Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 696 insertions, 0 deletions

diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
new file mode 100644
index 000000000..bf2ec59c1
--- /dev/null
+++ b/drivers/w1/masters/omap_hdq.c
@@ -0,0 +1,696 @@
+/*
+ * drivers/w1/masters/omap_hdq.c
+ *
+ * Copyright (C) 2007,2012 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+
+#include <linux/w1.h>
+
+#define	MOD_NAME	"OMAP_HDQ:"
+
+#define OMAP_HDQ_REVISION			0x00
+#define OMAP_HDQ_TX_DATA			0x04
+#define OMAP_HDQ_RX_DATA			0x08
+#define OMAP_HDQ_CTRL_STATUS			0x0c
+#define OMAP_HDQ_CTRL_STATUS_SINGLE		BIT(7)
+#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK	BIT(6)
+#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE	BIT(5)
+#define OMAP_HDQ_CTRL_STATUS_GO                 BIT(4)
+#define OMAP_HDQ_CTRL_STATUS_PRESENCE		BIT(3)
+#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION	BIT(2)
+#define OMAP_HDQ_CTRL_STATUS_DIR		BIT(1)
+#define OMAP_HDQ_INT_STATUS			0x10
+#define OMAP_HDQ_INT_STATUS_TXCOMPLETE		BIT(2)
+#define OMAP_HDQ_INT_STATUS_RXCOMPLETE		BIT(1)
+#define OMAP_HDQ_INT_STATUS_TIMEOUT		BIT(0)
+
+#define OMAP_HDQ_FLAG_CLEAR			0
+#define OMAP_HDQ_FLAG_SET			1
+#define OMAP_HDQ_TIMEOUT			(HZ/5)
+
+#define OMAP_HDQ_MAX_USER			4
+
+static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue);
+
+static int w1_id;
+module_param(w1_id, int, S_IRUSR);
+MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection in HDQ mode");
+
+struct hdq_data {
+	struct device		*dev;
+	void __iomem		*hdq_base;
+	/* lock read/write/break operations */
+	struct  mutex		hdq_mutex;
+	/* interrupt status and a lock for it */
+	u8			hdq_irqstatus;
+	spinlock_t		hdq_spinlock;
+	/* mode: 0-HDQ 1-W1 */
+	int                     mode;
+
+};
+
+/* HDQ register I/O routines */
+static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
+{
+	return __raw_readl(hdq_data->hdq_base + offset);
+}
+
+static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
+{
+	__raw_writel(val, hdq_data->hdq_base + offset);
+}
+
+static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
+			u8 val, u8 mask)
+{
+	u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask)
+			| (val & mask);
+	__raw_writel(new_val, hdq_data->hdq_base + offset);
+
+	return new_val;
+}
+
+/*
+ * Wait for one or more bits in flag change.
+ * HDQ_FLAG_SET: wait until any bit in the flag is set.
+ * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared.
+ * return 0 on success and -ETIMEDOUT in the case of timeout.
+ */
+static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset,
+		u8 flag, u8 flag_set, u8 *status)
+{
+	int ret = 0;
+	unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
+
+	if (flag_set == OMAP_HDQ_FLAG_CLEAR) {
+		/* wait for the flag clear */
+		while (((*status = hdq_reg_in(hdq_data, offset)) & flag)
+			&& time_before(jiffies, timeout)) {
+			schedule_timeout_uninterruptible(1);
+		}
+		if (*status & flag)
+			ret = -ETIMEDOUT;
+	} else if (flag_set == OMAP_HDQ_FLAG_SET) {
+		/* wait for the flag set */
+		while (!((*status = hdq_reg_in(hdq_data, offset)) & flag)
+			&& time_before(jiffies, timeout)) {
+			schedule_timeout_uninterruptible(1);
+		}
+		if (!(*status & flag))
+			ret = -ETIMEDOUT;
+	} else
+		return -EINVAL;
+
+	return ret;
+}
+
+/* Clear saved irqstatus after using an interrupt */
+static u8 hdq_reset_irqstatus(struct hdq_data *hdq_data, u8 bits)
+{
+	unsigned long irqflags;
+	u8 status;
+
+	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+	status = hdq_data->hdq_irqstatus;
+	/* this is a read-modify-write */
+	hdq_data->hdq_irqstatus &= ~bits;
+	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+
+	return status;
+}
+
+/* write out a byte and fill *status with HDQ_INT_STATUS */
+static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
+{
+	int ret;
+	u8 tmp_status;
+
+	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (ret < 0) {
+		ret = -EINTR;
+		goto rtn;
+	}
+
+	if (hdq_data->hdq_irqstatus)
+		dev_err(hdq_data->dev, "TX irqstatus not cleared (%02x)\n",
+			hdq_data->hdq_irqstatus);
+
+	*status = 0;
+
+	hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val);
+
+	/* set the GO bit */
+	hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO,
+		OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+	/* wait for the TXCOMPLETE bit */
+	ret = wait_event_timeout(hdq_wait_queue,
+		(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_TXCOMPLETE),
+		OMAP_HDQ_TIMEOUT);
+	*status = hdq_reset_irqstatus(hdq_data, OMAP_HDQ_INT_STATUS_TXCOMPLETE);
+	if (ret == 0) {
+		dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* check irqstatus */
+	if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
+		dev_dbg(hdq_data->dev, "timeout waiting for"
+			" TXCOMPLETE/RXCOMPLETE, %x\n", *status);
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* wait for the GO bit return to zero */
+	ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+			OMAP_HDQ_CTRL_STATUS_GO,
+			OMAP_HDQ_FLAG_CLEAR, &tmp_status);
+	if (ret) {
+		dev_dbg(hdq_data->dev, "timeout waiting GO bit"
+			" return to zero, %x\n", tmp_status);
+	}
+
+out:
+	mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+	return ret;
+}
+
+/* HDQ Interrupt service routine */
+static irqreturn_t hdq_isr(int irq, void *_hdq)
+{
+	struct hdq_data *hdq_data = _hdq;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags);
+	hdq_data->hdq_irqstatus |= hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+	spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags);
+	dev_dbg(hdq_data->dev, "hdq_isr: %x\n", hdq_data->hdq_irqstatus);
+
+	if (hdq_data->hdq_irqstatus &
+		(OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE
+		| OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+		/* wake up sleeping process */
+		wake_up(&hdq_wait_queue);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* W1 search callback function  in HDQ mode */
+static void omap_w1_search_bus(void *_hdq, struct w1_master *master_dev,
+		u8 search_type, w1_slave_found_callback slave_found)
+{
+	u64 module_id, rn_le, cs, id;
+
+	if (w1_id)
+		module_id = w1_id;
+	else
+		module_id = 0x1;
+
+	rn_le = cpu_to_le64(module_id);
+	/*
+	 * HDQ might not obey truly the 1-wire spec.
+	 * So calculate CRC based on module parameter.
+	 */
+	cs = w1_calc_crc8((u8 *)&rn_le, 7);
+	id = (cs << 56) | module_id;
+
+	slave_found(master_dev, id);
+}
+
+/* Issue break pulse to the device */
+static int omap_hdq_break(struct hdq_data *hdq_data)
+{
+	int ret = 0;
+	u8 tmp_status;
+
+	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (ret < 0) {
+		dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+		ret = -EINTR;
+		goto rtn;
+	}
+
+	if (hdq_data->hdq_irqstatus)
+		dev_err(hdq_data->dev, "break irqstatus not cleared (%02x)\n",
+			hdq_data->hdq_irqstatus);
+
+	/* set the INIT and GO bit */
+	hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+		OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO,
+		OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+		OMAP_HDQ_CTRL_STATUS_GO);
+
+	/* wait for the TIMEOUT bit */
+	ret = wait_event_timeout(hdq_wait_queue,
+		(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_TIMEOUT),
+		OMAP_HDQ_TIMEOUT);
+	tmp_status = hdq_reset_irqstatus(hdq_data, OMAP_HDQ_INT_STATUS_TIMEOUT);
+	if (ret == 0) {
+		dev_dbg(hdq_data->dev, "break wait elapsed\n");
+		ret = -EINTR;
+		goto out;
+	}
+
+	/* check irqstatus */
+	if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) {
+		dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x\n",
+			tmp_status);
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/*
+	 * check for the presence detect bit to get
+	 * set to show that the slave is responding
+	 */
+	if (!(hdq_reg_in(hdq_data, OMAP_HDQ_CTRL_STATUS) &
+			OMAP_HDQ_CTRL_STATUS_PRESENCE)) {
+		dev_dbg(hdq_data->dev, "Presence bit not set\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/*
+	 * wait for both INIT and GO bits rerurn to zero.
