Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 256 insertions, 0 deletions

diff --git a/sound/oss/dmasound/dmasound.h b/sound/oss/dmasound/dmasound.h
new file mode 100644
index 000000000..ad8ce6a1c
--- /dev/null
+++ b/sound/oss/dmasound/dmasound.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _dmasound_h_
+/*
+ *  linux/sound/oss/dmasound/dmasound.h
+ *
+ *
+ *  Minor numbers for the sound driver.
+ *
+ *  Unfortunately Creative called the codec chip of SB as a DSP. For this
+ *  reason the /dev/dsp is reserved for digitized audio use. There is a
+ *  device for true DSP processors but it will be called something else.
+ *  In v3.0 it's /dev/sndproc but this could be a temporary solution.
+ */
+#define _dmasound_h_
+
+#include <linux/types.h>
+
+#define SND_NDEVS	256	/* Number of supported devices */
+#define SND_DEV_CTL	0	/* Control port /dev/mixer */
+#define SND_DEV_SEQ	1	/* Sequencer output /dev/sequencer (FM
+				   synthesizer and MIDI output) */
+#define SND_DEV_MIDIN	2	/* Raw midi access */
+#define SND_DEV_DSP	3	/* Digitized voice /dev/dsp */
+#define SND_DEV_AUDIO	4	/* Sparc compatible /dev/audio */
+#define SND_DEV_DSP16	5	/* Like /dev/dsp but 16 bits/sample */
+#define SND_DEV_STATUS	6	/* /dev/sndstat */
+/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
+#define SND_DEV_SEQ2	8	/* /dev/sequencer, level 2 interface */
+#define SND_DEV_SNDPROC 9	/* /dev/sndproc for programmable devices */
+#define SND_DEV_PSS	SND_DEV_SNDPROC
+
+/* switch on various prinks */
+#define DEBUG_DMASOUND 1
+
+#define MAX_AUDIO_DEV	5
+#define MAX_MIXER_DEV	4
+#define MAX_SYNTH_DEV	3
+#define MAX_MIDI_DEV	6
+#define MAX_TIMER_DEV	3
+
+#define MAX_CATCH_RADIUS	10
+
+#define le2be16(x)	(((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))
+#define le2be16dbl(x)	(((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff))
+
+#define IOCTL_IN(arg, ret) \
+	do { int error = get_user(ret, (int __user *)(arg)); \
+		if (error) return error; \
+	} while (0)
+#define IOCTL_OUT(arg, ret)	ioctl_return((int __user *)(arg), ret)
+
+static inline int ioctl_return(int __user *addr, int value)
+{
+	return value < 0 ? value : put_user(value, addr);
+}
+
+
+    /*
+     *  Configuration
+     */
+
+#undef HAS_8BIT_TABLES
+
+#if defined(CONFIG_DMASOUND_ATARI) || defined(CONFIG_DMASOUND_ATARI_MODULE) ||\
+    defined(CONFIG_DMASOUND_PAULA) || defined(CONFIG_DMASOUND_PAULA_MODULE) ||\
+    defined(CONFIG_DMASOUND_Q40) || defined(CONFIG_DMASOUND_Q40_MODULE)
+#define HAS_8BIT_TABLES
+#define MIN_BUFFERS	4
+#define MIN_BUFSIZE	(1<<12)	/* in bytes (- where does this come from ?) */
+#define MIN_FRAG_SIZE	8	/* not 100% sure about this */
+#define MAX_BUFSIZE	(1<<17)	/* Limit for Amiga is 128 kb */
+#define MAX_FRAG_SIZE	15	/* allow *4 for mono-8 => stereo-16 (for multi) */
+
+#else /* is pmac and multi is off */
+
+#define MIN_BUFFERS	2
+#define MIN_BUFSIZE	(1<<8)	/* in bytes */
+#define MIN_FRAG_SIZE	8
+#define MAX_BUFSIZE	(1<<18)	/* this is somewhat arbitrary for pmac */
+#define MAX_FRAG_SIZE	16	/* need to allow *4 for mono-8 => stereo-16 */
+#endif
+
+#define DEFAULT_N_BUFFERS 4
+#define DEFAULT_BUFF_SIZE (1<<15)
+
+    /*
+     *  Initialization
+     */
+
+extern int dmasound_init(void);
+extern void dmasound_deinit(void);
+
+/* description of the set-up applies to either hard or soft settings */
+
+typedef struct {
+    int format;		/* AFMT_* */
+    int stereo;		/* 0 = mono, 1 = stereo */
+    int size;		/* 8/16 bit*/
+    int speed;		/* speed */
+} SETTINGS;
+
+    /*
+     *  Machine definitions
+     */
+
+typedef struct {
+    const char *name;
+    const char *name2;
+    struct module *owner;
+    void *(*dma_alloc)(unsigned int, gfp_t);
+    void (*dma_free)(void *, unsigned int);
+    int (*irqinit)(void);
+    void (*irqcleanup)(void);
+    void (*init)(void);
+    void (*silence)(void);
+    int (*setFormat)(int);
+    int (*setVolume)(int);
+    int (*setBass)(int);
+    int (*setTreble)(int);
+    int (*setGain)(int);
+    void (*play)(void);
+    void (*record)(void);		/* optional */
+    void (*mixer_init)(void);		/* optional */
+    int (*mixer_ioctl)(u_int, u_long);	/* optional */
+    int (*write_sq_setup)(void);	/* optional */
+    int (*read_sq_setup)(void);		/* optional */
+    int (*sq_open)(fmode_t);		/* optional */
+    int (*state_info)(char *, size_t);	/* optional */
+    void (*abort_read)(void);		/* optional */
+    int min_dsp_speed;
+    int max_dsp_speed;
+    int version ;
+    int hardware_afmts ;		/* OSS says we only return h'ware info */
+					/* when queried via SNDCTL_DSP_GETFMTS */
+    int capabilities ;		/* low-level reply to SNDCTL_DSP_GETCAPS */
+    SETTINGS default_hard ;	/* open() or init() should set something valid */
+    SETTINGS default_soft ;	/* you can make it look like old OSS, if you want to */
+} MACHINE;
+
+    /*
+     *  Low level stuff
+     */
+
+typedef struct {
+    ssize_t (*ct_ulaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
+    ssize_t (*ct_alaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
+    ssize_t (*ct_s8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
+    ssize_t (*ct_u8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
+    ssize_t (*ct_s16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
+    ssize_t (*ct_u16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
+    ssize_t (*ct_s16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
+    ssize_t (*ct_u16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
+} TRANS;
+
+struct sound_settings {
+    MACHINE mach;	/* machine dependent things */
+    SETTINGS hard;	/* hardware settings */
+    SETTINGS soft;	/* software settings */
+    SETTINGS dsp;	/* /dev/dsp default settings */
+    TRANS *trans_write;	/* supported translations */
+    int volume_left;	/* volume (range is machine dependent) */
+    int volume_right;
+    int bass;		/* tone (range is machine dependent) */
+    int treble;
+    int gain;
+    int minDev;		/* minor device number currently open */
+    spinlock_t lock;
+};
+
+extern struct sound_settings dmasound;
+
+#ifdef HAS_8BIT_TABLES
+extern char dmasound_ulaw2dma8[];
+extern char dmasound_alaw2dma8[];
+#endif
+
+    /*
+     *  Mid level stuff
+     */
+
+static inline int dmasound_set_volume(int volume)
+{
+	return dmasound.mach.setVolume(volume);
+}
+
+static inline int dmasound_set_bass(int bass)
+{
+	return dmasound.mach.setBass ? dmasound.mach.setBass(bass) : 50;
+}
+
+static inline int dmasound_set_treble(int treble)
+{
+	return dmasound.mach.setTreble ? dmasound.mach.setTreble(treble) : 50;
+}
+
+static inline int dmasound_set_gain(int gain)
+{
+	return dmasound.mach.setGain ? dmasound.mach.setGain(gain) : 100;
+}
+
+
+    /*
+     * Sound queue stuff, the heart of the driver
+     */
+
+struct sound_queue {
+    /* buffers allocated for this queue */
+    int numBufs;		/* real limits on what the user can have */
+    int bufSize;		/* in bytes */
+    char **buffers;
+
+    /* current parameters */
+    int locked ;		/* params cannot be modified when != 0 */
+    int user_frags ;		/* user requests this many */
+    int user_frag_size ;	/* of this size */
+    int max_count;		/* actual # fragments <= numBufs */
+    int block_size;		/* internal block size in bytes */
+    int max_active;		/* in-use fragments <= max_count */
+
+    /* it shouldn't be necessary to declare any of these volatile */
+    int front, rear, count;
+    int rear_size;
+    /*
+     *	The use of the playing field depends on the hardware
+     *
+     *	Atari, PMac: The number of frames that are loaded/playing
+     *
+     *	Amiga: Bit 0 is set: a frame is loaded
+     *	       Bit 1 is set: a frame is playing
+     */
+    int active;
+    wait_queue_head_t action_queue, open_queue, sync_queue;
+    int non_blocking;
+    int busy, syncing, xruns, died;
+};
+
+#define WAKE_UP(queue)		(wake_up_interruptible(&queue))
+
+extern struct sound_queue dmasound_write_sq;
+#define write_sq	dmasound_write_sq
+
+extern int dmasound_catchRadius;
+#define catchRadius	dmasound_catchRadius
+
+/* define the value to be put in the byte-swap reg in mac-io
+   when we want it to swap for us.
+*/
+#define BS_VAL 1
+
+#define SW_INPUT_VOLUME_SCALE	4
+#define SW_INPUT_VOLUME_DEFAULT	(128 / SW_INPUT_VOLUME_SCALE)
+
+extern int expand_read_bal;	/* Balance factor for reading */
+extern uint software_input_volume; /* software implemented recording volume! */
+
+#endif /* _dmasound_h_ */