diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh')
-rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh | 419 |
1 files changed, 419 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh new file mode 100755 index 000000000..56761de1c --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh @@ -0,0 +1,419 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test injects a 10-MB burst of traffic with VLAN tag and 802.1p priority +# of 1. This stream is consistently prioritized as priority 1, is put to PG +# buffer 1, and scheduled at TC 1. +# +# - the stream first ingresses through $swp1, where it is forwarded to $swp3 +# +# - then it ingresses through $swp4. Here it is put to a lossless buffer and put +# to a small pool ("PFC pool"). The traffic is forwarded to $swp2, which is +# shaped, and thus the PFC pool eventually fills, therefore the headroom +# fills, and $swp3 is paused. +# +# - since $swp3 now can't send traffic, the traffic ingressing $swp1 is kept at +# a pool ("overflow pool"). The overflow pool needs to be large enough to +# contain the whole burst. +# +# - eventually the PFC pool gets some traffic out, headroom therefore gets some +# traffic to the pool, and $swp3 is unpaused again. This way the traffic is +# gradually forwarded from the overflow pool, through the PFC pool, out of +# $swp2, and eventually to $h2. +# +# - if PFC works, all lossless flow packets that ingress through $swp1 should +# also be seen ingressing $h2. If it doesn't, there will be drops due to +# discrepancy between the speeds of $swp1 and $h2. +# +# - it should all play out relatively quickly, so that SLL and HLL will not +# cause drops. +# +# +-----------------------+ +# | H1 | +# | + $h1.111 | +# | | 192.0.2.33/28 | +# | | | +# | + $h1 | +# +---|-------------------+ +--------------------+ +# | | | +# +---|----------------------|--------------------|---------------------------+ +# | + $swp1 $swp3 + + $swp4 | +# | | iPOOL1 iPOOL0 | | iPOOL2 | +# | | ePOOL4 ePOOL5 | | ePOOL4 | +# | | 1Gbps | | 1Gbps | +# | | PFC:enabled=1 | | PFC:enabled=1 | +# | +-|----------------------|-+ +-|------------------------+ | +# | | + $swp1.111 $swp3.111 + | | + $swp4.111 | | +# | | | | | | +# | | BR1 | | BR2 | | +# | | | | | | +# | | | | + $swp2.111 | | +# | +--------------------------+ +---------|----------------+ | +# | | | +# | iPOOL0: 500KB dynamic | | +# | iPOOL1: 10MB static | | +# | iPOOL2: 1MB static + $swp2 | +# | ePOOL4: 500KB dynamic | iPOOL0 | +# | ePOOL5: 10MB static | ePOOL6 | +# | ePOOL6: "infinite" static | 200Mbps shaper | +# +-------------------------------------------------------|-------------------+ +# | +# +---|-------------------+ +# | + $h2 H2 | +# | | | +# | + $h2.111 | +# | 192.0.2.34/28 | +# +-----------------------+ +# +# iPOOL0+ePOOL4 is a helper pool for control traffic etc. +# iPOOL1+ePOOL5 are overflow pools. +# iPOOL2+ePOOL6 are PFC pools. + +ALL_TESTS=" + ping_ipv4 + test_qos_pfc +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +_1KB=1000 +_100KB=$((100 * _1KB)) +_500KB=$((500 * _1KB)) +_1MB=$((1000 * _1KB)) +_10MB=$((10 * _1MB)) + +h1_create() +{ + simple_if_init $h1 + mtu_set $h1 10000 + + vlan_create $h1 111 v$h1 192.0.2.33/28 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + mtu_restore $h1 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 111 v$h2 192.0.2.34/28 +} + +h2_destroy() +{ + vlan_destroy $h2 111 + + mtu_restore $h2 + simple_if_fini $h2 +} + +switch_create() +{ + local lanes_swp4 + local pg1_size + + # pools + # ----- + + devlink_pool_size_thtype_save 0 + devlink_pool_size_thtype_save 4 + devlink_pool_size_thtype_save 1 + devlink_pool_size_thtype_save 5 + devlink_pool_size_thtype_save 2 + devlink_pool_size_thtype_save 6 + + devlink_port_pool_th_save $swp1 1 + devlink_port_pool_th_save $swp2 6 + devlink_port_pool_th_save $swp3 5 + devlink_port_pool_th_save $swp4 2 + + devlink_tc_bind_pool_th_save $swp1 1 ingress + devlink_tc_bind_pool_th_save $swp2 1 egress + devlink_tc_bind_pool_th_save $swp3 1 egress + devlink_tc_bind_pool_th_save $swp4 1 ingress + + # Control traffic pools. Just reduce the size. Keep them dynamic so that + # we don't need to change all the uninteresting quotas. + devlink_pool_size_thtype_set 0 dynamic $_500KB + devlink_pool_size_thtype_set 4 dynamic $_500KB + + # Overflow pools. + devlink_pool_size_thtype_set 1 static $_10MB + devlink_pool_size_thtype_set 5 static $_10MB + + # PFC pools. As per the writ, the size of egress PFC pool should be + # infinice, but actually it just needs to be large enough to not matter + # in practice, so reuse the 10MB limit. + devlink_pool_size_thtype_set 2 static $_1MB + devlink_pool_size_thtype_set 6 static $_10MB + + # $swp1 + # ----- + + ip link set dev $swp1 up + mtu_set $swp1 10000 + vlan_create $swp1 111 + ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp1 1 $_10MB + devlink_tc_bind_pool_th_set $swp1 1 ingress 1 $_10MB + + # Configure qdisc so that we can configure PG and therefore pool + # assignment. + tc qdisc replace dev $swp1 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + dcb buffer set dev $swp1 prio-buffer all:0 1:1 + + # $swp2 + # ----- + + ip link set dev $swp2 up + mtu_set $swp2 10000 + vlan_create $swp2 111 + ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp2 6 $_10MB + devlink_tc_bind_pool_th_set $swp2 1 egress 6 $_10MB + + # prio 0->TC0 (band 7), 1->TC1 (band 6). TC1 is shaped. + tc qdisc replace dev $swp2 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + tc qdisc replace dev $swp2 parent 1:7 handle 17: \ + tbf rate 200Mbit burst 131072 limit 1M + + # $swp3 + # ----- + + ip link set dev $swp3 up + mtu_set $swp3 10000 + vlan_create $swp3 111 + ip link set dev $swp3.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp3 5 $_10MB + devlink_tc_bind_pool_th_set $swp3 1 egress 5 $_10MB + + # prio 0->TC0 (band 7), 1->TC1 (band 6) + tc qdisc replace dev $swp3 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + + # Need to enable PFC so that PAUSE takes effect. Therefore need to put + # the lossless prio into a buffer of its own. Don't bother with buffer + # sizes though, there is not going to be any pressure in the "backward" + # direction. + dcb buffer set dev $swp3 prio-buffer all:0 1:1 + dcb pfc set dev $swp3 prio-pfc all:off 1:on + + # $swp4 + # ----- + + ip link set dev $swp4 up + mtu_set $swp4 10000 + vlan_create $swp4 111 + ip link set dev $swp4.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp4 2 $_1MB + devlink_tc_bind_pool_th_set $swp4 1 ingress 2 $_1MB + + # Configure qdisc so that we can hand-tune headroom. + tc qdisc replace dev $swp4 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + dcb buffer set dev $swp4 prio-buffer all:0 1:1 + dcb pfc set dev $swp4 prio-pfc all:off 1:on + # PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which + # is (-2*MTU) about 80K of delay provision. + pg1_size=$_100KB + + setup_wait_dev_with_timeout $swp4 + + lanes_swp4=$(ethtool $swp4 | grep 'Lanes:') + lanes_swp4=${lanes_swp4#*"Lanes: "} + + # 8-lane ports use two buffers among which the configured buffer + # is split, so double the size to get twice (20K + 80K). + if [[ $lanes_swp4 -eq 8 ]]; then + pg1_size=$((pg1_size * 2)) + fi + + dcb buffer set dev $swp4 buffer-size all:0 1:$pg1_size + + # bridges + # ------- + + ip link add name br1 type bridge vlan_filtering 0 + ip link set dev $swp1.111 master br1 + ip link set dev $swp3.111 master br1 + ip link set dev br1 up + + ip link add name br2 type bridge vlan_filtering 0 + ip link set dev $swp2.111 master br2 + ip link set dev $swp4.111 master br2 + ip link set dev br2 up +} + +switch_destroy() +{ + # Do this first so that we can reset the limits to values that are only + # valid for the original static / dynamic setting. + devlink_pool_size_thtype_restore 6 + devlink_pool_size_thtype_restore 5 + devlink_pool_size_thtype_restore 4 + devlink_pool_size_thtype_restore 2 + devlink_pool_size_thtype_restore 1 + devlink_pool_size_thtype_restore 0 + + # bridges + # ------- + + ip link set dev br2 down + ip link set dev $swp4.111 nomaster + ip link set dev $swp2.111 nomaster + ip link del dev br2 + + ip link set dev br1 down + ip link set dev $swp3.111 nomaster + ip link set dev $swp1.111 nomaster + ip link del dev br1 + + # $swp4 + # ----- + + dcb buffer set dev $swp4 buffer-size all:0 + dcb pfc set dev $swp4 prio-pfc all:off + dcb buffer set dev $swp4 prio-buffer all:0 + tc qdisc del dev $swp4 root + + devlink_tc_bind_pool_th_restore $swp4 1 ingress + devlink_port_pool_th_restore $swp4 2 + + vlan_destroy $swp4 111 + mtu_restore $swp4 + ip link set dev $swp4 down + + # $swp3 + # ----- + + dcb pfc set dev $swp3 prio-pfc all:off + dcb buffer set dev $swp3 prio-buffer all:0 + tc qdisc del dev $swp3 root + + devlink_tc_bind_pool_th_restore $swp3 1 egress + devlink_port_pool_th_restore $swp3 5 + + vlan_destroy $swp3 111 + mtu_restore $swp3 + ip link set dev $swp3 down + + # $swp2 + # ----- + + tc qdisc del dev $swp2 parent 1:7 + tc qdisc del dev $swp2 root + + devlink_tc_bind_pool_th_restore $swp2 1 egress + devlink_port_pool_th_restore $swp2 6 + + vlan_destroy $swp2 111 + mtu_restore $swp2 + ip link set dev $swp2 down + + # $swp1 + # ----- + + dcb buffer set dev $swp1 prio-buffer all:0 + tc qdisc del dev $swp1 root + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 1 + + vlan_destroy $swp1 111 + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + swp4=${NETIFS[p6]} + + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 +} + +test_qos_pfc() +{ + RET=0 + + # 10M pool, each packet is 8K of payload + headers + local pkts=$((_10MB / 8050)) + local size=$((pkts * 8050)) + local in0=$(ethtool_stats_get $swp1 rx_octets_prio_1) + local out0=$(ethtool_stats_get $swp2 tx_octets_prio_1) + + $MZ $h1 -p 8000 -Q 1:111 -A 192.0.2.33 -B 192.0.2.34 \ + -a own -b $h2mac -c $pkts -t udp -q + sleep 2 + + local in1=$(ethtool_stats_get $swp1 rx_octets_prio_1) + local out1=$(ethtool_stats_get $swp2 tx_octets_prio_1) + + local din=$((in1 - in0)) + local dout=$((out1 - out0)) + + local pct_in=$((din * 100 / size)) + + ((pct_in > 95 && pct_in < 105)) + check_err $? "Relative ingress out of expected bounds, $pct_in% should be 100%" + + ((dout == din)) + check_err $? "$((din - dout)) bytes out of $din ingressed got lost" + + log_test "PFC" +} + +trap cleanup EXIT + +bail_on_lldpad +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS |