Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 994 insertions, 0 deletions

diff --git a/include/misc/altera.h b/include/misc/altera.h
new file mode 100644
index 000000000..60cb5c598
--- /dev/null
+++ b/include/misc/altera.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * altera.h
+ *
+ * altera FPGA driver
+ *
+ * Copyright (C) Altera Corporation 1998-2001
+ * Copyright (C) 2010 NetUP Inc.
+ * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru>
+ */
+
+#ifndef _ALTERA_H_
+#define _ALTERA_H_
+
+struct altera_config {
+	void *dev;
+	u8 *action;
+	int (*jtag_io) (void *dev, int tms, int tdi, int tdo);
+};
+
+#if defined(CONFIG_ALTERA_STAPL) || \
+		(defined(CONFIG_ALTERA_STAPL_MODULE) && defined(MODULE))
+
+extern int altera_init(struct altera_config *config, const struct firmware *fw);
+#else
+
+static inline int altera_init(struct altera_config *config,
+						const struct firmware *fw)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+#endif /* CONFIG_ALTERA_STAPL */
+
+#endif /* _ALTERA_H_ */
diff --git a/include/misc/cxl-base.h b/include/misc/cxl-base.h
new file mode 100644
index 000000000..2251da7f3
--- /dev/null
+++ b/include/misc/cxl-base.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2014 IBM Corp.
+ */
+
+#ifndef _MISC_CXL_BASE_H
+#define _MISC_CXL_BASE_H
+
+#ifdef CONFIG_CXL_BASE
+
+#define CXL_IRQ_RANGES 4
+
+struct cxl_irq_ranges {
+	irq_hw_number_t offset[CXL_IRQ_RANGES];
+	irq_hw_number_t range[CXL_IRQ_RANGES];
+};
+
+extern atomic_t cxl_use_count;
+
+static inline bool cxl_ctx_in_use(void)
+{
+       return (atomic_read(&cxl_use_count) != 0);
+}
+
+static inline void cxl_ctx_get(void)
+{
+       atomic_inc(&cxl_use_count);
+}
+
+static inline void cxl_ctx_put(void)
+{
+       atomic_dec(&cxl_use_count);
+}
+
+struct cxl_afu *cxl_afu_get(struct cxl_afu *afu);
+void cxl_afu_put(struct cxl_afu *afu);
+void cxl_slbia(struct mm_struct *mm);
+
+#else /* CONFIG_CXL_BASE */
+
+static inline bool cxl_ctx_in_use(void) { return false; }
+static inline struct cxl_afu *cxl_afu_get(struct cxl_afu *afu) { return NULL; }
+static inline void cxl_afu_put(struct cxl_afu *afu) {}
+static inline void cxl_slbia(struct mm_struct *mm) {}
+
+#endif /* CONFIG_CXL_BASE */
+
+#endif
diff --git a/include/misc/cxl.h b/include/misc/cxl.h
new file mode 100644
index 000000000..0410412de
--- /dev/null
+++ b/include/misc/cxl.h
@@ -0,0 +1,265 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2015 IBM Corp.
+ */
+
+#ifndef _MISC_CXL_H
+#define _MISC_CXL_H
+
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/interrupt.h>
+#include <uapi/misc/cxl.h>
+
+/*
+ * This documents the in kernel API for driver to use CXL. It allows kernel
+ * drivers to bind to AFUs using an AFU configuration record exposed as a PCI
+ * configuration record.
+ *
+ * This API enables control over AFU and contexts which can't be part of the
+ * generic PCI API. This API is agnostic to the actual AFU.
+ */
+
+/* Get the AFU associated with a pci_dev */
+struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev);
+
+/* Get the AFU conf record number associated with a pci_dev */
+unsigned int cxl_pci_to_cfg_record(struct pci_dev *dev);
+
+
+/*
+ * Context lifetime overview:
+ *
+ * An AFU context may be inited and then started and stoppped multiple times
+ * before it's released. ie.
+ *    - cxl_dev_context_init()
+ *      - cxl_start_context()
+ *      - cxl_stop_context()
+ *      - cxl_start_context()
+ *      - cxl_stop_context()
+ *     ...repeat...
+ *    - cxl_release_context()
+ * Once released, a context can't be started again.
+ *
+ * One context is inited by the cxl driver for every pci_dev. This is to be
+ * used as a default kernel context. cxl_get_context() will get this
+ * context. This context will be released by PCI hot unplug, so doesn't need to
+ * be released explicitly by drivers.
+ *
+ * Additional kernel contexts may be inited using cxl_dev_context_init().
+ * These must be released using cxl_context_detach().
+ *
+ * Once a context has been inited, IRQs may be configured. Firstly these IRQs
+ * must be allocated (cxl_allocate_afu_irqs()), then individually mapped to
+ * specific handlers (cxl_map_afu_irq()).
+ *
+ * These IRQs can be unmapped (cxl_unmap_afu_irq()) and finally released
+ * (cxl_free_afu_irqs()).
+ *
+ * The AFU can be reset (cxl_afu_reset()). This will cause the PSL/AFU
+ * hardware to lose track of all contexts. It's upto the caller of
+ * cxl_afu_reset() to restart these contexts.
+ */
+
+/*
+ * On pci_enabled_device(), the cxl driver will init a single cxl context for
+ * use by the driver. It doesn't start this context (as that will likely
+ * generate DMA traffic for most AFUs).
+ *
+ * This gets the default context associated with this pci_dev.  This context
+ * doesn't need to be released as this will be done by the PCI subsystem on hot
+ * unplug.
+ */
+struct cxl_context *cxl_get_context(struct pci_dev *dev);
+/*
+ * Allocate and initalise a context associated with a AFU PCI device. This
+ * doesn't start the context in the AFU.
+ */
+struct cxl_context *cxl_dev_context_init(struct pci_dev *dev);
+/*
+ * Release and free a context. Context should be stopped before calling.
+ */
+int cxl_release_context(struct cxl_context *ctx);
+
+/*
+ * Set and get private data associated with a context. Allows drivers to have a
+ * back pointer to some useful structure.
+ */
+int cxl_set_priv(struct cxl_context *ctx, void *priv);
+void *cxl_get_priv(struct cxl_context *ctx);
+
+/*
+ * Allocate AFU interrupts for this context. num=0 will allocate the default
+ * for this AFU as given in the AFU descriptor. This number doesn't include the
+ * interrupt 0 (CAIA defines AFU IRQ 0 for page faults). Each interrupt to be
+ * used must map a handler with cxl_map_afu_irq.
+ */
+int cxl_allocate_afu_irqs(struct cxl_context *cxl, int num);
+/* Free allocated interrupts */
+void cxl_free_afu_irqs(struct cxl_context *cxl);
+
+/*
+ * Map a handler for an AFU interrupt associated with a particular context. AFU
+ * IRQS numbers start from 1 (CAIA defines AFU IRQ 0 for page faults). cookie
+ * is private data is that will be provided to the interrupt handler.
+ */
+int cxl_map_afu_irq(struct cxl_context *cxl, int num,
+		    irq_handler_t handler, void *cookie, char *name);
+/* unmap mapped IRQ handlers */
+void cxl_unmap_afu_irq(struct cxl_context *cxl, int num, void *cookie);
+
+/*
+ * Start work on the AFU. This starts an cxl context and associates it with a
+ * task. task == NULL will make it a kernel context.
+ */
+int cxl_start_context(struct cxl_context *ctx, u64 wed,
+		      struct task_struct *task);
+/*
+ * Stop a context and remove it from the PSL
+ */
+int cxl_stop_context(struct cxl_context *ctx);
+
+/* Reset the AFU */
+int cxl_afu_reset(struct cxl_context *ctx);
+
+/*
+ * Set a context as a master context.
+ * This sets the default problem space area mapped as the full space, rather
+ * than just the per context area (for slaves).
+ */
+void cxl_set_master(struct cxl_context *ctx);
+
+/*
+ * Map and unmap the AFU Problem Space area. The amount and location mapped
+ * depends on if this context is a master or slave.
+ */
+void __iomem *cxl_psa_map(struct cxl_context *ctx);
+void cxl_psa_unmap(void __iomem *addr);
+
+/*  Get the process element for this context */
+int cxl_process_element(struct cxl_context *ctx);
+
+/*
+ * These calls allow drivers to create their own file descriptors and make them
+ * identical to the cxl file descriptor user API. An example use case:
+ *
+ * struct file_operations cxl_my_fops = {};
+ * ......
+ *	// Init the context
+ *	ctx = cxl_dev_context_init(dev);
+ *	if (IS_ERR(ctx))
+ *		return PTR_ERR(ctx);
+ *	// Create and attach a new file descriptor to my file ops
+ *	file = cxl_get_fd(ctx, &cxl_my_fops, &fd);
+ *	// Start context
+ *	rc = cxl_start_work(ctx, &work.work);
+ *	if (rc) {
+ *		fput(file);
+ *		put_unused_fd(fd);
+ *		return -ENODEV;
+ *	}
+ *	// No error paths after installing the fd
+ *	fd_install(fd, file);
+ *	return fd;
+ *
+ * This inits a context, and gets a file descriptor and associates some file
+ * ops to that file descriptor. If the file ops are blank, the cxl driver will
+ * fill them in with the default ones that mimic the standard user API.  Once
+ * completed, the file descriptor can be installed. Once the file descriptor is
+ * installed, it's visible to the user so no errors must occur past this point.
+ *
+ * If cxl_fd_release() file op call is installed, the context will be stopped
+ * and released when the fd is released. Hence the driver won't need to manage
+ * this itself.
+ */
+
+/*
+ * Take a context and associate it with my file ops. Returns the associated
+ * file and file descriptor. Any file ops which are blank are filled in by the
+ * cxl driver with the default ops to mimic the standard API.
+ */
+struct file *cxl_get_fd(struct cxl_context *ctx, struct file_operations *fops,
+			int *fd);
+/* Get the context associated with this file */
+struct cxl_context *cxl_fops_get_context(struct file *file);
+/*
+ * Start a context associated a struct cxl_ioctl_start_work used by the
+ * standard cxl user API.
+ */
+int cxl_start_work(struct cxl_context *ctx,
+		   struct cxl_ioctl_start_work *work);
+/*
+ * Export all the existing fops so drivers can use them
+ */
+int cxl_fd_open(struct inode *inode, struct file *file);
+int cxl_fd_release(struct inode *inode, struct file *file);
+long cxl_fd_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+int cxl_fd_mmap(struct file *file, struct vm_area_struct *vm);
+__poll_t cxl_fd_poll(struct file *file, struct poll_table_struct *poll);
+ssize_t cxl_fd_read(struct file *file, char __user *buf, size_t count,
+			   loff_t *off);
+
+/*
+ * For EEH, a driver may want to assert a PERST will reload the same image
+ * from flash into the FPGA.
+ *
+ * This is a property of the entire adapter, not a single AFU, so drivers
+ * should set this property with care!
+ */
+void cxl_perst_reloads_same_image(struct cxl_afu *afu,
+				  bool perst_reloads_same_image);
+
+/*
+ * Read the VPD for the card where the AFU resides
+ */
+ssize_t cxl_read_adapter_vpd(struct pci_dev *dev, void *buf, size_t count);
+
+/*
+ * AFU driver ops allow an AFU driver to create their own events to pass to
+ * userspace through the file descriptor as a simpler alternative to overriding
+ * the read() and poll() calls that works with the generic cxl events. These
+ * events are given priority over the generic cxl events, so they will be
+ * delivered first if multiple types of events are pending.
+ *
+ * The AFU driver must call cxl_context_events_pending() to notify the cxl
+ * driver that new events are ready to be delivered for a specific context.
+ * cxl_context_events_pending() will adjust the current count of AFU driver
+ * events for this context, and wake up anyone waiting on the context wait
+ * queue.
+ *
+ * The cxl driver will then call fetch_event() to get a structure defining
+ * the size and address of the driver specific event data. The cxl driver
+ * will build a cxl header with type and process_element fields filled in,
+ * and header.size set to sizeof(struct cxl_event_header) + data_size.
+ * The total size of the event is limited to CXL_READ_MIN_SIZE (4K).
+ *
+ * fetch_event() is called with a spin lock held, so it must not sleep.
+ *
+ * The cxl driver will then deliver the event to userspace, and finally
+ * call event_delivered() to return the status of the operation, identified
+ * by cxl context and AFU driver event data pointers.
+ *   0        Success
+ *   -EFAULT  copy_to_user() has failed
+ *   -EINVAL  Event data pointer is NULL, or event size is greater than
+ *            CXL_READ_MIN_SIZE.
+ */
+struct cxl_afu_driver_ops {
+	struct cxl_event_afu_driver_reserved *(*fetch_event) (
+						struct cxl_context *ctx);
+	void (*event_delivered) (struct cxl_context *ctx,
+				 struct cxl_event_afu_driver_reserved *event,
+				 int rc);
+};
+
+/*
+ * Associate the above driver ops with a specific context.
+ * Reset the current count of AFU driver events.
+ */
+void cxl_set_driver_ops(struct cxl_context *ctx,
+			struct cxl_afu_driver_ops *ops);
+
+/* Notify cxl driver that new events are ready to be delivered for context */
+void cxl_context_events_pending(struct cxl_context *ctx,
+				unsigned int new_events);
+
+#endif /* _MISC_CXL_H */
diff --git a/include/misc/cxllib.h b/include/misc/cxllib.h
new file mode 100644
index 000000000..eacc41728
--- /dev/null
+++ b/include/misc/cxllib.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2017 IBM Corp.
+ */
+
+#ifndef _MISC_CXLLIB_H
+#define _MISC_CXLLIB_H
+
+#include <linux/pci.h>
+#include <asm/reg.h>
+
+/*
+ * cxl driver exports a in-kernel 'library' API which can be called by
+ * other drivers to help interacting with an IBM XSL.
+ */
+
+/*
+ * tells whether capi is supported on the PCIe slot where the
+ * device is seated
+ *
+ * Input:
+ *	dev: device whose slot needs to be checked
+ *	flags: 0 for the time being
+ */
+bool cxllib_slot_is_supported(struct pci_dev *dev, unsigned long flags);
+
+
+/*
+ * Returns the configuration parameters to be used by the XSL or device
+ *
+ * Input:
+ *	dev: device, used to find PHB
+ * Output:
+ *	struct cxllib_xsl_config:
+ *		version
+ *		capi BAR address, i.e. 0x2000000000000-0x2FFFFFFFFFFFF
+ *		capi BAR size
+ *		data send control (XSL_DSNCTL)
+ *		dummy read address (XSL_DRA)
+ */
+#define CXL_XSL_CONFIG_VERSION1		1
+struct cxllib_xsl_config {
+	u32	version;     /* format version for register encoding */
+	u32	log_bar_size;/* log size of the capi_window */
+	u64	bar_addr;    /* address of the start of capi window */
+	u64	dsnctl;      /* matches definition of XSL_DSNCTL */
+	u64	dra;         /* real address that can be used for dummy read */
+};
+
+int cxllib_get_xsl_config(struct pci_dev *dev, struct cxllib_xsl_config *cfg);
+
+
+/*
+ * Activate capi for the pci host bridge associated with the device.
+ * Can be extended to deactivate once we know how to do it.
+ * Device must be ready to accept messages from the CAPP unit and
+ * respond accordingly (TLB invalidates, ...)
+ *
+ * PHB is switched to capi mode through calls to skiboot.
+ * CAPP snooping is activated
+ *
+ * Input:
+ *	dev: device whose PHB should switch mode
+ *	mode: mode to switch to i.e. CAPI or PCI
+ *	flags: options related to the mode
+ */
+enum cxllib_mode {
+	CXL_MODE_CXL,
+	CXL_MODE_PCI,
+};
+
+#define CXL_MODE_NO_DMA       0
+#define CXL_MODE_DMA_TVT0     1
+#define CXL_MODE_DMA_TVT1     2
+
+int cxllib_switch_phb_mode(struct pci_dev *dev, enum cxllib_mode mode,
+			unsigned long flags);
+
+
+/*
+ * Set the device for capi DMA.
+ * Define its dma_ops and dma offset so that allocations will be using TVT#1
+ *
+ * Input:
+ *	dev: device to set
+ *	flags: options. CXL_MODE_DMA_TVT1 should be used
+ */
+int cxllib_set_device_dma(struct pci_dev *dev, unsigned long flags);
+
+
+/*
+ * Get the Process Element structure for the given thread
+ *
+ * Input:
+ *    task: task_struct for the context of the translation
+ *    translation_mode: whether addresses should be translated
+ * Output:
+ *    attr: attributes to fill up the Process Element structure from CAIA
+ */
+struct cxllib_pe_attributes {
+	u64 sr;
+	u32 lpid;
+	u32 tid;
+	u32 pid;
+};
+#define CXL_TRANSLATED_MODE 0
+#define CXL_REAL_MODE 1
+
+int cxllib_get_PE_attributes(struct task_struct *task,
+	     unsigned long translation_mode, struct cxllib_pe_attributes *attr);
+
+
+/*
+ * Handle memory fault.
+ * Fault in all the pages of the specified buffer for the permissions
+ * provided in ‘flags’
+ *
+ * Shouldn't be called from interrupt context
+ *
+ * Input:
+ *	mm: struct mm for the thread faulting the pages
+ *	addr: base address of the buffer to page in
+ *	size: size of the buffer to page in
+ *	flags: permission requested (DSISR_ISSTORE...)
+ */
+int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags);
+
+
+#endif /* _MISC_CXLLIB_H */
diff --git a/include/misc/ocxl-config.h b/include/misc/ocxl-config.h
new file mode 100644
index 000000000..ccfd3b463
--- /dev/null
+++ b/include/misc/ocxl-config.h
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2017 IBM Corp.
+#ifndef _OCXL_CONFIG_H_
+#define _OCXL_CONFIG_H_
+
+/*
+ * This file lists the various constants used to read the
+ * configuration space of an opencapi adapter.
+ *
+ * It follows the specification for opencapi 3.0
+ */
+
+#define OCXL_EXT_CAP_ID_DVSEC                 0x23
+
+#define OCXL_DVSEC_VENDOR_OFFSET              0x4
+#define OCXL_DVSEC_ID_OFFSET                  0x8
+#define OCXL_DVSEC_TL_ID                      0xF000
+#define   OCXL_DVSEC_TL_BACKOFF_TIMERS          0x10
+#define   OCXL_DVSEC_TL_RECV_CAP                0x18
+#define   OCXL_DVSEC_TL_SEND_CAP                0x20
+#define   OCXL_DVSEC_TL_RECV_RATE               0x30
+#define   OCXL_DVSEC_TL_SEND_RATE               0x50
+#define OCXL_DVSEC_FUNC_ID                    0xF001
+#define   OCXL_DVSEC_FUNC_OFF_INDEX             0x08
+#define   OCXL_DVSEC_FUNC_OFF_ACTAG             0x0C
+#define OCXL_DVSEC_AFU_INFO_ID                0xF003
+#define   OCXL_DVSEC_AFU_INFO_AFU_IDX           0x0A
+#define   OCXL_DVSEC_AFU_INFO_OFF               0x0C
+#define   OCXL_DVSEC_AFU_INFO_DATA              0x10
+#define OCXL_DVSEC_AFU_CTRL_ID                0xF004
+#define   OCXL_DVSEC_AFU_CTRL_AFU_IDX           0x0A
+#define   OCXL_DVSEC_AFU_CTRL_TERM_PASID        0x0C
+#define   OCXL_DVSEC_AFU_CTRL_ENABLE            0x0F
+#define   OCXL_DVSEC_AFU_CTRL_PASID_SUP         0x10
+#define   OCXL_DVSEC_AFU_CTRL_PASID_EN          0x11
+#define   OCXL_DVSEC_AFU_CTRL_PASID_BASE        0x14
+#define   OCXL_DVSEC_AFU_CTRL_ACTAG_SUP         0x18
+#define   OCXL_DVSEC_AFU_CTRL_ACTAG_EN          0x1A
+#define   OCXL_DVSEC_AFU_CTRL_ACTAG_BASE        0x1C
+#define OCXL_DVSEC_VENDOR_ID                  0xF0F0
+#define   OCXL_DVSEC_VENDOR_CFG_VERS            0x0C
+#define   OCXL_DVSEC_VENDOR_TLX_VERS            0x10
+#define   OCXL_DVSEC_VENDOR_DLX_VERS            0x20
+#define   OCXL_DVSEC_VENDOR_RESET_RELOAD        0x38
+
+#endif /* _OCXL_CONFIG_H_ */
diff --git a/include/misc/ocxl.h b/include/misc/ocxl.h
new file mode 100644
index 000000000..e013736e2
--- /dev/null
+++ b/include/misc/ocxl.h
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2017 IBM Corp.
+#ifndef _MISC_OCXL_H_
+#define _MISC_OCXL_H_
+
+#include <linux/pci.h>
+
+/*
+ * Opencapi drivers all need some common facilities, like parsing the
+ * device configuration space, adding a Process Element to the Shared
+ * Process Area, etc...
+ *
+ * The ocxl module provides a kernel API, to allow other drivers to
+ * reuse common code. A bit like a in-kernel library.
+ */
+
+#define OCXL_AFU_NAME_SZ      (24+1)  /* add 1 for NULL termination */
+
+
+struct ocxl_afu_config {
+	u8 idx;
+	int dvsec_afu_control_pos; /* offset of AFU control DVSEC */
+	char name[OCXL_AFU_NAME_SZ];
+	u8 version_major;
+	u8 version_minor;
+	u8 afuc_type;
+	u8 afum_type;
+	u8 profile;
+	u8 global_mmio_bar;     /* global MMIO area */
+	u64 global_mmio_offset;
+	u32 global_mmio_size;
+	u8 pp_mmio_bar;         /* per-process MMIO area */
+	u64 pp_mmio_offset;
+	u32 pp_mmio_stride;
+	u64 lpc_mem_offset;
+	u64 lpc_mem_size;
+	u64 special_purpose_mem_offset;
+	u64 special_purpose_mem_size;
+	u8 pasid_supported_log;
+	u16 actag_supported;
+};
+
+struct ocxl_fn_config {
+	int dvsec_tl_pos;       /* offset of the Transaction Layer DVSEC */
+	int dvsec_function_pos; /* offset of the Function DVSEC */
+	int dvsec_afu_info_pos; /* offset of the AFU information DVSEC */
+	s8 max_pasid_log;
+	s8 max_afu_index;
+};
+
+enum ocxl_endian {
+	OCXL_BIG_ENDIAN = 0,    /**< AFU data is big-endian */
+	OCXL_LITTLE_ENDIAN = 1, /**< AFU data is little-endian */
+	OCXL_HOST_ENDIAN = 2,   /**< AFU data is the same endianness as the host */
+};
+
+// These are opaque outside the ocxl driver
+struct ocxl_afu;
+struct ocxl_fn;
+struct ocxl_context;
+
+// Device detection & initialisation
+
+/**
+ * ocxl_function_open() - Open an OpenCAPI function on an OpenCAPI device
+ * @dev: The PCI device that contains the function
+ *
+ * Returns an opaque pointer to the function, or an error pointer (check with IS_ERR)
+ */
+struct ocxl_fn *ocxl_function_open(struct pci_dev *dev);
+
+/**
+ * ocxl_function_afu_list() - Get the list of AFUs associated with a PCI function device
+ * Returns a list of struct ocxl_afu *
+ *
+ * @fn: The OpenCAPI function containing the AFUs
+ */
+struct list_head *ocxl_function_afu_list(struct ocxl_fn *fn);
+
+/**
+ * ocxl_function_fetch_afu() - Fetch an AFU instance from an OpenCAPI function
+ * @fn: The OpenCAPI function to get the AFU from
+ * @afu_idx: The index of the AFU to get
+ *
+ * If successful, the AFU should be released with ocxl_afu_put()
+ *
+ * Returns a pointer to the AFU, or NULL on error
+ */
+struct ocxl_afu *ocxl_function_fetch_afu(struct ocxl_fn *fn, u8 afu_idx);
+
+/**
+ * ocxl_afu_get() - Take a reference to an AFU
+ * @afu: The AFU to increment the reference count on
+ */
+void ocxl_afu_get(struct ocxl_afu *afu);
+
+/**
+ * ocxl_afu_put() - Release a reference to an AFU
+ * @afu: The AFU to decrement the reference count on
+ */
+void ocxl_afu_put(struct ocxl_afu *afu);
+
+
+/**
+ * ocxl_function_config() - Get the configuration information for an OpenCAPI function
+ * @fn: The OpenCAPI function to get the config for
+ *
+ * Returns the function config, or NULL on error
+ */
+const struct ocxl_fn_config *ocxl_function_config(struct ocxl_fn *fn);
+
+/**
+ * ocxl_function_close() - Close an OpenCAPI function
+ * This will free any AFUs previously retrieved from the function, and
+ * detach and associated contexts. The contexts must by freed by the caller.
+ *
+ * @fn: The OpenCAPI function to close
+ *
+ */
+void ocxl_function_close(struct ocxl_fn *fn);
+
+// Context allocation
+
+/**
+ * ocxl_context_alloc() - Allocate an OpenCAPI context
+ * @context: The OpenCAPI context to allocate, must be freed with ocxl_context_free
+ * @afu: The AFU the context belongs to
+ * @mapping: The mapping to unmap when the context is closed (may be NULL)
+ */
+int ocxl_context_alloc(struct ocxl_context **context, struct ocxl_afu *afu,
+			struct address_space *mapping);
+
+/**
+ * ocxl_context_free() - Free an OpenCAPI context
+ * @ctx: The OpenCAPI context to free
+ */
+void ocxl_context_free(struct ocxl_context *ctx);
+
+/**
+ * ocxl_context_attach() - Grant access to an MM to an OpenCAPI context
+ * @ctx: The OpenCAPI context to attach
+ * @amr: The value of the AMR register to restrict access
+ * @mm: The mm to attach to the context
+ *
+ * Returns 0 on success, negative on failure
+ */
+int ocxl_context_attach(struct ocxl_context *ctx, u64 amr,
+				struct mm_struct *mm);
+
+/**
+ * ocxl_context_detach() - Detach an MM from an OpenCAPI context
+ * @ctx: The OpenCAPI context to attach
+ *
+ * Returns 0 on success, negative on failure
+ */
+int ocxl_context_detach(struct ocxl_context *ctx);
+
+// AFU IRQs
+
+/**
+ * ocxl_afu_irq_alloc() - Allocate an IRQ associated with an AFU context
+ * @ctx: the AFU context
+ * @irq_id: out, the IRQ ID
+ *
+ * Returns 0 on success, negative on failure
+ */
+int ocxl_afu_irq_alloc(struct ocxl_context *ctx, int *irq_id);
+
+/**
+ * ocxl_afu_irq_free() - Frees an IRQ associated with an AFU context
+ * @ctx: the AFU context
+ * @irq_id: the IRQ ID
+ *
+ * Returns 0 on success, negative on failure
+ */
+int ocxl_afu_irq_free(struct ocxl_context *ctx, int irq_id);
+
+/**
+ * ocxl_afu_irq_get_addr() - Gets the address of the trigger page for an IRQ
+ * This can then be provided to an AFU which will write to that
+ * page to trigger the IRQ.
+ * @ctx: The AFU context that the IRQ is associated with
+ * @irq_id: The IRQ ID
+ *
+ * returns the trigger page address, or 0 if the IRQ is not valid
+ */
+u64 ocxl_afu_irq_get_addr(struct ocxl_context *ctx, int irq_id);
+
+/**
+ * ocxl_irq_set_handler() - Provide a callback to be called when an IRQ is triggered
+ * @ctx: The AFU context that the IRQ is associated with
+ * @irq_id: The IRQ ID
+ * @handler: the callback to be called when the IRQ is triggered
+ * @free_private: the callback to be called when the IRQ is freed (may be NULL)
+ * @private: Private data to be passed to the callbacks
+ *
+ * Returns 0 on success, negative on failure
+ */
+int ocxl_irq_set_handler(struct ocxl_context *ctx, int irq_id,
+		irqreturn_t (*handler)(void *private),
+		void (*free_private)(void *private),
+		void *private);
+
+// AFU Metadata
+
+/**
+ * ocxl_afu_config() - Get a pointer to the config for an AFU
+ * @afu: a pointer to the AFU to get the config for
+ *
+ * Returns a pointer to the AFU config
+ */
+struct ocxl_afu_config *ocxl_afu_config(struct ocxl_afu *afu);
+
+/**
+ * ocxl_afu_set_private() - Assign opaque hardware specific information to an OpenCAPI AFU.
