Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 636 insertions, 0 deletions

diff --git a/sound/soc/codecs/rt5677-spi.c b/sound/soc/codecs/rt5677-spi.c
new file mode 100644
index 000000000..8f3993a4c
--- /dev/null
+++ b/sound/soc/codecs/rt5677-spi.c
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * rt5677-spi.c  --  RT5677 ALSA SoC audio codec driver
+ *
+ * Copyright 2013 Realtek Semiconductor Corp.
+ * Author: Oder Chiou <oder_chiou@realtek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_qos.h>
+#include <linux/sysfs.h>
+#include <linux/clk.h>
+#include <linux/firmware.h>
+#include <linux/acpi.h>
+
+#include <sound/soc.h>
+
+#include "rt5677.h"
+#include "rt5677-spi.h"
+
+#define DRV_NAME "rt5677spi"
+
+#define RT5677_SPI_BURST_LEN	240
+#define RT5677_SPI_HEADER	5
+#define RT5677_SPI_FREQ		6000000
+
+/* The AddressPhase and DataPhase of SPI commands are MSB first on the wire.
+ * DataPhase word size of 16-bit commands is 2 bytes.
+ * DataPhase word size of 32-bit commands is 4 bytes.
+ * DataPhase word size of burst commands is 8 bytes.
+ * The DSP CPU is little-endian.
+ */
+#define RT5677_SPI_WRITE_BURST	0x5
+#define RT5677_SPI_READ_BURST	0x4
+#define RT5677_SPI_WRITE_32	0x3
+#define RT5677_SPI_READ_32	0x2
+#define RT5677_SPI_WRITE_16	0x1
+#define RT5677_SPI_READ_16	0x0
+
+#define RT5677_BUF_BYTES_TOTAL		0x20000
+#define RT5677_MIC_BUF_ADDR		0x60030000
+#define RT5677_MODEL_ADDR		0x5FFC9800
+#define RT5677_MIC_BUF_BYTES		((u32)(RT5677_BUF_BYTES_TOTAL - \
+					sizeof(u32)))
+#define RT5677_MIC_BUF_FIRST_READ_SIZE	0x10000
+
+static struct spi_device *g_spi;
+static DEFINE_MUTEX(spi_mutex);
+
+struct rt5677_dsp {
+	struct device *dev;
+	struct delayed_work copy_work;
+	struct mutex dma_lock;
+	struct snd_pcm_substream *substream;
+	size_t dma_offset;	/* zero-based offset into runtime->dma_area */
+	size_t avail_bytes;	/* number of new bytes since last period */
+	u32 mic_read_offset;	/* zero-based offset into DSP's mic buffer */
+	bool new_hotword;	/* a new hotword is fired */
+};
+
+static const struct snd_pcm_hardware rt5677_spi_pcm_hardware = {
+	.info			= SNDRV_PCM_INFO_MMAP |
+				  SNDRV_PCM_INFO_MMAP_VALID |
+				  SNDRV_PCM_INFO_INTERLEAVED,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
+	.period_bytes_min	= PAGE_SIZE,
+	.period_bytes_max	= RT5677_BUF_BYTES_TOTAL / 8,
+	.periods_min		= 8,
+	.periods_max		= 8,
+	.channels_min		= 1,
+	.channels_max		= 1,
+	.buffer_bytes_max	= RT5677_BUF_BYTES_TOTAL,
+};
+
+static struct snd_soc_dai_driver rt5677_spi_dai = {
+	/* The DAI name "rt5677-dsp-cpu-dai" is not used. The actual DAI name
+	 * registered with ASoC is the name of the device "spi-RT5677AA:00",
+	 * because we only have one DAI. See snd_soc_register_dais().
+	 */
+	.name = "rt5677-dsp-cpu-dai",
+	.id = 0,
+	.capture = {
+		.stream_name = "DSP Capture",
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_16000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+};
+
+/* PCM for streaming audio from the DSP buffer */
+static int rt5677_spi_pcm_open(
+		struct snd_soc_component *component,
+		struct snd_pcm_substream *substream)
+{
+	snd_soc_set_runtime_hwparams(substream, &rt5677_spi_pcm_hardware);
+	return 0;
+}
+
+static int rt5677_spi_pcm_close(
+		struct snd_soc_component *component,
+		struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_component *codec_component =
+			snd_soc_rtdcom_lookup(rtd, "rt5677");
+	struct rt5677_priv *rt5677 =
+			snd_soc_component_get_drvdata(codec_component);
+	struct rt5677_dsp *rt5677_dsp =
+			snd_soc_component_get_drvdata(component);
+
+	cancel_delayed_work_sync(&rt5677_dsp->copy_work);
+	rt5677->set_dsp_vad(codec_component, false);
+	return 0;
+}
+
+static int rt5677_spi_hw_params(
+		struct snd_soc_component *component,
+		struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *hw_params)
+{
+	struct rt5677_dsp *rt5677_dsp =
+			snd_soc_component_get_drvdata(component);
+
+	mutex_lock(&rt5677_dsp->dma_lock);
+	rt5677_dsp->substream = substream;
+	mutex_unlock(&rt5677_dsp->dma_lock);
+
+	return 0;
+}
+
+static int rt5677_spi_hw_free(
+		struct snd_soc_component *component,
+		struct snd_pcm_substream *substream)
+{
+	struct rt5677_dsp *rt5677_dsp =
+			snd_soc_component_get_drvdata(component);
+
+	mutex_lock(&rt5677_dsp->dma_lock);
+	rt5677_dsp->substream = NULL;
+	mutex_unlock(&rt5677_dsp->dma_lock);
+
+	return 0;
+}
+
+static int rt5677_spi_prepare(
+		struct snd_soc_component *component,
+		struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_component *rt5677_component =
+			snd_soc_rtdcom_lookup(rtd, "rt5677");
+	struct rt5677_priv *rt5677 =
+			snd_soc_component_get_drvdata(rt5677_component);
+	struct rt5677_dsp *rt5677_dsp =
+			snd_soc_component_get_drvdata(component);
+
+	rt5677->set_dsp_vad(rt5677_component, true);
+	rt5677_dsp->dma_offset = 0;
+	rt5677_dsp->avail_bytes = 0;
+	return 0;
+}
+
+static snd_pcm_uframes_t rt5677_spi_pcm_pointer(
+		struct snd_soc_component *component,
+		struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct rt5677_dsp *rt5677_dsp =
+			snd_soc_component_get_drvdata(component);
+
+	return bytes_to_frames(runtime, rt5677_dsp->dma_offset);
+}
+
+static int rt5677_spi_mic_write_offset(u32 *mic_write_offset)
+{
+	int ret;
+	/* Grab the first 4 bytes that hold the write pointer on the
+	 * dsp, and check to make sure that it points somewhere inside the
+	 * buffer.
+	 */
+	ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR, mic_write_offset,
+			sizeof(u32));
+	if (ret)
+		return ret;
+	/* Adjust the offset so that it's zero-based */
+	*mic_write_offset = *mic_write_offset - sizeof(u32);
+	return *mic_write_offset < RT5677_MIC_BUF_BYTES ? 0 : -EFAULT;
+}
+
+/*
+ * Copy one contiguous block of audio samples from the DSP mic buffer to the
+ * dma_area of the pcm runtime. The receiving buffer may wrap around.
+ * @begin: start offset of the block to copy, in bytes.
+ * @end:   offset of the first byte after the block to copy, must be greater
+ *         than or equal to begin.
+ *
+ * Return: Zero if successful, or a negative error code on failure.
+ */
+static int rt5677_spi_copy_block(struct rt5677_dsp *rt5677_dsp,
+		u32 begin, u32 end)
+{
+	struct snd_pcm_runtime *runtime = rt5677_dsp->substream->runtime;
+	size_t bytes_per_frame = frames_to_bytes(runtime, 1);
+	size_t first_chunk_len, second_chunk_len;
+	int ret;
+
+	if (begin > end || runtime->dma_bytes < 2 * bytes_per_frame) {
+		dev_err(rt5677_dsp->dev,
+			"Invalid copy from (%u, %u), dma_area size %zu\n",
+			begin, end, runtime->dma_bytes);
+		return -EINVAL;
+	}
+
+	/* The block to copy is empty */
+	if (begin == end)
+		return 0;
+
+	/* If the incoming chunk is too big for the receiving buffer, only the
+	 * last "receiving buffer size - one frame" bytes are copied.
