Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 338 insertions, 0 deletions

diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
new file mode 100644
index 000000000..ea0efd290
--- /dev/null
+++ b/drivers/xen/Kconfig
@@ -0,0 +1,338 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Xen driver support"
+	depends on XEN
+
+config XEN_BALLOON
+	bool "Xen memory balloon driver"
+	default y
+	help
+	  The balloon driver allows the Xen domain to request more memory from
+	  the system to expand the domain's memory allocation, or alternatively
+	  return unneeded memory to the system.
+
+config XEN_BALLOON_MEMORY_HOTPLUG
+	bool "Memory hotplug support for Xen balloon driver"
+	depends on XEN_BALLOON && MEMORY_HOTPLUG
+	default y
+	help
+	  Memory hotplug support for Xen balloon driver allows expanding memory
+	  available for the system above limit declared at system startup.
+	  It is very useful on critical systems which require long
+	  run without rebooting.
+
+	  It's also very useful for non PV domains to obtain unpopulated physical
+	  memory ranges to use in order to map foreign memory or grants.
+
+	  Memory could be hotplugged in following steps:
+
+	    1) target domain: ensure that memory auto online policy is in
+	       effect by checking /sys/devices/system/memory/auto_online_blocks
+	       file (should be 'online').
+
+	    2) control domain: xl mem-max <target-domain> <maxmem>
+	       where <maxmem> is >= requested memory size,
+
+	    3) control domain: xl mem-set <target-domain> <memory>
+	       where <memory> is requested memory size; alternatively memory
+	       could be added by writing proper value to
+	       /sys/devices/system/xen_memory/xen_memory0/target or
+	       /sys/devices/system/xen_memory/xen_memory0/target_kb on the
+	       target domain.
+
+	  Alternatively, if memory auto onlining was not requested at step 1
+	  the newly added memory can be manually onlined in the target domain
+	  by doing the following:
+
+		for i in /sys/devices/system/memory/memory*/state; do \
+		  [ "`cat "$i"`" = offline ] && echo online > "$i"; done
+
+	  or by adding the following line to udev rules:
+
+	  SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'"
+
+config XEN_MEMORY_HOTPLUG_LIMIT
+	int "Hotplugged memory limit (in GiB) for a PV guest"
+	default 512
+	depends on XEN_HAVE_PVMMU
+	depends on MEMORY_HOTPLUG
+	help
+	  Maxmium amount of memory (in GiB) that a PV guest can be
+	  expanded to when using memory hotplug.
+
+	  A PV guest can have more memory than this limit if is
+	  started with a larger maximum.
+
+	  This value is used to allocate enough space in internal
+	  tables needed for physical memory administration.
+
+config XEN_SCRUB_PAGES_DEFAULT
+	bool "Scrub pages before returning them to system by default"
+	depends on XEN_BALLOON
+	default y
+	help
+	  Scrub pages before returning them to the system for reuse by
+	  other domains.  This makes sure that any confidential data
+	  is not accidentally visible to other domains.  It is more
+	  secure, but slightly less efficient. This can be controlled with
+	  xen_scrub_pages=0 parameter and
+	  /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
+	  This option only sets the default value.
+
+	  If in doubt, say yes.
+
+config XEN_DEV_EVTCHN
+	tristate "Xen /dev/xen/evtchn device"
+	default y
+	help
+	  The evtchn driver allows a userspace process to trigger event
+	  channels and to receive notification of an event channel
+	  firing.
+	  If in doubt, say yes.
+
+config XEN_BACKEND
+	bool "Backend driver support"
+	default XEN_DOM0
+	help
+	  Support for backend device drivers that provide I/O services
+	  to other virtual machines.
+
+config XENFS
+	tristate "Xen filesystem"
+	select XEN_PRIVCMD
+	default y
+	help
+	  The xen filesystem provides a way for domains to share
+	  information with each other and with the hypervisor.
+	  For example, by reading and writing the "xenbus" file, guests
+	  may pass arbitrary information to the initial domain.
+	  If in doubt, say yes.
+
+config XEN_COMPAT_XENFS
+	bool "Create compatibility mount point /proc/xen"
+	depends on XENFS
+	default y
+	help
+	  The old xenstore userspace tools expect to find "xenbus"
+	  under /proc/xen, but "xenbus" is now found at the root of the
+	  xenfs filesystem.  Selecting this causes the kernel to create
+	  the compatibility mount point /proc/xen if it is running on
+	  a xen platform.
