->number;
+
+	if ((i == 0) || (i == 4))
+		granularity = 0x1000;
+	else
+		granularity = 0x10000;
+
+	/* Read Registers */
+	ctl = ioread32(bridge->base + CA91CX42_VSI_CTL[i]);
+
+	*vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]);
+	vme_bound = ioread32(bridge->base + CA91CX42_VSI_BD[i]);
+	pci_offset = ioread32(bridge->base + CA91CX42_VSI_TO[i]);
+
+	*pci_base = (dma_addr_t)*vme_base + pci_offset;
+	*size = (unsigned long long)((vme_bound - *vme_base) + granularity);
+
+	*enabled = 0;
+	*aspace = 0;
+	*cycle = 0;
+
+	if (ctl & CA91CX42_VSI_CTL_EN)
+		*enabled = 1;
+
+	if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A16)
+		*aspace = VME_A16;
+	if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A24)
+		*aspace = VME_A24;
+	if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A32)
+		*aspace = VME_A32;
+	if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER1)
+		*aspace = VME_USER1;
+	if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER2)
+		*aspace = VME_USER2;
+
+	if (ctl & CA91CX42_VSI_CTL_SUPER_SUPR)
+		*cycle |= VME_SUPER;
+	if (ctl & CA91CX42_VSI_CTL_SUPER_NPRIV)
+		*cycle |= VME_USER;
+	if (ctl & CA91CX42_VSI_CTL_PGM_PGM)
+		*cycle |= VME_PROG;
+	if (ctl & CA91CX42_VSI_CTL_PGM_DATA)
+		*cycle |= VME_DATA;
+
+	return 0;
+}
+
+/*
+ * Allocate and map PCI Resource
+ */
+static int ca91cx42_alloc_resource(struct vme_master_resource *image,
+	unsigned long long size)
+{
+	unsigned long long existing_size;
+	int retval = 0;
+	struct pci_dev *pdev;
+	struct vme_bridge *ca91cx42_bridge;
+
+	ca91cx42_bridge = image->parent;
+
+	/* Find pci_dev container of dev */
+	if (!ca91cx42_bridge->parent) {
+		dev_err(ca91cx42_bridge->parent, "Dev entry NULL\n");
+		return -EINVAL;
+	}
+	pdev = to_pci_dev(ca91cx42_bridge->parent);
+
+	existing_size = (unsigned long long)(image->bus_resource.end -
+		image->bus_resource.start);
+
+	/* If the existing size is OK, return */
+	if (existing_size == (size - 1))
+		return 0;
+
+	if (existing_size != 0) {
+		iounmap(image->kern_base);
+		image->kern_base = NULL;
+		kfree(image->bus_resource.name);
+		release_resource(&image->bus_resource);
+		memset(&image->bus_resource, 0, sizeof(image->bus_resource));
+	}
+
+	if (!image->bus_resource.name) {
+		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
+		if (!image->bus_resource.name) {
+			retval = -ENOMEM;
+			goto err_name;
+		}
+	}
+
+	sprintf((char *)image->bus_resource.name, "%s.%d",
+		ca91cx42_bridge->name, image->number);
+
+	image->bus_resource.start = 0;
+	image->bus_resource.end = (unsigned long)size;
+	image->bus_resource.flags = IORESOURCE_MEM;
+
+	retval = pci_bus_alloc_resource(pdev->bus,
+		&image->bus_resource, size, 0x10000, PCIBIOS_MIN_MEM,
+		0, NULL, NULL);
+	if (retval) {
+		dev_err(ca91cx42_bridge->parent, "Failed to allocate mem "
+			"resource for window %d size 0x%lx start 0x%lx\n",
+			image->number, (unsigned long)size,
+			(unsigned long)image->bus_resource.start);
+		goto err_resource;
+	}
+
+	image->kern_base = ioremap(
+		image->bus_resource.start, size);
+	if (!image->kern_base) {
+		dev_err(ca91cx42_bridge->parent, "Failed to remap resource\n");
+		retval = -ENOMEM;
+		goto err_remap;
+	}
+
+	return 0;
+
+err_remap:
+	release_resource(&image->bus_resource);
+err_resource:
+	kfree(image->bus_resource.name);
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
+err_name:
+	return retval;
+}
+
+/*
+ * Free and unmap PCI Resource
+ */
+static void ca91cx42_free_resource(struct vme_master_resource *image)
+{
+	iounmap(image->kern_base);
+	image->kern_base = NULL;
+	release_resource(&image->bus_resource);
+	kfree(image->bus_resource.name);
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
+}
+
+
+static int ca91cx42_master_set(struct vme_master_resource *image, int enabled,
+	unsigned long long vme_base, unsigned long long size, u32 aspace,
+	u32 cycle, u32 dwidth)
+{
+	int retval = 0;
+	unsigned int i, granularity = 0;
+	unsigned int temp_ctl = 0;
+	unsigned long long pci_bound, vme_offset, pci_base;
+	struct vme_bridge *ca91cx42_bridge;
+	struct ca91cx42_driver *bridge;
+
+	ca91cx42_bridge = image->parent;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	i = image->number;
+
+	if ((i == 0) || (i == 4))
+		granularity = 0x1000;
+	else
+		granularity = 0x10000;
+
+	/* Verify input data */
+	if (vme_base & (granularity - 1)) {
+		dev_err(ca91cx42_bridge->parent, "Invalid VME Window "
+			"alignment\n");
+		retval = -EINVAL;
+		goto err_window;
+	}
+	if (size & (granularity - 1)) {
+		dev_err(ca91cx42_bridge->parent, "Invalid VME Window "
+			"alignment\n");
+		retval = -EINVAL;
+		goto err_window;
+	}
+
+	spin_lock(&image->lock);
+
+	/*
+	 * Let's allocate the resource here rather than further up the stack as
+	 * it avoids pushing loads of bus dependent stuff up the stack
+	 */
+	retval = ca91cx42_alloc_resource(image, size);
+	if (retval) {
+		spin_unlock(&image->lock);
+		dev_err(ca91cx42_bridge->parent, "Unable to allocate memory "
+			"for resource name\n");
+		retval = -ENOMEM;
+		goto err_res;
+	}
+
+	pci_base = (unsigned long long)image->bus_resource.start;
+
+	/*
+	 * Bound address is a valid address for the window, adjust
+	 * according to window granularity.
+	 */
+	pci_bound = pci_base + size;
+	vme_offset = vme_base - pci_base;
+
+	/* Disable while we are mucking around */
+	temp_ctl = ioread32(bridge->base + CA91CX42_LSI_CTL[i]);
+	temp_ctl &= ~CA91CX42_LSI_CTL_EN;
+	iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]);
+
+	/* Setup cycle types */
+	temp_ctl &= ~CA91CX42_LSI_CTL_VCT_M;
+	if (cycle & VME_BLT)
+		temp_ctl |= CA91CX42_LSI_CTL_VCT_BLT;
+	if (cycle & VME_MBLT)
+		temp_ctl |= CA91CX42_LSI_CTL_VCT_MBLT;
+
+	/* Setup data width */
+	temp_ctl &= ~CA91CX42_LSI_CTL_VDW_M;
+	switch (dwidth) {
+	case VME_D8:
+		temp_ctl |= CA91CX42_LSI_CTL_VDW_D8;
+		break;
+	case VME_D16:
+		temp_ctl |= CA91CX42_LSI_CTL_VDW_D16;
+		break;
+	case VME_D32:
+		temp_ctl |= CA91CX42_LSI_CTL_VDW_D32;
+		break;
+	case VME_D64:
+		temp_ctl |= CA91CX42_LSI_CTL_VDW_D64;
+		break;
+	default:
+		spin_unlock(&image->lock);
+		dev_err(ca91cx42_bridge->parent, "Invalid data width\n");
+		retval = -EINVAL;
+		goto err_dwidth;
+		break;
+	}
+
+	/* Setup address space */
+	temp_ctl &= ~CA91CX42_LSI_CTL_VAS_M;
+	switch (aspace) {
+	case VME_A16:
+		temp_ctl |= CA91CX42_LSI_CTL_VAS_A16;
+		break;
+	case VME_A24:
+		temp_ctl |= CA91CX42_LSI_CTL_VAS_A24;
+		break;
+	case VME_A32:
+		temp_ctl |= CA91CX42_LSI_CTL_VAS_A32;
+		break;
+	case VME_CRCSR:
+		temp_ctl |= CA91CX42_LSI_CTL_VAS_CRCSR;
+		break;
+	case VME_USER1:
+		temp_ctl |= CA91CX42_LSI_CTL_VAS_USER1;
+		break;
+	case VME_USER2:
+		temp_ctl |= CA91CX42_LSI_CTL_VAS_USER2;
+		break;
+	case VME_A64:
+	case VME_USER3:
+	case VME_USER4:
+	default:
+		spin_unlock(&image->lock);
+		dev_err(ca91cx42_bridge->parent, "Invalid address space\n");
+		retval = -EINVAL;
+		goto err_aspace;
+		break;
+	}
+
+	temp_ctl &= ~(CA91CX42_LSI_CTL_PGM_M | CA91CX42_LSI_CTL_SUPER_M);
+	if (cycle & VME_SUPER)
+		temp_ctl |= CA91CX42_LSI_CTL_SUPER_SUPR;
+	if (cycle & VME_PROG)
+		temp_ctl |= CA91CX42_LSI_CTL_PGM_PGM;
+
+	/* Setup mapping */
+	iowrite32(pci_base, bridge->base + CA91CX42_LSI_BS[i]);
+	iowrite32(pci_bound, bridge->base + CA91CX42_LSI_BD[i]);
+	iowrite32(vme_offset, bridge->base + CA91CX42_LSI_TO[i]);
+
+	/* Write ctl reg without enable */
+	iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]);
+
+	if (enabled)
+		temp_ctl |= CA91CX42_LSI_CTL_EN;
+
+	iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]);
+
+	spin_unlock(&image->lock);
+	return 0;
+
+err_aspace:
+err_dwidth:
+	ca91cx42_free_resource(image);
+err_res:
+err_window:
+	return retval;
+}
+
+static int __ca91cx42_master_get(struct vme_master_resource *image,
+	int *enabled, unsigned long long *vme_base, unsigned long long *size,
+	u32 *aspace, u32 *cycle, u32 *dwidth)
+{
+	unsigned int i, ctl;
+	unsigned long long pci_base, pci_bound, vme_offset;
+	struct ca91cx42_driver *bridge;
+
+	bridge = image->parent->driver_priv;
+
+	i = image->number;
+
+	ctl = ioread32(bridge->base + CA91CX42_LSI_CTL[i]);
+
+	pci_base = ioread32(bridge->base + CA91CX42_LSI_BS[i]);
+	vme_offset = ioread32(bridge->base + CA91CX42_LSI_TO[i]);
+	pci_bound = ioread32(bridge->base + CA91CX42_LSI_BD[i]);
+
+	*vme_base = pci_base + vme_offset;
+	*size = (unsigned long long)(pci_bound - pci_base);
+
+	*enabled = 0;
+	*aspace = 0;
+	*cycle = 0;
+	*dwidth = 0;
+
+	if (ctl & CA91CX42_LSI_CTL_EN)
+		*enabled = 1;
+
+	/* Setup address space */
+	switch (ctl & CA91CX42_LSI_CTL_VAS_M) {
+	case CA91CX42_LSI_CTL_VAS_A16:
+		*aspace = VME_A16;
+		break;
+	case CA91CX42_LSI_CTL_VAS_A24:
+		*aspace = VME_A24;
+		break;
+	case CA91CX42_LSI_CTL_VAS_A32:
+		*aspace = VME_A32;
+		break;
+	case CA91CX42_LSI_CTL_VAS_CRCSR:
+		*aspace = VME_CRCSR;
+		break;
+	case CA91CX42_LSI_CTL_VAS_USER1:
+		*aspace = VME_USER1;
+		break;
+	case CA91CX42_LSI_CTL_VAS_USER2:
+		*aspace = VME_USER2;
+		break;
+	}
+
+	/* XXX Not sure howto check for MBLT */
+	/* Setup cycle types */
+	if (ctl & CA91CX42_LSI_CTL_VCT_BLT)
+		*cycle |= VME_BLT;
+	else
+		*cycle |= VME_SCT;
+
+	if (ctl & CA91CX42_LSI_CTL_SUPER_SUPR)
+		*cycle |= VME_SUPER;
+	else
+		*cycle |= VME_USER;
+
+	if (ctl & CA91CX42_LSI_CTL_PGM_PGM)
+		*cycle = VME_PROG;
+	else
+		*cycle = VME_DATA;
+
+	/* Setup data width */
+	switch (ctl & CA91CX42_LSI_CTL_VDW_M) {
+	case CA91CX42_LSI_CTL_VDW_D8:
+		*dwidth = VME_D8;
+		break;
+	case CA91CX42_LSI_CTL_VDW_D16:
+		*dwidth = VME_D16;
+		break;
+	case CA91CX42_LSI_CTL_VDW_D32:
+		*dwidth = VME_D32;
+		break;
+	case CA91CX42_LSI_CTL_VDW_D64:
+		*dwidth = VME_D64;
+		break;
+	}
+
+	return 0;
+}
+
+static int ca91cx42_master_get(struct vme_master_resource *image, int *enabled,
+	unsigned long long *vme_base, unsigned long long *size, u32 *aspace,
+	u32 *cycle, u32 *dwidth)
+{
+	int retval;
+
+	spin_lock(&image->lock);
+
+	retval = __ca91cx42_master_get(image, enabled, vme_base, size, aspace,
+		cycle, dwidth);
+
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+static ssize_t ca91cx42_master_read(struct vme_master_resource *image,
+	void *buf, size_t count, loff_t offset)
+{
+	ssize_t retval;
+	void __iomem *addr = image->kern_base + offset;
+	unsigned int done = 0;
+	unsigned int count32;
+
+	if (count == 0)
+		return 0;
+
+	spin_lock(&image->lock);
+
+	/* The following code handles VME address alignment. We cannot use
+	 * memcpy_xxx here because it may cut data transfers in to 8-bit
+	 * cycles when D16 or D32 cycles are required on the VME bus.
+	 * On the other hand, the bridge itself assures that the maximum data
+	 * cycle configured for the transfer is used and splits it
+	 * automatically for non-aligned addresses, so we don't want the
+	 * overhead of needlessly forcing small transfers for the entire cycle.
+	 */
+	if ((uintptr_t)addr & 0x1) {
+		*(u8 *)buf = ioread8(addr);
+		done += 1;
+		if (done == count)
+			goto out;
+	}
+	if ((uintptr_t)(addr + done) & 0x2) {
+		if ((count - done) < 2) {
+			*(u8 *)(buf + done) = ioread8(addr + done);
+			done += 1;
+			goto out;
+		} else {
+			*(u16 *)(buf + done) = ioread16(addr + done);
+			done += 2;
+		}
+	}
+
+	count32 = (count - done) & ~0x3;
+	while (done < count32) {
+		*(u32 *)(buf + done) = ioread32(addr + done);
+		done += 4;
+	}
+
+	if ((count - done) & 0x2) {
+		*(u16 *)(buf + done) = ioread16(addr + done);
+		done += 2;
+	}
+	if ((count - done) & 0x1) {
+		*(u8 *)(buf + done) = ioread8(addr + done);
+		done += 1;
+	}
+out:
+	retval = count;
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+static ssize_t ca91cx42_master_write(struct vme_master_resource *image,
+	void *buf, size_t count, loff_t offset)
+{
+	ssize_t retval;
+	void __iomem *addr = image->kern_base + offset;
+	unsigned int done = 0;
+	unsigned int count32;
+
+	if (count == 0)
+		return 0;
+
+	spin_lock(&image->lock);
+
+	/* Here we apply for the same strategy we do in master_read
+	 * function in order to assure the correct cycles.
+	 */
+	if ((uintptr_t)addr & 0x1) {
+		iowrite8(*(u8 *)buf, addr);
+		done += 1;
+		if (done == count)
+			goto out;
+	}
+	if ((uintptr_t)(addr + done) & 0x2) {
+		if ((count - done) < 2) {
+			iowrite8(*(u8 *)(buf + done), addr + done);
+			done += 1;
+			goto out;
+		} else {
+			iowrite16(*(u16 *)(buf + done), addr + done);
+			done += 2;
+		}
+	}
+
+	count32 = (count - done) & ~0x3;
+	while (done < count32) {
+		iowrite32(*(u32 *)(buf + done), addr + done);
+		done += 4;
+	}
+
+	if ((count - done) & 0x2) {
+		iowrite16(*(u16 *)(buf + done), addr + done);
+		done += 2;
+	}
+	if ((count - done) & 0x1) {
+		iowrite8(*(u8 *)(buf + done), addr + done);
+		done += 1;
+	}
+out:
+	retval = count;
+
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+static unsigned int ca91cx42_master_rmw(struct vme_master_resource *image,
+	unsigned int mask, unsigned int compare, unsigned int swap,
+	loff_t offset)
+{
+	u32 result;
+	uintptr_t pci_addr;
+	struct ca91cx42_driver *bridge;
+	struct device *dev;
+
+	bridge = image->parent->driver_priv;
+	dev = image->parent->parent;
+
+	/* Find the PCI address that maps to the desired VME address */
+
+	/* Locking as we can only do one of these at a time */
+	mutex_lock(&bridge->vme_rmw);
+
+	/* Lock image */
+	spin_lock(&image->lock);
+
+	pci_addr = (uintptr_t)image->kern_base + offset;
+
+	/* Address must be 4-byte aligned */
+	if (pci_addr & 0x3) {
+		dev_err(dev, "RMW Address not 4-byte aligned\n");
+		result = -EINVAL;
+		goto out;
+	}
+
+	/* Ensure RMW Disabled whilst configuring */
+	iowrite32(0, bridge->base + SCYC_CTL);
+
+	/* Configure registers */
+	iowrite32(mask, bridge->base + SCYC_EN);
+	iowrite32(compare, bridge->base + SCYC_CMP);
+	iowrite32(swap, bridge->base + SCYC_SWP);
+	iowrite32(pci_addr, bridge->base + SCYC_ADDR);
+
+	/* Enable RMW */
+	iowrite32(CA91CX42_SCYC_CTL_CYC_RMW, bridge->base + SCYC_CTL);
+
+	/* Kick process off with a read to the required address. */
+	result = ioread32(image->kern_base + offset);
+
+	/* Disable RMW */
+	iowrite32(0, bridge->base + SCYC_CTL);
+
+out:
+	spin_unlock(&image->lock);
+
+	mutex_unlock(&bridge->vme_rmw);
+
+	return result;
+}
+
+static int ca91cx42_dma_list_add(struct vme_dma_list *list,
+	struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count)
+{
+	struct ca91cx42_dma_entry *entry, *prev;
+	struct vme_dma_pci *pci_attr;
+	struct vme_dma_vme *vme_attr;
+	dma_addr_t desc_ptr;
+	int retval = 0;
+	struct device *dev;
+
+	dev = list->parent->parent->parent;
+
+	/* XXX descriptor must be aligned on 64-bit boundaries */
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
+		retval = -ENOMEM;
+		goto err_mem;
+	}
+
+	/* Test descriptor alignment */
+	if ((unsigned long)&entry->descriptor & CA91CX42_DCPP_M) {
+		dev_err(dev, "Descriptor not aligned to 16 byte boundary as "
+			"required: %p\n", &entry->descriptor);
+		retval = -EINVAL;
+		goto err_align;
+	}
+
+	memset(&entry->descriptor, 0, sizeof(entry->descriptor));
+
+	if (dest->type == VME_DMA_VME) {
+		entry->descriptor.dctl |= CA91CX42_DCTL_L2V;
+		vme_attr = dest->private;
+		pci_attr = src->private;
+	} else {
+		vme_attr = src->private;
+		pci_attr = dest->private;
+	}
+
+	/* Check we can do fulfill required attributes */
+	if ((vme_attr->aspace & ~(VME_A16 | VME_A24 | VME_A32 | VME_USER1 |
+		VME_USER2)) != 0) {
+
+		dev_err(dev, "Unsupported cycle type\n");
+		retval = -EINVAL;
+		goto err_aspace;
+	}
+
+	if ((vme_attr->cycle & ~(VME_SCT | VME_BLT | VME_SUPER | VME_USER |
+		VME_PROG | VME_DATA)) != 0) {
+
+		dev_err(dev, "Unsupported cycle type\n");
+		retval = -EINVAL;
+		goto err_cycle;
+	}
+
+	/* Check to see if we can fulfill source and destination */
+	if (!(((src->type == VME_DMA_PCI) && (dest->type == VME_DMA_VME)) ||
+		((src->type == VME_DMA_VME) && (dest->type == VME_DMA_PCI)))) {
+
+		dev_err(dev, "Cannot perform transfer with this "
+			"source-destination combination\n");
+		retval = -EINVAL;
+		goto err_direct;
+	}
+
+	/* Setup cycle types */
+	if (vme_attr->cycle & VME_BLT)
+		entry->descriptor.dctl |= CA91CX42_DCTL_VCT_BLT;
+
+	/* Setup data width */
+	switch (vme_attr->dwidth) {
+	case VME_D8:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D8;
+		break;
+	case VME_D16:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D16;
+		break;
+	case VME_D32:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D32;
+		break;
+	case VME_D64:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D64;
+		break;
+	default:
+		dev_err(dev, "Invalid data width\n");
+		return -EINVAL;
+	}
+
+	/* Setup address space */
+	switch (vme_attr->aspace) {
+	case VME_A16:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A16;
+		break;
+	case VME_A24:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A24;
+		break;
+	case VME_A32:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A32;
+		break;
+	case VME_USER1:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VAS_USER1;
+		break;
+	case VME_USER2:
+		entry->descriptor.dctl |= CA91CX42_DCTL_VAS_USER2;
+		break;
+	default:
+		dev_err(dev, "Invalid address space\n");
+		return -EINVAL;
+		break;
+	}
+
+	if (vme_attr->cycle & VME_SUPER)
+		entry->descriptor.dctl |= CA91CX42_DCTL_SUPER_SUPR;
+	if (vme_attr->cycle & VME_PROG)
+		entry->descriptor.dctl |= CA91CX42_DCTL_PGM_PGM;
+
+	entry->descriptor.dtbc = count;
+	entry->descriptor.dla = pci_attr->address;
+	entry->descriptor.dva = vme_attr->address;
+	entry->descriptor.dcpp = CA91CX42_DCPP_NULL;
+
+	/* Add to list */
+	list_add_tail(&entry->list, &list->entries);
+
+	/* Fill out previous descriptors "Next Address" */
+	if (entry->list.prev != &list->entries) {
+		prev = list_entry(entry->list.prev, struct ca91cx42_dma_entry,
+			list);
+		/* We need the bus address for the pointer */
+		desc_ptr = virt_to_bus(&entry->descriptor);
+		prev->descriptor.dcpp = desc_ptr & ~CA91CX42_DCPP_M;
+	}
+
+	return 0;
+
+err_cycle:
+err_aspace:
+err_direct:
+err_align:
+	kfree(entry);
+err_mem:
+	return retval;
+}
+
+static int ca91cx42_dma_busy(struct vme_bridge *ca91cx42_bridge)
+{
+	u32 tmp;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	tmp = ioread32(bridge->base + DGCS);
+
+	if (tmp & CA91CX42_DGCS_ACT)
+		return 0;
+	else
+		return 1;
+}
+
+static int ca91cx42_dma_list_exec(struct vme_dma_list *list)
+{
+	struct vme_dma_resource *ctrlr;
+	struct ca91cx42_dma_entry *entry;
+	int retval;
+	dma_addr_t bus_addr;
+	u32 val;
+	struct device *dev;
+	struct ca91cx42_driver *bridge;
+
+	ctrlr = list->parent;
+
+	bridge = ctrlr->parent->driver_priv;
+	dev = ctrlr->parent->parent;
+
+	mutex_lock(&ctrlr->mtx);
+
+	if (!(list_empty(&ctrlr->running))) {
+		/*
+		 * XXX We have an active DMA transfer and currently haven't
+		 *     sorted out the mechanism for "pending" DMA transfers.
+		 *     Return busy.
+		 */
+		/* Need to add to pending here */
+		mutex_unlock(&ctrlr->mtx);
+		return -EBUSY;
+	} else {
+		list_add(&list->list, &ctrlr->running);
+	}
+
+	/* Get first bus address and write into registers */
+	entry = list_first_entry(&list->entries, struct ca91cx42_dma_entry,
+		list);
+
+	bus_addr = virt_to_bus(&entry->descriptor);
+
+	mutex_unlock(&ctrlr->mtx);
+
+	iowrite32(0, bridge->base + DTBC);
+	iowrite32(bus_addr & ~CA91CX42_DCPP_M, bridge->base + DCPP);
+
+	/* Start the operation */
+	val = ioread32(bridge->base + DGCS);
+
+	/* XXX Could set VMEbus On and Off Counters here */
+	val &= (CA91CX42_DGCS_VON_M | CA91CX42_DGCS_VOFF_M);
+
+	val |= (CA91CX42_DGCS_CHAIN | CA91CX42_DGCS_STOP | CA91CX42_DGCS_HALT |
+		CA91CX42_DGCS_DONE | CA91CX42_DGCS_LERR | CA91CX42_DGCS_VERR |
+		CA91CX42_DGCS_PERR);
+
+	iowrite32(val, bridge->base + DGCS);
+
+	val |= CA91CX42_DGCS_GO;
+
+	iowrite32(val, bridge->base + DGCS);
+
+	retval = wait_event_interruptible(bridge->dma_queue,
+					  ca91cx42_dma_busy(ctrlr->parent));
+
+	if (retval) {
+		val = ioread32(bridge->base + DGCS);
+		iowrite32(val | CA91CX42_DGCS_STOP_REQ, bridge->base + DGCS);
+		/* Wait for the operation to abort */
+		wait_event(bridge->dma_queue,
+			   ca91cx42_dma_busy(ctrlr->parent));
+		retval = -EINTR;
+		goto exit;
+	}
+
+	/*
+	 * Read status register, this register is valid until we kick off a
+	 * new transfer.
+	 */
+	val = ioread32(bridge->base + DGCS);
+
+	if (val & (CA91CX42_DGCS_LERR | CA91CX42_DGCS_VERR |
+		CA91CX42_DGCS_PERR)) {
+
+		dev_err(dev, "ca91c042: DMA Error. DGCS=%08X\n", val);
+		val = ioread32(bridge->base + DCTL);
+		retval = -EIO;
+	}
+
+exit:
+	/* Remove list from running list */
+	mutex_lock(&ctrlr->mtx);
+	list_del(&list->list);
+	mutex_unlock(&ctrlr->mtx);
+
+	return retval;
+
+}
+
+static int ca91cx42_dma_list_empty(struct vme_dma_list *list)
+{
+	struct list_head *pos, *temp;
+	struct ca91cx42_dma_entry *entry;
+
+	/* detach and free each entry */
+	list_for_each_safe(pos, temp, &list->entries) {
+		list_del(pos);
+		entry = list_entry(pos, struct ca91cx42_dma_entry, list);
+		kfree(entry);
+	}
+
+	return 0;
+}
+
+/*
+ * All 4 location monitors reside at the same base - this is therefore a
+ * system wide configuration.
+ *
+ * This does not enable the LM monitor - that should be done when the first
+ * callback is attached and disabled when the last callback is removed.
+ */
+static int ca91cx42_lm_set(struct vme_lm_resource *lm,
+	unsigned long long lm_base, u32 aspace, u32 cycle)
+{
+	u32 temp_base, lm_ctl = 0;
+	int i;
+	struct ca91cx42_driver *bridge;
+	struct device *dev;
+
+	bridge = lm->parent->driver_priv;
+	dev = lm->parent->parent;
+
+	/* Check the alignment of the location monitor */
+	temp_base = (u32)lm_base;
+	if (temp_base & 0xffff) {
+		dev_err(dev, "Location monitor must be aligned to 64KB "
+			"boundary");
+		return -EINVAL;
+	}
+
+	mutex_lock(&lm->mtx);
+
+	/* If we already have a callback attached, we can't move it! */
+	for (i = 0; i < lm->monitors; i++) {
+		if (bridge->lm_callback[i]) {
+			mutex_unlock(&lm->mtx);
+			dev_err(dev, "Location monitor callback attached, "
+				"can't reset\n");
+			return -EBUSY;
+		}
+	}
+
+	switch (aspace) {
+	case VME_A16:
+		lm_ctl |= CA91CX42_LM_CTL_AS_A16;
+		break;
+	case VME_A24:
+		lm_ctl |= CA91CX42_LM_CTL_AS_A24;
+		break;
+	case VME_A32:
+		lm_ctl |= CA91CX42_LM_CTL_AS_A32;
+		break;
+	default:
+		mutex_unlock(&lm->mtx);
+		dev_err(dev, "Invalid address space\n");
+		return -EINVAL;
+		break;
+	}
+
+	if (cycle & VME_SUPER)
+		lm_ctl |= CA91CX42_LM_CTL_SUPR;
+	if (cycle & VME_USER)
+		lm_ctl |= CA91CX42_LM_CTL_NPRIV;
+	if (cycle & VME_PROG)
+		lm_ctl |= CA91CX42_LM_CTL_PGM;
+	if (cycle & VME_DATA)
+		lm_ctl |= CA91CX42_LM_CTL_DATA;
+
+	iowrite32(lm_base, bridge->base + LM_BS);
+	iowrite32(lm_ctl, bridge->base + LM_CTL);
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+/* Get configuration of the callback monitor and return whether it is enabled
+ * or disabled.
+ */
+static int ca91cx42_lm_get(struct vme_lm_resource *lm,
+	unsigned long long *lm_base, u32 *aspace, u32 *cycle)
+{
+	u32 lm_ctl, enabled = 0;
+	struct ca91cx42_driver *bridge;
+
+	bridge = lm->parent->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	*lm_base = (unsigned long long)ioread32(bridge->base + LM_BS);
+	lm_ctl = ioread32(bridge->base + LM_CTL);
+
+	if (lm_ctl & CA91CX42_LM_CTL_EN)
+		enabled = 1;
+
+	if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A16)
+		*aspace = VME_A16;
+	if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A24)
+		*aspace = VME_A24;
+	if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A32)
+		*aspace = VME_A32;
+
+	*cycle = 0;
+	if (lm_ctl & CA91CX42_LM_CTL_SUPR)
+		*cycle |= VME_SUPER;
+	if (lm_ctl & CA91CX42_LM_CTL_NPRIV)
+		*cycle |= VME_USER;
+	if (lm_ctl & CA91CX42_LM_CTL_PGM)
+		*cycle |= VME_PROG;
+	if (lm_ctl & CA91CX42_LM_CTL_DATA)
+		*cycle |= VME_DATA;
+
+	mutex_unlock(&lm->mtx);
+
+	return enabled;
+}
+
+/*
+ * Attach a callback to a specific location monitor.
+ *
+ * Callback will be passed the monitor triggered.
+ */
+static int ca91cx42_lm_attach(struct vme_lm_resource *lm, int monitor,
+	void (*callback)(void *), void *data)
+{
+	u32 lm_ctl, tmp;
+	struct ca91cx42_driver *bridge;
+	struct device *dev;
+
+	bridge = lm->parent->driver_priv;
+	dev = lm->parent->parent;
+
+	mutex_lock(&lm->mtx);
+
+	/* Ensure that the location monitor is configured - need PGM or DATA */
+	lm_ctl = ioread32(bridge->base + LM_CTL);
+	if ((lm_ctl & (CA91CX42_LM_CTL_PGM | CA91CX42_LM_CTL_DATA)) == 0) {
+		mutex_unlock(&lm->mtx);
+		dev_err(dev, "Location monitor not properly configured\n");
+		return -EINVAL;
+	}
+
+	/* Check that a callback isn't already attached */
+	if (bridge->lm_callback[monitor]) {
+		mutex_unlock(&lm->mtx);
+		dev_err(dev, "Existing callback attached\n");
+		return -EBUSY;
+	}
+
+	/* Attach callback */
+	bridge->lm_callback[monitor] = callback;
+	bridge->lm_data[monitor] = data;
+
+	/* Enable Location Monitor interrupt */
+	tmp = ioread32(bridge->base + LINT_EN);
+	tmp |= CA91CX42_LINT_LM[monitor];
+	iowrite32(tmp, bridge->base + LINT_EN);
+
+	/* Ensure that global Location Monitor Enable set */
+	if ((lm_ctl & CA91CX42_LM_CTL_EN) == 0) {
+		lm_ctl |= CA91CX42_LM_CTL_EN;
+		iowrite32(lm_ctl, bridge->base + LM_CTL);
+	}
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+/*
+ * Detach a callback function forn a specific location monitor.
+ */
+static int ca91cx42_lm_detach(struct vme_lm_resource *lm, int monitor)
+{
+	u32 tmp;
+	struct ca91cx42_driver *bridge;
+
+	bridge = lm->parent->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	/* Disable Location Monitor and ensure previous interrupts are clear */
+	tmp = ioread32(bridge->base + LINT_EN);
+	tmp &= ~CA91CX42_LINT_LM[monitor];
+	iowrite32(tmp, bridge->base + LINT_EN);
+
+	iowrite32(CA91CX42_LINT_LM[monitor],
+		 bridge->base + LINT_STAT);
+
+	/* Detach callback */
+	bridge->lm_callback[monitor] = NULL;
+	bridge->lm_data[monitor] = NULL;
+
+	/* If all location monitors disabled, disable global Location Monitor */
+	if ((tmp & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 |
+			CA91CX42_LINT_LM3)) == 0) {
+		tmp = ioread32(bridge->base + LM_CTL);
+		tmp &= ~CA91CX42_LM_CTL_EN;
+		iowrite32(tmp, bridge->base + LM_CTL);
+	}
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+static int ca91cx42_slot_get(struct vme_bridge *ca91cx42_bridge)
+{
+	u32 slot = 0;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	if (!geoid) {
+		slot = ioread32(bridge->base + VCSR_BS);
+		slot = ((slot & CA91CX42_VCSR_BS_SLOT_M) >> 27);
+	} else
+		slot = geoid;
+
+	return (int)slot;
+
+}
+
+static void *ca91cx42_alloc_consistent(struct device *parent, size_t size,
+	dma_addr_t *dma)
+{
+	struct pci_dev *pdev;
+
+	/* Find pci_dev container of dev */
+	pdev = to_pci_dev(parent);
+
+	return pci_alloc_consistent(pdev, size, dma);
+}
+
+static void ca91cx42_free_consistent(struct device *parent, size_t size,
+	void *vaddr, dma_addr_t dma)
+{
+	struct pci_dev *pdev;
+
+	/* Find pci_dev container of dev */
+	pdev = to_pci_dev(parent);
+
+	pci_free_consistent(pdev, size, vaddr, dma);
+}
+
+/*
+ * Configure CR/CSR space
+ *
+ * Access to the CR/CSR can be configured at power-up. The location of the
+ * CR/CSR registers in the CR/CSR address space is determined by the boards
+ * Auto-ID or Geographic address. This function ensures that the window is
+ * enabled at an offset consistent with the boards geopgraphic address.
+ */
+static int ca91cx42_crcsr_init(struct vme_bridge *ca91cx42_bridge,
+	struct pci_dev *pdev)
+{
+	unsigned int crcsr_addr;
+	int tmp, slot;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	slot = ca91cx42_slot_get(ca91cx42_bridge);
+
+	/* Write CSR Base Address if slot ID is supplied as a module param */
+	if (geoid)
+		iowrite32(geoid << 27, bridge->base + VCSR_BS);
+
+	dev_info(&pdev->dev, "CR/CSR Offset: %d\n", slot);
+	if (slot == 0) {
+		dev_err(&pdev->dev, "Slot number is unset, not configuring "
+			"CR/CSR space\n");
+		return -EINVAL;
+	}
+
+	/* Allocate mem for CR/CSR image */
+	bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
+						     &bridge->crcsr_bus);
+	if (!bridge->crcsr_kernel) {
+		dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR "
+			"image\n");
+		return -ENOMEM;
+	}
+
+	crcsr_addr = slot * (512 * 1024);
+	iowrite32(bridge->crcsr_bus - crcsr_addr, bridge->base + VCSR_TO);
+
+	tmp = ioread32(bridge->base + VCSR_CTL);
+	tmp |= CA91CX42_VCSR_CTL_EN;
+	iowrite32(tmp, bridge->base + VCSR_CTL);
+
+	return 0;
+}
+
+static void ca91cx42_crcsr_exit(struct vme_bridge *ca91cx42_bridge,
+	struct pci_dev *pdev)
+{
+	u32 tmp;
+	struct ca91cx42_driver *bridge;
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+	/* Turn off CR/CSR space */
+	tmp = ioread32(bridge->base + VCSR_CTL);
+	tmp &= ~CA91CX42_VCSR_CTL_EN;
+	iowrite32(tmp, bridge->base + VCSR_CTL);
+
+	/* Free image */
+	iowrite32(0, bridge->base + VCSR_TO);
+
+	pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel,
+		bridge->crcsr_bus);
+}
+
+static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int retval, i;
+	u32 data;
+	struct list_head *pos = NULL, *n;
+	struct vme_bridge *ca91cx42_bridge;
+	struct ca91cx42_driver *ca91cx42_device;
+	struct vme_master_resource *master_image;
+	struct vme_slave_resource *slave_image;
+	struct vme_dma_resource *dma_ctrlr;
+	struct vme_lm_resource *lm;
+
+	/* We want to support more than one of each bridge so we need to
+	 * dynamically allocate the bridge structure
+	 */
+	ca91cx42_bridge = kzalloc(sizeof(*ca91cx42_bridge), GFP_KERNEL);
+	if (!ca91cx42_bridge) {
+		retval = -ENOMEM;
+		goto err_struct;
+	}
+	vme_init_bridge(ca91cx42_bridge);
+
+	ca91cx42_device = kzalloc(sizeof(*ca91cx42_device), GFP_KERNEL);
+	if (!ca91cx42_device) {
+		retval = -ENOMEM;
+		goto err_driver;
+	}
+
+	ca91cx42_bridge->driver_priv = ca91cx42_device;
+
+	/* Enable the device */
+	retval = pci_enable_device(pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "Unable to enable device\n");
+		goto err_enable;
+	}
+
+	/* Map Registers */
+	retval = pci_request_regions(pdev, driver_name);
+	if (retval) {
+		dev_err(&pdev->dev, "Unable to reserve resources\n");
+		goto err_resource;
+	}
+
+	/* map registers in BAR 0 */
+	ca91cx42_device->base = ioremap(pci_resource_start(pdev, 0),
+		4096);
+	if (!ca91cx42_device->base) {
+		dev_err(&pdev->dev, "Unable to remap CRG region\n");
+		retval = -EIO;
+		goto err_remap;
+	}
+
+	/* Check to see if the mapping worked out */
+	data = ioread32(ca91cx42_device->base + CA91CX42_PCI_ID) & 0x0000FFFF;
+	if (data != PCI_VENDOR_ID_TUNDRA) {
+		dev_err(&pdev->dev, "PCI_ID check failed\n");
+		retval = -EIO;
+		goto err_test;
+	}
+
+	/* Initialize wait queues & mutual exclusion flags */
+	init_waitqueue_head(&ca91cx42_device->dma_queue);
+	init_waitqueue_head(&ca91cx42_device->iack_queue);
+	mutex_init(&ca91cx42_device->vme_int);
+	mutex_init(&ca91cx42_device->vme_rmw);
+
+	ca91cx42_bridge->parent = &pdev->dev;
+	strcpy(ca91cx42_bridge->name, driver_name);
+
+	/* Setup IRQ */
+	retval = ca91cx42_irq_init(ca91cx42_bridge);
+	if (retval != 0) {
+		dev_err(&pdev->dev, "Chip Initialization failed.\n");
+		goto err_irq;
+	}
+
+	/* Add master windows to list */
+	for (i = 0; i < CA91C142_MAX_MASTER; i++) {
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
+			retval = -ENOMEM;
+			goto err_master;
+		}
+		master_image->parent = ca91cx42_bridge;
+		spin_lock_init(&master_image->lock);
+		master_image->locked = 0;
+		master_image->number = i;
+		master_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
+			VME_CRCSR | VME_USER1 | VME_USER2;
+		master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
+			VME_SUPER | VME_USER | VME_PROG | VME_DATA;
+		master_image->width_attr = VME_D8 | VME_D16 | VME_D32 | VME_D64;
+		memset(&master_image->bus_resource, 0,
+		       sizeof(master_image->bus_resource));
+		master_image->kern_base  = NULL;
+		list_add_tail(&master_image->list,
+			&ca91cx42_bridge->master_resources);
+	}
+
+	/* Add slave windows to list */
+	for (i = 0; i < CA91C142_MAX_SLAVE; i++) {
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
+			retval = -ENOMEM;
+			goto err_slave;
+		}
+		slave_image->parent = ca91cx42_bridge;
+		mutex_init(&slave_image->mtx);
+		slave_image->locked = 0;
+		slave_image->number = i;
+		slave_image->address_attr = VME_A24 | VME_A32 | VME_USER1 |
+			VME_USER2;
+
+		/* Only windows 0 and 4 support A16 */
+		if (i == 0 || i == 4)
+			slave_image->address_attr |= VME_A16;
+
+		slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
+			VME_SUPER | VME_USER | VME_PROG | VME_DATA;
+		list_add_tail(&slave_image->list,
+			&ca91cx42_bridge->slave_resources);
+	}
+
+	/* Add dma engines to list */
+	for (i = 0; i < CA91C142_MAX_DMA; i++) {
+		dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL);
+		if (!dma_ctrlr) {
+			retval = -ENOMEM;
+			goto err_dma;
+		}
+		dma_ctrlr->parent = ca91cx42_bridge;
+		mutex_init(&dma_ctrlr->mtx);
+		dma_ctrlr->locked = 0;
+		dma_ctrlr->number = i;
+		dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM |
+			VME_DMA_MEM_TO_VME;
+		INIT_LIST_HEAD(&dma_ctrlr->pending);
+		INIT_LIST_HEAD(&dma_ctrlr->running);
+		list_add_tail(&dma_ctrlr->list,
+			&ca91cx42_bridge->dma_resources);
+	}
+
+	/* Add location monitor to list */
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
+		retval = -ENOMEM;
+		goto err_lm;
+	}
+	lm->parent = ca91cx42_bridge;
+	mutex_init(&lm->mtx);
+	lm->locked = 0;
+	lm->number = 1;
+	lm->monitors = 4;
+	list_add_tail(&lm->list, &ca91cx42_bridge->lm_resources);
+
+	ca91cx42_bridge->slave_get = ca91cx42_slave_get;
+	ca91cx42_bridge->slave_set = ca91cx42_slave_set;
+	ca91cx42_bridge->master_get = ca91cx42_master_get;
+	ca91cx42_bridge->master_set = ca91cx42_master_set;
+	ca91cx42_bridge->master_read = ca91cx42_master_read;
+	ca91cx42_bridge->master_write = ca91cx42_master_write;
+	ca91cx42_bridge->master_rmw = ca91cx42_master_rmw;
+	ca91cx42_bridge->dma_list_add = ca91cx42_dma_list_add;
+	ca91cx42_bridge->dma_list_exec = ca91cx42_dma_list_exec;
+	ca91cx42_bridge->dma_list_empty = ca91cx42_dma_list_empty;
+	ca91cx42_bridge->irq_set = ca91cx42_irq_set;
+	ca91cx42_bridge->irq_generate = ca91cx42_irq_generate;
+	ca91cx42_bridge->lm_set = ca91cx42_lm_set;
+	ca91cx42_bridge->lm_get = ca91cx42_lm_get;
+	ca91cx42_bridge->lm_attach = ca91cx42_lm_attach;
+	ca91cx42_bridge->lm_detach = ca91cx42_lm_detach;
+	ca91cx42_bridge->slot_get = ca91cx42_slot_get;
+	ca91cx42_bridge->alloc_consistent = ca91cx42_alloc_consistent;
+	ca91cx42_bridge->free_consistent = ca91cx42_free_consistent;
+
+	data = ioread32(ca91cx42_device->base + MISC_CTL);
+	dev_info(&pdev->dev, "Board is%s the VME system controller\n",
+		(data & CA91CX42_MISC_CTL_SYSCON) ? "" : " not");
+	dev_info(&pdev->dev, "Slot ID is %d\n",
+		ca91cx42_slot_get(ca91cx42_bridge));
+
+	if (ca91cx42_crcsr_init(ca91cx42_bridge, pdev))
+		dev_err(&pdev->dev, "CR/CSR configuration failed.\n");
+
+	/* Need to save ca91cx42_bridge pointer locally in link list for use in
+	 * ca91cx42_remove()
+	 */
+	retval = vme_register_bridge(ca91cx42_bridge);
+	if (retval != 0) {
+		dev_err(&pdev->dev, "Chip Registration failed.\n");
+		goto err_reg;
+	}
+
+	pci_set_drvdata(pdev, ca91cx42_bridge);
+
+	return 0;
+
+err_reg:
+	ca91cx42_crcsr_exit(ca91cx42_bridge, pdev);
+err_lm:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &ca91cx42_bridge->lm_resources) {
+		lm = list_entry(pos, struct vme_lm_resource, list);
+		list_del(pos);
+		kfree(lm);
+	}
+err_dma:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &ca91cx42_bridge->dma_resources) {
+		dma_ctrlr = list_entry(pos, struct vme_dma_resource, list);
+		list_del(pos);
+		kfree(dma_ctrlr);
+	}
+err_slave:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &ca91cx42_bridge->slave_resources) {
+		slave_image = list_entry(pos, struct vme_slave_resource, list);
+		list_del(pos);
+		kfree(slave_image);
+	}
+err_master:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &ca91cx42_bridge->master_resources) {
+		master_image = list_entry(pos, struct vme_master_resource,
+			list);
+		list_del(pos);
+		kfree(master_image);
+	}
+
+	ca91cx42_irq_exit(ca91cx42_device, pdev);
+err_irq:
+err_test:
+	iounmap(ca91cx42_device->base);
+err_remap:
+	pci_release_regions(pdev);
+err_resource:
+	pci_disable_device(pdev);
+err_enable:
+	kfree(ca91cx42_device);
+err_driver:
+	kfree(ca91cx42_bridge);
+err_struct:
+	return retval;
+
+}
+
+static void ca91cx42_remove(struct pci_dev *pdev)
+{
+	struct list_head *pos = NULL, *n;
+	struct vme_master_resource *master_image;
+	struct vme_slave_resource *slave_image;
+	struct vme_dma_resource *dma_ctrlr;
+	struct vme_lm_resource *lm;
+	struct ca91cx42_driver *bridge;
+	struct vme_bridge *ca91cx42_bridge = pci_get_drvdata(pdev);
+
+	bridge = ca91cx42_bridge->driver_priv;
+
+
+	/* Turn off Ints */
+	iowrite32(0, bridge->base + LINT_EN);
+
+	/* Turn off the windows */
+	iowrite32(0x00800000, bridge->base + LSI0_CTL);
+	iowrite32(0x00800000, bridge->base + LSI1_CTL);
+	iowrite32(0x00800000, bridge->base + LSI2_CTL);
+	iowrite32(0x00800000, bridge->base + LSI3_CTL);
+	iowrite32(0x00800000, bridge->base + LSI4_CTL);
+	iowrite32(0x00800000, bridge->base + LSI5_CTL);
+	iowrite32(0x00800000, bridge->base + LSI6_CTL);
+	iowrite32(0x00800000, bridge->base + LSI7_CTL);
+	iowrite32(0x00F00000, bridge->base + VSI0_CTL);
+	iowrite32(0x00F00000, bridge->base + VSI1_CTL);
+	iowrite32(0x00F00000, bridge->base + VSI2_CTL);
+	iowrite32(0x00F00000, bridge->base + VSI3_CTL);
+	iowrite32(0x00F00000, bridge->base + VSI4_CTL);
+	iowrite32(0x00F00000, bridge->base + VSI5_CTL);
+	iowrite32(0x00F00000, bridge->base + VSI6_CTL);
+	iowrite32(0x00F00000, bridge->base + VSI7_CTL);
+
+	vme_unregister_bridge(ca91cx42_bridge);
+
+	ca91cx42_crcsr_exit(ca91cx42_bridge, pdev);
+
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &ca91cx42_bridge->lm_resources) {
+		lm = list_entry(pos, struct vme_lm_resource, list);
+		list_del(pos);
+		kfree(lm);
+	}
+
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &ca91cx42_bridge->dma_resources) {
+		dma_ctrlr = list_entry(pos, struct vme_dma_resource, list);
+		list_del(pos);
+		kfree(dma_ctrlr);
+	}
+
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &ca91cx42_bridge->slave_resources) {
+		slave_image = list_entry(pos, struct vme_slave_resource, list);
+		list_del(pos);
+		kfree(slave_image);
+	}
+
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &ca91cx42_bridge->master_resources) {
+		master_image = list_entry(pos, struct vme_master_resource,
+			list);
+		list_del(pos);
+		kfree(master_image);
+	}
+
+	ca91cx42_irq_exit(bridge, pdev);
+
+	iounmap(bridge->base);
+
+	pci_release_regions(pdev);
+
+	pci_disable_device(pdev);
+
+	kfree(ca91cx42_bridge);
+}
+
+module_pci_driver(ca91cx42_driver);
+
+MODULE_PARM_DESC(geoid, "Override geographical addressing");
+module_param(geoid, int, 0);
+
+MODULE_DESCRIPTION("VME driver for the Tundra Universe II VME bridge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/vme/bridges/vme_ca91cx42.h b/drivers/vme/bridges/vme_ca91cx42.h
new file mode 100644
index 000000000..34a8c25de
--- /dev/null
+++ b/drivers/vme/bridges/vme_ca91cx42.h
@@ -0,0 +1,579 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ca91c042.h
+ *
+ * Support for the Tundra Universe 1 and Universe II VME bridge chips
+ *
+ * Author: Tom Armistead
+ * Updated by Ajit Prem
+ * Copyright 2004 Motorola Inc.
