diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh')
-rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh | 698 |
1 files changed, 698 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh new file mode 100755 index 000000000..f4031002d --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh @@ -0,0 +1,698 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test various interface configuration scenarios. Observe that configurations +# deemed valid by mlxsw succeed, invalid configurations fail and that no traces +# are produced. To prevent the test from passing in case traces are produced, +# the user can set the 'kernel.panic_on_warn' and 'kernel.panic_on_oops' +# sysctls in its environment. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + rif_set_addr_test + rif_vrf_set_addr_test + rif_inherit_bridge_addr_test + rif_non_inherit_bridge_addr_test + vlan_interface_deletion_test + bridge_deletion_test + bridge_vlan_flags_test + vlan_1_test + lag_bridge_upper_test + duplicate_vlans_test + vlan_rif_refcount_test + subport_rif_refcount_test + vlan_dev_deletion_test + lag_unlink_slaves_test + lag_dev_deletion_test + vlan_interface_uppers_test + bridge_extern_learn_test + neigh_offload_test + nexthop_offload_test + devlink_reload_test +" +NUM_NETIFS=2 +: ${TIMEOUT:=20000} # ms +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +rif_set_addr_test() +{ + local swp1_mac=$(mac_get $swp1) + local swp2_mac=$(mac_get $swp2) + + RET=0 + + # $swp1 and $swp2 likely got their IPv6 local addresses already, but + # here we need to test the transition to RIF. + ip addr flush dev $swp1 + ip addr flush dev $swp2 + sleep .1 + + ip addr add dev $swp1 192.0.2.1/28 + check_err $? + + ip link set dev $swp1 addr 00:11:22:33:44:55 + check_err $? + + # IP address enablement should be rejected if the MAC address prefix + # doesn't match other RIFs. + ip addr add dev $swp2 192.0.2.2/28 &>/dev/null + check_fail $? "IP address addition passed for a device with a wrong MAC" + ip addr add dev $swp2 192.0.2.2/28 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "no extack for IP address addition" + + ip link set dev $swp2 addr 00:11:22:33:44:66 + check_err $? + ip addr add dev $swp2 192.0.2.2/28 &>/dev/null + check_err $? + + # Change of MAC address of a RIF should be forbidden if the new MAC + # doesn't share the prefix with other MAC addresses. + ip link set dev $swp2 addr 00:11:22:33:00:66 &>/dev/null + check_fail $? "change of MAC address passed for a wrong MAC" + ip link set dev $swp2 addr 00:11:22:33:00:66 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "no extack for MAC address change" + + log_test "RIF - bad MAC change" + + ip addr del dev $swp2 192.0.2.2/28 + ip addr del dev $swp1 192.0.2.1/28 + + ip link set dev $swp2 addr $swp2_mac + ip link set dev $swp1 addr $swp1_mac +} + +rif_vrf_set_addr_test() +{ + # Test that it is possible to set an IP address on a VRF upper despite + # its random MAC address. + RET=0 + + ip link add name vrf-test type vrf table 10 + ip link set dev $swp1 master vrf-test + + ip -4 address add 192.0.2.1/24 dev vrf-test + check_err $? "failed to set IPv4 address on VRF" + ip -6 address add 2001:db8:1::1/64 dev vrf-test + check_err $? "failed to set IPv6 address on VRF" + + log_test "RIF - setting IP address on VRF" + + ip link del dev vrf-test +} + +rif_inherit_bridge_addr_test() +{ + RET=0 + + # Create first RIF + ip addr add dev $swp1 192.0.2.1/28 + check_err $? + + # Create a FID RIF + ip link add name br1 up type bridge vlan_filtering 0 + ip link set dev $swp2 master br1 + ip addr add dev br1 192.0.2.17/28 + check_err $? + + # Prepare a device with a low MAC address + ip link add name d up type dummy + ip link set dev d addr 00:11:22:33:44:55 + + # Attach the device to br1. That prompts bridge address change, which + # should be vetoed, thus preventing the attachment. + ip link set dev d master br1 &>/dev/null + check_fail $? "Device with low MAC was permitted to attach a bridge with RIF" + ip link set dev d master br1 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "no extack for bridge attach rejection" + + ip link set dev $swp2 addr 00:11:22:33:44:55 &>/dev/null + check_fail $? "Changing swp2's MAC address permitted" + ip link set dev $swp2 addr 00:11:22:33:44:55 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "no extack for bridge port MAC address change rejection" + + log_test "RIF - attach port with bad MAC to bridge" + + ip link del dev d + ip link del dev br1 + ip addr del dev $swp1 192.0.2.1/28 +} + +rif_non_inherit_bridge_addr_test() +{ + local swp2_mac=$(mac_get $swp2) + + RET=0 + + # Create first RIF + ip addr add dev $swp1 192.0.2.1/28 + check_err $? + + # Create a FID RIF + ip link add name br1 up type bridge vlan_filtering 0 + ip link set dev br1 addr $swp2_mac + ip link set dev $swp2 master br1 + ip addr add dev br1 192.0.2.17/28 + check_err $? + + # Prepare a device with a low MAC address + ip link add name d up type dummy + ip link set dev d addr 00:11:22:33:44:55 + + # Attach the device to br1. Since the bridge address was set, it should + # work. + ip link set dev d master br1 &>/dev/null + check_err $? "Could not attach a device with low MAC to a bridge with RIF" + + # Port MAC address change should be allowed for a bridge with set MAC. + ip link set dev $swp2 addr 00:11:22:33:44:55 + check_err $? "Changing swp2's MAC address not permitted" + + log_test "RIF - attach port with bad MAC to bridge with set MAC" + + ip link set dev $swp2 addr $swp2_mac + ip link del dev d + ip link del dev br1 + ip addr del dev $swp1 192.0.2.1/28 +} + +vlan_interface_deletion_test() +{ + # Test that when a VLAN interface is deleted, its associated router + # interface (RIF) is correctly deleted and not leaked. See commit + # c360867ec46a ("mlxsw: spectrum: Delete RIF when VLAN device is + # removed") for more details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link add link br0 name br0.10 type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + ip link del dev br0.10 + + # If we leaked the previous RIF, then this should produce a trace + ip link add link br0 name br0.20 type vlan id 20 + ip -6 address add 2001:db8:1::1/64 dev br0.20 + ip link del dev br0.20 + + log_test "vlan interface deletion" + + ip link del dev br0 +} + +bridge_deletion_test() +{ + # Test that when a bridge with VLAN interfaces is deleted, we correctly + # delete the associated RIFs. See commit 602b74eda813 ("mlxsw: + # spectrum_switchdev: Do not leak RIFs when removing bridge") for more + # details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + ip -6 address add 2001:db8::1/64 dev br0 + + ip link add link br0 name br0.10 type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + + ip link add link br0 name br0.20 type vlan id 20 + ip -6 address add 2001:db8:2::1/64 dev br0.20 + + ip link del dev br0 + + # If we leaked previous RIFs, then this should produce a trace + ip -6 address add 2001:db8:1::1/64 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + + log_test "bridge deletion" +} + +bridge_vlan_flags_test() +{ + # Test that when bridge VLAN flags are toggled, we do not take + # unnecessary references on related structs. See commit 9e25826ffc94 + # ("mlxsw: spectrum_switchdev: Fix port_vlan refcounting") for more + # details + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + bridge vlan add vid 10 dev $swp1 pvid untagged + bridge vlan add vid 10 dev $swp1 untagged + bridge vlan add vid 10 dev $swp1 pvid + bridge vlan add vid 10 dev $swp1 + ip link del dev br0 + + # If we did not handle references correctly, then this should produce a + # trace + devlink dev reload "$DEVLINK_DEV" + + # Allow netdevices to be re-created following the reload + sleep 20 + + log_test "bridge vlan flags" +} + +vlan_1_test() +{ + # Test that VLAN 1 can be configured over mlxsw ports. In the past it + # was used internally for untagged traffic. See commit 47bf9df2e820 + # ("mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG") for more + # details + RET=0 + + ip link add link $swp1 name $swp1.1 type vlan id 1 + check_err $? "did not manage to create vlan 1 when should" + + log_test "vlan 1" + + ip link del dev $swp1.1 +} + +lag_bridge_upper_test() +{ + # Test that ports cannot be enslaved to LAG devices that have uppers + # and that failure is handled gracefully. See commit b3529af6bb0d + # ("spectrum: Reference count VLAN entries") for more details + RET=0 + + ip link add name bond1 type bond mode 802.3ad + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev bond1 master br0 + + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 &> /dev/null + check_fail $? "managed to enslave port to lag when should not" + + # This might generate a trace, if we did not handle the failure + # correctly + ip -6 address add 2001:db8:1::1/64 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + + log_test "lag with bridge upper" + + ip link del dev br0 + ip link del dev bond1 +} + +duplicate_vlans_test() +{ + # Test that on a given port a VLAN is only used once. Either as VLAN + # in a VLAN-aware bridge or as a VLAN device + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + bridge vlan add vid 10 dev $swp1 + + ip link add link $swp1 name $swp1.10 type vlan id 10 &> /dev/null + check_fail $? "managed to create vlan device when should not" + + bridge vlan del vid 10 dev $swp1 + ip link add