Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 272 insertions, 0 deletions

diff --git a/sound/isa/wavefront/wavefront_fx.c b/sound/isa/wavefront/wavefront_fx.c
new file mode 100644
index 000000000..3c21324b2
--- /dev/null
+++ b/sound/isa/wavefront/wavefront_fx.c
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 1998-2002 by Paul Davis <pbd@op.net>
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <sound/core.h>
+#include <sound/snd_wavefront.h>
+#include <sound/initval.h>
+
+/* Control bits for the Load Control Register
+ */
+
+#define FX_LSB_TRANSFER 0x01    /* transfer after DSP LSB byte written */
+#define FX_MSB_TRANSFER 0x02    /* transfer after DSP MSB byte written */
+#define FX_AUTO_INCR    0x04    /* auto-increment DSP address after transfer */
+
+#define WAIT_IDLE	0xff
+
+static int
+wavefront_fx_idle (snd_wavefront_t *dev)
+
+{
+	int i;
+	unsigned int x = 0x80;
+
+	for (i = 0; i < 1000; i++) {
+		x = inb (dev->fx_status);
+		if ((x & 0x80) == 0) {
+			break;
+		}
+	}
+
+	if (x & 0x80) {
+		snd_printk ("FX device never idle.\n");
+		return 0;
+	}
+
+	return (1);
+}
+
+static void
+wavefront_fx_mute (snd_wavefront_t *dev, int onoff)
+
+{
+	if (!wavefront_fx_idle(dev)) {
+		return;
+	}
+
+	outb (onoff ? 0x02 : 0x00, dev->fx_op);
+}
+
+static int
+wavefront_fx_memset (snd_wavefront_t *dev,
+		     int page,
+		     int addr,
+		     int cnt,
+		     unsigned short *data)
+{
+	if (page < 0 || page > 7) {
+		snd_printk ("FX memset: "
+			"page must be >= 0 and <= 7\n");
+		return -EINVAL;
+	}
+
+	if (addr < 0 || addr > 0x7f) {
+		snd_printk ("FX memset: "
+			"addr must be >= 0 and <= 7f\n");
+		return -EINVAL;
+	}
+
+	if (cnt == 1) {
+
+		outb (FX_LSB_TRANSFER, dev->fx_lcr);
+		outb (page, dev->fx_dsp_page);
+		outb (addr, dev->fx_dsp_addr);
+		outb ((data[0] >> 8), dev->fx_dsp_msb);
+		outb ((data[0] & 0xff), dev->fx_dsp_lsb);
+
+		snd_printk ("FX: addr %d:%x set to 0x%x\n",
+			page, addr, data[0]);
+
+	} else {
+		int i;
+
+		outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev->fx_lcr);
+		outb (page, dev->fx_dsp_page);
+		outb (addr, dev->fx_dsp_addr);
+
+		for (i = 0; i < cnt; i++) {
+			outb ((data[i] >> 8), dev->fx_dsp_msb);
+			outb ((data[i] & 0xff), dev->fx_dsp_lsb);
+			if (!wavefront_fx_idle (dev)) {
+				break;
+			}
+		}
+
+		if (i != cnt) {
+			snd_printk ("FX memset "
+				    "(0x%x, 0x%x, 0x%lx, %d) incomplete\n",
+				    page, addr, (unsigned long) data, cnt);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+int
+snd_wavefront_fx_detect (snd_wavefront_t *dev)
+
+{
+	/* This is a crude check, but its the best one I have for now.
+	   Certainly on the Maui and the Tropez, wavefront_fx_idle() will
+	   report "never idle", which suggests that this test should
+	   work OK.
+	*/
+
+	if (inb (dev->fx_status) & 0x80) {
+		snd_printk ("Hmm, probably a Maui or Tropez.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+int
+snd_wavefront_fx_open (struct snd_hwdep *hw, struct file *file)
+
+{
+	if (!try_module_get(hw->card->module))
+		return -EFAULT;
+	file->private_data = hw;
+	return 0;
+}
+
+int 
+snd_wavefront_fx_release (struct snd_hwdep *hw, struct file *file)
+
+{
+	module_put(hw->card->module);
+	return 0;
+}
+
+int
+snd_wavefront_fx_ioctl (struct snd_hwdep *sdev, struct file *file,
+			unsigned int cmd, unsigned long arg)
+
+{
+	struct snd_card *card;
+	snd_wavefront_card_t *acard;
+	snd_wavefront_t *dev;
+	wavefront_fx_info r;
+	unsigned short *page_data = NULL;
+	unsigned short *pd;
+	int err = 0;
+
+	card = sdev->card;
+	if (snd_BUG_ON(!card))
+		return -ENODEV;
+	if (snd_BUG_ON(!card->private_data))
+		return -ENODEV;
+
+	acard = card->private_data;
+	dev = &acard->wavefront;
+
+	if (copy_from_user (&r, (void __user *)arg, sizeof (wavefront_fx_info)))
+		return -EFAULT;
+
+	switch (r.request) {
+	case WFFX_MUTE:
+		wavefront_fx_mute (dev, r.data[0]);
+		return -EIO;
+
+	case WFFX_MEMSET:
+		if (r.data[2] <= 0) {
+			snd_printk ("cannot write "
+				"<= 0 bytes to FX\n");
+			return -EIO;
+		} else if (r.data[2] == 1) {
+			pd = (unsigned short *) &r.data[3];
+		} else {
+			if (r.data[2] > 256) {
+				snd_printk ("cannot write "
+					    "> 512 bytes to FX\n");
+				return -EIO;
+			}
+			page_data = memdup_user((unsigned char __user *)
+						r.data[3],
+						r.data[2] * sizeof(short));
+			if (IS_ERR(page_data))
+				return PTR_ERR(page_data);
+			pd = page_data;
+		}
+
+		err = wavefront_fx_memset (dev,
+			     r.data[0], /* page */
+			     r.data[1], /* addr */
+			     r.data[2], /* cnt */
+			     pd);
+		kfree(page_data);
+		break;
+
+	default:
+		snd_printk ("FX: ioctl %d not yet supported\n",
+			    r.request);
+		return -ENOTTY;
+	}
+	return err;
+}
+
+/* YSS225 initialization.
+
+   This code was developed using DOSEMU. The Turtle Beach SETUPSND
+   utility was run with I/O tracing in DOSEMU enabled, and a reconstruction
+   of the port I/O done, using the Yamaha faxback document as a guide
+   to add more logic to the code. Its really pretty weird.
+
+   This is the approach of just dumping the whole I/O
+   sequence as a series of port/value pairs and a simple loop
+   that outputs it.
+*/
+
+int
+snd_wavefront_fx_start (snd_wavefront_t *dev)
+{
+	unsigned int i;
+	int err;
+	const struct firmware *firmware = NULL;
+
+	if (dev->fx_initialized)
+		return 0;
+
+	err = request_firmware(&firmware, "yamaha/yss225_registers.bin",
+			       dev->card->dev);
+	if (err < 0) {
+		err = -1;
+		goto out;
+	}
+
+	for (i = 0; i + 1 < firmware->size; i += 2) {
+		if (firmware->data[i] >= 8 && firmware->data[i] < 16) {
+			outb(firmware->data[i + 1],
+			     dev->base + firmware->data[i]);
+		} else if (firmware->data[i] == WAIT_IDLE) {
+			if (!wavefront_fx_idle(dev)) {
+				err = -1;
+				goto out;
+			}
+		} else {
+			snd_printk(KERN_ERR "invalid address"
+				   " in register data\n");
+			err = -1;
+			goto out;
+		}
+	}
+
+	dev->fx_initialized = 1;
+	err = 0;
+
+out:
+	release_firmware(firmware);
+	return err;
+}
+
+MODULE_FIRMWARE("yamaha/yss225_registers.bin");