Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 647 insertions, 0 deletions

diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
new file mode 100755
index 000000000..dc1d3696a
--- /dev/null
+++ b/scripts/recordmcount.pl
@@ -0,0 +1,647 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0-only
+# (c) 2008, Steven Rostedt <srostedt@redhat.com>
+#
+# recordmcount.pl - makes a section called __mcount_loc that holds
+#                   all the offsets to the calls to mcount.
+#
+#
+# What we want to end up with this is that each object file will have a
+# section called __mcount_loc that will hold the list of pointers to mcount
+# callers. After final linking, the vmlinux will have within .init.data the
+# list of all callers to mcount between __start_mcount_loc and __stop_mcount_loc.
+# Later on boot up, the kernel will read this list, save the locations and turn
+# them into nops. When tracing or profiling is later enabled, these locations
+# will then be converted back to pointers to some function.
+#
+# This is no easy feat. This script is called just after the original
+# object is compiled and before it is linked.
+#
+# When parse this object file using 'objdump', the references to the call
+# sites are offsets from the section that the call site is in. Hence, all
+# functions in a section that has a call site to mcount, will have the
+# offset from the beginning of the section and not the beginning of the
+# function.
+#
+# But where this section will reside finally in vmlinx is undetermined at
+# this point. So we can't use this kind of offsets to record the final
+# address of this call site.
+#
+# The trick is to change the call offset referring the start of a section to
+# referring a function symbol in this section. During the link step, 'ld' will
+# compute the final address according to the information we record.
+#
+# e.g.
+#
+#  .section ".sched.text", "ax"
+#        [...]
+#  func1:
+#        [...]
+#        call mcount  (offset: 0x10)
+#        [...]
+#        ret
+#  .globl fun2
+#  func2:             (offset: 0x20)
+#        [...]
+#        [...]
+#        ret
+#  func3:
+#        [...]
+#        call mcount (offset: 0x30)
+#        [...]
+#
+# Both relocation offsets for the mcounts in the above example will be
+# offset from .sched.text. If we choose global symbol func2 as a reference and
+# make another file called tmp.s with the new offsets:
+#
+#  .section __mcount_loc
+#  .quad  func2 - 0x10
+#  .quad  func2 + 0x10
+#
+# We can then compile this tmp.s into tmp.o, and link it back to the original
+# object.
+#
+# In our algorithm, we will choose the first global function we meet in this
+# section as the reference. But this gets hard if there is no global functions
+# in this section. In such a case we have to select a local one. E.g. func1:
+#
+#  .section ".sched.text", "ax"
+#  func1:
+#        [...]
+#        call mcount  (offset: 0x10)
+#        [...]
+#        ret
+#  func2:
+#        [...]
+#        call mcount (offset: 0x20)
+#        [...]
+#  .section "other.section"
+#
+# If we make the tmp.s the same as above, when we link together with
+# the original object, we will end up with two symbols for func1:
+# one local, one global.  After final compile, we will end up with
+# an undefined reference to func1 or a wrong reference to another global
+# func1 in other files.
+#
+# Since local objects can reference local variables, we need to find
+# a way to make tmp.o reference the local objects of the original object
+# file after it is linked together. To do this, we convert func1
+# into a global symbol before linking tmp.o. Then after we link tmp.o
+# we will only have a single symbol for func1 that is global.
+# We can convert func1 back into a local symbol and we are done.
+#
+# Here are the steps we take:
+#
+# 1) Record all the local and weak symbols by using 'nm'
+# 2) Use objdump to find all the call site offsets and sections for
+#    mcount.
+# 3) Compile the list into its own object.
+# 4) Do we have to deal with local functions? If not, go to step 8.
+# 5) Make an object that converts these local functions to global symbols
+#    with objcopy.
+# 6) Link together this new object with the list object.
+# 7) Convert the local functions back to local symbols and rename
+#    the result as the original object.
+# 8) Link the object with the list object.
+# 9) Move the result back to the original object.
+#
+
+use warnings;
+use strict;
+
+my $P = $0;
+$P =~ s@.*/@@g;
+
+my $V = '0.1';
+
+if ($#ARGV != 11) {
+	print "usage: $P arch endian bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
+	print "version: $V\n";
+	exit(1);
+}
+
+my ($arch, $endian, $bits, $objdump, $objcopy, $cc,
+    $ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV;
+
+# This file refers to mcount and shouldn't be ftraced, so lets' ignore it
+if ($inputfile =~ m,kernel/trace/ftrace\.o$,) {
+    exit(0);
+}
+
+# Acceptable sections to record.
+my %text_sections = (
+     ".text" => 1,
+     ".init.text" => 1,
+     ".ref.text" => 1,
+     ".sched.text" => 1,
+     ".spinlock.text" => 1,
+     ".irqentry.text" => 1,
+     ".softirqentry.text" => 1,
+     ".kprobes.text" => 1,
+     ".cpuidle.text" => 1,
+     ".text.unlikely" => 1,
+);
+
+# Acceptable section-prefixes to record.
+my %text_section_prefixes = (
+     ".text." => 1,
+);
+
+# Note: we are nice to C-programmers here, thus we skip the '||='-idiom.
+$objdump = 'objdump' if (!$objdump);
+$objcopy = 'objcopy' if (!$objcopy);
+$cc = 'gcc' if (!$cc);
+$ld = 'ld' if (!$ld);
+$nm = 'nm' if (!$nm);
+$rm = 'rm' if (!$rm);
+$mv = 'mv' if (!$mv);
+
+#print STDERR "running: $P '$arch' '$objdump' '$objcopy' '$cc' '$ld' " .
+#    "'$nm' '$rm' '$mv' '$inputfile'\n";
+
+my %locals;		# List of local (static) functions
+my %weak;		# List of weak functions
+my %convert;		# List of local functions used that needs conversion
+
+my $type;
+my $local_regex;	# Match a local function (return function)
+my $weak_regex; 	# Match a weak function (return function)
+my $section_regex;	# Find the start of a section
+my $function_regex;	# Find the name of a function
+			#    (return offset and func name)
+my $mcount_regex;	# Find the call site to mcount (return offset)
+my $mcount_adjust;	# Address adjustment to mcount offset
+my $alignment;		# The .align value to use for $mcount_section
+my $section_type;	# Section header plus possible alignment command
+my $can_use_local = 0; 	# If we can use local function references
+
+# Shut up recordmcount if user has older objcopy
+my $quiet_recordmcount = ".tmp_quiet_recordmcount";
+my $print_warning = 1;
+$print_warning = 0 if ( -f $quiet_recordmcount);
+
+##
+# check_objcopy - whether objcopy supports --globalize-symbols
+#
+#  --globalize-symbols came out in 2.17, we must test the version
+#  of objcopy, and if it is less than 2.17, then we can not
+#  record local functions.
+sub check_objcopy
+{
+    open (IN, "$objcopy --version |") or die "error running $objcopy";
+    while (<IN>) {
+	if (/objcopy.*\s(\d+)\.(\d+)/) {
+	    $can_use_local = 1 if ($1 > 2 || ($1 == 2 && $2 >= 17));
+	    last;
+	}
+    }
+    close (IN);
+
+    if (!$can_use_local && $print_warning) {
+	print STDERR "WARNING: could not find objcopy version or version " .
+	    "is less than 2.17.\n" .
+	    "\tLocal function references are disabled.\n";
+	open (QUIET, ">$quiet_recordmcount");
+	printf QUIET "Disables the warning from recordmcount.pl\n";
+	close QUIET;
+    }
+}
+
+if ($arch =~ /(x86(_64)?)|(i386)/) {
+    if ($bits == 64) {
+	$arch = "x86_64";
+    } else {
+	$arch = "i386";
+    }
+}
+
+#
+# We base the defaults off of i386, the other archs may
+# feel free to change them in the below if statements.
+#
+$local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
+$weak_regex = "^[0-9a-fA-F]+\\s+([wW])\\s+(\\S+)";
+$section_regex = "Disassembly of section\\s+(\\S+):";
+$function_regex = "^([0-9a-fA-F]+)\\s+<([^^]*?)>:";
+$mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s(mcount|__fentry__)\$";
+$section_type = '@progbits';
+$mcount_adjust = 0;
+$type = ".long";
+
+if ($arch eq "x86_64") {
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s(mcount|__fentry__)([+-]0x[0-9a-zA-Z]+)?\$";
+    $type = ".quad";
+    $alignment = 8;
+    $mcount_adjust = -1;
+
+    # force flags for this arch
+    $ld .= " -m elf_x86_64";
+    $objdump .= " -M x86-64";
+    $objcopy .= " -O elf64-x86-64";
+    $cc .= " -m64";
+
+} elsif ($arch eq "i386") {
+    $alignment = 4;
+    $mcount_adjust = -1;
+
+    # force flags for this arch
+    $ld .= " -m elf_i386";
+    $objdump .= " -M i386";
+    $objcopy .= " -O elf32-i386";
+    $cc .= " -m32";
+
+} elsif ($arch eq "s390" && $bits == 64) {
+    if ($cc =~ /-DCC_USING_HOTPATCH/) {
+	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*c0 04 00 00 00 00\\s*(brcl\\s*0,|jgnop\\s*)[0-9a-f]+ <([^\+]*)>\$";
+	$mcount_adjust = 0;
+    } else {
+	$mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$";
+	$mcount_adjust = -14;
+    }
+    $alignment = 8;
+    $type = ".quad";
+    $ld .= " -m elf64_s390";
+    $cc .= " -m64";
+
+} elsif ($arch eq "sh") {
+    $alignment = 2;
+
+    # force flags for this arch
+    $ld .= " -m shlelf_linux";
+    if ($endian eq "big") {
+        $objcopy .= " -O elf32-shbig-linux";
+    } else {
+        $objcopy .= " -O elf32-sh-linux";
+    }
+
+} elsif ($arch eq "powerpc") {
+    my $ldemulation;
+
+    $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
+    # See comment in the sparc64 section for why we use '\w'.
+    $function_regex = "^([0-9a-fA-F]+)\\s+<(\\.?\\w*?)>:";
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s\\.?_mcount\$";
+
+    if ($endian eq "big") {
+	    $cc .= " -mbig-endian ";
+	    $ld .= " -EB ";
+	    $ldemulation = "ppc"
+    } else {
+	    $cc .= " -mlittle-endian ";
+	    $ld .= " -EL ";
+	    $ldemulation = "lppc"
+    }
+    if ($bits == 64) {
+        $type = ".quad";
+        $cc .= " -m64 ";
+        $ld .= " -m elf64".$ldemulation." ";
+    } else {
+        $cc .= " -m32 ";
+        $ld .= " -m elf32".$ldemulation." ";
+    }
+
+} elsif ($arch eq "arm") {
+    $alignment = 2;
+    $section_type = '%progbits';
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_ARM_(CALL|PC24|THM_CALL)" .
+			"\\s+(__gnu_mcount_nc|mcount)\$";
+
+} elsif ($arch eq "arm64") {
+    $alignment = 3;
+    $section_type = '%progbits';
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_AARCH64_CALL26\\s+_mcount\$";
+    $type = ".quad";
+} elsif ($arch eq "ia64") {
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+    $type = "data8";
+
+    if ($is_module eq "0") {
+        $cc .= " -mconstant-gp";
+    }
+} elsif ($arch eq "sparc64") {
+    # In the objdump output there are giblets like:
+    # 0000000000000000 <igmp_net_exit-0x18>:
+    # As there's some data blobs that get emitted into the
+    # text section before the first instructions and the first
+    # real symbols.  We don't want to match that, so to combat
+    # this we use '\w' so we'll match just plain symbol names,
+    # and not those that also include hex offsets inside of the
+    # '<>' brackets.  Actually the generic function_regex setting
+    # could safely use this too.
+    $function_regex = "^([0-9a-fA-F]+)\\s+<(\\w*?)>:";
+
+    # Sparc64 calls '_mcount' instead of plain 'mcount'.
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+
+    $alignment = 8;
+    $type = ".xword";
+    $ld .= " -m elf64_sparc";
+    $cc .= " -m64";
+    $objcopy .= " -O elf64-sparc";
+} elsif ($arch eq "mips") {
+    # To enable module support, we need to enable the -mlong-calls option
+    # of gcc for module, after using this option, we can not get the real
+    # offset of the calling to _mcount, but the offset of the lui
+    # instruction or the addiu one. herein, we record the address of the
+    # first one, and then we can replace this instruction by a branch
+    # instruction to jump over the profiling function to filter the
+    # indicated functions, or switch back to the lui instruction to trace
+    # them, which means dynamic tracing.
+    #
+    #       c:	3c030000 	lui	v1,0x0
+    #			c: R_MIPS_HI16	_mcount
+    #			c: R_MIPS_NONE	*ABS*
+    #			c: R_MIPS_NONE	*ABS*
+    #      10:	64630000 	daddiu	v1,v1,0
+    #			10: R_MIPS_LO16	_mcount
+    #			10: R_MIPS_NONE	*ABS*
+    #			10: R_MIPS_NONE	*ABS*
+    #      14:	03e0082d 	move	at,ra
+    #      18:	0060f809 	jalr	v1
+    #
+    # for the kernel:
+    #
+    #     10:   03e0082d        move    at,ra
+    #	  14:   0c000000        jal     0 <loongson_halt>
+    #                    14: R_MIPS_26   _mcount
+    #                    14: R_MIPS_NONE *ABS*
+    #                    14: R_MIPS_NONE *ABS*
+    #	 18:   00020021        nop
+    if ($is_module eq "0") {
+	    $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_26\\s+_mcount\$";
+    } else {
+	    $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_HI16\\s+_mcount\$";
+    }
+    $objdump .= " -Melf-trad".$endian."mips ";
+
+    if ($endian eq "big") {
+	    $endian = " -EB ";
+	    $ld .= " -melf".$bits."btsmip";
+    } else {
+	    $endian = " -EL ";
+	    $ld .= " -melf".$bits."ltsmip";
+    }
+
+    $cc .= " -mno-abicalls -fno-pic -mabi=" . $bits . $endian;
+    $ld .= $endian;
+
+    if ($bits == 64) {
+	    $function_regex =
+		"^([0-9a-fA-F]+)\\s+<(.|[^\$]L.*?|\$[^L].*?|[^\$][^L].*?)>:";
+	    $type = ".dword";
+    }
+} elsif ($arch eq "microblaze") {
+    # Microblaze calls '_mcount' instead of plain 'mcount'.
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+} elsif ($arch eq "riscv") {
+    $function_regex = "^([0-9a-fA-F]+)\\s+<([^.0-9][0-9a-zA-Z_\\.]+)>:";
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\sR_RISCV_CALL(_PLT)?\\s_?mcount\$";
+    $type = ".quad";
+    $alignment = 2;
+} elsif ($arch eq "nds32") {
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_NDS32_HI20_RELA\\s+_mcount\$";
+    $alignment = 2;
+} elsif ($arch eq "csky") {
+    $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_CKCORE_PCREL_JSR_IMM26BY2\\s+_mcount\$";
+    $alignment = 2;
+} else {
+    die "Arch $arch is not supported with CONFIG_FTRACE_MCOUNT_RECORD";
+}
+
+my $text_found = 0;
+my $read_function = 0;
+my $opened = 0;
+my $mcount_section = "__mcount_loc";
+
+my $dirname;
+my $filename;
+my $prefix;
+my $ext;
+
+if ($inputfile =~ m,^(.*)/([^/]*)$,) {
+    $dirname = $1;
+    $filename = $2;
+} else {
+    $dirname = ".";
+    $filename = $inputfile;
+}
+
+if ($filename =~ m,^(.*)(\.\S),) {
+    $prefix = $1;
+    $ext = $2;
+} else {
+    $prefix = $filename;
+    $ext = "";
+}
+
+my $mcount_s = $dirname . "/.tmp_mc_" . $prefix . ".s";
+my $mcount_o = $dirname . "/.tmp_mc_" . $prefix . ".o";
+
+check_objcopy();
+
+#
+# Step 1: find all the local (static functions) and weak symbols.
+#         't' is local, 'w/W' is weak
+#
+open (IN, "$nm $inputfile|") || die "error running $nm";
+while (<IN>) {
+    if (/$local_regex/) {
+	$locals{$1} = 1;
+    } elsif (/$weak_regex/) {
+	$weak{$2} = $1;
+    }
+}
+close(IN);
+
+my @offsets;		# Array of offsets of mcount callers
+my $ref_func;		# reference function to use for offsets
+my $offset = 0;		# offset of ref_func to section beginning
+
+##
+# update_funcs - print out the current mcount callers
+#
+#  Go through the list of offsets to callers and write them to
+#  the output file in a format that can be read by an assembler.
+#
+sub update_funcs
+{
+    return unless ($ref_func and @offsets);
+
+    # Sanity check on weak function. A weak function may be overwritten by
+    # another function of the same name, making all these offsets incorrect.
+    if (defined $weak{$ref_func}) {
+	die "$inputfile: ERROR: referencing weak function" .
+	    " $ref_func for mcount\n";
+    }
+
+    # is this function static? If so, note this fact.
+    if (defined $locals{$ref_func}) {
+
+	# only use locals if objcopy supports globalize-symbols
+	if (!$can_use_local) {
+	    return;
+	}
+	$convert{$ref_func} = 1;
+    }
+
+    # Loop through all the mcount caller offsets and print a reference
+    # to the caller based from the ref_func.
+    if (!$opened) {
+	open(FILE, ">$mcount_s") || die "can't create $mcount_s\n";
+	$opened = 1;
+	print FILE "\t.section $mcount_section,\"a\",$section_type\n";
+	print FILE "\t.align $alignment\n" if (defined($alignment));
+    }
+    foreach my $cur_offset (@offsets) {
+	printf FILE "\t%s %s + %d\n", $type, $ref_func, $cur_offset - $offset;
+    }
+}
+
+#
+# Step 2: find the sections and mcount call sites
+#
+open(IN, "LANG=C $objdump -hdr $inputfile|") || die "error running $objdump";
+
+my $text;
+
+
+# read headers first
+my $read_headers = 1;
+
+while (<IN>) {
+
+    if ($read_headers && /$mcount_section/) {
+	#
+	# Somehow the make process can execute this script on an
+	# object twice. If it does, we would duplicate the mcount
+	# section and it will cause the function tracer self test
+	# to fail. Check if the mcount section exists, and if it does,
+	# warn and exit.
+	#
+	print STDERR "ERROR: $mcount_section already in $inputfile\n" .
+	    "\tThis may be an indication that your build is corrupted.\n" .
+	    "\tDelete $inputfile and try again. If the same object file\n" .
+	    "\tstill causes an issue, then disable CONFIG_DYNAMIC_FTRACE.\n";
+	exit(-1);
+    }
+
+    # is it a section?
+    if (/$section_regex/) {
+	$read_headers = 0;
+
+	# Only record text sections that we know are safe
+	$read_function = defined($text_sections{$1});
+	if (!$read_function) {
+	    foreach my $prefix (keys %text_section_prefixes) {
+	        if (substr($1, 0, length $prefix) eq $prefix) {
+	            $read_function = 1;
+	            last;
+	        }
+	    }
+	}
+	# print out any recorded offsets
+	update_funcs();
+
+	# reset all markers and arrays
+	$text_found = 0;
+	undef($ref_func);
+	undef(@offsets);
+
+    # section found, now is this a start of a function?
+    } elsif ($read_function && /$function_regex/) {
+	$text_found = 1;
+	$text = $2;
+
+	# if this is either a local function or a weak function
+	# keep looking for functions that are global that
+	# we can use safely.
+	if (!defined($locals{$text}) && !defined($weak{$text})) {
+	    $ref_func = $text;
+	    $read_function = 0;
+	    $offset = hex $1;
+	} else {
+	    # if we already have a function, and this is weak, skip it
+	    if (!defined($ref_func) && !defined($weak{$text}) &&
+		 # PPC64 can have symbols that start with .L and
+		 # gcc considers these special. Don't use them!
+		 $text !~ /^\.L/) {
+		$ref_func = $text;
+		$offset = hex $1;
+	    }
+	}
+    }
+    # is this a call site to mcount? If so, record it to print later
+    if ($text_found && /$mcount_regex/) {
+	push(@offsets, (hex $1) + $mcount_adjust);
+    }
+}
+
+# dump out anymore offsets that may have been found
+update_funcs();
+
+# If we did not find any mcount callers, we are done (do nothing).
+if (!$opened) {
+    exit(0);
+}
+
+close(FILE);
+
+#
+# Step 3: Compile the file that holds the list of call sites to mcount.
+#
+`$cc -o $mcount_o -c $mcount_s`;
+
+my @converts = keys %convert;
+
+#
+# Step 4: Do we have sections that started with local functions?
+#
+if ($#converts >= 0) {
+    my $globallist = "";
+    my $locallist = "";
+
+    foreach my $con (@converts) {
+	$globallist .= " --globalize-symbol $con";
+	$locallist .= " --localize-symbol $con";
+    }
+
+    my $globalobj = $dirname . "/.tmp_gl_" . $filename;
+    my $globalmix = $dirname . "/.tmp_mx_" . $filename;
+
+    #
+    # Step 5: set up each local function as a global
+    #
+    `$objcopy $globallist $inputfile $globalobj`;
+
+    #
+    # Step 6: Link the global version to our list.
+    #
+    `$ld -r $globalobj $mcount_o -o $globalmix`;
+
+    #
+    # Step 7: Convert the local functions back into local symbols
+    #
+    `$objcopy $locallist $globalmix $inputfile`;
+
+    # Remove the temp files
+    `$rm $globalobj $globalmix`;
+
+} else {
+
+    my $mix = $dirname . "/.tmp_mx_" . $filename;
+
+    #
+    # Step 8: Link the object with our list of call sites object.
+    #
+    `$ld -r $inputfile $mcount_o -o $mix`;
+
+    #
+    # Step 9: Move the result back to the original object.
+    #
+    `$mv $mix $inputfile`;
+}
+
+# Clean up the temp files
+`$rm $mcount_o $mcount_s`;
+
+exit(0);