+	 */
+	if (end - begin > runtime->dma_bytes - bytes_per_frame)
+		begin = end - (runtime->dma_bytes - bytes_per_frame);
+
+	/* May need to split to two chunks, calculate the size of each */
+	first_chunk_len = end - begin;
+	second_chunk_len = 0;
+	if (rt5677_dsp->dma_offset + first_chunk_len > runtime->dma_bytes) {
+		/* Receiving buffer wrapped around */
+		second_chunk_len = first_chunk_len;
+		first_chunk_len = runtime->dma_bytes - rt5677_dsp->dma_offset;
+		second_chunk_len -= first_chunk_len;
+	}
+
+	/* Copy first chunk */
+	ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR + sizeof(u32) + begin,
+			runtime->dma_area + rt5677_dsp->dma_offset,
+			first_chunk_len);
+	if (ret)
+		return ret;
+	rt5677_dsp->dma_offset += first_chunk_len;
+	if (rt5677_dsp->dma_offset == runtime->dma_bytes)
+		rt5677_dsp->dma_offset = 0;
+
+	/* Copy second chunk */
+	if (second_chunk_len) {
+		ret = rt5677_spi_read(RT5677_MIC_BUF_ADDR + sizeof(u32) +
+				begin + first_chunk_len, runtime->dma_area,
+				second_chunk_len);
+		if (!ret)
+			rt5677_dsp->dma_offset = second_chunk_len;
+	}
+	return ret;
+}
+
+/*
+ * Copy a given amount of audio samples from the DSP mic buffer starting at
+ * mic_read_offset, to the dma_area of the pcm runtime. The source buffer may
+ * wrap around. mic_read_offset is updated after successful copy.
+ * @amount: amount of samples to copy, in bytes.
+ *
+ * Return: Zero if successful, or a negative error code on failure.
+ */
+static int rt5677_spi_copy(struct rt5677_dsp *rt5677_dsp, u32 amount)
+{
+	int ret = 0;
+	u32 target;
+
+	if (amount == 0)
+		return ret;
+
+	target = rt5677_dsp->mic_read_offset + amount;
+	/* Copy the first chunk in DSP's mic buffer */
+	ret |= rt5677_spi_copy_block(rt5677_dsp, rt5677_dsp->mic_read_offset,
+			min(target, RT5677_MIC_BUF_BYTES));
+
+	if (target >= RT5677_MIC_BUF_BYTES) {
+		/* Wrap around, copy the second chunk */
+		target -= RT5677_MIC_BUF_BYTES;
+		ret |= rt5677_spi_copy_block(rt5677_dsp, 0, target);
+	}
+
+	if (!ret)
+		rt5677_dsp->mic_read_offset = target;
+	return ret;
+}
+
+/*
+ * A delayed work that streams audio samples from the DSP mic buffer to the
+ * dma_area of the pcm runtime via SPI.
+ */
+static void rt5677_spi_copy_work(struct work_struct *work)
+{
+	struct rt5677_dsp *rt5677_dsp =
+		container_of(work, struct rt5677_dsp, copy_work.work);
+	struct snd_pcm_runtime *runtime;
+	u32 mic_write_offset;
+	size_t new_bytes, copy_bytes, period_bytes;
+	unsigned int delay;
+	int ret = 0;
+
+	/* Ensure runtime->dma_area buffer does not go away while copying. */
+	mutex_lock(&rt5677_dsp->dma_lock);
+	if (!rt5677_dsp->substream) {
+		dev_err(rt5677_dsp->dev, "No pcm substream\n");
+		goto done;
+	}
+
+	runtime = rt5677_dsp->substream->runtime;
+
+	if (rt5677_spi_mic_write_offset(&mic_write_offset)) {
+		dev_err(rt5677_dsp->dev, "No mic_write_offset\n");
+		goto done;
+	}
+
+	/* If this is the first time that we've asked for streaming data after
+	 * a hotword is fired, we should start reading from the previous 2
+	 * seconds of audio from wherever the mic_write_offset is currently.