link $swp1 name $swp1.10 type vlan id 10 + check_err $? "did not manage to create vlan device when should" + bridge vlan add vid 10 dev $swp1 &> /dev/null + check_fail $? "managed to add bridge vlan when should not" + + log_test "duplicate vlans" + + ip link del dev $swp1.10 + ip link del dev br0 +} + +vlan_rif_refcount_test() +{ + # Test that RIFs representing VLAN interfaces are not affected from + # ports member in the VLAN. We use the offload indication on routes + # configured on the RIF to understand if it was created / destroyed + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link set dev $swp1 up + ip link set dev br0 up + + ip link add link br0 name br0.10 up type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev br0.10 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was not created before adding port to vlan" + + bridge vlan add vid 10 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was destroyed after adding port to vlan" + + bridge vlan del vid 10 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was destroyed after removing port from vlan" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 + check_err $? "vlan rif was not destroyed after unlinking port from bridge" + + log_test "vlan rif refcount" + + ip link del dev br0.10 + ip link set dev $swp1 down + ip link del dev br0 +} + +subport_rif_refcount_test() +{ + # Test that RIFs representing upper devices of physical ports are + # reference counted correctly and destroyed when should. We use the + # offload indication on routes configured on the RIF to understand if + # it was created / destroyed + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link set dev bond1 up + ip link add link bond1 name bond1.10 up type vlan id 10 + ip -6 address add 2001:db8:1::1/64 dev bond1 + ip -6 address add 2001:db8:2::1/64 dev bond1.10 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif was not created on lag device" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif was not created on vlan device" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed when should not" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif of vlan device was destroyed when should not" + + ip link set dev $swp2 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was not destroyed when should" + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 + check_err $? "subport rif of vlan device was not destroyed when should" + + log_test "subport rif refcount" + + ip link del dev bond1.10 + ip link del dev bond1 +} + +vlan_dev_deletion_test() +{ + # Test that VLAN devices are correctly deleted / unlinked when enslaved + # to bridge + RET=0 + + ip link add name br10 type bridge + ip link add name br20 type bridge + ip link add name br30 type bridge + ip link add link $swp1 name $swp1.10 type vlan id 10 + ip link add link $swp1 name $swp1.20 type vlan id 20 + ip link add link $swp1 name $swp1.30 type vlan id 30 + ip link set dev $swp1.10 master br10 + ip link set dev $swp1.20 master br20 + ip link set dev $swp1.30 master br30 + + # If we did not handle the situation correctly, then these operations + # might produce a trace + ip link set dev $swp1.30 nomaster + ip link del dev $swp1.20 + # Deletion via ioctl uses different code paths from netlink + vconfig rem $swp1.10 &> /dev/null + + log_test "vlan device deletion" + + ip link del dev $swp1.30 + ip link del dev br30 + ip link del dev br20 + ip link del dev br10 +} + +lag_create() +{ + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link add link bond1 name bond1.10 type vlan id 10 + ip link add link bond1 name bond1.20 type vlan id 20 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev bond1 master br0 + + ip link add name br10 type bridge + ip link set dev bond1.10 master br10 + + ip link add name br20 type bridge + ip link set dev bond1.20 master br20 +} + +lag_unlink_slaves_test() +{ + # Test that ports are correctly unlinked from their LAG master, when + # the LAG and its VLAN uppers are enslaved to bridges + RET=0 + + lag_create + + ip link set dev $swp1 nomaster + check_err $? "lag slave $swp1 was not unlinked from master" + ip link set dev $swp2 nomaster + check_err $? "lag slave $swp2 was not unlinked from master" + + # Try to configure corresponding VLANs as router interfaces + ip -6 address add 2001:db8:1::1/64 dev $swp1 + check_err $? "failed to configure ip address on $swp1" + + ip link add link $swp1 name $swp1.10 type vlan id 10 + ip -6 address add 2001:db8:10::1/64 dev $swp1.10 + check_err $? "failed to configure ip address on $swp1.10" + + ip link add link $swp1 name $swp1.20 type vlan id 20 + ip -6 address add 2001:db8:20::1/64 dev $swp1.20 + check_err $? "failed to configure ip address on $swp1.20" + + log_test "lag slaves unlinking" + + ip link del dev $swp1.20 + ip link del dev $swp1.10 + ip address flush dev $swp1 + + ip link del dev br20 + ip link del dev br10 + ip link del dev br0 + ip link del dev bond1 +} + +lag_dev_deletion_test() +{ + # Test that LAG device is correctly deleted, when the LAG and its VLAN + # uppers are enslaved to bridges + RET=0 + + lag_create + + ip link del dev bond1 + + log_test "lag device deletion" + + ip link del dev br20 + ip link del dev br10 + ip link del dev br0 +} + +vlan_interface_uppers_test() +{ + # Test that uppers of a VLAN interface are correctly sanitized + RET=0 + + ip link add name br0 type bridge vlan_filtering 1 + ip link set dev $swp1 master br0 + + ip link add link br0 name br0.10 type vlan id 10 + ip link add link br0.10 name macvlan0 \ + type macvlan mode private &> /dev/null + check_fail $? "managed to create a macvlan when should not" + + ip -6 address add 2001:db8:1::1/64 dev br0.10 + ip link add link br0.10 name macvlan0 type macvlan mode private + check_err $? "did not manage to create a macvlan when should" + + ip link del dev macvlan0 + + ip link add name vrf-test type vrf table 10 + ip link set dev br0.10 master vrf-test + check_err $? "did not manage to enslave vlan interface to vrf" + ip link del dev vrf-test + + ip link add name br-test type bridge + ip link set dev br0.10 master br-test &> /dev/null + check_fail $? "managed to enslave vlan interface to bridge when should not" + ip link del dev br-test + + log_test "vlan interface uppers" + + ip link del dev br0 +} + +bridge_extern_learn_test() +{ + # Test that externally learned entries added from user space are + # marked as offloaded + RET=0 + + ip link add name br0 type bridge + ip link set dev $swp1 master br0 + + bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn + + busywait "$TIMEOUT" wait_for_offload \ + bridge fdb show brport $swp1 de:ad:be:ef:13:37 + check_err $? "fdb entry not marked as offloaded when should" + + log_test "externally learned fdb entry" + + ip link del dev br0 +} + +neigh_offload_test() +{ + # Test that IPv4 and IPv6 neighbour entries are marked as offloaded + RET=0 + + ip -4 address add 192.0.2.1/24 dev $swp1 + ip -6 address add 2001:db8:1::1/64 dev $swp1 + + ip -4 neigh add 192.0.2.2 lladdr de:ad:be:ef:13:37 nud perm dev $swp1 + ip -6 neigh add 2001:db8:1::2 lladdr de:ad:be:ef:13:37 nud perm \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 neigh show dev $swp1 192.0.2.2 + check_err $? "ipv4 neigh entry not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 neigh show dev $swp1 2001:db8:1::2 + check_err $? "ipv6 neigh entry not marked as offloaded when should" + + log_test "neighbour offload indication" + + ip -6 neigh del 2001:db8:1::2 dev $swp1 + ip -4 neigh del 192.0.2.2 dev $swp1 + ip -6 address del 2001:db8:1::1/64 dev $swp1 + ip -4 address del 192.0.2.1/24 dev $swp1 +} + +nexthop_offload_test() +{ + # Test that IPv4 and IPv6 nexthops are marked as offloaded + RET=0 + + sysctl_set net.ipv6.conf.$swp2.keep_addr_on_down 1 + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 192.0.2.2/24 2001:db8:1::2/64 + setup_wait + + ip -4 route add 198.51.100.0/24 vrf v$swp1 \ + nexthop via 192.0.2.2 dev $swp1 + ip -6 route add 2001:db8:2::/64 vrf v$swp1 \ + nexthop via 2001:db8:1::2 dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop not marked as offloaded when should" + + ip link set dev $swp2 down + sleep 1 + + busywait "$TIMEOUT" not wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop marked as offloaded when should not" + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop marked as offloaded when should not" + + ip link set dev $swp2 up + setup_wait + + busywait "$TIMEOUT" wait_for_offload \ + ip -4 route show 198.51.100.0/24 vrf v$swp1 + check_err $? "ipv4 nexthop not marked as offloaded after neigh add" + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route show 2001:db8:2::/64 vrf v$swp1 + check_err $? "ipv6 nexthop not marked as offloaded after neigh add" + + log_test "nexthop offload indication" + + ip -6 route del 2001:db8:2::/64 vrf v$swp1 + ip -4 route del 198.51.100.0/24 vrf v$swp1 + + simple_if_fini $swp2 192.0.2.2/24 2001:db8:1::2/64 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 + sysctl_restore net.ipv6.conf.$swp2.keep_addr_on_down +} + +devlink_reload_test() +{ + # Test that after executing all the above configuration tests, a + # devlink reload can be performed without errors + RET=0 + + devlink dev reload "$DEVLINK_DEV" + check_err $? "devlink reload failed" + + log_test "devlink reload - last test" + + sleep 20 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS |