diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /tools/testing/selftests/net/pmtu.sh | |
parent | Initial commit. (diff) | |
download | linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'tools/testing/selftests/net/pmtu.sh')
-rwxr-xr-x | tools/testing/selftests/net/pmtu.sh | 1924 |
1 files changed, 1924 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh new file mode 100755 index 000000000..3253fdc78 --- /dev/null +++ b/tools/testing/selftests/net/pmtu.sh @@ -0,0 +1,1924 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# Check that route PMTU values match expectations, and that initial device MTU +# values are assigned correctly +# +# Tests currently implemented: +# +# - pmtu_ipv4 +# Set up two namespaces, A and B, with two paths between them over routers +# R1 and R2 (also implemented with namespaces), with different MTUs: +# +# segment a_r1 segment b_r1 a_r1: 2000 +# .--------------R1--------------. b_r1: 1400 +# A B a_r2: 2000 +# '--------------R2--------------' b_r2: 1500 +# segment a_r2 segment b_r2 +# +# Check that PMTU exceptions with the correct PMTU are created. Then +# decrease and increase the MTU of the local link for one of the paths, +# A to R1, checking that route exception PMTU changes accordingly over +# this path. Also check that locked exceptions are created when an ICMP +# message advertising a PMTU smaller than net.ipv4.route.min_pmtu is +# received +# +# - pmtu_ipv6 +# Same as pmtu_ipv4, except for locked PMTU tests, using IPv6 +# +# - pmtu_ipv4_vxlan4_exception +# Set up the same network topology as pmtu_ipv4, create a VXLAN tunnel +# over IPv4 between A and B, routed via R1. On the link between R1 and B, +# set a MTU lower than the VXLAN MTU and the MTU on the link between A and +# R1. Send IPv4 packets, exceeding the MTU between R1 and B, over VXLAN +# from A to B and check that the PMTU exception is created with the right +# value on A +# +# - pmtu_ipv6_vxlan4_exception +# Same as pmtu_ipv4_vxlan4_exception, but send IPv6 packets from A to B +# +# - pmtu_ipv4_vxlan6_exception +# Same as pmtu_ipv4_vxlan4_exception, but use IPv6 transport from A to B +# +# - pmtu_ipv6_vxlan6_exception +# Same as pmtu_ipv4_vxlan6_exception, but send IPv6 packets from A to B +# +# - pmtu_ipv4_geneve4_exception +# Same as pmtu_ipv4_vxlan4_exception, but using a GENEVE tunnel instead of +# VXLAN +# +# - pmtu_ipv6_geneve4_exception +# Same as pmtu_ipv6_vxlan4_exception, but using a GENEVE tunnel instead of +# VXLAN +# +# - pmtu_ipv4_geneve6_exception +# Same as pmtu_ipv4_vxlan6_exception, but using a GENEVE tunnel instead of +# VXLAN +# +# - pmtu_ipv6_geneve6_exception +# Same as pmtu_ipv6_vxlan6_exception, but using a GENEVE tunnel instead of +# VXLAN +# +# - pmtu_ipv{4,6}_br_vxlan{4,6}_exception +# Set up three namespaces, A, B, and C, with routing between A and B over +# R1. R2 is unused in these tests. A has a veth connection to C, and is +# connected to B via a VXLAN endpoint, which is directly bridged to C. +# MTU on the B-R1 link is lower than other MTUs. +# +# Check that both C and A are able to communicate with B over the VXLAN +# tunnel, and that PMTU exceptions with the correct values are created. +# +# segment a_r1 segment b_r1 b_r1: 4000 +# .--------------R1--------------. everything +# C---veth A B else: 5000 +# ' bridge | +# '---- - - - - - VXLAN - - - - - - - ' +# +# - pmtu_ipv{4,6}_br_geneve{4,6}_exception +# Same as pmtu_ipv{4,6}_br_vxlan{4,6}_exception, with a GENEVE tunnel +# instead. +# +# - pmtu_ipv{4,6}_ovs_vxlan{4,6}_exception +# Set up two namespaces, B, and C, with routing between the init namespace +# and B over R1. A and R2 are unused in these tests. The init namespace +# has a veth connection to C, and is connected to B via a VXLAN endpoint, +# which is handled by Open vSwitch and bridged to C. MTU on the B-R1 link +# is lower than other MTUs. +# +# Check that C is able to communicate with B over the VXLAN tunnel, and +# that PMTU exceptions with the correct values are created. +# +# segment a_r1 segment b_r1 b_r1: 4000 +# .--------------R1--------------. everything +# C---veth init B else: 5000 +# '- ovs | +# '---- - - - - - VXLAN - - - - - - - ' +# +# - pmtu_ipv{4,6}_ovs_geneve{4,6}_exception +# Same as pmtu_ipv{4,6}_ovs_vxlan{4,6}_exception, with a GENEVE tunnel +# instead. +# +# - pmtu_ipv{4,6}_fou{4,6}_exception +# Same as pmtu_ipv4_vxlan4, but using a direct IPv4/IPv6 encapsulation +# (FoU) over IPv4/IPv6, instead of VXLAN +# +# - pmtu_ipv{4,6}_fou{4,6}_exception +# Same as pmtu_ipv4_vxlan4, but using a generic UDP IPv4/IPv6 +# encapsulation (GUE) over IPv4/IPv6, instead of VXLAN +# +# - pmtu_ipv{4,6}_ipv{4,6}_exception +# Same as pmtu_ipv4_vxlan4, but using a IPv4/IPv6 tunnel over IPv4/IPv6, +# instead of VXLAN +# +# - pmtu_vti4_exception +# Set up vti tunnel on top of veth, with xfrm states and policies, in two +# namespaces with matching endpoints. Check that route exception is not +# created if link layer MTU is not exceeded, then exceed it and check that +# exception is created with the expected PMTU. The approach described +# below for IPv6 doesn't apply here, because, on IPv4, administrative MTU +# changes alone won't affect PMTU +# +# - pmtu_vti6_exception +# Set up vti6 tunnel on top of veth, with xfrm states and policies, in two +# namespaces with matching endpoints. Check that route exception is +# created by exceeding link layer MTU with ping to other endpoint. Then +# decrease and increase MTU of tunnel, checking that route exception PMTU +# changes accordingly +# +# - pmtu_vti4_default_mtu +# Set up vti4 tunnel on top of veth, in two namespaces with matching +# endpoints. Check that MTU assigned to vti interface is the MTU of the +# lower layer (veth) minus additional lower layer headers (zero, for veth) +# minus IPv4 header length +# +# - pmtu_vti6_default_mtu +# Same as above, for IPv6 +# +# - pmtu_vti4_link_add_mtu +# Set up vti4 interface passing MTU value at link creation, check MTU is +# configured, and that link is not created with invalid MTU values +# +# - pmtu_vti6_link_add_mtu +# Same as above, for IPv6 +# +# - pmtu_vti6_link_change_mtu +# Set up two dummy interfaces with different MTUs, create a vti6 tunnel +# and check that configured MTU is used on link creation and changes, and +# that MTU is properly calculated instead when MTU is not configured from +# userspace +# +# - cleanup_ipv4_exception +# Similar to pmtu_ipv4_vxlan4_exception, but explicitly generate PMTU +# exceptions on multiple CPUs and check that the veth device tear-down +# happens in a timely manner +# +# - cleanup_ipv6_exception +# Same as above, but use IPv6 transport from A to B +# +# - list_flush_ipv4_exception +# Using the same topology as in pmtu_ipv4, create exceptions, and check +# they are shown when listing exception caches, gone after flushing them +# +# - list_flush_ipv6_exception +# Using the same topology as in pmtu_ipv6, create exceptions, and check +# they are shown when listing exception caches, gone after flushing them +# +# - pmtu_ipv4_route_change +# Use the same topology as in pmtu_ipv4, but issue a route replacement +# command and delete the corresponding device afterward. This tests for +# proper cleanup of the PMTU exceptions by the route replacement path. +# Device unregistration should complete successfully +# +# - pmtu_ipv6_route_change +# Same as above but with IPv6 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +PAUSE_ON_FAIL=no +VERBOSE=0 +TRACING=0 + +# Some systems don't have a ping6 binary anymore +which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) + +# Name Description re-run with nh +tests=" + pmtu_ipv4_exception ipv4: PMTU exceptions 1 + pmtu_ipv6_exception ipv6: PMTU exceptions 1 + pmtu_ipv4_vxlan4_exception IPv4 over vxlan4: PMTU exceptions 1 + pmtu_ipv6_vxlan4_exception IPv6 over vxlan4: PMTU exceptions 1 + pmtu_ipv4_vxlan6_exception IPv4 over vxlan6: PMTU exceptions 1 + pmtu_ipv6_vxlan6_exception IPv6 over vxlan6: PMTU exceptions 1 + pmtu_ipv4_geneve4_exception IPv4 over geneve4: PMTU exceptions 1 + pmtu_ipv6_geneve4_exception IPv6 over geneve4: PMTU exceptions 1 + pmtu_ipv4_geneve6_exception IPv4 over geneve6: PMTU exceptions 1 + pmtu_ipv6_geneve6_exception IPv6 over geneve6: PMTU exceptions 1 + pmtu_ipv4_br_vxlan4_exception IPv4, bridged vxlan4: PMTU exceptions 1 + pmtu_ipv6_br_vxlan4_exception IPv6, bridged vxlan4: PMTU exceptions 1 + pmtu_ipv4_br_vxlan6_exception IPv4, bridged vxlan6: PMTU exceptions 1 + pmtu_ipv6_br_vxlan6_exception IPv6, bridged vxlan6: PMTU exceptions 1 + pmtu_ipv4_br_geneve4_exception IPv4, bridged geneve4: PMTU exceptions 1 + pmtu_ipv6_br_geneve4_exception IPv6, bridged geneve4: PMTU exceptions 1 + pmtu_ipv4_br_geneve6_exception IPv4, bridged geneve6: PMTU exceptions 1 + pmtu_ipv6_br_geneve6_exception IPv6, bridged geneve6: PMTU exceptions 1 + pmtu_ipv4_ovs_vxlan4_exception IPv4, OVS vxlan4: PMTU exceptions 1 + pmtu_ipv6_ovs_vxlan4_exception IPv6, OVS vxlan4: PMTU exceptions 1 + pmtu_ipv4_ovs_vxlan6_exception IPv4, OVS vxlan6: PMTU exceptions 1 + pmtu_ipv6_ovs_vxlan6_exception IPv6, OVS vxlan6: PMTU exceptions 1 + pmtu_ipv4_ovs_geneve4_exception IPv4, OVS geneve4: PMTU exceptions 1 + pmtu_ipv6_ovs_geneve4_exception IPv6, OVS geneve4: PMTU exceptions 1 + pmtu_ipv4_ovs_geneve6_exception IPv4, OVS geneve6: PMTU exceptions 1 + pmtu_ipv6_ovs_geneve6_exception IPv6, OVS geneve6: PMTU exceptions 1 + pmtu_ipv4_fou4_exception IPv4 over fou4: PMTU exceptions 1 + pmtu_ipv6_fou4_exception IPv6 over fou4: PMTU exceptions 1 + pmtu_ipv4_fou6_exception IPv4 over fou6: PMTU exceptions 1 + pmtu_ipv6_fou6_exception IPv6 over fou6: PMTU exceptions 1 + pmtu_ipv4_gue4_exception IPv4 over gue4: PMTU exceptions 1 + pmtu_ipv6_gue4_exception IPv6 over gue4: PMTU exceptions 1 + pmtu_ipv4_gue6_exception IPv4 over gue6: PMTU exceptions 1 + pmtu_ipv6_gue6_exception IPv6 over gue6: PMTU exceptions 1 + pmtu_ipv4_ipv4_exception IPv4 over IPv4: PMTU exceptions 1 + pmtu_ipv6_ipv4_exception IPv6 over IPv4: PMTU exceptions 1 + pmtu_ipv4_ipv6_exception IPv4 over IPv6: PMTU exceptions 1 + pmtu_ipv6_ipv6_exception IPv6 over IPv6: PMTU exceptions 1 + pmtu_vti6_exception vti6: PMTU exceptions 0 + pmtu_vti4_exception vti4: PMTU exceptions 0 + pmtu_vti4_default_mtu vti4: default MTU assignment 0 + pmtu_vti6_default_mtu vti6: default MTU assignment 0 + pmtu_vti4_link_add_mtu vti4: MTU setting on link creation 0 + pmtu_vti6_link_add_mtu vti6: MTU setting on link creation 0 + pmtu_vti6_link_change_mtu vti6: MTU changes on link changes 0 + cleanup_ipv4_exception ipv4: cleanup of cached exceptions 1 + cleanup_ipv6_exception ipv6: cleanup of cached exceptions 1 + list_flush_ipv4_exception ipv4: list and flush cached exceptions 1 + list_flush_ipv6_exception ipv6: list and flush cached exceptions 1 + pmtu_ipv4_route_change ipv4: PMTU exception w/route replace 1 + pmtu_ipv6_route_change ipv6: PMTU exception w/route replace 1" + +NS_A="ns-A" +NS_B="ns-B" +NS_C="ns-C" +NS_R1="ns-R1" +NS_R2="ns-R2" +ns_a="ip netns exec ${NS_A}" +ns_b="ip netns exec ${NS_B}" +ns_c="ip netns exec ${NS_C}" +ns_r1="ip netns exec ${NS_R1}" +ns_r2="ip netns exec ${NS_R2}" + +# Addressing and routing for tests with routers: four network segments, with +# index SEGMENT between 1 and 4, a common prefix (PREFIX4 or PREFIX6) and an +# identifier ID, which is 1 for hosts (A and B), 2 for routers (R1 and R2). +# Addresses are: +# - IPv4: PREFIX4.SEGMENT.ID (/24) +# - IPv6: PREFIX6:SEGMENT::ID (/64) +prefix4="10.0" +prefix6="fc00" +a_r1=1 +a_r2=2 +b_r1=3 +b_r2=4 +# ns peer segment +routing_addrs=" + A R1 ${a_r1} + A R2 ${a_r2} + B R1 ${b_r1} + B R2 ${b_r2} +" +# Traffic from A to B goes through R1 by default, and through R2, if destined to +# B's address on the b_r2 segment. +# Traffic from B to A goes through R1. +# ns destination gateway +routes=" + A default ${prefix4}.${a_r1}.2 + A ${prefix4}.${b_r2}.1 ${prefix4}.${a_r2}.2 + B default ${prefix4}.${b_r1}.2 + + A default ${prefix6}:${a_r1}::2 + A ${prefix6}:${b_r2}::1 ${prefix6}:${a_r2}::2 + B default ${prefix6}:${b_r1}::2 +" + +USE_NH="no" +# ns family nh id destination gateway +nexthops=" + A 4 41 ${prefix4}.${a_r1}.2 veth_A-R1 + A 4 42 ${prefix4}.${a_r2}.2 veth_A-R2 + B 4 41 ${prefix4}.${b_r1}.2 veth_B-R1 + + A 6 61 ${prefix6}:${a_r1}::2 veth_A-R1 + A 6 62 ${prefix6}:${a_r2}::2 veth_A-R2 + B 6 61 ${prefix6}:${b_r1}::2 veth_B-R1 +" + +# nexthop id correlates to id in nexthops config above +# ns family prefix nh id +routes_nh=" + A 4 default 41 + A 4 ${prefix4}.${b_r2}.1 42 + B 4 default 41 + + A 6 default 61 + A 6 ${prefix6}:${b_r2}::1 62 + B 6 default 61 +" + +veth4_a_addr="192.168.1.1" +veth4_b_addr="192.168.1.2" +veth4_c_addr="192.168.2.10" +veth4_mask="24" +veth6_a_addr="fd00:1::a" +veth6_b_addr="fd00:1::b" +veth6_c_addr="fd00:2::c" +veth6_mask="64" + +tunnel4_a_addr="192.168.2.1" +tunnel4_b_addr="192.168.2.2" +tunnel4_mask="24" +tunnel6_a_addr="fd00:2::a" +tunnel6_b_addr="fd00:2::b" +tunnel6_mask="64" + +dummy6_0_prefix="fc00:1000::" +dummy6_1_prefix="fc00:1001::" +dummy6_mask="64" + +err_buf= +tcpdump_pids= + +err() { + err_buf="${err_buf}${1} +" +} + +err_flush() { + echo -n "${err_buf}" + err_buf= +} + +run_cmd() { + cmd="$*" + + if [ "$VERBOSE" = "1" ]; then + printf " COMMAND: $cmd\n" + fi + + out="$($cmd 2>&1)" + rc=$? + if [ "$VERBOSE" = "1" -a -n "$out" ]; then + echo " $out" + echo + fi + + return $rc +} + +# Find the auto-generated name for this namespace +nsname() { + eval echo \$NS_$1 +} + +setup_fou_or_gue() { + outer="${1}" + inner="${2}" + encap="${3}" + + if [ "${outer}" = "4" ]; then + modprobe fou || return 2 + a_addr="${prefix4}.${a_r1}.1" + b_addr="${prefix4}.${b_r1}.1" + if [ "${inner}" = "4" ]; then + type="ipip" + ipproto="4" + else + type="sit" + ipproto="41" + fi + else + modprobe fou6 || return 2 + a_addr="${prefix6}:${a_r1}::1" + b_addr="${prefix6}:${b_r1}::1" + if [ "${inner}" = "4" ]; then + type="ip6tnl" + mode="mode ipip6" + ipproto="4 -6" + else + type="ip6tnl" + mode="mode ip6ip6" + ipproto="41 -6" + fi + fi + + run_cmd ${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2 + run_cmd ${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2 + + run_cmd ${ns_b} ip fou add port 5556 ipproto ${ipproto} + run_cmd ${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555 + + if [ "${inner}" = "4" ]; then + run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a + run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b + else + run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a + run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b + fi + + run_cmd ${ns_a} ip link set ${encap}_a up + run_cmd ${ns_b} ip link set ${encap}_b up +} + +setup_fou44() { + setup_fou_or_gue 4 4 fou +} + +setup_fou46() { + setup_fou_or_gue 4 6 fou +} + +setup_fou64() { + setup_fou_or_gue 6 4 fou +} + +setup_fou66() { + setup_fou_or_gue 6 6 fou +} + +setup_gue44() { + setup_fou_or_gue 4 4 gue +} + +setup_gue46() { + setup_fou_or_gue 4 6 gue +} + +setup_gue64() { + setup_fou_or_gue 6 4 gue +} + +setup_gue66() { + setup_fou_or_gue 6 6 gue +} + +setup_ipvX_over_ipvY() { + inner=${1} + outer=${2} + + if [ "${outer}" -eq 4 ]; then + a_addr="${prefix4}.${a_r1}.1" + b_addr="${prefix4}.${b_r1}.1" + if [ "${inner}" -eq 4 ]; then + type="ipip" + mode="ipip" + else + type="sit" + mode="ip6ip" + fi + else + a_addr="${prefix6}:${a_r1}::1" + b_addr="${prefix6}:${b_r1}::1" + type="ip6tnl" + if [ "${inner}" -eq 4 ]; then + mode="ipip6" + else + mode="ip6ip6" + fi + fi + + run_cmd ${ns_a} ip link add ip_a type ${type} local ${a_addr} remote ${b_addr} mode ${mode} || return 2 + run_cmd ${ns_b} ip link add ip_b type ${type} local ${b_addr} remote ${a_addr} mode ${mode} + + run_cmd ${ns_a} ip link set ip_a up + run_cmd ${ns_b} ip link set ip_b up + + if [ "${inner}" = "4" ]; then + run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ip_a + run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ip_b + else + run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ip_a + run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ip_b + fi +} + +setup_ip4ip4() { + setup_ipvX_over_ipvY 4 4 +} + +setup_ip6ip4() { + setup_ipvX_over_ipvY 6 4 +} + +setup_ip4ip6() { + setup_ipvX_over_ipvY 4 6 +} + +setup_ip6ip6() { + setup_ipvX_over_ipvY 6 6 +} + +setup_namespaces() { + for n in ${NS_A} ${NS_B} ${NS_C} ${NS_R1} ${NS_R2}; do + ip netns add ${n} || return 1 + + # Disable DAD, so that we don't have to wait to use the + # configured IPv6 addresses + ip netns exec ${n} sysctl -q net/ipv6/conf/default/accept_dad=0 + done +} + +setup_veth() { + run_cmd ${ns_a} ip link add veth_a type veth peer name veth_b || return 1 + run_cmd ${ns_a} ip link set veth_b netns ${NS_B} + + run_cmd ${ns_a} ip addr add ${veth4_a_addr}/${veth4_mask} dev veth_a + run_cmd ${ns_b} ip addr add ${veth4_b_addr}/${veth4_mask} dev veth_b + + run_cmd ${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a + run_cmd ${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b + + run_cmd ${ns_a} ip link set veth_a up + run_cmd ${ns_b} ip link set veth_b up +} + +setup_vti() { + proto=${1} + veth_a_addr="${2}" + veth_b_addr="${3}" + vti_a_addr="${4}" + vti_b_addr="${5}" + vti_mask=${6} + + [ ${proto} -eq 6 ] && vti_type="vti6" || vti_type="vti" + + run_cmd ${ns_a} ip link add vti${proto}_a type ${vti_type} local ${veth_a_addr} remote ${veth_b_addr} key 10 || return 1 + run_cmd ${ns_b} ip link add vti${proto}_b type ${vti_type} local ${veth_b_addr} remote ${veth_a_addr} key 10 + + run_cmd ${ns_a} ip addr add ${vti_a_addr}/${vti_mask} dev vti${proto}_a + run_cmd ${ns_b} ip addr add ${vti_b_addr}/${vti_mask} dev vti${proto}_b + + run_cmd ${ns_a} ip link set vti${proto}_a up + run_cmd ${ns_b} ip link set vti${proto}_b up +} + +setup_vti4() { + setup_vti 4 ${veth4_a_addr} ${veth4_b_addr} ${tunnel4_a_addr} ${tunnel4_b_addr} ${tunnel4_mask} +} + +setup_vti6() { + setup_vti 6 ${veth6_a_addr} ${veth6_b_addr} ${tunnel6_a_addr} ${tunnel6_b_addr} ${tunnel6_mask} +} + +setup_vxlan_or_geneve() { + type="${1}" + a_addr="${2}" + b_addr="${3}" + opts="${4}" + br_if_a="${5}" + + if [ "${type}" = "vxlan" ]; then + opts="${opts} ttl 64 dstport 4789" + opts_a="local ${a_addr}" + opts_b="local ${b_addr}" + else + opts_a="" + opts_b="" + fi + + run_cmd ${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1 + run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} + + if [ -n "${br_if_a}" ]; then + run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${br_if_a} + run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${br_if_a} + run_cmd ${ns_a} ip link set ${type}_a master ${br_if_a} + else + run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a + run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a + fi + + run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b + run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b + + run_cmd ${ns_a} ip link set ${type}_a up + run_cmd ${ns_b} ip link set ${type}_b up +} + +setup_geneve4() { + setup_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "df set" +} + +setup_vxlan4() { + setup_vxlan_or_geneve vxlan ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "df set" +} + +setup_geneve6() { + setup_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 "" +} + +setup_vxlan6() { + setup_vxlan_or_geneve vxlan ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 "" +} + +setup_bridged_geneve4() { + setup_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "df set" "br0" +} + +setup_bridged_vxlan4() { + setup_vxlan_or_geneve vxlan ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "df set" "br0" +} + +setup_bridged_geneve6() { + setup_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 "" "br0" +} + +setup_bridged_vxlan6() { + setup_vxlan_or_geneve vxlan ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 "" "br0" +} + +setup_xfrm() { + proto=${1} + veth_a_addr="${2}" + veth_b_addr="${3}" + + run_cmd ${ns_a} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel || return 1 + run_cmd ${ns_a} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel + run_cmd ${ns_a} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel + run_cmd ${ns_a} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel + + run_cmd ${ns_b} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel + run_cmd ${ns_b} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel + run_cmd ${ns_b} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel + run_cmd ${ns_b} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel +} + +setup_xfrm4() { + setup_xfrm 4 ${veth4_a_addr} ${veth4_b_addr} +} + +setup_xfrm6() { + setup_xfrm 6 ${veth6_a_addr} ${veth6_b_addr} +} + +setup_routing_old() { + for i in ${routes}; do + [ "${ns}" = "" ] && ns="${i}" && continue + [ "${addr}" = "" ] && addr="${i}" && continue + [ "${gw}" = "" ] && gw="${i}" + + ns_name="$(nsname ${ns})" + + ip -n ${ns_name} route add ${addr} via ${gw} + + ns=""; addr=""; gw="" + done +} + +setup_routing_new() { + for i in ${nexthops}; do + [ "${ns}" = "" ] && ns="${i}" && continue + [ "${fam}" = "" ] && fam="${i}" && continue + [ "${nhid}" = "" ] && nhid="${i}" && continue + [ "${gw}" = "" ] && gw="${i}" && continue + [ "${dev}" = "" ] && dev="${i}" + + ns_name="$(nsname ${ns})" + + ip -n ${ns_name} -${fam} nexthop add id ${nhid} via ${gw} dev ${dev} + + ns=""; fam=""; nhid=""; gw=""; dev="" + + done + + for i in ${routes_nh}; do + [ "${ns}" = "" ] && ns="${i}" && continue + [ "${fam}" = "" ] && fam="${i}" && continue + [ "${addr}" = "" ] && addr="${i}" && continue + [ "${nhid}" = "" ] && nhid="${i}" + + ns_name="$(nsname ${ns})" + + ip -n ${ns_name} -${fam} route add ${addr} nhid ${nhid} + + ns=""; fam=""; addr=""; nhid="" + done +} + +setup_routing() { + for i in ${NS_R1} ${NS_R2}; do + ip netns exec ${i} sysctl -q net/ipv4/ip_forward=1 + ip netns exec ${i} sysctl -q net/ipv6/conf/all/forwarding=1 + done + + for i in ${routing_addrs}; do + [ "${ns}" = "" ] && ns="${i}" && continue + [ "${peer}" = "" ] && peer="${i}" && continue + [ "${segment}" = "" ] && segment="${i}" + + ns_name="$(nsname ${ns})" + peer_name="$(nsname ${peer})" + if="veth_${ns}-${peer}" + ifpeer="veth_${peer}-${ns}" + + # Create veth links + ip link add ${if} up netns ${ns_name} type veth peer name ${ifpeer} netns ${peer_name} || return 1 + ip -n ${peer_name} link set dev ${ifpeer} up + + # Add addresses + ip -n ${ns_name} addr add ${prefix4}.${segment}.1/24 dev ${if} + ip -n ${ns_name} addr add ${prefix6}:${segment}::1/64 dev ${if} + + ip -n ${peer_name} addr add ${prefix4}.${segment}.2/24 dev ${ifpeer} + ip -n ${peer_name} addr add ${prefix6}:${segment}::2/64 dev ${ifpeer} + + ns=""; peer=""; segment="" + done + + if [ "$USE_NH" = "yes" ]; then + setup_routing_new + else + setup_routing_old + fi + + return 0 +} + +setup_bridge() { + run_cmd ${ns_a} ip link add br0 type bridge || return 2 + run_cmd ${ns_a} ip link set br0 up + + run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C + run_cmd ${ns_c} ip link set veth_A-C netns ns-A + + run_cmd ${ns_a} ip link set veth_A-C up + run_cmd ${ns_c} ip link set veth_C-A up + run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A + run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A + run_cmd ${ns_a} ip link set veth_A-C master br0 +} + +setup_ovs_vxlan_or_geneve() { + type="${1}" + a_addr="${2}" + b_addr="${3}" + + if [ "${type}" = "vxlan" ]; then + opts="${opts} ttl 64 dstport 4789" + opts_b="local ${b_addr}" + fi + + run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \ + set interface ${type}_a type=${type} \ + options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1 + + run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1 + + run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b + run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b + + run_cmd ${ns_b} ip link set ${type}_b up +} + +setup_ovs_geneve4() { + setup_ovs_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 +} + +setup_ovs_vxlan4() { + setup_ovs_vxlan_or_geneve vxlan ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 +} + +setup_ovs_geneve6() { + setup_ovs_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 +} + +setup_ovs_vxlan6() { + setup_ovs_vxlan_or_geneve vxlan ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 +} + +setup_ovs_bridge() { + run_cmd ovs-vsctl add-br ovs_br0 || return 2 + run_cmd ip link set ovs_br0 up + + run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C + run_cmd ${ns_c} ip link set veth_A-C netns 1 + + run_cmd ip link set veth_A-C up + run_cmd ${ns_c} ip link set veth_C-A up + run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A + run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A + run_cmd ovs-vsctl add-port ovs_br0 veth_A-C + + # Move veth_A-R1 to init + run_cmd ${ns_a} ip link set veth_A-R1 netns 1 + run_cmd ip addr add ${prefix4}.${a_r1}.1/${veth4_mask} dev veth_A-R1 + run_cmd ip addr add ${prefix6}:${a_r1}::1/${veth6_mask} dev veth_A-R1 + run_cmd ip link set veth_A-R1 up + run_cmd ip route add ${prefix4}.${b_r1}.1 via ${prefix4}.${a_r1}.2 + run_cmd ip route add ${prefix6}:${b_r1}::1 via ${prefix6}:${a_r1}::2 +} + +setup() { + [ "$(id -u)" -ne 0 ] && echo " need to run as root" && return $ksft_skip + + for arg do + eval setup_${arg} || { echo " ${arg} not supported"; return 1; } + done +} + +trace() { + [ $TRACING -eq 0 ] && return + + for arg do + [ "${ns_cmd}" = "" ] && ns_cmd="${arg}" && continue + ${ns_cmd} tcpdump --immediate-mode -s 0 -i "${arg}" -w "${name}_${arg}.pcap" 2> /dev/null & + tcpdump_pids="${tcpdump_pids} $!" + ns_cmd= + done + sleep 1 +} + +cleanup() { + for pid in ${tcpdump_pids}; do + kill ${pid} + done + tcpdump_pids= + + for n in ${NS_A} ${NS_B} ${NS_C} ${NS_R1} ${NS_R2}; do + ip netns del ${n} 2> /dev/null + done + + ip link del veth_A-C 2>/dev/null + ip link del veth_A-R1 2>/dev/null + ovs-vsctl --if-exists del-port vxlan_a 2>/dev/null + ovs-vsctl --if-exists del-br ovs_br0 2>/dev/null +} + +mtu() { + ns_cmd="${1}" + dev="${2}" + mtu="${3}" + + ${ns_cmd} ip link set dev ${dev} mtu ${mtu} +} + +mtu_parse() { + input="${1}" + + next=0 + for i in ${input}; do + [ ${next} -eq 1 -a "${i}" = "lock" ] && next=2 && continue + [ ${next} -eq 1 ] && echo "${i}" && return + [ ${next} -eq 2 ] && echo "lock ${i}" && return + [ "${i}" = "mtu" ] && next=1 + done +} + +link_get() { + ns_cmd="${1}" + name="${2}" + + ${ns_cmd} ip link show dev "${name}" +} + +link_get_mtu() { + ns_cmd="${1}" + name="${2}" + + mtu_parse "$(link_get "${ns_cmd}" ${name})" +} + +route_get_dst_exception() { + ns_cmd="${1}" + dst="${2}" + + ${ns_cmd} ip route get "${dst}" +} + +route_get_dst_pmtu_from_exception() { + ns_cmd="${1}" + dst="${2}" + + mtu_parse "$(route_get_dst_exception "${ns_cmd}" ${dst})" +} + +check_pmtu_value() { + expected="${1}" + value="${2}" + event="${3}" + + [ "${expected}" = "any" ] && [ -n "${value}" ] && return 0 + [ "${value}" = "${expected}" ] && return 0 + [ -z "${value}" ] && err " PMTU exception wasn't created after ${event}" && return 1 + [ -z "${expected}" ] && err " PMTU exception shouldn't exist after ${event}" && return 1 + err " found PMTU exception with incorrect MTU ${value}, expected ${expected}, after ${event}" + return 1 +} + +test_pmtu_ipvX() { + family=${1} + + setup namespaces routing || return 2 + trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \ + "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \ + "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2 + + if [ ${family} -eq 4 ]; then + ping=ping + dst1="${prefix4}.${b_r1}.1" + dst2="${prefix4}.${b_r2}.1" + else + ping=${ping6} + dst1="${prefix6}:${b_r1}::1" + dst2="${prefix6}:${b_r2}::1" + fi + + # Set up initial MTU values + mtu "${ns_a}" veth_A-R1 2000 + mtu "${ns_r1}" veth_R1-A 2000 + mtu "${ns_r1}" veth_R1-B 1400 + mtu "${ns_b}" veth_B-R1 1400 + + mtu "${ns_a}" veth_A-R2 2000 + mtu "${ns_r2}" veth_R2-A 2000 + mtu "${ns_r2}" veth_R2-B 1500 + mtu "${ns_b}" veth_B-R2 1500 + + # Create route exceptions + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} + + # Check that exceptions have been created with the correct PMTU + pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})" + check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1 + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1 + + # Decrease local MTU below PMTU, check for PMTU decrease in route exception + mtu "${ns_a}" veth_A-R1 1300 + mtu "${ns_r1}" veth_R1-A 1300 + pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})" + check_pmtu_value "1300" "${pmtu_1}" "decreasing local MTU" || return 1 + # Second exception shouldn't be modified + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "1500" "${pmtu_2}" "changing local MTU on a link not on this path" || return 1 + + # Increase MTU, check for PMTU increase in route exception + mtu "${ns_a}" veth_A-R1 1700 + mtu "${ns_r1}" veth_R1-A 1700 + pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})" + check_pmtu_value "1700" "${pmtu_1}" "increasing local MTU" || return 1 + # Second exception shouldn't be modified + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "1500" "${pmtu_2}" "changing local MTU on a link not on this path" || return 1 + + # Skip PMTU locking tests for IPv6 + [ $family -eq 6 ] && return 0 + + # Decrease remote MTU on path via R2, get new exception + mtu "${ns_r2}" veth_R2-B 400 + mtu "${ns_b}" veth_B-R2 400 + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1 + + # Decrease local MTU below PMTU + mtu "${ns_a}" veth_A-R2 500 + mtu "${ns_r2}" veth_R2-A 500 + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "500" "${pmtu_2}" "decreasing local MTU" || return 1 + + # Increase local MTU + mtu "${ns_a}" veth_A-R2 1500 + mtu "${ns_r2}" veth_R2-A 1500 + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "1500" "${pmtu_2}" "increasing local MTU" || return 1 + + # Get new exception + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1 +} + +test_pmtu_ipv4_exception() { + test_pmtu_ipvX 4 +} + +test_pmtu_ipv6_exception() { + test_pmtu_ipvX 6 +} + +test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() { + type=${1} + family=${2} + outer_family=${3} + ll_mtu=4000 + + if [ ${outer_family} -eq 4 ]; then + setup namespaces routing ${type}4 || return 2 + # IPv4 header UDP header VXLAN/GENEVE header Ethernet header + exp_mtu=$((${ll_mtu} - 20 - 8 - 8 - 14)) + else + setup namespaces routing ${type}6 || return 2 + # IPv6 header UDP header VXLAN/GENEVE header Ethernet header + exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) + fi + + trace "${ns_a}" ${type}_a "${ns_b}" ${type}_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B + + if [ ${family} -eq 4 ]; then + ping=ping + dst=${tunnel4_b_addr} + else + ping=${ping6} + dst=${tunnel6_b_addr} + fi + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} + + # Check that exception was created + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" + check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${type} interface" +} + +test_pmtu_ipv4_vxlan4_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 4 4 +} + +test_pmtu_ipv6_vxlan4_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 6 4 +} + +test_pmtu_ipv4_geneve4_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 4 +} + +test_pmtu_ipv6_geneve4_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 4 +} + +test_pmtu_ipv4_vxlan6_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 4 6 +} + +test_pmtu_ipv6_vxlan6_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 6 6 +} + +test_pmtu_ipv4_geneve6_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 6 +} + +test_pmtu_ipv6_geneve6_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 6 +} + +test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception() { + type=${1} + family=${2} + outer_family=${3} + ll_mtu=4000 + + if [ ${outer_family} -eq 4 ]; then + setup namespaces routing bridge bridged_${type}4 || return 2 + # IPv4 header UDP header VXLAN/GENEVE header Ethernet header + exp_mtu=$((${ll_mtu} - 20 - 8 - 8 - 14)) + else + setup namespaces routing bridge bridged_${type}6 || return 2 + # IPv6 header UDP header VXLAN/GENEVE header Ethernet header + exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) + fi + + trace "${ns_a}" ${type}_a "${ns_b}" ${type}_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ + "${ns_a}" br0 "${ns_a}" veth-A-C \ + "${ns_c}" veth_C-A + + if [ ${family} -eq 4 ]; then + ping=ping + dst=${tunnel4_b_addr} + else + ping=${ping6} + dst=${tunnel6_b_addr} + fi + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_a}" br0 $((${ll_mtu} + 1000)) + mtu "${ns_a}" veth_A-C $((${ll_mtu} + 1000)) + mtu "${ns_c}" veth_C-A $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + + run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 10 -s $((${ll_mtu} + 500)) ${dst} || return 1 + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} || return 1 + + # Check that exceptions were created + pmtu="$(route_get_dst_pmtu_from_exception "${ns_c}" ${dst})" + check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on bridged ${type} interface" + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" + check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on locally bridged ${type} interface" +} + +test_pmtu_ipv4_br_vxlan4_exception() { + test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception vxlan 4 4 +} + +test_pmtu_ipv6_br_vxlan4_exception() { + test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception vxlan 6 4 +} + +test_pmtu_ipv4_br_geneve4_exception() { + test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception geneve 4 4 +} + +test_pmtu_ipv6_br_geneve4_exception() { + test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception geneve 6 4 +} + +test_pmtu_ipv4_br_vxlan6_exception() { + test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception vxlan 4 6 +} + +test_pmtu_ipv6_br_vxlan6_exception() { + test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception vxlan 6 6 +} + +test_pmtu_ipv4_br_geneve6_exception() { + test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception geneve 4 6 +} + +test_pmtu_ipv6_br_geneve6_exception() { + test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception geneve 6 6 +} + +test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() { + type=${1} + family=${2} + outer_family=${3} + ll_mtu=4000 + + if [ ${outer_family} -eq 4 ]; then + setup namespaces routing ovs_bridge ovs_${type}4 || return 2 + # IPv4 header UDP header VXLAN/GENEVE header Ethernet header + exp_mtu=$((${ll_mtu} - 20 - 8 - 8 - 14)) + else + setup namespaces routing ovs_bridge ovs_${type}6 || return 2 + # IPv6 header UDP header VXLAN/GENEVE header Ethernet header + exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) + fi + + if [ "${type}" = "vxlan" ]; then + tun_a="vxlan_sys_4789" + elif [ "${type}" = "geneve" ]; then + tun_a="genev_sys_6081" + fi + + trace "" "${tun_a}" "${ns_b}" ${type}_b \ + "" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B \ + "" ovs_br0 "" veth-A-C \ + "${ns_c}" veth_C-A + + if [ ${family} -eq 4 ]; then + ping=ping + dst=${tunnel4_b_addr} + else + ping=${ping6} + dst=${tunnel6_b_addr} + fi + + # Create route exception by exceeding link layer MTU + mtu "" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "" ovs_br0 $((${ll_mtu} + 1000)) + mtu "" veth_A-C $((${ll_mtu} + 1000)) + mtu "${ns_c}" veth_C-A $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "" ${tun_a} $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + + run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1 + + # Check that exceptions were created + pmtu="$(route_get_dst_pmtu_from_exception "${ns_c}" ${dst})" + check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on Open vSwitch ${type} interface" +} + +test_pmtu_ipv4_ovs_vxlan4_exception() { + test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception vxlan 4 4 +} + +test_pmtu_ipv6_ovs_vxlan4_exception() { + test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception vxlan 6 4 +} + +test_pmtu_ipv4_ovs_geneve4_exception() { + test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception geneve 4 4 +} + +test_pmtu_ipv6_ovs_geneve4_exception() { + test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception geneve 6 4 +} + +test_pmtu_ipv4_ovs_vxlan6_exception() { + test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception vxlan 4 6 +} + +test_pmtu_ipv6_ovs_vxlan6_exception() { + test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception vxlan 6 6 +} + +test_pmtu_ipv4_ovs_geneve6_exception() { + test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception geneve 4 6 +} + +test_pmtu_ipv6_ovs_geneve6_exception() { + test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception geneve 6 6 +} + +test_pmtu_ipvX_over_fouY_or_gueY() { + inner_family=${1} + outer_family=${2} + encap=${3} + ll_mtu=4000 + + setup namespaces routing ${encap}${outer_family}${inner_family} || return 2 + trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B + + if [ ${inner_family} -eq 4 ]; then + ping=ping + dst=${tunnel4_b_addr} + else + ping=${ping6} + dst=${tunnel6_b_addr} + fi + + if [ "${encap}" = "gue" ]; then + encap_overhead=4 + else + encap_overhead=0 + fi + + if [ ${outer_family} -eq 4 ]; then + # IPv4 header UDP header + exp_mtu=$((${ll_mtu} - 20 - 8 - ${encap_overhead})) + else + # IPv6 header Option 4 UDP header + exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - ${encap_overhead})) + fi + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000)) + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} + + # Check that exception was created + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" + check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${encap} interface" +} + +test_pmtu_ipv4_fou4_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 4 4 fou +} + +test_pmtu_ipv6_fou4_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 6 4 fou +} + +test_pmtu_ipv4_fou6_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 4 6 fou +} + +test_pmtu_ipv6_fou6_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 6 6 fou +} + +test_pmtu_ipv4_gue4_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 4 4 gue +} + +test_pmtu_ipv6_gue4_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 6 4 gue +} + +test_pmtu_ipv4_gue6_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 4 6 gue +} + +test_pmtu_ipv6_gue6_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 6 6 gue +} + +test_pmtu_ipvX_over_ipvY_exception() { + inner=${1} + outer=${2} + ll_mtu=4000 + + setup namespaces routing ip${inner}ip${outer} || return 2 + + trace "${ns_a}" ip_a "${ns_b}" ip_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B + + if [ ${inner} -eq 4 ]; then + ping=ping + dst=${tunnel4_b_addr} + else + ping=${ping6} + dst=${tunnel6_b_addr} + fi + + if [ ${outer} -eq 4 ]; then + # IPv4 header + exp_mtu=$((${ll_mtu} - 20)) + else + # IPv6 header Option 4 + exp_mtu=$((${ll_mtu} - 40 - 8)) + fi + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ip_a $((${ll_mtu} + 1000)) || return + mtu "${ns_b}" ip_b $((${ll_mtu} + 1000)) || return + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} + + # Check that exception was created + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" + check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ip${inner}ip${outer} interface" +} + +test_pmtu_ipv4_ipv4_exception() { + test_pmtu_ipvX_over_ipvY_exception 4 4 +} + +test_pmtu_ipv6_ipv4_exception() { + test_pmtu_ipvX_over_ipvY_exception 6 4 +} + +test_pmtu_ipv4_ipv6_exception() { + test_pmtu_ipvX_over_ipvY_exception 4 6 +} + +test_pmtu_ipv6_ipv6_exception() { + test_pmtu_ipvX_over_ipvY_exception 6 6 +} + +test_pmtu_vti4_exception() { + setup namespaces veth vti4 xfrm4 || return 2 + trace "${ns_a}" veth_a "${ns_b}" veth_b \ + "${ns_a}" vti4_a "${ns_b}" vti4_b + + veth_mtu=1500 + vti_mtu=$((veth_mtu - 20)) + + # SPI SN IV ICV pad length next header + esp_payload_rfc4106=$((vti_mtu - 4 - 4 - 8 - 16 - 1 - 1)) + ping_payload=$((esp_payload_rfc4106 - 28)) + + mtu "${ns_a}" veth_a ${veth_mtu} + mtu "${ns_b}" veth_b ${veth_mtu} + mtu "${ns_a}" vti4_a ${vti_mtu} + mtu "${ns_b}" vti4_b ${vti_mtu} + + # Send DF packet without exceeding link layer MTU, check that no + # exception is created + run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr} + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})" + check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1 + + # Now exceed link layer MTU by one byte, check that exception is created + # with the right PMTU value + run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr} + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})" + check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))" +} + +test_pmtu_vti6_exception() { + setup namespaces veth vti6 xfrm6 || return 2 + trace "${ns_a}" veth_a "${ns_b}" veth_b \ + "${ns_a}" vti6_a "${ns_b}" vti6_b + fail=0 + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_a 4000 + mtu "${ns_b}" veth_b 4000 + mtu "${ns_a}" vti6_a 5000 + mtu "${ns_b}" vti6_b 5000 + run_cmd ${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr} + + # Check that exception was created + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})" + check_pmtu_value any "${pmtu}" "creating tunnel exceeding link layer MTU" || return 1 + + # Decrease tunnel MTU, check for PMTU decrease in route exception + mtu "${ns_a}" vti6_a 3000 + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})" + check_pmtu_value "3000" "${pmtu}" "decreasing tunnel MTU" || fail=1 + + # Increase tunnel MTU, check for PMTU increase in route exception + mtu "${ns_a}" vti6_a 9000 + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})" + check_pmtu_value "9000" "${pmtu}" "increasing tunnel MTU" || fail=1 + + return ${fail} +} + +test_pmtu_vti4_default_mtu() { + setup namespaces veth vti4 || return 2 + + # Check that MTU of vti device is MTU of veth minus IPv4 header length + veth_mtu="$(link_get_mtu "${ns_a}" veth_a)" + vti4_mtu="$(link_get_mtu "${ns_a}" vti4_a)" + if [ $((veth_mtu - vti4_mtu)) -ne 20 ]; then + err " vti MTU ${vti4_mtu} is not veth MTU ${veth_mtu} minus IPv4 header length" + return 1 + fi +} + +test_pmtu_vti6_default_mtu() { + setup namespaces veth vti6 || return 2 + + # Check that MTU of vti device is MTU of veth minus IPv6 header length + veth_mtu="$(link_get_mtu "${ns_a}" veth_a)" + vti6_mtu="$(link_get_mtu "${ns_a}" vti6_a)" + if [ $((veth_mtu - vti6_mtu)) -ne 40 ]; then + err " vti MTU ${vti6_mtu} is not veth MTU ${veth_mtu} minus IPv6 header length" + return 1 + fi +} + +test_pmtu_vti4_link_add_mtu() { + setup namespaces || return 2 + + run_cmd ${ns_a} ip link add vti4_a type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 + [ $? -ne 0 ] && err " vti not supported" && return 2 + run_cmd ${ns_a} ip link del vti4_a + + fail=0 + + min=68 + max=$((65535 - 20)) + # Check invalid values first + for v in $((min - 1)) $((max + 1)); do + run_cmd ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 + # This can fail, or MTU can be adjusted to a proper value + [ $? -ne 0 ] && continue + mtu="$(link_get_mtu "${ns_a}" vti4_a)" + if [ ${mtu} -lt ${min} -o ${mtu} -gt ${max} ]; then + err " vti tunnel created with invalid MTU ${mtu}" + fail=1 + fi + run_cmd ${ns_a} ip link del vti4_a + done + + # Now check valid values + for v in ${min} 1300 ${max}; do + run_cmd ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10 + mtu="$(link_get_mtu "${ns_a}" vti4_a)" + run_cmd ${ns_a} ip link del vti4_a + if [ "${mtu}" != "${v}" ]; then + err " vti MTU ${mtu} doesn't match configured value ${v}" + fail=1 + fi + done + + return ${fail} +} + +test_pmtu_vti6_link_add_mtu() { + setup namespaces || return 2 + + run_cmd ${ns_a} ip link add vti6_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 + [ $? -ne 0 ] && err " vti6 not supported" && return 2 + run_cmd ${ns_a} ip link del vti6_a + + fail=0 + + min=68 # vti6 can carry IPv4 packets too + max=$((65535 - 40)) + # Check invalid values first + for v in $((min - 1)) $((max + 1)); do + run_cmd ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 + # This can fail, or MTU can be adjusted to a proper value + [ $? -ne 0 ] && continue + mtu="$(link_get_mtu "${ns_a}" vti6_a)" + if [ ${mtu} -lt ${min} -o ${mtu} -gt ${max} ]; then + err " vti6 tunnel created with invalid MTU ${v}" + fail=1 + fi + run_cmd ${ns_a} ip link del vti6_a + done + + # Now check valid values + for v in 68 1280 1300 $((65535 - 40)); do + run_cmd ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10 + mtu="$(link_get_mtu "${ns_a}" vti6_a)" + run_cmd ${ns_a} ip link del vti6_a + if [ "${mtu}" != "${v}" ]; then + err " vti6 MTU ${mtu} doesn't match configured value ${v}" + fail=1 + fi + done + + return ${fail} +} + +test_pmtu_vti6_link_change_mtu() { + setup namespaces || return 2 + + run_cmd ${ns_a} ip link add dummy0 mtu 1500 type dummy + [ $? -ne 0 ] && err " dummy not supported" && return 2 + run_cmd ${ns_a} ip link add dummy1 mtu 3000 type dummy + run_cmd ${ns_a} ip link set dummy0 up + run_cmd ${ns_a} ip link set dummy1 up + + run_cmd ${ns_a} ip addr add ${dummy6_0_prefix}1/${dummy6_mask} dev dummy0 + run_cmd ${ns_a} ip addr add ${dummy6_1_prefix}1/${dummy6_mask} dev dummy1 + + fail=0 + + # Create vti6 interface bound to device, passing MTU, check it + run_cmd ${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_prefix}2 local ${dummy6_0_prefix}1 + mtu="$(link_get_mtu "${ns_a}" vti6_a)" + if [ ${mtu} -ne 1300 ]; then + err " vti6 MTU ${mtu} doesn't match configured value 1300" + fail=1 + fi + + # Move to another device with different MTU, without passing MTU, check + # MTU is adjusted + run_cmd ${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_prefix}2 local ${dummy6_1_prefix}1 + mtu="$(link_get_mtu "${ns_a}" vti6_a)" + if [ ${mtu} -ne $((3000 - 40)) ]; then + err " vti MTU ${mtu} is not dummy MTU 3000 minus IPv6 header length" + fail=1 + fi + + # Move it back, passing MTU, check MTU is not overridden + run_cmd ${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_prefix}2 local ${dummy6_0_prefix}1 + mtu="$(link_get_mtu "${ns_a}" vti6_a)" + if [ ${mtu} -ne 1280 ]; then + err " vti6 MTU ${mtu} doesn't match configured value 1280" + fail=1 + fi + + return ${fail} +} + +check_command() { + cmd=${1} + + if ! which ${cmd} > /dev/null 2>&1; then + err " missing required command: '${cmd}'" + return 1 + fi + return 0 +} + +test_cleanup_vxlanX_exception() { + outer="${1}" + encap="vxlan" + ll_mtu=4000 + + check_command taskset || return 2 + cpu_list=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2) + + setup namespaces routing ${encap}${outer} || return 2 + trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000)) + + # Fill exception cache for multiple CPUs (2) + # we can always use inner IPv4 for that + for cpu in ${cpu_list}; do + run_cmd taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr} + done + + ${ns_a} ip link del dev veth_A-R1 & + iplink_pid=$! + sleep 1 + if [ "$(cat /proc/${iplink_pid}/cmdline 2>/dev/null | tr -d '\0')" = "iplinkdeldevveth_A-R1" ]; then + err " can't delete veth device in a timely manner, PMTU dst likely leaked" + return 1 + fi +} + +test_cleanup_ipv6_exception() { + test_cleanup_vxlanX_exception 6 +} + +test_cleanup_ipv4_exception() { + test_cleanup_vxlanX_exception 4 +} + +run_test() { + ( + tname="$1" + tdesc="$2" + + unset IFS + + # Since cleanup() relies on variables modified by this subshell, it + # has to run in this context. + trap cleanup EXIT + + if [ "$VERBOSE" = "1" ]; then + printf "\n##########################################################################\n\n" + fi + + eval test_${tname} + ret=$? + + if [ $ret -eq 0 ]; then + printf "TEST: %-60s [ OK ]\n" "${tdesc}" + elif [ $ret -eq 1 ]; then + printf "TEST: %-60s [FAIL]\n" "${tdesc}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "Pausing. Hit enter to continue" + read a + fi + err_flush + exit 1 + elif [ $ret -eq 2 ]; then + printf "TEST: %-60s [SKIP]\n" "${tdesc}" + err_flush + fi + + return $ret + ) + ret=$? + [ $ret -ne 0 ] && exitcode=1 + + return $ret +} + +run_test_nh() { + tname="$1" + tdesc="$2" + + USE_NH=yes + run_test "${tname}" "${tdesc} - nexthop objects" + USE_NH=no +} + +test_list_flush_ipv4_exception() { + setup namespaces routing || return 2 + trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \ + "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \ + "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2 + + dst_prefix1="${prefix4}.${b_r1}." + dst2="${prefix4}.${b_r2}.1" + + # Set up initial MTU values + mtu "${ns_a}" veth_A-R1 2000 + mtu "${ns_r1}" veth_R1-A 2000 + mtu "${ns_r1}" veth_R1-B 1500 + mtu "${ns_b}" veth_B-R1 1500 + + mtu "${ns_a}" veth_A-R2 2000 + mtu "${ns_r2}" veth_R2-A 2000 + mtu "${ns_r2}" veth_R2-B 1500 + mtu "${ns_b}" veth_B-R2 1500 + + fail=0 + + # Add 100 addresses for veth endpoint on B reached by default A route + for i in $(seq 100 199); do + run_cmd ${ns_b} ip addr add "${dst_prefix1}${i}" dev veth_B-R1 + done + + # Create 100 cached route exceptions for path via R1, one via R2. Note + # that with IPv4 we need to actually cause a route lookup that matches + # the exception caused by ICMP, in order to actually have a cached + # route, so we need to ping each destination twice + for i in $(seq 100 199); do + run_cmd ${ns_a} ping -q -M want -i 0.1 -c 2 -s 1800 "${dst_prefix1}${i}" + done + run_cmd ${ns_a} ping -q -M want -i 0.1 -c 2 -s 1800 "${dst2}" + + if [ "$(${ns_a} ip -oneline route list cache | wc -l)" -ne 101 ]; then + err " can't list cached exceptions" + fail=1 + fi + + run_cmd ${ns_a} ip route flush cache + pmtu1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst_prefix}1)" + pmtu2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst_prefix}2)" + if [ -n "${pmtu1}" ] || [ -n "${pmtu2}" ] || \ + [ -n "$(${ns_a} ip route list cache)" ]; then + err " can't flush cached exceptions" + fail=1 + fi + + return ${fail} +} + +test_list_flush_ipv6_exception() { + setup namespaces routing || return 2 + trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \ + "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \ + "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2 + + dst_prefix1="${prefix6}:${b_r1}::" + dst2="${prefix6}:${b_r2}::1" + + # Set up initial MTU values + mtu "${ns_a}" veth_A-R1 2000 + mtu "${ns_r1}" veth_R1-A 2000 + mtu "${ns_r1}" veth_R1-B 1500 + mtu "${ns_b}" veth_B-R1 1500 + + mtu "${ns_a}" veth_A-R2 2000 + mtu "${ns_r2}" veth_R2-A 2000 + mtu "${ns_r2}" veth_R2-B 1500 + mtu "${ns_b}" veth_B-R2 1500 + + fail=0 + + # Add 100 addresses for veth endpoint on B reached by default A route + for i in $(seq 100 199); do + run_cmd ${ns_b} ip addr add "${dst_prefix1}${i}" dev veth_B-R1 + done + + # Create 100 cached route exceptions for path via R1, one via R2 + for i in $(seq 100 199); do + run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s 1800 "${dst_prefix1}${i}" + done + run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s 1800 "${dst2}" + if [ "$(${ns_a} ip -oneline -6 route list cache | wc -l)" -ne 101 ]; then + err " can't list cached exceptions" + fail=1 + fi + + run_cmd ${ns_a} ip -6 route flush cache + pmtu1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst_prefix1}100")" + pmtu2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + if [ -n "${pmtu1}" ] || [ -n "${pmtu2}" ] || \ + [ -n "$(${ns_a} ip -6 route list cache)" ]; then + err " can't flush cached exceptions" + fail=1 + fi + + return ${fail} +} + +test_pmtu_ipvX_route_change() { + family=${1} + + setup namespaces routing || return 2 + trace "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_r1}" veth_R1-B "${ns_b}" veth_B-R1 \ + "${ns_a}" veth_A-R2 "${ns_r2}" veth_R2-A \ + "${ns_r2}" veth_R2-B "${ns_b}" veth_B-R2 + + if [ ${family} -eq 4 ]; then + ping=ping + dst1="${prefix4}.${b_r1}.1" + dst2="${prefix4}.${b_r2}.1" + gw="${prefix4}.${a_r1}.2" + else + ping=${ping6} + dst1="${prefix6}:${b_r1}::1" + dst2="${prefix6}:${b_r2}::1" + gw="${prefix6}:${a_r1}::2" + fi + + # Set up initial MTU values + mtu "${ns_a}" veth_A-R1 2000 + mtu "${ns_r1}" veth_R1-A 2000 + mtu "${ns_r1}" veth_R1-B 1400 + mtu "${ns_b}" veth_B-R1 1400 + + mtu "${ns_a}" veth_A-R2 2000 + mtu "${ns_r2}" veth_R2-A 2000 + mtu "${ns_r2}" veth_R2-B 1500 + mtu "${ns_b}" veth_B-R2 1500 + + # Create route exceptions + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} + run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} + + # Check that exceptions have been created with the correct PMTU + pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})" + check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1 + pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" + check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1 + + # Replace the route from A to R1 + run_cmd ${ns_a} ip route change default via ${gw} + + # Delete the device in A + run_cmd ${ns_a} ip link del "veth_A-R1" +} + +test_pmtu_ipv4_route_change() { + test_pmtu_ipvX_route_change 4 +} + +test_pmtu_ipv6_route_change() { + test_pmtu_ipvX_route_change 6 +} + +usage() { + echo + echo "$0 [OPTIONS] [TEST]..." + echo "If no TEST argument is given, all tests will be run." + echo + echo "Options" + echo " --trace: capture traffic to TEST_INTERFACE.pcap" + echo + echo "Available tests${tests}" + exit 1 +} + +################################################################################ +# +exitcode=0 +desc=0 + +while getopts :ptv o +do + case $o in + p) PAUSE_ON_FAIL=yes;; + v) VERBOSE=1;; + t) if which tcpdump > /dev/null 2>&1; then + TRACING=1 + else + echo "=== tcpdump not available, tracing disabled" + fi + ;; + *) usage;; + esac +done +shift $(($OPTIND-1)) + +IFS=" +" + +for arg do + # Check first that all requested tests are available before running any + command -v > /dev/null "test_${arg}" || { echo "=== Test ${arg} not found"; usage; } +done + +trap cleanup EXIT + +# start clean +cleanup + +HAVE_NH=no +ip nexthop ls >/dev/null 2>&1 +[ $? -eq 0 ] && HAVE_NH=yes + +name="" +desc="" +rerun_nh=0 +for t in ${tests}; do + [ "${name}" = "" ] && name="${t}" && continue + [ "${desc}" = "" ] && desc="${t}" && continue + + if [ "${HAVE_NH}" = "yes" ]; then + rerun_nh="${t}" + fi + + run_this=1 + for arg do + [ "${arg}" != "${arg#--*}" ] && continue + [ "${arg}" = "${name}" ] && run_this=1 && break + run_this=0 + done + if [ $run_this -eq 1 ]; then + run_test "${name}" "${desc}" + # if test was skipped no need to retry with nexthop objects + [ $? -eq 2 ] && rerun_nh=0 + + if [ "${rerun_nh}" = "1" ]; then + run_test_nh "${name}" "${desc}" + fi + fi + name="" + desc="" + rerun_nh=0 +done + +exit ${exitcode} |