+ * @afu: The OpenCAPI AFU
+ * @private: the opaque hardware specific information to assign to the driver
+ */
+void ocxl_afu_set_private(struct ocxl_afu *afu, void *private);
+
+/**
+ * ocxl_afu_get_private() - Fetch the hardware specific information associated with
+ * an external OpenCAPI AFU. This may be consumed by an external OpenCAPI driver.
+ * @afu: The OpenCAPI AFU
+ *
+ * Returns the opaque pointer associated with the device, or NULL if not set
+ */
+void *ocxl_afu_get_private(struct ocxl_afu *afu);
+
+// Global MMIO
+/**
+ * ocxl_global_mmio_read32() - Read a 32 bit value from global MMIO
+ * @afu: The AFU
+ * @offset: The Offset from the start of MMIO
+ * @endian: the endianness that the MMIO data is in
+ * @val: returns the value
+ *
+ * Returns 0 for success, negative on error
+ */
+int ocxl_global_mmio_read32(struct ocxl_afu *afu, size_t offset,
+			    enum ocxl_endian endian, u32 *val);
+
+/**
+ * ocxl_global_mmio_read64() - Read a 64 bit value from global MMIO
+ * @afu: The AFU
+ * @offset: The Offset from the start of MMIO
+ * @endian: the endianness that the MMIO data is in
+ * @val: returns the value
+ *
+ * Returns 0 for success, negative on error
+ */
+int ocxl_global_mmio_read64(struct ocxl_afu *afu, size_t offset,
+			    enum ocxl_endian endian, u64 *val);
+
+/**
+ * ocxl_global_mmio_write32() - Write a 32 bit value to global MMIO
+ * @afu: The AFU
+ * @offset: The Offset from the start of MMIO
+ * @endian: the endianness that the MMIO data is in
+ * @val: The value to write
+ *
+ * Returns 0 for success, negative on error
+ */
+int ocxl_global_mmio_write32(struct ocxl_afu *afu, size_t offset,
+			     enum ocxl_endian endian, u32 val);
+
+/**
+ * ocxl_global_mmio_write64() - Write a 64 bit value to global MMIO
+ * @afu: The AFU
+ * @offset: The Offset from the start of MMIO
+ * @endian: the endianness that the MMIO data is in
+ * @val: The value to write
+ *
+ * Returns 0 for success, negative on error
+ */
+int ocxl_global_mmio_write64(struct ocxl_afu *afu, size_t offset,
+			     enum ocxl_endian endian, u64 val);
+
+/**
+ * ocxl_global_mmio_set32() - Set bits in a 32 bit global MMIO register
+ * @afu: The AFU
+ * @offset: The Offset from the start of MMIO
+ * @endian: the endianness that the MMIO data is in
+ * @mask: a mask of the bits to set
+ *
+ * Returns 0 for success, negative on error
+ */
+int ocxl_global_mmio_set32(struct ocxl_afu *afu, size_t offset,
+			   enum ocxl_endian endian, u32 mask);
+
+/**
+ * ocxl_global_mmio_set64() - Set bits in a 64 bit global MMIO register
+ * @afu: The AFU
+ * @offset: The Offset from the start of MMIO
+ * @endian: the endianness that the MMIO data is in
+ * @mask: a mask of the bits to set
+ *
+ * Returns 0 for success, negative on error
+ */
+int ocxl_global_mmio_set64(struct ocxl_afu *afu, size_t offset,
+			   enum ocxl_endian endian, u64 mask);
+
+/**
+ * ocxl_global_mmio_clear32() - Set bits in a 32 bit global MMIO register
+ * @afu: The AFU
+ * @offset: The Offset from the start of MMIO
+ * @endian: the endianness that the MMIO data is in
+ * @mask: a mask of the bits to set
+ *
+ * Returns 0 for success, negative on error
+ */
+int ocxl_global_mmio_clear32(struct ocxl_afu *afu, size_t offset,
+			     enum ocxl_endian endian, u32 mask);
+
+/**
+ * ocxl_global_mmio_clear64() - Set bits in a 64 bit global MMIO register
+ * @afu: The AFU
+ * @offset: The Offset from the start of MMIO
+ * @endian: the endianness that the MMIO data is in
+ * @mask: a mask of the bits to set
+ *
+ * Returns 0 for success, negative on error
+ */
+int ocxl_global_mmio_clear64(struct ocxl_afu *afu, size_t offset,
+			     enum ocxl_endian endian, u64 mask);
+
+// Functions left here are for compatibility with the cxlflash driver
+
+/*
+ * Read the configuration space of a function for the AFU specified by
+ * the index 'afu_idx'. Fills in a ocxl_afu_config structure
+ */
+int ocxl_config_read_afu(struct pci_dev *dev,
+				struct ocxl_fn_config *fn,
+				struct ocxl_afu_config *afu,
+				u8 afu_idx);
+
+/*
+ * Tell an AFU, by writing in the configuration space, the PASIDs that
+ * it can use. Range starts at 'pasid_base' and its size is a multiple
+ * of 2
+ *
+ * 'afu_control_offset' is the offset of the AFU control DVSEC which
+ * can be found in the function configuration
+ */
+void ocxl_config_set_afu_pasid(struct pci_dev *dev,
+				int afu_control_offset,
+				int pasid_base, u32 pasid_count_log);
+
+/*
+ * Get the actag configuration for the function:
+ * 'base' is the first actag value that can be used.