+ *
+ * Further updated by Martyn Welch <martyn.welch@ge.com>
+ * Copyright 2009 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Derived from ca91c042.h by Michael Wyrick
+ */
+
+#ifndef _CA91CX42_H
+#define _CA91CX42_H
+
+#ifndef	PCI_VENDOR_ID_TUNDRA
+#define	PCI_VENDOR_ID_TUNDRA 0x10e3
+#endif
+
+#ifndef	PCI_DEVICE_ID_TUNDRA_CA91C142
+#define	PCI_DEVICE_ID_TUNDRA_CA91C142 0x0000
+#endif
+
+/*
+ *  Define the number of each that the CA91C142 supports.
+ */
+#define CA91C142_MAX_MASTER		8	/* Max Master Windows */
+#define CA91C142_MAX_SLAVE		8	/* Max Slave Windows */
+#define CA91C142_MAX_DMA		1	/* Max DMA Controllers */
+#define CA91C142_MAX_MAILBOX		4	/* Max Mail Box registers */
+
+/* Structure used to hold driver specific information */
+struct ca91cx42_driver {
+	void __iomem *base;	/* Base Address of device registers */
+	wait_queue_head_t dma_queue;
+	wait_queue_head_t iack_queue;
+	wait_queue_head_t mbox_queue;
+	void (*lm_callback[4])(void *);	/* Called in interrupt handler */
+	void *lm_data[4];
+	void *crcsr_kernel;
+	dma_addr_t crcsr_bus;
+	struct mutex vme_rmw;		/* Only one RMW cycle at a time */
+	struct mutex vme_int;		/*
+					 * Only one VME interrupt can be
+					 * generated at a time, provide locking
+					 */
+};
+
+/* See Page 2-77 in the Universe User Manual */
+struct ca91cx42_dma_descriptor {
+	unsigned int dctl;      /* DMA Control */
+	unsigned int dtbc;      /* Transfer Byte Count */
+	unsigned int dla;       /* PCI Address */
+	unsigned int res1;      /* Reserved */
+	unsigned int dva;       /* Vme Address */
+	unsigned int res2;      /* Reserved */
+	unsigned int dcpp;      /* Pointer to Numed Cmd Packet with rPN */
+	unsigned int res3;      /* Reserved */
+};
+
+struct ca91cx42_dma_entry {
+	struct ca91cx42_dma_descriptor descriptor;
+	struct list_head list;
+};
+
+/* Universe Register Offsets */
+/* general PCI configuration registers */
+#define CA91CX42_PCI_ID		0x000
+#define CA91CX42_PCI_CSR	0x004
+#define CA91CX42_PCI_CLASS	0x008
+#define CA91CX42_PCI_MISC0	0x00C
+#define CA91CX42_PCI_BS		0x010
+#define CA91CX42_PCI_MISC1	0x03C
+
+#define LSI0_CTL		0x0100
+#define LSI0_BS			0x0104
+#define LSI0_BD			0x0108
+#define LSI0_TO			0x010C
+
+#define LSI1_CTL		0x0114
+#define LSI1_BS			0x0118
+#define LSI1_BD			0x011C
+#define LSI1_TO			0x0120
+
+#define LSI2_CTL		0x0128
+#define LSI2_BS			0x012C
+#define LSI2_BD			0x0130
+#define LSI2_TO			0x0134
+
+#define LSI3_CTL		0x013C
+#define LSI3_BS			0x0140
+#define LSI3_BD			0x0144
+#define LSI3_TO			0x0148
+
+#define LSI4_CTL		0x01A0
+#define LSI4_BS			0x01A4
+#define LSI4_BD			0x01A8
+#define LSI4_TO			0x01AC
+
+#define LSI5_CTL		0x01B4
+#define LSI5_BS			0x01B8
+#define LSI5_BD			0x01BC
+#define LSI5_TO			0x01C0
+
+#define LSI6_CTL		0x01C8
+#define LSI6_BS			0x01CC
+#define LSI6_BD			0x01D0
+#define LSI6_TO			0x01D4
+
+#define LSI7_CTL		0x01DC
+#define LSI7_BS			0x01E0
+#define LSI7_BD			0x01E4
+#define LSI7_TO			0x01E8
+
+static const int CA91CX42_LSI_CTL[] = { LSI0_CTL, LSI1_CTL, LSI2_CTL, LSI3_CTL,
+				LSI4_CTL, LSI5_CTL, LSI6_CTL, LSI7_CTL };
+
+static const int CA91CX42_LSI_BS[] = { LSI0_BS, LSI1_BS, LSI2_BS, LSI3_BS,
+				LSI4_BS, LSI5_BS, LSI6_BS, LSI7_BS };
+
+static const int CA91CX42_LSI_BD[] = { LSI0_BD, LSI1_BD, LSI2_BD, LSI3_BD,
+				LSI4_BD, LSI5_BD, LSI6_BD, LSI7_BD };
+
+static const int CA91CX42_LSI_TO[] = { LSI0_TO, LSI1_TO, LSI2_TO, LSI3_TO,
+				LSI4_TO, LSI5_TO, LSI6_TO, LSI7_TO };
+
+#define SCYC_CTL		0x0170
+#define SCYC_ADDR		0x0174
+#define SCYC_EN			0x0178
+#define SCYC_CMP		0x017C
+#define SCYC_SWP		0x0180
+#define LMISC			0x0184
+#define SLSI		        0x0188
+#define L_CMDERR		0x018C
+#define LAERR		        0x0190
+
+#define DCTL		        0x0200
+#define DTBC		        0x0204
+#define DLA			0x0208
+#define DVA			0x0210
+#define DCPP		        0x0218
+#define DGCS		        0x0220
+#define D_LLUE			0x0224
+
+#define LINT_EN			0x0300
+#define LINT_STAT		0x0304
+#define LINT_MAP0		0x0308
+#define LINT_MAP1		0x030C
+#define VINT_EN			0x0310
+#define VINT_STAT		0x0314
+#define VINT_MAP0		0x0318
+#define VINT_MAP1		0x031C
+#define STATID			0x0320
+
+#define V1_STATID		0x0324
+#define V2_STATID		0x0328
+#define V3_STATID		0x032C
+#define V4_STATID		0x0330
+#define V5_STATID		0x0334
+#define V6_STATID		0x0338
+#define V7_STATID		0x033C
+
+static const int CA91CX42_V_STATID[8] = { 0, V1_STATID, V2_STATID, V3_STATID,
+					V4_STATID, V5_STATID, V6_STATID,
+					V7_STATID };
+
+#define LINT_MAP2		0x0340
+#define VINT_MAP2		0x0344
+
+#define MBOX0			0x0348
+#define MBOX1			0x034C
+#define MBOX2			0x0350
+#define MBOX3			0x0354
+#define SEMA0			0x0358
+#define SEMA1			0x035C
+
+#define MAST_CTL		0x0400
+#define MISC_CTL		0x0404
+#define MISC_STAT		0x0408
+#define USER_AM			0x040C
+
+#define VSI0_CTL		0x0F00
+#define VSI0_BS			0x0F04
+#define VSI0_BD			0x0F08
+#define VSI0_TO			0x0F0C
+
+#define VSI1_CTL		0x0F14
+#define VSI1_BS			0x0F18
+#define VSI1_BD			0x0F1C
+#define VSI1_TO			0x0F20
+
+#define VSI2_CTL		0x0F28
+#define VSI2_BS			0x0F2C
+#define VSI2_BD			0x0F30
+#define VSI2_TO			0x0F34
+
+#define VSI3_CTL		0x0F3C
+#define VSI3_BS			0x0F40
+#define VSI3_BD			0x0F44
+#define VSI3_TO			0x0F48
+
+#define LM_CTL			0x0F64
+#define LM_BS			0x0F68
+
+#define VRAI_CTL		0x0F70
+
+#define VRAI_BS			0x0F74
+#define VCSR_CTL		0x0F80
+#define VCSR_TO			0x0F84
+#define V_AMERR			0x0F88
+#define VAERR			0x0F8C
+
+#define VSI4_CTL		0x0F90
+#define VSI4_BS			0x0F94
+#define VSI4_BD			0x0F98
+#define VSI4_TO			0x0F9C
+
+#define VSI5_CTL		0x0FA4
+#define VSI5_BS			0x0FA8
+#define VSI5_BD			0x0FAC
+#define VSI5_TO			0x0FB0
+
+#define VSI6_CTL		0x0FB8
+#define VSI6_BS			0x0FBC
+#define VSI6_BD			0x0FC0
+#define VSI6_TO			0x0FC4
+
+#define VSI7_CTL		0x0FCC
+#define VSI7_BS			0x0FD0
+#define VSI7_BD			0x0FD4
+#define VSI7_TO			0x0FD8
+
+static const int CA91CX42_VSI_CTL[] = { VSI0_CTL, VSI1_CTL, VSI2_CTL, VSI3_CTL,
+				VSI4_CTL, VSI5_CTL, VSI6_CTL, VSI7_CTL };
+
+static const int CA91CX42_VSI_BS[] = { VSI0_BS, VSI1_BS, VSI2_BS, VSI3_BS,
+				VSI4_BS, VSI5_BS, VSI6_BS, VSI7_BS };
+
+static const int CA91CX42_VSI_BD[] = { VSI0_BD, VSI1_BD, VSI2_BD, VSI3_BD,
+				VSI4_BD, VSI5_BD, VSI6_BD, VSI7_BD };
+
+static const int CA91CX42_VSI_TO[] = { VSI0_TO, VSI1_TO, VSI2_TO, VSI3_TO,
+				VSI4_TO, VSI5_TO, VSI6_TO, VSI7_TO };
+
+#define VCSR_CLR		0x0FF4
+#define VCSR_SET		0x0FF8
+#define VCSR_BS			0x0FFC
+
+/*
+ * PCI Class Register
+ * offset 008
+ */
+#define CA91CX42_BM_PCI_CLASS_BASE          0xFF000000
+#define CA91CX42_OF_PCI_CLASS_BASE          24
+#define CA91CX42_BM_PCI_CLASS_SUB           0x00FF0000
+#define CA91CX42_OF_PCI_CLASS_SUB           16
+#define CA91CX42_BM_PCI_CLASS_PROG          0x0000FF00
+#define CA91CX42_OF_PCI_CLASS_PROG          8
+#define CA91CX42_BM_PCI_CLASS_RID           0x000000FF
+#define CA91CX42_OF_PCI_CLASS_RID           0
+
+#define CA91CX42_OF_PCI_CLASS_RID_UNIVERSE_I 0
+#define CA91CX42_OF_PCI_CLASS_RID_UNIVERSE_II 1
+
+/*
+ * PCI Misc Register
+ * offset 00C
+ */
+#define CA91CX42_BM_PCI_MISC0_BISTC         0x80000000
+#define CA91CX42_BM_PCI_MISC0_SBIST         0x60000000
+#define CA91CX42_BM_PCI_MISC0_CCODE         0x0F000000
+#define CA91CX42_BM_PCI_MISC0_MFUNCT        0x00800000
+#define CA91CX42_BM_PCI_MISC0_LAYOUT        0x007F0000
+#define CA91CX42_BM_PCI_MISC0_LTIMER        0x0000FF00
+#define CA91CX42_OF_PCI_MISC0_LTIMER        8
+
+
+/*
+ * LSI Control Register
+ * offset  100
+ */
+#define CA91CX42_LSI_CTL_EN		(1<<31)
+#define CA91CX42_LSI_CTL_PWEN		(1<<30)
+
+#define CA91CX42_LSI_CTL_VDW_M		(3<<22)
+#define CA91CX42_LSI_CTL_VDW_D8		0
+#define CA91CX42_LSI_CTL_VDW_D16	(1<<22)
+#define CA91CX42_LSI_CTL_VDW_D32	(1<<23)
+#define CA91CX42_LSI_CTL_VDW_D64	(3<<22)
+
+#define CA91CX42_LSI_CTL_VAS_M		(7<<16)
+#define CA91CX42_LSI_CTL_VAS_A16	0
+#define CA91CX42_LSI_CTL_VAS_A24	(1<<16)
+#define CA91CX42_LSI_CTL_VAS_A32	(1<<17)
+#define CA91CX42_LSI_CTL_VAS_CRCSR	(5<<16)
+#define CA91CX42_LSI_CTL_VAS_USER1	(3<<17)
+#define CA91CX42_LSI_CTL_VAS_USER2	(7<<16)
+
+#define CA91CX42_LSI_CTL_PGM_M		(1<<14)
+#define CA91CX42_LSI_CTL_PGM_DATA	0
+#define CA91CX42_LSI_CTL_PGM_PGM	(1<<14)
+
+#define CA91CX42_LSI_CTL_SUPER_M	(1<<12)
+#define CA91CX42_LSI_CTL_SUPER_NPRIV	0
+#define CA91CX42_LSI_CTL_SUPER_SUPR	(1<<12)
+
+#define CA91CX42_LSI_CTL_VCT_M		(1<<8)
+#define CA91CX42_LSI_CTL_VCT_BLT	(1<<8)
+#define CA91CX42_LSI_CTL_VCT_MBLT	(1<<8)
+#define CA91CX42_LSI_CTL_LAS		(1<<0)
+
+/*
+ * SCYC_CTL Register
+ * offset 178
+ */
+#define CA91CX42_SCYC_CTL_LAS_PCIMEM	0
+#define CA91CX42_SCYC_CTL_LAS_PCIIO	(1<<2)
+
+#define CA91CX42_SCYC_CTL_CYC_M		(3<<0)
+#define CA91CX42_SCYC_CTL_CYC_RMW	(1<<0)
+#define CA91CX42_SCYC_CTL_CYC_ADOH	(1<<1)
+
+/*
+ * LMISC Register
+ * offset  184
+ */
+#define CA91CX42_BM_LMISC_CRT               0xF0000000
+#define CA91CX42_OF_LMISC_CRT               28
+#define CA91CX42_BM_LMISC_CWT               0x0F000000
+#define CA91CX42_OF_LMISC_CWT               24
+
+/*
+ * SLSI Register
+ * offset  188
+ */
+#define CA91CX42_BM_SLSI_EN                 0x80000000
+#define CA91CX42_BM_SLSI_PWEN               0x40000000
+#define CA91CX42_BM_SLSI_VDW                0x00F00000
+#define CA91CX42_OF_SLSI_VDW                20
+#define CA91CX42_BM_SLSI_PGM                0x0000F000
+#define CA91CX42_OF_SLSI_PGM                12
+#define CA91CX42_BM_SLSI_SUPER              0x00000F00
+#define CA91CX42_OF_SLSI_SUPER              8
+#define CA91CX42_BM_SLSI_BS                 0x000000F6
+#define CA91CX42_OF_SLSI_BS                 2
+#define CA91CX42_BM_SLSI_LAS                0x00000003
+#define CA91CX42_OF_SLSI_LAS                0
+#define CA91CX42_BM_SLSI_RESERVED           0x3F0F0000
+
+/*
+ * DCTL Register
+ * offset 200
+ */
+#define CA91CX42_DCTL_L2V		(1<<31)
+#define CA91CX42_DCTL_VDW_M		(3<<22)
+#define CA91CX42_DCTL_VDW_D8		0
+#define CA91CX42_DCTL_VDW_D16		(1<<22)
+#define CA91CX42_DCTL_VDW_D32		(1<<23)
+#define CA91CX42_DCTL_VDW_D64		(3<<22)
+
+#define CA91CX42_DCTL_VAS_M		(7<<16)
+#define CA91CX42_DCTL_VAS_A16		0
+#define CA91CX42_DCTL_VAS_A24		(1<<16)
+#define CA91CX42_DCTL_VAS_A32		(1<<17)
+#define CA91CX42_DCTL_VAS_USER1		(3<<17)
+#define CA91CX42_DCTL_VAS_USER2		(7<<16)
+
+#define CA91CX42_DCTL_PGM_M		(1<<14)
+#define CA91CX42_DCTL_PGM_DATA		0
+#define CA91CX42_DCTL_PGM_PGM		(1<<14)
+
+#define CA91CX42_DCTL_SUPER_M		(1<<12)
+#define CA91CX42_DCTL_SUPER_NPRIV	0
+#define CA91CX42_DCTL_SUPER_SUPR	(1<<12)
+
+#define CA91CX42_DCTL_VCT_M		(1<<8)
+#define CA91CX42_DCTL_VCT_BLT		(1<<8)
+#define CA91CX42_DCTL_LD64EN		(1<<7)
+
+/*
+ * DCPP Register
+ * offset 218
+ */
+#define CA91CX42_DCPP_M			0xf
+#define CA91CX42_DCPP_NULL		(1<<0)
+
+/*
+ * DMA General Control/Status Register (DGCS)
+ * offset 220
+ */
+#define CA91CX42_DGCS_GO		(1<<31)
+#define CA91CX42_DGCS_STOP_REQ		(1<<30)
+#define CA91CX42_DGCS_HALT_REQ		(1<<29)
+#define CA91CX42_DGCS_CHAIN		(1<<27)
+
+#define CA91CX42_DGCS_VON_M		(7<<20)
+
+#define CA91CX42_DGCS_VOFF_M		(0xf<<16)
+
+#define CA91CX42_DGCS_ACT		(1<<15)
+#define CA91CX42_DGCS_STOP		(1<<14)
+#define CA91CX42_DGCS_HALT		(1<<13)
+#define CA91CX42_DGCS_DONE		(1<<11)
+#define CA91CX42_DGCS_LERR		(1<<10)
+#define CA91CX42_DGCS_VERR		(1<<9)
+#define CA91CX42_DGCS_PERR		(1<<8)
+#define CA91CX42_DGCS_INT_STOP		(1<<6)
+#define CA91CX42_DGCS_INT_HALT		(1<<5)
+#define CA91CX42_DGCS_INT_DONE		(1<<3)
+#define CA91CX42_DGCS_INT_LERR		(1<<2)
+#define CA91CX42_DGCS_INT_VERR		(1<<1)
+#define CA91CX42_DGCS_INT_PERR		(1<<0)
+
+/*
+ * PCI Interrupt Enable Register
+ * offset  300
+ */
+#define CA91CX42_LINT_LM3		0x00800000
+#define CA91CX42_LINT_LM2		0x00400000
+#define CA91CX42_LINT_LM1		0x00200000
+#define CA91CX42_LINT_LM0		0x00100000
+#define CA91CX42_LINT_MBOX3		0x00080000
+#define CA91CX42_LINT_MBOX2		0x00040000
+#define CA91CX42_LINT_MBOX1		0x00020000
+#define CA91CX42_LINT_MBOX0		0x00010000
+#define CA91CX42_LINT_ACFAIL		0x00008000
+#define CA91CX42_LINT_SYSFAIL		0x00004000
+#define CA91CX42_LINT_SW_INT		0x00002000
+#define CA91CX42_LINT_SW_IACK		0x00001000
+
+#define CA91CX42_LINT_VERR		0x00000400
+#define CA91CX42_LINT_LERR		0x00000200
+#define CA91CX42_LINT_DMA		0x00000100
+#define CA91CX42_LINT_VIRQ7		0x00000080
+#define CA91CX42_LINT_VIRQ6		0x00000040
+#define CA91CX42_LINT_VIRQ5		0x00000020
+#define CA91CX42_LINT_VIRQ4		0x00000010
+#define CA91CX42_LINT_VIRQ3		0x00000008
+#define CA91CX42_LINT_VIRQ2		0x00000004
+#define CA91CX42_LINT_VIRQ1		0x00000002
+#define CA91CX42_LINT_VOWN		0x00000001
+
+static const int CA91CX42_LINT_VIRQ[] = { 0, CA91CX42_LINT_VIRQ1,
+				CA91CX42_LINT_VIRQ2, CA91CX42_LINT_VIRQ3,
+				CA91CX42_LINT_VIRQ4, CA91CX42_LINT_VIRQ5,
+				CA91CX42_LINT_VIRQ6, CA91CX42_LINT_VIRQ7 };
+
+#define CA91CX42_LINT_MBOX		0x000F0000
+
+static const int CA91CX42_LINT_LM[] = { CA91CX42_LINT_LM0, CA91CX42_LINT_LM1,
+					CA91CX42_LINT_LM2, CA91CX42_LINT_LM3 };
+
+/*
+ * MAST_CTL Register
+ * offset  400
+ */
+#define CA91CX42_BM_MAST_CTL_MAXRTRY        0xF0000000
+#define CA91CX42_OF_MAST_CTL_MAXRTRY        28
+#define CA91CX42_BM_MAST_CTL_PWON           0x0F000000
+#define CA91CX42_OF_MAST_CTL_PWON           24
+#define CA91CX42_BM_MAST_CTL_VRL            0x00C00000
+#define CA91CX42_OF_MAST_CTL_VRL            22
+#define CA91CX42_BM_MAST_CTL_VRM            0x00200000
+#define CA91CX42_BM_MAST_CTL_VREL           0x00100000
+#define CA91CX42_BM_MAST_CTL_VOWN           0x00080000
+#define CA91CX42_BM_MAST_CTL_VOWN_ACK       0x00040000
+#define CA91CX42_BM_MAST_CTL_PABS           0x00001000
+#define CA91CX42_BM_MAST_CTL_BUS_NO         0x0000000F
+#define CA91CX42_OF_MAST_CTL_BUS_NO         0
+
+/*
+ * MISC_CTL Register
+ * offset  404
+ */
+#define CA91CX42_MISC_CTL_VBTO           0xF0000000
+#define CA91CX42_MISC_CTL_VARB           0x04000000
+#define CA91CX42_MISC_CTL_VARBTO         0x03000000
+#define CA91CX42_MISC_CTL_SW_LRST        0x00800000
+#define CA91CX42_MISC_CTL_SW_SRST        0x00400000
+#define CA91CX42_MISC_CTL_BI             0x00100000
+#define CA91CX42_MISC_CTL_ENGBI          0x00080000
+#define CA91CX42_MISC_CTL_RESCIND        0x00040000
+#define CA91CX42_MISC_CTL_SYSCON         0x00020000
+#define CA91CX42_MISC_CTL_V64AUTO        0x00010000
+#define CA91CX42_MISC_CTL_RESERVED       0x0820FFFF
+
+#define CA91CX42_OF_MISC_CTL_VARBTO         24
+#define CA91CX42_OF_MISC_CTL_VBTO           28
+
+/*
+ * MISC_STAT Register
+ * offset  408
+ */
+#define CA91CX42_BM_MISC_STAT_ENDIAN        0x80000000
+#define CA91CX42_BM_MISC_STAT_LCLSIZE       0x40000000
+#define CA91CX42_BM_MISC_STAT_DY4AUTO       0x08000000
+#define CA91CX42_BM_MISC_STAT_MYBBSY        0x00200000
+#define CA91CX42_BM_MISC_STAT_DY4DONE       0x00080000
+#define CA91CX42_BM_MISC_STAT_TXFE          0x00040000
+#define CA91CX42_BM_MISC_STAT_RXFE          0x00020000
+#define CA91CX42_BM_MISC_STAT_DY4AUTOID     0x0000FF00
+#define CA91CX42_OF_MISC_STAT_DY4AUTOID     8
+
+/*
+ * VSI Control Register
+ * offset  F00
+ */
+#define CA91CX42_VSI_CTL_EN		(1<<31)
+#define CA91CX42_VSI_CTL_PWEN		(1<<30)
+#define CA91CX42_VSI_CTL_PREN		(1<<29)
+
+#define CA91CX42_VSI_CTL_PGM_M		(3<<22)
+#define CA91CX42_VSI_CTL_PGM_DATA	(1<<22)
+#define CA91CX42_VSI_CTL_PGM_PGM	(1<<23)
+
+#define CA91CX42_VSI_CTL_SUPER_M	(3<<20)
+#define CA91CX42_VSI_CTL_SUPER_NPRIV	(1<<20)
+#define CA91CX42_VSI_CTL_SUPER_SUPR	(1<<21)
+
+#define CA91CX42_VSI_CTL_VAS_M		(7<<16)
+#define CA91CX42_VSI_CTL_VAS_A16	0
+#define CA91CX42_VSI_CTL_VAS_A24	(1<<16)
+#define CA91CX42_VSI_CTL_VAS_A32	(1<<17)
+#define CA91CX42_VSI_CTL_VAS_USER1	(3<<17)
+#define CA91CX42_VSI_CTL_VAS_USER2	(7<<16)
+
+#define CA91CX42_VSI_CTL_LD64EN		(1<<7)
+#define CA91CX42_VSI_CTL_LLRMW		(1<<6)
+
+#define CA91CX42_VSI_CTL_LAS_M		(3<<0)
+#define CA91CX42_VSI_CTL_LAS_PCI_MS	0
+#define CA91CX42_VSI_CTL_LAS_PCI_IO	(1<<0)
+#define CA91CX42_VSI_CTL_LAS_PCI_CONF	(1<<1)
+
+/* LM_CTL Register
+ * offset  F64
+ */
+#define CA91CX42_LM_CTL_EN		(1<<31)
+#define CA91CX42_LM_CTL_PGM		(1<<23)
+#define CA91CX42_LM_CTL_DATA		(1<<22)
+#define CA91CX42_LM_CTL_SUPR		(1<<21)
+#define CA91CX42_LM_CTL_NPRIV		(1<<20)
+#define CA91CX42_LM_CTL_AS_M		(7<<16)
+#define CA91CX42_LM_CTL_AS_A16		0
+#define CA91CX42_LM_CTL_AS_A24		(1<<16)
+#define CA91CX42_LM_CTL_AS_A32		(1<<17)
+
+/*
+ * VRAI_CTL Register
+ * offset  F70
+ */
+#define CA91CX42_BM_VRAI_CTL_EN             0x80000000
+#define CA91CX42_BM_VRAI_CTL_PGM            0x00C00000
+#define CA91CX42_OF_VRAI_CTL_PGM            22
+#define CA91CX42_BM_VRAI_CTL_SUPER          0x00300000
+#define CA91CX42_OF_VRAI_CTL_SUPER          20
+#define CA91CX42_BM_VRAI_CTL_VAS            0x00030000
+#define CA91CX42_OF_VRAI_CTL_VAS            16
+
+/* VCSR_CTL Register
+ * offset F80
+ */
+#define CA91CX42_VCSR_CTL_EN		(1<<31)
+
+#define CA91CX42_VCSR_CTL_LAS_M		(3<<0)
+#define CA91CX42_VCSR_CTL_LAS_PCI_MS	0
+#define CA91CX42_VCSR_CTL_LAS_PCI_IO	(1<<0)
+#define CA91CX42_VCSR_CTL_LAS_PCI_CONF	(1<<1)
+
+/* VCSR_BS Register
+ * offset FFC
+ */
+#define CA91CX42_VCSR_BS_SLOT_M		(0x1F<<27)
+
+#endif /* _CA91CX42_H */
diff --git a/drivers/vme/bridges/vme_fake.c b/drivers/vme/bridges/vme_fake.c
new file mode 100644
index 000000000..eae78366e
--- /dev/null
+++ b/drivers/vme/bridges/vme_fake.c
@@ -0,0 +1,1307 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Fake VME bridge support.
+ *
+ * This drive provides a fake VME bridge chip, this enables debugging of the
+ * VME framework in the absence of a VME system.
+ *
+ * This driver has to do a number of things in software that would be driven
+ * by hardware if it was available, it will also result in extra overhead at
+ * times when compared with driving actual hardware.
+ *
+ * Author: Martyn Welch <martyn@welches.me.uk>
+ * Copyright (c) 2014 Martyn Welch
+ *
+ * Based on vme_tsi148.c:
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on work by Tom Armistead and Ajit Prem
+ * Copyright 2004 Motorola Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/vme.h>
+
+#include "../vme_bridge.h"
+
+/*
+ *  Define the number of each that the fake driver supports.
+ */
+#define FAKE_MAX_MASTER		8	/* Max Master Windows */
+#define FAKE_MAX_SLAVE		8	/* Max Slave Windows */
+
+/* Structures to hold information normally held in device registers */
+struct fake_slave_window {
+	int enabled;
+	unsigned long long vme_base;
+	unsigned long long size;
+	void *buf_base;
+	u32 aspace;
+	u32 cycle;
+};
+
+struct fake_master_window {
+	int enabled;
+	unsigned long long vme_base;
+	unsigned long long size;
+	u32 aspace;
+	u32 cycle;
+	u32 dwidth;
+};
+
+/* Structure used to hold driver specific information */
+struct fake_driver {
+	struct vme_bridge *parent;
+	struct fake_slave_window slaves[FAKE_MAX_SLAVE];
+	struct fake_master_window masters[FAKE_MAX_MASTER];
+	u32 lm_enabled;
+	unsigned long long lm_base;
+	u32 lm_aspace;
+	u32 lm_cycle;
+	void (*lm_callback[4])(void *);
+	void *lm_data[4];
+	struct tasklet_struct int_tasklet;
+	int int_level;
+	int int_statid;
+	void *crcsr_kernel;
+	dma_addr_t crcsr_bus;
+	/* Only one VME interrupt can be generated at a time, provide locking */
+	struct mutex vme_int;
+};
+
+/* Module parameter */
+static int geoid;
+
+static const char driver_name[] = "vme_fake";
+
+static struct vme_bridge *exit_pointer;
+
+static struct device *vme_root;
+
+/*
+ * Calling VME bus interrupt callback if provided.
+ */
+static void fake_VIRQ_tasklet(unsigned long data)
+{
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *bridge;
+
+	fake_bridge = (struct vme_bridge *) data;
+	bridge = fake_bridge->driver_priv;
+
+	vme_irq_handler(fake_bridge, bridge->int_level, bridge->int_statid);
+}
+
+/*
+ * Configure VME interrupt
+ */
+static void fake_irq_set(struct vme_bridge *fake_bridge, int level,
+		int state, int sync)
+{
+	/* Nothing to do */
+}
+
+static void *fake_pci_to_ptr(dma_addr_t addr)
+{
+	return (void *)(uintptr_t)addr;
+}
+
+static dma_addr_t fake_ptr_to_pci(void *addr)
+{
+	return (dma_addr_t)(uintptr_t)addr;
+}
+
+/*
+ * Generate a VME bus interrupt at the requested level & vector. Wait for
+ * interrupt to be acked.
+ */
+static int fake_irq_generate(struct vme_bridge *fake_bridge, int level,
+		int statid)
+{
+	struct fake_driver *bridge;
+
+	bridge = fake_bridge->driver_priv;
+
+	mutex_lock(&bridge->vme_int);
+
+	bridge->int_level = level;
+
+	bridge->int_statid = statid;
+
+	/*
+	 * Schedule tasklet to run VME handler to emulate normal VME interrupt
+	 * handler behaviour.
+	 */
+	tasklet_schedule(&bridge->int_tasklet);
+
+	mutex_unlock(&bridge->vme_int);
+
+	return 0;
+}
+
+/*
+ * Initialize a slave window with the requested attributes.
+ */
+static int fake_slave_set(struct vme_slave_resource *image, int enabled,
+		unsigned long long vme_base, unsigned long long size,
+		dma_addr_t buf_base, u32 aspace, u32 cycle)
+{
+	unsigned int i, granularity = 0;
+	unsigned long long vme_bound;
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *bridge;
+
+	fake_bridge = image->parent;
+	bridge = fake_bridge->driver_priv;
+
+	i = image->number;
+
+	switch (aspace) {
+	case VME_A16:
+		granularity = 0x10;
+		break;
+	case VME_A24:
+		granularity = 0x1000;
+		break;
+	case VME_A32:
+		granularity = 0x10000;
+		break;
+	case VME_A64:
+		granularity = 0x10000;
+		break;
+	case VME_CRCSR:
+	case VME_USER1:
+	case VME_USER2:
+	case VME_USER3:
+	case VME_USER4:
+	default:
+		pr_err("Invalid address space\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Bound address is a valid address for the window, adjust
+	 * accordingly
+	 */
+	vme_bound = vme_base + size - granularity;
+
+	if (vme_base & (granularity - 1)) {
+		pr_err("Invalid VME base alignment\n");
+		return -EINVAL;
+	}
+	if (vme_bound & (granularity - 1)) {
+		pr_err("Invalid VME bound alignment\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&image->mtx);
+
+	bridge->slaves[i].enabled = enabled;
+	bridge->slaves[i].vme_base = vme_base;
+	bridge->slaves[i].size = size;
+	bridge->slaves[i].buf_base = fake_pci_to_ptr(buf_base);
+	bridge->slaves[i].aspace = aspace;
+	bridge->slaves[i].cycle = cycle;
+
+	mutex_unlock(&image->mtx);
+
+	return 0;
+}
+
+/*
+ * Get slave window configuration.
+ */
+static int fake_slave_get(struct vme_slave_resource *image, int *enabled,
+		unsigned long long *vme_base, unsigned long long *size,
+		dma_addr_t *buf_base, u32 *aspace, u32 *cycle)
+{
+	unsigned int i;
+	struct fake_driver *bridge;
+
+	bridge = image->parent->driver_priv;
+
+	i = image->number;
+
+	mutex_lock(&image->mtx);
+
+	*enabled = bridge->slaves[i].enabled;
+	*vme_base = bridge->slaves[i].vme_base;
+	*size = bridge->slaves[i].size;
+	*buf_base = fake_ptr_to_pci(bridge->slaves[i].buf_base);
+	*aspace = bridge->slaves[i].aspace;
+	*cycle = bridge->slaves[i].cycle;
+
+	mutex_unlock(&image->mtx);
+
+	return 0;
+}
+
+/*
+ * Set the attributes of an outbound window.
+ */
+static int fake_master_set(struct vme_master_resource *image, int enabled,
+		unsigned long long vme_base, unsigned long long size,
+		u32 aspace, u32 cycle, u32 dwidth)
+{
+	int retval = 0;
+	unsigned int i;
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *bridge;
+
+	fake_bridge = image->parent;
+
+	bridge = fake_bridge->driver_priv;
+
+	/* Verify input data */
+	if (vme_base & 0xFFFF) {
+		pr_err("Invalid VME Window alignment\n");
+		retval = -EINVAL;
+		goto err_window;
+	}
+
+	if (size & 0xFFFF) {
+		pr_err("Invalid size alignment\n");
+		retval = -EINVAL;
+		goto err_window;
+	}
+
+	if ((size == 0) && (enabled != 0)) {
+		pr_err("Size must be non-zero for enabled windows\n");
+		retval = -EINVAL;
+		goto err_window;
+	}
+
+	/* Setup data width */
+	switch (dwidth) {
+	case VME_D8:
+	case VME_D16:
+	case VME_D32:
+		break;
+	default:
+		pr_err("Invalid data width\n");
+		retval = -EINVAL;
+		goto err_dwidth;
+	}
+
+	/* Setup address space */
+	switch (aspace) {
+	case VME_A16:
+	case VME_A24:
+	case VME_A32:
+	case VME_A64:
+	case VME_CRCSR:
+	case VME_USER1:
+	case VME_USER2:
+	case VME_USER3:
+	case VME_USER4:
+		break;
+	default:
+		pr_err("Invalid address space\n");
+		retval = -EINVAL;
+		goto err_aspace;
+	}
+
+	spin_lock(&image->lock);
+
+	i = image->number;
+
+	bridge->masters[i].enabled = enabled;
+	bridge->masters[i].vme_base = vme_base;
+	bridge->masters[i].size = size;
+	bridge->masters[i].aspace = aspace;
+	bridge->masters[i].cycle = cycle;
+	bridge->masters[i].dwidth = dwidth;
+
+	spin_unlock(&image->lock);
+
+	return 0;
+
+err_aspace:
+err_dwidth:
+err_window:
+	return retval;
+
+}
+
+/*
+ * Set the attributes of an outbound window.
+ */
+static int __fake_master_get(struct vme_master_resource *image, int *enabled,
+		unsigned long long *vme_base, unsigned long long *size,
+		u32 *aspace, u32 *cycle, u32 *dwidth)
+{
+	unsigned int i;
+	struct fake_driver *bridge;
+
+	bridge = image->parent->driver_priv;
+
+	i = image->number;
+
+	*enabled = bridge->masters[i].enabled;
+	*vme_base = bridge->masters[i].vme_base;
+	*size = bridge->masters[i].size;
+	*aspace = bridge->masters[i].aspace;
+	*cycle = bridge->masters[i].cycle;
+	*dwidth = bridge->masters[i].dwidth;
+
+	return 0;
+}
+
+
+static int fake_master_get(struct vme_master_resource *image, int *enabled,
+		unsigned long long *vme_base, unsigned long long *size,
+		u32 *aspace, u32 *cycle, u32 *dwidth)
+{
+	int retval;
+
+	spin_lock(&image->lock);
+
+	retval = __fake_master_get(image, enabled, vme_base, size, aspace,
+			cycle, dwidth);
+
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+
+static void fake_lm_check(struct fake_driver *bridge, unsigned long long addr,
+			  u32 aspace, u32 cycle)
+{
+	struct vme_bridge *fake_bridge;
+	unsigned long long lm_base;
+	u32 lm_aspace, lm_cycle;
+	int i;
+	struct vme_lm_resource *lm;
+	struct list_head *pos = NULL, *n;
+
+	/* Get vme_bridge */
+	fake_bridge = bridge->parent;
+
+	/* Loop through each location monitor resource */
+	list_for_each_safe(pos, n, &fake_bridge->lm_resources) {
+		lm = list_entry(pos, struct vme_lm_resource, list);
+
+		/* If disabled, we're done */
+		if (bridge->lm_enabled == 0)
+			return;
+
+		lm_base = bridge->lm_base;
+		lm_aspace = bridge->lm_aspace;
+		lm_cycle = bridge->lm_cycle;
+
+		/* First make sure that the cycle and address space match */
+		if ((lm_aspace == aspace) && (lm_cycle == cycle)) {
+			for (i = 0; i < lm->monitors; i++) {
+				/* Each location monitor covers 8 bytes */
+				if (((lm_base + (8 * i)) <= addr) &&
+				    ((lm_base + (8 * i) + 8) > addr)) {
+					if (bridge->lm_callback[i])
+						bridge->lm_callback[i](
+							bridge->lm_data[i]);
+				}
+			}
+		}
+	}
+}
+
+static noinline_for_stack u8 fake_vmeread8(struct fake_driver *bridge,
+					   unsigned long long addr,
+					   u32 aspace, u32 cycle)
+{
+	u8 retval = 0xff;
+	int i;
+	unsigned long long start, end, offset;
+	u8 *loc;
+
+	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
+		start = bridge->slaves[i].vme_base;
+		end = bridge->slaves[i].vme_base + bridge->slaves[i].size;
+
+		if (aspace != bridge->slaves[i].aspace)
+			continue;
+
+		if (cycle != bridge->slaves[i].cycle)
+			continue;
+
+		if ((addr >= start) && (addr < end)) {
+			offset = addr - bridge->slaves[i].vme_base;
+			loc = (u8 *)(bridge->slaves[i].buf_base + offset);
+			retval = *loc;
+
+			break;
+		}
+	}
+
+	fake_lm_check(bridge, addr, aspace, cycle);
+
+	return retval;
+}
+
+static noinline_for_stack u16 fake_vmeread16(struct fake_driver *bridge,
+					     unsigned long long addr,
+					     u32 aspace, u32 cycle)
+{
+	u16 retval = 0xffff;
+	int i;
+	unsigned long long start, end, offset;
+	u16 *loc;
+
+	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
+		if (aspace != bridge->slaves[i].aspace)
+			continue;
+
+		if (cycle != bridge->slaves[i].cycle)
+			continue;
+
+		start = bridge->slaves[i].vme_base;
+		end = bridge->slaves[i].vme_base + bridge->slaves[i].size;
+
+		if ((addr >= start) && ((addr + 1) < end)) {
+			offset = addr - bridge->slaves[i].vme_base;
+			loc = (u16 *)(bridge->slaves[i].buf_base + offset);
+			retval = *loc;
+
+			break;
+		}
+	}
+
+	fake_lm_check(bridge, addr, aspace, cycle);
+
+	return retval;
+}
+
+static noinline_for_stack u32 fake_vmeread32(struct fake_driver *bridge,
+					     unsigned long long addr,
+					     u32 aspace, u32 cycle)
+{
+	u32 retval = 0xffffffff;
+	int i;
+	unsigned long long start, end, offset;
+	u32 *loc;
+
+	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
+		if (aspace != bridge->slaves[i].aspace)
+			continue;
+
+		if (cycle != bridge->slaves[i].cycle)
+			continue;
+
+		start = bridge->slaves[i].vme_base;
+		end = bridge->slaves[i].vme_base + bridge->slaves[i].size;
+
+		if ((addr >= start) && ((addr + 3) < end)) {
+			offset = addr - bridge->slaves[i].vme_base;
+			loc = (u32 *)(bridge->slaves[i].buf_base + offset);
+			retval = *loc;
+
+			break;
+		}
+	}
+
+	fake_lm_check(bridge, addr, aspace, cycle);
+
+	return retval;
+}
+
+static ssize_t fake_master_read(struct vme_master_resource *image, void *buf,
+		size_t count, loff_t offset)
+{
+	int retval;
+	u32 aspace, cycle, dwidth;
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *priv;
+	int i;
+	unsigned long long addr;
+	unsigned int done = 0;
+	unsigned int count32;
+
+	fake_bridge = image->parent;
+
+	priv = fake_bridge->driver_priv;
+
+	i = image->number;
+
+	addr = (unsigned long long)priv->masters[i].vme_base + offset;
+	aspace = priv->masters[i].aspace;
+	cycle = priv->masters[i].cycle;
+	dwidth = priv->masters[i].dwidth;
+
+	spin_lock(&image->lock);
+
+	/* The following code handles VME address alignment. We cannot use
+	 * memcpy_xxx here because it may cut data transfers in to 8-bit
+	 * cycles when D16 or D32 cycles are required on the VME bus.
+	 * On the other hand, the bridge itself assures that the maximum data
+	 * cycle configured for the transfer is used and splits it
+	 * automatically for non-aligned addresses, so we don't want the
+	 * overhead of needlessly forcing small transfers for the entire cycle.
+	 */
+	if (addr & 0x1) {
+		*(u8 *)buf = fake_vmeread8(priv, addr, aspace, cycle);
+		done += 1;
+		if (done == count)
+			goto out;
+	}
+	if ((dwidth == VME_D16) || (dwidth == VME_D32)) {
+		if ((addr + done) & 0x2) {
+			if ((count - done) < 2) {
+				*(u8 *)(buf + done) = fake_vmeread8(priv,
+						addr + done, aspace, cycle);
+				done += 1;
+				goto out;
+			} else {
+				*(u16 *)(buf + done) = fake_vmeread16(priv,
+						addr + done, aspace, cycle);
+				done += 2;
+			}
+		}
+	}
+
+	if (dwidth == VME_D32) {
+		count32 = (count - done) & ~0x3;
+		while (done < count32) {
+			*(u32 *)(buf + done) = fake_vmeread32(priv, addr + done,
+					aspace, cycle);
+			done += 4;
+		}
+	} else if (dwidth == VME_D16) {
+		count32 = (count - done) & ~0x3;
+		while (done < count32) {
+			*(u16 *)(buf + done) = fake_vmeread16(priv, addr + done,
+					aspace, cycle);
+			done += 2;
+		}
+	} else if (dwidth == VME_D8) {
+		count32 = (count - done);
+		while (done < count32) {
+			*(u8 *)(buf + done) = fake_vmeread8(priv, addr + done,
+					aspace, cycle);
+			done += 1;
+		}
+
+	}
+
+	if ((dwidth == VME_D16) || (dwidth == VME_D32)) {
+		if ((count - done) & 0x2) {
+			*(u16 *)(buf + done) = fake_vmeread16(priv, addr + done,
+					aspace, cycle);
+			done += 2;
+		}
+	}
+	if ((count - done) & 0x1) {
+		*(u8 *)(buf + done) = fake_vmeread8(priv, addr + done, aspace,
+				cycle);
+		done += 1;
+	}
+
+out:
+	retval = count;
+
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+static noinline_for_stack void fake_vmewrite8(struct fake_driver *bridge,
+					      u8 *buf, unsigned long long addr,
+					      u32 aspace, u32 cycle)
+{
+	int i;
+	unsigned long long start, end, offset;
+	u8 *loc;
+
+	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
+		if (aspace != bridge->slaves[i].aspace)
+			continue;
+
+		if (cycle != bridge->slaves[i].cycle)
+			continue;
+
+		start = bridge->slaves[i].vme_base;
+		end = bridge->slaves[i].vme_base + bridge->slaves[i].size;
+
+		if ((addr >= start) && (addr < end)) {
+			offset = addr - bridge->slaves[i].vme_base;
+			loc = (u8 *)((void *)bridge->slaves[i].buf_base + offset);
+			*loc = *buf;
+
+			break;
+		}
+	}
+
+	fake_lm_check(bridge, addr, aspace, cycle);
+
+}
+
+static noinline_for_stack void fake_vmewrite16(struct fake_driver *bridge,
+					       u16 *buf, unsigned long long addr,
+					       u32 aspace, u32 cycle)
+{
+	int i;
+	unsigned long long start, end, offset;
+	u16 *loc;
+
+	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
+		if (aspace != bridge->slaves[i].aspace)
+			continue;
+
+		if (cycle != bridge->slaves[i].cycle)
+			continue;
+
+		start = bridge->slaves[i].vme_base;
+		end = bridge->slaves[i].vme_base + bridge->slaves[i].size;
+
+		if ((addr >= start) && ((addr + 1) < end)) {
+			offset = addr - bridge->slaves[i].vme_base;
+			loc = (u16 *)((void *)bridge->slaves[i].buf_base + offset);
+			*loc = *buf;
+
+			break;
+		}
+	}
+
+	fake_lm_check(bridge, addr, aspace, cycle);
+
+}
+
+static noinline_for_stack void fake_vmewrite32(struct fake_driver *bridge,
+					       u32 *buf, unsigned long long addr,
+					       u32 aspace, u32 cycle)
+{
+	int i;
+	unsigned long long start, end, offset;
+	u32 *loc;
+
+	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
+		if (aspace != bridge->slaves[i].aspace)
+			continue;
+
+		if (cycle != bridge->slaves[i].cycle)
+			continue;
+
+		start = bridge->slaves[i].vme_base;
+		end = bridge->slaves[i].vme_base + bridge->slaves[i].size;
+
+		if ((addr >= start) && ((addr + 3) < end)) {
+			offset = addr - bridge->slaves[i].vme_base;
+			loc = (u32 *)((void *)bridge->slaves[i].buf_base + offset);
+			*loc = *buf;
+
+			break;
+		}
+	}
+
+	fake_lm_check(bridge, addr, aspace, cycle);
+
+}
+
+static ssize_t fake_master_write(struct vme_master_resource *image, void *buf,
+		size_t count, loff_t offset)
+{
+	int retval = 0;
+	u32 aspace, cycle, dwidth;
+	unsigned long long addr;
+	int i;
+	unsigned int done = 0;
+	unsigned int count32;
+
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *bridge;
+
+	fake_bridge = image->parent;
+
+	bridge = fake_bridge->driver_priv;
+
+	i = image->number;
+
+	addr = bridge->masters[i].vme_base + offset;
+	aspace = bridge->masters[i].aspace;
+	cycle = bridge->masters[i].cycle;
+	dwidth = bridge->masters[i].dwidth;
+
+	spin_lock(&image->lock);
+
+	/* Here we apply for the same strategy we do in master_read
+	 * function in order to assure the correct cycles.
+	 */
+	if (addr & 0x1) {
+		fake_vmewrite8(bridge, (u8 *)buf, addr, aspace, cycle);
+		done += 1;
+		if (done == count)
+			goto out;
+	}
+
+	if ((dwidth == VME_D16) || (dwidth == VME_D32)) {
+		if ((addr + done) & 0x2) {
+			if ((count - done) < 2) {
+				fake_vmewrite8(bridge, (u8 *)(buf + done),
+						addr + done, aspace, cycle);
+				done += 1;
+				goto out;
+			} else {
+				fake_vmewrite16(bridge, (u16 *)(buf + done),
+						addr + done, aspace, cycle);
+				done += 2;
+			}
+		}
+	}
+
+	if (dwidth == VME_D32) {
+		count32 = (count - done) & ~0x3;
+		while (done < count32) {
+			fake_vmewrite32(bridge, (u32 *)(buf + done),
+					addr + done, aspace, cycle);
+			done += 4;
+		}
+	} else if (dwidth == VME_D16) {
+		count32 = (count - done) & ~0x3;
+		while (done < count32) {
+			fake_vmewrite16(bridge, (u16 *)(buf + done),
+					addr + done, aspace, cycle);
+			done += 2;
+		}
+	} else if (dwidth == VME_D8) {
+		count32 = (count - done);
+		while (done < count32) {
+			fake_vmewrite8(bridge, (u8 *)(buf + done), addr + done,
+					aspace, cycle);
+			done += 1;
+		}
+
+	}
+
+	if ((dwidth == VME_D16) || (dwidth == VME_D32)) {
+		if ((count - done) & 0x2) {
+			fake_vmewrite16(bridge, (u16 *)(buf + done),
+					addr + done, aspace, cycle);
+			done += 2;
+		}
+	}
+
+	if ((count - done) & 0x1) {
+		fake_vmewrite8(bridge, (u8 *)(buf + done), addr + done, aspace,
+				cycle);
+		done += 1;
+	}
+
+out:
+	retval = count;
+
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+/*
+ * Perform an RMW cycle on the VME bus.
+ *
+ * Requires a previously configured master window, returns final value.
+ */
+static unsigned int fake_master_rmw(struct vme_master_resource *image,
+		unsigned int mask, unsigned int compare, unsigned int swap,
+		loff_t offset)
+{
+	u32 tmp, base;
+	u32 aspace, cycle;
+	int i;
+	struct fake_driver *bridge;
+
+	bridge = image->parent->driver_priv;
+
+	/* Find the PCI address that maps to the desired VME address */
+	i = image->number;
+
+	base = bridge->masters[i].vme_base;
+	aspace = bridge->masters[i].aspace;
+	cycle = bridge->masters[i].cycle;
+
+	/* Lock image */
+	spin_lock(&image->lock);
+
+	/* Read existing value */
+	tmp = fake_vmeread32(bridge, base + offset, aspace, cycle);
+
+	/* Perform check */
+	if ((tmp && mask) == (compare && mask)) {
+		tmp = tmp | (mask | swap);
+		tmp = tmp & (~mask | swap);
+
+		/* Write back */
+		fake_vmewrite32(bridge, &tmp, base + offset, aspace, cycle);
+	}
+
+	/* Unlock image */
+	spin_unlock(&image->lock);
+
+	return tmp;
+}
+
+/*
+ * All 4 location monitors reside at the same base - this is therefore a
+ * system wide configuration.
+ *
+ * This does not enable the LM monitor - that should be done when the first
+ * callback is attached and disabled when the last callback is removed.
+ */
+static int fake_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base,
+		u32 aspace, u32 cycle)
+{
+	int i;
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *bridge;
+
+	fake_bridge = lm->parent;
+
+	bridge = fake_bridge->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	/* If we already have a callback attached, we can't move it! */
+	for (i = 0; i < lm->monitors; i++) {
+		if (bridge->lm_callback[i]) {
+			mutex_unlock(&lm->mtx);
+			pr_err("Location monitor callback attached, can't reset\n");
+			return -EBUSY;
+		}
+	}
+
+	switch (aspace) {
+	case VME_A16:
+	case VME_A24:
+	case VME_A32:
+	case VME_A64:
+		break;
+	default:
+		mutex_unlock(&lm->mtx);
+		pr_err("Invalid address space\n");
+		return -EINVAL;
+	}
+
+	bridge->lm_base = lm_base;
+	bridge->lm_aspace = aspace;
+	bridge->lm_cycle = cycle;
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+/* Get configuration of the callback monitor and return whether it is enabled
+ * or disabled.
+ */
+static int fake_lm_get(struct vme_lm_resource *lm,
+		unsigned long long *lm_base, u32 *aspace, u32 *cycle)
+{
+	struct fake_driver *bridge;
+
+	bridge = lm->parent->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	*lm_base = bridge->lm_base;
+	*aspace = bridge->lm_aspace;
+	*cycle = bridge->lm_cycle;
+
+	mutex_unlock(&lm->mtx);
+
+	return bridge->lm_enabled;
+}
+
+/*
+ * Attach a callback to a specific location monitor.
+ *
+ * Callback will be passed the monitor triggered.
+ */
+static int fake_lm_attach(struct vme_lm_resource *lm, int monitor,
+		void (*callback)(void *), void *data)
+{
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *bridge;
+
+	fake_bridge = lm->parent;
+
+	bridge = fake_bridge->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	/* Ensure that the location monitor is configured - need PGM or DATA */
+	if (bridge->lm_cycle == 0) {
+		mutex_unlock(&lm->mtx);
+		pr_err("Location monitor not properly configured\n");
+		return -EINVAL;
+	}
+
+	/* Check that a callback isn't already attached */
+	if (bridge->lm_callback[monitor]) {
+		mutex_unlock(&lm->mtx);
+		pr_err("Existing callback attached\n");
+		return -EBUSY;
+	}
+
+	/* Attach callback */
+	bridge->lm_callback[monitor] = callback;
+	bridge->lm_data[monitor] = data;
+
+	/* Ensure that global Location Monitor Enable set */
+	bridge->lm_enabled = 1;
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+/*
+ * Detach a callback function forn a specific location monitor.
+ */
+static int fake_lm_detach(struct vme_lm_resource *lm, int monitor)
+{
+	u32 tmp;
+	int i;
+	struct fake_driver *bridge;
+
+	bridge = lm->parent->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	/* Detach callback */
+	bridge->lm_callback[monitor] = NULL;
+	bridge->lm_data[monitor] = NULL;
+
+	/* If all location monitors disabled, disable global Location Monitor */
+	tmp = 0;
+	for (i = 0; i < lm->monitors; i++) {
+		if (bridge->lm_callback[i])
+			tmp = 1;
+	}
+
+	if (tmp == 0)
+		bridge->lm_enabled = 0;
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+/*
+ * Determine Geographical Addressing
+ */
+static int fake_slot_get(struct vme_bridge *fake_bridge)
+{
+	return geoid;
+}
+
+static void *fake_alloc_consistent(struct device *parent, size_t size,
+		dma_addr_t *dma)
+{
+	void *alloc = kmalloc(size, GFP_KERNEL);
+
+	if (alloc)
+		*dma = fake_ptr_to_pci(alloc);
+
+	return alloc;
+}
+
+static void fake_free_consistent(struct device *parent, size_t size,
+		void *vaddr, dma_addr_t dma)
+{
+	kfree(vaddr);
+/*
+	dma_free_coherent(parent, size, vaddr, dma);
+*/
+}
+
+/*
+ * Configure CR/CSR space
+ *
+ * Access to the CR/CSR can be configured at power-up. The location of the
+ * CR/CSR registers in the CR/CSR address space is determined by the boards
+ * Geographic address.
+ *
+ * Each board has a 512kB window, with the highest 4kB being used for the
+ * boards registers, this means there is a fix length 508kB window which must
+ * be mapped onto PCI memory.
+ */
+static int fake_crcsr_init(struct vme_bridge *fake_bridge)
+{
+	u32 vstat;
+	struct fake_driver *bridge;
+
+	bridge = fake_bridge->driver_priv;
+
+	/* Allocate mem for CR/CSR image */
+	bridge->crcsr_kernel = kzalloc(VME_CRCSR_BUF_SIZE, GFP_KERNEL);
+	bridge->crcsr_bus = fake_ptr_to_pci(bridge->crcsr_kernel);
+	if (!bridge->crcsr_kernel)
+		return -ENOMEM;
+
+	vstat = fake_slot_get(fake_bridge);
+
+	pr_info("CR/CSR Offset: %d\n", vstat);
+
+	return 0;
+}
+
+static void fake_crcsr_exit(struct vme_bridge *fake_bridge)
+{
+	struct fake_driver *bridge;
+
+	bridge = fake_bridge->driver_priv;
+
+	kfree(bridge->crcsr_kernel);
+}
+
+
+static int __init fake_init(void)
+{
+	int retval, i;
+	struct list_head *pos = NULL, *n;
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *fake_device;
+	struct vme_master_resource *master_image;
+	struct vme_slave_resource *slave_image;
+	struct vme_lm_resource *lm;
+
+	/* We need a fake parent device */
+	vme_root = __root_device_register("vme", THIS_MODULE);
+	if (IS_ERR(vme_root))
+		return PTR_ERR(vme_root);
+
+	/* If we want to support more than one bridge at some point, we need to
+	 * dynamically allocate this so we get one per device.
+	 */
+	fake_bridge = kzalloc(sizeof(*fake_bridge), GFP_KERNEL);
+	if (!fake_bridge) {
+		retval = -ENOMEM;
+		goto err_struct;
+	}
+
+	fake_device = kzalloc(sizeof(*fake_device), GFP_KERNEL);
+	if (!fake_device) {
+		retval = -ENOMEM;
+		goto err_driver;
+	}
+
+	fake_bridge->driver_priv = fake_device;
+
+	fake_bridge->parent = vme_root;
+
+	fake_device->parent = fake_bridge;
+
+	/* Initialize wait queues & mutual exclusion flags */
+	mutex_init(&fake_device->vme_int);
+	mutex_init(&fake_bridge->irq_mtx);
+	tasklet_init(&fake_device->int_tasklet, fake_VIRQ_tasklet,
+			(unsigned long) fake_bridge);
+
+	strcpy(fake_bridge->name, driver_name);
+
+	/* Add master windows to list */
+	INIT_LIST_HEAD(&fake_bridge->master_resources);
+	for (i = 0; i < FAKE_MAX_MASTER; i++) {
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
+			retval = -ENOMEM;
+			goto err_master;
+		}
+		master_image->parent = fake_bridge;
+		spin_lock_init(&master_image->lock);
+		master_image->locked = 0;
+		master_image->number = i;
+		master_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
+			VME_A64;
+		master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
+			VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
+			VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
+			VME_PROG | VME_DATA;
+		master_image->width_attr = VME_D16 | VME_D32;
+		memset(&master_image->bus_resource, 0,
+				sizeof(struct resource));
+		master_image->kern_base  = NULL;
+		list_add_tail(&master_image->list,
+				&fake_bridge->master_resources);
+	}
+
+	/* Add slave windows to list */
+	INIT_LIST_HEAD(&fake_bridge->slave_resources);
+	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
+			retval = -ENOMEM;
+			goto err_slave;
+		}
+		slave_image->parent = fake_bridge;
+		mutex_init(&slave_image->mtx);
+		slave_image->locked = 0;
+		slave_image->number = i;
+		slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
+			VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 |
+			VME_USER3 | VME_USER4;
+		slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
+			VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
+			VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
+			VME_PROG | VME_DATA;
+		list_add_tail(&slave_image->list,
+				&fake_bridge->slave_resources);
+	}
+
+	/* Add location monitor to list */
+	INIT_LIST_HEAD(&fake_bridge->lm_resources);
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
+		retval = -ENOMEM;
+		goto err_lm;
+	}
+	lm->parent = fake_bridge;
+	mutex_init(&lm->mtx);
+	lm->locked = 0;
+	lm->number = 1;
+	lm->monitors = 4;
+	list_add_tail(&lm->list, &fake_bridge->lm_resources);
+
+	fake_bridge->slave_get = fake_slave_get;
+	fake_bridge->slave_set = fake_slave_set;
+	fake_bridge->master_get = fake_master_get;
+	fake_bridge->master_set = fake_master_set;
+	fake_bridge->master_read = fake_master_read;
+	fake_bridge->master_write = fake_master_write;
+	fake_bridge->master_rmw = fake_master_rmw;
+	fake_bridge->irq_set = fake_irq_set;
+	fake_bridge->irq_generate = fake_irq_generate;
+	fake_bridge->lm_set = fake_lm_set;
+	fake_bridge->lm_get = fake_lm_get;
+	fake_bridge->lm_attach = fake_lm_attach;
+	fake_bridge->lm_detach = fake_lm_detach;
+	fake_bridge->slot_get = fake_slot_get;
+	fake_bridge->alloc_consistent = fake_alloc_consistent;
+	fake_bridge->free_consistent = fake_free_consistent;
+
+	pr_info("Board is%s the VME system controller\n",
+			(geoid == 1) ? "" : " not");
+
+	pr_info("VME geographical address is set to %d\n", geoid);
+
+	retval = fake_crcsr_init(fake_bridge);
+	if (retval) {
+		pr_err("CR/CSR configuration failed.\n");
+		goto err_crcsr;
+	}
+
+	retval = vme_register_bridge(fake_bridge);
+	if (retval != 0) {
+		pr_err("Chip Registration failed.\n");
+		goto err_reg;
+	}
+
+	exit_pointer = fake_bridge;
+
+	return 0;
+
+err_reg:
+	fake_crcsr_exit(fake_bridge);
+err_crcsr:
+err_lm:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &fake_bridge->lm_resources) {
+		lm = list_entry(pos, struct vme_lm_resource, list);
+		list_del(pos);
+		kfree(lm);
+	}
+err_slave:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &fake_bridge->slave_resources) {
+		slave_image = list_entry(pos, struct vme_slave_resource, list);
+		list_del(pos);
+		kfree(slave_image);
+	}
+err_master:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &fake_bridge->master_resources) {
+		master_image = list_entry(pos, struct vme_master_resource,
+				list);
+		list_del(pos);
+		kfree(master_image);
+	}
+
+	kfree(fake_device);
+err_driver:
+	kfree(fake_bridge);
+err_struct:
+	return retval;
+
+}
+
+
+static void __exit fake_exit(void)
+{
+	struct list_head *pos = NULL;
+	struct list_head *tmplist;
+	struct vme_master_resource *master_image;
+	struct vme_slave_resource *slave_image;
+	int i;
+	struct vme_bridge *fake_bridge;
+	struct fake_driver *bridge;
+
+	fake_bridge = exit_pointer;
+
+	bridge = fake_bridge->driver_priv;
+
+	pr_debug("Driver is being unloaded.\n");
+
+	/*
+	 *  Shutdown all inbound and outbound windows.
+	 */
+	for (i = 0; i < FAKE_MAX_MASTER; i++)
+		bridge->masters[i].enabled = 0;
+
+	for (i = 0; i < FAKE_MAX_SLAVE; i++)
+		bridge->slaves[i].enabled = 0;
+
+	/*
+	 *  Shutdown Location monitor.
+	 */
+	bridge->lm_enabled = 0;
+
+	vme_unregister_bridge(fake_bridge);
+
+	fake_crcsr_exit(fake_bridge);
+	/* resources are stored in link list */
+	list_for_each_safe(pos, tmplist, &fake_bridge->slave_resources) {
+		slave_image = list_entry(pos, struct vme_slave_resource, list);
+		list_del(pos);
+		kfree(slave_image);
+	}
+
+	/* resources are stored in link list */
+	list_for_each_safe(pos, tmplist, &fake_bridge->master_resources) {
+		master_image = list_entry(pos, struct vme_master_resource,
+				list);
+		list_del(pos);
+		kfree(master_image);
+	}
+
+	kfree(fake_bridge->driver_priv);
+
+	kfree(fake_bridge);
+
+	root_device_unregister(vme_root);
+}
+
+
+MODULE_PARM_DESC(geoid, "Set geographical addressing");
+module_param(geoid, int, 0);
+
+MODULE_DESCRIPTION("Fake VME bridge driver");
+MODULE_LICENSE("GPL");
+
+module_init(fake_init);
+module_exit(fake_exit);
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
new file mode 100644
index 000000000..5ccda1a36
--- /dev/null
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -0,0 +1,2668 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Support for the Tundra TSI148 VME-PCI Bridge Chip
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on work by Tom Armistead and Ajit Prem
+ * Copyright 2004 Motorola Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/byteorder/generic.h>
+#include <linux/vme.h>
+
+#include "../vme_bridge.h"
+#include "vme_tsi148.h"
+
+static int tsi148_probe(struct pci_dev *, const struct pci_device_id *);
+static void tsi148_remove(struct pci_dev *);
+
+
+/* Module parameter */
+static bool err_chk;
+static int geoid;
+
+static const char driver_name[] = "vme_tsi148";
+
+static const struct pci_device_id tsi148_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_TSI148) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, tsi148_ids);
+
+static struct pci_driver tsi148_driver = {
+	.name = driver_name,
+	.id_table = tsi148_ids,
+	.probe = tsi148_probe,
+	.remove = tsi148_remove,
+};
+
+static void reg_join(unsigned int high, unsigned int low,
+	unsigned long long *variable)
+{
+	*variable = (unsigned long long)high << 32;
+	*variable |= (unsigned long long)low;
+}
+
+static void reg_split(unsigned long long variable, unsigned int *high,
+	unsigned int *low)
+{
+	*low = (unsigned int)variable & 0xFFFFFFFF;
+	*high = (unsigned int)(variable >> 32);
+}
+
+/*
+ * Wakes up DMA queue.
+ */
+static u32 tsi148_DMA_irqhandler(struct tsi148_driver *bridge,
+	int channel_mask)
+{
+	u32 serviced = 0;
+
+	if (channel_mask & TSI148_LCSR_INTS_DMA0S) {
+		wake_up(&bridge->dma_queue[0]);
+		serviced |= TSI148_LCSR_INTC_DMA0C;
+	}
+	if (channel_mask & TSI148_LCSR_INTS_DMA1S) {
+		wake_up(&bridge->dma_queue[1]);
+		serviced |= TSI148_LCSR_INTC_DMA1C;
+	}
+
+	return serviced;
+}
+
+/*
+ * Wake up location monitor queue
+ */
+static u32 tsi148_LM_irqhandler(struct tsi148_driver *bridge, u32 stat)
+{
+	int i;
+	u32 serviced = 0;
+
+	for (i = 0; i < 4; i++) {
+		if (stat & TSI148_LCSR_INTS_LMS[i]) {
+			/* We only enable interrupts if the callback is set */
+			bridge->lm_callback[i](bridge->lm_data[i]);
+			serviced |= TSI148_LCSR_INTC_LMC[i];
+		}
+	}
+
+	return serviced;
+}
+
+/*
+ * Wake up mail box queue.
+ *
+ * XXX This functionality is not exposed up though API.
+ */
+static u32 tsi148_MB_irqhandler(struct vme_bridge *tsi148_bridge, u32 stat)
+{
+	int i;
+	u32 val;
+	u32 serviced = 0;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	for (i = 0; i < 4; i++) {
+		if (stat & TSI148_LCSR_INTS_MBS[i]) {
+			val = ioread32be(bridge->base +	TSI148_GCSR_MBOX[i]);
+			dev_err(tsi148_bridge->parent, "VME Mailbox %d received"
+				": 0x%x\n", i, val);
+			serviced |= TSI148_LCSR_INTC_MBC[i];
+		}
+	}
+
+	return serviced;
+}
+
+/*
+ * Display error & status message when PERR (PCI) exception interrupt occurs.
+ */
+static u32 tsi148_PERR_irqhandler(struct vme_bridge *tsi148_bridge)
+{
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	dev_err(tsi148_bridge->parent, "PCI Exception at address: 0x%08x:%08x, "
+		"attributes: %08x\n",
+		ioread32be(bridge->base + TSI148_LCSR_EDPAU),
+		ioread32be(bridge->base + TSI148_LCSR_EDPAL),
+		ioread32be(bridge->base + TSI148_LCSR_EDPAT));
+
+	dev_err(tsi148_bridge->parent, "PCI-X attribute reg: %08x, PCI-X split "
+		"completion reg: %08x\n",
+		ioread32be(bridge->base + TSI148_LCSR_EDPXA),
+		ioread32be(bridge->base + TSI148_LCSR_EDPXS));
+
+	iowrite32be(TSI148_LCSR_EDPAT_EDPCL, bridge->base + TSI148_LCSR_EDPAT);
+
+	return TSI148_LCSR_INTC_PERRC;
+}
+
+/*
+ * Save address and status when VME error interrupt occurs.
+ */
+static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge)
+{
+	unsigned int error_addr_high, error_addr_low;
+	unsigned long long error_addr;
+	u32 error_attrib;
+	int error_am;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	error_addr_high = ioread32be(bridge->base + TSI148_LCSR_VEAU);
+	error_addr_low = ioread32be(bridge->base + TSI148_LCSR_VEAL);
+	error_attrib = ioread32be(bridge->base + TSI148_LCSR_VEAT);
+	error_am = (error_attrib & TSI148_LCSR_VEAT_AM_M) >> 8;
+
+	reg_join(error_addr_high, error_addr_low, &error_addr);
+
+	/* Check for exception register overflow (we have lost error data) */
+	if (error_attrib & TSI148_LCSR_VEAT_VEOF) {
+		dev_err(tsi148_bridge->parent, "VME Bus Exception Overflow "
+			"Occurred\n");
+	}
+
+	if (err_chk)
+		vme_bus_error_handler(tsi148_bridge, error_addr, error_am);
+	else
+		dev_err(tsi148_bridge->parent,
+			"VME Bus Error at address: 0x%llx, attributes: %08x\n",
+			error_addr, error_attrib);
+
+	/* Clear Status */
+	iowrite32be(TSI148_LCSR_VEAT_VESCL, bridge->base + TSI148_LCSR_VEAT);
+
+	return TSI148_LCSR_INTC_VERRC;
+}
+
+/*
+ * Wake up IACK queue.
+ */
+static u32 tsi148_IACK_irqhandler(struct tsi148_driver *bridge)
+{
+	wake_up(&bridge->iack_queue);
+
+	return TSI148_LCSR_INTC_IACKC;
+}
+
+/*
+ * Calling VME bus interrupt callback if provided.
+ */
+static u32 tsi148_VIRQ_irqhandler(struct vme_bridge *tsi148_bridge,
+	u32 stat)
+{
+	int vec, i, serviced = 0;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	for (i = 7; i > 0; i--) {
+		if (stat & (1 << i)) {
+			/*
+			 * Note: Even though the registers are defined as
+			 * 32-bits in the spec, we only want to issue 8-bit
+			 * IACK cycles on the bus, read from offset 3.
+			 */
+			vec = ioread8(bridge->base + TSI148_LCSR_VIACK[i] + 3);
+
+			vme_irq_handler(tsi148_bridge, i, vec);
+
+			serviced |= (1 << i);
+		}
+	}
+
+	return serviced;
+}
+
+/*
+ * Top level interrupt handler.  Clears appropriate interrupt status bits and
+ * then calls appropriate sub handler(s).
+ */
+static irqreturn_t tsi148_irqhandler(int irq, void *ptr)
+{
+	u32 stat, enable, serviced = 0;
+	struct vme_bridge *tsi148_bridge;
+	struct tsi148_driver *bridge;
+
+	tsi148_bridge = ptr;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	/* Determine which interrupts are unmasked and set */
+	enable = ioread32be(bridge->base + TSI148_LCSR_INTEO);
+	stat = ioread32be(bridge->base + TSI148_LCSR_INTS);
+
+	/* Only look at unmasked interrupts */
+	stat &= enable;
+
+	if (unlikely(!stat))
+		return IRQ_NONE;
+
+	/* Call subhandlers as appropriate */
+	/* DMA irqs */
+	if (stat & (TSI148_LCSR_INTS_DMA1S | TSI148_LCSR_INTS_DMA0S))
+		serviced |= tsi148_DMA_irqhandler(bridge, stat);
+
+	/* Location monitor irqs */
+	if (stat & (TSI148_LCSR_INTS_LM3S | TSI148_LCSR_INTS_LM2S |
+			TSI148_LCSR_INTS_LM1S | TSI148_LCSR_INTS_LM0S))
+		serviced |= tsi148_LM_irqhandler(bridge, stat);
+
+	/* Mail box irqs */
+	if (stat & (TSI148_LCSR_INTS_MB3S | TSI148_LCSR_INTS_MB2S |
+			TSI148_LCSR_INTS_MB1S | TSI148_LCSR_INTS_MB0S))
+		serviced |= tsi148_MB_irqhandler(tsi148_bridge, stat);
+
+	/* PCI bus error */
+	if (stat & TSI148_LCSR_INTS_PERRS)
+		serviced |= tsi148_PERR_irqhandler(tsi148_bridge);
+
+	/* VME bus error */
+	if (stat & TSI148_LCSR_INTS_VERRS)
+		serviced |= tsi148_VERR_irqhandler(tsi148_bridge);
+
+	/* IACK irq */
+	if (stat & TSI148_LCSR_INTS_IACKS)
+		serviced |= tsi148_IACK_irqhandler(bridge);
+
+	/* VME bus irqs */
+	if (stat & (TSI148_LCSR_INTS_IRQ7S | TSI148_LCSR_INTS_IRQ6S |
+			TSI148_LCSR_INTS_IRQ5S | TSI148_LCSR_INTS_IRQ4S |
+			TSI148_LCSR_INTS_IRQ3S | TSI148_LCSR_INTS_IRQ2S |
+			TSI148_LCSR_INTS_IRQ1S))
+		serviced |= tsi148_VIRQ_irqhandler(tsi148_bridge, stat);
+
+	/* Clear serviced interrupts */
+	iowrite32be(serviced, bridge->base + TSI148_LCSR_INTC);
+
+	return IRQ_HANDLED;
+}
+
+static int tsi148_irq_init(struct vme_bridge *tsi148_bridge)
+{
+	int result;
+	unsigned int tmp;
+	struct pci_dev *pdev;
+	struct tsi148_driver *bridge;
+
+	pdev = to_pci_dev(tsi148_bridge->parent);
+
+	bridge = tsi148_bridge->driver_priv;
+
+	result = request_irq(pdev->irq,
+			     tsi148_irqhandler,
+			     IRQF_SHARED,
+			     driver_name, tsi148_bridge);
+	if (result) {
+		dev_err(tsi148_bridge->parent, "Can't get assigned pci irq "
+			"vector %02X\n", pdev->irq);
+		return result;
+	}
+
+	/* Enable and unmask interrupts */
+	tmp = TSI148_LCSR_INTEO_DMA1EO | TSI148_LCSR_INTEO_DMA0EO |
+		TSI148_LCSR_INTEO_MB3EO | TSI148_LCSR_INTEO_MB2EO |
+		TSI148_LCSR_INTEO_MB1EO | TSI148_LCSR_INTEO_MB0EO |
+		TSI148_LCSR_INTEO_PERREO | TSI148_LCSR_INTEO_VERREO |
+		TSI148_LCSR_INTEO_IACKEO;
+
+	/* This leaves the following interrupts masked.
+	 * TSI148_LCSR_INTEO_VIEEO
+	 * TSI148_LCSR_INTEO_SYSFLEO
+	 * TSI148_LCSR_INTEO_ACFLEO
+	 */
+
+	/* Don't enable Location Monitor interrupts here - they will be
+	 * enabled when the location monitors are properly configured and
+	 * a callback has been attached.
+	 * TSI148_LCSR_INTEO_LM0EO
+	 * TSI148_LCSR_INTEO_LM1EO
+	 * TSI148_LCSR_INTEO_LM2EO
+	 * TSI148_LCSR_INTEO_LM3EO
+	 */
+
+	/* Don't enable VME interrupts until we add a handler, else the board
+	 * will respond to it and we don't want that unless it knows how to
+	 * properly deal with it.
+	 * TSI148_LCSR_INTEO_IRQ7EO
+	 * TSI148_LCSR_INTEO_IRQ6EO
+	 * TSI148_LCSR_INTEO_IRQ5EO
+	 * TSI148_LCSR_INTEO_IRQ4EO
+	 * TSI148_LCSR_INTEO_IRQ3EO
+	 * TSI148_LCSR_INTEO_IRQ2EO
+	 * TSI148_LCSR_INTEO_IRQ1EO
+	 */
+
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN);
+
+	return 0;
+}
+
+static void tsi148_irq_exit(struct vme_bridge *tsi148_bridge,
+	struct pci_dev *pdev)
+{
+	struct tsi148_driver *bridge = tsi148_bridge->driver_priv;
+
+	/* Turn off interrupts */
+	iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEO);
+	iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEN);
+
+	/* Clear all interrupts */
+	iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_INTC);
+
+	/* Detach interrupt handler */
+	free_irq(pdev->irq, tsi148_bridge);
+}
+
+/*
+ * Check to see if an IACk has been received, return true (1) or false (0).
+ */
+static int tsi148_iack_received(struct tsi148_driver *bridge)
+{
+	u32 tmp;
+
+	tmp = ioread32be(bridge->base + TSI148_LCSR_VICR);
+
+	if (tmp & TSI148_LCSR_VICR_IRQS)
+		return 0;
+	else
+		return 1;
+}
+
+/*
+ * Configure VME interrupt
+ */
+static void tsi148_irq_set(struct vme_bridge *tsi148_bridge, int level,
+	int state, int sync)
+{
+	struct pci_dev *pdev;
+	u32 tmp;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	/* We need to do the ordering differently for enabling and disabling */
+	if (state == 0) {
+		tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN);
+		tmp &= ~TSI148_LCSR_INTEN_IRQEN[level - 1];
+		iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN);
+
+		tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO);
+		tmp &= ~TSI148_LCSR_INTEO_IRQEO[level - 1];
+		iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
+
+		if (sync != 0) {
+			pdev = to_pci_dev(tsi148_bridge->parent);
+			synchronize_irq(pdev->irq);
+		}
+	} else {
+		tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO);
+		tmp |= TSI148_LCSR_INTEO_IRQEO[level - 1];
+		iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
+
+		tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN);
+		tmp |= TSI148_LCSR_INTEN_IRQEN[level - 1];
+		iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN);
+	}
+}
+
+/*
+ * Generate a VME bus interrupt at the requested level & vector. Wait for
+ * interrupt to be acked.
+ */
+static int tsi148_irq_generate(struct vme_bridge *tsi148_bridge, int level,
+	int statid)
+{
+	u32 tmp;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	mutex_lock(&bridge->vme_int);
+
+	/* Read VICR register */
+	tmp = ioread32be(bridge->base + TSI148_LCSR_VICR);
+
+	/* Set Status/ID */
+	tmp = (tmp & ~TSI148_LCSR_VICR_STID_M) |
+		(statid & TSI148_LCSR_VICR_STID_M);
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR);
+
+	/* Assert VMEbus IRQ */
+	tmp = tmp | TSI148_LCSR_VICR_IRQL[level];
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR);
+
+	/* XXX Consider implementing a timeout? */
+	wait_event_interruptible(bridge->iack_queue,
+		tsi148_iack_received(bridge));
+
+	mutex_unlock(&bridge->vme_int);
+
+	return 0;
+}
+
+/*
+ * Initialize a slave window with the requested attributes.
+ */
+static int tsi148_slave_set(struct vme_slave_resource *image, int enabled,
+	unsigned long long vme_base, unsigned long long size,
+	dma_addr_t pci_base, u32 aspace, u32 cycle)
+{
+	unsigned int i, addr = 0, granularity = 0;
+	unsigned int temp_ctl = 0;
+	unsigned int vme_base_low, vme_base_high;
+	unsigned int vme_bound_low, vme_bound_high;
+	unsigned int pci_offset_low, pci_offset_high;
+	unsigned long long vme_bound, pci_offset;
+	struct vme_bridge *tsi148_bridge;
+	struct tsi148_driver *bridge;
+
+	tsi148_bridge = image->parent;
+	bridge = tsi148_bridge->driver_priv;
+
+	i = image->number;
+
+	switch (aspace) {
+	case VME_A16:
+		granularity = 0x10;
+		addr |= TSI148_LCSR_ITAT_AS_A16;
+		break;
+	case VME_A24:
+		granularity = 0x1000;
+		addr |= TSI148_LCSR_ITAT_AS_A24;
+		break;
+	case VME_A32:
+		granularity = 0x10000;
+		addr |= TSI148_LCSR_ITAT_AS_A32;
+		break;
+	case VME_A64:
+		granularity = 0x10000;
+		addr |= TSI148_LCSR_ITAT_AS_A64;
+		break;
+	default:
+		dev_err(tsi148_bridge->parent, "Invalid address space\n");
+		return -EINVAL;
+		break;
+	}
+
+	/* Convert 64-bit variables to 2x 32-bit variables */
+	reg_split(vme_base, &vme_base_high, &vme_base_low);
+
+	/*
+	 * Bound address is a valid address for the window, adjust
+	 * accordingly
+	 */
+	vme_bound = vme_base + size - granularity;
+	reg_split(vme_bound, &vme_bound_high, &vme_bound_low);
+	pci_offset = (unsigned long long)pci_base - vme_base;
+	reg_split(pci_offset, &pci_offset_high, &pci_offset_low);
+
+	if (vme_base_low & (granularity - 1)) {
+		dev_err(tsi148_bridge->parent, "Invalid VME base alignment\n");
+		return -EINVAL;
+	}
+	if (vme_bound_low & (granularity - 1)) {
+		dev_err(tsi148_bridge->parent, "Invalid VME bound alignment\n");
+		return -EINVAL;
+	}
+	if (pci_offset_low & (granularity - 1)) {
+		dev_err(tsi148_bridge->parent, "Invalid PCI Offset "
+			"alignment\n");
+		return -EINVAL;
+	}
+
+	/*  Disable while we are mucking around */
+	temp_ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITAT);
+	temp_ctl &= ~TSI148_LCSR_ITAT_EN;
+	iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITAT);
+
+	/* Setup mapping */
+	iowrite32be(vme_base_high, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITSAU);
+	iowrite32be(vme_base_low, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITSAL);
+	iowrite32be(vme_bound_high, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITEAU);
+	iowrite32be(vme_bound_low, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITEAL);
+	iowrite32be(pci_offset_high, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITOFU);
+	iowrite32be(pci_offset_low, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITOFL);
+
+	/* Setup 2eSST speeds */
+	temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M;
+	switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
+	case VME_2eSST160:
+		temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160;
+		break;
+	case VME_2eSST267:
+		temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267;
+		break;
+	case VME_2eSST320:
+		temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320;
+		break;
+	}
+
+	/* Setup cycle types */
+	temp_ctl &= ~(0x1F << 7);
+	if (cycle & VME_BLT)
+		temp_ctl |= TSI148_LCSR_ITAT_BLT;
+	if (cycle & VME_MBLT)
+		temp_ctl |= TSI148_LCSR_ITAT_MBLT;
+	if (cycle & VME_2eVME)
+		temp_ctl |= TSI148_LCSR_ITAT_2eVME;
+	if (cycle & VME_2eSST)
+		temp_ctl |= TSI148_LCSR_ITAT_2eSST;
+	if (cycle & VME_2eSSTB)
+		temp_ctl |= TSI148_LCSR_ITAT_2eSSTB;
+
+	/* Setup address space */
+	temp_ctl &= ~TSI148_LCSR_ITAT_AS_M;
+	temp_ctl |= addr;
+
+	temp_ctl &= ~0xF;
+	if (cycle & VME_SUPER)
+		temp_ctl |= TSI148_LCSR_ITAT_SUPR ;
+	if (cycle & VME_USER)
+		temp_ctl |= TSI148_LCSR_ITAT_NPRIV;
+	if (cycle & VME_PROG)
+		temp_ctl |= TSI148_LCSR_ITAT_PGM;
+	if (cycle & VME_DATA)
+		temp_ctl |= TSI148_LCSR_ITAT_DATA;
+
+	/* Write ctl reg without enable */
+	iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITAT);
+
+	if (enabled)
+		temp_ctl |= TSI148_LCSR_ITAT_EN;
+
+	iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITAT);
+
+	return 0;
+}
+
+/*
+ * Get slave window configuration.
+ */
+static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled,
+	unsigned long long *vme_base, unsigned long long *size,
+	dma_addr_t *pci_base, u32 *aspace, u32 *cycle)
+{
+	unsigned int i, granularity = 0, ctl = 0;
+	unsigned int vme_base_low, vme_base_high;
+	unsigned int vme_bound_low, vme_bound_high;
+	unsigned int pci_offset_low, pci_offset_high;
+	unsigned long long vme_bound, pci_offset;
+	struct tsi148_driver *bridge;
+
+	bridge = image->parent->driver_priv;
+
+	i = image->number;
+
+	/* Read registers */
+	ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITAT);
+
+	vme_base_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITSAU);
+	vme_base_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITSAL);
+	vme_bound_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITEAU);
+	vme_bound_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITEAL);
+	pci_offset_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITOFU);
+	pci_offset_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
+		TSI148_LCSR_OFFSET_ITOFL);
+
+	/* Convert 64-bit variables to 2x 32-bit variables */
+	reg_join(vme_base_high, vme_base_low, vme_base);
+	reg_join(vme_bound_high, vme_bound_low, &vme_bound);
+	reg_join(pci_offset_high, pci_offset_low, &pci_offset);
+
+	*pci_base = (dma_addr_t)(*vme_base + pci_offset);
+
+	*enabled = 0;
+	*aspace = 0;
+	*cycle = 0;
+
+	if (ctl & TSI148_LCSR_ITAT_EN)
+		*enabled = 1;
+
+	if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A16) {
+		granularity = 0x10;
+		*aspace |= VME_A16;
+	}
+	if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A24) {
+		granularity = 0x1000;
+		*aspace |= VME_A24;
+	}
+	if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A32) {
+		granularity = 0x10000;
+		*aspace |= VME_A32;
+	}
+	if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A64) {
+		granularity = 0x10000;
+		*aspace |= VME_A64;
+	}
+
+	/* Need granularity before we set the size */
+	*size = (unsigned long long)((vme_bound - *vme_base) + granularity);
+
+
+	if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160)
+		*cycle |= VME_2eSST160;
+	if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267)
+		*cycle |= VME_2eSST267;
+	if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320)
+		*cycle |= VME_2eSST320;
+
+	if (ctl & TSI148_LCSR_ITAT_BLT)
+		*cycle |= VME_BLT;
+	if (ctl & TSI148_LCSR_ITAT_MBLT)
+		*cycle |= VME_MBLT;
+	if (ctl & TSI148_LCSR_ITAT_2eVME)
+		*cycle |= VME_2eVME;
+	if (ctl & TSI148_LCSR_ITAT_2eSST)
+		*cycle |= VME_2eSST;
+	if (ctl & TSI148_LCSR_ITAT_2eSSTB)
+		*cycle |= VME_2eSSTB;
+
+	if (ctl & TSI148_LCSR_ITAT_SUPR)
+		*cycle |= VME_SUPER;
+	if (ctl & TSI148_LCSR_ITAT_NPRIV)
+		*cycle |= VME_USER;
+	if (ctl & TSI148_LCSR_ITAT_PGM)
+		*cycle |= VME_PROG;
+	if (ctl & TSI148_LCSR_ITAT_DATA)
+		*cycle |= VME_DATA;
+
+	return 0;
+}
+
+/*
+ * Allocate and map PCI Resource
+ */
+static int tsi148_alloc_resource(struct vme_master_resource *image,
+	unsigned long long size)
+{
+	unsigned long long existing_size;
+	int retval = 0;
+	struct pci_dev *pdev;
+	struct vme_bridge *tsi148_bridge;
+
+	tsi148_bridge = image->parent;
+
+	pdev = to_pci_dev(tsi148_bridge->parent);
+
+	existing_size = (unsigned long long)(image->bus_resource.end -
+		image->bus_resource.start);
+
+	/* If the existing size is OK, return */
+	if ((size != 0) && (existing_size == (size - 1)))
+		return 0;
+
+	if (existing_size != 0) {
+		iounmap(image->kern_base);
+		image->kern_base = NULL;
+		kfree(image->bus_resource.name);
+		release_resource(&image->bus_resource);
+		memset(&image->bus_resource, 0, sizeof(image->bus_resource));
+	}
+
+	/* Exit here if size is zero */
+	if (size == 0)
+		return 0;
+
+	if (!image->bus_resource.name) {
+		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
+		if (!image->bus_resource.name) {
+			retval = -ENOMEM;
+			goto err_name;
+		}
+	}
+
+	sprintf((char *)image->bus_resource.name, "%s.%d", tsi148_bridge->name,
+		image->number);
+
+	image->bus_resource.start = 0;
+	image->bus_resource.end = (unsigned long)size;
+	image->bus_resource.flags = IORESOURCE_MEM;
+
+	retval = pci_bus_alloc_resource(pdev->bus,
+		&image->bus_resource, size, 0x10000, PCIBIOS_MIN_MEM,
+		0, NULL, NULL);
+	if (retval) {
+		dev_err(tsi148_bridge->parent, "Failed to allocate mem "
+			"resource for window %d size 0x%lx start 0x%lx\n",
+			image->number, (unsigned long)size,
+			(unsigned long)image->bus_resource.start);
+		goto err_resource;
+	}
+
+	image->kern_base = ioremap(
+		image->bus_resource.start, size);
+	if (!image->kern_base) {
+		dev_err(tsi148_bridge->parent, "Failed to remap resource\n");
+		retval = -ENOMEM;
+		goto err_remap;
+	}
+
+	return 0;
+
+err_remap:
+	release_resource(&image->bus_resource);
+err_resource:
+	kfree(image->bus_resource.name);
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
+err_name:
+	return retval;
+}
+
+/*
+ * Free and unmap PCI Resource
+ */
+static void tsi148_free_resource(struct vme_master_resource *image)
+{
+	iounmap(image->kern_base);
+	image->kern_base = NULL;
+	release_resource(&image->bus_resource);
+	kfree(image->bus_resource.name);
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
+}
+
+/*
+ * Set the attributes of an outbound window.
+ */
+static int tsi148_master_set(struct vme_master_resource *image, int enabled,
+	unsigned long long vme_base, unsigned long long size, u32 aspace,
+	u32 cycle, u32 dwidth)
+{
+	int retval = 0;
+	unsigned int i;
+	unsigned int temp_ctl = 0;
+	unsigned int pci_base_low, pci_base_high;
+	unsigned int pci_bound_low, pci_bound_high;
+	unsigned int vme_offset_low, vme_offset_high;
+	unsigned long long pci_bound, vme_offset, pci_base;
+	struct vme_bridge *tsi148_bridge;
+	struct tsi148_driver *bridge;
+	struct pci_bus_region region;
+	struct pci_dev *pdev;
+
+	tsi148_bridge = image->parent;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	pdev = to_pci_dev(tsi148_bridge->parent);
+
+	/* Verify input data */
+	if (vme_base & 0xFFFF) {
+		dev_err(tsi148_bridge->parent, "Invalid VME Window "
+			"alignment\n");
+		retval = -EINVAL;
+		goto err_window;
+	}
+
+	if ((size == 0) && (enabled != 0)) {
+		dev_err(tsi148_bridge->parent, "Size must be non-zero for "
+			"enabled windows\n");
+		retval = -EINVAL;
+		goto err_window;
+	}
+
+	spin_lock(&image->lock);
+
+	/* Let's allocate the resource here rather than further up the stack as
+	 * it avoids pushing loads of bus dependent stuff up the stack. If size
+	 * is zero, any existing resource will be freed.
+	 */
+	retval = tsi148_alloc_resource(image, size);
+	if (retval) {
+		spin_unlock(&image->lock);
+		dev_err(tsi148_bridge->parent, "Unable to allocate memory for "
+			"resource\n");
+		goto err_res;
+	}
+
+	if (size == 0) {
+		pci_base = 0;
+		pci_bound = 0;
+		vme_offset = 0;
+	} else {
+		pcibios_resource_to_bus(pdev->bus, &region,
+					&image->bus_resource);
+		pci_base = region.start;
+
+		/*
+		 * Bound address is a valid address for the window, adjust
+		 * according to window granularity.
+		 */
+		pci_bound = pci_base + (size - 0x10000);
+		vme_offset = vme_base - pci_base;
+	}
+
+	/* Convert 64-bit variables to 2x 32-bit variables */
+	reg_split(pci_base, &pci_base_high, &pci_base_low);
+	reg_split(pci_bound, &pci_bound_high, &pci_bound_low);
+	reg_split(vme_offset, &vme_offset_high, &vme_offset_low);
+
+	if (pci_base_low & 0xFFFF) {
+		spin_unlock(&image->lock);
+		dev_err(tsi148_bridge->parent, "Invalid PCI base alignment\n");
+		retval = -EINVAL;
+		goto err_gran;
+	}
+	if (pci_bound_low & 0xFFFF) {
+		spin_unlock(&image->lock);
+		dev_err(tsi148_bridge->parent, "Invalid PCI bound alignment\n");
+		retval = -EINVAL;
+		goto err_gran;
+	}
+	if (vme_offset_low & 0xFFFF) {
+		spin_unlock(&image->lock);
+		dev_err(tsi148_bridge->parent, "Invalid VME Offset "
+			"alignment\n");
+		retval = -EINVAL;
+		goto err_gran;
+	}
+
+	i = image->number;
+
+	/* Disable while we are mucking around */
+	temp_ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTAT);
+	temp_ctl &= ~TSI148_LCSR_OTAT_EN;
+	iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTAT);
+
+	/* Setup 2eSST speeds */
+	temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M;
+	switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
+	case VME_2eSST160:
+		temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160;
+		break;
+	case VME_2eSST267:
+		temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267;
+		break;
+	case VME_2eSST320:
+		temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320;
+		break;
+	}
+
+	/* Setup cycle types */
+	if (cycle & VME_BLT) {
+		temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
+		temp_ctl |= TSI148_LCSR_OTAT_TM_BLT;
+	}
+	if (cycle & VME_MBLT) {
+		temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
+		temp_ctl |= TSI148_LCSR_OTAT_TM_MBLT;
+	}
+	if (cycle & VME_2eVME) {
+		temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
+		temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME;
+	}
+	if (cycle & VME_2eSST) {
+		temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
+		temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST;
+	}
+	if (cycle & VME_2eSSTB) {
+		dev_warn(tsi148_bridge->parent, "Currently not setting "
+			"Broadcast Select Registers\n");
+		temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
+		temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB;
+	}
+
+	/* Setup data width */
+	temp_ctl &= ~TSI148_LCSR_OTAT_DBW_M;
+	switch (dwidth) {
+	case VME_D16:
+		temp_ctl |= TSI148_LCSR_OTAT_DBW_16;
+		break;
+	case VME_D32:
+		temp_ctl |= TSI148_LCSR_OTAT_DBW_32;
+		break;
+	default:
+		spin_unlock(&image->lock);
+		dev_err(tsi148_bridge->parent, "Invalid data width\n");
+		retval = -EINVAL;
+		goto err_dwidth;
+	}
+
+	/* Setup address space */
+	temp_ctl &= ~TSI148_LCSR_OTAT_AMODE_M;
+	switch (aspace) {
+	case VME_A16:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_A16;
+		break;
+	case VME_A24:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_A24;
+		break;
+	case VME_A32:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_A32;
+		break;
+	case VME_A64:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_A64;
+		break;
+	case VME_CRCSR:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_CRCSR;
+		break;
+	case VME_USER1:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER1;
+		break;
+	case VME_USER2:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER2;
+		break;
+	case VME_USER3:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER3;
+		break;
+	case VME_USER4:
+		temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER4;
+		break;
+	default:
+		spin_unlock(&image->lock);
+		dev_err(tsi148_bridge->parent, "Invalid address space\n");
+		retval = -EINVAL;
+		goto err_aspace;
+		break;
+	}
+
+	temp_ctl &= ~(3<<4);
+	if (cycle & VME_SUPER)
+		temp_ctl |= TSI148_LCSR_OTAT_SUP;
+	if (cycle & VME_PROG)
+		temp_ctl |= TSI148_LCSR_OTAT_PGM;
+
+	/* Setup mapping */
+	iowrite32be(pci_base_high, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTSAU);
+	iowrite32be(pci_base_low, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTSAL);
+	iowrite32be(pci_bound_high, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTEAU);
+	iowrite32be(pci_bound_low, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTEAL);
+	iowrite32be(vme_offset_high, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTOFU);
+	iowrite32be(vme_offset_low, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTOFL);
+
+	/* Write ctl reg without enable */
+	iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTAT);
+
+	if (enabled)
+		temp_ctl |= TSI148_LCSR_OTAT_EN;
+
+	iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTAT);
+
+	spin_unlock(&image->lock);
+	return 0;
+
+err_aspace:
+err_dwidth:
+err_gran:
+	tsi148_free_resource(image);
+err_res:
+err_window:
+	return retval;
+
+}
+
+/*
+ * Set the attributes of an outbound window.
+ *
+ * XXX Not parsing prefetch information.
+ */
+static int __tsi148_master_get(struct vme_master_resource *image, int *enabled,
+	unsigned long long *vme_base, unsigned long long *size, u32 *aspace,
+	u32 *cycle, u32 *dwidth)
+{
+	unsigned int i, ctl;
+	unsigned int pci_base_low, pci_base_high;
+	unsigned int pci_bound_low, pci_bound_high;
+	unsigned int vme_offset_low, vme_offset_high;
+
+	unsigned long long pci_base, pci_bound, vme_offset;
+	struct tsi148_driver *bridge;
+
+	bridge = image->parent->driver_priv;
+
+	i = image->number;
+
+	ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTAT);
+
+	pci_base_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTSAU);
+	pci_base_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTSAL);
+	pci_bound_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTEAU);
+	pci_bound_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTEAL);
+	vme_offset_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTOFU);
+	vme_offset_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTOFL);
+
+	/* Convert 64-bit variables to 2x 32-bit variables */
+	reg_join(pci_base_high, pci_base_low, &pci_base);
+	reg_join(pci_bound_high, pci_bound_low, &pci_bound);
+	reg_join(vme_offset_high, vme_offset_low, &vme_offset);
+
+	*vme_base = pci_base + vme_offset;
+	*size = (unsigned long long)(pci_bound - pci_base) + 0x10000;
+
+	*enabled = 0;
+	*aspace = 0;
+	*cycle = 0;
+	*dwidth = 0;
+
+	if (ctl & TSI148_LCSR_OTAT_EN)
+		*enabled = 1;
+
+	/* Setup address space */
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A16)
+		*aspace |= VME_A16;
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A24)
+		*aspace |= VME_A24;
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A32)
+		*aspace |= VME_A32;
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A64)
+		*aspace |= VME_A64;
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_CRCSR)
+		*aspace |= VME_CRCSR;
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER1)
+		*aspace |= VME_USER1;
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER2)
+		*aspace |= VME_USER2;
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER3)
+		*aspace |= VME_USER3;
+	if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER4)
+		*aspace |= VME_USER4;
+
+	/* Setup 2eSST speeds */
+	if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160)
+		*cycle |= VME_2eSST160;
+	if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267)
+		*cycle |= VME_2eSST267;
+	if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320)
+		*cycle |= VME_2eSST320;
+
+	/* Setup cycle types */
+	if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_SCT)
+		*cycle |= VME_SCT;
+	if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_BLT)
+		*cycle |= VME_BLT;
+	if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_MBLT)
+		*cycle |= VME_MBLT;
+	if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eVME)
+		*cycle |= VME_2eVME;
+	if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSST)
+		*cycle |= VME_2eSST;
+	if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSSTB)
+		*cycle |= VME_2eSSTB;
+
+	if (ctl & TSI148_LCSR_OTAT_SUP)
+		*cycle |= VME_SUPER;
+	else
+		*cycle |= VME_USER;
+
+	if (ctl & TSI148_LCSR_OTAT_PGM)
+		*cycle |= VME_PROG;
+	else
+		*cycle |= VME_DATA;
+
+	/* Setup data width */
+	if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_16)
+		*dwidth = VME_D16;
+	if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_32)
+		*dwidth = VME_D32;
+
+	return 0;
+}
+
+
+static int tsi148_master_get(struct vme_master_resource *image, int *enabled,
+	unsigned long long *vme_base, unsigned long long *size, u32 *aspace,
+	u32 *cycle, u32 *dwidth)
+{
+	int retval;
+
+	spin_lock(&image->lock);
+
+	retval = __tsi148_master_get(image, enabled, vme_base, size, aspace,
+		cycle, dwidth);
+
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
+	size_t count, loff_t offset)
+{
+	int retval, enabled;
+	unsigned long long vme_base, size;
+	u32 aspace, cycle, dwidth;
+	struct vme_error_handler *handler = NULL;
+	struct vme_bridge *tsi148_bridge;
+	void __iomem *addr = image->kern_base + offset;
+	unsigned int done = 0;
+	unsigned int count32;
+
+	tsi148_bridge = image->parent;
+
+	spin_lock(&image->lock);
+
+	if (err_chk) {
+		__tsi148_master_get(image, &enabled, &vme_base, &size, &aspace,
+				    &cycle, &dwidth);
+		handler = vme_register_error_handler(tsi148_bridge, aspace,
+						     vme_base + offset, count);
+		if (!handler) {
+			spin_unlock(&image->lock);
+			return -ENOMEM;
+		}
+	}
+
+	/* The following code handles VME address alignment. We cannot use
+	 * memcpy_xxx here because it may cut data transfers in to 8-bit
+	 * cycles when D16 or D32 cycles are required on the VME bus.
+	 * On the other hand, the bridge itself assures that the maximum data
+	 * cycle configured for the transfer is used and splits it
+	 * automatically for non-aligned addresses, so we don't want the
+	 * overhead of needlessly forcing small transfers for the entire cycle.
+	 */
+	if ((uintptr_t)addr & 0x1) {
+		*(u8 *)buf = ioread8(addr);
+		done += 1;
+		if (done == count)
+			goto out;
+	}
+	if ((uintptr_t)(addr + done) & 0x2) {
+		if ((count - done) < 2) {
+			*(u8 *)(buf + done) = ioread8(addr + done);
+			done += 1;
+			goto out;
+		} else {
+			*(u16 *)(buf + done) = ioread16(addr + done);
+			done += 2;
+		}
+	}
+
+	count32 = (count - done) & ~0x3;
+	while (done < count32) {
+		*(u32 *)(buf + done) = ioread32(addr + done);
+		done += 4;
+	}
+
+	if ((count - done) & 0x2) {
+		*(u16 *)(buf + done) = ioread16(addr + done);
+		done += 2;
+	}
+	if ((count - done) & 0x1) {
+		*(u8 *)(buf + done) = ioread8(addr + done);
+		done += 1;
+	}
+
+out:
+	retval = count;
+
+	if (err_chk) {
+		if (handler->num_errors) {
+			dev_err(image->parent->parent,
+				"First VME read error detected an at address 0x%llx\n",
+				handler->first_error);
+			retval = handler->first_error - (vme_base + offset);
+		}
+		vme_unregister_error_handler(handler);
+	}
+
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+
+static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
+	size_t count, loff_t offset)
+{
+	int retval = 0, enabled;
+	unsigned long long vme_base, size;
+	u32 aspace, cycle, dwidth;
+	void __iomem *addr = image->kern_base + offset;
+	unsigned int done = 0;
+	unsigned int count32;
+
+	struct vme_error_handler *handler = NULL;
+	struct vme_bridge *tsi148_bridge;
+	struct tsi148_driver *bridge;
+
+	tsi148_bridge = image->parent;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	spin_lock(&image->lock);
+
+	if (err_chk) {
+		__tsi148_master_get(image, &enabled, &vme_base, &size, &aspace,
+				    &cycle, &dwidth);
+		handler = vme_register_error_handler(tsi148_bridge, aspace,
+						     vme_base + offset, count);
+		if (!handler) {
+			spin_unlock(&image->lock);
+			return -ENOMEM;
+		}
+	}
+
+	/* Here we apply for the same strategy we do in master_read
+	 * function in order to assure the correct cycles.
+	 */
+	if ((uintptr_t)addr & 0x1) {
+		iowrite8(*(u8 *)buf, addr);
+		done += 1;
+		if (done == count)
+			goto out;
+	}
+	if ((uintptr_t)(addr + done) & 0x2) {
+		if ((count - done) < 2) {
+			iowrite8(*(u8 *)(buf + done), addr + done);
+			done += 1;
+			goto out;
+		} else {
+			iowrite16(*(u16 *)(buf + done), addr + done);
+			done += 2;
+		}
+	}
+
+	count32 = (count - done) & ~0x3;
+	while (done < count32) {
+		iowrite32(*(u32 *)(buf + done), addr + done);
+		done += 4;
+	}
+
+	if ((count - done) & 0x2) {
+		iowrite16(*(u16 *)(buf + done), addr + done);
+		done += 2;
+	}
+	if ((count - done) & 0x1) {
+		iowrite8(*(u8 *)(buf + done), addr + done);
+		done += 1;
+	}
+
+out:
+	retval = count;
+
+	/*
+	 * Writes are posted. We need to do a read on the VME bus to flush out
+	 * all of the writes before we check for errors. We can't guarantee
+	 * that reading the data we have just written is safe. It is believed
+	 * that there isn't any read, write re-ordering, so we can read any
+	 * location in VME space, so lets read the Device ID from the tsi148's
+	 * own registers as mapped into CR/CSR space.
+	 *
+	 * We check for saved errors in the written address range/space.
+	 */
+
+	if (err_chk) {
+		ioread16(bridge->flush_image->kern_base + 0x7F000);
+
+		if (handler->num_errors) {
+			dev_warn(tsi148_bridge->parent,
+				 "First VME write error detected an at address 0x%llx\n",
+				 handler->first_error);
+			retval = handler->first_error - (vme_base + offset);
+		}
+		vme_unregister_error_handler(handler);
+	}
+
+	spin_unlock(&image->lock);
+
+	return retval;
+}
+
+/*
+ * Perform an RMW cycle on the VME bus.
+ *
+ * Requires a previously configured master window, returns final value.
+ */
+static unsigned int tsi148_master_rmw(struct vme_master_resource *image,
+	unsigned int mask, unsigned int compare, unsigned int swap,
+	loff_t offset)
+{
+	unsigned long long pci_addr;
+	unsigned int pci_addr_high, pci_addr_low;
+	u32 tmp, result;
+	int i;
+	struct tsi148_driver *bridge;
+
+	bridge = image->parent->driver_priv;
+
+	/* Find the PCI address that maps to the desired VME address */
+	i = image->number;
+
+	/* Locking as we can only do one of these at a time */
+	mutex_lock(&bridge->vme_rmw);
+
+	/* Lock image */
+	spin_lock(&image->lock);
+
+	pci_addr_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTSAU);
+	pci_addr_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
+		TSI148_LCSR_OFFSET_OTSAL);
+
+	reg_join(pci_addr_high, pci_addr_low, &pci_addr);
+	reg_split(pci_addr + offset, &pci_addr_high, &pci_addr_low);
+
+	/* Configure registers */
+	iowrite32be(mask, bridge->base + TSI148_LCSR_RMWEN);
+	iowrite32be(compare, bridge->base + TSI148_LCSR_RMWC);
+	iowrite32be(swap, bridge->base + TSI148_LCSR_RMWS);
+	iowrite32be(pci_addr_high, bridge->base + TSI148_LCSR_RMWAU);
+	iowrite32be(pci_addr_low, bridge->base + TSI148_LCSR_RMWAL);
+
+	/* Enable RMW */
+	tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL);
+	tmp |= TSI148_LCSR_VMCTRL_RMWEN;
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL);
+
+	/* Kick process off with a read to the required address. */
+	result = ioread32be(image->kern_base + offset);
+
+	/* Disable RMW */
+	tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL);
+	tmp &= ~TSI148_LCSR_VMCTRL_RMWEN;
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL);
+
+	spin_unlock(&image->lock);
+
+	mutex_unlock(&bridge->vme_rmw);
+
+	return result;
+}
+
+static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr,
+	u32 aspace, u32 cycle, u32 dwidth)
+{
+	u32 val;
+
+	val = be32_to_cpu(*attr);
+
+	/* Setup 2eSST speeds */
+	switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
+	case VME_2eSST160:
+		val |= TSI148_LCSR_DSAT_2eSSTM_160;
+		break;
+	case VME_2eSST267:
+		val |= TSI148_LCSR_DSAT_2eSSTM_267;
+		break;
+	case VME_2eSST320:
+		val |= TSI148_LCSR_DSAT_2eSSTM_320;
+		break;
+	}
+
+	/* Setup cycle types */
+	if (cycle & VME_SCT)
+		val |= TSI148_LCSR_DSAT_TM_SCT;
+
+	if (cycle & VME_BLT)
+		val |= TSI148_LCSR_DSAT_TM_BLT;
+
+	if (cycle & VME_MBLT)
+		val |= TSI148_LCSR_DSAT_TM_MBLT;
+
+	if (cycle & VME_2eVME)
+		val |= TSI148_LCSR_DSAT_TM_2eVME;
+
+	if (cycle & VME_2eSST)
+		val |= TSI148_LCSR_DSAT_TM_2eSST;
+
+	if (cycle & VME_2eSSTB) {
+		dev_err(dev, "Currently not setting Broadcast Select "
+			"Registers\n");
+		val |= TSI148_LCSR_DSAT_TM_2eSSTB;
+	}
+
+	/* Setup data width */
+	switch (dwidth) {
+	case VME_D16:
+		val |= TSI148_LCSR_DSAT_DBW_16;
+		break;
+	case VME_D32:
+		val |= TSI148_LCSR_DSAT_DBW_32;
+		break;
+	default:
+		dev_err(dev, "Invalid data width\n");
+		return -EINVAL;
+	}
+
+	/* Setup address space */
+	switch (aspace) {
+	case VME_A16:
+		val |= TSI148_LCSR_DSAT_AMODE_A16;
+		break;
+	case VME_A24:
+		val |= TSI148_LCSR_DSAT_AMODE_A24;
+		break;
+	case VME_A32:
+		val |= TSI148_LCSR_DSAT_AMODE_A32;
+		break;
+	case VME_A64:
+		val |= TSI148_LCSR_DSAT_AMODE_A64;
+		break;
+	case VME_CRCSR:
+		val |= TSI148_LCSR_DSAT_AMODE_CRCSR;
+		break;
+	case VME_USER1:
+		val |= TSI148_LCSR_DSAT_AMODE_USER1;
+		break;
+	case VME_USER2:
+		val |= TSI148_LCSR_DSAT_AMODE_USER2;
+		break;
+	case VME_USER3:
+		val |= TSI148_LCSR_DSAT_AMODE_USER3;
+		break;
+	case VME_USER4:
+		val |= TSI148_LCSR_DSAT_AMODE_USER4;
+		break;
+	default:
+		dev_err(dev, "Invalid address space\n");
+		return -EINVAL;
+		break;
+	}
+
+	if (cycle & VME_SUPER)
+		val |= TSI148_LCSR_DSAT_SUP;
+	if (cycle & VME_PROG)
+		val |= TSI148_LCSR_DSAT_PGM;
+
+	*attr = cpu_to_be32(val);
+
+	return 0;
+}
+
+static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr,
+	u32 aspace, u32 cycle, u32 dwidth)
+{
+	u32 val;
+
+	val = be32_to_cpu(*attr);
+
+	/* Setup 2eSST speeds */
+	switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
+	case VME_2eSST160:
+		val |= TSI148_LCSR_DDAT_2eSSTM_160;
+		break;
+	case VME_2eSST267:
+		val |= TSI148_LCSR_DDAT_2eSSTM_267;
+		break;
+	case VME_2eSST320:
+		val |= TSI148_LCSR_DDAT_2eSSTM_320;
+		break;
+	}
+
+	/* Setup cycle types */
+	if (cycle & VME_SCT)
+		val |= TSI148_LCSR_DDAT_TM_SCT;
+
+	if (cycle & VME_BLT)
+		val |= TSI148_LCSR_DDAT_TM_BLT;
+
+	if (cycle & VME_MBLT)
+		val |= TSI148_LCSR_DDAT_TM_MBLT;
+
+	if (cycle & VME_2eVME)
+		val |= TSI148_LCSR_DDAT_TM_2eVME;
+
+	if (cycle & VME_2eSST)
+		val |= TSI148_LCSR_DDAT_TM_2eSST;
+
+	if (cycle & VME_2eSSTB) {
+		dev_err(dev, "Currently not setting Broadcast Select "
+			"Registers\n");
+		val |= TSI148_LCSR_DDAT_TM_2eSSTB;
+	}
+
+	/* Setup data width */
+	switch (dwidth) {
+	case VME_D16:
+		val |= TSI148_LCSR_DDAT_DBW_16;
+		break;
+	case VME_D32:
+		val |= TSI148_LCSR_DDAT_DBW_32;
+		break;
+	default:
+		dev_err(dev, "Invalid data width\n");
+		return -EINVAL;
+	}
+
+	/* Setup address space */
+	switch (aspace) {
+	case VME_A16:
+		val |= TSI148_LCSR_DDAT_AMODE_A16;
+		break;
+	case VME_A24:
+		val |= TSI148_LCSR_DDAT_AMODE_A24;
+		break;
+	case VME_A32:
+		val |= TSI148_LCSR_DDAT_AMODE_A32;
+		break;
+	case VME_A64:
+		val |= TSI148_LCSR_DDAT_AMODE_A64;
+		break;
+	case VME_CRCSR:
+		val |= TSI148_LCSR_DDAT_AMODE_CRCSR;
+		break;
+	case VME_USER1:
+		val |= TSI148_LCSR_DDAT_AMODE_USER1;
+		break;
+	case VME_USER2:
+		val |= TSI148_LCSR_DDAT_AMODE_USER2;
+		break;
+	case VME_USER3:
+		val |= TSI148_LCSR_DDAT_AMODE_USER3;
+		break;
+	case VME_USER4:
+		val |= TSI148_LCSR_DDAT_AMODE_USER4;
+		break;
+	default:
+		dev_err(dev, "Invalid address space\n");
+		return -EINVAL;
+		break;
+	}
+
+	if (cycle & VME_SUPER)
+		val |= TSI148_LCSR_DDAT_SUP;
+	if (cycle & VME_PROG)
+		val |= TSI148_LCSR_DDAT_PGM;
+
+	*attr = cpu_to_be32(val);
+
+	return 0;
+}
+
+/*
+ * Add a link list descriptor to the list
+ *
+ * Note: DMA engine expects the DMA descriptor to be big endian.
+ */
+static int tsi148_dma_list_add(struct vme_dma_list *list,
+	struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count)
+{
+	struct tsi148_dma_entry *entry, *prev;
+	u32 address_high, address_low, val;
+	struct vme_dma_pattern *pattern_attr;
+	struct vme_dma_pci *pci_attr;
+	struct vme_dma_vme *vme_attr;
+	int retval = 0;
+	struct vme_bridge *tsi148_bridge;
+
+	tsi148_bridge = list->parent->parent;
+
+	/* Descriptor must be aligned on 64-bit boundaries */
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
+		retval = -ENOMEM;
+		goto err_mem;
+	}
+
+	/* Test descriptor alignment */
+	if ((unsigned long)&entry->descriptor & 0x7) {
+		dev_err(tsi148_bridge->parent, "Descriptor not aligned to 8 "
+			"byte boundary as required: %p\n",
+			&entry->descriptor);
+		retval = -EINVAL;
+		goto err_align;
+	}
+
+	/* Given we are going to fill out the structure, we probably don't
+	 * need to zero it, but better safe than sorry for now.
+	 */
+	memset(&entry->descriptor, 0, sizeof(entry->descriptor));
+
+	/* Fill out source part */
+	switch (src->type) {
+	case VME_DMA_PATTERN:
+		pattern_attr = src->private;
+
+		entry->descriptor.dsal = cpu_to_be32(pattern_attr->pattern);
+
+		val = TSI148_LCSR_DSAT_TYP_PAT;
+
+		/* Default behaviour is 32 bit pattern */
+		if (pattern_attr->type & VME_DMA_PATTERN_BYTE)
+			val |= TSI148_LCSR_DSAT_PSZ;
+
+		/* It seems that the default behaviour is to increment */
+		if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0)
+			val |= TSI148_LCSR_DSAT_NIN;
+		entry->descriptor.dsat = cpu_to_be32(val);
+		break;
+	case VME_DMA_PCI:
+		pci_attr = src->private;
+
+		reg_split((unsigned long long)pci_attr->address, &address_high,
+			&address_low);
+		entry->descriptor.dsau = cpu_to_be32(address_high);
+		entry->descriptor.dsal = cpu_to_be32(address_low);
+		entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_PCI);
+		break;
+	case VME_DMA_VME:
+		vme_attr = src->private;
+
+		reg_split((unsigned long long)vme_attr->address, &address_high,
+			&address_low);
+		entry->descriptor.dsau = cpu_to_be32(address_high);
+		entry->descriptor.dsal = cpu_to_be32(address_low);
+		entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_VME);
+
+		retval = tsi148_dma_set_vme_src_attributes(
+			tsi148_bridge->parent, &entry->descriptor.dsat,
+			vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth);
+		if (retval < 0)
+			goto err_source;
+		break;
+	default:
+		dev_err(tsi148_bridge->parent, "Invalid source type\n");
+		retval = -EINVAL;
+		goto err_source;
+		break;
+	}
+
+	/* Assume last link - this will be over-written by adding another */
+	entry->descriptor.dnlau = cpu_to_be32(0);
+	entry->descriptor.dnlal = cpu_to_be32(TSI148_LCSR_DNLAL_LLA);
+
+	/* Fill out destination part */
+	switch (dest->type) {
+	case VME_DMA_PCI:
+		pci_attr = dest->private;
+
+		reg_split((unsigned long long)pci_attr->address, &address_high,
+			&address_low);
+		entry->descriptor.ddau = cpu_to_be32(address_high);
+		entry->descriptor.ddal = cpu_to_be32(address_low);
+		entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_PCI);
+		break;
+	case VME_DMA_VME:
+		vme_attr = dest->private;
+
+		reg_split((unsigned long long)vme_attr->address, &address_high,
+			&address_low);
+		entry->descriptor.ddau = cpu_to_be32(address_high);
+		entry->descriptor.ddal = cpu_to_be32(address_low);
+		entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_VME);
+
+		retval = tsi148_dma_set_vme_dest_attributes(
+			tsi148_bridge->parent, &entry->descriptor.ddat,
+			vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth);
+		if (retval < 0)
+			goto err_dest;
+		break;
+	default:
+		dev_err(tsi148_bridge->parent, "Invalid destination type\n");
+		retval = -EINVAL;
+		goto err_dest;
+		break;
+	}
+
+	/* Fill out count */
+	entry->descriptor.dcnt = cpu_to_be32((u32)count);
+
+	/* Add to list */
+	list_add_tail(&entry->list, &list->entries);
+
+	entry->dma_handle = dma_map_single(tsi148_bridge->parent,
+					   &entry->descriptor,
+					   sizeof(entry->descriptor),
+					   DMA_TO_DEVICE);
+	if (dma_mapping_error(tsi148_bridge->parent, entry->dma_handle)) {
+		dev_err(tsi148_bridge->parent, "DMA mapping error\n");
+		retval = -EINVAL;
+		goto err_dma;
+	}
+
+	/* Fill out previous descriptors "Next Address" */
+	if (entry->list.prev != &list->entries) {
+		reg_split((unsigned long long)entry->dma_handle, &address_high,
+			&address_low);
+		prev = list_entry(entry->list.prev, struct tsi148_dma_entry,
+				  list);
+		prev->descriptor.dnlau = cpu_to_be32(address_high);
+		prev->descriptor.dnlal = cpu_to_be32(address_low);
+
+	}
+
+	return 0;
+
+err_dma:
+	list_del(&entry->list);
+err_dest:
+err_source:
+err_align:
+		kfree(entry);
+err_mem:
+	return retval;
+}
+
+/*
+ * Check to see if the provided DMA channel is busy.
+ */
+static int tsi148_dma_busy(struct vme_bridge *tsi148_bridge, int channel)
+{
+	u32 tmp;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	tmp = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] +
+		TSI148_LCSR_OFFSET_DSTA);
+
+	if (tmp & TSI148_LCSR_DSTA_BSY)
+		return 0;
+	else
+		return 1;
+
+}
+
+/*
+ * Execute a previously generated link list
+ *
+ * XXX Need to provide control register configuration.
+ */
+static int tsi148_dma_list_exec(struct vme_dma_list *list)
+{
+	struct vme_dma_resource *ctrlr;
+	int channel, retval;
+	struct tsi148_dma_entry *entry;
+	u32 bus_addr_high, bus_addr_low;
+	u32 val, dctlreg = 0;
+	struct vme_bridge *tsi148_bridge;
+	struct tsi148_driver *bridge;
+
+	ctrlr = list->parent;
+
+	tsi148_bridge = ctrlr->parent;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	mutex_lock(&ctrlr->mtx);
+
+	channel = ctrlr->number;
+
+	if (!list_empty(&ctrlr->running)) {
+		/*
+		 * XXX We have an active DMA transfer and currently haven't
+		 *     sorted out the mechanism for "pending" DMA transfers.
+		 *     Return busy.
+		 */
+		/* Need to add to pending here */
+		mutex_unlock(&ctrlr->mtx);
+		return -EBUSY;
+	} else {
+		list_add(&list->list, &ctrlr->running);
+	}
+
+	/* Get first bus address and write into registers */
+	entry = list_first_entry(&list->entries, struct tsi148_dma_entry,
+		list);
+
+	mutex_unlock(&ctrlr->mtx);
+
+	reg_split(entry->dma_handle, &bus_addr_high, &bus_addr_low);
+
+	iowrite32be(bus_addr_high, bridge->base +
+		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU);
+	iowrite32be(bus_addr_low, bridge->base +
+		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL);
+
+	dctlreg = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] +
+		TSI148_LCSR_OFFSET_DCTL);
+
+	/* Start the operation */
+	iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base +
+		TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL);
+
+	retval = wait_event_interruptible(bridge->dma_queue[channel],
+		tsi148_dma_busy(ctrlr->parent, channel));
+
+	if (retval) {
+		iowrite32be(dctlreg | TSI148_LCSR_DCTL_ABT, bridge->base +
+			TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL);
+		/* Wait for the operation to abort */
+		wait_event(bridge->dma_queue[channel],
+			   tsi148_dma_busy(ctrlr->parent, channel));
+		retval = -EINTR;
+		goto exit;
+	}
+
+	/*
+	 * Read status register, this register is valid until we kick off a
+	 * new transfer.
+	 */
+	val = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] +
+		TSI148_LCSR_OFFSET_DSTA);
+
+	if (val & TSI148_LCSR_DSTA_VBE) {
+		dev_err(tsi148_bridge->parent, "DMA Error. DSTA=%08X\n", val);
+		retval = -EIO;
+	}
+
+exit:
+	/* Remove list from running list */
+	mutex_lock(&ctrlr->mtx);
+	list_del(&list->list);
+	mutex_unlock(&ctrlr->mtx);
+
+	return retval;
+}
+
+/*
+ * Clean up a previously generated link list
+ *
+ * We have a separate function, don't assume that the chain can't be reused.
+ */
+static int tsi148_dma_list_empty(struct vme_dma_list *list)
+{
+	struct list_head *pos, *temp;
+	struct tsi148_dma_entry *entry;
+
+	struct vme_bridge *tsi148_bridge = list->parent->parent;
+
+	/* detach and free each entry */
+	list_for_each_safe(pos, temp, &list->entries) {
+		list_del(pos);
+		entry = list_entry(pos, struct tsi148_dma_entry, list);
+
+		dma_unmap_single(tsi148_bridge->parent, entry->dma_handle,
+			sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
+		kfree(entry);
+	}
+
+	return 0;
+}
+
+/*
+ * All 4 location monitors reside at the same base - this is therefore a
+ * system wide configuration.
+ *
+ * This does not enable the LM monitor - that should be done when the first
+ * callback is attached and disabled when the last callback is removed.
+ */
+static int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base,
+	u32 aspace, u32 cycle)
+{
+	u32 lm_base_high, lm_base_low, lm_ctl = 0;
+	int i;
+	struct vme_bridge *tsi148_bridge;
+	struct tsi148_driver *bridge;
+
+	tsi148_bridge = lm->parent;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	/* If we already have a callback attached, we can't move it! */
+	for (i = 0; i < lm->monitors; i++) {
+		if (bridge->lm_callback[i]) {
+			mutex_unlock(&lm->mtx);
+			dev_err(tsi148_bridge->parent, "Location monitor "
+				"callback attached, can't reset\n");
+			return -EBUSY;
+		}
+	}
+
+	switch (aspace) {
+	case VME_A16:
+		lm_ctl |= TSI148_LCSR_LMAT_AS_A16;
+		break;
+	case VME_A24:
+		lm_ctl |= TSI148_LCSR_LMAT_AS_A24;
+		break;
+	case VME_A32:
+		lm_ctl |= TSI148_LCSR_LMAT_AS_A32;
+		break;
+	case VME_A64:
+		lm_ctl |= TSI148_LCSR_LMAT_AS_A64;
+		break;
+	default:
+		mutex_unlock(&lm->mtx);
+		dev_err(tsi148_bridge->parent, "Invalid address space\n");
+		return -EINVAL;
+		break;
+	}
+
+	if (cycle & VME_SUPER)
+		lm_ctl |= TSI148_LCSR_LMAT_SUPR ;
+	if (cycle & VME_USER)
+		lm_ctl |= TSI148_LCSR_LMAT_NPRIV;
+	if (cycle & VME_PROG)
+		lm_ctl |= TSI148_LCSR_LMAT_PGM;
+	if (cycle & VME_DATA)
+		lm_ctl |= TSI148_LCSR_LMAT_DATA;
+
+	reg_split(lm_base, &lm_base_high, &lm_base_low);
+
+	iowrite32be(lm_base_high, bridge->base + TSI148_LCSR_LMBAU);
+	iowrite32be(lm_base_low, bridge->base + TSI148_LCSR_LMBAL);
+	iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT);
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+/* Get configuration of the callback monitor and return whether it is enabled
+ * or disabled.
+ */
+static int tsi148_lm_get(struct vme_lm_resource *lm,
+	unsigned long long *lm_base, u32 *aspace, u32 *cycle)
+{
+	u32 lm_base_high, lm_base_low, lm_ctl, enabled = 0;
+	struct tsi148_driver *bridge;
+
+	bridge = lm->parent->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	lm_base_high = ioread32be(bridge->base + TSI148_LCSR_LMBAU);
+	lm_base_low = ioread32be(bridge->base + TSI148_LCSR_LMBAL);
+	lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT);
+
+	reg_join(lm_base_high, lm_base_low, lm_base);
+
+	if (lm_ctl & TSI148_LCSR_LMAT_EN)
+		enabled = 1;
+
+	if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A16)
+		*aspace |= VME_A16;
+
+	if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A24)
+		*aspace |= VME_A24;
+
+	if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A32)
+		*aspace |= VME_A32;
+
+	if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A64)
+		*aspace |= VME_A64;
+
+
+	if (lm_ctl & TSI148_LCSR_LMAT_SUPR)
+		*cycle |= VME_SUPER;
+	if (lm_ctl & TSI148_LCSR_LMAT_NPRIV)
+		*cycle |= VME_USER;
+	if (lm_ctl & TSI148_LCSR_LMAT_PGM)
+		*cycle |= VME_PROG;
+	if (lm_ctl & TSI148_LCSR_LMAT_DATA)
+		*cycle |= VME_DATA;
+
+	mutex_unlock(&lm->mtx);
+
+	return enabled;
+}
+
+/*
+ * Attach a callback to a specific location monitor.
+ *
+ * Callback will be passed the monitor triggered.
+ */
+static int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor,
+	void (*callback)(void *), void *data)
+{
+	u32 lm_ctl, tmp;
+	struct vme_bridge *tsi148_bridge;
+	struct tsi148_driver *bridge;
+
+	tsi148_bridge = lm->parent;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	/* Ensure that the location monitor is configured - need PGM or DATA */
+	lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT);
+	if ((lm_ctl & (TSI148_LCSR_LMAT_PGM | TSI148_LCSR_LMAT_DATA)) == 0) {
+		mutex_unlock(&lm->mtx);
+		dev_err(tsi148_bridge->parent, "Location monitor not properly "
+			"configured\n");
+		return -EINVAL;
+	}
+
+	/* Check that a callback isn't already attached */
+	if (bridge->lm_callback[monitor]) {
+		mutex_unlock(&lm->mtx);
+		dev_err(tsi148_bridge->parent, "Existing callback attached\n");
+		return -EBUSY;
+	}
+
+	/* Attach callback */
+	bridge->lm_callback[monitor] = callback;
+	bridge->lm_data[monitor] = data;
+
+	/* Enable Location Monitor interrupt */
+	tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN);
+	tmp |= TSI148_LCSR_INTEN_LMEN[monitor];
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN);
+
+	tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO);
+	tmp |= TSI148_LCSR_INTEO_LMEO[monitor];
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
+
+	/* Ensure that global Location Monitor Enable set */
+	if ((lm_ctl & TSI148_LCSR_LMAT_EN) == 0) {
+		lm_ctl |= TSI148_LCSR_LMAT_EN;
+		iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT);
+	}
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+/*
+ * Detach a callback function forn a specific location monitor.
+ */
+static int tsi148_lm_detach(struct vme_lm_resource *lm, int monitor)
+{
+	u32 lm_en, tmp;
+	struct tsi148_driver *bridge;
+
+	bridge = lm->parent->driver_priv;
+
+	mutex_lock(&lm->mtx);
+
+	/* Disable Location Monitor and ensure previous interrupts are clear */
+	lm_en = ioread32be(bridge->base + TSI148_LCSR_INTEN);
+	lm_en &= ~TSI148_LCSR_INTEN_LMEN[monitor];
+	iowrite32be(lm_en, bridge->base + TSI148_LCSR_INTEN);
+
+	tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO);
+	tmp &= ~TSI148_LCSR_INTEO_LMEO[monitor];
+	iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
+
+	iowrite32be(TSI148_LCSR_INTC_LMC[monitor],
+		 bridge->base + TSI148_LCSR_INTC);
+
+	/* Detach callback */
+	bridge->lm_callback[monitor] = NULL;
+	bridge->lm_data[monitor] = NULL;
+
+	/* If all location monitors disabled, disable global Location Monitor */
+	if ((lm_en & (TSI148_LCSR_INTS_LM0S | TSI148_LCSR_INTS_LM1S |
+			TSI148_LCSR_INTS_LM2S | TSI148_LCSR_INTS_LM3S)) == 0) {
+		tmp = ioread32be(bridge->base + TSI148_LCSR_LMAT);
+		tmp &= ~TSI148_LCSR_LMAT_EN;
+		iowrite32be(tmp, bridge->base + TSI148_LCSR_LMAT);
+	}
+
+	mutex_unlock(&lm->mtx);
+
+	return 0;
+}
+
+/*
+ * Determine Geographical Addressing
+ */
+static int tsi148_slot_get(struct vme_bridge *tsi148_bridge)
+{
+	u32 slot = 0;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	if (!geoid) {
+		slot = ioread32be(bridge->base + TSI148_LCSR_VSTAT);
+		slot = slot & TSI148_LCSR_VSTAT_GA_M;
+	} else
+		slot = geoid;
+
+	return (int)slot;
+}
+
+static void *tsi148_alloc_consistent(struct device *parent, size_t size,
+	dma_addr_t *dma)
+{
+	struct pci_dev *pdev;
+
+	/* Find pci_dev container of dev */
+	pdev = to_pci_dev(parent);
+
+	return pci_alloc_consistent(pdev, size, dma);
+}
+
+static void tsi148_free_consistent(struct device *parent, size_t size,
+	void *vaddr, dma_addr_t dma)
+{
+	struct pci_dev *pdev;
+
+	/* Find pci_dev container of dev */
+	pdev = to_pci_dev(parent);
+
+	pci_free_consistent(pdev, size, vaddr, dma);
+}
+
+/*
+ * Configure CR/CSR space
+ *
+ * Access to the CR/CSR can be configured at power-up. The location of the
+ * CR/CSR registers in the CR/CSR address space is determined by the boards
+ * Auto-ID or Geographic address. This function ensures that the window is
+ * enabled at an offset consistent with the boards geopgraphic address.
+ *
+ * Each board has a 512kB window, with the highest 4kB being used for the
+ * boards registers, this means there is a fix length 508kB window which must
+ * be mapped onto PCI memory.
+ */
+static int tsi148_crcsr_init(struct vme_bridge *tsi148_bridge,
+	struct pci_dev *pdev)
+{
+	u32 cbar, crat, vstat;
+	u32 crcsr_bus_high, crcsr_bus_low;
+	int retval;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	/* Allocate mem for CR/CSR image */
+	bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
+						     &bridge->crcsr_bus);
+	if (!bridge->crcsr_kernel) {
+		dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
+			"CR/CSR image\n");
+		return -ENOMEM;
+	}
+
+	reg_split(bridge->crcsr_bus, &crcsr_bus_high, &crcsr_bus_low);
+
+	iowrite32be(crcsr_bus_high, bridge->base + TSI148_LCSR_CROU);
+	iowrite32be(crcsr_bus_low, bridge->base + TSI148_LCSR_CROL);
+
+	/* Ensure that the CR/CSR is configured at the correct offset */
+	cbar = ioread32be(bridge->base + TSI148_CBAR);
+	cbar = (cbar & TSI148_CRCSR_CBAR_M)>>3;
+
+	vstat = tsi148_slot_get(tsi148_bridge);
+
+	if (cbar != vstat) {
+		cbar = vstat;
+		dev_info(tsi148_bridge->parent, "Setting CR/CSR offset\n");
+		iowrite32be(cbar<<3, bridge->base + TSI148_CBAR);
+	}
+	dev_info(tsi148_bridge->parent, "CR/CSR Offset: %d\n", cbar);
+
+	crat = ioread32be(bridge->base + TSI148_LCSR_CRAT);
+	if (crat & TSI148_LCSR_CRAT_EN)
+		dev_info(tsi148_bridge->parent, "CR/CSR already enabled\n");
+	else {
+		dev_info(tsi148_bridge->parent, "Enabling CR/CSR space\n");
+		iowrite32be(crat | TSI148_LCSR_CRAT_EN,
+			bridge->base + TSI148_LCSR_CRAT);
+	}
+
+	/* If we want flushed, error-checked writes, set up a window
+	 * over the CR/CSR registers. We read from here to safely flush
+	 * through VME writes.
+	 */
+	if (err_chk) {
+		retval = tsi148_master_set(bridge->flush_image, 1,
+			(vstat * 0x80000), 0x80000, VME_CRCSR, VME_SCT,
+			VME_D16);
+		if (retval)
+			dev_err(tsi148_bridge->parent, "Configuring flush image"
+				" failed\n");
+	}
+
+	return 0;
+
+}
+
+static void tsi148_crcsr_exit(struct vme_bridge *tsi148_bridge,
+	struct pci_dev *pdev)
+{
+	u32 crat;
+	struct tsi148_driver *bridge;
+
+	bridge = tsi148_bridge->driver_priv;
+
+	/* Turn off CR/CSR space */
+	crat = ioread32be(bridge->base + TSI148_LCSR_CRAT);
+	iowrite32be(crat & ~TSI148_LCSR_CRAT_EN,
+		bridge->base + TSI148_LCSR_CRAT);
+
+	/* Free image */
+	iowrite32be(0, bridge->base + TSI148_LCSR_CROU);
+	iowrite32be(0, bridge->base + TSI148_LCSR_CROL);
+
+	pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel,
+		bridge->crcsr_bus);
+}
+
+static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	int retval, i, master_num;
+	u32 data;
+	struct list_head *pos = NULL, *n;
+	struct vme_bridge *tsi148_bridge;
+	struct tsi148_driver *tsi148_device;
+	struct vme_master_resource *master_image;
+	struct vme_slave_resource *slave_image;
+	struct vme_dma_resource *dma_ctrlr;
+	struct vme_lm_resource *lm;
+
+	/* If we want to support more than one of each bridge, we need to
+	 * dynamically generate this so we get one per device
+	 */
+	tsi148_bridge = kzalloc(sizeof(*tsi148_bridge), GFP_KERNEL);
+	if (!tsi148_bridge) {
+		retval = -ENOMEM;
+		goto err_struct;
+	}
+	vme_init_bridge(tsi148_bridge);
+
+	tsi148_device = kzalloc(sizeof(*tsi148_device), GFP_KERNEL);
+	if (!tsi148_device) {
+		retval = -ENOMEM;
+		goto err_driver;
+	}
+
+	tsi148_bridge->driver_priv = tsi148_device;
+
+	/* Enable the device */
+	retval = pci_enable_device(pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "Unable to enable device\n");
+		goto err_enable;
+	}
+
+	/* Map Registers */
+	retval = pci_request_regions(pdev, driver_name);
+	if (retval) {
+		dev_err(&pdev->dev, "Unable to reserve resources\n");
+		goto err_resource;
+	}
+
+	/* map registers in BAR 0 */
+	tsi148_device->base = ioremap(pci_resource_start(pdev, 0),
+		4096);
+	if (!tsi148_device->base) {
+		dev_err(&pdev->dev, "Unable to remap CRG region\n");
+		retval = -EIO;
+		goto err_remap;
+	}
+
+	/* Check to see if the mapping worked out */
+	data = ioread32(tsi148_device->base + TSI148_PCFS_ID) & 0x0000FFFF;
+	if (data != PCI_VENDOR_ID_TUNDRA) {
+		dev_err(&pdev->dev, "CRG region check failed\n");
+		retval = -EIO;
+		goto err_test;
+	}
+
+	/* Initialize wait queues & mutual exclusion flags */
+	init_waitqueue_head(&tsi148_device->dma_queue[0]);
+	init_waitqueue_head(&tsi148_device->dma_queue[1]);
+	init_waitqueue_head(&tsi148_device->iack_queue);
+	mutex_init(&tsi148_device->vme_int);
+	mutex_init(&tsi148_device->vme_rmw);
+
+	tsi148_bridge->parent = &pdev->dev;
+	strcpy(tsi148_bridge->name, driver_name);
+
+	/* Setup IRQ */
+	retval = tsi148_irq_init(tsi148_bridge);
+	if (retval != 0) {
+		dev_err(&pdev->dev, "Chip Initialization failed.\n");
+		goto err_irq;
+	}
+
+	/* If we are going to flush writes, we need to read from the VME bus.
+	 * We need to do this safely, thus we read the devices own CR/CSR
+	 * register. To do this we must set up a window in CR/CSR space and
+	 * hence have one less master window resource available.
+	 */
+	master_num = TSI148_MAX_MASTER;
+	if (err_chk) {
+		master_num--;
+
+		tsi148_device->flush_image =
+			kmalloc(sizeof(*tsi148_device->flush_image),
+				GFP_KERNEL);
+		if (!tsi148_device->flush_image) {
+			retval = -ENOMEM;
+			goto err_master;
+		}
+		tsi148_device->flush_image->parent = tsi148_bridge;
+		spin_lock_init(&tsi148_device->flush_image->lock);
+		tsi148_device->flush_image->locked = 1;
+		tsi148_device->flush_image->number = master_num;
+		memset(&tsi148_device->flush_image->bus_resource, 0,
+		       sizeof(tsi148_device->flush_image->bus_resource));
+		tsi148_device->flush_image->kern_base  = NULL;
+	}
+
+	/* Add master windows to list */
+	for (i = 0; i < master_num; i++) {
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
+			retval = -ENOMEM;
+			goto err_master;
+		}
+		master_image->parent = tsi148_bridge;
+		spin_lock_init(&master_image->lock);
+		master_image->locked = 0;
+		master_image->number = i;
+		master_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
+			VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 |
+			VME_USER3 | VME_USER4;
+		master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
+			VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
+			VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
+			VME_PROG | VME_DATA;
+		master_image->width_attr = VME_D16 | VME_D32;
+		memset(&master_image->bus_resource, 0,
+		       sizeof(master_image->bus_resource));
+		master_image->kern_base  = NULL;
+		list_add_tail(&master_image->list,
+			&tsi148_bridge->master_resources);
+	}
+
+	/* Add slave windows to list */
+	for (i = 0; i < TSI148_MAX_SLAVE; i++) {
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
+			retval = -ENOMEM;
+			goto err_slave;
+		}
+		slave_image->parent = tsi148_bridge;
+		mutex_init(&slave_image->mtx);
+		slave_image->locked = 0;
+		slave_image->number = i;
+		slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
+			VME_A64;
+		slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
+			VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
+			VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
+			VME_PROG | VME_DATA;
+		list_add_tail(&slave_image->list,
+			&tsi148_bridge->slave_resources);
+	}
+
+	/* Add dma engines to list */
+	for (i = 0; i < TSI148_MAX_DMA; i++) {
+		dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL);
+		if (!dma_ctrlr) {
+			retval = -ENOMEM;
+			goto err_dma;
+		}
+		dma_ctrlr->parent = tsi148_bridge;
+		mutex_init(&dma_ctrlr->mtx);
+		dma_ctrlr->locked = 0;
+		dma_ctrlr->number = i;
+		dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM |
+			VME_DMA_MEM_TO_VME | VME_DMA_VME_TO_VME |
+			VME_DMA_MEM_TO_MEM | VME_DMA_PATTERN_TO_VME |
+			VME_DMA_PATTERN_TO_MEM;
+		INIT_LIST_HEAD(&dma_ctrlr->pending);
+		INIT_LIST_HEAD(&dma_ctrlr->running);
+		list_add_tail(&dma_ctrlr->list,
+			&tsi148_bridge->dma_resources);
+	}
+
+	/* Add location monitor to list */
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
+		retval = -ENOMEM;
+		goto err_lm;
+	}
+	lm->parent = tsi148_bridge;
+	mutex_init(&lm->mtx);
+	lm->locked = 0;
+	lm->number = 1;
+	lm->monitors = 4;
+	list_add_tail(&lm->list, &tsi148_bridge->lm_resources);
+
+	tsi148_bridge->slave_get = tsi148_slave_get;
+	tsi148_bridge->slave_set = tsi148_slave_set;
+	tsi148_bridge->master_get = tsi148_master_get;
+	tsi148_bridge->master_set = tsi148_master_set;
+	tsi148_bridge->master_read = tsi148_master_read;
+	tsi148_bridge->master_write = tsi148_master_write;
+	tsi148_bridge->master_rmw = tsi148_master_rmw;
+	tsi148_bridge->dma_list_add = tsi148_dma_list_add;
+	tsi148_bridge->dma_list_exec = tsi148_dma_list_exec;
+	tsi148_bridge->dma_list_empty = tsi148_dma_list_empty;
+	tsi148_bridge->irq_set = tsi148_irq_set;
+	tsi148_bridge->irq_generate = tsi148_irq_generate;
+	tsi148_bridge->lm_set = tsi148_lm_set;
+	tsi148_bridge->lm_get = tsi148_lm_get;
+	tsi148_bridge->lm_attach = tsi148_lm_attach;
+	tsi148_bridge->lm_detach = tsi148_lm_detach;
+	tsi148_bridge->slot_get = tsi148_slot_get;
+	tsi148_bridge->alloc_consistent = tsi148_alloc_consistent;
+	tsi148_bridge->free_consistent = tsi148_free_consistent;
+
+	data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT);
+	dev_info(&pdev->dev, "Board is%s the VME system controller\n",
+		(data & TSI148_LCSR_VSTAT_SCONS) ? "" : " not");
+	if (!geoid)
+		dev_info(&pdev->dev, "VME geographical address is %d\n",
+			data & TSI148_LCSR_VSTAT_GA_M);
+	else
+		dev_info(&pdev->dev, "VME geographical address is set to %d\n",
+			geoid);
+
+	dev_info(&pdev->dev, "VME Write and flush and error check is %s\n",
+		err_chk ? "enabled" : "disabled");
+
+	retval = tsi148_crcsr_init(tsi148_bridge, pdev);
+	if (retval) {
+		dev_err(&pdev->dev, "CR/CSR configuration failed.\n");
+		goto err_crcsr;
+	}
+
+	retval = vme_register_bridge(tsi148_bridge);
+	if (retval != 0) {
+		dev_err(&pdev->dev, "Chip Registration failed.\n");
+		goto err_reg;
+	}
+
+	pci_set_drvdata(pdev, tsi148_bridge);
+
+	/* Clear VME bus "board fail", and "power-up reset" lines */
+	data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT);
+	data &= ~TSI148_LCSR_VSTAT_BRDFL;
+	data |= TSI148_LCSR_VSTAT_CPURST;
+	iowrite32be(data, tsi148_device->base + TSI148_LCSR_VSTAT);
+
+	return 0;
+
+err_reg:
+	tsi148_crcsr_exit(tsi148_bridge, pdev);
+err_crcsr:
+err_lm:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &tsi148_bridge->lm_resources) {
+		lm = list_entry(pos, struct vme_lm_resource, list);
+		list_del(pos);
+		kfree(lm);
+	}
+err_dma:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &tsi148_bridge->dma_resources) {
+		dma_ctrlr = list_entry(pos, struct vme_dma_resource, list);
+		list_del(pos);
+		kfree(dma_ctrlr);
+	}
+err_slave:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &tsi148_bridge->slave_resources) {
+		slave_image = list_entry(pos, struct vme_slave_resource, list);
+		list_del(pos);
+		kfree(slave_image);
+	}
+err_master:
+	/* resources are stored in link list */
+	list_for_each_safe(pos, n, &tsi148_bridge->master_resources) {
+		master_image = list_entry(pos, struct vme_master_resource,
+			list);
+		list_del(pos);
+		kfree(master_image);
+	}
+
+	tsi148_irq_exit(tsi148_bridge, pdev);
+err_irq:
+err_test:
+	iounmap(tsi148_device->base);
+err_remap:
+	pci_release_regions(pdev);
+err_resource:
+	pci_disable_device(pdev);
+err_enable:
+	kfree(tsi148_device);
+err_driver:
+	kfree(tsi148_bridge);
+err_struct:
+	return retval;
+
+}
+
+static void tsi148_remove(struct pci_dev *pdev)
+{
+	struct list_head *pos = NULL;
+	struct list_head *tmplist;
+	struct vme_master_resource *master_image;
+	struct vme_slave_resource *slave_image;
+	struct vme_dma_resource *dma_ctrlr;
+	int i;
+	struct tsi148_driver *bridge;
+	struct vme_bridge *tsi148_bridge = pci_get_drvdata(pdev);
+
+	bridge = tsi148_bridge->driver_priv;
+
+
+	dev_dbg(&pdev->dev, "Driver is being unloaded.\n");
+
+	/*
+	 *  Shutdown all inbound and outbound windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		iowrite32be(0, bridge->base + TSI148_LCSR_IT[i] +
+			TSI148_LCSR_OFFSET_ITAT);
+		iowrite32be(0, bridge->base + TSI148_LCSR_OT[i] +
+			TSI148_LCSR_OFFSET_OTAT);
+	}
+
+	/*
+	 *  Shutdown Location monitor.
+	 */
+	iowrite32be(0, bridge->base + TSI148_LCSR_LMAT);
+
+	/*
+	 *  Shutdown CRG map.
+	 */
+	iowrite32be(0, bridge->base + TSI148_LCSR_CSRAT);
+
+	/*
+	 *  Clear error status.
+	 */
+	iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_EDPAT);
+	iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_VEAT);
+	iowrite32be(0x07000700, bridge->base + TSI148_LCSR_PSTAT);
+
+	/*
+	 *  Remove VIRQ interrupt (if any)
+	 */
+	if (ioread32be(bridge->base + TSI148_LCSR_VICR) & 0x800)
+		iowrite32be(0x8000, bridge->base + TSI148_LCSR_VICR);
+
+	/*
+	 *  Map all Interrupts to PCI INTA
+	 */
+	iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM1);
+	iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM2);
+
+	tsi148_irq_exit(tsi148_bridge, pdev);
+
+	vme_unregister_bridge(tsi148_bridge);
+
+	tsi148_crcsr_exit(tsi148_bridge, pdev);
+
+	/* resources are stored in link list */
+	list_for_each_safe(pos, tmplist, &tsi148_bridge->dma_resources) {
+		dma_ctrlr = list_entry(pos, struct vme_dma_resource, list);
+		list_del(pos);
+		kfree(dma_ctrlr);
+	}
+
+	/* resources are stored in link list */
+	list_for_each_safe(pos, tmplist, &tsi148_bridge->slave_resources) {
+		slave_image = list_entry(pos, struct vme_slave_resource, list);
+		list_del(pos);
+		kfree(slave_image);
+	}
+
+	/* resources are stored in link list */
+	list_for_each_safe(pos, tmplist, &tsi148_bridge->master_resources) {
+		master_image = list_entry(pos, struct vme_master_resource,
+			list);
+		list_del(pos);
+		kfree(master_image);
+	}
+
+	iounmap(bridge->base);
+
+	pci_release_regions(pdev);
+
+	pci_disable_device(pdev);
+
+	kfree(tsi148_bridge->driver_priv);
+
+	kfree(tsi148_bridge);
+}
+
+module_pci_driver(tsi148_driver);
+
+MODULE_PARM_DESC(err_chk, "Check for VME errors on reads and writes");
+module_param(err_chk, bool, 0);
+
+MODULE_PARM_DESC(geoid, "Override geographical addressing");
+module_param(geoid, int, 0);
+
+MODULE_DESCRIPTION("VME driver for the Tundra Tempe VME bridge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/vme/bridges/vme_tsi148.h b/drivers/vme/bridges/vme_tsi148.h
new file mode 100644
index 000000000..226fedc6f
--- /dev/null
+++ b/drivers/vme/bridges/vme_tsi148.h
@@ -0,0 +1,1407 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * tsi148.h
+ *
+ * Support for the Tundra TSI148 VME Bridge chip
+ *
+ * Author: Tom Armistead
+ * Updated and maintained by Ajit Prem
+ * Copyright 2004 Motorola Inc.
+ */
+
+#ifndef TSI148_H
+#define TSI148_H
+
+#ifndef	PCI_VENDOR_ID_TUNDRA
+#define	PCI_VENDOR_ID_TUNDRA 0x10e3
+#endif
+
+#ifndef	PCI_DEVICE_ID_TUNDRA_TSI148
+#define	PCI_DEVICE_ID_TUNDRA_TSI148 0x148
+#endif
+
+/*
+ *  Define the number of each that the Tsi148 supports.
+ */
+#define TSI148_MAX_MASTER		8	/* Max Master Windows */
+#define TSI148_MAX_SLAVE		8	/* Max Slave Windows */
+#define TSI148_MAX_DMA			2	/* Max DMA Controllers */
+#define TSI148_MAX_MAILBOX		4	/* Max Mail Box registers */
+#define TSI148_MAX_SEMAPHORE		8	/* Max Semaphores */
+
+/* Structure used to hold driver specific information */
+struct tsi148_driver {
+	void __iomem *base;	/* Base Address of device registers */
+	wait_queue_head_t dma_queue[2];
+	wait_queue_head_t iack_queue;
+	void (*lm_callback[4])(void *);	/* Called in interrupt handler */
+	void *lm_data[4];
+	void *crcsr_kernel;
+	dma_addr_t crcsr_bus;
+	struct vme_master_resource *flush_image;
+	struct mutex vme_rmw;		/* Only one RMW cycle at a time */
+	struct mutex vme_int;		/*
+					 * Only one VME interrupt can be
+					 * generated at a time, provide locking
+					 */
+};
+
+/*
+ * Layout of a DMAC Linked-List Descriptor
+ *
+ * Note: This structure is accessed via the chip and therefore must be
+ *       correctly laid out - It must also be aligned on 64-bit boundaries.
+ */
+struct tsi148_dma_descriptor {
+	__be32 dsau;      /* Source Address */
+	__be32 dsal;
+	__be32 ddau;      /* Destination Address */
+	__be32 ddal;
+	__be32 dsat;      /* Source attributes */
+	__be32 ddat;      /* Destination attributes */
+	__be32 dnlau;     /* Next link address */
+	__be32 dnlal;
+	__be32 dcnt;      /* Byte count */
+	__be32 ddbs;      /* 2eSST Broadcast select */
+};
+
+struct tsi148_dma_entry {
+	/*
+	 * The descriptor needs to be aligned on a 64-bit boundary, we increase
+	 * the chance of this by putting it first in the structure.
+	 */
+	struct tsi148_dma_descriptor descriptor;
+	struct list_head list;
+	dma_addr_t dma_handle;
+};
+
+/*
+ *  TSI148 ASIC register structure overlays and bit field definitions.
+ *
+ *      Note:   Tsi148 Register Group (CRG) consists of the following
+ *              combination of registers:
+ *                      PCFS    - PCI Configuration Space Registers
+ *                      LCSR    - Local Control and Status Registers
+ *                      GCSR    - Global Control and Status Registers
+ *                      CR/CSR  - Subset of Configuration ROM /
+ *                                Control and Status Registers
+ */
+
+
+/*
+ *  Command/Status Registers (CRG + $004)
+ */
+#define TSI148_PCFS_ID			0x0
+#define TSI148_PCFS_CSR			0x4
+#define TSI148_PCFS_CLASS		0x8
+#define TSI148_PCFS_MISC0		0xC
+#define TSI148_PCFS_MBARL		0x10
+#define TSI148_PCFS_MBARU		0x14
+
+#define TSI148_PCFS_SUBID		0x28
+
+#define TSI148_PCFS_CAPP		0x34
+
+#define TSI148_PCFS_MISC1		0x3C
+
+#define TSI148_PCFS_XCAPP		0x40
+#define TSI148_PCFS_XSTAT		0x44
+
+/*
+ * LCSR definitions
+ */
+
+/*
+ *    Outbound Translations
+ */
+#define TSI148_LCSR_OT0_OTSAU		0x100
+#define TSI148_LCSR_OT0_OTSAL		0x104
+#define TSI148_LCSR_OT0_OTEAU		0x108
+#define TSI148_LCSR_OT0_OTEAL		0x10C
+#define TSI148_LCSR_OT0_OTOFU		0x110
+#define TSI148_LCSR_OT0_OTOFL		0x114
+#define TSI148_LCSR_OT0_OTBS		0x118
+#define TSI148_LCSR_OT0_OTAT		0x11C
+
+#define TSI148_LCSR_OT1_OTSAU		0x120
+#define TSI148_LCSR_OT1_OTSAL		0x124
+#define TSI148_LCSR_OT1_OTEAU		0x128
+#define TSI148_LCSR_OT1_OTEAL		0x12C
+#define TSI148_LCSR_OT1_OTOFU		0x130
+#define TSI148_LCSR_OT1_OTOFL		0x134
+#define TSI148_LCSR_OT1_OTBS		0x138
+#define TSI148_LCSR_OT1_OTAT		0x13C
+
+#define TSI148_LCSR_OT2_OTSAU		0x140
+#define TSI148_LCSR_OT2_OTSAL		0x144
+#define TSI148_LCSR_OT2_OTEAU		0x148
+#define TSI148_LCSR_OT2_OTEAL		0x14C
+#define TSI148_LCSR_OT2_OTOFU		0x150
+#define TSI148_LCSR_OT2_OTOFL		0x154
+#define TSI148_LCSR_OT2_OTBS		0x158
+#define TSI148_LCSR_OT2_OTAT		0x15C
+
+#define TSI148_LCSR_OT3_OTSAU		0x160
+#define TSI148_LCSR_OT3_OTSAL		0x164
+#define TSI148_LCSR_OT3_OTEAU		0x168
+#define TSI148_LCSR_OT3_OTEAL		0x16C
+#define TSI148_LCSR_OT3_OTOFU		0x170
+#define TSI148_LCSR_OT3_OTOFL		0x174
+#define TSI148_LCSR_OT3_OTBS		0x178
+#define TSI148_LCSR_OT3_OTAT		0x17C
+
+#define TSI148_LCSR_OT4_OTSAU		0x180
+#define TSI148_LCSR_OT4_OTSAL		0x184
+#define TSI148_LCSR_OT4_OTEAU		0x188
+#define TSI148_LCSR_OT4_OTEAL		0x18C
+#define TSI148_LCSR_OT4_OTOFU		0x190
+#define TSI148_LCSR_OT4_OTOFL		0x194
+#define TSI148_LCSR_OT4_OTBS		0x198
+#define TSI148_LCSR_OT4_OTAT		0x19C
+
+#define TSI148_LCSR_OT5_OTSAU		0x1A0
+#define TSI148_LCSR_OT5_OTSAL		0x1A4
+#define TSI148_LCSR_OT5_OTEAU		0x1A8
+#define TSI148_LCSR_OT5_OTEAL		0x1AC
+#define TSI148_LCSR_OT5_OTOFU		0x1B0
+#define TSI148_LCSR_OT5_OTOFL		0x1B4
+#define TSI148_LCSR_OT5_OTBS		0x1B8
+#define TSI148_LCSR_OT5_OTAT		0x1BC
+
+#define TSI148_LCSR_OT6_OTSAU		0x1C0
+#define TSI148_LCSR_OT6_OTSAL		0x1C4
+#define TSI148_LCSR_OT6_OTEAU		0x1C8
+#define TSI148_LCSR_OT6_OTEAL		0x1CC
+#define TSI148_LCSR_OT6_OTOFU		0x1D0
+#define TSI148_LCSR_OT6_OTOFL		0x1D4
+#define TSI148_LCSR_OT6_OTBS		0x1D8
+#define TSI148_LCSR_OT6_OTAT		0x1DC
+
+#define TSI148_LCSR_OT7_OTSAU		0x1E0
+#define TSI148_LCSR_OT7_OTSAL		0x1E4
+#define TSI148_LCSR_OT7_OTEAU		0x1E8
+#define TSI148_LCSR_OT7_OTEAL		0x1EC
+#define TSI148_LCSR_OT7_OTOFU		0x1F0
+#define TSI148_LCSR_OT7_OTOFL		0x1F4
+#define TSI148_LCSR_OT7_OTBS		0x1F8
+#define TSI148_LCSR_OT7_OTAT		0x1FC
+
+#define TSI148_LCSR_OT0		0x100
+#define TSI148_LCSR_OT1		0x120
+#define TSI148_LCSR_OT2		0x140
+#define TSI148_LCSR_OT3		0x160
+#define TSI148_LCSR_OT4		0x180
+#define TSI148_LCSR_OT5		0x1A0
+#define TSI148_LCSR_OT6		0x1C0
+#define TSI148_LCSR_OT7		0x1E0
+
+static const int TSI148_LCSR_OT[8] = { TSI148_LCSR_OT0, TSI148_LCSR_OT1,
+					 TSI148_LCSR_OT2, TSI148_LCSR_OT3,
+					 TSI148_LCSR_OT4, TSI148_LCSR_OT5,
+					 TSI148_LCSR_OT6, TSI148_LCSR_OT7 };
+
+#define TSI148_LCSR_OFFSET_OTSAU	0x0
+#define TSI148_LCSR_OFFSET_OTSAL	0x4
+#define TSI148_LCSR_OFFSET_OTEAU	0x8
+#define TSI148_LCSR_OFFSET_OTEAL	0xC
+#define TSI148_LCSR_OFFSET_OTOFU	0x10
+#define TSI148_LCSR_OFFSET_OTOFL	0x14
+#define TSI148_LCSR_OFFSET_OTBS		0x18
+#define TSI148_LCSR_OFFSET_OTAT		0x1C
+
+/*
+ * VMEbus interrupt ack
+ * offset  200
+ */
+#define TSI148_LCSR_VIACK1	0x204
+#define TSI148_LCSR_VIACK2	0x208
+#define TSI148_LCSR_VIACK3	0x20C
+#define TSI148_LCSR_VIACK4	0x210
+#define TSI148_LCSR_VIACK5	0x214
+#define TSI148_LCSR_VIACK6	0x218
+#define TSI148_LCSR_VIACK7	0x21C
+
+static const int TSI148_LCSR_VIACK[8] = { 0, TSI148_LCSR_VIACK1,
+				TSI148_LCSR_VIACK2, TSI148_LCSR_VIACK3,
+				TSI148_LCSR_VIACK4, TSI148_LCSR_VIACK5,
+				TSI148_LCSR_VIACK6, TSI148_LCSR_VIACK7 };
+
+/*
+ * RMW
+ * offset    220
+ */
+#define TSI148_LCSR_RMWAU	0x220
+#define TSI148_LCSR_RMWAL	0x224
+#define TSI148_LCSR_RMWEN	0x228
+#define TSI148_LCSR_RMWC	0x22C
+#define TSI148_LCSR_RMWS	0x230
+
+/*
+ * VMEbus control
+ * offset    234
+ */
+#define TSI148_LCSR_VMCTRL	0x234
+#define TSI148_LCSR_VCTRL	0x238
+#define TSI148_LCSR_VSTAT	0x23C
+
+/*
+ * PCI status
+ * offset  240
+ */
+#define TSI148_LCSR_PSTAT	0x240
+
+/*
+ * VME filter.
+ * offset  250
+ */
+#define TSI148_LCSR_VMEFL	0x250
+
+	/*
+	 * VME exception.
+	 * offset  260
+ */
+#define TSI148_LCSR_VEAU	0x260
+#define TSI148_LCSR_VEAL	0x264
+#define TSI148_LCSR_VEAT	0x268
+
+	/*
+	 * PCI error
+	 * offset  270
+	 */
+#define TSI148_LCSR_EDPAU	0x270
+#define TSI148_LCSR_EDPAL	0x274
+#define TSI148_LCSR_EDPXA	0x278
+#define TSI148_LCSR_EDPXS	0x27C
+#define TSI148_LCSR_EDPAT	0x280
+
+	/*
+	 * Inbound Translations
+	 * offset  300
+	 */
+#define TSI148_LCSR_IT0_ITSAU		0x300
+#define TSI148_LCSR_IT0_ITSAL		0x304
+#define TSI148_LCSR_IT0_ITEAU		0x308
+#define TSI148_LCSR_IT0_ITEAL		0x30C
+#define TSI148_LCSR_IT0_ITOFU		0x310
+#define TSI148_LCSR_IT0_ITOFL		0x314
+#define TSI148_LCSR_IT0_ITAT		0x318
+
+#define TSI148_LCSR_IT1_ITSAU		0x320
+#define TSI148_LCSR_IT1_ITSAL		0x324
+#define TSI148_LCSR_IT1_ITEAU		0x328
+#define TSI148_LCSR_IT1_ITEAL		0x32C
+#define TSI148_LCSR_IT1_ITOFU		0x330
+#define TSI148_LCSR_IT1_ITOFL		0x334
+#define TSI148_LCSR_IT1_ITAT		0x338
+
+#define TSI148_LCSR_IT2_ITSAU		0x340
+#define TSI148_LCSR_IT2_ITSAL		0x344
+#define TSI148_LCSR_IT2_ITEAU		0x348
+#define TSI148_LCSR_IT2_ITEAL		0x34C
+#define TSI148_LCSR_IT2_ITOFU		0x350
+#define TSI148_LCSR_IT2_ITOFL		0x354
+#define TSI148_LCSR_IT2_ITAT		0x358
+
+#define TSI148_LCSR_IT3_ITSAU		0x360
+#define TSI148_LCSR_IT3_ITSAL		0x364
+#define TSI148_LCSR_IT3_ITEAU		0x368
+#define TSI148_LCSR_IT3_ITEAL		0x36C
+#define TSI148_LCSR_IT3_ITOFU		0x370
+#define TSI148_LCSR_IT3_ITOFL		0x374
+#define TSI148_LCSR_IT3_ITAT		0x378
+
+#define TSI148_LCSR_IT4_ITSAU		0x380
+#define TSI148_LCSR_IT4_ITSAL		0x384
+#define TSI148_LCSR_IT4_ITEAU		0x388
+#define TSI148_LCSR_IT4_ITEAL		0x38C
+#define TSI148_LCSR_IT4_ITOFU		0x390
+#define TSI148_LCSR_IT4_ITOFL		0x394
+#define TSI148_LCSR_IT4_ITAT		0x398
+
+#define TSI148_LCSR_IT5_ITSAU		0x3A0
+#define TSI148_LCSR_IT5_ITSAL		0x3A4
+#define TSI148_LCSR_IT5_ITEAU		0x3A8
+#define TSI148_LCSR_IT5_ITEAL		0x3AC
+#define TSI148_LCSR_IT5_ITOFU		0x3B0
+#define TSI148_LCSR_IT5_ITOFL		0x3B4
+#define TSI148_LCSR_IT5_ITAT		0x3B8
+
+#define TSI148_LCSR_IT6_ITSAU		0x3C0
+#define TSI148_LCSR_IT6_ITSAL		0x3C4
+#define TSI148_LCSR_IT6_ITEAU		0x3C8
+#define TSI148_LCSR_IT6_ITEAL		0x3CC
+#define TSI148_LCSR_IT6_ITOFU		0x3D0
+#define TSI148_LCSR_IT6_ITOFL		0x3D4
+#define TSI148_LCSR_IT6_ITAT		0x3D8
+
+#define TSI148_LCSR_IT7_ITSAU		0x3E0
+#define TSI148_LCSR_IT7_ITSAL		0x3E4
+#define TSI148_LCSR_IT7_ITEAU		0x3E8
+#define TSI148_LCSR_IT7_ITEAL		0x3EC
+#define TSI148_LCSR_IT7_ITOFU		0x3F0
+#define TSI148_LCSR_IT7_ITOFL		0x3F4
+#define TSI148_LCSR_IT7_ITAT		0x3F8
+
+
+#define TSI148_LCSR_IT0		0x300
+#define TSI148_LCSR_IT1		0x320
+#define TSI148_LCSR_IT2		0x340
+#define TSI148_LCSR_IT3		0x360
+#define TSI148_LCSR_IT4		0x380
+#define TSI148_LCSR_IT5		0x3A0
+#define TSI148_LCSR_IT6		0x3C0
+#define TSI148_LCSR_IT7		0x3E0
+
+static const int TSI148_LCSR_IT[8] = { TSI148_LCSR_IT0, TSI148_LCSR_IT1,
+					 TSI148_LCSR_IT2, TSI148_LCSR_IT3,
+					 TSI148_LCSR_IT4, TSI148_LCSR_IT5,
+					 TSI148_LCSR_IT6, TSI148_LCSR_IT7 };
+
+#define TSI148_LCSR_OFFSET_ITSAU	0x0
+#define TSI148_LCSR_OFFSET_ITSAL	0x4
+#define TSI148_LCSR_OFFSET_ITEAU	0x8
+#define TSI148_LCSR_OFFSET_ITEAL	0xC
+#define TSI148_LCSR_OFFSET_ITOFU	0x10
+#define TSI148_LCSR_OFFSET_ITOFL	0x14
+#define TSI148_LCSR_OFFSET_ITAT		0x18
+
+	/*
+	 * Inbound Translation GCSR
+	 * offset  400
+	 */
+#define TSI148_LCSR_GBAU	0x400
+#define TSI148_LCSR_GBAL	0x404
+#define TSI148_LCSR_GCSRAT	0x408
+
+	/*
+	 * Inbound Translation CRG
+	 * offset  40C
+	 */
+#define TSI148_LCSR_CBAU	0x40C
+#define TSI148_LCSR_CBAL	0x410
+#define TSI148_LCSR_CSRAT	0x414
+
+	/*
+	 * Inbound Translation CR/CSR
+	 *         CRG
+	 * offset  418
+	 */
+#define TSI148_LCSR_CROU	0x418
+#define TSI148_LCSR_CROL	0x41C
+#define TSI148_LCSR_CRAT	0x420
+
+	/*
+	 * Inbound Translation Location Monitor
+	 * offset  424
+	 */
+#define TSI148_LCSR_LMBAU	0x424
+#define TSI148_LCSR_LMBAL	0x428
+#define TSI148_LCSR_LMAT	0x42C
+
+	/*
+	 * VMEbus Interrupt Control.
+	 * offset  430
+	 */
+#define TSI148_LCSR_BCU		0x430
+#define TSI148_LCSR_BCL		0x434
+#define TSI148_LCSR_BPGTR	0x438
+#define TSI148_LCSR_BPCTR	0x43C
+#define TSI148_LCSR_VICR	0x440
+
+	/*
+	 * Local Bus Interrupt Control.
+	 * offset  448
+	 */
+#define TSI148_LCSR_INTEN	0x448
+#define TSI148_LCSR_INTEO	0x44C
+#define TSI148_LCSR_INTS	0x450
+#define TSI148_LCSR_INTC	0x454
+#define TSI148_LCSR_INTM1	0x458
+#define TSI148_LCSR_INTM2	0x45C
+
+	/*
+	 * DMA Controllers
+	 * offset 500
+	 */
+#define TSI148_LCSR_DCTL0	0x500
+#define TSI148_LCSR_DSTA0	0x504
+#define TSI148_LCSR_DCSAU0	0x508
+#define TSI148_LCSR_DCSAL0	0x50C
+#define TSI148_LCSR_DCDAU0	0x510
+#define TSI148_LCSR_DCDAL0	0x514
+#define TSI148_LCSR_DCLAU0	0x518
+#define TSI148_LCSR_DCLAL0	0x51C
+#define TSI148_LCSR_DSAU0	0x520
+#define TSI148_LCSR_DSAL0	0x524
+#define TSI148_LCSR_DDAU0	0x528
+#define TSI148_LCSR_DDAL0	0x52C
+#define TSI148_LCSR_DSAT0	0x530
+#define TSI148_LCSR_DDAT0	0x534
+#define TSI148_LCSR_DNLAU0	0x538
+#define TSI148_LCSR_DNLAL0	0x53C
+#define TSI148_LCSR_DCNT0	0x540
+#define TSI148_LCSR_DDBS0	0x544
+
+#define TSI148_LCSR_DCTL1	0x580
+#define TSI148_LCSR_DSTA1	0x584
+#define TSI148_LCSR_DCSAU1	0x588
+#define TSI148_LCSR_DCSAL1	0x58C
+#define TSI148_LCSR_DCDAU1	0x590
+#define TSI148_LCSR_DCDAL1	0x594
+#define TSI148_LCSR_DCLAU1	0x598
+#define TSI148_LCSR_DCLAL1	0x59C
+#define TSI148_LCSR_DSAU1	0x5A0
+#define TSI148_LCSR_DSAL1	0x5A4
+#define TSI148_LCSR_DDAU1	0x5A8
+#define TSI148_LCSR_DDAL1	0x5AC
+#define TSI148_LCSR_DSAT1	0x5B0
+#define TSI148_LCSR_DDAT1	0x5B4
+#define TSI148_LCSR_DNLAU1	0x5B8
+#define TSI148_LCSR_DNLAL1	0x5BC
+#define TSI148_LCSR_DCNT1	0x5C0
+#define TSI148_LCSR_DDBS1	0x5C4
+
+#define TSI148_LCSR_DMA0	0x500
+#define TSI148_LCSR_DMA1	0x580
+
+
+static const int TSI148_LCSR_DMA[TSI148_MAX_DMA] = { TSI148_LCSR_DMA0,
+						TSI148_LCSR_DMA1 };
+
+#define TSI148_LCSR_OFFSET_DCTL		0x0
+#define TSI148_LCSR_OFFSET_DSTA		0x4
+#define TSI148_LCSR_OFFSET_DCSAU	0x8
+#define TSI148_LCSR_OFFSET_DCSAL	0xC
+#define TSI148_LCSR_OFFSET_DCDAU	0x10
+#define TSI148_LCSR_OFFSET_DCDAL	0x14
+#define TSI148_LCSR_OFFSET_DCLAU	0x18
+#define TSI148_LCSR_OFFSET_DCLAL	0x1C
+#define TSI148_LCSR_OFFSET_DSAU		0x20
+#define TSI148_LCSR_OFFSET_DSAL		0x24
+#define TSI148_LCSR_OFFSET_DDAU		0x28
+#define TSI148_LCSR_OFFSET_DDAL		0x2C
+#define TSI148_LCSR_OFFSET_DSAT		0x30
+#define TSI148_LCSR_OFFSET_DDAT		0x34
+#define TSI148_LCSR_OFFSET_DNLAU	0x38
+#define TSI148_LCSR_OFFSET_DNLAL	0x3C
+#define TSI148_LCSR_OFFSET_DCNT		0x40
+#define TSI148_LCSR_OFFSET_DDBS		0x44
+
+	/*
+	 * GCSR Register Group
+	 */
+
+	/*
+	 *         GCSR    CRG
+	 * offset   00     600 - DEVI/VENI
+	 * offset   04     604 - CTRL/GA/REVID
+	 * offset   08     608 - Semaphore3/2/1/0
+	 * offset   0C     60C - Seamphore7/6/5/4
+	 */
+#define TSI148_GCSR_ID		0x600
+#define TSI148_GCSR_CSR		0x604
+#define TSI148_GCSR_SEMA0	0x608
+#define TSI148_GCSR_SEMA1	0x60C
+
+	/*
+	 * Mail Box
+	 *         GCSR    CRG
+	 * offset   10     610 - Mailbox0
+	 */
+#define TSI148_GCSR_MBOX0	0x610
+#define TSI148_GCSR_MBOX1	0x614
+#define TSI148_GCSR_MBOX2	0x618
+#define TSI148_GCSR_MBOX3	0x61C
+
+static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
+					TSI148_GCSR_MBOX1,
+					TSI148_GCSR_MBOX2,
+					TSI148_GCSR_MBOX3 };
+
+	/*
+	 * CR/CSR
+	 */
+
+	/*
+	 *        CR/CSR   CRG
+	 * offset  7FFF4   FF4 - CSRBCR
+	 * offset  7FFF8   FF8 - CSRBSR
+	 * offset  7FFFC   FFC - CBAR
+	 */
+#define TSI148_CSRBCR	0xFF4
+#define TSI148_CSRBSR	0xFF8
+#define TSI148_CBAR	0xFFC
+
+
+
+
+	/*
+	 *  TSI148 Register Bit Definitions
+	 */
+
+	/*
+	 *  PFCS Register Set
+	 */
+#define TSI148_PCFS_CMMD_SERR          (1<<8)	/* SERR_L out pin ssys err */
+#define TSI148_PCFS_CMMD_PERR          (1<<6)	/* PERR_L out pin  parity */
+#define TSI148_PCFS_CMMD_MSTR          (1<<2)	/* PCI bus master */
+#define TSI148_PCFS_CMMD_MEMSP         (1<<1)	/* PCI mem space access  */
+#define TSI148_PCFS_CMMD_IOSP          (1<<0)	/* PCI I/O space enable */
+
+#define TSI148_PCFS_STAT_RCPVE         (1<<15)	/* Detected Parity Error */
+#define TSI148_PCFS_STAT_SIGSE         (1<<14)	/* Signalled System Error */
+#define TSI148_PCFS_STAT_RCVMA         (1<<13)	/* Received Master Abort */
+#define TSI148_PCFS_STAT_RCVTA         (1<<12)	/* Received Target Abort */
+#define TSI148_PCFS_STAT_SIGTA         (1<<11)	/* Signalled Target Abort */
+#define TSI148_PCFS_STAT_SELTIM        (3<<9)	/* DELSEL Timing */
+#define TSI148_PCFS_STAT_DPAR          (1<<8)	/* Data Parity Err Reported */
+#define TSI148_PCFS_STAT_FAST          (1<<7)	/* Fast back-to-back Cap */
+#define TSI148_PCFS_STAT_P66M          (1<<5)	/* 66 MHz Capable */
+#define TSI148_PCFS_STAT_CAPL          (1<<4)	/* Capab List - address $34 */
+
+/*
+ *  Revision ID/Class Code Registers   (CRG +$008)
+ */
+#define TSI148_PCFS_CLAS_M             (0xFF<<24)	/* Class ID */
+#define TSI148_PCFS_SUBCLAS_M          (0xFF<<16)	/* Sub-Class ID */
+#define TSI148_PCFS_PROGIF_M           (0xFF<<8)	/* Sub-Class ID */
+#define TSI148_PCFS_REVID_M            (0xFF<<0)	/* Rev ID */
+
+/*
+ * Cache Line Size/ Master Latency Timer/ Header Type Registers (CRG + $00C)
+ */
+#define TSI148_PCFS_HEAD_M             (0xFF<<16)	/* Master Lat Timer */
+#define TSI148_PCFS_MLAT_M             (0xFF<<8)	/* Master Lat Timer */
+#define TSI148_PCFS_CLSZ_M             (0xFF<<0)	/* Cache Line Size */
+
+/*
+ *  Memory Base Address Lower Reg (CRG + $010)
+ */
+#define TSI148_PCFS_MBARL_BASEL_M      (0xFFFFF<<12) /* Base Addr Lower Mask */
+#define TSI148_PCFS_MBARL_PRE          (1<<3)	/* Prefetch */
+#define TSI148_PCFS_MBARL_MTYPE_M      (3<<1)	/* Memory Type Mask */
+#define TSI148_PCFS_MBARL_IOMEM        (1<<0)	/* I/O Space Indicator */
+
+/*
+ *  Message Signaled Interrupt Capabilities Register (CRG + $040)
+ */
+#define TSI148_PCFS_MSICAP_64BAC       (1<<7)	/* 64-bit Address Capable */
+#define TSI148_PCFS_MSICAP_MME_M       (7<<4)	/* Multiple Msg Enable Mask */
+#define TSI148_PCFS_MSICAP_MMC_M       (7<<1)	/* Multiple Msg Capable Mask */
+#define TSI148_PCFS_MSICAP_MSIEN       (1<<0)	/* Msg signaled INT Enable */
+
+/*
+ *  Message Address Lower Register (CRG +$044)
+ */
+#define TSI148_PCFS_MSIAL_M            (0x3FFFFFFF<<2)	/* Mask */
+
+/*
+ *  Message Data Register (CRG + 4C)
+ */
+#define TSI148_PCFS_MSIMD_M            (0xFFFF<<0)	/* Mask */
+
+/*
+ *  PCI-X Capabilities Register (CRG + $050)
+ */
+#define TSI148_PCFS_PCIXCAP_MOST_M     (7<<4)	/* Max outstanding Split Tran */
+#define TSI148_PCFS_PCIXCAP_MMRBC_M    (3<<2)	/* Max Mem Read byte cnt */
+#define TSI148_PCFS_PCIXCAP_ERO        (1<<1)	/* Enable Relaxed Ordering */
+#define TSI148_PCFS_PCIXCAP_DPERE      (1<<0)	/* Data Parity Recover Enable */
+
+/*
+ *  PCI-X Status Register (CRG +$054)
+ */
+#define TSI148_PCFS_PCIXSTAT_RSCEM     (1<<29)	/* Received Split Comp Error */
+#define TSI148_PCFS_PCIXSTAT_DMCRS_M   (7<<26)	/* max Cumulative Read Size */
+#define TSI148_PCFS_PCIXSTAT_DMOST_M   (7<<23)	/* max outstanding Split Trans
+						 */
+#define TSI148_PCFS_PCIXSTAT_DMMRC_M   (3<<21)	/* max mem read byte count */
+#define TSI148_PCFS_PCIXSTAT_DC        (1<<20)	/* Device Complexity */
+#define TSI148_PCFS_PCIXSTAT_USC       (1<<19)	/* Unexpected Split comp */
+#define TSI148_PCFS_PCIXSTAT_SCD       (1<<18)	/* Split completion discard */
+#define TSI148_PCFS_PCIXSTAT_133C      (1<<17)	/* 133MHz capable */
+#define TSI148_PCFS_PCIXSTAT_64D       (1<<16)	/* 64 bit device */
+#define TSI148_PCFS_PCIXSTAT_BN_M      (0xFF<<8)	/* Bus number */
+#define TSI148_PCFS_PCIXSTAT_DN_M      (0x1F<<3)	/* Device number */
+#define TSI148_PCFS_PCIXSTAT_FN_M      (7<<0)	/* Function Number */
+
+/*
+ *  LCSR Registers
+ */
+
+/*
+ *  Outbound Translation Starting Address Lower
+ */
+#define TSI148_LCSR_OTSAL_M            (0xFFFF<<16)	/* Mask */
+
+/*
+ *  Outbound Translation Ending Address Lower
+ */
+#define TSI148_LCSR_OTEAL_M            (0xFFFF<<16)	/* Mask */
+
+/*
+ *  Outbound Translation Offset Lower
+ */
+#define TSI148_LCSR_OTOFFL_M           (0xFFFF<<16)	/* Mask */
+
+/*
+ *  Outbound Translation 2eSST Broadcast Select
+ */
+#define TSI148_LCSR_OTBS_M             (0xFFFFF<<0)	/* Mask */
+
+/*
+ *  Outbound Translation Attribute
+ */
+#define TSI148_LCSR_OTAT_EN            (1<<31)	/* Window Enable */
+#define TSI148_LCSR_OTAT_MRPFD         (1<<18)	/* Prefetch Disable */
+
+#define TSI148_LCSR_OTAT_PFS_M         (3<<16)	/* Prefetch Size Mask */
+#define TSI148_LCSR_OTAT_PFS_2         (0<<16)	/* 2 Cache Lines P Size */
+#define TSI148_LCSR_OTAT_PFS_4         (1<<16)	/* 4 Cache Lines P Size */
+#define TSI148_LCSR_OTAT_PFS_8         (2<<16)	/* 8 Cache Lines P Size */
+#define TSI148_LCSR_OTAT_PFS_16        (3<<16)	/* 16 Cache Lines P Size */
+
+#define TSI148_LCSR_OTAT_2eSSTM_M      (7<<11)	/* 2eSST Xfer Rate Mask */
+#define TSI148_LCSR_OTAT_2eSSTM_160    (0<<11)	/* 160MB/s 2eSST Xfer Rate */
+#define TSI148_LCSR_OTAT_2eSSTM_267    (1<<11)	/* 267MB/s 2eSST Xfer Rate */
+#define TSI148_LCSR_OTAT_2eSSTM_320    (2<<11)	/* 320MB/s 2eSST Xfer Rate */
+
+#define TSI148_LCSR_OTAT_TM_M          (7<<8)	/* Xfer Protocol Mask */
+#define TSI148_LCSR_OTAT_TM_SCT        (0<<8)	/* SCT Xfer Protocol */
+#define TSI148_LCSR_OTAT_TM_BLT        (1<<8)	/* BLT Xfer Protocol */
+#define TSI148_LCSR_OTAT_TM_MBLT       (2<<8)	/* MBLT Xfer Protocol */
+#define TSI148_LCSR_OTAT_TM_2eVME      (3<<8)	/* 2eVME Xfer Protocol */
+#define TSI148_LCSR_OTAT_TM_2eSST      (4<<8)	/* 2eSST Xfer Protocol */
+#define TSI148_LCSR_OTAT_TM_2eSSTB     (5<<8)	/* 2eSST Bcast Xfer Protocol */
+
+#define TSI148_LCSR_OTAT_DBW_M         (3<<6)	/* Max Data Width */
+#define TSI148_LCSR_OTAT_DBW_16        (0<<6)	/* 16-bit Data Width */
+#define TSI148_LCSR_OTAT_DBW_32        (1<<6)	/* 32-bit Data Width */
+
+#define TSI148_LCSR_OTAT_SUP           (1<<5)	/* Supervisory Access */
+#define TSI148_LCSR_OTAT_PGM           (1<<4)	/* Program Access */
+
+#define TSI148_LCSR_OTAT_AMODE_M       (0xf<<0)	/* Address Mode Mask */
+#define TSI148_LCSR_OTAT_AMODE_A16     (0<<0)	/* A16 Address Space */
+#define TSI148_LCSR_OTAT_AMODE_A24     (1<<0)	/* A24 Address Space */
+#define TSI148_LCSR_OTAT_AMODE_A32     (2<<0)	/* A32 Address Space */
+#define TSI148_LCSR_OTAT_AMODE_A64     (4<<0)	/* A32 Address Space */
+#define TSI148_LCSR_OTAT_AMODE_CRCSR   (5<<0)	/* CR/CSR Address Space */
+#define TSI148_LCSR_OTAT_AMODE_USER1   (8<<0)	/* User1 Address Space */
+#define TSI148_LCSR_OTAT_AMODE_USER2   (9<<0)	/* User2 Address Space */
+#define TSI148_LCSR_OTAT_AMODE_USER3   (10<<0)	/* User3 Address Space */
+#define TSI148_LCSR_OTAT_AMODE_USER4   (11<<0)	/* User4 Address Space */
+
+/*
+ *  VME Master Control Register  CRG+$234
+ */
+#define TSI148_LCSR_VMCTRL_VSA         (1<<27)	/* VMEbus Stop Ack */
+#define TSI148_LCSR_VMCTRL_VS          (1<<26)	/* VMEbus Stop */
+#define TSI148_LCSR_VMCTRL_DHB         (1<<25)	/* Device Has Bus */
+#define TSI148_LCSR_VMCTRL_DWB         (1<<24)	/* Device Wants Bus */
+
+#define TSI148_LCSR_VMCTRL_RMWEN       (1<<20)	/* RMW Enable */
+
+#define TSI148_LCSR_VMCTRL_ATO_M       (7<<16)	/* Master Access Time-out Mask
+						 */
+#define TSI148_LCSR_VMCTRL_ATO_32      (0<<16)	/* 32 us */
+#define TSI148_LCSR_VMCTRL_ATO_128     (1<<16)	/* 128 us */
+#define TSI148_LCSR_VMCTRL_ATO_512     (2<<16)	/* 512 us */
+#define TSI148_LCSR_VMCTRL_ATO_2M      (3<<16)	/* 2 ms */
+#define TSI148_LCSR_VMCTRL_ATO_8M      (4<<16)	/* 8 ms */
+#define TSI148_LCSR_VMCTRL_ATO_32M     (5<<16)	/* 32 ms */
+#define TSI148_LCSR_VMCTRL_ATO_128M    (6<<16)	/* 128 ms */
+#define TSI148_LCSR_VMCTRL_ATO_DIS     (7<<16)	/* Disabled */
+
+#define TSI148_LCSR_VMCTRL_VTOFF_M     (7<<12)	/* VMEbus Master Time off */
+#define TSI148_LCSR_VMCTRL_VTOFF_0     (0<<12)	/* 0us */
+#define TSI148_LCSR_VMCTRL_VTOFF_1     (1<<12)	/* 1us */
+#define TSI148_LCSR_VMCTRL_VTOFF_2     (2<<12)	/* 2us */
+#define TSI148_LCSR_VMCTRL_VTOFF_4     (3<<12)	/* 4us */
+#define TSI148_LCSR_VMCTRL_VTOFF_8     (4<<12)	/* 8us */
+#define TSI148_LCSR_VMCTRL_VTOFF_16    (5<<12)	/* 16us */
+#define TSI148_LCSR_VMCTRL_VTOFF_32    (6<<12)	/* 32us */
+#define TSI148_LCSR_VMCTRL_VTOFF_64    (7<<12)	/* 64us */
+
+#define TSI148_LCSR_VMCTRL_VTON_M      (7<<8)	/* VMEbus Master Time On */
+#define TSI148_LCSR_VMCTRL_VTON_4      (0<<8)	/* 8us */
+#define TSI148_LCSR_VMCTRL_VTON_8      (1<<8)	/* 8us */
+#define TSI148_LCSR_VMCTRL_VTON_16     (2<<8)	/* 16us */
+#define TSI148_LCSR_VMCTRL_VTON_32     (3<<8)	/* 32us */
+#define TSI148_LCSR_VMCTRL_VTON_64     (4<<8)	/* 64us */
+#define TSI148_LCSR_VMCTRL_VTON_128    (5<<8)	/* 128us */
+#define TSI148_LCSR_VMCTRL_VTON_256    (6<<8)	/* 256us */
+#define TSI148_LCSR_VMCTRL_VTON_512    (7<<8)	/* 512us */
+
+#define TSI148_LCSR_VMCTRL_VREL_M      (3<<3)	/* VMEbus Master Rel Mode Mask
+						 */
+#define TSI148_LCSR_VMCTRL_VREL_T_D    (0<<3)	/* Time on or Done */
+#define TSI148_LCSR_VMCTRL_VREL_T_R_D  (1<<3)	/* Time on and REQ or Done */
+#define TSI148_LCSR_VMCTRL_VREL_T_B_D  (2<<3)	/* Time on and BCLR or Done */
+#define TSI148_LCSR_VMCTRL_VREL_T_D_R  (3<<3)	/* Time on or Done and REQ */
+
+#define TSI148_LCSR_VMCTRL_VFAIR       (1<<2)	/* VMEbus Master Fair Mode */
+#define TSI148_LCSR_VMCTRL_VREQL_M     (3<<0)	/* VMEbus Master Req Level Mask
+						 */
+
+/*
+ *  VMEbus Control Register CRG+$238
+ */
+#define TSI148_LCSR_VCTRL_LRE          (1<<31)	/* Late Retry Enable */
+
+#define TSI148_LCSR_VCTRL_DLT_M        (0xF<<24)	/* Deadlock Timer */
+#define TSI148_LCSR_VCTRL_DLT_OFF      (0<<24)	/* Deadlock Timer Off */
+#define TSI148_LCSR_VCTRL_DLT_16       (1<<24)	/* 16 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_32       (2<<24)	/* 32 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_64       (3<<24)	/* 64 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_128      (4<<24)	/* 128 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_256      (5<<24)	/* 256 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_512      (6<<24)	/* 512 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_1024     (7<<24)	/* 1024 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_2048     (8<<24)	/* 2048 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_4096     (9<<24)	/* 4096 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_8192     (0xA<<24)	/* 8192 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_16384    (0xB<<24)	/* 16384 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_32768    (0xC<<24)	/* 32768 VCLKS */
+
+#define TSI148_LCSR_VCTRL_NERBB        (1<<20)	/* No Early Release of Bus Busy
+						 */
+
+#define TSI148_LCSR_VCTRL_SRESET       (1<<17)	/* System Reset */
+#define TSI148_LCSR_VCTRL_LRESET       (1<<16)	/* Local Reset */
+
+#define TSI148_LCSR_VCTRL_SFAILAI      (1<<15)	/* SYSFAIL Auto Slot ID */
+#define TSI148_LCSR_VCTRL_BID_M        (0x1F<<8)	/* Broadcast ID Mask */
+
+#define TSI148_LCSR_VCTRL_ATOEN        (1<<7)	/* Arbiter Time-out Enable */
+#define TSI148_LCSR_VCTRL_ROBIN        (1<<6)	/* VMEbus Round Robin */
+
+#define TSI148_LCSR_VCTRL_GTO_M        (7<<0)	/* VMEbus Global Time-out Mask
+						 */
+#define TSI148_LCSR_VCTRL_GTO_8	      (0<<0)	/* 8 us */
+#define TSI148_LCSR_VCTRL_GTO_16	      (1<<0)	/* 16 us */
+#define TSI148_LCSR_VCTRL_GTO_32	      (2<<0)	/* 32 us */
+#define TSI148_LCSR_VCTRL_GTO_64	      (3<<0)	/* 64 us */
+#define TSI148_LCSR_VCTRL_GTO_128      (4<<0)	/* 128 us */
+#define TSI148_LCSR_VCTRL_GTO_256      (5<<0)	/* 256 us */
+#define TSI148_LCSR_VCTRL_GTO_512      (6<<0)	/* 512 us */
+#define TSI148_LCSR_VCTRL_GTO_DIS      (7<<0)	/* Disabled */
+
+/*
+ *  VMEbus Status Register  CRG + $23C
+ */
+#define TSI148_LCSR_VSTAT_CPURST       (1<<15)	/* Clear power up reset */
+#define TSI148_LCSR_VSTAT_BRDFL        (1<<14)	/* Board fail */
+#define TSI148_LCSR_VSTAT_PURSTS       (1<<12)	/* Power up reset status */
+#define TSI148_LCSR_VSTAT_BDFAILS      (1<<11)	/* Board Fail Status */
+#define TSI148_LCSR_VSTAT_SYSFAILS     (1<<10)	/* System Fail Status */
+#define TSI148_LCSR_VSTAT_ACFAILS      (1<<9)	/* AC fail status */
+#define TSI148_LCSR_VSTAT_SCONS        (1<<8)	/* System Cont Status */
+#define TSI148_LCSR_VSTAT_GAP          (1<<5)	/* Geographic Addr Parity */
+#define TSI148_LCSR_VSTAT_GA_M         (0x1F<<0)  /* Geographic Addr Mask */
+
+/*
+ *  PCI Configuration Status Register CRG+$240
+ */
+#define TSI148_LCSR_PSTAT_REQ64S       (1<<6)	/* Request 64 status set */
+#define TSI148_LCSR_PSTAT_M66ENS       (1<<5)	/* M66ENS 66Mhz enable */
+#define TSI148_LCSR_PSTAT_FRAMES       (1<<4)	/* Frame Status */
+#define TSI148_LCSR_PSTAT_IRDYS        (1<<3)	/* IRDY status */
+#define TSI148_LCSR_PSTAT_DEVSELS      (1<<2)	/* DEVL status */
+#define TSI148_LCSR_PSTAT_STOPS        (1<<1)	/* STOP status */
+#define TSI148_LCSR_PSTAT_TRDYS        (1<<0)	/* TRDY status */
+
+/*
+ *  VMEbus Exception Attributes Register  CRG + $268
+ */
+#define TSI148_LCSR_VEAT_VES           (1<<31)	/* Status */
+#define TSI148_LCSR_VEAT_VEOF          (1<<30)	/* Overflow */
+#define TSI148_LCSR_VEAT_VESCL         (1<<29)	/* Status Clear */
+#define TSI148_LCSR_VEAT_2EOT          (1<<21)	/* 2e Odd Termination */
+#define TSI148_LCSR_VEAT_2EST          (1<<20)	/* 2e Slave terminated */
+#define TSI148_LCSR_VEAT_BERR          (1<<19)	/* Bus Error */
+#define TSI148_LCSR_VEAT_LWORD         (1<<18)	/* LWORD_ signal state */
+#define TSI148_LCSR_VEAT_WRITE         (1<<17)	/* WRITE_ signal state */
+#define TSI148_LCSR_VEAT_IACK          (1<<16)	/* IACK_ signal state */
+#define TSI148_LCSR_VEAT_DS1           (1<<15)	/* DS1_ signal state */
+#define TSI148_LCSR_VEAT_DS0           (1<<14)	/* DS0_ signal state */
+#define TSI148_LCSR_VEAT_AM_M          (0x3F<<8)	/* Address Mode Mask */
+#define TSI148_LCSR_VEAT_XAM_M         (0xFF<<0)	/* Master AMode Mask */
+
+
+/*
+ * VMEbus PCI Error Diagnostics PCI/X Attributes Register  CRG + $280
+ */
+#define TSI148_LCSR_EDPAT_EDPCL        (1<<29)
+
+/*
+ *  Inbound Translation Starting Address Lower
+ */
+#define TSI148_LCSR_ITSAL6432_M        (0xFFFF<<16)	/* Mask */
+#define TSI148_LCSR_ITSAL24_M          (0x00FFF<<12)	/* Mask */
+#define TSI148_LCSR_ITSAL16_M          (0x0000FFF<<4)	/* Mask */
+
+/*
+ *  Inbound Translation Ending Address Lower
+ */
+#define TSI148_LCSR_ITEAL6432_M        (0xFFFF<<16)	/* Mask */
+#define TSI148_LCSR_ITEAL24_M          (0x00FFF<<12)	/* Mask */
+#define TSI148_LCSR_ITEAL16_M          (0x0000FFF<<4)	/* Mask */
+
+/*
+ *  Inbound Translation Offset Lower
+ */
+#define TSI148_LCSR_ITOFFL6432_M       (0xFFFF<<16)	/* Mask */
+#define TSI148_LCSR_ITOFFL24_M         (0xFFFFF<<12)	/* Mask */
+#define TSI148_LCSR_ITOFFL16_M         (0xFFFFFFF<<4)	/* Mask */
+
+/*
+ *  Inbound Translation Attribute
+ */
+#define TSI148_LCSR_ITAT_EN            (1<<31)	/* Window Enable */
+#define TSI148_LCSR_ITAT_TH            (1<<18)	/* Prefetch Threshold */
+
+#define TSI148_LCSR_ITAT_VFS_M         (3<<16)	/* Virtual FIFO Size Mask */
+#define TSI148_LCSR_ITAT_VFS_64        (0<<16)	/* 64 bytes Virtual FIFO Size */
+#define TSI148_LCSR_ITAT_VFS_128       (1<<16)	/* 128 bytes Virtual FIFO Sz */
+#define TSI148_LCSR_ITAT_VFS_256       (2<<16)	/* 256 bytes Virtual FIFO Sz */
+#define TSI148_LCSR_ITAT_VFS_512       (3<<16)	/* 512 bytes Virtual FIFO Sz */
+
+#define TSI148_LCSR_ITAT_2eSSTM_M      (7<<12)	/* 2eSST Xfer Rate Mask */
+#define TSI148_LCSR_ITAT_2eSSTM_160    (0<<12)	/* 160MB/s 2eSST Xfer Rate */
+#define TSI148_LCSR_ITAT_2eSSTM_267    (1<<12)	/* 267MB/s 2eSST Xfer Rate */
+#define TSI148_LCSR_ITAT_2eSSTM_320    (2<<12)	/* 320MB/s 2eSST Xfer Rate */
+
+#define TSI148_LCSR_ITAT_2eSSTB        (1<<11)	/* 2eSST Bcast Xfer Protocol */
+#define TSI148_LCSR_ITAT_2eSST         (1<<10)	/* 2eSST Xfer Protocol */
+#define TSI148_LCSR_ITAT_2eVME         (1<<9)	/* 2eVME Xfer Protocol */
+#define TSI148_LCSR_ITAT_MBLT          (1<<8)	/* MBLT Xfer Protocol */
+#define TSI148_LCSR_ITAT_BLT           (1<<7)	/* BLT Xfer Protocol */
+
+#define TSI148_LCSR_ITAT_AS_M          (7<<4)	/* Address Space Mask */
+#define TSI148_LCSR_ITAT_AS_A16        (0<<4)	/* A16 Address Space */
+#define TSI148_LCSR_ITAT_AS_A24        (1<<4)	/* A24 Address Space */
+#define TSI148_LCSR_ITAT_AS_A32        (2<<4)	/* A32 Address Space */
+#define TSI148_LCSR_ITAT_AS_A64        (4<<4)	/* A64 Address Space */
+
+#define TSI148_LCSR_ITAT_SUPR          (1<<3)	/* Supervisor Access */
+#define TSI148_LCSR_ITAT_NPRIV         (1<<2)	/* Non-Priv (User) Access */
+#define TSI148_LCSR_ITAT_PGM           (1<<1)	/* Program Access */
+#define TSI148_LCSR_ITAT_DATA          (1<<0)	/* Data Access */
+
+/*
+ *  GCSR Base Address Lower Address  CRG +$404
+ */
+#define TSI148_LCSR_GBAL_M             (0x7FFFFFF<<5)	/* Mask */
+
+/*
+ *  GCSR Attribute Register CRG + $408
+ */
+#define TSI148_LCSR_GCSRAT_EN          (1<<7)	/* Enable access to GCSR */
+
+#define TSI148_LCSR_GCSRAT_AS_M        (7<<4)	/* Address Space Mask */
+#define TSI148_LCSR_GCSRAT_AS_A16       (0<<4)	/* Address Space 16 */
+#define TSI148_LCSR_GCSRAT_AS_A24       (1<<4)	/* Address Space 24 */
+#define TSI148_LCSR_GCSRAT_AS_A32       (2<<4)	/* Address Space 32 */
+#define TSI148_LCSR_GCSRAT_AS_A64       (4<<4)	/* Address Space 64 */
+
+#define TSI148_LCSR_GCSRAT_SUPR        (1<<3)	/* Sup set -GCSR decoder */
+#define TSI148_LCSR_GCSRAT_NPRIV       (1<<2)	/* Non-Privliged set - CGSR */
+#define TSI148_LCSR_GCSRAT_PGM         (1<<1)	/* Program set - GCSR decoder */
+#define TSI148_LCSR_GCSRAT_DATA        (1<<0)	/* DATA set GCSR decoder */
+
+/*
+ *  CRG Base Address Lower Address  CRG + $410
+ */
+#define TSI148_LCSR_CBAL_M             (0xFFFFF<<12)
+
+/*
+ *  CRG Attribute Register  CRG + $414
+ */
+#define TSI148_LCSR_CRGAT_EN           (1<<7)	/* Enable PRG Access */
+
+#define TSI148_LCSR_CRGAT_AS_M         (7<<4)	/* Address Space */
+#define TSI148_LCSR_CRGAT_AS_A16       (0<<4)	/* Address Space 16 */
+#define TSI148_LCSR_CRGAT_AS_A24       (1<<4)	/* Address Space 24 */
+#define TSI148_LCSR_CRGAT_AS_A32       (2<<4)	/* Address Space 32 */
+#define TSI148_LCSR_CRGAT_AS_A64       (4<<4)	/* Address Space 64 */
+
+#define TSI148_LCSR_CRGAT_SUPR         (1<<3)	/* Supervisor Access */
+#define TSI148_LCSR_CRGAT_NPRIV        (1<<2)	/* Non-Privliged(User) Access */
+#define TSI148_LCSR_CRGAT_PGM          (1<<1)	/* Program Access */
+#define TSI148_LCSR_CRGAT_DATA         (1<<0)	/* Data Access */
+
+/*
+ *  CR/CSR Offset Lower Register  CRG + $41C
+ */
+#define TSI148_LCSR_CROL_M             (0x1FFF<<19)	/* Mask */
+
+/*
+ *  CR/CSR Attribute register  CRG + $420
+ */
+#define TSI148_LCSR_CRAT_EN            (1<<7)	/* Enable access to CR/CSR */
+
+/*
+ *  Location Monitor base address lower register  CRG + $428
+ */
+#define TSI148_LCSR_LMBAL_M            (0x7FFFFFF<<5)	/* Mask */
+
+/*
+ *  Location Monitor Attribute Register  CRG + $42C
+ */
+#define TSI148_LCSR_LMAT_EN            (1<<7)	/* Enable Location Monitor */
+
+#define TSI148_LCSR_LMAT_AS_M          (7<<4)	/* Address Space MASK  */
+#define TSI148_LCSR_LMAT_AS_A16        (0<<4)	/* A16 */
+#define TSI148_LCSR_LMAT_AS_A24        (1<<4)	/* A24 */
+#define TSI148_LCSR_LMAT_AS_A32        (2<<4)	/* A32 */
+#define TSI148_LCSR_LMAT_AS_A64        (4<<4)	/* A64 */
+
+#define TSI148_LCSR_LMAT_SUPR          (1<<3)	/* Supervisor Access */
+#define TSI148_LCSR_LMAT_NPRIV         (1<<2)	/* Non-Priv (User) Access */
+#define TSI148_LCSR_LMAT_PGM           (1<<1)	/* Program Access */
+#define TSI148_LCSR_LMAT_DATA          (1<<0)	/* Data Access  */
+
+/*
+ *  Broadcast Pulse Generator Timer Register  CRG + $438
+ */
+#define TSI148_LCSR_BPGTR_BPGT_M       (0xFFFF<<0)	/* Mask */
+
+/*
+ *  Broadcast Programmable Clock Timer Register  CRG + $43C
+ */
+#define TSI148_LCSR_BPCTR_BPCT_M       (0xFFFFFF<<0)	/* Mask */
+
+/*
+ *  VMEbus Interrupt Control Register           CRG + $43C
+ */
+#define TSI148_LCSR_VICR_CNTS_M        (3<<22)	/* Cntr Source MASK */
+#define TSI148_LCSR_VICR_CNTS_DIS      (1<<22)	/* Cntr Disable */
+#define TSI148_LCSR_VICR_CNTS_IRQ1     (2<<22)	/* IRQ1 to Cntr */
+#define TSI148_LCSR_VICR_CNTS_IRQ2     (3<<22)	/* IRQ2 to Cntr */
+
+#define TSI148_LCSR_VICR_EDGIS_M       (3<<20)	/* Edge interrupt MASK */
+#define TSI148_LCSR_VICR_EDGIS_DIS     (1<<20)	/* Edge interrupt Disable */
+#define TSI148_LCSR_VICR_EDGIS_IRQ1    (2<<20)	/* IRQ1 to Edge */
+#define TSI148_LCSR_VICR_EDGIS_IRQ2    (3<<20)	/* IRQ2 to Edge */
+
+#define TSI148_LCSR_VICR_IRQIF_M       (3<<18)	/* IRQ1* Function MASK */
+#define TSI148_LCSR_VICR_IRQIF_NORM    (1<<18)	/* Normal */
+#define TSI148_LCSR_VICR_IRQIF_PULSE   (2<<18)	/* Pulse Generator */
+#define TSI148_LCSR_VICR_IRQIF_PROG    (3<<18)	/* Programmable Clock */
+#define TSI148_LCSR_VICR_IRQIF_1U      (4<<18)	/* 1us Clock */
+
+#define TSI148_LCSR_VICR_IRQ2F_M       (3<<16)	/* IRQ2* Function MASK */
+#define TSI148_LCSR_VICR_IRQ2F_NORM    (1<<16)	/* Normal */
+#define TSI148_LCSR_VICR_IRQ2F_PULSE   (2<<16)	/* Pulse Generator */
+#define TSI148_LCSR_VICR_IRQ2F_PROG    (3<<16)	/* Programmable Clock */
+#define TSI148_LCSR_VICR_IRQ2F_1U      (4<<16)	/* 1us Clock */
+
+#define TSI148_LCSR_VICR_BIP           (1<<15)	/* Broadcast Interrupt Pulse */
+
+#define TSI148_LCSR_VICR_IRQC          (1<<12)	/* VMEbus IRQ Clear */
+#define TSI148_LCSR_VICR_IRQS          (1<<11)	/* VMEbus IRQ Status */
+
+#define TSI148_LCSR_VICR_IRQL_M        (7<<8)	/* VMEbus SW IRQ Level Mask */
+#define TSI148_LCSR_VICR_IRQL_1        (1<<8)	/* VMEbus SW IRQ Level 1 */
+#define TSI148_LCSR_VICR_IRQL_2        (2<<8)	/* VMEbus SW IRQ Level 2 */
+#define TSI148_LCSR_VICR_IRQL_3        (3<<8)	/* VMEbus SW IRQ Level 3 */
+#define TSI148_LCSR_VICR_IRQL_4        (4<<8)	/* VMEbus SW IRQ Level 4 */
+#define TSI148_LCSR_VICR_IRQL_5        (5<<8)	/* VMEbus SW IRQ Level 5 */
+#define TSI148_LCSR_VICR_IRQL_6        (6<<8)	/* VMEbus SW IRQ Level 6 */
+#define TSI148_LCSR_VICR_IRQL_7        (7<<8)	/* VMEbus SW IRQ Level 7 */
+
+static const int TSI148_LCSR_VICR_IRQL[8] = { 0, TSI148_LCSR_VICR_IRQL_1,
+			TSI148_LCSR_VICR_IRQL_2, TSI148_LCSR_VICR_IRQL_3,
+			TSI148_LCSR_VICR_IRQL_4, TSI148_LCSR_VICR_IRQL_5,
+			TSI148_LCSR_VICR_IRQL_6, TSI148_LCSR_VICR_IRQL_7 };
+
+#define TSI148_LCSR_VICR_STID_M        (0xFF<<0)	/* Status/ID Mask */
+
+/*
+ *  Interrupt Enable Register   CRG + $440
+ */
+#define TSI148_LCSR_INTEN_DMA1EN       (1<<25)	/* DMAC 1 */
+#define TSI148_LCSR_INTEN_DMA0EN       (1<<24)	/* DMAC 0 */
+#define TSI148_LCSR_INTEN_LM3EN        (1<<23)	/* Location Monitor 3 */
+#define TSI148_LCSR_INTEN_LM2EN        (1<<22)	/* Location Monitor 2 */
+#define TSI148_LCSR_INTEN_LM1EN        (1<<21)	/* Location Monitor 1 */
+#define TSI148_LCSR_INTEN_LM0EN        (1<<20)	/* Location Monitor 0 */
+#define TSI148_LCSR_INTEN_MB3EN        (1<<19)	/* Mail Box 3 */
+#define TSI148_LCSR_INTEN_MB2EN        (1<<18)	/* Mail Box 2 */
+#define TSI148_LCSR_INTEN_MB1EN        (1<<17)	/* Mail Box 1 */
+#define TSI148_LCSR_INTEN_MB0EN        (1<<16)	/* Mail Box 0 */
+#define TSI148_LCSR_INTEN_PERREN       (1<<13)	/* PCI/X Error */
+#define TSI148_LCSR_INTEN_VERREN       (1<<12)	/* VMEbus Error */
+#define TSI148_LCSR_INTEN_VIEEN        (1<<11)	/* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTEN_IACKEN       (1<<10)	/* IACK */
+#define TSI148_LCSR_INTEN_SYSFLEN      (1<<9)	/* System Fail */
+#define TSI148_LCSR_INTEN_ACFLEN       (1<<8)	/* AC Fail */
+#define TSI148_LCSR_INTEN_IRQ7EN       (1<<7)	/* IRQ7 */
+#define TSI148_LCSR_INTEN_IRQ6EN       (1<<6)	/* IRQ6 */
+#define TSI148_LCSR_INTEN_IRQ5EN       (1<<5)	/* IRQ5 */
+#define TSI148_LCSR_INTEN_IRQ4EN       (1<<4)	/* IRQ4 */
+#define TSI148_LCSR_INTEN_IRQ3EN       (1<<3)	/* IRQ3 */
+#define TSI148_LCSR_INTEN_IRQ2EN       (1<<2)	/* IRQ2 */
+#define TSI148_LCSR_INTEN_IRQ1EN       (1<<1)	/* IRQ1 */
+
+static const int TSI148_LCSR_INTEN_LMEN[4] = { TSI148_LCSR_INTEN_LM0EN,
+					TSI148_LCSR_INTEN_LM1EN,
+					TSI148_LCSR_INTEN_LM2EN,
+					TSI148_LCSR_INTEN_LM3EN };
+
+static const int TSI148_LCSR_INTEN_IRQEN[7] = { TSI148_LCSR_INTEN_IRQ1EN,
+					TSI148_LCSR_INTEN_IRQ2EN,
+					TSI148_LCSR_INTEN_IRQ3EN,
+					TSI148_LCSR_INTEN_IRQ4EN,
+					TSI148_LCSR_INTEN_IRQ5EN,
+					TSI148_LCSR_INTEN_IRQ6EN,
+					TSI148_LCSR_INTEN_IRQ7EN };
+
+/*
+ *  Interrupt Enable Out Register CRG + $444
+ */
+#define TSI148_LCSR_INTEO_DMA1EO       (1<<25)	/* DMAC 1 */
+#define TSI148_LCSR_INTEO_DMA0EO       (1<<24)	/* DMAC 0 */
+#define TSI148_LCSR_INTEO_LM3EO        (1<<23)	/* Loc Monitor 3 */
+#define TSI148_LCSR_INTEO_LM2EO        (1<<22)	/* Loc Monitor 2 */
+#define TSI148_LCSR_INTEO_LM1EO        (1<<21)	/* Loc Monitor 1 */
+#define TSI148_LCSR_INTEO_LM0EO        (1<<20)	/* Location Monitor 0 */
+#define TSI148_LCSR_INTEO_MB3EO        (1<<19)	/* Mail Box 3 */
+#define TSI148_LCSR_INTEO_MB2EO        (1<<18)	/* Mail Box 2 */
+#define TSI148_LCSR_INTEO_MB1EO        (1<<17)	/* Mail Box 1 */
+#define TSI148_LCSR_INTEO_MB0EO        (1<<16)	/* Mail Box 0 */
+#define TSI148_LCSR_INTEO_PERREO       (1<<13)	/* PCI/X Error */
+#define TSI148_LCSR_INTEO_VERREO       (1<<12)	/* VMEbus Error */
+#define TSI148_LCSR_INTEO_VIEEO        (1<<11)	/* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTEO_IACKEO       (1<<10)	/* IACK */
+#define TSI148_LCSR_INTEO_SYSFLEO      (1<<9)	/* System Fail */
+#define TSI148_LCSR_INTEO_ACFLEO       (1<<8)	/* AC Fail */
+#define TSI148_LCSR_INTEO_IRQ7EO       (1<<7)	/* IRQ7 */
+#define TSI148_LCSR_INTEO_IRQ6EO       (1<<6)	/* IRQ6 */
+#define TSI148_LCSR_INTEO_IRQ5EO       (1<<5)	/* IRQ5 */
+#define TSI148_LCSR_INTEO_IRQ4EO       (1<<4)	/* IRQ4 */
+#define TSI148_LCSR_INTEO_IRQ3EO       (1<<3)	/* IRQ3 */
+#define TSI148_LCSR_INTEO_IRQ2EO       (1<<2)	/* IRQ2 */
+#define TSI148_LCSR_INTEO_IRQ1EO       (1<<1)	/* IRQ1 */
+
+static const int TSI148_LCSR_INTEO_LMEO[4] = { TSI148_LCSR_INTEO_LM0EO,
+					TSI148_LCSR_INTEO_LM1EO,
+					TSI148_LCSR_INTEO_LM2EO,
+					TSI148_LCSR_INTEO_LM3EO };
+
+static const int TSI148_LCSR_INTEO_IRQEO[7] = { TSI148_LCSR_INTEO_IRQ1EO,
+					TSI148_LCSR_INTEO_IRQ2EO,
+					TSI148_LCSR_INTEO_IRQ3EO,
+					TSI148_LCSR_INTEO_IRQ4EO,
+					TSI148_LCSR_INTEO_IRQ5EO,
+					TSI148_LCSR_INTEO_IRQ6EO,
+					TSI148_LCSR_INTEO_IRQ7EO };
+
+/*
+ *  Interrupt Status Register CRG + $448
+ */
+#define TSI148_LCSR_INTS_DMA1S         (1<<25)	/* DMA 1 */
+#define TSI148_LCSR_INTS_DMA0S         (1<<24)	/* DMA 0 */
+#define TSI148_LCSR_INTS_LM3S          (1<<23)	/* Location Monitor 3 */
+#define TSI148_LCSR_INTS_LM2S          (1<<22)	/* Location Monitor 2 */
+#define TSI148_LCSR_INTS_LM1S          (1<<21)	/* Location Monitor 1 */
+#define TSI148_LCSR_INTS_LM0S          (1<<20)	/* Location Monitor 0 */
+#define TSI148_LCSR_INTS_MB3S          (1<<19)	/* Mail Box 3 */
+#define TSI148_LCSR_INTS_MB2S          (1<<18)	/* Mail Box 2 */
+#define TSI148_LCSR_INTS_MB1S          (1<<17)	/* Mail Box 1 */
+#define TSI148_LCSR_INTS_MB0S          (1<<16)	/* Mail Box 0 */
+#define TSI148_LCSR_INTS_PERRS         (1<<13)	/* PCI/X Error */
+#define TSI148_LCSR_INTS_VERRS         (1<<12)	/* VMEbus Error */
+#define TSI148_LCSR_INTS_VIES          (1<<11)	/* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTS_IACKS         (1<<10)	/* IACK */
+#define TSI148_LCSR_INTS_SYSFLS        (1<<9)	/* System Fail */
+#define TSI148_LCSR_INTS_ACFLS         (1<<8)	/* AC Fail */
+#define TSI148_LCSR_INTS_IRQ7S         (1<<7)	/* IRQ7 */
+#define TSI148_LCSR_INTS_IRQ6S         (1<<6)	/* IRQ6 */
+#define TSI148_LCSR_INTS_IRQ5S         (1<<5)	/* IRQ5 */
+#define TSI148_LCSR_INTS_IRQ4S         (1<<4)	/* IRQ4 */
+#define TSI148_LCSR_INTS_IRQ3S         (1<<3)	/* IRQ3 */
+#define TSI148_LCSR_INTS_IRQ2S         (1<<2)	/* IRQ2 */
+#define TSI148_LCSR_INTS_IRQ1S         (1<<1)	/* IRQ1 */
+
+static const int TSI148_LCSR_INTS_LMS[4] = { TSI148_LCSR_INTS_LM0S,
+					TSI148_LCSR_INTS_LM1S,
+					TSI148_LCSR_INTS_LM2S,
+					TSI148_LCSR_INTS_LM3S };
+
+static const int TSI148_LCSR_INTS_MBS[4] = { TSI148_LCSR_INTS_MB0S,
+					TSI148_LCSR_INTS_MB1S,
+					TSI148_LCSR_INTS_MB2S,
+					TSI148_LCSR_INTS_MB3S };
+
+/*
+ *  Interrupt Clear Register CRG + $44C
+ */
+#define TSI148_LCSR_INTC_DMA1C         (1<<25)	/* DMA 1 */
+#define TSI148_LCSR_INTC_DMA0C         (1<<24)	/* DMA 0 */
+#define TSI148_LCSR_INTC_LM3C          (1<<23)	/* Location Monitor 3 */
+#define TSI148_LCSR_INTC_LM2C          (1<<22)	/* Location Monitor 2 */
+#define TSI148_LCSR_INTC_LM1C          (1<<21)	/* Location Monitor 1 */
+#define TSI148_LCSR_INTC_LM0C          (1<<20)	/* Location Monitor 0 */
+#define TSI148_LCSR_INTC_MB3C          (1<<19)	/* Mail Box 3 */
+#define TSI148_LCSR_INTC_MB2C          (1<<18)	/* Mail Box 2 */
+#define TSI148_LCSR_INTC_MB1C          (1<<17)	/* Mail Box 1 */
+#define TSI148_LCSR_INTC_MB0C          (1<<16)	/* Mail Box 0 */
+#define TSI148_LCSR_INTC_PERRC         (1<<13)	/* VMEbus Error */
+#define TSI148_LCSR_INTC_VERRC         (1<<12)	/* VMEbus Access Time-out */
+#define TSI148_LCSR_INTC_VIEC          (1<<11)	/* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTC_IACKC         (1<<10)	/* IACK */
+#define TSI148_LCSR_INTC_SYSFLC        (1<<9)	/* System Fail */
+#define TSI148_LCSR_INTC_ACFLC         (1<<8)	/* AC Fail */
+
+static const int TSI148_LCSR_INTC_LMC[4] = { TSI148_LCSR_INTC_LM0C,
+					TSI148_LCSR_INTC_LM1C,
+					TSI148_LCSR_INTC_LM2C,
+					TSI148_LCSR_INTC_LM3C };
+
+static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
+					TSI148_LCSR_INTC_MB1C,
+					TSI148_LCSR_INTC_MB2C,
+					TSI148_LCSR_INTC_MB3C };
+
+/*
+ *  Interrupt Map Register 1 CRG + $458
+ */
+#define TSI148_LCSR_INTM1_DMA1M_M      (3<<18)	/* DMA 1 */
+#define TSI148_LCSR_INTM1_DMA0M_M      (3<<16)	/* DMA 0 */
+#define TSI148_LCSR_INTM1_LM3M_M       (3<<14)	/* Location Monitor 3 */
+#define TSI148_LCSR_INTM1_LM2M_M       (3<<12)	/* Location Monitor 2 */
+#define TSI148_LCSR_INTM1_LM1M_M       (3<<10)	/* Location Monitor 1 */
+#define TSI148_LCSR_INTM1_LM0M_M       (3<<8)	/* Location Monitor 0 */
+#define TSI148_LCSR_INTM1_MB3M_M       (3<<6)	/* Mail Box 3 */
+#define TSI148_LCSR_INTM1_MB2M_M       (3<<4)	/* Mail Box 2 */
+#define TSI148_LCSR_INTM1_MB1M_M       (3<<2)	/* Mail Box 1 */
+#define TSI148_LCSR_INTM1_MB0M_M       (3<<0)	/* Mail Box 0 */
+
+/*
+ *  Interrupt Map Register 2 CRG + $45C
+ */
+#define TSI148_LCSR_INTM2_PERRM_M      (3<<26)	/* PCI Bus Error */
+#define TSI148_LCSR_INTM2_VERRM_M      (3<<24)	/* VMEbus Error */
+#define TSI148_LCSR_INTM2_VIEM_M       (3<<22)	/* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTM2_IACKM_M      (3<<20)	/* IACK */
+#define TSI148_LCSR_INTM2_SYSFLM_M     (3<<18)	/* System Fail */
+#define TSI148_LCSR_INTM2_ACFLM_M      (3<<16)	/* AC Fail */
+#define TSI148_LCSR_INTM2_IRQ7M_M      (3<<14)	/* IRQ7 */
+#define TSI148_LCSR_INTM2_IRQ6M_M      (3<<12)	/* IRQ6 */
+#define TSI148_LCSR_INTM2_IRQ5M_M      (3<<10)	/* IRQ5 */
+#define TSI148_LCSR_INTM2_IRQ4M_M      (3<<8)	/* IRQ4 */
+#define TSI148_LCSR_INTM2_IRQ3M_M      (3<<6)	/* IRQ3 */
+#define TSI148_LCSR_INTM2_IRQ2M_M      (3<<4)	/* IRQ2 */
+#define TSI148_LCSR_INTM2_IRQ1M_M      (3<<2)	/* IRQ1 */
+
+/*
+ *  DMA Control (0-1) Registers CRG + $500
+ */
+#define TSI148_LCSR_DCTL_ABT           (1<<27)	/* Abort */
+#define TSI148_LCSR_DCTL_PAU           (1<<26)	/* Pause */
+#define TSI148_LCSR_DCTL_DGO           (1<<25)	/* DMA Go */
+
+#define TSI148_LCSR_DCTL_MOD           (1<<23)	/* Mode */
+
+#define TSI148_LCSR_DCTL_VBKS_M        (7<<12)	/* VMEbus block Size MASK */
+#define TSI148_LCSR_DCTL_VBKS_32       (0<<12)	/* VMEbus block Size 32 */
+#define TSI148_LCSR_DCTL_VBKS_64       (1<<12)	/* VMEbus block Size 64 */
+#define TSI148_LCSR_DCTL_VBKS_128      (2<<12)	/* VMEbus block Size 128 */
+#define TSI148_LCSR_DCTL_VBKS_256      (3<<12)	/* VMEbus block Size 256 */
+#define TSI148_LCSR_DCTL_VBKS_512      (4<<12)	/* VMEbus block Size 512 */
+#define TSI148_LCSR_DCTL_VBKS_1024     (5<<12)	/* VMEbus block Size 1024 */
+#define TSI148_LCSR_DCTL_VBKS_2048     (6<<12)	/* VMEbus block Size 2048 */
+#define TSI148_LCSR_DCTL_VBKS_4096     (7<<12)	/* VMEbus block Size 4096 */
+
+#define TSI148_LCSR_DCTL_VBOT_M        (7<<8)	/* VMEbus back-off MASK */
+#define TSI148_LCSR_DCTL_VBOT_0        (0<<8)	/* VMEbus back-off  0us */
+#define TSI148_LCSR_DCTL_VBOT_1        (1<<8)	/* VMEbus back-off 1us */
+#define TSI148_LCSR_DCTL_VBOT_2        (2<<8)	/* VMEbus back-off 2us */
+#define TSI148_LCSR_DCTL_VBOT_4        (3<<8)	/* VMEbus back-off 4us */
+#define TSI148_LCSR_DCTL_VBOT_8        (4<<8)	/* VMEbus back-off 8us */
+#define TSI148_LCSR_DCTL_VBOT_16       (5<<8)	/* VMEbus back-off 16us */
+#define TSI148_LCSR_DCTL_VBOT_32       (6<<8)	/* VMEbus back-off 32us */
+#define TSI148_LCSR_DCTL_VBOT_64       (7<<8)	/* VMEbus back-off 64us */
+
+#define TSI148_LCSR_DCTL_PBKS_M        (7<<4)	/* PCI block size MASK */
+#define TSI148_LCSR_DCTL_PBKS_32       (0<<4)	/* PCI block size 32 bytes */
+#define TSI148_LCSR_DCTL_PBKS_64       (1<<4)	/* PCI block size 64 bytes */
+#define TSI148_LCSR_DCTL_PBKS_128      (2<<4)	/* PCI block size 128 bytes */
+#define TSI148_LCSR_DCTL_PBKS_256      (3<<4)	/* PCI block size 256 bytes */
+#define TSI148_LCSR_DCTL_PBKS_512      (4<<4)	/* PCI block size 512 bytes */
+#define TSI148_LCSR_DCTL_PBKS_1024     (5<<4)	/* PCI block size 1024 bytes */
+#define TSI148_LCSR_DCTL_PBKS_2048     (6<<4)	/* PCI block size 2048 bytes */
+#define TSI148_LCSR_DCTL_PBKS_4096     (7<<4)	/* PCI block size 4096 bytes */
+
+#define TSI148_LCSR_DCTL_PBOT_M        (7<<0)	/* PCI back off MASK */
+#define TSI148_LCSR_DCTL_PBOT_0        (0<<0)	/* PCI back off 0us */
+#define TSI148_LCSR_DCTL_PBOT_1        (1<<0)	/* PCI back off 1us */
+#define TSI148_LCSR_DCTL_PBOT_2        (2<<0)	/* PCI back off 2us */
+#define TSI148_LCSR_DCTL_PBOT_4        (3<<0)	/* PCI back off 3us */
+#define TSI148_LCSR_DCTL_PBOT_8        (4<<0)	/* PCI back off 4us */
+#define TSI148_LCSR_DCTL_PBOT_16       (5<<0)	/* PCI back off 8us */
+#define TSI148_LCSR_DCTL_PBOT_32       (6<<0)	/* PCI back off 16us */
+#define TSI148_LCSR_DCTL_PBOT_64       (7<<0)	/* PCI back off 32us */
+
+/*
+ *  DMA Status Registers (0-1)  CRG + $504
+ */
+#define TSI148_LCSR_DSTA_SMA           (1<<31)	/* PCI Signalled Master Abt */
+#define TSI148_LCSR_DSTA_RTA           (1<<30)	/* PCI Received Target Abt */
+#define TSI148_LCSR_DSTA_MRC           (1<<29)	/* PCI Max Retry Count */
+#define TSI148_LCSR_DSTA_VBE           (1<<28)	/* VMEbus error */
+#define TSI148_LCSR_DSTA_ABT           (1<<27)	/* Abort */
+#define TSI148_LCSR_DSTA_PAU           (1<<26)	/* Pause */
+#define TSI148_LCSR_DSTA_DON           (1<<25)	/* Done */
+#define TSI148_LCSR_DSTA_BSY           (1<<24)	/* Busy */
+
+/*
+ *  DMA Current Link Address Lower (0-1)
+ */
+#define TSI148_LCSR_DCLAL_M            (0x3FFFFFF<<6)	/* Mask */
+
+/*
+ *  DMA Source Attribute (0-1) Reg
+ */
+#define TSI148_LCSR_DSAT_TYP_M         (3<<28)	/* Source Bus Type */
+#define TSI148_LCSR_DSAT_TYP_PCI       (0<<28)	/* PCI Bus */
+#define TSI148_LCSR_DSAT_TYP_VME       (1<<28)	/* VMEbus */
+#define TSI148_LCSR_DSAT_TYP_PAT       (2<<28)	/* Data Pattern */
+
+#define TSI148_LCSR_DSAT_PSZ           (1<<25)	/* Pattern Size */
+#define TSI148_LCSR_DSAT_NIN           (1<<24)	/* No Increment */
+
+#define TSI148_LCSR_DSAT_2eSSTM_M      (3<<11)	/* 2eSST Trans Rate Mask */
+#define TSI148_LCSR_DSAT_2eSSTM_160    (0<<11)	/* 160 MB/s */
+#define TSI148_LCSR_DSAT_2eSSTM_267    (1<<11)	/* 267 MB/s */
+#define TSI148_LCSR_DSAT_2eSSTM_320    (2<<11)	/* 320 MB/s */
+
+#define TSI148_LCSR_DSAT_TM_M          (7<<8)	/* Bus Transfer Protocol Mask */
+#define TSI148_LCSR_DSAT_TM_SCT        (0<<8)	/* SCT */
+#define TSI148_LCSR_DSAT_TM_BLT        (1<<8)	/* BLT */
+#define TSI148_LCSR_DSAT_TM_MBLT       (2<<8)	/* MBLT */
+#define TSI148_LCSR_DSAT_TM_2eVME      (3<<8)	/* 2eVME */
+#define TSI148_LCSR_DSAT_TM_2eSST      (4<<8)	/* 2eSST */
+#define TSI148_LCSR_DSAT_TM_2eSSTB     (5<<8)	/* 2eSST Broadcast */
+
+#define TSI148_LCSR_DSAT_DBW_M         (3<<6)	/* Max Data Width MASK */
+#define TSI148_LCSR_DSAT_DBW_16        (0<<6)	/* 16 Bits */
+#define TSI148_LCSR_DSAT_DBW_32        (1<<6)	/* 32 Bits */
+
+#define TSI148_LCSR_DSAT_SUP           (1<<5)	/* Supervisory Mode */
+#define TSI148_LCSR_DSAT_PGM           (1<<4)	/* Program Mode */
+
+#define TSI148_LCSR_DSAT_AMODE_M       (0xf<<0)	/* Address Space Mask */
+#define TSI148_LCSR_DSAT_AMODE_A16     (0<<0)	/* A16 */
+#define TSI148_LCSR_DSAT_AMODE_A24     (1<<0)	/* A24 */
+#define TSI148_LCSR_DSAT_AMODE_A32     (2<<0)	/* A32 */
+#define TSI148_LCSR_DSAT_AMODE_A64     (4<<0)	/* A64 */
+#define TSI148_LCSR_DSAT_AMODE_CRCSR   (5<<0)	/* CR/CSR */
+#define TSI148_LCSR_DSAT_AMODE_USER1   (8<<0)	/* User1 */
+#define TSI148_LCSR_DSAT_AMODE_USER2   (9<<0)	/* User2 */
+#define TSI148_LCSR_DSAT_AMODE_USER3   (0xa<<0)	/* User3 */
+#define TSI148_LCSR_DSAT_AMODE_USER4   (0xb<<0)	/* User4 */
+
+/*
+ *  DMA Destination Attribute Registers (0-1)
+ */
+#define TSI148_LCSR_DDAT_TYP_PCI       (0<<28)	/* Destination PCI Bus  */
+#define TSI148_LCSR_DDAT_TYP_VME       (1<<28)	/* Destination VMEbus */
+
+#define TSI148_LCSR_DDAT_2eSSTM_M      (3<<11)	/* 2eSST Transfer Rate Mask */
+#define TSI148_LCSR_DDAT_2eSSTM_160    (0<<11)	/* 160 MB/s */
+#define TSI148_LCSR_DDAT_2eSSTM_267    (1<<11)	/* 267 MB/s */
+#define TSI148_LCSR_DDAT_2eSSTM_320    (2<<11)	/* 320 MB/s */
+
+#define TSI148_LCSR_DDAT_TM_M          (7<<8)	/* Bus Transfer Protocol Mask */
+#define TSI148_LCSR_DDAT_TM_SCT        (0<<8)	/* SCT */
+#define TSI148_LCSR_DDAT_TM_BLT        (1<<8)	/* BLT */
+#define TSI148_LCSR_DDAT_TM_MBLT       (2<<8)	/* MBLT */
+#define TSI148_LCSR_DDAT_TM_2eVME      (3<<8)	/* 2eVME */
+#define TSI148_LCSR_DDAT_TM_2eSST      (4<<8)	/* 2eSST */
+#define TSI148_LCSR_DDAT_TM_2eSSTB     (5<<8)	/* 2eSST Broadcast */
+
+#define TSI148_LCSR_DDAT_DBW_M         (3<<6)	/* Max Data Width MASK */
+#define TSI148_LCSR_DDAT_DBW_16        (0<<6)	/* 16 Bits */
+#define TSI148_LCSR_DDAT_DBW_32        (1<<6)	/* 32 Bits */
+
+#define TSI148_LCSR_DDAT_SUP           (1<<5)	/* Supervisory/User Access */
+#define TSI148_LCSR_DDAT_PGM           (1<<4)	/* Program/Data Access */
+
+#define TSI148_LCSR_DDAT_AMODE_M       (0xf<<0)	/* Address Space Mask */
+#define TSI148_LCSR_DDAT_AMODE_A16      (0<<0)	/* A16 */
+#define TSI148_LCSR_DDAT_AMODE_A24      (1<<0)	/* A24 */
+#define TSI148_LCSR_DDAT_AMODE_A32      (2<<0)	/* A32 */
+#define TSI148_LCSR_DDAT_AMODE_A64      (4<<0)	/* A64 */
+#define TSI148_LCSR_DDAT_AMODE_CRCSR   (5<<0)	/* CRC/SR */
+#define TSI148_LCSR_DDAT_AMODE_USER1   (8<<0)	/* User1 */
+#define TSI148_LCSR_DDAT_AMODE_USER2   (9<<0)	/* User2 */
+#define TSI148_LCSR_DDAT_AMODE_USER3   (0xa<<0)	/* User3 */
+#define TSI148_LCSR_DDAT_AMODE_USER4   (0xb<<0)	/* User4 */
+
+/*
+ *  DMA Next Link Address Lower
+ */
+#define TSI148_LCSR_DNLAL_DNLAL_M      (0x3FFFFFF<<6)	/* Address Mask */
+#define TSI148_LCSR_DNLAL_LLA          (1<<0)  /* Last Link Address Indicator */
+
+/*
+ *  DMA 2eSST Broadcast Select
+ */
+#define TSI148_LCSR_DBS_M              (0x1FFFFF<<0)	/* Mask */
+
+/*
+ *  GCSR Register Group
+ */
+
+/*
+ *  GCSR Control and Status Register  CRG + $604
+ */
+#define TSI148_GCSR_GCTRL_LRST         (1<<15)	/* Local Reset */
+#define TSI148_GCSR_GCTRL_SFAILEN      (1<<14)	/* System Fail enable */
+#define TSI148_GCSR_GCTRL_BDFAILS      (1<<13)	/* Board Fail Status */
+#define TSI148_GCSR_GCTRL_SCON         (1<<12)	/* System Copntroller */
+#define TSI148_GCSR_GCTRL_MEN          (1<<11)	/* Module Enable (READY) */
+
+#define TSI148_GCSR_GCTRL_LMI3S        (1<<7)	/* Loc Monitor 3 Int Status */
+#define TSI148_GCSR_GCTRL_LMI2S        (1<<6)	/* Loc Monitor 2 Int Status */
+#define TSI148_GCSR_GCTRL_LMI1S        (1<<5)	/* Loc Monitor 1 Int Status */
+#define TSI148_GCSR_GCTRL_LMI0S        (1<<4)	/* Loc Monitor 0 Int Status */
+#define TSI148_GCSR_GCTRL_MBI3S        (1<<3)	/* Mail box 3 Int Status */
+#define TSI148_GCSR_GCTRL_MBI2S        (1<<2)	/* Mail box 2 Int Status */
+#define TSI148_GCSR_GCTRL_MBI1S        (1<<1)	/* Mail box 1 Int Status */
+#define TSI148_GCSR_GCTRL_MBI0S        (1<<0)	/* Mail box 0 Int Status */
+
+#define TSI148_GCSR_GAP                (1<<5)	/* Geographic Addr Parity */
+#define TSI148_GCSR_GA_M               (0x1F<<0)  /* Geographic Address Mask */
+
+/*
+ *  CR/CSR Register Group
+ */
+
+/*
+ *  CR/CSR Bit Clear Register CRG + $FF4
+ */
+#define TSI148_CRCSR_CSRBCR_LRSTC      (1<<7)	/* Local Reset Clear */
+#define TSI148_CRCSR_CSRBCR_SFAILC     (1<<6)	/* System Fail Enable Clear */
+#define TSI148_CRCSR_CSRBCR_BDFAILS    (1<<5)	/* Board Fail Status */
+#define TSI148_CRCSR_CSRBCR_MENC       (1<<4)	/* Module Enable Clear */
+#define TSI148_CRCSR_CSRBCR_BERRSC     (1<<3)	/* Bus Error Status Clear */
+
+/*
+ *  CR/CSR Bit Set Register CRG+$FF8
+ */
+#define TSI148_CRCSR_CSRBSR_LISTS      (1<<7)	/* Local Reset Clear */
+#define TSI148_CRCSR_CSRBSR_SFAILS     (1<<6)	/* System Fail Enable Clear */
+#define TSI148_CRCSR_CSRBSR_BDFAILS    (1<<5)	/* Board Fail Status */
+#define TSI148_CRCSR_CSRBSR_MENS       (1<<4)	/* Module Enable Clear */
+#define TSI148_CRCSR_CSRBSR_BERRS      (1<<3)	/* Bus Error Status Clear */
+
+/*
+ *  CR/CSR Base Address Register CRG + FFC
+ */
+#define TSI148_CRCSR_CBAR_M            (0x1F<<3)	/* Mask */
+
+#endif				/* TSI148_H */
diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c
new file mode 100644
index 000000000..b39829398
--- /dev/null
+++ b/drivers/vme/vme.c
@@ -0,0 +1,2026 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * VME Bridge Framework
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * Based on work by Tom Armistead and Ajit Prem
+ * Copyright 2004 Motorola Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/pagemap.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/syscalls.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/vme.h>
+
+#include "vme_bridge.h"
+
+/* Bitmask and list of registered buses both protected by common mutex */
+static unsigned int vme_bus_numbers;
+static LIST_HEAD(vme_bus_list);
+static DEFINE_MUTEX(vme_buses_lock);
+
+static int __init vme_init(void);
+
+static struct vme_dev *dev_to_vme_dev(struct device *dev)
+{
+	return container_of(dev, struct vme_dev, dev);
+}
+
+/*
+ * Find the bridge that the resource is associated with.
+ */
+static struct vme_bridge *find_bridge(struct vme_resource *resource)
+{
+	/* Get list to search */
+	switch (resource->type) {
+	case VME_MASTER:
+		return list_entry(resource->entry, struct vme_master_resource,
+			list)->parent;
+		break;
+	case VME_SLAVE:
+		return list_entry(resource->entry, struct vme_slave_resource,
+			list)->parent;
+		break;
+	case VME_DMA:
+		return list_entry(resource->entry, struct vme_dma_resource,
+			list)->parent;
+		break;
+	case VME_LM:
+		return list_entry(resource->entry, struct vme_lm_resource,
+			list)->parent;
+		break;
+	default:
+		printk(KERN_ERR "Unknown resource type\n");
+		return NULL;
+		break;
+	}
+}
+
+/**
+ * vme_free_consistent - Allocate contiguous memory.
+ * @resource: Pointer to VME resource.
+ * @size: Size of allocation required.
+ * @dma: Pointer to variable to store physical address of allocation.
+ *
+ * Allocate a contiguous block of memory for use by the driver. This is used to
+ * create the buffers for the slave windows.
+ *
+ * Return: Virtual address of allocation on success, NULL on failure.
+ */
+void *vme_alloc_consistent(struct vme_resource *resource, size_t size,
+	dma_addr_t *dma)
+{
+	struct vme_bridge *bridge;
+
+	if (!resource) {
+		printk(KERN_ERR "No resource\n");
+		return NULL;
+	}
+
+	bridge = find_bridge(resource);
+	if (!bridge) {
+		printk(KERN_ERR "Can't find bridge\n");
+		return NULL;
+	}
+
+	if (!bridge->parent) {
+		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
+		return NULL;
+	}
+
+	if (!bridge->alloc_consistent) {
+		printk(KERN_ERR "alloc_consistent not supported by bridge %s\n",
+		       bridge->name);
+		return NULL;
+	}
+
+	return bridge->alloc_consistent(bridge->parent, size, dma);
+}
+EXPORT_SYMBOL(vme_alloc_consistent);
+
+/**
+ * vme_free_consistent - Free previously allocated memory.
+ * @resource: Pointer to VME resource.
+ * @size: Size of allocation to free.
+ * @vaddr: Virtual address of allocation.
+ * @dma: Physical address of allocation.
+ *
+ * Free previously allocated block of contiguous memory.
+ */
+void vme_free_consistent(struct vme_resource *resource, size_t size,
+	void *vaddr, dma_addr_t dma)
+{
+	struct vme_bridge *bridge;
+
+	if (!resource) {
+		printk(KERN_ERR "No resource\n");
+		return;
+	}
+
+	bridge = find_bridge(resource);
+	if (!bridge) {
+		printk(KERN_ERR "Can't find bridge\n");
+		return;
+	}
+
+	if (!bridge->parent) {
+		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
+		return;
+	}
+
+	if (!bridge->free_consistent) {
+		printk(KERN_ERR "free_consistent not supported by bridge %s\n",
+		       bridge->name);
+		return;
+	}
+
+	bridge->free_consistent(bridge->parent, size, vaddr, dma);
+}
+EXPORT_SYMBOL(vme_free_consistent);
+
+/**
+ * vme_get_size - Helper function returning size of a VME window
+ * @resource: Pointer to VME slave or master resource.
+ *
+ * Determine the size of the VME window provided. This is a helper
+ * function, wrappering the call to vme_master_get or vme_slave_get
+ * depending on the type of window resource handed to it.
+ *
+ * Return: Size of the window on success, zero on failure.
+ */
+size_t vme_get_size(struct vme_resource *resource)
+{
+	int enabled, retval;
+	unsigned long long base, size;
+	dma_addr_t buf_base;
+	u32 aspace, cycle, dwidth;
+
+	switch (resource->type) {
+	case VME_MASTER:
+		retval = vme_master_get(resource, &enabled, &base, &size,
+			&aspace, &cycle, &dwidth);
+		if (retval)
+			return 0;
+
+		return size;
+		break;
+	case VME_SLAVE:
+		retval = vme_slave_get(resource, &enabled, &base, &size,
+			&buf_base, &aspace, &cycle);
+		if (retval)
+			return 0;
+
+		return size;
+		break;
+	case VME_DMA:
+		return 0;
+		break;
+	default:
+		printk(KERN_ERR "Unknown resource type\n");
+		return 0;
+		break;
+	}
+}
+EXPORT_SYMBOL(vme_get_size);
+
+int vme_check_window(u32 aspace, unsigned long long vme_base,
+		     unsigned long long size)
+{
+	int retval = 0;
+
+	if (vme_base + size < size)
+		return -EINVAL;
+
+	switch (aspace) {
+	case VME_A16:
+		if (vme_base + size > VME_A16_MAX)
+			retval = -EFAULT;
+		break;
+	case VME_A24:
+		if (vme_base + size > VME_A24_MAX)
+			retval = -EFAULT;
+		break;
+	case VME_A32:
+		if (vme_base + size > VME_A32_MAX)
+			retval = -EFAULT;
+		break;
+	case VME_A64:
+		/* The VME_A64_MAX limit is actually U64_MAX + 1 */
+		break;
+	case VME_CRCSR:
+		if (vme_base + size > VME_CRCSR_MAX)
+			retval = -EFAULT;
+		break;
+	case VME_USER1:
+	case VME_USER2:
+	case VME_USER3:
+	case VME_USER4:
+		/* User Defined */
+		break;
+	default:
+		printk(KERN_ERR "Invalid address space\n");
+		retval = -EINVAL;
+		break;
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(vme_check_window);
+
+static u32 vme_get_aspace(int am)
+{
+	switch (am) {
+	case 0x29:
+	case 0x2D:
+		return VME_A16;
+	case 0x38:
+	case 0x39:
+	case 0x3A:
+	case 0x3B:
+	case 0x3C:
+	case 0x3D:
+	case 0x3E:
+	case 0x3F:
+		return VME_A24;
+	case 0x8:
+	case 0x9:
+	case 0xA:
+	case 0xB:
+	case 0xC:
+	case 0xD:
+	case 0xE:
+	case 0xF:
+		return VME_A32;
+	case 0x0:
+	case 0x1:
+	case 0x3:
+		return VME_A64;
+	}
+
+	return 0;
+}
+
+/**
+ * vme_slave_request - Request a VME slave window resource.
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ * @address: Required VME address space.
+ * @cycle: Required VME data transfer cycle type.
+ *
+ * Request use of a VME window resource capable of being set for the requested
+ * address space and data transfer cycle.
+ *
+ * Return: Pointer to VME resource on success, NULL on failure.
+ */
+struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address,
+	u32 cycle)
+{
+	struct vme_bridge *bridge;
+	struct list_head *slave_pos = NULL;
+	struct vme_slave_resource *allocated_image = NULL;
+	struct vme_slave_resource *slave_image = NULL;
+	struct vme_resource *resource = NULL;
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		printk(KERN_ERR "Can't find VME bus\n");
+		goto err_bus;
+	}
+
+	/* Loop through slave resources */
+	list_for_each(slave_pos, &bridge->slave_resources) {
+		slave_image = list_entry(slave_pos,
+			struct vme_slave_resource, list);
+
+		if (!slave_image) {
+			printk(KERN_ERR "Registered NULL Slave resource\n");
+			continue;
+		}
+
+		/* Find an unlocked and compatible image */
+		mutex_lock(&slave_image->mtx);
+		if (((slave_image->address_attr & address) == address) &&
+			((slave_image->cycle_attr & cycle) == cycle) &&
+			(slave_image->locked == 0)) {
+
+			slave_image->locked = 1;
+			mutex_unlock(&slave_image->mtx);
+			allocated_image = slave_image;
+			break;
+		}
+		mutex_unlock(&slave_image->mtx);
+	}
+
+	/* No free image */
+	if (!allocated_image)
+		goto err_image;
+
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
+		goto err_alloc;
+
+	resource->type = VME_SLAVE;
+	resource->entry = &allocated_image->list;
+
+	return resource;
+
+err_alloc:
+	/* Unlock image */
+	mutex_lock(&slave_image->mtx);
+	slave_image->locked = 0;
+	mutex_unlock(&slave_image->mtx);
+err_image:
+err_bus:
+	return NULL;
+}
+EXPORT_SYMBOL(vme_slave_request);
+
+/**
+ * vme_slave_set - Set VME slave window configuration.
+ * @resource: Pointer to VME slave resource.
+ * @enabled: State to which the window should be configured.
+ * @vme_base: Base address for the window.
+ * @size: Size of the VME window.
+ * @buf_base: Based address of buffer used to provide VME slave window storage.
+ * @aspace: VME address space for the VME window.
+ * @cycle: VME data transfer cycle type for the VME window.
+ *
+ * Set configuration for provided VME slave window.
+ *
+ * Return: Zero on success, -EINVAL if operation is not supported on this
+ *         device, if an invalid resource has been provided or invalid
+ *         attributes are provided. Hardware specific errors may also be
+ *         returned.
+ */
+int vme_slave_set(struct vme_resource *resource, int enabled,
+	unsigned long long vme_base, unsigned long long size,
+	dma_addr_t buf_base, u32 aspace, u32 cycle)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_slave_resource *image;
+	int retval;
+
+	if (resource->type != VME_SLAVE) {
+		printk(KERN_ERR "Not a slave resource\n");
+		return -EINVAL;
+	}
+
+	image = list_entry(resource->entry, struct vme_slave_resource, list);
+
+	if (!bridge->slave_set) {
+		printk(KERN_ERR "Function not supported\n");
+		return -ENOSYS;
+	}
+
+	if (!(((image->address_attr & aspace) == aspace) &&
+		((image->cycle_attr & cycle) == cycle))) {
+		printk(KERN_ERR "Invalid attributes\n");
+		return -EINVAL;
+	}
+
+	retval = vme_check_window(aspace, vme_base, size);
+	if (retval)
+		return retval;
+
+	return bridge->slave_set(image, enabled, vme_base, size, buf_base,
+		aspace, cycle);
+}
+EXPORT_SYMBOL(vme_slave_set);
+
+/**
+ * vme_slave_get - Retrieve VME slave window configuration.
+ * @resource: Pointer to VME slave resource.
+ * @enabled: Pointer to variable for storing state.
+ * @vme_base: Pointer to variable for storing window base address.
+ * @size: Pointer to variable for storing window size.
+ * @buf_base: Pointer to variable for storing slave buffer base address.
+ * @aspace: Pointer to variable for storing VME address space.
+ * @cycle: Pointer to variable for storing VME data transfer cycle type.
+ *
+ * Return configuration for provided VME slave window.
+ *
+ * Return: Zero on success, -EINVAL if operation is not supported on this
+ *         device or if an invalid resource has been provided.
+ */
+int vme_slave_get(struct vme_resource *resource, int *enabled,
+	unsigned long long *vme_base, unsigned long long *size,
+	dma_addr_t *buf_base, u32 *aspace, u32 *cycle)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_slave_resource *image;
+
+	if (resource->type != VME_SLAVE) {
+		printk(KERN_ERR "Not a slave resource\n");
+		return -EINVAL;
+	}
+
+	image = list_entry(resource->entry, struct vme_slave_resource, list);
+
+	if (!bridge->slave_get) {
+		printk(KERN_ERR "vme_slave_get not supported\n");
+		return -EINVAL;
+	}
+
+	return bridge->slave_get(image, enabled, vme_base, size, buf_base,
+		aspace, cycle);
+}
+EXPORT_SYMBOL(vme_slave_get);
+
+/**
+ * vme_slave_free - Free VME slave window
+ * @resource: Pointer to VME slave resource.
+ *
+ * Free the provided slave resource so that it may be reallocated.
+ */
+void vme_slave_free(struct vme_resource *resource)
+{
+	struct vme_slave_resource *slave_image;
+
+	if (resource->type != VME_SLAVE) {
+		printk(KERN_ERR "Not a slave resource\n");
+		return;
+	}
+
+	slave_image = list_entry(resource->entry, struct vme_slave_resource,
+		list);
+	if (!slave_image) {
+		printk(KERN_ERR "Can't find slave resource\n");
+		return;
+	}
+
+	/* Unlock image */
+	mutex_lock(&slave_image->mtx);
+	if (slave_image->locked == 0)
+		printk(KERN_ERR "Image is already free\n");
+
+	slave_image->locked = 0;
+	mutex_unlock(&slave_image->mtx);
+
+	/* Free up resource memory */
+	kfree(resource);
+}
+EXPORT_SYMBOL(vme_slave_free);
+
+/**
+ * vme_master_request - Request a VME master window resource.
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ * @address: Required VME address space.
+ * @cycle: Required VME data transfer cycle type.
+ * @dwidth: Required VME data transfer width.
+ *
+ * Request use of a VME window resource capable of being set for the requested
+ * address space, data transfer cycle and width.
+ *
+ * Return: Pointer to VME resource on success, NULL on failure.
+ */
+struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address,
+	u32 cycle, u32 dwidth)
+{
+	struct vme_bridge *bridge;
+	struct list_head *master_pos = NULL;
+	struct vme_master_resource *allocated_image = NULL;
+	struct vme_master_resource *master_image = NULL;
+	struct vme_resource *resource = NULL;
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		printk(KERN_ERR "Can't find VME bus\n");
+		goto err_bus;
+	}
+
+	/* Loop through master resources */
+	list_for_each(master_pos, &bridge->master_resources) {
+		master_image = list_entry(master_pos,
+			struct vme_master_resource, list);
+
+		if (!master_image) {
+			printk(KERN_WARNING "Registered NULL master resource\n");
+			continue;
+		}
+
+		/* Find an unlocked and compatible image */
+		spin_lock(&master_image->lock);
+		if (((master_image->address_attr & address) == address) &&
+			((master_image->cycle_attr & cycle) == cycle) &&
+			((master_image->width_attr & dwidth) == dwidth) &&
+			(master_image->locked == 0)) {
+
+			master_image->locked = 1;
+			spin_unlock(&master_image->lock);
+			allocated_image = master_image;
+			break;
+		}
+		spin_unlock(&master_image->lock);
+	}
+
+	/* Check to see if we found a resource */
+	if (!allocated_image) {
+		printk(KERN_ERR "Can't find a suitable resource\n");
+		goto err_image;
+	}
+
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
+		goto err_alloc;
+
+	resource->type = VME_MASTER;
+	resource->entry = &allocated_image->list;
+
+	return resource;
+
+err_alloc:
+	/* Unlock image */
+	spin_lock(&master_image->lock);
+	master_image->locked = 0;
+	spin_unlock(&master_image->lock);
+err_image:
+err_bus:
+	return NULL;
+}
+EXPORT_SYMBOL(vme_master_request);
+
+/**
+ * vme_master_set - Set VME master window configuration.
+ * @resource: Pointer to VME master resource.
+ * @enabled: State to which the window should be configured.
+ * @vme_base: Base address for the window.
+ * @size: Size of the VME window.
+ * @aspace: VME address space for the VME window.
+ * @cycle: VME data transfer cycle type for the VME window.
+ * @dwidth: VME data transfer width for the VME window.
+ *
+ * Set configuration for provided VME master window.
+ *
+ * Return: Zero on success, -EINVAL if operation is not supported on this
+ *         device, if an invalid resource has been provided or invalid
+ *         attributes are provided. Hardware specific errors may also be
+ *         returned.
+ */
+int vme_master_set(struct vme_resource *resource, int enabled,
+	unsigned long long vme_base, unsigned long long size, u32 aspace,
+	u32 cycle, u32 dwidth)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_master_resource *image;
+	int retval;
+
+	if (resource->type != VME_MASTER) {
+		printk(KERN_ERR "Not a master resource\n");
+		return -EINVAL;
+	}
+
+	image = list_entry(resource->entry, struct vme_master_resource, list);
+
+	if (!bridge->master_set) {
+		printk(KERN_WARNING "vme_master_set not supported\n");
+		return -EINVAL;
+	}
+
+	if (!(((image->address_attr & aspace) == aspace) &&
+		((image->cycle_attr & cycle) == cycle) &&
+		((image->width_attr & dwidth) == dwidth))) {
+		printk(KERN_WARNING "Invalid attributes\n");
+		return -EINVAL;
+	}
+
+	retval = vme_check_window(aspace, vme_base, size);
+	if (retval)
+		return retval;
+
+	return bridge->master_set(image, enabled, vme_base, size, aspace,
+		cycle, dwidth);
+}
+EXPORT_SYMBOL(vme_master_set);
+
+/**
+ * vme_master_get - Retrieve VME master window configuration.
+ * @resource: Pointer to VME master resource.
+ * @enabled: Pointer to variable for storing state.
+ * @vme_base: Pointer to variable for storing window base address.
+ * @size: Pointer to variable for storing window size.
+ * @aspace: Pointer to variable for storing VME address space.
+ * @cycle: Pointer to variable for storing VME data transfer cycle type.
+ * @dwidth: Pointer to variable for storing VME data transfer width.
+ *
+ * Return configuration for provided VME master window.
+ *
+ * Return: Zero on success, -EINVAL if operation is not supported on this
+ *         device or if an invalid resource has been provided.
+ */
+int vme_master_get(struct vme_resource *resource, int *enabled,
+	unsigned long long *vme_base, unsigned long long *size, u32 *aspace,
+	u32 *cycle, u32 *dwidth)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_master_resource *image;
+
+	if (resource->type != VME_MASTER) {
+		printk(KERN_ERR "Not a master resource\n");
+		return -EINVAL;
+	}
+
+	image = list_entry(resource->entry, struct vme_master_resource, list);
+
+	if (!bridge->master_get) {
+		printk(KERN_WARNING "%s not supported\n", __func__);
+		return -EINVAL;
+	}
+
+	return bridge->master_get(image, enabled, vme_base, size, aspace,
+		cycle, dwidth);
+}
+EXPORT_SYMBOL(vme_master_get);
+
+/**
+ * vme_master_write - Read data from VME space into a buffer.
+ * @resource: Pointer to VME master resource.
+ * @buf: Pointer to buffer where data should be transferred.
+ * @count: Number of bytes to transfer.
+ * @offset: Offset into VME master window at which to start transfer.
+ *
+ * Perform read of count bytes of data from location on VME bus which maps into
+ * the VME master window at offset to buf.
+ *
+ * Return: Number of bytes read, -EINVAL if resource is not a VME master
+ *         resource or read operation is not supported. -EFAULT returned if
+ *         invalid offset is provided. Hardware specific errors may also be
+ *         returned.
+ */
+ssize_t vme_master_read(struct vme_resource *resource, void *buf, size_t count,
+	loff_t offset)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_master_resource *image;
+	size_t length;
+
+	if (!bridge->master_read) {
+		printk(KERN_WARNING "Reading from resource not supported\n");
+		return -EINVAL;
+	}
+
+	if (resource->type != VME_MASTER) {
+		printk(KERN_ERR "Not a master resource\n");
+		return -EINVAL;
+	}
+
+	image = list_entry(resource->entry, struct vme_master_resource, list);
+
+	length = vme_get_size(resource);
+
+	if (offset > length) {
+		printk(KERN_WARNING "Invalid Offset\n");
+		return -EFAULT;
+	}
+
+	if ((offset + count) > length)
+		count = length - offset;
+
+	return bridge->master_read(image, buf, count, offset);
+
+}
+EXPORT_SYMBOL(vme_master_read);
+
+/**
+ * vme_master_write - Write data out to VME space from a buffer.
+ * @resource: Pointer to VME master resource.
+ * @buf: Pointer to buffer holding data to transfer.
+ * @count: Number of bytes to transfer.
+ * @offset: Offset into VME master window at which to start transfer.
+ *
+ * Perform write of count bytes of data from buf to location on VME bus which
+ * maps into the VME master window at offset.
+ *
+ * Return: Number of bytes written, -EINVAL if resource is not a VME master
+ *         resource or write operation is not supported. -EFAULT returned if
+ *         invalid offset is provided. Hardware specific errors may also be
+ *         returned.
+ */
+ssize_t vme_master_write(struct vme_resource *resource, void *buf,
+	size_t count, loff_t offset)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_master_resource *image;
+	size_t length;
+
+	if (!bridge->master_write) {
+		printk(KERN_WARNING "Writing to resource not supported\n");
+		return -EINVAL;
+	}
+
+	if (resource->type != VME_MASTER) {
+		printk(KERN_ERR "Not a master resource\n");
+		return -EINVAL;
+	}
+
+	image = list_entry(resource->entry, struct vme_master_resource, list);
+
+	length = vme_get_size(resource);
+
+	if (offset > length) {
+		printk(KERN_WARNING "Invalid Offset\n");
+		return -EFAULT;
+	}
+
+	if ((offset + count) > length)
+		count = length - offset;
+
+	return bridge->master_write(image, buf, count, offset);
+}
+EXPORT_SYMBOL(vme_master_write);
+
+/**
+ * vme_master_rmw - Perform read-modify-write cycle.
+ * @resource: Pointer to VME master resource.
+ * @mask: Bits to be compared and swapped in operation.
+ * @compare: Bits to be compared with data read from offset.
+ * @swap: Bits to be swapped in data read from offset.
+ * @offset: Offset into VME master window at which to perform operation.
+ *
+ * Perform read-modify-write cycle on provided location:
+ * - Location on VME bus is read.
+ * - Bits selected by mask are compared with compare.
+ * - Where a selected bit matches that in compare and are selected in swap,
+ * the bit is swapped.
+ * - Result written back to location on VME bus.
+ *
+ * Return: Bytes written on success, -EINVAL if resource is not a VME master
+ *         resource or RMW operation is not supported. Hardware specific
+ *         errors may also be returned.
+ */
+unsigned int vme_master_rmw(struct vme_resource *resource, unsigned int mask,
+	unsigned int compare, unsigned int swap, loff_t offset)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_master_resource *image;
+
+	if (!bridge->master_rmw) {
+		printk(KERN_WARNING "Writing to resource not supported\n");
+		return -EINVAL;
+	}
+
+	if (resource->type != VME_MASTER) {
+		printk(KERN_ERR "Not a master resource\n");
+		return -EINVAL;
+	}
+
+	image = list_entry(resource->entry, struct vme_master_resource, list);
+
+	return bridge->master_rmw(image, mask, compare, swap, offset);
+}
+EXPORT_SYMBOL(vme_master_rmw);
+
+/**
+ * vme_master_mmap - Mmap region of VME master window.
+ * @resource: Pointer to VME master resource.
+ * @vma: Pointer to definition of user mapping.
+ *
+ * Memory map a region of the VME master window into user space.
+ *
+ * Return: Zero on success, -EINVAL if resource is not a VME master
+ *         resource or -EFAULT if map exceeds window size. Other generic mmap
+ *         errors may also be returned.
+ */
+int vme_master_mmap(struct vme_resource *resource, struct vm_area_struct *vma)
+{
+	struct vme_master_resource *image;
+	phys_addr_t phys_addr;
+	unsigned long vma_size;
+
+	if (resource->type != VME_MASTER) {
+		pr_err("Not a master resource\n");
+		return -EINVAL;
+	}
+
+	image = list_entry(resource->entry, struct vme_master_resource, list);
+	phys_addr = image->bus_resource.start + (vma->vm_pgoff << PAGE_SHIFT);
+	vma_size = vma->vm_end - vma->vm_start;
+
+	if (phys_addr + vma_size > image->bus_resource.end + 1) {
+		pr_err("Map size cannot exceed the window size\n");
+		return -EFAULT;
+	}
+
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	return vm_iomap_memory(vma, phys_addr, vma->vm_end - vma->vm_start);
+}
+EXPORT_SYMBOL(vme_master_mmap);
+
+/**
+ * vme_master_free - Free VME master window
+ * @resource: Pointer to VME master resource.
+ *
+ * Free the provided master resource so that it may be reallocated.
+ */
+void vme_master_free(struct vme_resource *resource)
+{
+	struct vme_master_resource *master_image;
+
+	if (resource->type != VME_MASTER) {
+		printk(KERN_ERR "Not a master resource\n");
+		return;
+	}
+
+	master_image = list_entry(resource->entry, struct vme_master_resource,
+		list);
+	if (!master_image) {
+		printk(KERN_ERR "Can't find master resource\n");
+		return;
+	}
+
+	/* Unlock image */
+	spin_lock(&master_image->lock);
+	if (master_image->locked == 0)
+		printk(KERN_ERR "Image is already free\n");
+
+	master_image->locked = 0;
+	spin_unlock(&master_image->lock);
+
+	/* Free up resource memory */
+	kfree(resource);
+}
+EXPORT_SYMBOL(vme_master_free);
+
+/**
+ * vme_dma_request - Request a DMA controller.
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ * @route: Required src/destination combination.
+ *
+ * Request a VME DMA controller with capability to perform transfers bewteen
+ * requested source/destination combination.
+ *
+ * Return: Pointer to VME DMA resource on success, NULL on failure.
+ */
+struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route)
+{
+	struct vme_bridge *bridge;
+	struct list_head *dma_pos = NULL;
+	struct vme_dma_resource *allocated_ctrlr = NULL;
+	struct vme_dma_resource *dma_ctrlr = NULL;
+	struct vme_resource *resource = NULL;
+
+	/* XXX Not checking resource attributes */
+	printk(KERN_ERR "No VME resource Attribute tests done\n");
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		printk(KERN_ERR "Can't find VME bus\n");
+		goto err_bus;
+	}
+
+	/* Loop through DMA resources */
+	list_for_each(dma_pos, &bridge->dma_resources) {
+		dma_ctrlr = list_entry(dma_pos,
+			struct vme_dma_resource, list);
+		if (!dma_ctrlr) {
+			printk(KERN_ERR "Registered NULL DMA resource\n");
+			continue;
+		}
+
+		/* Find an unlocked and compatible controller */
+		mutex_lock(&dma_ctrlr->mtx);
+		if (((dma_ctrlr->route_attr & route) == route) &&
+			(dma_ctrlr->locked == 0)) {
+
+			dma_ctrlr->locked = 1;
+			mutex_unlock(&dma_ctrlr->mtx);
+			allocated_ctrlr = dma_ctrlr;
+			break;
+		}
+		mutex_unlock(&dma_ctrlr->mtx);
+	}
+
+	/* Check to see if we found a resource */
+	if (!allocated_ctrlr)
+		goto err_ctrlr;
+
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
+		goto err_alloc;
+
+	resource->type = VME_DMA;
+	resource->entry = &allocated_ctrlr->list;
+
+	return resource;
+
+err_alloc:
+	/* Unlock image */
+	mutex_lock(&dma_ctrlr->mtx);
+	dma_ctrlr->locked = 0;
+	mutex_unlock(&dma_ctrlr->mtx);
+err_ctrlr:
+err_bus:
+	return NULL;
+}
+EXPORT_SYMBOL(vme_dma_request);
+
+/**
+ * vme_new_dma_list - Create new VME DMA list.
+ * @resource: Pointer to VME DMA resource.
+ *
+ * Create a new VME DMA list. It is the responsibility of the user to free
+ * the list once it is no longer required with vme_dma_list_free().
+ *
+ * Return: Pointer to new VME DMA list, NULL on allocation failure or invalid
+ *         VME DMA resource.
+ */
+struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource)
+{
+	struct vme_dma_list *dma_list;
+
+	if (resource->type != VME_DMA) {
+		printk(KERN_ERR "Not a DMA resource\n");
+		return NULL;
+	}
+
+	dma_list = kmalloc(sizeof(*dma_list), GFP_KERNEL);
+	if (!dma_list)
+		return NULL;
+
+	INIT_LIST_HEAD(&dma_list->entries);
+	dma_list->parent = list_entry(resource->entry,
+				      struct vme_dma_resource,
+				      list);
+	mutex_init(&dma_list->mtx);
+
+	return dma_list;
+}
+EXPORT_SYMBOL(vme_new_dma_list);
+
+/**
+ * vme_dma_pattern_attribute - Create "Pattern" type VME DMA list attribute.
+ * @pattern: Value to use used as pattern
+ * @type: Type of pattern to be written.
+ *
+ * Create VME DMA list attribute for pattern generation. It is the
+ * responsibility of the user to free used attributes using
+ * vme_dma_free_attribute().
+ *
+ * Return: Pointer to VME DMA attribute, NULL on failure.
+ */
+struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type)
+{
+	struct vme_dma_attr *attributes;
+	struct vme_dma_pattern *pattern_attr;
+
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
+		goto err_attr;
+
+	pattern_attr = kmalloc(sizeof(*pattern_attr), GFP_KERNEL);
+	if (!pattern_attr)
+		goto err_pat;
+
+	attributes->type = VME_DMA_PATTERN;
+	attributes->private = (void *)pattern_attr;
+
+	pattern_attr->pattern = pattern;
+	pattern_attr->type = type;
+
+	return attributes;
+
+err_pat:
+	kfree(attributes);
+err_attr:
+	return NULL;
+}
+EXPORT_SYMBOL(vme_dma_pattern_attribute);
+
+/**
+ * vme_dma_pci_attribute - Create "PCI" type VME DMA list attribute.
+ * @address: PCI base address for DMA transfer.
+ *
+ * Create VME DMA list attribute pointing to a location on PCI for DMA
+ * transfers. It is the responsibility of the user to free used attributes
+ * using vme_dma_free_attribute().
+ *
+ * Return: Pointer to VME DMA attribute, NULL on failure.
+ */
+struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address)
+{
+	struct vme_dma_attr *attributes;
+	struct vme_dma_pci *pci_attr;
+
+	/* XXX Run some sanity checks here */
+
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
+		goto err_attr;
+
+	pci_attr = kmalloc(sizeof(*pci_attr), GFP_KERNEL);
+	if (!pci_attr)
+		goto err_pci;
+
+	attributes->type = VME_DMA_PCI;
+	attributes->private = (void *)pci_attr;
+
+	pci_attr->address = address;
+
+	return attributes;
+
+err_pci:
+	kfree(attributes);
+err_attr:
+	return NULL;
+}
+EXPORT_SYMBOL(vme_dma_pci_attribute);
+
+/**
+ * vme_dma_vme_attribute - Create "VME" type VME DMA list attribute.
+ * @address: VME base address for DMA transfer.
+ * @aspace: VME address space to use for DMA transfer.
+ * @cycle: VME bus cycle to use for DMA transfer.
+ * @dwidth: VME data width to use for DMA transfer.
+ *
+ * Create VME DMA list attribute pointing to a location on the VME bus for DMA
+ * transfers. It is the responsibility of the user to free used attributes
+ * using vme_dma_free_attribute().
+ *
+ * Return: Pointer to VME DMA attribute, NULL on failure.
+ */
+struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address,
+	u32 aspace, u32 cycle, u32 dwidth)
+{
+	struct vme_dma_attr *attributes;
+	struct vme_dma_vme *vme_attr;
+
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
+		goto err_attr;
+
+	vme_attr = kmalloc(sizeof(*vme_attr), GFP_KERNEL);
+	if (!vme_attr)
+		goto err_vme;
+
+	attributes->type = VME_DMA_VME;
+	attributes->private = (void *)vme_attr;
+
+	vme_attr->address = address;
+	vme_attr->aspace = aspace;
+	vme_attr->cycle = cycle;
+	vme_attr->dwidth = dwidth;
+
+	return attributes;
+
+err_vme:
+	kfree(attributes);
+err_attr:
+	return NULL;
+}
+EXPORT_SYMBOL(vme_dma_vme_attribute);
+
+/**
+ * vme_dma_free_attribute - Free DMA list attribute.
+ * @attributes: Pointer to DMA list attribute.
+ *
+ * Free VME DMA list attribute. VME DMA list attributes can be safely freed
+ * once vme_dma_list_add() has returned.
+ */
+void vme_dma_free_attribute(struct vme_dma_attr *attributes)
+{
+	kfree(attributes->private);
+	kfree(attributes);
+}
+EXPORT_SYMBOL(vme_dma_free_attribute);
+
+/**
+ * vme_dma_list_add - Add enty to a VME DMA list.
+ * @list: Pointer to VME list.
+ * @src: Pointer to DMA list attribute to use as source.
+ * @dest: Pointer to DMA list attribute to use as destination.
+ * @count: Number of bytes to transfer.
+ *
+ * Add an entry to the provided VME DMA list. Entry requires pointers to source
+ * and destination DMA attributes and a count.
+ *
+ * Please note, the attributes supported as source and destinations for
+ * transfers are hardware dependent.
+ *
+ * Return: Zero on success, -EINVAL if operation is not supported on this
+ *         device or if the link list has already been submitted for execution.
+ *         Hardware specific errors also possible.
+ */
+int vme_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
+	struct vme_dma_attr *dest, size_t count)
+{
+	struct vme_bridge *bridge = list->parent->parent;
+	int retval;
+
+	if (!bridge->dma_list_add) {
+		printk(KERN_WARNING "Link List DMA generation not supported\n");
+		return -EINVAL;
+	}
+
+	if (!mutex_trylock(&list->mtx)) {
+		printk(KERN_ERR "Link List already submitted\n");
+		return -EINVAL;
+	}
+
+	retval = bridge->dma_list_add(list, src, dest, count);
+
+	mutex_unlock(&list->mtx);
+
+	return retval;
+}
+EXPORT_SYMBOL(vme_dma_list_add);
+
+/**
+ * vme_dma_list_exec - Queue a VME DMA list for execution.
+ * @list: Pointer to VME list.
+ *
+ * Queue the provided VME DMA list for execution. The call will return once the
+ * list has been executed.
+ *
+ * Return: Zero on success, -EINVAL if operation is not supported on this
+ *         device. Hardware specific errors also possible.
+ */
+int vme_dma_list_exec(struct vme_dma_list *list)
+{
+	struct vme_bridge *bridge = list->parent->parent;
+	int retval;
+
+	if (!bridge->dma_list_exec) {
+		printk(KERN_ERR "Link List DMA execution not supported\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&list->mtx);
+
+	retval = bridge->dma_list_exec(list);
+
+	mutex_unlock(&list->mtx);
+
+	return retval;
+}
+EXPORT_SYMBOL(vme_dma_list_exec);
+
+/**
+ * vme_dma_list_free - Free a VME DMA list.
+ * @list: Pointer to VME list.
+ *
+ * Free the provided DMA list and all its entries.
+ *
+ * Return: Zero on success, -EINVAL on invalid VME resource, -EBUSY if resource
+ *         is still in use. Hardware specific errors also possible.
+ */
+int vme_dma_list_free(struct vme_dma_list *list)
+{
+	struct vme_bridge *bridge = list->parent->parent;
+	int retval;
+
+	if (!bridge->dma_list_empty) {
+		printk(KERN_WARNING "Emptying of Link Lists not supported\n");
+		return -EINVAL;
+	}
+
+	if (!mutex_trylock(&list->mtx)) {
+		printk(KERN_ERR "Link List in use\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Empty out all of the entries from the DMA list. We need to go to the
+	 * low level driver as DMA entries are driver specific.
+	 */
+	retval = bridge->dma_list_empty(list);
+	if (retval) {
+		printk(KERN_ERR "Unable to empty link-list entries\n");
+		mutex_unlock(&list->mtx);
+		return retval;
+	}
+	mutex_unlock(&list->mtx);
+	kfree(list);
+
+	return retval;
+}
+EXPORT_SYMBOL(vme_dma_list_free);
+
+/**
+ * vme_dma_free - Free a VME DMA resource.
+ * @resource: Pointer to VME DMA resource.
+ *
+ * Free the provided DMA resource so that it may be reallocated.
+ *
+ * Return: Zero on success, -EINVAL on invalid VME resource, -EBUSY if resource
+ *         is still active.
+ */
+int vme_dma_free(struct vme_resource *resource)
+{
+	struct vme_dma_resource *ctrlr;
+
+	if (resource->type != VME_DMA) {
+		printk(KERN_ERR "Not a DMA resource\n");
+		return -EINVAL;
+	}
+
+	ctrlr = list_entry(resource->entry, struct vme_dma_resource, list);
+
+	if (!mutex_trylock(&ctrlr->mtx)) {
+		printk(KERN_ERR "Resource busy, can't free\n");
+		return -EBUSY;
+	}
+
+	if (!(list_empty(&ctrlr->pending) && list_empty(&ctrlr->running))) {
+		printk(KERN_WARNING "Resource still processing transfers\n");
+		mutex_unlock(&ctrlr->mtx);
+		return -EBUSY;
+	}
+
+	ctrlr->locked = 0;
+
+	mutex_unlock(&ctrlr->mtx);
+
+	kfree(resource);
+
+	return 0;
+}
+EXPORT_SYMBOL(vme_dma_free);
+
+void vme_bus_error_handler(struct vme_bridge *bridge,
+			   unsigned long long address, int am)
+{
+	struct list_head *handler_pos = NULL;
+	struct vme_error_handler *handler;
+	int handler_triggered = 0;
+	u32 aspace = vme_get_aspace(am);
+
+	list_for_each(handler_pos, &bridge->vme_error_handlers) {
+		handler = list_entry(handler_pos, struct vme_error_handler,
+				     list);
+		if ((aspace == handler->aspace) &&
+		    (address >= handler->start) &&
+		    (address < handler->end)) {
+			if (!handler->num_errors)
+				handler->first_error = address;
+			if (handler->num_errors != UINT_MAX)
+				handler->num_errors++;
+			handler_triggered = 1;
+		}
+	}
+
+	if (!handler_triggered)
+		dev_err(bridge->parent,
+			"Unhandled VME access error at address 0x%llx\n",
+			address);
+}
+EXPORT_SYMBOL(vme_bus_error_handler);
+
+struct vme_error_handler *vme_register_error_handler(
+	struct vme_bridge *bridge, u32 aspace,
+	unsigned long long address, size_t len)
+{
+	struct vme_error_handler *handler;
+
+	handler = kmalloc(sizeof(*handler), GFP_ATOMIC);
+	if (!handler)
+		return NULL;
+
+	handler->aspace = aspace;
+	handler->start = address;
+	handler->end = address + len;
+	handler->num_errors = 0;
+	handler->first_error = 0;
+	list_add_tail(&handler->list, &bridge->vme_error_handlers);
+
+	return handler;
+}
+EXPORT_SYMBOL(vme_register_error_handler);
+
+void vme_unregister_error_handler(struct vme_error_handler *handler)
+{
+	list_del(&handler->list);
+	kfree(handler);
+}
+EXPORT_SYMBOL(vme_unregister_error_handler);
+
+void vme_irq_handler(struct vme_bridge *bridge, int level, int statid)
+{
+	void (*call)(int, int, void *);
+	void *priv_data;
+
+	call = bridge->irq[level - 1].callback[statid].func;
+	priv_data = bridge->irq[level - 1].callback[statid].priv_data;
+	if (call)
+		call(level, statid, priv_data);
+	else
+		printk(KERN_WARNING "Spurious VME interrupt, level:%x, vector:%x\n",
+		       level, statid);
+}
+EXPORT_SYMBOL(vme_irq_handler);
+
+/**
+ * vme_irq_request - Request a specific VME interrupt.
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ * @level: Interrupt priority being requested.
+ * @statid: Interrupt vector being requested.
+ * @callback: Pointer to callback function called when VME interrupt/vector
+ *            received.
+ * @priv_data: Generic pointer that will be passed to the callback function.
+ *
+ * Request callback to be attached as a handler for VME interrupts with provided
+ * level and statid.
+ *
+ * Return: Zero on success, -EINVAL on invalid vme device, level or if the
+ *         function is not supported, -EBUSY if the level/statid combination is
+ *         already in use. Hardware specific errors also possible.
+ */
+int vme_irq_request(struct vme_dev *vdev, int level, int statid,
+	void (*callback)(int, int, void *),
+	void *priv_data)
+{
+	struct vme_bridge *bridge;
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		printk(KERN_ERR "Can't find VME bus\n");
+		return -EINVAL;
+	}
+
+	if ((level < 1) || (level > 7)) {
+		printk(KERN_ERR "Invalid interrupt level\n");
+		return -EINVAL;
+	}
+
+	if (!bridge->irq_set) {
+		printk(KERN_ERR "Configuring interrupts not supported\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&bridge->irq_mtx);
+
+	if (bridge->irq[level - 1].callback[statid].func) {
+		mutex_unlock(&bridge->irq_mtx);
+		printk(KERN_WARNING "VME Interrupt already taken\n");
+		return -EBUSY;
+	}
+
+	bridge->irq[level - 1].count++;
+	bridge->irq[level - 1].callback[statid].priv_data = priv_data;
+	bridge->irq[level - 1].callback[statid].func = callback;
+
+	/* Enable IRQ level */
+	bridge->irq_set(bridge, level, 1, 1);
+
+	mutex_unlock(&bridge->irq_mtx);
+
+	return 0;
+}
+EXPORT_SYMBOL(vme_irq_request);
+
+/**
+ * vme_irq_free - Free a VME interrupt.
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ * @level: Interrupt priority of interrupt being freed.
+ * @statid: Interrupt vector of interrupt being freed.
+ *
+ * Remove previously attached callback from VME interrupt priority/vector.
+ */
+void vme_irq_free(struct vme_dev *vdev, int level, int statid)
+{
+	struct vme_bridge *bridge;
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		printk(KERN_ERR "Can't find VME bus\n");
+		return;
+	}
+
+	if ((level < 1) || (level > 7)) {
+		printk(KERN_ERR "Invalid interrupt level\n");
+		return;
+	}
+
+	if (!bridge->irq_set) {
+		printk(KERN_ERR "Configuring interrupts not supported\n");
+		return;
+	}
+
+	mutex_lock(&bridge->irq_mtx);
+
+	bridge->irq[level - 1].count--;
+
+	/* Disable IRQ level if no more interrupts attached at this level*/
+	if (bridge->irq[level - 1].count == 0)
+		bridge->irq_set(bridge, level, 0, 1);
+
+	bridge->irq[level - 1].callback[statid].func = NULL;
+	bridge->irq[level - 1].callback[statid].priv_data = NULL;
+
+	mutex_unlock(&bridge->irq_mtx);
+}
+EXPORT_SYMBOL(vme_irq_free);
+
+/**
+ * vme_irq_generate - Generate VME interrupt.
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ * @level: Interrupt priority at which to assert the interrupt.
+ * @statid: Interrupt vector to associate with the interrupt.
+ *
+ * Generate a VME interrupt of the provided level and with the provided
+ * statid.
+ *
+ * Return: Zero on success, -EINVAL on invalid vme device, level or if the
+ *         function is not supported. Hardware specific errors also possible.
+ */
+int vme_irq_generate(struct vme_dev *vdev, int level, int statid)
+{
+	struct vme_bridge *bridge;
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		printk(KERN_ERR "Can't find VME bus\n");
+		return -EINVAL;
+	}
+
+	if ((level < 1) || (level > 7)) {
+		printk(KERN_WARNING "Invalid interrupt level\n");
+		return -EINVAL;
+	}
+
+	if (!bridge->irq_generate) {
+		printk(KERN_WARNING "Interrupt generation not supported\n");
+		return -EINVAL;
+	}
+
+	return bridge->irq_generate(bridge, level, statid);
+}
+EXPORT_SYMBOL(vme_irq_generate);
+
+/**
+ * vme_lm_request - Request a VME location monitor
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ *
+ * Allocate a location monitor resource to the driver. A location monitor
+ * allows the driver to monitor accesses to a contiguous number of
+ * addresses on the VME bus.
+ *
+ * Return: Pointer to a VME resource on success or NULL on failure.
+ */
+struct vme_resource *vme_lm_request(struct vme_dev *vdev)
+{
+	struct vme_bridge *bridge;
+	struct list_head *lm_pos = NULL;
+	struct vme_lm_resource *allocated_lm = NULL;
+	struct vme_lm_resource *lm = NULL;
+	struct vme_resource *resource = NULL;
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		printk(KERN_ERR "Can't find VME bus\n");
+		goto err_bus;
+	}
+
+	/* Loop through LM resources */
+	list_for_each(lm_pos, &bridge->lm_resources) {
+		lm = list_entry(lm_pos,
+			struct vme_lm_resource, list);
+		if (!lm) {
+			printk(KERN_ERR "Registered NULL Location Monitor resource\n");
+			continue;
+		}
+
+		/* Find an unlocked controller */
+		mutex_lock(&lm->mtx);
+		if (lm->locked == 0) {
+			lm->locked = 1;
+			mutex_unlock(&lm->mtx);
+			allocated_lm = lm;
+			break;
+		}
+		mutex_unlock(&lm->mtx);
+	}
+
+	/* Check to see if we found a resource */
+	if (!allocated_lm)
+		goto err_lm;
+
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
+		goto err_alloc;
+
+	resource->type = VME_LM;
+	resource->entry = &allocated_lm->list;
+
+	return resource;
+
+err_alloc:
+	/* Unlock image */
+	mutex_lock(&lm->mtx);
+	lm->locked = 0;
+	mutex_unlock(&lm->mtx);
+err_lm:
+err_bus:
+	return NULL;
+}
+EXPORT_SYMBOL(vme_lm_request);
+
+/**
+ * vme_lm_count - Determine number of VME Addresses monitored
+ * @resource: Pointer to VME location monitor resource.
+ *
+ * The number of contiguous addresses monitored is hardware dependent.
+ * Return the number of contiguous addresses monitored by the
+ * location monitor.
+ *
+ * Return: Count of addresses monitored or -EINVAL when provided with an
+ *	   invalid location monitor resource.
+ */
+int vme_lm_count(struct vme_resource *resource)
+{
+	struct vme_lm_resource *lm;
+
+	if (resource->type != VME_LM) {
+		printk(KERN_ERR "Not a Location Monitor resource\n");
+		return -EINVAL;
+	}
+
+	lm = list_entry(resource->entry, struct vme_lm_resource, list);
+
+	return lm->monitors;
+}
+EXPORT_SYMBOL(vme_lm_count);
+
+/**
+ * vme_lm_set - Configure location monitor
+ * @resource: Pointer to VME location monitor resource.
+ * @lm_base: Base address to monitor.
+ * @aspace: VME address space to monitor.
+ * @cycle: VME bus cycle type to monitor.
+ *
+ * Set the base address, address space and cycle type of accesses to be
+ * monitored by the location monitor.
+ *
+ * Return: Zero on success, -EINVAL when provided with an invalid location
+ *	   monitor resource or function is not supported. Hardware specific
+ *	   errors may also be returned.
+ */
+int vme_lm_set(struct vme_resource *resource, unsigned long long lm_base,
+	u32 aspace, u32 cycle)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_lm_resource *lm;
+
+	if (resource->type != VME_LM) {
+		printk(KERN_ERR "Not a Location Monitor resource\n");
+		return -EINVAL;
+	}
+
+	lm = list_entry(resource->entry, struct vme_lm_resource, list);
+
+	if (!bridge->lm_set) {
+		printk(KERN_ERR "vme_lm_set not supported\n");
+		return -EINVAL;
+	}
+
+	return bridge->lm_set(lm, lm_base, aspace, cycle);
+}
+EXPORT_SYMBOL(vme_lm_set);
+
+/**
+ * vme_lm_get - Retrieve location monitor settings
+ * @resource: Pointer to VME location monitor resource.
+ * @lm_base: Pointer used to output the base address monitored.
+ * @aspace: Pointer used to output the address space monitored.
+ * @cycle: Pointer used to output the VME bus cycle type monitored.
+ *
+ * Retrieve the base address, address space and cycle type of accesses to
+ * be monitored by the location monitor.
+ *
+ * Return: Zero on success, -EINVAL when provided with an invalid location
+ *	   monitor resource or function is not supported. Hardware specific
+ *	   errors may also be returned.
+ */
+int vme_lm_get(struct vme_resource *resource, unsigned long long *lm_base,
+	u32 *aspace, u32 *cycle)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_lm_resource *lm;
+
+	if (resource->type != VME_LM) {
+		printk(KERN_ERR "Not a Location Monitor resource\n");
+		return -EINVAL;
+	}
+
+	lm = list_entry(resource->entry, struct vme_lm_resource, list);
+
+	if (!bridge->lm_get) {
+		printk(KERN_ERR "vme_lm_get not supported\n");
+		return -EINVAL;
+	}
+
+	return bridge->lm_get(lm, lm_base, aspace, cycle);
+}
+EXPORT_SYMBOL(vme_lm_get);
+
+/**
+ * vme_lm_attach - Provide callback for location monitor address
+ * @resource: Pointer to VME location monitor resource.
+ * @monitor: Offset to which callback should be attached.
+ * @callback: Pointer to callback function called when triggered.
+ * @data: Generic pointer that will be passed to the callback function.
+ *
+ * Attach a callback to the specificed offset into the location monitors
+ * monitored addresses. A generic pointer is provided to allow data to be
+ * passed to the callback when called.
+ *
+ * Return: Zero on success, -EINVAL when provided with an invalid location
+ *	   monitor resource or function is not supported. Hardware specific
+ *	   errors may also be returned.
+ */
+int vme_lm_attach(struct vme_resource *resource, int monitor,
+	void (*callback)(void *), void *data)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_lm_resource *lm;
+
+	if (resource->type != VME_LM) {
+		printk(KERN_ERR "Not a Location Monitor resource\n");
+		return -EINVAL;
+	}
+
+	lm = list_entry(resource->entry, struct vme_lm_resource, list);
+
+	if (!bridge->lm_attach) {
+		printk(KERN_ERR "vme_lm_attach not supported\n");
+		return -EINVAL;
+	}
+
+	return bridge->lm_attach(lm, monitor, callback, data);
+}
+EXPORT_SYMBOL(vme_lm_attach);
+
+/**
+ * vme_lm_detach - Remove callback for location monitor address
+ * @resource: Pointer to VME location monitor resource.
+ * @monitor: Offset to which callback should be removed.
+ *
+ * Remove the callback associated with the specificed offset into the
+ * location monitors monitored addresses.
+ *
+ * Return: Zero on success, -EINVAL when provided with an invalid location
+ *	   monitor resource or function is not supported. Hardware specific
+ *	   errors may also be returned.
+ */
+int vme_lm_detach(struct vme_resource *resource, int monitor)
+{
+	struct vme_bridge *bridge = find_bridge(resource);
+	struct vme_lm_resource *lm;
+
+	if (resource->type != VME_LM) {
+		printk(KERN_ERR "Not a Location Monitor resource\n");
+		return -EINVAL;
+	}
+
+	lm = list_entry(resource->entry, struct vme_lm_resource, list);
+
+	if (!bridge->lm_detach) {
+		printk(KERN_ERR "vme_lm_detach not supported\n");
+		return -EINVAL;
+	}
+
+	return bridge->lm_detach(lm, monitor);
+}
+EXPORT_SYMBOL(vme_lm_detach);
+
+/**
+ * vme_lm_free - Free allocated VME location monitor
+ * @resource: Pointer to VME location monitor resource.
+ *
+ * Free allocation of a VME location monitor.
+ *
+ * WARNING: This function currently expects that any callbacks that have
+ *          been attached to the location monitor have been removed.
+ *
+ * Return: Zero on success, -EINVAL when provided with an invalid location
+ *	   monitor resource.
+ */
+void vme_lm_free(struct vme_resource *resource)
+{
+	struct vme_lm_resource *lm;
+
+	if (resource->type != VME_LM) {
+		printk(KERN_ERR "Not a Location Monitor resource\n");
+		return;
+	}
+
+	lm = list_entry(resource->entry, struct vme_lm_resource, list);
+
+	mutex_lock(&lm->mtx);
+
+	/* XXX
+	 * Check to see that there aren't any callbacks still attached, if
+	 * there are we should probably be detaching them!
+	 */
+
+	lm->locked = 0;
+
+	mutex_unlock(&lm->mtx);
+
+	kfree(resource);
+}
+EXPORT_SYMBOL(vme_lm_free);
+
+/**
+ * vme_slot_num - Retrieve slot ID
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ *
+ * Retrieve the slot ID associated with the provided VME device.
+ *
+ * Return: The slot ID on success, -EINVAL if VME bridge cannot be determined
+ *         or the function is not supported. Hardware specific errors may also
+ *         be returned.
+ */
+int vme_slot_num(struct vme_dev *vdev)
+{
+	struct vme_bridge *bridge;
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		printk(KERN_ERR "Can't find VME bus\n");
+		return -EINVAL;
+	}
+
+	if (!bridge->slot_get) {
+		printk(KERN_WARNING "vme_slot_num not supported\n");
+		return -EINVAL;
+	}
+
+	return bridge->slot_get(bridge);
+}
+EXPORT_SYMBOL(vme_slot_num);
+
+/**
+ * vme_bus_num - Retrieve bus number
+ * @vdev: Pointer to VME device struct vme_dev assigned to driver instance.
+ *
+ * Retrieve the bus enumeration associated with the provided VME device.
+ *
+ * Return: The bus number on success, -EINVAL if VME bridge cannot be
+ *         determined.
+ */
+int vme_bus_num(struct vme_dev *vdev)
+{
+	struct vme_bridge *bridge;
+
+	bridge = vdev->bridge;
+	if (!bridge) {
+		pr_err("Can't find VME bus\n");
+		return -EINVAL;
+	}
+
+	return bridge->num;
+}
+EXPORT_SYMBOL(vme_bus_num);
+
+/* - Bridge Registration --------------------------------------------------- */
+
+static void vme_dev_release(struct device *dev)
+{
+	kfree(dev_to_vme_dev(dev));
+}
+
+/* Common bridge initialization */
+struct vme_bridge *vme_init_bridge(struct vme_bridge *bridge)
+{
+	INIT_LIST_HEAD(&bridge->vme_error_handlers);
+	INIT_LIST_HEAD(&bridge->master_resources);
+	INIT_LIST_HEAD(&bridge->slave_resources);
+	INIT_LIST_HEAD(&bridge->dma_resources);
+	INIT_LIST_HEAD(&bridge->lm_resources);
+	mutex_init(&bridge->irq_mtx);
+
+	return bridge;
+}
+EXPORT_SYMBOL(vme_init_bridge);
+
+int vme_register_bridge(struct vme_bridge *bridge)
+{
+	int i;
+	int ret = -1;
+
+	mutex_lock(&vme_buses_lock);
+	for (i = 0; i < sizeof(vme_bus_numbers) * 8; i++) {
+		if ((vme_bus_numbers & (1 << i)) == 0) {
+			vme_bus_numbers |= (1 << i);
+			bridge->num = i;
+			INIT_LIST_HEAD(&bridge->devices);
+			list_add_tail(&bridge->bus_list, &vme_bus_list);
+			ret = 0;
+			break;
+		}
+	}
+	mutex_unlock(&vme_buses_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(vme_register_bridge);
+
+void vme_unregister_bridge(struct vme_bridge *bridge)
+{
+	struct vme_dev *vdev;
+	struct vme_dev *tmp;
+
+	mutex_lock(&vme_buses_lock);
+	vme_bus_numbers &= ~(1 << bridge->num);
+	list_for_each_entry_safe(vdev, tmp, &bridge->devices, bridge_list) {
+		list_del(&vdev->drv_list);
+		list_del(&vdev->bridge_list);
+		device_unregister(&vdev->dev);
+	}
+	list_del(&bridge->bus_list);
+	mutex_unlock(&vme_buses_lock);
+}
+EXPORT_SYMBOL(vme_unregister_bridge);
+
+/* - Driver Registration --------------------------------------------------- */
+
+static int __vme_register_driver_bus(struct vme_driver *drv,
+	struct vme_bridge *bridge, unsigned int ndevs)
+{
+	int err;
+	unsigned int i;
+	struct vme_dev *vdev;
+	struct vme_dev *tmp;
+
+	for (i = 0; i < ndevs; i++) {
+		vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+		if (!vdev) {
+			err = -ENOMEM;
+			goto err_devalloc;
+		}
+		vdev->num = i;
+		vdev->bridge = bridge;
+		vdev->dev.platform_data = drv;
+		vdev->dev.release = vme_dev_release;
+		vdev->dev.parent = bridge->parent;
+		vdev->dev.bus = &vme_bus_type;
+		dev_set_name(&vdev->dev, "%s.%u-%u", drv->name, bridge->num,
+			vdev->num);
+
+		err = device_register(&vdev->dev);
+		if (err)
+			goto err_reg;
+
+		if (vdev->dev.platform_data) {
+			list_add_tail(&vdev->drv_list, &drv->devices);
+			list_add_tail(&vdev->bridge_list, &bridge->devices);
+		} else
+			device_unregister(&vdev->dev);
+	}
+	return 0;
+
+err_reg:
+	put_device(&vdev->dev);
+err_devalloc:
+	list_for_each_entry_safe(vdev, tmp, &drv->devices, drv_list) {
+		list_del(&vdev->drv_list);
+		list_del(&vdev->bridge_list);
+		device_unregister(&vdev->dev);
+	}
+	return err;
+}
+
+static int __vme_register_driver(struct vme_driver *drv, unsigned int ndevs)
+{
+	struct vme_bridge *bridge;
+	int err = 0;
+
+	mutex_lock(&vme_buses_lock);
+	list_for_each_entry(bridge, &vme_bus_list, bus_list) {
+		/*
+		 * This cannot cause trouble as we already have vme_buses_lock
+		 * and if the bridge is removed, it will have to go through
+		 * vme_unregister_bridge() to do it (which calls remove() on
+		 * the bridge which in turn tries to acquire vme_buses_lock and
+		 * will have to wait).
+		 */
+		err = __vme_register_driver_bus(drv, bridge, ndevs);
+		if (err)
+			break;
+	}
+	mutex_unlock(&vme_buses_lock);
+	return err;
+}
+
+/**
+ * vme_register_driver - Register a VME driver
+ * @drv: Pointer to VME driver structure to register.
+ * @ndevs: Maximum number of devices to allow to be enumerated.
+ *
+ * Register a VME device driver with the VME subsystem.
+ *
+ * Return: Zero on success, error value on registration failure.
+ */
+int vme_register_driver(struct vme_driver *drv, unsigned int ndevs)
+{
+	int err;
+
+	drv->driver.name = drv->name;
+	drv->driver.bus = &vme_bus_type;
+	INIT_LIST_HEAD(&drv->devices);
+
+	err = driver_register(&drv->driver);
+	if (err)
+		return err;
+
+	err = __vme_register_driver(drv, ndevs);
+	if (err)
+		driver_unregister(&drv->driver);
+
+	return err;
+}
+EXPORT_SYMBOL(vme_register_driver);
+
+/**
+ * vme_unregister_driver - Unregister a VME driver
+ * @drv: Pointer to VME driver structure to unregister.
+ *
+ * Unregister a VME device driver from the VME subsystem.
+ */
+void vme_unregister_driver(struct vme_driver *drv)
+{
+	struct vme_dev *dev, *dev_tmp;
+
+	mutex_lock(&vme_buses_lock);
+	list_for_each_entry_safe(dev, dev_tmp, &drv->devices, drv_list) {
+		list_del(&dev->drv_list);
+		list_del(&dev->bridge_list);
+		device_unregister(&dev->dev);
+	}
+	mutex_unlock(&vme_buses_lock);
+
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(vme_unregister_driver);
+
+/* - Bus Registration ------------------------------------------------------ */
+
+static int vme_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct vme_driver *vme_drv;
+
+	vme_drv = container_of(drv, struct vme_driver, driver);
+
+	if (dev->platform_data == vme_drv) {
+		struct vme_dev *vdev = dev_to_vme_dev(dev);
+
+		if (vme_drv->match && vme_drv->match(vdev))
+			return 1;
+
+		dev->platform_data = NULL;
+	}
+	return 0;
+}
+
+static int vme_bus_probe(struct device *dev)
+{
+	struct vme_driver *driver;
+	struct vme_dev *vdev = dev_to_vme_dev(dev);
+
+	driver = dev->platform_data;
+	if (driver->probe)
+		return driver->probe(vdev);
+
+	return -ENODEV;
+}
+
+static int vme_bus_remove(struct device *dev)
+{
+	struct vme_driver *driver;
+	struct vme_dev *vdev = dev_to_vme_dev(dev);
+
+	driver = dev->platform_data;
+	if (driver->remove)
+		return driver->remove(vdev);
+
+	return -ENODEV;
+}
+
+struct bus_type vme_bus_type = {
+	.name = "vme",
+	.match = vme_bus_match,
+	.probe = vme_bus_probe,
+	.remove = vme_bus_remove,
+};
+EXPORT_SYMBOL(vme_bus_type);
+
+static int __init vme_init(void)
+{
+	return bus_register(&vme_bus_type);
+}
+subsys_initcall(vme_init);
diff --git a/drivers/vme/vme_bridge.h b/drivers/vme/vme_bridge.h
new file mode 100644
index 000000000..42ecf9610
--- /dev/null
+++ b/drivers/vme/vme_bridge.h
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _VME_BRIDGE_H_
+#define _VME_BRIDGE_H_
+
+#include <linux/vme.h>
+
+#define VME_CRCSR_BUF_SIZE (508*1024)
+/*
+ * Resource structures
+ */
+struct vme_master_resource {
+	struct list_head list;
+	struct vme_bridge *parent;
+	/*
+	 * We are likely to need to access the VME bus in interrupt context, so
+	 * protect master routines with a spinlock rather than a mutex.
+	 */
+	spinlock_t lock;
+	int locked;
+	int number;
+	u32 address_attr;
+	u32 cycle_attr;
+	u32 width_attr;
+	struct resource bus_resource;
+	void __iomem *kern_base;
+};
+
+struct vme_slave_resource {
+	struct list_head list;
+	struct vme_bridge *parent;
+	struct mutex mtx;
+	int locked;
+	int number;
+	u32 address_attr;
+	u32 cycle_attr;
+};
+
+struct vme_dma_pattern {
+	u32 pattern;
+	u32 type;
+};
+
+struct vme_dma_pci {
+	dma_addr_t address;
+};
+
+struct vme_dma_vme {
+	unsigned long long address;
+	u32 aspace;
+	u32 cycle;
+	u32 dwidth;
+};
+
+struct vme_dma_list {
+	struct list_head list;
+	struct vme_dma_resource *parent;
+	struct list_head entries;
+	struct mutex mtx;
+};
+
+struct vme_dma_resource {
+	struct list_head list;
+	struct vme_bridge *parent;
+	struct mutex mtx;
+	int locked;
+	int number;
+	struct list_head pending;
+	struct list_head running;
+	u32 route_attr;
+};
+
+struct vme_lm_resource {
+	struct list_head list;
+	struct vme_bridge *parent;
+	struct mutex mtx;
+	int locked;
+	int number;
+	int monitors;
+};
+
+struct vme_error_handler {
+	struct list_head list;
+	unsigned long long start;	/* Beginning of error window */
+	unsigned long long end;		/* End of error window */
+	unsigned long long first_error;	/* Address of the first error */
+	u32 aspace;			/* Address space of error window*/
+	unsigned num_errors;		/* Number of errors */
+};
+
+struct vme_callback {
+	void (*func)(int, int, void*);
+	void *priv_data;
+};
+
+struct vme_irq {
+	int count;
+	struct vme_callback callback[VME_NUM_STATUSID];
+};
+
+/* Allow 16 characters for name (including null character) */
+#define VMENAMSIZ 16
+
+/* This structure stores all the information about one bridge
+ * The structure should be dynamically allocated by the driver and one instance
+ * of the structure should be present for each VME chip present in the system.
+ */
+struct vme_bridge {
+	char name[VMENAMSIZ];
+	int num;
+	struct list_head master_resources;
+	struct list_head slave_resources;
+	struct list_head dma_resources;
+	struct list_head lm_resources;
+
+	/* List for registered errors handlers */
+	struct list_head vme_error_handlers;
+	/* List of devices on this bridge */
+	struct list_head devices;
+
+	/* Bridge Info - XXX Move to private structure? */
+	struct device *parent;	/* Parent device (eg. pdev->dev for PCI) */
+	void *driver_priv;	/* Private pointer for the bridge driver */
+	struct list_head bus_list; /* list of VME buses */
+
+	/* Interrupt callbacks */
+	struct vme_irq irq[7];
+	/* Locking for VME irq callback configuration */
+	struct mutex irq_mtx;
+
+	/* Slave Functions */
+	int (*slave_get) (struct vme_slave_resource *, int *,
+		unsigned long long *, unsigned long long *, dma_addr_t *,
+		u32 *, u32 *);
+	int (*slave_set) (struct vme_slave_resource *, int, unsigned long long,
+		unsigned long long, dma_addr_t, u32, u32);
+
+	/* Master Functions */
+	int (*master_get) (struct vme_master_resource *, int *,
+		unsigned long long *, unsigned long long *, u32 *, u32 *,
+		u32 *);
+	int (*master_set) (struct vme_master_resource *, int,
+		unsigned long long, unsigned long long,  u32, u32, u32);
+	ssize_t (*master_read) (struct vme_master_resource *, void *, size_t,
+		loff_t);
+	ssize_t (*master_write) (struct vme_master_resource *, void *, size_t,
+		loff_t);
+	unsigned int (*master_rmw) (struct vme_master_resource *, unsigned int,
+		unsigned int, unsigned int, loff_t);
+
+	/* DMA Functions */
+	int (*dma_list_add) (struct vme_dma_list *, struct vme_dma_attr *,
+		struct vme_dma_attr *, size_t);
+	int (*dma_list_exec) (struct vme_dma_list *);
+	int (*dma_list_empty) (struct vme_dma_list *);
+
+	/* Interrupt Functions */
+	void (*irq_set) (struct vme_bridge *, int, int, int);
+	int (*irq_generate) (struct vme_bridge *, int, int);
+
+	/* Location monitor functions */
+	int (*lm_set) (struct vme_lm_resource *, unsigned long long, u32, u32);
+	int (*lm_get) (struct vme_lm_resource *, unsigned long long *, u32 *,
+		u32 *);
+	int (*lm_attach)(struct vme_lm_resource *, int,
+			 void (*callback)(void *), void *);
+	int (*lm_detach) (struct vme_lm_resource *, int);
+
+	/* CR/CSR space functions */
+	int (*slot_get) (struct vme_bridge *);
+
+	/* Bridge parent interface */
+	void *(*alloc_consistent)(struct device *dev, size_t size,
+		dma_addr_t *dma);
+	void (*free_consistent)(struct device *dev, size_t size,
+		void *vaddr, dma_addr_t dma);
+};
+
+void vme_bus_error_handler(struct vme_bridge *bridge,
+			   unsigned long long address, int am);
+void vme_irq_handler(struct vme_bridge *, int, int);
+
+struct vme_bridge *vme_init_bridge(struct vme_bridge *);
+int vme_register_bridge(struct vme_bridge *);
+void vme_unregister_bridge(struct vme_bridge *);
+struct vme_error_handler *vme_register_error_handler(
+	struct vme_bridge *bridge, u32 aspace,
+	unsigned long long address, size_t len);
+void vme_unregister_error_handler(struct vme_error_handler *handler);
+
+#endif /* _VME_BRIDGE_H_ */