+	 * zero wait time expected for interrupt mode.
+	 */
+	ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS,
+			OMAP_HDQ_CTRL_STATUS_INITIALIZATION |
+			OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR,
+			&tmp_status);
+	if (ret)
+		dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
+			" return to zero, %x\n", tmp_status);
+
+out:
+	mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+	return ret;
+}
+
+static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
+{
+	int ret = 0;
+	u8 status;
+
+	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (ret < 0) {
+		ret = -EINTR;
+		goto rtn;
+	}
+
+	if (pm_runtime_suspended(hdq_data->dev)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+		hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS,
+			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
+			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
+		/*
+		 * The RX comes immediately after TX.
+		 */
+		wait_event_timeout(hdq_wait_queue,
+				   (hdq_data->hdq_irqstatus
+				    & (OMAP_HDQ_INT_STATUS_RXCOMPLETE |
+				       OMAP_HDQ_INT_STATUS_TIMEOUT)),
+				   OMAP_HDQ_TIMEOUT);
+		status = hdq_reset_irqstatus(hdq_data,
+					     OMAP_HDQ_INT_STATUS_RXCOMPLETE |
+					     OMAP_HDQ_INT_STATUS_TIMEOUT);
+		hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
+			OMAP_HDQ_CTRL_STATUS_DIR);
+
+		/* check irqstatus */
+		if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
+			dev_dbg(hdq_data->dev, "timeout waiting for"
+				" RXCOMPLETE, %x", status);
+			ret = -ETIMEDOUT;
+			goto out;
+		}
+	} else { /* interrupt had occurred before hdq_read_byte was called */
+		hdq_reset_irqstatus(hdq_data, OMAP_HDQ_INT_STATUS_RXCOMPLETE);
+	}
+	/* the data is ready. Read it in! */
+	*val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA);
+out:
+	mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+	return ret;
+
+}
+
+/*
+ * W1 triplet callback function - used for searching ROM addresses.
+ * Registered only when controller is in 1-wire mode.
+ */
+static u8 omap_w1_triplet(void *_hdq, u8 bdir)
+{
+	u8 id_bit, comp_bit;
+	int err;
+	u8 ret = 0x3; /* no slaves responded */
+	struct hdq_data *hdq_data = _hdq;
+	u8 ctrl = OMAP_HDQ_CTRL_STATUS_SINGLE | OMAP_HDQ_CTRL_STATUS_GO |
+		  OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK;
+	u8 mask = ctrl | OMAP_HDQ_CTRL_STATUS_DIR;
+
+	err = pm_runtime_get_sync(hdq_data->dev);
+	if (err < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return err;
+	}
+
+	err = mutex_lock_interruptible(&hdq_data->hdq_mutex);
+	if (err < 0) {
+		dev_dbg(hdq_data->dev, "Could not acquire mutex\n");
+		goto rtn;
+	}
+
+	/* read id_bit */
+	hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS,
+		      ctrl | OMAP_HDQ_CTRL_STATUS_DIR, mask);
+	err = wait_event_timeout(hdq_wait_queue,
+				 (hdq_data->hdq_irqstatus
+				  & OMAP_HDQ_INT_STATUS_RXCOMPLETE),
+				 OMAP_HDQ_TIMEOUT);
+	/* Must clear irqstatus for another RXCOMPLETE interrupt */
+	hdq_reset_irqstatus(hdq_data, OMAP_HDQ_INT_STATUS_RXCOMPLETE);
+
+	if (err == 0) {
+		dev_dbg(hdq_data->dev, "RX wait elapsed\n");
+		goto out;
+	}
+	id_bit = (hdq_reg_in(_hdq, OMAP_HDQ_RX_DATA) & 0x01);
+
+	/* read comp_bit */
+	hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS,
+		      ctrl | OMAP_HDQ_CTRL_STATUS_DIR, mask);
+	err = wait_event_timeout(hdq_wait_queue,
+				 (hdq_data->hdq_irqstatus
+				  & OMAP_HDQ_INT_STATUS_RXCOMPLETE),
+				 OMAP_HDQ_TIMEOUT);
+	/* Must clear irqstatus for another RXCOMPLETE interrupt */
+	hdq_reset_irqstatus(hdq_data, OMAP_HDQ_INT_STATUS_RXCOMPLETE);
+
+	if (err == 0) {
+		dev_dbg(hdq_data->dev, "RX wait elapsed\n");
+		goto out;
+	}
+	comp_bit = (hdq_reg_in(_hdq, OMAP_HDQ_RX_DATA) & 0x01);
+
+	if (id_bit && comp_bit) {
+		ret = 0x03;  /* no slaves responded */
+		goto out;
+	}
+	if (!id_bit && !comp_bit) {
+		/* Both bits are valid, take the direction given */
+		ret = bdir ? 0x04 : 0;
+	} else {
+		/* Only one bit is valid, take that direction */
+		bdir = id_bit;
+		ret = id_bit ? 0x05 : 0x02;
+	}
+
+	/* write bdir bit */
+	hdq_reg_out(_hdq, OMAP_HDQ_TX_DATA, bdir);
+	hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, ctrl, mask);
+	err = wait_event_timeout(hdq_wait_queue,
+				 (hdq_data->hdq_irqstatus
+				  & OMAP_HDQ_INT_STATUS_TXCOMPLETE),
+				 OMAP_HDQ_TIMEOUT);
+	/* Must clear irqstatus for another TXCOMPLETE interrupt */
+	hdq_reset_irqstatus(hdq_data, OMAP_HDQ_INT_STATUS_TXCOMPLETE);
+
+	if (err == 0) {
+		dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+		goto out;
+	}
+
+	hdq_reg_merge(_hdq, OMAP_HDQ_CTRL_STATUS, 0,
+		      OMAP_HDQ_CTRL_STATUS_SINGLE);
+
+out:
+	mutex_unlock(&hdq_data->hdq_mutex);
+rtn:
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
+
+	return ret;
+}
+
+/* reset callback */
+static u8 omap_w1_reset_bus(void *_hdq)
+{
+	struct hdq_data *hdq_data = _hdq;
+	int err;
+
+	err = pm_runtime_get_sync(hdq_data->dev);
+	if (err < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return err;
+	}
+
+	omap_hdq_break(hdq_data);
+
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
+
+	return 0;
+}
+
+/* Read a byte of data from the device */
+static u8 omap_w1_read_byte(void *_hdq)
+{
+	struct hdq_data *hdq_data = _hdq;
+	u8 val = 0;
+	int ret;
+
+	ret = pm_runtime_get_sync(hdq_data->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return -1;
+	}
+
+	ret = hdq_read_byte(hdq_data, &val);
+	if (ret)
+		val = -1;
+
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
+
+	return val;
+}
+
+/* Write a byte of data to the device */
+static void omap_w1_write_byte(void *_hdq, u8 byte)
+{
+	struct hdq_data *hdq_data = _hdq;
+	int ret;
+	u8 status;
+
+	ret = pm_runtime_get_sync(hdq_data->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(hdq_data->dev);
+
+		return;
+	}
+
+	/*
+	 * We need to reset the slave before
+	 * issuing the SKIP ROM command, else
+	 * the slave will not work.
+	 */
+	if (byte == W1_SKIP_ROM)
+		omap_hdq_break(hdq_data);
+
+	ret = hdq_write_byte(hdq_data, byte, &status);
+	if (ret < 0) {
+		dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
+		goto out_err;
+	}
+
+out_err:
+	pm_runtime_mark_last_busy(hdq_data->dev);
+	pm_runtime_put_autosuspend(hdq_data->dev);
+}
+
+static struct w1_bus_master omap_w1_master = {
+	.read_byte	= omap_w1_read_byte,
+	.write_byte	= omap_w1_write_byte,
+	.reset_bus	= omap_w1_reset_bus,
+};
+
+static int __maybe_unused omap_hdq_runtime_suspend(struct device *dev)
+{
+	struct hdq_data *hdq_data = dev_get_drvdata(dev);
+
+	hdq_reg_out(hdq_data, 0, hdq_data->mode);
+	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+
+	return 0;
+}
+
+static int __maybe_unused omap_hdq_runtime_resume(struct device *dev)
+{
+	struct hdq_data *hdq_data = dev_get_drvdata(dev);
+
+	/* select HDQ/1W mode & enable clocks */
+	hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
+		    OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
+		    OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK |
+		    hdq_data->mode);
+	hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_hdq_pm_ops = {
+	SET_RUNTIME_PM_OPS(omap_hdq_runtime_suspend,
+			   omap_hdq_runtime_resume, NULL)
+};
+
+static int omap_hdq_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct hdq_data *hdq_data;
+	int ret, irq;
+	u8 rev;
+	const char *mode;
+
+	hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL);
+	if (!hdq_data) {
+		dev_dbg(&pdev->dev, "unable to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	hdq_data->dev = dev;
+	platform_set_drvdata(pdev, hdq_data);
+
+	hdq_data->hdq_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hdq_data->hdq_base))
+		return PTR_ERR(hdq_data->hdq_base);
+
+	mutex_init(&hdq_data->hdq_mutex);
+
+	ret = of_property_read_string(pdev->dev.of_node, "ti,mode", &mode);
+	if (ret < 0 || !strcmp(mode, "hdq")) {
+		hdq_data->mode = 0;
+		omap_w1_master.search = omap_w1_search_bus;
+	} else {
+		hdq_data->mode = 1;
+		omap_w1_master.triplet = omap_w1_triplet;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 300);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		dev_dbg(&pdev->dev, "pm_runtime_get_sync failed\n");
+		goto err_w1;
+	}
+
+	rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
+	dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
+		(rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt");
+
+	spin_lock_init(&hdq_data->hdq_spinlock);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq	< 0) {
+		dev_dbg(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+		ret = irq;
+		goto err_irq;
+	}
+
+	ret = devm_request_irq(dev, irq, hdq_isr, 0, "omap_hdq", hdq_data);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "could not request irq\n");
+		goto err_irq;
+	}
+
+	omap_hdq_break(hdq_data);
+
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+
+	omap_w1_master.data = hdq_data;
+
+	ret = w1_add_master_device(&omap_w1_master);
+	if (ret) {
+		dev_dbg(&pdev->dev, "Failure in registering w1 master\n");
+		goto err_w1;
+	}
+
+	return 0;
+
+err_irq:
+	pm_runtime_put_sync(&pdev->dev);
+err_w1:
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int omap_hdq_remove(struct platform_device *pdev)
+{
+	int active;
+
+	active = pm_runtime_get_sync(&pdev->dev);
+	if (active < 0)
+		pm_runtime_put_noidle(&pdev->dev);
+
+	w1_remove_master_device(&omap_w1_master);
+
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	if (active >= 0)
+		pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id omap_hdq_dt_ids[] = {
+	{ .compatible = "ti,omap3-1w" },
+	{ .compatible = "ti,am4372-hdq" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, omap_hdq_dt_ids);
+
+static struct platform_driver omap_hdq_driver = {
+	.probe = omap_hdq_probe,
+	.remove = omap_hdq_remove,
+	.driver = {
+		.name =	"omap_hdq",
+		.of_match_table = omap_hdq_dt_ids,
+		.pm = &omap_hdq_pm_ops,
+	},
+};
+module_platform_driver(omap_hdq_driver);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("HDQ-1W driver Library");
+MODULE_LICENSE("GPL");