+	 */
+	if (rt5677_dsp->new_hotword) {
+		rt5677_dsp->new_hotword = false;
+		/* See if buffer wraparound happens */
+		if (mic_write_offset < RT5677_MIC_BUF_FIRST_READ_SIZE)
+			rt5677_dsp->mic_read_offset = RT5677_MIC_BUF_BYTES -
+					(RT5677_MIC_BUF_FIRST_READ_SIZE -
+					mic_write_offset);
+		else
+			rt5677_dsp->mic_read_offset = mic_write_offset -
+					RT5677_MIC_BUF_FIRST_READ_SIZE;
+	}
+
+	/* Calculate the amount of new samples in bytes */
+	if (rt5677_dsp->mic_read_offset <= mic_write_offset)
+		new_bytes = mic_write_offset - rt5677_dsp->mic_read_offset;
+	else
+		new_bytes = RT5677_MIC_BUF_BYTES + mic_write_offset
+				- rt5677_dsp->mic_read_offset;
+
+	/* Copy all new samples from DSP mic buffer, one period at a time */
+	period_bytes = snd_pcm_lib_period_bytes(rt5677_dsp->substream);
+	while (new_bytes) {
+		copy_bytes = min(new_bytes, period_bytes
+				- rt5677_dsp->avail_bytes);
+		ret = rt5677_spi_copy(rt5677_dsp, copy_bytes);
+		if (ret) {
+			dev_err(rt5677_dsp->dev, "Copy failed %d\n", ret);
+			goto done;
+		}
+		rt5677_dsp->avail_bytes += copy_bytes;
+		if (rt5677_dsp->avail_bytes >= period_bytes) {
+			snd_pcm_period_elapsed(rt5677_dsp->substream);
+			rt5677_dsp->avail_bytes = 0;
+		}
+		new_bytes -= copy_bytes;
+	}
+
+	delay = bytes_to_frames(runtime, period_bytes) / (runtime->rate / 1000);
+	schedule_delayed_work(&rt5677_dsp->copy_work, msecs_to_jiffies(delay));
+done:
+	mutex_unlock(&rt5677_dsp->dma_lock);
+}
+
+static int rt5677_spi_pcm_new(struct snd_soc_component *component,
+			      struct snd_soc_pcm_runtime *rtd)
+{
+	snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_VMALLOC,
+				       NULL, 0, 0);
+	return 0;
+}
+
+static int rt5677_spi_pcm_probe(struct snd_soc_component *component)
+{
+	struct rt5677_dsp *rt5677_dsp;
+
+	rt5677_dsp = devm_kzalloc(component->dev, sizeof(*rt5677_dsp),
+			GFP_KERNEL);
+	if (!rt5677_dsp)
+		return -ENOMEM;
+	rt5677_dsp->dev = &g_spi->dev;
+	mutex_init(&rt5677_dsp->dma_lock);
+	INIT_DELAYED_WORK(&rt5677_dsp->copy_work, rt5677_spi_copy_work);
+
+	snd_soc_component_set_drvdata(component, rt5677_dsp);
+	return 0;
+}
+
+static const struct snd_soc_component_driver rt5677_spi_dai_component = {
+	.name		= DRV_NAME,
+	.probe		= rt5677_spi_pcm_probe,
+	.open		= rt5677_spi_pcm_open,
+	.close		= rt5677_spi_pcm_close,
+	.hw_params	= rt5677_spi_hw_params,
+	.hw_free	= rt5677_spi_hw_free,
+	.prepare	= rt5677_spi_prepare,
+	.pointer	= rt5677_spi_pcm_pointer,
+	.pcm_construct	= rt5677_spi_pcm_new,
+};
+
+/* Select a suitable transfer command for the next transfer to ensure
+ * the transfer address is always naturally aligned while minimizing
+ * the total number of transfers required.
+ *
+ * 3 transfer commands are available:
+ * RT5677_SPI_READ/WRITE_16:	Transfer 2 bytes
+ * RT5677_SPI_READ/WRITE_32:	Transfer 4 bytes
+ * RT5677_SPI_READ/WRITE_BURST:	Transfer any multiples of 8 bytes
+ *
+ * Note:
+ * 16 Bit writes and reads are restricted to the address range
+ * 0x18020000 ~ 0x18021000
+ *
+ * For example, reading 256 bytes at 0x60030004 uses the following commands:
+ * 0x60030004 RT5677_SPI_READ_32	4 bytes
+ * 0x60030008 RT5677_SPI_READ_BURST	240 bytes
+ * 0x600300F8 RT5677_SPI_READ_BURST	8 bytes
+ * 0x60030100 RT5677_SPI_READ_32	4 bytes
+ *
+ * Input:
+ * @read: true for read commands; false for write commands
+ * @align: alignment of the next transfer address
+ * @remain: number of bytes remaining to transfer
+ *
+ * Output:
+ * @len: number of bytes to transfer with the selected command
+ * Returns the selected command
+ */
+static u8 rt5677_spi_select_cmd(bool read, u32 align, u32 remain, u32 *len)
+{
+	u8 cmd;
+
+	if (align == 4 || remain <= 4) {
+		cmd = RT5677_SPI_READ_32;
+		*len = 4;
+	} else {
+		cmd = RT5677_SPI_READ_BURST;
+		*len = (((remain - 1) >> 3) + 1) << 3;
+		*len = min_t(u32, *len, RT5677_SPI_BURST_LEN);
+	}
+	return read ? cmd : cmd + 1;
+}
+
+/* Copy dstlen bytes from src to dst, while reversing byte order for each word.
+ * If srclen < dstlen, zeros are padded.
+ */
+static void rt5677_spi_reverse(u8 *dst, u32 dstlen, const u8 *src, u32 srclen)
+{
+	u32 w, i, si;
+	u32 word_size = min_t(u32, dstlen, 8);
+
+	for (w = 0; w < dstlen; w += word_size) {
+		for (i = 0; i < word_size && i + w < dstlen; i++) {
+			si = w + word_size - i - 1;
+			dst[w + i] = si < srclen ? src[si] : 0;
+		}
+	}
+}
+
+/* Read DSP address space using SPI. addr and len have to be 4-byte aligned. */
+int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
+{
+	u32 offset;
+	int status = 0;
+	struct spi_transfer t[2];
+	struct spi_message m;
+	/* +4 bytes is for the DummyPhase following the AddressPhase */
+	u8 header[RT5677_SPI_HEADER + 4];
+	u8 body[RT5677_SPI_BURST_LEN];
+	u8 spi_cmd;
+	u8 *cb = rxbuf;
+
+	if (!g_spi)
+		return -ENODEV;
+
+	if ((addr & 3) || (len & 3)) {
+		dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len);
+		return -EACCES;
+	}
+
+	memset(t, 0, sizeof(t));
+	t[0].tx_buf = header;
+	t[0].len = sizeof(header);
+	t[0].speed_hz = RT5677_SPI_FREQ;
+	t[1].rx_buf = body;
+	t[1].speed_hz = RT5677_SPI_FREQ;
+	spi_message_init_with_transfers(&m, t, ARRAY_SIZE(t));
+
+	for (offset = 0; offset < len; offset += t[1].len) {
+		spi_cmd = rt5677_spi_select_cmd(true, (addr + offset) & 7,
+				len - offset, &t[1].len);
+
+		/* Construct SPI message header */
+		header[0] = spi_cmd;
+		header[1] = ((addr + offset) & 0xff000000) >> 24;
+		header[2] = ((addr + offset) & 0x00ff0000) >> 16;
+		header[3] = ((addr + offset) & 0x0000ff00) >> 8;
+		header[4] = ((addr + offset) & 0x000000ff) >> 0;
+
+		mutex_lock(&spi_mutex);
+		status |= spi_sync(g_spi, &m);
+		mutex_unlock(&spi_mutex);
+
+
+		/* Copy data back to caller buffer */
+		rt5677_spi_reverse(cb + offset, len - offset, body, t[1].len);
+	}
+	return status;
+}
+EXPORT_SYMBOL_GPL(rt5677_spi_read);
+
+/* Write DSP address space using SPI. addr has to be 4-byte aligned.
+ * If len is not 4-byte aligned, then extra zeros are written at the end
+ * as padding.
+ */
+int rt5677_spi_write(u32 addr, const void *txbuf, size_t len)
+{
+	u32 offset;
+	int status = 0;
+	struct spi_transfer t;
+	struct spi_message m;
+	/* +1 byte is for the DummyPhase following the DataPhase */
+	u8 buf[RT5677_SPI_HEADER + RT5677_SPI_BURST_LEN + 1];
+	u8 *body = buf + RT5677_SPI_HEADER;
+	u8 spi_cmd;
+	const u8 *cb = txbuf;
+
+	if (!g_spi)
+		return -ENODEV;
+
+	if (addr & 3) {
+		dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len);
+		return -EACCES;
+	}
+
+	memset(&t, 0, sizeof(t));
+	t.tx_buf = buf;
+	t.speed_hz = RT5677_SPI_FREQ;
+	spi_message_init_with_transfers(&m, &t, 1);
+
+	for (offset = 0; offset < len;) {
+		spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7,
+				len - offset, &t.len);
+
+		/* Construct SPI message header */
+		buf[0] = spi_cmd;
+		buf[1] = ((addr + offset) & 0xff000000) >> 24;
+		buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
+		buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
+		buf[4] = ((addr + offset) & 0x000000ff) >> 0;
+
+		/* Fetch data from caller buffer */
+		rt5677_spi_reverse(body, t.len, cb + offset, len - offset);
+		offset += t.len;
+		t.len += RT5677_SPI_HEADER + 1;
+
+		mutex_lock(&spi_mutex);
+		status |= spi_sync(g_spi, &m);
+		mutex_unlock(&spi_mutex);
+	}
+	return status;
+}
+EXPORT_SYMBOL_GPL(rt5677_spi_write);
+
+int rt5677_spi_write_firmware(u32 addr, const struct firmware *fw)
+{
+	return rt5677_spi_write(addr, fw->data, fw->size);
+}
+EXPORT_SYMBOL_GPL(rt5677_spi_write_firmware);
+
+void rt5677_spi_hotword_detected(void)
+{
+	struct rt5677_dsp *rt5677_dsp;
+
+	if (!g_spi)
+		return;
+
+	rt5677_dsp = dev_get_drvdata(&g_spi->dev);
+	if (!rt5677_dsp) {
+		dev_err(&g_spi->dev, "Can't get rt5677_dsp\n");
+		return;
+	}
+
+	mutex_lock(&rt5677_dsp->dma_lock);
+	dev_info(rt5677_dsp->dev, "Hotword detected\n");
+	rt5677_dsp->new_hotword = true;
+	mutex_unlock(&rt5677_dsp->dma_lock);
+
+	schedule_delayed_work(&rt5677_dsp->copy_work, 0);
+}
+EXPORT_SYMBOL_GPL(rt5677_spi_hotword_detected);
+
+static int rt5677_spi_probe(struct spi_device *spi)
+{
+	int ret;
+
+	g_spi = spi;
+
+	ret = devm_snd_soc_register_component(&spi->dev,
+					      &rt5677_spi_dai_component,
+					      &rt5677_spi_dai, 1);
+	if (ret < 0)
+		dev_err(&spi->dev, "Failed to register component.\n");
+
+	return ret;
+}
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id rt5677_spi_acpi_id[] = {
+	{ "RT5677AA", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, rt5677_spi_acpi_id);
+#endif
+
+static struct spi_driver rt5677_spi_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.acpi_match_table = ACPI_PTR(rt5677_spi_acpi_id),
+	},
+	.probe = rt5677_spi_probe,
+};
+module_spi_driver(rt5677_spi_driver);
+
+MODULE_DESCRIPTION("ASoC RT5677 SPI driver");
+MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
+MODULE_LICENSE("GPL v2");