+ * 'enabled' it the number of actags available, starting from base.
+ * 'supported' is the total number of actags desired by all the AFUs
+ *             of the function.
+ */
+int ocxl_config_get_actag_info(struct pci_dev *dev,
+				u16 *base, u16 *enabled, u16 *supported);
+
+/*
+ * Tell a function, by writing in the configuration space, the actags
+ * it can use.
+ *
+ * 'func_offset' is the offset of the Function DVSEC that can found in
+ * the function configuration
+ */
+void ocxl_config_set_actag(struct pci_dev *dev, int func_offset,
+				u32 actag_base, u32 actag_count);
+
+/*
+ * Tell an AFU, by writing in the configuration space, the actags it
+ * can use.
+ *
+ * 'afu_control_offset' is the offset of the AFU control DVSEC for the
+ * desired AFU. It can be found in the AFU configuration
+ */
+void ocxl_config_set_afu_actag(struct pci_dev *dev,
+				int afu_control_offset,
+				int actag_base, int actag_count);
+
+/*
+ * Enable/disable an AFU, by writing in the configuration space.
+ *
+ * 'afu_control_offset' is the offset of the AFU control DVSEC for the
+ * desired AFU. It can be found in the AFU configuration
+ */
+void ocxl_config_set_afu_state(struct pci_dev *dev,
+				int afu_control_offset, int enable);
+
+/*
+ * Set the Transaction Layer configuration in the configuration space.
+ * Only needed for function 0.
+ *
+ * It queries the host TL capabilities, find some common ground
+ * between the host and device, and set the Transaction Layer on both
+ * accordingly.
+ */
+int ocxl_config_set_TL(struct pci_dev *dev, int tl_dvsec);
+
+/*
+ * Request an AFU to terminate a PASID.
+ * Will return once the AFU has acked the request, or an error in case
+ * of timeout.
+ *
+ * The hardware can only terminate one PASID at a time, so caller must
+ * guarantee some kind of serialization.
+ *
+ * 'afu_control_offset' is the offset of the AFU control DVSEC for the
+ * desired AFU. It can be found in the AFU configuration
+ */
+int ocxl_config_terminate_pasid(struct pci_dev *dev,
+				int afu_control_offset, int pasid);
+
+/*
+ * Read the configuration space of a function and fill in a
+ * ocxl_fn_config structure with all the function details
+ */
+int ocxl_config_read_function(struct pci_dev *dev,
+				struct ocxl_fn_config *fn);
+
+/*
+ * Set up the opencapi link for the function.
+ *
+ * When called for the first time for a link, it sets up the Shared
+ * Process Area for the link and the interrupt handler to process
+ * translation faults.
+ *
+ * Returns a 'link handle' that should be used for further calls for
+ * the link
+ */
+int ocxl_link_setup(struct pci_dev *dev, int PE_mask,
+			void **link_handle);
+
+/*
+ * Remove the association between the function and its link.
+ */
+void ocxl_link_release(struct pci_dev *dev, void *link_handle);
+
+/*
+ * Add a Process Element to the Shared Process Area for a link.
+ * The process is defined by its PASID, pid, tid and its mm_struct.
+ *
+ * 'xsl_err_cb' is an optional callback if the driver wants to be
+ * notified when the translation fault interrupt handler detects an
+ * address error.
+ * 'xsl_err_data' is an argument passed to the above callback, if
+ * defined
+ */
+int ocxl_link_add_pe(void *link_handle, int pasid, u32 pidr, u32 tidr,
+		u64 amr, struct mm_struct *mm,
+		void (*xsl_err_cb)(void *data, u64 addr, u64 dsisr),
+		void *xsl_err_data);
+
+/*
+ * Remove a Process Element from the Shared Process Area for a link
+ */
+int ocxl_link_remove_pe(void *link_handle, int pasid);
+
+/*
+ * Allocate an AFU interrupt associated to the link.
+ *
+ * 'hw_irq' is the hardware interrupt number
+ */
+int ocxl_link_irq_alloc(void *link_handle, int *hw_irq);
+
+/*
+ * Free a previously allocated AFU interrupt
+ */
+void ocxl_link_free_irq(void *link_handle, int hw_irq);
+
+#endif /* _MISC_OCXL_H_ */