Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 349 insertions, 0 deletions

diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
new file mode 100644
index 000000000..25696de81
--- /dev/null
+++ b/scripts/Kbuild.include
@@ -0,0 +1,349 @@
+# SPDX-License-Identifier: GPL-2.0
+####
+# kbuild: Generic definitions
+
+# Convenient variables
+comma   := ,
+quote   := "
+squote  := '
+empty   :=
+space   := $(empty) $(empty)
+space_escape := _-_SPACE_-_
+pound := \#
+
+###
+# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
+dot-target = $(dir $@).$(notdir $@)
+
+###
+# The temporary file to save gcc -MMD generated dependencies must not
+# contain a comma
+depfile = $(subst $(comma),_,$(dot-target).d)
+
+###
+# filename of target with directory and extension stripped
+basetarget = $(basename $(notdir $@))
+
+###
+# real prerequisites without phony targets
+real-prereqs = $(filter-out $(PHONY), $^)
+
+###
+# Escape single quote for use in echo statements
+escsq = $(subst $(squote),'\$(squote)',$1)
+
+###
+# Quote a string to pass it to C files. foo => '"foo"'
+stringify = $(squote)$(quote)$1$(quote)$(squote)
+
+###
+# Easy method for doing a status message
+       kecho := :
+ quiet_kecho := echo
+silent_kecho := :
+kecho := $($(quiet)kecho)
+
+###
+# filechk is used to check if the content of a generated file is updated.
+# Sample usage:
+#
+# filechk_sample = echo $(KERNELRELEASE)
+# version.h: FORCE
+#	$(call filechk,sample)
+#
+# The rule defined shall write to stdout the content of the new file.
+# The existing file will be compared with the new one.
+# - If no file exist it is created
+# - If the content differ the new file is used
+# - If they are equal no change, and no timestamp update
+define filechk
+	$(Q)set -e;						\
+	mkdir -p $(dir $@);					\
+	trap "rm -f $(dot-target).tmp" EXIT;			\
+	{ $(filechk_$(1)); } > $(dot-target).tmp;		\
+	if [ ! -r $@ ] || ! cmp -s $@ $(dot-target).tmp; then	\
+		$(kecho) '  UPD     $@';			\
+		mv -f $(dot-target).tmp $@;			\
+	fi
+endef
+
+######
+# gcc support functions
+# See documentation in Documentation/kbuild/makefiles.rst
+
+# cc-cross-prefix
+# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
+# Return first <prefix> where a <prefix>gcc is found in PATH.
+# If no gcc found in PATH with listed prefixes return nothing
+#
+# Note: '2>/dev/null' is here to force Make to invoke a shell. Otherwise, it
+# would try to directly execute the shell builtin 'command'. This workaround
+# should be kept for a long time since this issue was fixed only after the
+# GNU Make 4.2.1 release.
+cc-cross-prefix = $(firstword $(foreach c, $(1), \
+			$(if $(shell command -v -- $(c)gcc 2>/dev/null), $(c))))
+
+# output directory for tests below
+TMPOUT = $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_$$$$
+
+# try-run
+# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise)
+# Exit code chooses option. "$$TMP" serves as a temporary file and is
+# automatically cleaned up.
+try-run = $(shell set -e;		\
+	TMP=$(TMPOUT)/tmp;		\
+	TMPO=$(TMPOUT)/tmp.o;		\
+	mkdir -p $(TMPOUT);		\
+	trap "rm -rf $(TMPOUT)" EXIT;	\
+	if ($(1)) >/dev/null 2>&1;	\
+	then echo "$(2)";		\
+	else echo "$(3)";		\
+	fi)
+
+# as-option
+# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
+
+as-option = $(call try-run,\
+	$(CC) $(KBUILD_CFLAGS) $(1) -c -x assembler /dev/null -o "$$TMP",$(1),$(2))
+
+# as-instr
+# Usage: cflags-y += $(call as-instr,instr,option1,option2)
+
+as-instr = $(call try-run,\
+	printf "%b\n" "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3))
+
+# __cc-option
+# Usage: MY_CFLAGS += $(call __cc-option,$(CC),$(MY_CFLAGS),-march=winchip-c6,-march=i586)
+__cc-option = $(call try-run,\
+	$(1) -Werror $(2) $(3) -c -x c /dev/null -o "$$TMP",$(3),$(4))
+
+# cc-option
+# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
+
+cc-option = $(call __cc-option, $(CC),\
+	$(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS),$(1),$(2))
+
+# cc-option-yn
+# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
+cc-option-yn = $(call try-run,\
+	$(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",y,n)
+
+# cc-disable-warning
+# Usage: cflags-y += $(call cc-disable-warning,unused-but-set-variable)
+cc-disable-warning = $(call try-run,\
+	$(CC) -Werror $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
+
+# cc-ifversion
+# Usage:  EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
+cc-ifversion = $(shell [ $(CONFIG_GCC_VERSION)0 $(1) $(2)000 ] && echo $(3) || echo $(4))
+
+# ld-option
+# Usage: KBUILD_LDFLAGS += $(call ld-option, -X, -Y)
+ld-option = $(call try-run, $(LD) $(KBUILD_LDFLAGS) $(1) -v,$(1),$(2),$(3))
+
+# ld-version
+# Note this is mainly for HJ Lu's 3 number binutil versions
+ld-version = $(shell $(LD) --version | $(srctree)/scripts/ld-version.sh)
+
+# ld-ifversion
+# Usage:  $(call ld-ifversion, -ge, 22252, y)
+ld-ifversion = $(shell [ $(ld-version) $(1) $(2) ] && echo $(3) || echo $(4))
+
+######
+
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
+# Usage:
+# $(Q)$(MAKE) $(build)=dir
+build := -f $(srctree)/scripts/Makefile.build obj
+
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
+# Usage:
+# $(Q)$(MAKE) $(dtbinst)=dir
+dtbinst := -f $(srctree)/scripts/Makefile.dtbinst obj
+
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(srctree)/scripts/Makefile.clean obj
+
+# echo command.
+# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
+echo-cmd = $(if $($(quiet)cmd_$(1)),\
+	echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
+
+# sink stdout for 'make -s'
+       redirect :=
+ quiet_redirect :=
+silent_redirect := exec >/dev/null;
+
+# Delete the target on interruption
+#
+# GNU Make automatically deletes the target if it has already been changed by
+# the interrupted recipe. So, you can safely stop the build by Ctrl-C (Make
+# will delete incomplete targets), and resume it later.
+#
+# However, this does not work when the stderr is piped to another program, like
+#  $ make >&2 | tee log
+# Make dies with SIGPIPE before cleaning the targets.
+#
+# To address it, we clean the target in signal traps.
+#
+# Make deletes the target when it catches SIGHUP, SIGINT, SIGQUIT, SIGTERM.
+# So, we cover them, and also SIGPIPE just in case.
+#
+# Of course, this is unneeded for phony targets.
+delete-on-interrupt = \
+	$(if $(filter-out $(PHONY), $@), \
+		$(foreach sig, HUP INT QUIT TERM PIPE, \
+			trap 'rm -f $@; trap - $(sig); kill -s $(sig) $$$$' $(sig);))
+
+# printing commands
+cmd = @set -e; $(echo-cmd) $($(quiet)redirect) $(delete-on-interrupt) $(cmd_$(1))
+
+###
+# if_changed      - execute command if any prerequisite is newer than
+#                   target, or command line has changed
+# if_changed_dep  - as if_changed, but uses fixdep to reveal dependencies
+#                   including used config symbols
+# if_changed_rule - as if_changed but execute rule instead
+# See Documentation/kbuild/makefiles.rst for more info
+
+ifneq ($(KBUILD_NOCMDDEP),1)
+# Check if both commands are the same including their order. Result is empty
+# string if equal. User may override this check using make KBUILD_NOCMDDEP=1
+cmd-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
+                         $(subst $(space),$(space_escape),$(strip $(cmd_$1))))
+else
+cmd-check = $(if $(strip $(cmd_$@)),,1)
+endif
+
+# Replace >$< with >$$< to preserve $ when reloading the .cmd file
+# (needed for make)
+# Replace >#< with >$(pound)< to avoid starting a comment in the .cmd file
+# (needed for make)
+# Replace >'< with >'\''< to be able to enclose the whole string in '...'
+# (needed for the shell)
+make-cmd = $(call escsq,$(subst $(pound),$$(pound),$(subst $$,$$$$,$(cmd_$(1)))))
+
+# Find any prerequisites that are newer than target or that do not exist.
+# (This is not true for now; $? should contain any non-existent prerequisites,
+# but it does not work as expected when .SECONDARY is present. This seems a bug
+# of GNU Make.)
+# PHONY targets skipped in both cases.
+newer-prereqs = $(filter-out $(PHONY),$?)
+
+# Execute command if command has changed or prerequisite(s) are updated.
+if_changed = $(if $(newer-prereqs)$(cmd-check),                              \
+	$(cmd);                                                              \
+	printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
+
+# Execute the command and also postprocess generated .d dependencies file.