+	  If in doubt, say yes.
+
+config XEN_SYS_HYPERVISOR
+	bool "Create xen entries under /sys/hypervisor"
+	depends on SYSFS
+	select SYS_HYPERVISOR
+	default y
+	help
+	  Create entries under /sys/hypervisor describing the Xen
+	  hypervisor environment.  When running native or in another
+	  virtual environment, /sys/hypervisor will still be present,
+	  but will have no xen contents.
+
+config XEN_XENBUS_FRONTEND
+	tristate
+
+config XEN_GNTDEV
+	tristate "userspace grant access device driver"
+	depends on XEN
+	default m
+	select MMU_NOTIFIER
+	help
+	  Allows userspace processes to use grants.
+
+config XEN_GNTDEV_DMABUF
+	bool "Add support for dma-buf grant access device driver extension"
+	depends on XEN_GNTDEV && XEN_GRANT_DMA_ALLOC
+	select DMA_SHARED_BUFFER
+	help
+	  Allows userspace processes and kernel modules to use Xen backed
+	  dma-buf implementation. With this extension grant references to
+	  the pages of an imported dma-buf can be exported for other domain
+	  use and grant references coming from a foreign domain can be
+	  converted into a local dma-buf for local export.
+
+config XEN_GRANT_DEV_ALLOC
+	tristate "User-space grant reference allocator driver"
+	depends on XEN
+	default m
+	help
+	  Allows userspace processes to create pages with access granted
+	  to other domains. This can be used to implement frontend drivers
+	  or as part of an inter-domain shared memory channel.
+
+config XEN_GRANT_DMA_ALLOC
+	bool "Allow allocating DMA capable buffers with grant reference module"
+	depends on XEN && HAS_DMA
+	help
+	  Extends grant table module API to allow allocating DMA capable
+	  buffers and mapping foreign grant references on top of it.
+	  The resulting buffer is similar to one allocated by the balloon
+	  driver in that proper memory reservation is made by
+	  ({increase|decrease}_reservation and VA mappings are updated if
+	  needed).
+	  This is useful for sharing foreign buffers with HW drivers which
+	  cannot work with scattered buffers provided by the balloon driver,
+	  but require DMAable memory instead.
+
+config SWIOTLB_XEN
+	def_bool y
+	select DMA_OPS
+	select SWIOTLB
+
+config XEN_PCIDEV_BACKEND
+	tristate "Xen PCI-device backend driver"
+	depends on PCI && X86 && XEN
+	depends on XEN_BACKEND
+	default m
+	help
+	  The PCI device backend driver allows the kernel to export arbitrary
+	  PCI devices to other guests. If you select this to be a module, you
+	  will need to make sure no other driver has bound to the device(s)
+	  you want to make visible to other guests.
+
+	  The parameter "passthrough" allows you specify how you want the PCI
+	  devices to appear in the guest. You can choose the default (0) where
+	  PCI topology starts at 00.00.0, or (1) for passthrough if you want
+	  the PCI devices topology appear the same as in the host.
+
+	  The "hide" parameter (only applicable if backend driver is compiled
+	  into the kernel) allows you to bind the PCI devices to this module
+	  from the default device drivers. The argument is the list of PCI BDFs:
+	  xen-pciback.hide=(03:00.0)(04:00.0)
+
+	  If in doubt, say m.
+
+config XEN_PVCALLS_FRONTEND
+	tristate "XEN PV Calls frontend driver"
+	depends on INET && XEN
+	select XEN_XENBUS_FRONTEND
+	help
+	  Experimental frontend for the Xen PV Calls protocol
+	  (https://xenbits.xen.org/docs/unstable/misc/pvcalls.html). It
+	  sends a small set of POSIX calls to the backend, which
+	  implements them.
+
+config XEN_PVCALLS_BACKEND
+	bool "XEN PV Calls backend driver"
+	depends on INET && XEN && XEN_BACKEND
+	help
+	  Experimental backend for the Xen PV Calls protocol
+	  (https://xenbits.xen.org/docs/unstable/misc/pvcalls.html). It
+	  allows PV Calls frontends to send POSIX calls to the backend,
+	  which implements them.
+
+	  If in doubt, say n.
+
+config XEN_SCSI_BACKEND
+	tristate "XEN SCSI backend driver"
+	depends on XEN && XEN_BACKEND && TARGET_CORE
+	help
+	  The SCSI backend driver allows the kernel to export its SCSI Devices
+	  to other guests via a high-performance shared-memory interface.
+	  Only needed for systems running as XEN driver domains (e.g. Dom0) and
+	  if guests need generic access to SCSI devices.
+
+config XEN_PRIVCMD
+	tristate
+	depends on XEN
+	default m
+
+config XEN_STUB
+	bool "Xen stub drivers"
+	depends on XEN && X86_64 && BROKEN
+	help
+	  Allow kernel to install stub drivers, to reserve space for Xen drivers,
+	  i.e. memory hotplug and cpu hotplug, and to block native drivers loaded,
+	  so that real Xen drivers can be modular.
+
+	  To enable Xen features like cpu and memory hotplug, select Y here.
+
+config XEN_ACPI_HOTPLUG_MEMORY
+	tristate "Xen ACPI memory hotplug"
+	depends on XEN_DOM0 && XEN_STUB && ACPI
+	help
+	  This is Xen ACPI memory hotplug.
+
+	  Currently Xen only support ACPI memory hot-add. If you want
+	  to hot-add memory at runtime (the hot-added memory cannot be
+	  removed until machine stop), select Y/M here, otherwise select N.
+
+config XEN_ACPI_HOTPLUG_CPU
+	tristate "Xen ACPI cpu hotplug"
+	depends on XEN_DOM0 && XEN_STUB && ACPI
+	select ACPI_CONTAINER
+	help
+	  Xen ACPI cpu enumerating and hotplugging
+
+	  For hotplugging, currently Xen only support ACPI cpu hotadd.
+	  If you want to hotadd cpu at runtime (the hotadded cpu cannot
+	  be removed until machine stop), select Y/M here.
+
+config XEN_ACPI_PROCESSOR
+	tristate "Xen ACPI processor"
+	depends on XEN && XEN_DOM0 && X86 && ACPI_PROCESSOR && CPU_FREQ
+	default m
+	help
+	  This ACPI processor uploads Power Management information to the Xen
+	  hypervisor.
+
+	  To do that the driver parses the Power Management data and uploads
+	  said information to the Xen hypervisor. Then the Xen hypervisor can
+	  select the proper Cx and Pxx states. It also registers itself as the
+	  SMM so that other drivers (such as ACPI cpufreq scaling driver) will
+	  not load.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called xen_acpi_processor  If you do not know what to choose, select
+	  M here. If the CPUFREQ drivers are built in, select Y here.
+
+config XEN_MCE_LOG
+	bool "Xen platform mcelog"
+	depends on XEN_DOM0 && X86_MCE
+	help
+	  Allow kernel fetching MCE error from Xen platform and
+	  converting it into Linux mcelog format for mcelog tools
+
+config XEN_HAVE_PVMMU
+	bool
+
+config XEN_EFI
+	def_bool y
+	depends on (ARM || ARM64 || X86_64) && EFI
+
+config XEN_AUTO_XLATE
+	def_bool y
+	depends on ARM || ARM64 || XEN_PVHVM
+	help
+	  Support for auto-translated physmap guests.
+
+config XEN_ACPI
+	def_bool y
+	depends on X86 && ACPI
+
+config XEN_SYMS
+	bool "Xen symbols"
+	depends on X86 && XEN_DOM0 && XENFS
+	default y if KALLSYMS
+	help
+	  Exports hypervisor symbols (along with their types and addresses) via
+	  /proc/xen/xensyms file, similar to /proc/kallsyms
+
+config XEN_HAVE_VPMU
+	bool
+
+config XEN_FRONT_PGDIR_SHBUF
+	tristate
+
+config XEN_UNPOPULATED_ALLOC
+	bool "Use unpopulated memory ranges for guest mappings"
+	depends on X86 && ZONE_DEVICE
+	default XEN_BACKEND || XEN_GNTDEV || XEN_DOM0
+	help
+	  Use unpopulated memory ranges in order to create mappings for guest
+	  memory regions, including grant maps and foreign pages. This avoids
+	  having to balloon out RAM regions in order to obtain physical memory
+	  space to create such mappings.
+
+endmenu