+if_changed_dep = $(if $(newer-prereqs)$(cmd-check),$(cmd_and_fixdep),@:)
+
+cmd_and_fixdep =                                                             \
+	$(cmd);                                                              \
+	scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).cmd;\
+	rm -f $(depfile)
+
+# Usage: $(call if_changed_rule,foo)
+# Will check if $(cmd_foo) or any of the prerequisites changed,
+# and if so will execute $(rule_foo).
+if_changed_rule = $(if $(newer-prereqs)$(cmd-check),$(rule_$(1)),@:)
+
+###
+# why - tell why a target got built
+#       enabled by make V=2
+#       Output (listed in the order they are checked):
+#          (1) - due to target is PHONY
+#          (2) - due to target missing
+#          (3) - due to: file1.h file2.h
+#          (4) - due to command line change
+#          (5) - due to missing .cmd file
+#          (6) - due to target not in $(targets)
+# (1) PHONY targets are always build
+# (2) No target, so we better build it
+# (3) Prerequisite is newer than target
+# (4) The command line stored in the file named dir/.target.cmd
+#     differed from actual command line. This happens when compiler
+#     options changes
+# (5) No dir/.target.cmd file (used to store command line)
+# (6) No dir/.target.cmd file and target not listed in $(targets)
+#     This is a good hint that there is a bug in the kbuild file
+ifeq ($(KBUILD_VERBOSE),2)
+why =                                                                        \
+    $(if $(filter $@, $(PHONY)),- due to target is PHONY,                    \
+        $(if $(wildcard $@),                                                 \
+            $(if $(newer-prereqs),- due to: $(newer-prereqs),                \
+                $(if $(cmd-check),                                           \
+                    $(if $(cmd_$@),- due to command line change,             \
+                        $(if $(filter $@, $(targets)),                       \
+                            - due to missing .cmd file,                      \
+                            - due to $(notdir $@) not in $$(targets)         \
+                         )                                                   \
+                     )                                                       \
+                 )                                                           \
+             ),                                                              \
+             - due to target missing                                         \
+         )                                                                   \
+     )
+
+echo-why = $(call escsq, $(strip $(why)))
+endif
+
+###############################################################################
+#
+# When a Kconfig string contains a filename, it is suitable for
+# passing to shell commands. It is surrounded by double-quotes, and
+# any double-quotes or backslashes within it are escaped by
+# backslashes.
+#
+# This is no use for dependencies or $(wildcard). We need to strip the
+# surrounding quotes and the escaping from quotes and backslashes, and
+# we *do* need to escape any spaces in the string. So, for example:
+#
+# Usage: $(eval $(call config_filename,FOO))
+#
+# Defines FOO_FILENAME based on the contents of the CONFIG_FOO option,
+# transformed as described above to be suitable for use within the
+# makefile.
+#
+# Also, if the filename is a relative filename and exists in the source
+# tree but not the build tree, define FOO_SRCPREFIX as $(srctree)/ to
+# be prefixed to *both* command invocation and dependencies.
+#
+# Note: We also print the filenames in the quiet_cmd_foo text, and
+# perhaps ought to have a version specially escaped for that purpose.
+# But it's only cosmetic, and $(patsubst "%",%,$(CONFIG_FOO)) is good
+# enough.  It'll strip the quotes in the common case where there's no
+# space and it's a simple filename, and it'll retain the quotes when
+# there's a space. There are some esoteric cases in which it'll print
+# the wrong thing, but we don't really care. The actual dependencies
+# and commands *do* get it right, with various combinations of single
+# and double quotes, backslashes and spaces in the filenames.
+#
+###############################################################################
+#
+define config_filename
+ifneq ($$(CONFIG_$(1)),"")
+$(1)_FILENAME := $$(subst \\,\,$$(subst \$$(quote),$$(quote),$$(subst $$(space_escape),\$$(space),$$(patsubst "%",%,$$(subst $$(space),$$(space_escape),$$(CONFIG_$(1)))))))
+ifneq ($$(patsubst /%,%,$$(firstword $$($(1)_FILENAME))),$$(firstword $$($(1)_FILENAME)))
+else
+ifeq ($$(wildcard $$($(1)_FILENAME)),)
+ifneq ($$(wildcard $$(srctree)/$$($(1)_FILENAME)),)
+$(1)_SRCPREFIX := $(srctree)/
+endif
+endif
+endif
+endif
+endef
+#
+###############################################################################
+
+# delete partially updated (i.e. corrupted) files on error
+.DELETE_ON_ERROR:
+
+# do not delete intermediate files automatically
+.SECONDARY: