Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

188 files changed, 60792 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore
new file mode 100644
index 000000000..61ae899cf
--- /dev/null
+++ b/tools/testing/selftests/net/.gitignore
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only
+ipsec
+msg_zerocopy
+socket
+psock_fanout
+psock_snd
+psock_tpacket
+reuseport_addr_any
+reuseport_bpf
+reuseport_bpf_cpu
+reuseport_bpf_numa
+reuseport_dualstack
+reuseaddr_conflict
+tcp_mmap
+udpgso
+udpgso_bench_rx
+udpgso_bench_tx
+tcp_inq
+tls
+txring_overwrite
+ip_defrag
+ipv6_flowlabel
+ipv6_flowlabel_mgr
+so_txtime
+tcp_fastopen_backup_key
+nettest
+fin_ack_lat
+reuseaddr_ports_exhausted
+hwtstamp_config
+rxtimestamp
+timestamping
+txtimestamp
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
new file mode 100644
index 000000000..ef352477c
--- /dev/null
+++ b/tools/testing/selftests/net/Makefile
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for net selftests
+
+CFLAGS =  -Wall -Wl,--no-as-needed -O2 -g
+CFLAGS += -I../../../../usr/include/
+
+TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh \
+	      rtnetlink.sh xfrm_policy.sh test_blackhole_dev.sh
+TEST_PROGS += fib_tests.sh fib-onlink-tests.sh pmtu.sh udpgso.sh ip_defrag.sh
+TEST_PROGS += udpgso_bench.sh fib_rule_tests.sh msg_zerocopy.sh psock_snd.sh
+TEST_PROGS += udpgro_bench.sh udpgro.sh test_vxlan_under_vrf.sh reuseport_addr_any.sh
+TEST_PROGS += test_vxlan_fdb_changelink.sh so_txtime.sh ipv6_flowlabel.sh
+TEST_PROGS += tcp_fastopen_backup_key.sh fcnal-test.sh l2tp.sh traceroute.sh
+TEST_PROGS += fin_ack_lat.sh fib_nexthop_multiprefix.sh fib_nexthops.sh
+TEST_PROGS += altnames.sh icmp_redirect.sh ip6_gre_headroom.sh
+TEST_PROGS += route_localnet.sh
+TEST_PROGS += reuseaddr_ports_exhausted.sh
+TEST_PROGS += txtimestamp.sh
+TEST_PROGS += vrf-xfrm-tests.sh
+TEST_PROGS += rxtimestamp.sh
+TEST_PROGS += devlink_port_split.py
+TEST_PROGS += drop_monitor_tests.sh
+TEST_PROGS += vrf_route_leaking.sh
+TEST_PROGS_EXTENDED := in_netns.sh
+TEST_GEN_FILES =  socket nettest
+TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any
+TEST_GEN_FILES += tcp_mmap tcp_inq psock_snd txring_overwrite
+TEST_GEN_FILES += udpgso udpgso_bench_tx udpgso_bench_rx ip_defrag
+TEST_GEN_FILES += so_txtime ipv6_flowlabel ipv6_flowlabel_mgr
+TEST_GEN_FILES += tcp_fastopen_backup_key
+TEST_GEN_FILES += fin_ack_lat
+TEST_GEN_FILES += reuseaddr_ports_exhausted
+TEST_GEN_FILES += hwtstamp_config rxtimestamp timestamping txtimestamp
+TEST_GEN_FILES += ipsec
+TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa
+TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls
+
+KSFT_KHDR_INSTALL := 1
+include ../lib.mk
+
+$(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma
+$(OUTPUT)/tcp_mmap: LDLIBS += -lpthread
+$(OUTPUT)/tcp_inq: LDLIBS += -lpthread
diff --git a/tools/testing/selftests/net/altnames.sh b/tools/testing/selftests/net/altnames.sh
new file mode 100755
index 000000000..1ef9e4159
--- /dev/null
+++ b/tools/testing/selftests/net/altnames.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/forwarding
+
+ALL_TESTS="altnames_test"
+NUM_NETIFS=0
+source $lib_dir/lib.sh
+
+DUMMY_DEV=dummytest
+SHORT_NAME=shortname
+LONG_NAME=someveryveryveryveryveryverylongname
+
+altnames_test()
+{
+	RET=0
+	local output
+	local name
+
+	ip link property add $DUMMY_DEV altname $SHORT_NAME
+	check_err $? "Failed to add short alternative name"
+
+	output=$(ip -j -p link show $SHORT_NAME)
+	check_err $? "Failed to do link show with short alternative name"
+
+	name=$(echo $output | jq -e -r ".[0].altnames[0]")
+	check_err $? "Failed to get short alternative name from link show JSON"
+
+	[ "$name" == "$SHORT_NAME" ]
+	check_err $? "Got unexpected short alternative name from link show JSON"
+
+	ip -j -p link show $DUMMY_DEV &>/dev/null
+	check_err $? "Failed to do link show with original name"
+
+	ip link property add $DUMMY_DEV altname $LONG_NAME
+	check_err $? "Failed to add long alternative name"
+
+	output=$(ip -j -p link show $LONG_NAME)
+	check_err $? "Failed to do link show with long alternative name"
+
+	name=$(echo $output | jq -e -r ".[0].altnames[1]")
+	check_err $? "Failed to get long alternative name from link show JSON"
+
+	[ "$name" == "$LONG_NAME" ]
+	check_err $? "Got unexpected long alternative name from link show JSON"
+
+	ip link property del $DUMMY_DEV altname $SHORT_NAME
+	check_err $? "Failed to delete short alternative name"
+
+	ip -j -p link show $SHORT_NAME &>/dev/null
+	check_fail $? "Unexpected success while trying to do link show with deleted short alternative name"
+
+	# long name is left there on purpose to be removed alongside the device
+
+	log_test "altnames test"
+}
+
+setup_prepare()
+{
+	ip link add name $DUMMY_DEV type dummy
+}
+
+cleanup()
+{
+	pre_cleanup
+	ip link del name $DUMMY_DEV
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
new file mode 100644
index 000000000..4d5df8e1e
--- /dev/null
+++ b/tools/testing/selftests/net/config
@@ -0,0 +1,36 @@
+CONFIG_USER_NS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_TEST_BPF=m
+CONFIG_NUMA=y
+CONFIG_NET_VRF=y
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_IPV6=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_VETH=y
+CONFIG_NET_IPVTI=y
+CONFIG_IPV6_VTI=y
+CONFIG_DUMMY=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_IFB=y
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_NAT=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_IPV6=y
+CONFIG_NF_TABLES_IPV4=y
+CONFIG_NFT_NAT=m
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_ETF=m
+CONFIG_NET_SCH_NETEM=y
+CONFIG_TEST_BLACKHOLE_DEV=m
+CONFIG_KALLSYMS=y
+CONFIG_TRACEPOINTS=y
+CONFIG_NET_DROP_MONITOR=m
+CONFIG_NETDEVSIM=m
+CONFIG_NET_FOU=m
diff --git a/tools/testing/selftests/net/devlink_port_split.py b/tools/testing/selftests/net/devlink_port_split.py
new file mode 100755
index 000000000..f0fbd7367
--- /dev/null
+++ b/tools/testing/selftests/net/devlink_port_split.py
@@ -0,0 +1,307 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+from subprocess import PIPE, Popen
+import json
+import time
+import argparse
+import collections
+import sys
+
+#
+# Test port split configuration using devlink-port lanes attribute.
+# The test is skipped in case the attribute is not available.
+#
+# First, check that all the ports with 1 lane fail to split.
+# Second, check that all the ports with more than 1 lane can be split
+# to all valid configurations (e.g., split to 2, split to 4 etc.)
+#
+
+
+Port = collections.namedtuple('Port', 'bus_info name')
+
+
+def run_command(cmd, should_fail=False):
+    """
+    Run a command in subprocess.
+    Return: Tuple of (stdout, stderr).
+    """
+
+    p = Popen(cmd, stdout=PIPE, stderr=PIPE, shell=True)
+    stdout, stderr = p.communicate()
+    stdout, stderr = stdout.decode(), stderr.decode()
+
+    if stderr != "" and not should_fail:
+        print("Error sending command: %s" % cmd)
+        print(stdout)
+        print(stderr)
+    return stdout, stderr
+
+
+class devlink_ports(object):
+    """
+    Class that holds information on the devlink ports, required to the tests;
+    if_names: A list of interfaces in the devlink ports.
+    """
+
+    def get_if_names(dev):
+        """
+        Get a list of physical devlink ports.
+        Return: Array of tuples (bus_info/port, if_name).
+        """
+
+        arr = []
+
+        cmd = "devlink -j port show"
+        stdout, stderr = run_command(cmd)
+        assert stderr == ""
+        ports = json.loads(stdout)['port']
+
+        validate_devlink_output(ports, 'flavour')
+
+        for port in ports:
+            if dev in port:
+                if ports[port]['flavour'] == 'physical':
+                    arr.append(Port(bus_info=port, name=ports[port]['netdev']))
+
+        return arr
+
+    def __init__(self, dev):
+        self.if_names = devlink_ports.get_if_names(dev)
+
+
+def get_max_lanes(port):
+    """
+    Get the $port's maximum number of lanes.
+    Return: number of lanes, e.g. 1, 2, 4 and 8.
+    """
+
+    cmd = "devlink -j port show %s" % port
+    stdout, stderr = run_command(cmd)
+    assert stderr == ""
+    values = list(json.loads(stdout)['port'].values())[0]
+
+    if 'lanes' in values:
+        lanes = values['lanes']
+    else:
+        lanes = 0
+    return lanes
+
+
+def get_split_ability(port):
+    """
+    Get the $port split ability.
+    Return: split ability, true or false.
+    """
+
+    cmd = "devlink -j port show %s" % port.name
+    stdout, stderr = run_command(cmd)
+    assert stderr == ""
+    values = list(json.loads(stdout)['port'].values())[0]
+
+    return values['splittable']
+
+
+def split(k, port, should_fail=False):
+    """
+    Split $port into $k ports.
+    If should_fail == True, the split should fail. Otherwise, should pass.
+    Return: Array of sub ports after splitting.
+            If the $port wasn't split, the array will be empty.
+    """
+
+    cmd = "devlink port split %s count %s" % (port.bus_info, k)
+    stdout, stderr = run_command(cmd, should_fail=should_fail)
+
+    if should_fail:
+        if not test(stderr != "", "%s is unsplittable" % port.name):
+            print("split an unsplittable port %s" % port.name)
+            return create_split_group(port, k)
+    else:
+        if stderr == "":
+            return create_split_group(port, k)
+        print("didn't split a splittable port %s" % port.name)
+
+    return []
+
+
+def unsplit(port):
+    """
+    Unsplit $port.
+    """
+
+    cmd = "devlink port unsplit %s" % port
+    stdout, stderr = run_command(cmd)
+    test(stderr == "", "Unsplit port %s" % port)
+
+
+def exists(port, dev):
+    """
+    Check if $port exists in the devlink ports.
+    Return: True is so, False otherwise.
+    """
+
+    return any(dev_port.name == port
+               for dev_port in devlink_ports.get_if_names(dev))
+
+
+def exists_and_lanes(ports, lanes, dev):
+    """
+    Check if every port in the list $ports exists in the devlink ports and has
+    $lanes number of lanes after splitting.
+    Return: True if both are True, False otherwise.
+    """
+
+    for port in ports:
+        max_lanes = get_max_lanes(port)
+        if not exists(port, dev):
+            print("port %s doesn't exist in devlink ports" % port)
+            return False
+        if max_lanes != lanes:
+            print("port %s has %d lanes, but %s were expected"
+                  % (port, lanes, max_lanes))
+            return False
+    return True
+
+
+def test(cond, msg):
+    """
+    Check $cond and print a message accordingly.
+    Return: True is pass, False otherwise.
+    """
+
+    if cond:
+        print("TEST: %-60s [ OK ]" % msg)
+    else:
+        print("TEST: %-60s [FAIL]" % msg)
+
+    return cond
+
+
+def create_split_group(port, k):
+    """
+    Create the split group for $port.
+    Return: Array with $k elements, which are the split port group.
+    """
+
+    return list(port.name + "s" + str(i) for i in range(k))
+
+
+def split_unsplittable_port(port, k):
+    """
+    Test that splitting of unsplittable port fails.
+    """
+
+    # split to max
+    new_split_group = split(k, port, should_fail=True)
+
+    if new_split_group != []:
+        unsplit(port.bus_info)
+
+
+def split_splittable_port(port, k, lanes, dev):
+    """
+    Test that splitting of splittable port passes correctly.
+    """
+
+    new_split_group = split(k, port)
+
+    # Once the split command ends, it takes some time to the sub ifaces'
+    # to get their names. Use udevadm to continue only when all current udev
+    # events are handled.
+    cmd = "udevadm settle"
+    stdout, stderr = run_command(cmd)
+    assert stderr == ""
+
+    if new_split_group != []:
+        test(exists_and_lanes(new_split_group, lanes/k, dev),
+             "split port %s into %s" % (port.name, k))
+
+    unsplit(port.bus_info)
+
+
+def validate_devlink_output(devlink_data, target_property=None):
+    """
+    Determine if test should be skipped by checking:
+      1. devlink_data contains values
+      2. The target_property exist in devlink_data
+    """
+    skip_reason = None
+    if any(devlink_data.values()):
+        if target_property:
+            skip_reason = "{} not found in devlink output, test skipped".format(target_property)
+            for key in devlink_data:
+                if target_property in devlink_data[key]:
+                    skip_reason = None
+    else:
+        skip_reason = 'devlink output is empty, test skipped'
+
+    if skip_reason:
+        print(skip_reason)
+        sys.exit(KSFT_SKIP)
+
+
+def make_parser():
+    parser = argparse.ArgumentParser(description='A test for port splitting.')
+    parser.add_argument('--dev',
+                        help='The devlink handle of the device under test. ' +
+                             'The default is the first registered devlink ' +
+                             'handle.')
+
+    return parser
+
+
+def main(cmdline=None):
+    parser = make_parser()
+    args = parser.parse_args(cmdline)
+
+    dev = args.dev
+    if not dev:
+        cmd = "devlink -j dev show"
+        stdout, stderr = run_command(cmd)
+        assert stderr == ""
+
+        validate_devlink_output(json.loads(stdout))
+        devs = json.loads(stdout)['dev']
+        dev = list(devs.keys())[0]
+
+    cmd = "devlink dev show %s" % dev
+    stdout, stderr = run_command(cmd)
+    if stderr != "":
+        print("devlink device %s can not be found" % dev)
+        sys.exit(1)
+
+    ports = devlink_ports(dev)
+
+    found_max_lanes = False
+    for port in ports.if_names:
+        max_lanes = get_max_lanes(port.name)
+
+        # If max lanes is 0, do not test port splitting at all
+        if max_lanes == 0:
+            continue
+
+        # If 1 lane, shouldn't be able to split
+        elif max_lanes == 1:
+            test(not get_split_ability(port),
+                 "%s should not be able to split" % port.name)
+            split_unsplittable_port(port, max_lanes)
+
+        # Else, splitting should pass and all the split ports should exist.
+        else:
+            lane = max_lanes
+            test(get_split_ability(port),
+                 "%s should be able to split" % port.name)
+            while lane > 1:
+                split_splittable_port(port, lane, max_lanes, dev)
+
+                lane //= 2
+        found_max_lanes = True
+
+    if not found_max_lanes:
+        print(f"Test not started, no port of device {dev} reports max_lanes")
+        sys.exit(KSFT_SKIP)
+
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/testing/selftests/net/drop_monitor_tests.sh b/tools/testing/selftests/net/drop_monitor_tests.sh
new file mode 100755
index 000000000..b7650e30d
--- /dev/null
+++ b/tools/testing/selftests/net/drop_monitor_tests.sh
@@ -0,0 +1,215 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking drop monitor functionality.
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# all tests in this script. Can be overridden with -t option
+TESTS="
+	sw_drops
+	hw_drops
+"
+
+IP="ip -netns ns1"
+TC="tc -netns ns1"
+DEVLINK="devlink -N ns1"
+NS_EXEC="ip netns exec ns1"
+NETDEVSIM_PATH=/sys/bus/netdevsim/
+DEV_ADDR=1337
+DEV=netdevsim${DEV_ADDR}
+DEVLINK_DEV=netdevsim/${DEV}
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "    TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "    TEST: %-60s  [FAIL]\n" "${msg}"
+	fi
+}
+
+setup()
+{
+	modprobe netdevsim &> /dev/null
+
+	set -e
+	ip netns add ns1
+	$IP link add dummy10 up type dummy
+
+	$NS_EXEC echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device
+	udevadm settle
+	local netdev=$($NS_EXEC ls ${NETDEVSIM_PATH}/devices/${DEV}/net/)
+	$IP link set dev $netdev up
+
+	set +e
+}
+
+cleanup()
+{
+	$NS_EXEC echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device
+	ip netns del ns1
+}
+
+sw_drops_test()
+{
+	echo
+	echo "Software drops test"
+
+	setup
+
+	local dir=$(mktemp -d)
+
+	$TC qdisc add dev dummy10 clsact
+	$TC filter add dev dummy10 egress pref 1 handle 101 proto ip \
+		flower dst_ip 192.0.2.10 action drop
+
+	$NS_EXEC mausezahn dummy10 -a 00:11:22:33:44:55 -b 00:aa:bb:cc:dd:ee \
+		-A 192.0.2.1 -B 192.0.2.10 -t udp sp=12345,dp=54321 -c 0 -q \
+		-d 100msec &
+	timeout 5 dwdump -o sw -w ${dir}/packets.pcap
+	(( $(tshark -r ${dir}/packets.pcap \
+		-Y 'ip.dst == 192.0.2.10' 2> /dev/null | wc -l) != 0))
+	log_test $? 0 "Capturing active software drops"
+
+	rm ${dir}/packets.pcap
+
+	{ kill %% && wait %%; } 2>/dev/null
+	timeout 5 dwdump -o sw -w ${dir}/packets.pcap
+	(( $(tshark -r ${dir}/packets.pcap \
+		-Y 'ip.dst == 192.0.2.10' 2> /dev/null | wc -l) == 0))
+	log_test $? 0 "Capturing inactive software drops"
+
+	rm -r $dir
+
+	cleanup
+}
+
+hw_drops_test()
+{
+	echo
+	echo "Hardware drops test"
+
+	setup
+
+	local dir=$(mktemp -d)
+
+	$DEVLINK trap set $DEVLINK_DEV trap blackhole_route action trap
+	timeout 5 dwdump -o hw -w ${dir}/packets.pcap
+	(( $(tshark -r ${dir}/packets.pcap \
+		-Y 'net_dm.hw_trap_name== blackhole_route' 2> /dev/null \
+		| wc -l) != 0))
+	log_test $? 0 "Capturing active hardware drops"
+
+	rm ${dir}/packets.pcap
+
+	$DEVLINK trap set $DEVLINK_DEV trap blackhole_route action drop
+	timeout 5 dwdump -o hw -w ${dir}/packets.pcap
+	(( $(tshark -r ${dir}/packets.pcap \
+		-Y 'net_dm.hw_trap_name== blackhole_route' 2> /dev/null \
+		| wc -l) == 0))
+	log_test $? 0 "Capturing inactive hardware drops"
+
+	rm -r $dir
+
+	cleanup
+}
+
+################################################################################
+# usage
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+
+        -t <test>   Test(s) to run (default: all)
+                    (options: $TESTS)
+EOF
+}
+
+################################################################################
+# main
+
+while getopts ":t:h" opt; do
+	case $opt in
+		t) TESTS=$OPTARG;;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v devlink)" ]; then
+	echo "SKIP: Could not run test without devlink tool"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v tshark)" ]; then
+	echo "SKIP: Could not run test without tshark tool"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v dwdump)" ]; then
+	echo "SKIP: Could not run test without dwdump tool"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v udevadm)" ]; then
+	echo "SKIP: Could not run test without udevadm tool"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v timeout)" ]; then
+	echo "SKIP: Could not run test without timeout tool"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v mausezahn)" ]; then
+	echo "SKIP: Could not run test without mausezahn tool"
+	exit $ksft_skip
+fi
+
+tshark -G fields 2> /dev/null | grep -q net_dm
+if [ $? -ne 0 ]; then
+	echo "SKIP: tshark too old, missing net_dm dissector"
+	exit $ksft_skip
+fi
+
+# start clean
+cleanup &> /dev/null
+
+for t in $TESTS
+do
+	case $t in
+	sw_drops|sw)			sw_drops_test;;
+	hw_drops|hw)			hw_drops_test;;
+
+	help) echo "Test names: $TESTS"; exit 0;;
+	esac
+done
+
+if [ "$TESTS" != "none" ]; then
+	printf "\nTests passed: %3d\n" ${nsuccess}
+	printf "Tests failed: %3d\n"   ${nfail}
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
new file mode 100755
index 000000000..e13b0fb63
--- /dev/null
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -0,0 +1,4034 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019 David Ahern <dsahern@gmail.com>. All rights reserved.
+#
+# IPv4 and IPv6 functional tests focusing on VRF and routing lookups
+# for various permutations:
+#   1. icmp, tcp, udp and netfilter
+#   2. client, server, no-server
+#   3. global address on interface
+#   4. global address on 'lo'
+#   5. remote and local traffic
+#   6. VRF and non-VRF permutations
+#
+# Setup:
+#                     ns-A     |     ns-B
+# No VRF case:
+#    [ lo ]         [ eth1 ]---|---[ eth1 ]      [ lo ]
+#                                                remote address
+# VRF case:
+#         [ red ]---[ eth1 ]---|---[ eth1 ]      [ lo ]
+#
+# ns-A:
+#     eth1: 172.16.1.1/24, 2001:db8:1::1/64
+#       lo: 127.0.0.1/8, ::1/128
+#           172.16.2.1/32, 2001:db8:2::1/128
+#      red: 127.0.0.1/8, ::1/128
+#           172.16.3.1/32, 2001:db8:3::1/128
+#
+# ns-B:
+#     eth1: 172.16.1.2/24, 2001:db8:1::2/64
+#      lo2: 127.0.0.1/8, ::1/128
+#           172.16.2.2/32, 2001:db8:2::2/128
+#
+# ns-A to ns-C connection - only for VRF and same config
+# as ns-A to ns-B
+#
+# server / client nomenclature relative to ns-A
+
+VERBOSE=0
+
+NSA_DEV=eth1
+NSA_DEV2=eth2
+NSB_DEV=eth1
+NSC_DEV=eth2
+VRF=red
+VRF_TABLE=1101
+
+# IPv4 config
+NSA_IP=172.16.1.1
+NSB_IP=172.16.1.2
+VRF_IP=172.16.3.1
+NS_NET=172.16.1.0/24
+
+# IPv6 config
+NSA_IP6=2001:db8:1::1
+NSB_IP6=2001:db8:1::2
+VRF_IP6=2001:db8:3::1
+NS_NET6=2001:db8:1::/120
+
+NSA_LO_IP=172.16.2.1
+NSB_LO_IP=172.16.2.2
+NSA_LO_IP6=2001:db8:2::1
+NSB_LO_IP6=2001:db8:2::2
+
+MD5_PW=abc123
+MD5_WRONG_PW=abc1234
+
+MCAST=ff02::1
+# set after namespace create
+NSA_LINKIP6=
+NSB_LINKIP6=
+
+NSA=ns-A
+NSB=ns-B
+NSC=ns-C
+
+NSA_CMD="ip netns exec ${NSA}"
+NSB_CMD="ip netns exec ${NSB}"
+NSC_CMD="ip netns exec ${NSC}"
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+# Check if FIPS mode is enabled
+if [ -f /proc/sys/crypto/fips_enabled ]; then
+	fips_enabled=`cat /proc/sys/crypto/fips_enabled`
+else
+	fips_enabled=0
+fi
+
+################################################################################
+# utilities
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	[ "${VERBOSE}" = "1" ] && echo
+
+	if [ ${rc} -eq ${expected} ]; then
+		nsuccess=$((nsuccess+1))
+		printf "TEST: %-70s  [ OK ]\n" "${msg}"
+	else
+		nfail=$((nfail+1))
+		printf "TEST: %-70s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+
+	if [ "${PAUSE}" = "yes" ]; then
+		echo
+		echo "hit enter to continue, 'q' to quit"
+		read a
+		[ "$a" = "q" ] && exit 1
+	fi
+
+	kill_procs
+}
+
+log_test_addr()
+{
+	local addr=$1
+	local rc=$2
+	local expected=$3
+	local msg="$4"
+	local astr
+
+	astr=$(addr2str ${addr})
+	log_test $rc $expected "$msg - ${astr}"
+}
+
+log_section()
+{
+	echo
+	echo "###########################################################################"
+	echo "$*"
+	echo "###########################################################################"
+	echo
+}
+
+log_subsection()
+{
+	echo
+	echo "#################################################################"
+	echo "$*"
+	echo
+}
+
+log_start()
+{
+	# make sure we have no test instances running
+	kill_procs
+
+	if [ "${VERBOSE}" = "1" ]; then
+		echo
+		echo "#######################################################"
+	fi
+}
+
+log_debug()
+{
+	if [ "${VERBOSE}" = "1" ]; then
+		echo
+		echo "$*"
+		echo
+	fi
+}
+
+show_hint()
+{
+	if [ "${VERBOSE}" = "1" ]; then
+		echo "HINT: $*"
+		echo
+	fi
+}
+
+kill_procs()
+{
+	killall nettest ping ping6 >/dev/null 2>&1
+	sleep 1
+}
+
+do_run_cmd()
+{
+	local cmd="$*"
+	local out
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo "COMMAND: ${cmd}"
+	fi
+
+	out=$($cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "$out"
+	fi
+
+	return $rc
+}
+
+run_cmd()
+{
+	do_run_cmd ${NSA_CMD} $*
+}
+
+run_cmd_nsb()
+{
+	do_run_cmd ${NSB_CMD} $*
+}
+
+run_cmd_nsc()
+{
+	do_run_cmd ${NSC_CMD} $*
+}
+
+setup_cmd()
+{
+	local cmd="$*"
+	local rc
+
+	run_cmd ${cmd}
+	rc=$?
+	if [ $rc -ne 0 ]; then
+		# show user the command if not done so already
+		if [ "$VERBOSE" = "0" ]; then
+			echo "setup command: $cmd"
+		fi
+		echo "failed. stopping tests"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue"
+			read a
+		fi
+		exit $rc
+	fi
+}
+
+setup_cmd_nsb()
+{
+	local cmd="$*"
+	local rc
+
+	run_cmd_nsb ${cmd}
+	rc=$?
+	if [ $rc -ne 0 ]; then
+		# show user the command if not done so already
+		if [ "$VERBOSE" = "0" ]; then
+			echo "setup command: $cmd"
+		fi
+		echo "failed. stopping tests"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue"
+			read a
+		fi
+		exit $rc
+	fi
+}
+
+setup_cmd_nsc()
+{
+	local cmd="$*"
+	local rc
+
+	run_cmd_nsc ${cmd}
+	rc=$?
+	if [ $rc -ne 0 ]; then
+		# show user the command if not done so already
+		if [ "$VERBOSE" = "0" ]; then
+			echo "setup command: $cmd"
+		fi
+		echo "failed. stopping tests"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue"
+			read a
+		fi
+		exit $rc
+	fi
+}
+
+# set sysctl values in NS-A
+set_sysctl()
+{
+	echo "SYSCTL: $*"
+	echo
+	run_cmd sysctl -q -w $*
+}
+
+################################################################################
+# Setup for tests
+
+addr2str()
+{
+	case "$1" in
+	127.0.0.1) echo "loopback";;
+	::1) echo "IPv6 loopback";;
+
+	${NSA_IP})	echo "ns-A IP";;
+	${NSA_IP6})	echo "ns-A IPv6";;
+	${NSA_LO_IP})	echo "ns-A loopback IP";;
+	${NSA_LO_IP6})	echo "ns-A loopback IPv6";;
+	${NSA_LINKIP6}|${NSA_LINKIP6}%*) echo "ns-A IPv6 LLA";;
+
+	${NSB_IP})	echo "ns-B IP";;
+	${NSB_IP6})	echo "ns-B IPv6";;
+	${NSB_LO_IP})	echo "ns-B loopback IP";;
+	${NSB_LO_IP6})	echo "ns-B loopback IPv6";;
+	${NSB_LINKIP6}|${NSB_LINKIP6}%*) echo "ns-B IPv6 LLA";;
+
+	${VRF_IP})	echo "VRF IP";;
+	${VRF_IP6})	echo "VRF IPv6";;
+
+	${MCAST}%*)	echo "multicast IP";;
+
+	*) echo "unknown";;
+	esac
+}
+
+get_linklocal()
+{
+	local ns=$1
+	local dev=$2
+	local addr
+
+	addr=$(ip -netns ${ns} -6 -br addr show dev ${dev} | \
+	awk '{
+		for (i = 3; i <= NF; ++i) {
+			if ($i ~ /^fe80/)
+				print $i
+		}
+	}'
+	)
+	addr=${addr/\/*}
+
+	[ -z "$addr" ] && return 1
+
+	echo $addr
+
+	return 0
+}
+
+################################################################################
+# create namespaces and vrf
+
+create_vrf()
+{
+	local ns=$1
+	local vrf=$2
+	local table=$3
+	local addr=$4
+	local addr6=$5
+
+	ip -netns ${ns} link add ${vrf} type vrf table ${table}
+	ip -netns ${ns} link set ${vrf} up
+	ip -netns ${ns} route add vrf ${vrf} unreachable default metric 8192
+	ip -netns ${ns} -6 route add vrf ${vrf} unreachable default metric 8192
+
+	ip -netns ${ns} addr add 127.0.0.1/8 dev ${vrf}
+	ip -netns ${ns} -6 addr add ::1 dev ${vrf} nodad
+	if [ "${addr}" != "-" ]; then
+		ip -netns ${ns} addr add dev ${vrf} ${addr}
+	fi
+	if [ "${addr6}" != "-" ]; then
+		ip -netns ${ns} -6 addr add dev ${vrf} ${addr6}
+	fi
+
+	ip -netns ${ns} ru del pref 0
+	ip -netns ${ns} ru add pref 32765 from all lookup local
+	ip -netns ${ns} -6 ru del pref 0
+	ip -netns ${ns} -6 ru add pref 32765 from all lookup local
+}
+
+create_ns()
+{
+	local ns=$1
+	local addr=$2
+	local addr6=$3
+
+	ip netns add ${ns}
+
+	ip -netns ${ns} link set lo up
+	if [ "${addr}" != "-" ]; then
+		ip -netns ${ns} addr add dev lo ${addr}
+	fi
+	if [ "${addr6}" != "-" ]; then
+		ip -netns ${ns} -6 addr add dev lo ${addr6}
+	fi
+
+	ip -netns ${ns} ro add unreachable default metric 8192
+	ip -netns ${ns} -6 ro add unreachable default metric 8192
+
+	ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
+}
+
+# create veth pair to connect namespaces and apply addresses.
+connect_ns()
+{
+	local ns1=$1
+	local ns1_dev=$2
+	local ns1_addr=$3
+	local ns1_addr6=$4
+	local ns2=$5
+	local ns2_dev=$6
+	local ns2_addr=$7
+	local ns2_addr6=$8
+
+	ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp
+	ip -netns ${ns1} li set ${ns1_dev} up
+	ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev}
+	ip -netns ${ns2} li set ${ns2_dev} up
+
+	if [ "${ns1_addr}" != "-" ]; then
+		ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr}
+		ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr}
+	fi
+
+	if [ "${ns1_addr6}" != "-" ]; then
+		ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6}
+		ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6}
+	fi
+}
+
+cleanup()
+{
+	# explicit cleanups to check those code paths
+	ip netns | grep -q ${NSA}
+	if [ $? -eq 0 ]; then
+		ip -netns ${NSA} link delete ${VRF}
+		ip -netns ${NSA} ro flush table ${VRF_TABLE}
+
+		ip -netns ${NSA} addr flush dev ${NSA_DEV}
+		ip -netns ${NSA} -6 addr flush dev ${NSA_DEV}
+		ip -netns ${NSA} link set dev ${NSA_DEV} down
+		ip -netns ${NSA} link del dev ${NSA_DEV}
+
+		ip netns pids ${NSA} | xargs kill 2>/dev/null
+		ip netns del ${NSA}
+	fi
+
+	ip netns pids ${NSB} | xargs kill 2>/dev/null
+	ip netns del ${NSB}
+	ip netns pids ${NSC} | xargs kill 2>/dev/null
+	ip netns del ${NSC} >/dev/null 2>&1
+}
+
+cleanup_vrf_dup()
+{
+	ip link del ${NSA_DEV2} >/dev/null 2>&1
+	ip netns pids ${NSC} | xargs kill 2>/dev/null
+	ip netns del ${NSC} >/dev/null 2>&1
+}
+
+setup_vrf_dup()
+{
+	# some VRF tests use ns-C which has the same config as
+	# ns-B but for a device NOT in the VRF
+	create_ns ${NSC} "-" "-"
+	connect_ns ${NSA} ${NSA_DEV2} ${NSA_IP}/24 ${NSA_IP6}/64 \
+		   ${NSC} ${NSC_DEV} ${NSB_IP}/24 ${NSB_IP6}/64
+}
+
+setup()
+{
+	local with_vrf=${1}
+
+	# make sure we are starting with a clean slate
+	kill_procs
+	cleanup 2>/dev/null
+
+	log_debug "Configuring network namespaces"
+	set -e
+
+	create_ns ${NSA} ${NSA_LO_IP}/32 ${NSA_LO_IP6}/128
+	create_ns ${NSB} ${NSB_LO_IP}/32 ${NSB_LO_IP6}/128
+	connect_ns ${NSA} ${NSA_DEV} ${NSA_IP}/24 ${NSA_IP6}/64 \
+		   ${NSB} ${NSB_DEV} ${NSB_IP}/24 ${NSB_IP6}/64
+
+	NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV})
+	NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV})
+
+	# tell ns-A how to get to remote addresses of ns-B
+	if [ "${with_vrf}" = "yes" ]; then
+		create_vrf ${NSA} ${VRF} ${VRF_TABLE} ${VRF_IP} ${VRF_IP6}
+
+		ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF}
+		ip -netns ${NSA} ro add vrf ${VRF} ${NSB_LO_IP}/32 via ${NSB_IP} dev ${NSA_DEV}
+		ip -netns ${NSA} -6 ro add vrf ${VRF} ${NSB_LO_IP6}/128 via ${NSB_IP6} dev ${NSA_DEV}
+
+		ip -netns ${NSB} ro add ${VRF_IP}/32 via ${NSA_IP} dev ${NSB_DEV}
+		ip -netns ${NSB} -6 ro add ${VRF_IP6}/128 via ${NSA_IP6} dev ${NSB_DEV}
+	else
+		ip -netns ${NSA} ro add ${NSB_LO_IP}/32 via ${NSB_IP} dev ${NSA_DEV}
+		ip -netns ${NSA} ro add ${NSB_LO_IP6}/128 via ${NSB_IP6} dev ${NSA_DEV}
+	fi
+
+
+	# tell ns-B how to get to remote addresses of ns-A
+	ip -netns ${NSB} ro add ${NSA_LO_IP}/32 via ${NSA_IP} dev ${NSB_DEV}
+	ip -netns ${NSB} ro add ${NSA_LO_IP6}/128 via ${NSA_IP6} dev ${NSB_DEV}
+
+	set +e
+
+	sleep 1
+}
+
+setup_lla_only()
+{
+	# make sure we are starting with a clean slate
+	kill_procs
+	cleanup 2>/dev/null
+
+	log_debug "Configuring network namespaces"
+	set -e
+
+	create_ns ${NSA} "-" "-"
+	create_ns ${NSB} "-" "-"
+	create_ns ${NSC} "-" "-"
+	connect_ns ${NSA} ${NSA_DEV} "-" "-" \
+		   ${NSB} ${NSB_DEV} "-" "-"
+	connect_ns ${NSA} ${NSA_DEV2} "-" "-" \
+		   ${NSC} ${NSC_DEV}  "-" "-"
+
+	NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV})
+	NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV})
+	NSC_LINKIP6=$(get_linklocal ${NSC} ${NSC_DEV})
+
+	create_vrf ${NSA} ${VRF} ${VRF_TABLE} "-" "-"
+	ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF}
+	ip -netns ${NSA} link set dev ${NSA_DEV2} vrf ${VRF}
+
+	set +e
+
+	sleep 1
+}
+
+################################################################################
+# IPv4
+
+ipv4_ping_novrf()
+{
+	local a
+
+	#
+	# out
+	#
+	for a in ${NSB_IP} ${NSB_LO_IP}
+	do
+		log_start
+		run_cmd ping -c1 -w1 ${a}
+		log_test_addr ${a} $? 0 "ping out"
+
+		log_start
+		run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 0 "ping out, device bind"
+
+		log_start
+		run_cmd ping -c1 -w1 -I ${NSA_LO_IP} ${a}
+		log_test_addr ${a} $? 0 "ping out, address bind"
+	done
+
+	#
+	# in
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP}
+	do
+		log_start
+		run_cmd_nsb ping -c1 -w1 ${a}
+		log_test_addr ${a} $? 0 "ping in"
+	done
+
+	#
+	# local traffic
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd ping -c1 -w1 ${a}
+		log_test_addr ${a} $? 0 "ping local"
+	done
+
+	#
+	# local traffic, socket bound to device
+	#
+	# address on device
+	a=${NSA_IP}
+	log_start
+	run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 0 "ping local, device bind"
+
+	# loopback addresses not reachable from device bind
+	# fails in a really weird way though because ipv4 special cases
+	# route lookups with oif set.
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Fails since address on loopback device is out of device scope"
+		run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 1 "ping local, device bind"
+	done
+
+	#
+	# ip rule blocks reachability to remote address
+	#
+	log_start
+	setup_cmd ip rule add pref 32765 from all lookup local
+	setup_cmd ip rule del pref 0 from all lookup local
+	setup_cmd ip rule add pref 50 to ${NSB_LO_IP} prohibit
+	setup_cmd ip rule add pref 51 from ${NSB_IP} prohibit
+
+	a=${NSB_LO_IP}
+	run_cmd ping -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping out, blocked by rule"
+
+	# NOTE: ipv4 actually allows the lookup to fail and yet still create
+	# a viable rtable if the oif (e.g., bind to device) is set, so this
+	# case succeeds despite the rule
+	# run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+
+	a=${NSA_LO_IP}
+	log_start
+	show_hint "Response generates ICMP (or arp request is ignored) due to ip rule"
+	run_cmd_nsb ping -c1 -w1 ${a}
+	log_test_addr ${a} $? 1 "ping in, blocked by rule"
+
+	[ "$VERBOSE" = "1" ] && echo
+	setup_cmd ip rule del pref 32765 from all lookup local
+	setup_cmd ip rule add pref 0 from all lookup local
+	setup_cmd ip rule del pref 50 to ${NSB_LO_IP} prohibit
+	setup_cmd ip rule del pref 51 from ${NSB_IP} prohibit
+
+	#
+	# route blocks reachability to remote address
+	#
+	log_start
+	setup_cmd ip route replace unreachable ${NSB_LO_IP}
+	setup_cmd ip route replace unreachable ${NSB_IP}
+
+	a=${NSB_LO_IP}
+	run_cmd ping -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping out, blocked by route"
+
+	# NOTE: ipv4 actually allows the lookup to fail and yet still create
+	# a viable rtable if the oif (e.g., bind to device) is set, so this
+	# case succeeds despite not having a route for the address
+	# run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+
+	a=${NSA_LO_IP}
+	log_start
+	show_hint "Response is dropped (or arp request is ignored) due to ip route"
+	run_cmd_nsb ping -c1 -w1 ${a}
+	log_test_addr ${a} $? 1 "ping in, blocked by route"
+
+	#
+	# remove 'remote' routes; fallback to default
+	#
+	log_start
+	setup_cmd ip ro del ${NSB_LO_IP}
+
+	a=${NSB_LO_IP}
+	run_cmd ping -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping out, unreachable default route"
+
+	# NOTE: ipv4 actually allows the lookup to fail and yet still create
+	# a viable rtable if the oif (e.g., bind to device) is set, so this
+	# case succeeds despite not having a route for the address
+	# run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+}
+
+ipv4_ping_vrf()
+{
+	local a
+
+	# should default on; does not exist on older kernels
+	set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null
+
+	#
+	# out
+	#
+	for a in ${NSB_IP} ${NSB_LO_IP}
+	do
+		log_start
+		run_cmd ping -c1 -w1 -I ${VRF} ${a}
+		log_test_addr ${a} $? 0 "ping out, VRF bind"
+
+		log_start
+		run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 0 "ping out, device bind"
+
+		log_start
+		run_cmd ip vrf exec ${VRF} ping -c1 -w1 -I ${NSA_IP} ${a}
+		log_test_addr ${a} $? 0 "ping out, vrf device + dev address bind"
+
+		log_start
+		run_cmd ip vrf exec ${VRF} ping -c1 -w1 -I ${VRF_IP} ${a}
+		log_test_addr ${a} $? 0 "ping out, vrf device + vrf address bind"
+	done
+
+	#
+	# in
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd_nsb ping -c1 -w1 ${a}
+		log_test_addr ${a} $? 0 "ping in"
+	done
+
+	#
+	# local traffic, local address
+	#
+	for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Source address should be ${a}"
+		run_cmd ping -c1 -w1 -I ${VRF} ${a}
+		log_test_addr ${a} $? 0 "ping local, VRF bind"
+	done
+
+	#
+	# local traffic, socket bound to device
+	#
+	# address on device
+	a=${NSA_IP}
+	log_start
+	run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 0 "ping local, device bind"
+
+	# vrf device is out of scope
+	for a in ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Fails since address on vrf device is out of device scope"
+		run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 1 "ping local, device bind"
+	done
+
+	#
+	# ip rule blocks address
+	#
+	log_start
+	setup_cmd ip rule add pref 50 to ${NSB_LO_IP} prohibit
+	setup_cmd ip rule add pref 51 from ${NSB_IP} prohibit
+
+	a=${NSB_LO_IP}
+	run_cmd ping -c1 -w1 -I ${VRF} ${a}
+	log_test_addr ${a} $? 2 "ping out, vrf bind, blocked by rule"
+
+	log_start
+	run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule"
+
+	a=${NSA_LO_IP}
+	log_start
+	show_hint "Response lost due to ip rule"
+	run_cmd_nsb ping -c1 -w1 ${a}
+	log_test_addr ${a} $? 1 "ping in, blocked by rule"
+
+	[ "$VERBOSE" = "1" ] && echo
+	setup_cmd ip rule del pref 50 to ${NSB_LO_IP} prohibit
+	setup_cmd ip rule del pref 51 from ${NSB_IP} prohibit
+
+	#
+	# remove 'remote' routes; fallback to default
+	#
+	log_start
+	setup_cmd ip ro del vrf ${VRF} ${NSB_LO_IP}
+
+	a=${NSB_LO_IP}
+	run_cmd ping -c1 -w1 -I ${VRF} ${a}
+	log_test_addr ${a} $? 2 "ping out, vrf bind, unreachable route"
+
+	log_start
+	run_cmd ping -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 2 "ping out, device bind, unreachable route"
+
+	a=${NSA_LO_IP}
+	log_start
+	show_hint "Response lost by unreachable route"
+	run_cmd_nsb ping -c1 -w1 ${a}
+	log_test_addr ${a} $? 1 "ping in, unreachable route"
+}
+
+ipv4_ping()
+{
+	log_section "IPv4 ping"
+
+	log_subsection "No VRF"
+	setup
+	set_sysctl net.ipv4.raw_l3mdev_accept=0 2>/dev/null
+	ipv4_ping_novrf
+	setup
+	set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null
+	ipv4_ping_novrf
+	setup
+	set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
+	ipv4_ping_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv4_ping_vrf
+	setup "yes"
+	set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
+	ipv4_ping_vrf
+}
+
+################################################################################
+# IPv4 TCP
+
+#
+# MD5 tests without VRF
+#
+ipv4_tcp_md5_novrf()
+{
+	#
+	# single address
+	#
+
+	# basic use case
+	log_start
+	run_cmd nettest -s -M ${MD5_PW} -r ${NSB_IP} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 0 "MD5: Single address config"
+
+	# client sends MD5, server not configured
+	log_start
+	show_hint "Should timeout due to MD5 mismatch"
+	run_cmd nettest -s &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 2 "MD5: Server no config, client uses password"
+
+	# wrong password
+	log_start
+	show_hint "Should timeout since client uses wrong password"
+	run_cmd nettest -s -M ${MD5_PW} -r ${NSB_IP} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: Client uses wrong password"
+
+	# client from different address
+	log_start
+	show_hint "Should timeout due to MD5 mismatch"
+	run_cmd nettest -s -M ${MD5_PW} -r ${NSB_LO_IP} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 2 "MD5: Client address does not match address configured with password"
+
+	#
+	# MD5 extension - prefix length
+	#
+
+	# client in prefix
+	log_start
+	run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsb nettest  -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 0 "MD5: Prefix config"
+
+	# client in prefix, wrong password
+	log_start
+	show_hint "Should timeout since client uses wrong password"
+	run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: Prefix config, client uses wrong password"
+
+	# client outside of prefix
+	log_start
+	show_hint "Should timeout due to MD5 mismatch"
+	run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
+}
+
+#
+# MD5 tests with VRF
+#
+ipv4_tcp_md5()
+{
+	#
+	# single address
+	#
+
+	# basic use case
+	log_start
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 0 "MD5: VRF: Single address config"
+
+	# client sends MD5, server not configured
+	log_start
+	show_hint "Should timeout since server does not have MD5 auth"
+	run_cmd nettest -s -d ${VRF} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Server no config, client uses password"
+
+	# wrong password
+	log_start
+	show_hint "Should timeout since client uses wrong password"
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: VRF: Client uses wrong password"
+
+	# client from different address
+	log_start
+	show_hint "Should timeout since server config differs from client"
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_LO_IP} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
+
+	#
+	# MD5 extension - prefix length
+	#
+
+	# client in prefix
+	log_start
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsb nettest  -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 0 "MD5: VRF: Prefix config"
+
+	# client in prefix, wrong password
+	log_start
+	show_hint "Should timeout since client uses wrong password"
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
+
+	# client outside of prefix
+	log_start
+	show_hint "Should timeout since client address is outside of prefix"
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsb nettest -l ${NSB_LO_IP} -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
+
+	#
+	# duplicate config between default VRF and a VRF
+	#
+
+	log_start
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+	sleep 1
+	run_cmd_nsb nettest  -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
+
+	log_start
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+	sleep 1
+	run_cmd_nsc nettest  -r ${NSA_IP} -M ${MD5_WRONG_PW}
+	log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
+
+	log_start
+	show_hint "Should timeout since client in default VRF uses VRF password"
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+	sleep 1
+	run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
+
+	log_start
+	show_hint "Should timeout since client in VRF uses default VRF password"
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -r ${NSB_IP} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
+
+	log_start
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsb nettest  -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
+
+	log_start
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsc nettest  -r ${NSA_IP} -M ${MD5_WRONG_PW}
+	log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
+
+	log_start
+	show_hint "Should timeout since client in default VRF uses VRF password"
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsc nettest -r ${NSA_IP} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
+
+	log_start
+	show_hint "Should timeout since client in VRF uses default VRF password"
+	run_cmd nettest -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET} &
+	run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
+	sleep 1
+	run_cmd_nsb nettest -r ${NSA_IP} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
+
+	#
+	# negative tests
+	#
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -r ${NSB_IP}
+	log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
+
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET}
+	log_test $? 1 "MD5: VRF: Device must be a VRF - prefix"
+
+}
+
+ipv4_tcp_novrf()
+{
+	local a
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP}
+	do
+		log_start
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -r ${a}
+	log_test_addr ${a} $? 0 "Device server"
+
+	# verify TCP reset sent and received
+	for a in ${NSA_IP} ${NSA_LO_IP}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	#
+	# client
+	#
+	for a in ${NSB_IP} ${NSB_LO_IP}
+	do
+		log_start
+		run_cmd_nsb nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client"
+
+		log_start
+		run_cmd_nsb nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 0 "Client, device bind"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -r ${a}
+		log_test_addr ${a} $? 1 "No server, unbound client"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -0 ${a} -1 ${a}
+		log_test_addr ${a} $? 0 "Global server, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -r ${a} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
+
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
+		run_cmd nettest -s -d ${NSA_DEV} &
+		sleep 1
+		run_cmd nettest -r ${a}
+		log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s &
+	sleep 1
+	run_cmd nettest -r ${a} -0 ${a} -d ${NSA_DEV}
+	log_test_addr ${a} $? 0 "Global server, device client, local connection"
+
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "Global server, device client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest  -d ${NSA_DEV} -r ${a} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, device client, local connection"
+
+	log_start
+	show_hint "Should fail 'Connection refused'"
+	run_cmd nettest -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 1 "No server, device client, local conn"
+
+	[ "$fips_enabled" = "1" ] || ipv4_tcp_md5_novrf
+}
+
+ipv4_tcp_vrf()
+{
+	local a
+
+	# disable global server
+	log_subsection "Global server disabled"
+
+	set_sysctl net.ipv4.tcp_l3mdev_accept=0
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "Global server"
+
+		log_start
+		run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+
+		log_start
+		run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "Device server"
+
+		# verify TCP reset received
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	# local address tests
+	# (${VRF_IP} and 127.0.0.1 both timeout)
+	a=${NSA_IP}
+	log_start
+	show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+	run_cmd nettest -s &
+	sleep 1
+	run_cmd nettest -r ${a} -d ${NSA_DEV}
+	log_test_addr ${a} $? 1 "Global server, local connection"
+
+	# run MD5 tests
+	if [ "$fips_enabled" = "0" ]; then
+		setup_vrf_dup
+		ipv4_tcp_md5
+		cleanup_vrf_dup
+	fi
+
+	#
+	# enable VRF global server
+	#
+	log_subsection "VRF Global server enabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=1
+
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "client socket should be bound to VRF"
+		run_cmd nettest -s -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+
+		log_start
+		show_hint "client socket should be bound to VRF"
+		run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+
+		# verify TCP reset received
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	a=${NSA_IP}
+	log_start
+	show_hint "client socket should be bound to device"
+	run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -r ${a}
+	log_test_addr ${a} $? 0 "Device server"
+
+	# local address tests
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since client is not bound to VRF"
+		run_cmd nettest -s -d ${VRF} &
+		sleep 1
+		run_cmd nettest -r ${a}
+		log_test_addr ${a} $? 1 "Global server, local connection"
+	done
+
+	#
+	# client
+	#
+	for a in ${NSB_IP} ${NSB_LO_IP}
+	do
+		log_start
+		run_cmd_nsb nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${VRF}
+		log_test_addr ${a} $? 0 "Client, VRF bind"
+
+		log_start
+		run_cmd_nsb nettest -s &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 0 "Client, device bind"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -r ${a} -d ${VRF}
+		log_test_addr ${a} $? 1 "No server, VRF client"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
+		log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -d ${VRF} -2 ${VRF} &
+	sleep 1
+	run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
+	log_test_addr ${a} $? 0 "VRF server, device client, local connection"
+
+	log_start
+	show_hint "Should fail 'No route to host' since client is out of VRF scope"
+	run_cmd nettest -s -d ${VRF} &
+	sleep 1
+	run_cmd nettest -r ${a}
+	log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
+
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
+
+	log_start
+	run_cmd nettest -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, device client, local connection"
+}
+
+ipv4_tcp()
+{
+	log_section "IPv4/TCP"
+	log_subsection "No VRF"
+	setup
+
+	# tcp_l3mdev_accept should have no affect without VRF;
+	# run tests with it enabled and disabled to verify
+	log_subsection "tcp_l3mdev_accept disabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=0
+	ipv4_tcp_novrf
+	log_subsection "tcp_l3mdev_accept enabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=1
+	ipv4_tcp_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv4_tcp_vrf
+}
+
+################################################################################
+# IPv4 UDP
+
+ipv4_udp_novrf()
+{
+	local a
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP}
+	do
+		log_start
+		run_cmd nettest -D -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -D -r ${a}
+	log_test_addr ${a} $? 0 "Device server"
+
+	#
+	# client
+	#
+	for a in ${NSB_IP} ${NSB_LO_IP}
+	do
+		log_start
+		run_cmd_nsb nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client"
+
+		log_start
+		run_cmd_nsb nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client, device bind"
+
+		log_start
+		run_cmd_nsb nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client, device send via cmsg"
+
+		log_start
+		run_cmd_nsb nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP}
+		log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "No server, unbound client"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -0 ${a} -1 ${a}
+		log_test_addr ${a} $? 0 "Global server, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -r ${a}
+	log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
+
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since address is out of device scope"
+		run_cmd nettest -s -D -d ${NSA_DEV} &
+		sleep 1
+		run_cmd nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -D &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device client, local connection"
+
+	log_start
+	run_cmd nettest -s -D &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -C -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
+
+	log_start
+	run_cmd nettest -s -D &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -S -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection"
+
+	# IPv4 with device bind has really weird behavior - it overrides the
+	# fib lookup, generates an rtable and tries to send the packet. This
+	# causes failures for local traffic at different places
+	for a in ${NSA_LO_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail since addresses on loopback are out of device scope"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 2 "Global server, device client, local connection"
+
+		log_start
+		show_hint "Should fail since addresses on loopback are out of device scope"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C
+		log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
+
+		log_start
+		show_hint "Should fail since addresses on loopback are out of device scope"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S
+		log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -D -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, device client, local conn"
+
+	log_start
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 2 "No server, device client, local conn"
+}
+
+ipv4_udp_vrf()
+{
+	local a
+
+	# disable global server
+	log_subsection "Global server disabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=0
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "Fails because ingress is in a VRF and global server is disabled"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "Global server"
+
+		log_start
+		run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+
+		log_start
+		run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "Enslaved device server"
+
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+
+		log_start
+		show_hint "Should fail 'Connection refused' since global server is out of scope"
+		run_cmd nettest -D -s &
+		sleep 1
+		run_cmd nettest -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 1 "Global server, VRF client, local connection"
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection"
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
+
+	# enable global server
+	log_subsection "Global server enabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=1
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest -D -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+
+		log_start
+		run_cmd nettest -D -d ${VRF} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+
+		log_start
+		run_cmd nettest -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 0 "Enslaved device server"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd_nsb nettest -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	#
+	# client tests
+	#
+	log_start
+	run_cmd_nsb nettest -D -s &
+	sleep 1
+	run_cmd nettest -d ${VRF} -D -r ${NSB_IP} -1 ${NSA_IP}
+	log_test $? 0 "VRF client"
+
+	log_start
+	run_cmd_nsb nettest -D -s &
+	sleep 1
+	run_cmd nettest -d ${NSA_DEV} -D -r ${NSB_IP} -1 ${NSA_IP}
+	log_test $? 0 "Enslaved device client"
+
+	# negative test - should fail
+	log_start
+	show_hint "Should fail 'Connection refused'"
+	run_cmd nettest -D -d ${VRF} -r ${NSB_IP}
+	log_test $? 1 "No server, VRF client"
+
+	log_start
+	show_hint "Should fail 'Connection refused'"
+	run_cmd nettest -D -d ${NSA_DEV} -r ${NSB_IP}
+	log_test $? 1 "No server, enslaved device client"
+
+	#
+	# local address tests
+	#
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -D -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, device client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
+
+	for a in ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -D -s -2 ${VRF} &
+		sleep 1
+		run_cmd nettest -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
+	done
+
+	for a in ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		run_cmd nettest -s -D -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd nettest -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+	done
+
+	# negative test - should fail
+	# verifies ECONNREFUSED
+	for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 1 "No server, VRF client, local conn"
+	done
+}
+
+ipv4_udp()
+{
+	log_section "IPv4/UDP"
+	log_subsection "No VRF"
+
+	setup
+
+	# udp_l3mdev_accept should have no affect without VRF;
+	# run tests with it enabled and disabled to verify
+	log_subsection "udp_l3mdev_accept disabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=0
+	ipv4_udp_novrf
+	log_subsection "udp_l3mdev_accept enabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=1
+	ipv4_udp_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv4_udp_vrf
+}
+
+################################################################################
+# IPv4 address bind
+#
+# verifies ability or inability to bind to an address / device
+
+ipv4_addr_bind_novrf()
+{
+	#
+	# raw socket
+	#
+	for a in ${NSA_IP} ${NSA_LO_IP}
+	do
+		log_start
+		run_cmd nettest -s -R -P icmp -l ${a} -b
+		log_test_addr ${a} $? 0 "Raw socket bind to local address"
+
+		log_start
+		run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b
+		log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
+	done
+
+	#
+	# tcp sockets
+	#
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest -l ${a} -r ${NSB_IP} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to local address"
+
+	log_start
+	run_cmd nettest -l ${a} -r ${NSB_IP} -d ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
+
+	# Sadly, the kernel allows binding a socket to a device and then
+	# binding to an address not on the device. The only restriction
+	# is that the address is valid in the L3 domain. So this test
+	# passes when it really should not
+	#a=${NSA_LO_IP}
+	#log_start
+	#show_hint "Should fail with 'Cannot assign requested address'"
+	#run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+	#log_test_addr ${a} $? 1 "TCP socket bind to out of scope local address"
+}
+
+ipv4_addr_bind_vrf()
+{
+	#
+	# raw socket
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		show_hint "Socket not bound to VRF, but address is in VRF"
+		run_cmd nettest -s -R -P icmp -l ${a} -b
+		log_test_addr ${a} $? 1 "Raw socket bind to local address"
+
+		log_start
+		run_cmd nettest -s -R -P icmp -l ${a} -d ${NSA_DEV} -b
+		log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
+		log_start
+		run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b
+		log_test_addr ${a} $? 0 "Raw socket bind to local address after VRF bind"
+	done
+
+	a=${NSA_LO_IP}
+	log_start
+	show_hint "Address on loopback is out of VRF scope"
+	run_cmd nettest -s -R -P icmp -l ${a} -d ${VRF} -b
+	log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind"
+
+	#
+	# tcp sockets
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b
+		log_test_addr ${a} $? 0 "TCP socket bind to local address"
+
+		log_start
+		run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+		log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
+	done
+
+	a=${NSA_LO_IP}
+	log_start
+	show_hint "Address on loopback out of scope for VRF"
+	run_cmd nettest -s -l ${a} -d ${VRF} -t1 -b
+	log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
+
+	log_start
+	show_hint "Address on loopback out of scope for device in VRF"
+	run_cmd nettest -s -l ${a} -d ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
+}
+
+ipv4_addr_bind()
+{
+	log_section "IPv4 address binds"
+
+	log_subsection "No VRF"
+	setup
+	ipv4_addr_bind_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv4_addr_bind_vrf
+}
+
+################################################################################
+# IPv4 runtime tests
+
+ipv4_rt()
+{
+	local desc="$1"
+	local varg="$2"
+	local with_vrf="yes"
+	local a
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest ${varg} -s &
+		sleep 1
+		run_cmd_nsb nettest ${varg} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, global server"
+
+		setup ${with_vrf}
+	done
+
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest ${varg} -s -d ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest ${varg} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, VRF server"
+
+		setup ${with_vrf}
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest ${varg} -s -d ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest ${varg} -r ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, enslaved device server"
+
+	setup ${with_vrf}
+
+	#
+	# client test
+	#
+	log_start
+	run_cmd_nsb nettest ${varg} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, VRF client"
+
+	setup ${with_vrf}
+
+	log_start
+	run_cmd_nsb nettest ${varg} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, enslaved device client"
+
+	setup ${with_vrf}
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest ${varg} -s &
+		sleep 1
+		run_cmd nettest ${varg} -d ${VRF} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, global server, VRF client, local"
+
+		setup ${with_vrf}
+	done
+
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest ${varg} -d ${VRF} -s &
+		sleep 1
+		run_cmd nettest ${varg} -d ${VRF} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, VRF server and client, local"
+
+		setup ${with_vrf}
+	done
+
+	a=${NSA_IP}
+	log_start
+	run_cmd nettest ${varg} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, global server, enslaved device client, local"
+
+	setup ${with_vrf}
+
+	log_start
+	run_cmd nettest ${varg} -d ${VRF} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, VRF server, enslaved device client, local"
+
+	setup ${with_vrf}
+
+	log_start
+	run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, enslaved device server and client, local"
+}
+
+ipv4_ping_rt()
+{
+	local with_vrf="yes"
+	local a
+
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd_nsb ping -f ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "Device delete with active traffic - ping in"
+
+		setup ${with_vrf}
+	done
+
+	a=${NSB_IP}
+	log_start
+	run_cmd ping -f -I ${VRF} ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "Device delete with active traffic - ping out"
+}
+
+ipv4_runtime()
+{
+	log_section "Run time tests - ipv4"
+
+	setup "yes"
+	ipv4_ping_rt
+
+	setup "yes"
+	ipv4_rt "TCP active socket"  "-n -1"
+
+	setup "yes"
+	ipv4_rt "TCP passive socket" "-i"
+}
+
+################################################################################
+# IPv6
+
+ipv6_ping_novrf()
+{
+	local a
+
+	# should not have an impact, but make a known state
+	set_sysctl net.ipv4.raw_l3mdev_accept=0 2>/dev/null
+
+	#
+	# out
+	#
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
+	do
+		log_start
+		run_cmd ${ping6} -c1 -w1 ${a}
+		log_test_addr ${a} $? 0 "ping out"
+	done
+
+	for a in ${NSB_IP6} ${NSB_LO_IP6}
+	do
+		log_start
+		run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 0 "ping out, device bind"
+
+		log_start
+		run_cmd ${ping6} -c1 -w1 -I ${NSA_LO_IP6} ${a}
+		log_test_addr ${a} $? 0 "ping out, loopback address bind"
+	done
+
+	#
+	# in
+	#
+	for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV} ${MCAST}%${NSB_DEV}
+	do
+		log_start
+		run_cmd_nsb ${ping6} -c1 -w1 ${a}
+		log_test_addr ${a} $? 0 "ping in"
+	done
+
+	#
+	# local traffic, local address
+	#
+	for a in ${NSA_IP6} ${NSA_LO_IP6} ::1 ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
+	do
+		log_start
+		run_cmd ${ping6} -c1 -w1 ${a}
+		log_test_addr ${a} $? 0 "ping local, no bind"
+	done
+
+	for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
+	do
+		log_start
+		run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 0 "ping local, device bind"
+	done
+
+	for a in ${NSA_LO_IP6} ::1
+	do
+		log_start
+		show_hint "Fails since address on loopback is out of device scope"
+		run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 2 "ping local, device bind"
+	done
+
+	#
+	# ip rule blocks address
+	#
+	log_start
+	setup_cmd ip -6 rule add pref 32765 from all lookup local
+	setup_cmd ip -6 rule del pref 0 from all lookup local
+	setup_cmd ip -6 rule add pref 50 to ${NSB_LO_IP6} prohibit
+	setup_cmd ip -6 rule add pref 51 from ${NSB_IP6} prohibit
+
+	a=${NSB_LO_IP6}
+	run_cmd ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping out, blocked by rule"
+
+	log_start
+	run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule"
+
+	a=${NSA_LO_IP6}
+	log_start
+	show_hint "Response lost due to ip rule"
+	run_cmd_nsb ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 1 "ping in, blocked by rule"
+
+	setup_cmd ip -6 rule add pref 0 from all lookup local
+	setup_cmd ip -6 rule del pref 32765 from all lookup local
+	setup_cmd ip -6 rule del pref 50 to ${NSB_LO_IP6} prohibit
+	setup_cmd ip -6 rule del pref 51 from ${NSB_IP6} prohibit
+
+	#
+	# route blocks reachability to remote address
+	#
+	log_start
+	setup_cmd ip -6 route del ${NSB_LO_IP6}
+	setup_cmd ip -6 route add unreachable ${NSB_LO_IP6} metric 10
+	setup_cmd ip -6 route add unreachable ${NSB_IP6} metric 10
+
+	a=${NSB_LO_IP6}
+	run_cmd ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping out, blocked by route"
+
+	log_start
+	run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 2 "ping out, device bind, blocked by route"
+
+	a=${NSA_LO_IP6}
+	log_start
+	show_hint "Response lost due to ip route"
+	run_cmd_nsb ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 1 "ping in, blocked by route"
+
+
+	#
+	# remove 'remote' routes; fallback to default
+	#
+	log_start
+	setup_cmd ip -6 ro del unreachable ${NSB_LO_IP6}
+	setup_cmd ip -6 ro del unreachable ${NSB_IP6}
+
+	a=${NSB_LO_IP6}
+	run_cmd ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping out, unreachable route"
+
+	log_start
+	run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 2 "ping out, device bind, unreachable route"
+}
+
+ipv6_ping_vrf()
+{
+	local a
+
+	# should default on; does not exist on older kernels
+	set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null
+
+	#
+	# out
+	#
+	for a in ${NSB_IP6} ${NSB_LO_IP6}
+	do
+		log_start
+		run_cmd ${ping6} -c1 -w1 -I ${VRF} ${a}
+		log_test_addr ${a} $? 0 "ping out, VRF bind"
+	done
+
+	for a in ${NSB_LINKIP6}%${VRF} ${MCAST}%${VRF}
+	do
+		log_start
+		show_hint "Fails since VRF device does not support linklocal or multicast"
+		run_cmd ${ping6} -c1 -w1 ${a}
+		log_test_addr ${a} $? 1 "ping out, VRF bind"
+	done
+
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
+	do
+		log_start
+		run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 0 "ping out, device bind"
+	done
+
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
+	do
+		log_start
+		run_cmd ip vrf exec ${VRF} ${ping6} -c1 -w1 -I ${VRF_IP6} ${a}
+		log_test_addr ${a} $? 0 "ping out, vrf device+address bind"
+	done
+
+	#
+	# in
+	#
+	for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV} ${MCAST}%${NSB_DEV}
+	do
+		log_start
+		run_cmd_nsb ${ping6} -c1 -w1 ${a}
+		log_test_addr ${a} $? 0 "ping in"
+	done
+
+	a=${NSA_LO_IP6}
+	log_start
+	show_hint "Fails since loopback address is out of VRF scope"
+	run_cmd_nsb ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 1 "ping in"
+
+	#
+	# local traffic, local address
+	#
+	for a in ${NSA_IP6} ${VRF_IP6} ::1
+	do
+		log_start
+		show_hint "Source address should be ${a}"
+		run_cmd ${ping6} -c1 -w1 -I ${VRF} ${a}
+		log_test_addr ${a} $? 0 "ping local, VRF bind"
+	done
+
+	for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSA_DEV} ${MCAST}%${NSA_DEV}
+	do
+		log_start
+		run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+		log_test_addr ${a} $? 0 "ping local, device bind"
+	done
+
+	# LLA to GUA - remove ipv6 global addresses from ns-B
+	setup_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV}
+	setup_cmd_nsb ip -6 addr del ${NSB_LO_IP6}/128 dev lo
+	setup_cmd_nsb ip -6 ro add ${NSA_IP6}/128 via ${NSA_LINKIP6} dev ${NSB_DEV}
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6}
+		log_test_addr ${a} $? 0 "ping in, LLA to GUA"
+	done
+
+	setup_cmd_nsb ip -6 ro del ${NSA_IP6}/128 via ${NSA_LINKIP6} dev ${NSB_DEV}
+	setup_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV}
+	setup_cmd_nsb ip -6 addr add ${NSB_LO_IP6}/128 dev lo
+
+	#
+	# ip rule blocks address
+	#
+	log_start
+	setup_cmd ip -6 rule add pref 50 to ${NSB_LO_IP6} prohibit
+	setup_cmd ip -6 rule add pref 51 from ${NSB_IP6} prohibit
+
+	a=${NSB_LO_IP6}
+	run_cmd ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping out, blocked by rule"
+
+	log_start
+	run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 2 "ping out, device bind, blocked by rule"
+
+	a=${NSA_LO_IP6}
+	log_start
+	show_hint "Response lost due to ip rule"
+	run_cmd_nsb ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 1 "ping in, blocked by rule"
+
+	log_start
+	setup_cmd ip -6 rule del pref 50 to ${NSB_LO_IP6} prohibit
+	setup_cmd ip -6 rule del pref 51 from ${NSB_IP6} prohibit
+
+	#
+	# remove 'remote' routes; fallback to default
+	#
+	log_start
+	setup_cmd ip -6 ro del ${NSB_LO_IP6} vrf ${VRF}
+
+	a=${NSB_LO_IP6}
+	run_cmd ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping out, unreachable route"
+
+	log_start
+	run_cmd ${ping6} -c1 -w1 -I ${NSA_DEV} ${a}
+	log_test_addr ${a} $? 2 "ping out, device bind, unreachable route"
+
+	ip -netns ${NSB} -6 ro del ${NSA_LO_IP6}
+	a=${NSA_LO_IP6}
+	log_start
+	run_cmd_nsb ${ping6} -c1 -w1 ${a}
+	log_test_addr ${a} $? 2 "ping in, unreachable route"
+}
+
+ipv6_ping()
+{
+	log_section "IPv6 ping"
+
+	log_subsection "No VRF"
+	setup
+	ipv6_ping_novrf
+	setup
+	set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
+	ipv6_ping_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv6_ping_vrf
+	setup "yes"
+	set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
+	ipv6_ping_vrf
+}
+
+################################################################################
+# IPv6 TCP
+
+#
+# MD5 tests without VRF
+#
+ipv6_tcp_md5_novrf()
+{
+	#
+	# single address
+	#
+
+	# basic use case
+	log_start
+	run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_IP6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 0 "MD5: Single address config"
+
+	# client sends MD5, server not configured
+	log_start
+	show_hint "Should timeout due to MD5 mismatch"
+	run_cmd nettest -6 -s &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 2 "MD5: Server no config, client uses password"
+
+	# wrong password
+	log_start
+	show_hint "Should timeout since client uses wrong password"
+	run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_IP6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: Client uses wrong password"
+
+	# client from different address
+	log_start
+	show_hint "Should timeout due to MD5 mismatch"
+	run_cmd nettest -6 -s -M ${MD5_PW} -r ${NSB_LO_IP6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 2 "MD5: Client address does not match address configured with password"
+
+	#
+	# MD5 extension - prefix length
+	#
+
+	# client in prefix
+	log_start
+	run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsb nettest -6  -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 0 "MD5: Prefix config"
+
+	# client in prefix, wrong password
+	log_start
+	show_hint "Should timeout since client uses wrong password"
+	run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: Prefix config, client uses wrong password"
+
+	# client outside of prefix
+	log_start
+	show_hint "Should timeout due to MD5 mismatch"
+	run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
+}
+
+#
+# MD5 tests with VRF
+#
+ipv6_tcp_md5()
+{
+	#
+	# single address
+	#
+
+	# basic use case
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 0 "MD5: VRF: Single address config"
+
+	# client sends MD5, server not configured
+	log_start
+	show_hint "Should timeout since server does not have MD5 auth"
+	run_cmd nettest -6 -s -d ${VRF} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Server no config, client uses password"
+
+	# wrong password
+	log_start
+	show_hint "Should timeout since client uses wrong password"
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: VRF: Client uses wrong password"
+
+	# client from different address
+	log_start
+	show_hint "Should timeout since server config differs from client"
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_LO_IP6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
+
+	#
+	# MD5 extension - prefix length
+	#
+
+	# client in prefix
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsb nettest -6  -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 0 "MD5: VRF: Prefix config"
+
+	# client in prefix, wrong password
+	log_start
+	show_hint "Should timeout since client uses wrong password"
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
+
+	# client outside of prefix
+	log_start
+	show_hint "Should timeout since client address is outside of prefix"
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -l ${NSB_LO_IP6} -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
+
+	#
+	# duplicate config between default VRF and a VRF
+	#
+
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+	sleep 1
+	run_cmd_nsb nettest -6  -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
+
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+	sleep 1
+	run_cmd_nsc nettest -6  -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+	log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
+
+	log_start
+	show_hint "Should timeout since client in default VRF uses VRF password"
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+	sleep 1
+	run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
+
+	log_start
+	show_hint "Should timeout since client in VRF uses default VRF password"
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -r ${NSB_IP6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -r ${NSB_IP6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
+
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsb nettest -6  -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
+
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsc nettest -6  -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+	log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
+
+	log_start
+	show_hint "Should timeout since client in default VRF uses VRF password"
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsc nettest -6 -r ${NSA_IP6} -M ${MD5_PW}
+	log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
+
+	log_start
+	show_hint "Should timeout since client in VRF uses default VRF password"
+	run_cmd nettest -6 -s -d ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
+	run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${NSA_IP6} -M ${MD5_WRONG_PW}
+	log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
+
+	#
+	# negative tests
+	#
+	log_start
+	run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -r ${NSB_IP6}
+	log_test $? 1 "MD5: VRF: Device must be a VRF - single address"
+
+	log_start
+	run_cmd nettest -6 -s -d ${NSA_DEV} -M ${MD5_PW} -m ${NS_NET6}
+	log_test $? 1 "MD5: VRF: Device must be a VRF - prefix"
+
+}
+
+ipv6_tcp_novrf()
+{
+	local a
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		run_cmd nettest -6 -s &
+		sleep 1
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+	done
+
+	# verify TCP reset received
+	for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	#
+	# client
+	#
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
+	do
+		log_start
+		run_cmd_nsb nettest -6 -s &
+		sleep 1
+		run_cmd nettest -6 -r ${a}
+		log_test_addr ${a} $? 0 "Client"
+	done
+
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
+	do
+		log_start
+		run_cmd_nsb nettest -6 -s &
+		sleep 1
+		run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 0 "Client, device bind"
+	done
+
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP6} ${NSA_LO_IP6} ::1
+	do
+		log_start
+		run_cmd nettest -6 -s &
+		sleep 1
+		run_cmd nettest -6 -r ${a}
+		log_test_addr ${a} $? 0 "Global server, local connection"
+	done
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -r ${a} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
+
+	for a in ${NSA_LO_IP6} ::1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
+		run_cmd nettest -6 -s -d ${NSA_DEV} &
+		sleep 1
+		run_cmd nettest -6 -r ${a}
+		log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
+	done
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -s &
+	sleep 1
+	run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
+	log_test_addr ${a} $? 0 "Global server, device client, local connection"
+
+	for a in ${NSA_LO_IP6} ::1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
+		run_cmd nettest -6 -s &
+		sleep 1
+		run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "Global server, device client, local connection"
+	done
+
+	for a in ${NSA_IP6} ${NSA_LINKIP6}
+	do
+		log_start
+		run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd nettest -6  -d ${NSA_DEV} -r ${a}
+		log_test_addr ${a} $? 0 "Device server, device client, local conn"
+	done
+
+	for a in ${NSA_IP6} ${NSA_LINKIP6}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
+		log_test_addr ${a} $? 1 "No server, device client, local conn"
+	done
+
+	[ "$fips_enabled" = "1" ] || ipv6_tcp_md5_novrf
+}
+
+ipv6_tcp_vrf()
+{
+	local a
+
+	# disable global server
+	log_subsection "Global server disabled"
+
+	set_sysctl net.ipv4.tcp_l3mdev_accept=0
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+		run_cmd nettest -6 -s &
+		sleep 1
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 1 "Global server"
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+	done
+
+	# link local is always bound to ingress device
+	a=${NSA_LINKIP6}%${NSB_DEV}
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${a}
+	log_test_addr ${a} $? 0 "VRF server"
+
+	for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 0 "Device server"
+	done
+
+	# verify TCP reset received
+	for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	# local address tests
+	a=${NSA_IP6}
+	log_start
+	show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
+	run_cmd nettest -6 -s &
+	sleep 1
+	run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+	log_test_addr ${a} $? 1 "Global server, local connection"
+
+	# run MD5 tests
+	if [ "$fips_enabled" = "0" ]; then
+		setup_vrf_dup
+		ipv6_tcp_md5
+		cleanup_vrf_dup
+	fi
+
+	#
+	# enable VRF global server
+	#
+	log_subsection "VRF Global server enabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=1
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -s -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+	done
+
+	# For LLA, child socket is bound to device
+	a=${NSA_LINKIP6}%${NSB_DEV}
+	log_start
+	run_cmd nettest -6 -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${a}
+	log_test_addr ${a} $? 0 "Global server"
+
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -6 -r ${a}
+	log_test_addr ${a} $? 0 "VRF server"
+
+	for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 0 "Device server"
+	done
+
+	# verify TCP reset received
+	for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	# local address tests
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		show_hint "Fails 'Connection refused' since client is not in VRF"
+		run_cmd nettest -6 -s -d ${VRF} &
+		sleep 1
+		run_cmd nettest -6 -r ${a}
+		log_test_addr ${a} $? 1 "Global server, local connection"
+	done
+
+
+	#
+	# client
+	#
+	for a in ${NSB_IP6} ${NSB_LO_IP6}
+	do
+		log_start
+		run_cmd_nsb nettest -6 -s &
+		sleep 1
+		run_cmd nettest -6 -r ${a} -d ${VRF}
+		log_test_addr ${a} $? 0 "Client, VRF bind"
+	done
+
+	a=${NSB_LINKIP6}
+	log_start
+	show_hint "Fails since VRF device does not allow linklocal addresses"
+	run_cmd_nsb nettest -6 -s &
+	sleep 1
+	run_cmd nettest -6 -r ${a} -d ${VRF}
+	log_test_addr ${a} $? 1 "Client, VRF bind"
+
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}
+	do
+		log_start
+		run_cmd_nsb nettest -6 -s &
+		sleep 1
+		run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 0 "Client, device bind"
+	done
+
+	for a in ${NSB_IP6} ${NSB_LO_IP6}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -6 -r ${a} -d ${VRF}
+		log_test_addr ${a} $? 1 "No server, VRF client"
+	done
+
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6} ::1
+	do
+		log_start
+		run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+		sleep 1
+		run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
+		log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
+	done
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -s -d ${VRF} -2 ${VRF} &
+	sleep 1
+	run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
+	log_test_addr ${a} $? 0 "VRF server, device client, local connection"
+
+	a=${NSA_IP6}
+	log_start
+	show_hint "Should fail since unbound client is out of VRF scope"
+	run_cmd nettest -6 -s -d ${VRF} &
+	sleep 1
+	run_cmd nettest -6 -r ${a}
+	log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
+
+	log_start
+	run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
+
+	for a in ${NSA_IP6} ${NSA_LINKIP6}
+	do
+		log_start
+		run_cmd nettest -6 -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
+		log_test_addr ${a} $? 0 "Device server, device client, local connection"
+	done
+}
+
+ipv6_tcp()
+{
+	log_section "IPv6/TCP"
+	log_subsection "No VRF"
+	setup
+
+	# tcp_l3mdev_accept should have no affect without VRF;
+	# run tests with it enabled and disabled to verify
+	log_subsection "tcp_l3mdev_accept disabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=0
+	ipv6_tcp_novrf
+	log_subsection "tcp_l3mdev_accept enabled"
+	set_sysctl net.ipv4.tcp_l3mdev_accept=1
+	ipv6_tcp_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv6_tcp_vrf
+}
+
+################################################################################
+# IPv6 UDP
+
+ipv6_udp_novrf()
+{
+	local a
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+
+		log_start
+		run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 0 "Device server"
+	done
+
+	a=${NSA_LO_IP6}
+	log_start
+	run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd_nsb nettest -6 -D -r ${a}
+	log_test_addr ${a} $? 0 "Global server"
+
+	# should fail since loopback address is out of scope for a device
+	# bound server, but it does not - hence this is more documenting
+	# behavior.
+	#log_start
+	#show_hint "Should fail since loopback address is out of scope"
+	#run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+	#sleep 1
+	#run_cmd_nsb nettest -6 -D -r ${a}
+	#log_test_addr ${a} $? 1 "Device server"
+
+	# negative test - should fail
+	for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	#
+	# client
+	#
+	for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
+	do
+		log_start
+		run_cmd_nsb nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a} -0 ${NSA_IP6}
+		log_test_addr ${a} $? 0 "Client"
+
+		log_start
+		run_cmd_nsb nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP6}
+		log_test_addr ${a} $? 0 "Client, device bind"
+
+		log_start
+		run_cmd_nsb nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP6}
+		log_test_addr ${a} $? 0 "Client, device send via cmsg"
+
+		log_start
+		run_cmd_nsb nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP6}
+		log_test_addr ${a} $? 0 "Client, device bind via IPV6_UNICAST_IF"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 1 "No server, unbound client"
+
+		log_start
+		show_hint "Should fail 'Connection refused'"
+		run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "No server, device client"
+	done
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP6} ${NSA_LO_IP6} ::1
+	do
+		log_start
+		run_cmd nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a} -0 ${a} -1 ${a}
+		log_test_addr ${a} $? 0 "Global server, local connection"
+	done
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -s -D -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -r ${a}
+	log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
+
+	for a in ${NSA_LO_IP6} ::1
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since address is out of device scope"
+		run_cmd nettest -6 -s -D -d ${NSA_DEV} &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 1 "Device server, local connection"
+	done
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -s -D &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device client, local connection"
+
+	log_start
+	run_cmd nettest -6 -s -D &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -C -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
+
+	log_start
+	run_cmd nettest -6 -s -D &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -S -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device client via IPV6_UNICAST_IF, local connection"
+
+	for a in ${NSA_LO_IP6} ::1
+	do
+		log_start
+		show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
+		run_cmd nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV}
+		log_test_addr ${a} $? 1 "Global server, device client, local connection"
+
+		log_start
+		show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
+		run_cmd nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C
+		log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
+
+		log_start
+		show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
+		run_cmd nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S
+		log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
+	done
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -D -s -d ${NSA_DEV} -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a}
+	log_test_addr ${a} $? 0 "Device server, device client, local conn"
+
+	log_start
+	show_hint "Should fail 'Connection refused'"
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 1 "No server, device client, local conn"
+
+	# LLA to GUA
+	run_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV}
+	run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV}
+	log_start
+	run_cmd nettest -6 -s -D &
+	sleep 1
+	run_cmd_nsb nettest -6 -D -r ${NSA_IP6}
+	log_test $? 0 "UDP in - LLA to GUA"
+
+	run_cmd_nsb ip -6 ro del ${NSA_IP6}/128 dev ${NSB_DEV}
+	run_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV} nodad
+}
+
+ipv6_udp_vrf()
+{
+	local a
+
+	# disable global server
+	log_subsection "Global server disabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=0
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since global server is disabled"
+		run_cmd nettest -6 -D -s &
+		sleep 1
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 1 "Global server"
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 0 "Enslaved device server"
+	done
+
+	# negative test - should fail
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since there is no server"
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		show_hint "Should fail 'Connection refused' since global server is disabled"
+		run_cmd nettest -6 -D -s &
+		sleep 1
+		run_cmd nettest -6 -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 1 "Global server, VRF client, local conn"
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -D -d ${VRF} -s &
+		sleep 1
+		run_cmd nettest -6 -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+	done
+
+	a=${NSA_IP6}
+	log_start
+	show_hint "Should fail 'Connection refused' since global server is disabled"
+	run_cmd nettest -6 -D -s &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 1 "Global server, device client, local conn"
+
+	log_start
+	run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, device client, local conn"
+
+	log_start
+	run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
+
+	# disable global server
+	log_subsection "Global server enabled"
+	set_sysctl net.ipv4.udp_l3mdev_accept=1
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 0 "Global server"
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 0 "VRF server"
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+		sleep 1
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 0 "Enslaved device server"
+	done
+
+	# negative test - should fail
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd_nsb nettest -6 -D -r ${a}
+		log_test_addr ${a} $? 1 "No server"
+	done
+
+	#
+	# client tests
+	#
+	log_start
+	run_cmd_nsb nettest -6 -D -s &
+	sleep 1
+	run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6}
+	log_test $? 0 "VRF client"
+
+	# negative test - should fail
+	log_start
+	run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6}
+	log_test $? 1 "No server, VRF client"
+
+	log_start
+	run_cmd_nsb nettest -6 -D -s &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6}
+	log_test $? 0 "Enslaved device client"
+
+	# negative test - should fail
+	log_start
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6}
+	log_test $? 1 "No server, enslaved device client"
+
+	#
+	# local address tests
+	#
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
+
+	#log_start
+	run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+
+
+	a=${VRF_IP6}
+	log_start
+	run_cmd nettest -6 -D -s -2 ${VRF} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -6 -D -d ${VRF} -s -2 ${VRF} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
+
+	# negative test - should fail
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -D -d ${VRF} -r ${a}
+		log_test_addr ${a} $? 1 "No server, VRF client, local conn"
+	done
+
+	# device to global IP
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -D -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Global server, device client, local conn"
+
+	log_start
+	run_cmd nettest -6 -D -d ${VRF} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "VRF server, device client, local conn"
+
+	log_start
+	run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${VRF} -r ${a}
+	log_test_addr ${a} $? 0 "Device server, VRF client, local conn"
+
+	log_start
+	run_cmd nettest -6 -D -d ${NSA_DEV} -s -2 ${NSA_DEV} &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 0 "Device server, device client, local conn"
+
+	log_start
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
+	log_test_addr ${a} $? 1 "No server, device client, local conn"
+
+
+	# link local addresses
+	log_start
+	run_cmd nettest -6 -D -s &
+	sleep 1
+	run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6}
+	log_test $? 0 "Global server, linklocal IP"
+
+	log_start
+	run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6}
+	log_test $? 1 "No server, linklocal IP"
+
+
+	log_start
+	run_cmd_nsb nettest -6 -D -s &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6}
+	log_test $? 0 "Enslaved device client, linklocal IP"
+
+	log_start
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6}
+	log_test $? 1 "No server, device client, peer linklocal IP"
+
+
+	log_start
+	run_cmd nettest -6 -D -s &
+	sleep 1
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6}
+	log_test $? 0 "Enslaved device client, local conn - linklocal IP"
+
+	log_start
+	run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6}
+	log_test $? 1 "No server, device client, local conn  - linklocal IP"
+
+	# LLA to GUA
+	run_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV}
+	run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV}
+	log_start
+	run_cmd nettest -6 -s -D &
+	sleep 1
+	run_cmd_nsb nettest -6 -D -r ${NSA_IP6}
+	log_test $? 0 "UDP in - LLA to GUA"
+
+	run_cmd_nsb ip -6 ro del ${NSA_IP6}/128 dev ${NSB_DEV}
+	run_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV} nodad
+}
+
+ipv6_udp()
+{
+        # should not matter, but set to known state
+        set_sysctl net.ipv4.udp_early_demux=1
+
+        log_section "IPv6/UDP"
+        log_subsection "No VRF"
+        setup
+
+        # udp_l3mdev_accept should have no affect without VRF;
+        # run tests with it enabled and disabled to verify
+        log_subsection "udp_l3mdev_accept disabled"
+        set_sysctl net.ipv4.udp_l3mdev_accept=0
+        ipv6_udp_novrf
+        log_subsection "udp_l3mdev_accept enabled"
+        set_sysctl net.ipv4.udp_l3mdev_accept=1
+        ipv6_udp_novrf
+
+        log_subsection "With VRF"
+        setup "yes"
+        ipv6_udp_vrf
+}
+
+################################################################################
+# IPv6 address bind
+
+ipv6_addr_bind_novrf()
+{
+	#
+	# raw socket
+	#
+	for a in ${NSA_IP6} ${NSA_LO_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -b
+		log_test_addr ${a} $? 0 "Raw socket bind to local address"
+
+		log_start
+		run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b
+		log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
+	done
+
+	#
+	# tcp sockets
+	#
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -s -l ${a} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to local address"
+
+	log_start
+	run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to local address after device bind"
+
+	# Sadly, the kernel allows binding a socket to a device and then
+	# binding to an address not on the device. So this test passes
+	# when it really should not
+	a=${NSA_LO_IP6}
+	log_start
+	show_hint "Tecnically should fail since address is not on device but kernel allows"
+	run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to out of scope local address"
+}
+
+ipv6_addr_bind_vrf()
+{
+	#
+	# raw socket
+	#
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b
+		log_test_addr ${a} $? 0 "Raw socket bind to local address after vrf bind"
+
+		log_start
+		run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${NSA_DEV} -b
+		log_test_addr ${a} $? 0 "Raw socket bind to local address after device bind"
+	done
+
+	a=${NSA_LO_IP6}
+	log_start
+	show_hint "Address on loopback is out of VRF scope"
+	run_cmd nettest -6 -s -R -P ipv6-icmp -l ${a} -d ${VRF} -b
+	log_test_addr ${a} $? 1 "Raw socket bind to invalid local address after vrf bind"
+
+	#
+	# tcp sockets
+	#
+	# address on enslaved device is valid for the VRF or device in a VRF
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b
+		log_test_addr ${a} $? 0 "TCP socket bind to local address with VRF bind"
+	done
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to local address with device bind"
+
+	# Sadly, the kernel allows binding a socket to a device and then
+	# binding to an address not on the device. The only restriction
+	# is that the address is valid in the L3 domain. So this test
+	# passes when it really should not
+	a=${VRF_IP6}
+	log_start
+	show_hint "Tecnically should fail since address is not on device but kernel allows"
+	run_cmd nettest -6 -s -l ${a} -I ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 0 "TCP socket bind to VRF address with device bind"
+
+	a=${NSA_LO_IP6}
+	log_start
+	show_hint "Address on loopback out of scope for VRF"
+	run_cmd nettest -6 -s -l ${a} -d ${VRF} -t1 -b
+	log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for VRF"
+
+	log_start
+	show_hint "Address on loopback out of scope for device in VRF"
+	run_cmd nettest -6 -s -l ${a} -d ${NSA_DEV} -t1 -b
+	log_test_addr ${a} $? 1 "TCP socket bind to invalid local address for device bind"
+
+}
+
+ipv6_addr_bind()
+{
+	log_section "IPv6 address binds"
+
+	log_subsection "No VRF"
+	setup
+	ipv6_addr_bind_novrf
+
+	log_subsection "With VRF"
+	setup "yes"
+	ipv6_addr_bind_vrf
+}
+
+################################################################################
+# IPv6 runtime tests
+
+ipv6_rt()
+{
+	local desc="$1"
+	local varg="-6 $2"
+	local with_vrf="yes"
+	local a
+
+	#
+	# server tests
+	#
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest ${varg} -s &
+		sleep 1
+		run_cmd_nsb nettest ${varg} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, global server"
+
+		setup ${with_vrf}
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest ${varg} -d ${VRF} -s &
+		sleep 1
+		run_cmd_nsb nettest ${varg} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, VRF server"
+
+		setup ${with_vrf}
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+		sleep 1
+		run_cmd_nsb nettest ${varg} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, enslaved device server"
+
+		setup ${with_vrf}
+	done
+
+	#
+	# client test
+	#
+	log_start
+	run_cmd_nsb nettest ${varg} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP6} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test  0 0 "${desc}, VRF client"
+
+	setup ${with_vrf}
+
+	log_start
+	run_cmd_nsb nettest ${varg} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP6} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test  0 0 "${desc}, enslaved device client"
+
+	setup ${with_vrf}
+
+
+	#
+	# local address tests
+	#
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest ${varg} -s &
+		sleep 1
+		run_cmd nettest ${varg} -d ${VRF} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, global server, VRF client"
+
+		setup ${with_vrf}
+	done
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest ${varg} -d ${VRF} -s &
+		sleep 1
+		run_cmd nettest ${varg} -d ${VRF} -r ${a} &
+		sleep 3
+		run_cmd ip link del ${VRF}
+		sleep 1
+		log_test_addr ${a} 0 0 "${desc}, VRF server and client"
+
+		setup ${with_vrf}
+	done
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd nettest ${varg} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, global server, device client"
+
+	setup ${with_vrf}
+
+	log_start
+	run_cmd nettest ${varg} -d ${VRF} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, VRF server, device client"
+
+	setup ${with_vrf}
+
+	log_start
+	run_cmd nettest ${varg} -d ${NSA_DEV} -s &
+	sleep 1
+	run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "${desc}, device server, device client"
+}
+
+ipv6_ping_rt()
+{
+	local with_vrf="yes"
+	local a
+
+	a=${NSA_IP6}
+	log_start
+	run_cmd_nsb ${ping6} -f ${a} &
+	sleep 3
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "Device delete with active traffic - ping in"
+
+	setup ${with_vrf}
+
+	log_start
+	run_cmd ${ping6} -f ${NSB_IP6} -I ${VRF} &
+	sleep 1
+	run_cmd ip link del ${VRF}
+	sleep 1
+	log_test_addr ${a} 0 0 "Device delete with active traffic - ping out"
+}
+
+ipv6_runtime()
+{
+	log_section "Run time tests - ipv6"
+
+	setup "yes"
+	ipv6_ping_rt
+
+	setup "yes"
+	ipv6_rt "TCP active socket"  "-n -1"
+
+	setup "yes"
+	ipv6_rt "TCP passive socket" "-i"
+
+	setup "yes"
+	ipv6_rt "UDP active socket"  "-D -n -1"
+}
+
+################################################################################
+# netfilter blocking connections
+
+netfilter_tcp_reset()
+{
+	local a
+
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest -s &
+		sleep 1
+		run_cmd_nsb nettest -r ${a}
+		log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx"
+	done
+}
+
+netfilter_icmp()
+{
+	local stype="$1"
+	local arg
+	local a
+
+	[ "${stype}" = "UDP" ] && arg="-D"
+
+	for a in ${NSA_IP} ${VRF_IP}
+	do
+		log_start
+		run_cmd nettest ${arg} -s &
+		sleep 1
+		run_cmd_nsb nettest ${arg} -r ${a}
+		log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach"
+	done
+}
+
+ipv4_netfilter()
+{
+	log_section "IPv4 Netfilter"
+	log_subsection "TCP reset"
+
+	setup "yes"
+	run_cmd iptables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with tcp-reset
+
+	netfilter_tcp_reset
+
+	log_start
+	log_subsection "ICMP unreachable"
+
+	log_start
+	run_cmd iptables -F
+	run_cmd iptables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with icmp-port-unreachable
+	run_cmd iptables -A INPUT -p udp --dport 12345 -j REJECT --reject-with icmp-port-unreachable
+
+	netfilter_icmp "TCP"
+	netfilter_icmp "UDP"
+
+	log_start
+	iptables -F
+}
+
+netfilter_tcp6_reset()
+{
+	local a
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -s &
+		sleep 1
+		run_cmd_nsb nettest -6 -r ${a}
+		log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx"
+	done
+}
+
+netfilter_icmp6()
+{
+	local stype="$1"
+	local arg
+	local a
+
+	[ "${stype}" = "UDP" ] && arg="$arg -D"
+
+	for a in ${NSA_IP6} ${VRF_IP6}
+	do
+		log_start
+		run_cmd nettest -6 -s ${arg} &
+		sleep 1
+		run_cmd_nsb nettest -6 ${arg} -r ${a}
+		log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach"
+	done
+}
+
+ipv6_netfilter()
+{
+	log_section "IPv6 Netfilter"
+	log_subsection "TCP reset"
+
+	setup "yes"
+	run_cmd ip6tables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with tcp-reset
+
+	netfilter_tcp6_reset
+
+	log_subsection "ICMP unreachable"
+
+	log_start
+	run_cmd ip6tables -F
+	run_cmd ip6tables -A INPUT -p tcp --dport 12345 -j REJECT --reject-with icmp6-port-unreachable
+	run_cmd ip6tables -A INPUT -p udp --dport 12345 -j REJECT --reject-with icmp6-port-unreachable
+
+	netfilter_icmp6 "TCP"
+	netfilter_icmp6 "UDP"
+
+	log_start
+	ip6tables -F
+}
+
+################################################################################
+# specific use cases
+
+# VRF only.
+# ns-A device enslaved to bridge. Verify traffic with and without
+# br_netfilter module loaded. Repeat with SVI on bridge.
+use_case_br()
+{
+	setup "yes"
+
+	setup_cmd ip link set ${NSA_DEV} down
+	setup_cmd ip addr del dev ${NSA_DEV} ${NSA_IP}/24
+	setup_cmd ip -6 addr del dev ${NSA_DEV} ${NSA_IP6}/64
+
+	setup_cmd ip link add br0 type bridge
+	setup_cmd ip addr add dev br0 ${NSA_IP}/24
+	setup_cmd ip -6 addr add dev br0 ${NSA_IP6}/64 nodad
+
+	setup_cmd ip li set ${NSA_DEV} master br0
+	setup_cmd ip li set ${NSA_DEV} up
+	setup_cmd ip li set br0 up
+	setup_cmd ip li set br0 vrf ${VRF}
+
+	rmmod br_netfilter 2>/dev/null
+	sleep 5 # DAD
+
+	run_cmd ip neigh flush all
+	run_cmd ping -c1 -w1 -I br0 ${NSB_IP}
+	log_test $? 0 "Bridge into VRF - IPv4 ping out"
+
+	run_cmd ip neigh flush all
+	run_cmd ${ping6} -c1 -w1 -I br0 ${NSB_IP6}
+	log_test $? 0 "Bridge into VRF - IPv6 ping out"
+
+	run_cmd ip neigh flush all
+	run_cmd_nsb ping -c1 -w1 ${NSA_IP}
+	log_test $? 0 "Bridge into VRF - IPv4 ping in"
+
+	run_cmd ip neigh flush all
+	run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6}
+	log_test $? 0 "Bridge into VRF - IPv6 ping in"
+
+	modprobe br_netfilter
+	if [ $? -eq 0 ]; then
+		run_cmd ip neigh flush all
+		run_cmd ping -c1 -w1 -I br0 ${NSB_IP}
+		log_test $? 0 "Bridge into VRF with br_netfilter - IPv4 ping out"
+
+		run_cmd ip neigh flush all
+		run_cmd ${ping6} -c1 -w1 -I br0 ${NSB_IP6}
+		log_test $? 0 "Bridge into VRF with br_netfilter - IPv6 ping out"
+
+		run_cmd ip neigh flush all
+		run_cmd_nsb ping -c1 -w1 ${NSA_IP}
+		log_test $? 0 "Bridge into VRF with br_netfilter - IPv4 ping in"
+
+		run_cmd ip neigh flush all
+		run_cmd_nsb ${ping6} -c1 -w1 ${NSA_IP6}
+		log_test $? 0 "Bridge into VRF with br_netfilter - IPv6 ping in"
+	fi
+
+	setup_cmd ip li set br0 nomaster
+	setup_cmd ip li add br0.100 link br0 type vlan id 100
+	setup_cmd ip li set br0.100 vrf ${VRF} up
+	setup_cmd ip    addr add dev br0.100 172.16.101.1/24
+	setup_cmd ip -6 addr add dev br0.100 2001:db8:101::1/64 nodad
+
+	setup_cmd_nsb ip li add vlan100 link ${NSB_DEV} type vlan id 100
+	setup_cmd_nsb ip addr add dev vlan100 172.16.101.2/24
+	setup_cmd_nsb ip -6 addr add dev vlan100 2001:db8:101::2/64 nodad
+	setup_cmd_nsb ip li set vlan100 up
+	sleep 1
+
+	rmmod br_netfilter 2>/dev/null
+
+	run_cmd ip neigh flush all
+	run_cmd ping -c1 -w1 -I br0.100 172.16.101.2
+	log_test $? 0 "Bridge vlan into VRF - IPv4 ping out"
+
+	run_cmd ip neigh flush all
+	run_cmd ${ping6} -c1 -w1 -I br0.100 2001:db8:101::2
+	log_test $? 0 "Bridge vlan into VRF - IPv6 ping out"
+
+	run_cmd ip neigh flush all
+	run_cmd_nsb ping -c1 -w1 172.16.101.1
+	log_test $? 0 "Bridge vlan into VRF - IPv4 ping in"
+
+	run_cmd ip neigh flush all
+	run_cmd_nsb ${ping6} -c1 -w1 2001:db8:101::1
+	log_test $? 0 "Bridge vlan into VRF - IPv6 ping in"
+
+	modprobe br_netfilter
+	if [ $? -eq 0 ]; then
+		run_cmd ip neigh flush all
+		run_cmd ping -c1 -w1 -I br0.100 172.16.101.2
+		log_test $? 0 "Bridge vlan into VRF with br_netfilter - IPv4 ping out"
+
+		run_cmd ip neigh flush all
+		run_cmd ${ping6} -c1 -w1 -I br0.100 2001:db8:101::2
+		log_test $? 0 "Bridge vlan into VRF with br_netfilter - IPv6 ping out"
+
+		run_cmd ip neigh flush all
+		run_cmd_nsb ping -c1 -w1 172.16.101.1
+		log_test $? 0 "Bridge vlan into VRF - IPv4 ping in"
+
+		run_cmd ip neigh flush all
+		run_cmd_nsb ${ping6} -c1 -w1 2001:db8:101::1
+		log_test $? 0 "Bridge vlan into VRF - IPv6 ping in"
+	fi
+
+	setup_cmd ip li del br0 2>/dev/null
+	setup_cmd_nsb ip li del vlan100 2>/dev/null
+}
+
+# VRF only.
+# ns-A device is connected to both ns-B and ns-C on a single VRF but only has
+# LLA on the interfaces
+use_case_ping_lla_multi()
+{
+	setup_lla_only
+	# only want reply from ns-A
+	setup_cmd_nsb sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1
+	setup_cmd_nsc sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1
+
+	log_start
+	run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}
+	log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Pre cycle, ping out ns-B"
+
+	run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}
+	log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Pre cycle, ping out ns-C"
+
+	# cycle/flap the first ns-A interface
+	setup_cmd ip link set ${NSA_DEV} down
+	setup_cmd ip link set ${NSA_DEV} up
+	sleep 1
+
+	log_start
+	run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}
+	log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-B"
+	run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}
+	log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-C"
+
+	# cycle/flap the second ns-A interface
+	setup_cmd ip link set ${NSA_DEV2} down
+	setup_cmd ip link set ${NSA_DEV2} up
+	sleep 1
+
+	log_start
+	run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV}
+	log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-B"
+	run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV}
+	log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-C"
+}
+
+use_cases()
+{
+	log_section "Use cases"
+	log_subsection "Device enslaved to bridge"
+	use_case_br
+	log_subsection "Ping LLA with multiple interfaces"
+	use_case_ping_lla_multi
+}
+
+################################################################################
+# usage
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+
+	-4          IPv4 tests only
+	-6          IPv6 tests only
+	-t <test>   Test name/set to run
+	-p          Pause on fail
+	-P          Pause after each test
+	-v          Be verbose
+EOF
+}
+
+################################################################################
+# main
+
+TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_bind ipv4_runtime ipv4_netfilter"
+TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp ipv6_bind ipv6_runtime ipv6_netfilter"
+TESTS_OTHER="use_cases"
+
+PAUSE_ON_FAIL=no
+PAUSE=no
+
+while getopts :46t:pPvh o
+do
+	case $o in
+		4) TESTS=ipv4;;
+		6) TESTS=ipv6;;
+		t) TESTS=$OPTARG;;
+		p) PAUSE_ON_FAIL=yes;;
+		P) PAUSE=yes;;
+		v) VERBOSE=1;;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+# make sure we don't pause twice
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+#
+# show user test config
+#
+if [ -z "$TESTS" ]; then
+	TESTS="$TESTS_IPV4 $TESTS_IPV6 $TESTS_OTHER"
+elif [ "$TESTS" = "ipv4" ]; then
+	TESTS="$TESTS_IPV4"
+elif [ "$TESTS" = "ipv6" ]; then
+	TESTS="$TESTS_IPV6"
+fi
+
+which nettest >/dev/null
+if [ $? -ne 0 ]; then
+	echo "'nettest' command not found; skipping tests"
+	exit 0
+fi
+
+declare -i nfail=0
+declare -i nsuccess=0
+
+for t in $TESTS
+do
+	case $t in
+	ipv4_ping|ping)  ipv4_ping;;
+	ipv4_tcp|tcp)    ipv4_tcp;;
+	ipv4_udp|udp)    ipv4_udp;;
+	ipv4_bind|bind)  ipv4_addr_bind;;
+	ipv4_runtime)    ipv4_runtime;;
+	ipv4_netfilter)  ipv4_netfilter;;
+
+	ipv6_ping|ping6) ipv6_ping;;
+	ipv6_tcp|tcp6)   ipv6_tcp;;
+	ipv6_udp|udp6)   ipv6_udp;;
+	ipv6_bind|bind6) ipv6_addr_bind;;
+	ipv6_runtime)    ipv6_runtime;;
+	ipv6_netfilter)  ipv6_netfilter;;
+
+	use_cases)       use_cases;;
+
+	# setup namespaces and config, but do not run any tests
+	setup)		 setup; exit 0;;
+	vrf_setup)	 setup "yes"; exit 0;;
+
+	help)            echo "Test names: $TESTS"; exit 0;;
+	esac
+done
+
+cleanup 2>/dev/null
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n"   ${nfail}
diff --git a/tools/testing/selftests/net/fib-onlink-tests.sh b/tools/testing/selftests/net/fib-onlink-tests.sh
new file mode 100755
index 000000000..c287b90b8
--- /dev/null
+++ b/tools/testing/selftests/net/fib-onlink-tests.sh
@@ -0,0 +1,505 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# IPv4 and IPv6 onlink tests
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+VERBOSE=0
+
+# Network interfaces
+# - odd in current namespace; even in peer ns
+declare -A NETIFS
+# default VRF
+NETIFS[p1]=veth1
+NETIFS[p2]=veth2
+NETIFS[p3]=veth3
+NETIFS[p4]=veth4
+# VRF
+NETIFS[p5]=veth5
+NETIFS[p6]=veth6
+NETIFS[p7]=veth7
+NETIFS[p8]=veth8
+
+# /24 network
+declare -A V4ADDRS
+V4ADDRS[p1]=169.254.1.1
+V4ADDRS[p2]=169.254.1.2
+V4ADDRS[p3]=169.254.3.1
+V4ADDRS[p4]=169.254.3.2
+V4ADDRS[p5]=169.254.5.1
+V4ADDRS[p6]=169.254.5.2
+V4ADDRS[p7]=169.254.7.1
+V4ADDRS[p8]=169.254.7.2
+
+# /64 network
+declare -A V6ADDRS
+V6ADDRS[p1]=2001:db8:101::1
+V6ADDRS[p2]=2001:db8:101::2
+V6ADDRS[p3]=2001:db8:301::1
+V6ADDRS[p4]=2001:db8:301::2
+V6ADDRS[p5]=2001:db8:501::1
+V6ADDRS[p6]=2001:db8:501::2
+V6ADDRS[p7]=2001:db8:701::1
+V6ADDRS[p8]=2001:db8:701::2
+
+# Test networks:
+# [1] = default table
+# [2] = VRF
+#
+# /32 host routes
+declare -A TEST_NET4
+TEST_NET4[1]=169.254.101
+TEST_NET4[2]=169.254.102
+# /128 host routes
+declare -A TEST_NET6
+TEST_NET6[1]=2001:db8:101
+TEST_NET6[2]=2001:db8:102
+
+# connected gateway
+CONGW[1]=169.254.1.254
+CONGW[2]=169.254.3.254
+CONGW[3]=169.254.5.254
+
+# recursive gateway
+RECGW4[1]=169.254.11.254
+RECGW4[2]=169.254.12.254
+RECGW6[1]=2001:db8:11::64
+RECGW6[2]=2001:db8:12::64
+
+# for v4 mapped to v6
+declare -A TEST_NET4IN6IN6
+TEST_NET4IN6[1]=10.1.1.254
+TEST_NET4IN6[2]=10.2.1.254
+
+# mcast address
+MCAST6=ff02::1
+
+
+PEER_NS=bart
+PEER_CMD="ip netns exec ${PEER_NS}"
+VRF=lisa
+VRF_TABLE=1101
+PBR_TABLE=101
+
+################################################################################
+# utilities
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		nsuccess=$((nsuccess+1))
+		printf "    TEST: %-50s  [ OK ]\n" "${msg}"
+	else
+		nfail=$((nfail+1))
+		printf "    TEST: %-50s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+log_section()
+{
+	echo
+	echo "######################################################################"
+	echo "TEST SECTION: $*"
+	echo "######################################################################"
+}
+
+log_subsection()
+{
+	echo
+	echo "#########################################"
+	echo "TEST SUBSECTION: $*"
+}
+
+run_cmd()
+{
+	local cmd="$*"
+	local out
+	local rc
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "    COMMAND: $cmd\n"
+	fi
+
+	out=$(eval $cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+get_linklocal()
+{
+	local dev=$1
+	local pfx
+	local addr
+
+	addr=$(${pfx} ip -6 -br addr show dev ${dev} | \
+	awk '{
+		for (i = 3; i <= NF; ++i) {
+			if ($i ~ /^fe80/)
+				print $i
+		}
+	}'
+	)
+	addr=${addr/\/*}
+
+	[ -z "$addr" ] && return 1
+
+	echo $addr
+
+	return 0
+}
+
+################################################################################
+#
+
+setup()
+{
+	echo
+	echo "########################################"
+	echo "Configuring interfaces"
+
+	set -e
+
+	# create namespace
+	ip netns add ${PEER_NS}
+	ip -netns ${PEER_NS} li set lo up
+
+	# add vrf table
+	ip li add ${VRF} type vrf table ${VRF_TABLE}
+	ip li set ${VRF} up
+	ip ro add table ${VRF_TABLE} unreachable default metric 8192
+	ip -6 ro add table ${VRF_TABLE} unreachable default metric 8192
+
+	# create test interfaces
+	ip li add ${NETIFS[p1]} type veth peer name ${NETIFS[p2]}
+	ip li add ${NETIFS[p3]} type veth peer name ${NETIFS[p4]}
+	ip li add ${NETIFS[p5]} type veth peer name ${NETIFS[p6]}
+	ip li add ${NETIFS[p7]} type veth peer name ${NETIFS[p8]}
+
+	# enslave vrf interfaces
+	for n in 5 7; do
+		ip li set ${NETIFS[p${n}]} vrf ${VRF}
+	done
+
+	# add addresses
+	for n in 1 3 5 7; do
+		ip li set ${NETIFS[p${n}]} up
+		ip addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]}
+		ip addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]} nodad
+	done
+
+	# move peer interfaces to namespace and add addresses
+	for n in 2 4 6 8; do
+		ip li set ${NETIFS[p${n}]} netns ${PEER_NS} up
+		ip -netns ${PEER_NS} addr add ${V4ADDRS[p${n}]}/24 dev ${NETIFS[p${n}]}
+		ip -netns ${PEER_NS} addr add ${V6ADDRS[p${n}]}/64 dev ${NETIFS[p${n}]} nodad
+	done
+
+	ip -6 ro add default via ${V6ADDRS[p3]/::[0-9]/::64}
+	ip -6 ro add table ${VRF_TABLE} default via ${V6ADDRS[p7]/::[0-9]/::64}
+
+	set +e
+}
+
+cleanup()
+{
+	# make sure we start from a clean slate
+	ip netns del ${PEER_NS} 2>/dev/null
+	for n in 1 3 5 7; do
+		ip link del ${NETIFS[p${n}]} 2>/dev/null
+	done
+	ip link del ${VRF} 2>/dev/null
+	ip ro flush table ${VRF_TABLE}
+	ip -6 ro flush table ${VRF_TABLE}
+}
+
+################################################################################
+# IPv4 tests
+#
+
+run_ip()
+{
+	local table="$1"
+	local prefix="$2"
+	local gw="$3"
+	local dev="$4"
+	local exp_rc="$5"
+	local desc="$6"
+
+	# dev arg may be empty
+	[ -n "${dev}" ] && dev="dev ${dev}"
+
+	run_cmd ip ro add table "${table}" "${prefix}"/32 via "${gw}" "${dev}" onlink
+	log_test $? ${exp_rc} "${desc}"
+}
+
+run_ip_mpath()
+{
+	local table="$1"
+	local prefix="$2"
+	local nh1="$3"
+	local nh2="$4"
+	local exp_rc="$5"
+	local desc="$6"
+
+	# dev arg may be empty
+	[ -n "${dev}" ] && dev="dev ${dev}"
+
+	run_cmd ip ro add table "${table}" "${prefix}"/32 \
+		nexthop via ${nh1} nexthop via ${nh2}
+	log_test $? ${exp_rc} "${desc}"
+}
+
+valid_onlink_ipv4()
+{
+	# - unicast connected, unicast recursive
+	#
+	log_subsection "default VRF - main table"
+
+	run_ip 254 ${TEST_NET4[1]}.1 ${CONGW[1]} ${NETIFS[p1]} 0 "unicast connected"
+	run_ip 254 ${TEST_NET4[1]}.2 ${RECGW4[1]} ${NETIFS[p1]} 0 "unicast recursive"
+
+	log_subsection "VRF ${VRF}"
+
+	run_ip ${VRF_TABLE} ${TEST_NET4[2]}.1 ${CONGW[3]} ${NETIFS[p5]} 0 "unicast connected"
+	run_ip ${VRF_TABLE} ${TEST_NET4[2]}.2 ${RECGW4[2]} ${NETIFS[p5]} 0 "unicast recursive"
+
+	log_subsection "VRF device, PBR table"
+
+	run_ip ${PBR_TABLE} ${TEST_NET4[2]}.3 ${CONGW[3]} ${NETIFS[p5]} 0 "unicast connected"
+	run_ip ${PBR_TABLE} ${TEST_NET4[2]}.4 ${RECGW4[2]} ${NETIFS[p5]} 0 "unicast recursive"
+
+	# multipath version
+	#
+	log_subsection "default VRF - main table - multipath"
+
+	run_ip_mpath 254 ${TEST_NET4[1]}.5 \
+		"${CONGW[1]} dev ${NETIFS[p1]} onlink" \
+		"${CONGW[2]} dev ${NETIFS[p3]} onlink" \
+		0 "unicast connected - multipath"
+
+	run_ip_mpath 254 ${TEST_NET4[1]}.6 \
+		"${RECGW4[1]} dev ${NETIFS[p1]} onlink" \
+		"${RECGW4[2]} dev ${NETIFS[p3]} onlink" \
+		0 "unicast recursive - multipath"
+
+	run_ip_mpath 254 ${TEST_NET4[1]}.7 \
+		"${CONGW[1]} dev ${NETIFS[p1]}"        \
+		"${CONGW[2]} dev ${NETIFS[p3]} onlink" \
+		0 "unicast connected - multipath onlink first only"
+
+	run_ip_mpath 254 ${TEST_NET4[1]}.8 \
+		"${CONGW[1]} dev ${NETIFS[p1]} onlink" \
+		"${CONGW[2]} dev ${NETIFS[p3]}"        \
+		0 "unicast connected - multipath onlink second only"
+}
+
+invalid_onlink_ipv4()
+{
+	run_ip 254 ${TEST_NET4[1]}.11 ${V4ADDRS[p1]} ${NETIFS[p1]} 2 \
+		"Invalid gw - local unicast address"
+
+	run_ip ${VRF_TABLE} ${TEST_NET4[2]}.11 ${V4ADDRS[p5]} ${NETIFS[p5]} 2 \
+		"Invalid gw - local unicast address, VRF"
+
+	run_ip 254 ${TEST_NET4[1]}.101 ${V4ADDRS[p1]} "" 2 "No nexthop device given"
+
+	run_ip 254 ${TEST_NET4[1]}.102 ${V4ADDRS[p3]} ${NETIFS[p1]} 2 \
+		"Gateway resolves to wrong nexthop device"
+
+	run_ip ${VRF_TABLE} ${TEST_NET4[2]}.103 ${V4ADDRS[p7]} ${NETIFS[p5]} 2 \
+		"Gateway resolves to wrong nexthop device - VRF"
+}
+
+################################################################################
+# IPv6 tests
+#
+
+run_ip6()
+{
+	local table="$1"
+	local prefix="$2"
+	local gw="$3"
+	local dev="$4"
+	local exp_rc="$5"
+	local desc="$6"
+
+	# dev arg may be empty
+	[ -n "${dev}" ] && dev="dev ${dev}"
+
+	run_cmd ip -6 ro add table "${table}" "${prefix}"/128 via "${gw}" "${dev}" onlink
+	log_test $? ${exp_rc} "${desc}"
+}
+
+run_ip6_mpath()
+{
+	local table="$1"
+	local prefix="$2"
+	local opts="$3"
+	local nh1="$4"
+	local nh2="$5"
+	local exp_rc="$6"
+	local desc="$7"
+
+	run_cmd ip -6 ro add table "${table}" "${prefix}"/128 "${opts}" \
+		nexthop via ${nh1} nexthop via ${nh2}
+	log_test $? ${exp_rc} "${desc}"
+}
+
+valid_onlink_ipv6()
+{
+	# - unicast connected, unicast recursive, v4-mapped
+	#
+	log_subsection "default VRF - main table"
+
+	run_ip6 254 ${TEST_NET6[1]}::1 ${V6ADDRS[p1]/::*}::64 ${NETIFS[p1]} 0 "unicast connected"
+	run_ip6 254 ${TEST_NET6[1]}::2 ${RECGW6[1]} ${NETIFS[p1]} 0 "unicast recursive"
+	run_ip6 254 ${TEST_NET6[1]}::3 ::ffff:${TEST_NET4IN6[1]} ${NETIFS[p1]} 0 "v4-mapped"
+
+	log_subsection "VRF ${VRF}"
+
+	run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::1 ${V6ADDRS[p5]/::*}::64 ${NETIFS[p5]} 0 "unicast connected"
+	run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::2 ${RECGW6[2]} ${NETIFS[p5]} 0 "unicast recursive"
+	run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::3 ::ffff:${TEST_NET4IN6[2]} ${NETIFS[p5]} 0 "v4-mapped"
+
+	log_subsection "VRF device, PBR table"
+
+	run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::4 ${V6ADDRS[p5]/::*}::64 ${NETIFS[p5]} 0 "unicast connected"
+	run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::5 ${RECGW6[2]} ${NETIFS[p5]} 0 "unicast recursive"
+	run_ip6 ${PBR_TABLE} ${TEST_NET6[2]}::6 ::ffff:${TEST_NET4IN6[2]} ${NETIFS[p5]} 0 "v4-mapped"
+
+	# multipath version
+	#
+	log_subsection "default VRF - main table - multipath"
+
+	run_ip6_mpath 254 ${TEST_NET6[1]}::4 "onlink" \
+		"${V6ADDRS[p1]/::*}::64 dev ${NETIFS[p1]}" \
+		"${V6ADDRS[p3]/::*}::64 dev ${NETIFS[p3]}" \
+		0 "unicast connected - multipath onlink"
+
+	run_ip6_mpath 254 ${TEST_NET6[1]}::5 "onlink" \
+		"${RECGW6[1]} dev ${NETIFS[p1]}" \
+		"${RECGW6[2]} dev ${NETIFS[p3]}" \
+		0 "unicast recursive - multipath onlink"
+
+	run_ip6_mpath 254 ${TEST_NET6[1]}::6 "onlink" \
+		"::ffff:${TEST_NET4IN6[1]} dev ${NETIFS[p1]}" \
+		"::ffff:${TEST_NET4IN6[2]} dev ${NETIFS[p3]}" \
+		0 "v4-mapped - multipath onlink"
+
+	run_ip6_mpath 254 ${TEST_NET6[1]}::7 "" \
+		"${V6ADDRS[p1]/::*}::64 dev ${NETIFS[p1]} onlink" \
+		"${V6ADDRS[p3]/::*}::64 dev ${NETIFS[p3]} onlink" \
+		0 "unicast connected - multipath onlink both nexthops"
+
+	run_ip6_mpath 254 ${TEST_NET6[1]}::8 "" \
+		"${V6ADDRS[p1]/::*}::64 dev ${NETIFS[p1]} onlink" \
+		"${V6ADDRS[p3]/::*}::64 dev ${NETIFS[p3]}" \
+		0 "unicast connected - multipath onlink first only"
+
+	run_ip6_mpath 254 ${TEST_NET6[1]}::9 "" \
+		"${V6ADDRS[p1]/::*}::64 dev ${NETIFS[p1]}"        \
+		"${V6ADDRS[p3]/::*}::64 dev ${NETIFS[p3]} onlink" \
+		0 "unicast connected - multipath onlink second only"
+}
+
+invalid_onlink_ipv6()
+{
+	local lladdr
+
+	lladdr=$(get_linklocal ${NETIFS[p1]}) || return 1
+
+	run_ip6 254 ${TEST_NET6[1]}::11 ${V6ADDRS[p1]} ${NETIFS[p1]} 2 \
+		"Invalid gw - local unicast address"
+	run_ip6 254 ${TEST_NET6[1]}::12 ${lladdr} ${NETIFS[p1]} 2 \
+		"Invalid gw - local linklocal address"
+	run_ip6 254 ${TEST_NET6[1]}::12 ${MCAST6} ${NETIFS[p1]} 2 \
+		"Invalid gw - multicast address"
+
+	lladdr=$(get_linklocal ${NETIFS[p5]}) || return 1
+	run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::11 ${V6ADDRS[p5]} ${NETIFS[p5]} 2 \
+		"Invalid gw - local unicast address, VRF"
+	run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::12 ${lladdr} ${NETIFS[p5]} 2 \
+		"Invalid gw - local linklocal address, VRF"
+	run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::12 ${MCAST6} ${NETIFS[p5]} 2 \
+		"Invalid gw - multicast address, VRF"
+
+	run_ip6 254 ${TEST_NET6[1]}::101 ${V6ADDRS[p1]} "" 2 \
+		"No nexthop device given"
+
+	# default VRF validation is done against LOCAL table
+	# run_ip6 254 ${TEST_NET6[1]}::102 ${V6ADDRS[p3]/::[0-9]/::64} ${NETIFS[p1]} 2 \
+	#	"Gateway resolves to wrong nexthop device"
+
+	run_ip6 ${VRF_TABLE} ${TEST_NET6[2]}::103 ${V6ADDRS[p7]/::[0-9]/::64} ${NETIFS[p5]} 2 \
+		"Gateway resolves to wrong nexthop device - VRF"
+}
+
+run_onlink_tests()
+{
+	log_section "IPv4 onlink"
+	log_subsection "Valid onlink commands"
+	valid_onlink_ipv4
+	log_subsection "Invalid onlink commands"
+	invalid_onlink_ipv4
+
+	log_section "IPv6 onlink"
+	log_subsection "Valid onlink commands"
+	valid_onlink_ipv6
+	log_subsection "Invalid onlink commands"
+	invalid_onlink_ipv6
+}
+
+################################################################################
+# usage
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+
+        -p          Pause on fail
+        -v          verbose mode (show commands and output)
+EOF
+}
+
+################################################################################
+# main
+
+nsuccess=0
+nfail=0
+
+while getopts :t:pPhv o
+do
+	case $o in
+		p) PAUSE_ON_FAIL=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+cleanup
+setup
+run_onlink_tests
+cleanup
+
+if [ "$TESTS" != "none" ]; then
+	printf "\nTests passed: %3d\n" ${nsuccess}
+	printf "Tests failed: %3d\n"   ${nfail}
+fi
diff --git a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh
new file mode 100755
index 000000000..b52d59547
--- /dev/null
+++ b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh
@@ -0,0 +1,292 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Validate cached routes in fib{6}_nh that is used by multiple prefixes.
+# Validate a different # exception is generated in h0 for each remote host.
+#
+#               h1
+#            /
+#    h0 - r1 -  h2
+#            \
+#               h3
+#
+# routing in h0 to hN is done with nexthop objects.
+
+PAUSE_ON_FAIL=no
+VERBOSE=0
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+################################################################################
+# helpers
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+}
+
+run_cmd()
+{
+	local cmd="$*"
+	local out
+	local rc
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo "COMMAND: $cmd"
+	fi
+
+	out=$(eval $cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "$out"
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+################################################################################
+# config
+
+create_ns()
+{
+	local ns=${1}
+
+	ip netns del ${ns} 2>/dev/null
+
+	ip netns add ${ns}
+	ip -netns ${ns} addr add 127.0.0.1/8 dev lo
+	ip -netns ${ns} link set lo up
+
+	ip netns exec ${ns} sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
+	case ${ns} in
+	h*)
+		ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
+		;;
+	r*)
+		ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
+		ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
+		;;
+	esac
+}
+
+setup()
+{
+	local ns
+	local i
+
+	#set -e
+
+	for ns in h0 r1 h1 h2 h3
+	do
+		create_ns ${ns}
+	done
+
+	#
+	# create interconnects
+	#
+
+	for i in 0 1 2 3
+	do
+		ip -netns h${i} li add eth0 type veth peer name r1h${i}
+		ip -netns h${i} li set eth0 up
+		ip -netns h${i} li set r1h${i} netns r1 name eth${i} up
+
+		ip -netns h${i}    addr add dev eth0 172.16.10${i}.1/24
+		ip -netns h${i} -6 addr add dev eth0 2001:db8:10${i}::1/64
+		ip -netns r1    addr add dev eth${i} 172.16.10${i}.254/24
+		ip -netns r1 -6 addr add dev eth${i} 2001:db8:10${i}::64/64
+	done
+
+	ip -netns h0 nexthop add id 4 via 172.16.100.254 dev eth0
+	ip -netns h0 nexthop add id 6 via 2001:db8:100::64 dev eth0
+
+	# routing from h0 to h1-h3 and back
+	for i in 1 2 3
+	do
+		ip -netns h0    ro add 172.16.10${i}.0/24 nhid 4
+		ip -netns h${i} ro add 172.16.100.0/24 via 172.16.10${i}.254
+
+		ip -netns h0    -6 ro add 2001:db8:10${i}::/64 nhid 6
+		ip -netns h${i} -6 ro add 2001:db8:100::/64 via 2001:db8:10${i}::64
+	done
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo
+		echo "host 1 config"
+		ip -netns h0 li sh
+		ip -netns h0 ro sh
+		ip -netns h0 -6 ro sh
+	fi
+
+	#set +e
+}
+
+cleanup()
+{
+	for n in h0 r1 h1 h2 h3
+	do
+		ip netns del ${n} 2>/dev/null
+	done
+}
+
+change_mtu()
+{
+	local hostid=$1
+	local mtu=$2
+
+	run_cmd ip -netns h${hostid} li set eth0 mtu ${mtu}
+	run_cmd ip -netns r1 li set eth${hostid} mtu ${mtu}
+}
+
+################################################################################
+# validate exceptions
+
+validate_v4_exception()
+{
+	local i=$1
+	local mtu=$2
+	local ping_sz=$3
+	local dst="172.16.10${i}.1"
+	local h0=172.16.100.1
+	local r1=172.16.100.254
+	local rc
+
+	if [ ${ping_sz} != "0" ]; then
+		run_cmd ip netns exec h0 ping -s ${ping_sz} -c5 -w5 ${dst}
+	fi
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo "Route get"
+		ip -netns h0 ro get ${dst}
+		echo "Searching for:"
+		echo "    cache .* mtu ${mtu}"
+		echo
+	fi
+
+	ip -netns h0 ro get ${dst} | \
+	grep -q "cache .* mtu ${mtu}"
+	rc=$?
+
+	log_test $rc 0 "IPv4: host 0 to host ${i}, mtu ${mtu}"
+}
+
+validate_v6_exception()
+{
+	local i=$1
+	local mtu=$2
+	local ping_sz=$3
+	local dst="2001:db8:10${i}::1"
+	local h0=2001:db8:100::1
+	local r1=2001:db8:100::64
+	local rc
+
+	if [ ${ping_sz} != "0" ]; then
+		run_cmd ip netns exec h0 ${ping6} -s ${ping_sz} -c5 -w5 ${dst}
+	fi
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo "Route get"
+		ip -netns h0 -6 ro get ${dst}
+		echo "Searching for:"
+		echo "    ${dst}.* via ${r1} dev eth0 src ${h0} .* mtu ${mtu}"
+		echo
+	fi
+
+	ip -netns h0 -6 ro get ${dst} | \
+	grep -q "${dst}.* via ${r1} dev eth0 src ${h0} .* mtu ${mtu}"
+	rc=$?
+
+	log_test $rc 0 "IPv6: host 0 to host ${i}, mtu ${mtu}"
+}
+
+################################################################################
+# main
+
+while getopts :pv o
+do
+	case $o in
+		p) PAUSE_ON_FAIL=yes;;
+		v) VERBOSE=1;;
+	esac
+done
+
+cleanup
+setup
+sleep 2
+
+cpus=$(cat  /sys/devices/system/cpu/online)
+cpus="$(seq ${cpus/-/ })"
+ret=0
+for i in 1 2 3
+do
+	# generate a cached route per-cpu
+	for c in ${cpus}; do
+		run_cmd taskset -c ${c} ip netns exec h0 ping -c1 -w1 172.16.10${i}.1
+		[ $? -ne 0 ] && printf "\nERROR: ping to h${i} failed\n" && ret=1
+
+		run_cmd taskset -c ${c} ip netns exec h0 ${ping6} -c1 -w1 2001:db8:10${i}::1
+		[ $? -ne 0 ] && printf "\nERROR: ping6 to h${i} failed\n" && ret=1
+
+		[ $ret -ne 0 ] && break
+	done
+	[ $ret -ne 0 ] && break
+done
+
+if [ $ret -eq 0 ]; then
+	# generate different exceptions in h0 for h1, h2 and h3
+	change_mtu 1 1300
+	validate_v4_exception 1 1300 1350
+	validate_v6_exception 1 1300 1350
+	echo
+
+	change_mtu 2 1350
+	validate_v4_exception 2 1350 1400
+	validate_v6_exception 2 1350 1400
+	echo
+
+	change_mtu 3 1400
+	validate_v4_exception 3 1400 1450
+	validate_v6_exception 3 1400 1450
+	echo
+
+	validate_v4_exception 1 1300 0
+	validate_v6_exception 1 1300 0
+	echo
+
+	validate_v4_exception 2 1350 0
+	validate_v6_exception 2 1350 0
+	echo
+
+	validate_v4_exception 3 1400 0
+	validate_v6_exception 3 1400 0
+
+	# targeted deletes to trigger cleanup paths in kernel
+	ip -netns h0 ro del 172.16.102.0/24 nhid 4
+	ip -netns h0 -6 ro del 2001:db8:102::/64 nhid 6
+
+	ip -netns h0 nexthop del id 4
+	ip -netns h0 nexthop del id 6
+fi
+
+cleanup
diff --git a/tools/testing/selftests/net/fib_nexthops.sh b/tools/testing/selftests/net/fib_nexthops.sh
new file mode 100755
index 000000000..7ece4131d
--- /dev/null
+++ b/tools/testing/selftests/net/fib_nexthops.sh
@@ -0,0 +1,1696 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# ns: me               | ns: peer              | ns: remote
+#   2001:db8:91::1     |       2001:db8:91::2  |
+#   172.16.1.1         |       172.16.1.2      |
+#            veth1 <---|---> veth2             |
+#                      |              veth5 <--|--> veth6  172.16.101.1
+#            veth3 <---|---> veth4             |           2001:db8:101::1
+#   172.16.2.1         |       172.16.2.2      |
+#   2001:db8:92::1     |       2001:db8:92::2  |
+#
+# This test is for checking IPv4 and IPv6 FIB behavior with nexthop
+# objects. Device reference counts and network namespace cleanup tested
+# by use of network namespace for peer.
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# all tests in this script. Can be overridden with -t option
+IPV4_TESTS="ipv4_fcnal ipv4_grp_fcnal ipv4_withv6_fcnal ipv4_fcnal_runtime ipv4_large_grp ipv4_compat_mode ipv4_fdb_grp_fcnal ipv4_torture"
+IPV6_TESTS="ipv6_fcnal ipv6_grp_fcnal ipv6_fcnal_runtime ipv6_large_grp ipv6_compat_mode ipv6_fdb_grp_fcnal ipv6_torture"
+
+ALL_TESTS="basic ${IPV4_TESTS} ${IPV6_TESTS}"
+TESTS="${ALL_TESTS}"
+VERBOSE=0
+PAUSE_ON_FAIL=no
+PAUSE=no
+
+nsid=100
+
+################################################################################
+# utilities
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "$VERBOSE" = "1" ]; then
+			echo "    rc=$rc, expected $expected"
+		fi
+
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+		echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+
+	if [ "${PAUSE}" = "yes" ]; then
+		echo
+		echo "hit enter to continue, 'q' to quit"
+		read a
+		[ "$a" = "q" ] && exit 1
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+}
+
+run_cmd()
+{
+	local cmd="$1"
+	local out
+	local stderr="2>/dev/null"
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "COMMAND: $cmd\n"
+		stderr=
+	fi
+
+	out=$(eval $cmd $stderr)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+	fi
+
+	return $rc
+}
+
+get_linklocal()
+{
+	local dev=$1
+	local ns
+	local addr
+
+	[ -n "$2" ] && ns="-netns $2"
+	addr=$(ip $ns -6 -br addr show dev ${dev} | \
+	awk '{
+		for (i = 3; i <= NF; ++i) {
+			if ($i ~ /^fe80/)
+				print $i
+		}
+	}'
+	)
+	addr=${addr/\/*}
+
+	[ -z "$addr" ] && return 1
+
+	echo $addr
+
+	return 0
+}
+
+create_ns()
+{
+	local n=${1}
+
+	ip netns del ${n} 2>/dev/null
+
+	set -e
+	ip netns add ${n}
+	ip netns set ${n} $((nsid++))
+	ip -netns ${n} addr add 127.0.0.1/8 dev lo
+	ip -netns ${n} link set lo up
+
+	ip netns exec ${n} sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ${n} sysctl -qw net.ipv4.fib_multipath_use_neigh=1
+	ip netns exec ${n} sysctl -qw net.ipv4.conf.default.ignore_routes_with_linkdown=1
+	ip netns exec ${n} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+	ip netns exec ${n} sysctl -qw net.ipv6.conf.all.forwarding=1
+	ip netns exec ${n} sysctl -qw net.ipv6.conf.default.forwarding=1
+	ip netns exec ${n} sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1
+	ip netns exec ${n} sysctl -qw net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${n} sysctl -qw net.ipv6.conf.default.accept_dad=0
+
+	set +e
+}
+
+setup()
+{
+	cleanup
+
+	create_ns me
+	create_ns peer
+	create_ns remote
+
+	IP="ip -netns me"
+	BRIDGE="bridge -netns me"
+	set -e
+	$IP li add veth1 type veth peer name veth2
+	$IP li set veth1 up
+	$IP addr add 172.16.1.1/24 dev veth1
+	$IP -6 addr add 2001:db8:91::1/64 dev veth1 nodad
+
+	$IP li add veth3 type veth peer name veth4
+	$IP li set veth3 up
+	$IP addr add 172.16.2.1/24 dev veth3
+	$IP -6 addr add 2001:db8:92::1/64 dev veth3 nodad
+
+	$IP li set veth2 netns peer up
+	ip -netns peer addr add 172.16.1.2/24 dev veth2
+	ip -netns peer -6 addr add 2001:db8:91::2/64 dev veth2 nodad
+
+	$IP li set veth4 netns peer up
+	ip -netns peer addr add 172.16.2.2/24 dev veth4
+	ip -netns peer -6 addr add 2001:db8:92::2/64 dev veth4 nodad
+
+	ip -netns remote li add veth5 type veth peer name veth6
+	ip -netns remote li set veth5 up
+	ip -netns remote addr add dev veth5 172.16.101.1/24
+	ip -netns remote -6 addr add dev veth5 2001:db8:101::1/64 nodad
+	ip -netns remote ro add 172.16.0.0/22 via 172.16.101.2
+	ip -netns remote -6 ro add 2001:db8:90::/40 via 2001:db8:101::2
+
+	ip -netns remote li set veth6 netns peer up
+	ip -netns peer addr add dev veth6 172.16.101.2/24
+	ip -netns peer -6 addr add dev veth6 2001:db8:101::2/64 nodad
+	set +e
+}
+
+cleanup()
+{
+	local ns
+
+	for ns in me peer remote; do
+		ip netns del ${ns} 2>/dev/null
+	done
+}
+
+check_output()
+{
+	local out="$1"
+	local expected="$2"
+	local rc=0
+
+	[ "${out}" = "${expected}" ] && return 0
+
+	if [ -z "${out}" ]; then
+		if [ "$VERBOSE" = "1" ]; then
+			printf "\nNo entry found\n"
+			printf "Expected:\n"
+			printf "    ${expected}\n"
+		fi
+		return 1
+	fi
+
+	out=$(echo ${out})
+	if [ "${out}" != "${expected}" ]; then
+		rc=1
+		if [ "${VERBOSE}" = "1" ]; then
+			printf "    Unexpected entry. Have:\n"
+			printf "        ${out}\n"
+			printf "    Expected:\n"
+			printf "        ${expected}\n\n"
+		else
+			echo "      WARNING: Unexpected route entry"
+		fi
+	fi
+
+	return $rc
+}
+
+check_nexthop()
+{
+	local nharg="$1"
+	local expected="$2"
+	local out
+
+	out=$($IP nexthop ls ${nharg} 2>/dev/null)
+
+	check_output "${out}" "${expected}"
+}
+
+check_route()
+{
+	local pfx="$1"
+	local expected="$2"
+	local out
+
+	out=$($IP route ls match ${pfx} 2>/dev/null)
+
+	check_output "${out}" "${expected}"
+}
+
+check_route6()
+{
+	local pfx="$1"
+	local expected="$2"
+	local out
+
+	out=$($IP -6 route ls match ${pfx} 2>/dev/null | sed -e 's/pref medium//')
+
+	check_output "${out}" "${expected}"
+}
+
+check_large_grp()
+{
+	local ipv=$1
+	local ecmp=$2
+	local grpnum=100
+	local nhidstart=100
+	local grpidstart=1000
+	local iter=0
+	local nhidstr=""
+	local grpidstr=""
+	local grpstr=""
+	local ipstr=""
+
+	if [ $ipv -eq 4 ]; then
+		ipstr="172.16.1."
+	else
+		ipstr="2001:db8:91::"
+	fi
+
+	#
+	# Create $grpnum groups with specified $ecmp and dump them
+	#
+
+	# create nexthops with different gateways
+	iter=2
+	while [ $iter -le $(($ecmp + 1)) ]
+	do
+		nhidstr="$(($nhidstart + $iter))"
+		run_cmd "$IP nexthop add id $nhidstr via $ipstr$iter dev veth1"
+		check_nexthop "id $nhidstr" "id $nhidstr via $ipstr$iter dev veth1 scope link"
+
+		if [ $iter -le $ecmp ]; then
+			grpstr+="$nhidstr/"
+		else
+			grpstr+="$nhidstr"
+		fi
+		((iter++))
+	done
+
+	# create duplicate large ecmp groups
+	iter=0
+	while [ $iter -le $grpnum ]
+	do
+		grpidstr="$(($grpidstart + $iter))"
+		run_cmd "$IP nexthop add id $grpidstr group $grpstr"
+		check_nexthop "id $grpidstr" "id $grpidstr group $grpstr"
+		((iter++))
+	done
+
+	# dump large groups
+	run_cmd "$IP nexthop list"
+	log_test $? 0 "Dump large (x$ecmp) ecmp groups"
+}
+
+start_ip_monitor()
+{
+	local mtype=$1
+
+	# start the monitor in the background
+	tmpfile=`mktemp /var/run/nexthoptestXXX`
+	mpid=`($IP monitor $mtype > $tmpfile & echo $!) 2>/dev/null`
+	sleep 0.2
+	echo "$mpid $tmpfile"
+}
+
+stop_ip_monitor()
+{
+	local mpid=$1
+	local tmpfile=$2
+	local el=$3
+
+	# check the monitor results
+	kill $mpid
+	lines=`wc -l $tmpfile | cut "-d " -f1`
+	test $lines -eq $el
+	rc=$?
+	rm -rf $tmpfile
+
+	return $rc
+}
+
+check_nexthop_fdb_support()
+{
+	$IP nexthop help 2>&1 | grep -q fdb
+	if [ $? -ne 0 ]; then
+		echo "SKIP: iproute2 too old, missing fdb nexthop support"
+		return $ksft_skip
+	fi
+}
+
+ipv6_fdb_grp_fcnal()
+{
+	local rc
+
+	echo
+	echo "IPv6 fdb groups functional"
+	echo "--------------------------"
+
+	check_nexthop_fdb_support
+	if [ $? -eq $ksft_skip ]; then
+		return $ksft_skip
+	fi
+
+	# create group with multiple nexthops
+	run_cmd "$IP nexthop add id 61 via 2001:db8:91::2 fdb"
+	run_cmd "$IP nexthop add id 62 via 2001:db8:91::3 fdb"
+	run_cmd "$IP nexthop add id 102 group 61/62 fdb"
+	check_nexthop "id 102" "id 102 group 61/62 fdb"
+	log_test $? 0 "Fdb Nexthop group with multiple nexthops"
+
+	## get nexthop group
+	run_cmd "$IP nexthop get id 102"
+	check_nexthop "id 102" "id 102 group 61/62 fdb"
+	log_test $? 0 "Get Fdb nexthop group by id"
+
+	# fdb nexthop group can only contain fdb nexthops
+	run_cmd "$IP nexthop add id 63 via 2001:db8:91::4"
+	run_cmd "$IP nexthop add id 64 via 2001:db8:91::5"
+	run_cmd "$IP nexthop add id 103 group 63/64 fdb"
+	log_test $? 2 "Fdb Nexthop group with non-fdb nexthops"
+
+	# Non fdb nexthop group can not contain fdb nexthops
+	run_cmd "$IP nexthop add id 65 via 2001:db8:91::5 fdb"
+	run_cmd "$IP nexthop add id 66 via 2001:db8:91::6 fdb"
+	run_cmd "$IP nexthop add id 104 group 65/66"
+	log_test $? 2 "Non-Fdb Nexthop group with fdb nexthops"
+
+	# fdb nexthop cannot have blackhole
+	run_cmd "$IP nexthop add id 67 blackhole fdb"
+	log_test $? 2 "Fdb Nexthop with blackhole"
+
+	# fdb nexthop with oif
+	run_cmd "$IP nexthop add id 68 via 2001:db8:91::7 dev veth1 fdb"
+	log_test $? 2 "Fdb Nexthop with oif"
+
+	# fdb nexthop with onlink
+	run_cmd "$IP nexthop add id 68 via 2001:db8:91::7 onlink fdb"
+	log_test $? 2 "Fdb Nexthop with onlink"
+
+	# fdb nexthop with encap
+	run_cmd "$IP nexthop add id 69 encap mpls 101 via 2001:db8:91::8 dev veth1 fdb"
+	log_test $? 2 "Fdb Nexthop with encap"
+
+	run_cmd "$IP link add name vx10 type vxlan id 1010 local 2001:db8:91::9 remote 2001:db8:91::10 dstport 4789 nolearning noudpcsum tos inherit ttl 100"
+	run_cmd "$BRIDGE fdb add 02:02:00:00:00:13 dev vx10 nhid 102 self"
+	log_test $? 0 "Fdb mac add with nexthop group"
+
+	## fdb nexthops can only reference nexthop groups and not nexthops
+	run_cmd "$BRIDGE fdb add 02:02:00:00:00:14 dev vx10 nhid 61 self"
+	log_test $? 255 "Fdb mac add with nexthop"
+
+	run_cmd "$IP -6 ro add 2001:db8:101::1/128 nhid 66"
+	log_test $? 2 "Route add with fdb nexthop"
+
+	run_cmd "$IP -6 ro add 2001:db8:101::1/128 nhid 103"
+	log_test $? 2 "Route add with fdb nexthop group"
+
+	run_cmd "$IP nexthop del id 61"
+	run_cmd "$BRIDGE fdb get to 02:02:00:00:00:13 dev vx10 self"
+	log_test $? 0 "Fdb entry after deleting a single nexthop"
+
+	run_cmd "$IP nexthop del id 102"
+	log_test $? 0 "Fdb nexthop delete"
+
+	run_cmd "$BRIDGE fdb get to 02:02:00:00:00:13 dev vx10 self"
+	log_test $? 254 "Fdb entry after deleting a nexthop group"
+
+	$IP link del dev vx10
+}
+
+ipv4_fdb_grp_fcnal()
+{
+	local rc
+
+	echo
+	echo "IPv4 fdb groups functional"
+	echo "--------------------------"
+
+	check_nexthop_fdb_support
+	if [ $? -eq $ksft_skip ]; then
+		return $ksft_skip
+	fi
+
+	# create group with multiple nexthops
+	run_cmd "$IP nexthop add id 12 via 172.16.1.2 fdb"
+	run_cmd "$IP nexthop add id 13 via 172.16.1.3 fdb"
+	run_cmd "$IP nexthop add id 102 group 12/13 fdb"
+	check_nexthop "id 102" "id 102 group 12/13 fdb"
+	log_test $? 0 "Fdb Nexthop group with multiple nexthops"
+
+	# get nexthop group
+	run_cmd "$IP nexthop get id 102"
+	check_nexthop "id 102" "id 102 group 12/13 fdb"
+	log_test $? 0 "Get Fdb nexthop group by id"
+
+	# fdb nexthop group can only contain fdb nexthops
+	run_cmd "$IP nexthop add id 14 via 172.16.1.2"
+	run_cmd "$IP nexthop add id 15 via 172.16.1.3"
+	run_cmd "$IP nexthop add id 103 group 14/15 fdb"
+	log_test $? 2 "Fdb Nexthop group with non-fdb nexthops"
+
+	# Non fdb nexthop group can not contain fdb nexthops
+	run_cmd "$IP nexthop add id 16 via 172.16.1.2 fdb"
+	run_cmd "$IP nexthop add id 17 via 172.16.1.3 fdb"
+	run_cmd "$IP nexthop add id 104 group 14/15"
+	log_test $? 2 "Non-Fdb Nexthop group with fdb nexthops"
+
+	# fdb nexthop cannot have blackhole
+	run_cmd "$IP nexthop add id 18 blackhole fdb"
+	log_test $? 2 "Fdb Nexthop with blackhole"
+
+	# fdb nexthop with oif
+	run_cmd "$IP nexthop add id 16 via 172.16.1.2 dev veth1 fdb"
+	log_test $? 2 "Fdb Nexthop with oif"
+
+	# fdb nexthop with onlink
+	run_cmd "$IP nexthop add id 16 via 172.16.1.2 onlink fdb"
+	log_test $? 2 "Fdb Nexthop with onlink"
+
+	# fdb nexthop with encap
+	run_cmd "$IP nexthop add id 17 encap mpls 101 via 172.16.1.2 dev veth1 fdb"
+	log_test $? 2 "Fdb Nexthop with encap"
+
+	run_cmd "$IP link add name vx10 type vxlan id 1010 local 10.0.0.1 remote 10.0.0.2 dstport 4789 nolearning noudpcsum tos inherit ttl 100"
+	run_cmd "$BRIDGE fdb add 02:02:00:00:00:13 dev vx10 nhid 102 self"
+	log_test $? 0 "Fdb mac add with nexthop group"
+
+	# fdb nexthops can only reference nexthop groups and not nexthops
+	run_cmd "$BRIDGE fdb add 02:02:00:00:00:14 dev vx10 nhid 12 self"
+	log_test $? 255 "Fdb mac add with nexthop"
+
+	run_cmd "$IP ro add 172.16.0.0/22 nhid 15"
+	log_test $? 2 "Route add with fdb nexthop"
+
+	run_cmd "$IP ro add 172.16.0.0/22 nhid 103"
+	log_test $? 2 "Route add with fdb nexthop group"
+
+	run_cmd "$IP nexthop del id 12"
+	run_cmd "$BRIDGE fdb get to 02:02:00:00:00:13 dev vx10 self"
+	log_test $? 0 "Fdb entry after deleting a single nexthop"
+
+	run_cmd "$IP nexthop del id 102"
+	log_test $? 0 "Fdb nexthop delete"
+
+	run_cmd "$BRIDGE fdb get to 02:02:00:00:00:13 dev vx10 self"
+	log_test $? 254 "Fdb entry after deleting a nexthop group"
+
+	$IP link del dev vx10
+}
+
+################################################################################
+# basic operations (add, delete, replace) on nexthops and nexthop groups
+#
+# IPv6
+
+ipv6_fcnal()
+{
+	local rc
+
+	echo
+	echo "IPv6"
+	echo "----------------------"
+
+	run_cmd "$IP nexthop add id 52 via 2001:db8:91::2 dev veth1"
+	rc=$?
+	log_test $rc 0 "Create nexthop with id, gw, dev"
+	if [ $rc -ne 0 ]; then
+		echo "Basic IPv6 create fails; can not continue"
+		return 1
+	fi
+
+	run_cmd "$IP nexthop get id 52"
+	log_test $? 0 "Get nexthop by id"
+	check_nexthop "id 52" "id 52 via 2001:db8:91::2 dev veth1 scope link"
+
+	run_cmd "$IP nexthop del id 52"
+	log_test $? 0 "Delete nexthop by id"
+	check_nexthop "id 52" ""
+
+	#
+	# gw, device spec
+	#
+	# gw validation, no device - fails since dev required
+	run_cmd "$IP nexthop add id 52 via 2001:db8:92::3"
+	log_test $? 2 "Create nexthop - gw only"
+
+	# gw is not reachable throught given dev
+	run_cmd "$IP nexthop add id 53 via 2001:db8:3::3 dev veth1"
+	log_test $? 2 "Create nexthop - invalid gw+dev combination"
+
+	# onlink arg overrides gw+dev lookup
+	run_cmd "$IP nexthop add id 53 via 2001:db8:3::3 dev veth1 onlink"
+	log_test $? 0 "Create nexthop - gw+dev and onlink"
+
+	# admin down should delete nexthops
+	set -e
+	run_cmd "$IP -6 nexthop add id 55 via 2001:db8:91::3 dev veth1"
+	run_cmd "$IP nexthop add id 56 via 2001:db8:91::4 dev veth1"
+	run_cmd "$IP nexthop add id 57 via 2001:db8:91::5 dev veth1"
+	run_cmd "$IP li set dev veth1 down"
+	set +e
+	check_nexthop "dev veth1" ""
+	log_test $? 0 "Nexthops removed on admin down"
+}
+
+ipv6_grp_fcnal()
+{
+	local rc
+
+	echo
+	echo "IPv6 groups functional"
+	echo "----------------------"
+
+	# basic functionality: create a nexthop group, default weight
+	run_cmd "$IP nexthop add id 61 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 101 group 61"
+	log_test $? 0 "Create nexthop group with single nexthop"
+
+	# get nexthop group
+	run_cmd "$IP nexthop get id 101"
+	log_test $? 0 "Get nexthop group by id"
+	check_nexthop "id 101" "id 101 group 61"
+
+	# delete nexthop group
+	run_cmd "$IP nexthop del id 101"
+	log_test $? 0 "Delete nexthop group by id"
+	check_nexthop "id 101" ""
+
+	$IP nexthop flush >/dev/null 2>&1
+	check_nexthop "id 101" ""
+
+	#
+	# create group with multiple nexthops - mix of gw and dev only
+	#
+	run_cmd "$IP nexthop add id 62 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 63 via 2001:db8:91::3 dev veth1"
+	run_cmd "$IP nexthop add id 64 via 2001:db8:91::4 dev veth1"
+	run_cmd "$IP nexthop add id 65 dev veth1"
+	run_cmd "$IP nexthop add id 102 group 62/63/64/65"
+	log_test $? 0 "Nexthop group with multiple nexthops"
+	check_nexthop "id 102" "id 102 group 62/63/64/65"
+
+	# Delete nexthop in a group and group is updated
+	run_cmd "$IP nexthop del id 63"
+	check_nexthop "id 102" "id 102 group 62/64/65"
+	log_test $? 0 "Nexthop group updated when entry is deleted"
+
+	# create group with multiple weighted nexthops
+	run_cmd "$IP nexthop add id 63 via 2001:db8:91::3 dev veth1"
+	run_cmd "$IP nexthop add id 103 group 62/63,2/64,3/65,4"
+	log_test $? 0 "Nexthop group with weighted nexthops"
+	check_nexthop "id 103" "id 103 group 62/63,2/64,3/65,4"
+
+	# Delete nexthop in a weighted group and group is updated
+	run_cmd "$IP nexthop del id 63"
+	check_nexthop "id 103" "id 103 group 62/64,3/65,4"
+	log_test $? 0 "Weighted nexthop group updated when entry is deleted"
+
+	# admin down - nexthop is removed from group
+	run_cmd "$IP li set dev veth1 down"
+	check_nexthop "dev veth1" ""
+	log_test $? 0 "Nexthops in groups removed on admin down"
+
+	# expect groups to have been deleted as well
+	check_nexthop "" ""
+
+	run_cmd "$IP li set dev veth1 up"
+
+	$IP nexthop flush >/dev/null 2>&1
+
+	# group with nexthops using different devices
+	set -e
+	run_cmd "$IP nexthop add id 62 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 63 via 2001:db8:91::3 dev veth1"
+	run_cmd "$IP nexthop add id 64 via 2001:db8:91::4 dev veth1"
+	run_cmd "$IP nexthop add id 65 via 2001:db8:91::5 dev veth1"
+
+	run_cmd "$IP nexthop add id 72 via 2001:db8:92::2 dev veth3"
+	run_cmd "$IP nexthop add id 73 via 2001:db8:92::3 dev veth3"
+	run_cmd "$IP nexthop add id 74 via 2001:db8:92::4 dev veth3"
+	run_cmd "$IP nexthop add id 75 via 2001:db8:92::5 dev veth3"
+	set +e
+
+	# multiple groups with same nexthop
+	run_cmd "$IP nexthop add id 104 group 62"
+	run_cmd "$IP nexthop add id 105 group 62"
+	check_nexthop "group" "id 104 group 62 id 105 group 62"
+	log_test $? 0 "Multiple groups with same nexthop"
+
+	run_cmd "$IP nexthop flush groups"
+	[ $? -ne 0 ] && return 1
+
+	# on admin down of veth1, it should be removed from the group
+	run_cmd "$IP nexthop add id 105 group 62/63/72/73/64"
+	run_cmd "$IP li set veth1 down"
+	check_nexthop "id 105" "id 105 group 72/73"
+	log_test $? 0 "Nexthops in group removed on admin down - mixed group"
+
+	run_cmd "$IP nexthop add id 106 group 105/74"
+	log_test $? 2 "Nexthop group can not have a group as an entry"
+
+	# a group can have a blackhole entry only if it is the only
+	# nexthop in the group. Needed for atomic replace with an
+	# actual nexthop group
+	run_cmd "$IP -6 nexthop add id 31 blackhole"
+	run_cmd "$IP nexthop add id 107 group 31"
+	log_test $? 0 "Nexthop group with a blackhole entry"
+
+	run_cmd "$IP nexthop add id 108 group 31/24"
+	log_test $? 2 "Nexthop group can not have a blackhole and another nexthop"
+}
+
+ipv6_fcnal_runtime()
+{
+	local rc
+
+	echo
+	echo "IPv6 functional runtime"
+	echo "-----------------------"
+
+	#
+	# IPv6 - the basics
+	#
+	run_cmd "$IP nexthop add id 81 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP ro add 2001:db8:101::1/128 nhid 81"
+	log_test $? 0 "Route add"
+
+	run_cmd "$IP ro delete 2001:db8:101::1/128 nhid 81"
+	log_test $? 0 "Route delete"
+
+	run_cmd "$IP ro add 2001:db8:101::1/128 nhid 81"
+	run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+	log_test $? 0 "Ping with nexthop"
+
+	run_cmd "$IP nexthop add id 82 via 2001:db8:92::2 dev veth3"
+	run_cmd "$IP nexthop add id 122 group 81/82"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 122"
+	run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+	log_test $? 0 "Ping - multipath"
+
+	#
+	# IPv6 with blackhole nexthops
+	#
+	run_cmd "$IP -6 nexthop add id 83 blackhole"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 83"
+	run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+	log_test $? 2 "Ping - blackhole"
+
+	run_cmd "$IP nexthop replace id 83 via 2001:db8:91::2 dev veth1"
+	run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+	log_test $? 0 "Ping - blackhole replaced with gateway"
+
+	run_cmd "$IP -6 nexthop replace id 83 blackhole"
+	run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+	log_test $? 2 "Ping - gateway replaced by blackhole"
+
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 122"
+	run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+	if [ $? -eq 0 ]; then
+		run_cmd "$IP nexthop replace id 122 group 83"
+		run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+		log_test $? 2 "Ping - group with blackhole"
+
+		run_cmd "$IP nexthop replace id 122 group 81/82"
+		run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+		log_test $? 0 "Ping - group blackhole replaced with gateways"
+	else
+		log_test 2 0 "Ping - multipath failed"
+	fi
+
+	#
+	# device only and gw + dev only mix
+	#
+	run_cmd "$IP -6 nexthop add id 85 dev veth1"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 85"
+	log_test $? 0 "IPv6 route with device only nexthop"
+	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 85 dev veth1 metric 1024"
+
+	run_cmd "$IP nexthop add id 123 group 81/85"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 123"
+	log_test $? 0 "IPv6 multipath route with nexthop mix - dev only + gw"
+	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 123 metric 1024 nexthop via 2001:db8:91::2 dev veth1 weight 1 nexthop dev veth1 weight 1"
+
+	#
+	# IPv6 route with v4 nexthop - not allowed
+	#
+	run_cmd "$IP ro delete 2001:db8:101::1/128"
+	run_cmd "$IP nexthop add id 84 via 172.16.1.1 dev veth1"
+	run_cmd "$IP ro add 2001:db8:101::1/128 nhid 84"
+	log_test $? 2 "IPv6 route can not have a v4 gateway"
+
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 81"
+	run_cmd "$IP nexthop replace id 81 via 172.16.1.1 dev veth1"
+	log_test $? 2 "Nexthop replace - v6 route, v4 nexthop"
+
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 122"
+	run_cmd "$IP nexthop replace id 81 via 172.16.1.1 dev veth1"
+	log_test $? 2 "Nexthop replace of group entry - v6 route, v4 nexthop"
+
+	run_cmd "$IP nexthop add id 86 via 2001:db8:92::2 dev veth3"
+	run_cmd "$IP nexthop add id 87 via 172.16.1.1 dev veth1"
+	run_cmd "$IP nexthop add id 88 via 172.16.1.1 dev veth1"
+	run_cmd "$IP nexthop add id 124 group 86/87/88"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 124"
+	log_test $? 2 "IPv6 route can not have a group with v4 and v6 gateways"
+
+	run_cmd "$IP nexthop del id 88"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 124"
+	log_test $? 2 "IPv6 route can not have a group with v4 and v6 gateways"
+
+	run_cmd "$IP nexthop del id 87"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 124"
+	log_test $? 0 "IPv6 route using a group after removing v4 gateways"
+
+	run_cmd "$IP ro delete 2001:db8:101::1/128"
+	run_cmd "$IP nexthop add id 87 via 172.16.1.1 dev veth1"
+	run_cmd "$IP nexthop add id 88 via 172.16.1.1 dev veth1"
+	run_cmd "$IP nexthop replace id 124 group 86/87/88"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 124"
+	log_test $? 2 "IPv6 route can not have a group with v4 and v6 gateways"
+
+	run_cmd "$IP nexthop replace id 88 via 2001:db8:92::2 dev veth3"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 124"
+	log_test $? 2 "IPv6 route can not have a group with v4 and v6 gateways"
+
+	run_cmd "$IP nexthop replace id 87 via 2001:db8:92::2 dev veth3"
+	run_cmd "$IP ro replace 2001:db8:101::1/128 nhid 124"
+	log_test $? 0 "IPv6 route using a group after replacing v4 gateways"
+
+	$IP nexthop flush >/dev/null 2>&1
+
+	#
+	# weird IPv6 cases
+	#
+	run_cmd "$IP nexthop add id 86 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP ro add 2001:db8:101::1/128 nhid 81"
+
+	# rpfilter and default route
+	$IP nexthop flush >/dev/null 2>&1
+	run_cmd "ip netns exec me ip6tables -t mangle -I PREROUTING 1 -m rpfilter --invert -j DROP"
+	run_cmd "$IP nexthop add id 91 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 92 via 2001:db8:92::2 dev veth3"
+	run_cmd "$IP nexthop add id 93 group 91/92"
+	run_cmd "$IP -6 ro add default nhid 91"
+	run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+	log_test $? 0 "Nexthop with default route and rpfilter"
+	run_cmd "$IP -6 ro replace default nhid 93"
+	run_cmd "ip netns exec me ping -c1 -w1 2001:db8:101::1"
+	log_test $? 0 "Nexthop with multipath default route and rpfilter"
+
+	# TO-DO:
+	# existing route with old nexthop; append route with new nexthop
+	# existing route with old nexthop; replace route with new
+	# existing route with new nexthop; replace route with old
+	# route with src address and using nexthop - not allowed
+}
+
+ipv6_large_grp()
+{
+	local ecmp=32
+
+	echo
+	echo "IPv6 large groups (x$ecmp)"
+	echo "---------------------"
+
+	check_large_grp 6 $ecmp
+
+	$IP nexthop flush >/dev/null 2>&1
+}
+
+ipv6_del_add_loop1()
+{
+	while :; do
+		$IP nexthop del id 100
+		$IP nexthop add id 100 via 2001:db8:91::2 dev veth1
+	done >/dev/null 2>&1
+}
+
+ipv6_grp_replace_loop()
+{
+	while :; do
+		$IP nexthop replace id 102 group 100/101
+	done >/dev/null 2>&1
+}
+
+ipv6_torture()
+{
+	local pid1
+	local pid2
+	local pid3
+	local pid4
+	local pid5
+
+	echo
+	echo "IPv6 runtime torture"
+	echo "--------------------"
+	if [ ! -x "$(command -v mausezahn)" ]; then
+		echo "SKIP: Could not run test; need mausezahn tool"
+		return
+	fi
+
+	run_cmd "$IP nexthop add id 100 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 101 via 2001:db8:92::2 dev veth3"
+	run_cmd "$IP nexthop add id 102 group 100/101"
+	run_cmd "$IP route add 2001:db8:101::1 nhid 102"
+	run_cmd "$IP route add 2001:db8:101::2 nhid 102"
+
+	ipv6_del_add_loop1 &
+	pid1=$!
+	ipv6_grp_replace_loop &
+	pid2=$!
+	ip netns exec me ping -f 2001:db8:101::1 >/dev/null 2>&1 &
+	pid3=$!
+	ip netns exec me ping -f 2001:db8:101::2 >/dev/null 2>&1 &
+	pid4=$!
+	ip netns exec me mausezahn -6 veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" >/dev/null 2>&1 &
+	pid5=$!
+
+	sleep 300
+	kill -9 $pid1 $pid2 $pid3 $pid4 $pid5
+
+	# if we did not crash, success
+	log_test 0 0 "IPv6 torture test"
+}
+
+
+ipv4_fcnal()
+{
+	local rc
+
+	echo
+	echo "IPv4 functional"
+	echo "----------------------"
+
+	#
+	# basic IPv4 ops - add, get, delete
+	#
+	run_cmd "$IP nexthop add id 12 via 172.16.1.2 dev veth1"
+	rc=$?
+	log_test $rc 0 "Create nexthop with id, gw, dev"
+	if [ $rc -ne 0 ]; then
+		echo "Basic IPv4 create fails; can not continue"
+		return 1
+	fi
+
+	run_cmd "$IP nexthop get id 12"
+	log_test $? 0 "Get nexthop by id"
+	check_nexthop "id 12" "id 12 via 172.16.1.2 dev veth1 scope link"
+
+	run_cmd "$IP nexthop del id 12"
+	log_test $? 0 "Delete nexthop by id"
+	check_nexthop "id 52" ""
+
+	#
+	# gw, device spec
+	#
+	# gw validation, no device - fails since dev is required
+	run_cmd "$IP nexthop add id 12 via 172.16.2.3"
+	log_test $? 2 "Create nexthop - gw only"
+
+	# gw not reachable through given dev
+	run_cmd "$IP nexthop add id 13 via 172.16.3.2 dev veth1"
+	log_test $? 2 "Create nexthop - invalid gw+dev combination"
+
+	# onlink flag overrides gw+dev lookup
+	run_cmd "$IP nexthop add id 13 via 172.16.3.2 dev veth1 onlink"
+	log_test $? 0 "Create nexthop - gw+dev and onlink"
+
+	# admin down should delete nexthops
+	set -e
+	run_cmd "$IP nexthop add id 15 via 172.16.1.3 dev veth1"
+	run_cmd "$IP nexthop add id 16 via 172.16.1.4 dev veth1"
+	run_cmd "$IP nexthop add id 17 via 172.16.1.5 dev veth1"
+	run_cmd "$IP li set dev veth1 down"
+	set +e
+	check_nexthop "dev veth1" ""
+	log_test $? 0 "Nexthops removed on admin down"
+
+	# nexthop route delete warning: route add with nhid and delete
+	# using device
+	run_cmd "$IP li set dev veth1 up"
+	run_cmd "$IP nexthop add id 12 via 172.16.1.3 dev veth1"
+	out1=`dmesg | grep "WARNING:.*fib_nh_match.*" | wc -l`
+	run_cmd "$IP route add 172.16.101.1/32 nhid 12"
+	run_cmd "$IP route delete 172.16.101.1/32 dev veth1"
+	out2=`dmesg | grep "WARNING:.*fib_nh_match.*" | wc -l`
+	[ $out1 -eq $out2 ]
+	rc=$?
+	log_test $rc 0 "Delete nexthop route warning"
+	run_cmd "$IP route delete 172.16.101.1/32 nhid 12"
+	run_cmd "$IP nexthop del id 12"
+
+	run_cmd "$IP nexthop add id 21 via 172.16.1.6 dev veth1"
+	run_cmd "$IP ro add 172.16.101.0/24 nhid 21"
+	run_cmd "$IP ro del 172.16.101.0/24 nexthop via 172.16.1.7 dev veth1 nexthop via 172.16.1.8 dev veth1"
+	log_test $? 2 "Delete multipath route with only nh id based entry"
+
+	run_cmd "$IP nexthop add id 22 via 172.16.1.6 dev veth1"
+	run_cmd "$IP ro add 172.16.102.0/24 nhid 22"
+	run_cmd "$IP ro del 172.16.102.0/24 dev veth1"
+	log_test $? 2 "Delete route when specifying only nexthop device"
+
+	run_cmd "$IP ro del 172.16.102.0/24 via 172.16.1.6"
+	log_test $? 2 "Delete route when specifying only gateway"
+
+	run_cmd "$IP ro del 172.16.102.0/24"
+	log_test $? 0 "Delete route when not specifying nexthop attributes"
+}
+
+ipv4_grp_fcnal()
+{
+	local rc
+
+	echo
+	echo "IPv4 groups functional"
+	echo "----------------------"
+
+	# basic functionality: create a nexthop group, default weight
+	run_cmd "$IP nexthop add id 11 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 101 group 11"
+	log_test $? 0 "Create nexthop group with single nexthop"
+
+	# get nexthop group
+	run_cmd "$IP nexthop get id 101"
+	log_test $? 0 "Get nexthop group by id"
+	check_nexthop "id 101" "id 101 group 11"
+
+	# delete nexthop group
+	run_cmd "$IP nexthop del id 101"
+	log_test $? 0 "Delete nexthop group by id"
+	check_nexthop "id 101" ""
+
+	$IP nexthop flush >/dev/null 2>&1
+
+	#
+	# create group with multiple nexthops
+	run_cmd "$IP nexthop add id 12 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 13 via 172.16.1.3 dev veth1"
+	run_cmd "$IP nexthop add id 14 via 172.16.1.4 dev veth1"
+	run_cmd "$IP nexthop add id 15 via 172.16.1.5 dev veth1"
+	run_cmd "$IP nexthop add id 102 group 12/13/14/15"
+	log_test $? 0 "Nexthop group with multiple nexthops"
+	check_nexthop "id 102" "id 102 group 12/13/14/15"
+
+	# Delete nexthop in a group and group is updated
+	run_cmd "$IP nexthop del id 13"
+	check_nexthop "id 102" "id 102 group 12/14/15"
+	log_test $? 0 "Nexthop group updated when entry is deleted"
+
+	# create group with multiple weighted nexthops
+	run_cmd "$IP nexthop add id 13 via 172.16.1.3 dev veth1"
+	run_cmd "$IP nexthop add id 103 group 12/13,2/14,3/15,4"
+	log_test $? 0 "Nexthop group with weighted nexthops"
+	check_nexthop "id 103" "id 103 group 12/13,2/14,3/15,4"
+
+	# Delete nexthop in a weighted group and group is updated
+	run_cmd "$IP nexthop del id 13"
+	check_nexthop "id 103" "id 103 group 12/14,3/15,4"
+	log_test $? 0 "Weighted nexthop group updated when entry is deleted"
+
+	# admin down - nexthop is removed from group
+	run_cmd "$IP li set dev veth1 down"
+	check_nexthop "dev veth1" ""
+	log_test $? 0 "Nexthops in groups removed on admin down"
+
+	# expect groups to have been deleted as well
+	check_nexthop "" ""
+
+	run_cmd "$IP li set dev veth1 up"
+
+	$IP nexthop flush >/dev/null 2>&1
+
+	# group with nexthops using different devices
+	set -e
+	run_cmd "$IP nexthop add id 12 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 13 via 172.16.1.3 dev veth1"
+	run_cmd "$IP nexthop add id 14 via 172.16.1.4 dev veth1"
+	run_cmd "$IP nexthop add id 15 via 172.16.1.5 dev veth1"
+
+	run_cmd "$IP nexthop add id 22 via 172.16.2.2 dev veth3"
+	run_cmd "$IP nexthop add id 23 via 172.16.2.3 dev veth3"
+	run_cmd "$IP nexthop add id 24 via 172.16.2.4 dev veth3"
+	run_cmd "$IP nexthop add id 25 via 172.16.2.5 dev veth3"
+	set +e
+
+	# multiple groups with same nexthop
+	run_cmd "$IP nexthop add id 104 group 12"
+	run_cmd "$IP nexthop add id 105 group 12"
+	check_nexthop "group" "id 104 group 12 id 105 group 12"
+	log_test $? 0 "Multiple groups with same nexthop"
+
+	run_cmd "$IP nexthop flush groups"
+	[ $? -ne 0 ] && return 1
+
+	# on admin down of veth1, it should be removed from the group
+	run_cmd "$IP nexthop add id 105 group 12/13/22/23/14"
+	run_cmd "$IP li set veth1 down"
+	check_nexthop "id 105" "id 105 group 22/23"
+	log_test $? 0 "Nexthops in group removed on admin down - mixed group"
+
+	run_cmd "$IP nexthop add id 106 group 105/24"
+	log_test $? 2 "Nexthop group can not have a group as an entry"
+
+	# a group can have a blackhole entry only if it is the only
+	# nexthop in the group. Needed for atomic replace with an
+	# actual nexthop group
+	run_cmd "$IP nexthop add id 31 blackhole"
+	run_cmd "$IP nexthop add id 107 group 31"
+	log_test $? 0 "Nexthop group with a blackhole entry"
+
+	run_cmd "$IP nexthop add id 108 group 31/24"
+	log_test $? 2 "Nexthop group can not have a blackhole and another nexthop"
+}
+
+ipv4_withv6_fcnal()
+{
+	local lladdr
+
+	set -e
+	lladdr=$(get_linklocal veth2 peer)
+	run_cmd "$IP nexthop add id 11 via ${lladdr} dev veth1"
+	set +e
+	run_cmd "$IP ro add 172.16.101.1/32 nhid 11"
+	log_test $? 0 "IPv6 nexthop with IPv4 route"
+	check_route "172.16.101.1" "172.16.101.1 nhid 11 via inet6 ${lladdr} dev veth1"
+
+	set -e
+	run_cmd "$IP nexthop add id 12 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 101 group 11/12"
+	set +e
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 101"
+	log_test $? 0 "IPv6 nexthop with IPv4 route"
+
+	check_route "172.16.101.1" "172.16.101.1 nhid 101 nexthop via inet6 ${lladdr} dev veth1 weight 1 nexthop via 172.16.1.2 dev veth1 weight 1"
+
+	run_cmd "$IP ro replace 172.16.101.1/32 via inet6 ${lladdr} dev veth1"
+	log_test $? 0 "IPv4 route with IPv6 gateway"
+	check_route "172.16.101.1" "172.16.101.1 via inet6 ${lladdr} dev veth1"
+
+	run_cmd "$IP ro replace 172.16.101.1/32 via inet6 2001:db8:50::1 dev veth1"
+	log_test $? 2 "IPv4 route with invalid IPv6 gateway"
+}
+
+ipv4_fcnal_runtime()
+{
+	local lladdr
+	local rc
+
+	echo
+	echo "IPv4 functional runtime"
+	echo "-----------------------"
+
+	run_cmd "$IP nexthop add id 21 via 172.16.1.2 dev veth1"
+	run_cmd "$IP ro add 172.16.101.1/32 nhid 21"
+	log_test $? 0 "Route add"
+	check_route "172.16.101.1" "172.16.101.1 nhid 21 via 172.16.1.2 dev veth1"
+
+	run_cmd "$IP ro delete 172.16.101.1/32 nhid 21"
+	log_test $? 0 "Route delete"
+
+	#
+	# scope mismatch
+	#
+	run_cmd "$IP nexthop add id 22 via 172.16.1.2 dev veth1"
+	run_cmd "$IP ro add 172.16.101.1/32 nhid 22 scope host"
+	log_test $? 2 "Route add - scope conflict with nexthop"
+
+	run_cmd "$IP nexthop replace id 22 dev veth3"
+	run_cmd "$IP ro add 172.16.101.1/32 nhid 22 scope host"
+	run_cmd "$IP nexthop replace id 22 via 172.16.2.2 dev veth3"
+	log_test $? 2 "Nexthop replace with invalid scope for existing route"
+
+	#
+	# add route with nexthop and check traffic
+	#
+	run_cmd "$IP nexthop replace id 21 via 172.16.1.2 dev veth1"
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 21"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "Basic ping"
+
+	run_cmd "$IP nexthop replace id 22 via 172.16.2.2 dev veth3"
+	run_cmd "$IP nexthop add id 122 group 21/22"
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 122"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "Ping - multipath"
+
+	run_cmd "$IP ro delete 172.16.101.1/32 nhid 122"
+
+	#
+	# multiple default routes
+	# - tests fib_select_default
+	run_cmd "$IP nexthop add id 501 via 172.16.1.2 dev veth1"
+	run_cmd "$IP ro add default nhid 501"
+	run_cmd "$IP ro add default via 172.16.1.3 dev veth1 metric 20"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "Ping - multiple default routes, nh first"
+
+	# flip the order
+	run_cmd "$IP ro del default nhid 501"
+	run_cmd "$IP ro del default via 172.16.1.3 dev veth1 metric 20"
+	run_cmd "$IP ro add default via 172.16.1.2 dev veth1 metric 20"
+	run_cmd "$IP nexthop replace id 501 via 172.16.1.3 dev veth1"
+	run_cmd "$IP ro add default nhid 501 metric 20"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "Ping - multiple default routes, nh second"
+
+	run_cmd "$IP nexthop delete nhid 501"
+	run_cmd "$IP ro del default"
+
+	#
+	# IPv4 with blackhole nexthops
+	#
+	run_cmd "$IP nexthop add id 23 blackhole"
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 23"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 2 "Ping - blackhole"
+
+	run_cmd "$IP nexthop replace id 23 via 172.16.1.2 dev veth1"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "Ping - blackhole replaced with gateway"
+
+	run_cmd "$IP nexthop replace id 23 blackhole"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 2 "Ping - gateway replaced by blackhole"
+
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 122"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	if [ $? -eq 0 ]; then
+		run_cmd "$IP nexthop replace id 122 group 23"
+		run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+		log_test $? 2 "Ping - group with blackhole"
+
+		run_cmd "$IP nexthop replace id 122 group 21/22"
+		run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+		log_test $? 0 "Ping - group blackhole replaced with gateways"
+	else
+		log_test 2 0 "Ping - multipath failed"
+	fi
+
+	#
+	# device only and gw + dev only mix
+	#
+	run_cmd "$IP nexthop add id 85 dev veth1"
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 85"
+	log_test $? 0 "IPv4 route with device only nexthop"
+	check_route "172.16.101.1" "172.16.101.1 nhid 85 dev veth1"
+
+	run_cmd "$IP nexthop add id 123 group 21/85"
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 123"
+	log_test $? 0 "IPv4 multipath route with nexthop mix - dev only + gw"
+	check_route "172.16.101.1" "172.16.101.1 nhid 123 nexthop via 172.16.1.2 dev veth1 weight 1 nexthop dev veth1 weight 1"
+
+	#
+	# IPv4 with IPv6
+	#
+	set -e
+	lladdr=$(get_linklocal veth2 peer)
+	run_cmd "$IP nexthop add id 24 via ${lladdr} dev veth1"
+	set +e
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 24"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "IPv6 nexthop with IPv4 route"
+
+	$IP neigh sh | grep -q "${lladdr} dev veth1"
+	if [ $? -eq 1 ]; then
+		echo "    WARNING: Neigh entry missing for ${lladdr}"
+		$IP neigh sh | grep 'dev veth1'
+	fi
+
+	$IP neigh sh | grep -q "172.16.101.1 dev eth1"
+	if [ $? -eq 0 ]; then
+		echo "    WARNING: Neigh entry exists for 172.16.101.1"
+		$IP neigh sh | grep 'dev veth1'
+	fi
+
+	set -e
+	run_cmd "$IP nexthop add id 25 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 101 group 24/25"
+	set +e
+	run_cmd "$IP ro replace 172.16.101.1/32 nhid 101"
+	log_test $? 0 "IPv4 route with mixed v4-v6 multipath route"
+
+	check_route "172.16.101.1" "172.16.101.1 nhid 101 nexthop via inet6 ${lladdr} dev veth1 weight 1 nexthop via 172.16.1.2 dev veth1 weight 1"
+
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "IPv6 nexthop with IPv4 route"
+
+	run_cmd "$IP ro replace 172.16.101.1/32 via inet6 ${lladdr} dev veth1"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "IPv4 route with IPv6 gateway"
+
+	$IP neigh sh | grep -q "${lladdr} dev veth1"
+	if [ $? -eq 1 ]; then
+		echo "    WARNING: Neigh entry missing for ${lladdr}"
+		$IP neigh sh | grep 'dev veth1'
+	fi
+
+	$IP neigh sh | grep -q "172.16.101.1 dev eth1"
+	if [ $? -eq 0 ]; then
+		echo "    WARNING: Neigh entry exists for 172.16.101.1"
+		$IP neigh sh | grep 'dev veth1'
+	fi
+
+	run_cmd "$IP ro del 172.16.101.1/32 via inet6 ${lladdr} dev veth1"
+	run_cmd "$IP -4 ro add default via inet6 ${lladdr} dev veth1"
+	run_cmd "ip netns exec me ping -c1 -w1 172.16.101.1"
+	log_test $? 0 "IPv4 default route with IPv6 gateway"
+
+	#
+	# MPLS as an example of LWT encap
+	#
+	run_cmd "$IP nexthop add id 51 encap mpls 101 via 172.16.1.2 dev veth1"
+	log_test $? 0 "IPv4 route with MPLS encap"
+	check_nexthop "id 51" "id 51 encap mpls 101 via 172.16.1.2 dev veth1 scope link"
+	log_test $? 0 "IPv4 route with MPLS encap - check"
+
+	run_cmd "$IP nexthop add id 52 encap mpls 102 via inet6 2001:db8:91::2 dev veth1"
+	log_test $? 0 "IPv4 route with MPLS encap and v6 gateway"
+	check_nexthop "id 52" "id 52 encap mpls 102 via 2001:db8:91::2 dev veth1 scope link"
+	log_test $? 0 "IPv4 route with MPLS encap, v6 gw - check"
+}
+
+ipv4_large_grp()
+{
+	local ecmp=32
+
+	echo
+	echo "IPv4 large groups (x$ecmp)"
+	echo "---------------------"
+
+	check_large_grp 4 $ecmp
+
+	$IP nexthop flush >/dev/null 2>&1
+}
+
+sysctl_nexthop_compat_mode_check()
+{
+	local sysctlname="net.ipv4.nexthop_compat_mode"
+	local lprefix=$1
+
+	IPE="ip netns exec me"
+
+	$IPE sysctl -q $sysctlname 2>&1 >/dev/null
+	if [ $? -ne 0 ]; then
+		echo "SKIP: kernel lacks nexthop compat mode sysctl control"
+		return $ksft_skip
+	fi
+
+	out=$($IPE sysctl $sysctlname 2>/dev/null)
+	log_test $? 0 "$lprefix default nexthop compat mode check"
+	check_output "${out}" "$sysctlname = 1"
+}
+
+sysctl_nexthop_compat_mode_set()
+{
+	local sysctlname="net.ipv4.nexthop_compat_mode"
+	local mode=$1
+	local lprefix=$2
+
+	IPE="ip netns exec me"
+
+	out=$($IPE sysctl -w $sysctlname=$mode)
+	log_test $? 0 "$lprefix set compat mode - $mode"
+	check_output "${out}" "net.ipv4.nexthop_compat_mode = $mode"
+}
+
+ipv6_compat_mode()
+{
+	local rc
+
+	echo
+	echo "IPv6 nexthop api compat mode test"
+	echo "--------------------------------"
+
+	sysctl_nexthop_compat_mode_check "IPv6"
+	if [ $? -eq $ksft_skip ]; then
+		return $ksft_skip
+	fi
+
+	run_cmd "$IP nexthop add id 62 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 63 via 2001:db8:91::3 dev veth1"
+	run_cmd "$IP nexthop add id 122 group 62/63"
+	ipmout=$(start_ip_monitor route)
+
+	run_cmd "$IP -6 ro add 2001:db8:101::1/128 nhid 122"
+	# route add notification should contain expanded nexthops
+	stop_ip_monitor $ipmout 3
+	log_test $? 0 "IPv6 compat mode on - route add notification"
+
+	# route dump should contain expanded nexthops
+	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 122 metric 1024 nexthop via 2001:db8:91::2 dev veth1 weight 1 nexthop via 2001:db8:91::3 dev veth1 weight 1"
+	log_test $? 0 "IPv6 compat mode on - route dump"
+
+	# change in nexthop group should generate route notification
+	run_cmd "$IP nexthop add id 64 via 2001:db8:91::4 dev veth1"
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop replace id 122 group 62/64"
+	stop_ip_monitor $ipmout 3
+
+	log_test $? 0 "IPv6 compat mode on - nexthop change"
+
+	# set compat mode off
+	sysctl_nexthop_compat_mode_set 0 "IPv6"
+
+	run_cmd "$IP -6 ro del 2001:db8:101::1/128 nhid 122"
+
+	run_cmd "$IP nexthop add id 62 via 2001:db8:91::2 dev veth1"
+	run_cmd "$IP nexthop add id 63 via 2001:db8:91::3 dev veth1"
+	run_cmd "$IP nexthop add id 122 group 62/63"
+	ipmout=$(start_ip_monitor route)
+
+	run_cmd "$IP -6 ro add 2001:db8:101::1/128 nhid 122"
+	# route add notification should not contain expanded nexthops
+	stop_ip_monitor $ipmout 1
+	log_test $? 0 "IPv6 compat mode off - route add notification"
+
+	# route dump should not contain expanded nexthops
+	check_route6 "2001:db8:101::1" "2001:db8:101::1 nhid 122 metric 1024"
+	log_test $? 0 "IPv6 compat mode off - route dump"
+
+	# change in nexthop group should not generate route notification
+	run_cmd "$IP nexthop add id 64 via 2001:db8:91::4 dev veth1"
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop replace id 122 group 62/64"
+	stop_ip_monitor $ipmout 0
+	log_test $? 0 "IPv6 compat mode off - nexthop change"
+
+	# nexthop delete should not generate route notification
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop del id 122"
+	stop_ip_monitor $ipmout 0
+	log_test $? 0 "IPv6 compat mode off - nexthop delete"
+
+	# set compat mode back on
+	sysctl_nexthop_compat_mode_set 1 "IPv6"
+}
+
+ipv4_compat_mode()
+{
+	local rc
+
+	echo
+	echo "IPv4 nexthop api compat mode"
+	echo "----------------------------"
+
+	sysctl_nexthop_compat_mode_check "IPv4"
+	if [ $? -eq $ksft_skip ]; then
+		return $ksft_skip
+	fi
+
+	run_cmd "$IP nexthop add id 21 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 22 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 122 group 21/22"
+	ipmout=$(start_ip_monitor route)
+
+	run_cmd "$IP ro add 172.16.101.1/32 nhid 122"
+	stop_ip_monitor $ipmout 3
+
+	# route add notification should contain expanded nexthops
+	log_test $? 0 "IPv4 compat mode on - route add notification"
+
+	# route dump should contain expanded nexthops
+	check_route "172.16.101.1" "172.16.101.1 nhid 122 nexthop via 172.16.1.2 dev veth1 weight 1 nexthop via 172.16.1.2 dev veth1 weight 1"
+	log_test $? 0 "IPv4 compat mode on - route dump"
+
+	# change in nexthop group should generate route notification
+	run_cmd "$IP nexthop add id 23 via 172.16.1.3 dev veth1"
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop replace id 122 group 21/23"
+	stop_ip_monitor $ipmout 3
+	log_test $? 0 "IPv4 compat mode on - nexthop change"
+
+	sysctl_nexthop_compat_mode_set 0 "IPv4"
+
+	# cleanup
+	run_cmd "$IP ro del 172.16.101.1/32 nhid 122"
+
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP ro add 172.16.101.1/32 nhid 122"
+	stop_ip_monitor $ipmout 1
+	# route add notification should not contain expanded nexthops
+	log_test $? 0 "IPv4 compat mode off - route add notification"
+
+	# route dump should not contain expanded nexthops
+	check_route "172.16.101.1" "172.16.101.1 nhid 122"
+	log_test $? 0 "IPv4 compat mode off - route dump"
+
+	# change in nexthop group should not generate route notification
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop replace id 122 group 21/22"
+	stop_ip_monitor $ipmout 0
+	log_test $? 0 "IPv4 compat mode off - nexthop change"
+
+	# nexthop delete should not generate route notification
+	ipmout=$(start_ip_monitor route)
+	run_cmd "$IP nexthop del id 122"
+	stop_ip_monitor $ipmout 0
+	log_test $? 0 "IPv4 compat mode off - nexthop delete"
+
+	sysctl_nexthop_compat_mode_set 1 "IPv4"
+}
+
+ipv4_del_add_loop1()
+{
+	while :; do
+		$IP nexthop del id 100
+		$IP nexthop add id 100 via 172.16.1.2 dev veth1
+	done >/dev/null 2>&1
+}
+
+ipv4_grp_replace_loop()
+{
+	while :; do
+		$IP nexthop replace id 102 group 100/101
+	done >/dev/null 2>&1
+}
+
+ipv4_torture()
+{
+	local pid1
+	local pid2
+	local pid3
+	local pid4
+	local pid5
+
+	echo
+	echo "IPv4 runtime torture"
+	echo "--------------------"
+	if [ ! -x "$(command -v mausezahn)" ]; then
+		echo "SKIP: Could not run test; need mausezahn tool"
+		return
+	fi
+
+	run_cmd "$IP nexthop add id 100 via 172.16.1.2 dev veth1"
+	run_cmd "$IP nexthop add id 101 via 172.16.2.2 dev veth3"
+	run_cmd "$IP nexthop add id 102 group 100/101"
+	run_cmd "$IP route add 172.16.101.1 nhid 102"
+	run_cmd "$IP route add 172.16.101.2 nhid 102"
+
+	ipv4_del_add_loop1 &
+	pid1=$!
+	ipv4_grp_replace_loop &
+	pid2=$!
+	ip netns exec me ping -f 172.16.101.1 >/dev/null 2>&1 &
+	pid3=$!
+	ip netns exec me ping -f 172.16.101.2 >/dev/null 2>&1 &
+	pid4=$!
+	ip netns exec me mausezahn veth1 -B 172.16.101.2 -A 172.16.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" >/dev/null 2>&1 &
+	pid5=$!
+
+	sleep 300
+	kill -9 $pid1 $pid2 $pid3 $pid4 $pid5
+
+	# if we did not crash, success
+	log_test 0 0 "IPv4 torture test"
+}
+
+basic()
+{
+	echo
+	echo "Basic functional tests"
+	echo "----------------------"
+	run_cmd "$IP nexthop ls"
+	log_test $? 0 "List with nothing defined"
+
+	run_cmd "$IP nexthop get id 1"
+	log_test $? 2 "Nexthop get on non-existent id"
+
+	# attempt to create nh without a device or gw - fails
+	run_cmd "$IP nexthop add id 1"
+	log_test $? 2 "Nexthop with no device or gateway"
+
+	# attempt to create nh with down device - fails
+	$IP li set veth1 down
+	run_cmd "$IP nexthop add id 1 dev veth1"
+	log_test $? 2 "Nexthop with down device"
+
+	# create nh with linkdown device - fails
+	$IP li set veth1 up
+	ip -netns peer li set veth2 down
+	run_cmd "$IP nexthop add id 1 dev veth1"
+	log_test $? 2 "Nexthop with device that is linkdown"
+	ip -netns peer li set veth2 up
+
+	# device only
+	run_cmd "$IP nexthop add id 1 dev veth1"
+	log_test $? 0 "Nexthop with device only"
+
+	# create nh with duplicate id
+	run_cmd "$IP nexthop add id 1 dev veth3"
+	log_test $? 2 "Nexthop with duplicate id"
+
+	# blackhole nexthop
+	run_cmd "$IP nexthop add id 2 blackhole"
+	log_test $? 0 "Blackhole nexthop"
+
+	# blackhole nexthop can not have other specs
+	run_cmd "$IP nexthop replace id 2 blackhole dev veth1"
+	log_test $? 2 "Blackhole nexthop with other attributes"
+
+	#
+	# groups
+	#
+
+	run_cmd "$IP nexthop add id 101 group 1"
+	log_test $? 0 "Create group"
+
+	run_cmd "$IP nexthop add id 102 group 2"
+	log_test $? 0 "Create group with blackhole nexthop"
+
+	# multipath group can not have a blackhole as 1 path
+	run_cmd "$IP nexthop add id 103 group 1/2"
+	log_test $? 2 "Create multipath group where 1 path is a blackhole"
+
+	# multipath group can not have a member replaced by a blackhole
+	run_cmd "$IP nexthop replace id 2 dev veth3"
+	run_cmd "$IP nexthop replace id 102 group 1/2"
+	run_cmd "$IP nexthop replace id 2 blackhole"
+	log_test $? 2 "Multipath group can not have a member replaced by blackhole"
+
+	# attempt to create group with non-existent nexthop
+	run_cmd "$IP nexthop add id 103 group 12"
+	log_test $? 2 "Create group with non-existent nexthop"
+
+	# attempt to create group with same nexthop
+	run_cmd "$IP nexthop add id 103 group 1/1"
+	log_test $? 2 "Create group with same nexthop multiple times"
+
+	# replace nexthop with a group - fails
+	run_cmd "$IP nexthop replace id 2 group 1"
+	log_test $? 2 "Replace nexthop with nexthop group"
+
+	# replace nexthop group with a nexthop - fails
+	run_cmd "$IP nexthop replace id 101 dev veth1"
+	log_test $? 2 "Replace nexthop group with nexthop"
+
+	# nexthop group with other attributes fail
+	run_cmd "$IP nexthop add id 104 group 1 dev veth1"
+	log_test $? 2 "Nexthop group and device"
+
+	# Tests to ensure that flushing works as expected.
+	run_cmd "$IP nexthop add id 105 blackhole proto 99"
+	run_cmd "$IP nexthop add id 106 blackhole proto 100"
+	run_cmd "$IP nexthop add id 107 blackhole proto 99"
+	run_cmd "$IP nexthop flush proto 99"
+	check_nexthop "id 105" ""
+	check_nexthop "id 106" "id 106 blackhole proto 100"
+	check_nexthop "id 107" ""
+	run_cmd "$IP nexthop flush proto 100"
+	check_nexthop "id 106" ""
+
+	run_cmd "$IP nexthop flush proto 100"
+	log_test $? 0 "Test proto flush"
+
+	run_cmd "$IP nexthop add id 104 group 1 blackhole"
+	log_test $? 2 "Nexthop group and blackhole"
+
+	$IP nexthop flush >/dev/null 2>&1
+}
+
+################################################################################
+# usage
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+
+        -t <test>   Test(s) to run (default: all)
+                    (options: $ALL_TESTS)
+        -4          IPv4 tests only
+        -6          IPv6 tests only
+        -p          Pause on fail
+        -P          Pause after each test before cleanup
+        -v          verbose mode (show commands and output)
+
+    Runtime test
+	-n num	    Number of nexthops to target
+	-N    	    Use new style to install routes in DUT
+
+done
+EOF
+}
+
+################################################################################
+# main
+
+while getopts :t:pP46hv o
+do
+	case $o in
+		t) TESTS=$OPTARG;;
+		4) TESTS=${IPV4_TESTS};;
+		6) TESTS=${IPV6_TESTS};;
+		p) PAUSE_ON_FAIL=yes;;
+		P) PAUSE=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+# make sure we don't pause twice
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip help 2>&1 | grep -q nexthop
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing nexthop command"
+	exit $ksft_skip
+fi
+
+out=$(ip nexthop ls 2>&1 | grep -q "Operation not supported")
+if [ $? -eq 0 ]; then
+	echo "SKIP: kernel lacks nexthop support"
+	exit $ksft_skip
+fi
+
+for t in $TESTS
+do
+	case $t in
+	none) IP="ip -netns peer"; setup; exit 0;;
+	*) setup; $t; cleanup;;
+	esac
+done
+
+if [ "$TESTS" != "none" ]; then
+	printf "\nTests passed: %3d\n" ${nsuccess}
+	printf "Tests failed: %3d\n"   ${nfail}
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh
new file mode 100755
index 000000000..a93e6b690
--- /dev/null
+++ b/tools/testing/selftests/net/fib_rule_tests.sh
@@ -0,0 +1,260 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking IPv4 and IPv6 FIB rules API
+
+ret=0
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+IP="ip -netns testns"
+
+RTABLE=100
+GW_IP4=192.51.100.2
+SRC_IP=192.51.100.3
+GW_IP6=2001:db8:1::2
+SRC_IP6=2001:db8:1::3
+
+DEV_ADDR=192.51.100.1
+DEV_ADDR6=2001:db8:1::1
+DEV=dummy0
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		nsuccess=$((nsuccess+1))
+		printf "\n    TEST: %-50s  [ OK ]\n" "${msg}"
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "\n    TEST: %-50s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+log_section()
+{
+	echo
+	echo "######################################################################"
+	echo "TEST SECTION: $*"
+	echo "######################################################################"
+}
+
+setup()
+{
+	set -e
+	ip netns add testns
+	$IP link set dev lo up
+
+	$IP link add dummy0 type dummy
+	$IP link set dev dummy0 up
+	$IP address add $DEV_ADDR/24 dev dummy0
+	$IP -6 address add $DEV_ADDR6/64 dev dummy0
+
+	set +e
+}
+
+cleanup()
+{
+	$IP link del dev dummy0 &> /dev/null
+	ip netns del testns
+}
+
+fib_check_iproute_support()
+{
+	ip rule help 2>&1 | grep -q $1
+	if [ $? -ne 0 ]; then
+		echo "SKIP: iproute2 iprule too old, missing $1 match"
+		return 1
+	fi
+
+	ip route get help 2>&1 | grep -q $2
+	if [ $? -ne 0 ]; then
+		echo "SKIP: iproute2 get route too old, missing $2 match"
+		return 1
+	fi
+
+	return 0
+}
+
+fib_rule6_del()
+{
+	$IP -6 rule del $1
+	log_test $? 0 "rule6 del $1"
+}
+
+fib_rule6_del_by_pref()
+{
+	pref=$($IP -6 rule show | grep "$1 lookup $TABLE" | cut -d ":" -f 1)
+	$IP -6 rule del pref $pref
+}
+
+fib_rule6_test_match_n_redirect()
+{
+	local match="$1"
+	local getmatch="$2"
+
+	$IP -6 rule add $match table $RTABLE
+	$IP -6 route get $GW_IP6 $getmatch | grep -q "table $RTABLE"
+	log_test $? 0 "rule6 check: $1"
+
+	fib_rule6_del_by_pref "$match"
+	log_test $? 0 "rule6 del by pref: $match"
+}
+
+fib_rule6_test()
+{
+	# setup the fib rule redirect route
+	$IP -6 route add table $RTABLE default via $GW_IP6 dev $DEV onlink
+
+	match="oif $DEV"
+	fib_rule6_test_match_n_redirect "$match" "$match" "oif redirect to table"
+
+	match="from $SRC_IP6 iif $DEV"
+	fib_rule6_test_match_n_redirect "$match" "$match" "iif redirect to table"
+
+	match="tos 0x10"
+	fib_rule6_test_match_n_redirect "$match" "$match" "tos redirect to table"
+
+	match="fwmark 0x64"
+	getmatch="mark 0x64"
+	fib_rule6_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table"
+
+	fib_check_iproute_support "uidrange" "uid"
+	if [ $? -eq 0 ]; then
+		match="uidrange 100-100"
+		getmatch="uid 100"
+		fib_rule6_test_match_n_redirect "$match" "$getmatch" "uid redirect to table"
+	fi
+
+	fib_check_iproute_support "sport" "sport"
+	if [ $? -eq 0 ]; then
+		match="sport 666 dport 777"
+		fib_rule6_test_match_n_redirect "$match" "$match" "sport and dport redirect to table"
+	fi
+
+	fib_check_iproute_support "ipproto" "ipproto"
+	if [ $? -eq 0 ]; then
+		match="ipproto tcp"
+		fib_rule6_test_match_n_redirect "$match" "$match" "ipproto match"
+	fi
+
+	fib_check_iproute_support "ipproto" "ipproto"
+	if [ $? -eq 0 ]; then
+		match="ipproto ipv6-icmp"
+		fib_rule6_test_match_n_redirect "$match" "$match" "ipproto ipv6-icmp match"
+	fi
+}
+
+fib_rule4_del()
+{
+	$IP rule del $1
+	log_test $? 0 "del $1"
+}
+
+fib_rule4_del_by_pref()
+{
+	pref=$($IP rule show | grep "$1 lookup $TABLE" | cut -d ":" -f 1)
+	$IP rule del pref $pref
+}
+
+fib_rule4_test_match_n_redirect()
+{
+	local match="$1"
+	local getmatch="$2"
+
+	$IP rule add $match table $RTABLE
+	$IP route get $GW_IP4 $getmatch | grep -q "table $RTABLE"
+	log_test $? 0 "rule4 check: $1"
+
+	fib_rule4_del_by_pref "$match"
+	log_test $? 0 "rule4 del by pref: $match"
+}
+
+fib_rule4_test()
+{
+	# setup the fib rule redirect route
+	$IP route add table $RTABLE default via $GW_IP4 dev $DEV onlink
+
+	match="oif $DEV"
+	fib_rule4_test_match_n_redirect "$match" "$match" "oif redirect to table"
+
+	# need enable forwarding and disable rp_filter temporarily as all the
+	# addresses are in the same subnet and egress device == ingress device.
+	ip netns exec testns sysctl -w net.ipv4.ip_forward=1
+	ip netns exec testns sysctl -w net.ipv4.conf.$DEV.rp_filter=0
+	match="from $SRC_IP iif $DEV"
+	fib_rule4_test_match_n_redirect "$match" "$match" "iif redirect to table"
+	ip netns exec testns sysctl -w net.ipv4.ip_forward=0
+
+	match="tos 0x10"
+	fib_rule4_test_match_n_redirect "$match" "$match" "tos redirect to table"
+
+	match="fwmark 0x64"
+	getmatch="mark 0x64"
+	fib_rule4_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table"
+
+	fib_check_iproute_support "uidrange" "uid"
+	if [ $? -eq 0 ]; then
+		match="uidrange 100-100"
+		getmatch="uid 100"
+		fib_rule4_test_match_n_redirect "$match" "$getmatch" "uid redirect to table"
+	fi
+
+	fib_check_iproute_support "sport" "sport"
+	if [ $? -eq 0 ]; then
+		match="sport 666 dport 777"
+		fib_rule4_test_match_n_redirect "$match" "$match" "sport and dport redirect to table"
+	fi
+
+	fib_check_iproute_support "ipproto" "ipproto"
+	if [ $? -eq 0 ]; then
+		match="ipproto tcp"
+		fib_rule4_test_match_n_redirect "$match" "$match" "ipproto tcp match"
+	fi
+
+	fib_check_iproute_support "ipproto" "ipproto"
+	if [ $? -eq 0 ]; then
+		match="ipproto icmp"
+		fib_rule4_test_match_n_redirect "$match" "$match" "ipproto icmp match"
+	fi
+}
+
+run_fibrule_tests()
+{
+	log_section "IPv4 fib rule"
+	fib_rule4_test
+	log_section "IPv6 fib rule"
+	fib_rule6_test
+}
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit 0
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit 0
+fi
+
+# start clean
+cleanup &> /dev/null
+setup
+run_fibrule_tests
+cleanup
+
+if [ "$TESTS" != "none" ]; then
+	printf "\nTests passed: %3d\n" ${nsuccess}
+	printf "Tests failed: %3d\n"   ${nfail}
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
new file mode 100755
index 000000000..168101637
--- /dev/null
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -0,0 +1,1841 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking IPv4 and IPv6 FIB behavior in response to
+# different events.
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# all tests in this script. Can be overridden with -t option
+TESTS="unregister down carrier nexthop suppress ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics ipv4_route_v6_gw rp_filter ipv4_del_addr"
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+PAUSE=no
+IP="ip -netns ns1"
+NS_EXEC="ip netns exec ns1"
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "    TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "    TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+		echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+
+	if [ "${PAUSE}" = "yes" ]; then
+		echo
+		echo "hit enter to continue, 'q' to quit"
+		read a
+		[ "$a" = "q" ] && exit 1
+	fi
+}
+
+setup()
+{
+	set -e
+	ip netns add ns1
+	ip netns set ns1 auto
+	$IP link set dev lo up
+	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ns1 sysctl -qw net.ipv6.conf.all.forwarding=1
+
+	$IP link add dummy0 type dummy
+	$IP link set dev dummy0 up
+	$IP address add 198.51.100.1/24 dev dummy0
+	$IP -6 address add 2001:db8:1::1/64 dev dummy0
+	set +e
+
+}
+
+cleanup()
+{
+	$IP link del dev dummy0 &> /dev/null
+	ip netns del ns1 &> /dev/null
+	ip netns del ns2 &> /dev/null
+}
+
+get_linklocal()
+{
+	local dev=$1
+	local addr
+
+	addr=$($IP -6 -br addr show dev ${dev} | \
+	awk '{
+		for (i = 3; i <= NF; ++i) {
+			if ($i ~ /^fe80/)
+				print $i
+		}
+	}'
+	)
+	addr=${addr/\/*}
+
+	[ -z "$addr" ] && return 1
+
+	echo $addr
+
+	return 0
+}
+
+fib_unreg_unicast_test()
+{
+	echo
+	echo "Single path route test"
+
+	setup
+
+	echo "    Start point"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	set -e
+	$IP link del dev dummy0
+	set +e
+
+	echo "    Nexthop device deleted"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 2 "IPv4 fibmatch - no route"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 2 "IPv6 fibmatch - no route"
+
+	cleanup
+}
+
+fib_unreg_multipath_test()
+{
+
+	echo
+	echo "Multipath route test"
+
+	setup
+
+	set -e
+	$IP link add dummy1 type dummy
+	$IP link set dev dummy1 up
+	$IP address add 192.0.2.1/24 dev dummy1
+	$IP -6 address add 2001:db8:2::1/64 dev dummy1
+
+	$IP route add 203.0.113.0/24 \
+		nexthop via 198.51.100.2 dev dummy0 \
+		nexthop via 192.0.2.2 dev dummy1
+	$IP -6 route add 2001:db8:3::/64 \
+		nexthop via 2001:db8:1::2 dev dummy0 \
+		nexthop via 2001:db8:2::2 dev dummy1
+	set +e
+
+	echo "    Start point"
+	$IP route get fibmatch 203.0.113.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	set -e
+	$IP link del dev dummy0
+	set +e
+
+	echo "    One nexthop device deleted"
+	$IP route get fibmatch 203.0.113.1 &> /dev/null
+	log_test $? 2 "IPv4 - multipath route removed on delete"
+
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	# In IPv6 we do not flush the entire multipath route.
+	log_test $? 0 "IPv6 - multipath down to single path"
+
+	set -e
+	$IP link del dev dummy1
+	set +e
+
+	echo "    Second nexthop device deleted"
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	log_test $? 2 "IPv6 - no route"
+
+	cleanup
+}
+
+fib_unreg_test()
+{
+	fib_unreg_unicast_test
+	fib_unreg_multipath_test
+}
+
+fib_down_unicast_test()
+{
+	echo
+	echo "Single path, admin down"
+
+	setup
+
+	echo "    Start point"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	set -e
+	$IP link set dev dummy0 down
+	set +e
+
+	echo "    Route deleted on down"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 2 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 2 "IPv6 fibmatch"
+
+	cleanup
+}
+
+fib_down_multipath_test_do()
+{
+	local down_dev=$1
+	local up_dev=$2
+
+	$IP route get fibmatch 203.0.113.1 \
+		oif $down_dev &> /dev/null
+	log_test $? 2 "IPv4 fibmatch on down device"
+	$IP -6 route get fibmatch 2001:db8:3::1 \
+		oif $down_dev &> /dev/null
+	log_test $? 2 "IPv6 fibmatch on down device"
+
+	$IP route get fibmatch 203.0.113.1 \
+		oif $up_dev &> /dev/null
+	log_test $? 0 "IPv4 fibmatch on up device"
+	$IP -6 route get fibmatch 2001:db8:3::1 \
+		oif $up_dev &> /dev/null
+	log_test $? 0 "IPv6 fibmatch on up device"
+
+	$IP route get fibmatch 203.0.113.1 | \
+		grep $down_dev | grep -q "dead linkdown"
+	log_test $? 0 "IPv4 flags on down device"
+	$IP -6 route get fibmatch 2001:db8:3::1 | \
+		grep $down_dev | grep -q "dead linkdown"
+	log_test $? 0 "IPv6 flags on down device"
+
+	$IP route get fibmatch 203.0.113.1 | \
+		grep $up_dev | grep -q "dead linkdown"
+	log_test $? 1 "IPv4 flags on up device"
+	$IP -6 route get fibmatch 2001:db8:3::1 | \
+		grep $up_dev | grep -q "dead linkdown"
+	log_test $? 1 "IPv6 flags on up device"
+}
+
+fib_down_multipath_test()
+{
+	echo
+	echo "Admin down multipath"
+
+	setup
+
+	set -e
+	$IP link add dummy1 type dummy
+	$IP link set dev dummy1 up
+
+	$IP address add 192.0.2.1/24 dev dummy1
+	$IP -6 address add 2001:db8:2::1/64 dev dummy1
+
+	$IP route add 203.0.113.0/24 \
+		nexthop via 198.51.100.2 dev dummy0 \
+		nexthop via 192.0.2.2 dev dummy1
+	$IP -6 route add 2001:db8:3::/64 \
+		nexthop via 2001:db8:1::2 dev dummy0 \
+		nexthop via 2001:db8:2::2 dev dummy1
+	set +e
+
+	echo "    Verify start point"
+	$IP route get fibmatch 203.0.113.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	set -e
+	$IP link set dev dummy0 down
+	set +e
+
+	echo "    One device down, one up"
+	fib_down_multipath_test_do "dummy0" "dummy1"
+
+	set -e
+	$IP link set dev dummy0 up
+	$IP link set dev dummy1 down
+	set +e
+
+	echo "    Other device down and up"
+	fib_down_multipath_test_do "dummy1" "dummy0"
+
+	set -e
+	$IP link set dev dummy0 down
+	set +e
+
+	echo "    Both devices down"
+	$IP route get fibmatch 203.0.113.1 &> /dev/null
+	log_test $? 2 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	log_test $? 2 "IPv6 fibmatch"
+
+	$IP link del dev dummy1
+	cleanup
+}
+
+fib_down_test()
+{
+	fib_down_unicast_test
+	fib_down_multipath_test
+}
+
+# Local routes should not be affected when carrier changes.
+fib_carrier_local_test()
+{
+	echo
+	echo "Local carrier tests - single path"
+
+	setup
+
+	set -e
+	$IP link set dev dummy0 carrier on
+	set +e
+
+	echo "    Start point"
+	$IP route get fibmatch 198.51.100.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 198.51.100.1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv4 - no linkdown flag"
+	$IP -6 route get fibmatch 2001:db8:1::1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv6 - no linkdown flag"
+
+	set -e
+	$IP link set dev dummy0 carrier off
+	sleep 1
+	set +e
+
+	echo "    Carrier off on nexthop"
+	$IP route get fibmatch 198.51.100.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 198.51.100.1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv4 - linkdown flag set"
+	$IP -6 route get fibmatch 2001:db8:1::1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv6 - linkdown flag set"
+
+	set -e
+	$IP address add 192.0.2.1/24 dev dummy0
+	$IP -6 address add 2001:db8:2::1/64 dev dummy0
+	set +e
+
+	echo "    Route to local address with carrier down"
+	$IP route get fibmatch 192.0.2.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:2::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 192.0.2.1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv4 linkdown flag set"
+	$IP -6 route get fibmatch 2001:db8:2::1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv6 linkdown flag set"
+
+	cleanup
+}
+
+fib_carrier_unicast_test()
+{
+	ret=0
+
+	echo
+	echo "Single path route carrier test"
+
+	setup
+
+	set -e
+	$IP link set dev dummy0 carrier on
+	set +e
+
+	echo "    Start point"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 198.51.100.2 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv4 no linkdown flag"
+	$IP -6 route get fibmatch 2001:db8:1::2 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv6 no linkdown flag"
+
+	set -e
+	$IP link set dev dummy0 carrier off
+	sleep 1
+	set +e
+
+	echo "    Carrier down"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 198.51.100.2 | \
+		grep -q "linkdown"
+	log_test $? 0 "IPv4 linkdown flag set"
+	$IP -6 route get fibmatch 2001:db8:1::2 | \
+		grep -q "linkdown"
+	log_test $? 0 "IPv6 linkdown flag set"
+
+	set -e
+	$IP address add 192.0.2.1/24 dev dummy0
+	$IP -6 address add 2001:db8:2::1/64 dev dummy0
+	set +e
+
+	echo "    Second address added with carrier down"
+	$IP route get fibmatch 192.0.2.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:2::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 192.0.2.2 | \
+		grep -q "linkdown"
+	log_test $? 0 "IPv4 linkdown flag set"
+	$IP -6 route get fibmatch 2001:db8:2::2 | \
+		grep -q "linkdown"
+	log_test $? 0 "IPv6 linkdown flag set"
+
+	cleanup
+}
+
+fib_carrier_test()
+{
+	fib_carrier_local_test
+	fib_carrier_unicast_test
+}
+
+fib_rp_filter_test()
+{
+	echo
+	echo "IPv4 rp_filter tests"
+
+	setup
+
+	set -e
+	ip netns add ns2
+	ip netns set ns2 auto
+
+	ip -netns ns2 link set dev lo up
+
+	$IP link add name veth1 type veth peer name veth2
+	$IP link set dev veth2 netns ns2
+	$IP address add 192.0.2.1/24 dev veth1
+	ip -netns ns2 address add 192.0.2.1/24 dev veth2
+	$IP link set dev veth1 up
+	ip -netns ns2 link set dev veth2 up
+
+	$IP link set dev lo address 52:54:00:6a:c7:5e
+	$IP link set dev veth1 address 52:54:00:6a:c7:5e
+	ip -netns ns2 link set dev lo address 52:54:00:6a:c7:5e
+	ip -netns ns2 link set dev veth2 address 52:54:00:6a:c7:5e
+
+	# 1. (ns2) redirect lo's egress to veth2's egress
+	ip netns exec ns2 tc qdisc add dev lo parent root handle 1: fq_codel
+	ip netns exec ns2 tc filter add dev lo parent 1: protocol arp basic \
+		action mirred egress redirect dev veth2
+	ip netns exec ns2 tc filter add dev lo parent 1: protocol ip basic \
+		action mirred egress redirect dev veth2
+
+	# 2. (ns1) redirect veth1's ingress to lo's ingress
+	$NS_EXEC tc qdisc add dev veth1 ingress
+	$NS_EXEC tc filter add dev veth1 ingress protocol arp basic \
+		action mirred ingress redirect dev lo
+	$NS_EXEC tc filter add dev veth1 ingress protocol ip basic \
+		action mirred ingress redirect dev lo
+
+	# 3. (ns1) redirect lo's egress to veth1's egress
+	$NS_EXEC tc qdisc add dev lo parent root handle 1: fq_codel
+	$NS_EXEC tc filter add dev lo parent 1: protocol arp basic \
+		action mirred egress redirect dev veth1
+	$NS_EXEC tc filter add dev lo parent 1: protocol ip basic \
+		action mirred egress redirect dev veth1
+
+	# 4. (ns2) redirect veth2's ingress to lo's ingress
+	ip netns exec ns2 tc qdisc add dev veth2 ingress
+	ip netns exec ns2 tc filter add dev veth2 ingress protocol arp basic \
+		action mirred ingress redirect dev lo
+	ip netns exec ns2 tc filter add dev veth2 ingress protocol ip basic \
+		action mirred ingress redirect dev lo
+
+	$NS_EXEC sysctl -qw net.ipv4.conf.all.rp_filter=1
+	$NS_EXEC sysctl -qw net.ipv4.conf.all.accept_local=1
+	$NS_EXEC sysctl -qw net.ipv4.conf.all.route_localnet=1
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=1
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.accept_local=1
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.route_localnet=1
+	set +e
+
+	run_cmd "ip netns exec ns2 ping -w1 -c1 192.0.2.1"
+	log_test $? 0 "rp_filter passes local packets"
+
+	run_cmd "ip netns exec ns2 ping -w1 -c1 127.0.0.1"
+	log_test $? 0 "rp_filter passes loopback packets"
+
+	cleanup
+}
+
+################################################################################
+# Tests on nexthop spec
+
+# run 'ip route add' with given spec
+add_rt()
+{
+	local desc="$1"
+	local erc=$2
+	local vrf=$3
+	local pfx=$4
+	local gw=$5
+	local dev=$6
+	local cmd out rc
+
+	[ "$vrf" = "-" ] && vrf="default"
+	[ -n "$gw" ] && gw="via $gw"
+	[ -n "$dev" ] && dev="dev $dev"
+
+	cmd="$IP route add vrf $vrf $pfx $gw $dev"
+	if [ "$VERBOSE" = "1" ]; then
+		printf "\n    COMMAND: $cmd\n"
+	fi
+
+	out=$(eval $cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+	fi
+	log_test $rc $erc "$desc"
+}
+
+fib4_nexthop()
+{
+	echo
+	echo "IPv4 nexthop tests"
+
+	echo "<<< write me >>>"
+}
+
+fib6_nexthop()
+{
+	local lldummy=$(get_linklocal dummy0)
+	local llv1=$(get_linklocal dummy0)
+
+	if [ -z "$lldummy" ]; then
+		echo "Failed to get linklocal address for dummy0"
+		return 1
+	fi
+	if [ -z "$llv1" ]; then
+		echo "Failed to get linklocal address for veth1"
+		return 1
+	fi
+
+	echo
+	echo "IPv6 nexthop tests"
+
+	add_rt "Directly connected nexthop, unicast address" 0 \
+		- 2001:db8:101::/64 2001:db8:1::2
+	add_rt "Directly connected nexthop, unicast address with device" 0 \
+		- 2001:db8:102::/64 2001:db8:1::2 "dummy0"
+	add_rt "Gateway is linklocal address" 0 \
+		- 2001:db8:103::1/64 $llv1 "veth0"
+
+	# fails because LL address requires a device
+	add_rt "Gateway is linklocal address, no device" 2 \
+		- 2001:db8:104::1/64 $llv1
+
+	# local address can not be a gateway
+	add_rt "Gateway can not be local unicast address" 2 \
+		- 2001:db8:105::/64 2001:db8:1::1
+	add_rt "Gateway can not be local unicast address, with device" 2 \
+		- 2001:db8:106::/64 2001:db8:1::1 "dummy0"
+	add_rt "Gateway can not be a local linklocal address" 2 \
+		- 2001:db8:107::1/64 $lldummy "dummy0"
+
+	# VRF tests
+	add_rt "Gateway can be local address in a VRF" 0 \
+		- 2001:db8:108::/64 2001:db8:51::2
+	add_rt "Gateway can be local address in a VRF, with device" 0 \
+		- 2001:db8:109::/64 2001:db8:51::2 "veth0"
+	add_rt "Gateway can be local linklocal address in a VRF" 0 \
+		- 2001:db8:110::1/64 $llv1 "veth0"
+
+	add_rt "Redirect to VRF lookup" 0 \
+		- 2001:db8:111::/64 "" "red"
+
+	add_rt "VRF route, gateway can be local address in default VRF" 0 \
+		red 2001:db8:112::/64 2001:db8:51::1
+
+	# local address in same VRF fails
+	add_rt "VRF route, gateway can not be a local address" 2 \
+		red 2001:db8:113::1/64 2001:db8:2::1
+	add_rt "VRF route, gateway can not be a local addr with device" 2 \
+		red 2001:db8:114::1/64 2001:db8:2::1 "dummy1"
+}
+
+# Default VRF:
+#   dummy0 - 198.51.100.1/24 2001:db8:1::1/64
+#   veth0  - 192.0.2.1/24    2001:db8:51::1/64
+#
+# VRF red:
+#   dummy1 - 192.168.2.1/24 2001:db8:2::1/64
+#   veth1  - 192.0.2.2/24   2001:db8:51::2/64
+#
+#  [ dummy0   veth0 ]--[ veth1   dummy1 ]
+
+fib_nexthop_test()
+{
+	setup
+
+	set -e
+
+	$IP -4 rule add pref 32765 table local
+	$IP -4 rule del pref 0
+	$IP -6 rule add pref 32765 table local
+	$IP -6 rule del pref 0
+
+	$IP link add red type vrf table 1
+	$IP link set red up
+	$IP -4 route add vrf red unreachable default metric 4278198272
+	$IP -6 route add vrf red unreachable default metric 4278198272
+
+	$IP link add veth0 type veth peer name veth1
+	$IP link set dev veth0 up
+	$IP address add 192.0.2.1/24 dev veth0
+	$IP -6 address add 2001:db8:51::1/64 dev veth0
+
+	$IP link set dev veth1 vrf red up
+	$IP address add 192.0.2.2/24 dev veth1
+	$IP -6 address add 2001:db8:51::2/64 dev veth1
+
+	$IP link add dummy1 type dummy
+	$IP link set dev dummy1 vrf red up
+	$IP address add 192.168.2.1/24 dev dummy1
+	$IP -6 address add 2001:db8:2::1/64 dev dummy1
+	set +e
+
+	sleep 1
+	fib4_nexthop
+	fib6_nexthop
+
+	(
+	$IP link del dev dummy1
+	$IP link del veth0
+	$IP link del red
+	) 2>/dev/null
+	cleanup
+}
+
+fib_suppress_test()
+{
+	echo
+	echo "FIB rule with suppress_prefixlength"
+	setup
+
+	$IP link add dummy1 type dummy
+	$IP link set dummy1 up
+	$IP -6 route add default dev dummy1
+	$IP -6 rule add table main suppress_prefixlength 0
+	ping -f -c 1000 -W 1 1234::1 >/dev/null 2>&1
+	$IP -6 rule del table main suppress_prefixlength 0
+	$IP link del dummy1
+
+	# If we got here without crashing, we're good.
+	log_test 0 0 "FIB rule suppress test"
+
+	cleanup
+}
+
+################################################################################
+# Tests on route add and replace
+
+run_cmd()
+{
+	local cmd="$1"
+	local out
+	local stderr="2>/dev/null"
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "    COMMAND: $cmd\n"
+		stderr=
+	fi
+
+	out=$(eval $cmd $stderr)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+check_expected()
+{
+	local out="$1"
+	local expected="$2"
+	local rc=0
+
+	[ "${out}" = "${expected}" ] && return 0
+
+	if [ -z "${out}" ]; then
+		if [ "$VERBOSE" = "1" ]; then
+			printf "\nNo route entry found\n"
+			printf "Expected:\n"
+			printf "    ${expected}\n"
+		fi
+		return 1
+	fi
+
+	# tricky way to convert output to 1-line without ip's
+	# messy '\'; this drops all extra white space
+	out=$(echo ${out})
+	if [ "${out}" != "${expected}" ]; then
+		rc=1
+		if [ "${VERBOSE}" = "1" ]; then
+			printf "    Unexpected route entry. Have:\n"
+			printf "        ${out}\n"
+			printf "    Expected:\n"
+			printf "        ${expected}\n\n"
+		fi
+	fi
+
+	return $rc
+}
+
+# add route for a prefix, flushing any existing routes first
+# expected to be the first step of a test
+add_route6()
+{
+	local pfx="$1"
+	local nh="$2"
+	local out
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo
+		echo "    ##################################################"
+		echo
+	fi
+
+	run_cmd "$IP -6 ro flush ${pfx}"
+	[ $? -ne 0 ] && exit 1
+
+	out=$($IP -6 ro ls match ${pfx})
+	if [ -n "$out" ]; then
+		echo "Failed to flush routes for prefix used for tests."
+		exit 1
+	fi
+
+	run_cmd "$IP -6 ro add ${pfx} ${nh}"
+	if [ $? -ne 0 ]; then
+		echo "Failed to add initial route for test."
+		exit 1
+	fi
+}
+
+# add initial route - used in replace route tests
+add_initial_route6()
+{
+	add_route6 "2001:db8:104::/64" "$1"
+}
+
+check_route6()
+{
+	local pfx
+	local expected="$1"
+	local out
+	local rc=0
+
+	set -- $expected
+	pfx=$1
+
+	out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//')
+	check_expected "${out}" "${expected}"
+}
+
+route_cleanup()
+{
+	$IP li del red 2>/dev/null
+	$IP li del dummy1 2>/dev/null
+	$IP li del veth1 2>/dev/null
+	$IP li del veth3 2>/dev/null
+
+	cleanup &> /dev/null
+}
+
+route_setup()
+{
+	route_cleanup
+	setup
+
+	[ "${VERBOSE}" = "1" ] && set -x
+	set -e
+
+	ip netns add ns2
+	ip netns set ns2 auto
+	ip -netns ns2 link set dev lo up
+	ip netns exec ns2 sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ns2 sysctl -qw net.ipv6.conf.all.forwarding=1
+
+	$IP li add veth1 type veth peer name veth2
+	$IP li add veth3 type veth peer name veth4
+
+	$IP li set veth1 up
+	$IP li set veth3 up
+	$IP li set veth2 netns ns2 up
+	$IP li set veth4 netns ns2 up
+	ip -netns ns2 li add dummy1 type dummy
+	ip -netns ns2 li set dummy1 up
+
+	$IP -6 addr add 2001:db8:101::1/64 dev veth1 nodad
+	$IP -6 addr add 2001:db8:103::1/64 dev veth3 nodad
+	$IP addr add 172.16.101.1/24 dev veth1
+	$IP addr add 172.16.103.1/24 dev veth3
+
+	ip -netns ns2 -6 addr add 2001:db8:101::2/64 dev veth2 nodad
+	ip -netns ns2 -6 addr add 2001:db8:103::2/64 dev veth4 nodad
+	ip -netns ns2 -6 addr add 2001:db8:104::1/64 dev dummy1 nodad
+
+	ip -netns ns2 addr add 172.16.101.2/24 dev veth2
+	ip -netns ns2 addr add 172.16.103.2/24 dev veth4
+	ip -netns ns2 addr add 172.16.104.1/24 dev dummy1
+
+	set +e
+}
+
+# assumption is that basic add of a single path route works
+# otherwise just adding an address on an interface is broken
+ipv6_rt_add()
+{
+	local rc
+
+	echo
+	echo "IPv6 route add / append tests"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2"
+	log_test $? 2 "Attempt to add duplicate route - gw"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro add 2001:db8:104::/64 dev veth3"
+	log_test $? 2 "Attempt to add duplicate route - dev only"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64"
+	log_test $? 2 "Attempt to add duplicate route - reject route"
+
+	# route append with same prefix adds a new route
+	# - iproute2 sets NLM_F_CREATE | NLM_F_APPEND
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2"
+	check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Append nexthop to existing route - gw"
+
+	# insert mpath directly
+	add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Add multipath route"
+
+	add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro add 2001:db8:104::/64 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	log_test $? 2 "Attempt to add duplicate multipath route"
+
+	# insert of a second route without append but different metric
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2 metric 512"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::3 metric 256"
+		rc=$?
+	fi
+	log_test $rc 0 "Route add with different metrics"
+
+	run_cmd "$IP -6 ro del 2001:db8:104::/64 metric 512"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 via 2001:db8:103::3 dev veth3 metric 256 2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024"
+		rc=$?
+	fi
+	log_test $rc 0 "Route delete with metric"
+}
+
+ipv6_rt_replace_single()
+{
+	# single path with single path
+	#
+	add_initial_route6 "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:103::2"
+	check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024"
+	log_test $? 0 "Single path with single path"
+
+	# single path with multipath
+	#
+	add_initial_route6 "nexthop via 2001:db8:101::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::2"
+	check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Single path with multipath"
+
+	# single path with single path using MULTIPATH attribute
+	#
+	add_initial_route6 "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:103::2"
+	check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024"
+	log_test $? 0 "Single path with single path via multipath attribute"
+
+	# route replace fails - invalid nexthop
+	add_initial_route6 "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:104::2"
+	if [ $? -eq 0 ]; then
+		# previous command is expected to fail so if it returns 0
+		# that means the test failed.
+		log_test 0 1 "Invalid nexthop"
+	else
+		check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024"
+		log_test $? 0 "Invalid nexthop"
+	fi
+
+	# replace non-existent route
+	# - note use of change versus replace since ip adds NLM_F_CREATE
+	#   for replace
+	add_initial_route6 "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro change 2001:db8:105::/64 via 2001:db8:101::2"
+	log_test $? 2 "Single path - replace of non-existent route"
+}
+
+ipv6_rt_replace_mpath()
+{
+	# multipath with multipath
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3"
+	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::3 dev veth3 weight 1"
+	log_test $? 0 "Multipath with multipath"
+
+	# multipath with single
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:101::3"
+	check_route6  "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024"
+	log_test $? 0 "Multipath with single path"
+
+	# multipath with single
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3"
+	check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024"
+	log_test $? 0 "Multipath with single path via multipath attribute"
+
+	# multipath with dev-only
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 dev veth1"
+	check_route6 "2001:db8:104::/64 dev veth1 metric 1024"
+	log_test $? 0 "Multipath with dev-only"
+
+	# route replace fails - invalid nexthop 1
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3"
+	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Multipath - invalid first nexthop"
+
+	# route replace fails - invalid nexthop 2
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:113::3"
+	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Multipath - invalid second nexthop"
+
+	# multipath non-existent route
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro change 2001:db8:105::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3"
+	log_test $? 2 "Multipath - replace of non-existent route"
+}
+
+ipv6_rt_replace()
+{
+	echo
+	echo "IPv6 route replace tests"
+
+	ipv6_rt_replace_single
+	ipv6_rt_replace_mpath
+}
+
+ipv6_route_test()
+{
+	route_setup
+
+	ipv6_rt_add
+	ipv6_rt_replace
+
+	route_cleanup
+}
+
+ip_addr_metric_check()
+{
+	ip addr help 2>&1 | grep -q metric
+	if [ $? -ne 0 ]; then
+		echo "iproute2 command does not support metric for addresses. Skipping test"
+		return 1
+	fi
+
+	return 0
+}
+
+ipv6_addr_metric_test()
+{
+	local rc
+
+	echo
+	echo "IPv6 prefix route tests"
+
+	ip_addr_metric_check || return 1
+
+	setup
+
+	set -e
+	$IP li add dummy1 type dummy
+	$IP li add dummy2 type dummy
+	$IP li set dummy1 up
+	$IP li set dummy2 up
+
+	# default entry is metric 256
+	run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64"
+	run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 256 2001:db8:104::/64 dev dummy2 proto kernel metric 256"
+	log_test $? 0 "Default metric"
+
+	set -e
+	run_cmd "$IP -6 addr flush dev dummy1"
+	run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64 metric 257"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 256 2001:db8:104::/64 dev dummy1 proto kernel metric 257"
+	log_test $? 0 "User specified metric on first device"
+
+	set -e
+	run_cmd "$IP -6 addr flush dev dummy2"
+	run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64 metric 258"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 257 2001:db8:104::/64 dev dummy2 proto kernel metric 258"
+	log_test $? 0 "User specified metric on second device"
+
+	run_cmd "$IP -6 addr del dev dummy1 2001:db8:104::1/64 metric 257"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 258"
+		rc=$?
+	fi
+	log_test $rc 0 "Delete of address on first device"
+
+	run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::2/64 metric 259"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric of address"
+
+	# verify prefix route removed on down
+	run_cmd "ip netns exec ns1 sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1"
+	run_cmd "$IP li set dev dummy2 down"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		out=$($IP -6 ro ls match 2001:db8:104::/64)
+		check_expected "${out}" ""
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route removed on link down"
+
+	# verify prefix route re-inserted with assigned metric
+	run_cmd "$IP li set dev dummy2 up"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route with metric on link up"
+
+	# verify peer metric added correctly
+	set -e
+	run_cmd "$IP -6 addr flush dev dummy2"
+	run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::1 peer 2001:db8:104::2 metric 260"
+	set +e
+
+	check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 260"
+	log_test $? 0 "Set metric with peer route on local side"
+	check_route6 "2001:db8:104::2 dev dummy2 proto kernel metric 260"
+	log_test $? 0 "Set metric with peer route on peer side"
+
+	set -e
+	run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::1 peer 2001:db8:104::3 metric 261"
+	set +e
+
+	check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 261"
+	log_test $? 0 "Modify metric and peer address on local side"
+	check_route6 "2001:db8:104::3 dev dummy2 proto kernel metric 261"
+	log_test $? 0 "Modify metric and peer address on peer side"
+
+	$IP li del dummy1
+	$IP li del dummy2
+	cleanup
+}
+
+ipv6_route_metrics_test()
+{
+	local rc
+
+	echo
+	echo "IPv6 routes with metrics"
+
+	route_setup
+
+	#
+	# single path with metrics
+	#
+	run_cmd "$IP -6 ro add 2001:db8:111::/64 via 2001:db8:101::2 mtu 1400"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6  "2001:db8:111::/64 via 2001:db8:101::2 dev veth1 metric 1024 mtu 1400"
+		rc=$?
+	fi
+	log_test $rc 0 "Single path route with mtu metric"
+
+
+	#
+	# multipath via separate routes with metrics
+	#
+	run_cmd "$IP -6 ro add 2001:db8:112::/64 via 2001:db8:101::2 mtu 1400"
+	run_cmd "$IP -6 ro append 2001:db8:112::/64 via 2001:db8:103::2"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:112::/64 metric 1024 mtu 1400 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+		rc=$?
+	fi
+	log_test $rc 0 "Multipath route via 2 single routes with mtu metric on first"
+
+	# second route is coalesced to first to make a multipath route.
+	# MTU of the second path is hidden from display!
+	run_cmd "$IP -6 ro add 2001:db8:113::/64 via 2001:db8:101::2"
+	run_cmd "$IP -6 ro append 2001:db8:113::/64 via 2001:db8:103::2 mtu 1400"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:113::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+		rc=$?
+	fi
+	log_test $rc 0 "Multipath route via 2 single routes with mtu metric on 2nd"
+
+	run_cmd "$IP -6 ro del 2001:db8:113::/64 via 2001:db8:101::2"
+	if [ $? -eq 0 ]; then
+		check_route6 "2001:db8:113::/64 via 2001:db8:103::2 dev veth3 metric 1024 mtu 1400"
+		log_test $? 0 "    MTU of second leg"
+	fi
+
+	#
+	# multipath with metrics
+	#
+	run_cmd "$IP -6 ro add 2001:db8:115::/64 mtu 1400 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6  "2001:db8:115::/64 metric 1024 mtu 1400 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+		rc=$?
+	fi
+	log_test $rc 0 "Multipath route with mtu metric"
+
+	$IP -6 ro add 2001:db8:104::/64 via 2001:db8:101::2 mtu 1300
+	run_cmd "ip netns exec ns1 ${ping6} -w1 -c1 -s 1500 2001:db8:104::1"
+	log_test $? 0 "Using route with mtu metric"
+
+	run_cmd "$IP -6 ro add 2001:db8:114::/64 via  2001:db8:101::2  congctl lock foo"
+	log_test $? 2 "Invalid metric (fails metric_convert)"
+
+	route_cleanup
+}
+
+# add route for a prefix, flushing any existing routes first
+# expected to be the first step of a test
+add_route()
+{
+	local pfx="$1"
+	local nh="$2"
+	local out
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo
+		echo "    ##################################################"
+		echo
+	fi
+
+	run_cmd "$IP ro flush ${pfx}"
+	[ $? -ne 0 ] && exit 1
+
+	out=$($IP ro ls match ${pfx})
+	if [ -n "$out" ]; then
+		echo "Failed to flush routes for prefix used for tests."
+		exit 1
+	fi
+
+	run_cmd "$IP ro add ${pfx} ${nh}"
+	if [ $? -ne 0 ]; then
+		echo "Failed to add initial route for test."
+		exit 1
+	fi
+}
+
+# add initial route - used in replace route tests
+add_initial_route()
+{
+	add_route "172.16.104.0/24" "$1"
+}
+
+check_route()
+{
+	local pfx
+	local expected="$1"
+	local out
+
+	set -- $expected
+	pfx=$1
+	[ "${pfx}" = "unreachable" ] && pfx=$2
+
+	out=$($IP ro ls match ${pfx})
+	check_expected "${out}" "${expected}"
+}
+
+# assumption is that basic add of a single path route works
+# otherwise just adding an address on an interface is broken
+ipv4_rt_add()
+{
+	local rc
+
+	echo
+	echo "IPv4 route add / append tests"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2"
+	log_test $? 2 "Attempt to add duplicate route - gw"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro add 172.16.104.0/24 dev veth3"
+	log_test $? 2 "Attempt to add duplicate route - dev only"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro add unreachable 172.16.104.0/24"
+	log_test $? 2 "Attempt to add duplicate route - reject route"
+
+	# iproute2 prepend only sets NLM_F_CREATE
+	# - adds a new route; does NOT convert existing route to ECMP
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro prepend 172.16.104.0/24 via 172.16.103.2"
+	check_route "172.16.104.0/24 via 172.16.103.2 dev veth3 172.16.104.0/24 via 172.16.101.2 dev veth1"
+	log_test $? 0 "Add new nexthop for existing prefix"
+
+	# route append with same prefix adds a new route
+	# - iproute2 sets NLM_F_CREATE | NLM_F_APPEND
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2"
+	check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.2 dev veth3"
+	log_test $? 0 "Append nexthop to existing route - gw"
+
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro append 172.16.104.0/24 dev veth3"
+	check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 dev veth3 scope link"
+	log_test $? 0 "Append nexthop to existing route - dev only"
+
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro append unreachable 172.16.104.0/24"
+	check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 unreachable 172.16.104.0/24"
+	log_test $? 0 "Append nexthop to existing route - reject route"
+
+	run_cmd "$IP ro flush 172.16.104.0/24"
+	run_cmd "$IP ro add unreachable 172.16.104.0/24"
+	run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2"
+	check_route "unreachable 172.16.104.0/24 172.16.104.0/24 via 172.16.103.2 dev veth3"
+	log_test $? 0 "Append nexthop to existing reject route - gw"
+
+	run_cmd "$IP ro flush 172.16.104.0/24"
+	run_cmd "$IP ro add unreachable 172.16.104.0/24"
+	run_cmd "$IP ro append 172.16.104.0/24 dev veth3"
+	check_route "unreachable 172.16.104.0/24 172.16.104.0/24 dev veth3 scope link"
+	log_test $? 0 "Append nexthop to existing reject route - dev only"
+
+	# insert mpath directly
+	add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	check_route  "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	log_test $? 0 "add multipath route"
+
+	add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	log_test $? 2 "Attempt to add duplicate multipath route"
+
+	# insert of a second route without append but different metric
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2 metric 512"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.3 metric 256"
+		rc=$?
+	fi
+	log_test $rc 0 "Route add with different metrics"
+
+	run_cmd "$IP ro del 172.16.104.0/24 metric 512"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.3 dev veth3 metric 256"
+		rc=$?
+	fi
+	log_test $rc 0 "Route delete with metric"
+}
+
+ipv4_rt_replace_single()
+{
+	# single path with single path
+	#
+	add_initial_route "via 172.16.101.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.103.2"
+	check_route "172.16.104.0/24 via 172.16.103.2 dev veth3"
+	log_test $? 0 "Single path with single path"
+
+	# single path with multipath
+	#
+	add_initial_route "nexthop via 172.16.101.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.2"
+	check_route "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	log_test $? 0 "Single path with multipath"
+
+	# single path with reject
+	#
+	add_initial_route "nexthop via 172.16.101.2"
+	run_cmd "$IP ro replace unreachable 172.16.104.0/24"
+	check_route "unreachable 172.16.104.0/24"
+	log_test $? 0 "Single path with reject route"
+
+	# single path with single path using MULTIPATH attribute
+	#
+	add_initial_route "via 172.16.101.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.103.2"
+	check_route "172.16.104.0/24 via 172.16.103.2 dev veth3"
+	log_test $? 0 "Single path with single path via multipath attribute"
+
+	# route replace fails - invalid nexthop
+	add_initial_route "via 172.16.101.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 via 2001:db8:104::2"
+	if [ $? -eq 0 ]; then
+		# previous command is expected to fail so if it returns 0
+		# that means the test failed.
+		log_test 0 1 "Invalid nexthop"
+	else
+		check_route "172.16.104.0/24 via 172.16.101.2 dev veth1"
+		log_test $? 0 "Invalid nexthop"
+	fi
+
+	# replace non-existent route
+	# - note use of change versus replace since ip adds NLM_F_CREATE
+	#   for replace
+	add_initial_route "via 172.16.101.2"
+	run_cmd "$IP ro change 172.16.105.0/24 via 172.16.101.2"
+	log_test $? 2 "Single path - replace of non-existent route"
+}
+
+ipv4_rt_replace_mpath()
+{
+	# multipath with multipath
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3"
+	check_route  "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.3 dev veth3 weight 1"
+	log_test $? 0 "Multipath with multipath"
+
+	# multipath with single
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.101.3"
+	check_route  "172.16.104.0/24 via 172.16.101.3 dev veth1"
+	log_test $? 0 "Multipath with single path"
+
+	# multipath with single
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3"
+	check_route "172.16.104.0/24 via 172.16.101.3 dev veth1"
+	log_test $? 0 "Multipath with single path via multipath attribute"
+
+	# multipath with reject
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace unreachable 172.16.104.0/24"
+	check_route "unreachable 172.16.104.0/24"
+	log_test $? 0 "Multipath with reject route"
+
+	# route replace fails - invalid nexthop 1
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.111.3 nexthop via 172.16.103.3"
+	check_route  "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	log_test $? 0 "Multipath - invalid first nexthop"
+
+	# route replace fails - invalid nexthop 2
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.113.3"
+	check_route  "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	log_test $? 0 "Multipath - invalid second nexthop"
+
+	# multipath non-existent route
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro change 172.16.105.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3"
+	log_test $? 2 "Multipath - replace of non-existent route"
+}
+
+ipv4_rt_replace()
+{
+	echo
+	echo "IPv4 route replace tests"
+
+	ipv4_rt_replace_single
+	ipv4_rt_replace_mpath
+}
+
+# checks that cached input route on VRF port is deleted
+# when VRF is deleted
+ipv4_local_rt_cache()
+{
+	run_cmd "ip addr add 10.0.0.1/32 dev lo"
+	run_cmd "ip netns add test-ns"
+	run_cmd "ip link add veth-outside type veth peer name veth-inside"
+	run_cmd "ip link add vrf-100 type vrf table 1100"
+	run_cmd "ip link set veth-outside master vrf-100"
+	run_cmd "ip link set veth-inside netns test-ns"
+	run_cmd "ip link set veth-outside up"
+	run_cmd "ip link set vrf-100 up"
+	run_cmd "ip route add 10.1.1.1/32 dev veth-outside table 1100"
+	run_cmd "ip netns exec test-ns ip link set veth-inside up"
+	run_cmd "ip netns exec test-ns ip addr add 10.1.1.1/32 dev veth-inside"
+	run_cmd "ip netns exec test-ns ip route add 10.0.0.1/32 dev veth-inside"
+	run_cmd "ip netns exec test-ns ip route add default via 10.0.0.1"
+	run_cmd "ip netns exec test-ns ping 10.0.0.1 -c 1 -i 1"
+	run_cmd "ip link delete vrf-100"
+
+	# if we do not hang test is a success
+	log_test $? 0 "Cached route removed from VRF port device"
+}
+
+ipv4_route_test()
+{
+	route_setup
+
+	ipv4_rt_add
+	ipv4_rt_replace
+	ipv4_local_rt_cache
+
+	route_cleanup
+}
+
+ipv4_addr_metric_test()
+{
+	local rc
+
+	echo
+	echo "IPv4 prefix route tests"
+
+	ip_addr_metric_check || return 1
+
+	setup
+
+	set -e
+	$IP li add dummy1 type dummy
+	$IP li add dummy2 type dummy
+	$IP li set dummy1 up
+	$IP li set dummy2 up
+
+	# default entry is metric 256
+	run_cmd "$IP addr add dev dummy1 172.16.104.1/24"
+	run_cmd "$IP addr add dev dummy2 172.16.104.2/24"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2"
+	log_test $? 0 "Default metric"
+
+	set -e
+	run_cmd "$IP addr flush dev dummy1"
+	run_cmd "$IP addr add dev dummy1 172.16.104.1/24 metric 257"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257"
+	log_test $? 0 "User specified metric on first device"
+
+	set -e
+	run_cmd "$IP addr flush dev dummy2"
+	run_cmd "$IP addr add dev dummy2 172.16.104.2/24 metric 258"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258"
+	log_test $? 0 "User specified metric on second device"
+
+	run_cmd "$IP addr del dev dummy1 172.16.104.1/24 metric 257"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258"
+		rc=$?
+	fi
+	log_test $rc 0 "Delete of address on first device"
+
+	run_cmd "$IP addr change dev dummy2 172.16.104.2/24 metric 259"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric of address"
+
+	# verify prefix route removed on down
+	run_cmd "$IP li set dev dummy2 down"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		out=$($IP ro ls match 172.16.104.0/24)
+		check_expected "${out}" ""
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route removed on link down"
+
+	# verify prefix route re-inserted with assigned metric
+	run_cmd "$IP li set dev dummy2 up"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route with metric on link up"
+
+	# explicitly check for metric changes on edge scenarios
+	run_cmd "$IP addr flush dev dummy2"
+	run_cmd "$IP addr add dev dummy2 172.16.104.0/24 metric 259"
+	run_cmd "$IP addr change dev dummy2 172.16.104.0/24 metric 260"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.0 metric 260"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric of .0/24 address"
+
+	run_cmd "$IP addr flush dev dummy2"
+	run_cmd "$IP addr add dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 260"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.2 dev dummy2 proto kernel scope link src 172.16.104.1 metric 260"
+		rc=$?
+	fi
+	log_test $rc 0 "Set metric of address with peer route"
+
+	run_cmd "$IP addr change dev dummy2 172.16.104.1/32 peer 172.16.104.3 metric 261"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.3 dev dummy2 proto kernel scope link src 172.16.104.1 metric 261"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric and peer address for peer route"
+
+	$IP li del dummy1
+	$IP li del dummy2
+	cleanup
+}
+
+ipv4_route_metrics_test()
+{
+	local rc
+
+	echo
+	echo "IPv4 route add / append tests"
+
+	route_setup
+
+	run_cmd "$IP ro add 172.16.111.0/24 via 172.16.101.2 mtu 1400"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.111.0/24 via 172.16.101.2 dev veth1 mtu 1400"
+		rc=$?
+	fi
+	log_test $rc 0 "Single path route with mtu metric"
+
+
+	run_cmd "$IP ro add 172.16.112.0/24 mtu 1400 nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.112.0/24 mtu 1400 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+		rc=$?
+	fi
+	log_test $rc 0 "Multipath route with mtu metric"
+
+	$IP ro add 172.16.104.0/24 via 172.16.101.2 mtu 1300
+	run_cmd "ip netns exec ns1 ping -w1 -c1 -s 1500 172.16.104.1"
+	log_test $? 0 "Using route with mtu metric"
+
+	run_cmd "$IP ro add 172.16.111.0/24 via 172.16.101.2 congctl lock foo"
+	log_test $? 2 "Invalid metric (fails metric_convert)"
+
+	route_cleanup
+}
+
+ipv4_del_addr_test()
+{
+	echo
+	echo "IPv4 delete address route tests"
+
+	setup
+
+	set -e
+	$IP li add dummy1 type dummy
+	$IP li set dummy1 up
+	$IP li add dummy2 type dummy
+	$IP li set dummy2 up
+	$IP li add red type vrf table 1111
+	$IP li set red up
+	$IP ro add vrf red unreachable default
+	$IP li set dummy2 vrf red
+
+	$IP addr add dev dummy1 172.16.104.1/24
+	$IP addr add dev dummy1 172.16.104.11/24
+	$IP addr add dev dummy1 172.16.104.12/24
+	$IP addr add dev dummy1 172.16.104.13/24
+	$IP addr add dev dummy2 172.16.104.1/24
+	$IP addr add dev dummy2 172.16.104.11/24
+	$IP addr add dev dummy2 172.16.104.12/24
+	$IP route add 172.16.105.0/24 via 172.16.104.2 src 172.16.104.11
+	$IP route add 172.16.106.0/24 dev lo src 172.16.104.12
+	$IP route add table 0 172.16.107.0/24 via 172.16.104.2 src 172.16.104.13
+	$IP route add vrf red 172.16.105.0/24 via 172.16.104.2 src 172.16.104.11
+	$IP route add vrf red 172.16.106.0/24 dev lo src 172.16.104.12
+	set +e
+
+	# removing address from device in vrf should only remove route from vrf table
+	echo "    Regular FIB info"
+
+	$IP addr del dev dummy2 172.16.104.11/24
+	$IP ro ls vrf red | grep -q 172.16.105.0/24
+	log_test $? 1 "Route removed from VRF when source address deleted"
+
+	$IP ro ls | grep -q 172.16.105.0/24
+	log_test $? 0 "Route in default VRF not removed"
+
+	$IP addr add dev dummy2 172.16.104.11/24
+	$IP route add vrf red 172.16.105.0/24 via 172.16.104.2 src 172.16.104.11
+
+	$IP addr del dev dummy1 172.16.104.11/24
+	$IP ro ls | grep -q 172.16.105.0/24
+	log_test $? 1 "Route removed in default VRF when source address deleted"
+
+	$IP ro ls vrf red | grep -q 172.16.105.0/24
+	log_test $? 0 "Route in VRF is not removed by address delete"
+
+	# removing address from device in vrf should only remove route from vrf
+	# table even when the associated fib info only differs in table ID
+	echo "    Identical FIB info with different table ID"
+
+	$IP addr del dev dummy2 172.16.104.12/24
+	$IP ro ls vrf red | grep -q 172.16.106.0/24
+	log_test $? 1 "Route removed from VRF when source address deleted"
+
+	$IP ro ls | grep -q 172.16.106.0/24
+	log_test $? 0 "Route in default VRF not removed"
+
+	$IP addr add dev dummy2 172.16.104.12/24
+	$IP route add vrf red 172.16.106.0/24 dev lo src 172.16.104.12
+
+	$IP addr del dev dummy1 172.16.104.12/24
+	$IP ro ls | grep -q 172.16.106.0/24
+	log_test $? 1 "Route removed in default VRF when source address deleted"
+
+	$IP ro ls vrf red | grep -q 172.16.106.0/24
+	log_test $? 0 "Route in VRF is not removed by address delete"
+
+	# removing address from device in default vrf should remove route from
+	# the default vrf even when route was inserted with a table ID of 0.
+	echo "    Table ID 0"
+
+	$IP addr del dev dummy1 172.16.104.13/24
+	$IP ro ls | grep -q 172.16.107.0/24
+	log_test $? 1 "Route removed in default VRF when source address deleted"
+
+	$IP li del dummy1
+	$IP li del dummy2
+	cleanup
+}
+
+
+ipv4_route_v6_gw_test()
+{
+	local rc
+
+	echo
+	echo "IPv4 route with IPv6 gateway tests"
+
+	route_setup
+	sleep 2
+
+	#
+	# single path route
+	#
+	run_cmd "$IP ro add 172.16.104.0/24 via inet6 2001:db8:101::2"
+	rc=$?
+	log_test $rc 0 "Single path route with IPv6 gateway"
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 via inet6 2001:db8:101::2 dev veth1"
+	fi
+
+	run_cmd "ip netns exec ns1 ping -w1 -c1 172.16.104.1"
+	log_test $rc 0 "Single path route with IPv6 gateway - ping"
+
+	run_cmd "$IP ro del 172.16.104.0/24 via inet6 2001:db8:101::2"
+	rc=$?
+	log_test $rc 0 "Single path route delete"
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.112.0/24"
+	fi
+
+	#
+	# multipath - v6 then v4
+	#
+	run_cmd "$IP ro add 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3"
+	rc=$?
+	log_test $rc 0 "Multipath route add - v6 nexthop then v4"
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	fi
+
+	run_cmd "$IP ro del 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1"
+	log_test $? 2 "    Multipath route delete - nexthops in wrong order"
+
+	run_cmd "$IP ro del 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3"
+	log_test $? 0 "    Multipath route delete exact match"
+
+	#
+	# multipath - v4 then v6
+	#
+	run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1"
+	rc=$?
+	log_test $rc 0 "Multipath route add - v4 nexthop then v6"
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 weight 1 nexthop via inet6 2001:db8:101::2 dev veth1 weight 1"
+	fi
+
+	run_cmd "$IP ro del 172.16.104.0/24 nexthop via inet6 2001:db8:101::2 dev veth1 nexthop via 172.16.103.2 dev veth3"
+	log_test $? 2 "    Multipath route delete - nexthops in wrong order"
+
+	run_cmd "$IP ro del 172.16.104.0/24 nexthop via 172.16.103.2 dev veth3 nexthop via inet6 2001:db8:101::2 dev veth1"
+	log_test $? 0 "    Multipath route delete exact match"
+
+	route_cleanup
+}
+
+################################################################################
+# usage
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+
+        -t <test>   Test(s) to run (default: all)
+                    (options: $TESTS)
+        -p          Pause on fail
+        -P          Pause after each test before cleanup
+        -v          verbose mode (show commands and output)
+EOF
+}
+
+################################################################################
+# main
+
+trap cleanup EXIT
+
+while getopts :t:pPhv o
+do
+	case $o in
+		t) TESTS=$OPTARG;;
+		p) PAUSE_ON_FAIL=yes;;
+		P) PAUSE=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+PEER_CMD="ip netns exec ${PEER_NS}"
+
+# make sure we don't pause twice
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip route help 2>&1 | grep -q fibmatch
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing fibmatch"
+	exit $ksft_skip
+fi
+
+# start clean
+cleanup &> /dev/null
+
+for t in $TESTS
+do
+	case $t in
+	fib_unreg_test|unregister)	fib_unreg_test;;
+	fib_down_test|down)		fib_down_test;;
+	fib_carrier_test|carrier)	fib_carrier_test;;
+	fib_rp_filter_test|rp_filter)	fib_rp_filter_test;;
+	fib_nexthop_test|nexthop)	fib_nexthop_test;;
+	fib_suppress_test|suppress)	fib_suppress_test;;
+	ipv6_route_test|ipv6_rt)	ipv6_route_test;;
+	ipv4_route_test|ipv4_rt)	ipv4_route_test;;
+	ipv6_addr_metric)		ipv6_addr_metric_test;;
+	ipv4_addr_metric)		ipv4_addr_metric_test;;
+	ipv4_del_addr)			ipv4_del_addr_test;;
+	ipv6_route_metrics)		ipv6_route_metrics_test;;
+	ipv4_route_metrics)		ipv4_route_metrics_test;;
+	ipv4_route_v6_gw)		ipv4_route_v6_gw_test;;
+
+	help) echo "Test names: $TESTS"; exit 0;;
+	esac
+done
+
+if [ "$TESTS" != "none" ]; then
+	printf "\nTests passed: %3d\n" ${nsuccess}
+	printf "Tests failed: %3d\n"   ${nfail}
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/net/fin_ack_lat.c b/tools/testing/selftests/net/fin_ack_lat.c
new file mode 100644
index 000000000..70187494b
--- /dev/null
+++ b/tools/testing/selftests/net/fin_ack_lat.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <netinet/in.h>
+#include <netinet/tcp.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/socket.h>
+#include <sys/time.h>
+#include <unistd.h>
+
+static int child_pid;
+
+static unsigned long timediff(struct timeval s, struct timeval e)
+{
+	unsigned long s_us, e_us;
+
+	s_us = s.tv_sec * 1000000 + s.tv_usec;
+	e_us = e.tv_sec * 1000000 + e.tv_usec;
+	if (s_us > e_us)
+		return 0;
+	return e_us - s_us;
+}
+
+static void client(int port)
+{
+	int sock = 0;
+	struct sockaddr_in addr, laddr;
+	socklen_t len = sizeof(laddr);
+	struct linger sl;
+	int flag = 1;
+	int buffer;
+	struct timeval start, end;
+	unsigned long lat, sum_lat = 0, nr_lat = 0;
+
+	while (1) {
+		gettimeofday(&start, NULL);
+
+		sock = socket(AF_INET, SOCK_STREAM, 0);
+		if (sock < 0)
+			error(-1, errno, "socket creation");
+
+		sl.l_onoff = 1;
+		sl.l_linger = 0;
+		if (setsockopt(sock, SOL_SOCKET, SO_LINGER, &sl, sizeof(sl)))
+			error(-1, errno, "setsockopt(linger)");
+
+		if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY,
+					&flag, sizeof(flag)))
+			error(-1, errno, "setsockopt(nodelay)");
+
+		addr.sin_family = AF_INET;
+		addr.sin_port = htons(port);
+
+		if (inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr) <= 0)
+			error(-1, errno, "inet_pton");
+
+		if (connect(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0)
+			error(-1, errno, "connect");
+
+		send(sock, &buffer, sizeof(buffer), 0);
+		if (read(sock, &buffer, sizeof(buffer)) == -1)
+			error(-1, errno, "waiting read");
+
+		gettimeofday(&end, NULL);
+		lat = timediff(start, end);
+		sum_lat += lat;
+		nr_lat++;
+		if (lat < 100000)
+			goto close;
+
+		if (getsockname(sock, (struct sockaddr *)&laddr, &len) == -1)
+			error(-1, errno, "getsockname");
+		printf("port: %d, lat: %lu, avg: %lu, nr: %lu\n",
+				ntohs(laddr.sin_port), lat,
+				sum_lat / nr_lat, nr_lat);
+close:
+		fflush(stdout);
+		close(sock);
+	}
+}
+
+static void server(int sock, struct sockaddr_in address)
+{
+	int accepted;
+	int addrlen = sizeof(address);
+	int buffer;
+
+	while (1) {
+		accepted = accept(sock, (struct sockaddr *)&address,
+				(socklen_t *)&addrlen);
+		if (accepted < 0)
+			error(-1, errno, "accept");
+
+		if (read(accepted, &buffer, sizeof(buffer)) == -1)
+			error(-1, errno, "read");
+		close(accepted);
+	}
+}
+
+static void sig_handler(int signum)
+{
+	kill(SIGTERM, child_pid);
+	exit(0);
+}
+
+int main(int argc, char const *argv[])
+{
+	int sock;
+	int opt = 1;
+	struct sockaddr_in address;
+	struct sockaddr_in laddr;
+	socklen_t len = sizeof(laddr);
+
+	if (signal(SIGTERM, sig_handler) == SIG_ERR)
+		error(-1, errno, "signal");
+
+	sock = socket(AF_INET, SOCK_STREAM, 0);
+	if (sock < 0)
+		error(-1, errno, "socket");
+
+	if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR | SO_REUSEPORT,
+				&opt, sizeof(opt)) == -1)
+		error(-1, errno, "setsockopt");
+
+	address.sin_family = AF_INET;
+	address.sin_addr.s_addr = INADDR_ANY;
+	/* dynamically allocate unused port */
+	address.sin_port = 0;
+
+	if (bind(sock, (struct sockaddr *)&address, sizeof(address)) < 0)
+		error(-1, errno, "bind");
+
+	if (listen(sock, 3) < 0)
+		error(-1, errno, "listen");
+
+	if (getsockname(sock, (struct sockaddr *)&laddr, &len) == -1)
+		error(-1, errno, "getsockname");
+
+	fprintf(stderr, "server port: %d\n", ntohs(laddr.sin_port));
+	child_pid = fork();
+	if (!child_pid)
+		client(ntohs(laddr.sin_port));
+	else
+		server(sock, laddr);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/fin_ack_lat.sh b/tools/testing/selftests/net/fin_ack_lat.sh
new file mode 100755
index 000000000..a3ff6e0b2
--- /dev/null
+++ b/tools/testing/selftests/net/fin_ack_lat.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test latency spikes caused by FIN/ACK handling race.
+
+set +x
+set -e
+
+tmpfile=$(mktemp /tmp/fin_ack_latency.XXXX.log)
+
+cleanup() {
+	kill $(pidof fin_ack_lat)
+	rm -f $tmpfile
+}
+
+trap cleanup EXIT
+
+do_test() {
+	RUNTIME=$1
+
+	./fin_ack_lat | tee $tmpfile &
+	PID=$!
+
+	sleep $RUNTIME
+	NR_SPIKES=$(wc -l $tmpfile | awk '{print $1}')
+	if [ $NR_SPIKES -gt 0 ]
+	then
+		echo "FAIL: $NR_SPIKES spikes detected"
+		return 1
+	fi
+	return 0
+}
+
+do_test "30"
+echo "test done"
diff --git a/tools/testing/selftests/net/forwarding/.gitignore b/tools/testing/selftests/net/forwarding/.gitignore
new file mode 100644
index 000000000..2dea317f1
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+forwarding.config
diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
new file mode 100644
index 000000000..881e680c2
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+TEST_PROGS = bridge_igmp.sh \
+	bridge_port_isolation.sh \
+	bridge_sticky_fdb.sh \
+	bridge_vlan_aware.sh \
+	bridge_vlan_unaware.sh \
+	ethtool.sh \
+	gre_inner_v4_multipath.sh \
+	gre_inner_v6_multipath.sh \
+	gre_multipath.sh \
+	ip6_forward_instats_vrf.sh \
+	ip6gre_inner_v4_multipath.sh \
+	ip6gre_inner_v6_multipath.sh \
+	ipip_flat_gre_key.sh \
+	ipip_flat_gre_keys.sh \
+	ipip_flat_gre.sh \
+	ipip_hier_gre_key.sh \
+	ipip_hier_gre_keys.sh \
+	ipip_hier_gre.sh \
+	loopback.sh \
+	mirror_gre_bound.sh \
+	mirror_gre_bridge_1d.sh \
+	mirror_gre_bridge_1d_vlan.sh \
+	mirror_gre_bridge_1q_lag.sh \
+	mirror_gre_bridge_1q.sh \
+	mirror_gre_changes.sh \
+	mirror_gre_flower.sh \
+	mirror_gre_lag_lacp.sh \
+	mirror_gre_neigh.sh \
+	mirror_gre_nh.sh \
+	mirror_gre.sh \
+	mirror_gre_vlan_bridge_1q.sh \
+	mirror_gre_vlan.sh \
+	mirror_vlan.sh \
+	router_bridge.sh \
+	router_bridge_vlan.sh \
+	router_broadcast.sh \
+	router_mpath_nh.sh \
+	router_multicast.sh \
+	router_multipath.sh \
+	router.sh \
+	router_vid_1.sh \
+	sch_ets.sh \
+	sch_tbf_ets.sh \
+	sch_tbf_prio.sh \
+	sch_tbf_root.sh \
+	tc_actions.sh \
+	tc_chains.sh \
+	tc_flower_router.sh \
+	tc_flower.sh \
+	tc_shblocks.sh \
+	tc_vlan_modify.sh \
+	vxlan_asymmetric.sh \
+	vxlan_bridge_1d_port_8472.sh \
+	vxlan_bridge_1d.sh \
+	vxlan_bridge_1q_port_8472.sh \
+	vxlan_bridge_1q.sh \
+	vxlan_symmetric.sh
+
+TEST_PROGS_EXTENDED := devlink_lib.sh \
+	ethtool_lib.sh \
+	fib_offload_lib.sh \
+	forwarding.config.sample \
+	ipip_lib.sh \
+	lib.sh \
+	mirror_gre_lib.sh \
+	mirror_gre_topo_lib.sh \
+	mirror_lib.sh \
+	mirror_topo_lib.sh \
+	sch_ets_core.sh \
+	sch_ets_tests.sh \
+	sch_tbf_core.sh \
+	sch_tbf_etsprio.sh \
+	tc_common.sh
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README
new file mode 100644
index 000000000..b8a2af8fc
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/README
@@ -0,0 +1,58 @@
+Motivation
+==========
+
+One of the nice things about network namespaces is that they allow one
+to easily create and test complex environments.
+
+Unfortunately, these namespaces can not be used with actual switching
+ASICs, as their ports can not be migrated to other network namespaces
+(NETIF_F_NETNS_LOCAL) and most of them probably do not support the
+L1-separation provided by namespaces.
+
+However, a similar kind of flexibility can be achieved by using VRFs and
+by looping the switch ports together. For example:
+
+                             br0
+                              +
+               vrf-h1         |           vrf-h2
+                 +        +---+----+        +
+                 |        |        |        |
+    192.0.2.1/24 +        +        +        + 192.0.2.2/24
+               swp1     swp2     swp3     swp4
+                 +        +        +        +
+                 |        |        |        |
+                 +--------+        +--------+
+
+The VRFs act as lightweight namespaces representing hosts connected to
+the switch.
+
+This approach for testing switch ASICs has several advantages over the
+traditional method that requires multiple physical machines, to name a
+few:
+
+1. Only the device under test (DUT) is being tested without noise from
+other system.
+
+2. Ability to easily provision complex topologies. Testing bridging
+between 4-ports LAGs or 8-way ECMP requires many physical links that are
+not always available. With the VRF-based approach one merely needs to
+loopback more ports.
+
+These tests are written with switch ASICs in mind, but they can be run
+on any Linux box using veth pairs to emulate physical loopbacks.
+
+Guidelines for Writing Tests
+============================
+
+o Where possible, reuse an existing topology for different tests instead
+  of recreating the same topology.
+o Tests that use anything but the most trivial topologies should include
+  an ASCII art showing the topology.
+o Where possible, IPv6 and IPv4 addresses shall conform to RFC 3849 and
+  RFC 5737, respectively.
+o Where possible, tests shall be written so that they can be reused by
+  multiple topologies and added to lib.sh.
+o Checks shall be added to lib.sh for any external dependencies.
+o Code shall be checked using ShellCheck [1] prior to submission.
+
+1. https://www.shellcheck.net/
diff --git a/tools/testing/selftests/net/forwarding/bridge_igmp.sh b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
new file mode 100755
index 000000000..88d2472ba
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_igmp.sh
@@ -0,0 +1,152 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="reportleave_test"
+NUM_NETIFS=4
+CHECK_TC="yes"
+TEST_GROUP="239.10.10.10"
+TEST_GROUP_MAC="01:00:5e:0a:0a:0a"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge mcast_snooping 1 mcast_querier 1
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	# Always cleanup the mcast group
+	ip address del dev $h2 $TEST_GROUP/32 2>&1 1>/dev/null
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+# return 0 if the packet wasn't seen on host2_if or 1 if it was
+mcast_packet_test()
+{
+	local mac=$1
+	local ip=$2
+	local host1_if=$3
+	local host2_if=$4
+	local seen=0
+
+	# Add an ACL on `host2_if` which will tell us whether the packet
+	# was received by it or not.
+	tc qdisc add dev $host2_if ingress
+	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
+		flower dst_mac $mac action drop
+
+	$MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t udp "dp=4096,sp=2048" -q
+	sleep 1
+
+	tc -j -s filter show dev $host2_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	if [[ $? -eq 0 ]]; then
+		seen=1
+	fi
+
+	tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower
+	tc qdisc del dev $host2_if ingress
+
+	return $seen
+}
+
+reportleave_test()
+{
+	RET=0
+	ip address add dev $h2 $TEST_GROUP/32 autojoin
+	check_err $? "Could not join $TEST_GROUP"
+
+	sleep 5
+	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
+	check_err $? "Report didn't create mdb entry for $TEST_GROUP"
+
+	mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2
+	check_fail $? "Traffic to $TEST_GROUP wasn't forwarded"
+
+	log_test "IGMP report $TEST_GROUP"
+
+	RET=0
+	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
+	check_err $? "mdb entry for $TEST_GROUP is missing"
+
+	ip address del dev $h2 $TEST_GROUP/32
+	check_err $? "Could not leave $TEST_GROUP"
+
+	sleep 5
+	bridge mdb show dev br0 | grep $TEST_GROUP 1>/dev/null
+	check_fail $? "Leave didn't delete mdb entry for $TEST_GROUP"
+
+	mcast_packet_test $TEST_GROUP_MAC $TEST_GROUP $h1 $h2
+	check_err $? "Traffic to $TEST_GROUP was forwarded without mdb entry"
+
+	log_test "IGMP leave $TEST_GROUP"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh b/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh
new file mode 100755
index 000000000..a43b4645c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh
@@ -0,0 +1,151 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 flooding"
+NUM_NETIFS=6
+CHECK_TC="yes"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.3/24 2001:db8:1::3/64
+}
+
+h3_destroy()
+{
+	simple_if_fini $h3 192.0.2.3/24 2001:db8:1::3/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+	ip link set dev $swp3 master br0
+
+	ip link set dev $swp1 type bridge_slave isolated on
+	check_err $? "Can't set isolation on port $swp1"
+	ip link set dev $swp2 type bridge_slave isolated on
+	check_err $? "Can't set isolation on port $swp2"
+	ip link set dev $swp3 type bridge_slave isolated off
+	check_err $? "Can't disable isolation on port $swp3"
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+	ip link set dev $swp3 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp3 down
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	RET=0
+	ping_do $h1 192.0.2.2
+	check_fail $? "Ping worked when it should not have"
+
+	RET=0
+	ping_do $h3 192.0.2.2
+	check_err $? "Ping didn't work when it should have"
+
+	log_test "Isolated port ping"
+}
+
+ping_ipv6()
+{
+	RET=0
+	ping6_do $h1 2001:db8:1::2
+	check_fail $? "Ping6 worked when it should not have"
+
+	RET=0
+	ping6_do $h3 2001:db8:1::2
+	check_err $? "Ping6 didn't work when it should have"
+
+	log_test "Isolated port ping6"
+}
+
+flooding()
+{
+	local mac=de:ad:be:ef:13:37
+	local ip=192.0.2.100
+
+	RET=0
+	flood_test_do false $mac $ip $h1 $h2
+	check_err $? "Packet was flooded when it should not have been"
+
+	RET=0
+	flood_test_do true $mac $ip $h3 $h2
+	check_err $? "Packet was not flooded when it should have been"
+
+	log_test "Isolated port flooding"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh b/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
new file mode 100755
index 000000000..1f8ef0eff
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_sticky_fdb.sh
@@ -0,0 +1,69 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="sticky"
+NUM_NETIFS=4
+TEST_MAC=de:ad:be:ef:13:37
+source lib.sh
+
+switch_create()
+{
+	ip link add dev br0 type bridge
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $h1 up
+	ip link set dev $swp1 up
+	ip link set dev $h2 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $h2 down
+	ip link set dev $swp1 down
+	ip link set dev $h1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+	h2=${NETIFS[p3]}
+	swp2=${NETIFS[p4]}
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+	switch_destroy
+}
+
+sticky()
+{
+	bridge fdb add $TEST_MAC dev $swp1 master static sticky
+	check_err $? "Could not add fdb entry"
+	bridge fdb del $TEST_MAC dev $swp1 vlan 1 master static sticky
+	$MZ $h2 -c 1 -a $TEST_MAC -t arp "request" -q
+	bridge -j fdb show br br0 brport $swp1\
+		| jq -e ".[] | select(.mac == \"$TEST_MAC\")" &> /dev/null
+	check_err $? "Did not find FDB record when should"
+
+	log_test "Sticky fdb entry"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
new file mode 100755
index 000000000..b90dff8d3
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh
@@ -0,0 +1,151 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion extern_learn"
+NUM_NETIFS=4
+CHECK_TC="yes"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	# 10 Seconds ageing time.
+	ip link add dev br0 type bridge vlan_filtering 1 ageing_time 1000 \
+		mcast_snooping 0
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+learning()
+{
+	learning_test "br0" $swp1 $h1 $h2
+}
+
+flooding()
+{
+	flood_test $swp2 $h1 $h2
+}
+
+vlan_deletion()
+{
+	# Test that the deletion of a VLAN on a bridge port does not affect
+	# the PVID VLAN
+	log_info "Add and delete a VLAN on bridge port $swp1"
+
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+
+	ping_ipv4
+	ping_ipv6
+}
+
+extern_learn()
+{
+	local mac=de:ad:be:ef:13:37
+	local ageing_time
+
+	# Test that externally learned FDB entries can roam, but not age out
+	RET=0
+
+	bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn vlan 1
+
+	bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37
+	check_err $? "Did not find FDB entry when should"
+
+	# Wait for 10 seconds after the ageing time to make sure the FDB entry
+	# was not aged out
+	ageing_time=$(bridge_ageing_time_get br0)
+	sleep $((ageing_time + 10))
+
+	bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37
+	check_err $? "FDB entry was aged out when should not"
+
+	$MZ $h2 -c 1 -p 64 -a $mac -t ip -q
+
+	bridge fdb show brport $swp2 | grep -q de:ad:be:ef:13:37
+	check_err $? "FDB entry did not roam when should"
+
+	log_test "Externally learned FDB entry - ageing & roaming"
+
+	bridge fdb del de:ad:be:ef:13:37 dev $swp2 master vlan 1 &> /dev/null
+	bridge fdb del de:ad:be:ef:13:37 dev $swp1 master vlan 1 &> /dev/null
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh
new file mode 100755
index 000000000..c15c6c85c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh
@@ -0,0 +1,104 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	# 10 Seconds ageing time.
+	ip link add dev br0 type bridge ageing_time 1000 mcast_snooping 0
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+learning()
+{
+	learning_test "br0" $swp1 $h1 $h2
+}
+
+flooding()
+{
+	flood_test $swp2 $h1 $h2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config
new file mode 100644
index 000000000..da96eff72
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/config
@@ -0,0 +1,14 @@
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_VRF=m
+CONFIG_BPF_SYSCALL=y
+CONFIG_CGROUP_BPF=y
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_VETH=m
+CONFIG_NAMESPACES=y
+CONFIG_NET_NS=y
diff --git a/tools/testing/selftests/net/forwarding/devlink_lib.sh b/tools/testing/selftests/net/forwarding/devlink_lib.sh
new file mode 100644
index 000000000..9c12c4fd3
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/devlink_lib.sh
@@ -0,0 +1,557 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Defines
+
+if [[ ! -v DEVLINK_DEV ]]; then
+	DEVLINK_DEV=$(devlink port show "${NETIFS[p1]:-$NETIF_NO_CABLE}" -j \
+			     | jq -r '.port | keys[]' | cut -d/ -f-2)
+	if [ -z "$DEVLINK_DEV" ]; then
+		echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it"
+		exit 1
+	fi
+	if [[ "$(echo $DEVLINK_DEV | grep -c pci)" -eq 0 ]]; then
+		echo "SKIP: devlink device's bus is not PCI"
+		exit 1
+	fi
+
+	DEVLINK_VIDDID=$(lspci -s $(echo $DEVLINK_DEV | cut -d"/" -f2) \
+			 -n | cut -d" " -f3)
+fi
+
+##############################################################################
+# Sanity checks
+
+devlink help 2>&1 | grep resource &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink resource support"
+	exit 1
+fi
+
+devlink help 2>&1 | grep trap &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink trap support"
+	exit 1
+fi
+
+devlink dev help 2>&1 | grep info &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink dev info support"
+	exit 1
+fi
+
+##############################################################################
+# Devlink helpers
+
+devlink_resource_names_to_path()
+{
+	local resource
+	local path=""
+
+	for resource in "${@}"; do
+		if [ "$path" == "" ]; then
+			path="$resource"
+		else
+			path="${path}/$resource"
+		fi
+	done
+
+	echo "$path"
+}
+
+devlink_resource_get()
+{
+	local name=$1
+	local resource_name=.[][\"$DEVLINK_DEV\"]
+
+	resource_name="$resource_name | .[] | select (.name == \"$name\")"
+
+	shift
+	for resource in "${@}"; do
+		resource_name="${resource_name} | .[\"resources\"][] | \
+			       select (.name == \"$resource\")"
+	done
+
+	devlink -j resource show "$DEVLINK_DEV" | jq "$resource_name"
+}
+
+devlink_resource_size_get()
+{
+	local size=$(devlink_resource_get "$@" | jq '.["size_new"]')
+
+	if [ "$size" == "null" ]; then
+		devlink_resource_get "$@" | jq '.["size"]'
+	else
+		echo "$size"
+	fi
+}
+
+devlink_resource_size_set()
+{
+	local new_size=$1
+	local path
+
+	shift
+	path=$(devlink_resource_names_to_path "$@")
+	devlink resource set "$DEVLINK_DEV" path "$path" size "$new_size"
+	check_err $? "Failed setting path $path to size $size"
+}
+
+devlink_resource_occ_get()
+{
+	devlink_resource_get "$@" | jq '.["occ"]'
+}
+
+devlink_reload()
+{
+	local still_pending
+
+	devlink dev reload "$DEVLINK_DEV" &> /dev/null
+	check_err $? "Failed reload"
+
+	still_pending=$(devlink resource show "$DEVLINK_DEV" | \
+			grep -c "size_new")
+	check_err $still_pending "Failed reload - There are still unset sizes"
+}
+
+declare -A DEVLINK_ORIG
+
+# Changing pool type from static to dynamic causes reinterpretation of threshold
+# values. They therefore need to be saved before pool type is changed, then the
+# pool type can be changed, and then the new values need to be set up. Therefore
+# instead of saving the current state implicitly in the _set call, provide
+# functions for all three primitives: save, set, and restore.
+
+devlink_port_pool_threshold()
+{
+	local port=$1; shift
+	local pool=$1; shift
+
+	devlink sb port pool show $port pool $pool -j \
+		| jq '.port_pool."'"$port"'"[].threshold'
+}
+
+devlink_port_pool_th_save()
+{
+	local port=$1; shift
+	local pool=$1; shift
+	local key="port_pool($port,$pool).threshold"
+
+	DEVLINK_ORIG[$key]=$(devlink_port_pool_threshold $port $pool)
+}
+
+devlink_port_pool_th_set()
+{
+	local port=$1; shift
+	local pool=$1; shift
+	local th=$1; shift
+
+	devlink sb port pool set $port pool $pool th $th
+}
+
+devlink_port_pool_th_restore()
+{
+	local port=$1; shift
+	local pool=$1; shift
+	local key="port_pool($port,$pool).threshold"
+	local -a orig=(${DEVLINK_ORIG[$key]})
+
+	if [[ -z $orig ]]; then
+		echo "WARNING: Mismatched devlink_port_pool_th_restore"
+	else
+		devlink sb port pool set $port pool $pool th $orig
+	fi
+}
+
+devlink_pool_size_thtype()
+{
+	local pool=$1; shift
+
+	devlink sb pool show "$DEVLINK_DEV" pool $pool -j \
+	    | jq -r '.pool[][] | (.size, .thtype)'
+}
+
+devlink_pool_size_thtype_save()
+{
+	local pool=$1; shift
+	local key="pool($pool).size_thtype"
+
+	DEVLINK_ORIG[$key]=$(devlink_pool_size_thtype $pool)
+}
+
+devlink_pool_size_thtype_set()
+{
+	local pool=$1; shift
+	local thtype=$1; shift
+	local size=$1; shift
+
+	devlink sb pool set "$DEVLINK_DEV" pool $pool size $size thtype $thtype
+}
+
+devlink_pool_size_thtype_restore()
+{
+	local pool=$1; shift
+	local key="pool($pool).size_thtype"
+	local -a orig=(${DEVLINK_ORIG[$key]})
+
+	if [[ -z ${orig[0]} ]]; then
+		echo "WARNING: Mismatched devlink_pool_size_thtype_restore"
+	else
+		devlink sb pool set "$DEVLINK_DEV" pool $pool \
+			size ${orig[0]} thtype ${orig[1]}
+	fi
+}
+
+devlink_tc_bind_pool_th()
+{
+	local port=$1; shift
+	local tc=$1; shift
+	local dir=$1; shift
+
+	devlink sb tc bind show $port tc $tc type $dir -j \
+	    | jq -r '.tc_bind[][] | (.pool, .threshold)'
+}
+
+devlink_tc_bind_pool_th_save()
+{
+	local port=$1; shift
+	local tc=$1; shift
+	local dir=$1; shift
+	local key="tc_bind($port,$dir,$tc).pool_th"
+
+	DEVLINK_ORIG[$key]=$(devlink_tc_bind_pool_th $port $tc $dir)
+}
+
+devlink_tc_bind_pool_th_set()
+{
+	local port=$1; shift
+	local tc=$1; shift
+	local dir=$1; shift
+	local pool=$1; shift
+	local th=$1; shift
+
+	devlink sb tc bind set $port tc $tc type $dir pool $pool th $th
+}
+
+devlink_tc_bind_pool_th_restore()
+{
+	local port=$1; shift
+	local tc=$1; shift
+	local dir=$1; shift
+	local key="tc_bind($port,$dir,$tc).pool_th"
+	local -a orig=(${DEVLINK_ORIG[$key]})
+
+	if [[ -z ${orig[0]} ]]; then
+		echo "WARNING: Mismatched devlink_tc_bind_pool_th_restore"
+	else
+		devlink sb tc bind set $port tc $tc type $dir \
+			pool ${orig[0]} th ${orig[1]}
+	fi
+}
+
+devlink_traps_num_get()
+{
+	devlink -j trap | jq '.[]["'$DEVLINK_DEV'"] | length'
+}
+
+devlink_traps_get()
+{
+	devlink -j trap | jq -r '.[]["'$DEVLINK_DEV'"][].name'
+}
+
+devlink_trap_type_get()
+{
+	local trap_name=$1; shift
+
+	devlink -j trap show $DEVLINK_DEV trap $trap_name \
+		| jq -r '.[][][].type'
+}
+
+devlink_trap_action_set()
+{
+	local trap_name=$1; shift
+	local action=$1; shift
+
+	# Pipe output to /dev/null to avoid expected warnings.
+	devlink trap set $DEVLINK_DEV trap $trap_name \
+		action $action &> /dev/null
+}
+
+devlink_trap_action_get()
+{
+	local trap_name=$1; shift
+
+	devlink -j trap show $DEVLINK_DEV trap $trap_name \
+		| jq -r '.[][][].action'
+}
+
+devlink_trap_group_get()
+{
+	devlink -j trap show $DEVLINK_DEV trap $trap_name \
+		| jq -r '.[][][].group'
+}
+
+devlink_trap_metadata_test()
+{
+	local trap_name=$1; shift
+	local metadata=$1; shift
+
+	devlink -jv trap show $DEVLINK_DEV trap $trap_name \
+		| jq -e '.[][][].metadata | contains(["'$metadata'"])' \
+		&> /dev/null
+}
+
+devlink_trap_rx_packets_get()
+{
+	local trap_name=$1; shift
+
+	devlink -js trap show $DEVLINK_DEV trap $trap_name \
+		| jq '.[][][]["stats"]["rx"]["packets"]'
+}
+
+devlink_trap_rx_bytes_get()
+{
+	local trap_name=$1; shift
+
+	devlink -js trap show $DEVLINK_DEV trap $trap_name \
+		| jq '.[][][]["stats"]["rx"]["bytes"]'
+}
+
+devlink_trap_stats_idle_test()
+{
+	local trap_name=$1; shift
+	local t0_packets t0_bytes
+	local t1_packets t1_bytes
+
+	t0_packets=$(devlink_trap_rx_packets_get $trap_name)
+	t0_bytes=$(devlink_trap_rx_bytes_get $trap_name)
+
+	sleep 1
+
+	t1_packets=$(devlink_trap_rx_packets_get $trap_name)
+	t1_bytes=$(devlink_trap_rx_bytes_get $trap_name)
+
+	if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+devlink_traps_enable_all()
+{
+	local trap_name
+
+	for trap_name in $(devlink_traps_get); do
+		devlink_trap_action_set $trap_name "trap"
+	done
+}
+
+devlink_traps_disable_all()
+{
+	for trap_name in $(devlink_traps_get); do
+		devlink_trap_action_set $trap_name "drop"
+	done
+}
+
+devlink_trap_groups_get()
+{
+	devlink -j trap group | jq -r '.[]["'$DEVLINK_DEV'"][].name'
+}
+
+devlink_trap_group_action_set()
+{
+	local group_name=$1; shift
+	local action=$1; shift
+
+	# Pipe output to /dev/null to avoid expected warnings.
+	devlink trap group set $DEVLINK_DEV group $group_name action $action \
+		&> /dev/null
+}
+
+devlink_trap_group_rx_packets_get()
+{
+	local group_name=$1; shift
+
+	devlink -js trap group show $DEVLINK_DEV group $group_name \
+		| jq '.[][][]["stats"]["rx"]["packets"]'
+}
+
+devlink_trap_group_rx_bytes_get()
+{
+	local group_name=$1; shift
+
+	devlink -js trap group show $DEVLINK_DEV group $group_name \
+		| jq '.[][][]["stats"]["rx"]["bytes"]'
+}
+
+devlink_trap_group_stats_idle_test()
+{
+	local group_name=$1; shift
+	local t0_packets t0_bytes
+	local t1_packets t1_bytes
+
+	t0_packets=$(devlink_trap_group_rx_packets_get $group_name)
+	t0_bytes=$(devlink_trap_group_rx_bytes_get $group_name)
+
+	sleep 1
+
+	t1_packets=$(devlink_trap_group_rx_packets_get $group_name)
+	t1_bytes=$(devlink_trap_group_rx_bytes_get $group_name)
+
+	if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+devlink_trap_exception_test()
+{
+	local trap_name=$1; shift
+	local group_name
+
+	group_name=$(devlink_trap_group_get $trap_name)
+
+	devlink_trap_stats_idle_test $trap_name
+	check_fail $? "Trap stats idle when packets should have been trapped"
+
+	devlink_trap_group_stats_idle_test $group_name
+	check_fail $? "Trap group idle when packets should have been trapped"
+}
+
+devlink_trap_drop_test()
+{
+	local trap_name=$1; shift
+	local dev=$1; shift
+	local handle=$1; shift
+	local group_name
+
+	group_name=$(devlink_trap_group_get $trap_name)
+
+	# This is the common part of all the tests. It checks that stats are
+	# initially idle, then non-idle after changing the trap action and
+	# finally idle again. It also makes sure the packets are dropped and
+	# never forwarded.
+	devlink_trap_stats_idle_test $trap_name
+	check_err $? "Trap stats not idle with initial drop action"
+	devlink_trap_group_stats_idle_test $group_name
+	check_err $? "Trap group stats not idle with initial drop action"
+
+	devlink_trap_action_set $trap_name "trap"
+	devlink_trap_stats_idle_test $trap_name
+	check_fail $? "Trap stats idle after setting action to trap"
+	devlink_trap_group_stats_idle_test $group_name
+	check_fail $? "Trap group stats idle after setting action to trap"
+
+	devlink_trap_action_set $trap_name "drop"
+
+	devlink_trap_stats_idle_test $trap_name
+	check_err $? "Trap stats not idle after setting action to drop"
+	devlink_trap_group_stats_idle_test $group_name
+	check_err $? "Trap group stats not idle after setting action to drop"
+
+	tc_check_packets "dev $dev egress" $handle 0
+	check_err $? "Packets were not dropped"
+}
+
+devlink_trap_drop_cleanup()
+{
+	local mz_pid=$1; shift
+	local dev=$1; shift
+	local proto=$1; shift
+	local pref=$1; shift
+	local handle=$1; shift
+
+	kill $mz_pid && wait $mz_pid &> /dev/null
+	tc filter del dev $dev egress protocol $proto pref $pref handle $handle flower
+}
+
+devlink_trap_stats_test()
+{
+	local test_name=$1; shift
+	local trap_name=$1; shift
+	local send_one="$@"
+	local t0_packets
+	local t1_packets
+
+	RET=0
+
+	t0_packets=$(devlink_trap_rx_packets_get $trap_name)
+
+	$send_one && sleep 1
+
+	t1_packets=$(devlink_trap_rx_packets_get $trap_name)
+
+	if [[ $t1_packets -eq $t0_packets ]]; then
+		check_err 1 "Trap stats did not increase"
+	fi
+
+	log_test "$test_name"
+}
+
+devlink_trap_policers_num_get()
+{
+	devlink -j -p trap policer show | jq '.[]["'$DEVLINK_DEV'"] | length'
+}
+
+devlink_trap_policer_rate_get()
+{
+	local policer_id=$1; shift
+
+	devlink -j -p trap policer show $DEVLINK_DEV policer $policer_id \
+		| jq '.[][][]["rate"]'
+}
+
+devlink_trap_policer_burst_get()
+{
+	local policer_id=$1; shift
+
+	devlink -j -p trap policer show $DEVLINK_DEV policer $policer_id \
+		| jq '.[][][]["burst"]'
+}
+
+devlink_trap_policer_rx_dropped_get()
+{
+	local policer_id=$1; shift
+
+	devlink -j -p -s trap policer show $DEVLINK_DEV policer $policer_id \
+		| jq '.[][][]["stats"]["rx"]["dropped"]'
+}
+
+devlink_trap_group_policer_get()
+{
+	local group_name=$1; shift
+
+	devlink -j -p trap group show $DEVLINK_DEV group $group_name \
+		| jq '.[][][]["policer"]'
+}
+
+devlink_trap_policer_ids_get()
+{
+	devlink -j -p trap policer show \
+		| jq '.[]["'$DEVLINK_DEV'"][]["policer"]'
+}
+
+devlink_port_by_netdev()
+{
+	local if_name=$1
+
+	devlink -j port show $if_name | jq -e '.[] | keys' | jq -r '.[]'
+}
+
+devlink_cpu_port_get()
+{
+	local cpu_dl_port_num=$(devlink port list | grep "$DEVLINK_DEV" |
+				grep cpu | cut -d/ -f3 | cut -d: -f1 |
+				sed -n '1p')
+
+	echo "$DEVLINK_DEV/$cpu_dl_port_num"
+}
+
+devlink_cell_size_get()
+{
+	devlink sb pool show "$DEVLINK_DEV" pool 0 -j \
+	    | jq '.pool[][].cell_size'
+}
diff --git a/tools/testing/selftests/net/forwarding/ethtool.sh b/tools/testing/selftests/net/forwarding/ethtool.sh
new file mode 100755
index 000000000..aa2eafb7b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ethtool.sh
@@ -0,0 +1,301 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	same_speeds_autoneg_off
+	different_speeds_autoneg_off
+	combination_of_neg_on_and_off
+	advertise_subset_of_speeds
+	check_highest_speed_is_chosen
+	different_speeds_autoneg_on
+"
+NUM_NETIFS=2
+source lib.sh
+source ethtool_lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+}
+
+same_speeds_autoneg_off()
+{
+	# Check that when each of the reported speeds is forced, the links come
+	# up and are operational.
+	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0))
+
+	for speed in "${speeds_arr[@]}"; do
+		RET=0
+		ethtool_set $h1 speed $speed autoneg off
+		ethtool_set $h2 speed $speed autoneg off
+
+		setup_wait_dev_with_timeout $h1
+		setup_wait_dev_with_timeout $h2
+		ping_do $h1 192.0.2.2
+		check_err $? "speed $speed autoneg off"
+		log_test "force of same speed autoneg off"
+		log_info "speed = $speed"
+	done
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+different_speeds_autoneg_off()
+{
+	# Test that when we force different speeds, links are not up and ping
+	# fails.
+	RET=0
+
+	local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0))
+	local speed1=${speeds_arr[0]}
+	local speed2=${speeds_arr[1]}
+
+	ethtool_set $h1 speed $speed1 autoneg off
+	ethtool_set $h2 speed $speed2 autoneg off
+
+	setup_wait_dev_with_timeout $h1
+	setup_wait_dev_with_timeout $h2
+	ping_do $h1 192.0.2.2
+	check_fail $? "ping with different speeds"
+
+	log_test "force of different speeds autoneg off"
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+combination_of_neg_on_and_off()
+{
+	# Test that when one device is forced to a speed supported by both
+	# endpoints and the other device is configured to autoneg on, the links
+	# are up and ping passes.
+	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
+
+	for speed in "${speeds_arr[@]}"; do
+		RET=0
+		ethtool_set $h1 speed $speed autoneg off
+
+		setup_wait_dev_with_timeout $h1
+		setup_wait_dev_with_timeout $h2
+		ping_do $h1 192.0.2.2
+		check_err $? "h1-speed=$speed autoneg off, h2 autoneg on"
+		log_test "one side with autoneg off and another with autoneg on"
+		log_info "force speed = $speed"
+	done
+
+	ethtool -s $h1 autoneg on
+}
+
+hex_speed_value_get()
+{
+	local speed=$1; shift
+
+	local shift_size=${speed_values[$speed]}
+	speed=$((0x1 << $"shift_size"))
+	printf "%#x" "$speed"
+}
+
+subset_of_common_speeds_get()
+{
+	local dev1=$1; shift
+	local dev2=$1; shift
+	local adver=$1; shift
+
+	local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver))
+	local speed_to_advertise=0
+	local speed_to_remove=${speeds_arr[0]}
+	speed_to_remove+='base'
+
+	local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver))
+
+	for speed in ${speeds_mode_arr[@]}; do
+		if [[ $speed != $speed_to_remove* ]]; then
+			speed=$(hex_speed_value_get $speed)
+			speed_to_advertise=$(($speed_to_advertise | \
+						$speed))
+		fi
+
+	done
+
+	# Convert to hex.
+	printf "%#x" "$speed_to_advertise"
+}
+
+speed_to_advertise_get()
+{
+	# The function returns the hex number that is composed by OR-ing all
+	# the modes corresponding to the provided speed.
+	local speed_without_mode=$1; shift
+	local supported_speeds=("$@"); shift
+	local speed_to_advertise=0
+
+	speed_without_mode+='base'
+
+	for speed in ${supported_speeds[@]}; do
+		if [[ $speed == $speed_without_mode* ]]; then
+			speed=$(hex_speed_value_get $speed)
+			speed_to_advertise=$(($speed_to_advertise | \
+						$speed))
+		fi
+
+	done
+
+	# Convert to hex.
+	printf "%#x" "$speed_to_advertise"
+}
+
+advertise_subset_of_speeds()
+{
+	# Test that when one device advertises a subset of speeds and another
+	# advertises a specific speed (but all modes of this speed), the links
+	# are up and ping passes.
+	RET=0
+
+	local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
+	ethtool_set $h1 advertise $speed_1_to_advertise
+
+	if [ $RET != 0 ]; then
+		log_test "advertise subset of speeds"
+		return
+	fi
+
+	local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1))
+	# Check only speeds that h1 advertised. Remove the first speed.
+	unset speeds_arr_without_mode[0]
+	local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1))
+
+	for speed_value in ${speeds_arr_without_mode[@]}; do
+		RET=0
+		local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \
+			"${speeds_arr_with_mode[@]}")
+		ethtool_set $h2 advertise $speed_2_to_advertise
+
+		setup_wait_dev_with_timeout $h1
+		setup_wait_dev_with_timeout $h2
+		ping_do $h1 192.0.2.2
+		check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"
+
+		log_test "advertise subset of speeds"
+		log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise"
+	done
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+check_highest_speed_is_chosen()
+{
+	# Test that when one device advertises a subset of speeds, the other
+	# chooses the highest speed. This test checks configuration without
+	# traffic.
+	RET=0
+
+	local max_speed
+	local chosen_speed
+	local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
+
+	ethtool_set $h1 advertise $speed_to_advertise
+
+	if [ $RET != 0 ]; then
+		log_test "check highest speed"
+		return
+	fi
+
+	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))
+
+	max_speed=${speeds_arr[0]}
+	for current in ${speeds_arr[@]}; do
+		if [[ $current -gt $max_speed ]]; then
+			max_speed=$current
+		fi
+	done
+
+	setup_wait_dev_with_timeout $h1
+	setup_wait_dev_with_timeout $h2
+	chosen_speed=$(ethtool $h1 | grep 'Speed:')
+	chosen_speed=${chosen_speed%"Mb/s"*}
+	chosen_speed=${chosen_speed#*"Speed: "}
+	((chosen_speed == max_speed))
+	check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed"
+
+	log_test "check highest speed"
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+different_speeds_autoneg_on()
+{
+	# Test that when we configure links to advertise different speeds,
+	# links are not up and ping fails.
+	RET=0
+
+	local -a speeds=($(different_speeds_get $h1 $h2 1 1))
+	local speed1=${speeds[0]}
+	local speed2=${speeds[1]}
+
+	speed1=$(hex_speed_value_get $speed1)
+	speed2=$(hex_speed_value_get $speed2)
+
+	ethtool_set $h1 advertise $speed1
+	ethtool_set $h2 advertise $speed2
+
+	if (($RET)); then
+		setup_wait_dev_with_timeout $h1
+		setup_wait_dev_with_timeout $h2
+		ping_do $h1 192.0.2.2
+		check_fail $? "ping with different speeds autoneg on"
+	fi
+
+	log_test "advertise different speeds autoneg on"
+
+	ethtool -s $h2 autoneg on
+	ethtool -s $h1 autoneg on
+}
+
+skip_on_veth
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+declare -gA speed_values
+eval "speed_values=($(speeds_arr_get))"
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh
new file mode 100755
index 000000000..baf831da5
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh
@@ -0,0 +1,104 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	autoneg
+	autoneg_force_mode
+	no_cable
+"
+
+NUM_NETIFS=2
+source lib.sh
+source ethtool_lib.sh
+
+setup_prepare()
+{
+	swp1=${NETIFS[p1]}
+	swp2=${NETIFS[p2]}
+	swp3=$NETIF_NO_CABLE
+}
+
+ethtool_extended_state_check()
+{
+	local dev=$1; shift
+	local expected_ext_state=$1; shift
+	local expected_ext_substate=${1:-""}; shift
+
+	local ext_state=$(ethtool $dev | grep "Link detected" \
+		| cut -d "(" -f2 | cut -d ")" -f1)
+	local ext_substate=$(echo $ext_state | cut -sd "," -f2 \
+		| sed -e 's/^[[:space:]]*//')
+	ext_state=$(echo $ext_state | cut -d "," -f1)
+
+	[[ $ext_state == $expected_ext_state ]]
+	check_err $? "Expected \"$expected_ext_state\", got \"$ext_state\""
+
+	[[ $ext_substate == $expected_ext_substate ]]
+	check_err $? "Expected \"$expected_ext_substate\", got \"$ext_substate\""
+}
+
+autoneg()
+{
+	RET=0
+
+	ip link set dev $swp1 up
+
+	sleep 4
+	ethtool_extended_state_check $swp1 "Autoneg" "No partner detected"
+
+	log_test "Autoneg, No partner detected"
+
+	ip link set dev $swp1 down
+}
+
+autoneg_force_mode()
+{
+	RET=0
+
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	local -a speeds_arr=($(different_speeds_get $swp1 $swp2 0 0))
+	local speed1=${speeds_arr[0]}
+	local speed2=${speeds_arr[1]}
+
+	ethtool_set $swp1 speed $speed1 autoneg off
+	ethtool_set $swp2 speed $speed2 autoneg off
+
+	sleep 4
+	ethtool_extended_state_check $swp1 "Autoneg" \
+		"No partner detected during force mode"
+
+	ethtool_extended_state_check $swp2 "Autoneg" \
+		"No partner detected during force mode"
+
+	log_test "Autoneg, No partner detected during force mode"
+
+	ethtool -s $swp2 autoneg on
+	ethtool -s $swp1 autoneg on
+
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+}
+
+no_cable()
+{
+	RET=0
+
+	ip link set dev $swp3 up
+
+	sleep 1
+	ethtool_extended_state_check $swp3 "No cable"
+
+	log_test "No cable"
+
+	ip link set dev $swp3 down
+}
+
+skip_on_veth
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ethtool_lib.sh b/tools/testing/selftests/net/forwarding/ethtool_lib.sh
new file mode 100644
index 000000000..9188e624d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ethtool_lib.sh
@@ -0,0 +1,86 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+speeds_arr_get()
+{
+	cmd='/ETHTOOL_LINK_MODE_[^[:space:]]*_BIT[[:space:]]+=[[:space:]]+/ \
+		{sub(/,$/, "") \
+		sub(/ETHTOOL_LINK_MODE_/,"") \
+		sub(/_BIT/,"") \
+		sub(/_Full/,"/Full") \
+		sub(/_Half/,"/Half");\
+		print "["$1"]="$3}'
+
+	awk "${cmd}" /usr/include/linux/ethtool.h
+}
+
+ethtool_set()
+{
+	local cmd="$@"
+	local out=$(ethtool -s $cmd 2>&1 | wc -l)
+
+	check_err $out "error in configuration. $cmd"
+}
+
+dev_speeds_get()
+{
+	local dev=$1; shift
+	local with_mode=$1; shift
+	local adver=$1; shift
+	local speeds_str
+
+	if (($adver)); then
+		mode="Advertised link modes"
+	else
+		mode="Supported link modes"
+	fi
+
+	speeds_str=$(ethtool "$dev" | \
+		# Snip everything before the link modes section.
+		sed -n '/'"$mode"':/,$p' | \
+		# Quit processing the rest at the start of the next section.
+		# When checking, skip the header of this section (hence the 2,).
+		sed -n '2,${/^[\t][^ \t]/q};p' | \
+		# Drop the section header of the current section.
+		cut -d':' -f2)
+
+	local -a speeds_arr=($speeds_str)
+	if [[ $with_mode -eq 0 ]]; then
+		for ((i=0; i<${#speeds_arr[@]}; i++)); do
+			speeds_arr[$i]=${speeds_arr[$i]%base*}
+		done
+	fi
+	echo ${speeds_arr[@]}
+}
+
+common_speeds_get()
+{
+	dev1=$1; shift
+	dev2=$1; shift
+	with_mode=$1; shift
+	adver=$1; shift
+
+	local -a dev1_speeds=($(dev_speeds_get $dev1 $with_mode $adver))
+	local -a dev2_speeds=($(dev_speeds_get $dev2 $with_mode $adver))
+
+	comm -12 \
+		<(printf '%s\n' "${dev1_speeds[@]}" | sort -u) \
+		<(printf '%s\n' "${dev2_speeds[@]}" | sort -u)
+}
+
+different_speeds_get()
+{
+	local dev1=$1; shift
+	local dev2=$1; shift
+	local with_mode=$1; shift
+	local adver=$1; shift
+
+	local -a speeds_arr
+
+	speeds_arr=($(common_speeds_get $dev1 $dev2 $with_mode $adver))
+	if [[ ${#speeds_arr[@]} < 2 ]]; then
+		check_err 1 "cannot check different speeds. There are not enough speeds"
+	fi
+
+	echo ${speeds_arr[0]} ${speeds_arr[1]}
+}
diff --git a/tools/testing/selftests/net/forwarding/fib_offload_lib.sh b/tools/testing/selftests/net/forwarding/fib_offload_lib.sh
new file mode 100644
index 000000000..66496659b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/fib_offload_lib.sh
@@ -0,0 +1,873 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Various helpers and tests to verify FIB offload.
+
+__fib_trap_check()
+{
+	local ns=$1; shift
+	local family=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+	local ret
+
+	ip -n $ns -j -p -$family route show $route \
+		| jq -e '.[]["flags"] | contains(["trap"])' &> /dev/null
+	ret=$?
+	if [[ $should_fail == "true" ]]; then
+		if [[ $ret -ne 0 ]]; then
+			return 0
+		else
+			return 1
+		fi
+	fi
+
+	return $ret
+}
+
+fib_trap_check()
+{
+	local ns=$1; shift
+	local family=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	busywait 5000 __fib_trap_check $ns $family "$route" $should_fail
+}
+
+fib4_trap_check()
+{
+	local ns=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	fib_trap_check $ns 4 "$route" $should_fail
+}
+
+fib6_trap_check()
+{
+	local ns=$1; shift
+	local route=$1; shift
+	local should_fail=$1; shift
+
+	fib_trap_check $ns 6 "$route" $should_fail
+}
+
+fib_ipv4_identical_routes_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 192.0.2.0/24 dev dummy2 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 tos 0 metric 1024" true
+	check_err $? "Appended route in hardware when should not"
+
+	ip -n $ns route prepend 192.0.2.0/24 dev dummy3 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy3 tos 0 metric 1024" false
+	check_err $? "Prepended route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" true
+	check_err $? "Route was not replaced in hardware by prepended one"
+
+	log_test "IPv4 identical routes"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv4_tos_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 2 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 2 metric 1024" false
+	check_err $? "Highest TOS route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0 metric 1024" true
+	check_err $? "Lowest TOS route still in hardware when should not"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 1 metric 1024" true
+	check_err $? "Middle TOS route in hardware when should not"
+
+	log_test "IPv4 routes with TOS"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_metric_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1022
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1023
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv4 routes with metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replace_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 192.0.2.0/24 dev dummy2 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1025
+	ip -n $ns route replace 192.0.2.0/24 dev dummy2 metric 1025
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy2 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv4 route replace"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv4_delete_test()
+{
+	local ns=$1; shift
+	local metric
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Insert multiple routes with the same prefix and length and varying
+	# metrics. Make sure that throughout delete operations the lowest
+	# metric route is the one in hardware.
+	for metric in $(seq 1024 1026); do
+		ip -n $ns route add 192.0.2.0/24 dev dummy1 metric $metric
+	done
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route del 192.0.2.0/24 dev dummy1 metric 1024
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	ip -n $ns route del 192.0.2.0/24 dev dummy1 metric 1026
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" false
+	check_err $? "Sole route not in hardware when should"
+
+	log_test "IPv4 route delete"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_plen_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Add two routes with the same key and different prefix length and
+	# make sure both are in hardware. It can be verfied that both are
+	# sharing the same leaf by checking the /proc/net/fib_trie
+	ip -n $ns route add 192.0.2.0/24 dev dummy1
+	ip -n $ns route add 192.0.2.0/25 dev dummy1
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1" false
+	check_err $? "/24 not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/25 dev dummy1" false
+	check_err $? "/25 not in hardware when should"
+
+	log_test "IPv4 routes with different prefix length"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_metric_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1024
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 metric 1025
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv4 routes replay - metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_tos_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 0
+	ip -n $ns route add 192.0.2.0/24 dev dummy1 tos 1
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 1" false
+	check_err $? "Highest TOS route not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1 tos 0" true
+	check_err $? "Lowest TOS route in hardware when should not"
+
+	log_test "IPv4 routes replay - TOS"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_replay_plen_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 192.0.2.0/24 dev dummy1
+	ip -n $ns route add 192.0.2.0/25 dev dummy1
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib4_trap_check $ns "192.0.2.0/24 dev dummy1" false
+	check_err $? "/24 not in hardware when should"
+
+	fib4_trap_check $ns "192.0.2.0/25 dev dummy1" false
+	check_err $? "/25 not in hardware when should"
+
+	log_test "IPv4 routes replay - prefix length"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv4_flush_test()
+{
+	local ns=$1; shift
+	local metric
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	# Exercise the routes flushing code paths by inserting various
+	# prefix routes on a netdev and then deleting it.
+	for metric in $(seq 1 20); do
+		ip -n $ns route add 192.0.2.0/24 dev dummy1 metric $metric
+	done
+
+	ip -n $ns link del dev dummy1
+
+	log_test "IPv4 routes flushing"
+}
+
+fib_ipv6_add_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:1::/64 dev dummy2 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" true
+	check_err $? "Route in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after appending route"
+
+	log_test "IPv6 single route add"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_metric_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	ip -n $ns link add name dummy1 type dummy
+	ip -n $ns link set dev dummy1 up
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1022
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1023
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv6 routes with metric"
+
+	ip -n $ns link del dev dummy1
+}
+
+fib_ipv6_append_single_test()
+{
+	local ns=$1; shift
+
+	# When an IPv6 multipath route is added without the 'nexthop' keyword,
+	# different code paths are taken compared to when the keyword is used.
+	# This test tries to verify the former.
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 via 2001:db8:1::2 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 via 2001:db8:2::2 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after appending"
+
+	ip -n $ns route add 2001:db8:10::/64 via 2001:db8:1::2 metric 1025
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not"
+
+	ip -n $ns route append 2001:db8:10::/64 via 2001:db8:2::2 metric 1025
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not after appending"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	log_test "IPv6 append single route without 'nexthop' keyword"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replace_single_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 2001:db8:1::/64 dev dummy2 metric 1024
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1 metric 1025
+	ip -n $ns route replace 2001:db8:1::/64 dev dummy2 metric 1025
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv6 single route replace"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_metric_multipath_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1022 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1022" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1023 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" true
+	check_err $? "Highest metric route still in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1023" true
+	check_err $? "Middle metric route in hardware when should not"
+
+	log_test "IPv6 multipath routes with metric"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_append_multipath_test()
+{
+	local ns=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:2::2 dev dummy2 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after appending"
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:2::2 dev dummy2 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Route in hardware when should not after appending"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+
+	log_test "IPv6 append multipath route with 'nexthop' keyword"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replace_multipath_test()
+{
+	local ns=$1; shift
+	local i
+
+	RET=0
+
+	for i in $(seq 1 3); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route replace 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:3::2 dev dummy3
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Replacement route not in hardware when should"
+
+	# Add a route with an higher metric and make sure that replacing it
+	# does not affect the lower metric one.
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route replace 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:3::2 dev dummy3
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Lowest metric route not in hardware when should"
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Highest metric route in hardware when should not"
+
+	log_test "IPv6 multipath route replace"
+
+	for i in $(seq 1 3); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_append_multipath_to_single_test()
+{
+	local ns=$1; shift
+
+	# Test that when the first route in the leaf is not a multipath route
+	# and we try to append a multipath route with the same metric to it, it
+	# is not notified.
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware when should"
+
+	ip -n $ns route append 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy2 metric 1024" true
+	check_err $? "Route in hardware when should not"
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after append"
+
+	log_test "IPv6 append multipath route to non-multipath route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_delete_single_test()
+{
+	local ns=$1; shift
+
+	# Test various deletion scenarios, where only a single route is
+	# deleted from the FIB node.
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	# Test deletion of a single route when it is the only route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	log_test "IPv6 delete sole single route"
+
+	# Test that deletion of last route does not affect the first one.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1024" false
+	check_err $? "Route not in hardware after deleting higher metric route"
+
+	log_test "IPv6 delete single route not in hardware"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	# Test that first route is replaced by next single route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete single route - replaced by single"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	# Test that first route is replaced by next multipath route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1024
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete single route - replaced by multipath"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	# Test deletion of a single nexthop from a multipath route.
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after deleting a single nexthop"
+
+	log_test "IPv6 delete single nexthop"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_delete_multipath_test()
+{
+	local ns=$1; shift
+
+	# Test various deletion scenarios, where an entire multipath route is
+	# deleted from the FIB node.
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	# Test deletion of a multipath route when it is the only route in the
+	# FIB node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	log_test "IPv6 delete sole multipath route"
+
+	# Test that deletion of last route does not affect the first one.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "Route not in hardware after deleting higher metric route"
+
+	log_test "IPv6 delete multipath route not in hardware"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	# Test that first route is replaced by next single route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 dev dummy1 metric 1025
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 dev dummy1 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete multipath route - replaced by single"
+
+	ip -n $ns route del 2001:db8:10::/64 dev dummy1 metric 1025
+
+	# Test that first route is replaced by next multipath route in the FIB
+	# node.
+	RET=0
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route del 2001:db8:10::/64 metric 1024
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" false
+	check_err $? "Route not in hardware after deleting lowest metric route"
+
+	log_test "IPv6 delete multipath route - replaced by multipath"
+
+	ip -n $ns route del 2001:db8:10::/64 metric 1025
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replay_single_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+	done
+
+	ip -n $ns route add 2001:db8:1::/64 dev dummy1
+	ip -n $ns route append 2001:db8:1::/64 dev dummy2
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy1" false
+	check_err $? "First route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:1::/64 dev dummy2" true
+	check_err $? "Second route in hardware when should not"
+
+	log_test "IPv6 routes replay - single route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
+
+fib_ipv6_replay_multipath_test()
+{
+	local ns=$1; shift
+	local devlink_dev=$1; shift
+
+	RET=0
+
+	for i in $(seq 1 2); do
+		ip -n $ns link add name dummy$i type dummy
+		ip -n $ns link set dev dummy$i up
+		ip -n $ns address add 2001:db8:$i::1/64 dev dummy$i
+	done
+
+	ip -n $ns route add 2001:db8:10::/64 metric 1024 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+	ip -n $ns route add 2001:db8:10::/64 metric 1025 \
+		nexthop via 2001:db8:1::2 dev dummy1 \
+		nexthop via 2001:db8:2::2 dev dummy2
+
+	devlink -N $ns dev reload $devlink_dev
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1024" false
+	check_err $? "First route not in hardware when should"
+
+	fib6_trap_check $ns "2001:db8:10::/64 metric 1025" true
+	check_err $? "Second route in hardware when should not"
+
+	log_test "IPv6 routes replay - multipath route"
+
+	for i in $(seq 1 2); do
+		ip -n $ns link del dev dummy$i
+	done
+}
diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample
new file mode 100644
index 000000000..e51def39f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample
@@ -0,0 +1,45 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Topology description. p1 looped back to p2, p3 to p4 and so on.
+declare -A NETIFS
+
+NETIFS[p1]=veth0
+NETIFS[p2]=veth1
+NETIFS[p3]=veth2
+NETIFS[p4]=veth3
+NETIFS[p5]=veth4
+NETIFS[p6]=veth5
+NETIFS[p7]=veth6
+NETIFS[p8]=veth7
+NETIFS[p9]=veth8
+NETIFS[p10]=veth9
+
+# Port that does not have a cable connected.
+NETIF_NO_CABLE=eth8
+
+##############################################################################
+# Defines
+
+# IPv4 ping utility name
+PING=ping
+# IPv6 ping utility name. Some distributions use 'ping' for IPv6.
+PING6=ping6
+# Packet generator. Some distributions use 'mz'.
+MZ=mausezahn
+# Time to wait after interfaces participating in the test are all UP
+WAIT_TIME=5
+# Whether to pause on failure or not.
+PAUSE_ON_FAIL=no
+# Whether to pause on cleanup or not.
+PAUSE_ON_CLEANUP=no
+# Type of network interface to create
+NETIF_TYPE=veth
+# Whether to create virtual interfaces (veth) or not
+NETIF_CREATE=yes
+# Timeout (in seconds) before ping exits regardless of how many packets have
+# been sent or received
+PING_TIMEOUT=5
+# IPv6 traceroute utility name.
+TROUTE6=traceroute6
diff --git a/tools/testing/selftests/net/forwarding/gre_inner_v4_multipath.sh b/tools/testing/selftests/net/forwarding/gre_inner_v4_multipath.sh
new file mode 100755
index 000000000..e4009f658
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_inner_v4_multipath.sh
@@ -0,0 +1,305 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when there are multiple routes between an IPv4
+# GRE tunnel. The tunnel carries IPv4 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# | 192.0.3.{2-62}/24 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |      192.0.3.1/24                          |
+# |                                            |
+# |  + g1 (gre)                                |
+# |    loc=192.0.2.65                          |
+# |    rem=192.0.2.66 --.                      |
+# |    tos=inherit      |                      |
+# |                     v                      |
+# |                     + $ul1                 |
+# |                     | 192.0.2.129/28       |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# | SW2                 |                      |
+# |               $ul21 +                      |
+# |      192.0.2.130/28                        |
+# |                   |                        |
+# !   ________________|_____                   |
+# |  /                      \                  |
+# |  |                      |                  |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan) |
+# |  | 192.0.2.145/28       | 192.0.2.161/28   |
+# |  |                      |                  |
+# +--|----------------------|------------------+
+#    |                      |
+# +--|----------------------|------------------+
+# |  |                      |                  |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan) |
+# |  | 192.0.2.146/28       | 192.0.2.162/28   |
+# |  |                      |                  |
+# |  \______________________/                  |
+# |                   |                        |
+# |                   |                        |
+# |               $ul31 +                      |
+# |      192.0.2.177/28 |                  SW3 |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# |                     + $ul4                 |
+# |                     ^ 192.0.2.178/28       |
+# |                     |                      |
+# |  + g2 (gre)         |                      |
+# |    loc=192.0.2.66   |                      |
+# |    rem=192.0.2.65 --'                      |
+# |    tos=inherit                             |
+# |                                            |
+# |               $ol4 +                       |
+# |       192.0.4.1/24 |                   SW4 |
+# +--------------------|-----------------------+
+#                      |
+# +--------------------|---------+
+# |                    |         |
+# |                $h2 +         |
+# |  192.0.4.{2-62}/24        H2 |
+# +------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	multipath_ipv4
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.3.2/24
+	ip route add vrf v$h1 192.0.4.0/24 via 192.0.3.1
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.4.0/24 via 192.0.3.1
+	simple_if_fini $h1 192.0.3.2/24
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.3.1/24
+	__simple_if_init $ul1 v$ol1 192.0.2.129/28
+
+	tunnel_create g1 gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	ip route add vrf v$ol1 192.0.4.0/24 nexthop dev g1
+}
+
+sw1_destroy()
+{
+	ip route del vrf v$ol1 192.0.4.0/24
+
+	ip route del vrf v$ol1 192.0.2.66/32
+	__simple_if_fini g1 192.0.2.65/32
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 192.0.2.129/28
+	simple_if_fini $ol1 192.0.3.1/24
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 192.0.2.130/28
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 192.0.2.145/28
+	vlan_create $ul22 222 v$ul21 192.0.2.161/28
+
+	ip route add vrf v$ul21 192.0.2.65/32 via 192.0.2.129
+	ip route add vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 \
+	   nexthop via 192.0.2.162
+}
+
+sw2_destroy()
+{
+	ip route del vrf v$ul21 192.0.2.66/32
+	ip route del vrf v$ul21 192.0.2.65/32
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 192.0.2.130/28
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 192.0.2.177/28
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 192.0.2.146/28
+	vlan_create $ul32 222 v$ul31 192.0.2.162/28
+
+	ip route add vrf v$ul31 192.0.2.66/32 via 192.0.2.178
+	ip route add vrf v$ul31 192.0.2.65/32 \
+	   nexthop via 192.0.2.145 \
+	   nexthop via 192.0.2.161
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip route del vrf v$ul31 192.0.2.65/32
+	ip route del vrf v$ul31 192.0.2.66/32
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 192.0.2.177/28
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 192.0.4.1/24
+	__simple_if_init $ul4 v$ol4 192.0.2.178/28
+
+	tunnel_create g2 gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 192.0.2.66/32
+	ip route add vrf v$ol4 192.0.2.65/32 via 192.0.2.177
+
+	ip route add vrf v$ol4 192.0.3.0/24 nexthop dev g2
+}
+
+sw4_destroy()
+{
+	ip route del vrf v$ol4 192.0.3.0/24
+
+	ip route del vrf v$ol4 192.0.2.65/32
+	__simple_if_fini g2 192.0.2.66/32
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 192.0.2.178/28
+	simple_if_fini $ol4 192.0.4.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.4.2/24
+	ip route add vrf v$h2 192.0.3.0/24 via 192.0.4.1
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.3.0/24 via 192.0.4.1
+	simple_if_fini $h2 192.0.4.2/24
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 2
+	ip route replace vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 weight $weight1 \
+	   nexthop via 192.0.2.162 weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A "192.0.3.2-192.0.3.62" -B "192.0.4.2-192.0.4.62" \
+	       -d 1msec -c 50 -t udp "sp=1024,dp=1024"
+	sleep 1
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 \
+	   nexthop via 192.0.2.162
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.4.2
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 over GRE over IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/gre_inner_v6_multipath.sh b/tools/testing/selftests/net/forwarding/gre_inner_v6_multipath.sh
new file mode 100755
index 000000000..e449475c4
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_inner_v6_multipath.sh
@@ -0,0 +1,306 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when there are multiple routes between an IPv4
+# GRE tunnel. The tunnel carries IPv6 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |  2001:db8:1::2/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |  2001:db8:1::1/64                          |
+# |                                            |
+# |  + g1 (gre)                                |
+# |    loc=192.0.2.65                          |
+# |    rem=192.0.2.66 --.                      |
+# |    tos=inherit      |                      |
+# |                     v                      |
+# |                     + $ul1                 |
+# |                     | 192.0.2.129/28       |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# | SW2                 |                      |
+# |               $ul21 +                      |
+# |      192.0.2.130/28                        |
+# |                   |                        |
+# !   ________________|_____                   |
+# |  /                      \                  |
+# |  |                      |                  |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan) |
+# |  | 192.0.2.145/28       | 192.0.2.161/28   |
+# |  |                      |                  |
+# +--|----------------------|------------------+
+#    |                      |
+# +--|----------------------|------------------+
+# |  |                      |                  |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan) |
+# |  | 192.0.2.146/28       | 192.0.2.162/28   |
+# |  |                      |                  |
+# |  \______________________/                  |
+# |                   |                        |
+# |                   |                        |
+# |               $ul31 +                      |
+# |      192.0.2.177/28 |                  SW3 |
+# +---------------------|----------------------+
+#                       |
+# +---------------------|----------------------+
+# |                     + $ul4                 |
+# |                     ^ 192.0.2.178/28       |
+# |                     |                      |
+# |  + g2 (gre)         |                      |
+# |    loc=192.0.2.66   |                      |
+# |    rem=192.0.2.65 --'                      |
+# |    tos=inherit                             |
+# |                                            |
+# |               $ol4 +                       |
+# |   2001:db8:2::1/64 |                   SW4 |
+# +--------------------|-----------------------+
+#                      |
+# +--------------------|---------+
+# |                    |         |
+# |                $h2 +         |
+# |   2001:db8:2::2/64        H2 |
+# +------------------------------+
+
+ALL_TESTS="
+	ping_ipv6
+	multipath_ipv6
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:db8:1::2/64
+	ip -6 route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::1
+	simple_if_fini $h1 2001:db8:1::2/64
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 2001:db8:1::1/64
+	__simple_if_init $ul1 v$ol1 192.0.2.129/28
+
+	tunnel_create g1 gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	ip -6 route add vrf v$ol1 2001:db8:2::/64 dev g1
+}
+
+sw1_destroy()
+{
+	ip -6 route del vrf v$ol1 2001:db8:2::/64
+
+	ip route del vrf v$ol1 192.0.2.66/32
+	__simple_if_fini g1 192.0.2.65/32
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 192.0.2.129/28
+	simple_if_fini $ol1 2001:db8:1::1/64
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 192.0.2.130/28
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 192.0.2.145/28
+	vlan_create $ul22 222 v$ul21 192.0.2.161/28
+
+	ip route add vrf v$ul21 192.0.2.65/32 via 192.0.2.129
+	ip route add vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 \
+	   nexthop via 192.0.2.162
+}
+
+sw2_destroy()
+{
+	ip route del vrf v$ul21 192.0.2.66/32
+	ip route del vrf v$ul21 192.0.2.65/32
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 192.0.2.130/28
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 192.0.2.177/28
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 192.0.2.146/28
+	vlan_create $ul32 222 v$ul31 192.0.2.162/28
+
+	ip route add vrf v$ul31 192.0.2.66/32 via 192.0.2.178
+	ip route add vrf v$ul31 192.0.2.65/32 \
+	   nexthop via 192.0.2.145 \
+	   nexthop via 192.0.2.161
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip route del vrf v$ul31 192.0.2.65/32
+	ip route del vrf v$ul31 192.0.2.66/32
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 192.0.2.177/28
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 2001:db8:2::1/64
+	__simple_if_init $ul4 v$ol4 192.0.2.178/28
+
+	tunnel_create g2 gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 192.0.2.66/32
+	ip route add vrf v$ol4 192.0.2.65/32 via 192.0.2.177
+
+	ip -6 route add vrf v$ol4 2001:db8:1::/64 dev g2
+}
+
+sw4_destroy()
+{
+	ip -6 route del vrf v$ol4 2001:db8:1::/64
+
+	ip route del vrf v$ol4 192.0.2.65/32
+	__simple_if_fini g2 192.0.2.66/32
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 192.0.2.178/28
+	simple_if_fini $ol4 2001:db8:2::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:db8:2::2/64
+	ip -6 route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+	simple_if_fini $h2 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath6_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 2
+	ip route replace vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 weight $weight1 \
+	   nexthop via 192.0.2.162 weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -6 -q -p 64 -A "2001:db8:1::2-2001:db8:1::1e" \
+	       -B "2001:db8:2::2-2001:db8:2::1e" \
+	       -d 1msec -c 50 -t udp "sp=1024,dp=1024"
+	sleep 1
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ul21 192.0.2.66/32 \
+	   nexthop via 192.0.2.146 \
+	   nexthop via 192.0.2.162
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+ping_ipv6()
+{
+	ping_test $h1 2001:db8:2::2
+}
+
+multipath_ipv6()
+{
+	log_info "Running IPv6 over GRE over IPv4 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh
new file mode 100755
index 000000000..a8d8e8b3d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh
@@ -0,0 +1,257 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when a wECMP route forwards traffic to two GRE
+# tunnels.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |      192.0.2.1/28 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |      192.0.2.2/28                          |
+# |                                            |
+# |  + g1a (gre)          + g1b (gre)          |
+# |    loc=192.0.2.65       loc=192.0.2.81     |
+# |    rem=192.0.2.66 --.   rem=192.0.2.82 --. |
+# |    tos=inherit      |   tos=inherit      | |
+# |  .------------------'                    | |
+# |  |                    .------------------' |
+# |  v                    v                    |
+# |  + $ul1.111 (vlan)    + $ul1.222 (vlan)    |
+# |  | 192.0.2.129/28     | 192.0.2.145/28     |
+# |   \                  /                     |
+# |    \________________/                      |
+# |            |                               |
+# |            + $ul1                          |
+# +------------|-------------------------------+
+#              |
+# +------------|-------------------------------+
+# | SW2        + $ul2                          |
+# |     _______|________                       |
+# |    /                \                      |
+# |   /                  \                     |
+# |  + $ul2.111 (vlan)    + $ul2.222 (vlan)    |
+# |  ^ 192.0.2.130/28     ^ 192.0.2.146/28     |
+# |  |                    |                    |
+# |  |                    '------------------. |
+# |  '------------------.                    | |
+# |  + g2a (gre)        | + g2b (gre)        | |
+# |    loc=192.0.2.66   |   loc=192.0.2.82   | |
+# |    rem=192.0.2.65 --'   rem=192.0.2.81 --' |
+# |    tos=inherit          tos=inherit        |
+# |                                            |
+# |              $ol2 +                        |
+# |     192.0.2.17/28 |                        |
+# +-------------------|------------------------+
+#                     |
+# +-------------------|-----+
+# | H2                |     |
+# |               $h2 +     |
+# |     192.0.2.18/28       |
+# +-------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	multipath_ipv4
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.2.2/28
+	__simple_if_init $ul1 v$ol1
+	vlan_create $ul1 111 v$ol1 192.0.2.129/28
+	vlan_create $ul1 222 v$ol1 192.0.2.145/28
+
+	tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1a v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1
+	__simple_if_init g1b v$ol1 192.0.2.81/32
+	ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+
+	ip route add vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a \
+	   nexthop dev g1b
+}
+
+sw1_destroy()
+{
+	ip route del vrf v$ol1 192.0.2.16/28
+
+	ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+	__simple_if_fini g1b 192.0.2.81/32
+	tunnel_destroy g1b
+
+	ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+	__simple_if_fini g1a 192.0.2.65/32
+	tunnel_destroy g1a
+
+	vlan_destroy $ul1 222
+	vlan_destroy $ul1 111
+	__simple_if_fini $ul1
+	simple_if_fini $ol1 192.0.2.2/28
+}
+
+sw2_create()
+{
+	simple_if_init $ol2 192.0.2.17/28
+	__simple_if_init $ul2 v$ol2
+	vlan_create $ul2 111 v$ol2 192.0.2.130/28
+	vlan_create $ul2 222 v$ol2 192.0.2.146/28
+
+	tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2
+	__simple_if_init g2a v$ol2 192.0.2.66/32
+	ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+
+	tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2
+	__simple_if_init g2b v$ol2 192.0.2.82/32
+	ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+
+	ip route add vrf v$ol2 192.0.2.0/28 \
+	   nexthop dev g2a \
+	   nexthop dev g2b
+
+	tc qdisc add dev $ul2 clsact
+	tc filter add dev $ul2 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul2 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw2_destroy()
+{
+	tc qdisc del dev $ul2 clsact
+
+	ip route del vrf v$ol2 192.0.2.0/28
+
+	ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+	__simple_if_fini g2b 192.0.2.82/32
+	tunnel_destroy g2b
+
+	ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	__simple_if_fini g2a 192.0.2.66/32
+	tunnel_destroy g2a
+
+	vlan_destroy $ul2 222
+	vlan_destroy $ul2 111
+	__simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	simple_if_fini $h2 192.0.2.18/28
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 1
+	ip route replace vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a weight $weight1 \
+	   nexthop dev g1b weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+	local t1_111=$(tc_rule_stats_get $ul2 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul2 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a \
+	   nexthop dev g1b
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.18
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh b/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh
new file mode 100755
index 000000000..9f5b3e2e5
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6_forward_instats_vrf.sh
@@ -0,0 +1,172 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test ipv6 stats on the incoming if when forwarding with VRF
+
+ALL_TESTS="
+	ipv6_ping
+	ipv6_in_too_big_err
+	ipv6_in_hdr_err
+	ipv6_in_addr_err
+	ipv6_in_discard
+"
+
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:1:1::2/64
+	ip -6 route add vrf v$h1 2001:1:2::/64 via 2001:1:1::1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 2001:1:2::/64 via 2001:1:1::1
+	simple_if_fini $h1 2001:1:1::2/64
+}
+
+router_create()
+{
+	vrf_create router
+	__simple_if_init $rtr1 router 2001:1:1::1/64
+	__simple_if_init $rtr2 router 2001:1:2::1/64
+	mtu_set $rtr2 1280
+}
+
+router_destroy()
+{
+	mtu_restore $rtr2
+	__simple_if_fini $rtr2 2001:1:2::1/64
+	__simple_if_fini $rtr1 2001:1:1::1/64
+	vrf_destroy router
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:1:2::2/64
+	ip -6 route add vrf v$h2 2001:1:1::/64 via 2001:1:2::1
+	mtu_set $h2 1280
+}
+
+h2_destroy()
+{
+	mtu_restore $h2
+	ip -6 route del vrf v$h2 2001:1:1::/64 via 2001:1:2::1
+	simple_if_fini $h2 2001:1:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rtr1=${NETIFS[p2]}
+
+	rtr2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+	h1_create
+	router_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	router_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ipv6_in_too_big_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InTooBigErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Send too big packets
+	ip vrf exec $vrf_name \
+		$PING6 -s 1300 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InTooBigErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InTooBigErrors"
+}
+
+ipv6_in_hdr_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InHdrErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Send packets with hop limit 1, easiest with traceroute6 as some ping6
+	# doesn't allow hop limit to be specified
+	ip vrf exec $vrf_name \
+		$TROUTE6 2001:1:2::2 &> /dev/null
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InHdrErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InHdrErrors"
+}
+
+ipv6_in_addr_err()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InAddrErrors)
+	local vrf_name=$(master_name_get $h1)
+
+	# Disable forwarding temporary while sending the packet
+	sysctl -qw net.ipv6.conf.all.forwarding=0
+	ip vrf exec $vrf_name \
+		$PING6 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+	sysctl -qw net.ipv6.conf.all.forwarding=1
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InAddrErrors)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InAddrErrors"
+}
+
+ipv6_in_discard()
+{
+	RET=0
+
+	local t0=$(ipv6_stats_get $rtr1 Ip6InDiscards)
+	local vrf_name=$(master_name_get $h1)
+
+	# Add a policy to discard
+	ip xfrm policy add dst 2001:1:2::2/128 dir fwd action block
+	ip vrf exec $vrf_name \
+		$PING6 2001:1:2::2 -c 1 -w $PING_TIMEOUT &> /dev/null
+	ip xfrm policy del dst 2001:1:2::2/128 dir fwd
+
+	local t1=$(ipv6_stats_get $rtr1 Ip6InDiscards)
+	test "$((t1 - t0))" -ne 0
+	check_err $?
+	log_test "Ip6InDiscards"
+}
+ipv6_ping()
+{
+	RET=0
+
+	ping6_test $h1 2001:1:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_inner_v4_multipath.sh b/tools/testing/selftests/net/forwarding/ip6gre_inner_v4_multipath.sh
new file mode 100755
index 000000000..a257979d3
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_inner_v4_multipath.sh
@@ -0,0 +1,304 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when there are multiple routes between an IPv6
+# GRE tunnel. The tunnel carries IPv4 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# | 192.0.3.{2-62}/24 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-------------------------+
+# | SW1               |                         |
+# |              $ol1 +                         |
+# |      192.0.3.1/24                           |
+# |                                             |
+# |  + g1 (gre)                                 |
+# |    loc=2001:db8:40::1                       |
+# |    rem=2001:db8:40::2 --.                   |
+# |    tos=inherit          |                   |
+# |                         v                   |
+# |                         + $ul1              |
+# |                         | 2001:db8:80::1/64 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|-------------------+
+# | SW2                     |                   |
+# |                   $ul21 +                   |
+# |       2001:db8:80::2/64                     |
+# |                   |                         |
+# !   ________________|_____                    |
+# |  /                      \                   |
+# |  |                      |                   |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan)  |
+# |  | 2001:db8:81::1/64    | 2001:db8:82::1/64 |
+# |  |                      |                   |
+# +--|----------------------|-------------------+
+#    |                      |
+# +--|----------------------|-------------------+
+# |  |                      |                   |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan)  |
+# |  | 2001:db8:81::2/64    | 2001:db8:82::2/64 |
+# |  |                      |                   |
+# |  \______________________/                   |
+# |                   |                         |
+# |                   |                         |
+# |                   $ul31 +                   |
+# |       2001:db8:83::2/64 |               SW3 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|-------------------+
+# |                         + $ul4              |
+# |                         ^ 2001:db8:83::1/64 |
+# |  + g2 (gre)             |                   |
+# |    loc=2001:db8:40::2   |                   |
+# |    rem=2001:db8:40::1 --'                   |
+# |    tos=inherit                              |
+# |                                             |
+# |               $ol4 +                        |
+# |       192.0.4.1/24 |                    SW4 |
+# +--------------------|------------------------+
+#                      |
+# +--------------------|---------+
+# |                    |         |
+# |                $h2 +         |
+# |  192.0.4.{2-62}/24        H2 |
+# +------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	multipath_ipv4
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.3.2/24
+	ip route add vrf v$h1 192.0.4.0/24 via 192.0.3.1
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.4.0/24 via 192.0.3.1
+	simple_if_fini $h1 192.0.3.2/24
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.3.1/24
+	__simple_if_init $ul1 v$ol1 2001:db8:80::1/64
+
+	tunnel_create g1 ip6gre 2001:db8:40::1 2001:db8:40::2 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 2001:db8:40::1/128
+	ip -6 route add vrf v$ol1 2001:db8:40::2/128 via 2001:db8:80::2
+
+	ip route add vrf v$ol1 192.0.4.0/24 nexthop dev g1
+}
+
+sw1_destroy()
+{
+	ip route del vrf v$ol1 192.0.4.0/24
+
+	ip -6 route del vrf v$ol1 2001:db8:40::2/128
+	__simple_if_fini g1 2001:db8:40::1/128
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 2001:db8:80::1/64
+	simple_if_fini $ol1 192.0.3.1/24
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 2001:db8:80::2/64
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 2001:db8:81::1/64
+	vlan_create $ul22 222 v$ul21 2001:db8:82::1/64
+
+	ip -6 route add vrf v$ul21 2001:db8:40::1/128 via 2001:db8:80::1
+	ip -6 route add vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 \
+	   nexthop via 2001:db8:82::2
+}
+
+sw2_destroy()
+{
+	ip -6 route del vrf v$ul21 2001:db8:40::2/128
+	ip -6 route del vrf v$ul21 2001:db8:40::1/128
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 2001:db8:80::2/64
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 2001:db8:83::2/64
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 2001:db8:81::2/64
+	vlan_create $ul32 222 v$ul31 2001:db8:82::2/64
+
+	ip -6 route add vrf v$ul31 2001:db8:40::2/128 via 2001:db8:83::1
+	ip -6 route add vrf v$ul31 2001:db8:40::1/128 \
+	   nexthop via 2001:db8:81::1 \
+	   nexthop via 2001:db8:82::1
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip -6 route del vrf v$ul31 2001:db8:40::1/128
+	ip -6 route del vrf v$ul31 2001:db8:40::2/128
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 2001:Db8:83::2/64
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 192.0.4.1/24
+	__simple_if_init $ul4 v$ol4 2001:db8:83::1/64
+
+	tunnel_create g2 ip6gre 2001:db8:40::2 2001:db8:40::1 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 2001:db8:40::2/128
+	ip -6 route add vrf v$ol4 2001:db8:40::1/128 via 2001:db8:83::2
+
+	ip route add vrf v$ol4 192.0.3.0/24 nexthop dev g2
+}
+
+sw4_destroy()
+{
+	ip route del vrf v$ol4 192.0.3.0/24
+
+	ip -6 route del vrf v$ol4 2001:db8:40::1/128
+	__simple_if_fini g2 2001:db8:40::2/128
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 2001:db8:83::1/64
+	simple_if_fini $ol4 192.0.4.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.4.2/24
+	ip route add vrf v$h2 192.0.3.0/24 via 192.0.4.1
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.3.0/24 via 192.0.4.1
+	simple_if_fini $h2 192.0.4.2/24
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 2
+	ip route replace vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 weight $weight1 \
+	   nexthop via 2001:db8:82::2 weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A "192.0.3.2-192.0.3.62" -B "192.0.4.2-192.0.4.62" \
+	       -d 1msec -c 50 -t udp "sp=1024,dp=1024"
+	sleep 1
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 \
+	   nexthop via 2001:db8:82::2
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.4.2
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 over GRE over IPv6 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ip6gre_inner_v6_multipath.sh b/tools/testing/selftests/net/forwarding/ip6gre_inner_v6_multipath.sh
new file mode 100755
index 000000000..d208f5243
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ip6gre_inner_v6_multipath.sh
@@ -0,0 +1,305 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when there are multiple routes between an IPv6
+# GRE tunnel. The tunnel carries IPv6 traffic between multiple hosts.
+# Multiple routes are in the underlay network. With the default multipath
+# policy, SW2 will only look at the outer IP addresses, hence only a single
+# route would be used.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |  2001:db8:1::2/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-------------------------+
+# | SW1               |                         |
+# |              $ol1 +                         |
+# |  2001:db8:1::1/64                           |
+# |                                             |
+# |  + g1 (gre)                                 |
+# |    loc=2001:db8:40::1                       |
+# |    rem=2001:db8:40::2 --.                   |
+# |    tos=inherit          |                   |
+# |                         v                   |
+# |                         + $ul1              |
+# |                         | 2001:db8:80::1/64 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|-------------------+
+# | SW2                     |                   |
+# |                   $ul21 +                   |
+# |       2001:db8:80::2/64                     |
+# |                   |                         |
+# !   ________________|_____                    |
+# |  /                      \                   |
+# |  |                      |                   |
+# |  + $ul22.111 (vlan)     + $ul22.222 (vlan)  |
+# |  | 2001:db8:81::1/64    | 2001:db8:82::1/64 |
+# |  |                      |                   |
+# +--|----------------------|-------------------+
+#    |                      |
+# +--|----------------------|-------------------+
+# |  |                      |                   |
+# |  + $ul32.111 (vlan)     + $ul32.222 (vlan)  |
+# |  | 2001:db8:81::2/64    | 2001:db8:82::2/64 |
+# |  |                      |                   |
+# |  \______________________/                   |
+# |                   |                         |
+# |                   |                         |
+# |                   $ul31 +                   |
+# |       2001:db8:83::2/64 |               SW3 |
+# +-------------------------|-------------------+
+#                           |
+# +-------------------------|-------------------+
+# |                         + $ul4              |
+# |                         ^ 2001:db8:83::1/64 |
+# |  + g2 (gre)             |                   |
+# |    loc=2001:db8:40::2   |                   |
+# |    rem=2001:db8:40::1 --'                   |
+# |    tos=inherit                              |
+# |                                             |
+# |               $ol4 +                        |
+# |   2001:db8:2::1/64 |                    SW4 |
+# +--------------------|------------------------+
+#                      |
+# +--------------------|---------+
+# |                    |         |
+# |                $h2 +         |
+# |   2001:db8:2::2/64        H2 |
+# +------------------------------+
+
+ALL_TESTS="
+	ping_ipv6
+	multipath_ipv6
+"
+
+NUM_NETIFS=10
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:db8:1::2/64
+	ip -6 route add vrf v$h1 2001:db8:2::/64 via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip -6 route del vrf v$h1 2001:db8:2::/64 via 2001:db8:1::1
+	simple_if_fini $h1 2001:db8:1::2/64
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 2001:db8:1::1/64
+	__simple_if_init $ul1 v$ol1 2001:db8:80::1/64
+
+	tunnel_create g1 ip6gre 2001:db8:40::1 2001:db8:40::2 tos inherit dev v$ol1
+	__simple_if_init g1 v$ol1 2001:db8:40::1/128
+	ip -6 route add vrf v$ol1 2001:db8:40::2/128 via 2001:db8:80::2
+
+	ip -6 route add vrf v$ol1 2001:db8:2::/64 dev g1
+}
+
+sw1_destroy()
+{
+	ip -6 route del vrf v$ol1 2001:db8:2::/64
+
+	ip -6 route del vrf v$ol1 2001:db8:40::2/128
+	__simple_if_fini g1 2001:db8:40::1/128
+	tunnel_destroy g1
+
+	__simple_if_fini $ul1 2001:db8:80::1/64
+	simple_if_fini $ol1 2001:db8:1::1/64
+}
+
+sw2_create()
+{
+	simple_if_init $ul21 2001:db8:80::2/64
+	__simple_if_init $ul22 v$ul21
+	vlan_create $ul22 111 v$ul21 2001:db8:81::1/64
+	vlan_create $ul22 222 v$ul21 2001:db8:82::1/64
+
+	ip -6 route add vrf v$ul21 2001:db8:40::1/128 via 2001:db8:80::1
+	ip -6 route add vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 \
+	   nexthop via 2001:db8:82::2
+}
+
+sw2_destroy()
+{
+	ip -6 route del vrf v$ul21 2001:db8:40::2/128
+	ip -6 route del vrf v$ul21 2001:db8:40::1/128
+
+	vlan_destroy $ul22 222
+	vlan_destroy $ul22 111
+	__simple_if_fini $ul22
+	simple_if_fini $ul21 2001:db8:80::2/64
+}
+
+sw3_create()
+{
+	simple_if_init $ul31 2001:db8:83::2/64
+	__simple_if_init $ul32 v$ul31
+	vlan_create $ul32 111 v$ul31 2001:db8:81::2/64
+	vlan_create $ul32 222 v$ul31 2001:db8:82::2/64
+
+	ip -6 route add vrf v$ul31 2001:db8:40::2/128 via 2001:db8:83::1
+	ip -6 route add vrf v$ul31 2001:db8:40::1/128 \
+	   nexthop via 2001:db8:81::1 \
+	   nexthop via 2001:db8:82::1
+
+	tc qdisc add dev $ul32 clsact
+	tc filter add dev $ul32 ingress pref 111 prot 802.1Q \
+	   flower vlan_id 111 action pass
+	tc filter add dev $ul32 ingress pref 222 prot 802.1Q \
+	   flower vlan_id 222 action pass
+}
+
+sw3_destroy()
+{
+	tc qdisc del dev $ul32 clsact
+
+	ip -6 route del vrf v$ul31 2001:db8:40::1/128
+	ip -6 route del vrf v$ul31 2001:db8:40::2/128
+
+	vlan_destroy $ul32 222
+	vlan_destroy $ul32 111
+	__simple_if_fini $ul32
+	simple_if_fini $ul31 2001:Db8:83::2/64
+}
+
+sw4_create()
+{
+	simple_if_init $ol4 2001:db8:2::1/64
+	__simple_if_init $ul4 v$ol4 2001:db8:83::1/64
+
+	tunnel_create g2 ip6gre 2001:db8:40::2 2001:db8:40::1 tos inherit dev v$ol4
+	__simple_if_init g2 v$ol4 2001:db8:40::2/128
+	ip -6 route add vrf v$ol4 2001:db8:40::1/128 via 2001:db8:83::2
+
+	ip -6 route add vrf v$ol4 2001:db8:1::/64 dev g2
+}
+
+sw4_destroy()
+{
+	ip -6 route del vrf v$ol4 2001:db8:1::/64
+
+	ip -6 route del vrf v$ol4 2001:db8:40::1/128
+	__simple_if_fini g2 2001:db8:40::2/128
+	tunnel_destroy g2
+
+	__simple_if_fini $ul4 2001:db8:83::1/64
+	simple_if_fini $ol4 2001:db8:2::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 2001:db8:2::2/64
+	ip -6 route add vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del vrf v$h2 2001:db8:1::/64 via 2001:db8:2::1
+	simple_if_fini $h2 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+
+	ol1=${NETIFS[p2]}
+	ul1=${NETIFS[p3]}
+
+	ul21=${NETIFS[p4]}
+	ul22=${NETIFS[p5]}
+
+	ul32=${NETIFS[p6]}
+	ul31=${NETIFS[p7]}
+
+	ul4=${NETIFS[p8]}
+	ol4=${NETIFS[p9]}
+
+	h2=${NETIFS[p10]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	sw3_create
+	sw4_create
+	h2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	h2_destroy
+	sw4_destroy
+	sw3_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath6_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv6.fib_multipath_hash_policy 2
+	ip route replace vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 weight $weight1 \
+	   nexthop via 2001:db8:82::2 weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t0_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -6 -q -p 64 -A "2001:db8:1::2-2001:db8:1::1e" \
+	       -B "2001:db8:2::2-2001:db8:2::1e" \
+	       -d 1msec -c 50 -t udp "sp=1024,dp=1024"
+	sleep 1
+
+	local t1_111=$(tc_rule_stats_get $ul32 111 ingress)
+	local t1_222=$(tc_rule_stats_get $ul32 222 ingress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ul21 2001:db8:40::2/128 \
+	   nexthop via 2001:db8:81::2 \
+	   nexthop via 2001:db8:82::2
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+ping_ipv6()
+{
+	ping_test $h1 2001:db8:2::2
+}
+
+multipath_ipv6()
+{
+	log_info "Running IPv6 over GRE over IPv6 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_flat_gre.sh b/tools/testing/selftests/net/forwarding/ipip_flat_gre.sh
new file mode 100755
index 000000000..abb694397
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_flat_gre.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel without key.
+# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more
+# details.
+
+ALL_TESTS="gre_flat4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create gre $ol1 $ul1
+	sw2_flat_create gre $ol2 $ul2
+}
+
+gre_flat4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre flat"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_flat_gre_key.sh b/tools/testing/selftests/net/forwarding/ipip_flat_gre_key.sh
new file mode 100755
index 000000000..c4f373337
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_flat_gre_key.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel with key.
+# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more
+# details.
+
+ALL_TESTS="gre_flat4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create gre $ol1 $ul1 key 233
+	sw2_flat_create gre $ol2 $ul2 key 233
+}
+
+gre_flat4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre flat with key"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change	gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_flat_gre_keys.sh b/tools/testing/selftests/net/forwarding/ipip_flat_gre_keys.sh
new file mode 100755
index 000000000..a811130c0
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_flat_gre_keys.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnel with key.
+# This test uses flat topology for IP tunneling tests. See ipip_lib.sh for more
+# details.
+
+ALL_TESTS="gre_flat4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_flat_create gre $ol1 $ul1 ikey 111 okey 222
+	sw2_flat_create gre $ol2 $ul2 ikey 222 okey 111
+}
+
+gre_flat4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre flat with ikey/okey"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change	gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_flat_destroy $ol2 $ul2
+	sw1_flat_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_hier_gre.sh b/tools/testing/selftests/net/forwarding/ipip_hier_gre.sh
new file mode 100755
index 000000000..05c5b3cf2
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_hier_gre.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ipip_lib.sh for more details.
+
+ALL_TESTS="gre_hier4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create gre $ol1 $ul1
+	sw2_hierarchical_create gre $ol2 $ul2
+}
+
+gre_hier4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre hierarchical"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_hier_gre_key.sh b/tools/testing/selftests/net/forwarding/ipip_hier_gre_key.sh
new file mode 100755
index 000000000..9b105dbca
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_hier_gre_key.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ipip_lib.sh for more details.
+
+ALL_TESTS="gre_hier4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create gre $ol1 $ul1 key 22
+	sw2_hierarchical_create gre $ol2 $ul2 key 22
+}
+
+gre_hier4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre hierarchical with key"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_hier_gre_keys.sh b/tools/testing/selftests/net/forwarding/ipip_hier_gre_keys.sh
new file mode 100755
index 000000000..e275d25bd
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_hier_gre_keys.sh
@@ -0,0 +1,63 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test IP-in-IP GRE tunnels without key.
+# This test uses hierarchical topology for IP tunneling tests. See
+# ipip_lib.sh for more details.
+
+ALL_TESTS="gre_hier4 gre_mtu_change"
+
+NUM_NETIFS=6
+source lib.sh
+source ipip_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	h2_create
+	sw1_hierarchical_create gre $ol1 $ul1 ikey 111 okey 222
+	sw2_hierarchical_create gre $ol2 $ul2 ikey 222 okey 111
+}
+
+gre_hier4()
+{
+	RET=0
+
+	ping_test $h1 192.0.2.18 " gre hierarchical with ikey/okey"
+}
+
+gre_mtu_change()
+{
+	test_mtu_change gre
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	sw2_hierarchical_destroy $ol2 $ul2
+	sw1_hierarchical_destroy $ol1 $ul1
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/ipip_lib.sh b/tools/testing/selftests/net/forwarding/ipip_lib.sh
new file mode 100644
index 000000000..30f36a57b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/ipip_lib.sh
@@ -0,0 +1,349 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Handles creation and destruction of IP-in-IP or GRE tunnels over the given
+# topology. Supports both flat and hierarchical models.
+#
+# Flat Model:
+# Overlay and underlay share the same VRF.
+# SW1 uses default VRF so tunnel has no bound dev.
+# SW2 uses non-default VRF tunnel has a bound dev.
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |      192.0.2.1/28 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-----+
+# | SW1               |     |
+# |              $ol1 +     |
+# |      192.0.2.2/28       |
+# |                         |
+# |  + g1a (gre)            |
+# |    loc=192.0.2.65       |
+# |    rem=192.0.2.66 --.   |
+# |    tos=inherit      |   |
+# |  .------------------'   |
+# |  |                      |
+# |  v                      |
+# |  + $ul1.111 (vlan)      |
+# |  | 192.0.2.129/28       |
+# |   \                     |
+# |    \_______             |
+# |            |            |
+# |VRF default + $ul1       |
+# +------------|------------+
+#              |
+# +------------|------------+
+# | SW2        + $ul2       |
+# |     _______|            |
+# |    /                    |
+# |   /                     |
+# |  + $ul2.111 (vlan)      |
+# |  ^ 192.0.2.130/28       |
+# |  |                      |
+# |  |                      |
+# |  '------------------.   |
+# |  + g2a (gre)        |   |
+# |    loc=192.0.2.66   |   |
+# |    rem=192.0.2.65 --'   |
+# |    tos=inherit          |
+# |                         |
+# |              $ol2 +     |
+# |     192.0.2.17/28 |     |
+# | VRF v$ol2         |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-----+
+# | H2                |     |
+# |               $h2 +     |
+# |     192.0.2.18/28       |
+# +-------------------------+
+#
+# Hierarchical model:
+# The tunnel is bound to a device in a different VRF
+#
+# +---------------------------+
+# | H1                        |
+# |               $h1 +       |
+# |      192.0.2.1/28 |       |
+# +-------------------|-------+
+#                     |
+# +-------------------|-------+
+# | SW1               |       |
+# | +-----------------|-----+ |
+# | |            $ol1 +     | |
+# | |     192.0.2.2/28      | |
+# | |                       | |
+# | |    + g1a (gre)        | |
+# | |    rem=192.0.2.66     | |
+# | |    tos=inherit        | |
+# | |    loc=192.0.2.65     | |
+# | |           ^           | |
+# | | VRF v$ol1 |           | |
+# | +-----------|-----------+ |
+# |             |             |
+# | +-----------|-----------+ |
+# | | VRF v$ul1 |           | |
+# | |           |           | |
+# | |           |           | |
+# | |           v           | |
+# | |    dummy1 +           | |
+# | |   192.0.2.65          | |
+# | |   .-------'           | |
+# | |   |                   | |
+# | |   v                   | |
+# | |   + $ul1.111 (vlan)   | |
+# | |   | 192.0.2.129/28    | |
+# | |   \                   | |
+# | |    \_____             | |
+# | |          |            | |
+# | |          + $ul1       | |
+# | +----------|------------+ |
+# +------------|--------------+
+#              |
+# +------------|--------------+
+# | SW2        |              |
+# | +----------|------------+ |
+# | |          + $ul2       | |
+# | |     _____|            | |
+# | |    /                  | |
+# | |   /                   | |
+# | |   | $ul2.111 (vlan)   | |
+# | |   + 192.0.2.130/28    | |
+# | |   ^                   | |
+# | |   |                   | |
+# | |   '-------.           | |
+# | |    dummy2 +           | |
+# | |    192.0.2.66         | |
+# | |           ^           | |
+# | |           |           | |
+# | |           |           | |
+# | | VRF v$ul2 |           | |
+# | +-----------|-----------+ |
+# |             |             |
+# | +-----------|-----------+ |
+# | | VRF v$ol2 |           | |
+# | |           |           | |
+# | |           v           | |
+# | |  g2a (gre)+           | |
+# | |  loc=192.0.2.66       | |
+# | |  rem=192.0.2.65       | |
+# | |  tos=inherit          | |
+# | |                       | |
+# | |            $ol2 +     | |
+# | |   192.0.2.17/28 |     | |
+# | +-----------------|-----+ |
+# +-------------------|-------+
+#                     |
+# +-------------------|-------+
+# | H2                |       |
+# |               $h2 +       |
+# |     192.0.2.18/28         |
+# +---------------------------+
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	simple_if_fini $h2 192.0.2.18/28
+}
+
+sw1_flat_create()
+{
+	local type=$1; shift
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip link set dev $ol1 up
+        __addr_add_del $ol1 add "192.0.2.2/28"
+
+	ip link set dev $ul1 up
+	vlan_create $ul1 111 "" 192.0.2.129/28
+
+	tunnel_create g1a $type 192.0.2.65 192.0.2.66 tos inherit "$@"
+	ip link set dev g1a up
+        __addr_add_del g1a add "192.0.2.65/32"
+
+	ip route add 192.0.2.66/32 via 192.0.2.130
+
+	ip route add 192.0.2.16/28 nexthop dev g1a
+}
+
+sw1_flat_destroy()
+{
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip route del 192.0.2.16/28
+
+	ip route del 192.0.2.66/32 via 192.0.2.130
+	__simple_if_fini g1a 192.0.2.65/32
+	tunnel_destroy g1a
+
+	vlan_destroy $ul1 111
+	__simple_if_fini $ul1
+	__simple_if_fini $ol1 192.0.2.2/28
+}
+
+sw2_flat_create()
+{
+	local type=$1; shift
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	simple_if_init $ol2 192.0.2.17/28
+	__simple_if_init $ul2 v$ol2
+	vlan_create $ul2 111 v$ol2 192.0.2.130/28
+
+	tunnel_create g2a $type 192.0.2.66 192.0.2.65 tos inherit dev v$ol2 \
+		"$@"
+	__simple_if_init g2a v$ol2 192.0.2.66/32
+
+	ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	ip route add vrf v$ol2 192.0.2.0/28 nexthop dev g2a
+}
+
+sw2_flat_destroy()
+{
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	ip route del vrf v$ol2 192.0.2.0/28
+
+	ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	__simple_if_fini g2a 192.0.2.66/32
+	tunnel_destroy g2a
+
+	vlan_destroy $ul2 111
+	__simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28
+}
+
+sw1_hierarchical_create()
+{
+	local type=$1; shift
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	simple_if_init $ol1 192.0.2.2/28
+	simple_if_init $ul1
+	ip link add name dummy1 type dummy
+	__simple_if_init dummy1 v$ul1 192.0.2.65/32
+
+	vlan_create $ul1 111 v$ul1 192.0.2.129/28
+	tunnel_create g1a $type 192.0.2.65 192.0.2.66 tos inherit dev dummy1 \
+		"$@"
+	ip link set dev g1a master v$ol1
+
+	ip route add vrf v$ul1 192.0.2.66/32 via 192.0.2.130
+	ip route add vrf v$ol1 192.0.2.16/28 nexthop dev g1a
+}
+
+sw1_hierarchical_destroy()
+{
+	local ol1=$1; shift
+	local ul1=$1; shift
+
+	ip route del vrf v$ol1 192.0.2.16/28
+	ip route del vrf v$ul1 192.0.2.66/32
+
+	tunnel_destroy g1a
+	vlan_destroy $ul1 111
+
+	__simple_if_fini dummy1 192.0.2.65/32
+	ip link del dev dummy1
+
+	simple_if_fini $ul1
+	simple_if_fini $ol1 192.0.2.2/28
+}
+
+sw2_hierarchical_create()
+{
+	local type=$1; shift
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	simple_if_init $ol2 192.0.2.17/28
+	simple_if_init $ul2
+
+	ip link add name dummy2 type dummy
+	__simple_if_init dummy2 v$ul2 192.0.2.66/32
+
+	vlan_create $ul2 111 v$ul2 192.0.2.130/28
+	tunnel_create g2a $type 192.0.2.66 192.0.2.65 tos inherit dev dummy2 \
+		"$@"
+	ip link set dev g2a master v$ol2
+
+	ip route add vrf v$ul2 192.0.2.65/32 via 192.0.2.129
+	ip route add vrf v$ol2 192.0.2.0/28 nexthop dev g2a
+}
+
+sw2_hierarchical_destroy()
+{
+	local ol2=$1; shift
+	local ul2=$1; shift
+
+	ip route del vrf v$ol2 192.0.2.0/28
+	ip route del vrf v$ul2 192.0.2.65/32
+
+	tunnel_destroy g2a
+	vlan_destroy $ul2 111
+
+	__simple_if_fini dummy2 192.0.2.66/32
+	ip link del dev dummy2
+
+	simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28
+}
+
+topo_mtu_change()
+{
+	local mtu=$1
+
+	ip link set mtu $mtu dev $h1
+	ip link set mtu $mtu dev $ol1
+	ip link set mtu $mtu dev g1a
+	ip link set mtu $mtu dev $ul1
+	ip link set mtu $mtu dev $ul1.111
+	ip link set mtu $mtu dev $h2
+	ip link set mtu $mtu dev $ol2
+	ip link set mtu $mtu dev g2a
+	ip link set mtu $mtu dev $ul2
+	ip link set mtu $mtu dev $ul2.111
+}
+
+test_mtu_change()
+{
+	local encap=$1; shift
+
+	RET=0
+
+	ping_do $h1 192.0.2.18 "-s 1800	-w 3"
+	check_fail $? "ping $encap should not pass with size 1800"
+
+	RET=0
+
+	topo_mtu_change	2000
+	ping_do	$h1 192.0.2.18 "-s 1800	-w 3"
+	check_err $?
+	log_test "ping $encap packet size 1800 after MTU change"
+}
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
new file mode 100644
index 000000000..dfb41db7f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -0,0 +1,1300 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Defines
+
+# Can be overridden by the configuration file.
+PING=${PING:=ping}
+PING6=${PING6:=ping6}
+MZ=${MZ:=mausezahn}
+ARPING=${ARPING:=arping}
+TEAMD=${TEAMD:=teamd}
+WAIT_TIME=${WAIT_TIME:=5}
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
+NETIF_TYPE=${NETIF_TYPE:=veth}
+NETIF_CREATE=${NETIF_CREATE:=yes}
+MCD=${MCD:=smcrouted}
+MC_CLI=${MC_CLI:=smcroutectl}
+PING_TIMEOUT=${PING_TIMEOUT:=5}
+WAIT_TIMEOUT=${WAIT_TIMEOUT:=20}
+INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600}
+
+relative_path="${BASH_SOURCE%/*}"
+if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
+	relative_path="."
+fi
+
+if [[ -f $relative_path/forwarding.config ]]; then
+	source "$relative_path/forwarding.config"
+fi
+
+##############################################################################
+# Sanity checks
+
+check_tc_version()
+{
+	tc -j &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing JSON support"
+		exit 1
+	fi
+}
+
+check_tc_shblock_support()
+{
+	tc filter help 2>&1 | grep block &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing shared block support"
+		exit 1
+	fi
+}
+
+check_tc_chain_support()
+{
+	tc help 2>&1|grep chain &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing chain support"
+		exit 1
+	fi
+}
+
+check_tc_action_hw_stats_support()
+{
+	tc actions help 2>&1 | grep -q hw_stats
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing action hw_stats support"
+		exit 1
+	fi
+}
+
+skip_on_veth()
+{
+	local kind=$(ip -j -d link show dev ${NETIFS[p1]} |
+		jq -r '.[].linkinfo.info_kind')
+
+	if [[ $kind == veth ]]; then
+		echo "SKIP: Test cannot be run with veth pairs"
+		exit $ksft_skip
+	fi
+}
+
+if [[ "$(id -u)" -ne 0 ]]; then
+	echo "SKIP: need root privileges"
+	exit 0
+fi
+
+if [[ "$CHECK_TC" = "yes" ]]; then
+	check_tc_version
+fi
+
+require_command()
+{
+	local cmd=$1; shift
+
+	if [[ ! -x "$(command -v "$cmd")" ]]; then
+		echo "SKIP: $cmd not installed"
+		exit 1
+	fi
+}
+
+require_command jq
+require_command $MZ
+
+if [[ ! -v NUM_NETIFS ]]; then
+	echo "SKIP: importer does not define \"NUM_NETIFS\""
+	exit 1
+fi
+
+##############################################################################
+# Command line options handling
+
+count=0
+
+while [[ $# -gt 0 ]]; do
+	if [[ "$count" -eq "0" ]]; then
+		unset NETIFS
+		declare -A NETIFS
+	fi
+	count=$((count + 1))
+	NETIFS[p$count]="$1"
+	shift
+done
+
+##############################################################################
+# Network interfaces configuration
+
+create_netif_veth()
+{
+	local i
+
+	for ((i = 1; i <= NUM_NETIFS; ++i)); do
+		local j=$((i+1))
+
+		if [ -z ${NETIFS[p$i]} ]; then
+			echo "SKIP: Cannot create interface. Name not specified"
+			exit $ksft_skip
+		fi
+
+		ip link show dev ${NETIFS[p$i]} &> /dev/null
+		if [[ $? -ne 0 ]]; then
+			ip link add ${NETIFS[p$i]} type veth \
+				peer name ${NETIFS[p$j]}
+			if [[ $? -ne 0 ]]; then
+				echo "Failed to create netif"
+				exit 1
+			fi
+		fi
+		i=$j
+	done
+}
+
+create_netif()
+{
+	case "$NETIF_TYPE" in
+	veth) create_netif_veth
+	      ;;
+	*) echo "Can not create interfaces of type \'$NETIF_TYPE\'"
+	   exit 1
+	   ;;
+	esac
+}
+
+if [[ "$NETIF_CREATE" = "yes" ]]; then
+	create_netif
+fi
+
+for ((i = 1; i <= NUM_NETIFS; ++i)); do
+	ip link show dev ${NETIFS[p$i]} &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: could not find all required interfaces"
+		exit 1
+	fi
+done
+
+##############################################################################
+# Helpers
+
+# Exit status to return at the end. Set in case one of the tests fails.
+EXIT_STATUS=0
+# Per-test return value. Clear at the beginning of each test.
+RET=0
+
+check_err()
+{
+	local err=$1
+	local msg=$2
+
+	if [[ $RET -eq 0 && $err -ne 0 ]]; then
+		RET=$err
+		retmsg=$msg
+	fi
+}
+
+check_fail()
+{
+	local err=$1
+	local msg=$2
+
+	if [[ $RET -eq 0 && $err -eq 0 ]]; then
+		RET=1
+		retmsg=$msg
+	fi
+}
+
+check_err_fail()
+{
+	local should_fail=$1; shift
+	local err=$1; shift
+	local what=$1; shift
+
+	if ((should_fail)); then
+		check_fail $err "$what succeeded, but should have failed"
+	else
+		check_err $err "$what failed"
+	fi
+}
+
+log_test()
+{
+	local test_name=$1
+	local opt_str=$2
+
+	if [[ $# -eq 2 ]]; then
+		opt_str="($opt_str)"
+	fi
+
+	if [[ $RET -ne 0 ]]; then
+		EXIT_STATUS=1
+		printf "TEST: %-60s  [FAIL]\n" "$test_name $opt_str"
+		if [[ ! -z "$retmsg" ]]; then
+			printf "\t%s\n" "$retmsg"
+		fi
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo "Hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+		return 1
+	fi
+
+	printf "TEST: %-60s  [ OK ]\n" "$test_name $opt_str"
+	return 0
+}
+
+log_info()
+{
+	local msg=$1
+
+	echo "INFO: $msg"
+}
+
+busywait()
+{
+	local timeout=$1; shift
+
+	local start_time="$(date -u +%s%3N)"
+	while true
+	do
+		local out
+		out=$("$@")
+		local ret=$?
+		if ((!ret)); then
+			echo -n "$out"
+			return 0
+		fi
+
+		local current_time="$(date -u +%s%3N)"
+		if ((current_time - start_time > timeout)); then
+			echo -n "$out"
+			return 1
+		fi
+	done
+}
+
+not()
+{
+	"$@"
+	[[ $? != 0 ]]
+}
+
+grep_bridge_fdb()
+{
+	local addr=$1; shift
+	local word
+	local flag
+
+	if [ "$1" == "self" ] || [ "$1" == "master" ]; then
+		word=$1; shift
+		if [ "$1" == "-v" ]; then
+			flag=$1; shift
+		fi
+	fi
+
+	$@ | grep $addr | grep $flag "$word"
+}
+
+wait_for_offload()
+{
+	"$@" | grep -q offload
+}
+
+until_counter_is()
+{
+	local expr=$1; shift
+	local current=$("$@")
+
+	echo $((current))
+	((current $expr))
+}
+
+busywait_for_counter()
+{
+	local timeout=$1; shift
+	local delta=$1; shift
+
+	local base=$("$@")
+	busywait "$timeout" until_counter_is ">= $((base + delta))" "$@"
+}
+
+setup_wait_dev()
+{
+	local dev=$1; shift
+	local wait_time=${1:-$WAIT_TIME}; shift
+
+	setup_wait_dev_with_timeout "$dev" $INTERFACE_TIMEOUT $wait_time
+
+	if (($?)); then
+		check_err 1
+		log_test setup_wait_dev ": Interface $dev does not come up."
+		exit 1
+	fi
+}
+
+setup_wait_dev_with_timeout()
+{
+	local dev=$1; shift
+	local max_iterations=${1:-$WAIT_TIMEOUT}; shift
+	local wait_time=${1:-$WAIT_TIME}; shift
+	local i
+
+	for ((i = 1; i <= $max_iterations; ++i)); do
+		ip link show dev $dev up \
+			| grep 'state UP' &> /dev/null
+		if [[ $? -ne 0 ]]; then
+			sleep 1
+		else
+			sleep $wait_time
+			return 0
+		fi
+	done
+
+	return 1
+}
+
+setup_wait()
+{
+	local num_netifs=${1:-$NUM_NETIFS}
+	local i
+
+	for ((i = 1; i <= num_netifs; ++i)); do
+		setup_wait_dev ${NETIFS[p$i]} 0
+	done
+
+	# Make sure links are ready.
+	sleep $WAIT_TIME
+}
+
+cmd_jq()
+{
+	local cmd=$1
+	local jq_exp=$2
+	local jq_opts=$3
+	local ret
+	local output
+
+	output="$($cmd)"
+	# it the command fails, return error right away
+	ret=$?
+	if [[ $ret -ne 0 ]]; then
+		return $ret
+	fi
+	output=$(echo $output | jq -r $jq_opts "$jq_exp")
+	ret=$?
+	if [[ $ret -ne 0 ]]; then
+		return $ret
+	fi
+	echo $output
+	# return success only in case of non-empty output
+	[ ! -z "$output" ]
+}
+
+lldpad_app_wait_set()
+{
+	local dev=$1; shift
+
+	while lldptool -t -i $dev -V APP -c app | grep -Eq "pending|unknown"; do
+		echo "$dev: waiting for lldpad to push pending APP updates"
+		sleep 5
+	done
+}
+
+lldpad_app_wait_del()
+{
+	# Give lldpad a chance to push down the changes. If the device is downed
+	# too soon, the updates will be left pending. However, they will have
+	# been struck off the lldpad's DB already, so we won't be able to tell
+	# they are pending. Then on next test iteration this would cause
+	# weirdness as newly-added APP rules conflict with the old ones,
+	# sometimes getting stuck in an "unknown" state.
+	sleep 5
+}
+
+pre_cleanup()
+{
+	if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then
+		echo "Pausing before cleanup, hit any key to continue"
+		read
+	fi
+}
+
+vrf_prepare()
+{
+	ip -4 rule add pref 32765 table local
+	ip -4 rule del pref 0
+	ip -6 rule add pref 32765 table local
+	ip -6 rule del pref 0
+}
+
+vrf_cleanup()
+{
+	ip -6 rule add pref 0 table local
+	ip -6 rule del pref 32765
+	ip -4 rule add pref 0 table local
+	ip -4 rule del pref 32765
+}
+
+__last_tb_id=0
+declare -A __TB_IDS
+
+__vrf_td_id_assign()
+{
+	local vrf_name=$1
+
+	__last_tb_id=$((__last_tb_id + 1))
+	__TB_IDS[$vrf_name]=$__last_tb_id
+	return $__last_tb_id
+}
+
+__vrf_td_id_lookup()
+{
+	local vrf_name=$1
+
+	return ${__TB_IDS[$vrf_name]}
+}
+
+vrf_create()
+{
+	local vrf_name=$1
+	local tb_id
+
+	__vrf_td_id_assign $vrf_name
+	tb_id=$?
+
+	ip link add dev $vrf_name type vrf table $tb_id
+	ip -4 route add table $tb_id unreachable default metric 4278198272
+	ip -6 route add table $tb_id unreachable default metric 4278198272
+}
+
+vrf_destroy()
+{
+	local vrf_name=$1
+	local tb_id
+
+	__vrf_td_id_lookup $vrf_name
+	tb_id=$?
+
+	ip -6 route del table $tb_id unreachable default metric 4278198272
+	ip -4 route del table $tb_id unreachable default metric 4278198272
+	ip link del dev $vrf_name
+}
+
+__addr_add_del()
+{
+	local if_name=$1
+	local add_del=$2
+	local array
+
+	shift
+	shift
+	array=("${@}")
+
+	for addrstr in "${array[@]}"; do
+		ip address $add_del $addrstr dev $if_name
+	done
+}
+
+__simple_if_init()
+{
+	local if_name=$1; shift
+	local vrf_name=$1; shift
+	local addrs=("${@}")
+
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $if_name up
+
+	__addr_add_del $if_name add "${addrs[@]}"
+}
+
+__simple_if_fini()
+{
+	local if_name=$1; shift
+	local addrs=("${@}")
+
+	__addr_add_del $if_name del "${addrs[@]}"
+
+	ip link set dev $if_name down
+	ip link set dev $if_name nomaster
+}
+
+simple_if_init()
+{
+	local if_name=$1
+	local vrf_name
+	local array
+
+	shift
+	vrf_name=v$if_name
+	array=("${@}")
+
+	vrf_create $vrf_name
+	ip link set dev $vrf_name up
+	__simple_if_init $if_name $vrf_name "${array[@]}"
+}
+
+simple_if_fini()
+{
+	local if_name=$1
+	local vrf_name
+	local array
+
+	shift
+	vrf_name=v$if_name
+	array=("${@}")
+
+	__simple_if_fini $if_name "${array[@]}"
+	vrf_destroy $vrf_name
+}
+
+tunnel_create()
+{
+	local name=$1; shift
+	local type=$1; shift
+	local local=$1; shift
+	local remote=$1; shift
+
+	ip link add name $name type $type \
+	   local $local remote $remote "$@"
+	ip link set dev $name up
+}
+
+tunnel_destroy()
+{
+	local name=$1; shift
+
+	ip link del dev $name
+}
+
+vlan_create()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf=$1; shift
+	local ips=("${@}")
+	local name=$if_name.$vid
+
+	ip link add name $name link $if_name type vlan id $vid
+	if [ "$vrf" != "" ]; then
+		ip link set dev $name master $vrf
+	fi
+	ip link set dev $name up
+	__addr_add_del $name add "${ips[@]}"
+}
+
+vlan_destroy()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local name=$if_name.$vid
+
+	ip link del dev $name
+}
+
+team_create()
+{
+	local if_name=$1; shift
+	local mode=$1; shift
+
+	require_command $TEAMD
+	$TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}'
+	for slave in "$@"; do
+		ip link set dev $slave down
+		ip link set dev $slave master $if_name
+		ip link set dev $slave up
+	done
+	ip link set dev $if_name up
+}
+
+team_destroy()
+{
+	local if_name=$1; shift
+
+	$TEAMD -t $if_name -k
+}
+
+master_name_get()
+{
+	local if_name=$1
+
+	ip -j link show dev $if_name | jq -r '.[]["master"]'
+}
+
+link_stats_get()
+{
+	local if_name=$1; shift
+	local dir=$1; shift
+	local stat=$1; shift
+
+	ip -j -s link show dev $if_name \
+		| jq '.[]["stats64"]["'$dir'"]["'$stat'"]'
+}
+
+link_stats_tx_packets_get()
+{
+	link_stats_get $1 tx packets
+}
+
+link_stats_rx_errors_get()
+{
+	link_stats_get $1 rx errors
+}
+
+tc_rule_stats_get()
+{
+	local dev=$1; shift
+	local pref=$1; shift
+	local dir=$1; shift
+	local selector=${1:-.packets}; shift
+
+	tc -j -s filter show dev $dev ${dir:-ingress} pref $pref \
+	    | jq ".[1].options.actions[].stats$selector"
+}
+
+tc_rule_handle_stats_get()
+{
+	local id=$1; shift
+	local handle=$1; shift
+	local selector=${1:-.packets}; shift
+
+	tc -j -s filter show $id \
+	    | jq ".[] | select(.options.handle == $handle) | \
+		  .options.actions[0].stats$selector"
+}
+
+ethtool_stats_get()
+{
+	local dev=$1; shift
+	local stat=$1; shift
+
+	ethtool -S $dev | grep "^ *$stat:" | head -n 1 | cut -d: -f2
+}
+
+qdisc_stats_get()
+{
+	local dev=$1; shift
+	local handle=$1; shift
+	local selector=$1; shift
+
+	tc -j -s qdisc show dev "$dev" \
+	    | jq '.[] | select(.handle == "'"$handle"'") | '"$selector"
+}
+
+qdisc_parent_stats_get()
+{
+	local dev=$1; shift
+	local parent=$1; shift
+	local selector=$1; shift
+
+	tc -j -s qdisc show dev "$dev" invisible \
+	    | jq '.[] | select(.parent == "'"$parent"'") | '"$selector"
+}
+
+ipv6_stats_get()
+{
+	local dev=$1; shift
+	local stat=$1; shift
+
+	cat /proc/net/dev_snmp6/$dev | grep "^$stat" | cut -f2
+}
+
+humanize()
+{
+	local speed=$1; shift
+
+	for unit in bps Kbps Mbps Gbps; do
+		if (($(echo "$speed < 1024" | bc))); then
+			break
+		fi
+
+		speed=$(echo "scale=1; $speed / 1024" | bc)
+	done
+
+	echo "$speed${unit}"
+}
+
+rate()
+{
+	local t0=$1; shift
+	local t1=$1; shift
+	local interval=$1; shift
+
+	echo $((8 * (t1 - t0) / interval))
+}
+
+mac_get()
+{
+	local if_name=$1
+
+	ip -j link show dev $if_name | jq -r '.[]["address"]'
+}
+
+bridge_ageing_time_get()
+{
+	local bridge=$1
+	local ageing_time
+
+	# Need to divide by 100 to convert to seconds.
+	ageing_time=$(ip -j -d link show dev $bridge \
+		      | jq '.[]["linkinfo"]["info_data"]["ageing_time"]')
+	echo $((ageing_time / 100))
+}
+
+declare -A SYSCTL_ORIG
+sysctl_set()
+{
+	local key=$1; shift
+	local value=$1; shift
+
+	SYSCTL_ORIG[$key]=$(sysctl -n $key)
+	sysctl -qw $key="$value"
+}
+
+sysctl_restore()
+{
+	local key=$1; shift
+
+	sysctl -qw $key="${SYSCTL_ORIG[$key]}"
+}
+
+forwarding_enable()
+{
+	sysctl_set net.ipv4.conf.all.forwarding 1
+	sysctl_set net.ipv6.conf.all.forwarding 1
+}
+
+forwarding_restore()
+{
+	sysctl_restore net.ipv6.conf.all.forwarding
+	sysctl_restore net.ipv4.conf.all.forwarding
+}
+
+declare -A MTU_ORIG
+mtu_set()
+{
+	local dev=$1; shift
+	local mtu=$1; shift
+
+	MTU_ORIG["$dev"]=$(ip -j link show dev $dev | jq -e '.[].mtu')
+	ip link set dev $dev mtu $mtu
+}
+
+mtu_restore()
+{
+	local dev=$1; shift
+
+	ip link set dev $dev mtu ${MTU_ORIG["$dev"]}
+}
+
+tc_offload_check()
+{
+	local num_netifs=${1:-$NUM_NETIFS}
+
+	for ((i = 1; i <= num_netifs; ++i)); do
+		ethtool -k ${NETIFS[p$i]} \
+			| grep "hw-tc-offload: on" &> /dev/null
+		if [[ $? -ne 0 ]]; then
+			return 1
+		fi
+	done
+
+	return 0
+}
+
+trap_install()
+{
+	local dev=$1; shift
+	local direction=$1; shift
+
+	# Some devices may not support or need in-hardware trapping of traffic
+	# (e.g. the veth pairs that this library creates for non-existent
+	# loopbacks). Use continue instead, so that there is a filter in there
+	# (some tests check counters), and so that other filters are still
+	# processed.
+	tc filter add dev $dev $direction pref 1 \
+		flower skip_sw action trap 2>/dev/null \
+	    || tc filter add dev $dev $direction pref 1 \
+		       flower action continue
+}
+
+trap_uninstall()
+{
+	local dev=$1; shift
+	local direction=$1; shift
+
+	tc filter del dev $dev $direction pref 1 flower
+}
+
+slow_path_trap_install()
+{
+	# For slow-path testing, we need to install a trap to get to
+	# slow path the packets that would otherwise be switched in HW.
+	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
+		trap_install "$@"
+	fi
+}
+
+slow_path_trap_uninstall()
+{
+	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
+		trap_uninstall "$@"
+	fi
+}
+
+__icmp_capture_add_del()
+{
+	local add_del=$1; shift
+	local pref=$1; shift
+	local vsuf=$1; shift
+	local tundev=$1; shift
+	local filter=$1; shift
+
+	tc filter $add_del dev "$tundev" ingress \
+	   proto ip$vsuf pref $pref \
+	   flower ip_proto icmp$vsuf $filter \
+	   action pass
+}
+
+icmp_capture_install()
+{
+	__icmp_capture_add_del add 100 "" "$@"
+}
+
+icmp_capture_uninstall()
+{
+	__icmp_capture_add_del del 100 "" "$@"
+}
+
+icmp6_capture_install()
+{
+	__icmp_capture_add_del add 100 v6 "$@"
+}
+
+icmp6_capture_uninstall()
+{
+	__icmp_capture_add_del del 100 v6 "$@"
+}
+
+__vlan_capture_add_del()
+{
+	local add_del=$1; shift
+	local pref=$1; shift
+	local dev=$1; shift
+	local filter=$1; shift
+
+	tc filter $add_del dev "$dev" ingress \
+	   proto 802.1q pref $pref \
+	   flower $filter \
+	   action pass
+}
+
+vlan_capture_install()
+{
+	__vlan_capture_add_del add 100 "$@"
+}
+
+vlan_capture_uninstall()
+{
+	__vlan_capture_add_del del 100 "$@"
+}
+
+__dscp_capture_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+	local base=$1; shift
+	local dscp;
+
+	for prio in {0..7}; do
+		dscp=$((base + prio))
+		__icmp_capture_add_del $add_del $((dscp + 100)) "" $dev \
+				       "skip_hw ip_tos $((dscp << 2))"
+	done
+}
+
+dscp_capture_install()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	__dscp_capture_add_del add $dev $base
+}
+
+dscp_capture_uninstall()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	__dscp_capture_add_del del $dev $base
+}
+
+dscp_fetch_stats()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	for prio in {0..7}; do
+		local dscp=$((base + prio))
+		local t=$(tc_rule_stats_get $dev $((dscp + 100)))
+		echo "[$dscp]=$t "
+	done
+}
+
+matchall_sink_create()
+{
+	local dev=$1; shift
+
+	tc qdisc add dev $dev clsact
+	tc filter add dev $dev ingress \
+	   pref 10000 \
+	   matchall \
+	   action drop
+}
+
+tests_run()
+{
+	local current_test
+
+	for current_test in ${TESTS:-$ALL_TESTS}; do
+		$current_test
+	done
+}
+
+multipath_eval()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local packets_rp12=$4
+	local packets_rp13=$5
+	local weights_ratio packets_ratio diff
+
+	RET=0
+
+	if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+		weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+				| bc -l)
+	else
+		weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" \
+				| bc -l)
+	fi
+
+	if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+	       check_err 1 "Packet difference is 0"
+	       log_test "Multipath"
+	       log_info "Expected ratio $weights_ratio"
+	       return
+	fi
+
+	if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+		packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+				| bc -l)
+	else
+		packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" \
+				| bc -l)
+	fi
+
+	diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+	diff=${diff#-}
+
+	test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+	check_err $? "Too large discrepancy between expected and measured ratios"
+	log_test "$desc"
+	log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+}
+
+in_ns()
+{
+	local name=$1; shift
+
+	ip netns exec $name bash <<-EOF
+		NUM_NETIFS=0
+		source lib.sh
+		$(for a in "$@"; do printf "%q${IFS:0:1}" "$a"; done)
+	EOF
+}
+
+##############################################################################
+# Tests
+
+ping_do()
+{
+	local if_name=$1
+	local dip=$2
+	local args=$3
+	local vrf_name
+
+	vrf_name=$(master_name_get $if_name)
+	ip vrf exec $vrf_name \
+		$PING $args $dip -c 10 -i 0.1 -w $PING_TIMEOUT &> /dev/null
+}
+
+ping_test()
+{
+	RET=0
+
+	ping_do $1 $2
+	check_err $?
+	log_test "ping$3"
+}
+
+ping6_do()
+{
+	local if_name=$1
+	local dip=$2
+	local args=$3
+	local vrf_name
+
+	vrf_name=$(master_name_get $if_name)
+	ip vrf exec $vrf_name \
+		$PING6 $args $dip -c 10 -i 0.1 -w $PING_TIMEOUT &> /dev/null
+}
+
+ping6_test()
+{
+	RET=0
+
+	ping6_do $1 $2
+	check_err $?
+	log_test "ping6$3"
+}
+
+learning_test()
+{
+	local bridge=$1
+	local br_port1=$2	# Connected to `host1_if`.
+	local host1_if=$3
+	local host2_if=$4
+	local mac=de:ad:be:ef:13:37
+	local ageing_time
+
+	RET=0
+
+	bridge -j fdb show br $bridge brport $br_port1 \
+		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
+	check_fail $? "Found FDB record when should not"
+
+	# Disable unknown unicast flooding on `br_port1` to make sure
+	# packets are only forwarded through the port after a matching
+	# FDB entry was installed.
+	bridge link set dev $br_port1 flood off
+
+	ip link set $host1_if promisc on
+	tc qdisc add dev $host1_if ingress
+	tc filter add dev $host1_if ingress protocol ip pref 1 handle 101 \
+		flower dst_mac $mac action drop
+
+	$MZ $host2_if -c 1 -p 64 -b $mac -t ip -q
+	sleep 1
+
+	tc -j -s filter show dev $host1_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	check_fail $? "Packet reached first host when should not"
+
+	$MZ $host1_if -c 1 -p 64 -a $mac -t ip -q
+	sleep 1
+
+	bridge -j fdb show br $bridge brport $br_port1 \
+		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
+	check_err $? "Did not find FDB record when should"
+
+	$MZ $host2_if -c 1 -p 64 -b $mac -t ip -q
+	sleep 1
+
+	tc -j -s filter show dev $host1_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	check_err $? "Packet did not reach second host when should"
+
+	# Wait for 10 seconds after the ageing time to make sure FDB
+	# record was aged-out.
+	ageing_time=$(bridge_ageing_time_get $bridge)
+	sleep $((ageing_time + 10))
+
+	bridge -j fdb show br $bridge brport $br_port1 \
+		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
+	check_fail $? "Found FDB record when should not"
+
+	bridge link set dev $br_port1 learning off
+
+	$MZ $host1_if -c 1 -p 64 -a $mac -t ip -q
+	sleep 1
+
+	bridge -j fdb show br $bridge brport $br_port1 \
+		| jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null
+	check_fail $? "Found FDB record when should not"
+
+	bridge link set dev $br_port1 learning on
+
+	tc filter del dev $host1_if ingress protocol ip pref 1 handle 101 flower
+	tc qdisc del dev $host1_if ingress
+	ip link set $host1_if promisc off
+
+	bridge link set dev $br_port1 flood on
+
+	log_test "FDB learning"
+}
+
+flood_test_do()
+{
+	local should_flood=$1
+	local mac=$2
+	local ip=$3
+	local host1_if=$4
+	local host2_if=$5
+	local err=0
+
+	# Add an ACL on `host2_if` which will tell us whether the packet
+	# was flooded to it or not.
+	ip link set $host2_if promisc on
+	tc qdisc add dev $host2_if ingress
+	tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \
+		flower dst_mac $mac action drop
+
+	$MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t ip -q
+	sleep 1
+
+	tc -j -s filter show dev $host2_if ingress \
+		| jq -e ".[] | select(.options.handle == 101) \
+		| select(.options.actions[0].stats.packets == 1)" &> /dev/null
+	if [[ $? -ne 0 && $should_flood == "true" || \
+	      $? -eq 0 && $should_flood == "false" ]]; then
+		err=1
+	fi
+
+	tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower
+	tc qdisc del dev $host2_if ingress
+	ip link set $host2_if promisc off
+
+	return $err
+}
+
+flood_unicast_test()
+{
+	local br_port=$1
+	local host1_if=$2
+	local host2_if=$3
+	local mac=de:ad:be:ef:13:37
+	local ip=192.0.2.100
+
+	RET=0
+
+	bridge link set dev $br_port flood off
+
+	flood_test_do false $mac $ip $host1_if $host2_if
+	check_err $? "Packet flooded when should not"
+
+	bridge link set dev $br_port flood on
+
+	flood_test_do true $mac $ip $host1_if $host2_if
+	check_err $? "Packet was not flooded when should"
+
+	log_test "Unknown unicast flood"
+}
+
+flood_multicast_test()
+{
+	local br_port=$1
+	local host1_if=$2
+	local host2_if=$3
+	local mac=01:00:5e:00:00:01
+	local ip=239.0.0.1
+
+	RET=0
+
+	bridge link set dev $br_port mcast_flood off
+
+	flood_test_do false $mac $ip $host1_if $host2_if
+	check_err $? "Packet flooded when should not"
+
+	bridge link set dev $br_port mcast_flood on
+
+	flood_test_do true $mac $ip $host1_if $host2_if
+	check_err $? "Packet was not flooded when should"
+
+	log_test "Unregistered multicast flood"
+}
+
+flood_test()
+{
+	# `br_port` is connected to `host2_if`
+	local br_port=$1
+	local host1_if=$2
+	local host2_if=$3
+
+	flood_unicast_test $br_port $host1_if $host2_if
+	flood_multicast_test $br_port $host1_if $host2_if
+}
+
+__start_traffic()
+{
+	local proto=$1; shift
+	local h_in=$1; shift    # Where the traffic egresses the host
+	local sip=$1; shift
+	local dip=$1; shift
+	local dmac=$1; shift
+
+	$MZ $h_in -p 8000 -A $sip -B $dip -c 0 \
+		-a own -b $dmac -t "$proto" -q "$@" &
+	sleep 1
+}
+
+start_traffic()
+{
+	__start_traffic udp "$@"
+}
+
+start_tcp_traffic()
+{
+	__start_traffic tcp "$@"
+}
+
+stop_traffic()
+{
+	# Suppress noise from killing mausezahn.
+	{ kill %% && wait %%; } 2>/dev/null
+}
+
+tcpdump_start()
+{
+	local if_name=$1; shift
+	local ns=$1; shift
+
+	capfile=$(mktemp)
+	capout=$(mktemp)
+
+	if [ -z $ns ]; then
+		ns_cmd=""
+	else
+		ns_cmd="ip netns exec ${ns}"
+	fi
+
+	if [ -z $SUDO_USER ] ; then
+		capuser=""
+	else
+		capuser="-Z $SUDO_USER"
+	fi
+
+	$ns_cmd tcpdump -e -n -Q in -i $if_name \
+		-s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 &
+	cappid=$!
+
+	sleep 1
+}
+
+tcpdump_stop()
+{
+	$ns_cmd kill $cappid
+	sleep 1
+}
+
+tcpdump_cleanup()
+{
+	rm $capfile $capout
+}
+
+tcpdump_show()
+{
+	tcpdump -e -n -r $capfile 2>&1
+}
diff --git a/tools/testing/selftests/net/forwarding/loopback.sh b/tools/testing/selftests/net/forwarding/loopback.sh
new file mode 100755
index 000000000..8f4057310
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/loopback.sh
@@ -0,0 +1,102 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+ALL_TESTS="loopback_test"
+NUM_NETIFS=2
+source tc_common.sh
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+	tc qdisc add dev $h1 clsact
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2
+}
+
+loopback_test()
+{
+	RET=0
+
+	tc filter add dev $h1 ingress protocol arp pref 1 handle 101 flower \
+		skip_hw arp_op reply arp_tip 192.0.2.1 action drop
+
+	$MZ $h1 -c 1 -t arp -q
+
+	tc_check_packets "dev $h1 ingress" 101 1
+	check_fail $? "Matched on a filter without loopback setup"
+
+	ethtool -K $h1 loopback on
+	check_err $? "Failed to enable loopback"
+
+	setup_wait_dev $h1
+
+	$MZ $h1 -c 1 -t arp -q
+
+	tc_check_packets "dev $h1 ingress" 101 1
+	check_err $? "Did not match on filter with loopback"
+
+	ethtool -K $h1 loopback off
+	check_err $? "Failed to disable loopback"
+
+	$MZ $h1 -c 1 -t arp -q
+
+	tc_check_packets "dev $h1 ingress" 101 2
+	check_fail $? "Matched on a filter after loopback was removed"
+
+	tc filter del dev $h1 ingress protocol arp pref 1 handle 101 flower
+
+	log_test "loopback"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	if ethtool -k $h1 | grep loopback | grep -q fixed; then
+		log_test "SKIP: dev $h1 does not support loopback feature"
+		exit $ksft_skip
+	fi
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre.sh b/tools/testing/selftests/net/forwarding/mirror_gre.sh
new file mode 100755
index 000000000..026644360
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre.sh
@@ -0,0 +1,160 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for "tc action mirred egress mirror" when the device to mirror to is a
+# gretap or ip6gretap netdevice. Expect that the packets come out encapsulated,
+# and another gretap / ip6gretap netdevice is then capable of decapsulating the
+# traffic. Test that the payload is what is expected (ICMP ping request or
+# reply, depending on test).
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+	test_gretap_mac
+	test_ip6gretap_mac
+	test_two_spans
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_mac()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local what=$1; shift
+
+	case "$direction" in
+	ingress) local src_mac=$(mac_get $h1); local dst_mac=$(mac_get $h2)
+		;;
+	egress) local src_mac=$(mac_get $h2); local dst_mac=$(mac_get $h1)
+		;;
+	esac
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	icmp_capture_install h3-${tundev} "src_mac $src_mac dst_mac $dst_mac"
+
+	mirror_test v$h1 192.0.2.1 192.0.2.2 h3-${tundev} 100 10
+
+	icmp_capture_uninstall h3-${tundev}
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what: envelope MAC ($tcflags)"
+}
+
+test_two_spans()
+{
+	RET=0
+
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+	mirror_install $swp1 egress gt6 "matchall $tcflags"
+	quick_test_span_gre_dir gt4 ingress
+	quick_test_span_gre_dir gt6 egress
+
+	mirror_uninstall $swp1 ingress
+	fail_test_span_gre_dir gt4 ingress
+	quick_test_span_gre_dir gt6 egress
+
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+	mirror_uninstall $swp1 egress
+	quick_test_span_gre_dir gt4 ingress
+	fail_test_span_gre_dir gt6 egress
+
+	mirror_uninstall $swp1 ingress
+	log_test "two simultaneously configured mirrors ($tcflags)"
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+}
+
+test_gretap_mac()
+{
+	test_span_gre_mac gt4 ingress "mirror to gretap"
+	test_span_gre_mac gt4 egress "mirror to gretap"
+}
+
+test_ip6gretap_mac()
+{
+	test_span_gre_mac gt6 ingress "mirror to ip6gretap"
+	test_span_gre_mac gt6 egress "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bound.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bound.sh
new file mode 100755
index 000000000..360ca133b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bound.sh
@@ -0,0 +1,226 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirror                                                   |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   | +---------------------------------------------------------------------+ |
+#   | | OL                      + gt6 (ip6gretap)      + gt4 (gretap)       | |
+#   | |                         : loc=2001:db8:2::1    : loc=192.0.2.129    | |
+#   | |                         : rem=2001:db8:2::2    : rem=192.0.2.130    | |
+#   | |                         : ttl=100              : ttl=100            | |
+#   | |                         : tos=inherit          : tos=inherit        | |
+#   | +-------------------------:--|-------------------:--|-----------------+ |
+#   |                           :  |                   :  |                   |
+#   | +-------------------------:--|-------------------:--|-----------------+ |
+#   | | UL                      :  |,---------------------'                 | |
+#   | |   + $swp3               :  ||                  :                    | |
+#   | |   | 192.0.2.129/28      :  vv                  :                    | |
+#   | |   | 2001:db8:2::1/64    :  + ul (dummy)        :                    | |
+#   | +---|---------------------:----------------------:--------------------+ |
+#   +-----|---------------------:----------------------:----------------------+
+#         |                     :                      :
+#   +-----|---------------------:----------------------:----------------------+
+#   | H3  + $h3                 + h3-gt6 (ip6gretap)   + h3-gt4 (gretap)      |
+#   |       192.0.2.130/28        loc=2001:db8:2::2      loc=192.0.2.130      |
+#   |       2001:db8:2::2/64      rem=2001:db8:2::1      rem=192.0.2.129      |
+#   |                             ttl=100                ttl=100              |
+#   |                             tos=inherit            tos=inherit          |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+#
+# This tests mirroring to gretap and ip6gretap configured in an overlay /
+# underlay manner, i.e. with a bound dummy device that marks underlay VRF where
+# the encapsulated packed should be routed.
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.130/28 2001:db8:2::2/64
+
+	tunnel_create h3-gt4 gretap 192.0.2.130 192.0.2.129
+	ip link set h3-gt4 vrf v$h3
+	matchall_sink_create h3-gt4
+
+	tunnel_create h3-gt6 ip6gretap 2001:db8:2::2 2001:db8:2::1
+	ip link set h3-gt6 vrf v$h3
+	matchall_sink_create h3-gt6
+}
+
+h3_destroy()
+{
+	tunnel_destroy h3-gt6
+	tunnel_destroy h3-gt4
+
+	simple_if_fini $h3 192.0.2.130/28 2001:db8:2::2/64
+}
+
+switch_create()
+{
+	# Bridge between H1 and H2.
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+
+	# Underlay.
+
+	simple_if_init $swp3 192.0.2.129/28 2001:db8:2::1/64
+
+	ip link add name ul type dummy
+	ip link set dev ul master v$swp3
+	ip link set dev ul up
+
+	# Overlay.
+
+	vrf_create vrf-ol
+	ip link set dev vrf-ol up
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit dev ul
+	ip link set dev gt4 master vrf-ol
+	ip link set dev gt4 up
+
+	tunnel_create gt6 ip6gretap 2001:db8:2::1 2001:db8:2::2 \
+		      ttl 100 tos inherit dev ul allow-localremote
+	ip link set dev gt6 master vrf-ol
+	ip link set dev gt6 up
+}
+
+switch_destroy()
+{
+	vrf_destroy vrf-ol
+
+	tunnel_destroy gt6
+	tunnel_destroy gt4
+
+	simple_if_fini $swp3 192.0.2.129/28 2001:db8:2::1/64
+
+	ip link del dev ul
+
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap w/ UL"
+	full_test_span_gre_dir gt4 egress  0 8 "mirror to gretap w/ UL"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap w/ UL"
+	full_test_span_gre_dir gt6 egress  0 8 "mirror to ip6gretap w/ UL"
+}
+
+test_all()
+{
+	RET=0
+
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh
new file mode 100755
index 000000000..c5095da7f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device without vlan filtering (802.1d).
+#
+# This test uses standard topology for testing mirror-to-gretap. See
+# mirror_gre_topo_lib.sh for more details. The full topology is as follows:
+#
+#  +---------------------+                             +---------------------+
+#  | H1                  |                             |                  H2 |
+#  |     + $h1           |                             |           $h2 +     |
+#  |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#  +-----|---------------+                             +---------------|-----+
+#        |                                                             |
+#  +-----|-------------------------------------------------------------|-----+
+#  | SW  o---> mirror                                                  |     |
+#  | +---|-------------------------------------------------------------|---+ |
+#  | |   + $swp1            + br1 (802.1q bridge)                $swp2 +   | |
+#  | +---------------------------------------------------------------------+ |
+#  |                                                                         |
+#  | +---------------------------------------------------------------------+ |
+#  | |                      + br2 (802.1d bridge)                          | |
+#  | |                        192.0.2.129/28                               | |
+#  | |   + $swp3              2001:db8:2::1/64                             | |
+#  | +---|-----------------------------------------------------------------+ |
+#  |     |                                          ^                    ^   |
+#  |     |                     + gt6 (ip6gretap)    | + gt4 (gretap)     |   |
+#  |     |                     : loc=2001:db8:2::1  | : loc=192.0.2.129  |   |
+#  |     |                     : rem=2001:db8:2::2 -+ : rem=192.0.2.130 -+   |
+#  |     |                     : ttl=100              : ttl=100              |
+#  |     |                     : tos=inherit          : tos=inherit          |
+#  +-----|---------------------:----------------------:----------------------+
+#        |                     :                      :
+#  +-----|---------------------:----------------------:----------------------+
+#  | H3  + $h3                 + h3-gt6(ip6gretap)    + h3-gt4 (gretap)      |
+#  |       192.0.2.130/28        loc=2001:db8:2::2      loc=192.0.2.130      |
+#  |       2001:db8:2::2/64      rem=2001:db8:2::1      rem=192.0.2.129      |
+#  |                             ttl=100                ttl=100              |
+#  |                             tos=inherit            tos=inherit          |
+#  +-------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip link add name br2 type bridge vlan_filtering 0
+	ip link set dev br2 up
+
+	ip link set dev $swp3 master br2
+	ip route add 192.0.2.130/32 dev br2
+	ip -6 route add 2001:db8:2::2/128 dev br2
+
+	ip address add dev br2 192.0.2.129/28
+	ip address add dev br2 2001:db8:2::1/64
+
+	ip address add dev $h3 192.0.2.130/28
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $h3 192.0.2.130/28
+	ip link del dev br2
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
new file mode 100755
index 000000000..f8cda822c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device without vlan filtering (802.1d). The device attached to that
+# bridge is a VLAN.
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+	test_gretap_stp
+	test_ip6gretap_stp
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip link add name br2 type bridge vlan_filtering 0
+	ip link set dev br2 up
+
+	vlan_create $swp3 555
+
+	ip link set dev $swp3.555 master br2
+	ip route add 192.0.2.130/32 dev br2
+	ip -6 route add 2001:db8:2::2/128 dev br2
+
+	ip address add dev br2 192.0.2.129/32
+	ip address add dev br2 2001:db8:2::1/128
+
+	vlan_create $h3 555 v$h3 192.0.2.130/28 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	vlan_destroy $h3 555
+	ip link del dev br2
+	vlan_destroy $swp3 555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_vlan_match()
+{
+	local tundev=$1; shift
+	local vlan_match=$1; shift
+	local what=$1; shift
+
+	full_test_span_gre_dir_vlan $tundev ingress "$vlan_match" 8 0 "$what"
+	full_test_span_gre_dir_vlan $tundev egress "$vlan_match" 0 8 "$what"
+}
+
+test_gretap()
+{
+	test_vlan_match gt4 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to ip6gretap"
+}
+
+test_gretap_stp()
+{
+	# Sometimes after mirror installation, the neighbor's state is not valid.
+	# The reason is that there is no SW datapath activity related to the
+	# neighbor for the remote GRE address. Therefore whether the corresponding
+	# neighbor will be valid is a matter of luck, and the test is thus racy.
+	# Set the neighbor's state to permanent, so it would be always valid.
+	ip neigh replace 192.0.2.130 lladdr $(mac_get $h3) \
+		nud permanent dev br2
+	full_test_span_gre_stp gt4 $swp3.555 "mirror to gretap"
+}
+
+test_ip6gretap_stp()
+{
+	ip neigh replace 2001:db8:2::2 lladdr $(mac_get $h3) \
+		nud permanent dev br2
+	full_test_span_gre_stp gt6 $swp3.555 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
new file mode 100755
index 000000000..9ff22f280
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
@@ -0,0 +1,129 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q).
+#
+# This test uses standard topology for testing mirror-to-gretap. See
+# mirror_gre_topo_lib.sh for more details. The full topology is as follows:
+#
+#  +---------------------+                               +---------------------+
+#  | H1                  |                               |                  H2 |
+#  |     + $h1           |                               |           $h2 +     |
+#  |     | 192.0.2.1/28  |                               |  192.0.2.2/28 |     |
+#  +-----|---------------+                               +---------------|-----+
+#        |                                                               |
+#  +-----|---------------------------------------------------------------|-----+
+#  | SW  o---> mirror                                                    |     |
+#  | +---|---------------------------------------------------------------|---+ |
+#  | |   + $swp1                  + br1 (802.1q bridge)            $swp2 +   | |
+#  | |                              192.0.2.129/28                           | |
+#  | |   + $swp3                    2001:db8:2::1/64                         | |
+#  | |   | vid555                   vid555[pvid,untagged]                    | |
+#  | +---|-------------------------------------------------------------------+ |
+#  |     |                                          ^                      ^   |
+#  |     |                     + gt6 (ip6gretap)    |   + gt4 (gretap)     |   |
+#  |     |                     : loc=2001:db8:2::1  |   : loc=192.0.2.129  |   |
+#  |     |                     : rem=2001:db8:2::2 -+   : rem=192.0.2.130 -+   |
+#  |     |                     : ttl=100                : ttl=100              |
+#  |     |                     : tos=inherit            : tos=inherit          |
+#  +-----|---------------------:------------------------:----------------------+
+#        |                     :                        :
+#  +-----|---------------------:------------------------:----------------------+
+#  | H3  + $h3                 + h3-gt6(ip6gretap)      + h3-gt4 (gretap)      |
+#  |     |                       loc=2001:db8:2::2        loc=192.0.2.130      |
+#  |     + $h3.555               rem=2001:db8:2::1        rem=192.0.2.129      |
+#  |       192.0.2.130/28        ttl=100                  ttl=100              |
+#  |       2001:db8:2::2/64      tos=inherit              tos=inherit          |
+#  +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+	# Avoid changing br1's PVID while it is operational as a L3 interface.
+	ip link set dev br1 down
+
+	ip link set dev $swp3 master br1
+	bridge vlan add dev br1 vid 555 pvid untagged self
+	ip link set dev br1 up
+	ip address add dev br1 192.0.2.129/28
+	ip address add dev br1 2001:db8:2::1/64
+
+	ip -4 route add 192.0.2.130/32 dev br1
+	ip -6 route add 2001:db8:2::2/128 dev br1
+
+	vlan_create $h3 555 v$h3 192.0.2.130/28 2001:db8:2::2/64
+	bridge vlan add dev $swp3 vid 555
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link set dev $swp3 nomaster
+	vlan_destroy $h3 555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+}
+
+tests()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+tests
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
new file mode 100755
index 000000000..28d568c48
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
@@ -0,0 +1,292 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q), and the egress device is a team
+# device.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |     + $h1.333        |                             |        $h1.555 +     |
+# |     | 192.0.2.1/28   |                             |  192.0.2.18/28 |     |
+# +-----|----------------+                             +----------------|-----+
+#       |                               $h1                             |
+#       +--------------------------------+------------------------------+
+#                                        |
+# +--------------------------------------|------------------------------------+
+# | SW                                   o---> mirror                         |
+# |                                      |                                    |
+# |     +--------------------------------+------------------------------+     |
+# |     |                              $swp1                            |     |
+# |     + $swp1.333                                           $swp1.555 +     |
+# |       192.0.2.2/28                                    192.0.2.17/28       |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                        BR1 (802.1q)                                   | |
+# | |     + lag (team)       192.0.2.129/28                                 | |
+# | |    / \                 2001:db8:2::1/64                               | |
+# | +---/---\---------------------------------------------------------------+ |
+# |    /     \                                                            ^   |
+# |   |       \                                        + gt4 (gretap)     |   |
+# |   |        \                                         loc=192.0.2.129  |   |
+# |   |         \                                        rem=192.0.2.130 -+   |
+# |   |          \                                       ttl=100              |
+# |   |           \                                      tos=inherit          |
+# |   |            \                                                          |
+# |   |             \_________________________________                        |
+# |   |                                               \                       |
+# |   + $swp3                                          + $swp4                |
+# +---|------------------------------------------------|----------------------+
+#     |                                                |
+# +---|----------------------+                     +---|----------------------+
+# |   + $h3               H3 |                     |   + $h4               H4 |
+# |     192.0.2.130/28       |                     |     192.0.2.130/28       |
+# |     2001:db8:2::2/64     |                     |     2001:db8:2::2/64     |
+# +--------------------------+                     +--------------------------+
+
+ALL_TESTS="
+	test_mirror_gretap_first
+	test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+	local ips=("${@}")
+
+	vrf_create $vrf_name
+	ip link set dev $vrf_name up
+	vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+
+	vlan_destroy $if_name $vid
+	ip link set dev $vrf_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+	ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del 192.0.2.16/28 vrf vrf-h1
+	vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+	vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+	ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip -4 route del 192.0.2.0/28 vrf vrf-h2
+	vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.130/28
+	tc qdisc add dev $h3 clsact
+}
+
+h3_destroy()
+{
+	tc qdisc del dev $h3 clsact
+	simple_if_fini $h3 192.0.2.130/28
+}
+
+h4_create()
+{
+	simple_if_init $h4 192.0.2.130/28
+	tc qdisc add dev $h4 clsact
+}
+
+h4_destroy()
+{
+	tc qdisc del dev $h4 clsact
+	simple_if_fini $h4 192.0.2.130/28
+}
+
+switch_create()
+{
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+	vlan_create $swp1 333 "" 192.0.2.2/28
+	vlan_create $swp1 555 "" 192.0.2.17/28
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	ip link set dev $swp3 up
+	ip link set dev $swp4 up
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+	__addr_add_del br1 add 192.0.2.129/32
+	ip -4 route add 192.0.2.130/32 dev br1
+
+	team_create lag loadbalance $swp3 $swp4
+	ip link set dev lag master br1
+}
+
+switch_destroy()
+{
+	ip link set dev lag nomaster
+	team_destroy lag
+
+	ip -4 route del 192.0.2.130/32 dev br1
+	__addr_add_del br1 del 192.0.2.129/32
+	ip link set dev br1 down
+	ip link del dev br1
+
+	ip link set dev $swp4 down
+	ip link set dev $swp3 down
+
+	tunnel_destroy gt4
+
+	vlan_destroy $swp1 555
+	vlan_destroy $swp1 333
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp3=${NETIFS[p3]}
+	h3=${NETIFS[p4]}
+
+	swp4=${NETIFS[p5]}
+	h4=${NETIFS[p6]}
+
+	vrf_prepare
+
+	ip link set dev $h1 up
+	h1_create
+	h2_create
+	h3_create
+	h4_create
+	switch_create
+
+	forwarding_enable
+
+	trap_install $h3 ingress
+	trap_install $h4 ingress
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	trap_uninstall $h4 ingress
+	trap_uninstall $h3 ingress
+
+	forwarding_restore
+
+	switch_destroy
+	h4_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+	ip link set dev $h1 down
+
+	vrf_cleanup
+}
+
+test_lag_slave()
+{
+	local host_dev=$1; shift
+	local up_dev=$1; shift
+	local down_dev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	tc filter add dev $swp1 ingress pref 999 \
+		proto 802.1q flower vlan_ethtype arp $tcflags \
+		action pass
+	mirror_install $swp1 ingress gt4 \
+		"proto 802.1q flower vlan_id 333 $tcflags"
+
+	# Test connectivity through $up_dev when $down_dev is set down.
+	ip link set dev $down_dev down
+	ip neigh flush dev br1
+	setup_wait_dev $up_dev
+	setup_wait_dev $host_dev
+	$ARPING -I br1 192.0.2.130 -qfc 1
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $host_dev 1 10
+
+	# Test lack of connectivity when both slaves are down.
+	ip link set dev $up_dev down
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+
+	ip link set dev $up_dev up
+	ip link set dev $down_dev up
+	mirror_uninstall $swp1 ingress
+	tc filter del dev $swp1 ingress pref 999
+
+	log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+	test_lag_slave $h3 $swp3 $swp4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+	test_lag_slave $h4 $swp4 $swp3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh b/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
new file mode 100755
index 000000000..b501b3663
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
@@ -0,0 +1,273 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test how mirrors to gretap and ip6gretap react to changes to relevant
+# configuration.
+
+ALL_TESTS="
+	test_ttl
+	test_tun_up
+	test_egress_up
+	test_remote_ip
+	test_tun_del
+	test_route_del
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	# This test downs $swp3, which deletes the configured IPv6 address
+	# unless this sysctl is set.
+	sysctl_set net.ipv6.conf.$swp3.keep_addr_on_down 1
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	sysctl_restore net.ipv6.conf.$swp3.keep_addr_on_down
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_ttl()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local prot=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev \
+		"prot ip flower $tcflags ip_prot icmp"
+	tc filter add dev $h3 ingress pref 77 prot $prot \
+		flower ip_ttl 50 action pass
+
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 0
+
+	ip link set dev $tundev type $type ttl 50
+	sleep 2
+	mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 10
+
+	ip link set dev $tundev type $type ttl 100
+	tc filter del dev $h3 ingress pref 77
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: TTL change ($tcflags)"
+}
+
+test_span_gre_tun_up()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev down
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev up
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: tunnel down/up ($tcflags)"
+}
+
+test_span_gre_egress_up()
+{
+	local tundev=$1; shift
+	local remote_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $swp3 down
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	# After setting the device up, wait for neighbor to get resolved so that
+	# we can expect mirroring to work.
+	ip link set dev $swp3 up
+	setup_wait_dev $swp3
+	ping -c 1 -I $swp3 $remote_ip &>/dev/null
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: egress down/up ($tcflags)"
+}
+
+test_span_gre_remote_ip()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local correct_ip=$1; shift
+	local wrong_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev type $type remote $wrong_ip
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev type $type remote $correct_ip
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: remote address change ($tcflags)"
+}
+
+test_span_gre_tun_del()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local flags=$1; shift
+	local local_ip=$1; shift
+	local remote_ip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+	ip link del dev $tundev
+	fail_test_span_gre_dir $tundev ingress
+
+	tunnel_create $tundev $type $local_ip $remote_ip \
+		      ttl 100 tos inherit $flags
+
+	# Recreating the tunnel doesn't reestablish mirroring, so reinstall it
+	# and verify it works for the follow-up tests.
+	mirror_uninstall $swp1 ingress
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: tunnel deleted ($tcflags)"
+}
+
+test_span_gre_route_del()
+{
+	local tundev=$1; shift
+	local edev=$1; shift
+	local route=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+
+	ip route del $route dev $edev
+	fail_test_span_gre_dir $tundev ingress
+
+	ip route add $route dev $edev
+	quick_test_span_gre_dir $tundev ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: underlay route removal ($tcflags)"
+}
+
+test_ttl()
+{
+	test_span_gre_ttl gt4 gretap ip "mirror to gretap"
+	test_span_gre_ttl gt6 ip6gretap ipv6 "mirror to ip6gretap"
+}
+
+test_tun_up()
+{
+	test_span_gre_tun_up gt4 "mirror to gretap"
+	test_span_gre_tun_up gt6 "mirror to ip6gretap"
+}
+
+test_egress_up()
+{
+	test_span_gre_egress_up gt4 192.0.2.130 "mirror to gretap"
+	test_span_gre_egress_up gt6 2001:db8:2::2 "mirror to ip6gretap"
+}
+
+test_remote_ip()
+{
+	test_span_gre_remote_ip gt4 gretap 192.0.2.130 192.0.2.132 "mirror to gretap"
+	test_span_gre_remote_ip gt6 ip6gretap 2001:db8:2::2 2001:db8:2::4 "mirror to ip6gretap"
+}
+
+test_tun_del()
+{
+	test_span_gre_tun_del gt4 gretap "" \
+			      192.0.2.129 192.0.2.130 "mirror to gretap"
+	test_span_gre_tun_del gt6 ip6gretap allow-localremote \
+			      2001:db8:2::1 2001:db8:2::2 "mirror to ip6gretap"
+}
+
+test_route_del()
+{
+	test_span_gre_route_del gt4 $swp3 192.0.2.128/28 "mirror to gretap"
+	test_span_gre_route_del gt6 $swp3 2001:db8:2::/64 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_flower.sh b/tools/testing/selftests/net/forwarding/mirror_gre_flower.sh
new file mode 100755
index 000000000..09389f3b9
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_flower.sh
@@ -0,0 +1,137 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# This tests flower-triggered mirroring to gretap and ip6gretap netdevices. The
+# interfaces on H1 and H2 have two addresses each. Flower match on one of the
+# addresses is configured with mirror action. It is expected that when pinging
+# this address, mirroring takes place, whereas when pinging the other one,
+# there's no mirroring.
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+
+	ip address add dev $h1 192.0.2.3/28
+	ip address add dev $h2 192.0.2.4/28
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h2 192.0.2.4/28
+	ip address del dev $h1 192.0.2.3/28
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_dir_acl()
+{
+	test_span_gre_dir_ips "$@" 192.0.2.3 192.0.2.4
+}
+
+fail_test_span_gre_dir_acl()
+{
+	fail_test_span_gre_dir_ips "$@" 192.0.2.3 192.0.2.4
+}
+
+full_test_span_gre_dir_acl()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local match_dip=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev \
+		       "protocol ip flower $tcflags dst_ip $match_dip"
+	fail_test_span_gre_dir $tundev $direction
+	test_span_gre_dir_acl "$tundev" "$direction" \
+			  "$forward_type" "$backward_type"
+	mirror_uninstall $swp1 $direction
+
+	# Test lack of mirroring after ACL mirror is uninstalled.
+	fail_test_span_gre_dir_acl "$tundev" "$direction"
+
+	log_test "$direction $what ($tcflags)"
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir_acl gt4 ingress 8 0 192.0.2.4 "ACL mirror to gretap"
+	full_test_span_gre_dir_acl gt4 egress 0 8 192.0.2.3 "ACL mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir_acl gt6 ingress 8 0 192.0.2.4 "ACL mirror to ip6gretap"
+	full_test_span_gre_dir_acl gt6 egress 0 8 192.0.2.3 "ACL mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
new file mode 100755
index 000000000..9edf4cb10
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
@@ -0,0 +1,285 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# team device.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1.333         |                             |        $h1.555 +     |
+# |    | 192.0.2.1/28    |                             |  192.0.2.18/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                $h1                             |
+#      +---------------------------------+------------------------------+
+#                                        |
+# +--------------------------------------|------------------------------------+
+# | SW                                   o---> mirror                         |
+# |                                      |                                    |
+# |   +----------------------------------+------------------------------+     |
+# |   |                                $swp1                            |     |
+# |   + $swp1.333                                             $swp1.555 +     |
+# |     192.0.2.2/28                                      192.0.2.17/28       |
+# |                                                                           |
+# |                                                                           |
+# |   + gt4 (gretap)      ,-> + lag1 (team)                                   |
+# |     loc=192.0.2.129   |   | 192.0.2.129/28                                |
+# |     rem=192.0.2.130 --'   |                                               |
+# |     ttl=100               |                                               |
+# |     tos=inherit           |                                               |
+# |      _____________________|______________________                         |
+# |     /                                            \                        |
+# |    /                                              \                       |
+# |   + $swp3                                          + $swp4                |
+# +---|------------------------------------------------|----------------------+
+#     |                                                |
+# +---|------------------------------------------------|----------------------+
+# |   + $h3                                            + $h4               H3 |
+# |    \                                              /                       |
+# |     \____________________________________________/                        |
+# |                           |                                               |
+# |                           + lag2 (team)                                   |
+# |                             192.0.2.130/28                                |
+# |                                                                           |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_mirror_gretap_first
+	test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+	local ips=("${@}")
+
+	vrf_create $vrf_name
+	ip link set dev $vrf_name up
+	vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+
+	vlan_destroy $if_name $vid
+	ip link set dev $vrf_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+	ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del 192.0.2.16/28 vrf vrf-h1
+	vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+	vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+	ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip -4 route del 192.0.2.0/28 vrf vrf-h2
+	vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create_team()
+{
+	team_create lag2 lacp $h3 $h4
+	__simple_if_init lag2 vrf-h3 192.0.2.130/32
+	ip -4 route add vrf vrf-h3 192.0.2.129/32 dev lag2
+}
+
+h3_destroy_team()
+{
+	ip -4 route del vrf vrf-h3 192.0.2.129/32 dev lag2
+	__simple_if_fini lag2 192.0.2.130/32
+	team_destroy lag2
+
+	ip link set dev $h3 down
+	ip link set dev $h4 down
+}
+
+h3_create()
+{
+	vrf_create vrf-h3
+	ip link set dev vrf-h3 up
+	tc qdisc add dev $h3 clsact
+	tc qdisc add dev $h4 clsact
+	h3_create_team
+}
+
+h3_destroy()
+{
+	h3_destroy_team
+	tc qdisc del dev $h4 clsact
+	tc qdisc del dev $h3 clsact
+	ip link set dev vrf-h3 down
+	vrf_destroy vrf-h3
+}
+
+switch_create()
+{
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+	vlan_create $swp1 333 "" 192.0.2.2/28
+	vlan_create $swp1 555 "" 192.0.2.17/28
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	ip link set dev $swp3 up
+	ip link set dev $swp4 up
+	team_create lag1 lacp $swp3 $swp4
+	__addr_add_del lag1 add 192.0.2.129/32
+	ip -4 route add 192.0.2.130/32 dev lag1
+}
+
+switch_destroy()
+{
+	ip -4 route del 192.0.2.130/32 dev lag1
+	__addr_add_del lag1 del 192.0.2.129/32
+	team_destroy lag1
+
+	ip link set dev $swp4 down
+	ip link set dev $swp3 down
+
+	tunnel_destroy gt4
+
+	vlan_destroy $swp1 555
+	vlan_destroy $swp1 333
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp3=${NETIFS[p3]}
+	h3=${NETIFS[p4]}
+
+	swp4=${NETIFS[p5]}
+	h4=${NETIFS[p6]}
+
+	vrf_prepare
+
+	ip link set dev $h1 up
+	h1_create
+	h2_create
+	h3_create
+	switch_create
+
+	trap_install $h3 ingress
+	trap_install $h4 ingress
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	trap_uninstall $h4 ingress
+	trap_uninstall $h3 ingress
+
+	switch_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+	ip link set dev $h1 down
+
+	vrf_cleanup
+}
+
+test_lag_slave()
+{
+	local up_dev=$1; shift
+	local down_dev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress gt4 \
+		       "proto 802.1q flower vlan_id 333 $tcflags"
+
+	# Move $down_dev away from the team. That will prompt change in
+	# txability of the connected device, without changing its upness. The
+	# driver should notice the txability change and move the traffic to the
+	# other slave.
+	ip link set dev $down_dev nomaster
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10
+
+	# Test lack of connectivity when neither slave is txable.
+	ip link set dev $up_dev nomaster
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+	mirror_uninstall $swp1 ingress
+
+	# Recreate H3's team device, because mlxsw, which this test is
+	# predominantly mean to test, requires a bottom-up construction and
+	# doesn't allow enslavement to a device that already has an upper.
+	h3_destroy_team
+	h3_create_team
+	# Wait for ${h,swp}{3,4}.
+	setup_wait
+
+	log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+	test_lag_slave $h3 $h4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+	test_lag_slave $h4 $h3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh
new file mode 100644
index 000000000..fac486178
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0
+
+source "$relative_path/mirror_lib.sh"
+
+quick_test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+
+	do_test_span_dir_ips 10 h3-$tundev "$@"
+}
+
+fail_test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+
+	do_test_span_dir_ips 0 h3-$tundev "$@"
+}
+
+test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+
+	test_span_dir_ips h3-$tundev "$@"
+}
+
+full_test_span_gre_dir_ips()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local what=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	test_span_dir_ips "h3-$tundev" "$direction" "$forward_type" \
+			  "$backward_type" "$ip1" "$ip2"
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what ($tcflags)"
+}
+
+full_test_span_gre_dir_vlan_ips()
+{
+	local tundev=$1; shift
+	local direction=$1; shift
+	local vlan_match=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local what=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+
+	test_span_dir_ips "h3-$tundev" "$direction" "$forward_type" \
+			  "$backward_type" "$ip1" "$ip2"
+
+	tc filter add dev $h3 ingress pref 77 prot 802.1q \
+		flower $vlan_match \
+		action pass
+	mirror_test v$h1 $ip1 $ip2 $h3 77 10
+	tc filter del dev $h3 ingress pref 77
+
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what ($tcflags)"
+}
+
+quick_test_span_gre_dir()
+{
+	quick_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+fail_test_span_gre_dir()
+{
+	fail_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+test_span_gre_dir()
+{
+	test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+full_test_span_gre_dir()
+{
+	full_test_span_gre_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+full_test_span_gre_dir_vlan()
+{
+	full_test_span_gre_dir_vlan_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+full_test_span_gre_stp_ips()
+{
+	local tundev=$1; shift
+	local nbpdev=$1; shift
+	local what=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local h3mac=$(mac_get $h3)
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir_ips $tundev ingress $ip1 $ip2
+
+	bridge link set dev $nbpdev state disabled
+	sleep 1
+	fail_test_span_gre_dir_ips $tundev ingress $ip1 $ip2
+
+	bridge link set dev $nbpdev state forwarding
+	sleep 1
+	quick_test_span_gre_dir_ips $tundev ingress $ip1 $ip2
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: STP state ($tcflags)"
+}
+
+full_test_span_gre_stp()
+{
+	full_test_span_gre_stp_ips "$@" 192.0.2.1 192.0.2.2
+}
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_neigh.sh b/tools/testing/selftests/net/forwarding/mirror_gre_neigh.sh
new file mode 100755
index 000000000..fc0508e40
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_neigh.sh
@@ -0,0 +1,115 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for mirroring to gretap and ip6gretap, such that the neighbor entry for
+# the tunnel remote address has invalid address at the time that the mirroring
+# is set up. Later on, the neighbor is deleted and it is expected to be
+# reinitialized using the usual ARP process, and the mirroring offload updated.
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_neigh()
+{
+	local addr=$1; shift
+	local tundev=$1; shift
+	local direction=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip neigh replace dev $swp3 $addr lladdr 00:11:22:33:44:55
+	mirror_install $swp1 $direction $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+	ip neigh del dev $swp3 $addr
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction $what: neighbor change ($tcflags)"
+}
+
+test_gretap()
+{
+	test_span_gre_neigh 192.0.2.130 gt4 ingress "mirror to gretap"
+	test_span_gre_neigh 192.0.2.130 gt4 egress "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	test_span_gre_neigh 2001:db8:2::2 gt6 ingress "mirror to ip6gretap"
+	test_span_gre_neigh 2001:db8:2::2 gt6 egress "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh b/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh
new file mode 100755
index 000000000..6f9ef1820
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh
@@ -0,0 +1,131 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test that gretap and ip6gretap mirroring works when the other tunnel endpoint
+# is reachable through a next-hop route (as opposed to directly-attached route).
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$h3.rp_filter 0
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	sysctl_set net.ipv4.conf.v$h3.rp_filter 0
+
+	ip address add dev $swp3 192.0.2.161/28
+	ip address add dev $h3 192.0.2.162/28
+	ip address add dev gt4 192.0.2.129/32
+	ip address add dev h3-gt4 192.0.2.130/32
+
+	# IPv6 route can't be added after address. Such routes are rejected due
+	# to the gateway address having been configured on the local system. It
+	# works the other way around though.
+	ip address add dev $swp3 2001:db8:4::1/64
+	ip -6 route add 2001:db8:2::2/128 via 2001:db8:4::2
+	ip address add dev $h3 2001:db8:4::2/64
+	ip address add dev gt6 2001:db8:2::1
+	ip address add dev h3-gt6 2001:db8:2::2
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip -6 route del 2001:db8:2::2/128 via 2001:db8:4::2
+	ip address del dev $h3 2001:db8:4::2/64
+	ip address del dev $swp3 2001:db8:4::1/64
+
+	ip address del dev $h3 192.0.2.162/28
+	ip address del dev $swp3 192.0.2.161/28
+
+	sysctl_restore net.ipv4.conf.v$h3.rp_filter 0
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+
+	sysctl_restore net.ipv4.conf.$h3.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
+}
+
+test_gretap()
+{
+	RET=0
+	mirror_install $swp1 ingress gt4 "matchall $tcflags"
+
+	# For IPv4, test that there's no mirroring without the route directing
+	# the traffic to tunnel remote address. Then add it and test that
+	# mirroring starts. For IPv6 we can't test this due to the limitation
+	# that routes for locally-specified IPv6 addresses can't be added.
+	fail_test_span_gre_dir gt4 ingress
+
+	ip route add 192.0.2.130/32 via 192.0.2.162
+	quick_test_span_gre_dir gt4 ingress
+	ip route del 192.0.2.130/32 via 192.0.2.162
+
+	mirror_uninstall $swp1 ingress
+	log_test "mirror to gre with next-hop remote ($tcflags)"
+}
+
+test_ip6gretap()
+{
+	RET=0
+
+	mirror_install $swp1 ingress gt6 "matchall $tcflags"
+	quick_test_span_gre_dir gt6 ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "mirror to ip6gre with next-hop remote ($tcflags)"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh b/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh
new file mode 100644
index 000000000..39c03e286
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This is the standard topology for testing mirroring to gretap and ip6gretap
+# netdevices. The tests that use it tweak it in one way or another--importantly,
+# $swp3 and $h3 need to have addresses set up.
+#
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirror                                                   |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3               + gt6 (ip6gretap)      + gt4 (gretap)         |
+#   |     |                     : loc=2001:db8:2::1    : loc=192.0.2.129      |
+#   |     |                     : rem=2001:db8:2::2    : rem=192.0.2.130      |
+#   |     |                     : ttl=100              : ttl=100              |
+#   |     |                     : tos=inherit          : tos=inherit          |
+#   |     |                     :                      :                      |
+#   +-----|---------------------:----------------------:----------------------+
+#         |                     :                      :
+#   +-----|---------------------:----------------------:----------------------+
+#   | H3  + $h3                 + h3-gt6 (ip6gretap)   + h3-gt4 (gretap)      |
+#   |                             loc=2001:db8:2::2      loc=192.0.2.130      |
+#   |                             rem=2001:db8:2::1      rem=192.0.2.129      |
+#   |                             ttl=100                ttl=100              |
+#   |                             tos=inherit            tos=inherit          |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+source "$relative_path/mirror_topo_lib.sh"
+
+mirror_gre_topo_h3_create()
+{
+	mirror_topo_h3_create
+
+	tunnel_create h3-gt4 gretap 192.0.2.130 192.0.2.129
+	ip link set h3-gt4 vrf v$h3
+	matchall_sink_create h3-gt4
+
+	tunnel_create h3-gt6 ip6gretap 2001:db8:2::2 2001:db8:2::1
+	ip link set h3-gt6 vrf v$h3
+	matchall_sink_create h3-gt6
+}
+
+mirror_gre_topo_h3_destroy()
+{
+	tunnel_destroy h3-gt6
+	tunnel_destroy h3-gt4
+
+	mirror_topo_h3_destroy
+}
+
+mirror_gre_topo_switch_create()
+{
+	mirror_topo_switch_create
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	tunnel_create gt6 ip6gretap 2001:db8:2::1 2001:db8:2::2 \
+		      ttl 100 tos inherit allow-localremote
+}
+
+mirror_gre_topo_switch_destroy()
+{
+	tunnel_destroy gt6
+	tunnel_destroy gt4
+
+	mirror_topo_switch_destroy
+}
+
+mirror_gre_topo_create()
+{
+	mirror_topo_h1_create
+	mirror_topo_h2_create
+	mirror_gre_topo_h3_create
+
+	mirror_gre_topo_switch_create
+}
+
+mirror_gre_topo_destroy()
+{
+	mirror_gre_topo_switch_destroy
+
+	mirror_gre_topo_h3_destroy
+	mirror_topo_h2_destroy
+	mirror_topo_h1_destroy
+}
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan.sh
new file mode 100755
index 000000000..88cecdb9a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan.sh
@@ -0,0 +1,92 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# mirror_gre_topo_lib.sh for more details.
+#
+# Test for "tc action mirred egress mirror" that mirrors to a gretap netdevice
+# whose underlay route points at a vlan device.
+
+ALL_TESTS="
+	test_gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip link add name $swp3.555 link $swp3 type vlan id 555
+	ip address add dev $swp3.555 192.0.2.129/32
+	ip address add dev $swp3.555 2001:db8:2::1/128
+	ip link set dev $swp3.555 up
+
+	ip route add 192.0.2.130/32 dev $swp3.555
+	ip -6 route add 2001:db8:2::2/128 dev $swp3.555
+
+	ip link add name $h3.555 link $h3 type vlan id 555
+	ip link set dev $h3.555 master v$h3
+	ip address add dev $h3.555 192.0.2.130/28
+	ip address add dev $h3.555 2001:db8:2::2/64
+	ip link set dev $h3.555 up
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link del dev $h3.555
+	ip link del dev $swp3.555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
new file mode 100755
index 000000000..880e3ab9d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
@@ -0,0 +1,347 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# vlan device on top of a bridge device with vlan filtering (802.1q).
+#
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirred egress mirror dev {gt4,gt6}                       |     |
+#   |     |                                                             |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    br1                          $swp2 +   | |
+#   | |                                                                     | |
+#   | |   + $swp3                                                           | |
+#   | +---|-----------------------------------------------------------------+ |
+#   |     |                        |                                          |
+#   |     |                        + br1.555                                  |
+#   |     |                          192.0.2.130/28                           |
+#   |     |                          2001:db8:2::2/64                         |
+#   |     |                                                                   |
+#   |     |                     + gt6 (ip6gretap)      + gt4 (gretap)         |
+#   |     |                     : loc=2001:db8:2::1    : loc=192.0.2.129      |
+#   |     |                     : rem=2001:db8:2::2    : rem=192.0.2.130      |
+#   |     |                     : ttl=100              : ttl=100              |
+#   |     |                     : tos=inherit          : tos=inherit          |
+#   |     |                     :                      :                      |
+#   +-----|---------------------:----------------------:----------------------+
+#         |                     :                      :
+#   +-----|---------------------:----------------------:----------------------+
+#   | H3  + $h3                 + h3-gt6 (ip6gretap)   + h3-gt4 (gretap)      |
+#   |     |                       loc=2001:db8:2::2      loc=192.0.2.130      |
+#   |     + $h3.555               rem=2001:db8:2::1      rem=192.0.2.129      |
+#   |       192.0.2.130/28        ttl=100                ttl=100              |
+#   |       2001:db8:2::2/64      tos=inherit            tos=inherit          |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+	test_gretap_forbidden_cpu
+	test_ip6gretap_forbidden_cpu
+	test_gretap_forbidden_egress
+	test_ip6gretap_forbidden_egress
+	test_gretap_untagged_egress
+	test_ip6gretap_untagged_egress
+	test_gretap_fdb_roaming
+	test_ip6gretap_fdb_roaming
+	test_gretap_stp
+	test_ip6gretap_stp
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+require_command $ARPING
+
+h3_addr_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+
+	ip addr $add_del dev $dev 192.0.2.130/28
+	ip addr $add_del dev $dev 2001:db8:2::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	# gt4's remote address is at $h3.555, not $h3. Thus the packets arriving
+	# directly to $h3 for test_gretap_untagged_egress() are rejected by
+	# rp_filter and the test spuriously fails.
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$h3.rp_filter 0
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	vlan_create br1 555 "" 192.0.2.129/32 2001:db8:2::1/128
+	bridge vlan add dev br1 vid 555 self
+	ip route rep 192.0.2.130/32 dev br1.555
+	ip -6 route rep 2001:db8:2::2/128 dev br1.555
+
+	vlan_create $h3 555 v$h3
+	h3_addr_add_del add $h3.555
+
+	ip link set dev $swp3 master br1
+	bridge vlan add dev $swp3 vid 555
+	bridge vlan add dev $swp2 vid 555
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp3 nomaster
+
+	h3_addr_add_del del $h3.555
+	vlan_destroy $h3 555
+	vlan_destroy br1 555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+
+	sysctl_restore net.ipv4.conf.$h3.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
+}
+
+test_vlan_match()
+{
+	local tundev=$1; shift
+	local vlan_match=$1; shift
+	local what=$1; shift
+
+	full_test_span_gre_dir_vlan $tundev ingress "$vlan_match" 8 0 "$what"
+	full_test_span_gre_dir_vlan $tundev egress "$vlan_match" 0 8 "$what"
+}
+
+test_gretap()
+{
+	test_vlan_match gt4 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to ip6gretap"
+}
+
+test_span_gre_forbidden_cpu()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	# Run the pass-test first, to prime neighbor table.
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+
+	# Now forbid the VLAN at the bridge and see it fail.
+	bridge vlan del dev br1 vid 555 self
+	sleep 1
+	fail_test_span_gre_dir $tundev ingress
+
+	bridge vlan add dev br1 vid 555 self
+	sleep 1
+	quick_test_span_gre_dir $tundev ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: vlan forbidden at a bridge ($tcflags)"
+}
+
+test_gretap_forbidden_cpu()
+{
+	test_span_gre_forbidden_cpu gt4 "mirror to gretap"
+}
+
+test_ip6gretap_forbidden_cpu()
+{
+	test_span_gre_forbidden_cpu gt6 "mirror to ip6gretap"
+}
+
+test_span_gre_forbidden_egress()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+
+	bridge vlan del dev $swp3 vid 555
+	sleep 1
+	fail_test_span_gre_dir $tundev ingress
+
+	bridge vlan add dev $swp3 vid 555
+	# Re-prime FDB
+	$ARPING -I br1.555 192.0.2.130 -fqc 1
+	sleep 1
+	quick_test_span_gre_dir $tundev ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: vlan forbidden at a bridge egress ($tcflags)"
+}
+
+test_gretap_forbidden_egress()
+{
+	test_span_gre_forbidden_egress gt4 "mirror to gretap"
+}
+
+test_ip6gretap_forbidden_egress()
+{
+	test_span_gre_forbidden_egress gt6 "mirror to ip6gretap"
+}
+
+test_span_gre_untagged_egress()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+
+	quick_test_span_gre_dir $tundev ingress
+	quick_test_span_vlan_dir $h3 555 ingress
+
+	h3_addr_add_del del $h3.555
+	bridge vlan add dev $swp3 vid 555 pvid untagged
+	h3_addr_add_del add $h3
+	sleep 5
+
+	quick_test_span_gre_dir $tundev ingress
+	fail_test_span_vlan_dir $h3 555 ingress
+
+	h3_addr_add_del del $h3
+	bridge vlan add dev $swp3 vid 555
+	h3_addr_add_del add $h3.555
+	sleep 5
+
+	quick_test_span_gre_dir $tundev ingress
+	quick_test_span_vlan_dir $h3 555 ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: vlan untagged at a bridge egress ($tcflags)"
+}
+
+test_gretap_untagged_egress()
+{
+	test_span_gre_untagged_egress gt4 "mirror to gretap"
+}
+
+test_ip6gretap_untagged_egress()
+{
+	test_span_gre_untagged_egress gt6 "mirror to ip6gretap"
+}
+
+test_span_gre_fdb_roaming()
+{
+	local tundev=$1; shift
+	local what=$1; shift
+	local h3mac=$(mac_get $h3)
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	quick_test_span_gre_dir $tundev ingress
+
+	while ((RET == 0)); do
+		bridge fdb del dev $swp3 $h3mac vlan 555 master 2>/dev/null
+		bridge fdb add dev $swp2 $h3mac vlan 555 master static
+		sleep 1
+		fail_test_span_gre_dir $tundev ingress
+
+		if ! bridge fdb sh dev $swp2 vlan 555 master \
+		    | grep -q $h3mac; then
+			printf "TEST: %-60s  [RETRY]\n" \
+				"$what: MAC roaming ($tcflags)"
+			# ARP or ND probably reprimed the FDB while the test
+			# was running. We would get a spurious failure.
+			RET=0
+			continue
+		fi
+		break
+	done
+
+	bridge fdb del dev $swp2 $h3mac vlan 555 master 2>/dev/null
+	# Re-prime FDB
+	$ARPING -I br1.555 192.0.2.130 -fqc 1
+	sleep 1
+	quick_test_span_gre_dir $tundev ingress
+
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: MAC roaming ($tcflags)"
+}
+
+test_gretap_fdb_roaming()
+{
+	test_span_gre_fdb_roaming gt4 "mirror to gretap"
+}
+
+test_ip6gretap_fdb_roaming()
+{
+	test_span_gre_fdb_roaming gt6 "mirror to ip6gretap"
+}
+
+test_gretap_stp()
+{
+	full_test_span_gre_stp gt4 $swp3 "mirror to gretap"
+}
+
+test_ip6gretap_stp()
+{
+	full_test_span_gre_stp gt6 $swp3 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_lib.sh b/tools/testing/selftests/net/forwarding/mirror_lib.sh
new file mode 100644
index 000000000..6406cd76a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_lib.sh
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0
+
+mirror_install()
+{
+	local from_dev=$1; shift
+	local direction=$1; shift
+	local to_dev=$1; shift
+	local filter=$1; shift
+
+	tc filter add dev $from_dev $direction \
+	   pref 1000 $filter \
+	   action mirred egress mirror dev $to_dev
+}
+
+mirror_uninstall()
+{
+	local from_dev=$1; shift
+	local direction=$1; shift
+
+	tc filter del dev $swp1 $direction pref 1000
+}
+
+is_ipv6()
+{
+	local addr=$1; shift
+
+	[[ -z ${addr//[0-9a-fA-F:]/} ]]
+}
+
+mirror_test()
+{
+	local vrf_name=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local dev=$1; shift
+	local pref=$1; shift
+	local expect=$1; shift
+
+	if is_ipv6 $dip; then
+		local proto=-6
+		local type="icmp6 type=128" # Echo request.
+	else
+		local proto=
+		local type="icmp echoreq"
+	fi
+
+	local t0=$(tc_rule_stats_get $dev $pref)
+	$MZ $proto $vrf_name ${sip:+-A $sip} -B $dip -a own -b bc -q \
+	    -c 10 -d 100msec -t $type
+	sleep 0.5
+	local t1=$(tc_rule_stats_get $dev $pref)
+	local delta=$((t1 - t0))
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "Expected to capture $expect packets, got $delta."
+}
+
+do_test_span_dir_ips()
+{
+	local expect=$1; shift
+	local dev=$1; shift
+	local direction=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	icmp_capture_install $dev
+	mirror_test v$h1 $ip1 $ip2 $dev 100 $expect
+	mirror_test v$h2 $ip2 $ip1 $dev 100 $expect
+	icmp_capture_uninstall $dev
+}
+
+quick_test_span_dir_ips()
+{
+	do_test_span_dir_ips 10 "$@"
+}
+
+fail_test_span_dir_ips()
+{
+	do_test_span_dir_ips 0 "$@"
+}
+
+test_span_dir_ips()
+{
+	local dev=$1; shift
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	quick_test_span_dir_ips "$dev" "$direction" "$ip1" "$ip2"
+
+	icmp_capture_install $dev "type $forward_type"
+	mirror_test v$h1 $ip1 $ip2 $dev 100 10
+	icmp_capture_uninstall $dev
+
+	icmp_capture_install $dev "type $backward_type"
+	mirror_test v$h2 $ip2 $ip1 $dev 100 10
+	icmp_capture_uninstall $dev
+}
+
+fail_test_span_dir()
+{
+	fail_test_span_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+test_span_dir()
+{
+	test_span_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+do_test_span_vlan_dir_ips()
+{
+	local expect=$1; shift
+	local dev=$1; shift
+	local vid=$1; shift
+	local direction=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+
+	# Install the capture as skip_hw to avoid double-counting of packets.
+	# The traffic is meant for local box anyway, so will be trapped to
+	# kernel.
+	vlan_capture_install $dev "skip_hw vlan_id $vid vlan_ethtype ip"
+	mirror_test v$h1 $ip1 $ip2 $dev 100 $expect
+	mirror_test v$h2 $ip2 $ip1 $dev 100 $expect
+	vlan_capture_uninstall $dev
+}
+
+quick_test_span_vlan_dir_ips()
+{
+	do_test_span_vlan_dir_ips 10 "$@"
+}
+
+fail_test_span_vlan_dir_ips()
+{
+	do_test_span_vlan_dir_ips 0 "$@"
+}
+
+quick_test_span_vlan_dir()
+{
+	quick_test_span_vlan_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
+
+fail_test_span_vlan_dir()
+{
+	fail_test_span_vlan_dir_ips "$@" 192.0.2.1 192.0.2.2
+}
diff --git a/tools/testing/selftests/net/forwarding/mirror_topo_lib.sh b/tools/testing/selftests/net/forwarding/mirror_topo_lib.sh
new file mode 100644
index 000000000..04979e596
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_topo_lib.sh
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This is the standard topology for testing mirroring. The tests that use it
+# tweak it in one way or another--typically add more devices to the topology.
+#
+#   +---------------------+                             +---------------------+
+#   | H1                  |                             |                  H2 |
+#   |     + $h1           |                             |           $h2 +     |
+#   |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#   +-----|---------------+                             +---------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirror                                                   |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3                                                             |
+#   +-----|-------------------------------------------------------------------+
+#         |
+#   +-----|-------------------------------------------------------------------+
+#   | H3  + $h3                                                               |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+mirror_topo_h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+mirror_topo_h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+mirror_topo_h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+}
+
+mirror_topo_h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+mirror_topo_h3_create()
+{
+	simple_if_init $h3
+	tc qdisc add dev $h3 clsact
+}
+
+mirror_topo_h3_destroy()
+{
+	tc qdisc del dev $h3 clsact
+	simple_if_fini $h3
+}
+
+mirror_topo_switch_create()
+{
+	ip link set dev $swp3 up
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+}
+
+mirror_topo_switch_destroy()
+{
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp1 down
+	ip link set dev $swp2 down
+	ip link del dev br1
+
+	ip link set dev $swp3 down
+}
+
+mirror_topo_create()
+{
+	mirror_topo_h1_create
+	mirror_topo_h2_create
+	mirror_topo_h3_create
+
+	mirror_topo_switch_create
+}
+
+mirror_topo_destroy()
+{
+	mirror_topo_switch_destroy
+
+	mirror_topo_h3_destroy
+	mirror_topo_h2_destroy
+	mirror_topo_h1_destroy
+}
diff --git a/tools/testing/selftests/net/forwarding/mirror_vlan.sh b/tools/testing/selftests/net/forwarding/mirror_vlan.sh
new file mode 100755
index 000000000..9ab2ce77b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_vlan.sh
@@ -0,0 +1,131 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing mirroring. See mirror_topo_lib.sh
+# for more details.
+#
+# Test for "tc action mirred egress mirror" that mirrors to a vlan device.
+
+ALL_TESTS="
+	test_vlan
+	test_tagged_vlan
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_topo_create
+
+	vlan_create $swp3 555
+
+	vlan_create $h3 555 v$h3
+	matchall_sink_create $h3.555
+
+	vlan_create $h1 111 v$h1 192.0.2.17/28
+	bridge vlan add dev $swp1 vid 111
+
+	vlan_create $h2 111 v$h2 192.0.2.18/28
+	bridge vlan add dev $swp2 vid 111
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	vlan_destroy $h2 111
+	vlan_destroy $h1 111
+	vlan_destroy $h3 555
+	vlan_destroy $swp3 555
+
+	mirror_topo_destroy
+	vrf_cleanup
+}
+
+test_vlan_dir()
+{
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $swp3.555 "matchall $tcflags"
+	test_span_dir "$h3.555" "$direction" "$forward_type" "$backward_type"
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction mirror to vlan ($tcflags)"
+}
+
+test_vlan()
+{
+	test_vlan_dir ingress 8 0
+	test_vlan_dir egress 0 8
+}
+
+test_tagged_vlan_dir()
+{
+	local direction=$1; shift
+	local forward_type=$1; shift
+	local backward_type=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 $direction $swp3.555 "matchall $tcflags"
+	do_test_span_vlan_dir_ips 10 "$h3.555" 111 "$direction" \
+				  192.0.2.17 192.0.2.18
+	do_test_span_vlan_dir_ips  0 "$h3.555" 555 "$direction" \
+				  192.0.2.17 192.0.2.18
+	mirror_uninstall $swp1 $direction
+
+	log_test "$direction mirror tagged to vlan ($tcflags)"
+}
+
+test_tagged_vlan()
+{
+	test_tagged_vlan_dir ingress 8 0
+	test_tagged_vlan_dir egress 0 8
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+	trap_install $h3 ingress
+
+	tests_run
+
+	trap_uninstall $h3 ingress
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/pedit_dsfield.sh b/tools/testing/selftests/net/forwarding/pedit_dsfield.sh
new file mode 100755
index 000000000..64fbd211d
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/pedit_dsfield.sh
@@ -0,0 +1,311 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on
+# egress of $swp2, the traffic is acted upon by a pedit action. An ingress
+# filter installed on $h2 verifies that the packet looks like expected.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	test_ip_dsfield
+	test_ip_dscp
+	test_ip_ecn
+	test_ip_dscp_ecn
+	test_ip6_dsfield
+	test_ip6_dscp
+	test_ip6_ecn
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+: ${HIT_TIMEOUT:=2000} # ms
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add name br1 up type bridge vlan_filtering 1
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+do_test_pedit_dsfield_common()
+{
+	local pedit_locus=$1; shift
+	local pedit_action=$1; shift
+	local mz_flags=$1; shift
+
+	RET=0
+
+	# TOS 125: DSCP 31, ECN 1. Used for testing that the relevant part is
+	# overwritten when zero is selected.
+	$MZ $mz_flags $h1 -c 10 -d 20msec -p 100 \
+	    -a own -b $h2mac -q -t tcp tos=0x7d,sp=54321,dp=12345
+
+	local pkts
+	pkts=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= 10" \
+			tc_rule_handle_stats_get "dev $h2 ingress" 101)
+	check_err $? "Expected to get 10 packets on test probe, but got $pkts."
+
+	pkts=$(tc_rule_handle_stats_get "$pedit_locus" 101)
+	((pkts >= 10))
+	check_err $? "Expected to get 10 packets on pedit rule, but got $pkts."
+
+	log_test "$pedit_locus pedit $pedit_action"
+}
+
+do_test_pedit_dsfield()
+{
+	local pedit_locus=$1; shift
+	local pedit_action=$1; shift
+	local match_prot=$1; shift
+	local match_flower=$1; shift
+	local mz_flags=$1; shift
+	local saddr=$1; shift
+	local daddr=$1; shift
+
+	tc filter add $pedit_locus handle 101 pref 1 \
+	   flower action pedit ex munge $pedit_action
+	tc filter add dev $h2 ingress handle 101 pref 1 prot $match_prot \
+	   flower skip_hw $match_flower action pass
+
+	do_test_pedit_dsfield_common "$pedit_locus" "$pedit_action" "$mz_flags"
+
+	tc filter del dev $h2 ingress pref 1
+	tc filter del $pedit_locus pref 1
+}
+
+do_test_ip_dsfield()
+{
+	local locus=$1; shift
+	local dsfield
+
+	for dsfield in 0 1 2 3 128 252 253 254 255; do
+		do_test_pedit_dsfield "$locus"				\
+				      "ip dsfield set $dsfield"		\
+				      ip "ip_tos $dsfield"		\
+				      "-A 192.0.2.1 -B 192.0.2.2"
+	done
+}
+
+test_ip_dsfield()
+{
+	do_test_ip_dsfield "dev $swp1 ingress"
+	do_test_ip_dsfield "dev $swp2 egress"
+}
+
+do_test_ip_dscp()
+{
+	local locus=$1; shift
+	local dscp
+
+	for dscp in 0 1 2 3 32 61 62 63; do
+		do_test_pedit_dsfield "$locus"				       \
+				  "ip dsfield set $((dscp << 2)) retain 0xfc"  \
+				  ip "ip_tos $(((dscp << 2) | 1))"	       \
+				  "-A 192.0.2.1 -B 192.0.2.2"
+	done
+}
+
+test_ip_dscp()
+{
+	do_test_ip_dscp "dev $swp1 ingress"
+	do_test_ip_dscp "dev $swp2 egress"
+}
+
+do_test_ip_ecn()
+{
+	local locus=$1; shift
+	local ecn
+
+	for ecn in 0 1 2 3; do
+		do_test_pedit_dsfield "$locus"				\
+				      "ip dsfield set $ecn retain 0x03"	\
+				      ip "ip_tos $((124 | $ecn))"	\
+				      "-A 192.0.2.1 -B 192.0.2.2"
+	done
+}
+
+test_ip_ecn()
+{
+	do_test_ip_ecn "dev $swp1 ingress"
+	do_test_ip_ecn "dev $swp2 egress"
+}
+
+do_test_ip_dscp_ecn()
+{
+	local locus=$1; shift
+
+	tc filter add $locus handle 101 pref 1				\
+	   flower action pedit ex munge ip dsfield set 124 retain 0xfc	\
+		  action pedit ex munge ip dsfield set 1 retain 0x03
+	tc filter add dev $h2 ingress handle 101 pref 1 prot ip		\
+	   flower skip_hw ip_tos 125 action pass
+
+	do_test_pedit_dsfield_common "$locus" "set DSCP + set ECN"	\
+				      "-A 192.0.2.1 -B 192.0.2.2"
+
+	tc filter del dev $h2 ingress pref 1
+	tc filter del $locus pref 1
+}
+
+test_ip_dscp_ecn()
+{
+	do_test_ip_dscp_ecn "dev $swp1 ingress"
+	do_test_ip_dscp_ecn "dev $swp2 egress"
+}
+
+do_test_ip6_dsfield()
+{
+	local locus=$1; shift
+	local dsfield
+
+	for dsfield in 0 1 2 3 128 252 253 254 255; do
+		do_test_pedit_dsfield "$locus"				\
+				  "ip6 traffic_class set $dsfield"	\
+				  ipv6 "ip_tos $dsfield"		\
+				  "-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_dsfield()
+{
+	do_test_ip6_dsfield "dev $swp1 ingress"
+	do_test_ip6_dsfield "dev $swp2 egress"
+}
+
+do_test_ip6_dscp()
+{
+	local locus=$1; shift
+	local dscp
+
+	for dscp in 0 1 2 3 32 61 62 63; do
+		do_test_pedit_dsfield "$locus"				       \
+			    "ip6 traffic_class set $((dscp << 2)) retain 0xfc" \
+			    ipv6 "ip_tos $(((dscp << 2) | 1))"		       \
+			    "-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_dscp()
+{
+	do_test_ip6_dscp "dev $swp1 ingress"
+	do_test_ip6_dscp "dev $swp2 egress"
+}
+
+do_test_ip6_ecn()
+{
+	local locus=$1; shift
+	local ecn
+
+	for ecn in 0 1 2 3; do
+		do_test_pedit_dsfield "$locus"				\
+				"ip6 traffic_class set $ecn retain 0x3"	\
+				ipv6 "ip_tos $((124 | $ecn))"		\
+				"-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
+	done
+}
+
+test_ip6_ecn()
+{
+	do_test_ip6_ecn "dev $swp1 ingress"
+	do_test_ip6_ecn "dev $swp2 egress"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/pedit_l4port.sh b/tools/testing/selftests/net/forwarding/pedit_l4port.sh
new file mode 100755
index 000000000..10e594c55
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/pedit_l4port.sh
@@ -0,0 +1,200 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on egress of $swp2, the
+# traffic is acted upon by a pedit action. An ingress filter installed on $h2 verifies that the
+# packet looks like expected.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_udp_sport
+	test_udp_dport
+	test_tcp_sport
+	test_tcp_dport
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+: ${HIT_TIMEOUT:=2000} # ms
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add name br1 up type bridge vlan_filtering 1
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:1::2
+}
+
+do_test_pedit_l4port_one()
+{
+	local pedit_locus=$1; shift
+	local pedit_prot=$1; shift
+	local pedit_action=$1; shift
+	local match_prot=$1; shift
+	local match_flower=$1; shift
+	local mz_flags=$1; shift
+	local saddr=$1; shift
+	local daddr=$1; shift
+
+	tc filter add $pedit_locus handle 101 pref 1 \
+	   flower action pedit ex munge $pedit_action
+	tc filter add dev $h2 ingress handle 101 pref 1 prot $match_prot \
+	   flower skip_hw $match_flower action pass
+
+	RET=0
+
+	$MZ $mz_flags $h1 -c 10 -d 20msec -p 100 \
+	    -a own -b $h2mac -q -t $pedit_prot sp=54321,dp=12345
+
+	local pkts
+	pkts=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= 10" \
+			tc_rule_handle_stats_get "dev $h2 ingress" 101)
+	check_err $? "Expected to get 10 packets, but got $pkts."
+
+	pkts=$(tc_rule_handle_stats_get "$pedit_locus" 101)
+	((pkts >= 10))
+	check_err $? "Expected to get 10 packets on pedit rule, but got $pkts."
+
+	log_test "$pedit_locus pedit $pedit_action"
+
+	tc filter del dev $h2 ingress pref 1
+	tc filter del $pedit_locus pref 1
+}
+
+do_test_pedit_l4port()
+{
+	local locus=$1; shift
+	local prot=$1; shift
+	local pedit_port=$1; shift
+	local flower_port=$1; shift
+	local port
+
+	for port in 1 11111 65535; do
+		do_test_pedit_l4port_one "$locus" "$prot"			\
+					 "$prot $pedit_port set $port"		\
+					 ip "ip_proto $prot $flower_port $port"	\
+					 "-A 192.0.2.1 -B 192.0.2.2"
+	done
+}
+
+test_udp_sport()
+{
+	do_test_pedit_l4port "dev $swp1 ingress" udp sport src_port
+	do_test_pedit_l4port "dev $swp2 egress"  udp sport src_port
+}
+
+test_udp_dport()
+{
+	do_test_pedit_l4port "dev $swp1 ingress" udp dport dst_port
+	do_test_pedit_l4port "dev $swp2 egress"  udp dport dst_port
+}
+
+test_tcp_sport()
+{
+	do_test_pedit_l4port "dev $swp1 ingress" tcp sport src_port
+	do_test_pedit_l4port "dev $swp2 egress"  tcp sport src_port
+}
+
+test_tcp_dport()
+{
+	do_test_pedit_l4port "dev $swp1 ingress" tcp dport dst_port
+	do_test_pedit_l4port "dev $swp2 egress"  tcp dport dst_port
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router.sh b/tools/testing/selftests/net/forwarding/router.sh
new file mode 100755
index 000000000..057f91b05
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router.sh
@@ -0,0 +1,322 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	sip_in_class_e
+	mc_mac_mismatch
+	ipv4_sip_equal_dip
+	ipv6_sip_equal_dip
+	ipv4_dip_link_local
+"
+
+NUM_NETIFS=4
+source lib.sh
+source tc_common.sh
+
+require_command $MCD
+require_command $MC_CLI
+table_name=selftests
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+	ip address add 2001:db8:1::2/64 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 2001:db8:1::2/64 dev $h1
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+	ip address add 2001:db8:2::2/64 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 2001:db8:2::2/64 dev $h2
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+
+	tc qdisc add dev $rp2 clsact
+
+	ip address add 192.0.2.1/24 dev $rp1
+	ip address add 2001:db8:1::1/64 dev $rp1
+
+	ip address add 198.51.100.1/24 dev $rp2
+	ip address add 2001:db8:2::1/64 dev $rp2
+}
+
+router_destroy()
+{
+	ip address del 2001:db8:2::1/64 dev $rp2
+	ip address del 198.51.100.1/24 dev $rp2
+
+	ip address del 2001:db8:1::1/64 dev $rp1
+	ip address del 192.0.2.1/24 dev $rp1
+
+	tc qdisc del dev $rp2 clsact
+
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+start_mcd()
+{
+	SMCROUTEDIR="$(mktemp -d)"
+
+	for ((i = 1; i <= $NUM_NETIFS; ++i)); do
+		echo "phyint ${NETIFS[p$i]} enable" >> \
+			$SMCROUTEDIR/$table_name.conf
+	done
+
+	$MCD -N -I $table_name -f $SMCROUTEDIR/$table_name.conf \
+		-P $SMCROUTEDIR/$table_name.pid
+}
+
+kill_mcd()
+{
+	pkill $MCD
+	rm -rf $SMCROUTEDIR
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1mac=$(mac_get $rp1)
+
+	start_mcd
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	kill_mcd
+}
+
+ping_ipv4()
+{
+	ping_test $h1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+sip_in_class_e()
+{
+	RET=0
+
+	# Disable rpfilter to prevent packets to be dropped because of it.
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$rp1.rp_filter 0
+
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \
+		flower src_ip 240.0.0.1 ip_proto udp action pass
+
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec \
+		-A 240.0.0.1 -b $rp1mac -B 198.51.100.2 -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "Source IP in class E"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+	sysctl_restore net.ipv4.conf.$rp1.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
+}
+
+create_mcast_sg()
+{
+	local if_name=$1; shift
+	local s_addr=$1; shift
+	local mcast=$1; shift
+	local dest_ifs=${@}
+
+	$MC_CLI -I $table_name add $if_name $s_addr $mcast $dest_ifs
+}
+
+delete_mcast_sg()
+{
+	local if_name=$1; shift
+	local s_addr=$1; shift
+	local mcast=$1; shift
+	local dest_ifs=${@}
+
+	$MC_CLI -I $table_name remove $if_name $s_addr $mcast $dest_ifs
+}
+
+__mc_mac_mismatch()
+{
+	local desc=$1; shift
+	local proto=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local flags=${1:-""}; shift
+	local dmac=01:02:03:04:05:06
+
+	RET=0
+
+	tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \
+		flower dst_ip $dip action pass
+
+	create_mcast_sg $rp1 $sip $dip $rp2
+
+	$MZ $flags $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec -b $dmac \
+		-B $dip -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "Multicast MAC mismatch: $desc"
+
+	delete_mcast_sg $rp1 $sip $dip $rp2
+	tc filter del dev $rp2 egress protocol $proto pref 1 handle 101 flower
+}
+
+mc_mac_mismatch()
+{
+	__mc_mac_mismatch "IPv4" "ip" 192.0.2.2 225.1.2.3
+	__mc_mac_mismatch "IPv6" "ipv6" 2001:db8:1::2 ff0e::3 "-6"
+}
+
+ipv4_sip_equal_dip()
+{
+	RET=0
+
+	# Disable rpfilter to prevent packets to be dropped because of it.
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$rp1.rp_filter 0
+
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \
+		flower src_ip 198.51.100.2  action pass
+
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec \
+		-A 198.51.100.2 -b $rp1mac -B 198.51.100.2 -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "Source IP is equal to destination IP: IPv4"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+	sysctl_restore net.ipv4.conf.$rp1.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
+}
+
+ipv6_sip_equal_dip()
+{
+	RET=0
+
+	tc filter add dev $rp2 egress protocol ipv6 pref 1 handle 101 \
+		flower src_ip 2001:db8:2::2 action pass
+
+	$MZ -6 $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec \
+		-A 2001:db8:2::2 -b $rp1mac -B 2001:db8:2::2 -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "Source IP is equal to destination IP: IPv6"
+
+	tc filter del dev $rp2 egress protocol ipv6 pref 1 handle 101 flower
+}
+
+ipv4_dip_link_local()
+{
+	local dip=169.254.1.1
+
+	RET=0
+
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 \
+		flower dst_ip $dip action pass
+
+	ip neigh add 169.254.1.1 lladdr 00:11:22:33:44:55 dev $rp2
+	ip route add 169.254.1.0/24 dev $rp2
+
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 5 -d 1msec -b $rp1mac -B $dip -q
+
+	tc_check_packets "dev $rp2 egress" 101 5
+	check_err $? "Packets were dropped"
+
+	log_test "IPv4 destination IP is link-local"
+
+	ip route del 169.254.1.0/24 dev $rp2
+	ip neigh del 169.254.1.1 lladdr 00:11:22:33:44:55 dev $rp2
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge.sh b/tools/testing/selftests/net/forwarding/router_bridge.sh
new file mode 100755
index 000000000..ebc596a27
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge.sh
@@ -0,0 +1,113 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
new file mode 100755
index 000000000..fa6a88c50
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	vlan
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 555 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	vlan_destroy $h1 555
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	bridge vlan add dev br1 vid 555 self pvid untagged
+	bridge vlan add dev $swp1 vid 555
+
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+vlan()
+{
+	RET=0
+
+	bridge vlan add dev br1 vid 333 self
+	check_err $? "Can't add a non-PVID VLAN"
+	bridge vlan del dev br1 vid 333 self
+	check_err $? "Can't remove a non-PVID VLAN"
+
+	log_test "vlan"
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_broadcast.sh b/tools/testing/selftests/net/forwarding/router_broadcast.sh
new file mode 100755
index 000000000..4eac0a06f
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_broadcast.sh
@@ -0,0 +1,237 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4"
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 198.51.200.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+}
+
+h1_destroy()
+{
+	ip route del 198.51.200.0/24 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 198.51.200.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+}
+
+h2_destroy()
+{
+	ip route del 198.51.200.0/24 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+h3_create()
+{
+	vrf_create "vrf-h3"
+	ip link set dev $h3 master vrf-h3
+
+	ip link set dev vrf-h3 up
+	ip link set dev $h3 up
+
+	ip address add 198.51.200.2/24 dev $h3
+
+	ip route add 192.0.2.0/24 vrf vrf-h3 nexthop via 198.51.200.1
+	ip route add 198.51.100.0/24 vrf vrf-h3 nexthop via 198.51.200.1
+}
+
+h3_destroy()
+{
+	ip route del 198.51.100.0/24 vrf vrf-h3
+	ip route del 192.0.2.0/24 vrf vrf-h3
+
+	ip address del 198.51.200.2/24 dev $h3
+
+	ip link set dev $h3 down
+	vrf_destroy "vrf-h3"
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	ip address add 192.0.2.1/24 dev $rp1
+
+	ip address add 198.51.100.1/24 dev $rp2
+	ip address add 198.51.200.1/24 dev $rp3
+}
+
+router_destroy()
+{
+	ip address del 198.51.200.1/24 dev $rp3
+	ip address del 198.51.100.1/24 dev $rp2
+
+	ip address del 192.0.2.1/24 dev $rp1
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+bc_forwarding_disable()
+{
+	sysctl_set net.ipv4.conf.all.bc_forwarding 0
+	sysctl_set net.ipv4.conf.$rp1.bc_forwarding 0
+	sysctl_set net.ipv4.conf.$rp2.bc_forwarding 0
+}
+
+bc_forwarding_enable()
+{
+	sysctl_set net.ipv4.conf.all.bc_forwarding 1
+	sysctl_set net.ipv4.conf.$rp1.bc_forwarding 1
+	sysctl_set net.ipv4.conf.$rp2.bc_forwarding 1
+}
+
+bc_forwarding_restore()
+{
+	sysctl_restore net.ipv4.conf.$rp2.bc_forwarding
+	sysctl_restore net.ipv4.conf.$rp1.bc_forwarding
+	sysctl_restore net.ipv4.conf.all.bc_forwarding
+}
+
+ping_test_from()
+{
+	local oif=$1
+	local dip=$2
+	local from=$3
+	local fail=${4:-0}
+
+	RET=0
+
+	log_info "ping $dip, expected reply from $from"
+	ip vrf exec $(master_name_get $oif) \
+		$PING -I $oif $dip -c 10 -i 0.1 -w $PING_TIMEOUT -b 2>&1 \
+		| grep "bytes from $from" > /dev/null
+	check_err_fail $fail $?
+}
+
+ping_ipv4()
+{
+	sysctl_set net.ipv4.icmp_echo_ignore_broadcasts 0
+
+	bc_forwarding_disable
+	log_info "bc_forwarding disabled on r1 =>"
+	ping_test_from $h1 198.51.100.255 192.0.2.1
+	log_test "h1 -> net2: reply from r1 (not forwarding)"
+	ping_test_from $h1 198.51.200.255 192.0.2.1
+	log_test "h1 -> net3: reply from r1 (not forwarding)"
+	ping_test_from $h1 192.0.2.255 192.0.2.1
+	log_test "h1 -> net1: reply from r1 (not dropping)"
+	ping_test_from $h1 255.255.255.255 192.0.2.1
+	log_test "h1 -> 255.255.255.255: reply from r1 (not forwarding)"
+
+	ping_test_from $h2 192.0.2.255 198.51.100.1
+	log_test "h2 -> net1: reply from r1 (not forwarding)"
+	ping_test_from $h2 198.51.200.255 198.51.100.1
+	log_test "h2 -> net3: reply from r1 (not forwarding)"
+	ping_test_from $h2 198.51.100.255 198.51.100.1
+	log_test "h2 -> net2: reply from r1 (not dropping)"
+	ping_test_from $h2 255.255.255.255 198.51.100.1
+	log_test "h2 -> 255.255.255.255: reply from r1 (not forwarding)"
+	bc_forwarding_restore
+
+	bc_forwarding_enable
+	log_info "bc_forwarding enabled on r1 =>"
+	ping_test_from $h1 198.51.100.255 198.51.100.2
+	log_test "h1 -> net2: reply from h2 (forwarding)"
+	ping_test_from $h1 198.51.200.255 198.51.200.2
+	log_test "h1 -> net3: reply from h3 (forwarding)"
+	ping_test_from $h1 192.0.2.255 192.0.2.1 1
+	log_test "h1 -> net1: no reply (dropping)"
+	ping_test_from $h1 255.255.255.255 192.0.2.1
+	log_test "h1 -> 255.255.255.255: reply from r1 (not forwarding)"
+
+	ping_test_from $h2 192.0.2.255 192.0.2.2
+	log_test "h2 -> net1: reply from h1 (forwarding)"
+	ping_test_from $h2 198.51.200.255 198.51.200.2
+	log_test "h2 -> net3: reply from h3 (forwarding)"
+	ping_test_from $h2 198.51.100.255 198.51.100.1 1
+	log_test "h2 -> net2: no reply (dropping)"
+	ping_test_from $h2 255.255.255.255 198.51.100.1
+	log_test "h2 -> 255.255.255.255: reply from r1 (not forwarding)"
+	bc_forwarding_restore
+
+	sysctl_restore net.ipv4.icmp_echo_ignore_broadcasts
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_mpath_nh.sh b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
new file mode 100755
index 000000000..7fcc42bc0
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_mpath_nh.sh
@@ -0,0 +1,359 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 multipath_test"
+NUM_NETIFS=8
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+	ip address add 2001:db8:1::2/64 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 2001:db8:1::2/64 dev $h1
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+	ip address add 2001:db8:2::2/64 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 2001:db8:2::2/64 dev $h2
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router1_create()
+{
+	vrf_create "vrf-r1"
+	ip link set dev $rp11 master vrf-r1
+	ip link set dev $rp12 master vrf-r1
+	ip link set dev $rp13 master vrf-r1
+
+	ip link set dev vrf-r1 up
+	ip link set dev $rp11 up
+	ip link set dev $rp12 up
+	ip link set dev $rp13 up
+
+	ip address add 192.0.2.1/24 dev $rp11
+	ip address add 2001:db8:1::1/64 dev $rp11
+
+	ip address add 169.254.2.12/24 dev $rp12
+	ip address add fe80:2::12/64 dev $rp12
+
+	ip address add 169.254.3.13/24 dev $rp13
+	ip address add fe80:3::13/64 dev $rp13
+}
+
+router1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-r1
+	ip route del 198.51.100.0/24 vrf vrf-r1
+
+	ip address del fe80:3::13/64 dev $rp13
+	ip address del 169.254.3.13/24 dev $rp13
+
+	ip address del fe80:2::12/64 dev $rp12
+	ip address del 169.254.2.12/24 dev $rp12
+
+	ip address del 2001:db8:1::1/64 dev $rp11
+	ip address del 192.0.2.1/24 dev $rp11
+
+	ip nexthop del id 103
+	ip nexthop del id 101
+	ip nexthop del id 102
+	ip nexthop del id 106
+	ip nexthop del id 104
+	ip nexthop del id 105
+
+	ip link set dev $rp13 down
+	ip link set dev $rp12 down
+	ip link set dev $rp11 down
+
+	vrf_destroy "vrf-r1"
+}
+
+router2_create()
+{
+	vrf_create "vrf-r2"
+	ip link set dev $rp21 master vrf-r2
+	ip link set dev $rp22 master vrf-r2
+	ip link set dev $rp23 master vrf-r2
+
+	ip link set dev vrf-r2 up
+	ip link set dev $rp21 up
+	ip link set dev $rp22 up
+	ip link set dev $rp23 up
+
+	ip address add 198.51.100.1/24 dev $rp21
+	ip address add 2001:db8:2::1/64 dev $rp21
+
+	ip address add 169.254.2.22/24 dev $rp22
+	ip address add fe80:2::22/64 dev $rp22
+
+	ip address add 169.254.3.23/24 dev $rp23
+	ip address add fe80:3::23/64 dev $rp23
+}
+
+router2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-r2
+	ip route del 192.0.2.0/24 vrf vrf-r2
+
+	ip address del fe80:3::23/64 dev $rp23
+	ip address del 169.254.3.23/24 dev $rp23
+
+	ip address del fe80:2::22/64 dev $rp22
+	ip address del 169.254.2.22/24 dev $rp22
+
+	ip address del 2001:db8:2::1/64 dev $rp21
+	ip address del 198.51.100.1/24 dev $rp21
+
+	ip nexthop del id 201
+	ip nexthop del id 202
+	ip nexthop del id 204
+	ip nexthop del id 205
+
+	ip link set dev $rp23 down
+	ip link set dev $rp22 down
+	ip link set dev $rp21 down
+
+	vrf_destroy "vrf-r2"
+}
+
+routing_nh_obj()
+{
+	ip nexthop add id 101 via 169.254.2.22 dev $rp12
+	ip nexthop add id 102 via 169.254.3.23 dev $rp13
+	ip nexthop add id 103 group 101/102
+	ip route add 198.51.100.0/24 vrf vrf-r1 nhid 103
+
+	ip nexthop add id 104 via fe80:2::22 dev $rp12
+	ip nexthop add id 105 via fe80:3::23 dev $rp13
+	ip nexthop add id 106 group 104/105
+	ip route add 2001:db8:2::/64 vrf vrf-r1 nhid 106
+
+	ip nexthop add id 201 via 169.254.2.12 dev $rp22
+	ip nexthop add id 202 via 169.254.3.13 dev $rp23
+	ip nexthop add id 203 group 201/202
+	ip route add 192.0.2.0/24 vrf vrf-r2 nhid 203
+
+	ip nexthop add id 204 via fe80:2::12 dev $rp22
+	ip nexthop add id 205 via fe80:3::13 dev $rp23
+	ip nexthop add id 206 group 204/205
+	ip route add 2001:db8:1::/64 vrf vrf-r2 nhid 206
+}
+
+multipath4_test()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+	local packets_rp12 packets_rp13
+
+	# Transmit multiple flows from h1 to h2 and make sure they are
+	# distributed between both multipath links (rp12 and rp13)
+	# according to the configured weights.
+	sysctl_set net.ipv4.fib_multipath_hash_policy 1
+	ip nexthop replace id 103 group 101,$weight_rp12/102,$weight_rp13
+
+	t0_rp12=$(link_stats_tx_packets_get $rp12)
+	t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+	ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \
+		-d 1msec -t udp "sp=1024,dp=0-32768"
+
+	t1_rp12=$(link_stats_tx_packets_get $rp12)
+	t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+	let "packets_rp12 = $t1_rp12 - $t0_rp12"
+	let "packets_rp13 = $t1_rp13 - $t0_rp13"
+	multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+	# Restore settings.
+	ip nexthop replace id 103 group 101/102
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+	local packets_rp12 packets_rp13
+
+	# Transmit multiple flows from h1 to h2 and make sure they are
+	# distributed between both multipath links (rp12 and rp13)
+	# according to the configured weights.
+	sysctl_set net.ipv6.fib_multipath_hash_policy 1
+
+	ip nexthop replace id 106 group 104,$weight_rp12/105,$weight_rp13
+
+	t0_rp12=$(link_stats_tx_packets_get $rp12)
+	t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+	$MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \
+		-d 1msec -t udp "sp=1024,dp=0-32768"
+
+	t1_rp12=$(link_stats_tx_packets_get $rp12)
+	t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+	let "packets_rp12 = $t1_rp12 - $t0_rp12"
+	let "packets_rp13 = $t1_rp13 - $t0_rp13"
+	multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+	ip nexthop replace id 106 group 104/105
+
+	sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+	local packets_rp12 packets_rp13
+
+	ip nexthop replace id 106 group 104,$weight_rp12/105,$weight_rp13
+
+	t0_rp12=$(link_stats_tx_packets_get $rp12)
+	t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+	# Generate 16384 echo requests, each with a random flow label.
+	for _ in $(seq 1 16384); do
+		ip vrf exec vrf-h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q >/dev/null 2>&1
+	done
+
+	t1_rp12=$(link_stats_tx_packets_get $rp12)
+	t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+	let "packets_rp12 = $t1_rp12 - $t0_rp12"
+	let "packets_rp13 = $t1_rp13 - $t0_rp13"
+	multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+	ip nexthop replace id 106 group 104/105
+}
+
+multipath_test()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+
+	log_info "Running IPv6 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+
+	log_info "Running IPv6 L4 hash multipath tests"
+	multipath6_l4_test "ECMP" 1 1
+	multipath6_l4_test "Weighted MP 2:1" 2 1
+	multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp11=${NETIFS[p2]}
+
+	rp12=${NETIFS[p3]}
+	rp22=${NETIFS[p4]}
+
+	rp13=${NETIFS[p5]}
+	rp23=${NETIFS[p6]}
+
+	rp21=${NETIFS[p7]}
+	h2=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router1_create
+	router2_create
+	routing_nh_obj
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router2_destroy
+	router1_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+ip nexthop ls >/dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "Nexthop objects not supported; skipping tests"
+	exit 0
+fi
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+routing_nh_obj
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_multicast.sh b/tools/testing/selftests/net/forwarding/router_multicast.sh
new file mode 100755
index 000000000..57e90c873
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_multicast.sh
@@ -0,0 +1,416 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +------------------+
+# | H1 (v$h1)        |
+# | 2001:db8:1::2/64 |
+# | 198.51.100.2/28  |
+# |         $h1 +    |
+# +-------------|----+
+#               |
+# +-------------|-------------------------------+
+# | SW1         |                               |
+# |        $rp1 +                               |
+# | 198.51.100.1/28                             |
+# | 2001:db8:1::1/64                            |
+# |                                             |
+# | 2001:db8:2::1/64           2001:db8:3::1/64 |
+# | 198.51.100.17/28           198.51.100.33/28 |
+# |         $rp2 +                     $rp3 +   |
+# +--------------|--------------------------|---+
+#                |                          |
+#                |                          |
+# +--------------|---+       +--------------|---+
+# | H2 (v$h2)    |   |       | H3 (v$h3)    |   |
+# |          $h2 +   |       |          $h3 +   |
+# | 198.51.100.18/28 |       | 198.51.100.34/28 |
+# | 2001:db8:2::2/64 |       | 2001:db8:3::2/64 |
+# +------------------+       +------------------+
+#
+
+ALL_TESTS="mcast_v4 mcast_v6 rpf_v4 rpf_v6"
+NUM_NETIFS=6
+source lib.sh
+source tc_common.sh
+
+require_command $MCD
+require_command $MC_CLI
+table_name=selftests
+
+h1_create()
+{
+	simple_if_init $h1 198.51.100.2/28 2001:db8:1::2/64
+
+	ip route add 198.51.100.16/28 vrf v$h1 nexthop via 198.51.100.1
+	ip route add 198.51.100.32/28 vrf v$h1 nexthop via 198.51.100.1
+
+	ip route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::1
+	ip route add 2001:db8:3::/64 vrf v$h1 nexthop via 2001:db8:1::1
+
+	tc qdisc add dev $h1 ingress
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 ingress
+
+	ip route del 2001:db8:3::/64 vrf v$h1
+	ip route del 2001:db8:2::/64 vrf v$h1
+
+	ip route del 198.51.100.32/28 vrf v$h1
+	ip route del 198.51.100.16/28 vrf v$h1
+
+	simple_if_fini $h1 198.51.100.2/28 2001:db8:1::2/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 198.51.100.18/28 2001:db8:2::2/64
+
+	ip route add 198.51.100.0/28 vrf v$h2 nexthop via 198.51.100.17
+	ip route add 198.51.100.32/28 vrf v$h2 nexthop via 198.51.100.17
+
+	ip route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+	ip route add 2001:db8:3::/64 vrf v$h2 nexthop via 2001:db8:2::1
+
+	tc qdisc add dev $h2 ingress
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 ingress
+
+	ip route del 2001:db8:3::/64 vrf v$h2
+	ip route del 2001:db8:1::/64 vrf v$h2
+
+	ip route del 198.51.100.32/28 vrf v$h2
+	ip route del 198.51.100.0/28 vrf v$h2
+
+	simple_if_fini $h2 198.51.100.18/28 2001:db8:2::2/64
+}
+
+h3_create()
+{
+	simple_if_init $h3 198.51.100.34/28 2001:db8:3::2/64
+
+	ip route add 198.51.100.0/28 vrf v$h3 nexthop via 198.51.100.33
+	ip route add 198.51.100.16/28 vrf v$h3 nexthop via 198.51.100.33
+
+	ip route add 2001:db8:1::/64 vrf v$h3 nexthop via 2001:db8:3::1
+	ip route add 2001:db8:2::/64 vrf v$h3 nexthop via 2001:db8:3::1
+
+	tc qdisc add dev $h3 ingress
+}
+
+h3_destroy()
+{
+	tc qdisc del dev $h3 ingress
+
+	ip route del 2001:db8:2::/64 vrf v$h3
+	ip route del 2001:db8:1::/64 vrf v$h3
+
+	ip route del 198.51.100.16/28 vrf v$h3
+	ip route del 198.51.100.0/28 vrf v$h3
+
+	simple_if_fini $h3 198.51.100.34/28 2001:db8:3::2/64
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	ip address add 198.51.100.1/28 dev $rp1
+	ip address add 198.51.100.17/28 dev $rp2
+	ip address add 198.51.100.33/28 dev $rp3
+
+	ip address add 2001:db8:1::1/64 dev $rp1
+	ip address add 2001:db8:2::1/64 dev $rp2
+	ip address add 2001:db8:3::1/64 dev $rp3
+
+	tc qdisc add dev $rp3 ingress
+}
+
+router_destroy()
+{
+	tc qdisc del dev $rp3 ingress
+
+	ip address del 2001:db8:3::1/64 dev $rp3
+	ip address del 2001:db8:2::1/64 dev $rp2
+	ip address del 2001:db8:1::1/64 dev $rp1
+
+	ip address del 198.51.100.33/28 dev $rp3
+	ip address del 198.51.100.17/28 dev $rp2
+	ip address del 198.51.100.1/28 dev $rp1
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+start_mcd()
+{
+	SMCROUTEDIR="$(mktemp -d)"
+
+	for ((i = 1; i <= $NUM_NETIFS; ++i)); do
+		echo "phyint ${NETIFS[p$i]} enable" >> \
+			$SMCROUTEDIR/$table_name.conf
+	done
+
+	$MCD -N -I $table_name -f $SMCROUTEDIR/$table_name.conf \
+		-P $SMCROUTEDIR/$table_name.pid
+}
+
+kill_mcd()
+{
+	pkill $MCD
+	rm -rf $SMCROUTEDIR
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	start_mcd
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	kill_mcd
+}
+
+create_mcast_sg()
+{
+	local if_name=$1; shift
+	local s_addr=$1; shift
+	local mcast=$1; shift
+	local dest_ifs=${@}
+
+	$MC_CLI -I $table_name add $if_name $s_addr $mcast $dest_ifs
+}
+
+delete_mcast_sg()
+{
+	local if_name=$1; shift
+	local s_addr=$1; shift
+	local mcast=$1; shift
+	local dest_ifs=${@}
+
+        $MC_CLI -I $table_name remove $if_name $s_addr $mcast $dest_ifs
+}
+
+mcast_v4()
+{
+	# Add two interfaces to an MC group, send a packet to the MC group and
+	# verify packets are received on both. Then delete the route and verify
+	# packets are no longer received.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 122 flower \
+		dst_ip 225.1.2.3 action drop
+	tc filter add dev $h3 ingress protocol ip pref 1 handle 133 flower \
+		dst_ip 225.1.2.3 action drop
+
+	create_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3
+
+	# Send frames with the corresponding L2 destination address.
+	$MZ $h1 -c 5 -p 128 -t udp -a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h2 ingress" 122 5
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 133 5
+	check_err $? "Multicast not received on second host"
+
+	delete_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3
+
+	$MZ $h1 -c 5 -p 128 -t udp -a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h2 ingress" 122 5
+	check_err $? "Multicast received on host although deleted"
+	tc_check_packets "dev $h3 ingress" 133 5
+	check_err $? "Multicast received on second host although deleted"
+
+	tc filter del dev $h3 ingress protocol ip pref 1 handle 133 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 122 flower
+
+	log_test "mcast IPv4"
+}
+
+mcast_v6()
+{
+	# Add two interfaces to an MC group, send a packet to the MC group and
+	# verify packets are received on both. Then delete the route and verify
+	# packets are no longer received.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 122 flower \
+		dst_ip ff0e::3 action drop
+	tc filter add dev $h3 ingress protocol ipv6 pref 1 handle 133 flower \
+		dst_ip ff0e::3 action drop
+
+	create_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3
+
+	# Send frames with the corresponding L2 destination address.
+	$MZ $h1 -6 -c 5 -p 128 -t udp -a 00:11:22:33:44:55 \
+		-b 33:33:00:00:00:03 -A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h2 ingress" 122 5
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 133 5
+	check_err $? "Multicast not received on second host"
+
+	delete_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3
+
+	$MZ $h1 -6 -c 5 -p 128 -t udp -a 00:11:22:33:44:55 \
+		-b 33:33:00:00:00:03 -A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h2 ingress" 122 5
+	check_err $? "Multicast received on first host although deleted"
+	tc_check_packets "dev $h3 ingress" 133 5
+	check_err $? "Multicast received on second host although deleted"
+
+	tc filter del dev $h3 ingress protocol ipv6 pref 1 handle 133 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 122 flower
+
+	log_test "mcast IPv6"
+}
+
+rpf_v4()
+{
+	# Add a multicast route from first router port to the other two. Send
+	# matching packets and test that both hosts receive them. Then, send
+	# the same packets via the third router port and test that they do not
+	# reach any host due to RPF check. A filter with 'skip_hw' is added to
+	# test that devices capable of multicast routing offload trap those
+	# packets. The filter is essentialy a NOP in other scenarios.
+
+	RET=0
+
+	tc filter add dev $h1 ingress protocol ip pref 1 handle 1 flower \
+		dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1 flower \
+		dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h3 ingress protocol ip pref 1 handle 1 flower \
+		dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $rp3 ingress protocol ip pref 1 handle 1 flower \
+		skip_hw dst_ip 225.1.2.3 ip_proto udp dst_port 12345 action pass
+
+	create_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3
+
+	$MZ $h1 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h2 ingress" 1 5
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 1 5
+	check_err $? "Multicast not received on second host"
+
+	$MZ $h3 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 01:00:5e:01:02:03 \
+		-A 198.51.100.2 -B 225.1.2.3 -q
+
+	tc_check_packets "dev $h1 ingress" 1 0
+	check_err $? "Multicast received on first host when should not"
+	tc_check_packets "dev $h2 ingress" 1 5
+	check_err $? "Multicast received on second host when should not"
+	tc_check_packets "dev $rp3 ingress" 1 5
+	check_err $? "Packets not trapped due to RPF check"
+
+	delete_mcast_sg $rp1 198.51.100.2 225.1.2.3 $rp2 $rp3
+
+	tc filter del dev $rp3 ingress protocol ip pref 1 handle 1 flower
+	tc filter del dev $h3 ingress protocol ip pref 1 handle 1 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1 flower
+	tc filter del dev $h1 ingress protocol ip pref 1 handle 1 flower
+
+	log_test "RPF IPv4"
+}
+
+rpf_v6()
+{
+	RET=0
+
+	tc filter add dev $h1 ingress protocol ipv6 pref 1 handle 1 flower \
+		dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 1 flower \
+		dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $h3 ingress protocol ipv6 pref 1 handle 1 flower \
+		dst_ip ff0e::3 ip_proto udp dst_port 12345 action drop
+	tc filter add dev $rp3 ingress protocol ipv6 pref 1 handle 1 flower \
+		skip_hw dst_ip ff0e::3 ip_proto udp dst_port 12345 action pass
+
+	create_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3
+
+	$MZ $h1 -6 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 33:33:00:00:00:03 \
+		-A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h2 ingress" 1 5
+	check_err $? "Multicast not received on first host"
+	tc_check_packets "dev $h3 ingress" 1 5
+	check_err $? "Multicast not received on second host"
+
+	$MZ $h3 -6 -c 5 -p 128 -t udp "ttl=10,sp=54321,dp=12345" \
+		-a 00:11:22:33:44:55 -b 33:33:00:00:00:03 \
+		-A 2001:db8:1::2 -B ff0e::3 -q
+
+	tc_check_packets "dev $h1 ingress" 1 0
+	check_err $? "Multicast received on first host when should not"
+	tc_check_packets "dev $h2 ingress" 1 5
+	check_err $? "Multicast received on second host when should not"
+	tc_check_packets "dev $rp3 ingress" 1 5
+	check_err $? "Packets not trapped due to RPF check"
+
+	delete_mcast_sg $rp1 2001:db8:1::2 ff0e::3 $rp2 $rp3
+
+	tc filter del dev $rp3 ingress protocol ipv6 pref 1 handle 1 flower
+	tc filter del dev $h3 ingress protocol ipv6 pref 1 handle 1 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 1 flower
+	tc filter del dev $h1 ingress protocol ipv6 pref 1 handle 1 flower
+
+	log_test "RPF IPv6"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh
new file mode 100755
index 000000000..464821c58
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_multipath.sh
@@ -0,0 +1,342 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 multipath_test"
+NUM_NETIFS=8
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+	ip address add 2001:db8:1::2/64 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 2001:db8:1::2/64 dev $h1
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+	ip address add 2001:db8:2::2/64 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 2001:db8:2::2/64 dev $h2
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router1_create()
+{
+	vrf_create "vrf-r1"
+	ip link set dev $rp11 master vrf-r1
+	ip link set dev $rp12 master vrf-r1
+	ip link set dev $rp13 master vrf-r1
+
+	ip link set dev vrf-r1 up
+	ip link set dev $rp11 up
+	ip link set dev $rp12 up
+	ip link set dev $rp13 up
+
+	ip address add 192.0.2.1/24 dev $rp11
+	ip address add 2001:db8:1::1/64 dev $rp11
+
+	ip address add 169.254.2.12/24 dev $rp12
+	ip address add fe80:2::12/64 dev $rp12
+
+	ip address add 169.254.3.13/24 dev $rp13
+	ip address add fe80:3::13/64 dev $rp13
+
+	ip route add 198.51.100.0/24 vrf vrf-r1 \
+		nexthop via 169.254.2.22 dev $rp12 \
+		nexthop via 169.254.3.23 dev $rp13
+	ip route add 2001:db8:2::/64 vrf vrf-r1 \
+		nexthop via fe80:2::22 dev $rp12 \
+		nexthop via fe80:3::23 dev $rp13
+}
+
+router1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-r1
+	ip route del 198.51.100.0/24 vrf vrf-r1
+
+	ip address del fe80:3::13/64 dev $rp13
+	ip address del 169.254.3.13/24 dev $rp13
+
+	ip address del fe80:2::12/64 dev $rp12
+	ip address del 169.254.2.12/24 dev $rp12
+
+	ip address del 2001:db8:1::1/64 dev $rp11
+	ip address del 192.0.2.1/24 dev $rp11
+
+	ip link set dev $rp13 down
+	ip link set dev $rp12 down
+	ip link set dev $rp11 down
+
+	vrf_destroy "vrf-r1"
+}
+
+router2_create()
+{
+	vrf_create "vrf-r2"
+	ip link set dev $rp21 master vrf-r2
+	ip link set dev $rp22 master vrf-r2
+	ip link set dev $rp23 master vrf-r2
+
+	ip link set dev vrf-r2 up
+	ip link set dev $rp21 up
+	ip link set dev $rp22 up
+	ip link set dev $rp23 up
+
+	ip address add 198.51.100.1/24 dev $rp21
+	ip address add 2001:db8:2::1/64 dev $rp21
+
+	ip address add 169.254.2.22/24 dev $rp22
+	ip address add fe80:2::22/64 dev $rp22
+
+	ip address add 169.254.3.23/24 dev $rp23
+	ip address add fe80:3::23/64 dev $rp23
+
+	ip route add 192.0.2.0/24 vrf vrf-r2 \
+		nexthop via 169.254.2.12 dev $rp22 \
+		nexthop via 169.254.3.13 dev $rp23
+	ip route add 2001:db8:1::/64 vrf vrf-r2 \
+		nexthop via fe80:2::12 dev $rp22 \
+		nexthop via fe80:3::13 dev $rp23
+}
+
+router2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-r2
+	ip route del 192.0.2.0/24 vrf vrf-r2
+
+	ip address del fe80:3::23/64 dev $rp23
+	ip address del 169.254.3.23/24 dev $rp23
+
+	ip address del fe80:2::22/64 dev $rp22
+	ip address del 169.254.2.22/24 dev $rp22
+
+	ip address del 2001:db8:2::1/64 dev $rp21
+	ip address del 198.51.100.1/24 dev $rp21
+
+	ip link set dev $rp23 down
+	ip link set dev $rp22 down
+	ip link set dev $rp21 down
+
+	vrf_destroy "vrf-r2"
+}
+
+multipath4_test()
+{
+       local desc="$1"
+       local weight_rp12=$2
+       local weight_rp13=$3
+       local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+       local packets_rp12 packets_rp13
+
+       # Transmit multiple flows from h1 to h2 and make sure they are
+       # distributed between both multipath links (rp12 and rp13)
+       # according to the configured weights.
+       sysctl_set net.ipv4.fib_multipath_hash_policy 1
+       ip route replace 198.51.100.0/24 vrf vrf-r1 \
+               nexthop via 169.254.2.22 dev $rp12 weight $weight_rp12 \
+               nexthop via 169.254.3.23 dev $rp13 weight $weight_rp13
+
+       t0_rp12=$(link_stats_tx_packets_get $rp12)
+       t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+       ip vrf exec vrf-h1 $MZ $h1 -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+       t1_rp12=$(link_stats_tx_packets_get $rp12)
+       t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+       let "packets_rp12 = $t1_rp12 - $t0_rp12"
+       let "packets_rp13 = $t1_rp13 - $t0_rp13"
+       multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+       # Restore settings.
+       ip route replace 198.51.100.0/24 vrf vrf-r1 \
+               nexthop via 169.254.2.22 dev $rp12 \
+               nexthop via 169.254.3.23 dev $rp13
+       sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+multipath6_l4_test()
+{
+       local desc="$1"
+       local weight_rp12=$2
+       local weight_rp13=$3
+       local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+       local packets_rp12 packets_rp13
+
+       # Transmit multiple flows from h1 to h2 and make sure they are
+       # distributed between both multipath links (rp12 and rp13)
+       # according to the configured weights.
+       sysctl_set net.ipv6.fib_multipath_hash_policy 1
+
+       ip route replace 2001:db8:2::/64 vrf vrf-r1 \
+	       nexthop via fe80:2::22 dev $rp12 weight $weight_rp12 \
+	       nexthop via fe80:3::23 dev $rp13 weight $weight_rp13
+
+       t0_rp12=$(link_stats_tx_packets_get $rp12)
+       t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+       $MZ $h1 -6 -q -p 64 -A 2001:db8:1::2 -B 2001:db8:2::2 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+       t1_rp12=$(link_stats_tx_packets_get $rp12)
+       t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+       let "packets_rp12 = $t1_rp12 - $t0_rp12"
+       let "packets_rp13 = $t1_rp13 - $t0_rp13"
+       multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+       ip route replace 2001:db8:2::/64 vrf vrf-r1 \
+	       nexthop via fe80:2::22 dev $rp12 \
+	       nexthop via fe80:3::23 dev $rp13
+
+       sysctl_restore net.ipv6.fib_multipath_hash_policy
+}
+
+multipath6_test()
+{
+       local desc="$1"
+       local weight_rp12=$2
+       local weight_rp13=$3
+       local t0_rp12 t0_rp13 t1_rp12 t1_rp13
+       local packets_rp12 packets_rp13
+
+       ip route replace 2001:db8:2::/64 vrf vrf-r1 \
+	       nexthop via fe80:2::22 dev $rp12 weight $weight_rp12 \
+	       nexthop via fe80:3::23 dev $rp13 weight $weight_rp13
+
+       t0_rp12=$(link_stats_tx_packets_get $rp12)
+       t0_rp13=$(link_stats_tx_packets_get $rp13)
+
+       # Generate 16384 echo requests, each with a random flow label.
+       for _ in $(seq 1 16384); do
+	       ip vrf exec vrf-h1 $PING6 2001:db8:2::2 -F 0 -c 1 -q &> /dev/null
+       done
+
+       t1_rp12=$(link_stats_tx_packets_get $rp12)
+       t1_rp13=$(link_stats_tx_packets_get $rp13)
+
+       let "packets_rp12 = $t1_rp12 - $t0_rp12"
+       let "packets_rp13 = $t1_rp13 - $t0_rp13"
+       multipath_eval "$desc" $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13
+
+       ip route replace 2001:db8:2::/64 vrf vrf-r1 \
+	       nexthop via fe80:2::22 dev $rp12 \
+	       nexthop via fe80:3::23 dev $rp13
+}
+
+multipath_test()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+
+	log_info "Running IPv6 multipath tests"
+	multipath6_test "ECMP" 1 1
+	multipath6_test "Weighted MP 2:1" 2 1
+	multipath6_test "Weighted MP 11:45" 11 45
+
+	log_info "Running IPv6 L4 hash multipath tests"
+	multipath6_l4_test "ECMP" 1 1
+	multipath6_l4_test "Weighted MP 2:1" 2 1
+	multipath6_l4_test "Weighted MP 11:45" 11 45
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp11=${NETIFS[p2]}
+
+	rp12=${NETIFS[p3]}
+	rp22=${NETIFS[p4]}
+
+	rp13=${NETIFS[p5]}
+	rp23=${NETIFS[p6]}
+
+	rp21=${NETIFS[p7]}
+	h2=${NETIFS[p8]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router1_create
+	router2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router2_destroy
+	router1_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_vid_1.sh b/tools/testing/selftests/net/forwarding/router_vid_1.sh
new file mode 100755
index 000000000..a7306c7ac
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_vid_1.sh
@@ -0,0 +1,135 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev vrf-h1 up
+
+	ip link set dev $h1 up
+	vlan_create $h1 1 vrf-h1 192.0.2.2/24 2001:db8:1::2/64
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1
+}
+
+h1_destroy()
+{
+	ip route del 2001:db8:2::/64 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	vlan_destroy $h1 1
+	ip link set dev $h1 down
+
+	ip link set dev vrf-h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev vrf-h2 up
+
+	ip link set dev $h2 up
+	vlan_create $h2 1 vrf-h2 198.51.100.2/24 2001:db8:2::2/64
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip route del 2001:db8:1::/64 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	vlan_destroy $h2 1
+	ip link set dev $h2 down
+
+	ip link set dev vrf-h2 down
+	vrf_destroy "vrf-h2"
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link add link $rp1 name $rp1.1 up type vlan id 1
+
+	ip address add 192.0.2.1/24 dev $rp1.1
+	ip address add 2001:db8:1::1/64 dev $rp1.1
+
+	ip link set dev $rp2 up
+	ip link add link $rp2 name $rp2.1 up type vlan id 1
+
+	ip address add 198.51.100.1/24 dev $rp2.1
+	ip address add 2001:db8:2::1/64 dev $rp2.1
+}
+
+router_destroy()
+{
+	ip address del 2001:db8:2::1/64 dev $rp2.1
+	ip address del 198.51.100.1/24 dev $rp2.1
+
+	ip link del dev $rp2.1
+	ip link set dev $rp2 down
+
+	ip address del 2001:db8:1::1/64 dev $rp1.1
+	ip address del 192.0.2.1/24 dev $rp1.1
+
+	ip link del dev $rp1.1
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1.1 198.51.100.2
+}
+
+ping_ipv6()
+{
+	ping6_test $h1.1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/sch_ets.sh b/tools/testing/selftests/net/forwarding/sch_ets.sh
new file mode 100755
index 000000000..e60c8b481
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_ets.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A driver for the ETS selftest that implements testing in slowpath.
+lib_dir=.
+source sch_ets_core.sh
+
+ALL_TESTS="
+	ping_ipv4
+	priomap_mode
+	ets_test_strict
+	ets_test_mixed
+	ets_test_dwrr
+	classifier_mode
+	ets_test_strict
+	ets_test_mixed
+	ets_test_dwrr
+"
+
+switch_create()
+{
+	ets_switch_create
+
+	# Create a bottleneck so that the DWRR process can kick in.
+	tc qdisc add dev $swp2 root handle 1: tbf \
+	   rate 1Gbit burst 1Mbit latency 100ms
+	PARENT="parent 1:"
+}
+
+switch_destroy()
+{
+	ets_switch_destroy
+	tc qdisc del dev $swp2 root
+}
+
+# Callback from sch_ets_tests.sh
+collect_stats()
+{
+	local -a streams=("$@")
+	local stream
+
+	for stream in ${streams[@]}; do
+		qdisc_parent_stats_get $swp2 10:$((stream + 1)) .bytes
+	done
+}
+
+ets_run
diff --git a/tools/testing/selftests/net/forwarding/sch_ets_core.sh b/tools/testing/selftests/net/forwarding/sch_ets_core.sh
new file mode 100644
index 000000000..f906fcc66
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_ets_core.sh
@@ -0,0 +1,300 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This is a template for ETS Qdisc test.
+#
+# This test sends from H1 several traffic streams with 802.1p-tagged packets.
+# The tags are used at $swp1 to prioritize the traffic. Each stream is then
+# queued at a different ETS band according to the assigned priority. After
+# runnig for a while, counters at H2 are consulted to determine whether the
+# traffic scheduling was according to the ETS configuration.
+#
+# This template is supposed to be embedded by a test driver, which implements
+# statistics collection, any HW-specific stuff, and prominently configures the
+# system to assure that there is overcommitment at $swp2. That is necessary so
+# that the ETS traffic selection algorithm kicks in and has to schedule some
+# traffic at the expense of other.
+#
+# A driver for veth-based testing is in sch_ets.sh, an example of a driver for
+# an offloaded data path is in selftests/drivers/net/mlxsw/sch_ets.sh.
+#
+# +---------------------------------------------------------------------+
+# | H1                                                                  |
+# |     + $h1.10              + $h1.11              + $h1.12            |
+# |     | 192.0.2.1/28        | 192.0.2.17/28       | 192.0.2.33/28     |
+# |     | egress-qos-map      | egress-qos-map      | egress-qos-map    |
+# |     |  0:0                |  0:1                |  0:2              |
+# |     \____________________ | ____________________/                   |
+# |                          \|/                                        |
+# |                           + $h1                                     |
+# +---------------------------|-----------------------------------------+
+#                             |
+# +---------------------------|-----------------------------------------+
+# | SW                        + $swp1                                   |
+# |                           | >1Gbps                                  |
+# |      ____________________/|\____________________                    |
+# |     /                     |                     \                   |
+# |  +--|----------------+ +--|----------------+ +--|----------------+  |
+# |  |  + $swp1.10       | |  + $swp1.11       | |  + $swp1.12       |  |
+# |  |    ingress-qos-map| |    ingress-qos-map| |    ingress-qos-map|  |
+# |  |     0:0 1:1 2:2   | |     0:0 1:1 2:2   | |     0:0 1:1 2:2   |  |
+# |  |                   | |                   | |                   |  |
+# |  |    BR10           | |    BR11           | |    BR12           |  |
+# |  |                   | |                   | |                   |  |
+# |  |  + $swp2.10       | |  + $swp2.11       | |  + $swp2.12       |  |
+# |  +--|----------------+ +--|----------------+ +--|----------------+  |
+# |     \____________________ | ____________________/                   |
+# |                          \|/                                        |
+# |                           + $swp2                                   |
+# |                           | 1Gbps (ethtool or HTB qdisc)            |
+# |                           | qdisc ets quanta $W0 $W1 $W2            |
+# |                           |           priomap 0 1 2                 |
+# +---------------------------|-----------------------------------------+
+#                             |
+# +---------------------------|-----------------------------------------+
+# | H2                        + $h2                                     |
+# |      ____________________/|\____________________                    |
+# |     /                     |                     \                   |
+# |     + $h2.10              + $h2.11              + $h2.12            |
+# |       192.0.2.2/28          192.0.2.18/28         192.0.2.34/28     |
+# +---------------------------------------------------------------------+
+
+NUM_NETIFS=4
+CHECK_TC=yes
+source $lib_dir/lib.sh
+source $lib_dir/sch_ets_tests.sh
+
+PARENT=root
+QDISC_DEV=
+
+sip()
+{
+	echo 192.0.2.$((16 * $1 + 1))
+}
+
+dip()
+{
+	echo 192.0.2.$((16 * $1 + 2))
+}
+
+# Callback from sch_ets_tests.sh
+ets_start_traffic()
+{
+	local dst_mac=$(mac_get $h2)
+	local i=$1; shift
+
+	start_traffic $h1.1$i $(sip $i) $(dip $i) $dst_mac
+}
+
+ETS_CHANGE_QDISC=
+
+priomap_mode()
+{
+	echo "Running in priomap mode"
+	ets_delete_qdisc
+	ETS_CHANGE_QDISC=ets_change_qdisc_priomap
+}
+
+classifier_mode()
+{
+	echo "Running in classifier mode"
+	ets_delete_qdisc
+	ETS_CHANGE_QDISC=ets_change_qdisc_classifier
+}
+
+ets_change_qdisc_priomap()
+{
+	local dev=$1; shift
+	local nstrict=$1; shift
+	local priomap=$1; shift
+	local quanta=("${@}")
+
+	local op=$(if [[ -n $QDISC_DEV ]]; then echo change; else echo add; fi)
+
+	tc qdisc $op dev $dev $PARENT handle 10: ets			       \
+		$(if ((nstrict)); then echo strict $nstrict; fi)	       \
+		$(if ((${#quanta[@]})); then echo quanta ${quanta[@]}; fi)     \
+		priomap $priomap
+	QDISC_DEV=$dev
+}
+
+ets_change_qdisc_classifier()
+{
+	local dev=$1; shift
+	local nstrict=$1; shift
+	local priomap=$1; shift
+	local quanta=("${@}")
+
+	local op=$(if [[ -n $QDISC_DEV ]]; then echo change; else echo add; fi)
+
+	tc qdisc $op dev $dev $PARENT handle 10: ets			       \
+		$(if ((nstrict)); then echo strict $nstrict; fi)	       \
+		$(if ((${#quanta[@]})); then echo quanta ${quanta[@]}; fi)
+
+	if [[ $op == add ]]; then
+		local prio=0
+		local band
+
+		for band in $priomap; do
+			tc filter add dev $dev parent 10: basic \
+				match "meta(priority eq $prio)" \
+				flowid 10:$((band + 1))
+			((prio++))
+		done
+	fi
+	QDISC_DEV=$dev
+}
+
+# Callback from sch_ets_tests.sh
+ets_change_qdisc()
+{
+	if [[ -z "$ETS_CHANGE_QDISC" ]]; then
+		exit 1
+	fi
+	$ETS_CHANGE_QDISC "$@"
+}
+
+ets_delete_qdisc()
+{
+	if [[ -n $QDISC_DEV ]]; then
+		tc qdisc del dev $QDISC_DEV $PARENT
+		QDISC_DEV=
+	fi
+}
+
+h1_create()
+{
+	local i;
+
+	simple_if_init $h1
+	mtu_set $h1 9900
+	for i in {0..2}; do
+		vlan_create $h1 1$i v$h1 $(sip $i)/28
+		ip link set dev $h1.1$i type vlan egress 0:$i
+	done
+}
+
+h1_destroy()
+{
+	local i
+
+	for i in {0..2}; do
+		vlan_destroy $h1 1$i
+	done
+	mtu_restore $h1
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	local i
+
+	simple_if_init $h2
+	mtu_set $h2 9900
+	for i in {0..2}; do
+		vlan_create $h2 1$i v$h2 $(dip $i)/28
+	done
+}
+
+h2_destroy()
+{
+	local i
+
+	for i in {0..2}; do
+		vlan_destroy $h2 1$i
+	done
+	mtu_restore $h2
+	simple_if_fini $h2
+}
+
+ets_switch_create()
+{
+	local i
+
+	ip link set dev $swp1 up
+	mtu_set $swp1 9900
+
+	ip link set dev $swp2 up
+	mtu_set $swp2 9900
+
+	for i in {0..2}; do
+		vlan_create $swp1 1$i
+		ip link set dev $swp1.1$i type vlan ingress 0:0 1:1 2:2
+
+		vlan_create $swp2 1$i
+
+		ip link add dev br1$i type bridge
+		ip link set dev $swp1.1$i master br1$i
+		ip link set dev $swp2.1$i master br1$i
+
+		ip link set dev br1$i up
+		ip link set dev $swp1.1$i up
+		ip link set dev $swp2.1$i up
+	done
+}
+
+ets_switch_destroy()
+{
+	local i
+
+	ets_delete_qdisc
+
+	for i in {0..2}; do
+		ip link del dev br1$i
+		vlan_destroy $swp2 1$i
+		vlan_destroy $swp1 1$i
+	done
+
+	mtu_restore $swp2
+	ip link set dev $swp2 down
+
+	mtu_restore $swp1
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	put=$swp2
+	hut=$h2
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1.10 $(dip 0) " vlan 10"
+	ping_test $h1.11 $(dip 1) " vlan 11"
+	ping_test $h1.12 $(dip 2) " vlan 12"
+}
+
+ets_run()
+{
+	trap cleanup EXIT
+
+	setup_prepare
+	setup_wait
+
+	tests_run
+
+	exit $EXIT_STATUS
+}
diff --git a/tools/testing/selftests/net/forwarding/sch_ets_tests.sh b/tools/testing/selftests/net/forwarding/sch_ets_tests.sh
new file mode 100644
index 000000000..cdf689e99
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_ets_tests.sh
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Global interface:
+#  $put -- port under test (e.g. $swp2)
+#  collect_stats($streams...) -- A function to get stats for individual streams
+#  ets_start_traffic($band) -- Start traffic for this band
+#  ets_change_qdisc($op, $dev, $nstrict, $quanta...) -- Add or change qdisc
+
+# WS describes the Qdisc configuration. It has one value per band (so the
+# number of array elements indicates the number of bands). If the value is
+# 0, it is a strict band, otherwise the it's a DRR band and the value is
+# that band's quantum.
+declare -a WS
+
+qdisc_describe()
+{
+	local nbands=${#WS[@]}
+	local nstrict=0
+	local i
+
+	for ((i = 0; i < nbands; i++)); do
+		if ((!${WS[$i]})); then
+			: $((nstrict++))
+		fi
+	done
+
+	echo -n "ets bands $nbands"
+	if ((nstrict)); then
+		echo -n " strict $nstrict"
+	fi
+	if ((nstrict < nbands)); then
+		echo -n " quanta"
+		for ((i = nstrict; i < nbands; i++)); do
+			echo -n " ${WS[$i]}"
+		done
+	fi
+}
+
+__strict_eval()
+{
+	local desc=$1; shift
+	local d=$1; shift
+	local total=$1; shift
+	local above=$1; shift
+
+	RET=0
+
+	if ((! total)); then
+		check_err 1 "No traffic observed"
+		log_test "$desc"
+		return
+	fi
+
+	local ratio=$(echo "scale=2; 100 * $d / $total" | bc -l)
+	if ((above)); then
+		test $(echo "$ratio > 95.0" | bc -l) -eq 1
+		check_err $? "Not enough traffic"
+		log_test "$desc"
+		log_info "Expected ratio >95% Measured ratio $ratio"
+	else
+		test $(echo "$ratio < 5" | bc -l) -eq 1
+		check_err $? "Too much traffic"
+		log_test "$desc"
+		log_info "Expected ratio <5% Measured ratio $ratio"
+	fi
+}
+
+strict_eval()
+{
+	__strict_eval "$@" 1
+}
+
+notraf_eval()
+{
+	__strict_eval "$@" 0
+}
+
+__ets_dwrr_test()
+{
+	local -a streams=("$@")
+
+	local low_stream=${streams[0]}
+	local seen_strict=0
+	local -a t0 t1 d
+	local stream
+	local total
+	local i
+
+	echo "Testing $(qdisc_describe), streams ${streams[@]}"
+
+	for stream in ${streams[@]}; do
+		ets_start_traffic $stream
+	done
+
+	sleep 10
+
+	t0=($(collect_stats "${streams[@]}"))
+
+	sleep 10
+
+	t1=($(collect_stats "${streams[@]}"))
+	d=($(for ((i = 0; i < ${#streams[@]}; i++)); do
+		 echo $((${t1[$i]} - ${t0[$i]}))
+	     done))
+	total=$(echo ${d[@]} | sed 's/ /+/g' | bc)
+
+	for ((i = 0; i < ${#streams[@]}; i++)); do
+		local stream=${streams[$i]}
+		if ((seen_strict)); then
+			notraf_eval "band $stream" ${d[$i]} $total
+		elif ((${WS[$stream]} == 0)); then
+			strict_eval "band $stream" ${d[$i]} $total
+			seen_strict=1
+		elif ((stream == low_stream)); then
+			# Low stream is used as DWRR evaluation reference.
+			continue
+		else
+			multipath_eval "bands $low_stream:$stream" \
+				       ${WS[$low_stream]} ${WS[$stream]} \
+				       ${d[0]} ${d[$i]}
+		fi
+	done
+
+	for stream in ${streams[@]}; do
+		stop_traffic
+	done
+}
+
+ets_dwrr_test_012()
+{
+	__ets_dwrr_test 0 1 2
+}
+
+ets_dwrr_test_01()
+{
+	__ets_dwrr_test 0 1
+}
+
+ets_dwrr_test_12()
+{
+	__ets_dwrr_test 1 2
+}
+
+ets_qdisc_setup()
+{
+	local dev=$1; shift
+	local nstrict=$1; shift
+	local -a quanta=("$@")
+
+	local ndwrr=${#quanta[@]}
+	local nbands=$((nstrict + ndwrr))
+	local nstreams=$(if ((nbands > 3)); then echo 3; else echo $nbands; fi)
+	local priomap=$(seq 0 $((nstreams - 1)))
+	local i
+
+	WS=($(
+		for ((i = 0; i < nstrict; i++)); do
+			echo 0
+		done
+		for ((i = 0; i < ndwrr; i++)); do
+			echo ${quanta[$i]}
+		done
+	))
+
+	ets_change_qdisc $dev $nstrict "$priomap" ${quanta[@]}
+}
+
+ets_set_dwrr_uniform()
+{
+	ets_qdisc_setup $put 0 3300 3300 3300
+}
+
+ets_set_dwrr_varying()
+{
+	ets_qdisc_setup $put 0 5000 3500 1500
+}
+
+ets_set_strict()
+{
+	ets_qdisc_setup $put 3
+}
+
+ets_set_mixed()
+{
+	ets_qdisc_setup $put 1 5000 2500 1500
+}
+
+ets_change_quantum()
+{
+	tc class change dev $put classid 10:2 ets quantum 8000
+	WS[1]=8000
+}
+
+ets_set_dwrr_two_bands()
+{
+	ets_qdisc_setup $put 0 5000 2500
+}
+
+ets_test_strict()
+{
+	ets_set_strict
+	ets_dwrr_test_01
+	ets_dwrr_test_12
+}
+
+ets_test_mixed()
+{
+	ets_set_mixed
+	ets_dwrr_test_01
+	ets_dwrr_test_12
+}
+
+ets_test_dwrr()
+{
+	ets_set_dwrr_uniform
+	ets_dwrr_test_012
+	ets_set_dwrr_varying
+	ets_dwrr_test_012
+	ets_change_quantum
+	ets_dwrr_test_012
+	ets_set_dwrr_two_bands
+	ets_dwrr_test_01
+}
diff --git a/tools/testing/selftests/net/forwarding/sch_red.sh b/tools/testing/selftests/net/forwarding/sch_red.sh
new file mode 100755
index 000000000..81f31179a
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_red.sh
@@ -0,0 +1,493 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends one stream of traffic from H1 through a TBF shaper, to a RED
+# within TBF shaper on $swp3. The two shapers have the same configuration, and
+# thus the resulting stream should fill all available bandwidth on the latter
+# shaper. A second stream is sent from H2 also via $swp3, and used to inject
+# additional traffic. Since all available bandwidth is taken, this traffic has
+# to go to backlog.
+#
+# +--------------------------+                     +--------------------------+
+# | H1                       |                     | H2                       |
+# |     + $h1                |                     |     + $h2                |
+# |     | 192.0.2.1/28       |                     |     | 192.0.2.2/28       |
+# |     | TBF 10Mbps         |                     |     |                    |
+# +-----|--------------------+                     +-----|--------------------+
+#       |                                                |
+# +-----|------------------------------------------------|--------------------+
+# | SW  |                                                |                    |
+# |  +--|------------------------------------------------|----------------+   |
+# |  |  + $swp1                                          + $swp2          |   |
+# |  |                               BR                                   |   |
+# |  |                                                                    |   |
+# |  |                                + $swp3                             |   |
+# |  |                                | TBF 10Mbps / RED                  |   |
+# |  +--------------------------------|-----------------------------------+   |
+# |                                   |                                       |
+# +-----------------------------------|---------------------------------------+
+#                                     |
+#                               +-----|--------------------+
+#			        | H3  |                    |
+#			        |     + $h1                |
+#			        |       192.0.2.3/28       |
+#			        |                          |
+#			        +--------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ecn_test
+	ecn_nodrop_test
+	red_test
+	red_qevent_test
+	ecn_qevent_test
+"
+
+NUM_NETIFS=6
+CHECK_TC="yes"
+source lib.sh
+
+BACKLOG=30000
+PKTSZ=1400
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+	mtu_set $h1 10000
+	tc qdisc replace dev $h1 root handle 1: tbf \
+	   rate 10Mbit burst 10K limit 1M
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 root
+	mtu_restore $h1
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+	mtu_set $h2 10000
+}
+
+h2_destroy()
+{
+	mtu_restore $h2
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.3/28
+	mtu_set $h3 10000
+}
+
+h3_destroy()
+{
+	mtu_restore $h3
+	simple_if_fini $h3 192.0.2.3/28
+}
+
+switch_create()
+{
+	ip link add dev br up type bridge
+	ip link set dev $swp1 up master br
+	ip link set dev $swp2 up master br
+	ip link set dev $swp3 up master br
+
+	mtu_set $swp1 10000
+	mtu_set $swp2 10000
+	mtu_set $swp3 10000
+
+	tc qdisc replace dev $swp3 root handle 1: tbf \
+	   rate 10Mbit burst 10K limit 1M
+	ip link add name _drop_test up type dummy
+}
+
+switch_destroy()
+{
+	ip link del dev _drop_test
+	tc qdisc del dev $swp3 root
+
+	mtu_restore $h3
+	mtu_restore $h2
+	mtu_restore $h1
+
+	ip link set dev $swp3 down nomaster
+	ip link set dev $swp2 down nomaster
+	ip link set dev $swp1 down nomaster
+	ip link del dev br
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	h2=${NETIFS[p3]}
+	swp2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	h3_mac=$(mac_get $h3)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.3 " from host 1"
+	ping_test $h2 192.0.2.3 " from host 2"
+}
+
+get_qdisc_backlog()
+{
+	qdisc_stats_get $swp3 11: .backlog
+}
+
+get_nmarked()
+{
+	qdisc_stats_get $swp3 11: .marked
+}
+
+get_qdisc_npackets()
+{
+	qdisc_stats_get $swp3 11: .packets
+}
+
+get_nmirrored()
+{
+	link_stats_get _drop_test tx packets
+}
+
+send_packets()
+{
+	local proto=$1; shift
+	local pkts=$1; shift
+
+	$MZ $h2 -p $PKTSZ -a own -b $h3_mac -A 192.0.2.2 -B 192.0.2.3 -t $proto -q -c $pkts "$@"
+}
+
+# This sends traffic in an attempt to build a backlog of $size. Returns 0 on
+# success. After 10 failed attempts it bails out and returns 1. It dumps the
+# backlog size to stdout.
+build_backlog()
+{
+	local size=$1; shift
+	local proto=$1; shift
+
+	local i=0
+
+	while :; do
+		local cur=$(get_qdisc_backlog)
+		local diff=$((size - cur))
+		local pkts=$(((diff + PKTSZ - 1) / PKTSZ))
+
+		if ((cur >= size)); then
+			echo $cur
+			return 0
+		elif ((i++ > 10)); then
+			echo $cur
+			return 1
+		fi
+
+		send_packets $proto $pkts "$@"
+		sleep 1
+	done
+}
+
+check_marking()
+{
+	local cond=$1; shift
+
+	local npackets_0=$(get_qdisc_npackets)
+	local nmarked_0=$(get_nmarked)
+	sleep 5
+	local npackets_1=$(get_qdisc_npackets)
+	local nmarked_1=$(get_nmarked)
+
+	local nmarked_d=$((nmarked_1 - nmarked_0))
+	local npackets_d=$((npackets_1 - npackets_0))
+	local pct=$((100 * nmarked_d / npackets_d))
+
+	echo $pct
+	((pct $cond))
+}
+
+check_mirroring()
+{
+	local cond=$1; shift
+
+	local npackets_0=$(get_qdisc_npackets)
+	local nmirrored_0=$(get_nmirrored)
+	sleep 5
+	local npackets_1=$(get_qdisc_npackets)
+	local nmirrored_1=$(get_nmirrored)
+
+	local nmirrored_d=$((nmirrored_1 - nmirrored_0))
+	local npackets_d=$((npackets_1 - npackets_0))
+	local pct=$((100 * nmirrored_d / npackets_d))
+
+	echo $pct
+	((pct $cond))
+}
+
+ecn_test_common()
+{
+	local name=$1; shift
+	local limit=$1; shift
+	local backlog
+	local pct
+
+	# Build the below-the-limit backlog using UDP. We could use TCP just
+	# fine, but this way we get a proof that UDP is accepted when queue
+	# length is below the limit. The main stream is using TCP, and if the
+	# limit is misconfigured, we would see this traffic being ECN marked.
+	RET=0
+	backlog=$(build_backlog $((2 * limit / 3)) udp)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "$name backlog < limit"
+
+	# Now push TCP, because non-TCP traffic would be early-dropped after the
+	# backlog crosses the limit, and we want to make sure that the backlog
+	# is above the limit.
+	RET=0
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking ">= 95")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected >= 95."
+	log_test "$name backlog > limit"
+}
+
+do_ecn_test()
+{
+	local limit=$1; shift
+	local name=ECN
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	ecn_test_common "$name" $limit
+
+	# Up there we saw that UDP gets accepted when backlog is below the
+	# limit. Now that it is above, it should all get dropped, and backlog
+	# building should fail.
+	RET=0
+	build_backlog $((2 * limit)) udp >/dev/null
+	check_fail $? "UDP traffic went into backlog instead of being early-dropped"
+	log_test "$name backlog > limit: UDP early-dropped"
+
+	stop_traffic
+	sleep 1
+}
+
+do_ecn_nodrop_test()
+{
+	local limit=$1; shift
+	local name="ECN nodrop"
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	ecn_test_common "$name" $limit
+
+	# Up there we saw that UDP gets accepted when backlog is below the
+	# limit. Now that it is above, in nodrop mode, make sure it goes to
+	# backlog as well.
+	RET=0
+	build_backlog $((2 * limit)) udp >/dev/null
+	check_err $? "UDP traffic was early-dropped instead of getting into backlog"
+	log_test "$name backlog > limit: UDP not dropped"
+
+	stop_traffic
+	sleep 1
+}
+
+do_red_test()
+{
+	local limit=$1; shift
+	local backlog
+	local pct
+
+	# Use ECN-capable TCP to verify there's no marking even though the queue
+	# is above limit.
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+
+	# Pushing below the queue limit should work.
+	RET=0
+	backlog=$(build_backlog $((2 * limit / 3)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "RED backlog < limit"
+
+	# Pushing above should not.
+	RET=0
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_fail $? "Traffic went into backlog instead of being early-dropped"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "RED backlog > limit"
+
+	stop_traffic
+	sleep 1
+}
+
+do_red_qevent_test()
+{
+	local limit=$1; shift
+	local backlog
+	local base
+	local now
+	local pct
+
+	RET=0
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t udp -q &
+	sleep 1
+
+	tc filter add block 10 pref 1234 handle 102 matchall skip_hw \
+	   action mirred egress mirror dev _drop_test
+
+	# Push to the queue until it's at the limit. The configured limit is
+	# rounded by the qdisc, so this is the best we can do to get to the real
+	# limit.
+	build_backlog $((3 * limit / 2)) udp >/dev/null
+
+	base=$(get_nmirrored)
+	send_packets udp 100
+	sleep 1
+	now=$(get_nmirrored)
+	((now >= base + 100))
+	check_err $? "Dropped packets not observed: 100 expected, $((now - base)) seen"
+
+	tc filter del block 10 pref 1234 handle 102 matchall
+
+	base=$(get_nmirrored)
+	send_packets udp 100
+	sleep 1
+	now=$(get_nmirrored)
+	((now == base))
+	check_err $? "Dropped packets still observed: 0 expected, $((now - base)) seen"
+
+	log_test "RED early_dropped packets mirrored"
+
+	stop_traffic
+	sleep 1
+}
+
+do_ecn_qevent_test()
+{
+	local limit=$1; shift
+	local name=ECN
+
+	RET=0
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	tc filter add block 10 pref 1234 handle 102 matchall skip_hw \
+	   action mirred egress mirror dev _drop_test
+
+	backlog=$(build_backlog $((2 * limit / 3)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_mirroring "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% mirrored packets, expected == 0."
+
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_mirroring ">= 95")
+	check_err $? "backlog $backlog / $limit Got $pct% mirrored packets, expected >= 95."
+
+	tc filter del block 10 pref 1234 handle 102 matchall
+
+	log_test "ECN marked packets mirrored"
+
+	stop_traffic
+	sleep 1
+}
+
+install_qdisc()
+{
+	local -a args=("$@")
+
+	tc qdisc replace dev $swp3 parent 1:1 handle 11: red \
+	   limit 1M avpkt $PKTSZ probability 1 \
+	   min $BACKLOG max $((BACKLOG + 1)) burst 38 "${args[@]}"
+	sleep 1
+}
+
+uninstall_qdisc()
+{
+	tc qdisc del dev $swp3 parent 1:1
+}
+
+ecn_test()
+{
+	install_qdisc ecn
+	do_ecn_test $BACKLOG
+	uninstall_qdisc
+}
+
+ecn_nodrop_test()
+{
+	install_qdisc ecn nodrop
+	do_ecn_nodrop_test $BACKLOG
+	uninstall_qdisc
+}
+
+red_test()
+{
+	install_qdisc
+	do_red_test $BACKLOG
+	uninstall_qdisc
+}
+
+red_qevent_test()
+{
+	install_qdisc qevent early_drop block 10
+	do_red_qevent_test $BACKLOG
+	uninstall_qdisc
+}
+
+ecn_qevent_test()
+{
+	install_qdisc ecn qevent mark block 10
+	do_ecn_qevent_test $BACKLOG
+	uninstall_qdisc
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_core.sh b/tools/testing/selftests/net/forwarding/sch_tbf_core.sh
new file mode 100644
index 000000000..d1f26cb7c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_core.sh
@@ -0,0 +1,233 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends a stream of traffic from H1 through a switch, to H2. On the
+# egress port from the switch ($swp2), a shaper is installed. The test verifies
+# that the rates on the port match the configured shaper.
+#
+# In order to test per-class shaping, $swp2 actually contains TBF under PRIO or
+# ETS, with two different configurations. Traffic is prioritized using 802.1p.
+#
+# +-------------------------------------------+
+# | H1                                        |
+# |     + $h1.10                  $h1.11 +    |
+# |     | 192.0.2.1/28     192.0.2.17/28 |    |
+# |     |                                |    |
+# |     \______________    _____________/     |
+# |                    \ /                    |
+# |                     + $h1                 |
+# +---------------------|---------------------+
+#                       |
+# +---------------------|---------------------+
+# | SW                  + $swp1               |
+# |     _______________/ \_______________     |
+# |    /                                 \    |
+# |  +-|--------------+   +--------------|-+  |
+# |  | + $swp1.10     |   |     $swp1.11 + |  |
+# |  |                |   |                |  |
+# |  |     BR10       |   |       BR11     |  |
+# |  |                |   |                |  |
+# |  | + $swp2.10     |   |     $swp2.11 + |  |
+# |  +-|--------------+   +--------------|-+  |
+# |    \_______________   ______________/     |
+# |                    \ /                    |
+# |                     + $swp2               |
+# +---------------------|---------------------+
+#                       |
+# +---------------------|---------------------+
+# | H2                  + $h2                 |
+# |      ______________/ \______________      |
+# |     /                               \     |
+# |     |                               |     |
+# |     + $h2.10                 $h2.11 +     |
+# |       192.0.2.2/28    192.0.2.18/28       |
+# +-------------------------------------------+
+
+NUM_NETIFS=4
+CHECK_TC="yes"
+source $lib_dir/lib.sh
+
+ipaddr()
+{
+	local host=$1; shift
+	local vlan=$1; shift
+
+	echo 192.0.2.$((16 * (vlan - 10) + host))
+}
+
+host_create()
+{
+	local dev=$1; shift
+	local host=$1; shift
+
+	simple_if_init $dev
+	mtu_set $dev 10000
+
+	vlan_create $dev 10 v$dev $(ipaddr $host 10)/28
+	ip link set dev $dev.10 type vlan egress 0:0
+
+	vlan_create $dev 11 v$dev $(ipaddr $host 11)/28
+	ip link set dev $dev.11 type vlan egress 0:1
+}
+
+host_destroy()
+{
+	local dev=$1; shift
+
+	vlan_destroy $dev 11
+	vlan_destroy $dev 10
+	mtu_restore $dev
+	simple_if_fini $dev
+}
+
+h1_create()
+{
+	host_create $h1 1
+}
+
+h1_destroy()
+{
+	host_destroy $h1
+}
+
+h2_create()
+{
+	host_create $h2 2
+
+	tc qdisc add dev $h2 clsact
+	tc filter add dev $h2 ingress pref 1010 prot 802.1q \
+	   flower $TCFLAGS vlan_id 10 action pass
+	tc filter add dev $h2 ingress pref 1011 prot 802.1q \
+	   flower $TCFLAGS vlan_id 11 action pass
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	host_destroy $h2
+}
+
+switch_create()
+{
+	local intf
+	local vlan
+
+	ip link add dev br10 type bridge
+	ip link add dev br11 type bridge
+
+	for intf in $swp1 $swp2; do
+		ip link set dev $intf up
+		mtu_set $intf 10000
+
+		for vlan in 10 11; do
+			vlan_create $intf $vlan
+			ip link set dev $intf.$vlan master br$vlan
+			ip link set dev $intf.$vlan up
+		done
+	done
+
+	for vlan in 10 11; do
+		ip link set dev $swp1.$vlan type vlan ingress 0:0 1:1
+	done
+
+	ip link set dev br10 up
+	ip link set dev br11 up
+}
+
+switch_destroy()
+{
+	local intf
+	local vlan
+
+	# A test may have been interrupted mid-run, with Qdisc installed. Delete
+	# it here.
+	tc qdisc del dev $swp2 root 2>/dev/null
+
+	ip link set dev br11 down
+	ip link set dev br10 down
+
+	for intf in $swp2 $swp1; do
+		for vlan in 11 10; do
+			ip link set dev $intf.$vlan down
+			ip link set dev $intf.$vlan nomaster
+			vlan_destroy $intf $vlan
+		done
+
+		mtu_restore $intf
+		ip link set dev $intf down
+	done
+
+	ip link del dev br11
+	ip link del dev br10
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	swp4=${NETIFS[p7]}
+	swp5=${NETIFS[p8]}
+
+	h2_mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1.10 $(ipaddr 2 10) " vlan 10"
+	ping_test $h1.11 $(ipaddr 2 11) " vlan 11"
+}
+
+tbf_get_counter()
+{
+	local vlan=$1; shift
+
+	tc_rule_stats_get $h2 10$vlan ingress .bytes
+}
+
+do_tbf_test()
+{
+	local vlan=$1; shift
+	local mbit=$1; shift
+
+	start_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 2 $vlan) $h2_mac
+	sleep 5 # Wait for the burst to dwindle
+
+	local t2=$(busywait_for_counter 1000 +1 tbf_get_counter $vlan)
+	sleep 10
+	local t3=$(tbf_get_counter $vlan)
+	stop_traffic
+
+	RET=0
+
+	# Note: TBF uses 10^6 Mbits, not 2^20 ones.
+	local er=$((mbit * 1000 * 1000))
+	local nr=$(rate $t2 $t3 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-5 <= nr_pct && nr_pct <= 5))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-5%."
+
+	log_test "TC $((vlan - 10)): TBF rate ${mbit}Mbit"
+}
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_ets.sh b/tools/testing/selftests/net/forwarding/sch_tbf_ets.sh
new file mode 100755
index 000000000..84fb6cab8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_ets.sh
@@ -0,0 +1,6 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+QDISC="ets strict"
+: ${lib_dir:=.}
+source $lib_dir/sch_tbf_etsprio.sh
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh b/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh
new file mode 100644
index 000000000..8bd85da19
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh
@@ -0,0 +1,39 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	tbf_test
+"
+source $lib_dir/sch_tbf_core.sh
+
+tbf_test_one()
+{
+	local bs=$1; shift
+
+	tc qdisc replace dev $swp2 parent 10:3 handle 103: tbf \
+	   rate 400Mbit burst $bs limit 1M
+	tc qdisc replace dev $swp2 parent 10:2 handle 102: tbf \
+	   rate 800Mbit burst $bs limit 1M
+
+	do_tbf_test 10 400 $bs
+	do_tbf_test 11 800 $bs
+}
+
+tbf_test()
+{
+	# This test is used for both ETS and PRIO. Even though we only need two
+	# bands, PRIO demands a minimum of three.
+	tc qdisc add dev $swp2 root handle 10: $QDISC 3 priomap 2 1 0
+	tbf_test_one 128K
+	tc qdisc del dev $swp2 root
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_prio.sh b/tools/testing/selftests/net/forwarding/sch_tbf_prio.sh
new file mode 100755
index 000000000..9c8cb1cb9
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_prio.sh
@@ -0,0 +1,6 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+QDISC="prio bands"
+: ${lib_dir:=.}
+source $lib_dir/sch_tbf_etsprio.sh
diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_root.sh b/tools/testing/selftests/net/forwarding/sch_tbf_root.sh
new file mode 100755
index 000000000..72aa21ba8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_tbf_root.sh
@@ -0,0 +1,33 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	tbf_test
+"
+: ${lib_dir:=.}
+source $lib_dir/sch_tbf_core.sh
+
+tbf_test_one()
+{
+	local bs=$1; shift
+
+	tc qdisc replace dev $swp2 root handle 108: tbf \
+	   rate 400Mbit burst $bs limit 1M
+	do_tbf_test 10 400 $bs
+}
+
+tbf_test()
+{
+	tbf_test_one 128K
+	tc qdisc del dev $swp2 root
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/settings b/tools/testing/selftests/net/forwarding/settings
new file mode 100644
index 000000000..e7b941753
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/settings
@@ -0,0 +1 @@
+timeout=0
diff --git a/tools/testing/selftests/net/forwarding/skbedit_priority.sh b/tools/testing/selftests/net/forwarding/skbedit_priority.sh
new file mode 100755
index 000000000..bde11dc27
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/skbedit_priority.sh
@@ -0,0 +1,170 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on
+# egress of $swp2, the traffic is acted upon by an action skbedit priority. The
+# new priority should be taken into account when classifying traffic on the PRIO
+# qdisc at $swp2. The test verifies that for different priority values, the
+# traffic ends up in expected PRIO band.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  |                                                             PRIO   |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_ingress
+	test_egress
+"
+
+NUM_NETIFS=4
+source lib.sh
+
+: ${HIT_TIMEOUT:=2000} # ms
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+switch_create()
+{
+	ip link add name br1 up type bridge vlan_filtering 1
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+	tc qdisc add dev $swp2 root handle 10: \
+	   prio bands 8 priomap 7 6 5 4 3 2 1 0
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 root
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+test_skbedit_priority_one()
+{
+	local locus=$1; shift
+	local prio=$1; shift
+	local classid=$1; shift
+
+	RET=0
+
+	tc filter add $locus handle 101 pref 1 \
+	   flower action skbedit priority $prio
+
+	local pkt0=$(qdisc_parent_stats_get $swp2 $classid .packets)
+	local pkt2=$(tc_rule_handle_stats_get "$locus" 101)
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 10 -d 20msec -p 100 \
+	    -a own -b $h2mac -A 192.0.2.1 -B 192.0.2.2 -q
+
+	local pkt1
+	pkt1=$(busywait "$HIT_TIMEOUT" until_counter_is ">= $((pkt0 + 10))" \
+			qdisc_parent_stats_get $swp2 $classid .packets)
+	check_err $? "Expected to get 10 packets on class $classid, but got $((pkt1 - pkt0))."
+
+	local pkt3=$(tc_rule_handle_stats_get "$locus" 101)
+	((pkt3 >= pkt2 + 10))
+	check_err $? "Expected to get 10 packets on skbedit rule but got $((pkt3 - pkt2))."
+
+	log_test "$locus skbedit priority $prio -> classid $classid"
+
+	tc filter del $locus pref 1
+}
+
+test_ingress()
+{
+	local prio
+
+	for prio in {0..7}; do
+		test_skbedit_priority_one "dev $swp1 ingress" \
+					  $prio 10:$((8 - prio))
+	done
+}
+
+test_egress()
+{
+	local prio
+
+	for prio in {0..7}; do
+		test_skbedit_priority_one "dev $swp2 egress" \
+					  $prio 10:$((8 - prio))
+	done
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_actions.sh b/tools/testing/selftests/net/forwarding/tc_actions.sh
new file mode 100755
index 000000000..1e2703128
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_actions.sh
@@ -0,0 +1,269 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="gact_drop_and_ok_test mirred_egress_redirect_test \
+	mirred_egress_mirror_test matchall_mirred_egress_mirror_test \
+	gact_trap_test mirred_egress_to_ingress_tcp_test"
+NUM_NETIFS=4
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24
+}
+
+switch_create()
+{
+	simple_if_init $swp1 192.0.2.2/24
+	tc qdisc add dev $swp1 clsact
+
+	simple_if_init $swp2 192.0.2.1/24
+}
+
+switch_destroy()
+{
+	simple_if_fini $swp2 192.0.2.1/24
+
+	tc qdisc del dev $swp1 clsact
+	simple_if_fini $swp1 192.0.2.2/24
+}
+
+mirred_egress_test()
+{
+	local action=$1
+	local protocol=$2
+	local classifier=$3
+	local classifier_args=$4
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched without redirect rule inserted"
+
+	tc filter add dev $swp1 ingress protocol $protocol pref 1 handle 101 \
+		$classifier $tcflags $classifier_args \
+		action mirred egress $action dev $swp2
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match incoming $action packet"
+
+	tc filter del dev $swp1 ingress protocol $protocol pref 1 handle 101 \
+		$classifier
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "mirred egress $classifier $action ($tcflags)"
+}
+
+gact_drop_and_ok_test()
+{
+	RET=0
+
+	tc filter add dev $swp1 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $swp1 ingress" 102 1
+	check_err $? "Packet was not dropped"
+
+	tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action ok
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $swp1 ingress" 101 1
+	check_err $? "Did not see passed packet"
+
+	tc_check_packets "dev $swp1 ingress" 102 2
+	check_fail $? "Packet was dropped and it should not reach here"
+
+	tc filter del dev $swp1 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "gact drop and ok ($tcflags)"
+}
+
+gact_trap_test()
+{
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \
+		skip_hw dst_ip 192.0.2.2 action drop
+	tc filter add dev $swp1 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.2 action mirred egress redirect \
+		dev $swp2
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $swp1 ingress" 101 1
+	check_fail $? "Saw packet without trap rule inserted"
+
+	tc filter add dev $swp1 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action trap
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $swp1 ingress" 102 1
+	check_err $? "Packet was not trapped"
+
+	tc_check_packets "dev $swp1 ingress" 101 1
+	check_err $? "Did not see trapped packet"
+
+	tc filter del dev $swp1 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $swp1 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "trap ($tcflags)"
+}
+
+mirred_egress_to_ingress_tcp_test()
+{
+	local tmpfile=$(mktemp) tmpfile1=$(mktemp)
+
+	RET=0
+	dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$tmpfile
+	tc filter add dev $h1 protocol ip pref 100 handle 100 egress flower \
+		$tcflags ip_proto tcp src_ip 192.0.2.1 dst_ip 192.0.2.2 \
+			action ct commit nat src addr 192.0.2.2 pipe \
+			action ct clear pipe \
+			action ct commit nat dst addr 192.0.2.1 pipe \
+			action ct clear pipe \
+			action skbedit ptype host pipe \
+			action mirred ingress redirect dev $h1
+	tc filter add dev $h1 protocol ip pref 101 handle 101 egress flower \
+		$tcflags ip_proto icmp \
+			action mirred ingress redirect dev $h1
+	tc filter add dev $h1 protocol ip pref 102 handle 102 ingress flower \
+		ip_proto icmp \
+			action drop
+
+	ip vrf exec v$h1 nc --recv-only -w10 -l -p 12345 -o $tmpfile1  &
+	local rpid=$!
+	ip vrf exec v$h1 nc -w1 --send-only 192.0.2.2 12345 <$tmpfile
+	wait -n $rpid
+	cmp -s $tmpfile $tmpfile1
+	check_err $? "server output check failed"
+
+	$MZ $h1 -c 10 -p 64 -a $h1mac -b $h1mac -A 192.0.2.1 -B 192.0.2.1 \
+		-t icmp "ping,id=42,seq=5" -q
+	tc_check_packets "dev $h1 egress" 101 10
+	check_err $? "didn't mirred redirect ICMP"
+	tc_check_packets "dev $h1 ingress" 102 10
+	check_err $? "didn't drop mirred ICMP"
+	local overlimits=$(tc_rule_stats_get ${h1} 101 egress .overlimits)
+	test ${overlimits} = 10
+	check_err $? "wrong overlimits, expected 10 got ${overlimits}"
+
+	tc filter del dev $h1 egress protocol ip pref 100 handle 100 flower
+	tc filter del dev $h1 egress protocol ip pref 101 handle 101 flower
+	tc filter del dev $h1 ingress protocol ip pref 102 handle 102 flower
+
+	rm -f $tmpfile $tmpfile1
+	log_test "mirred_egress_to_ingress_tcp ($tcflags)"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	swp1origmac=$(mac_get $swp1)
+	swp2origmac=$(mac_get $swp2)
+	ip link set $swp1 address $h2mac
+	ip link set $swp2 address $h1mac
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	ip link set $swp2 address $swp2origmac
+	ip link set $swp1 address $swp1origmac
+}
+
+mirred_egress_redirect_test()
+{
+	mirred_egress_test "redirect" "ip" "flower" "dst_ip 192.0.2.2"
+}
+
+mirred_egress_mirror_test()
+{
+	mirred_egress_test "mirror" "ip" "flower" "dst_ip 192.0.2.2"
+}
+
+matchall_mirred_egress_mirror_test()
+{
+	mirred_egress_test "mirror" "all" "matchall" ""
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_chains.sh b/tools/testing/selftests/net/forwarding/tc_chains.sh
new file mode 100755
index 000000000..2934fb5ed
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_chains.sh
@@ -0,0 +1,205 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="unreachable_chain_test gact_goto_chain_test create_destroy_chain \
+	   template_filter_fits"
+NUM_NETIFS=2
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24
+}
+
+unreachable_chain_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower $tcflags dst_mac $h2mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 1101 1
+	check_fail $? "matched on filter in unreachable chain"
+
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower
+
+	log_test "unreachable chain ($tcflags)"
+}
+
+gact_goto_chain_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower $tcflags dst_mac $h2mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_mac $h2mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_mac $h2mac action goto chain 1
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter with goto chain action"
+
+	tc_check_packets "dev $h2 ingress" 1101 1
+	check_err $? "Did not match on correct filter in chain 1"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower
+
+	log_test "gact goto chain ($tcflags)"
+}
+
+create_destroy_chain()
+{
+	RET=0
+
+	tc chain add dev $h2 ingress
+	check_err $? "Failed to create default chain"
+
+	output="$(tc -j chain get dev $h2 ingress)"
+	check_err $? "Failed to get default chain"
+
+	echo $output | jq -e ".[] | select(.chain == 0)" &> /dev/null
+	check_err $? "Unexpected output for default chain"
+
+	tc chain add dev $h2 ingress chain 1
+	check_err $? "Failed to create chain 1"
+
+	output="$(tc -j chain get dev $h2 ingress chain 1)"
+	check_err $? "Failed to get chain 1"
+
+	echo $output | jq -e ".[] | select(.chain == 1)" &> /dev/null
+	check_err $? "Unexpected output for chain 1"
+
+	output="$(tc -j chain show dev $h2 ingress)"
+	check_err $? "Failed to dump chains"
+
+	echo $output | jq -e ".[] | select(.chain == 0)" &> /dev/null
+	check_err $? "Can't find default chain in dump"
+
+	echo $output | jq -e ".[] | select(.chain == 1)" &> /dev/null
+	check_err $? "Can't find chain 1 in dump"
+
+	tc chain del dev $h2 ingress
+	check_err $? "Failed to destroy default chain"
+
+	tc chain del dev $h2 ingress chain 1
+	check_err $? "Failed to destroy chain 1"
+
+	log_test "create destroy chain"
+}
+
+template_filter_fits()
+{
+	RET=0
+
+	tc chain add dev $h2 ingress protocol ip \
+		flower dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null
+	tc chain add dev $h2 ingress chain 1 protocol ip \
+		flower src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1101 \
+		flower dst_mac $h2mac action drop
+	check_err $? "Failed to insert filter which fits template"
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1102 \
+		flower src_mac $h2mac action drop &> /dev/null
+	check_fail $? "Incorrectly succeded to insert filter which does not template"
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower src_mac $h2mac action drop
+	check_err $? "Failed to insert filter which fits template"
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1102 \
+		flower dst_mac $h2mac action drop &> /dev/null
+	check_fail $? "Incorrectly succeded to insert filter which does not template"
+
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1102 \
+		flower &> /dev/null
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower &> /dev/null
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1102 \
+		flower &> /dev/null
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1101 \
+		flower &> /dev/null
+
+	tc chain del dev $h2 ingress chain 1
+	tc chain del dev $h2 ingress
+
+	log_test "template filter fits"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+check_tc_chain_support
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_common.sh b/tools/testing/selftests/net/forwarding/tc_common.sh
new file mode 100644
index 000000000..0e18e8be6
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_common.sh
@@ -0,0 +1,26 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+CHECK_TC="yes"
+
+# Can be overridden by the configuration file. See lib.sh
+TC_HIT_TIMEOUT=${TC_HIT_TIMEOUT:=1000} # ms
+
+tc_check_packets()
+{
+	local id=$1
+	local handle=$2
+	local count=$3
+
+	busywait "$TC_HIT_TIMEOUT" until_counter_is "== $count" \
+		 tc_rule_handle_stats_get "$id" "$handle" > /dev/null
+}
+
+tc_check_packets_hitting()
+{
+	local id=$1
+	local handle=$2
+
+	busywait "$TC_HIT_TIMEOUT" until_counter_is "> 0" \
+		 tc_rule_handle_stats_get "$id" "$handle" > /dev/null
+}
diff --git a/tools/testing/selftests/net/forwarding/tc_flower.sh b/tools/testing/selftests/net/forwarding/tc_flower.sh
new file mode 100755
index 000000000..b7cdf75ef
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_flower.sh
@@ -0,0 +1,411 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="match_dst_mac_test match_src_mac_test match_dst_ip_test \
+	match_src_ip_test match_ip_flags_test match_pcp_test match_vlan_test \
+	match_ip_tos_test match_indev_test match_ip_ttl_test"
+NUM_NETIFS=2
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 198.51.100.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24
+}
+
+match_dst_mac_test()
+{
+	local dummy_mac=de:ad:be:ef:aa:aa
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_mac $dummy_mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_mac $h2mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 0
+	check_fail $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "dst_mac match ($tcflags)"
+}
+
+match_src_mac_test()
+{
+	local dummy_mac=de:ad:be:ef:aa:aa
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags src_mac $dummy_mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags src_mac $h1mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 0
+	check_fail $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "src_mac match ($tcflags)"
+}
+
+match_dst_ip_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 198.51.100.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match on correct filter with mask"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "dst_ip match ($tcflags)"
+}
+
+match_src_ip_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags src_ip 198.51.100.1 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags src_ip 192.0.2.1 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags src_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match on correct filter with mask"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "src_ip match ($tcflags)"
+}
+
+match_ip_flags_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags ip_flags frag action continue
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags ip_flags firstfrag action continue
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags ip_flags nofirstfrag action continue
+	tc filter add dev $h2 ingress protocol ip pref 4 handle 104 flower \
+		$tcflags ip_flags nofrag action drop
+
+	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "frag=0" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on wrong frag filter (nofrag)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_fail $? "Matched on wrong firstfrag filter (nofrag)"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match on nofirstfrag filter (nofrag) "
+
+	tc_check_packets "dev $h2 ingress" 104 1
+	check_err $? "Did not match on nofrag filter (nofrag)"
+
+	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "frag=0,mf" -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on frag filter (1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match fistfrag filter (1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Matched on wrong nofirstfrag filter (1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 104 1
+	check_err $? "Match on wrong nofrag filter (1stfrag)"
+
+	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "frag=256,mf" -q
+	$MZ $h1 -c 1 -p 1000 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "frag=256" -q
+
+	tc_check_packets "dev $h2 ingress" 101 3
+	check_err $? "Did not match on frag filter (no1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Matched on wrong firstfrag filter (no1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 103 3
+	check_err $? "Did not match on nofirstfrag filter (no1stfrag)"
+
+	tc_check_packets "dev $h2 ingress" 104 1
+	check_err $? "Matched on nofrag filter (no1stfrag)"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 4 handle 104 flower
+
+	log_test "ip_flags match ($tcflags)"
+}
+
+match_pcp_test()
+{
+	RET=0
+
+	vlan_create $h2 85 v$h2 192.0.2.11/24
+
+	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 101 \
+		flower vlan_prio 6 $tcflags dst_mac $h2mac action drop
+	tc filter add dev $h2 ingress protocol 802.1q pref 2 handle 102 \
+		flower vlan_prio 7 $tcflags dst_mac $h2mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 7:85 -t ip -q
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 0:85 -t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 0
+	check_err $? "Matched on specified PCP when should not"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on specified PCP"
+
+	tc filter del dev $h2 ingress protocol 802.1q pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 101 flower
+
+	vlan_destroy $h2 85
+
+	log_test "PCP match ($tcflags)"
+}
+
+match_vlan_test()
+{
+	RET=0
+
+	vlan_create $h2 85 v$h2 192.0.2.11/24
+	vlan_create $h2 75 v$h2 192.0.2.10/24
+
+	tc filter add dev $h2 ingress protocol 802.1q pref 1 handle 101 \
+		flower vlan_id 75 $tcflags action drop
+	tc filter add dev $h2 ingress protocol 802.1q pref 2 handle 102 \
+		flower vlan_id 85 $tcflags action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -B 192.0.2.11 -Q 0:85 -t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 0
+	check_err $? "Matched on specified VLAN when should not"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on specified VLAN"
+
+	tc filter del dev $h2 ingress protocol 802.1q pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol 802.1q pref 1 handle 101 flower
+
+	vlan_destroy $h2 75
+	vlan_destroy $h2 85
+
+	log_test "VLAN match ($tcflags)"
+}
+
+match_ip_tos_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 ip_tos 0x20 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 ip_tos 0x18 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip tos=18 -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter (0x18)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter (0x18)"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip tos=20 -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_fail $? "Matched on a wrong filter (0x20)"
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter (0x20)"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "ip_tos match ($tcflags)"
+}
+
+match_ip_ttl_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 ip_ttl 63 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "ttl=63" -q
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "ttl=63,mf,frag=256" -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_fail $? "Matched on the wrong filter (no check on ttl)"
+
+	tc_check_packets "dev $h2 ingress" 101 2
+	check_err $? "Did not match on correct filter (ttl=63)"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip "ttl=255" -q
+
+	tc_check_packets "dev $h2 ingress" 101 3
+	check_fail $? "Matched on a wrong filter (ttl=63)"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter (no check on ttl)"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "ip_ttl match ($tcflags)"
+}
+
+match_indev_test()
+{
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags indev $h1 dst_mac $h2mac action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags indev $h2 dst_mac $h2mac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "indev match ($tcflags)"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_flower_router.sh b/tools/testing/selftests/net/forwarding/tc_flower_router.sh
new file mode 100755
index 000000000..4aee9c9e6
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_flower_router.sh
@@ -0,0 +1,172 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="match_indev_egress_test"
+NUM_NETIFS=6
+source tc_common.sh
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.1.1/24
+
+	ip route add 192.0.2.0/24 vrf v$h1 nexthop via 192.0.1.2
+	ip route add 192.0.3.0/24 vrf v$h1 nexthop via 192.0.1.2
+}
+
+h1_destroy()
+{
+	ip route del 192.0.3.0/24 vrf v$h1
+	ip route del 192.0.2.0/24 vrf v$h1
+
+	simple_if_fini $h1 192.0.1.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.1/24
+
+	ip route add 192.0.1.0/24 vrf v$h2 nexthop via 192.0.2.2
+	ip route add 192.0.3.0/24 vrf v$h2 nexthop via 192.0.2.2
+}
+
+h2_destroy()
+{
+	ip route del 192.0.3.0/24 vrf v$h2
+	ip route del 192.0.1.0/24 vrf v$h2
+
+	simple_if_fini $h2 192.0.2.1/24
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.3.1/24
+
+	ip route add 192.0.1.0/24 vrf v$h3 nexthop via 192.0.3.2
+	ip route add 192.0.2.0/24 vrf v$h3 nexthop via 192.0.3.2
+}
+
+h3_destroy()
+{
+	ip route del 192.0.2.0/24 vrf v$h3
+	ip route del 192.0.1.0/24 vrf v$h3
+
+	simple_if_fini $h3 192.0.3.1/24
+}
+
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	tc qdisc add dev $rp3 clsact
+
+	ip address add 192.0.1.2/24 dev $rp1
+	ip address add 192.0.2.2/24 dev $rp2
+	ip address add 192.0.3.2/24 dev $rp3
+}
+
+router_destroy()
+{
+	ip address del 192.0.3.2/24 dev $rp3
+	ip address del 192.0.2.2/24 dev $rp2
+	ip address del 192.0.1.2/24 dev $rp1
+
+	tc qdisc del dev $rp3 clsact
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+match_indev_egress_test()
+{
+	RET=0
+
+	tc filter add dev $rp3 egress protocol ip pref 1 handle 101 flower \
+		$tcflags indev $rp1 dst_ip 192.0.3.1 action drop
+	tc filter add dev $rp3 egress protocol ip pref 2 handle 102 flower \
+		$tcflags indev $rp2 dst_ip 192.0.3.1 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $rp1mac -A 192.0.1.1 -B 192.0.3.1 \
+		-t ip -q
+
+	tc_check_packets "dev $rp3 egress" 102 1
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $rp3 egress" 101 1
+	check_err $? "Did not match on correct filter"
+
+	$MZ $h2 -c 1 -p 64 -a $h2mac -b $rp2mac -A 192.0.2.1 -B 192.0.3.1 \
+		-t ip -q
+
+	tc_check_packets "dev $rp3 egress" 101 2
+	check_fail $? "Matched on a wrong filter"
+
+	tc_check_packets "dev $rp3 egress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $rp3 egress protocol ip pref 2 handle 102 flower
+	tc filter del dev $rp3 egress protocol ip pref 1 handle 101 flower
+
+	log_test "indev egress match ($tcflags)"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	h2=${NETIFS[p3]}
+	rp2=${NETIFS[p4]}
+
+	h3=${NETIFS[p5]}
+	rp3=${NETIFS[p6]}
+
+	h1mac=$(mac_get $h1)
+	rp1mac=$(mac_get $rp1)
+	h2mac=$(mac_get $h2)
+	rp2mac=$(mac_get $rp2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_police.sh b/tools/testing/selftests/net/forwarding/tc_police.sh
new file mode 100755
index 000000000..eb09acdcb
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_police.sh
@@ -0,0 +1,385 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test tc-police action.
+#
+# +---------------------------------+
+# | H1 (vrf)                        |
+# |    + $h1                        |
+# |    | 192.0.2.1/24               |
+# |    |                            |
+# |    |  default via 192.0.2.2     |
+# +----|----------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# | SW |                                                                      |
+# |    + $rp1                                                                 |
+# |        192.0.2.2/24                                                       |
+# |                                                                           |
+# |        198.51.100.2/24                           203.0.113.2/24           |
+# |    + $rp2                                    + $rp3                       |
+# |    |                                         |                            |
+# +----|-----------------------------------------|----------------------------+
+#      |                                         |
+# +----|----------------------------+       +----|----------------------------+
+# |    |  default via 198.51.100.2  |       |    |  default via 203.0.113.2   |
+# |    |                            |       |    |                            |
+# |    | 198.51.100.1/24            |       |    | 203.0.113.1/24             |
+# |    + $h2                        |       |    + $h3                        |
+# | H2 (vrf)                        |       | H3 (vrf)                        |
+# +---------------------------------+       +---------------------------------+
+
+ALL_TESTS="
+	police_rx_test
+	police_tx_test
+	police_shared_test
+	police_rx_mirror_test
+	police_tx_mirror_test
+	police_mtu_rx_test
+	police_mtu_tx_test
+"
+NUM_NETIFS=6
+source tc_common.sh
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+
+	ip -4 route add default vrf v$h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del default vrf v$h1 nexthop via 192.0.2.2
+
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 198.51.100.1/24
+
+	ip -4 route add default vrf v$h2 nexthop via 198.51.100.2
+
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+
+	ip -4 route del default vrf v$h2 nexthop via 198.51.100.2
+
+	simple_if_fini $h2 198.51.100.1/24
+}
+
+h3_create()
+{
+	simple_if_init $h3 203.0.113.1/24
+
+	ip -4 route add default vrf v$h3 nexthop via 203.0.113.2
+
+	tc qdisc add dev $h3 clsact
+}
+
+h3_destroy()
+{
+	tc qdisc del dev $h3 clsact
+
+	ip -4 route del default vrf v$h3 nexthop via 203.0.113.2
+
+	simple_if_fini $h3 203.0.113.1/24
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	__addr_add_del $rp1 add 192.0.2.2/24
+	__addr_add_del $rp2 add 198.51.100.2/24
+	__addr_add_del $rp3 add 203.0.113.2/24
+
+	tc qdisc add dev $rp1 clsact
+	tc qdisc add dev $rp2 clsact
+}
+
+router_destroy()
+{
+	tc qdisc del dev $rp2 clsact
+	tc qdisc del dev $rp1 clsact
+
+	__addr_add_del $rp3 del 203.0.113.2/24
+	__addr_add_del $rp2 del 198.51.100.2/24
+	__addr_add_del $rp1 del 192.0.2.2/24
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+police_common_test()
+{
+	local test_name=$1; shift
+
+	RET=0
+
+	# Rule to measure bandwidth on ingress of $h2
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 0 -q &
+
+	local t0=$(tc_rule_stats_get $h2 1 ingress .bytes)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h2 1 ingress .bytes)
+
+	local er=$((80 * 1000 * 1000))
+	local nr=$(rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	log_test "$test_name"
+
+	{ kill %% && wait %%; } 2>/dev/null
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_rx_test()
+{
+	# Rule to police traffic destined to $h2 on ingress of $rp1
+	tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police rate 80mbit burst 16k conform-exceed drop/ok
+
+	police_common_test "police on rx"
+
+	tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_tx_test()
+{
+	# Rule to police traffic destined to $h2 on egress of $rp2
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police rate 80mbit burst 16k conform-exceed drop/ok
+
+	police_common_test "police on tx"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+}
+
+police_shared_common_test()
+{
+	local dport=$1; shift
+	local test_name=$1; shift
+
+	RET=0
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=$dport -p 1000 -c 0 -q &
+
+	local t0=$(tc_rule_stats_get $h2 1 ingress .bytes)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h2 1 ingress .bytes)
+
+	local er=$((80 * 1000 * 1000))
+	local nr=$(rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	log_test "$test_name"
+
+	{ kill %% && wait %%; } 2>/dev/null
+}
+
+police_shared_test()
+{
+	# Rule to measure bandwidth on ingress of $h2
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp src_port 12345 \
+		action drop
+
+	# Rule to police traffic destined to $h2 on ingress of $rp1
+	tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police rate 80mbit burst 16k conform-exceed drop/ok \
+		index 10
+
+	# Rule to police a different flow destined to $h2 on egress of $rp2
+	# using same policer
+	tc filter add dev $rp2 egress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 22222 \
+		action police index 10
+
+	police_shared_common_test 54321 "police with shared policer - rx"
+
+	police_shared_common_test 22222 "police with shared policer - tx"
+
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+	tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_mirror_common_test()
+{
+	local pol_if=$1; shift
+	local dir=$1; shift
+	local test_name=$1; shift
+
+	RET=0
+
+	# Rule to measure bandwidth on ingress of $h2
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	# Rule to measure bandwidth of mirrored traffic on ingress of $h3
+	tc filter add dev $h3 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	# Rule to police traffic destined to $h2 and mirror to $h3
+	tc filter add dev $pol_if $dir protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police rate 80mbit burst 16k conform-exceed drop/pipe \
+		action mirred egress mirror dev $rp3
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 0 -q &
+
+	local t0=$(tc_rule_stats_get $h2 1 ingress .bytes)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h2 1 ingress .bytes)
+
+	local er=$((80 * 1000 * 1000))
+	local nr=$(rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	local t0=$(tc_rule_stats_get $h3 1 ingress .bytes)
+	sleep 10
+	local t1=$(tc_rule_stats_get $h3 1 ingress .bytes)
+
+	local er=$((80 * 1000 * 1000))
+	local nr=$(rate $t0 $t1 10)
+	local nr_pct=$((100 * (nr - er) / er))
+	((-10 <= nr_pct && nr_pct <= 10))
+	check_err $? "Expected rate $(humanize $er), got $(humanize $nr), which is $nr_pct% off. Required accuracy is +-10%."
+
+	log_test "$test_name"
+
+	{ kill %% && wait %%; } 2>/dev/null
+	tc filter del dev $pol_if $dir protocol ip pref 1 handle 101 flower
+	tc filter del dev $h3 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+}
+
+police_rx_mirror_test()
+{
+	police_mirror_common_test $rp1 ingress "police rx and mirror"
+}
+
+police_tx_mirror_test()
+{
+	police_mirror_common_test $rp2 egress "police tx and mirror"
+}
+
+police_mtu_common_test() {
+	RET=0
+
+	local test_name=$1; shift
+	local dev=$1; shift
+	local direction=$1; shift
+
+	tc filter add dev $dev $direction protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action police mtu 1042 conform-exceed drop/ok
+
+	# to count "conform" packets
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		dst_ip 198.51.100.1 ip_proto udp dst_port 54321 \
+		action drop
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1001 -c 10 -q
+
+	mausezahn $h1 -a own -b $(mac_get $rp1) -A 192.0.2.1 -B 198.51.100.1 \
+		-t udp sp=12345,dp=54321 -p 1000 -c 3 -q
+
+	tc_check_packets "dev $dev $direction" 101 13
+	check_err $? "wrong packet counter"
+
+	# "exceed" packets
+	local overlimits_t0=$(tc_rule_stats_get ${dev} 1 ${direction} .overlimits)
+	test ${overlimits_t0} = 10
+	check_err $? "wrong overlimits, expected 10 got ${overlimits_t0}"
+
+	# "conform" packets
+	tc_check_packets "dev $h2 ingress" 101 3
+	check_err $? "forwarding error"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $dev $direction protocol ip pref 1 handle 101 flower
+
+	log_test "$test_name"
+}
+
+police_mtu_rx_test()
+{
+	police_mtu_common_test "police mtu (rx)" $rp1 ingress
+}
+
+police_mtu_tx_test()
+{
+	police_mtu_common_test "police mtu (tx)" $rp2 egress
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	h3_create
+	router_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	router_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_shblocks.sh b/tools/testing/selftests/net/forwarding/tc_shblocks.sh
new file mode 100755
index 000000000..772e00ac3
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_shblocks.sh
@@ -0,0 +1,152 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="shared_block_test match_indev_test"
+NUM_NETIFS=4
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.1/24
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.1/24
+}
+
+switch_create()
+{
+	simple_if_init $swp1 192.0.2.2/24
+	tc qdisc add dev $swp1 ingress_block 22 egress_block 23 clsact
+
+	simple_if_init $swp2 192.0.2.2/24
+	tc qdisc add dev $swp2 ingress_block 22 egress_block 23 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	simple_if_fini $swp2 192.0.2.2/24
+
+	tc qdisc del dev $swp1 clsact
+	simple_if_fini $swp1 192.0.2.2/24
+}
+
+shared_block_test()
+{
+	RET=0
+
+	tc filter add block 22 protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "block 22" 101 1
+	check_err $? "Did not match first incoming packet on a block"
+
+	$MZ $h2 -c 1 -p 64 -a $h2mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "block 22" 101 2
+	check_err $? "Did not match second incoming packet on a block"
+
+	tc filter del block 22 protocol ip pref 1 handle 101 flower
+
+	log_test "shared block ($tcflags)"
+}
+
+match_indev_test()
+{
+	RET=0
+
+	tc filter add block 22 protocol ip pref 1 handle 101 flower \
+		$tcflags indev $swp1 dst_mac $swmac action drop
+	tc filter add block 22 protocol ip pref 2 handle 102 flower \
+		$tcflags indev $swp2 dst_mac $swmac action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "block 22" 101 1
+	check_err $? "Did not match first incoming packet on a block"
+
+	$MZ $h2 -c 1 -p 64 -a $h2mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "block 22" 102 1
+	check_err $? "Did not match second incoming packet on a block"
+
+	tc filter del block 22 protocol ip pref 1 handle 101 flower
+	tc filter del block 22 protocol ip pref 2 handle 102 flower
+
+	log_test "indev match ($tcflags)"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	swmac=$(mac_get $swp1)
+	swp2origmac=$(mac_get $swp2)
+	ip link set $swp2 address $swmac
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	ip link set $swp2 address $swp2origmac
+}
+
+check_tc_shblock_support
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh b/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh
new file mode 100755
index 000000000..45378905c
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_vlan_modify.sh
@@ -0,0 +1,164 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	vlan_modify_ingress
+	vlan_modify_egress
+"
+
+NUM_NETIFS=4
+CHECK_TC="yes"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	vlan_create $h1 85 v$h1 192.0.2.17/28 2001:db8:2::1/64
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 85
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
+	vlan_create $h2 65 v$h2 192.0.2.18/28 2001:db8:2::2/64
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 65
+	simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+
+	bridge vlan add dev $swp1 vid 85
+	bridge vlan add dev $swp2 vid 65
+
+	bridge vlan add dev $swp2 vid 85
+	bridge vlan add dev $swp1 vid 65
+
+	tc qdisc add dev $swp1 clsact
+	tc qdisc add dev $swp2 clsact
+}
+
+switch_destroy()
+{
+	tc qdisc del dev $swp2 clsact
+	tc qdisc del dev $swp1 clsact
+
+	bridge vlan del vid 65 dev $swp1
+	bridge vlan del vid 85 dev $swp2
+
+	bridge vlan del vid 65 dev $swp2
+	bridge vlan del vid 85 dev $swp1
+
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+vlan_modify_ingress()
+{
+	RET=0
+
+	ping_do $h1.85 192.0.2.18
+	check_fail $? "ping between two different vlans passed when should not"
+
+	ping6_do $h1.85 2001:db8:2::2
+	check_fail $? "ping6 between two different vlans passed when should not"
+
+	tc filter add dev $swp1 ingress protocol all pref 1 handle 1 \
+		flower action vlan modify id 65
+	tc filter add dev $swp2 ingress protocol all pref 1 handle 1 \
+		flower action vlan modify id 85
+
+	ping_do $h1.85 192.0.2.18
+	check_err $? "ping between two different vlans failed when should not"
+
+	ping6_do $h1.85 2001:db8:2::2
+	check_err $? "ping6 between two different vlans failed when should not"
+
+	log_test "VLAN modify at ingress"
+
+	tc filter del dev $swp2 ingress protocol all pref 1 handle 1 flower
+	tc filter del dev $swp1 ingress protocol all pref 1 handle 1 flower
+}
+
+vlan_modify_egress()
+{
+	RET=0
+
+	ping_do $h1.85 192.0.2.18
+	check_fail $? "ping between two different vlans passed when should not"
+
+	ping6_do $h1.85 2001:db8:2::2
+	check_fail $? "ping6 between two different vlans passed when should not"
+
+	tc filter add dev $swp1 egress protocol all pref 1 handle 1 \
+		flower action vlan modify id 85
+	tc filter add dev $swp2 egress protocol all pref 1 handle 1 \
+		flower action vlan modify id 65
+
+	ping_do $h1.85 192.0.2.18
+	check_err $? "ping between two different vlans failed when should not"
+
+	ping6_do $h1.85 2001:db8:2::2
+	check_err $? "ping6 between two different vlans failed when should not"
+
+	log_test "VLAN modify at egress"
+
+	tc filter del dev $swp2 egress protocol all pref 1 handle 1 flower
+	tc filter del dev $swp1 egress protocol all pref 1 handle 1 flower
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
new file mode 100755
index 000000000..0727e2012
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh
@@ -0,0 +1,577 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +---------------------------+                +------------------------------+
+# |                    vrf-h1 |                |                       vrf-h2 |
+# |    + $h1                  |                |    + $h2                     |
+# |    | 10.1.1.101/24        |                |    | 10.1.2.101/24           |
+# |    | default via 10.1.1.1 |                |    | default via 10.1.2.1    |
+# +----|----------------------+                +----|-------------------------+
+#      |                                            |
+# +----|--------------------------------------------|-------------------------+
+# | SW |                                            |                         |
+# | +--|--------------------------------------------|-----------------------+ |
+# | |  + $swp1                         br1          + $swp2                 | |
+# | |     vid 10 pvid untagged                         vid 20 pvid untagged | |
+# | |                                                                       | |
+# | |  + vx10                                       + vx20                  | |
+# | |    local 10.0.0.1                               local 10.0.0.1        | |
+# | |    remote 10.0.0.2                              remote 10.0.0.2       | |
+# | |    id 1000                                      id 2000               | |
+# | |    dstport 4789                                 dstport 4789          | |
+# | |    vid 10 pvid untagged                         vid 20 pvid untagged  | |
+# | |                                                                       | |
+# | +-----------------------------------+-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------|-----------------------------------+ |
+# | |                                   |                                   | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10                                                   vlan20 +  | |
+# | |  | 10.1.1.11/24                                       10.1.2.11/24 |  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |    10.1.1.1/24                                         10.1.2.1/24    | |
+# | |    00:00:5e:00:01:01                             00:00:5e:00:01:01    | |
+# | |                               vrf-green                               | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |    + $rp1                                       +lo                       |
+# |    | 192.0.2.1/24                                10.0.0.1/32              |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                            vrf-spine                   |
+# |    + $rp2                                                   |
+# |      192.0.2.2/24                                           |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |                                                             |
+# |    + v1 (veth)                                              |
+# |    | 192.0.3.2/24                                           |
+# +----|--------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# |    + v2 (veth)                                  +lo           NS1 (netns) |
+# |      192.0.3.1/24                                10.0.0.2/32              |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                               vrf-green                               | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |  | 10.1.1.1/24                                         10.1.2.1/24 |  | |
+# | |  | 00:00:5e:00:01:01                             00:00:5e:00:01:01 |  | |
+# | |  |                                                                 |  | |
+# | |  + vlan10                                                   vlan20 +  | |
+# | |  | 10.1.1.12/24                                       10.1.2.12/24 |  | |
+# | |  |                                                                 |  | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |                                   |                                   | |
+# | +-----------------------------------|-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------+-----------------------------------+ |
+# | |                                                                       | |
+# | |  + vx10                                     + vx20                    | |
+# | |    local 10.0.0.2                             local 10.0.0.2          | |
+# | |    remote 10.0.0.1                            remote 10.0.0.1         | |
+# | |    id 1000                                    id 2000                 | |
+# | |    dstport 4789                               dstport 4789            | |
+# | |    vid 10 pvid untagged                       vid 20 pvid untagged    | |
+# | |                                                                       | |
+# | |  + w1 (veth)                                + w3 (veth)               | |
+# | |  | vid 10 pvid untagged          br1        | vid 20 pvid untagged    | |
+# | +--|------------------------------------------|-------------------------+ |
+# |    |                                          |                           |
+# |    |                                          |                           |
+# | +--|----------------------+                +--|-------------------------+ |
+# | |  |               vrf-h1 |                |  |                  vrf-h2 | |
+# | |  + w2 (veth)            |                |  + w4 (veth)               | |
+# | |    10.1.1.102/24        |                |    10.1.2.102/24           | |
+# | |    default via 10.1.1.1 |                |    default via 10.1.2.1    | |
+# | +-------------------------+                +----------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	arp_decap
+	arp_suppression
+"
+NUM_NETIFS=6
+source lib.sh
+
+require_command $ARPING
+
+hx_create()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	vrf_create $vrf_name
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $vrf_name up
+	ip link set dev $if_name up
+
+	ip address add $ip_addr/24 dev $if_name
+	ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
+		dev $if_name
+	ip route add default vrf $vrf_name nexthop via $gw_ip
+}
+export -f hx_create
+
+hx_destroy()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	ip route del default vrf $vrf_name nexthop via $gw_ip
+	ip neigh del $gw_ip dev $if_name
+	ip address del $ip_addr/24 dev $if_name
+
+	ip link set dev $if_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h1_destroy()
+{
+	hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h2_create()
+{
+	hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+h2_destroy()
+{
+	hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	ip address add dev $rp1 192.0.2.1/24
+	ip route add 10.0.0.2/32 nexthop via 192.0.2.2
+
+	ip link add name vx10 type vxlan id 1000		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 20 dev $swp2 pvid untagged
+
+	ip address add 10.0.0.1/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.11/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.11/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+
+switch_destroy()
+{
+	sysctl_restore net.ipv4.conf.all.rp_filter
+
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
+
+	bridge vlan del vid 20 dev br1 self
+	bridge vlan del vid 10 dev br1 self
+
+	ip link del dev vlan20
+
+	ip link del dev vlan10
+
+	vrf_destroy "vrf-green"
+
+	ip address del 10.0.0.1/32 dev lo
+
+	bridge vlan del vid 20 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	ip route del 10.0.0.2/32 nexthop via 192.0.2.2
+	ip address del dev $rp1 192.0.2.1/24
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+spine_create()
+{
+	vrf_create "vrf-spine"
+	ip link set dev $rp2 master vrf-spine
+	ip link set dev v1 master vrf-spine
+	ip link set dev vrf-spine up
+	ip link set dev $rp2 up
+	ip link set dev v1 up
+
+	ip address add 192.0.2.2/24 dev $rp2
+	ip address add 192.0.3.2/24 dev v1
+
+	ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+	ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+}
+
+spine_destroy()
+{
+	ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+	ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+
+	ip address del 192.0.3.2/24 dev v1
+	ip address del 192.0.2.2/24 dev $rp2
+
+	ip link set dev v1 down
+	ip link set dev $rp2 down
+	vrf_destroy "vrf-spine"
+}
+
+ns_h1_create()
+{
+	hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1
+}
+export -f ns_h1_create
+
+ns_h2_create()
+{
+	hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1
+}
+export -f ns_h2_create
+
+ns_switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	ip link set dev br1 up
+
+	ip link set dev v2 up
+	ip address add dev v2 192.0.3.1/24
+	ip route add 10.0.0.1/32 nexthop via 192.0.3.2
+
+	ip link add name vx10 type vxlan id 1000		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev w1 master br1
+	ip link set dev w1 up
+	bridge vlan add vid 10 dev w1 pvid untagged
+
+	ip link set dev w3 master br1
+	ip link set dev w3 up
+	bridge vlan add vid 20 dev w3 pvid untagged
+
+	ip address add 10.0.0.2/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.12/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.12/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+export -f ns_switch_create
+
+ns_init()
+{
+	ip link add name w1 type veth peer name w2
+	ip link add name w3 type veth peer name w4
+
+	ip link set dev lo up
+
+	ns_h1_create
+	ns_h2_create
+	ns_switch_create
+}
+export -f ns_init
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 ns_init
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+macs_populate()
+{
+	local mac1=$1; shift
+	local mac2=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local dst=$1; shift
+
+	bridge fdb add $mac1 dev vx10 self master extern_learn static \
+		dst $dst vlan 10
+	bridge fdb add $mac2 dev vx20 self master extern_learn static \
+		dst $dst vlan 20
+
+	ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
+		extern_learn
+	ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
+		extern_learn
+}
+export -f macs_populate
+
+macs_initialize()
+{
+	local h1_ns_mac=$(in_ns ns1 mac_get w2)
+	local h2_ns_mac=$(in_ns ns1 mac_get w4)
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	macs_populate $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2
+	in_ns ns1 macs_populate $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	spine_create
+	ns1_create
+
+	macs_initialize
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns1_destroy
+	spine_destroy
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20"
+	ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10"
+	ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20"
+	ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20"
+	ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10"
+}
+
+arp_decap()
+{
+	# Repeat the ping tests, but without populating the neighbours. This
+	# makes sure we correctly decapsulate ARP packets
+	log_info "deleting neighbours from vlan interfaces"
+
+	ip neigh del 10.1.1.102 dev vlan10
+	ip neigh del 10.1.2.102 dev vlan20
+
+	ping_ipv4
+
+	ip neigh replace 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
+		dev vlan10 extern_learn
+	ip neigh replace 10.1.2.102 lladdr $(in_ns ns1 mac_get w4) nud noarp \
+		dev vlan20 extern_learn
+}
+
+arp_suppression_compare()
+{
+	local expect=$1; shift
+	local actual=$(in_ns ns1 tc_rule_stats_get vx10 1 ingress)
+
+	(( expect == actual ))
+	check_err $? "expected $expect arps got $actual"
+}
+
+arp_suppression()
+{
+	ip link set dev vx10 type bridge_slave neigh_suppress on
+
+	in_ns ns1 tc qdisc add dev vx10 clsact
+	in_ns ns1 tc filter add dev vx10 ingress proto arp pref 1 handle 101 \
+		flower dst_mac ff:ff:ff:ff:ff:ff arp_tip 10.1.1.102 arp_op \
+		request action pass
+
+	# The neighbour is configured on the SVI and ARP suppression is on, so
+	# the ARP request should be suppressed
+	RET=0
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 0
+
+	log_test "neigh_suppress: on / neigh exists: yes"
+
+	# Delete the neighbour from the the SVI. A single ARP request should be
+	# received by the remote VTEP
+	RET=0
+
+	ip neigh del 10.1.1.102 dev vlan10
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 1
+
+	log_test "neigh_suppress: on / neigh exists: no"
+
+	# Turn off ARP suppression and make sure ARP is not suppressed,
+	# regardless of neighbour existence on the SVI
+	RET=0
+
+	ip neigh del 10.1.1.102 dev vlan10 &> /dev/null
+	ip link set dev vx10 type bridge_slave neigh_suppress off
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 2
+
+	log_test "neigh_suppress: off / neigh exists: no"
+
+	RET=0
+
+	ip neigh add 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
+		dev vlan10 extern_learn
+
+	$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
+	check_err $? "arping failed"
+
+	arp_suppression_compare 3
+
+	log_test "neigh_suppress: off / neigh exists: yes"
+
+	in_ns ns1 tc qdisc del dev vx10 clsact
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
new file mode 100755
index 000000000..0ccb1dda0
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
@@ -0,0 +1,786 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +--------------------+                               +----------------------+
+# | H1 (vrf)           |                               |             H2 (vrf) |
+# |    + $h1           |                               |  + $h2               |
+# |    | 192.0.2.1/28  |                               |  | 192.0.2.2/28      |
+# +----|---------------+                               +--|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1d)             + $swp2           | |
+# | |                                                                       | |
+# | |  + vx1 (vxlan)                                                        | |
+# | |    local 192.0.2.17                                                   | |
+# | |    remote 192.0.2.34 192.0.2.50                                       | |
+# | |    id 1000 dstport $VXPORT                                            | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  192.0.2.32/28 via 192.0.2.18                                             |
+# |  192.0.2.48/28 via 192.0.2.18                                             |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 192.0.2.17/28                                                        |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                  BR2 (802.1d) | |   | |                  BR2 (802.1d) | |
+# | |  + vx2 (vxlan)                | |   | |  + vx2 (vxlan)                | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 1000 dstport $VXPORT    | |
+# | |                               | |   | |                               | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  |                  VW2 (vrf) | |   | |  |                  VW2 (vrf) | |
+# | |  + w2 (veth)                  | |   | |  + w2 (veth)                  | |
+# | |    192.0.2.3/28               | |   | |    192.0.2.4/28               | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+	test_flood
+	test_unicast
+	test_ttl
+	test_tos
+	test_ecn_encap
+	test_ecn_decap
+	reapply_config
+	ping_ipv4
+	test_flood
+	test_unicast
+	test_learning
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+	tc qdisc add dev $h1 clsact
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 0 mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	ip link add name vx1 type vxlan id 1000		\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx1 up
+
+	ip link set dev vx1 master br1
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	ip link set dev vx1 nomaster
+	ip link set dev vx1 down
+	ip link del dev vx1
+
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+
+	ip link add name vx2 type vxlan id 1000 local $in_addr dstport "$VXPORT"
+	ip link set dev vx2 up
+	bridge fdb append dev vx2 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx2 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx2 master br2
+	tc qdisc add dev vx2 clsact
+
+	simple_if_init w2 $host_addr/28
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 192.0.2.3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 192.0.2.4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+# For the first round of tests, vx1 is the first device to get attached to the
+# bridge, and that at the point that the local IP is already configured. Try the
+# other scenario of attaching the device to an already-offloaded bridge, and
+# only then attach the local IP.
+reapply_config()
+{
+	echo "Reapplying configuration"
+
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+	rp1_unset_addr
+	ip link set dev vx1 nomaster
+	sleep 5
+
+	ip link set dev vx1 master br1
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx1 00:00:00:00:00:00 dst 192.0.2.50 self
+	sleep 1
+	rp1_set_addr
+	sleep 5
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2 ": local->local"
+	ping_test $h1 192.0.2.3 ": local->remote 1"
+	ping_test $h1 192.0.2.4 ": local->remote 2"
+}
+
+maybe_in_ns()
+{
+	echo ${1:+in_ns} $1
+}
+
+__flood_counter_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+	local ns=$1; shift
+
+	# Putting the ICMP capture both to HW and to SW will end up
+	# double-counting the packets that are trapped to slow path, such as for
+	# the unicast test. Adding either skip_hw or skip_sw fixes this problem,
+	# but with skip_hw, the flooded packets are not counted at all, because
+	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
+	# for veth-based topologies.
+	#
+	# So try to install with skip_sw and fall back to skip_sw if that fails.
+
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_sw 2>/dev/null || \
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_hw
+}
+
+flood_counter_install()
+{
+	__flood_counter_add_del add "$@"
+}
+
+flood_counter_uninstall()
+{
+	__flood_counter_add_del del "$@"
+}
+
+flood_fetch_stat()
+{
+	local dev=$1; shift
+	local ns=$1; shift
+
+	$(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
+}
+
+flood_fetch_stats()
+{
+	local counters=("${@}")
+	local counter
+
+	for counter in "${counters[@]}"; do
+		flood_fetch_stat $counter
+	done
+}
+
+vxlan_flood_test()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local -a expects=("${@}")
+
+	local -a counters=($h2 "vx2 ns1" "vx2 ns2")
+	local counter
+	local key
+
+	for counter in "${counters[@]}"; do
+		flood_counter_install $counter
+	done
+
+	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
+	$MZ $h1 -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q
+	sleep 1
+	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
+
+	for key in ${!t0s[@]}; do
+		local delta=$((t1s[$key] - t0s[$key]))
+		local expect=${expects[$key]}
+
+		((expect == delta))
+		check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
+	done
+
+	for counter in "${counters[@]}"; do
+		flood_counter_uninstall $counter
+	done
+}
+
+__test_flood()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: $what"
+}
+
+test_flood()
+{
+	__test_flood de:ad:be:ef:13:37 192.0.2.100 "flood"
+}
+
+vxlan_fdb_add_del()
+{
+	local add_del=$1; shift
+	local mac=$1; shift
+	local dev=$1; shift
+	local dst=$1; shift
+
+	bridge fdb $add_del dev $dev $mac self static permanent \
+		${dst:+dst} $dst 2>/dev/null
+	bridge fdb $add_del dev $dev $mac master static 2>/dev/null
+}
+
+__test_unicast()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local hit_idx=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	local -a expects=(0 0 0)
+	expects[$hit_idx]=10
+
+	vxlan_flood_test $mac $dst "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_unicast()
+{
+	local -a targets=("$h2_mac $h2"
+			  "$r1_mac vx1 192.0.2.34"
+			  "$r2_mac vx1 192.0.2.50")
+	local target
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add $target
+	done
+
+	__test_unicast $h2_mac 192.0.2.2 0 "local MAC unicast"
+	__test_unicast $r1_mac 192.0.2.3 1 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 192.0.2.4 2 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del $target
+	done
+}
+
+vxlan_ping_test()
+{
+	local ping_dev=$1; shift
+	local ping_dip=$1; shift
+	local ping_args=$1; shift
+	local capture_dev=$1; shift
+	local capture_dir=$1; shift
+	local capture_pref=$1; shift
+	local expect=$1; shift
+
+	local t0=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	ping_do $ping_dev $ping_dip "$ping_args"
+	local t1=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	local delta=$((t1 - t0))
+
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "$capture_dev: Expected to capture $expect packets, got $delta."
+}
+
+test_ttl()
+{
+	RET=0
+
+	tc filter add dev v1 egress pref 77 prot ip \
+		flower ip_ttl 99 action pass
+	vxlan_ping_test $h1 192.0.2.3 "" v1 egress 77 10
+	tc filter del dev v1 egress pref 77 prot ip
+
+	log_test "VXLAN: envelope TTL"
+}
+
+test_tos()
+{
+	RET=0
+
+	tc filter add dev v1 egress pref 77 prot ip \
+		flower ip_tos 0x14 action pass
+	vxlan_ping_test $h1 192.0.2.3 "-Q 0x14" v1 egress 77 10
+	vxlan_ping_test $h1 192.0.2.3 "-Q 0x18" v1 egress 77 0
+	tc filter del dev v1 egress pref 77 prot ip
+
+	log_test "VXLAN: envelope TOS inheritance"
+}
+
+__test_ecn_encap()
+{
+	local q=$1; shift
+	local tos=$1; shift
+
+	RET=0
+
+	tc filter add dev v1 egress pref 77 prot ip \
+		flower ip_tos $tos action pass
+	sleep 1
+	vxlan_ping_test $h1 192.0.2.3 "-Q $q" v1 egress 77 10
+	tc filter del dev v1 egress pref 77 prot ip
+
+	log_test "VXLAN: ECN encap: $q->$tos"
+}
+
+test_ecn_encap()
+{
+	# In accordance with INET_ECN_encapsulate()
+	__test_ecn_encap 0x00 0x00
+	__test_ecn_encap 0x01 0x01
+	__test_ecn_encap 0x02 0x02
+	__test_ecn_encap 0x03 0x02
+}
+
+vxlan_encapped_ping_do()
+{
+	local count=$1; shift
+	local dev=$1; shift
+	local next_hop_mac=$1; shift
+	local dest_ip=$1; shift
+	local dest_mac=$1; shift
+	local inner_tos=$1; shift
+	local outer_tos=$1; shift
+
+	$MZ $dev -c $count -d 100msec -q \
+		-b $next_hop_mac -B $dest_ip \
+		-t udp tos=$outer_tos,sp=23456,dp=$VXPORT,p=$(:
+		    )"08:"$(                      : VXLAN flags
+		    )"00:00:00:"$(                : VXLAN reserved
+		    )"00:03:e8:"$(                : VXLAN VNI
+		    )"00:"$(                      : VXLAN reserved
+		    )"$dest_mac:"$(               : ETH daddr
+		    )"$(mac_get w2):"$(           : ETH saddr
+		    )"08:00:"$(                   : ETH type
+		    )"45:"$(                      : IP version + IHL
+		    )"$inner_tos:"$(              : IP TOS
+		    )"00:54:"$(                   : IP total length
+		    )"99:83:"$(                   : IP identification
+		    )"40:00:"$(                   : IP flags + frag off
+		    )"40:"$(                      : IP TTL
+		    )"01:"$(                      : IP proto
+		    )"00:00:"$(                   : IP header csum
+		    )"c0:00:02:03:"$(             : IP saddr: 192.0.2.3
+		    )"c0:00:02:01:"$(             : IP daddr: 192.0.2.1
+		    )"08:"$(                      : ICMP type
+		    )"00:"$(                      : ICMP code
+		    )"8b:f2:"$(                   : ICMP csum
+		    )"1f:6a:"$(                   : ICMP request identifier
+		    )"00:01:"$(                   : ICMP request sequence number
+		    )"4f:ff:c5:5b:00:00:00:00:"$( : ICMP payload
+		    )"6d:74:0b:00:00:00:00:00:"$( :
+		    )"10:11:12:13:14:15:16:17:"$( :
+		    )"18:19:1a:1b:1c:1d:1e:1f:"$( :
+		    )"20:21:22:23:24:25:26:27:"$( :
+		    )"28:29:2a:2b:2c:2d:2e:2f:"$( :
+		    )"30:31:32:33:34:35:36:37"
+}
+export -f vxlan_encapped_ping_do
+
+vxlan_encapped_ping_test()
+{
+	local ping_dev=$1; shift
+	local nh_dev=$1; shift
+	local ping_dip=$1; shift
+	local inner_tos=$1; shift
+	local outer_tos=$1; shift
+	local stat_get=$1; shift
+	local expect=$1; shift
+
+	local t0=$($stat_get)
+
+	in_ns ns1 \
+		vxlan_encapped_ping_do 10 $ping_dev $(mac_get $nh_dev) \
+			$ping_dip $(mac_get $h1) \
+			$inner_tos $outer_tos
+
+	local t1=$($stat_get)
+	local delta=$((t1 - t0))
+
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "Expected to capture $expect packets, got $delta."
+}
+export -f vxlan_encapped_ping_test
+
+__test_ecn_decap()
+{
+	local orig_inner_tos=$1; shift
+	local orig_outer_tos=$1; shift
+	local decapped_tos=$1; shift
+
+	RET=0
+
+	tc filter add dev $h1 ingress pref 77 prot ip \
+		flower ip_tos $decapped_tos action drop
+	sleep 1
+	vxlan_encapped_ping_test v2 v1 192.0.2.17 \
+				 $orig_inner_tos $orig_outer_tos \
+				 "tc_rule_stats_get $h1 77 ingress" 10
+	tc filter del dev $h1 ingress pref 77
+
+	log_test "VXLAN: ECN decap: $orig_outer_tos/$orig_inner_tos->$decapped_tos"
+}
+
+test_ecn_decap_error()
+{
+	local orig_inner_tos=00
+	local orig_outer_tos=03
+
+	RET=0
+
+	vxlan_encapped_ping_test v2 v1 192.0.2.17 \
+				 $orig_inner_tos $orig_outer_tos \
+				 "link_stats_rx_errors_get vx1" 10
+
+	log_test "VXLAN: ECN decap: $orig_outer_tos/$orig_inner_tos->error"
+}
+
+test_ecn_decap()
+{
+	# In accordance with INET_ECN_decapsulate()
+	__test_ecn_decap 00 00 0x00
+	__test_ecn_decap 01 01 0x01
+	__test_ecn_decap 02 01 0x01
+	__test_ecn_decap 01 03 0x03
+	__test_ecn_decap 02 03 0x03
+	test_ecn_decap_error
+}
+
+test_learning()
+{
+	local mac=de:ad:be:ef:13:37
+	local dst=192.0.2.100
+
+	# Enable learning on the VxLAN device and set ageing time to 10 seconds
+	ip link set dev br1 type bridge ageing_time 1000
+	ip link set dev vx1 type vxlan ageing 10
+	ip link set dev vx1 type vxlan learning
+	reapply_config
+
+	# Check that flooding works
+	RET=0
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: flood before learning"
+
+	# Send a packet with source mac set to $mac from host w2 and check that
+	# a corresponding entry is created in VxLAN device vx1
+	RET=0
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: show learned FDB entry"
+
+	# Repeat first test and check that packets only reach host w2 in ns1
+	RET=0
+
+	vxlan_flood_test $mac $dst 0 10 0
+
+	log_test "VXLAN: learned FDB entry"
+
+	# Delete the learned FDB entry from the VxLAN and bridge devices and
+	# check that packets are flooded
+	RET=0
+
+	bridge fdb del dev vx1 $mac master self
+	sleep 1
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: deletion of learned FDB entry"
+
+	# Re-learn the first FDB entry and check that it is correctly aged-out
+	RET=0
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	vxlan_flood_test $mac $dst 0 10 0
+
+	sleep 20
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_fail $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_fail $?
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: Ageing of learned FDB entry"
+
+	# Toggle learning on the bridge port and check that the bridge's FDB
+	# is populated only when it should
+	RET=0
+
+	ip link set dev vx1 type bridge_slave learning off
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_fail $?
+
+	ip link set dev vx1 type bridge_slave learning on
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: learning toggling on bridge port"
+
+	# Restore previous settings
+	ip link set dev vx1 type vxlan nolearning
+	ip link set dev vx1 type vxlan ageing 300
+	ip link set dev br1 type bridge ageing_time 30000
+	reapply_config
+}
+
+test_all()
+{
+	echo "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472.sh
new file mode 100755
index 000000000..3bf3da691
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_port_8472.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A wrapper to run VXLAN tests with an unusual port number.
+
+VXPORT=8472
+ALL_TESTS="
+	ping_ipv4
+"
+source vxlan_bridge_1d.sh
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh
new file mode 100755
index 000000000..a5789721b
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q.sh
@@ -0,0 +1,860 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+                          +------------------------+
+# | H1 (vrf)              |                          | H2 (vrf)               |
+# |  + $h1.10             |                          |  + $h2.10              |
+# |  | 192.0.2.1/28       |                          |  | 192.0.2.2/28        |
+# |  |                    |                          |  |                     |
+# |  | + $h1.20           |                          |  | + $h2.20            |
+# |  \ | 198.51.100.1/24  |                          |  \ | 198.51.100.2/24   |
+# |   \|                  |                          |   \|                   |
+# |    + $h1              |                          |    + $h2               |
+# +----|------------------+                          +----|-------------------+
+#      |                                                  |
+# +----|--------------------------------------------------|-------------------+
+# | SW |                                                  |                   |
+# | +--|--------------------------------------------------|-----------------+ |
+# | |  + $swp1                   BR1 (802.1q)             + $swp2           | |
+# | |     vid 10                                             vid 10         | |
+# | |     vid 20                                             vid 20         | |
+# | |                                                                       | |
+# | |  + vx10 (vxlan)                        + vx20 (vxlan)                 | |
+# | |    local 192.0.2.17                      local 192.0.2.17             | |
+# | |    remote 192.0.2.34 192.0.2.50          remote 192.0.2.34 192.0.2.50 | |
+# | |    id 1000 dstport $VXPORT               id 2000 dstport $VXPORT      | |
+# | |    vid 10 pvid untagged                  vid 20 pvid untagged         | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  192.0.2.32/28 via 192.0.2.18                                             |
+# |  192.0.2.48/28 via 192.0.2.18                                             |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 192.0.2.17/28                                                        |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                             VRP2 (vrf) |
+# |    + $rp2                                                   |
+# |      192.0.2.18/28                                          |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |    + v1 (veth)                             + v3 (veth)      |
+# |    | 192.0.2.33/28                         | 192.0.2.49/28  |
+# +----|---------------------------------------|----------------+
+#      |                                       |
+# +----|------------------------------+   +----|------------------------------+
+# |    + v2 (veth)        NS1 (netns) |   |    + v4 (veth)        NS2 (netns) |
+# |      192.0.2.34/28                |   |      192.0.2.50/28                |
+# |                                   |   |                                   |
+# |   192.0.2.16/28 via 192.0.2.33    |   |   192.0.2.16/28 via 192.0.2.49    |
+# |   192.0.2.50/32 via 192.0.2.33    |   |   192.0.2.34/32 via 192.0.2.49    |
+# |                                   |   |                                   |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# | |                  BR2 (802.1q) | |   | |                  BR2 (802.1q) | |
+# | |  + vx10 (vxlan)               | |   | |  + vx10 (vxlan)               | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 1000 dstport $VXPORT    | |   | |    id 1000 dstport $VXPORT    | |
+# | |    vid 10 pvid untagged       | |   | |    vid 10 pvid untagged       | |
+# | |                               | |   | |                               | |
+# | |  + vx20 (vxlan)               | |   | |  + vx20 (vxlan)               | |
+# | |    local 192.0.2.34           | |   | |    local 192.0.2.50           | |
+# | |    remote 192.0.2.17          | |   | |    remote 192.0.2.17          | |
+# | |    remote 192.0.2.50          | |   | |    remote 192.0.2.34          | |
+# | |    id 2000 dstport $VXPORT    | |   | |    id 2000 dstport $VXPORT    | |
+# | |    vid 20 pvid untagged       | |   | |    vid 20 pvid untagged       | |
+# | |                               | |   | |                               | |
+# | |  + w1 (veth)                  | |   | |  + w1 (veth)                  | |
+# | |  | vid 10                     | |   | |  | vid 10                     | |
+# | |  | vid 20                     | |   | |  | vid 20                     | |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# |    |                              |   |    |                              |
+# | +--|----------------------------+ |   | +--|----------------------------+ |
+# | |  + w2 (veth)        VW2 (vrf) | |   | |  + w2 (veth)        VW2 (vrf) | |
+# | |  |\                           | |   | |  |\                           | |
+# | |  | + w2.10                    | |   | |  | + w2.10                    | |
+# | |  |   192.0.2.3/28             | |   | |  |   192.0.2.4/28             | |
+# | |  |                            | |   | |  |                            | |
+# | |  + w2.20                      | |   | |  + w2.20                      | |
+# | |    198.51.100.3/24            | |   | |    198.51.100.4/24            | |
+# | +-------------------------------+ |   | +-------------------------------+ |
+# +-----------------------------------+   +-----------------------------------+
+
+: ${VXPORT:=4789}
+export VXPORT
+
+: ${ALL_TESTS:="
+	ping_ipv4
+	test_flood
+	test_unicast
+	reapply_config
+	ping_ipv4
+	test_flood
+	test_unicast
+	test_learning
+	test_pvid
+    "}
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+	vlan_create $h1 10 v$h1 192.0.2.1/28
+	vlan_create $h1 20 v$h1 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	vlan_destroy $h1 20
+	vlan_destroy $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+	vlan_create $h2 10 v$h2 192.0.2.2/28
+	vlan_create $h2 20 v$h2 198.51.100.2/24
+}
+
+h2_destroy()
+{
+	vlan_destroy $h2 20
+	vlan_destroy $h2 10
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+rp1_set_addr()
+{
+	ip address add dev $rp1 192.0.2.17/28
+
+	ip route add 192.0.2.32/28 nexthop via 192.0.2.18
+	ip route add 192.0.2.48/28 nexthop via 192.0.2.18
+}
+
+rp1_unset_addr()
+{
+	ip route del 192.0.2.48/28 nexthop via 192.0.2.18
+	ip route del 192.0.2.32/28 nexthop via 192.0.2.18
+
+	ip address del dev $rp1 192.0.2.17/28
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	rp1_set_addr
+
+	ip link add name vx10 type vxlan id 1000	\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000	\
+		local 192.0.2.17 dstport "$VXPORT"	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan add vid 20 dev $swp1
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 10 dev $swp2
+	bridge vlan add vid 20 dev $swp2
+
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+}
+
+switch_destroy()
+{
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge vlan del vid 20 dev $swp2
+	bridge vlan del vid 10 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 20 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	rp1_unset_addr
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+vrp2_create()
+{
+	simple_if_init $rp2 192.0.2.18/28
+	__simple_if_init v1 v$rp2 192.0.2.33/28
+	__simple_if_init v3 v$rp2 192.0.2.49/28
+	tc qdisc add dev v1 clsact
+}
+
+vrp2_destroy()
+{
+	tc qdisc del dev v1 clsact
+	__simple_if_fini v3 192.0.2.49/28
+	__simple_if_fini v1 192.0.2.33/28
+	simple_if_fini $rp2 192.0.2.18/28
+}
+
+ns_init_common()
+{
+	local in_if=$1; shift
+	local in_addr=$1; shift
+	local other_in_addr=$1; shift
+	local nh_addr=$1; shift
+	local host_addr1=$1; shift
+	local host_addr2=$1; shift
+
+	ip link set dev $in_if up
+	ip address add dev $in_if $in_addr/28
+	tc qdisc add dev $in_if clsact
+
+	ip link add name br2 type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set dev br2 up
+
+	ip link add name w1 type veth peer name w2
+
+	ip link set dev w1 master br2
+	ip link set dev w1 up
+
+	bridge vlan add vid 10 dev w1
+	bridge vlan add vid 20 dev w1
+
+	ip link add name vx10 type vxlan id 1000 local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev vx10 up
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx10 master br2
+	tc qdisc add dev vx10 clsact
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 2000 local $in_addr \
+		dstport "$VXPORT"
+	ip link set dev vx20 up
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.17 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst $other_in_addr self
+
+	ip link set dev vx20 master br2
+	tc qdisc add dev vx20 clsact
+
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	simple_if_init w2
+        vlan_create w2 10 vw2 $host_addr1/28
+        vlan_create w2 20 vw2 $host_addr2/24
+
+	ip route add 192.0.2.16/28 nexthop via $nh_addr
+	ip route add $other_in_addr/32 nexthop via $nh_addr
+}
+export -f ns_init_common
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 \
+	      ns_init_common v2 192.0.2.34 192.0.2.50 192.0.2.33 192.0.2.3 \
+	      198.51.100.3
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+ns2_create()
+{
+	ip netns add ns2
+	ip link set dev v4 netns ns2
+	in_ns ns2 \
+	      ns_init_common v4 192.0.2.50 192.0.2.34 192.0.2.49 192.0.2.4 \
+	      198.51.100.4
+}
+
+ns2_destroy()
+{
+	ip netns exec ns2 ip link set dev v4 netns 1
+	ip netns del ns2
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	ip link add name v3 type veth peer name v4
+	vrp2_create
+	ns1_create
+	ns2_create
+
+	r1_mac=$(in_ns ns1 mac_get w2)
+	r2_mac=$(in_ns ns2 mac_get w2)
+	h2_mac=$(mac_get $h2)
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns2_destroy
+	ns1_destroy
+	vrp2_destroy
+	ip link del dev v3
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+# For the first round of tests, vx10 and vx20 were the first devices to get
+# attached to the bridge, and that at the point that the local IP is already
+# configured. Try the other scenario of attaching these devices to a bridge
+# that already has local ports members, and only then assign the local IP.
+reapply_config()
+{
+	log_info "Reapplying configuration"
+
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+	bridge fdb del dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+
+	ip link set dev vx20 nomaster
+	ip link set dev vx10 nomaster
+
+	rp1_unset_addr
+	sleep 5
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx10 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.34 self
+	bridge fdb append dev vx20 00:00:00:00:00:00 dst 192.0.2.50 self
+
+	rp1_set_addr
+	sleep 5
+}
+
+ping_ipv4()
+{
+	ping_test $h1.10 192.0.2.2 ": local->local vid 10"
+	ping_test $h1.20 198.51.100.2 ": local->local vid 20"
+	ping_test $h1.10 192.0.2.3 ": local->remote 1 vid 10"
+	ping_test $h1.10 192.0.2.4 ": local->remote 2 vid 10"
+	ping_test $h1.20 198.51.100.3 ": local->remote 1 vid 20"
+	ping_test $h1.20 198.51.100.4 ": local->remote 2 vid 20"
+}
+
+maybe_in_ns()
+{
+	echo ${1:+in_ns} $1
+}
+
+__flood_counter_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+	local ns=$1; shift
+
+	# Putting the ICMP capture both to HW and to SW will end up
+	# double-counting the packets that are trapped to slow path, such as for
+	# the unicast test. Adding either skip_hw or skip_sw fixes this problem,
+	# but with skip_hw, the flooded packets are not counted at all, because
+	# those are dropped due to MAC address mismatch; and skip_sw is a no-go
+	# for veth-based topologies.
+	#
+	# So try to install with skip_sw and fall back to skip_sw if that fails.
+
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_sw 2>/dev/null || \
+	$(maybe_in_ns $ns) __icmp_capture_add_del          \
+			   $add_del 100 "" $dev skip_hw
+}
+
+flood_counter_install()
+{
+	__flood_counter_add_del add "$@"
+}
+
+flood_counter_uninstall()
+{
+	__flood_counter_add_del del "$@"
+}
+
+flood_fetch_stat()
+{
+	local dev=$1; shift
+	local ns=$1; shift
+
+	$(maybe_in_ns $ns) tc_rule_stats_get $dev 100 ingress
+}
+
+flood_fetch_stats()
+{
+	local counters=("${@}")
+	local counter
+
+	for counter in "${counters[@]}"; do
+		flood_fetch_stat $counter
+	done
+}
+
+vxlan_flood_test()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local -a expects=("${@}")
+
+	local -a counters=($h2 "vx10 ns1" "vx20 ns1" "vx10 ns2" "vx20 ns2")
+	local counter
+	local key
+
+	# Packets reach the local host tagged whereas they reach the VxLAN
+	# devices untagged. In order to be able to use the same filter for
+	# all counters, make sure the packets also reach the local host
+	# untagged
+	bridge vlan add vid $vid dev $swp2 untagged
+	for counter in "${counters[@]}"; do
+		flood_counter_install $counter
+	done
+
+	local -a t0s=($(flood_fetch_stats "${counters[@]}"))
+	$MZ $h1 -Q $vid -c 10 -d 100msec -p 64 -b $mac -B $dst -t icmp -q
+	sleep 1
+	local -a t1s=($(flood_fetch_stats "${counters[@]}"))
+
+	for key in ${!t0s[@]}; do
+		local delta=$((t1s[$key] - t0s[$key]))
+		local expect=${expects[$key]}
+
+		((expect == delta))
+		check_err $? "${counters[$key]}: Expected to capture $expect packets, got $delta."
+	done
+
+	for counter in "${counters[@]}"; do
+		flood_counter_uninstall $counter
+	done
+	bridge vlan add vid $vid dev $swp2
+}
+
+__test_flood()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local what=$1; shift
+	local -a expects=("${@}")
+
+	RET=0
+
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_flood()
+{
+	__test_flood de:ad:be:ef:13:37 192.0.2.100 10 "flood vlan 10" \
+		10 10 0 10 0
+	__test_flood ca:fe:be:ef:13:37 198.51.100.100 20 "flood vlan 20" \
+		10 0 10 0 10
+}
+
+vxlan_fdb_add_del()
+{
+	local add_del=$1; shift
+	local vid=$1; shift
+	local mac=$1; shift
+	local dev=$1; shift
+	local dst=$1; shift
+
+	bridge fdb $add_del dev $dev $mac self static permanent \
+		${dst:+dst} $dst 2>/dev/null
+	bridge fdb $add_del dev $dev $mac master static vlan $vid 2>/dev/null
+}
+
+__test_unicast()
+{
+	local mac=$1; shift
+	local dst=$1; shift
+	local hit_idx=$1; shift
+	local vid=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	local -a expects=(0 0 0 0 0)
+	expects[$hit_idx]=10
+
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: $what"
+}
+
+test_unicast()
+{
+	local -a targets=("$h2_mac $h2"
+			  "$r1_mac vx10 192.0.2.34"
+			  "$r2_mac vx10 192.0.2.50")
+	local target
+
+	log_info "unicast vlan 10"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add 10 $target
+	done
+
+	__test_unicast $h2_mac 192.0.2.2 0 10 "local MAC unicast"
+	__test_unicast $r1_mac 192.0.2.3 1 10 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 192.0.2.4 3 10 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del 10 $target
+	done
+
+	log_info "unicast vlan 20"
+
+	targets=("$h2_mac $h2" "$r1_mac vx20 192.0.2.34" \
+		 "$r2_mac vx20 192.0.2.50")
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del add 20 $target
+	done
+
+	__test_unicast $h2_mac 198.51.100.2 0 20 "local MAC unicast"
+	__test_unicast $r1_mac 198.51.100.3 2 20 "remote MAC 1 unicast"
+	__test_unicast $r2_mac 198.51.100.4 4 20 "remote MAC 2 unicast"
+
+	for target in "${targets[@]}"; do
+		vxlan_fdb_add_del del 20 $target
+	done
+}
+
+test_pvid()
+{
+	local -a expects=(0 0 0 0 0)
+	local mac=de:ad:be:ef:13:37
+	local dst=192.0.2.100
+	local vid=10
+
+	# Check that flooding works
+	RET=0
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood before pvid off"
+
+	# Toggle PVID off and test that flood to remote hosts does not work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10
+
+	expects[0]=10; expects[1]=0; expects[3]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after pvid off"
+
+	# Toggle PVID on and test that flood to remote hosts does work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after pvid on"
+
+	# Add a new VLAN and test that it does not affect flooding
+	RET=0
+
+	bridge vlan add vid 30 dev vx10
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	bridge vlan del vid 30 dev vx10
+
+	log_test "VXLAN: flood after vlan add"
+
+	# Remove currently mapped VLAN and test that flood to remote hosts does
+	# not work
+	RET=0
+
+	bridge vlan del vid 10 dev vx10
+
+	expects[0]=10; expects[1]=0; expects[3]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after vlan delete"
+
+	# Re-add the VLAN and test that flood to remote hosts does work
+	RET=0
+
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	expects[0]=10; expects[1]=10; expects[3]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood after vlan re-add"
+}
+
+vxlan_ping_test()
+{
+	local ping_dev=$1; shift
+	local ping_dip=$1; shift
+	local ping_args=$1; shift
+	local capture_dev=$1; shift
+	local capture_dir=$1; shift
+	local capture_pref=$1; shift
+	local expect=$1; shift
+
+	local t0=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	ping_do $ping_dev $ping_dip "$ping_args"
+	local t1=$(tc_rule_stats_get $capture_dev $capture_pref $capture_dir)
+	local delta=$((t1 - t0))
+
+	# Tolerate a couple stray extra packets.
+	((expect <= delta && delta <= expect + 2))
+	check_err $? "$capture_dev: Expected to capture $expect packets, got $delta."
+}
+
+__test_learning()
+{
+	local -a expects=(0 0 0 0 0)
+	local mac=$1; shift
+	local dst=$1; shift
+	local vid=$1; shift
+	local idx1=$1; shift
+	local idx2=$1; shift
+	local vx=vx$vid
+
+	# Check that flooding works
+	RET=0
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: flood before learning"
+
+	# Send a packet with source mac set to $mac from host w2 and check that
+	# a corresponding entry is created in the VxLAN device
+	RET=0
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: show learned FDB entry"
+
+	# Repeat first test and check that packets only reach host w2 in ns1
+	RET=0
+
+	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: learned FDB entry"
+
+	# Delete the learned FDB entry from the VxLAN and bridge devices and
+	# check that packets are flooded
+	RET=0
+
+	bridge fdb del dev $vx $mac master self vlan $vid
+	sleep 1
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: deletion of learned FDB entry"
+
+	# Re-learn the first FDB entry and check that it is correctly aged-out
+	RET=0
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	expects[0]=0; expects[$idx1]=10; expects[$idx2]=0
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	sleep 20
+
+	bridge fdb show brport $vx | grep $mac | grep -q self
+	check_fail $?
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_fail $?
+
+	expects[0]=10; expects[$idx1]=10; expects[$idx2]=10
+	vxlan_flood_test $mac $dst $vid "${expects[@]}"
+
+	log_test "VXLAN: Ageing of learned FDB entry"
+
+	# Toggle learning on the bridge port and check that the bridge's FDB
+	# is populated only when it should
+	RET=0
+
+	ip link set dev $vx type bridge_slave learning off
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_fail $?
+
+	ip link set dev $vx type bridge_slave learning on
+
+	in_ns ns1 $MZ w2 -Q $vid -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff \
+		-B $dst -t icmp -q
+	sleep 1
+
+	bridge fdb show brport $vx | grep $mac | grep "vlan $vid" \
+		| grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: learning toggling on bridge port"
+}
+
+test_learning()
+{
+	local mac=de:ad:be:ef:13:37
+	local dst=192.0.2.100
+	local vid=10
+
+	# Enable learning on the VxLAN devices and set ageing time to 10 seconds
+	ip link set dev br1 type bridge ageing_time 1000
+	ip link set dev vx10 type vxlan ageing 10
+	ip link set dev vx10 type vxlan learning
+	ip link set dev vx20 type vxlan ageing 10
+	ip link set dev vx20 type vxlan learning
+	reapply_config
+
+	log_info "learning vlan 10"
+
+	__test_learning $mac $dst $vid 1 3
+
+	log_info "learning vlan 20"
+
+	mac=ca:fe:be:ef:13:37
+	dst=198.51.100.100
+	vid=20
+
+	__test_learning $mac $dst $vid 2 4
+
+	# Restore previous settings
+	ip link set dev vx20 type vxlan nolearning
+	ip link set dev vx20 type vxlan ageing 300
+	ip link set dev vx10 type vxlan nolearning
+	ip link set dev vx10 type vxlan ageing 300
+	ip link set dev br1 type bridge ageing_time 30000
+	reapply_config
+}
+
+test_all()
+{
+	log_info "Running tests with UDP port $VXPORT"
+	tests_run
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+test_all
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh
new file mode 100755
index 000000000..b1b2d1a31
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_port_8472.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# A wrapper to run VXLAN tests with an unusual port number.
+
+VXPORT=8472
+ALL_TESTS="
+	ping_ipv4
+"
+source vxlan_bridge_1q.sh
diff --git a/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
new file mode 100755
index 000000000..5d97fa347
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/vxlan_symmetric.sh
@@ -0,0 +1,561 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +---------------------------+                +------------------------------+
+# |                    vrf-h1 |                |                       vrf-h2 |
+# |    + $h1                  |                |    + $h2                     |
+# |    | 10.1.1.101/24        |                |    | 10.1.2.101/24           |
+# |    | default via 10.1.1.1 |                |    | default via 10.1.2.1    |
+# +----|----------------------+                +----|-------------------------+
+#      |                                            |
+# +----|--------------------------------------------|-------------------------+
+# | SW |                                            |                         |
+# | +--|--------------------------------------------|-----------------------+ |
+# | |  + $swp1                         br1          + $swp2                 | |
+# | |     vid 10 pvid untagged                         vid 20 pvid untagged | |
+# | |                                                                       | |
+# | |  + vx10                                       + vx20                  | |
+# | |    local 10.0.0.1                               local 10.0.0.1        | |
+# | |    remote 10.0.0.2                              remote 10.0.0.2       | |
+# | |    id 1010                                      id 1020               | |
+# | |    dstport 4789                                 dstport 4789          | |
+# | |    vid 10 pvid untagged                         vid 20 pvid untagged  | |
+# | |                                                                       | |
+# | |                             + vx4001                                  | |
+# | |                               local 10.0.0.1                          | |
+# | |                               remote 10.0.0.2                         | |
+# | |                               id 104001                               | |
+# | |                               dstport 4789                            | |
+# | |                               vid 4001 pvid untagged                  | |
+# | |                                                                       | |
+# | +-----------------------------------+-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------|-----------------------------------+ |
+# | |                                   |                                   | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |  |                                |                                |  | |
+# | |  + vlan10                         |                         vlan20 +  | |
+# | |  | 10.1.1.11/24                   |                   10.1.2.11/24 |  | |
+# | |  |                                |                                |  | |
+# | |  + vlan10-v (macvlan)             +             vlan20-v (macvlan) +  | |
+# | |    10.1.1.1/24                vlan4001                 10.1.2.1/24    | |
+# | |    00:00:5e:00:01:01                             00:00:5e:00:01:01    | |
+# | |                               vrf-green                               | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |    + $rp1                                       +lo                       |
+# |    | 192.0.2.1/24                                10.0.0.1/32              |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                            vrf-spine                   |
+# |    + $rp2                                                   |
+# |      192.0.2.2/24                                           |
+# |                                                             |   (maybe) HW
+# =============================================================================
+# |                                                             |  (likely) SW
+# |                                                             |
+# |    + v1 (veth)                                              |
+# |    | 192.0.3.2/24                                           |
+# +----|--------------------------------------------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# |    + v2 (veth)                                  +lo           NS1 (netns) |
+# |      192.0.3.1/24                                10.0.0.2/32              |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                               vrf-green                               | |
+# | |  + vlan10-v (macvlan)                           vlan20-v (macvlan) +  | |
+# | |  | 10.1.1.1/24                                         10.1.2.1/24 |  | |
+# | |  | 00:00:5e:00:01:01                             00:00:5e:00:01:01 |  | |
+# | |  |                            vlan4001                             |  | |
+# | |  + vlan10                         +                         vlan20 +  | |
+# | |  | 10.1.1.12/24                   |                   10.1.2.12/24 |  | |
+# | |  |                                |                                |  | |
+# | |  +--------------------------------+--------------------------------+  | |
+# | |                                   |                                   | |
+# | +-----------------------------------|-----------------------------------+ |
+# |                                     |                                     |
+# | +-----------------------------------+-----------------------------------+ |
+# | |                                                                       | |
+# | |  + vx10                                     + vx20                    | |
+# | |    local 10.0.0.2                             local 10.0.0.2          | |
+# | |    remote 10.0.0.1                            remote 10.0.0.1         | |
+# | |    id 1010                                    id 1020                 | |
+# | |    dstport 4789                               dstport 4789            | |
+# | |    vid 10 pvid untagged                       vid 20 pvid untagged    | |
+# | |                                                                       | |
+# | |                             + vx4001                                  | |
+# | |                               local 10.0.0.2                          | |
+# | |                               remote 10.0.0.1                         | |
+# | |                               id 104001                               | |
+# | |                               dstport 4789                            | |
+# | |                               vid 4001 pvid untagged                  | |
+# | |                                                                       | |
+# | |  + w1 (veth)                                + w3 (veth)               | |
+# | |  | vid 10 pvid untagged          br1        | vid 20 pvid untagged    | |
+# | +--|------------------------------------------|-------------------------+ |
+# |    |                                          |                           |
+# |    |                                          |                           |
+# | +--|----------------------+                +--|-------------------------+ |
+# | |  |               vrf-h1 |                |  |                  vrf-h2 | |
+# | |  + w2 (veth)            |                |  + w4 (veth)               | |
+# | |    10.1.1.102/24        |                |    10.1.2.102/24           | |
+# | |    default via 10.1.1.1 |                |    default via 10.1.2.1    | |
+# | +-------------------------+                +----------------------------+ |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+"
+NUM_NETIFS=6
+source lib.sh
+
+hx_create()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	vrf_create $vrf_name
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $vrf_name up
+	ip link set dev $if_name up
+
+	ip address add $ip_addr/24 dev $if_name
+	ip neigh replace $gw_ip lladdr 00:00:5e:00:01:01 nud permanent \
+		dev $if_name
+	ip route add default vrf $vrf_name nexthop via $gw_ip
+}
+export -f hx_create
+
+hx_destroy()
+{
+	local vrf_name=$1; shift
+	local if_name=$1; shift
+	local ip_addr=$1; shift
+	local gw_ip=$1; shift
+
+	ip route del default vrf $vrf_name nexthop via $gw_ip
+	ip neigh del $gw_ip dev $if_name
+	ip address del $ip_addr/24 dev $if_name
+
+	ip link set dev $if_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	hx_create "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h1_destroy()
+{
+	hx_destroy "vrf-h1" $h1 10.1.1.101 10.1.1.1
+}
+
+h2_create()
+{
+	hx_create "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+h2_destroy()
+{
+	hx_destroy "vrf-h2" $h2 10.1.2.101 10.1.2.1
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	# Make sure the bridge uses the MAC address of the local port and not
+	# that of the VxLAN's device.
+	ip link set dev br1 address $(mac_get $swp1)
+	ip link set dev br1 up
+
+	ip link set dev $rp1 up
+	ip address add dev $rp1 192.0.2.1/24
+	ip route add 10.0.0.2/32 nexthop via 192.0.2.2
+
+	ip link add name vx10 type vxlan id 1010		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 1020		\
+		local 10.0.0.1 remote 10.0.0.2 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	bridge vlan add vid 10 dev $swp1 pvid untagged
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+	bridge vlan add vid 20 dev $swp2 pvid untagged
+
+	ip link add name vx4001 type vxlan id 104001		\
+		local 10.0.0.1 dstport 4789			\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx4001 up
+
+	ip link set dev vx4001 master br1
+	bridge vlan add vid 4001 dev vx4001 pvid untagged
+
+	ip address add 10.0.0.1/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.11/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.11/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	ip link add link br1 name vlan4001 up master vrf-green \
+		type vlan id 4001
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+	bridge vlan add vid 4001 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+
+switch_destroy()
+{
+	sysctl_restore net.ipv4.conf.all.rp_filter
+
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 20
+	bridge fdb del 00:00:5e:00:01:01 dev br1 self local vlan 10
+
+	bridge vlan del vid 4001 dev br1 self
+	bridge vlan del vid 20 dev br1 self
+	bridge vlan del vid 10 dev br1 self
+
+	ip link del dev vlan4001
+
+	ip link del dev vlan20
+
+	ip link del dev vlan10
+
+	vrf_destroy "vrf-green"
+
+	ip address del 10.0.0.1/32 dev lo
+
+	bridge vlan del vid 20 dev $swp2
+	ip link set dev $swp2 down
+	ip link set dev $swp2 nomaster
+
+	bridge vlan del vid 10 dev $swp1
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	bridge vlan del vid 4001 dev vx4001
+	ip link set dev vx4001 nomaster
+
+	ip link set dev vx4001 down
+	ip link del dev vx4001
+
+	bridge vlan del vid 20 dev vx20
+	ip link set dev vx20 nomaster
+
+	ip link set dev vx20 down
+	ip link del dev vx20
+
+	bridge vlan del vid 10 dev vx10
+	ip link set dev vx10 nomaster
+
+	ip link set dev vx10 down
+	ip link del dev vx10
+
+	ip route del 10.0.0.2/32 nexthop via 192.0.2.2
+	ip address del dev $rp1 192.0.2.1/24
+	ip link set dev $rp1 down
+
+	ip link set dev br1 down
+	ip link del dev br1
+}
+
+spine_create()
+{
+	vrf_create "vrf-spine"
+	ip link set dev $rp2 master vrf-spine
+	ip link set dev v1 master vrf-spine
+	ip link set dev vrf-spine up
+	ip link set dev $rp2 up
+	ip link set dev v1 up
+
+	ip address add 192.0.2.2/24 dev $rp2
+	ip address add 192.0.3.2/24 dev v1
+
+	ip route add 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+	ip route add 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+}
+
+spine_destroy()
+{
+	ip route del 10.0.0.2/32 vrf vrf-spine nexthop via 192.0.3.1
+	ip route del 10.0.0.1/32 vrf vrf-spine nexthop via 192.0.2.1
+
+	ip address del 192.0.3.2/24 dev v1
+	ip address del 192.0.2.2/24 dev $rp2
+
+	ip link set dev v1 down
+	ip link set dev $rp2 down
+	vrf_destroy "vrf-spine"
+}
+
+ns_h1_create()
+{
+	hx_create "vrf-h1" w2 10.1.1.102 10.1.1.1
+}
+export -f ns_h1_create
+
+ns_h2_create()
+{
+	hx_create "vrf-h2" w4 10.1.2.102 10.1.2.1
+}
+export -f ns_h2_create
+
+ns_switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1 vlan_default_pvid 0 \
+		mcast_snooping 0
+	ip link set dev br1 up
+
+	ip link set dev v2 up
+	ip address add dev v2 192.0.3.1/24
+	ip route add 10.0.0.1/32 nexthop via 192.0.3.2
+
+	ip link add name vx10 type vxlan id 1010		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx10 up
+
+	ip link set dev vx10 master br1
+	bridge vlan add vid 10 dev vx10 pvid untagged
+
+	ip link add name vx20 type vxlan id 1020		\
+		local 10.0.0.2 remote 10.0.0.1 dstport 4789	\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx20 up
+
+	ip link set dev vx20 master br1
+	bridge vlan add vid 20 dev vx20 pvid untagged
+
+	ip link add name vx4001 type vxlan id 104001		\
+		local 10.0.0.2 dstport 4789			\
+		nolearning noudpcsum tos inherit ttl 100
+	ip link set dev vx4001 up
+
+	ip link set dev vx4001 master br1
+	bridge vlan add vid 4001 dev vx4001 pvid untagged
+
+	ip link set dev w1 master br1
+	ip link set dev w1 up
+	bridge vlan add vid 10 dev w1 pvid untagged
+
+	ip link set dev w3 master br1
+	ip link set dev w3 up
+	bridge vlan add vid 20 dev w3 pvid untagged
+
+	ip address add 10.0.0.2/32 dev lo
+
+	# Create SVIs
+	vrf_create "vrf-green"
+	ip link set dev vrf-green up
+
+	ip link add link br1 name vlan10 up master vrf-green type vlan id 10
+	ip address add 10.1.1.12/24 dev vlan10
+	ip link add link vlan10 name vlan10-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.1.1/24 dev vlan10-v
+
+	ip link add link br1 name vlan20 up master vrf-green type vlan id 20
+	ip address add 10.1.2.12/24 dev vlan20
+	ip link add link vlan20 name vlan20-v up master vrf-green \
+		address 00:00:5e:00:01:01 type macvlan mode private
+	ip address add 10.1.2.1/24 dev vlan20-v
+
+	ip link add link br1 name vlan4001 up master vrf-green \
+		type vlan id 4001
+
+	bridge vlan add vid 10 dev br1 self
+	bridge vlan add vid 20 dev br1 self
+	bridge vlan add vid 4001 dev br1 self
+
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 10
+	bridge fdb add 00:00:5e:00:01:01 dev br1 self local vlan 20
+
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan10-v.rp_filter 0
+	sysctl_set net.ipv4.conf.vlan20-v.rp_filter 0
+}
+export -f ns_switch_create
+
+ns_init()
+{
+	ip link add name w1 type veth peer name w2
+	ip link add name w3 type veth peer name w4
+
+	ip link set dev lo up
+
+	ns_h1_create
+	ns_h2_create
+	ns_switch_create
+}
+export -f ns_init
+
+ns1_create()
+{
+	ip netns add ns1
+	ip link set dev v2 netns ns1
+	in_ns ns1 ns_init
+}
+
+ns1_destroy()
+{
+	ip netns exec ns1 ip link set dev v2 netns 1
+	ip netns del ns1
+}
+
+__l2_vni_init()
+{
+	local mac1=$1; shift
+	local mac2=$1; shift
+	local ip1=$1; shift
+	local ip2=$1; shift
+	local dst=$1; shift
+
+	bridge fdb add $mac1 dev vx10 self master extern_learn static \
+		dst $dst vlan 10
+	bridge fdb add $mac2 dev vx20 self master extern_learn static \
+		dst $dst vlan 20
+
+	ip neigh add $ip1 lladdr $mac1 nud noarp dev vlan10 \
+		extern_learn
+	ip neigh add $ip2 lladdr $mac2 nud noarp dev vlan20 \
+		extern_learn
+}
+export -f __l2_vni_init
+
+l2_vni_init()
+{
+	local h1_ns_mac=$(in_ns ns1 mac_get w2)
+	local h2_ns_mac=$(in_ns ns1 mac_get w4)
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	__l2_vni_init $h1_ns_mac $h2_ns_mac 10.1.1.102 10.1.2.102 10.0.0.2
+	in_ns ns1 __l2_vni_init $h1_mac $h2_mac 10.1.1.101 10.1.2.101 10.0.0.1
+}
+
+__l3_vni_init()
+{
+	local mac=$1; shift
+	local vtep_ip=$1; shift
+	local host1_ip=$1; shift
+	local host2_ip=$1; shift
+
+	bridge fdb add $mac dev vx4001 self master extern_learn static \
+		dst $vtep_ip vlan 4001
+
+	ip neigh add $vtep_ip lladdr $mac nud noarp dev vlan4001 extern_learn
+
+	ip route add $host1_ip/32 vrf vrf-green nexthop via $vtep_ip \
+		dev vlan4001 onlink
+	ip route add $host2_ip/32 vrf vrf-green nexthop via $vtep_ip \
+		dev vlan4001 onlink
+}
+export -f __l3_vni_init
+
+l3_vni_init()
+{
+	local vlan4001_ns_mac=$(in_ns ns1 mac_get vlan4001)
+	local vlan4001_mac=$(mac_get vlan4001)
+
+	__l3_vni_init $vlan4001_ns_mac 10.0.0.2 10.1.1.102 10.1.2.102
+	in_ns ns1 __l3_vni_init $vlan4001_mac 10.0.0.1 10.1.1.101 10.1.2.101
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp1=${NETIFS[p5]}
+	rp2=${NETIFS[p6]}
+
+	vrf_prepare
+	forwarding_enable
+
+	h1_create
+	h2_create
+	switch_create
+
+	ip link add name v1 type veth peer name v2
+	spine_create
+	ns1_create
+
+	l2_vni_init
+	l3_vni_init
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ns1_destroy
+	spine_destroy
+	ip link del dev v1
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	forwarding_restore
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 10.1.2.101 ": local->local vid 10->vid 20"
+	ping_test $h1 10.1.1.102 ": local->remote vid 10->vid 10"
+	ping_test $h2 10.1.2.102 ": local->remote vid 20->vid 20"
+	ping_test $h1 10.1.2.102 ": local->remote vid 10->vid 20"
+	ping_test $h2 10.1.1.102 ": local->remote vid 20->vid 10"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/hwtstamp_config.c b/tools/testing/selftests/net/hwtstamp_config.c
new file mode 100644
index 000000000..e1fdee841
--- /dev/null
+++ b/tools/testing/selftests/net/hwtstamp_config.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Test program for SIOC{G,S}HWTSTAMP
+ * Copyright 2013 Solarflare Communications
+ * Author: Ben Hutchings
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+
+#include <linux/if.h>
+#include <linux/net_tstamp.h>
+#include <linux/sockios.h>
+
+static int
+lookup_value(const char **names, int size, const char *name)
+{
+	int value;
+
+	for (value = 0; value < size; value++)
+		if (names[value] && strcasecmp(names[value], name) == 0)
+			return value;
+
+	return -1;
+}
+
+static const char *
+lookup_name(const char **names, int size, int value)
+{
+	return (value >= 0 && value < size) ? names[value] : NULL;
+}
+
+static void list_names(FILE *f, const char **names, int size)
+{
+	int value;
+
+	for (value = 0; value < size; value++)
+		if (names[value])
+			fprintf(f, "    %s\n", names[value]);
+}
+
+static const char *tx_types[] = {
+#define TX_TYPE(name) [HWTSTAMP_TX_ ## name] = #name
+	TX_TYPE(OFF),
+	TX_TYPE(ON),
+	TX_TYPE(ONESTEP_SYNC)
+#undef TX_TYPE
+};
+#define N_TX_TYPES ((int)(sizeof(tx_types) / sizeof(tx_types[0])))
+
+static const char *rx_filters[] = {
+#define RX_FILTER(name) [HWTSTAMP_FILTER_ ## name] = #name
+	RX_FILTER(NONE),
+	RX_FILTER(ALL),
+	RX_FILTER(SOME),
+	RX_FILTER(PTP_V1_L4_EVENT),
+	RX_FILTER(PTP_V1_L4_SYNC),
+	RX_FILTER(PTP_V1_L4_DELAY_REQ),
+	RX_FILTER(PTP_V2_L4_EVENT),
+	RX_FILTER(PTP_V2_L4_SYNC),
+	RX_FILTER(PTP_V2_L4_DELAY_REQ),
+	RX_FILTER(PTP_V2_L2_EVENT),
+	RX_FILTER(PTP_V2_L2_SYNC),
+	RX_FILTER(PTP_V2_L2_DELAY_REQ),
+	RX_FILTER(PTP_V2_EVENT),
+	RX_FILTER(PTP_V2_SYNC),
+	RX_FILTER(PTP_V2_DELAY_REQ),
+#undef RX_FILTER
+};
+#define N_RX_FILTERS ((int)(sizeof(rx_filters) / sizeof(rx_filters[0])))
+
+static void usage(void)
+{
+	fputs("Usage: hwtstamp_config if_name [tx_type rx_filter]\n"
+	      "tx_type is any of (case-insensitive):\n",
+	      stderr);
+	list_names(stderr, tx_types, N_TX_TYPES);
+	fputs("rx_filter is any of (case-insensitive):\n", stderr);
+	list_names(stderr, rx_filters, N_RX_FILTERS);
+}
+
+int main(int argc, char **argv)
+{
+	struct ifreq ifr;
+	struct hwtstamp_config config;
+	const char *name;
+	int sock;
+
+	if ((argc != 2 && argc != 4) || (strlen(argv[1]) >= IFNAMSIZ)) {
+		usage();
+		return 2;
+	}
+
+	if (argc == 4) {
+		config.flags = 0;
+		config.tx_type = lookup_value(tx_types, N_TX_TYPES, argv[2]);
+		config.rx_filter = lookup_value(rx_filters, N_RX_FILTERS, argv[3]);
+		if (config.tx_type < 0 || config.rx_filter < 0) {
+			usage();
+			return 2;
+		}
+	}
+
+	sock = socket(AF_INET, SOCK_DGRAM, 0);
+	if (sock < 0) {
+		perror("socket");
+		return 1;
+	}
+
+	strcpy(ifr.ifr_name, argv[1]);
+	ifr.ifr_data = (caddr_t)&config;
+
+	if (ioctl(sock, (argc == 2) ? SIOCGHWTSTAMP : SIOCSHWTSTAMP, &ifr)) {
+		perror("ioctl");
+		return 1;
+	}
+
+	printf("flags = %#x\n", config.flags);
+	name = lookup_name(tx_types, N_TX_TYPES, config.tx_type);
+	if (name)
+		printf("tx_type = %s\n", name);
+	else
+		printf("tx_type = %d\n", config.tx_type);
+	name = lookup_name(rx_filters, N_RX_FILTERS, config.rx_filter);
+	if (name)
+		printf("rx_filter = %s\n", name);
+	else
+		printf("rx_filter = %d\n", config.rx_filter);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
new file mode 100755
index 000000000..104a7a5f1
--- /dev/null
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -0,0 +1,537 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# redirect test
+#
+#                     .253 +----+
+#                     +----| r1 |
+#                     |    +----+
+# +----+              |       |.1
+# | h1 |--------------+       |   10.1.1.0/30 2001:db8:1::0/126
+# +----+ .1           |       |.2
+#         172.16.1/24 |    +----+                   +----+
+#    2001:db8:16:1/64 +----| r2 |-------------------| h2 |
+#                     .254 +----+ .254           .2 +----+
+#                                    172.16.2/24
+#                                  2001:db8:16:2/64
+#
+# Route from h1 to h2 goes through r1, eth1 - connection between r1 and r2.
+# Route on r1 changed to go to r2 via eth0. This causes a redirect to be sent
+# from r1 to h1 telling h1 to use r2 when talking to h2.
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+
+H1_N1_IP=172.16.1.1
+R1_N1_IP=172.16.1.253
+R2_N1_IP=172.16.1.254
+
+H1_N1_IP6=2001:db8:16:1::1
+R1_N1_IP6=2001:db8:16:1::253
+R2_N1_IP6=2001:db8:16:1::254
+
+R1_R2_N1_IP=10.1.1.1
+R2_R1_N1_IP=10.1.1.2
+
+R1_R2_N1_IP6=2001:db8:1::1
+R2_R1_N1_IP6=2001:db8:1::2
+
+H2_N2=172.16.2.0/24
+H2_N2_6=2001:db8:16:2::/64
+H2_N2_IP=172.16.2.2
+R2_N2_IP=172.16.2.254
+H2_N2_IP6=2001:db8:16:2::2
+R2_N2_IP6=2001:db8:16:2::254
+
+VRF=red
+VRF_TABLE=1111
+
+################################################################################
+# helpers
+
+log_section()
+{
+	echo
+	echo "###########################################################################"
+	echo "$*"
+	echo "###########################################################################"
+	echo
+}
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+log_debug()
+{
+	if [ "$VERBOSE" = "1" ]; then
+		echo "$*"
+	fi
+}
+
+run_cmd()
+{
+	local cmd="$*"
+	local out
+	local rc
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo "COMMAND: $cmd"
+	fi
+
+	out=$(eval $cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "$out"
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+get_linklocal()
+{
+	local ns=$1
+	local dev=$2
+	local addr
+
+	addr=$(ip -netns $ns -6 -br addr show dev ${dev} | \
+	awk '{
+		for (i = 3; i <= NF; ++i) {
+			if ($i ~ /^fe80/)
+				print $i
+		}
+	}'
+	)
+	addr=${addr/\/*}
+
+	[ -z "$addr" ] && return 1
+
+	echo $addr
+
+	return 0
+}
+
+################################################################################
+# setup and teardown
+
+cleanup()
+{
+	local ns
+
+	for ns in h1 h2 r1 r2; do
+		ip netns del $ns 2>/dev/null
+	done
+}
+
+create_vrf()
+{
+	local ns=$1
+
+	ip -netns ${ns} link add ${VRF} type vrf table ${VRF_TABLE}
+	ip -netns ${ns} link set ${VRF} up
+	ip -netns ${ns} route add vrf ${VRF} unreachable default metric 8192
+	ip -netns ${ns} -6 route add vrf ${VRF} unreachable default metric 8192
+
+	ip -netns ${ns} addr add 127.0.0.1/8 dev ${VRF}
+	ip -netns ${ns} -6 addr add ::1 dev ${VRF} nodad
+
+	ip -netns ${ns} ru del pref 0
+	ip -netns ${ns} ru add pref 32765 from all lookup local
+	ip -netns ${ns} -6 ru del pref 0
+	ip -netns ${ns} -6 ru add pref 32765 from all lookup local
+}
+
+setup()
+{
+	local ns
+
+	#
+	# create nodes as namespaces
+	#
+	for ns in h1 h2 r1 r2; do
+		ip netns add $ns
+		ip -netns $ns li set lo up
+
+		case "${ns}" in
+		h[12]) ip netns exec $ns sysctl -q -w net.ipv4.conf.all.accept_redirects=1
+		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
+		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.accept_redirects=1
+		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
+			;;
+		r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
+
+		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
+		       ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
+		esac
+	done
+
+	#
+	# create interconnects
+	#
+	ip -netns h1 li add eth0 type veth peer name r1h1
+	ip -netns h1 li set r1h1 netns r1 name eth0 up
+
+	ip -netns h1 li add eth1 type veth peer name r2h1
+	ip -netns h1 li set r2h1 netns r2 name eth0 up
+
+	ip -netns h2 li add eth0 type veth peer name r2h2
+	ip -netns h2 li set eth0 up
+	ip -netns h2 li set r2h2 netns r2 name eth2 up
+
+	ip -netns r1 li add eth1 type veth peer name r2r1
+	ip -netns r1 li set eth1 up
+	ip -netns r1 li set r2r1 netns r2 name eth1 up
+
+	#
+	# h1
+	#
+	if [ "${WITH_VRF}" = "yes" ]; then
+		create_vrf "h1"
+		H1_VRF_ARG="vrf ${VRF}"
+		H1_PING_ARG="-I ${VRF}"
+	else
+		H1_VRF_ARG=
+		H1_PING_ARG=
+	fi
+	ip -netns h1 li add br0 type bridge
+	if [ "${WITH_VRF}" = "yes" ]; then
+		ip -netns h1 li set br0 vrf ${VRF} up
+	else
+		ip -netns h1 li set br0 up
+	fi
+	ip -netns h1 addr add dev br0 ${H1_N1_IP}/24
+	ip -netns h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
+	ip -netns h1 li set eth0 master br0 up
+	ip -netns h1 li set eth1 master br0 up
+
+	#
+	# h2
+	#
+	ip -netns h2 addr add dev eth0 ${H2_N2_IP}/24
+	ip -netns h2 ro add default via ${R2_N2_IP} dev eth0
+	ip -netns h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad
+	ip -netns h2 -6 ro add default via ${R2_N2_IP6} dev eth0
+
+	#
+	# r1
+	#
+	ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24
+	ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
+	ip -netns r1 addr add dev eth1 ${R1_R2_N1_IP}/30
+	ip -netns r1 -6 addr add dev eth1 ${R1_R2_N1_IP6}/126 nodad
+
+	#
+	# r2
+	#
+	ip -netns r2 addr add dev eth0 ${R2_N1_IP}/24
+	ip -netns r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
+	ip -netns r2 addr add dev eth1 ${R2_R1_N1_IP}/30
+	ip -netns r2 -6 addr add dev eth1 ${R2_R1_N1_IP6}/126 nodad
+	ip -netns r2 addr add dev eth2 ${R2_N2_IP}/24
+	ip -netns r2 -6 addr add dev eth2 ${R2_N2_IP6}/64 nodad
+
+	sleep 2
+
+	R1_LLADDR=$(get_linklocal r1 eth0)
+	if [ $? -ne 0 ]; then
+		echo "Error: Failed to get link-local address of r1's eth0"
+		exit 1
+	fi
+	log_debug "initial gateway is R1's lladdr = ${R1_LLADDR}"
+
+	R2_LLADDR=$(get_linklocal r2 eth0)
+	if [ $? -ne 0 ]; then
+		echo "Error: Failed to get link-local address of r2's eth0"
+		exit 1
+	fi
+	log_debug "initial gateway is R2's lladdr = ${R2_LLADDR}"
+}
+
+change_h2_mtu()
+{
+	local mtu=$1
+
+	run_cmd ip -netns h2 li set eth0 mtu ${mtu}
+	run_cmd ip -netns r2 li set eth2 mtu ${mtu}
+}
+
+check_exception()
+{
+	local mtu="$1"
+	local with_redirect="$2"
+	local desc="$3"
+
+	# From 172.16.1.101: icmp_seq=1 Redirect Host(New nexthop: 172.16.1.102)
+	if [ "$VERBOSE" = "1" ]; then
+		echo "Commands to check for exception:"
+		run_cmd ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP}
+		run_cmd ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6}
+	fi
+
+	if [ -n "${mtu}" ]; then
+		mtu=" mtu ${mtu}"
+	fi
+	if [ "$with_redirect" = "yes" ]; then
+		ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
+		grep -q "cache <redirected> expires [0-9]*sec${mtu}"
+	elif [ -n "${mtu}" ]; then
+		ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
+		grep -q "cache expires [0-9]*sec${mtu}"
+	else
+		# want to verify that neither mtu nor redirected appears in
+		# the route get output. The -v will wipe out the cache line
+		# if either are set so the last grep -q will not find a match
+		ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
+		grep -E -v 'mtu|redirected' | grep -q "cache"
+	fi
+	log_test $? 0 "IPv4: ${desc}"
+
+	# No PMTU info for test "redirect" and "mtu exception plus redirect"
+	if [ "$with_redirect" = "yes" ] && [ "$desc" != "redirect exception plus mtu" ]; then
+		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
+		grep -v "mtu" | grep -q "${H2_N2_IP6} .*via ${R2_LLADDR} dev br0"
+	elif [ -n "${mtu}" ]; then
+		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
+		grep -q "${mtu}"
+	else
+		# IPv6 is a bit harder. First strip out the match if it
+		# contains an mtu exception and then look for the first
+		# gateway - R1's lladdr
+		ip -netns h1 -6 ro get ${H1_VRF_ARG} ${H2_N2_IP6} | \
+		grep -v "mtu" | grep -q "${R1_LLADDR}"
+	fi
+	log_test $? 0 "IPv6: ${desc}"
+}
+
+run_ping()
+{
+	local sz=$1
+
+	run_cmd ip netns exec h1 ping -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP}
+	run_cmd ip netns exec h1 ${ping6} -q -M want -i 0.5 -c 10 -w 2 -s ${sz} ${H1_PING_ARG} ${H2_N2_IP6}
+}
+
+replace_route_new()
+{
+	# r1 to h2 via r2 and eth0
+	run_cmd ip -netns r1 nexthop replace id 1 via ${R2_N1_IP} dev eth0
+	run_cmd ip -netns r1 nexthop replace id 2 via ${R2_LLADDR} dev eth0
+}
+
+reset_route_new()
+{
+	run_cmd ip -netns r1 nexthop flush
+	run_cmd ip -netns h1 nexthop flush
+
+	initial_route_new
+}
+
+initial_route_new()
+{
+	# r1 to h2 via r2 and eth1
+	run_cmd ip -netns r1 nexthop add id 1 via ${R2_R1_N1_IP} dev eth1
+	run_cmd ip -netns r1 ro add ${H2_N2} nhid 1
+
+	run_cmd ip -netns r1 nexthop add id 2 via ${R2_R1_N1_IP6} dev eth1
+	run_cmd ip -netns r1 -6 ro add ${H2_N2_6} nhid 2
+
+	# h1 to h2 via r1
+	run_cmd ip -netns h1 nexthop add id 1 via ${R1_N1_IP} dev br0
+	run_cmd ip -netns h1 ro add ${H1_VRF_ARG} ${H2_N2} nhid 1
+
+	run_cmd ip -netns h1 nexthop add id 2 via ${R1_LLADDR} dev br0
+	run_cmd ip -netns h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} nhid 2
+}
+
+replace_route_legacy()
+{
+	# r1 to h2 via r2 and eth0
+	run_cmd ip -netns r1    ro replace ${H2_N2}   via ${R2_N1_IP}  dev eth0
+	run_cmd ip -netns r1 -6 ro replace ${H2_N2_6} via ${R2_LLADDR} dev eth0
+}
+
+reset_route_legacy()
+{
+	run_cmd ip -netns r1    ro del ${H2_N2}
+	run_cmd ip -netns r1 -6 ro del ${H2_N2_6}
+
+	run_cmd ip -netns h1    ro del ${H1_VRF_ARG} ${H2_N2}
+	run_cmd ip -netns h1 -6 ro del ${H1_VRF_ARG} ${H2_N2_6}
+
+	initial_route_legacy
+}
+
+initial_route_legacy()
+{
+	# r1 to h2 via r2 and eth1
+	run_cmd ip -netns r1    ro add ${H2_N2}   via ${R2_R1_N1_IP}  dev eth1
+	run_cmd ip -netns r1 -6 ro add ${H2_N2_6} via ${R2_R1_N1_IP6} dev eth1
+
+	# h1 to h2 via r1
+	# - IPv6 redirect only works if gateway is the LLA
+	run_cmd ip -netns h1    ro add ${H1_VRF_ARG} ${H2_N2} via ${R1_N1_IP} dev br0
+	run_cmd ip -netns h1 -6 ro add ${H1_VRF_ARG} ${H2_N2_6} via ${R1_LLADDR} dev br0
+}
+
+check_connectivity()
+{
+	local rc
+
+	run_cmd ip netns exec h1 ping -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP}
+	rc=$?
+	run_cmd ip netns exec h1 ${ping6} -c1 -w1 ${H1_PING_ARG} ${H2_N2_IP6}
+	[ $? -ne 0 ] && rc=$?
+
+	return $rc
+}
+
+do_test()
+{
+	local ttype="$1"
+
+	eval initial_route_${ttype}
+
+	# verify connectivity
+	check_connectivity
+	if [ $? -ne 0 ]; then
+		echo "Error: Basic connectivity is broken"
+		ret=1
+		return
+	fi
+
+	# redirect exception followed by mtu
+	eval replace_route_${ttype}
+	run_ping 64
+	check_exception "" "yes" "redirect exception"
+
+	check_connectivity
+	if [ $? -ne 0 ]; then
+		echo "Error: Basic connectivity is broken after redirect"
+		ret=1
+		return
+	fi
+
+	change_h2_mtu 1300
+	run_ping 1350
+	check_exception "1300" "yes" "redirect exception plus mtu"
+
+	# remove exceptions and restore routing
+	change_h2_mtu 1500
+	eval reset_route_${ttype}
+
+	check_connectivity
+	if [ $? -ne 0 ]; then
+		echo "Error: Basic connectivity is broken after reset"
+		ret=1
+		return
+	fi
+	check_exception "" "no" "routing reset"
+
+	# MTU exception followed by redirect
+	change_h2_mtu 1300
+	run_ping 1350
+	check_exception "1300" "no" "mtu exception"
+
+	eval replace_route_${ttype}
+	run_ping 64
+	check_exception "1300" "yes" "mtu exception plus redirect"
+
+	check_connectivity
+	if [ $? -ne 0 ]; then
+		echo "Error: Basic connectivity is broken after redirect"
+		ret=1
+		return
+	fi
+}
+
+################################################################################
+# usage
+
+usage()
+{
+        cat <<EOF
+usage: ${0##*/} OPTS
+
+	-p          Pause on fail
+	-v          verbose mode (show commands and output)
+EOF
+}
+
+################################################################################
+# main
+
+# Some systems don't have a ping6 binary anymore
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+ret=0
+nsuccess=0
+nfail=0
+
+while getopts :pv o
+do
+	case $o in
+                p) PAUSE_ON_FAIL=yes;;
+                v) VERBOSE=$(($VERBOSE + 1));;
+                *) usage; exit 1;;
+	esac
+done
+
+trap cleanup EXIT
+
+cleanup
+WITH_VRF=no
+setup
+
+log_section "Legacy routing"
+do_test "legacy"
+
+cleanup
+log_section "Legacy routing with VRF"
+WITH_VRF=yes
+setup
+do_test "legacy"
+
+cleanup
+log_section "Routing with nexthop objects"
+ip nexthop ls >/dev/null 2>&1
+if [ $? -eq 0 ]; then
+	WITH_VRF=no
+	setup
+	do_test "new"
+
+	cleanup
+	log_section "Routing with nexthop objects and VRF"
+	WITH_VRF=yes
+	setup
+	do_test "new"
+else
+	echo "Nexthop objects not supported; skipping tests"
+fi
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n"   ${nfail}
+
+exit $ret
diff --git a/tools/testing/selftests/net/in_netns.sh b/tools/testing/selftests/net/in_netns.sh
new file mode 100755
index 000000000..88795b510
--- /dev/null
+++ b/tools/testing/selftests/net/in_netns.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Execute a subprocess in a network namespace
+
+set -e
+
+readonly NETNS="ns-$(mktemp -u XXXXXX)"
+
+setup() {
+	ip netns add "${NETNS}"
+	ip -netns "${NETNS}" link set lo up
+}
+
+cleanup() {
+	ip netns del "${NETNS}"
+}
+
+trap cleanup EXIT
+setup
+
+ip netns exec "${NETNS}" "$@"
+exit "$?"
diff --git a/tools/testing/selftests/net/ip6_gre_headroom.sh b/tools/testing/selftests/net/ip6_gre_headroom.sh
new file mode 100755
index 000000000..5b41e8bb6
--- /dev/null
+++ b/tools/testing/selftests/net/ip6_gre_headroom.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test that enough headroom is reserved for the first packet passing through an
+# IPv6 GRE-like netdevice.
+
+setup_prepare()
+{
+	ip link add h1 type veth peer name swp1
+	ip link add h3 type veth peer name swp3
+
+	ip link set dev h1 up
+	ip address add 192.0.2.1/28 dev h1
+
+	ip link add dev vh3 type vrf table 20
+	ip link set dev h3 master vh3
+	ip link set dev vh3 up
+	ip link set dev h3 up
+
+	ip link set dev swp3 up
+	ip address add dev swp3 2001:db8:2::1/64
+	ip address add dev swp3 2001:db8:2::3/64
+
+	ip link set dev swp1 up
+	tc qdisc add dev swp1 clsact
+
+	ip link add name er6 type ip6erspan \
+	   local 2001:db8:2::1 remote 2001:db8:2::2 oseq okey 123
+	ip link set dev er6 up
+
+	ip link add name gt6 type ip6gretap \
+	   local 2001:db8:2::3 remote 2001:db8:2::4
+	ip link set dev gt6 up
+
+	sleep 1
+}
+
+cleanup()
+{
+	ip link del dev gt6
+	ip link del dev er6
+	ip link del dev swp1
+	ip link del dev swp3
+	ip link del dev vh3
+}
+
+test_headroom()
+{
+	local type=$1; shift
+	local tundev=$1; shift
+
+	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
+		action mirred egress mirror dev $tundev
+	ping -I h1 192.0.2.2 -c 1 -w 2 &> /dev/null
+	tc filter del dev swp1 ingress pref 1000
+
+	# If it doesn't panic, it passes.
+	printf "TEST: %-60s  [PASS]\n" "$type headroom"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+test_headroom ip6gretap gt6
+test_headroom ip6erspan er6
diff --git a/tools/testing/selftests/net/ip_defrag.c b/tools/testing/selftests/net/ip_defrag.c
new file mode 100644
index 000000000..f9ed749fd
--- /dev/null
+++ b/tools/testing/selftests/net/ip_defrag.c
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <linux/in.h>
+#include <netinet/ip.h>
+#include <netinet/ip6.h>
+#include <netinet/udp.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+static bool		cfg_do_ipv4;
+static bool		cfg_do_ipv6;
+static bool		cfg_verbose;
+static bool		cfg_overlap;
+static bool		cfg_permissive;
+static unsigned short	cfg_port = 9000;
+
+const struct in_addr addr4 = { .s_addr = __constant_htonl(INADDR_LOOPBACK + 2) };
+const struct in6_addr addr6 = IN6ADDR_LOOPBACK_INIT;
+
+#define IP4_HLEN	(sizeof(struct iphdr))
+#define IP6_HLEN	(sizeof(struct ip6_hdr))
+#define UDP_HLEN	(sizeof(struct udphdr))
+
+/* IPv6 fragment header lenth. */
+#define FRAG_HLEN	8
+
+static int payload_len;
+static int max_frag_len;
+
+#define MSG_LEN_MAX	10000	/* Max UDP payload length. */
+
+#define IP4_MF		(1u << 13)  /* IPv4 MF flag. */
+#define IP6_MF		(1)  /* IPv6 MF flag. */
+
+#define CSUM_MANGLED_0 (0xffff)
+
+static uint8_t udp_payload[MSG_LEN_MAX];
+static uint8_t ip_frame[IP_MAXPACKET];
+static uint32_t ip_id = 0xabcd;
+static int msg_counter;
+static int frag_counter;
+static unsigned int seed;
+
+/* Receive a UDP packet. Validate it matches udp_payload. */
+static void recv_validate_udp(int fd_udp)
+{
+	ssize_t ret;
+	static uint8_t recv_buff[MSG_LEN_MAX];
+
+	ret = recv(fd_udp, recv_buff, payload_len, 0);
+	msg_counter++;
+
+	if (cfg_overlap) {
+		if (ret == -1 && (errno == ETIMEDOUT || errno == EAGAIN))
+			return;  /* OK */
+		if (!cfg_permissive) {
+			if (ret != -1)
+				error(1, 0, "recv: expected timeout; got %d",
+					(int)ret);
+			error(1, errno, "recv: expected timeout: %d", errno);
+		}
+	}
+
+	if (ret == -1)
+		error(1, errno, "recv: payload_len = %d max_frag_len = %d",
+			payload_len, max_frag_len);
+	if (ret != payload_len)
+		error(1, 0, "recv: wrong size: %d vs %d", (int)ret, payload_len);
+	if (memcmp(udp_payload, recv_buff, payload_len))
+		error(1, 0, "recv: wrong data");
+}
+
+static uint32_t raw_checksum(uint8_t *buf, int len, uint32_t sum)
+{
+	int i;
+
+	for (i = 0; i < (len & ~1U); i += 2) {
+		sum += (u_int16_t)ntohs(*((u_int16_t *)(buf + i)));
+		if (sum > 0xffff)
+			sum -= 0xffff;
+	}
+
+	if (i < len) {
+		sum += buf[i] << 8;
+		if (sum > 0xffff)
+			sum -= 0xffff;
+	}
+
+	return sum;
+}
+
+static uint16_t udp_checksum(struct ip *iphdr, struct udphdr *udphdr)
+{
+	uint32_t sum = 0;
+	uint16_t res;
+
+	sum = raw_checksum((uint8_t *)&iphdr->ip_src, 2 * sizeof(iphdr->ip_src),
+				IPPROTO_UDP + (uint32_t)(UDP_HLEN + payload_len));
+	sum = raw_checksum((uint8_t *)udphdr, UDP_HLEN, sum);
+	sum = raw_checksum((uint8_t *)udp_payload, payload_len, sum);
+	res = 0xffff & ~sum;
+	if (res)
+		return htons(res);
+	else
+		return CSUM_MANGLED_0;
+}
+
+static uint16_t udp6_checksum(struct ip6_hdr *iphdr, struct udphdr *udphdr)
+{
+	uint32_t sum = 0;
+	uint16_t res;
+
+	sum = raw_checksum((uint8_t *)&iphdr->ip6_src, 2 * sizeof(iphdr->ip6_src),
+				IPPROTO_UDP);
+	sum = raw_checksum((uint8_t *)&udphdr->len, sizeof(udphdr->len), sum);
+	sum = raw_checksum((uint8_t *)udphdr, UDP_HLEN, sum);
+	sum = raw_checksum((uint8_t *)udp_payload, payload_len, sum);
+	res = 0xffff & ~sum;
+	if (res)
+		return htons(res);
+	else
+		return CSUM_MANGLED_0;
+}
+
+static void send_fragment(int fd_raw, struct sockaddr *addr, socklen_t alen,
+				int offset, bool ipv6)
+{
+	int frag_len;
+	int res;
+	int payload_offset = offset > 0 ? offset - UDP_HLEN : 0;
+	uint8_t *frag_start = ipv6 ? ip_frame + IP6_HLEN + FRAG_HLEN :
+					ip_frame + IP4_HLEN;
+
+	if (offset == 0) {
+		struct udphdr udphdr;
+		udphdr.source = htons(cfg_port + 1);
+		udphdr.dest = htons(cfg_port);
+		udphdr.len = htons(UDP_HLEN + payload_len);
+		udphdr.check = 0;
+		if (ipv6)
+			udphdr.check = udp6_checksum((struct ip6_hdr *)ip_frame, &udphdr);
+		else
+			udphdr.check = udp_checksum((struct ip *)ip_frame, &udphdr);
+		memcpy(frag_start, &udphdr, UDP_HLEN);
+	}
+
+	if (ipv6) {
+		struct ip6_hdr *ip6hdr = (struct ip6_hdr *)ip_frame;
+		struct ip6_frag *fraghdr = (struct ip6_frag *)(ip_frame + IP6_HLEN);
+		if (payload_len - payload_offset <= max_frag_len && offset > 0) {
+			/* This is the last fragment. */
+			frag_len = FRAG_HLEN + payload_len - payload_offset;
+			fraghdr->ip6f_offlg = htons(offset);
+		} else {
+			frag_len = FRAG_HLEN + max_frag_len;
+			fraghdr->ip6f_offlg = htons(offset | IP6_MF);
+		}
+		ip6hdr->ip6_plen = htons(frag_len);
+		if (offset == 0)
+			memcpy(frag_start + UDP_HLEN, udp_payload,
+				frag_len - FRAG_HLEN - UDP_HLEN);
+		else
+			memcpy(frag_start, udp_payload + payload_offset,
+				frag_len - FRAG_HLEN);
+		frag_len += IP6_HLEN;
+	} else {
+		struct ip *iphdr = (struct ip *)ip_frame;
+		if (payload_len - payload_offset <= max_frag_len && offset > 0) {
+			/* This is the last fragment. */
+			frag_len = IP4_HLEN + payload_len - payload_offset;
+			iphdr->ip_off = htons(offset / 8);
+		} else {
+			frag_len = IP4_HLEN + max_frag_len;
+			iphdr->ip_off = htons(offset / 8 | IP4_MF);
+		}
+		iphdr->ip_len = htons(frag_len);
+		if (offset == 0)
+			memcpy(frag_start + UDP_HLEN, udp_payload,
+				frag_len - IP4_HLEN - UDP_HLEN);
+		else
+			memcpy(frag_start, udp_payload + payload_offset,
+				frag_len - IP4_HLEN);
+	}
+
+	res = sendto(fd_raw, ip_frame, frag_len, 0, addr, alen);
+	if (res < 0 && errno != EPERM)
+		error(1, errno, "send_fragment");
+	if (res >= 0 && res != frag_len)
+		error(1, 0, "send_fragment: %d vs %d", res, frag_len);
+
+	frag_counter++;
+}
+
+static void send_udp_frags(int fd_raw, struct sockaddr *addr,
+				socklen_t alen, bool ipv6)
+{
+	struct ip *iphdr = (struct ip *)ip_frame;
+	struct ip6_hdr *ip6hdr = (struct ip6_hdr *)ip_frame;
+	int res;
+	int offset;
+	int frag_len;
+
+	/* Send the UDP datagram using raw IP fragments: the 0th fragment
+	 * has the UDP header; other fragments are pieces of udp_payload
+	 * split in chunks of frag_len size.
+	 *
+	 * Odd fragments (1st, 3rd, 5th, etc.) are sent out first, then
+	 * even fragments (0th, 2nd, etc.) are sent out.
+	 */
+	if (ipv6) {
+		struct ip6_frag *fraghdr = (struct ip6_frag *)(ip_frame + IP6_HLEN);
+		((struct sockaddr_in6 *)addr)->sin6_port = 0;
+		memset(ip6hdr, 0, sizeof(*ip6hdr));
+		ip6hdr->ip6_flow = htonl(6<<28);  /* Version. */
+		ip6hdr->ip6_nxt = IPPROTO_FRAGMENT;
+		ip6hdr->ip6_hops = 255;
+		ip6hdr->ip6_src = addr6;
+		ip6hdr->ip6_dst = addr6;
+		fraghdr->ip6f_nxt = IPPROTO_UDP;
+		fraghdr->ip6f_reserved = 0;
+		fraghdr->ip6f_ident = htonl(ip_id++);
+	} else {
+		memset(iphdr, 0, sizeof(*iphdr));
+		iphdr->ip_hl = 5;
+		iphdr->ip_v = 4;
+		iphdr->ip_tos = 0;
+		iphdr->ip_id = htons(ip_id++);
+		iphdr->ip_ttl = 0x40;
+		iphdr->ip_p = IPPROTO_UDP;
+		iphdr->ip_src.s_addr = htonl(INADDR_LOOPBACK);
+		iphdr->ip_dst = addr4;
+		iphdr->ip_sum = 0;
+	}
+
+	/* Occasionally test in-order fragments. */
+	if (!cfg_overlap && (rand() % 100 < 15)) {
+		offset = 0;
+		while (offset < (UDP_HLEN + payload_len)) {
+			send_fragment(fd_raw, addr, alen, offset, ipv6);
+			offset += max_frag_len;
+		}
+		return;
+	}
+
+	/* Occasionally test IPv4 "runs" (see net/ipv4/ip_fragment.c) */
+	if (!cfg_overlap && (rand() % 100 < 20) &&
+			(payload_len > 9 * max_frag_len)) {
+		offset = 6 * max_frag_len;
+		while (offset < (UDP_HLEN + payload_len)) {
+			send_fragment(fd_raw, addr, alen, offset, ipv6);
+			offset += max_frag_len;
+		}
+		offset = 3 * max_frag_len;
+		while (offset < 6 * max_frag_len) {
+			send_fragment(fd_raw, addr, alen, offset, ipv6);
+			offset += max_frag_len;
+		}
+		offset = 0;
+		while (offset < 3 * max_frag_len) {
+			send_fragment(fd_raw, addr, alen, offset, ipv6);
+			offset += max_frag_len;
+		}
+		return;
+	}
+
+	/* Odd fragments. */
+	offset = max_frag_len;
+	while (offset < (UDP_HLEN + payload_len)) {
+		send_fragment(fd_raw, addr, alen, offset, ipv6);
+		/* IPv4 ignores duplicates, so randomly send a duplicate. */
+		if (rand() % 100 == 1)
+			send_fragment(fd_raw, addr, alen, offset, ipv6);
+		offset += 2 * max_frag_len;
+	}
+
+	if (cfg_overlap) {
+		/* Send an extra random fragment.
+		 *
+		 * Duplicates and some fragments completely inside
+		 * previously sent fragments are dropped/ignored. So
+		 * random offset and frag_len can result in a dropped
+		 * fragment instead of a dropped queue/packet. Thus we
+		 * hard-code offset and frag_len.
+		 */
+		if (max_frag_len * 4 < payload_len || max_frag_len < 16) {
+			/* not enough payload for random offset and frag_len. */
+			offset = 8;
+			frag_len = UDP_HLEN + max_frag_len;
+		} else {
+			offset = rand() % (payload_len / 2);
+			frag_len = 2 * max_frag_len + 1 + rand() % 256;
+		}
+		if (ipv6) {
+			struct ip6_frag *fraghdr = (struct ip6_frag *)(ip_frame + IP6_HLEN);
+			/* sendto() returns EINVAL if offset + frag_len is too small. */
+			/* In IPv6 if !!(frag_len % 8), the fragment is dropped. */
+			frag_len &= ~0x7;
+			fraghdr->ip6f_offlg = htons(offset / 8 | IP6_MF);
+			ip6hdr->ip6_plen = htons(frag_len);
+			frag_len += IP6_HLEN;
+		} else {
+			frag_len += IP4_HLEN;
+			iphdr->ip_off = htons(offset / 8 | IP4_MF);
+			iphdr->ip_len = htons(frag_len);
+		}
+		res = sendto(fd_raw, ip_frame, frag_len, 0, addr, alen);
+		if (res < 0 && errno != EPERM)
+			error(1, errno, "sendto overlap: %d", frag_len);
+		if (res >= 0 && res != frag_len)
+			error(1, 0, "sendto overlap: %d vs %d", (int)res, frag_len);
+		frag_counter++;
+	}
+
+	/* Event fragments. */
+	offset = 0;
+	while (offset < (UDP_HLEN + payload_len)) {
+		send_fragment(fd_raw, addr, alen, offset, ipv6);
+		/* IPv4 ignores duplicates, so randomly send a duplicate. */
+		if (rand() % 100 == 1)
+			send_fragment(fd_raw, addr, alen, offset, ipv6);
+		offset += 2 * max_frag_len;
+	}
+}
+
+static void run_test(struct sockaddr *addr, socklen_t alen, bool ipv6)
+{
+	int fd_tx_raw, fd_rx_udp;
+	/* Frag queue timeout is set to one second in the calling script;
+	 * socket timeout should be just a bit longer to avoid tests interfering
+	 * with each other.
+	 */
+	struct timeval tv = { .tv_sec = 1, .tv_usec = 10 };
+	int idx;
+	int min_frag_len = 8;
+
+	/* Initialize the payload. */
+	for (idx = 0; idx < MSG_LEN_MAX; ++idx)
+		udp_payload[idx] = idx % 256;
+
+	/* Open sockets. */
+	fd_tx_raw = socket(addr->sa_family, SOCK_RAW, IPPROTO_RAW);
+	if (fd_tx_raw == -1)
+		error(1, errno, "socket tx_raw");
+
+	fd_rx_udp = socket(addr->sa_family, SOCK_DGRAM, 0);
+	if (fd_rx_udp == -1)
+		error(1, errno, "socket rx_udp");
+	if (bind(fd_rx_udp, addr, alen))
+		error(1, errno, "bind");
+	/* Fail fast. */
+	if (setsockopt(fd_rx_udp, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)))
+		error(1, errno, "setsockopt rcv timeout");
+
+	for (payload_len = min_frag_len; payload_len < MSG_LEN_MAX;
+			payload_len += (rand() % 4096)) {
+		if (cfg_verbose)
+			printf("payload_len: %d\n", payload_len);
+
+		if (cfg_overlap) {
+			/* With overlaps, one send/receive pair below takes
+			 * at least one second (== timeout) to run, so there
+			 * is not enough test time to run a nested loop:
+			 * the full overlap test takes 20-30 seconds.
+			 */
+			max_frag_len = min_frag_len +
+				rand() % (1500 - FRAG_HLEN - min_frag_len);
+			send_udp_frags(fd_tx_raw, addr, alen, ipv6);
+			recv_validate_udp(fd_rx_udp);
+		} else {
+			/* Without overlaps, each packet reassembly (== one
+			 * send/receive pair below) takes very little time to
+			 * run, so we can easily afford more thourough testing
+			 * with a nested loop: the full non-overlap test takes
+			 * less than one second).
+			 */
+			max_frag_len = min_frag_len;
+			do {
+				send_udp_frags(fd_tx_raw, addr, alen, ipv6);
+				recv_validate_udp(fd_rx_udp);
+				max_frag_len += 8 * (rand() % 8);
+			} while (max_frag_len < (1500 - FRAG_HLEN) &&
+				 max_frag_len <= payload_len);
+		}
+	}
+
+	/* Cleanup. */
+	if (close(fd_tx_raw))
+		error(1, errno, "close tx_raw");
+	if (close(fd_rx_udp))
+		error(1, errno, "close rx_udp");
+
+	if (cfg_verbose)
+		printf("processed %d messages, %d fragments\n",
+			msg_counter, frag_counter);
+
+	fprintf(stderr, "PASS\n");
+}
+
+
+static void run_test_v4(void)
+{
+	struct sockaddr_in addr = {0};
+
+	addr.sin_family = AF_INET;
+	addr.sin_port = htons(cfg_port);
+	addr.sin_addr = addr4;
+
+	run_test((void *)&addr, sizeof(addr), false /* !ipv6 */);
+}
+
+static void run_test_v6(void)
+{
+	struct sockaddr_in6 addr = {0};
+
+	addr.sin6_family = AF_INET6;
+	addr.sin6_port = htons(cfg_port);
+	addr.sin6_addr = addr6;
+
+	run_test((void *)&addr, sizeof(addr), true /* ipv6 */);
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c;
+
+	while ((c = getopt(argc, argv, "46opv")) != -1) {
+		switch (c) {
+		case '4':
+			cfg_do_ipv4 = true;
+			break;
+		case '6':
+			cfg_do_ipv6 = true;
+			break;
+		case 'o':
+			cfg_overlap = true;
+			break;
+		case 'p':
+			cfg_permissive = true;
+			break;
+		case 'v':
+			cfg_verbose = true;
+			break;
+		default:
+			error(1, 0, "%s: parse error", argv[0]);
+		}
+	}
+}
+
+int main(int argc, char **argv)
+{
+	parse_opts(argc, argv);
+	seed = time(NULL);
+	srand(seed);
+	/* Print the seed to track/reproduce potential failures. */
+	printf("seed = %d\n", seed);
+
+	if (cfg_do_ipv4)
+		run_test_v4();
+	if (cfg_do_ipv6)
+		run_test_v6();
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/ip_defrag.sh b/tools/testing/selftests/net/ip_defrag.sh
new file mode 100755
index 000000000..ceb7ad4db
--- /dev/null
+++ b/tools/testing/selftests/net/ip_defrag.sh
@@ -0,0 +1,64 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run a couple of IP defragmentation tests.
+
+set +x
+set -e
+
+modprobe -q nf_defrag_ipv6
+
+readonly NETNS="ns-$(mktemp -u XXXXXX)"
+
+setup() {
+	ip netns add "${NETNS}"
+	ip -netns "${NETNS}" link set lo up
+
+	ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_high_thresh=9000000 >/dev/null 2>&1
+	ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_low_thresh=7000000 >/dev/null 2>&1
+	ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_time=1 >/dev/null 2>&1
+
+	ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_high_thresh=9000000 >/dev/null 2>&1
+	ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_low_thresh=7000000 >/dev/null 2>&1
+	ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_time=1 >/dev/null 2>&1
+
+	ip netns exec "${NETNS}" sysctl -w net.netfilter.nf_conntrack_frag6_high_thresh=9000000 >/dev/null 2>&1
+	ip netns exec "${NETNS}" sysctl -w net.netfilter.nf_conntrack_frag6_low_thresh=7000000  >/dev/null 2>&1
+	ip netns exec "${NETNS}" sysctl -w net.netfilter.nf_conntrack_frag6_timeout=1 >/dev/null 2>&1
+
+	# DST cache can get full with a lot of frags, with GC not keeping up with the test.
+	ip netns exec "${NETNS}" sysctl -w net.ipv6.route.max_size=65536 >/dev/null 2>&1
+}
+
+cleanup() {
+	ip netns del "${NETNS}"
+}
+
+trap cleanup EXIT
+setup
+
+echo "ipv4 defrag"
+ip netns exec "${NETNS}" ./ip_defrag -4
+
+echo "ipv4 defrag with overlaps"
+ip netns exec "${NETNS}" ./ip_defrag -4o
+
+echo "ipv6 defrag"
+ip netns exec "${NETNS}" ./ip_defrag -6
+
+echo "ipv6 defrag with overlaps"
+ip netns exec "${NETNS}" ./ip_defrag -6o
+
+# insert an nf_conntrack rule so that the codepath in nf_conntrack_reasm.c taken
+ip netns exec "${NETNS}" ip6tables -A INPUT  -m conntrack --ctstate INVALID -j ACCEPT
+
+echo "ipv6 nf_conntrack defrag"
+ip netns exec "${NETNS}" ./ip_defrag -6
+
+echo "ipv6 nf_conntrack defrag with overlaps"
+# netfilter will drop some invalid packets, so we run the test in
+# permissive mode: i.e. pass the test if the packet is correctly assembled
+# even if we sent an overlap
+ip netns exec "${NETNS}" ./ip_defrag -6op
+
+echo "all tests done"
diff --git a/tools/testing/selftests/net/ipsec.c b/tools/testing/selftests/net/ipsec.c
new file mode 100644
index 000000000..03b048b66
--- /dev/null
+++ b/tools/testing/selftests/net/ipsec.c
@@ -0,0 +1,2195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ipsec.c - Check xfrm on veth inside a net-ns.
+ * Copyright (c) 2018 Dmitry Safonov
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <asm/types.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <linux/limits.h>
+#include <linux/netlink.h>
+#include <linux/random.h>
+#include <linux/rtnetlink.h>
+#include <linux/veth.h>
+#include <linux/xfrm.h>
+#include <netinet/in.h>
+#include <net/if.h>
+#include <sched.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/syscall.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <time.h>
+#include <unistd.h>
+
+#include "../kselftest.h"
+
+#define printk(fmt, ...)						\
+	ksft_print_msg("%d[%u] " fmt "\n", getpid(), __LINE__, ##__VA_ARGS__)
+
+#define pr_err(fmt, ...)	printk(fmt ": %m", ##__VA_ARGS__)
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+
+#define IPV4_STR_SZ	16	/* xxx.xxx.xxx.xxx is longest + \0 */
+#define MAX_PAYLOAD	2048
+#define XFRM_ALGO_KEY_BUF_SIZE	512
+#define MAX_PROCESSES	(1 << 14) /* /16 mask divided by /30 subnets */
+#define INADDR_A	((in_addr_t) 0x0a000000) /* 10.0.0.0 */
+#define INADDR_B	((in_addr_t) 0xc0a80000) /* 192.168.0.0 */
+
+/* /30 mask for one veth connection */
+#define PREFIX_LEN	30
+#define child_ip(nr)	(4*nr + 1)
+#define grchild_ip(nr)	(4*nr + 2)
+
+#define VETH_FMT	"ktst-%d"
+#define VETH_LEN	12
+
+static int nsfd_parent	= -1;
+static int nsfd_childa	= -1;
+static int nsfd_childb	= -1;
+static long page_size;
+
+/*
+ * ksft_cnt is static in kselftest, so isn't shared with children.
+ * We have to send a test result back to parent and count there.
+ * results_fd is a pipe with test feedback from children.
+ */
+static int results_fd[2];
+
+const unsigned int ping_delay_nsec	= 50 * 1000 * 1000;
+const unsigned int ping_timeout		= 300;
+const unsigned int ping_count		= 100;
+const unsigned int ping_success		= 80;
+
+static void randomize_buffer(void *buf, size_t buflen)
+{
+	int *p = (int *)buf;
+	size_t words = buflen / sizeof(int);
+	size_t leftover = buflen % sizeof(int);
+
+	if (!buflen)
+		return;
+
+	while (words--)
+		*p++ = rand();
+
+	if (leftover) {
+		int tmp = rand();
+
+		memcpy(buf + buflen - leftover, &tmp, leftover);
+	}
+
+	return;
+}
+
+static int unshare_open(void)
+{
+	const char *netns_path = "/proc/self/ns/net";
+	int fd;
+
+	if (unshare(CLONE_NEWNET) != 0) {
+		pr_err("unshare()");
+		return -1;
+	}
+
+	fd = open(netns_path, O_RDONLY);
+	if (fd <= 0) {
+		pr_err("open(%s)", netns_path);
+		return -1;
+	}
+
+	return fd;
+}
+
+static int switch_ns(int fd)
+{
+	if (setns(fd, CLONE_NEWNET)) {
+		pr_err("setns()");
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * Running the test inside a new parent net namespace to bother less
+ * about cleanup on error-path.
+ */
+static int init_namespaces(void)
+{
+	nsfd_parent = unshare_open();
+	if (nsfd_parent <= 0)
+		return -1;
+
+	nsfd_childa = unshare_open();
+	if (nsfd_childa <= 0)
+		return -1;
+
+	if (switch_ns(nsfd_parent))
+		return -1;
+
+	nsfd_childb = unshare_open();
+	if (nsfd_childb <= 0)
+		return -1;
+
+	if (switch_ns(nsfd_parent))
+		return -1;
+	return 0;
+}
+
+static int netlink_sock(int *sock, uint32_t *seq_nr, int proto)
+{
+	if (*sock > 0) {
+		seq_nr++;
+		return 0;
+	}
+
+	*sock = socket(AF_NETLINK, SOCK_RAW | SOCK_CLOEXEC, proto);
+	if (*sock <= 0) {
+		pr_err("socket(AF_NETLINK)");
+		return -1;
+	}
+
+	randomize_buffer(seq_nr, sizeof(*seq_nr));
+
+	return 0;
+}
+
+static inline struct rtattr *rtattr_hdr(struct nlmsghdr *nh)
+{
+	return (struct rtattr *)((char *)(nh) + RTA_ALIGN((nh)->nlmsg_len));
+}
+
+static int rtattr_pack(struct nlmsghdr *nh, size_t req_sz,
+		unsigned short rta_type, const void *payload, size_t size)
+{
+	/* NLMSG_ALIGNTO == RTA_ALIGNTO, nlmsg_len already aligned */
+	struct rtattr *attr = rtattr_hdr(nh);
+	size_t nl_size = RTA_ALIGN(nh->nlmsg_len) + RTA_LENGTH(size);
+
+	if (req_sz < nl_size) {
+		printk("req buf is too small: %zu < %zu", req_sz, nl_size);
+		return -1;
+	}
+	nh->nlmsg_len = nl_size;
+
+	attr->rta_len = RTA_LENGTH(size);
+	attr->rta_type = rta_type;
+	memcpy(RTA_DATA(attr), payload, size);
+
+	return 0;
+}
+
+static struct rtattr *_rtattr_begin(struct nlmsghdr *nh, size_t req_sz,
+		unsigned short rta_type, const void *payload, size_t size)
+{
+	struct rtattr *ret = rtattr_hdr(nh);
+
+	if (rtattr_pack(nh, req_sz, rta_type, payload, size))
+		return 0;
+
+	return ret;
+}
+
+static inline struct rtattr *rtattr_begin(struct nlmsghdr *nh, size_t req_sz,
+		unsigned short rta_type)
+{
+	return _rtattr_begin(nh, req_sz, rta_type, 0, 0);
+}
+
+static inline void rtattr_end(struct nlmsghdr *nh, struct rtattr *attr)
+{
+	char *nlmsg_end = (char *)nh + nh->nlmsg_len;
+
+	attr->rta_len = nlmsg_end - (char *)attr;
+}
+
+static int veth_pack_peerb(struct nlmsghdr *nh, size_t req_sz,
+		const char *peer, int ns)
+{
+	struct ifinfomsg pi;
+	struct rtattr *peer_attr;
+
+	memset(&pi, 0, sizeof(pi));
+	pi.ifi_family	= AF_UNSPEC;
+	pi.ifi_change	= 0xFFFFFFFF;
+
+	peer_attr = _rtattr_begin(nh, req_sz, VETH_INFO_PEER, &pi, sizeof(pi));
+	if (!peer_attr)
+		return -1;
+
+	if (rtattr_pack(nh, req_sz, IFLA_IFNAME, peer, strlen(peer)))
+		return -1;
+
+	if (rtattr_pack(nh, req_sz, IFLA_NET_NS_FD, &ns, sizeof(ns)))
+		return -1;
+
+	rtattr_end(nh, peer_attr);
+
+	return 0;
+}
+
+static int netlink_check_answer(int sock)
+{
+	struct nlmsgerror {
+		struct nlmsghdr hdr;
+		int error;
+		struct nlmsghdr orig_msg;
+	} answer;
+
+	if (recv(sock, &answer, sizeof(answer), 0) < 0) {
+		pr_err("recv()");
+		return -1;
+	} else if (answer.hdr.nlmsg_type != NLMSG_ERROR) {
+		printk("expected NLMSG_ERROR, got %d", (int)answer.hdr.nlmsg_type);
+		return -1;
+	} else if (answer.error) {
+		printk("NLMSG_ERROR: %d: %s",
+			answer.error, strerror(-answer.error));
+		return answer.error;
+	}
+
+	return 0;
+}
+
+static int veth_add(int sock, uint32_t seq, const char *peera, int ns_a,
+		const char *peerb, int ns_b)
+{
+	uint16_t flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_EXCL | NLM_F_CREATE;
+	struct {
+		struct nlmsghdr		nh;
+		struct ifinfomsg	info;
+		char			attrbuf[MAX_PAYLOAD];
+	} req;
+	const char veth_type[] = "veth";
+	struct rtattr *link_info, *info_data;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.info));
+	req.nh.nlmsg_type	= RTM_NEWLINK;
+	req.nh.nlmsg_flags	= flags;
+	req.nh.nlmsg_seq	= seq;
+	req.info.ifi_family	= AF_UNSPEC;
+	req.info.ifi_change	= 0xFFFFFFFF;
+
+	if (rtattr_pack(&req.nh, sizeof(req), IFLA_IFNAME, peera, strlen(peera)))
+		return -1;
+
+	if (rtattr_pack(&req.nh, sizeof(req), IFLA_NET_NS_FD, &ns_a, sizeof(ns_a)))
+		return -1;
+
+	link_info = rtattr_begin(&req.nh, sizeof(req), IFLA_LINKINFO);
+	if (!link_info)
+		return -1;
+
+	if (rtattr_pack(&req.nh, sizeof(req), IFLA_INFO_KIND, veth_type, sizeof(veth_type)))
+		return -1;
+
+	info_data = rtattr_begin(&req.nh, sizeof(req), IFLA_INFO_DATA);
+	if (!info_data)
+		return -1;
+
+	if (veth_pack_peerb(&req.nh, sizeof(req), peerb, ns_b))
+		return -1;
+
+	rtattr_end(&req.nh, info_data);
+	rtattr_end(&req.nh, link_info);
+
+	if (send(sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+	return netlink_check_answer(sock);
+}
+
+static int ip4_addr_set(int sock, uint32_t seq, const char *intf,
+		struct in_addr addr, uint8_t prefix)
+{
+	uint16_t flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_EXCL | NLM_F_CREATE;
+	struct {
+		struct nlmsghdr		nh;
+		struct ifaddrmsg	info;
+		char			attrbuf[MAX_PAYLOAD];
+	} req;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.info));
+	req.nh.nlmsg_type	= RTM_NEWADDR;
+	req.nh.nlmsg_flags	= flags;
+	req.nh.nlmsg_seq	= seq;
+	req.info.ifa_family	= AF_INET;
+	req.info.ifa_prefixlen	= prefix;
+	req.info.ifa_index	= if_nametoindex(intf);
+
+#ifdef DEBUG
+	{
+		char addr_str[IPV4_STR_SZ] = {};
+
+		strncpy(addr_str, inet_ntoa(addr), IPV4_STR_SZ - 1);
+
+		printk("ip addr set %s", addr_str);
+	}
+#endif
+
+	if (rtattr_pack(&req.nh, sizeof(req), IFA_LOCAL, &addr, sizeof(addr)))
+		return -1;
+
+	if (rtattr_pack(&req.nh, sizeof(req), IFA_ADDRESS, &addr, sizeof(addr)))
+		return -1;
+
+	if (send(sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+	return netlink_check_answer(sock);
+}
+
+static int link_set_up(int sock, uint32_t seq, const char *intf)
+{
+	struct {
+		struct nlmsghdr		nh;
+		struct ifinfomsg	info;
+		char			attrbuf[MAX_PAYLOAD];
+	} req;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.info));
+	req.nh.nlmsg_type	= RTM_NEWLINK;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK;
+	req.nh.nlmsg_seq	= seq;
+	req.info.ifi_family	= AF_UNSPEC;
+	req.info.ifi_change	= 0xFFFFFFFF;
+	req.info.ifi_index	= if_nametoindex(intf);
+	req.info.ifi_flags	= IFF_UP;
+	req.info.ifi_change	= IFF_UP;
+
+	if (send(sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+	return netlink_check_answer(sock);
+}
+
+static int ip4_route_set(int sock, uint32_t seq, const char *intf,
+		struct in_addr src, struct in_addr dst)
+{
+	struct {
+		struct nlmsghdr	nh;
+		struct rtmsg	rt;
+		char		attrbuf[MAX_PAYLOAD];
+	} req;
+	unsigned int index = if_nametoindex(intf);
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.rt));
+	req.nh.nlmsg_type	= RTM_NEWROUTE;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK | NLM_F_CREATE;
+	req.nh.nlmsg_seq	= seq;
+	req.rt.rtm_family	= AF_INET;
+	req.rt.rtm_dst_len	= 32;
+	req.rt.rtm_table	= RT_TABLE_MAIN;
+	req.rt.rtm_protocol	= RTPROT_BOOT;
+	req.rt.rtm_scope	= RT_SCOPE_LINK;
+	req.rt.rtm_type		= RTN_UNICAST;
+
+	if (rtattr_pack(&req.nh, sizeof(req), RTA_DST, &dst, sizeof(dst)))
+		return -1;
+
+	if (rtattr_pack(&req.nh, sizeof(req), RTA_PREFSRC, &src, sizeof(src)))
+		return -1;
+
+	if (rtattr_pack(&req.nh, sizeof(req), RTA_OIF, &index, sizeof(index)))
+		return -1;
+
+	if (send(sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+
+	return netlink_check_answer(sock);
+}
+
+static int tunnel_set_route(int route_sock, uint32_t *route_seq, char *veth,
+		struct in_addr tunsrc, struct in_addr tundst)
+{
+	if (ip4_addr_set(route_sock, (*route_seq)++, "lo",
+			tunsrc, PREFIX_LEN)) {
+		printk("Failed to set ipv4 addr");
+		return -1;
+	}
+
+	if (ip4_route_set(route_sock, (*route_seq)++, veth, tunsrc, tundst)) {
+		printk("Failed to set ipv4 route");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int init_child(int nsfd, char *veth, unsigned int src, unsigned int dst)
+{
+	struct in_addr intsrc = inet_makeaddr(INADDR_B, src);
+	struct in_addr tunsrc = inet_makeaddr(INADDR_A, src);
+	struct in_addr tundst = inet_makeaddr(INADDR_A, dst);
+	int route_sock = -1, ret = -1;
+	uint32_t route_seq;
+
+	if (switch_ns(nsfd))
+		return -1;
+
+	if (netlink_sock(&route_sock, &route_seq, NETLINK_ROUTE)) {
+		printk("Failed to open netlink route socket in child");
+		return -1;
+	}
+
+	if (ip4_addr_set(route_sock, route_seq++, veth, intsrc, PREFIX_LEN)) {
+		printk("Failed to set ipv4 addr");
+		goto err;
+	}
+
+	if (link_set_up(route_sock, route_seq++, veth)) {
+		printk("Failed to bring up %s", veth);
+		goto err;
+	}
+
+	if (tunnel_set_route(route_sock, &route_seq, veth, tunsrc, tundst)) {
+		printk("Failed to add tunnel route on %s", veth);
+		goto err;
+	}
+	ret = 0;
+
+err:
+	close(route_sock);
+	return ret;
+}
+
+#define ALGO_LEN	64
+enum desc_type {
+	CREATE_TUNNEL	= 0,
+	ALLOCATE_SPI,
+	MONITOR_ACQUIRE,
+	EXPIRE_STATE,
+	EXPIRE_POLICY,
+};
+const char *desc_name[] = {
+	"create tunnel",
+	"alloc spi",
+	"monitor acquire",
+	"expire state",
+	"expire policy"
+};
+struct xfrm_desc {
+	enum desc_type	type;
+	uint8_t		proto;
+	char		a_algo[ALGO_LEN];
+	char		e_algo[ALGO_LEN];
+	char		c_algo[ALGO_LEN];
+	char		ae_algo[ALGO_LEN];
+	unsigned int	icv_len;
+	/* unsigned key_len; */
+};
+
+enum msg_type {
+	MSG_ACK		= 0,
+	MSG_EXIT,
+	MSG_PING,
+	MSG_XFRM_PREPARE,
+	MSG_XFRM_ADD,
+	MSG_XFRM_DEL,
+	MSG_XFRM_CLEANUP,
+};
+
+struct test_desc {
+	enum msg_type type;
+	union {
+		struct {
+			in_addr_t reply_ip;
+			unsigned int port;
+		} ping;
+		struct xfrm_desc xfrm_desc;
+	} body;
+};
+
+struct test_result {
+	struct xfrm_desc desc;
+	unsigned int res;
+};
+
+static void write_test_result(unsigned int res, struct xfrm_desc *d)
+{
+	struct test_result tr = {};
+	ssize_t ret;
+
+	tr.desc = *d;
+	tr.res = res;
+
+	ret = write(results_fd[1], &tr, sizeof(tr));
+	if (ret != sizeof(tr))
+		pr_err("Failed to write the result in pipe %zd", ret);
+}
+
+static void write_msg(int fd, struct test_desc *msg, bool exit_of_fail)
+{
+	ssize_t bytes = write(fd, msg, sizeof(*msg));
+
+	/* Make sure that write/read is atomic to a pipe */
+	BUILD_BUG_ON(sizeof(struct test_desc) > PIPE_BUF);
+
+	if (bytes < 0) {
+		pr_err("write()");
+		if (exit_of_fail)
+			exit(KSFT_FAIL);
+	}
+	if (bytes != sizeof(*msg)) {
+		pr_err("sent part of the message %zd/%zu", bytes, sizeof(*msg));
+		if (exit_of_fail)
+			exit(KSFT_FAIL);
+	}
+}
+
+static void read_msg(int fd, struct test_desc *msg, bool exit_of_fail)
+{
+	ssize_t bytes = read(fd, msg, sizeof(*msg));
+
+	if (bytes < 0) {
+		pr_err("read()");
+		if (exit_of_fail)
+			exit(KSFT_FAIL);
+	}
+	if (bytes != sizeof(*msg)) {
+		pr_err("got incomplete message %zd/%zu", bytes, sizeof(*msg));
+		if (exit_of_fail)
+			exit(KSFT_FAIL);
+	}
+}
+
+static int udp_ping_init(struct in_addr listen_ip, unsigned int u_timeout,
+		unsigned int *server_port, int sock[2])
+{
+	struct sockaddr_in server;
+	struct timeval t = { .tv_sec = 0, .tv_usec = u_timeout };
+	socklen_t s_len = sizeof(server);
+
+	sock[0] = socket(AF_INET, SOCK_DGRAM, 0);
+	if (sock[0] < 0) {
+		pr_err("socket()");
+		return -1;
+	}
+
+	server.sin_family	= AF_INET;
+	server.sin_port		= 0;
+	memcpy(&server.sin_addr.s_addr, &listen_ip, sizeof(struct in_addr));
+
+	if (bind(sock[0], (struct sockaddr *)&server, s_len)) {
+		pr_err("bind()");
+		goto err_close_server;
+	}
+
+	if (getsockname(sock[0], (struct sockaddr *)&server, &s_len)) {
+		pr_err("getsockname()");
+		goto err_close_server;
+	}
+
+	*server_port = ntohs(server.sin_port);
+
+	if (setsockopt(sock[0], SOL_SOCKET, SO_RCVTIMEO, (const char *)&t, sizeof t)) {
+		pr_err("setsockopt()");
+		goto err_close_server;
+	}
+
+	sock[1] = socket(AF_INET, SOCK_DGRAM, 0);
+	if (sock[1] < 0) {
+		pr_err("socket()");
+		goto err_close_server;
+	}
+
+	return 0;
+
+err_close_server:
+	close(sock[0]);
+	return -1;
+}
+
+static int udp_ping_send(int sock[2], in_addr_t dest_ip, unsigned int port,
+		char *buf, size_t buf_len)
+{
+	struct sockaddr_in server;
+	const struct sockaddr *dest_addr = (struct sockaddr *)&server;
+	char *sock_buf[buf_len];
+	ssize_t r_bytes, s_bytes;
+
+	server.sin_family	= AF_INET;
+	server.sin_port		= htons(port);
+	server.sin_addr.s_addr	= dest_ip;
+
+	s_bytes = sendto(sock[1], buf, buf_len, 0, dest_addr, sizeof(server));
+	if (s_bytes < 0) {
+		pr_err("sendto()");
+		return -1;
+	} else if (s_bytes != buf_len) {
+		printk("send part of the message: %zd/%zu", s_bytes, sizeof(server));
+		return -1;
+	}
+
+	r_bytes = recv(sock[0], sock_buf, buf_len, 0);
+	if (r_bytes < 0) {
+		if (errno != EAGAIN)
+			pr_err("recv()");
+		return -1;
+	} else if (r_bytes == 0) { /* EOF */
+		printk("EOF on reply to ping");
+		return -1;
+	} else if (r_bytes != buf_len || memcmp(buf, sock_buf, buf_len)) {
+		printk("ping reply packet is corrupted %zd/%zu", r_bytes, buf_len);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int udp_ping_reply(int sock[2], in_addr_t dest_ip, unsigned int port,
+		char *buf, size_t buf_len)
+{
+	struct sockaddr_in server;
+	const struct sockaddr *dest_addr = (struct sockaddr *)&server;
+	char *sock_buf[buf_len];
+	ssize_t r_bytes, s_bytes;
+
+	server.sin_family	= AF_INET;
+	server.sin_port		= htons(port);
+	server.sin_addr.s_addr	= dest_ip;
+
+	r_bytes = recv(sock[0], sock_buf, buf_len, 0);
+	if (r_bytes < 0) {
+		if (errno != EAGAIN)
+			pr_err("recv()");
+		return -1;
+	}
+	if (r_bytes == 0) { /* EOF */
+		printk("EOF on reply to ping");
+		return -1;
+	}
+	if (r_bytes != buf_len || memcmp(buf, sock_buf, buf_len)) {
+		printk("ping reply packet is corrupted %zd/%zu", r_bytes, buf_len);
+		return -1;
+	}
+
+	s_bytes = sendto(sock[1], buf, buf_len, 0, dest_addr, sizeof(server));
+	if (s_bytes < 0) {
+		pr_err("sendto()");
+		return -1;
+	} else if (s_bytes != buf_len) {
+		printk("send part of the message: %zd/%zu", s_bytes, sizeof(server));
+		return -1;
+	}
+
+	return 0;
+}
+
+typedef int (*ping_f)(int sock[2], in_addr_t dest_ip, unsigned int port,
+		char *buf, size_t buf_len);
+static int do_ping(int cmd_fd, char *buf, size_t buf_len, struct in_addr from,
+		bool init_side, int d_port, in_addr_t to, ping_f func)
+{
+	struct test_desc msg;
+	unsigned int s_port, i, ping_succeeded = 0;
+	int ping_sock[2];
+	char to_str[IPV4_STR_SZ] = {}, from_str[IPV4_STR_SZ] = {};
+
+	if (udp_ping_init(from, ping_timeout, &s_port, ping_sock)) {
+		printk("Failed to init ping");
+		return -1;
+	}
+
+	memset(&msg, 0, sizeof(msg));
+	msg.type		= MSG_PING;
+	msg.body.ping.port	= s_port;
+	memcpy(&msg.body.ping.reply_ip, &from, sizeof(from));
+
+	write_msg(cmd_fd, &msg, 0);
+	if (init_side) {
+		/* The other end sends ip to ping */
+		read_msg(cmd_fd, &msg, 0);
+		if (msg.type != MSG_PING)
+			return -1;
+		to = msg.body.ping.reply_ip;
+		d_port = msg.body.ping.port;
+	}
+
+	for (i = 0; i < ping_count ; i++) {
+		struct timespec sleep_time = {
+			.tv_sec = 0,
+			.tv_nsec = ping_delay_nsec,
+		};
+
+		ping_succeeded += !func(ping_sock, to, d_port, buf, page_size);
+		nanosleep(&sleep_time, 0);
+	}
+
+	close(ping_sock[0]);
+	close(ping_sock[1]);
+
+	strncpy(to_str, inet_ntoa(*(struct in_addr *)&to), IPV4_STR_SZ - 1);
+	strncpy(from_str, inet_ntoa(from), IPV4_STR_SZ - 1);
+
+	if (ping_succeeded < ping_success) {
+		printk("ping (%s) %s->%s failed %u/%u times",
+			init_side ? "send" : "reply", from_str, to_str,
+			ping_count - ping_succeeded, ping_count);
+		return -1;
+	}
+
+#ifdef DEBUG
+	printk("ping (%s) %s->%s succeeded %u/%u times",
+		init_side ? "send" : "reply", from_str, to_str,
+		ping_succeeded, ping_count);
+#endif
+
+	return 0;
+}
+
+static int xfrm_fill_key(char *name, char *buf,
+		size_t buf_len, unsigned int *key_len)
+{
+	/* TODO: use set/map instead */
+	if (strncmp(name, "digest_null", ALGO_LEN) == 0)
+		*key_len = 0;
+	else if (strncmp(name, "ecb(cipher_null)", ALGO_LEN) == 0)
+		*key_len = 0;
+	else if (strncmp(name, "cbc(des)", ALGO_LEN) == 0)
+		*key_len = 64;
+	else if (strncmp(name, "hmac(md5)", ALGO_LEN) == 0)
+		*key_len = 128;
+	else if (strncmp(name, "cmac(aes)", ALGO_LEN) == 0)
+		*key_len = 128;
+	else if (strncmp(name, "xcbc(aes)", ALGO_LEN) == 0)
+		*key_len = 128;
+	else if (strncmp(name, "cbc(cast5)", ALGO_LEN) == 0)
+		*key_len = 128;
+	else if (strncmp(name, "cbc(serpent)", ALGO_LEN) == 0)
+		*key_len = 128;
+	else if (strncmp(name, "hmac(sha1)", ALGO_LEN) == 0)
+		*key_len = 160;
+	else if (strncmp(name, "hmac(rmd160)", ALGO_LEN) == 0)
+		*key_len = 160;
+	else if (strncmp(name, "cbc(des3_ede)", ALGO_LEN) == 0)
+		*key_len = 192;
+	else if (strncmp(name, "hmac(sha256)", ALGO_LEN) == 0)
+		*key_len = 256;
+	else if (strncmp(name, "cbc(aes)", ALGO_LEN) == 0)
+		*key_len = 256;
+	else if (strncmp(name, "cbc(camellia)", ALGO_LEN) == 0)
+		*key_len = 256;
+	else if (strncmp(name, "cbc(twofish)", ALGO_LEN) == 0)
+		*key_len = 256;
+	else if (strncmp(name, "rfc3686(ctr(aes))", ALGO_LEN) == 0)
+		*key_len = 288;
+	else if (strncmp(name, "hmac(sha384)", ALGO_LEN) == 0)
+		*key_len = 384;
+	else if (strncmp(name, "cbc(blowfish)", ALGO_LEN) == 0)
+		*key_len = 448;
+	else if (strncmp(name, "hmac(sha512)", ALGO_LEN) == 0)
+		*key_len = 512;
+	else if (strncmp(name, "rfc4106(gcm(aes))-128", ALGO_LEN) == 0)
+		*key_len = 160;
+	else if (strncmp(name, "rfc4543(gcm(aes))-128", ALGO_LEN) == 0)
+		*key_len = 160;
+	else if (strncmp(name, "rfc4309(ccm(aes))-128", ALGO_LEN) == 0)
+		*key_len = 152;
+	else if (strncmp(name, "rfc4106(gcm(aes))-192", ALGO_LEN) == 0)
+		*key_len = 224;
+	else if (strncmp(name, "rfc4543(gcm(aes))-192", ALGO_LEN) == 0)
+		*key_len = 224;
+	else if (strncmp(name, "rfc4309(ccm(aes))-192", ALGO_LEN) == 0)
+		*key_len = 216;
+	else if (strncmp(name, "rfc4106(gcm(aes))-256", ALGO_LEN) == 0)
+		*key_len = 288;
+	else if (strncmp(name, "rfc4543(gcm(aes))-256", ALGO_LEN) == 0)
+		*key_len = 288;
+	else if (strncmp(name, "rfc4309(ccm(aes))-256", ALGO_LEN) == 0)
+		*key_len = 280;
+	else if (strncmp(name, "rfc7539(chacha20,poly1305)-128", ALGO_LEN) == 0)
+		*key_len = 0;
+
+	if (*key_len > buf_len) {
+		printk("Can't pack a key - too big for buffer");
+		return -1;
+	}
+
+	randomize_buffer(buf, *key_len);
+
+	return 0;
+}
+
+static int xfrm_state_pack_algo(struct nlmsghdr *nh, size_t req_sz,
+		struct xfrm_desc *desc)
+{
+	struct {
+		union {
+			struct xfrm_algo	alg;
+			struct xfrm_algo_aead	aead;
+			struct xfrm_algo_auth	auth;
+		} u;
+		char buf[XFRM_ALGO_KEY_BUF_SIZE];
+	} alg = {};
+	size_t alen, elen, clen, aelen;
+	unsigned short type;
+
+	alen = strlen(desc->a_algo);
+	elen = strlen(desc->e_algo);
+	clen = strlen(desc->c_algo);
+	aelen = strlen(desc->ae_algo);
+
+	/* Verify desc */
+	switch (desc->proto) {
+	case IPPROTO_AH:
+		if (!alen || elen || clen || aelen) {
+			printk("BUG: buggy ah desc");
+			return -1;
+		}
+		strncpy(alg.u.alg.alg_name, desc->a_algo, ALGO_LEN - 1);
+		if (xfrm_fill_key(desc->a_algo, alg.u.alg.alg_key,
+				sizeof(alg.buf), &alg.u.alg.alg_key_len))
+			return -1;
+		type = XFRMA_ALG_AUTH;
+		break;
+	case IPPROTO_COMP:
+		if (!clen || elen || alen || aelen) {
+			printk("BUG: buggy comp desc");
+			return -1;
+		}
+		strncpy(alg.u.alg.alg_name, desc->c_algo, ALGO_LEN - 1);
+		if (xfrm_fill_key(desc->c_algo, alg.u.alg.alg_key,
+				sizeof(alg.buf), &alg.u.alg.alg_key_len))
+			return -1;
+		type = XFRMA_ALG_COMP;
+		break;
+	case IPPROTO_ESP:
+		if (!((alen && elen) ^ aelen) || clen) {
+			printk("BUG: buggy esp desc");
+			return -1;
+		}
+		if (aelen) {
+			alg.u.aead.alg_icv_len = desc->icv_len;
+			strncpy(alg.u.aead.alg_name, desc->ae_algo, ALGO_LEN - 1);
+			if (xfrm_fill_key(desc->ae_algo, alg.u.aead.alg_key,
+						sizeof(alg.buf), &alg.u.aead.alg_key_len))
+				return -1;
+			type = XFRMA_ALG_AEAD;
+		} else {
+
+			strncpy(alg.u.alg.alg_name, desc->e_algo, ALGO_LEN - 1);
+			type = XFRMA_ALG_CRYPT;
+			if (xfrm_fill_key(desc->e_algo, alg.u.alg.alg_key,
+						sizeof(alg.buf), &alg.u.alg.alg_key_len))
+				return -1;
+			if (rtattr_pack(nh, req_sz, type, &alg, sizeof(alg)))
+				return -1;
+
+			strncpy(alg.u.alg.alg_name, desc->a_algo, ALGO_LEN);
+			type = XFRMA_ALG_AUTH;
+			if (xfrm_fill_key(desc->a_algo, alg.u.alg.alg_key,
+						sizeof(alg.buf), &alg.u.alg.alg_key_len))
+				return -1;
+		}
+		break;
+	default:
+		printk("BUG: unknown proto in desc");
+		return -1;
+	}
+
+	if (rtattr_pack(nh, req_sz, type, &alg, sizeof(alg)))
+		return -1;
+
+	return 0;
+}
+
+static inline uint32_t gen_spi(struct in_addr src)
+{
+	return htonl(inet_lnaof(src));
+}
+
+static int xfrm_state_add(int xfrm_sock, uint32_t seq, uint32_t spi,
+		struct in_addr src, struct in_addr dst,
+		struct xfrm_desc *desc)
+{
+	struct {
+		struct nlmsghdr		nh;
+		struct xfrm_usersa_info	info;
+		char			attrbuf[MAX_PAYLOAD];
+	} req;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.info));
+	req.nh.nlmsg_type	= XFRM_MSG_NEWSA;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK;
+	req.nh.nlmsg_seq	= seq;
+
+	/* Fill selector. */
+	memcpy(&req.info.sel.daddr, &dst, sizeof(dst));
+	memcpy(&req.info.sel.saddr, &src, sizeof(src));
+	req.info.sel.family		= AF_INET;
+	req.info.sel.prefixlen_d	= PREFIX_LEN;
+	req.info.sel.prefixlen_s	= PREFIX_LEN;
+
+	/* Fill id */
+	memcpy(&req.info.id.daddr, &dst, sizeof(dst));
+	/* Note: zero-spi cannot be deleted */
+	req.info.id.spi = spi;
+	req.info.id.proto	= desc->proto;
+
+	memcpy(&req.info.saddr, &src, sizeof(src));
+
+	/* Fill lifteme_cfg */
+	req.info.lft.soft_byte_limit	= XFRM_INF;
+	req.info.lft.hard_byte_limit	= XFRM_INF;
+	req.info.lft.soft_packet_limit	= XFRM_INF;
+	req.info.lft.hard_packet_limit	= XFRM_INF;
+
+	req.info.family		= AF_INET;
+	req.info.mode		= XFRM_MODE_TUNNEL;
+
+	if (xfrm_state_pack_algo(&req.nh, sizeof(req), desc))
+		return -1;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+
+	return netlink_check_answer(xfrm_sock);
+}
+
+static bool xfrm_usersa_found(struct xfrm_usersa_info *info, uint32_t spi,
+		struct in_addr src, struct in_addr dst,
+		struct xfrm_desc *desc)
+{
+	if (memcmp(&info->sel.daddr, &dst, sizeof(dst)))
+		return false;
+
+	if (memcmp(&info->sel.saddr, &src, sizeof(src)))
+		return false;
+
+	if (info->sel.family != AF_INET					||
+			info->sel.prefixlen_d != PREFIX_LEN		||
+			info->sel.prefixlen_s != PREFIX_LEN)
+		return false;
+
+	if (info->id.spi != spi || info->id.proto != desc->proto)
+		return false;
+
+	if (memcmp(&info->id.daddr, &dst, sizeof(dst)))
+		return false;
+
+	if (memcmp(&info->saddr, &src, sizeof(src)))
+		return false;
+
+	if (info->lft.soft_byte_limit != XFRM_INF			||
+			info->lft.hard_byte_limit != XFRM_INF		||
+			info->lft.soft_packet_limit != XFRM_INF		||
+			info->lft.hard_packet_limit != XFRM_INF)
+		return false;
+
+	if (info->family != AF_INET || info->mode != XFRM_MODE_TUNNEL)
+		return false;
+
+	/* XXX: check xfrm algo, see xfrm_state_pack_algo(). */
+
+	return true;
+}
+
+static int xfrm_state_check(int xfrm_sock, uint32_t seq, uint32_t spi,
+		struct in_addr src, struct in_addr dst,
+		struct xfrm_desc *desc)
+{
+	struct {
+		struct nlmsghdr		nh;
+		char			attrbuf[MAX_PAYLOAD];
+	} req;
+	struct {
+		struct nlmsghdr		nh;
+		union {
+			struct xfrm_usersa_info	info;
+			int error;
+		};
+		char			attrbuf[MAX_PAYLOAD];
+	} answer;
+	struct xfrm_address_filter filter = {};
+	bool found = false;
+
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(0);
+	req.nh.nlmsg_type	= XFRM_MSG_GETSA;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_DUMP;
+	req.nh.nlmsg_seq	= seq;
+
+	/*
+	 * Add dump filter by source address as there may be other tunnels
+	 * in this netns (if tests run in parallel).
+	 */
+	filter.family = AF_INET;
+	filter.splen = 0x1f;	/* 0xffffffff mask see addr_match() */
+	memcpy(&filter.saddr, &src, sizeof(src));
+	if (rtattr_pack(&req.nh, sizeof(req), XFRMA_ADDRESS_FILTER,
+				&filter, sizeof(filter)))
+		return -1;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+
+	while (1) {
+		if (recv(xfrm_sock, &answer, sizeof(answer), 0) < 0) {
+			pr_err("recv()");
+			return -1;
+		}
+		if (answer.nh.nlmsg_type == NLMSG_ERROR) {
+			printk("NLMSG_ERROR: %d: %s",
+				answer.error, strerror(-answer.error));
+			return -1;
+		} else if (answer.nh.nlmsg_type == NLMSG_DONE) {
+			if (found)
+				return 0;
+			printk("didn't find allocated xfrm state in dump");
+			return -1;
+		} else if (answer.nh.nlmsg_type == XFRM_MSG_NEWSA) {
+			if (xfrm_usersa_found(&answer.info, spi, src, dst, desc))
+				found = true;
+		}
+	}
+}
+
+static int xfrm_set(int xfrm_sock, uint32_t *seq,
+		struct in_addr src, struct in_addr dst,
+		struct in_addr tunsrc, struct in_addr tundst,
+		struct xfrm_desc *desc)
+{
+	int err;
+
+	err = xfrm_state_add(xfrm_sock, (*seq)++, gen_spi(src), src, dst, desc);
+	if (err) {
+		printk("Failed to add xfrm state");
+		return -1;
+	}
+
+	err = xfrm_state_add(xfrm_sock, (*seq)++, gen_spi(src), dst, src, desc);
+	if (err) {
+		printk("Failed to add xfrm state");
+		return -1;
+	}
+
+	/* Check dumps for XFRM_MSG_GETSA */
+	err = xfrm_state_check(xfrm_sock, (*seq)++, gen_spi(src), src, dst, desc);
+	err |= xfrm_state_check(xfrm_sock, (*seq)++, gen_spi(src), dst, src, desc);
+	if (err) {
+		printk("Failed to check xfrm state");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int xfrm_policy_add(int xfrm_sock, uint32_t seq, uint32_t spi,
+		struct in_addr src, struct in_addr dst, uint8_t dir,
+		struct in_addr tunsrc, struct in_addr tundst, uint8_t proto)
+{
+	struct {
+		struct nlmsghdr			nh;
+		struct xfrm_userpolicy_info	info;
+		char				attrbuf[MAX_PAYLOAD];
+	} req;
+	struct xfrm_user_tmpl tmpl;
+
+	memset(&req, 0, sizeof(req));
+	memset(&tmpl, 0, sizeof(tmpl));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.info));
+	req.nh.nlmsg_type	= XFRM_MSG_NEWPOLICY;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK;
+	req.nh.nlmsg_seq	= seq;
+
+	/* Fill selector. */
+	memcpy(&req.info.sel.daddr, &dst, sizeof(tundst));
+	memcpy(&req.info.sel.saddr, &src, sizeof(tunsrc));
+	req.info.sel.family		= AF_INET;
+	req.info.sel.prefixlen_d	= PREFIX_LEN;
+	req.info.sel.prefixlen_s	= PREFIX_LEN;
+
+	/* Fill lifteme_cfg */
+	req.info.lft.soft_byte_limit	= XFRM_INF;
+	req.info.lft.hard_byte_limit	= XFRM_INF;
+	req.info.lft.soft_packet_limit	= XFRM_INF;
+	req.info.lft.hard_packet_limit	= XFRM_INF;
+
+	req.info.dir = dir;
+
+	/* Fill tmpl */
+	memcpy(&tmpl.id.daddr, &dst, sizeof(dst));
+	/* Note: zero-spi cannot be deleted */
+	tmpl.id.spi = spi;
+	tmpl.id.proto	= proto;
+	tmpl.family	= AF_INET;
+	memcpy(&tmpl.saddr, &src, sizeof(src));
+	tmpl.mode	= XFRM_MODE_TUNNEL;
+	tmpl.aalgos = (~(uint32_t)0);
+	tmpl.ealgos = (~(uint32_t)0);
+	tmpl.calgos = (~(uint32_t)0);
+
+	if (rtattr_pack(&req.nh, sizeof(req), XFRMA_TMPL, &tmpl, sizeof(tmpl)))
+		return -1;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+
+	return netlink_check_answer(xfrm_sock);
+}
+
+static int xfrm_prepare(int xfrm_sock, uint32_t *seq,
+		struct in_addr src, struct in_addr dst,
+		struct in_addr tunsrc, struct in_addr tundst, uint8_t proto)
+{
+	if (xfrm_policy_add(xfrm_sock, (*seq)++, gen_spi(src), src, dst,
+				XFRM_POLICY_OUT, tunsrc, tundst, proto)) {
+		printk("Failed to add xfrm policy");
+		return -1;
+	}
+
+	if (xfrm_policy_add(xfrm_sock, (*seq)++, gen_spi(src), dst, src,
+				XFRM_POLICY_IN, tunsrc, tundst, proto)) {
+		printk("Failed to add xfrm policy");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int xfrm_policy_del(int xfrm_sock, uint32_t seq,
+		struct in_addr src, struct in_addr dst, uint8_t dir,
+		struct in_addr tunsrc, struct in_addr tundst)
+{
+	struct {
+		struct nlmsghdr			nh;
+		struct xfrm_userpolicy_id	id;
+		char				attrbuf[MAX_PAYLOAD];
+	} req;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.id));
+	req.nh.nlmsg_type	= XFRM_MSG_DELPOLICY;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK;
+	req.nh.nlmsg_seq	= seq;
+
+	/* Fill id */
+	memcpy(&req.id.sel.daddr, &dst, sizeof(tundst));
+	memcpy(&req.id.sel.saddr, &src, sizeof(tunsrc));
+	req.id.sel.family		= AF_INET;
+	req.id.sel.prefixlen_d		= PREFIX_LEN;
+	req.id.sel.prefixlen_s		= PREFIX_LEN;
+	req.id.dir = dir;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+
+	return netlink_check_answer(xfrm_sock);
+}
+
+static int xfrm_cleanup(int xfrm_sock, uint32_t *seq,
+		struct in_addr src, struct in_addr dst,
+		struct in_addr tunsrc, struct in_addr tundst)
+{
+	if (xfrm_policy_del(xfrm_sock, (*seq)++, src, dst,
+				XFRM_POLICY_OUT, tunsrc, tundst)) {
+		printk("Failed to add xfrm policy");
+		return -1;
+	}
+
+	if (xfrm_policy_del(xfrm_sock, (*seq)++, dst, src,
+				XFRM_POLICY_IN, tunsrc, tundst)) {
+		printk("Failed to add xfrm policy");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int xfrm_state_del(int xfrm_sock, uint32_t seq, uint32_t spi,
+		struct in_addr src, struct in_addr dst, uint8_t proto)
+{
+	struct {
+		struct nlmsghdr		nh;
+		struct xfrm_usersa_id	id;
+		char			attrbuf[MAX_PAYLOAD];
+	} req;
+	xfrm_address_t saddr = {};
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.id));
+	req.nh.nlmsg_type	= XFRM_MSG_DELSA;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK;
+	req.nh.nlmsg_seq	= seq;
+
+	memcpy(&req.id.daddr, &dst, sizeof(dst));
+	req.id.family		= AF_INET;
+	req.id.proto		= proto;
+	/* Note: zero-spi cannot be deleted */
+	req.id.spi = spi;
+
+	memcpy(&saddr, &src, sizeof(src));
+	if (rtattr_pack(&req.nh, sizeof(req), XFRMA_SRCADDR, &saddr, sizeof(saddr)))
+		return -1;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return -1;
+	}
+
+	return netlink_check_answer(xfrm_sock);
+}
+
+static int xfrm_delete(int xfrm_sock, uint32_t *seq,
+		struct in_addr src, struct in_addr dst,
+		struct in_addr tunsrc, struct in_addr tundst, uint8_t proto)
+{
+	if (xfrm_state_del(xfrm_sock, (*seq)++, gen_spi(src), src, dst, proto)) {
+		printk("Failed to remove xfrm state");
+		return -1;
+	}
+
+	if (xfrm_state_del(xfrm_sock, (*seq)++, gen_spi(src), dst, src, proto)) {
+		printk("Failed to remove xfrm state");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int xfrm_state_allocspi(int xfrm_sock, uint32_t *seq,
+		uint32_t spi, uint8_t proto)
+{
+	struct {
+		struct nlmsghdr			nh;
+		struct xfrm_userspi_info	spi;
+	} req;
+	struct {
+		struct nlmsghdr			nh;
+		union {
+			struct xfrm_usersa_info	info;
+			int error;
+		};
+	} answer;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.spi));
+	req.nh.nlmsg_type	= XFRM_MSG_ALLOCSPI;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST;
+	req.nh.nlmsg_seq	= (*seq)++;
+
+	req.spi.info.family	= AF_INET;
+	req.spi.min		= spi;
+	req.spi.max		= spi;
+	req.spi.info.id.proto	= proto;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		return KSFT_FAIL;
+	}
+
+	if (recv(xfrm_sock, &answer, sizeof(answer), 0) < 0) {
+		pr_err("recv()");
+		return KSFT_FAIL;
+	} else if (answer.nh.nlmsg_type == XFRM_MSG_NEWSA) {
+		uint32_t new_spi = htonl(answer.info.id.spi);
+
+		if (new_spi != spi) {
+			printk("allocated spi is different from requested: %#x != %#x",
+					new_spi, spi);
+			return KSFT_FAIL;
+		}
+		return KSFT_PASS;
+	} else if (answer.nh.nlmsg_type != NLMSG_ERROR) {
+		printk("expected NLMSG_ERROR, got %d", (int)answer.nh.nlmsg_type);
+		return KSFT_FAIL;
+	}
+
+	printk("NLMSG_ERROR: %d: %s", answer.error, strerror(-answer.error));
+	return (answer.error) ? KSFT_FAIL : KSFT_PASS;
+}
+
+static int netlink_sock_bind(int *sock, uint32_t *seq, int proto, uint32_t groups)
+{
+	struct sockaddr_nl snl = {};
+	socklen_t addr_len;
+	int ret = -1;
+
+	snl.nl_family = AF_NETLINK;
+	snl.nl_groups = groups;
+
+	if (netlink_sock(sock, seq, proto)) {
+		printk("Failed to open xfrm netlink socket");
+		return -1;
+	}
+
+	if (bind(*sock, (struct sockaddr *)&snl, sizeof(snl)) < 0) {
+		pr_err("bind()");
+		goto out_close;
+	}
+
+	addr_len = sizeof(snl);
+	if (getsockname(*sock, (struct sockaddr *)&snl, &addr_len) < 0) {
+		pr_err("getsockname()");
+		goto out_close;
+	}
+	if (addr_len != sizeof(snl)) {
+		printk("Wrong address length %d", addr_len);
+		goto out_close;
+	}
+	if (snl.nl_family != AF_NETLINK) {
+		printk("Wrong address family %d", snl.nl_family);
+		goto out_close;
+	}
+	return 0;
+
+out_close:
+	close(*sock);
+	return ret;
+}
+
+static int xfrm_monitor_acquire(int xfrm_sock, uint32_t *seq, unsigned int nr)
+{
+	struct {
+		struct nlmsghdr nh;
+		union {
+			struct xfrm_user_acquire acq;
+			int error;
+		};
+		char attrbuf[MAX_PAYLOAD];
+	} req;
+	struct xfrm_user_tmpl xfrm_tmpl = {};
+	int xfrm_listen = -1, ret = KSFT_FAIL;
+	uint32_t seq_listen;
+
+	if (netlink_sock_bind(&xfrm_listen, &seq_listen, NETLINK_XFRM, XFRMNLGRP_ACQUIRE))
+		return KSFT_FAIL;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.acq));
+	req.nh.nlmsg_type	= XFRM_MSG_ACQUIRE;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK;
+	req.nh.nlmsg_seq	= (*seq)++;
+
+	req.acq.policy.sel.family	= AF_INET;
+	req.acq.aalgos	= 0xfeed;
+	req.acq.ealgos	= 0xbaad;
+	req.acq.calgos	= 0xbabe;
+
+	xfrm_tmpl.family = AF_INET;
+	xfrm_tmpl.id.proto = IPPROTO_ESP;
+	if (rtattr_pack(&req.nh, sizeof(req), XFRMA_TMPL, &xfrm_tmpl, sizeof(xfrm_tmpl)))
+		goto out_close;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		goto out_close;
+	}
+
+	if (recv(xfrm_sock, &req, sizeof(req), 0) < 0) {
+		pr_err("recv()");
+		goto out_close;
+	} else if (req.nh.nlmsg_type != NLMSG_ERROR) {
+		printk("expected NLMSG_ERROR, got %d", (int)req.nh.nlmsg_type);
+		goto out_close;
+	}
+
+	if (req.error) {
+		printk("NLMSG_ERROR: %d: %s", req.error, strerror(-req.error));
+		ret = req.error;
+		goto out_close;
+	}
+
+	if (recv(xfrm_listen, &req, sizeof(req), 0) < 0) {
+		pr_err("recv()");
+		goto out_close;
+	}
+
+	if (req.acq.aalgos != 0xfeed || req.acq.ealgos != 0xbaad
+			|| req.acq.calgos != 0xbabe) {
+		printk("xfrm_user_acquire has changed  %x %x %x",
+				req.acq.aalgos, req.acq.ealgos, req.acq.calgos);
+		goto out_close;
+	}
+
+	ret = KSFT_PASS;
+out_close:
+	close(xfrm_listen);
+	return ret;
+}
+
+static int xfrm_expire_state(int xfrm_sock, uint32_t *seq,
+		unsigned int nr, struct xfrm_desc *desc)
+{
+	struct {
+		struct nlmsghdr nh;
+		union {
+			struct xfrm_user_expire expire;
+			int error;
+		};
+	} req;
+	struct in_addr src, dst;
+	int xfrm_listen = -1, ret = KSFT_FAIL;
+	uint32_t seq_listen;
+
+	src = inet_makeaddr(INADDR_B, child_ip(nr));
+	dst = inet_makeaddr(INADDR_B, grchild_ip(nr));
+
+	if (xfrm_state_add(xfrm_sock, (*seq)++, gen_spi(src), src, dst, desc)) {
+		printk("Failed to add xfrm state");
+		return KSFT_FAIL;
+	}
+
+	if (netlink_sock_bind(&xfrm_listen, &seq_listen, NETLINK_XFRM, XFRMNLGRP_EXPIRE))
+		return KSFT_FAIL;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.expire));
+	req.nh.nlmsg_type	= XFRM_MSG_EXPIRE;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK;
+	req.nh.nlmsg_seq	= (*seq)++;
+
+	memcpy(&req.expire.state.id.daddr, &dst, sizeof(dst));
+	req.expire.state.id.spi		= gen_spi(src);
+	req.expire.state.id.proto	= desc->proto;
+	req.expire.state.family		= AF_INET;
+	req.expire.hard			= 0xff;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		goto out_close;
+	}
+
+	if (recv(xfrm_sock, &req, sizeof(req), 0) < 0) {
+		pr_err("recv()");
+		goto out_close;
+	} else if (req.nh.nlmsg_type != NLMSG_ERROR) {
+		printk("expected NLMSG_ERROR, got %d", (int)req.nh.nlmsg_type);
+		goto out_close;
+	}
+
+	if (req.error) {
+		printk("NLMSG_ERROR: %d: %s", req.error, strerror(-req.error));
+		ret = req.error;
+		goto out_close;
+	}
+
+	if (recv(xfrm_listen, &req, sizeof(req), 0) < 0) {
+		pr_err("recv()");
+		goto out_close;
+	}
+
+	if (req.expire.hard != 0x1) {
+		printk("expire.hard is not set: %x", req.expire.hard);
+		goto out_close;
+	}
+
+	ret = KSFT_PASS;
+out_close:
+	close(xfrm_listen);
+	return ret;
+}
+
+static int xfrm_expire_policy(int xfrm_sock, uint32_t *seq,
+		unsigned int nr, struct xfrm_desc *desc)
+{
+	struct {
+		struct nlmsghdr nh;
+		union {
+			struct xfrm_user_polexpire expire;
+			int error;
+		};
+	} req;
+	struct in_addr src, dst, tunsrc, tundst;
+	int xfrm_listen = -1, ret = KSFT_FAIL;
+	uint32_t seq_listen;
+
+	src = inet_makeaddr(INADDR_B, child_ip(nr));
+	dst = inet_makeaddr(INADDR_B, grchild_ip(nr));
+	tunsrc = inet_makeaddr(INADDR_A, child_ip(nr));
+	tundst = inet_makeaddr(INADDR_A, grchild_ip(nr));
+
+	if (xfrm_policy_add(xfrm_sock, (*seq)++, gen_spi(src), src, dst,
+				XFRM_POLICY_OUT, tunsrc, tundst, desc->proto)) {
+		printk("Failed to add xfrm policy");
+		return KSFT_FAIL;
+	}
+
+	if (netlink_sock_bind(&xfrm_listen, &seq_listen, NETLINK_XFRM, XFRMNLGRP_EXPIRE))
+		return KSFT_FAIL;
+
+	memset(&req, 0, sizeof(req));
+	req.nh.nlmsg_len	= NLMSG_LENGTH(sizeof(req.expire));
+	req.nh.nlmsg_type	= XFRM_MSG_POLEXPIRE;
+	req.nh.nlmsg_flags	= NLM_F_REQUEST | NLM_F_ACK;
+	req.nh.nlmsg_seq	= (*seq)++;
+
+	/* Fill selector. */
+	memcpy(&req.expire.pol.sel.daddr, &dst, sizeof(tundst));
+	memcpy(&req.expire.pol.sel.saddr, &src, sizeof(tunsrc));
+	req.expire.pol.sel.family	= AF_INET;
+	req.expire.pol.sel.prefixlen_d	= PREFIX_LEN;
+	req.expire.pol.sel.prefixlen_s	= PREFIX_LEN;
+	req.expire.pol.dir		= XFRM_POLICY_OUT;
+	req.expire.hard			= 0xff;
+
+	if (send(xfrm_sock, &req, req.nh.nlmsg_len, 0) < 0) {
+		pr_err("send()");
+		goto out_close;
+	}
+
+	if (recv(xfrm_sock, &req, sizeof(req), 0) < 0) {
+		pr_err("recv()");
+		goto out_close;
+	} else if (req.nh.nlmsg_type != NLMSG_ERROR) {
+		printk("expected NLMSG_ERROR, got %d", (int)req.nh.nlmsg_type);
+		goto out_close;
+	}
+
+	if (req.error) {
+		printk("NLMSG_ERROR: %d: %s", req.error, strerror(-req.error));
+		ret = req.error;
+		goto out_close;
+	}
+
+	if (recv(xfrm_listen, &req, sizeof(req), 0) < 0) {
+		pr_err("recv()");
+		goto out_close;
+	}
+
+	if (req.expire.hard != 0x1) {
+		printk("expire.hard is not set: %x", req.expire.hard);
+		goto out_close;
+	}
+
+	ret = KSFT_PASS;
+out_close:
+	close(xfrm_listen);
+	return ret;
+}
+
+static int child_serv(int xfrm_sock, uint32_t *seq,
+		unsigned int nr, int cmd_fd, void *buf, struct xfrm_desc *desc)
+{
+	struct in_addr src, dst, tunsrc, tundst;
+	struct test_desc msg;
+	int ret = KSFT_FAIL;
+
+	src = inet_makeaddr(INADDR_B, child_ip(nr));
+	dst = inet_makeaddr(INADDR_B, grchild_ip(nr));
+	tunsrc = inet_makeaddr(INADDR_A, child_ip(nr));
+	tundst = inet_makeaddr(INADDR_A, grchild_ip(nr));
+
+	/* UDP pinging without xfrm */
+	if (do_ping(cmd_fd, buf, page_size, src, true, 0, 0, udp_ping_send)) {
+		printk("ping failed before setting xfrm");
+		return KSFT_FAIL;
+	}
+
+	memset(&msg, 0, sizeof(msg));
+	msg.type = MSG_XFRM_PREPARE;
+	memcpy(&msg.body.xfrm_desc, desc, sizeof(*desc));
+	write_msg(cmd_fd, &msg, 1);
+
+	if (xfrm_prepare(xfrm_sock, seq, src, dst, tunsrc, tundst, desc->proto)) {
+		printk("failed to prepare xfrm");
+		goto cleanup;
+	}
+
+	memset(&msg, 0, sizeof(msg));
+	msg.type = MSG_XFRM_ADD;
+	memcpy(&msg.body.xfrm_desc, desc, sizeof(*desc));
+	write_msg(cmd_fd, &msg, 1);
+	if (xfrm_set(xfrm_sock, seq, src, dst, tunsrc, tundst, desc)) {
+		printk("failed to set xfrm");
+		goto delete;
+	}
+
+	/* UDP pinging with xfrm tunnel */
+	if (do_ping(cmd_fd, buf, page_size, tunsrc,
+				true, 0, 0, udp_ping_send)) {
+		printk("ping failed for xfrm");
+		goto delete;
+	}
+
+	ret = KSFT_PASS;
+delete:
+	/* xfrm delete */
+	memset(&msg, 0, sizeof(msg));
+	msg.type = MSG_XFRM_DEL;
+	memcpy(&msg.body.xfrm_desc, desc, sizeof(*desc));
+	write_msg(cmd_fd, &msg, 1);
+
+	if (xfrm_delete(xfrm_sock, seq, src, dst, tunsrc, tundst, desc->proto)) {
+		printk("failed ping to remove xfrm");
+		ret = KSFT_FAIL;
+	}
+
+cleanup:
+	memset(&msg, 0, sizeof(msg));
+	msg.type = MSG_XFRM_CLEANUP;
+	memcpy(&msg.body.xfrm_desc, desc, sizeof(*desc));
+	write_msg(cmd_fd, &msg, 1);
+	if (xfrm_cleanup(xfrm_sock, seq, src, dst, tunsrc, tundst)) {
+		printk("failed ping to cleanup xfrm");
+		ret = KSFT_FAIL;
+	}
+	return ret;
+}
+
+static int child_f(unsigned int nr, int test_desc_fd, int cmd_fd, void *buf)
+{
+	struct xfrm_desc desc;
+	struct test_desc msg;
+	int xfrm_sock = -1;
+	uint32_t seq;
+
+	if (switch_ns(nsfd_childa))
+		exit(KSFT_FAIL);
+
+	if (netlink_sock(&xfrm_sock, &seq, NETLINK_XFRM)) {
+		printk("Failed to open xfrm netlink socket");
+		exit(KSFT_FAIL);
+	}
+
+	/* Check that seq sock is ready, just for sure. */
+	memset(&msg, 0, sizeof(msg));
+	msg.type = MSG_ACK;
+	write_msg(cmd_fd, &msg, 1);
+	read_msg(cmd_fd, &msg, 1);
+	if (msg.type != MSG_ACK) {
+		printk("Ack failed");
+		exit(KSFT_FAIL);
+	}
+
+	for (;;) {
+		ssize_t received = read(test_desc_fd, &desc, sizeof(desc));
+		int ret;
+
+		if (received == 0) /* EOF */
+			break;
+
+		if (received != sizeof(desc)) {
+			pr_err("read() returned %zd", received);
+			exit(KSFT_FAIL);
+		}
+
+		switch (desc.type) {
+		case CREATE_TUNNEL:
+			ret = child_serv(xfrm_sock, &seq, nr,
+					 cmd_fd, buf, &desc);
+			break;
+		case ALLOCATE_SPI:
+			ret = xfrm_state_allocspi(xfrm_sock, &seq,
+						  -1, desc.proto);
+			break;
+		case MONITOR_ACQUIRE:
+			ret = xfrm_monitor_acquire(xfrm_sock, &seq, nr);
+			break;
+		case EXPIRE_STATE:
+			ret = xfrm_expire_state(xfrm_sock, &seq, nr, &desc);
+			break;
+		case EXPIRE_POLICY:
+			ret = xfrm_expire_policy(xfrm_sock, &seq, nr, &desc);
+			break;
+		default:
+			printk("Unknown desc type %d", desc.type);
+			exit(KSFT_FAIL);
+		}
+		write_test_result(ret, &desc);
+	}
+
+	close(xfrm_sock);
+
+	msg.type = MSG_EXIT;
+	write_msg(cmd_fd, &msg, 1);
+	exit(KSFT_PASS);
+}
+
+static void grand_child_serv(unsigned int nr, int cmd_fd, void *buf,
+		struct test_desc *msg, int xfrm_sock, uint32_t *seq)
+{
+	struct in_addr src, dst, tunsrc, tundst;
+	bool tun_reply;
+	struct xfrm_desc *desc = &msg->body.xfrm_desc;
+
+	src = inet_makeaddr(INADDR_B, grchild_ip(nr));
+	dst = inet_makeaddr(INADDR_B, child_ip(nr));
+	tunsrc = inet_makeaddr(INADDR_A, grchild_ip(nr));
+	tundst = inet_makeaddr(INADDR_A, child_ip(nr));
+
+	switch (msg->type) {
+	case MSG_EXIT:
+		exit(KSFT_PASS);
+	case MSG_ACK:
+		write_msg(cmd_fd, msg, 1);
+		break;
+	case MSG_PING:
+		tun_reply = memcmp(&dst, &msg->body.ping.reply_ip, sizeof(in_addr_t));
+		/* UDP pinging without xfrm */
+		if (do_ping(cmd_fd, buf, page_size, tun_reply ? tunsrc : src,
+				false, msg->body.ping.port,
+				msg->body.ping.reply_ip, udp_ping_reply)) {
+			printk("ping failed before setting xfrm");
+		}
+		break;
+	case MSG_XFRM_PREPARE:
+		if (xfrm_prepare(xfrm_sock, seq, src, dst, tunsrc, tundst,
+					desc->proto)) {
+			xfrm_cleanup(xfrm_sock, seq, src, dst, tunsrc, tundst);
+			printk("failed to prepare xfrm");
+		}
+		break;
+	case MSG_XFRM_ADD:
+		if (xfrm_set(xfrm_sock, seq, src, dst, tunsrc, tundst, desc)) {
+			xfrm_cleanup(xfrm_sock, seq, src, dst, tunsrc, tundst);
+			printk("failed to set xfrm");
+		}
+		break;
+	case MSG_XFRM_DEL:
+		if (xfrm_delete(xfrm_sock, seq, src, dst, tunsrc, tundst,
+					desc->proto)) {
+			xfrm_cleanup(xfrm_sock, seq, src, dst, tunsrc, tundst);
+			printk("failed to remove xfrm");
+		}
+		break;
+	case MSG_XFRM_CLEANUP:
+		if (xfrm_cleanup(xfrm_sock, seq, src, dst, tunsrc, tundst)) {
+			printk("failed to cleanup xfrm");
+		}
+		break;
+	default:
+		printk("got unknown msg type %d", msg->type);
+	};
+}
+
+static int grand_child_f(unsigned int nr, int cmd_fd, void *buf)
+{
+	struct test_desc msg;
+	int xfrm_sock = -1;
+	uint32_t seq;
+
+	if (switch_ns(nsfd_childb))
+		exit(KSFT_FAIL);
+
+	if (netlink_sock(&xfrm_sock, &seq, NETLINK_XFRM)) {
+		printk("Failed to open xfrm netlink socket");
+		exit(KSFT_FAIL);
+	}
+
+	do {
+		read_msg(cmd_fd, &msg, 1);
+		grand_child_serv(nr, cmd_fd, buf, &msg, xfrm_sock, &seq);
+	} while (1);
+
+	close(xfrm_sock);
+	exit(KSFT_FAIL);
+}
+
+static int start_child(unsigned int nr, char *veth, int test_desc_fd[2])
+{
+	int cmd_sock[2];
+	void *data_map;
+	pid_t child;
+
+	if (init_child(nsfd_childa, veth, child_ip(nr), grchild_ip(nr)))
+		return -1;
+
+	if (init_child(nsfd_childb, veth, grchild_ip(nr), child_ip(nr)))
+		return -1;
+
+	child = fork();
+	if (child < 0) {
+		pr_err("fork()");
+		return -1;
+	} else if (child) {
+		/* in parent - selftest */
+		return switch_ns(nsfd_parent);
+	}
+
+	if (close(test_desc_fd[1])) {
+		pr_err("close()");
+		return -1;
+	}
+
+	/* child */
+	data_map = mmap(0, page_size, PROT_READ | PROT_WRITE,
+			MAP_SHARED | MAP_ANONYMOUS, -1, 0);
+	if (data_map == MAP_FAILED) {
+		pr_err("mmap()");
+		return -1;
+	}
+
+	randomize_buffer(data_map, page_size);
+
+	if (socketpair(PF_LOCAL, SOCK_SEQPACKET, 0, cmd_sock)) {
+		pr_err("socketpair()");
+		return -1;
+	}
+
+	child = fork();
+	if (child < 0) {
+		pr_err("fork()");
+		return -1;
+	} else if (child) {
+		if (close(cmd_sock[0])) {
+			pr_err("close()");
+			return -1;
+		}
+		return child_f(nr, test_desc_fd[0], cmd_sock[1], data_map);
+	}
+	if (close(cmd_sock[1])) {
+		pr_err("close()");
+		return -1;
+	}
+	return grand_child_f(nr, cmd_sock[0], data_map);
+}
+
+static void exit_usage(char **argv)
+{
+	printk("Usage: %s [nr_process]", argv[0]);
+	exit(KSFT_FAIL);
+}
+
+static int __write_desc(int test_desc_fd, struct xfrm_desc *desc)
+{
+	ssize_t ret;
+
+	ret = write(test_desc_fd, desc, sizeof(*desc));
+
+	if (ret == sizeof(*desc))
+		return 0;
+
+	pr_err("Writing test's desc failed %ld", ret);
+
+	return -1;
+}
+
+static int write_desc(int proto, int test_desc_fd,
+		char *a, char *e, char *c, char *ae)
+{
+	struct xfrm_desc desc = {};
+
+	desc.type = CREATE_TUNNEL;
+	desc.proto = proto;
+
+	if (a)
+		strncpy(desc.a_algo, a, ALGO_LEN - 1);
+	if (e)
+		strncpy(desc.e_algo, e, ALGO_LEN - 1);
+	if (c)
+		strncpy(desc.c_algo, c, ALGO_LEN - 1);
+	if (ae)
+		strncpy(desc.ae_algo, ae, ALGO_LEN - 1);
+
+	return __write_desc(test_desc_fd, &desc);
+}
+
+int proto_list[] = { IPPROTO_AH, IPPROTO_COMP, IPPROTO_ESP };
+char *ah_list[] = {
+	"digest_null", "hmac(md5)", "hmac(sha1)", "hmac(sha256)",
+	"hmac(sha384)", "hmac(sha512)", "hmac(rmd160)",
+	"xcbc(aes)", "cmac(aes)"
+};
+char *comp_list[] = {
+	"deflate",
+#if 0
+	/* No compression backend realization */
+	"lzs", "lzjh"
+#endif
+};
+char *e_list[] = {
+	"ecb(cipher_null)", "cbc(des)", "cbc(des3_ede)", "cbc(cast5)",
+	"cbc(blowfish)", "cbc(aes)", "cbc(serpent)", "cbc(camellia)",
+	"cbc(twofish)", "rfc3686(ctr(aes))"
+};
+char *ae_list[] = {
+#if 0
+	/* not implemented */
+	"rfc4106(gcm(aes))", "rfc4309(ccm(aes))", "rfc4543(gcm(aes))",
+	"rfc7539esp(chacha20,poly1305)"
+#endif
+};
+
+const unsigned int proto_plan = ARRAY_SIZE(ah_list) + ARRAY_SIZE(comp_list) \
+				+ (ARRAY_SIZE(ah_list) * ARRAY_SIZE(e_list)) \
+				+ ARRAY_SIZE(ae_list);
+
+static int write_proto_plan(int fd, int proto)
+{
+	unsigned int i;
+
+	switch (proto) {
+	case IPPROTO_AH:
+		for (i = 0; i < ARRAY_SIZE(ah_list); i++) {
+			if (write_desc(proto, fd, ah_list[i], 0, 0, 0))
+				return -1;
+		}
+		break;
+	case IPPROTO_COMP:
+		for (i = 0; i < ARRAY_SIZE(comp_list); i++) {
+			if (write_desc(proto, fd, 0, 0, comp_list[i], 0))
+				return -1;
+		}
+		break;
+	case IPPROTO_ESP:
+		for (i = 0; i < ARRAY_SIZE(ah_list); i++) {
+			int j;
+
+			for (j = 0; j < ARRAY_SIZE(e_list); j++) {
+				if (write_desc(proto, fd, ah_list[i],
+							e_list[j], 0, 0))
+					return -1;
+			}
+		}
+		for (i = 0; i < ARRAY_SIZE(ae_list); i++) {
+			if (write_desc(proto, fd, 0, 0, 0, ae_list[i]))
+				return -1;
+		}
+		break;
+	default:
+		printk("BUG: Specified unknown proto %d", proto);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Some structures in xfrm uapi header differ in size between
+ * 64-bit and 32-bit ABI:
+ *
+ *             32-bit UABI               |            64-bit UABI
+ *  -------------------------------------|-------------------------------------
+ *   sizeof(xfrm_usersa_info)     = 220  |  sizeof(xfrm_usersa_info)     = 224
+ *   sizeof(xfrm_userpolicy_info) = 164  |  sizeof(xfrm_userpolicy_info) = 168
+ *   sizeof(xfrm_userspi_info)    = 228  |  sizeof(xfrm_userspi_info)    = 232
+ *   sizeof(xfrm_user_acquire)    = 276  |  sizeof(xfrm_user_acquire)    = 280
+ *   sizeof(xfrm_user_expire)     = 224  |  sizeof(xfrm_user_expire)     = 232
+ *   sizeof(xfrm_user_polexpire)  = 168  |  sizeof(xfrm_user_polexpire)  = 176
+ *
+ * Check the affected by the UABI difference structures.
+ */
+const unsigned int compat_plan = 4;
+static int write_compat_struct_tests(int test_desc_fd)
+{
+	struct xfrm_desc desc = {};
+
+	desc.type = ALLOCATE_SPI;
+	desc.proto = IPPROTO_AH;
+	strncpy(desc.a_algo, ah_list[0], ALGO_LEN - 1);
+
+	if (__write_desc(test_desc_fd, &desc))
+		return -1;
+
+	desc.type = MONITOR_ACQUIRE;
+	if (__write_desc(test_desc_fd, &desc))
+		return -1;
+
+	desc.type = EXPIRE_STATE;
+	if (__write_desc(test_desc_fd, &desc))
+		return -1;
+
+	desc.type = EXPIRE_POLICY;
+	if (__write_desc(test_desc_fd, &desc))
+		return -1;
+
+	return 0;
+}
+
+static int write_test_plan(int test_desc_fd)
+{
+	unsigned int i;
+	pid_t child;
+
+	child = fork();
+	if (child < 0) {
+		pr_err("fork()");
+		return -1;
+	}
+	if (child) {
+		if (close(test_desc_fd))
+			printk("close(): %m");
+		return 0;
+	}
+
+	if (write_compat_struct_tests(test_desc_fd))
+		exit(KSFT_FAIL);
+
+	for (i = 0; i < ARRAY_SIZE(proto_list); i++) {
+		if (write_proto_plan(test_desc_fd, proto_list[i]))
+			exit(KSFT_FAIL);
+	}
+
+	exit(KSFT_PASS);
+}
+
+static int children_cleanup(void)
+{
+	unsigned ret = KSFT_PASS;
+
+	while (1) {
+		int status;
+		pid_t p = wait(&status);
+
+		if ((p < 0) && errno == ECHILD)
+			break;
+
+		if (p < 0) {
+			pr_err("wait()");
+			return KSFT_FAIL;
+		}
+
+		if (!WIFEXITED(status)) {
+			ret = KSFT_FAIL;
+			continue;
+		}
+
+		if (WEXITSTATUS(status) == KSFT_FAIL)
+			ret = KSFT_FAIL;
+	}
+
+	return ret;
+}
+
+typedef void (*print_res)(const char *, ...);
+
+static int check_results(void)
+{
+	struct test_result tr = {};
+	struct xfrm_desc *d = &tr.desc;
+	int ret = KSFT_PASS;
+
+	while (1) {
+		ssize_t received = read(results_fd[0], &tr, sizeof(tr));
+		print_res result;
+
+		if (received == 0) /* EOF */
+			break;
+
+		if (received != sizeof(tr)) {
+			pr_err("read() returned %zd", received);
+			return KSFT_FAIL;
+		}
+
+		switch (tr.res) {
+		case KSFT_PASS:
+			result = ksft_test_result_pass;
+			break;
+		case KSFT_FAIL:
+		default:
+			result = ksft_test_result_fail;
+			ret = KSFT_FAIL;
+		}
+
+		result(" %s: [%u, '%s', '%s', '%s', '%s', %u]\n",
+		       desc_name[d->type], (unsigned int)d->proto, d->a_algo,
+		       d->e_algo, d->c_algo, d->ae_algo, d->icv_len);
+	}
+
+	return ret;
+}
+
+int main(int argc, char **argv)
+{
+	long nr_process = 1;
+	int route_sock = -1, ret = KSFT_SKIP;
+	int test_desc_fd[2];
+	uint32_t route_seq;
+	unsigned int i;
+
+	if (argc > 2)
+		exit_usage(argv);
+
+	if (argc > 1) {
+		char *endptr;
+
+		errno = 0;
+		nr_process = strtol(argv[1], &endptr, 10);
+		if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN))
+				|| (errno != 0 && nr_process == 0)
+				|| (endptr == argv[1]) || (*endptr != '\0')) {
+			printk("Failed to parse [nr_process]");
+			exit_usage(argv);
+		}
+
+		if (nr_process > MAX_PROCESSES || nr_process < 1) {
+			printk("nr_process should be between [1; %u]",
+					MAX_PROCESSES);
+			exit_usage(argv);
+		}
+	}
+
+	srand(time(NULL));
+	page_size = sysconf(_SC_PAGESIZE);
+	if (page_size < 1)
+		ksft_exit_skip("sysconf(): %m\n");
+
+	if (pipe2(test_desc_fd, O_DIRECT) < 0)
+		ksft_exit_skip("pipe(): %m\n");
+
+	if (pipe2(results_fd, O_DIRECT) < 0)
+		ksft_exit_skip("pipe(): %m\n");
+
+	if (init_namespaces())
+		ksft_exit_skip("Failed to create namespaces\n");
+
+	if (netlink_sock(&route_sock, &route_seq, NETLINK_ROUTE))
+		ksft_exit_skip("Failed to open netlink route socket\n");
+
+	for (i = 0; i < nr_process; i++) {
+		char veth[VETH_LEN];
+
+		snprintf(veth, VETH_LEN, VETH_FMT, i);
+
+		if (veth_add(route_sock, route_seq++, veth, nsfd_childa, veth, nsfd_childb)) {
+			close(route_sock);
+			ksft_exit_fail_msg("Failed to create veth device");
+		}
+
+		if (start_child(i, veth, test_desc_fd)) {
+			close(route_sock);
+			ksft_exit_fail_msg("Child %u failed to start", i);
+		}
+	}
+
+	if (close(route_sock) || close(test_desc_fd[0]) || close(results_fd[1]))
+		ksft_exit_fail_msg("close(): %m");
+
+	ksft_set_plan(proto_plan + compat_plan);
+
+	if (write_test_plan(test_desc_fd[1]))
+		ksft_exit_fail_msg("Failed to write test plan to pipe");
+
+	ret = check_results();
+
+	if (children_cleanup() == KSFT_FAIL)
+		exit(KSFT_FAIL);
+
+	exit(ret);
+}
diff --git a/tools/testing/selftests/net/ipv6_flowlabel.c b/tools/testing/selftests/net/ipv6_flowlabel.c
new file mode 100644
index 000000000..a7c413753
--- /dev/null
+++ b/tools/testing/selftests/net/ipv6_flowlabel.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Test IPV6_FLOWINFO cmsg on send and recv */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <asm/byteorder.h>
+#include <error.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <linux/in6.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+/* uapi/glibc weirdness may leave this undefined */
+#ifndef IPV6_FLOWINFO
+#define IPV6_FLOWINFO 11
+#endif
+
+#ifndef IPV6_FLOWLABEL_MGR
+#define IPV6_FLOWLABEL_MGR 32
+#endif
+
+#define FLOWLABEL_WILDCARD	((uint32_t) -1)
+
+static const char cfg_data[]	= "a";
+static uint32_t cfg_label	= 1;
+
+static void do_send(int fd, bool with_flowlabel, uint32_t flowlabel)
+{
+	char control[CMSG_SPACE(sizeof(flowlabel))] = {0};
+	struct msghdr msg = {0};
+	struct iovec iov = {0};
+	int ret;
+
+	iov.iov_base = (char *)cfg_data;
+	iov.iov_len = sizeof(cfg_data);
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	if (with_flowlabel) {
+		struct cmsghdr *cm;
+
+		cm = (void *)control;
+		cm->cmsg_len = CMSG_LEN(sizeof(flowlabel));
+		cm->cmsg_level = SOL_IPV6;
+		cm->cmsg_type = IPV6_FLOWINFO;
+		*(uint32_t *)CMSG_DATA(cm) = htonl(flowlabel);
+
+		msg.msg_control = control;
+		msg.msg_controllen = sizeof(control);
+	}
+
+	ret = sendmsg(fd, &msg, 0);
+	if (ret == -1)
+		error(1, errno, "send");
+
+	if (with_flowlabel)
+		fprintf(stderr, "sent with label %u\n", flowlabel);
+	else
+		fprintf(stderr, "sent without label\n");
+}
+
+static void do_recv(int fd, bool with_flowlabel, uint32_t expect)
+{
+	char control[CMSG_SPACE(sizeof(expect))];
+	char data[sizeof(cfg_data)];
+	struct msghdr msg = {0};
+	struct iovec iov = {0};
+	struct cmsghdr *cm;
+	uint32_t flowlabel;
+	int ret;
+
+	iov.iov_base = data;
+	iov.iov_len = sizeof(data);
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	memset(control, 0, sizeof(control));
+	msg.msg_control = control;
+	msg.msg_controllen = sizeof(control);
+
+	ret = recvmsg(fd, &msg, 0);
+	if (ret == -1)
+		error(1, errno, "recv");
+	if (msg.msg_flags & (MSG_TRUNC | MSG_CTRUNC))
+		error(1, 0, "recv: truncated");
+	if (ret != sizeof(cfg_data))
+		error(1, 0, "recv: length mismatch");
+	if (memcmp(data, cfg_data, sizeof(data)))
+		error(1, 0, "recv: data mismatch");
+
+	cm = CMSG_FIRSTHDR(&msg);
+	if (with_flowlabel) {
+		if (!cm)
+			error(1, 0, "recv: missing cmsg");
+		if (CMSG_NXTHDR(&msg, cm))
+			error(1, 0, "recv: too many cmsg");
+		if (cm->cmsg_level != SOL_IPV6 ||
+		    cm->cmsg_type != IPV6_FLOWINFO)
+			error(1, 0, "recv: unexpected cmsg level or type");
+
+		flowlabel = ntohl(*(uint32_t *)CMSG_DATA(cm));
+		fprintf(stderr, "recv with label %u\n", flowlabel);
+
+		if (expect != FLOWLABEL_WILDCARD && expect != flowlabel)
+			fprintf(stderr, "recv: incorrect flowlabel %u != %u\n",
+					flowlabel, expect);
+
+	} else {
+		fprintf(stderr, "recv without label\n");
+	}
+}
+
+static bool get_autoflowlabel_enabled(void)
+{
+	int fd, ret;
+	char val;
+
+	fd = open("/proc/sys/net/ipv6/auto_flowlabels", O_RDONLY);
+	if (fd == -1)
+		error(1, errno, "open sysctl");
+
+	ret = read(fd, &val, 1);
+	if (ret == -1)
+		error(1, errno, "read sysctl");
+	if (ret == 0)
+		error(1, 0, "read sysctl: 0");
+
+	if (close(fd))
+		error(1, errno, "close sysctl");
+
+	return val == '1';
+}
+
+static void flowlabel_get(int fd, uint32_t label, uint8_t share, uint16_t flags)
+{
+	struct in6_flowlabel_req req = {
+		.flr_action = IPV6_FL_A_GET,
+		.flr_label = htonl(label),
+		.flr_flags = flags,
+		.flr_share = share,
+	};
+
+	/* do not pass IPV6_ADDR_ANY or IPV6_ADDR_MAPPED */
+	req.flr_dst.s6_addr[0] = 0xfd;
+	req.flr_dst.s6_addr[15] = 0x1;
+
+	if (setsockopt(fd, SOL_IPV6, IPV6_FLOWLABEL_MGR, &req, sizeof(req)))
+		error(1, errno, "setsockopt flowlabel get");
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c;
+
+	while ((c = getopt(argc, argv, "l:")) != -1) {
+		switch (c) {
+		case 'l':
+			cfg_label = strtoul(optarg, NULL, 0);
+			break;
+		default:
+			error(1, 0, "%s: parse error", argv[0]);
+		}
+	}
+}
+
+int main(int argc, char **argv)
+{
+	struct sockaddr_in6 addr = {
+		.sin6_family = AF_INET6,
+		.sin6_port = htons(8000),
+		.sin6_addr = IN6ADDR_LOOPBACK_INIT,
+	};
+	const int one = 1;
+	int fdt, fdr;
+
+	parse_opts(argc, argv);
+
+	fdt = socket(PF_INET6, SOCK_DGRAM, 0);
+	if (fdt == -1)
+		error(1, errno, "socket t");
+
+	fdr = socket(PF_INET6, SOCK_DGRAM, 0);
+	if (fdr == -1)
+		error(1, errno, "socket r");
+
+	if (connect(fdt, (void *)&addr, sizeof(addr)))
+		error(1, errno, "connect");
+	if (bind(fdr, (void *)&addr, sizeof(addr)))
+		error(1, errno, "bind");
+
+	flowlabel_get(fdt, cfg_label, IPV6_FL_S_EXCL, IPV6_FL_F_CREATE);
+
+	if (setsockopt(fdr, SOL_IPV6, IPV6_FLOWINFO, &one, sizeof(one)))
+		error(1, errno, "setsockopt flowinfo");
+
+	if (get_autoflowlabel_enabled()) {
+		fprintf(stderr, "send no label: recv auto flowlabel\n");
+		do_send(fdt, false, 0);
+		do_recv(fdr, true, FLOWLABEL_WILDCARD);
+	} else {
+		fprintf(stderr, "send no label: recv no label (auto off)\n");
+		do_send(fdt, false, 0);
+		do_recv(fdr, false, 0);
+	}
+
+	fprintf(stderr, "send label\n");
+	do_send(fdt, true, cfg_label);
+	do_recv(fdr, true, cfg_label);
+
+	if (close(fdr))
+		error(1, errno, "close r");
+	if (close(fdt))
+		error(1, errno, "close t");
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/ipv6_flowlabel.sh b/tools/testing/selftests/net/ipv6_flowlabel.sh
new file mode 100755
index 000000000..d3bc64427
--- /dev/null
+++ b/tools/testing/selftests/net/ipv6_flowlabel.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Regression tests for IPv6 flowlabels
+#
+# run in separate namespaces to avoid mgmt db conflicts betweent tests
+
+set -e
+
+echo "TEST management"
+./in_netns.sh ./ipv6_flowlabel_mgr
+
+echo "TEST datapath"
+./in_netns.sh \
+  sh -c 'sysctl -q -w net.ipv6.auto_flowlabels=0 && ./ipv6_flowlabel -l 1'
+
+echo "TEST datapath (with auto-flowlabels)"
+./in_netns.sh \
+  sh -c 'sysctl -q -w net.ipv6.auto_flowlabels=1 && ./ipv6_flowlabel -l 1'
+
+echo OK. All tests passed
diff --git a/tools/testing/selftests/net/ipv6_flowlabel_mgr.c b/tools/testing/selftests/net/ipv6_flowlabel_mgr.c
new file mode 100644
index 000000000..af95b48ac
--- /dev/null
+++ b/tools/testing/selftests/net/ipv6_flowlabel_mgr.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Test IPV6_FLOWINFO_MGR */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <error.h>
+#include <errno.h>
+#include <limits.h>
+#include <linux/in6.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+/* uapi/glibc weirdness may leave this undefined */
+#ifndef IPV6_FLOWLABEL_MGR
+#define IPV6_FLOWLABEL_MGR	32
+#endif
+
+/* from net/ipv6/ip6_flowlabel.c */
+#define FL_MIN_LINGER		6
+
+#define explain(x)							\
+	do { if (cfg_verbose) fprintf(stderr, "       " x "\n"); } while (0)
+
+#define __expect(x)							\
+	do {								\
+		if (!(x))						\
+			fprintf(stderr, "[OK]   " #x "\n");		\
+		else							\
+			error(1, 0, "[ERR]  " #x " (line %d)", __LINE__); \
+	} while (0)
+
+#define expect_pass(x)	__expect(x)
+#define expect_fail(x)	__expect(!(x))
+
+static bool cfg_long_running;
+static bool cfg_verbose;
+
+static int flowlabel_get(int fd, uint32_t label, uint8_t share, uint16_t flags)
+{
+	struct in6_flowlabel_req req = {
+		.flr_action = IPV6_FL_A_GET,
+		.flr_label = htonl(label),
+		.flr_flags = flags,
+		.flr_share = share,
+	};
+
+	/* do not pass IPV6_ADDR_ANY or IPV6_ADDR_MAPPED */
+	req.flr_dst.s6_addr[0] = 0xfd;
+	req.flr_dst.s6_addr[15] = 0x1;
+
+	return setsockopt(fd, SOL_IPV6, IPV6_FLOWLABEL_MGR, &req, sizeof(req));
+}
+
+static int flowlabel_put(int fd, uint32_t label)
+{
+	struct in6_flowlabel_req req = {
+		.flr_action = IPV6_FL_A_PUT,
+		.flr_label = htonl(label),
+	};
+
+	return setsockopt(fd, SOL_IPV6, IPV6_FLOWLABEL_MGR, &req, sizeof(req));
+}
+
+static void run_tests(int fd)
+{
+	int wstatus;
+	pid_t pid;
+
+	explain("cannot get non-existent label");
+	expect_fail(flowlabel_get(fd, 1, IPV6_FL_S_ANY, 0));
+
+	explain("cannot put non-existent label");
+	expect_fail(flowlabel_put(fd, 1));
+
+	explain("cannot create label greater than 20 bits");
+	expect_fail(flowlabel_get(fd, 0x1FFFFF, IPV6_FL_S_ANY,
+				  IPV6_FL_F_CREATE));
+
+	explain("create a new label (FL_F_CREATE)");
+	expect_pass(flowlabel_get(fd, 1, IPV6_FL_S_ANY, IPV6_FL_F_CREATE));
+	explain("can get the label (without FL_F_CREATE)");
+	expect_pass(flowlabel_get(fd, 1, IPV6_FL_S_ANY, 0));
+	explain("can get it again with create flag set, too");
+	expect_pass(flowlabel_get(fd, 1, IPV6_FL_S_ANY, IPV6_FL_F_CREATE));
+	explain("cannot get it again with the exclusive (FL_FL_EXCL) flag");
+	expect_fail(flowlabel_get(fd, 1, IPV6_FL_S_ANY,
+					 IPV6_FL_F_CREATE | IPV6_FL_F_EXCL));
+	explain("can now put exactly three references");
+	expect_pass(flowlabel_put(fd, 1));
+	expect_pass(flowlabel_put(fd, 1));
+	expect_pass(flowlabel_put(fd, 1));
+	expect_fail(flowlabel_put(fd, 1));
+
+	explain("create a new exclusive label (FL_S_EXCL)");
+	expect_pass(flowlabel_get(fd, 2, IPV6_FL_S_EXCL, IPV6_FL_F_CREATE));
+	explain("cannot get it again in non-exclusive mode");
+	expect_fail(flowlabel_get(fd, 2, IPV6_FL_S_ANY,  IPV6_FL_F_CREATE));
+	explain("cannot get it again in exclusive mode either");
+	expect_fail(flowlabel_get(fd, 2, IPV6_FL_S_EXCL, IPV6_FL_F_CREATE));
+	expect_pass(flowlabel_put(fd, 2));
+
+	if (cfg_long_running) {
+		explain("cannot reuse the label, due to linger");
+		expect_fail(flowlabel_get(fd, 2, IPV6_FL_S_ANY,
+					  IPV6_FL_F_CREATE));
+		explain("after sleep, can reuse");
+		sleep(FL_MIN_LINGER * 2 + 1);
+		expect_pass(flowlabel_get(fd, 2, IPV6_FL_S_ANY,
+					  IPV6_FL_F_CREATE));
+	}
+
+	explain("create a new user-private label (FL_S_USER)");
+	expect_pass(flowlabel_get(fd, 3, IPV6_FL_S_USER, IPV6_FL_F_CREATE));
+	explain("cannot get it again in non-exclusive mode");
+	expect_fail(flowlabel_get(fd, 3, IPV6_FL_S_ANY, 0));
+	explain("cannot get it again in exclusive mode");
+	expect_fail(flowlabel_get(fd, 3, IPV6_FL_S_EXCL, 0));
+	explain("can get it again in user mode");
+	expect_pass(flowlabel_get(fd, 3, IPV6_FL_S_USER, 0));
+	explain("child process can get it too, but not after setuid(nobody)");
+	pid = fork();
+	if (pid == -1)
+		error(1, errno, "fork");
+	if (!pid) {
+		expect_pass(flowlabel_get(fd, 3, IPV6_FL_S_USER, 0));
+		if (setuid(USHRT_MAX))
+			fprintf(stderr, "[INFO] skip setuid child test\n");
+		else
+			expect_fail(flowlabel_get(fd, 3, IPV6_FL_S_USER, 0));
+		exit(0);
+	}
+	if (wait(&wstatus) == -1)
+		error(1, errno, "wait");
+	if (!WIFEXITED(wstatus) || WEXITSTATUS(wstatus) != 0)
+		error(1, errno, "wait: unexpected child result");
+
+	explain("create a new process-private label (FL_S_PROCESS)");
+	expect_pass(flowlabel_get(fd, 4, IPV6_FL_S_PROCESS, IPV6_FL_F_CREATE));
+	explain("can get it again");
+	expect_pass(flowlabel_get(fd, 4, IPV6_FL_S_PROCESS, 0));
+	explain("child process cannot can get it");
+	pid = fork();
+	if (pid == -1)
+		error(1, errno, "fork");
+	if (!pid) {
+		expect_fail(flowlabel_get(fd, 4, IPV6_FL_S_PROCESS, 0));
+		exit(0);
+	}
+	if (wait(&wstatus) == -1)
+		error(1, errno, "wait");
+	if (!WIFEXITED(wstatus) || WEXITSTATUS(wstatus) != 0)
+		error(1, errno, "wait: unexpected child result");
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c;
+
+	while ((c = getopt(argc, argv, "lv")) != -1) {
+		switch (c) {
+		case 'l':
+			cfg_long_running = true;
+			break;
+		case 'v':
+			cfg_verbose = true;
+			break;
+		default:
+			error(1, 0, "%s: parse error", argv[0]);
+		}
+	}
+}
+
+int main(int argc, char **argv)
+{
+	int fd;
+
+	parse_opts(argc, argv);
+
+	fd = socket(PF_INET6, SOCK_DGRAM, 0);
+	if (fd == -1)
+		error(1, errno, "socket");
+
+	run_tests(fd);
+
+	if (close(fd))
+		error(1, errno, "close");
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/l2tp.sh b/tools/testing/selftests/net/l2tp.sh
new file mode 100755
index 000000000..578243388
--- /dev/null
+++ b/tools/testing/selftests/net/l2tp.sh
@@ -0,0 +1,382 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# L2TPv3 tunnel between 2 hosts
+#
+#            host-1          |   router   |     host-2
+#                            |            |
+#      lo          l2tp      |            |      l2tp           lo
+# 172.16.101.1  172.16.1.1   |            | 172.16.1.2    172.16.101.2
+#  fc00:101::1   fc00:1::1   |            |   fc00:1::2    fc00:101::2
+#                            |            |
+#                  eth0      |            |     eth0
+#                10.1.1.1    |            |   10.1.2.1
+#              2001:db8:1::1 |            | 2001:db8:2::1
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+################################################################################
+#
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+run_cmd()
+{
+	local ns
+	local cmd
+	local out
+	local rc
+
+	ns="$1"
+	shift
+	cmd="$*"
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "    COMMAND: $cmd\n"
+	fi
+
+	out=$(eval ip netns exec ${ns} ${cmd} 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+################################################################################
+# create namespaces and interconnects
+
+create_ns()
+{
+	local ns=$1
+	local addr=$2
+	local addr6=$3
+
+	[ -z "${addr}" ] && addr="-"
+	[ -z "${addr6}" ] && addr6="-"
+
+	ip netns add ${ns}
+
+	ip -netns ${ns} link set lo up
+	if [ "${addr}" != "-" ]; then
+		ip -netns ${ns} addr add dev lo ${addr}
+	fi
+	if [ "${addr6}" != "-" ]; then
+		ip -netns ${ns} -6 addr add dev lo ${addr6}
+	fi
+
+	ip -netns ${ns} ro add unreachable default metric 8192
+	ip -netns ${ns} -6 ro add unreachable default metric 8192
+
+	ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0
+}
+
+# create veth pair to connect namespaces and apply addresses.
+connect_ns()
+{
+	local ns1=$1
+	local ns1_dev=$2
+	local ns1_addr=$3
+	local ns1_addr6=$4
+	local ns2=$5
+	local ns2_dev=$6
+	local ns2_addr=$7
+	local ns2_addr6=$8
+
+	ip -netns ${ns1} li add ${ns1_dev} type veth peer name tmp
+	ip -netns ${ns1} li set ${ns1_dev} up
+	ip -netns ${ns1} li set tmp netns ${ns2} name ${ns2_dev}
+	ip -netns ${ns2} li set ${ns2_dev} up
+
+	if [ "${ns1_addr}" != "-" ]; then
+		ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr}
+		ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr}
+	fi
+
+	if [ "${ns1_addr6}" != "-" ]; then
+		ip -netns ${ns1} addr add dev ${ns1_dev} ${ns1_addr6}
+		ip -netns ${ns2} addr add dev ${ns2_dev} ${ns2_addr6}
+	fi
+}
+
+################################################################################
+# test setup
+
+cleanup()
+{
+	local ns
+
+	for ns in host-1 host-2 router
+	do
+		ip netns del ${ns} 2>/dev/null
+	done
+}
+
+setup_l2tp_ipv4()
+{
+	#
+	# configure l2tpv3 tunnel on host-1
+	#
+	ip -netns host-1 l2tp add tunnel tunnel_id 1041 peer_tunnel_id 1042 \
+			 encap ip local 10.1.1.1 remote 10.1.2.1
+	ip -netns host-1 l2tp add session name l2tp4 tunnel_id 1041 \
+			 session_id 1041 peer_session_id 1042
+	ip -netns host-1 link set dev l2tp4 up
+	ip -netns host-1 addr add dev l2tp4 172.16.1.1 peer 172.16.1.2
+
+	#
+	# configure l2tpv3 tunnel on host-2
+	#
+	ip -netns host-2 l2tp add tunnel tunnel_id 1042 peer_tunnel_id 1041 \
+			 encap ip local 10.1.2.1 remote 10.1.1.1
+	ip -netns host-2 l2tp add session name l2tp4 tunnel_id 1042 \
+			 session_id 1042 peer_session_id 1041
+	ip -netns host-2 link set dev l2tp4 up
+	ip -netns host-2 addr add dev l2tp4 172.16.1.2 peer 172.16.1.1
+
+	#
+	# add routes to loopback addresses
+	#
+	ip -netns host-1 ro add 172.16.101.2/32 via 172.16.1.2
+	ip -netns host-2 ro add 172.16.101.1/32 via 172.16.1.1
+}
+
+setup_l2tp_ipv6()
+{
+	#
+	# configure l2tpv3 tunnel on host-1
+	#
+	ip -netns host-1 l2tp add tunnel tunnel_id 1061 peer_tunnel_id 1062 \
+			 encap ip local 2001:db8:1::1 remote 2001:db8:2::1
+	ip -netns host-1 l2tp add session name l2tp6 tunnel_id 1061 \
+			 session_id 1061 peer_session_id 1062
+	ip -netns host-1 link set dev l2tp6 up
+	ip -netns host-1 addr add dev l2tp6 fc00:1::1 peer fc00:1::2
+
+	#
+	# configure l2tpv3 tunnel on host-2
+	#
+	ip -netns host-2 l2tp add tunnel tunnel_id 1062 peer_tunnel_id 1061 \
+			 encap ip local 2001:db8:2::1 remote 2001:db8:1::1
+	ip -netns host-2 l2tp add session name l2tp6 tunnel_id 1062 \
+			 session_id 1062 peer_session_id 1061
+	ip -netns host-2 link set dev l2tp6 up
+	ip -netns host-2 addr add dev l2tp6 fc00:1::2 peer fc00:1::1
+
+	#
+	# add routes to loopback addresses
+	#
+	ip -netns host-1 -6 ro add fc00:101::2/128 via fc00:1::2
+	ip -netns host-2 -6 ro add fc00:101::1/128 via fc00:1::1
+}
+
+setup()
+{
+	# start clean
+	cleanup
+
+	set -e
+	create_ns host-1 172.16.101.1/32 fc00:101::1/128
+	create_ns host-2 172.16.101.2/32 fc00:101::2/128
+	create_ns router
+
+	connect_ns host-1 eth0 10.1.1.1/24 2001:db8:1::1/64 \
+	           router eth1 10.1.1.2/24 2001:db8:1::2/64
+
+	connect_ns host-2 eth0 10.1.2.1/24 2001:db8:2::1/64 \
+	           router eth2 10.1.2.2/24 2001:db8:2::2/64
+
+	ip -netns host-1 ro add 10.1.2.0/24 via 10.1.1.2
+	ip -netns host-1 -6 ro add 2001:db8:2::/64 via 2001:db8:1::2
+
+	ip -netns host-2 ro add 10.1.1.0/24 via 10.1.2.2
+	ip -netns host-2 -6 ro add 2001:db8:1::/64 via 2001:db8:2::2
+
+	setup_l2tp_ipv4
+	setup_l2tp_ipv6
+	set +e
+}
+
+setup_ipsec()
+{
+	#
+	# IPv4
+	#
+	run_cmd host-1 ip xfrm policy add \
+		src 10.1.1.1 dst 10.1.2.1 dir out \
+		tmpl proto esp mode transport
+
+	run_cmd host-1 ip xfrm policy add \
+		src 10.1.2.1 dst 10.1.1.1 dir in \
+		tmpl proto esp mode transport
+
+	run_cmd host-2 ip xfrm policy add \
+		src 10.1.1.1 dst 10.1.2.1 dir in \
+		tmpl proto esp mode transport
+
+	run_cmd host-2 ip xfrm policy add \
+		src 10.1.2.1 dst 10.1.1.1 dir out \
+		tmpl proto esp mode transport
+
+	ip -netns host-1 xfrm state add \
+		src 10.1.1.1 dst 10.1.2.1 \
+		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+	ip -netns host-1 xfrm state add \
+		src 10.1.2.1 dst 10.1.1.1 \
+		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+	ip -netns host-2 xfrm state add \
+		src 10.1.1.1 dst 10.1.2.1 \
+		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+	ip -netns host-2 xfrm state add \
+		src 10.1.2.1 dst 10.1.1.1 \
+		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+	#
+	# IPV6
+	#
+	run_cmd host-1 ip -6 xfrm policy add \
+		src 2001:db8:1::1 dst 2001:db8:2::1 dir out \
+		tmpl proto esp mode transport
+
+	run_cmd host-1 ip -6 xfrm policy add \
+		src 2001:db8:2::1 dst 2001:db8:1::1 dir in \
+		tmpl proto esp mode transport
+
+	run_cmd host-2 ip -6 xfrm policy add \
+		src 2001:db8:1::1 dst 2001:db8:2::1 dir in \
+		tmpl proto esp mode transport
+
+	run_cmd host-2 ip -6 xfrm policy add \
+		src 2001:db8:2::1 dst 2001:db8:1::1 dir out \
+		tmpl proto esp mode transport
+
+	ip -netns host-1 -6 xfrm state add \
+		src 2001:db8:1::1 dst 2001:db8:2::1 \
+		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+	ip -netns host-1 -6 xfrm state add \
+		src 2001:db8:2::1 dst 2001:db8:1::1 \
+		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+	ip -netns host-2 -6 xfrm state add \
+		src 2001:db8:1::1 dst 2001:db8:2::1 \
+		spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' \
+		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+
+	ip -netns host-2 -6 xfrm state add \
+		src 2001:db8:2::1 dst 2001:db8:1::1 \
+		spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' \
+		0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode transport
+}
+
+teardown_ipsec()
+{
+	run_cmd host-1 ip xfrm state flush
+	run_cmd host-1 ip xfrm policy flush
+	run_cmd host-2 ip xfrm state flush
+	run_cmd host-2 ip xfrm policy flush
+}
+
+################################################################################
+# generate traffic through tunnel for various cases
+
+run_ping()
+{
+	local desc="$1"
+
+	run_cmd host-1 ping -c1 -w1 172.16.1.2
+	log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
+
+	run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
+	log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
+
+	run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2
+	log_test $? 0 "IPv6 basic L2TP tunnel ${desc}"
+
+	run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
+	log_test $? 0 "IPv6 route through L2TP tunnel ${desc}"
+}
+
+run_tests()
+{
+	local desc
+
+	setup
+	run_ping
+
+	setup_ipsec
+	run_ping "- with IPsec"
+	run_cmd host-1 ping -c1 -w1 172.16.1.2
+	log_test $? 0 "IPv4 basic L2TP tunnel ${desc}"
+
+	run_cmd host-1 ping -c1 -w1 -I 172.16.101.1 172.16.101.2
+	log_test $? 0 "IPv4 route through L2TP tunnel ${desc}"
+
+	run_cmd host-1 ${ping6} -c1 -w1 fc00:1::2
+	log_test $? 0 "IPv6 basic L2TP tunnel - with IPsec"
+
+	run_cmd host-1 ${ping6} -c1 -w1 -I fc00:101::1 fc00:101::2
+	log_test $? 0 "IPv6 route through L2TP tunnel - with IPsec"
+
+	teardown_ipsec
+	run_ping "- after IPsec teardown"
+}
+
+################################################################################
+# main
+
+declare -i nfail=0
+declare -i nsuccess=0
+
+while getopts :pv o
+do
+	case $o in
+		p) PAUSE_ON_FAIL=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		*) exit 1;;
+	esac
+done
+
+run_tests
+cleanup
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n"   ${nfail}
diff --git a/tools/testing/selftests/net/mptcp/.gitignore b/tools/testing/selftests/net/mptcp/.gitignore
new file mode 100644
index 000000000..260336d5f
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+mptcp_connect
+pm_nl_ctl
+*.pcap
diff --git a/tools/testing/selftests/net/mptcp/Makefile b/tools/testing/selftests/net/mptcp/Makefile
new file mode 100644
index 000000000..7072ef1c0
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+
+top_srcdir = ../../../../..
+KSFT_KHDR_INSTALL := 1
+
+CFLAGS =  -Wall -Wl,--no-as-needed -O2 -g  -I$(top_srcdir)/usr/include
+
+TEST_PROGS := mptcp_connect.sh pm_netlink.sh mptcp_join.sh diag.sh \
+	      simult_flows.sh
+
+TEST_GEN_FILES = mptcp_connect pm_nl_ctl
+
+TEST_FILES := mptcp_lib.sh settings
+
+EXTRA_CLEAN := *.pcap
+
+include ../../lib.mk
diff --git a/tools/testing/selftests/net/mptcp/config b/tools/testing/selftests/net/mptcp/config
new file mode 100644
index 000000000..8867c4025
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/config
@@ -0,0 +1,9 @@
+CONFIG_KALLSYMS=y
+CONFIG_MPTCP=y
+CONFIG_IPV6=y
+CONFIG_MPTCP_IPV6=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_MPTCP_DIAG=m
+CONFIG_VETH=y
+CONFIG_NET_SCH_NETEM=m
+CONFIG_SYN_COOKIES=y
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
new file mode 100755
index 000000000..34577d469
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -0,0 +1,125 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(dirname "${0}")/mptcp_lib.sh"
+
+rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+ns="ns1-$rndh"
+ksft_skip=4
+test_cnt=1
+ret=0
+pids=()
+
+flush_pids()
+{
+	# mptcp_connect in join mode will sleep a bit before completing,
+	# give it some time
+	sleep 1.1
+
+	for pid in ${pids[@]}; do
+		[ -d /proc/$pid ] && kill -SIGUSR1 $pid >/dev/null 2>&1
+	done
+	pids=()
+}
+
+cleanup()
+{
+	ip netns del $ns
+	for pid in ${pids[@]}; do
+		[ -d /proc/$pid ] && kill -9 $pid >/dev/null 2>&1
+	done
+}
+
+mptcp_lib_check_mptcp
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+ss -h | grep -q MPTCP
+if [ $? -ne 0 ];then
+	echo "SKIP: ss tool does not support MPTCP"
+	exit $ksft_skip
+fi
+
+__chk_nr()
+{
+	local condition="$1"
+	local expected=$2
+	local msg nr
+
+	shift 2
+	msg=$*
+	nr=$(ss -inmHMN $ns | $condition)
+
+	printf "%-50s" "$msg"
+	if [ $nr != $expected ]; then
+		echo "[ fail ] expected $expected found $nr"
+		ret=$test_cnt
+	else
+		echo "[  ok  ]"
+	fi
+	test_cnt=$((test_cnt+1))
+}
+
+chk_msk_nr()
+{
+	__chk_nr "grep -c token:" $*
+}
+
+chk_msk_fallback_nr()
+{
+		__chk_nr "grep -c fallback" $*
+}
+
+chk_msk_remote_key_nr()
+{
+		__chk_nr "grep -c remote_key" $*
+}
+
+
+trap cleanup EXIT
+ip netns add $ns
+ip -n $ns link set dev lo up
+
+echo "a" | ip netns exec $ns ./mptcp_connect -p 10000 -l 0.0.0.0 -t 100 >/dev/null &
+sleep 0.1
+pids[0]=$!
+chk_msk_nr 0 "no msk on netns creation"
+
+echo "b" | ip netns exec $ns ./mptcp_connect -p 10000 127.0.0.1 -j -t 100 >/dev/null &
+sleep 0.1
+pids[1]=$!
+chk_msk_nr 2 "after MPC handshake "
+chk_msk_remote_key_nr 2 "....chk remote_key"
+chk_msk_fallback_nr 0 "....chk no fallback"
+flush_pids
+
+
+echo "a" | ip netns exec $ns ./mptcp_connect -p 10001 -s TCP -l 0.0.0.0 -t 100 >/dev/null &
+pids[0]=$!
+sleep 0.1
+echo "b" | ip netns exec $ns ./mptcp_connect -p 10001 127.0.0.1 -j -t 100 >/dev/null &
+pids[1]=$!
+sleep 0.1
+chk_msk_fallback_nr 1 "check fallback"
+flush_pids
+
+NR_CLIENTS=100
+for I in `seq 1 $NR_CLIENTS`; do
+	echo "a" | ip netns exec $ns ./mptcp_connect -p $((I+10001)) -l 0.0.0.0 -t 100 -w 10 >/dev/null  &
+	pids[$((I*2))]=$!
+done
+sleep 0.1
+
+for I in `seq 1 $NR_CLIENTS`; do
+	echo "b" | ip netns exec $ns ./mptcp_connect -p $((I+10001)) 127.0.0.1 -t 100 -w 10 >/dev/null &
+	pids[$((I*2 + 1))]=$!
+done
+sleep 1.5
+
+chk_msk_nr $((NR_CLIENTS*2)) "many msk socket present"
+flush_pids
+
+exit $ret
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c
new file mode 100644
index 000000000..37c1ec888
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c
@@ -0,0 +1,912 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <errno.h>
+#include <limits.h>
+#include <fcntl.h>
+#include <string.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <strings.h>
+#include <signal.h>
+#include <unistd.h>
+
+#include <sys/poll.h>
+#include <sys/random.h>
+#include <sys/sendfile.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <sys/mman.h>
+
+#include <netdb.h>
+#include <netinet/in.h>
+
+#include <linux/tcp.h>
+
+extern int optind;
+
+#ifndef IPPROTO_MPTCP
+#define IPPROTO_MPTCP 262
+#endif
+#ifndef TCP_ULP
+#define TCP_ULP 31
+#endif
+
+static int  poll_timeout = 10 * 1000;
+static bool listen_mode;
+static bool quit;
+
+enum cfg_mode {
+	CFG_MODE_POLL,
+	CFG_MODE_MMAP,
+	CFG_MODE_SENDFILE,
+};
+
+static enum cfg_mode cfg_mode = CFG_MODE_POLL;
+static const char *cfg_host;
+static const char *cfg_port	= "12000";
+static int cfg_sock_proto	= IPPROTO_MPTCP;
+static bool tcpulp_audit;
+static int pf = AF_INET;
+static int cfg_sndbuf;
+static int cfg_rcvbuf;
+static bool cfg_join;
+static bool cfg_remove;
+static int cfg_wait;
+
+static void die_usage(void)
+{
+	fprintf(stderr, "Usage: mptcp_connect [-6] [-u] [-s MPTCP|TCP] [-p port] [-m mode]"
+		"[-l] [-w sec] connect_address\n");
+	fprintf(stderr, "\t-6 use ipv6\n");
+	fprintf(stderr, "\t-t num -- set poll timeout to num\n");
+	fprintf(stderr, "\t-S num -- set SO_SNDBUF to num\n");
+	fprintf(stderr, "\t-R num -- set SO_RCVBUF to num\n");
+	fprintf(stderr, "\t-p num -- use port num\n");
+	fprintf(stderr, "\t-s [MPTCP|TCP] -- use mptcp(default) or tcp sockets\n");
+	fprintf(stderr, "\t-m [poll|mmap|sendfile] -- use poll(default)/mmap+write/sendfile\n");
+	fprintf(stderr, "\t-u -- check mptcp ulp\n");
+	fprintf(stderr, "\t-w num -- wait num sec before closing the socket\n");
+	exit(1);
+}
+
+static void handle_signal(int nr)
+{
+	quit = true;
+}
+
+static const char *getxinfo_strerr(int err)
+{
+	if (err == EAI_SYSTEM)
+		return strerror(errno);
+
+	return gai_strerror(err);
+}
+
+static void xgetnameinfo(const struct sockaddr *addr, socklen_t addrlen,
+			 char *host, socklen_t hostlen,
+			 char *serv, socklen_t servlen)
+{
+	int flags = NI_NUMERICHOST | NI_NUMERICSERV;
+	int err = getnameinfo(addr, addrlen, host, hostlen, serv, servlen,
+			      flags);
+
+	if (err) {
+		const char *errstr = getxinfo_strerr(err);
+
+		fprintf(stderr, "Fatal: getnameinfo: %s\n", errstr);
+		exit(1);
+	}
+}
+
+static void xgetaddrinfo(const char *node, const char *service,
+			 const struct addrinfo *hints,
+			 struct addrinfo **res)
+{
+	int err = getaddrinfo(node, service, hints, res);
+
+	if (err) {
+		const char *errstr = getxinfo_strerr(err);
+
+		fprintf(stderr, "Fatal: getaddrinfo(%s:%s): %s\n",
+			node ? node : "", service ? service : "", errstr);
+		exit(1);
+	}
+}
+
+static void set_rcvbuf(int fd, unsigned int size)
+{
+	int err;
+
+	err = setsockopt(fd, SOL_SOCKET, SO_RCVBUF, &size, sizeof(size));
+	if (err) {
+		perror("set SO_RCVBUF");
+		exit(1);
+	}
+}
+
+static void set_sndbuf(int fd, unsigned int size)
+{
+	int err;
+
+	err = setsockopt(fd, SOL_SOCKET, SO_SNDBUF, &size, sizeof(size));
+	if (err) {
+		perror("set SO_SNDBUF");
+		exit(1);
+	}
+}
+
+static int sock_listen_mptcp(const char * const listenaddr,
+			     const char * const port)
+{
+	int sock;
+	struct addrinfo hints = {
+		.ai_protocol = IPPROTO_TCP,
+		.ai_socktype = SOCK_STREAM,
+		.ai_flags = AI_PASSIVE | AI_NUMERICHOST
+	};
+
+	hints.ai_family = pf;
+
+	struct addrinfo *a, *addr;
+	int one = 1;
+
+	xgetaddrinfo(listenaddr, port, &hints, &addr);
+	hints.ai_family = pf;
+
+	for (a = addr; a; a = a->ai_next) {
+		sock = socket(a->ai_family, a->ai_socktype, cfg_sock_proto);
+		if (sock < 0)
+			continue;
+
+		if (-1 == setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &one,
+				     sizeof(one)))
+			perror("setsockopt");
+
+		if (bind(sock, a->ai_addr, a->ai_addrlen) == 0)
+			break; /* success */
+
+		perror("bind");
+		close(sock);
+		sock = -1;
+	}
+
+	freeaddrinfo(addr);
+
+	if (sock < 0) {
+		fprintf(stderr, "Could not create listen socket\n");
+		return sock;
+	}
+
+	if (listen(sock, 20)) {
+		perror("listen");
+		close(sock);
+		return -1;
+	}
+
+	return sock;
+}
+
+static bool sock_test_tcpulp(const char * const remoteaddr,
+			     const char * const port)
+{
+	struct addrinfo hints = {
+		.ai_protocol = IPPROTO_TCP,
+		.ai_socktype = SOCK_STREAM,
+	};
+	struct addrinfo *a, *addr;
+	int sock = -1, ret = 0;
+	bool test_pass = false;
+
+	hints.ai_family = AF_INET;
+
+	xgetaddrinfo(remoteaddr, port, &hints, &addr);
+	for (a = addr; a; a = a->ai_next) {
+		sock = socket(a->ai_family, a->ai_socktype, IPPROTO_TCP);
+		if (sock < 0) {
+			perror("socket");
+			continue;
+		}
+		ret = setsockopt(sock, IPPROTO_TCP, TCP_ULP, "mptcp",
+				 sizeof("mptcp"));
+		if (ret == -1 && errno == EOPNOTSUPP)
+			test_pass = true;
+		close(sock);
+
+		if (test_pass)
+			break;
+		if (!ret)
+			fprintf(stderr,
+				"setsockopt(TCP_ULP) returned 0\n");
+		else
+			perror("setsockopt(TCP_ULP)");
+	}
+	return test_pass;
+}
+
+static int sock_connect_mptcp(const char * const remoteaddr,
+			      const char * const port, int proto)
+{
+	struct addrinfo hints = {
+		.ai_protocol = IPPROTO_TCP,
+		.ai_socktype = SOCK_STREAM,
+	};
+	struct addrinfo *a, *addr;
+	int sock = -1;
+
+	hints.ai_family = pf;
+
+	xgetaddrinfo(remoteaddr, port, &hints, &addr);
+	for (a = addr; a; a = a->ai_next) {
+		sock = socket(a->ai_family, a->ai_socktype, proto);
+		if (sock < 0) {
+			perror("socket");
+			continue;
+		}
+
+		if (connect(sock, a->ai_addr, a->ai_addrlen) == 0)
+			break; /* success */
+
+		perror("connect()");
+		close(sock);
+		sock = -1;
+	}
+
+	freeaddrinfo(addr);
+	return sock;
+}
+
+static size_t do_rnd_write(const int fd, char *buf, const size_t len)
+{
+	static bool first = true;
+	unsigned int do_w;
+	ssize_t bw;
+
+	do_w = rand() & 0xffff;
+	if (do_w == 0 || do_w > len)
+		do_w = len;
+
+	if (cfg_join && first && do_w > 100)
+		do_w = 100;
+
+	if (cfg_remove && do_w > 50)
+		do_w = 50;
+
+	bw = write(fd, buf, do_w);
+	if (bw < 0)
+		perror("write");
+
+	/* let the join handshake complete, before going on */
+	if (cfg_join && first) {
+		usleep(200000);
+		first = false;
+	}
+
+	if (cfg_remove)
+		usleep(200000);
+
+	return bw;
+}
+
+static size_t do_write(const int fd, char *buf, const size_t len)
+{
+	size_t offset = 0;
+
+	while (offset < len) {
+		size_t written;
+		ssize_t bw;
+
+		bw = write(fd, buf + offset, len - offset);
+		if (bw < 0) {
+			perror("write");
+			return 0;
+		}
+
+		written = (size_t)bw;
+		offset += written;
+	}
+
+	return offset;
+}
+
+static ssize_t do_rnd_read(const int fd, char *buf, const size_t len)
+{
+	size_t cap = rand();
+
+	cap &= 0xffff;
+
+	if (cap == 0)
+		cap = 1;
+	else if (cap > len)
+		cap = len;
+
+	return read(fd, buf, cap);
+}
+
+static void set_nonblock(int fd)
+{
+	int flags = fcntl(fd, F_GETFL);
+
+	if (flags == -1)
+		return;
+
+	fcntl(fd, F_SETFL, flags | O_NONBLOCK);
+}
+
+static int copyfd_io_poll(int infd, int peerfd, int outfd)
+{
+	struct pollfd fds = {
+		.fd = peerfd,
+		.events = POLLIN | POLLOUT,
+	};
+	unsigned int woff = 0, wlen = 0;
+	char wbuf[8192];
+
+	set_nonblock(peerfd);
+
+	for (;;) {
+		char rbuf[8192];
+		ssize_t len;
+
+		if (fds.events == 0)
+			break;
+
+		switch (poll(&fds, 1, poll_timeout)) {
+		case -1:
+			if (errno == EINTR)
+				continue;
+			perror("poll");
+			return 1;
+		case 0:
+			fprintf(stderr, "%s: poll timed out (events: "
+				"POLLIN %u, POLLOUT %u)\n", __func__,
+				fds.events & POLLIN, fds.events & POLLOUT);
+			return 2;
+		}
+
+		if (fds.revents & POLLIN) {
+			len = do_rnd_read(peerfd, rbuf, sizeof(rbuf));
+			if (len == 0) {
+				/* no more data to receive:
+				 * peer has closed its write side
+				 */
+				fds.events &= ~POLLIN;
+
+				if ((fds.events & POLLOUT) == 0)
+					/* and nothing more to send */
+					break;
+
+			/* Else, still have data to transmit */
+			} else if (len < 0) {
+				perror("read");
+				return 3;
+			}
+
+			do_write(outfd, rbuf, len);
+		}
+
+		if (fds.revents & POLLOUT) {
+			if (wlen == 0) {
+				woff = 0;
+				wlen = read(infd, wbuf, sizeof(wbuf));
+			}
+
+			if (wlen > 0) {
+				ssize_t bw;
+
+				bw = do_rnd_write(peerfd, wbuf + woff, wlen);
+				if (bw < 0)
+					return 111;
+
+				woff += bw;
+				wlen -= bw;
+			} else if (wlen == 0) {
+				/* We have no more data to send. */
+				fds.events &= ~POLLOUT;
+
+				if ((fds.events & POLLIN) == 0)
+					/* ... and peer also closed already */
+					break;
+
+				/* ... but we still receive.
+				 * Close our write side, ev. give some time
+				 * for address notification and/or checking
+				 * the current status
+				 */
+				if (cfg_wait)
+					usleep(cfg_wait);
+				shutdown(peerfd, SHUT_WR);
+			} else {
+				if (errno == EINTR)
+					continue;
+				perror("read");
+				return 4;
+			}
+		}
+
+		if (fds.revents & (POLLERR | POLLNVAL)) {
+			fprintf(stderr, "Unexpected revents: "
+				"POLLERR/POLLNVAL(%x)\n", fds.revents);
+			return 5;
+		}
+	}
+
+	/* leave some time for late join/announce */
+	if (cfg_join || cfg_remove)
+		usleep(cfg_wait);
+
+	close(peerfd);
+	return 0;
+}
+
+static int do_recvfile(int infd, int outfd)
+{
+	ssize_t r;
+
+	do {
+		char buf[16384];
+
+		r = do_rnd_read(infd, buf, sizeof(buf));
+		if (r > 0) {
+			if (write(outfd, buf, r) != r)
+				break;
+		} else if (r < 0) {
+			perror("read");
+		}
+	} while (r > 0);
+
+	return (int)r;
+}
+
+static int do_mmap(int infd, int outfd, unsigned int size)
+{
+	char *inbuf = mmap(NULL, size, PROT_READ, MAP_SHARED, infd, 0);
+	ssize_t ret = 0, off = 0;
+	size_t rem;
+
+	if (inbuf == MAP_FAILED) {
+		perror("mmap");
+		return 1;
+	}
+
+	rem = size;
+
+	while (rem > 0) {
+		ret = write(outfd, inbuf + off, rem);
+
+		if (ret < 0) {
+			perror("write");
+			break;
+		}
+
+		off += ret;
+		rem -= ret;
+	}
+
+	munmap(inbuf, size);
+	return rem;
+}
+
+static int get_infd_size(int fd)
+{
+	struct stat sb;
+	ssize_t count;
+	int err;
+
+	err = fstat(fd, &sb);
+	if (err < 0) {
+		perror("fstat");
+		return -1;
+	}
+
+	if ((sb.st_mode & S_IFMT) != S_IFREG) {
+		fprintf(stderr, "%s: stdin is not a regular file\n", __func__);
+		return -2;
+	}
+
+	count = sb.st_size;
+	if (count > INT_MAX) {
+		fprintf(stderr, "File too large: %zu\n", count);
+		return -3;
+	}
+
+	return (int)count;
+}
+
+static int do_sendfile(int infd, int outfd, unsigned int count)
+{
+	while (count > 0) {
+		ssize_t r;
+
+		r = sendfile(outfd, infd, NULL, count);
+		if (r < 0) {
+			perror("sendfile");
+			return 3;
+		}
+
+		count -= r;
+	}
+
+	return 0;
+}
+
+static int copyfd_io_mmap(int infd, int peerfd, int outfd,
+			  unsigned int size)
+{
+	int err;
+
+	if (listen_mode) {
+		err = do_recvfile(peerfd, outfd);
+		if (err)
+			return err;
+
+		err = do_mmap(infd, peerfd, size);
+	} else {
+		err = do_mmap(infd, peerfd, size);
+		if (err)
+			return err;
+
+		shutdown(peerfd, SHUT_WR);
+
+		err = do_recvfile(peerfd, outfd);
+	}
+
+	return err;
+}
+
+static int copyfd_io_sendfile(int infd, int peerfd, int outfd,
+			      unsigned int size)
+{
+	int err;
+
+	if (listen_mode) {
+		err = do_recvfile(peerfd, outfd);
+		if (err)
+			return err;
+
+		err = do_sendfile(infd, peerfd, size);
+	} else {
+		err = do_sendfile(infd, peerfd, size);
+		if (err)
+			return err;
+		err = do_recvfile(peerfd, outfd);
+	}
+
+	return err;
+}
+
+static int copyfd_io(int infd, int peerfd, int outfd)
+{
+	int file_size;
+
+	switch (cfg_mode) {
+	case CFG_MODE_POLL:
+		return copyfd_io_poll(infd, peerfd, outfd);
+	case CFG_MODE_MMAP:
+		file_size = get_infd_size(infd);
+		if (file_size < 0)
+			return file_size;
+		return copyfd_io_mmap(infd, peerfd, outfd, file_size);
+	case CFG_MODE_SENDFILE:
+		file_size = get_infd_size(infd);
+		if (file_size < 0)
+			return file_size;
+		return copyfd_io_sendfile(infd, peerfd, outfd, file_size);
+	}
+
+	fprintf(stderr, "Invalid mode %d\n", cfg_mode);
+
+	die_usage();
+	return 1;
+}
+
+static void check_sockaddr(int pf, struct sockaddr_storage *ss,
+			   socklen_t salen)
+{
+	struct sockaddr_in6 *sin6;
+	struct sockaddr_in *sin;
+	socklen_t wanted_size = 0;
+
+	switch (pf) {
+	case AF_INET:
+		wanted_size = sizeof(*sin);
+		sin = (void *)ss;
+		if (!sin->sin_port)
+			fprintf(stderr, "accept: something wrong: ip connection from port 0");
+		break;
+	case AF_INET6:
+		wanted_size = sizeof(*sin6);
+		sin6 = (void *)ss;
+		if (!sin6->sin6_port)
+			fprintf(stderr, "accept: something wrong: ipv6 connection from port 0");
+		break;
+	default:
+		fprintf(stderr, "accept: Unknown pf %d, salen %u\n", pf, salen);
+		return;
+	}
+
+	if (salen != wanted_size)
+		fprintf(stderr, "accept: size mismatch, got %d expected %d\n",
+			(int)salen, wanted_size);
+
+	if (ss->ss_family != pf)
+		fprintf(stderr, "accept: pf mismatch, expect %d, ss_family is %d\n",
+			(int)ss->ss_family, pf);
+}
+
+static void check_getpeername(int fd, struct sockaddr_storage *ss, socklen_t salen)
+{
+	struct sockaddr_storage peerss;
+	socklen_t peersalen = sizeof(peerss);
+
+	if (getpeername(fd, (struct sockaddr *)&peerss, &peersalen) < 0) {
+		perror("getpeername");
+		return;
+	}
+
+	if (peersalen != salen) {
+		fprintf(stderr, "%s: %d vs %d\n", __func__, peersalen, salen);
+		return;
+	}
+
+	if (memcmp(ss, &peerss, peersalen)) {
+		char a[INET6_ADDRSTRLEN];
+		char b[INET6_ADDRSTRLEN];
+		char c[INET6_ADDRSTRLEN];
+		char d[INET6_ADDRSTRLEN];
+
+		xgetnameinfo((struct sockaddr *)ss, salen,
+			     a, sizeof(a), b, sizeof(b));
+
+		xgetnameinfo((struct sockaddr *)&peerss, peersalen,
+			     c, sizeof(c), d, sizeof(d));
+
+		fprintf(stderr, "%s: memcmp failure: accept %s vs peername %s, %s vs %s salen %d vs %d\n",
+			__func__, a, c, b, d, peersalen, salen);
+	}
+}
+
+static void check_getpeername_connect(int fd)
+{
+	struct sockaddr_storage ss;
+	socklen_t salen = sizeof(ss);
+	char a[INET6_ADDRSTRLEN];
+	char b[INET6_ADDRSTRLEN];
+
+	if (getpeername(fd, (struct sockaddr *)&ss, &salen) < 0) {
+		perror("getpeername");
+		return;
+	}
+
+	xgetnameinfo((struct sockaddr *)&ss, salen,
+		     a, sizeof(a), b, sizeof(b));
+
+	if (strcmp(cfg_host, a) || strcmp(cfg_port, b))
+		fprintf(stderr, "%s: %s vs %s, %s vs %s\n", __func__,
+			cfg_host, a, cfg_port, b);
+}
+
+static void maybe_close(int fd)
+{
+	unsigned int r = rand();
+
+	if (!(cfg_join || cfg_remove) && (r & 1))
+		close(fd);
+}
+
+int main_loop_s(int listensock)
+{
+	struct sockaddr_storage ss;
+	struct pollfd polls;
+	socklen_t salen;
+	int remotesock;
+
+	polls.fd = listensock;
+	polls.events = POLLIN;
+
+	switch (poll(&polls, 1, poll_timeout)) {
+	case -1:
+		perror("poll");
+		return 1;
+	case 0:
+		fprintf(stderr, "%s: timed out\n", __func__);
+		close(listensock);
+		return 2;
+	}
+
+	salen = sizeof(ss);
+	remotesock = accept(listensock, (struct sockaddr *)&ss, &salen);
+	if (remotesock >= 0) {
+		maybe_close(listensock);
+		check_sockaddr(pf, &ss, salen);
+		check_getpeername(remotesock, &ss, salen);
+
+		return copyfd_io(0, remotesock, 1);
+	}
+
+	perror("accept");
+
+	return 1;
+}
+
+static void init_rng(void)
+{
+	unsigned int foo;
+
+	if (getrandom(&foo, sizeof(foo), 0) == -1) {
+		perror("getrandom");
+		exit(1);
+	}
+
+	srand(foo);
+}
+
+int main_loop(void)
+{
+	int fd;
+
+	/* listener is ready. */
+	fd = sock_connect_mptcp(cfg_host, cfg_port, cfg_sock_proto);
+	if (fd < 0)
+		return 2;
+
+	check_getpeername_connect(fd);
+
+	if (cfg_rcvbuf)
+		set_rcvbuf(fd, cfg_rcvbuf);
+	if (cfg_sndbuf)
+		set_sndbuf(fd, cfg_sndbuf);
+
+	return copyfd_io(0, fd, 1);
+}
+
+int parse_proto(const char *proto)
+{
+	if (!strcasecmp(proto, "MPTCP"))
+		return IPPROTO_MPTCP;
+	if (!strcasecmp(proto, "TCP"))
+		return IPPROTO_TCP;
+
+	fprintf(stderr, "Unknown protocol: %s\n.", proto);
+	die_usage();
+
+	/* silence compiler warning */
+	return 0;
+}
+
+int parse_mode(const char *mode)
+{
+	if (!strcasecmp(mode, "poll"))
+		return CFG_MODE_POLL;
+	if (!strcasecmp(mode, "mmap"))
+		return CFG_MODE_MMAP;
+	if (!strcasecmp(mode, "sendfile"))
+		return CFG_MODE_SENDFILE;
+
+	fprintf(stderr, "Unknown test mode: %s\n", mode);
+	fprintf(stderr, "Supported modes are:\n");
+	fprintf(stderr, "\t\t\"poll\" - interleaved read/write using poll()\n");
+	fprintf(stderr, "\t\t\"mmap\" - send entire input file (mmap+write), then read response (-l will read input first)\n");
+	fprintf(stderr, "\t\t\"sendfile\" - send entire input file (sendfile), then read response (-l will read input first)\n");
+
+	die_usage();
+
+	/* silence compiler warning */
+	return 0;
+}
+
+static int parse_int(const char *size)
+{
+	unsigned long s;
+
+	errno = 0;
+
+	s = strtoul(size, NULL, 0);
+
+	if (errno) {
+		fprintf(stderr, "Invalid sndbuf size %s (%s)\n",
+			size, strerror(errno));
+		die_usage();
+	}
+
+	if (s > INT_MAX) {
+		fprintf(stderr, "Invalid sndbuf size %s (%s)\n",
+			size, strerror(ERANGE));
+		die_usage();
+	}
+
+	return (int)s;
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c;
+
+	while ((c = getopt(argc, argv, "6jrlp:s:hut:m:S:R:w:")) != -1) {
+		switch (c) {
+		case 'j':
+			cfg_join = true;
+			cfg_mode = CFG_MODE_POLL;
+			cfg_wait = 400000;
+			break;
+		case 'r':
+			cfg_remove = true;
+			cfg_mode = CFG_MODE_POLL;
+			cfg_wait = 400000;
+			break;
+		case 'l':
+			listen_mode = true;
+			break;
+		case 'p':
+			cfg_port = optarg;
+			break;
+		case 's':
+			cfg_sock_proto = parse_proto(optarg);
+			break;
+		case 'h':
+			die_usage();
+			break;
+		case 'u':
+			tcpulp_audit = true;
+			break;
+		case '6':
+			pf = AF_INET6;
+			break;
+		case 't':
+			poll_timeout = atoi(optarg) * 1000;
+			if (poll_timeout <= 0)
+				poll_timeout = -1;
+			break;
+		case 'm':
+			cfg_mode = parse_mode(optarg);
+			break;
+		case 'S':
+			cfg_sndbuf = parse_int(optarg);
+			break;
+		case 'R':
+			cfg_rcvbuf = parse_int(optarg);
+			break;
+		case 'w':
+			cfg_wait = atoi(optarg)*1000000;
+			break;
+		}
+	}
+
+	if (optind + 1 != argc)
+		die_usage();
+	cfg_host = argv[optind];
+
+	if (strchr(cfg_host, ':'))
+		pf = AF_INET6;
+}
+
+int main(int argc, char *argv[])
+{
+	init_rng();
+
+	signal(SIGUSR1, handle_signal);
+	parse_opts(argc, argv);
+
+	if (tcpulp_audit)
+		return sock_test_tcpulp(cfg_host, cfg_port) ? 0 : 1;
+
+	if (listen_mode) {
+		int fd = sock_listen_mptcp(cfg_host, cfg_port);
+
+		if (fd < 0)
+			return 1;
+
+		if (cfg_rcvbuf)
+			set_rcvbuf(fd, cfg_rcvbuf);
+		if (cfg_sndbuf)
+			set_sndbuf(fd, cfg_sndbuf);
+
+		return main_loop_s(fd);
+	}
+
+	return main_loop();
+}
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
new file mode 100755
index 000000000..fb89298bd
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -0,0 +1,697 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(dirname "${0}")/mptcp_lib.sh"
+
+time_start=$(date +%s)
+
+optstring="S:R:d:e:l:r:h4cm:f:t"
+ret=0
+sin=""
+sout=""
+cin=""
+cout=""
+ksft_skip=4
+capture=false
+timeout=30
+ipv6=true
+ethtool_random_on=true
+tc_delay="$((RANDOM%50))"
+tc_loss=$((RANDOM%101))
+testmode=""
+sndbuf=0
+rcvbuf=0
+options_log=true
+do_tcp=0
+filesize=0
+
+if [ $tc_loss -eq 100 ];then
+	tc_loss=1%
+elif [ $tc_loss -ge 10 ]; then
+	tc_loss=0.$tc_loss%
+elif [ $tc_loss -ge 1 ]; then
+	tc_loss=0.0$tc_loss%
+else
+	tc_loss=""
+fi
+
+usage() {
+	echo "Usage: $0 [ -a ]"
+	echo -e "\t-d: tc/netem delay in milliseconds, e.g. \"-d 10\" (default random)"
+	echo -e "\t-l: tc/netem loss percentage, e.g. \"-l 0.02\" (default random)"
+	echo -e "\t-r: tc/netem reorder mode, e.g. \"-r 25% 50% gap 5\", use "-r 0" to disable reordering (default random)"
+	echo -e "\t-e: ethtool features to disable, e.g.: \"-e tso -e gso\" (default: randomly disable any of tso/gso/gro)"
+	echo -e "\t-4: IPv4 only: disable IPv6 tests (default: test both IPv4 and IPv6)"
+	echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)"
+	echo -e "\t-f: size of file to transfer in bytes (default random)"
+	echo -e "\t-S: set sndbuf value (default: use kernel default)"
+	echo -e "\t-R: set rcvbuf value (default: use kernel default)"
+	echo -e "\t-m: test mode (poll, sendfile; default: poll)"
+	echo -e "\t-t: also run tests with TCP (use twice to non-fallback tcp)"
+}
+
+while getopts "$optstring" option;do
+	case "$option" in
+	"h")
+		usage $0
+		exit 0
+		;;
+	"d")
+		if [ $OPTARG -ge 0 ];then
+			tc_delay="$OPTARG"
+		else
+			echo "-d requires numeric argument, got \"$OPTARG\"" 1>&2
+			exit 1
+		fi
+		;;
+	"e")
+		ethtool_args="$ethtool_args $OPTARG off"
+		ethtool_random_on=false
+		;;
+	"l")
+		tc_loss="$OPTARG"
+		;;
+	"r")
+		tc_reorder="$OPTARG"
+		;;
+	"4")
+		ipv6=false
+		;;
+	"c")
+		capture=true
+		;;
+	"S")
+		if [ $OPTARG -ge 0 ];then
+			sndbuf="$OPTARG"
+		else
+			echo "-S requires numeric argument, got \"$OPTARG\"" 1>&2
+			exit 1
+		fi
+		;;
+	"R")
+		if [ $OPTARG -ge 0 ];then
+			rcvbuf="$OPTARG"
+		else
+			echo "-R requires numeric argument, got \"$OPTARG\"" 1>&2
+			exit 1
+		fi
+		;;
+	"m")
+		testmode="$OPTARG"
+		;;
+	"f")
+		filesize="$OPTARG"
+		;;
+	"t")
+		do_tcp=$((do_tcp+1))
+		;;
+	"?")
+		usage $0
+		exit 1
+		;;
+	esac
+done
+
+sec=$(date +%s)
+rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+ns1="ns1-$rndh"
+ns2="ns2-$rndh"
+ns3="ns3-$rndh"
+ns4="ns4-$rndh"
+
+TEST_COUNT=0
+
+cleanup()
+{
+	rm -f "$cin" "$cout"
+	rm -f "$sin" "$sout"
+	rm -f "$capout"
+
+	local netns
+	for netns in "$ns1" "$ns2" "$ns3" "$ns4";do
+		ip netns del $netns
+	done
+}
+
+mptcp_lib_check_mptcp
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+sin=$(mktemp)
+sout=$(mktemp)
+cin=$(mktemp)
+cout=$(mktemp)
+capout=$(mktemp)
+trap cleanup EXIT
+
+for i in "$ns1" "$ns2" "$ns3" "$ns4";do
+	ip netns add $i || exit $ksft_skip
+	ip -net $i link set lo up
+done
+
+#  "$ns1"              ns2                    ns3                     ns4
+# ns1eth2    ns2eth1   ns2eth3      ns3eth2   ns3eth4       ns4eth3
+#                           - drop 1% ->            reorder 25%
+#                           <- TSO off -
+
+ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth1 netns "$ns2"
+ip link add ns2eth3 netns "$ns2" type veth peer name ns3eth2 netns "$ns3"
+ip link add ns3eth4 netns "$ns3" type veth peer name ns4eth3 netns "$ns4"
+
+ip -net "$ns1" addr add 10.0.1.1/24 dev ns1eth2
+ip -net "$ns1" addr add dead:beef:1::1/64 dev ns1eth2 nodad
+
+ip -net "$ns1" link set ns1eth2 up
+ip -net "$ns1" route add default via 10.0.1.2
+ip -net "$ns1" route add default via dead:beef:1::2
+
+ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1
+ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad
+ip -net "$ns2" link set ns2eth1 up
+
+ip -net "$ns2" addr add 10.0.2.1/24 dev ns2eth3
+ip -net "$ns2" addr add dead:beef:2::1/64 dev ns2eth3 nodad
+ip -net "$ns2" link set ns2eth3 up
+ip -net "$ns2" route add default via 10.0.2.2
+ip -net "$ns2" route add default via dead:beef:2::2
+ip netns exec "$ns2" sysctl -q net.ipv4.ip_forward=1
+ip netns exec "$ns2" sysctl -q net.ipv6.conf.all.forwarding=1
+
+ip -net "$ns3" addr add 10.0.2.2/24 dev ns3eth2
+ip -net "$ns3" addr add dead:beef:2::2/64 dev ns3eth2 nodad
+ip -net "$ns3" link set ns3eth2 up
+
+ip -net "$ns3" addr add 10.0.3.2/24 dev ns3eth4
+ip -net "$ns3" addr add dead:beef:3::2/64 dev ns3eth4 nodad
+ip -net "$ns3" link set ns3eth4 up
+ip -net "$ns3" route add default via 10.0.2.1
+ip -net "$ns3" route add default via dead:beef:2::1
+ip netns exec "$ns3" sysctl -q net.ipv4.ip_forward=1
+ip netns exec "$ns3" sysctl -q net.ipv6.conf.all.forwarding=1
+
+ip -net "$ns4" addr add 10.0.3.1/24 dev ns4eth3
+ip -net "$ns4" addr add dead:beef:3::1/64 dev ns4eth3 nodad
+ip -net "$ns4" link set ns4eth3 up
+ip -net "$ns4" route add default via 10.0.3.2
+ip -net "$ns4" route add default via dead:beef:3::2
+
+set_ethtool_flags() {
+	local ns="$1"
+	local dev="$2"
+	local flags="$3"
+
+	ip netns exec $ns ethtool -K $dev $flags 2>/dev/null
+	[ $? -eq 0 ] && echo "INFO: set $ns dev $dev: ethtool -K $flags"
+}
+
+set_random_ethtool_flags() {
+	local flags=""
+	local r=$RANDOM
+
+	local pick1=$((r & 1))
+	local pick2=$((r & 2))
+	local pick3=$((r & 4))
+
+	[ $pick1 -ne 0 ] && flags="tso off"
+	[ $pick2 -ne 0 ] && flags="$flags gso off"
+	[ $pick3 -ne 0 ] && flags="$flags gro off"
+
+	[ -z "$flags" ] && return
+
+	set_ethtool_flags "$1" "$2" "$flags"
+}
+
+if $ethtool_random_on;then
+	set_random_ethtool_flags "$ns3" ns3eth2
+	set_random_ethtool_flags "$ns4" ns4eth3
+else
+	set_ethtool_flags "$ns3" ns3eth2 "$ethtool_args"
+	set_ethtool_flags "$ns4" ns4eth3 "$ethtool_args"
+fi
+
+print_file_err()
+{
+	ls -l "$1" 1>&2
+	echo "Trailing bytes are: "
+	tail -c 27 "$1"
+}
+
+check_transfer()
+{
+	local in=$1
+	local out=$2
+	local what=$3
+
+	cmp "$in" "$out" > /dev/null 2>&1
+	if [ $? -ne 0 ] ;then
+		echo "[ FAIL ] $what does not match (in, out):"
+		print_file_err "$in"
+		print_file_err "$out"
+
+		return 1
+	fi
+
+	return 0
+}
+
+check_mptcp_disabled()
+{
+	local disabled_ns
+	disabled_ns="ns_disabled-$sech-$(mktemp -u XXXXXX)"
+	ip netns add ${disabled_ns} || exit $ksft_skip
+
+	# net.mptcp.enabled should be enabled by default
+	if [ "$(ip netns exec ${disabled_ns} sysctl net.mptcp.enabled | awk '{ print $3 }')" -ne 1 ]; then
+		echo -e "net.mptcp.enabled sysctl is not 1 by default\t\t[ FAIL ]"
+		ret=1
+		return 1
+	fi
+	ip netns exec ${disabled_ns} sysctl -q net.mptcp.enabled=0
+
+	local err=0
+	LANG=C ip netns exec ${disabled_ns} ./mptcp_connect -t $timeout -p 10000 -s MPTCP 127.0.0.1 < "$cin" 2>&1 | \
+		grep -q "^socket: Protocol not available$" && err=1
+	ip netns delete ${disabled_ns}
+
+	if [ ${err} -eq 0 ]; then
+		echo -e "New MPTCP socket cannot be blocked via sysctl\t\t[ FAIL ]"
+		ret=1
+		return 1
+	fi
+
+	echo -e "New MPTCP socket can be blocked via sysctl\t\t[ OK ]"
+	return 0
+}
+
+check_mptcp_ulp_setsockopt()
+{
+	local t retval
+	t="ns_ulp-$sech-$(mktemp -u XXXXXX)"
+
+	ip netns add ${t} || exit $ksft_skip
+	if ! ip netns exec ${t} ./mptcp_connect -u -p 10000 -s TCP 127.0.0.1 2>&1; then
+		printf "setsockopt(..., TCP_ULP, \"mptcp\", ...) allowed\t[ FAIL ]\n"
+		retval=1
+		ret=$retval
+	else
+		printf "setsockopt(..., TCP_ULP, \"mptcp\", ...) blocked\t[ OK ]\n"
+		retval=0
+	fi
+	ip netns del ${t}
+	return $retval
+}
+
+# $1: IP address
+is_v6()
+{
+	[ -z "${1##*:*}" ]
+}
+
+do_ping()
+{
+	local listener_ns="$1"
+	local connector_ns="$2"
+	local connect_addr="$3"
+	local ping_args="-q -c 1"
+
+	if is_v6 "${connect_addr}"; then
+		$ipv6 || return 0
+		ping_args="${ping_args} -6"
+	fi
+
+	ip netns exec ${connector_ns} ping ${ping_args} $connect_addr >/dev/null
+	if [ $? -ne 0 ] ; then
+		echo "$listener_ns -> $connect_addr connectivity [ FAIL ]" 1>&2
+		ret=1
+
+		return 1
+	fi
+
+	return 0
+}
+
+# $1: ns, $2: port
+wait_local_port_listen()
+{
+	local listener_ns="${1}"
+	local port="${2}"
+
+	local port_hex i
+
+	port_hex="$(printf "%04X" "${port}")"
+	for i in $(seq 10); do
+		ip netns exec "${listener_ns}" cat /proc/net/tcp* | \
+			awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" &&
+			break
+		sleep 0.1
+	done
+}
+
+do_transfer()
+{
+	local listener_ns="$1"
+	local connector_ns="$2"
+	local cl_proto="$3"
+	local srv_proto="$4"
+	local connect_addr="$5"
+	local local_addr="$6"
+	local extra_args=""
+
+	local port
+	port=$((10000+$TEST_COUNT))
+	TEST_COUNT=$((TEST_COUNT+1))
+
+	if [ "$rcvbuf" -gt 0 ]; then
+		extra_args="$extra_args -R $rcvbuf"
+	fi
+
+	if [ "$sndbuf" -gt 0 ]; then
+		extra_args="$extra_args -S $sndbuf"
+	fi
+
+	if [ -n "$testmode" ]; then
+		extra_args="$extra_args -m $testmode"
+	fi
+
+	if [ -n "$extra_args" ] && $options_log; then
+		options_log=false
+		echo "INFO: extra options: $extra_args"
+	fi
+
+	:> "$cout"
+	:> "$sout"
+	:> "$capout"
+
+	local addr_port
+	addr_port=$(printf "%s:%d" ${connect_addr} ${port})
+	printf "%.3s %-5s -> %.3s (%-20s) %-5s\t" ${connector_ns} ${cl_proto} ${listener_ns} ${addr_port} ${srv_proto}
+
+	if $capture; then
+		local capuser
+		if [ -z $SUDO_USER ] ; then
+			capuser=""
+		else
+			capuser="-Z $SUDO_USER"
+		fi
+
+		local capfile="${rndh}-${connector_ns:0:3}-${listener_ns:0:3}-${cl_proto}-${srv_proto}-${connect_addr}-${port}"
+		local capopt="-i any -s 65535 -B 32768 ${capuser}"
+
+		ip netns exec ${listener_ns}  tcpdump ${capopt} -w "${capfile}-listener.pcap"  >> "${capout}" 2>&1 &
+		local cappid_listener=$!
+
+		ip netns exec ${connector_ns} tcpdump ${capopt} -w "${capfile}-connector.pcap" >> "${capout}" 2>&1 &
+		local cappid_connector=$!
+
+		sleep 1
+	fi
+
+	local stat_synrx_last_l=$(ip netns exec ${listener_ns} nstat -z -a MPTcpExtMPCapableSYNRX | while read a count c rest ;do  echo $count;done)
+	local stat_ackrx_last_l=$(ip netns exec ${listener_ns} nstat -z -a MPTcpExtMPCapableACKRX | while read a count c rest ;do  echo $count;done)
+	local stat_cookietx_last=$(ip netns exec ${listener_ns} nstat -z -a TcpExtSyncookiesSent | while read a count c rest ;do  echo $count;done)
+	local stat_cookierx_last=$(ip netns exec ${listener_ns} nstat -z -a TcpExtSyncookiesRecv | while read a count c rest ;do  echo $count;done)
+
+	ip netns exec ${listener_ns} ./mptcp_connect -t $timeout -l -p $port -s ${srv_proto} $extra_args $local_addr < "$sin" > "$sout" &
+	local spid=$!
+
+	wait_local_port_listen "${listener_ns}" "${port}"
+
+	local start
+	start=$(date +%s%3N)
+	ip netns exec ${connector_ns} ./mptcp_connect -t $timeout -p $port -s ${cl_proto} $extra_args $connect_addr < "$cin" > "$cout" &
+	local cpid=$!
+
+	wait $cpid
+	local retc=$?
+	wait $spid
+	local rets=$?
+
+	local stop
+	stop=$(date +%s%3N)
+
+	if $capture; then
+		sleep 1
+		kill ${cappid_listener}
+		kill ${cappid_connector}
+	fi
+
+	local duration
+	duration=$((stop-start))
+	duration=$(printf "(duration %05sms)" $duration)
+	if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
+		echo "$duration [ FAIL ] client exit code $retc, server $rets" 1>&2
+		echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
+		ip netns exec ${listener_ns} ss -nita 1>&2 -o "sport = :$port"
+		echo -e "\nnetns ${connector_ns} socket stat for ${port}:" 1>&2
+		ip netns exec ${connector_ns} ss -nita 1>&2 -o "dport = :$port"
+
+		cat "$capout"
+		return 1
+	fi
+
+	check_transfer $sin $cout "file received by client"
+	retc=$?
+	check_transfer $cin $sout "file received by server"
+	rets=$?
+
+	local stat_synrx_now_l=$(ip netns exec ${listener_ns} nstat -z -a MPTcpExtMPCapableSYNRX  | while read a count c rest ;do  echo $count;done)
+	local stat_ackrx_now_l=$(ip netns exec ${listener_ns} nstat -z -a MPTcpExtMPCapableACKRX  | while read a count c rest ;do  echo $count;done)
+
+	local stat_cookietx_now=$(ip netns exec ${listener_ns} nstat -z -a TcpExtSyncookiesSent | while read a count c rest ;do  echo $count;done)
+	local stat_cookierx_now=$(ip netns exec ${listener_ns} nstat -z -a TcpExtSyncookiesRecv | while read a count c rest ;do  echo $count;done)
+
+	expect_synrx=$((stat_synrx_last_l))
+	expect_ackrx=$((stat_ackrx_last_l))
+
+	cookies=$(ip netns exec ${listener_ns} sysctl net.ipv4.tcp_syncookies)
+	cookies=${cookies##*=}
+
+	if [ ${cl_proto} = "MPTCP" ] && [ ${srv_proto} = "MPTCP" ]; then
+		expect_synrx=$((stat_synrx_last_l+1))
+		expect_ackrx=$((stat_ackrx_last_l+1))
+	fi
+	if [ $cookies -eq 2 ];then
+		if [ $stat_cookietx_last -ge $stat_cookietx_now ] ;then
+			echo "${listener_ns} CookieSent: ${cl_proto} -> ${srv_proto}: did not advance"
+		fi
+		if [ $stat_cookierx_last -ge $stat_cookierx_now ] ;then
+			echo "${listener_ns} CookieRecv: ${cl_proto} -> ${srv_proto}: did not advance"
+		fi
+	else
+		if [ $stat_cookietx_last -ne $stat_cookietx_now ] ;then
+			echo "${listener_ns} CookieSent: ${cl_proto} -> ${srv_proto}: changed"
+		fi
+		if [ $stat_cookierx_last -ne $stat_cookierx_now ] ;then
+			echo "${listener_ns} CookieRecv: ${cl_proto} -> ${srv_proto}: changed"
+		fi
+	fi
+
+	if [ $expect_synrx -ne $stat_synrx_now_l ] ;then
+		echo "${listener_ns} SYNRX: ${cl_proto} -> ${srv_proto}: expect ${expect_synrx}, got ${stat_synrx_now_l}"
+	fi
+	if [ $expect_ackrx -ne $stat_ackrx_now_l ] ;then
+		echo "${listener_ns} ACKRX: ${cl_proto} -> ${srv_proto}: expect ${expect_ackrx}, got ${stat_ackrx_now_l} "
+	fi
+
+	if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
+		echo "$duration [ OK ]"
+		cat "$capout"
+		return 0
+	fi
+
+	cat "$capout"
+	return 1
+}
+
+make_file()
+{
+	local name=$1
+	local who=$2
+	local SIZE=$filesize
+	local ksize
+	local rem
+
+	if [ $SIZE -eq 0 ]; then
+		local MAXSIZE=$((1024 * 1024 * 8))
+		local MINSIZE=$((1024 * 256))
+
+		SIZE=$(((RANDOM * RANDOM + MINSIZE) % MAXSIZE))
+	fi
+
+	ksize=$((SIZE / 1024))
+	rem=$((SIZE - (ksize * 1024)))
+
+	dd if=/dev/urandom of="$name" bs=1024 count=$ksize 2> /dev/null
+	dd if=/dev/urandom conv=notrunc of="$name" bs=1 count=$rem 2> /dev/null
+	echo -e "\nMPTCP_TEST_FILE_END_MARKER" >> "$name"
+
+	echo "Created $name (size $(du -b "$name")) containing data sent by $who"
+}
+
+run_tests_lo()
+{
+	local listener_ns="$1"
+	local connector_ns="$2"
+	local connect_addr="$3"
+	local loopback="$4"
+	local lret=0
+
+	# skip if test programs are running inside same netns for subsequent runs.
+	if [ $loopback -eq 0 ] && [ ${listener_ns} = ${connector_ns} ]; then
+		return 0
+	fi
+
+	# skip if we don't want v6
+	if ! $ipv6 && is_v6 "${connect_addr}"; then
+		return 0
+	fi
+
+	local local_addr
+	if is_v6 "${connect_addr}"; then
+		local_addr="::"
+	else
+		local_addr="0.0.0.0"
+	fi
+
+	do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} ${local_addr}
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		return 1
+	fi
+
+	if [ $do_tcp -eq 0 ]; then
+		# don't bother testing fallback tcp except for loopback case.
+		if [ ${listener_ns} != ${connector_ns} ]; then
+			return 0
+		fi
+	fi
+
+	do_transfer ${listener_ns} ${connector_ns} MPTCP TCP ${connect_addr} ${local_addr}
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		return 1
+	fi
+
+	do_transfer ${listener_ns} ${connector_ns} TCP MPTCP ${connect_addr} ${local_addr}
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		return 1
+	fi
+
+	if [ $do_tcp -gt 1 ] ;then
+		do_transfer ${listener_ns} ${connector_ns} TCP TCP ${connect_addr} ${local_addr}
+		lret=$?
+		if [ $lret -ne 0 ]; then
+			ret=$lret
+			return 1
+		fi
+	fi
+
+	return 0
+}
+
+run_tests()
+{
+	run_tests_lo $1 $2 $3 0
+}
+
+make_file "$cin" "client"
+make_file "$sin" "server"
+
+check_mptcp_disabled
+
+check_mptcp_ulp_setsockopt
+
+echo "INFO: validating network environment with pings"
+for sender in "$ns1" "$ns2" "$ns3" "$ns4";do
+	do_ping "$ns1" $sender 10.0.1.1
+	do_ping "$ns1" $sender dead:beef:1::1
+
+	do_ping "$ns2" $sender 10.0.1.2
+	do_ping "$ns2" $sender dead:beef:1::2
+	do_ping "$ns2" $sender 10.0.2.1
+	do_ping "$ns2" $sender dead:beef:2::1
+
+	do_ping "$ns3" $sender 10.0.2.2
+	do_ping "$ns3" $sender dead:beef:2::2
+	do_ping "$ns3" $sender 10.0.3.2
+	do_ping "$ns3" $sender dead:beef:3::2
+
+	do_ping "$ns4" $sender 10.0.3.1
+	do_ping "$ns4" $sender dead:beef:3::1
+done
+
+[ -n "$tc_loss" ] && tc -net "$ns2" qdisc add dev ns2eth3 root netem loss random $tc_loss delay ${tc_delay}ms
+echo -n "INFO: Using loss of $tc_loss "
+test "$tc_delay" -gt 0 && echo -n "delay $tc_delay ms "
+
+reorder_delay=$(($tc_delay / 4))
+
+if [ -z "${tc_reorder}" ]; then
+	reorder1=$((RANDOM%10))
+	reorder1=$((100 - reorder1))
+	reorder2=$((RANDOM%100))
+
+	if [ $reorder_delay -gt 0 ] && [ $reorder1 -lt 100 ] && [ $reorder2 -gt 0 ]; then
+		tc_reorder="reorder ${reorder1}% ${reorder2}%"
+		echo -n "$tc_reorder with delay ${reorder_delay}ms "
+	fi
+elif [ "$tc_reorder" = "0" ];then
+	tc_reorder=""
+elif [ "$reorder_delay" -gt 0 ];then
+	# reordering requires some delay
+	tc_reorder="reorder $tc_reorder"
+	echo -n "$tc_reorder with delay ${reorder_delay}ms "
+fi
+
+echo "on ns3eth4"
+
+tc -net "$ns3" qdisc add dev ns3eth4 root netem delay ${reorder_delay}ms $tc_reorder
+
+for sender in $ns1 $ns2 $ns3 $ns4;do
+	run_tests_lo "$ns1" "$sender" 10.0.1.1 1
+	if [ $ret -ne 0 ] ;then
+		echo "FAIL: Could not even run loopback test" 1>&2
+		exit $ret
+	fi
+	run_tests_lo "$ns1" $sender dead:beef:1::1 1
+	if [ $ret -ne 0 ] ;then
+		echo "FAIL: Could not even run loopback v6 test" 2>&1
+		exit $ret
+	fi
+
+	# ns1<->ns2 is not subject to reordering/tc delays. Use it to test
+	# mptcp syncookie support.
+	if [ $sender = $ns1 ]; then
+		ip netns exec "$ns2" sysctl -q net.ipv4.tcp_syncookies=2
+	else
+		ip netns exec "$ns2" sysctl -q net.ipv4.tcp_syncookies=1
+	fi
+
+	run_tests "$ns2" $sender 10.0.1.2
+	run_tests "$ns2" $sender dead:beef:1::2
+	run_tests "$ns2" $sender 10.0.2.1
+	run_tests "$ns2" $sender dead:beef:2::1
+
+	run_tests "$ns3" $sender 10.0.2.2
+	run_tests "$ns3" $sender dead:beef:2::2
+	run_tests "$ns3" $sender 10.0.3.2
+	run_tests "$ns3" $sender dead:beef:3::2
+
+	run_tests "$ns4" $sender 10.0.3.1
+	run_tests "$ns4" $sender dead:beef:3::1
+done
+
+time_end=$(date +%s)
+time_run=$((time_end-time_start))
+
+echo "Time: ${time_run} seconds"
+
+exit $ret
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
new file mode 100755
index 000000000..d205828d7
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -0,0 +1,629 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(dirname "${0}")/mptcp_lib.sh"
+
+ret=0
+sin=""
+sout=""
+cin=""
+cout=""
+ksft_skip=4
+timeout=30
+mptcp_connect=""
+capture=0
+
+TEST_COUNT=0
+
+init()
+{
+	capout=$(mktemp)
+
+	rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+
+	ns1="ns1-$rndh"
+	ns2="ns2-$rndh"
+
+	for netns in "$ns1" "$ns2";do
+		ip netns add $netns || exit $ksft_skip
+		ip -net $netns link set lo up
+		ip netns exec $netns sysctl -q net.mptcp.enabled=1
+		ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0
+		ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0
+	done
+
+	#  ns1              ns2
+	# ns1eth1    ns2eth1
+	# ns1eth2    ns2eth2
+	# ns1eth3    ns2eth3
+	# ns1eth4    ns2eth4
+
+	for i in `seq 1 4`; do
+		ip link add ns1eth$i netns "$ns1" type veth peer name ns2eth$i netns "$ns2"
+		ip -net "$ns1" addr add 10.0.$i.1/24 dev ns1eth$i
+		ip -net "$ns1" addr add dead:beef:$i::1/64 dev ns1eth$i nodad
+		ip -net "$ns1" link set ns1eth$i up
+
+		ip -net "$ns2" addr add 10.0.$i.2/24 dev ns2eth$i
+		ip -net "$ns2" addr add dead:beef:$i::2/64 dev ns2eth$i nodad
+		ip -net "$ns2" link set ns2eth$i up
+
+		# let $ns2 reach any $ns1 address from any interface
+		ip -net "$ns2" route add default via 10.0.$i.1 dev ns2eth$i metric 10$i
+	done
+}
+
+cleanup_partial()
+{
+	rm -f "$capout"
+
+	for netns in "$ns1" "$ns2"; do
+		ip netns del $netns
+	done
+}
+
+cleanup()
+{
+	rm -f "$cin" "$cout"
+	rm -f "$sin" "$sout"
+	cleanup_partial
+}
+
+reset()
+{
+	cleanup_partial
+	init
+}
+
+reset_with_cookies()
+{
+	reset
+
+	for netns in "$ns1" "$ns2";do
+		ip netns exec $netns sysctl -q net.ipv4.tcp_syncookies=2
+	done
+}
+
+for arg in "$@"; do
+	if [ "$arg" = "-c" ]; then
+		capture=1
+	fi
+done
+
+mptcp_lib_check_mptcp
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+
+check_transfer()
+{
+	in=$1
+	out=$2
+	what=$3
+
+	cmp "$in" "$out" > /dev/null 2>&1
+	if [ $? -ne 0 ] ;then
+		echo "[ FAIL ] $what does not match (in, out):"
+		print_file_err "$in"
+		print_file_err "$out"
+
+		return 1
+	fi
+
+	return 0
+}
+
+do_ping()
+{
+	listener_ns="$1"
+	connector_ns="$2"
+	connect_addr="$3"
+
+	ip netns exec ${connector_ns} ping -q -c 1 $connect_addr >/dev/null
+	if [ $? -ne 0 ] ; then
+		echo "$listener_ns -> $connect_addr connectivity [ FAIL ]" 1>&2
+		ret=1
+	fi
+}
+
+# $1: ns ; $2: counter
+get_counter()
+{
+	local ns="${1}"
+	local counter="${2}"
+	local count
+
+	count=$(ip netns exec ${ns} nstat -asz "${counter}" | awk 'NR==1 {next} {print $2}')
+	if [ -z "${count}" ]; then
+		mptcp_lib_fail_if_expected_feature "${counter} counter"
+		return 1
+	fi
+
+	echo "${count}"
+}
+
+do_transfer()
+{
+	listener_ns="$1"
+	connector_ns="$2"
+	cl_proto="$3"
+	srv_proto="$4"
+	connect_addr="$5"
+	rm_nr_ns1="$6"
+	rm_nr_ns2="$7"
+
+	port=$((10000+$TEST_COUNT))
+	TEST_COUNT=$((TEST_COUNT+1))
+
+	:> "$cout"
+	:> "$sout"
+	:> "$capout"
+
+	if [ $capture -eq 1 ]; then
+		if [ -z $SUDO_USER ] ; then
+			capuser=""
+		else
+			capuser="-Z $SUDO_USER"
+		fi
+
+		capfile=$(printf "mp_join-%02u-%s.pcap" "$TEST_COUNT" "${listener_ns}")
+
+		echo "Capturing traffic for test $TEST_COUNT into $capfile"
+		ip netns exec ${listener_ns} tcpdump -i any -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 &
+		cappid=$!
+
+		sleep 1
+	fi
+
+	if [[ $rm_nr_ns1 -eq 0 && $rm_nr_ns2 -eq 0 ]]; then
+		mptcp_connect="./mptcp_connect -j"
+	else
+		mptcp_connect="./mptcp_connect -r"
+	fi
+
+	ip netns exec ${listener_ns} $mptcp_connect -t $timeout -l -p $port -s ${srv_proto} 0.0.0.0 < "$sin" > "$sout" &
+	spid=$!
+
+	sleep 1
+
+	ip netns exec ${connector_ns} $mptcp_connect -t $timeout -p $port -s ${cl_proto} $connect_addr < "$cin" > "$cout" &
+	cpid=$!
+
+	if [ $rm_nr_ns1 -gt 0 ]; then
+		counter=1
+		sleep 1
+
+		while [ $counter -le $rm_nr_ns1 ]
+		do
+			ip netns exec ${listener_ns} ./pm_nl_ctl del $counter
+			sleep 1
+			let counter+=1
+		done
+	fi
+
+	if [ $rm_nr_ns2 -gt 0 ]; then
+		counter=1
+		sleep 1
+
+		while [ $counter -le $rm_nr_ns2 ]
+		do
+			ip netns exec ${connector_ns} ./pm_nl_ctl del $counter
+			sleep 1
+			let counter+=1
+		done
+	fi
+
+	wait $cpid
+	retc=$?
+	wait $spid
+	rets=$?
+
+	if [ $capture -eq 1 ]; then
+	    sleep 1
+	    kill $cappid
+	fi
+
+	if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
+		echo " client exit code $retc, server $rets" 1>&2
+		echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
+		ip netns exec ${listener_ns} ss -nita 1>&2 -o "sport = :$port"
+		echo -e "\nnetns ${connector_ns} socket stat for ${port}:" 1>&2
+		ip netns exec ${connector_ns} ss -nita 1>&2 -o "dport = :$port"
+
+		cat "$capout"
+		return 1
+	fi
+
+	check_transfer $sin $cout "file received by client"
+	retc=$?
+	check_transfer $cin $sout "file received by server"
+	rets=$?
+
+	if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
+		cat "$capout"
+		return 0
+	fi
+
+	cat "$capout"
+	return 1
+}
+
+make_file()
+{
+	name=$1
+	who=$2
+
+	SIZE=1
+
+	dd if=/dev/urandom of="$name" bs=1024 count=$SIZE 2> /dev/null
+	echo -e "\nMPTCP_TEST_FILE_END_MARKER" >> "$name"
+
+	echo "Created $name (size $SIZE KB) containing data sent by $who"
+}
+
+run_tests()
+{
+	listener_ns="$1"
+	connector_ns="$2"
+	connect_addr="$3"
+	lret=0
+
+	do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} 0 0
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		return
+	fi
+}
+
+run_remove_tests()
+{
+	listener_ns="$1"
+	connector_ns="$2"
+	connect_addr="$3"
+	rm_nr_ns1="$4"
+	rm_nr_ns2="$5"
+	lret=0
+
+	do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} ${rm_nr_ns1} ${rm_nr_ns2}
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		return
+	fi
+}
+
+chk_join_nr()
+{
+	local msg="$1"
+	local syn_nr=$2
+	local syn_ack_nr=$3
+	local ack_nr=$4
+	local count
+	local dump_stats
+
+	printf "%02u %-36s %s" "$TEST_COUNT" "$msg" "syn"
+	count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$syn_nr" ]; then
+		echo "[fail] got $count JOIN[s] syn expected $syn_nr"
+		ret=1
+		dump_stats=1
+	else
+		echo -n "[ ok ]"
+	fi
+
+	echo -n " - synack"
+	count=$(get_counter ${ns2} "MPTcpExtMPJoinSynAckRx")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$syn_ack_nr" ]; then
+		echo "[fail] got $count JOIN[s] synack expected $syn_ack_nr"
+		ret=1
+		dump_stats=1
+	else
+		echo -n "[ ok ]"
+	fi
+
+	echo -n " - ack"
+	count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$ack_nr" ]; then
+		echo "[fail] got $count JOIN[s] ack expected $ack_nr"
+		ret=1
+		dump_stats=1
+	else
+		echo "[ ok ]"
+	fi
+	if [ "${dump_stats}" = 1 ]; then
+		echo Server ns stats
+		ip netns exec $ns1 nstat -as | grep MPTcp
+		echo Client ns stats
+		ip netns exec $ns2 nstat -as | grep MPTcp
+	fi
+}
+
+chk_add_nr()
+{
+	local add_nr=$1
+	local echo_nr=$2
+	local count
+	local dump_stats
+
+	printf "%-39s %s" " " "add"
+	count=$(get_counter ${ns2} "MPTcpExtAddAddr")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$add_nr" ]; then
+		echo "[fail] got $count ADD_ADDR[s] expected $add_nr"
+		ret=1
+		dump_stats=1
+	else
+		echo -n "[ ok ]"
+	fi
+
+	echo -n " - echo  "
+	count=$(get_counter ${ns1} "MPTcpExtEchoAdd")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$echo_nr" ]; then
+		echo "[fail] got $count ADD_ADDR echo[s] expected $echo_nr"
+		ret=1
+		dump_stats=1
+	else
+		echo "[ ok ]"
+	fi
+
+	if [ "${dump_stats}" = 1 ]; then
+		echo Server ns stats
+		ip netns exec $ns1 nstat -as | grep MPTcp
+		echo Client ns stats
+		ip netns exec $ns2 nstat -as | grep MPTcp
+	fi
+}
+
+chk_rm_nr()
+{
+	local rm_addr_nr=$1
+	local rm_subflow_nr=$2
+	local count
+	local dump_stats
+
+	printf "%-39s %s" " " "rm "
+	count=$(get_counter ${ns1} "MPTcpExtRmAddr")
+	if [ -z "$count" ]; then
+		echo -n "[skip]"
+	elif [ "$count" != "$rm_addr_nr" ]; then
+		echo "[fail] got $count RM_ADDR[s] expected $rm_addr_nr"
+		ret=1
+		dump_stats=1
+	else
+		echo -n "[ ok ]"
+	fi
+
+	echo -n " - sf    "
+	count=$(get_counter ${ns2} "MPTcpExtRmSubflow")
+	if [ -z "$count" ]; then
+		echo "[skip]"
+	elif [ "$count" != "$rm_subflow_nr" ]; then
+		echo "[fail] got $count RM_SUBFLOW[s] expected $rm_subflow_nr"
+		ret=1
+		dump_stats=1
+	else
+		echo "[ ok ]"
+	fi
+
+	if [ "${dump_stats}" = 1 ]; then
+		echo Server ns stats
+		ip netns exec $ns1 nstat -as | grep MPTcp
+		echo Client ns stats
+		ip netns exec $ns2 nstat -as | grep MPTcp
+	fi
+}
+
+sin=$(mktemp)
+sout=$(mktemp)
+cin=$(mktemp)
+cout=$(mktemp)
+init
+make_file "$cin" "client"
+make_file "$sin" "server"
+trap cleanup EXIT
+
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "no JOIN" "0" "0" "0"
+
+# subflow limted by client
+reset
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "single subflow, limited by client" 0 0 0
+
+# subflow limted by server
+reset
+ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "single subflow, limited by server" 1 1 0
+
+# subflow
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "single subflow" 1 1 1
+
+# multiple subflows
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple subflows" 2 2 2
+
+# multiple subflows limited by serverf
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple subflows, limited by server" 2 2 1
+
+# add_address, unused
+reset
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "unused signal address" 0 0 0
+chk_add_nr 1 1
+
+# accept and use add_addr
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "signal address" 1 1 1
+chk_add_nr 1 1
+
+# accept and use add_addr with an additional subflow
+# note: signal address in server ns and local addresses in client ns must
+# belong to different subnets or one of the listed local address could be
+# used for 'add_addr' subflow
+reset
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "subflow and signal" 2 2 2
+chk_add_nr 1 1
+
+# accept and use add_addr with additional subflows
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple subflows and signal" 3 3 3
+chk_add_nr 1 1
+
+# single subflow, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_remove_tests $ns1 $ns2 10.0.1.1 0 1
+chk_join_nr "remove single subflow" 1 1 1
+chk_rm_nr 1 1
+
+# multiple subflows, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_remove_tests $ns1 $ns2 10.0.1.1 0 2
+chk_join_nr "remove multiple subflows" 2 2 2
+chk_rm_nr 2 2
+
+# single address, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+run_remove_tests $ns1 $ns2 10.0.1.1 1 0
+chk_join_nr "remove single address" 1 1 1
+chk_add_nr 1 1
+chk_rm_nr 0 0
+
+# subflow and signal, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_remove_tests $ns1 $ns2 10.0.1.1 1 1
+chk_join_nr "remove subflow and signal" 2 2 2
+chk_add_nr 1 1
+chk_rm_nr 1 1
+
+# subflows and signal, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+run_remove_tests $ns1 $ns2 10.0.1.1 1 2
+chk_join_nr "remove subflows and signal" 3 3 3
+chk_add_nr 1 1
+chk_rm_nr 2 2
+
+# single subflow, syncookies
+reset_with_cookies
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "single subflow with syn cookies" 1 1 1
+
+# multiple subflows with syn cookies
+reset_with_cookies
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple subflows with syn cookies" 2 2 2
+
+# multiple subflows limited by server
+reset_with_cookies
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "subflows limited by server w cookies" 2 2 1
+
+# test signal address with cookies
+reset_with_cookies
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "signal address with syn cookies" 1 1 1
+chk_add_nr 1 1
+
+# test cookie with subflow and signal
+reset_with_cookies
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "subflow and signal w cookies" 2 2 2
+chk_add_nr 1 1
+
+# accept and use add_addr with additional subflows
+reset_with_cookies
+ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "subflows and signal w. cookies" 3 3 3
+chk_add_nr 1 1
+
+exit $ret
diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
new file mode 100644
index 000000000..f32045b23
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh
@@ -0,0 +1,104 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+readonly KSFT_FAIL=1
+readonly KSFT_SKIP=4
+
+# SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var can be set when validating all
+# features using the last version of the kernel and the selftests to make sure
+# a test is not being skipped by mistake.
+mptcp_lib_expect_all_features() {
+	[ "${SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES:-}" = "1" ]
+}
+
+# $1: msg
+mptcp_lib_fail_if_expected_feature() {
+	if mptcp_lib_expect_all_features; then
+		echo "ERROR: missing feature: ${*}"
+		exit ${KSFT_FAIL}
+	fi
+
+	return 1
+}
+
+# $1: file
+mptcp_lib_has_file() {
+	local f="${1}"
+
+	if [ -f "${f}" ]; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "${f} file not found"
+}
+
+mptcp_lib_check_mptcp() {
+	if ! mptcp_lib_has_file "/proc/sys/net/mptcp/enabled"; then
+		echo "SKIP: MPTCP support is not available"
+		exit ${KSFT_SKIP}
+	fi
+}
+
+mptcp_lib_check_kallsyms() {
+	if ! mptcp_lib_has_file "/proc/kallsyms"; then
+		echo "SKIP: CONFIG_KALLSYMS is missing"
+		exit ${KSFT_SKIP}
+	fi
+}
+
+# Internal: use mptcp_lib_kallsyms_has() instead
+__mptcp_lib_kallsyms_has() {
+	local sym="${1}"
+
+	mptcp_lib_check_kallsyms
+
+	grep -q " ${sym}" /proc/kallsyms
+}
+
+# $1: part of a symbol to look at, add '$' at the end for full name
+mptcp_lib_kallsyms_has() {
+	local sym="${1}"
+
+	if __mptcp_lib_kallsyms_has "${sym}"; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "${sym} symbol not found"
+}
+
+# $1: part of a symbol to look at, add '$' at the end for full name
+mptcp_lib_kallsyms_doesnt_have() {
+	local sym="${1}"
+
+	if ! __mptcp_lib_kallsyms_has "${sym}"; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "${sym} symbol has been found"
+}
+
+# !!!AVOID USING THIS!!!
+# Features might not land in the expected version and features can be backported
+#
+# $1: kernel version, e.g. 6.3
+mptcp_lib_kversion_ge() {
+	local exp_maj="${1%.*}"
+	local exp_min="${1#*.}"
+	local v maj min
+
+	# If the kernel has backported features, set this env var to 1:
+	if [ "${SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK:-}" = "1" ]; then
+		return 0
+	fi
+
+	v=$(uname -r | cut -d'.' -f1,2)
+	maj=${v%.*}
+	min=${v#*.}
+
+	if   [ "${maj}" -gt "${exp_maj}" ] ||
+	   { [ "${maj}" -eq "${exp_maj}" ] && [ "${min}" -ge "${exp_min}" ]; }; then
+		return 0
+	fi
+
+	mptcp_lib_fail_if_expected_feature "kernel version ${1} lower than ${v}"
+}
diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh
new file mode 100755
index 000000000..fff6f74eb
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh
@@ -0,0 +1,136 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(dirname "${0}")/mptcp_lib.sh"
+
+ksft_skip=4
+ret=0
+
+usage() {
+	echo "Usage: $0 [ -h ]"
+}
+
+
+while getopts "$optstring" option;do
+	case "$option" in
+	"h")
+		usage $0
+		exit 0
+		;;
+	"?")
+		usage $0
+		exit 1
+		;;
+	esac
+done
+
+sec=$(date +%s)
+rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+ns1="ns1-$rndh"
+err=$(mktemp)
+ret=0
+
+cleanup()
+{
+	rm -f $err
+	ip netns del $ns1
+}
+
+mptcp_lib_check_mptcp
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+ip netns add $ns1 || exit $ksft_skip
+ip -net $ns1 link set lo up
+ip netns exec $ns1 sysctl -q net.mptcp.enabled=1
+
+check()
+{
+	local cmd="$1"
+	local expected="$2"
+	local msg="$3"
+	local out=`$cmd 2>$err`
+	local cmd_ret=$?
+
+	printf "%-50s %s" "$msg"
+	if [ $cmd_ret -ne 0 ]; then
+		echo "[FAIL] command execution '$cmd' stderr "
+		cat $err
+		ret=1
+	elif [ "$out" = "$expected" ]; then
+		echo "[ OK ]"
+	else
+		echo -n "[FAIL] "
+		echo "expected '$expected' got '$out'"
+		ret=1
+	fi
+}
+
+check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "defaults addr list"
+
+default_limits="$(ip netns exec $ns1 ./pm_nl_ctl limits)"
+if mptcp_lib_expect_all_features; then
+	check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0
+subflows 0" "defaults limits"
+fi
+
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.2 flags subflow dev lo
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.3 flags signal,backup
+check "ip netns exec $ns1 ./pm_nl_ctl get 1" "id 1 flags  10.0.1.1" "simple add/get addr"
+
+check "ip netns exec $ns1 ./pm_nl_ctl dump" \
+"id 1 flags  10.0.1.1
+id 2 flags subflow dev lo 10.0.1.2
+id 3 flags signal,backup 10.0.1.3" "dump addrs"
+
+ip netns exec $ns1 ./pm_nl_ctl del 2
+check "ip netns exec $ns1 ./pm_nl_ctl get 2" "" "simple del addr"
+check "ip netns exec $ns1 ./pm_nl_ctl dump" \
+"id 1 flags  10.0.1.1
+id 3 flags signal,backup 10.0.1.3" "dump addrs after del"
+
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.3
+check "ip netns exec $ns1 ./pm_nl_ctl get 4" "" "duplicate addr"
+
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.4 id 10 flags signal
+check "ip netns exec $ns1 ./pm_nl_ctl get 4" "id 4 flags signal 10.0.1.4" "id addr increment"
+
+for i in `seq 5 9`; do
+	ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.$i flags signal >/dev/null 2>&1
+done
+check "ip netns exec $ns1 ./pm_nl_ctl get 9" "id 9 flags signal 10.0.1.9" "hard addr limit"
+check "ip netns exec $ns1 ./pm_nl_ctl get 10" "" "above hard addr limit"
+
+for i in `seq 9 256`; do
+	ip netns exec $ns1 ./pm_nl_ctl del $i
+	ip netns exec $ns1 ./pm_nl_ctl add 10.0.0.9
+done
+check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags  10.0.1.1
+id 3 flags signal,backup 10.0.1.3
+id 4 flags signal 10.0.1.4
+id 5 flags signal 10.0.1.5
+id 6 flags signal 10.0.1.6
+id 7 flags signal 10.0.1.7
+id 8 flags signal 10.0.1.8" "id limit"
+
+ip netns exec $ns1 ./pm_nl_ctl flush
+check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "flush addrs"
+
+ip netns exec $ns1 ./pm_nl_ctl limits 9 1
+check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "rcv addrs above hard limit"
+
+ip netns exec $ns1 ./pm_nl_ctl limits 1 9
+check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "subflows above hard limit"
+
+ip netns exec $ns1 ./pm_nl_ctl limits 8 8
+check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 8
+subflows 8" "set limits"
+
+exit $ret
diff --git a/tools/testing/selftests/net/mptcp/pm_nl_ctl.c b/tools/testing/selftests/net/mptcp/pm_nl_ctl.c
new file mode 100644
index 000000000..b24a2f17d
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/pm_nl_ctl.c
@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <errno.h>
+#include <error.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/socket.h>
+#include <sys/types.h>
+
+#include <arpa/inet.h>
+#include <net/if.h>
+
+#include <linux/rtnetlink.h>
+#include <linux/genetlink.h>
+
+#include "linux/mptcp.h"
+
+#ifndef MPTCP_PM_NAME
+#define MPTCP_PM_NAME		"mptcp_pm"
+#endif
+
+static void syntax(char *argv[])
+{
+	fprintf(stderr, "%s add|get|del|flush|dump|accept [<args>]\n", argv[0]);
+	fprintf(stderr, "\tadd [flags signal|subflow|backup] [id <nr>] [dev <name>] <ip>\n");
+	fprintf(stderr, "\tdel <id>\n");
+	fprintf(stderr, "\tget <id>\n");
+	fprintf(stderr, "\tflush\n");
+	fprintf(stderr, "\tdump\n");
+	fprintf(stderr, "\tlimits [<rcv addr max> <subflow max>]\n");
+	exit(0);
+}
+
+static int init_genl_req(char *data, int family, int cmd, int version)
+{
+	struct nlmsghdr *nh = (void *)data;
+	struct genlmsghdr *gh;
+	int off = 0;
+
+	nh->nlmsg_type = family;
+	nh->nlmsg_flags = NLM_F_REQUEST;
+	nh->nlmsg_len = NLMSG_LENGTH(GENL_HDRLEN);
+	off += NLMSG_ALIGN(sizeof(*nh));
+
+	gh = (void *)(data + off);
+	gh->cmd = cmd;
+	gh->version = version;
+	off += NLMSG_ALIGN(sizeof(*gh));
+	return off;
+}
+
+static void nl_error(struct nlmsghdr *nh)
+{
+	struct nlmsgerr *err = (struct nlmsgerr *)NLMSG_DATA(nh);
+	int len = nh->nlmsg_len - sizeof(*nh);
+	uint32_t off;
+
+	if (len < sizeof(struct nlmsgerr))
+		error(1, 0, "netlink error message truncated %d min %ld", len,
+		      sizeof(struct nlmsgerr));
+
+	if (!err->error) {
+		/* check messages from kernel */
+		struct rtattr *attrs = (struct rtattr *)NLMSG_DATA(nh);
+
+		while (RTA_OK(attrs, len)) {
+			if (attrs->rta_type == NLMSGERR_ATTR_MSG)
+				fprintf(stderr, "netlink ext ack msg: %s\n",
+					(char *)RTA_DATA(attrs));
+			if (attrs->rta_type == NLMSGERR_ATTR_OFFS) {
+				memcpy(&off, RTA_DATA(attrs), 4);
+				fprintf(stderr, "netlink err off %d\n",
+					(int)off);
+			}
+			attrs = RTA_NEXT(attrs, len);
+		}
+	} else {
+		fprintf(stderr, "netlink error %d", err->error);
+	}
+}
+
+/* do a netlink command and, if max > 0, fetch the reply  */
+static int do_nl_req(int fd, struct nlmsghdr *nh, int len, int max)
+{
+	struct sockaddr_nl nladdr = { .nl_family = AF_NETLINK };
+	socklen_t addr_len;
+	void *data = nh;
+	int rem, ret;
+	int err = 0;
+
+	nh->nlmsg_len = len;
+	ret = sendto(fd, data, len, 0, (void *)&nladdr, sizeof(nladdr));
+	if (ret != len)
+		error(1, errno, "send netlink: %uB != %uB\n", ret, len);
+	if (max == 0)
+		return 0;
+
+	addr_len = sizeof(nladdr);
+	rem = ret = recvfrom(fd, data, max, 0, (void *)&nladdr, &addr_len);
+	if (ret < 0)
+		error(1, errno, "recv netlink: %uB\n", ret);
+
+	/* Beware: the NLMSG_NEXT macro updates the 'rem' argument */
+	for (; NLMSG_OK(nh, rem); nh = NLMSG_NEXT(nh, rem)) {
+		if (nh->nlmsg_type == NLMSG_ERROR) {
+			nl_error(nh);
+			err = 1;
+		}
+	}
+	if (err)
+		error(1, 0, "bailing out due to netlink error[s]");
+	return ret;
+}
+
+static int genl_parse_getfamily(struct nlmsghdr *nlh)
+{
+	struct genlmsghdr *ghdr = NLMSG_DATA(nlh);
+	int len = nlh->nlmsg_len;
+	struct rtattr *attrs;
+
+	if (nlh->nlmsg_type != GENL_ID_CTRL)
+		error(1, errno, "Not a controller message, len=%d type=0x%x\n",
+		      nlh->nlmsg_len, nlh->nlmsg_type);
+
+	len -= NLMSG_LENGTH(GENL_HDRLEN);
+
+	if (len < 0)
+		error(1, errno, "wrong controller message len %d\n", len);
+
+	if (ghdr->cmd != CTRL_CMD_NEWFAMILY)
+		error(1, errno, "Unknown controller command %d\n", ghdr->cmd);
+
+	attrs = (struct rtattr *) ((char *) ghdr + GENL_HDRLEN);
+	while (RTA_OK(attrs, len)) {
+		if (attrs->rta_type == CTRL_ATTR_FAMILY_ID)
+			return *(__u16 *)RTA_DATA(attrs);
+		attrs = RTA_NEXT(attrs, len);
+	}
+
+	error(1, errno, "can't find CTRL_ATTR_FAMILY_ID attr");
+	return -1;
+}
+
+static int resolve_mptcp_pm_netlink(int fd)
+{
+	char data[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+		  NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+		  1024];
+	struct nlmsghdr *nh;
+	struct rtattr *rta;
+	int namelen;
+	int off = 0;
+
+	memset(data, 0, sizeof(data));
+	nh = (void *)data;
+	off = init_genl_req(data, GENL_ID_CTRL, CTRL_CMD_GETFAMILY, 0);
+
+	rta = (void *)(data + off);
+	namelen = strlen(MPTCP_PM_NAME) + 1;
+	rta->rta_type = CTRL_ATTR_FAMILY_NAME;
+	rta->rta_len = RTA_LENGTH(namelen);
+	memcpy(RTA_DATA(rta), MPTCP_PM_NAME, namelen);
+	off += NLMSG_ALIGN(rta->rta_len);
+
+	do_nl_req(fd, nh, off, sizeof(data));
+	return genl_parse_getfamily((void *)data);
+}
+
+int add_addr(int fd, int pm_family, int argc, char *argv[])
+{
+	char data[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+		  NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+		  1024];
+	struct rtattr *rta, *nest;
+	struct nlmsghdr *nh;
+	u_int16_t family;
+	u_int32_t flags;
+	int nest_start;
+	u_int8_t id;
+	int off = 0;
+	int arg;
+
+	memset(data, 0, sizeof(data));
+	nh = (void *)data;
+	off = init_genl_req(data, pm_family, MPTCP_PM_CMD_ADD_ADDR,
+			    MPTCP_PM_VER);
+
+	if (argc < 3)
+		syntax(argv);
+
+	nest_start = off;
+	nest = (void *)(data + off);
+	nest->rta_type = NLA_F_NESTED | MPTCP_PM_ATTR_ADDR;
+	nest->rta_len = RTA_LENGTH(0);
+	off += NLMSG_ALIGN(nest->rta_len);
+
+	/* addr data */
+	rta = (void *)(data + off);
+	if (inet_pton(AF_INET, argv[2], RTA_DATA(rta))) {
+		family = AF_INET;
+		rta->rta_type = MPTCP_PM_ADDR_ATTR_ADDR4;
+		rta->rta_len = RTA_LENGTH(4);
+	} else if (inet_pton(AF_INET6, argv[2], RTA_DATA(rta))) {
+		family = AF_INET6;
+		rta->rta_type = MPTCP_PM_ADDR_ATTR_ADDR6;
+		rta->rta_len = RTA_LENGTH(16);
+	} else
+		error(1, errno, "can't parse ip %s", argv[2]);
+	off += NLMSG_ALIGN(rta->rta_len);
+
+	/* family */
+	rta = (void *)(data + off);
+	rta->rta_type = MPTCP_PM_ADDR_ATTR_FAMILY;
+	rta->rta_len = RTA_LENGTH(2);
+	memcpy(RTA_DATA(rta), &family, 2);
+	off += NLMSG_ALIGN(rta->rta_len);
+
+	for (arg = 3; arg < argc; arg++) {
+		if (!strcmp(argv[arg], "flags")) {
+			char *tok, *str;
+
+			/* flags */
+			flags = 0;
+			if (++arg >= argc)
+				error(1, 0, " missing flags value");
+
+			/* do not support flag list yet */
+			for (str = argv[arg]; (tok = strtok(str, ","));
+			     str = NULL) {
+				if (!strcmp(tok, "subflow"))
+					flags |= MPTCP_PM_ADDR_FLAG_SUBFLOW;
+				else if (!strcmp(tok, "signal"))
+					flags |= MPTCP_PM_ADDR_FLAG_SIGNAL;
+				else if (!strcmp(tok, "backup"))
+					flags |= MPTCP_PM_ADDR_FLAG_BACKUP;
+				else
+					error(1, errno,
+					      "unknown flag %s", argv[arg]);
+			}
+
+			rta = (void *)(data + off);
+			rta->rta_type = MPTCP_PM_ADDR_ATTR_FLAGS;
+			rta->rta_len = RTA_LENGTH(4);
+			memcpy(RTA_DATA(rta), &flags, 4);
+			off += NLMSG_ALIGN(rta->rta_len);
+		} else if (!strcmp(argv[arg], "id")) {
+			if (++arg >= argc)
+				error(1, 0, " missing id value");
+
+			id = atoi(argv[arg]);
+			rta = (void *)(data + off);
+			rta->rta_type = MPTCP_PM_ADDR_ATTR_ID;
+			rta->rta_len = RTA_LENGTH(1);
+			memcpy(RTA_DATA(rta), &id, 1);
+			off += NLMSG_ALIGN(rta->rta_len);
+		} else if (!strcmp(argv[arg], "dev")) {
+			int32_t ifindex;
+
+			if (++arg >= argc)
+				error(1, 0, " missing dev name");
+
+			ifindex = if_nametoindex(argv[arg]);
+			if (!ifindex)
+				error(1, errno, "unknown device %s", argv[arg]);
+
+			rta = (void *)(data + off);
+			rta->rta_type = MPTCP_PM_ADDR_ATTR_IF_IDX;
+			rta->rta_len = RTA_LENGTH(4);
+			memcpy(RTA_DATA(rta), &ifindex, 4);
+			off += NLMSG_ALIGN(rta->rta_len);
+		} else
+			error(1, 0, "unknown keyword %s", argv[arg]);
+	}
+	nest->rta_len = off - nest_start;
+
+	do_nl_req(fd, nh, off, 0);
+	return 0;
+}
+
+int del_addr(int fd, int pm_family, int argc, char *argv[])
+{
+	char data[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+		  NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+		  1024];
+	struct rtattr *rta, *nest;
+	struct nlmsghdr *nh;
+	int nest_start;
+	u_int8_t id;
+	int off = 0;
+
+	memset(data, 0, sizeof(data));
+	nh = (void *)data;
+	off = init_genl_req(data, pm_family, MPTCP_PM_CMD_DEL_ADDR,
+			    MPTCP_PM_VER);
+
+	/* the only argument is the address id */
+	if (argc != 3)
+		syntax(argv);
+
+	id = atoi(argv[2]);
+
+	nest_start = off;
+	nest = (void *)(data + off);
+	nest->rta_type = NLA_F_NESTED | MPTCP_PM_ATTR_ADDR;
+	nest->rta_len =  RTA_LENGTH(0);
+	off += NLMSG_ALIGN(nest->rta_len);
+
+	/* build a dummy addr with only the ID set */
+	rta = (void *)(data + off);
+	rta->rta_type = MPTCP_PM_ADDR_ATTR_ID;
+	rta->rta_len = RTA_LENGTH(1);
+	memcpy(RTA_DATA(rta), &id, 1);
+	off += NLMSG_ALIGN(rta->rta_len);
+	nest->rta_len = off - nest_start;
+
+	do_nl_req(fd, nh, off, 0);
+	return 0;
+}
+
+static void print_addr(struct rtattr *attrs, int len)
+{
+	uint16_t family = 0;
+	char str[1024];
+	uint32_t flags;
+	uint8_t id;
+
+	while (RTA_OK(attrs, len)) {
+		if (attrs->rta_type == MPTCP_PM_ADDR_ATTR_FAMILY)
+			memcpy(&family, RTA_DATA(attrs), 2);
+		if (attrs->rta_type == MPTCP_PM_ADDR_ATTR_ADDR4) {
+			if (family != AF_INET)
+				error(1, errno, "wrong IP (v4) for family %d",
+				      family);
+			inet_ntop(AF_INET, RTA_DATA(attrs), str, sizeof(str));
+			printf("%s", str);
+		}
+		if (attrs->rta_type == MPTCP_PM_ADDR_ATTR_ADDR6) {
+			if (family != AF_INET6)
+				error(1, errno, "wrong IP (v6) for family %d",
+				      family);
+			inet_ntop(AF_INET6, RTA_DATA(attrs), str, sizeof(str));
+			printf("%s", str);
+		}
+		if (attrs->rta_type == MPTCP_PM_ADDR_ATTR_ID) {
+			memcpy(&id, RTA_DATA(attrs), 1);
+			printf("id %d ", id);
+		}
+		if (attrs->rta_type == MPTCP_PM_ADDR_ATTR_FLAGS) {
+			memcpy(&flags, RTA_DATA(attrs), 4);
+
+			printf("flags ");
+			if (flags & MPTCP_PM_ADDR_FLAG_SIGNAL) {
+				printf("signal");
+				flags &= ~MPTCP_PM_ADDR_FLAG_SIGNAL;
+				if (flags)
+					printf(",");
+			}
+
+			if (flags & MPTCP_PM_ADDR_FLAG_SUBFLOW) {
+				printf("subflow");
+				flags &= ~MPTCP_PM_ADDR_FLAG_SUBFLOW;
+				if (flags)
+					printf(",");
+			}
+
+			if (flags & MPTCP_PM_ADDR_FLAG_BACKUP) {
+				printf("backup");
+				flags &= ~MPTCP_PM_ADDR_FLAG_BACKUP;
+				if (flags)
+					printf(",");
+			}
+
+			/* bump unknown flags, if any */
+			if (flags)
+				printf("0x%x", flags);
+			printf(" ");
+		}
+		if (attrs->rta_type == MPTCP_PM_ADDR_ATTR_IF_IDX) {
+			char name[IF_NAMESIZE], *ret;
+			int32_t ifindex;
+
+			memcpy(&ifindex, RTA_DATA(attrs), 4);
+			ret = if_indextoname(ifindex, name);
+			if (ret)
+				printf("dev %s ", ret);
+			else
+				printf("dev unknown/%d", ifindex);
+		}
+
+		attrs = RTA_NEXT(attrs, len);
+	}
+	printf("\n");
+}
+
+static void print_addrs(struct nlmsghdr *nh, int pm_family, int total_len)
+{
+	struct rtattr *attrs;
+
+	for (; NLMSG_OK(nh, total_len); nh = NLMSG_NEXT(nh, total_len)) {
+		int len = nh->nlmsg_len;
+
+		if (nh->nlmsg_type == NLMSG_DONE)
+			break;
+		if (nh->nlmsg_type == NLMSG_ERROR)
+			nl_error(nh);
+		if (nh->nlmsg_type != pm_family)
+			continue;
+
+		len -= NLMSG_LENGTH(GENL_HDRLEN);
+		attrs = (struct rtattr *) ((char *) NLMSG_DATA(nh) +
+					   GENL_HDRLEN);
+		while (RTA_OK(attrs, len)) {
+			if (attrs->rta_type ==
+			    (MPTCP_PM_ATTR_ADDR | NLA_F_NESTED))
+				print_addr((void *)RTA_DATA(attrs),
+					   attrs->rta_len);
+			attrs = RTA_NEXT(attrs, len);
+		}
+	}
+}
+
+int get_addr(int fd, int pm_family, int argc, char *argv[])
+{
+	char data[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+		  NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+		  1024];
+	struct rtattr *rta, *nest;
+	struct nlmsghdr *nh;
+	int nest_start;
+	u_int8_t id;
+	int off = 0;
+
+	memset(data, 0, sizeof(data));
+	nh = (void *)data;
+	off = init_genl_req(data, pm_family, MPTCP_PM_CMD_GET_ADDR,
+			    MPTCP_PM_VER);
+
+	/* the only argument is the address id */
+	if (argc != 3)
+		syntax(argv);
+
+	id = atoi(argv[2]);
+
+	nest_start = off;
+	nest = (void *)(data + off);
+	nest->rta_type = NLA_F_NESTED | MPTCP_PM_ATTR_ADDR;
+	nest->rta_len =  RTA_LENGTH(0);
+	off += NLMSG_ALIGN(nest->rta_len);
+
+	/* build a dummy addr with only the ID set */
+	rta = (void *)(data + off);
+	rta->rta_type = MPTCP_PM_ADDR_ATTR_ID;
+	rta->rta_len = RTA_LENGTH(1);
+	memcpy(RTA_DATA(rta), &id, 1);
+	off += NLMSG_ALIGN(rta->rta_len);
+	nest->rta_len = off - nest_start;
+
+	print_addrs(nh, pm_family, do_nl_req(fd, nh, off, sizeof(data)));
+	return 0;
+}
+
+int dump_addrs(int fd, int pm_family, int argc, char *argv[])
+{
+	char data[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+		  NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+		  1024];
+	pid_t pid = getpid();
+	struct nlmsghdr *nh;
+	int off = 0;
+
+	memset(data, 0, sizeof(data));
+	nh = (void *)data;
+	off = init_genl_req(data, pm_family, MPTCP_PM_CMD_GET_ADDR,
+			    MPTCP_PM_VER);
+	nh->nlmsg_flags |= NLM_F_DUMP;
+	nh->nlmsg_seq = 1;
+	nh->nlmsg_pid = pid;
+	nh->nlmsg_len = off;
+
+	print_addrs(nh, pm_family, do_nl_req(fd, nh, off, sizeof(data)));
+	return 0;
+}
+
+int flush_addrs(int fd, int pm_family, int argc, char *argv[])
+{
+	char data[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+		  NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+		  1024];
+	struct nlmsghdr *nh;
+	int off = 0;
+
+	memset(data, 0, sizeof(data));
+	nh = (void *)data;
+	off = init_genl_req(data, pm_family, MPTCP_PM_CMD_FLUSH_ADDRS,
+			    MPTCP_PM_VER);
+
+	do_nl_req(fd, nh, off, 0);
+	return 0;
+}
+
+static void print_limits(struct nlmsghdr *nh, int pm_family, int total_len)
+{
+	struct rtattr *attrs;
+	uint32_t max;
+
+	for (; NLMSG_OK(nh, total_len); nh = NLMSG_NEXT(nh, total_len)) {
+		int len = nh->nlmsg_len;
+
+		if (nh->nlmsg_type == NLMSG_DONE)
+			break;
+		if (nh->nlmsg_type == NLMSG_ERROR)
+			nl_error(nh);
+		if (nh->nlmsg_type != pm_family)
+			continue;
+
+		len -= NLMSG_LENGTH(GENL_HDRLEN);
+		attrs = (struct rtattr *) ((char *) NLMSG_DATA(nh) +
+					   GENL_HDRLEN);
+		while (RTA_OK(attrs, len)) {
+			int type = attrs->rta_type;
+
+			if (type != MPTCP_PM_ATTR_RCV_ADD_ADDRS &&
+			    type != MPTCP_PM_ATTR_SUBFLOWS)
+				goto next;
+
+			memcpy(&max, RTA_DATA(attrs), 4);
+			printf("%s %u\n", type == MPTCP_PM_ATTR_SUBFLOWS ?
+					  "subflows" : "accept", max);
+
+next:
+			attrs = RTA_NEXT(attrs, len);
+		}
+	}
+}
+
+int get_set_limits(int fd, int pm_family, int argc, char *argv[])
+{
+	char data[NLMSG_ALIGN(sizeof(struct nlmsghdr)) +
+		  NLMSG_ALIGN(sizeof(struct genlmsghdr)) +
+		  1024];
+	uint32_t rcv_addr = 0, subflows = 0;
+	int cmd, len = sizeof(data);
+	struct nlmsghdr *nh;
+	int off = 0;
+
+	/* limit */
+	if (argc == 4) {
+		rcv_addr = atoi(argv[2]);
+		subflows = atoi(argv[3]);
+		cmd = MPTCP_PM_CMD_SET_LIMITS;
+	} else {
+		cmd = MPTCP_PM_CMD_GET_LIMITS;
+	}
+
+	memset(data, 0, sizeof(data));
+	nh = (void *)data;
+	off = init_genl_req(data, pm_family, cmd, MPTCP_PM_VER);
+
+	/* limit */
+	if (cmd == MPTCP_PM_CMD_SET_LIMITS) {
+		struct rtattr *rta = (void *)(data + off);
+
+		rta->rta_type = MPTCP_PM_ATTR_RCV_ADD_ADDRS;
+		rta->rta_len = RTA_LENGTH(4);
+		memcpy(RTA_DATA(rta), &rcv_addr, 4);
+		off += NLMSG_ALIGN(rta->rta_len);
+
+		rta = (void *)(data + off);
+		rta->rta_type = MPTCP_PM_ATTR_SUBFLOWS;
+		rta->rta_len = RTA_LENGTH(4);
+		memcpy(RTA_DATA(rta), &subflows, 4);
+		off += NLMSG_ALIGN(rta->rta_len);
+
+		/* do not expect a reply */
+		len = 0;
+	}
+
+	len = do_nl_req(fd, nh, off, len);
+	if (cmd == MPTCP_PM_CMD_GET_LIMITS)
+		print_limits(nh, pm_family, len);
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	int fd, pm_family;
+
+	if (argc < 2)
+		syntax(argv);
+
+	fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC);
+	if (fd == -1)
+		error(1, errno, "socket netlink");
+
+	pm_family = resolve_mptcp_pm_netlink(fd);
+
+	if (!strcmp(argv[1], "add"))
+		return add_addr(fd, pm_family, argc, argv);
+	else if (!strcmp(argv[1], "del"))
+		return del_addr(fd, pm_family, argc, argv);
+	else if (!strcmp(argv[1], "flush"))
+		return flush_addrs(fd, pm_family, argc, argv);
+	else if (!strcmp(argv[1], "get"))
+		return get_addr(fd, pm_family, argc, argv);
+	else if (!strcmp(argv[1], "dump"))
+		return dump_addrs(fd, pm_family, argc, argv);
+	else if (!strcmp(argv[1], "limits"))
+		return get_set_limits(fd, pm_family, argc, argv);
+
+	fprintf(stderr, "unknown sub-command: %s", argv[1]);
+	syntax(argv);
+	return 0;
+}
diff --git a/tools/testing/selftests/net/mptcp/settings b/tools/testing/selftests/net/mptcp/settings
new file mode 100644
index 000000000..026384c18
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/settings
@@ -0,0 +1 @@
+timeout=450
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh
new file mode 100755
index 000000000..b51afba24
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/simult_flows.sh
@@ -0,0 +1,297 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(dirname "${0}")/mptcp_lib.sh"
+
+rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+ns1="ns1-$rndh"
+ns2="ns2-$rndh"
+ns3="ns3-$rndh"
+capture=false
+ksft_skip=4
+timeout=30
+test_cnt=1
+ret=0
+bail=0
+
+usage() {
+	echo "Usage: $0 [ -b ] [ -c ] [ -d ]"
+	echo -e "\t-b: bail out after first error, otherwise runs al testcases"
+	echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)"
+	echo -e "\t-d: debug this script"
+}
+
+cleanup()
+{
+	rm -f "$cout" "$sout"
+	rm -f "$large" "$small"
+	rm -f "$capout"
+
+	local netns
+	for netns in "$ns1" "$ns2" "$ns3";do
+		ip netns del $netns
+	done
+}
+
+mptcp_lib_check_mptcp
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+#  "$ns1"              ns2                    ns3
+#     ns1eth1    ns2eth1   ns2eth3      ns3eth1
+#            netem
+#     ns1eth2    ns2eth2
+#            netem
+
+setup()
+{
+	large=$(mktemp)
+	small=$(mktemp)
+	sout=$(mktemp)
+	cout=$(mktemp)
+	capout=$(mktemp)
+	size=$((2048 * 4096))
+	dd if=/dev/zero of=$small bs=4096 count=20 >/dev/null 2>&1
+	dd if=/dev/zero of=$large bs=4096 count=$((size / 4096)) >/dev/null 2>&1
+
+	trap cleanup EXIT
+
+	for i in "$ns1" "$ns2" "$ns3";do
+		ip netns add $i || exit $ksft_skip
+		ip -net $i link set lo up
+	done
+
+	ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2"
+	ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth2 netns "$ns2"
+	ip link add ns2eth3 netns "$ns2" type veth peer name ns3eth1 netns "$ns3"
+
+	ip -net "$ns1" addr add 10.0.1.1/24 dev ns1eth1
+	ip -net "$ns1" addr add dead:beef:1::1/64 dev ns1eth1 nodad
+	ip -net "$ns1" link set ns1eth1 up mtu 1500
+	ip -net "$ns1" route add default via 10.0.1.2
+	ip -net "$ns1" route add default via dead:beef:1::2
+
+	ip -net "$ns1" addr add 10.0.2.1/24 dev ns1eth2
+	ip -net "$ns1" addr add dead:beef:2::1/64 dev ns1eth2 nodad
+	ip -net "$ns1" link set ns1eth2 up mtu 1500
+	ip -net "$ns1" route add default via 10.0.2.2 metric 101
+	ip -net "$ns1" route add default via dead:beef:2::2 metric 101
+
+	ip netns exec "$ns1" ./pm_nl_ctl limits 1 1
+	ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow
+	ip netns exec "$ns1" sysctl -q net.ipv4.conf.all.rp_filter=0
+
+	ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1
+	ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad
+	ip -net "$ns2" link set ns2eth1 up mtu 1500
+
+	ip -net "$ns2" addr add 10.0.2.2/24 dev ns2eth2
+	ip -net "$ns2" addr add dead:beef:2::2/64 dev ns2eth2 nodad
+	ip -net "$ns2" link set ns2eth2 up mtu 1500
+
+	ip -net "$ns2" addr add 10.0.3.2/24 dev ns2eth3
+	ip -net "$ns2" addr add dead:beef:3::2/64 dev ns2eth3 nodad
+	ip -net "$ns2" link set ns2eth3 up mtu 1500
+	ip netns exec "$ns2" sysctl -q net.ipv4.ip_forward=1
+	ip netns exec "$ns2" sysctl -q net.ipv6.conf.all.forwarding=1
+
+	ip -net "$ns3" addr add 10.0.3.3/24 dev ns3eth1
+	ip -net "$ns3" addr add dead:beef:3::3/64 dev ns3eth1 nodad
+	ip -net "$ns3" link set ns3eth1 up mtu 1500
+	ip -net "$ns3" route add default via 10.0.3.2
+	ip -net "$ns3" route add default via dead:beef:3::2
+
+	ip netns exec "$ns3" ./pm_nl_ctl limits 1 1
+}
+
+# $1: ns, $2: port
+wait_local_port_listen()
+{
+	local listener_ns="${1}"
+	local port="${2}"
+
+	local port_hex i
+
+	port_hex="$(printf "%04X" "${port}")"
+	for i in $(seq 10); do
+		ip netns exec "${listener_ns}" cat /proc/net/tcp* | \
+			awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" &&
+			break
+		sleep 0.1
+	done
+}
+
+do_transfer()
+{
+	local cin=$1
+	local sin=$2
+	local max_time=$3
+	local port
+	port=$((10000+$test_cnt))
+	test_cnt=$((test_cnt+1))
+
+	:> "$cout"
+	:> "$sout"
+	:> "$capout"
+
+	local addr_port
+	addr_port=$(printf "%s:%d" ${connect_addr} ${port})
+
+	if $capture; then
+		local capuser
+		if [ -z $SUDO_USER ] ; then
+			capuser=""
+		else
+			capuser="-Z $SUDO_USER"
+		fi
+
+		local capfile="${rndh}-${port}"
+		local capopt="-i any -s 65535 -B 32768 ${capuser}"
+
+		ip netns exec ${ns3}  tcpdump ${capopt} -w "${capfile}-listener.pcap"  >> "${capout}" 2>&1 &
+		local cappid_listener=$!
+
+		ip netns exec ${ns1} tcpdump ${capopt} -w "${capfile}-connector.pcap" >> "${capout}" 2>&1 &
+		local cappid_connector=$!
+
+		sleep 1
+	fi
+
+	ip netns exec ${ns3} ./mptcp_connect -jt $timeout -l -p $port 0.0.0.0 < "$sin" > "$sout" &
+	local spid=$!
+
+	wait_local_port_listen "${ns3}" "${port}"
+
+	local start
+	start=$(date +%s%3N)
+	ip netns exec ${ns1} ./mptcp_connect -jt $timeout -p $port 10.0.3.3 < "$cin" > "$cout" &
+	local cpid=$!
+
+	wait $cpid
+	local retc=$?
+	wait $spid
+	local rets=$?
+
+	local stop
+	stop=$(date +%s%3N)
+
+	if $capture; then
+		sleep 1
+		kill ${cappid_listener}
+		kill ${cappid_connector}
+	fi
+
+	local duration
+	duration=$((stop-start))
+
+	cmp $sin $cout > /dev/null 2>&1
+	local cmps=$?
+	cmp $cin $sout > /dev/null 2>&1
+	local cmpc=$?
+
+	printf "%16s" "$duration max $max_time "
+	if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \
+	   [ $cmpc -eq 0 ] && [ $cmps -eq 0 ] && \
+	   [ $duration -lt $max_time ]; then
+		echo "[ OK ]"
+		cat "$capout"
+		return 0
+	fi
+
+	echo " [ fail ]"
+	echo "client exit code $retc, server $rets" 1>&2
+	echo -e "\nnetns ${ns3} socket stat for $port:" 1>&2
+	ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port"
+	echo -e "\nnetns ${ns1} socket stat for $port:" 1>&2
+	ip netns exec ${ns1} ss -nita 1>&2 -o "dport = :$port"
+	ls -l $sin $cout
+	ls -l $cin $sout
+
+	cat "$capout"
+	return 1
+}
+
+run_test()
+{
+	local rate1=$1
+	local rate2=$2
+	local delay1=$3
+	local delay2=$4
+	local lret
+	local dev
+	shift 4
+	local msg=$*
+
+	[ $delay1 -gt 0 ] && delay1="delay $delay1" || delay1=""
+	[ $delay2 -gt 0 ] && delay2="delay $delay2" || delay2=""
+
+	for dev in ns1eth1 ns1eth2; do
+		tc -n $ns1 qdisc del dev $dev root >/dev/null 2>&1
+	done
+	for dev in ns2eth1 ns2eth2; do
+		tc -n $ns2 qdisc del dev $dev root >/dev/null 2>&1
+	done
+	tc -n $ns1 qdisc add dev ns1eth1 root netem rate ${rate1}mbit $delay1
+	tc -n $ns1 qdisc add dev ns1eth2 root netem rate ${rate2}mbit $delay2
+	tc -n $ns2 qdisc add dev ns2eth1 root netem rate ${rate1}mbit $delay1
+	tc -n $ns2 qdisc add dev ns2eth2 root netem rate ${rate2}mbit $delay2
+
+	# time is measure in ms
+	local time=$((size * 8 * 1000 / (( $rate1 + $rate2) * 1024 *1024) ))
+
+	# mptcp_connect will do some sleeps to allow the mp_join handshake
+	# completion
+	time=$((time + 1350))
+
+	printf "%-50s" "$msg"
+	do_transfer $small $large $((time * 11 / 10))
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		[ $bail -eq 0 ] || exit $ret
+	fi
+
+	printf "%-50s" "$msg - reverse direction"
+	do_transfer $large $small $((time * 11 / 10))
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		[ $bail -eq 0 ] || exit $ret
+	fi
+}
+
+while getopts "bcdh" option;do
+	case "$option" in
+	"h")
+		usage $0
+		exit 0
+		;;
+	"b")
+		bail=1
+		;;
+	"c")
+		capture=true
+		;;
+	"d")
+		set -x
+		;;
+	"?")
+		usage $0
+		exit 1
+		;;
+	esac
+done
+
+setup
+run_test 10 10 0 0 "balanced bwidth"
+run_test 10 10 1 50 "balanced bwidth with unbalanced delay"
+
+# we still need some additional infrastructure to pass the following test-cases
+# run_test 30 10 0 0 "unbalanced bwidth"
+# run_test 30 10 1 50 "unbalanced bwidth with unbalanced delay"
+# run_test 30 10 50 1 "unbalanced bwidth with opposed, unbalanced delay"
+exit $ret
diff --git a/tools/testing/selftests/net/msg_zerocopy.c b/tools/testing/selftests/net/msg_zerocopy.c
new file mode 100644
index 000000000..bdc03a209
--- /dev/null
+++ b/tools/testing/selftests/net/msg_zerocopy.c
@@ -0,0 +1,811 @@
+/* Evaluate MSG_ZEROCOPY
+ *
+ * Send traffic between two processes over one of the supported
+ * protocols and modes:
+ *
+ * PF_INET/PF_INET6
+ * - SOCK_STREAM
+ * - SOCK_DGRAM
+ * - SOCK_DGRAM with UDP_CORK
+ * - SOCK_RAW
+ * - SOCK_RAW with IP_HDRINCL
+ *
+ * PF_PACKET
+ * - SOCK_DGRAM
+ * - SOCK_RAW
+ *
+ * PF_RDS
+ * - SOCK_SEQPACKET
+ *
+ * Start this program on two connected hosts, one in send mode and
+ * the other with option '-r' to put it in receiver mode.
+ *
+ * If zerocopy mode ('-z') is enabled, the sender will verify that
+ * the kernel queues completions on the error queue for all zerocopy
+ * transfers.
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <error.h>
+#include <errno.h>
+#include <limits.h>
+#include <linux/errqueue.h>
+#include <linux/if_packet.h>
+#include <linux/ipv6.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <net/ethernet.h>
+#include <net/if.h>
+#include <netinet/ip.h>
+#include <netinet/ip6.h>
+#include <netinet/tcp.h>
+#include <netinet/udp.h>
+#include <poll.h>
+#include <sched.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <linux/rds.h>
+
+#ifndef SO_EE_ORIGIN_ZEROCOPY
+#define SO_EE_ORIGIN_ZEROCOPY		5
+#endif
+
+#ifndef SO_ZEROCOPY
+#define SO_ZEROCOPY	60
+#endif
+
+#ifndef SO_EE_CODE_ZEROCOPY_COPIED
+#define SO_EE_CODE_ZEROCOPY_COPIED	1
+#endif
+
+#ifndef MSG_ZEROCOPY
+#define MSG_ZEROCOPY	0x4000000
+#endif
+
+static int  cfg_cork;
+static bool cfg_cork_mixed;
+static int  cfg_cpu		= -1;		/* default: pin to last cpu */
+static int  cfg_family		= PF_UNSPEC;
+static int  cfg_ifindex		= 1;
+static int  cfg_payload_len;
+static int  cfg_port		= 8000;
+static bool cfg_rx;
+static int  cfg_runtime_ms	= 4200;
+static int  cfg_verbose;
+static int  cfg_waittime_ms	= 500;
+static bool cfg_zerocopy;
+
+static socklen_t cfg_alen;
+static struct sockaddr_storage cfg_dst_addr;
+static struct sockaddr_storage cfg_src_addr;
+
+static char payload[IP_MAXPACKET];
+static long packets, bytes, completions, expected_completions;
+static int  zerocopied = -1;
+static uint32_t next_completion;
+
+static unsigned long gettimeofday_ms(void)
+{
+	struct timeval tv;
+
+	gettimeofday(&tv, NULL);
+	return (tv.tv_sec * 1000) + (tv.tv_usec / 1000);
+}
+
+static uint16_t get_ip_csum(const uint16_t *start, int num_words)
+{
+	unsigned long sum = 0;
+	int i;
+
+	for (i = 0; i < num_words; i++)
+		sum += start[i];
+
+	while (sum >> 16)
+		sum = (sum & 0xFFFF) + (sum >> 16);
+
+	return ~sum;
+}
+
+static int do_setcpu(int cpu)
+{
+	cpu_set_t mask;
+
+	CPU_ZERO(&mask);
+	CPU_SET(cpu, &mask);
+	if (sched_setaffinity(0, sizeof(mask), &mask))
+		fprintf(stderr, "cpu: unable to pin, may increase variance.\n");
+	else if (cfg_verbose)
+		fprintf(stderr, "cpu: %u\n", cpu);
+
+	return 0;
+}
+
+static void do_setsockopt(int fd, int level, int optname, int val)
+{
+	if (setsockopt(fd, level, optname, &val, sizeof(val)))
+		error(1, errno, "setsockopt %d.%d: %d", level, optname, val);
+}
+
+static int do_poll(int fd, int events)
+{
+	struct pollfd pfd;
+	int ret;
+
+	pfd.events = events;
+	pfd.revents = 0;
+	pfd.fd = fd;
+
+	ret = poll(&pfd, 1, cfg_waittime_ms);
+	if (ret == -1)
+		error(1, errno, "poll");
+
+	return ret && (pfd.revents & events);
+}
+
+static int do_accept(int fd)
+{
+	int fda = fd;
+
+	fd = accept(fda, NULL, NULL);
+	if (fd == -1)
+		error(1, errno, "accept");
+	if (close(fda))
+		error(1, errno, "close listen sock");
+
+	return fd;
+}
+
+static void add_zcopy_cookie(struct msghdr *msg, uint32_t cookie)
+{
+	struct cmsghdr *cm;
+
+	if (!msg->msg_control)
+		error(1, errno, "NULL cookie");
+	cm = (void *)msg->msg_control;
+	cm->cmsg_len = CMSG_LEN(sizeof(cookie));
+	cm->cmsg_level = SOL_RDS;
+	cm->cmsg_type = RDS_CMSG_ZCOPY_COOKIE;
+	memcpy(CMSG_DATA(cm), &cookie, sizeof(cookie));
+}
+
+static bool do_sendmsg(int fd, struct msghdr *msg, bool do_zerocopy, int domain)
+{
+	int ret, len, i, flags;
+	static uint32_t cookie;
+	char ckbuf[CMSG_SPACE(sizeof(cookie))];
+
+	len = 0;
+	for (i = 0; i < msg->msg_iovlen; i++)
+		len += msg->msg_iov[i].iov_len;
+
+	flags = MSG_DONTWAIT;
+	if (do_zerocopy) {
+		flags |= MSG_ZEROCOPY;
+		if (domain == PF_RDS) {
+			memset(&msg->msg_control, 0, sizeof(msg->msg_control));
+			msg->msg_controllen = CMSG_SPACE(sizeof(cookie));
+			msg->msg_control = (struct cmsghdr *)ckbuf;
+			add_zcopy_cookie(msg, ++cookie);
+		}
+	}
+
+	ret = sendmsg(fd, msg, flags);
+	if (ret == -1 && errno == EAGAIN)
+		return false;
+	if (ret == -1)
+		error(1, errno, "send");
+	if (cfg_verbose && ret != len)
+		fprintf(stderr, "send: ret=%u != %u\n", ret, len);
+
+	if (len) {
+		packets++;
+		bytes += ret;
+		if (do_zerocopy && ret)
+			expected_completions++;
+	}
+	if (do_zerocopy && domain == PF_RDS) {
+		msg->msg_control = NULL;
+		msg->msg_controllen = 0;
+	}
+
+	return true;
+}
+
+static void do_sendmsg_corked(int fd, struct msghdr *msg)
+{
+	bool do_zerocopy = cfg_zerocopy;
+	int i, payload_len, extra_len;
+
+	/* split up the packet. for non-multiple, make first buffer longer */
+	payload_len = cfg_payload_len / cfg_cork;
+	extra_len = cfg_payload_len - (cfg_cork * payload_len);
+
+	do_setsockopt(fd, IPPROTO_UDP, UDP_CORK, 1);
+
+	for (i = 0; i < cfg_cork; i++) {
+
+		/* in mixed-frags mode, alternate zerocopy and copy frags
+		 * start with non-zerocopy, to ensure attach later works
+		 */
+		if (cfg_cork_mixed)
+			do_zerocopy = (i & 1);
+
+		msg->msg_iov[0].iov_len = payload_len + extra_len;
+		extra_len = 0;
+
+		do_sendmsg(fd, msg, do_zerocopy,
+			   (cfg_dst_addr.ss_family == AF_INET ?
+			    PF_INET : PF_INET6));
+	}
+
+	do_setsockopt(fd, IPPROTO_UDP, UDP_CORK, 0);
+}
+
+static int setup_iph(struct iphdr *iph, uint16_t payload_len)
+{
+	struct sockaddr_in *daddr = (void *) &cfg_dst_addr;
+	struct sockaddr_in *saddr = (void *) &cfg_src_addr;
+
+	memset(iph, 0, sizeof(*iph));
+
+	iph->version	= 4;
+	iph->tos	= 0;
+	iph->ihl	= 5;
+	iph->ttl	= 2;
+	iph->saddr	= saddr->sin_addr.s_addr;
+	iph->daddr	= daddr->sin_addr.s_addr;
+	iph->protocol	= IPPROTO_EGP;
+	iph->tot_len	= htons(sizeof(*iph) + payload_len);
+	iph->check	= get_ip_csum((void *) iph, iph->ihl << 1);
+
+	return sizeof(*iph);
+}
+
+static int setup_ip6h(struct ipv6hdr *ip6h, uint16_t payload_len)
+{
+	struct sockaddr_in6 *daddr = (void *) &cfg_dst_addr;
+	struct sockaddr_in6 *saddr = (void *) &cfg_src_addr;
+
+	memset(ip6h, 0, sizeof(*ip6h));
+
+	ip6h->version		= 6;
+	ip6h->payload_len	= htons(payload_len);
+	ip6h->nexthdr		= IPPROTO_EGP;
+	ip6h->hop_limit		= 2;
+	ip6h->saddr		= saddr->sin6_addr;
+	ip6h->daddr		= daddr->sin6_addr;
+
+	return sizeof(*ip6h);
+}
+
+
+static void setup_sockaddr(int domain, const char *str_addr,
+			   struct sockaddr_storage *sockaddr)
+{
+	struct sockaddr_in6 *addr6 = (void *) sockaddr;
+	struct sockaddr_in *addr4 = (void *) sockaddr;
+
+	switch (domain) {
+	case PF_INET:
+		memset(addr4, 0, sizeof(*addr4));
+		addr4->sin_family = AF_INET;
+		addr4->sin_port = htons(cfg_port);
+		if (str_addr &&
+		    inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1)
+			error(1, 0, "ipv4 parse error: %s", str_addr);
+		break;
+	case PF_INET6:
+		memset(addr6, 0, sizeof(*addr6));
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_port = htons(cfg_port);
+		if (str_addr &&
+		    inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1)
+			error(1, 0, "ipv6 parse error: %s", str_addr);
+		break;
+	default:
+		error(1, 0, "illegal domain");
+	}
+}
+
+static int do_setup_tx(int domain, int type, int protocol)
+{
+	int fd;
+
+	fd = socket(domain, type, protocol);
+	if (fd == -1)
+		error(1, errno, "socket t");
+
+	do_setsockopt(fd, SOL_SOCKET, SO_SNDBUF, 1 << 21);
+	if (cfg_zerocopy)
+		do_setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY, 1);
+
+	if (domain != PF_PACKET && domain != PF_RDS)
+		if (connect(fd, (void *) &cfg_dst_addr, cfg_alen))
+			error(1, errno, "connect");
+
+	if (domain == PF_RDS) {
+		if (bind(fd, (void *) &cfg_src_addr, cfg_alen))
+			error(1, errno, "bind");
+	}
+
+	return fd;
+}
+
+static uint32_t do_process_zerocopy_cookies(struct rds_zcopy_cookies *ck)
+{
+	int i;
+
+	if (ck->num > RDS_MAX_ZCOOKIES)
+		error(1, 0, "Returned %d cookies, max expected %d\n",
+		      ck->num, RDS_MAX_ZCOOKIES);
+	for (i = 0; i < ck->num; i++)
+		if (cfg_verbose >= 2)
+			fprintf(stderr, "%d\n", ck->cookies[i]);
+	return ck->num;
+}
+
+static bool do_recvmsg_completion(int fd)
+{
+	char cmsgbuf[CMSG_SPACE(sizeof(struct rds_zcopy_cookies))];
+	struct rds_zcopy_cookies *ck;
+	struct cmsghdr *cmsg;
+	struct msghdr msg;
+	bool ret = false;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.msg_control = cmsgbuf;
+	msg.msg_controllen = sizeof(cmsgbuf);
+
+	if (recvmsg(fd, &msg, MSG_DONTWAIT))
+		return ret;
+
+	if (msg.msg_flags & MSG_CTRUNC)
+		error(1, errno, "recvmsg notification: truncated");
+
+	for (cmsg = CMSG_FIRSTHDR(&msg); cmsg; cmsg = CMSG_NXTHDR(&msg, cmsg)) {
+		if (cmsg->cmsg_level == SOL_RDS &&
+		    cmsg->cmsg_type == RDS_CMSG_ZCOPY_COMPLETION) {
+
+			ck = (struct rds_zcopy_cookies *)CMSG_DATA(cmsg);
+			completions += do_process_zerocopy_cookies(ck);
+			ret = true;
+			break;
+		}
+		error(0, 0, "ignoring cmsg at level %d type %d\n",
+			    cmsg->cmsg_level, cmsg->cmsg_type);
+	}
+	return ret;
+}
+
+static bool do_recv_completion(int fd, int domain)
+{
+	struct sock_extended_err *serr;
+	struct msghdr msg = {};
+	struct cmsghdr *cm;
+	uint32_t hi, lo, range;
+	int ret, zerocopy;
+	char control[100];
+
+	if (domain == PF_RDS)
+		return do_recvmsg_completion(fd);
+
+	msg.msg_control = control;
+	msg.msg_controllen = sizeof(control);
+
+	ret = recvmsg(fd, &msg, MSG_ERRQUEUE);
+	if (ret == -1 && errno == EAGAIN)
+		return false;
+	if (ret == -1)
+		error(1, errno, "recvmsg notification");
+	if (msg.msg_flags & MSG_CTRUNC)
+		error(1, errno, "recvmsg notification: truncated");
+
+	cm = CMSG_FIRSTHDR(&msg);
+	if (!cm)
+		error(1, 0, "cmsg: no cmsg");
+	if (!((cm->cmsg_level == SOL_IP && cm->cmsg_type == IP_RECVERR) ||
+	      (cm->cmsg_level == SOL_IPV6 && cm->cmsg_type == IPV6_RECVERR) ||
+	      (cm->cmsg_level == SOL_PACKET && cm->cmsg_type == PACKET_TX_TIMESTAMP)))
+		error(1, 0, "serr: wrong type: %d.%d",
+		      cm->cmsg_level, cm->cmsg_type);
+
+	serr = (void *) CMSG_DATA(cm);
+
+	if (serr->ee_origin != SO_EE_ORIGIN_ZEROCOPY)
+		error(1, 0, "serr: wrong origin: %u", serr->ee_origin);
+	if (serr->ee_errno != 0)
+		error(1, 0, "serr: wrong error code: %u", serr->ee_errno);
+
+	hi = serr->ee_data;
+	lo = serr->ee_info;
+	range = hi - lo + 1;
+
+	/* Detect notification gaps. These should not happen often, if at all.
+	 * Gaps can occur due to drops, reordering and retransmissions.
+	 */
+	if (lo != next_completion)
+		fprintf(stderr, "gap: %u..%u does not append to %u\n",
+			lo, hi, next_completion);
+	next_completion = hi + 1;
+
+	zerocopy = !(serr->ee_code & SO_EE_CODE_ZEROCOPY_COPIED);
+	if (zerocopied == -1)
+		zerocopied = zerocopy;
+	else if (zerocopied != zerocopy) {
+		fprintf(stderr, "serr: inconsistent\n");
+		zerocopied = zerocopy;
+	}
+
+	if (cfg_verbose >= 2)
+		fprintf(stderr, "completed: %u (h=%u l=%u)\n",
+			range, hi, lo);
+
+	completions += range;
+	return true;
+}
+
+/* Read all outstanding messages on the errqueue */
+static void do_recv_completions(int fd, int domain)
+{
+	while (do_recv_completion(fd, domain)) {}
+}
+
+/* Wait for all remaining completions on the errqueue */
+static void do_recv_remaining_completions(int fd, int domain)
+{
+	int64_t tstop = gettimeofday_ms() + cfg_waittime_ms;
+
+	while (completions < expected_completions &&
+	       gettimeofday_ms() < tstop) {
+		if (do_poll(fd, domain == PF_RDS ? POLLIN : POLLERR))
+			do_recv_completions(fd, domain);
+	}
+
+	if (completions < expected_completions)
+		fprintf(stderr, "missing notifications: %lu < %lu\n",
+			completions, expected_completions);
+}
+
+static void do_tx(int domain, int type, int protocol)
+{
+	struct iovec iov[3] = { {0} };
+	struct sockaddr_ll laddr;
+	struct msghdr msg = {0};
+	struct ethhdr eth;
+	union {
+		struct ipv6hdr ip6h;
+		struct iphdr iph;
+	} nh;
+	uint64_t tstop;
+	int fd;
+
+	fd = do_setup_tx(domain, type, protocol);
+
+	if (domain == PF_PACKET) {
+		uint16_t proto = cfg_family == PF_INET ? ETH_P_IP : ETH_P_IPV6;
+
+		/* sock_raw passes ll header as data */
+		if (type == SOCK_RAW) {
+			memset(eth.h_dest, 0x06, ETH_ALEN);
+			memset(eth.h_source, 0x02, ETH_ALEN);
+			eth.h_proto = htons(proto);
+			iov[0].iov_base = &eth;
+			iov[0].iov_len = sizeof(eth);
+			msg.msg_iovlen++;
+		}
+
+		/* both sock_raw and sock_dgram expect name */
+		memset(&laddr, 0, sizeof(laddr));
+		laddr.sll_family	= AF_PACKET;
+		laddr.sll_ifindex	= cfg_ifindex;
+		laddr.sll_protocol	= htons(proto);
+		laddr.sll_halen		= ETH_ALEN;
+
+		memset(laddr.sll_addr, 0x06, ETH_ALEN);
+
+		msg.msg_name		= &laddr;
+		msg.msg_namelen		= sizeof(laddr);
+	}
+
+	/* packet and raw sockets with hdrincl must pass network header */
+	if (domain == PF_PACKET || protocol == IPPROTO_RAW) {
+		if (cfg_family == PF_INET)
+			iov[1].iov_len = setup_iph(&nh.iph, cfg_payload_len);
+		else
+			iov[1].iov_len = setup_ip6h(&nh.ip6h, cfg_payload_len);
+
+		iov[1].iov_base = (void *) &nh;
+		msg.msg_iovlen++;
+	}
+
+	if (domain == PF_RDS) {
+		msg.msg_name = &cfg_dst_addr;
+		msg.msg_namelen =  (cfg_dst_addr.ss_family == AF_INET ?
+				    sizeof(struct sockaddr_in) :
+				    sizeof(struct sockaddr_in6));
+	}
+
+	iov[2].iov_base = payload;
+	iov[2].iov_len = cfg_payload_len;
+	msg.msg_iovlen++;
+	msg.msg_iov = &iov[3 - msg.msg_iovlen];
+
+	tstop = gettimeofday_ms() + cfg_runtime_ms;
+	do {
+		if (cfg_cork)
+			do_sendmsg_corked(fd, &msg);
+		else
+			do_sendmsg(fd, &msg, cfg_zerocopy, domain);
+
+		while (!do_poll(fd, POLLOUT)) {
+			if (cfg_zerocopy)
+				do_recv_completions(fd, domain);
+		}
+
+	} while (gettimeofday_ms() < tstop);
+
+	if (cfg_zerocopy)
+		do_recv_remaining_completions(fd, domain);
+
+	if (close(fd))
+		error(1, errno, "close");
+
+	fprintf(stderr, "tx=%lu (%lu MB) txc=%lu zc=%c\n",
+		packets, bytes >> 20, completions,
+		zerocopied == 1 ? 'y' : 'n');
+}
+
+static int do_setup_rx(int domain, int type, int protocol)
+{
+	int fd;
+
+	/* If tx over PF_PACKET, rx over PF_INET(6)/SOCK_RAW,
+	 * to recv the only copy of the packet, not a clone
+	 */
+	if (domain == PF_PACKET)
+		error(1, 0, "Use PF_INET/SOCK_RAW to read");
+
+	if (type == SOCK_RAW && protocol == IPPROTO_RAW)
+		error(1, 0, "IPPROTO_RAW: not supported on Rx");
+
+	fd = socket(domain, type, protocol);
+	if (fd == -1)
+		error(1, errno, "socket r");
+
+	do_setsockopt(fd, SOL_SOCKET, SO_RCVBUF, 1 << 21);
+	do_setsockopt(fd, SOL_SOCKET, SO_RCVLOWAT, 1 << 16);
+	do_setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, 1);
+
+	if (bind(fd, (void *) &cfg_dst_addr, cfg_alen))
+		error(1, errno, "bind");
+
+	if (type == SOCK_STREAM) {
+		if (listen(fd, 1))
+			error(1, errno, "listen");
+		fd = do_accept(fd);
+	}
+
+	return fd;
+}
+
+/* Flush all outstanding bytes for the tcp receive queue */
+static void do_flush_tcp(int fd)
+{
+	int ret;
+
+	/* MSG_TRUNC flushes up to len bytes */
+	ret = recv(fd, NULL, 1 << 21, MSG_TRUNC | MSG_DONTWAIT);
+	if (ret == -1 && errno == EAGAIN)
+		return;
+	if (ret == -1)
+		error(1, errno, "flush");
+	if (!ret)
+		return;
+
+	packets++;
+	bytes += ret;
+}
+
+/* Flush all outstanding datagrams. Verify first few bytes of each. */
+static void do_flush_datagram(int fd, int type)
+{
+	int ret, off = 0;
+	char buf[64];
+
+	/* MSG_TRUNC will return full datagram length */
+	ret = recv(fd, buf, sizeof(buf), MSG_DONTWAIT | MSG_TRUNC);
+	if (ret == -1 && errno == EAGAIN)
+		return;
+
+	/* raw ipv4 return with header, raw ipv6 without */
+	if (cfg_family == PF_INET && type == SOCK_RAW) {
+		off += sizeof(struct iphdr);
+		ret -= sizeof(struct iphdr);
+	}
+
+	if (ret == -1)
+		error(1, errno, "recv");
+	if (ret != cfg_payload_len)
+		error(1, 0, "recv: ret=%u != %u", ret, cfg_payload_len);
+	if (ret > sizeof(buf) - off)
+		ret = sizeof(buf) - off;
+	if (memcmp(buf + off, payload, ret))
+		error(1, 0, "recv: data mismatch");
+
+	packets++;
+	bytes += cfg_payload_len;
+}
+
+static void do_rx(int domain, int type, int protocol)
+{
+	const int cfg_receiver_wait_ms = 400;
+	uint64_t tstop;
+	int fd;
+
+	fd = do_setup_rx(domain, type, protocol);
+
+	tstop = gettimeofday_ms() + cfg_runtime_ms + cfg_receiver_wait_ms;
+	do {
+		if (type == SOCK_STREAM)
+			do_flush_tcp(fd);
+		else
+			do_flush_datagram(fd, type);
+
+		do_poll(fd, POLLIN);
+
+	} while (gettimeofday_ms() < tstop);
+
+	if (close(fd))
+		error(1, errno, "close");
+
+	fprintf(stderr, "rx=%lu (%lu MB)\n", packets, bytes >> 20);
+}
+
+static void do_test(int domain, int type, int protocol)
+{
+	int i;
+
+	if (cfg_cork && (domain == PF_PACKET || type != SOCK_DGRAM))
+		error(1, 0, "can only cork udp sockets");
+
+	do_setcpu(cfg_cpu);
+
+	for (i = 0; i < IP_MAXPACKET; i++)
+		payload[i] = 'a' + (i % 26);
+
+	if (cfg_rx)
+		do_rx(domain, type, protocol);
+	else
+		do_tx(domain, type, protocol);
+}
+
+static void usage(const char *filepath)
+{
+	error(1, 0, "Usage: %s [options] <test>", filepath);
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	const int max_payload_len = sizeof(payload) -
+				    sizeof(struct ipv6hdr) -
+				    sizeof(struct tcphdr) -
+				    40 /* max tcp options */;
+	int c;
+	char *daddr = NULL, *saddr = NULL;
+	char *cfg_test;
+
+	cfg_payload_len = max_payload_len;
+
+	while ((c = getopt(argc, argv, "46c:C:D:i:mp:rs:S:t:vz")) != -1) {
+		switch (c) {
+		case '4':
+			if (cfg_family != PF_UNSPEC)
+				error(1, 0, "Pass one of -4 or -6");
+			cfg_family = PF_INET;
+			cfg_alen = sizeof(struct sockaddr_in);
+			break;
+		case '6':
+			if (cfg_family != PF_UNSPEC)
+				error(1, 0, "Pass one of -4 or -6");
+			cfg_family = PF_INET6;
+			cfg_alen = sizeof(struct sockaddr_in6);
+			break;
+		case 'c':
+			cfg_cork = strtol(optarg, NULL, 0);
+			break;
+		case 'C':
+			cfg_cpu = strtol(optarg, NULL, 0);
+			break;
+		case 'D':
+			daddr = optarg;
+			break;
+		case 'i':
+			cfg_ifindex = if_nametoindex(optarg);
+			if (cfg_ifindex == 0)
+				error(1, errno, "invalid iface: %s", optarg);
+			break;
+		case 'm':
+			cfg_cork_mixed = true;
+			break;
+		case 'p':
+			cfg_port = strtoul(optarg, NULL, 0);
+			break;
+		case 'r':
+			cfg_rx = true;
+			break;
+		case 's':
+			cfg_payload_len = strtoul(optarg, NULL, 0);
+			break;
+		case 'S':
+			saddr = optarg;
+			break;
+		case 't':
+			cfg_runtime_ms = 200 + strtoul(optarg, NULL, 10) * 1000;
+			break;
+		case 'v':
+			cfg_verbose++;
+			break;
+		case 'z':
+			cfg_zerocopy = true;
+			break;
+		}
+	}
+
+	cfg_test = argv[argc - 1];
+	if (strcmp(cfg_test, "rds") == 0) {
+		if (!daddr)
+			error(1, 0, "-D <server addr> required for PF_RDS\n");
+		if (!cfg_rx && !saddr)
+			error(1, 0, "-S <client addr> required for PF_RDS\n");
+	}
+	setup_sockaddr(cfg_family, daddr, &cfg_dst_addr);
+	setup_sockaddr(cfg_family, saddr, &cfg_src_addr);
+
+	if (cfg_payload_len > max_payload_len)
+		error(1, 0, "-s: payload exceeds max (%d)", max_payload_len);
+	if (cfg_cork_mixed && (!cfg_zerocopy || !cfg_cork))
+		error(1, 0, "-m: cork_mixed requires corking and zerocopy");
+
+	if (optind != argc - 1)
+		usage(argv[0]);
+}
+
+int main(int argc, char **argv)
+{
+	const char *cfg_test;
+
+	parse_opts(argc, argv);
+
+	cfg_test = argv[argc - 1];
+
+	if (!strcmp(cfg_test, "packet"))
+		do_test(PF_PACKET, SOCK_RAW, 0);
+	else if (!strcmp(cfg_test, "packet_dgram"))
+		do_test(PF_PACKET, SOCK_DGRAM, 0);
+	else if (!strcmp(cfg_test, "raw"))
+		do_test(cfg_family, SOCK_RAW, IPPROTO_EGP);
+	else if (!strcmp(cfg_test, "raw_hdrincl"))
+		do_test(cfg_family, SOCK_RAW, IPPROTO_RAW);
+	else if (!strcmp(cfg_test, "tcp"))
+		do_test(cfg_family, SOCK_STREAM, 0);
+	else if (!strcmp(cfg_test, "udp"))
+		do_test(cfg_family, SOCK_DGRAM, 0);
+	else if (!strcmp(cfg_test, "rds"))
+		do_test(PF_RDS, SOCK_SEQPACKET, 0);
+	else
+		error(1, 0, "unknown cfg_test %s", cfg_test);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/msg_zerocopy.sh b/tools/testing/selftests/net/msg_zerocopy.sh
new file mode 100755
index 000000000..825ffec85
--- /dev/null
+++ b/tools/testing/selftests/net/msg_zerocopy.sh
@@ -0,0 +1,122 @@
+#!/bin/bash
+#
+# Send data between two processes across namespaces
+# Run twice: once without and once with zerocopy
+
+set -e
+
+readonly DEV="veth0"
+readonly DEV_MTU=65535
+readonly BIN="./msg_zerocopy"
+
+readonly RAND="$(mktemp -u XXXXXX)"
+readonly NSPREFIX="ns-${RAND}"
+readonly NS1="${NSPREFIX}1"
+readonly NS2="${NSPREFIX}2"
+
+readonly SADDR4='192.168.1.1'
+readonly DADDR4='192.168.1.2'
+readonly SADDR6='fd::1'
+readonly DADDR6='fd::2'
+
+readonly path_sysctl_mem="net.core.optmem_max"
+
+# No arguments: automated test
+if [[ "$#" -eq "0" ]]; then
+	$0 4 tcp -t 1
+	$0 6 tcp -t 1
+	$0 4 udp -t 1
+	$0 6 udp -t 1
+	echo "OK. All tests passed"
+	exit 0
+fi
+
+# Argument parsing
+if [[ "$#" -lt "2" ]]; then
+	echo "Usage: $0 [4|6] [tcp|udp|raw|raw_hdrincl|packet|packet_dgram] <args>"
+	exit 1
+fi
+
+readonly IP="$1"
+shift
+readonly TXMODE="$1"
+shift
+readonly EXTRA_ARGS="$@"
+
+# Argument parsing: configure addresses
+if [[ "${IP}" == "4" ]]; then
+	readonly SADDR="${SADDR4}"
+	readonly DADDR="${DADDR4}"
+elif [[ "${IP}" == "6" ]]; then
+	readonly SADDR="${SADDR6}"
+	readonly DADDR="${DADDR6}"
+else
+	echo "Invalid IP version ${IP}"
+	exit 1
+fi
+
+# Argument parsing: select receive mode
+#
+# This differs from send mode for
+# - packet:	use raw recv, because packet receives skb clones
+# - raw_hdrinc: use raw recv, because hdrincl is a tx-only option
+case "${TXMODE}" in
+'packet' | 'packet_dgram' | 'raw_hdrincl')
+	RXMODE='raw'
+	;;
+*)
+	RXMODE="${TXMODE}"
+	;;
+esac
+
+# Start of state changes: install cleanup handler
+save_sysctl_mem="$(sysctl -n ${path_sysctl_mem})"
+
+cleanup() {
+	ip netns del "${NS2}"
+	ip netns del "${NS1}"
+	sysctl -w -q "${path_sysctl_mem}=${save_sysctl_mem}"
+}
+
+trap cleanup EXIT
+
+# Configure system settings
+sysctl -w -q "${path_sysctl_mem}=1000000"
+
+# Create virtual ethernet pair between network namespaces
+ip netns add "${NS1}"
+ip netns add "${NS2}"
+
+ip link add "${DEV}" mtu "${DEV_MTU}" netns "${NS1}" type veth \
+  peer name "${DEV}" mtu "${DEV_MTU}" netns "${NS2}"
+
+# Bring the devices up
+ip -netns "${NS1}" link set "${DEV}" up
+ip -netns "${NS2}" link set "${DEV}" up
+
+# Set fixed MAC addresses on the devices
+ip -netns "${NS1}" link set dev "${DEV}" address 02:02:02:02:02:02
+ip -netns "${NS2}" link set dev "${DEV}" address 06:06:06:06:06:06
+
+# Add fixed IP addresses to the devices
+ip -netns "${NS1}" addr add 192.168.1.1/24 dev "${DEV}"
+ip -netns "${NS2}" addr add 192.168.1.2/24 dev "${DEV}"
+ip -netns "${NS1}" addr add       fd::1/64 dev "${DEV}" nodad
+ip -netns "${NS2}" addr add       fd::2/64 dev "${DEV}" nodad
+
+# Optionally disable sg or csum offload to test edge cases
+# ip netns exec "${NS1}" ethtool -K "${DEV}" sg off
+
+do_test() {
+	local readonly ARGS="$1"
+
+	echo "ipv${IP} ${TXMODE} ${ARGS}"
+	ip netns exec "${NS2}" "${BIN}" "-${IP}" -i "${DEV}" -t 2 -C 2 -S "${SADDR}" -D "${DADDR}" ${ARGS} -r "${RXMODE}" &
+	sleep 0.2
+	ip netns exec "${NS1}" "${BIN}" "-${IP}" -i "${DEV}" -t 1 -C 3 -S "${SADDR}" -D "${DADDR}" ${ARGS} "${TXMODE}"
+	wait
+}
+
+do_test "${EXTRA_ARGS}"
+do_test "-z ${EXTRA_ARGS}"
+echo ok
diff --git a/tools/testing/selftests/net/netdevice.sh b/tools/testing/selftests/net/netdevice.sh
new file mode 100755
index 000000000..e3afcb424
--- /dev/null
+++ b/tools/testing/selftests/net/netdevice.sh
@@ -0,0 +1,205 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# This test is for checking network interface
+# For the moment it tests only ethernet interface (but wifi could be easily added)
+#
+# We assume that all network driver are loaded
+# if not they probably have failed earlier in the boot process and their logged error will be catched by another test
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# this function will try to up the interface
+# if already up, nothing done
+# arg1: network interface name
+kci_net_start()
+{
+	netdev=$1
+
+	ip link show "$netdev" |grep -q UP
+	if [ $? -eq 0 ];then
+		echo "SKIP: $netdev: interface already up"
+		return $ksft_skip
+	fi
+
+	ip link set "$netdev" up
+	if [ $? -ne 0 ];then
+		echo "FAIL: $netdev: Fail to up interface"
+		return 1
+	else
+		echo "PASS: $netdev: set interface up"
+		NETDEV_STARTED=1
+	fi
+	return 0
+}
+
+# this function will try to setup an IP and MAC address on a network interface
+# Doing nothing if the interface was already up
+# arg1: network interface name
+kci_net_setup()
+{
+	netdev=$1
+
+	# do nothing if the interface was already up
+	if [ $NETDEV_STARTED -eq 0 ];then
+		return 0
+	fi
+
+	MACADDR='02:03:04:05:06:07'
+	ip link set dev $netdev address "$MACADDR"
+	if [ $? -ne 0 ];then
+		echo "FAIL: $netdev: Cannot set MAC address"
+	else
+		ip link show $netdev |grep -q "$MACADDR"
+		if [ $? -eq 0 ];then
+			echo "PASS: $netdev: set MAC address"
+		else
+			echo "FAIL: $netdev: Cannot set MAC address"
+		fi
+	fi
+
+	#check that the interface did not already have an IP
+	ip address show "$netdev" |grep '^[[:space:]]*inet'
+	if [ $? -eq 0 ];then
+		echo "SKIP: $netdev: already have an IP"
+		return $ksft_skip
+	fi
+
+	# TODO what ipaddr to set ? DHCP ?
+	echo "SKIP: $netdev: set IP address"
+	return $ksft_skip
+}
+
+# test an ethtool command
+# arg1: return code for not supported (see ethtool code source)
+# arg2: summary of the command
+# arg3: command to execute
+kci_netdev_ethtool_test()
+{
+	if [ $# -le 2 ];then
+		echo "SKIP: $netdev: ethtool: invalid number of arguments"
+		return 1
+	fi
+	$3 >/dev/null
+	ret=$?
+	if [ $ret -ne 0 ];then
+		if [ $ret -eq "$1" ];then
+			echo "SKIP: $netdev: ethtool $2 not supported"
+			return $ksft_skip
+		else
+			echo "FAIL: $netdev: ethtool $2"
+			return 1
+		fi
+	else
+		echo "PASS: $netdev: ethtool $2"
+	fi
+	return 0
+}
+
+# test ethtool commands
+# arg1: network interface name
+kci_netdev_ethtool()
+{
+	netdev=$1
+
+	#check presence of ethtool
+	ethtool --version 2>/dev/null >/dev/null
+	if [ $? -ne 0 ];then
+		echo "SKIP: ethtool not present"
+		return $ksft_skip
+	fi
+
+	TMP_ETHTOOL_FEATURES="$(mktemp)"
+	if [ ! -e "$TMP_ETHTOOL_FEATURES" ];then
+		echo "SKIP: Cannot create a tmp file"
+		return 1
+	fi
+
+	ethtool -k "$netdev" > "$TMP_ETHTOOL_FEATURES"
+	if [ $? -ne 0 ];then
+		echo "FAIL: $netdev: ethtool list features"
+		rm "$TMP_ETHTOOL_FEATURES"
+		return 1
+	fi
+	echo "PASS: $netdev: ethtool list features"
+	#TODO for each non fixed features, try to turn them on/off
+	rm "$TMP_ETHTOOL_FEATURES"
+
+	kci_netdev_ethtool_test 74 'dump' "ethtool -d $netdev"
+	kci_netdev_ethtool_test 94 'stats' "ethtool -S $netdev"
+	return 0
+}
+
+# stop a netdev
+# arg1: network interface name
+kci_netdev_stop()
+{
+	netdev=$1
+
+	if [ $NETDEV_STARTED -eq 0 ];then
+		echo "SKIP: $netdev: interface kept up"
+		return 0
+	fi
+
+	ip link set "$netdev" down
+	if [ $? -ne 0 ];then
+		echo "FAIL: $netdev: stop interface"
+		return 1
+	fi
+	echo "PASS: $netdev: stop interface"
+	return 0
+}
+
+# run all test on a netdev
+# arg1: network interface name
+kci_test_netdev()
+{
+	NETDEV_STARTED=0
+	IFACE_TO_UPDOWN="$1"
+	IFACE_TO_TEST="$1"
+	#check for VLAN interface
+	MASTER_IFACE="$(echo $1 | cut -d@ -f2)"
+	if [ ! -z "$MASTER_IFACE" ];then
+		IFACE_TO_UPDOWN="$MASTER_IFACE"
+		IFACE_TO_TEST="$(echo $1 | cut -d@ -f1)"
+	fi
+
+	NETDEV_STARTED=0
+	kci_net_start "$IFACE_TO_UPDOWN"
+
+	kci_net_setup "$IFACE_TO_TEST"
+
+	kci_netdev_ethtool "$IFACE_TO_TEST"
+
+	kci_netdev_stop "$IFACE_TO_UPDOWN"
+	return 0
+}
+
+#check for needed privileges
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip
+fi
+
+ip link show 2>/dev/null >/dev/null
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without the ip tool"
+	exit $ksft_skip
+fi
+
+TMP_LIST_NETDEV="$(mktemp)"
+if [ ! -e "$TMP_LIST_NETDEV" ];then
+	echo "FAIL: Cannot create a tmp file"
+	exit 1
+fi
+
+ip link show |grep '^[0-9]' | grep -oE '[[:space:]].*eth[0-9]*:|[[:space:]].*enp[0-9]s[0-9]:' | cut -d\  -f2 | cut -d: -f1> "$TMP_LIST_NETDEV"
+while read netdev
+do
+	kci_test_netdev "$netdev"
+done < "$TMP_LIST_NETDEV"
+
+rm "$TMP_LIST_NETDEV"
+exit 0
diff --git a/tools/testing/selftests/net/nettest.c b/tools/testing/selftests/net/nettest.c
new file mode 100644
index 000000000..f75c53ce0
--- /dev/null
+++ b/tools/testing/selftests/net/nettest.c
@@ -0,0 +1,1815 @@
+// SPDX-License-Identifier: GPL-2.0
+/* nettest - used for functional tests of networking APIs
+ *
+ * Copyright (c) 2013-2019 David Ahern <dsahern@gmail.com>. All rights reserved.
+ */
+
+#define _GNU_SOURCE
+#include <features.h>
+#include <sys/types.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <linux/tcp.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#include <fcntl.h>
+#include <libgen.h>
+#include <limits.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <time.h>
+#include <errno.h>
+
+#ifndef IPV6_UNICAST_IF
+#define IPV6_UNICAST_IF         76
+#endif
+#ifndef IPV6_MULTICAST_IF
+#define IPV6_MULTICAST_IF       17
+#endif
+
+#define DEFAULT_PORT 12345
+
+#ifndef MAX
+#define MAX(a, b)  ((a) > (b) ? (a) : (b))
+#endif
+#ifndef MIN
+#define MIN(a, b)  ((a) < (b) ? (a) : (b))
+#endif
+
+struct sock_args {
+	/* local address */
+	union {
+		struct in_addr  in;
+		struct in6_addr in6;
+	} local_addr;
+
+	/* remote address */
+	union {
+		struct in_addr  in;
+		struct in6_addr in6;
+	} remote_addr;
+	int scope_id;  /* remote scope; v6 send only */
+
+	struct in_addr grp;     /* multicast group */
+
+	unsigned int has_local_ip:1,
+		     has_remote_ip:1,
+		     has_grp:1,
+		     has_expected_laddr:1,
+		     has_expected_raddr:1,
+		     bind_test_only:1;
+
+	unsigned short port;
+
+	int type;      /* DGRAM, STREAM, RAW */
+	int protocol;
+	int version;   /* AF_INET/AF_INET6 */
+
+	int use_setsockopt;
+	int use_cmsg;
+	const char *dev;
+	int ifindex;
+
+	const char *password;
+	/* prefix for MD5 password */
+	union {
+		struct sockaddr_in v4;
+		struct sockaddr_in6 v6;
+	} md5_prefix;
+	unsigned int prefix_len;
+
+	/* expected addresses and device index for connection */
+	int expected_ifindex;
+
+	/* local address */
+	union {
+		struct in_addr  in;
+		struct in6_addr in6;
+	} expected_laddr;
+
+	/* remote address */
+	union {
+		struct in_addr  in;
+		struct in6_addr in6;
+	} expected_raddr;
+};
+
+static int server_mode;
+static unsigned int prog_timeout = 5;
+static unsigned int interactive;
+static int iter = 1;
+static char *msg = "Hello world!";
+static int msglen;
+static int quiet;
+static int try_broadcast = 1;
+
+static char *timestamp(char *timebuf, int buflen)
+{
+	time_t now;
+
+	now = time(NULL);
+	if (strftime(timebuf, buflen, "%T", localtime(&now)) == 0) {
+		memset(timebuf, 0, buflen);
+		strncpy(timebuf, "00:00:00", buflen-1);
+	}
+
+	return timebuf;
+}
+
+static void log_msg(const char *format, ...)
+{
+	char timebuf[64];
+	va_list args;
+
+	if (quiet)
+		return;
+
+	fprintf(stdout, "%s %s:",
+		timestamp(timebuf, sizeof(timebuf)),
+		server_mode ? "server" : "client");
+	va_start(args, format);
+	vfprintf(stdout, format, args);
+	va_end(args);
+
+	fflush(stdout);
+}
+
+static void log_error(const char *format, ...)
+{
+	char timebuf[64];
+	va_list args;
+
+	if (quiet)
+		return;
+
+	fprintf(stderr, "%s %s:",
+		timestamp(timebuf, sizeof(timebuf)),
+		server_mode ? "server" : "client");
+	va_start(args, format);
+	vfprintf(stderr, format, args);
+	va_end(args);
+
+	fflush(stderr);
+}
+
+static void log_err_errno(const char *fmt, ...)
+{
+	char timebuf[64];
+	va_list args;
+
+	if (quiet)
+		return;
+
+	fprintf(stderr, "%s %s: ",
+		timestamp(timebuf, sizeof(timebuf)),
+		server_mode ? "server" : "client");
+	va_start(args, fmt);
+	vfprintf(stderr, fmt, args);
+	va_end(args);
+
+	fprintf(stderr, ": %d: %s\n", errno, strerror(errno));
+	fflush(stderr);
+}
+
+static void log_address(const char *desc, struct sockaddr *sa)
+{
+	char addrstr[64];
+
+	if (quiet)
+		return;
+
+	if (sa->sa_family == AF_INET) {
+		struct sockaddr_in *s = (struct sockaddr_in *) sa;
+
+		log_msg("%s %s:%d",
+			desc,
+			inet_ntop(AF_INET, &s->sin_addr, addrstr,
+				  sizeof(addrstr)),
+			ntohs(s->sin_port));
+
+	} else if (sa->sa_family == AF_INET6) {
+		struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa;
+
+		log_msg("%s [%s]:%d",
+			desc,
+			inet_ntop(AF_INET6, &s6->sin6_addr, addrstr,
+				  sizeof(addrstr)),
+			ntohs(s6->sin6_port));
+	}
+
+	printf("\n");
+
+	fflush(stdout);
+}
+
+static int tcp_md5sig(int sd, void *addr, socklen_t alen, struct sock_args *args)
+{
+	int keylen = strlen(args->password);
+	struct tcp_md5sig md5sig = {};
+	int opt = TCP_MD5SIG;
+	int rc;
+
+	md5sig.tcpm_keylen = keylen;
+	memcpy(md5sig.tcpm_key, args->password, keylen);
+
+	if (args->prefix_len) {
+		opt = TCP_MD5SIG_EXT;
+		md5sig.tcpm_flags |= TCP_MD5SIG_FLAG_PREFIX;
+
+		md5sig.tcpm_prefixlen = args->prefix_len;
+		addr = &args->md5_prefix;
+	}
+	memcpy(&md5sig.tcpm_addr, addr, alen);
+
+	if (args->ifindex) {
+		opt = TCP_MD5SIG_EXT;
+		md5sig.tcpm_flags |= TCP_MD5SIG_FLAG_IFINDEX;
+
+		md5sig.tcpm_ifindex = args->ifindex;
+	}
+
+	rc = setsockopt(sd, IPPROTO_TCP, opt, &md5sig, sizeof(md5sig));
+	if (rc < 0) {
+		/* ENOENT is harmless. Returned when a password is cleared */
+		if (errno == ENOENT)
+			rc = 0;
+		else
+			log_err_errno("setsockopt(TCP_MD5SIG)");
+	}
+
+	return rc;
+}
+
+static int tcp_md5_remote(int sd, struct sock_args *args)
+{
+	struct sockaddr_in sin = {
+		.sin_family = AF_INET,
+	};
+	struct sockaddr_in6 sin6 = {
+		.sin6_family = AF_INET6,
+	};
+	void *addr;
+	int alen;
+
+	switch (args->version) {
+	case AF_INET:
+		sin.sin_port = htons(args->port);
+		sin.sin_addr = args->remote_addr.in;
+		addr = &sin;
+		alen = sizeof(sin);
+		break;
+	case AF_INET6:
+		sin6.sin6_port = htons(args->port);
+		sin6.sin6_addr = args->remote_addr.in6;
+		addr = &sin6;
+		alen = sizeof(sin6);
+		break;
+	default:
+		log_error("unknown address family\n");
+		exit(1);
+	}
+
+	if (tcp_md5sig(sd, addr, alen, args))
+		return -1;
+
+	return 0;
+}
+
+static int get_ifidx(const char *ifname)
+{
+	struct ifreq ifdata;
+	int sd, rc;
+
+	if (!ifname || *ifname == '\0')
+		return -1;
+
+	memset(&ifdata, 0, sizeof(ifdata));
+
+	strcpy(ifdata.ifr_name, ifname);
+
+	sd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
+	if (sd < 0) {
+		log_err_errno("socket failed");
+		return -1;
+	}
+
+	rc = ioctl(sd, SIOCGIFINDEX, (char *)&ifdata);
+	close(sd);
+	if (rc != 0) {
+		log_err_errno("ioctl(SIOCGIFINDEX) failed");
+		return -1;
+	}
+
+	return ifdata.ifr_ifindex;
+}
+
+static int bind_to_device(int sd, const char *name)
+{
+	int rc;
+
+	rc = setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, name, strlen(name)+1);
+	if (rc < 0)
+		log_err_errno("setsockopt(SO_BINDTODEVICE)");
+
+	return rc;
+}
+
+static int get_bind_to_device(int sd, char *name, size_t len)
+{
+	int rc;
+	socklen_t optlen = len;
+
+	name[0] = '\0';
+	rc = getsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, name, &optlen);
+	if (rc < 0)
+		log_err_errno("setsockopt(SO_BINDTODEVICE)");
+
+	return rc;
+}
+
+static int check_device(int sd, struct sock_args *args)
+{
+	int ifindex = 0;
+	char name[32];
+
+	if (get_bind_to_device(sd, name, sizeof(name)))
+		*name = '\0';
+	else
+		ifindex = get_ifidx(name);
+
+	log_msg("    bound to device %s/%d\n",
+		*name ? name : "<none>", ifindex);
+
+	if (!args->expected_ifindex)
+		return 0;
+
+	if (args->expected_ifindex != ifindex) {
+		log_error("Device index mismatch: expected %d have %d\n",
+			  args->expected_ifindex, ifindex);
+		return 1;
+	}
+
+	log_msg("Device index matches: expected %d have %d\n",
+		args->expected_ifindex, ifindex);
+
+	return 0;
+}
+
+static int set_pktinfo_v4(int sd)
+{
+	int one = 1;
+	int rc;
+
+	rc = setsockopt(sd, SOL_IP, IP_PKTINFO, &one, sizeof(one));
+	if (rc < 0 && rc != -ENOTSUP)
+		log_err_errno("setsockopt(IP_PKTINFO)");
+
+	return rc;
+}
+
+static int set_recvpktinfo_v6(int sd)
+{
+	int one = 1;
+	int rc;
+
+	rc = setsockopt(sd, SOL_IPV6, IPV6_RECVPKTINFO, &one, sizeof(one));
+	if (rc < 0 && rc != -ENOTSUP)
+		log_err_errno("setsockopt(IPV6_RECVPKTINFO)");
+
+	return rc;
+}
+
+static int set_recverr_v4(int sd)
+{
+	int one = 1;
+	int rc;
+
+	rc = setsockopt(sd, SOL_IP, IP_RECVERR, &one, sizeof(one));
+	if (rc < 0 && rc != -ENOTSUP)
+		log_err_errno("setsockopt(IP_RECVERR)");
+
+	return rc;
+}
+
+static int set_recverr_v6(int sd)
+{
+	int one = 1;
+	int rc;
+
+	rc = setsockopt(sd, SOL_IPV6, IPV6_RECVERR, &one, sizeof(one));
+	if (rc < 0 && rc != -ENOTSUP)
+		log_err_errno("setsockopt(IPV6_RECVERR)");
+
+	return rc;
+}
+
+static int set_unicast_if(int sd, int ifindex, int version)
+{
+	int opt = IP_UNICAST_IF;
+	int level = SOL_IP;
+	int rc;
+
+	ifindex = htonl(ifindex);
+
+	if (version == AF_INET6) {
+		opt = IPV6_UNICAST_IF;
+		level = SOL_IPV6;
+	}
+	rc = setsockopt(sd, level, opt, &ifindex, sizeof(ifindex));
+	if (rc < 0)
+		log_err_errno("setsockopt(IP_UNICAST_IF)");
+
+	return rc;
+}
+
+static int set_multicast_if(int sd, int ifindex)
+{
+	struct ip_mreqn mreq = { .imr_ifindex = ifindex };
+	int rc;
+
+	rc = setsockopt(sd, SOL_IP, IP_MULTICAST_IF, &mreq, sizeof(mreq));
+	if (rc < 0)
+		log_err_errno("setsockopt(IP_MULTICAST_IF)");
+
+	return rc;
+}
+
+static int set_membership(int sd, uint32_t grp, uint32_t addr, int ifindex)
+{
+	uint32_t if_addr = addr;
+	struct ip_mreqn mreq;
+	int rc;
+
+	if (addr == htonl(INADDR_ANY) && !ifindex) {
+		log_error("Either local address or device needs to be given for multicast membership\n");
+		return -1;
+	}
+
+	mreq.imr_multiaddr.s_addr = grp;
+	mreq.imr_address.s_addr = if_addr;
+	mreq.imr_ifindex = ifindex;
+
+	rc = setsockopt(sd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq));
+	if (rc < 0) {
+		log_err_errno("setsockopt(IP_ADD_MEMBERSHIP)");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int set_broadcast(int sd)
+{
+	unsigned int one = 1;
+	int rc = 0;
+
+	if (setsockopt(sd, SOL_SOCKET, SO_BROADCAST, &one, sizeof(one)) != 0) {
+		log_err_errno("setsockopt(SO_BROADCAST)");
+		rc = -1;
+	}
+
+	return rc;
+}
+
+static int set_reuseport(int sd)
+{
+	unsigned int one = 1;
+	int rc = 0;
+
+	if (setsockopt(sd, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one)) != 0) {
+		log_err_errno("setsockopt(SO_REUSEPORT)");
+		rc = -1;
+	}
+
+	return rc;
+}
+
+static int set_reuseaddr(int sd)
+{
+	unsigned int one = 1;
+	int rc = 0;
+
+	if (setsockopt(sd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)) != 0) {
+		log_err_errno("setsockopt(SO_REUSEADDR)");
+		rc = -1;
+	}
+
+	return rc;
+}
+
+static int str_to_uint(const char *str, int min, int max, unsigned int *value)
+{
+	int number;
+	char *end;
+
+	errno = 0;
+	number = (unsigned int) strtoul(str, &end, 0);
+
+	/* entire string should be consumed by conversion
+	 * and value should be between min and max
+	 */
+	if (((*end == '\0') || (*end == '\n')) && (end != str) &&
+	    (errno != ERANGE) && (min <= number) && (number <= max)) {
+		*value = number;
+		return 0;
+	}
+
+	return -1;
+}
+
+static int expected_addr_match(struct sockaddr *sa, void *expected,
+			       const char *desc)
+{
+	char addrstr[64];
+	int rc = 0;
+
+	if (sa->sa_family == AF_INET) {
+		struct sockaddr_in *s = (struct sockaddr_in *) sa;
+		struct in_addr *exp_in = (struct in_addr *) expected;
+
+		if (s->sin_addr.s_addr != exp_in->s_addr) {
+			log_error("%s address does not match expected %s",
+				  desc,
+				  inet_ntop(AF_INET, exp_in,
+					    addrstr, sizeof(addrstr)));
+			rc = 1;
+		}
+	} else if (sa->sa_family == AF_INET6) {
+		struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa;
+		struct in6_addr *exp_in = (struct in6_addr *) expected;
+
+		if (memcmp(&s6->sin6_addr, exp_in, sizeof(*exp_in))) {
+			log_error("%s address does not match expected %s",
+				  desc,
+				  inet_ntop(AF_INET6, exp_in,
+					    addrstr, sizeof(addrstr)));
+			rc = 1;
+		}
+	} else {
+		log_error("%s address does not match expected - unknown family",
+			  desc);
+		rc = 1;
+	}
+
+	if (!rc)
+		log_msg("%s address matches expected\n", desc);
+
+	return rc;
+}
+
+static int show_sockstat(int sd, struct sock_args *args)
+{
+	struct sockaddr_in6 local_addr, remote_addr;
+	socklen_t alen = sizeof(local_addr);
+	struct sockaddr *sa;
+	const char *desc;
+	int rc = 0;
+
+	desc = server_mode ? "server local:" : "client local:";
+	sa = (struct sockaddr *) &local_addr;
+	if (getsockname(sd, sa, &alen) == 0) {
+		log_address(desc, sa);
+
+		if (args->has_expected_laddr) {
+			rc = expected_addr_match(sa, &args->expected_laddr,
+						 "local");
+		}
+	} else {
+		log_err_errno("getsockname failed");
+	}
+
+	sa = (struct sockaddr *) &remote_addr;
+	desc = server_mode ? "server peer:" : "client peer:";
+	if (getpeername(sd, sa, &alen) == 0) {
+		log_address(desc, sa);
+
+		if (args->has_expected_raddr) {
+			rc |= expected_addr_match(sa, &args->expected_raddr,
+						 "remote");
+		}
+	} else {
+		log_err_errno("getpeername failed");
+	}
+
+	return rc;
+}
+
+static int get_index_from_cmsg(struct msghdr *m)
+{
+	struct cmsghdr *cm;
+	int ifindex = 0;
+	char buf[64];
+
+	for (cm = (struct cmsghdr *)CMSG_FIRSTHDR(m);
+	     m->msg_controllen != 0 && cm;
+	     cm = (struct cmsghdr *)CMSG_NXTHDR(m, cm)) {
+
+		if (cm->cmsg_level == SOL_IP &&
+		    cm->cmsg_type == IP_PKTINFO) {
+			struct in_pktinfo *pi;
+
+			pi = (struct in_pktinfo *)(CMSG_DATA(cm));
+			inet_ntop(AF_INET, &pi->ipi_addr, buf, sizeof(buf));
+			ifindex = pi->ipi_ifindex;
+		} else if (cm->cmsg_level == SOL_IPV6 &&
+			   cm->cmsg_type == IPV6_PKTINFO) {
+			struct in6_pktinfo *pi6;
+
+			pi6 = (struct in6_pktinfo *)(CMSG_DATA(cm));
+			inet_ntop(AF_INET6, &pi6->ipi6_addr, buf, sizeof(buf));
+			ifindex = pi6->ipi6_ifindex;
+		}
+	}
+
+	if (ifindex) {
+		log_msg("    pktinfo: ifindex %d dest addr %s\n",
+			ifindex, buf);
+	}
+	return ifindex;
+}
+
+static int send_msg_no_cmsg(int sd, void *addr, socklen_t alen)
+{
+	int err;
+
+again:
+	err = sendto(sd, msg, msglen, 0, addr, alen);
+	if (err < 0) {
+		if (errno == EACCES && try_broadcast) {
+			try_broadcast = 0;
+			if (!set_broadcast(sd))
+				goto again;
+			errno = EACCES;
+		}
+
+		log_err_errno("sendto failed");
+		return 1;
+	}
+
+	return 0;
+}
+
+static int send_msg_cmsg(int sd, void *addr, socklen_t alen,
+			 int ifindex, int version)
+{
+	unsigned char cmsgbuf[64];
+	struct iovec iov[2];
+	struct cmsghdr *cm;
+	struct msghdr m;
+	int err;
+
+	iov[0].iov_base = msg;
+	iov[0].iov_len = msglen;
+	m.msg_iov = iov;
+	m.msg_iovlen = 1;
+	m.msg_name = (caddr_t)addr;
+	m.msg_namelen = alen;
+
+	memset(cmsgbuf, 0, sizeof(cmsgbuf));
+	cm = (struct cmsghdr *)cmsgbuf;
+	m.msg_control = (caddr_t)cm;
+
+	if (version == AF_INET) {
+		struct in_pktinfo *pi;
+
+		cm->cmsg_level = SOL_IP;
+		cm->cmsg_type = IP_PKTINFO;
+		cm->cmsg_len = CMSG_LEN(sizeof(struct in_pktinfo));
+		pi = (struct in_pktinfo *)(CMSG_DATA(cm));
+		pi->ipi_ifindex = ifindex;
+
+		m.msg_controllen = cm->cmsg_len;
+
+	} else if (version == AF_INET6) {
+		struct in6_pktinfo *pi6;
+
+		cm->cmsg_level = SOL_IPV6;
+		cm->cmsg_type = IPV6_PKTINFO;
+		cm->cmsg_len = CMSG_LEN(sizeof(struct in6_pktinfo));
+
+		pi6 = (struct in6_pktinfo *)(CMSG_DATA(cm));
+		pi6->ipi6_ifindex = ifindex;
+
+		m.msg_controllen = cm->cmsg_len;
+	}
+
+again:
+	err = sendmsg(sd, &m, 0);
+	if (err < 0) {
+		if (errno == EACCES && try_broadcast) {
+			try_broadcast = 0;
+			if (!set_broadcast(sd))
+				goto again;
+			errno = EACCES;
+		}
+
+		log_err_errno("sendmsg failed");
+		return 1;
+	}
+
+	return 0;
+}
+
+
+static int send_msg(int sd, void *addr, socklen_t alen, struct sock_args *args)
+{
+	if (args->type == SOCK_STREAM) {
+		if (write(sd, msg, msglen) < 0) {
+			log_err_errno("write failed sending msg to peer");
+			return 1;
+		}
+	} else if (args->ifindex && args->use_cmsg) {
+		if (send_msg_cmsg(sd, addr, alen, args->ifindex, args->version))
+			return 1;
+	} else {
+		if (send_msg_no_cmsg(sd, addr, alen))
+			return 1;
+	}
+
+	log_msg("Sent message:\n");
+	log_msg("    %.24s%s\n", msg, msglen > 24 ? " ..." : "");
+
+	return 0;
+}
+
+static int socket_read_dgram(int sd, struct sock_args *args)
+{
+	unsigned char addr[sizeof(struct sockaddr_in6)];
+	struct sockaddr *sa = (struct sockaddr *) addr;
+	socklen_t alen = sizeof(addr);
+	struct iovec iov[2];
+	struct msghdr m = {
+		.msg_name = (caddr_t)addr,
+		.msg_namelen = alen,
+		.msg_iov = iov,
+		.msg_iovlen = 1,
+	};
+	unsigned char cmsgbuf[256];
+	struct cmsghdr *cm = (struct cmsghdr *)cmsgbuf;
+	char buf[16*1024];
+	int ifindex;
+	int len;
+
+	iov[0].iov_base = (caddr_t)buf;
+	iov[0].iov_len = sizeof(buf);
+
+	memset(cmsgbuf, 0, sizeof(cmsgbuf));
+	m.msg_control = (caddr_t)cm;
+	m.msg_controllen = sizeof(cmsgbuf);
+
+	len = recvmsg(sd, &m, 0);
+	if (len == 0) {
+		log_msg("peer closed connection.\n");
+		return 0;
+	} else if (len < 0) {
+		log_msg("failed to read message: %d: %s\n",
+			errno, strerror(errno));
+		return -1;
+	}
+
+	buf[len] = '\0';
+
+	log_address("Message from:", sa);
+	log_msg("    %.24s%s\n", buf, len > 24 ? " ..." : "");
+
+	ifindex = get_index_from_cmsg(&m);
+	if (args->expected_ifindex) {
+		if (args->expected_ifindex != ifindex) {
+			log_error("Device index mismatch: expected %d have %d\n",
+				  args->expected_ifindex, ifindex);
+			return -1;
+		}
+		log_msg("Device index matches: expected %d have %d\n",
+			args->expected_ifindex, ifindex);
+	}
+
+	if (!interactive && server_mode) {
+		if (sa->sa_family == AF_INET6) {
+			struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa;
+			struct in6_addr *in6 = &s6->sin6_addr;
+
+			if (IN6_IS_ADDR_V4MAPPED(in6)) {
+				const uint32_t *pa = (uint32_t *) &in6->s6_addr;
+				struct in_addr in4;
+				struct sockaddr_in *sin;
+
+				sin = (struct sockaddr_in *) addr;
+				pa += 3;
+				in4.s_addr = *pa;
+				sin->sin_addr = in4;
+				sin->sin_family = AF_INET;
+				if (send_msg_cmsg(sd, addr, alen,
+						  ifindex, AF_INET) < 0)
+					goto out_err;
+			}
+		}
+again:
+		iov[0].iov_len = len;
+
+		if (args->version == AF_INET6) {
+			struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) sa;
+
+			if (args->dev) {
+				/* avoid PKTINFO conflicts with bindtodev */
+				if (sendto(sd, buf, len, 0,
+					   (void *) addr, alen) < 0)
+					goto out_err;
+			} else {
+				/* kernel is allowing scope_id to be set to VRF
+				 * index for LLA. for sends to global address
+				 * reset scope id
+				 */
+				s6->sin6_scope_id = ifindex;
+				if (sendmsg(sd, &m, 0) < 0)
+					goto out_err;
+			}
+		} else {
+			int err;
+
+			err = sendmsg(sd, &m, 0);
+			if (err < 0) {
+				if (errno == EACCES && try_broadcast) {
+					try_broadcast = 0;
+					if (!set_broadcast(sd))
+						goto again;
+					errno = EACCES;
+				}
+				goto out_err;
+			}
+		}
+		log_msg("Sent message:\n");
+		log_msg("    %.24s%s\n", buf, len > 24 ? " ..." : "");
+	}
+
+	return 1;
+out_err:
+	log_err_errno("failed to send msg to peer");
+	return -1;
+}
+
+static int socket_read_stream(int sd)
+{
+	char buf[1024];
+	int len;
+
+	len = read(sd, buf, sizeof(buf)-1);
+	if (len == 0) {
+		log_msg("client closed connection.\n");
+		return 0;
+	} else if (len < 0) {
+		log_msg("failed to read message\n");
+		return -1;
+	}
+
+	buf[len] = '\0';
+	log_msg("Incoming message:\n");
+	log_msg("    %.24s%s\n", buf, len > 24 ? " ..." : "");
+
+	if (!interactive && server_mode) {
+		if (write(sd, buf, len) < 0) {
+			log_err_errno("failed to send buf");
+			return -1;
+		}
+		log_msg("Sent message:\n");
+		log_msg("     %.24s%s\n", buf, len > 24 ? " ..." : "");
+	}
+
+	return 1;
+}
+
+static int socket_read(int sd, struct sock_args *args)
+{
+	if (args->type == SOCK_STREAM)
+		return socket_read_stream(sd);
+
+	return socket_read_dgram(sd, args);
+}
+
+static int stdin_to_socket(int sd, int type, void *addr, socklen_t alen)
+{
+	char buf[1024];
+	int len;
+
+	if (fgets(buf, sizeof(buf), stdin) == NULL)
+		return 0;
+
+	len = strlen(buf);
+	if (type == SOCK_STREAM) {
+		if (write(sd, buf, len) < 0) {
+			log_err_errno("failed to send buf");
+			return -1;
+		}
+	} else {
+		int err;
+
+again:
+		err = sendto(sd, buf, len, 0, addr, alen);
+		if (err < 0) {
+			if (errno == EACCES && try_broadcast) {
+				try_broadcast = 0;
+				if (!set_broadcast(sd))
+					goto again;
+				errno = EACCES;
+			}
+			log_err_errno("failed to send msg to peer");
+			return -1;
+		}
+	}
+	log_msg("Sent message:\n");
+	log_msg("    %.24s%s\n", buf, len > 24 ? " ..." : "");
+
+	return 1;
+}
+
+static void set_recv_attr(int sd, int version)
+{
+	if (version == AF_INET6) {
+		set_recvpktinfo_v6(sd);
+		set_recverr_v6(sd);
+	} else {
+		set_pktinfo_v4(sd);
+		set_recverr_v4(sd);
+	}
+}
+
+static int msg_loop(int client, int sd, void *addr, socklen_t alen,
+		    struct sock_args *args)
+{
+	struct timeval timeout = { .tv_sec = prog_timeout }, *ptval = NULL;
+	fd_set rfds;
+	int nfds;
+	int rc;
+
+	if (args->type != SOCK_STREAM)
+		set_recv_attr(sd, args->version);
+
+	if (msg) {
+		msglen = strlen(msg);
+
+		/* client sends first message */
+		if (client) {
+			if (send_msg(sd, addr, alen, args))
+				return 1;
+		}
+		if (!interactive) {
+			ptval = &timeout;
+			if (!prog_timeout)
+				timeout.tv_sec = 5;
+		}
+	}
+
+	nfds = interactive ? MAX(fileno(stdin), sd)  + 1 : sd + 1;
+	while (1) {
+		FD_ZERO(&rfds);
+		FD_SET(sd, &rfds);
+		if (interactive)
+			FD_SET(fileno(stdin), &rfds);
+
+		rc = select(nfds, &rfds, NULL, NULL, ptval);
+		if (rc < 0) {
+			if (errno == EINTR)
+				continue;
+
+			rc = 1;
+			log_err_errno("select failed");
+			break;
+		} else if (rc == 0) {
+			log_error("Timed out waiting for response\n");
+			rc = 2;
+			break;
+		}
+
+		if (FD_ISSET(sd, &rfds)) {
+			rc = socket_read(sd, args);
+			if (rc < 0) {
+				rc = 1;
+				break;
+			}
+			if (rc == 0)
+				break;
+		}
+
+		rc = 0;
+
+		if (FD_ISSET(fileno(stdin), &rfds)) {
+			if (stdin_to_socket(sd, args->type, addr, alen) <= 0)
+				break;
+		}
+
+		if (interactive)
+			continue;
+
+		if (iter != -1) {
+			--iter;
+			if (iter == 0)
+				break;
+		}
+
+		log_msg("Going into quiet mode\n");
+		quiet = 1;
+
+		if (client) {
+			if (send_msg(sd, addr, alen, args)) {
+				rc = 1;
+				break;
+			}
+		}
+	}
+
+	return rc;
+}
+
+static int msock_init(struct sock_args *args, int server)
+{
+	uint32_t if_addr = htonl(INADDR_ANY);
+	struct sockaddr_in laddr = {
+		.sin_family = AF_INET,
+		.sin_port = htons(args->port),
+	};
+	int one = 1;
+	int sd;
+
+	if (!server && args->has_local_ip)
+		if_addr = args->local_addr.in.s_addr;
+
+	sd = socket(PF_INET, SOCK_DGRAM, 0);
+	if (sd < 0) {
+		log_err_errno("socket");
+		return -1;
+	}
+
+	if (setsockopt(sd, SOL_SOCKET, SO_REUSEADDR,
+		       (char *)&one, sizeof(one)) < 0) {
+		log_err_errno("Setting SO_REUSEADDR error");
+		goto out_err;
+	}
+
+	if (setsockopt(sd, SOL_SOCKET, SO_BROADCAST,
+		       (char *)&one, sizeof(one)) < 0)
+		log_err_errno("Setting SO_BROADCAST error");
+
+	if (args->dev && bind_to_device(sd, args->dev) != 0)
+		goto out_err;
+	else if (args->use_setsockopt &&
+		 set_multicast_if(sd, args->ifindex))
+		goto out_err;
+
+	laddr.sin_addr.s_addr = if_addr;
+
+	if (bind(sd, (struct sockaddr *) &laddr, sizeof(laddr)) < 0) {
+		log_err_errno("bind failed");
+		goto out_err;
+	}
+
+	if (server &&
+	    set_membership(sd, args->grp.s_addr,
+			   args->local_addr.in.s_addr, args->ifindex))
+		goto out_err;
+
+	return sd;
+out_err:
+	close(sd);
+	return -1;
+}
+
+static int msock_server(struct sock_args *args)
+{
+	return msock_init(args, 1);
+}
+
+static int msock_client(struct sock_args *args)
+{
+	return msock_init(args, 0);
+}
+
+static int bind_socket(int sd, struct sock_args *args)
+{
+	struct sockaddr_in serv_addr = {
+		.sin_family = AF_INET,
+	};
+	struct sockaddr_in6 serv6_addr = {
+		.sin6_family = AF_INET6,
+	};
+	void *addr;
+	socklen_t alen;
+
+	if (!args->has_local_ip && args->type == SOCK_RAW)
+		return 0;
+
+	switch (args->version) {
+	case AF_INET:
+		serv_addr.sin_port = htons(args->port);
+		serv_addr.sin_addr = args->local_addr.in;
+		addr = &serv_addr;
+		alen = sizeof(serv_addr);
+		break;
+
+	case AF_INET6:
+		serv6_addr.sin6_port = htons(args->port);
+		serv6_addr.sin6_addr = args->local_addr.in6;
+		addr = &serv6_addr;
+		alen = sizeof(serv6_addr);
+		break;
+
+	default:
+		log_error("Invalid address family\n");
+		return -1;
+	}
+
+	if (bind(sd, addr, alen) < 0) {
+		log_err_errno("error binding socket");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int lsock_init(struct sock_args *args)
+{
+	long flags;
+	int sd;
+
+	sd = socket(args->version, args->type, args->protocol);
+	if (sd < 0) {
+		log_err_errno("Error opening socket");
+		return  -1;
+	}
+
+	if (set_reuseaddr(sd) != 0)
+		goto err;
+
+	if (set_reuseport(sd) != 0)
+		goto err;
+
+	if (args->dev && bind_to_device(sd, args->dev) != 0)
+		goto err;
+	else if (args->use_setsockopt &&
+		 set_unicast_if(sd, args->ifindex, args->version))
+		goto err;
+
+	if (bind_socket(sd, args))
+		goto err;
+
+	if (args->bind_test_only)
+		goto out;
+
+	if (args->type == SOCK_STREAM && listen(sd, 1) < 0) {
+		log_err_errno("listen failed");
+		goto err;
+	}
+
+	flags = fcntl(sd, F_GETFL);
+	if ((flags < 0) || (fcntl(sd, F_SETFL, flags|O_NONBLOCK) < 0)) {
+		log_err_errno("Failed to set non-blocking option");
+		goto err;
+	}
+
+	if (fcntl(sd, F_SETFD, FD_CLOEXEC) < 0)
+		log_err_errno("Failed to set close-on-exec flag");
+
+out:
+	return sd;
+
+err:
+	close(sd);
+	return -1;
+}
+
+static int do_server(struct sock_args *args)
+{
+	struct timeval timeout = { .tv_sec = prog_timeout }, *ptval = NULL;
+	unsigned char addr[sizeof(struct sockaddr_in6)] = {};
+	socklen_t alen = sizeof(addr);
+	int lsd, csd = -1;
+
+	fd_set rfds;
+	int rc;
+
+	if (prog_timeout)
+		ptval = &timeout;
+
+	if (args->has_grp)
+		lsd = msock_server(args);
+	else
+		lsd = lsock_init(args);
+
+	if (lsd < 0)
+		return 1;
+
+	if (args->bind_test_only) {
+		close(lsd);
+		return 0;
+	}
+
+	if (args->type != SOCK_STREAM) {
+		rc = msg_loop(0, lsd, (void *) addr, alen, args);
+		close(lsd);
+		return rc;
+	}
+
+	if (args->password && tcp_md5_remote(lsd, args)) {
+		close(lsd);
+		return 1;
+	}
+
+	while (1) {
+		log_msg("\n");
+		log_msg("waiting for client connection.\n");
+		FD_ZERO(&rfds);
+		FD_SET(lsd, &rfds);
+
+		rc = select(lsd+1, &rfds, NULL, NULL, ptval);
+		if (rc == 0) {
+			rc = 2;
+			break;
+		}
+
+		if (rc < 0) {
+			if (errno == EINTR)
+				continue;
+
+			log_err_errno("select failed");
+			break;
+		}
+
+		if (FD_ISSET(lsd, &rfds)) {
+
+			csd = accept(lsd, (void *) addr, &alen);
+			if (csd < 0) {
+				log_err_errno("accept failed");
+				break;
+			}
+
+			rc = show_sockstat(csd, args);
+			if (rc)
+				break;
+
+			rc = check_device(csd, args);
+			if (rc)
+				break;
+		}
+
+		rc = msg_loop(0, csd, (void *) addr, alen, args);
+		close(csd);
+
+		if (!interactive)
+			break;
+	}
+
+	close(lsd);
+
+	return rc;
+}
+
+static int wait_for_connect(int sd)
+{
+	struct timeval _tv = { .tv_sec = prog_timeout }, *tv = NULL;
+	fd_set wfd;
+	int val = 0, sz = sizeof(val);
+	int rc;
+
+	FD_ZERO(&wfd);
+	FD_SET(sd, &wfd);
+
+	if (prog_timeout)
+		tv = &_tv;
+
+	rc = select(FD_SETSIZE, NULL, &wfd, NULL, tv);
+	if (rc == 0) {
+		log_error("connect timed out\n");
+		return -2;
+	} else if (rc < 0) {
+		log_err_errno("select failed");
+		return -3;
+	}
+
+	if (getsockopt(sd, SOL_SOCKET, SO_ERROR, &val, (socklen_t *)&sz) < 0) {
+		log_err_errno("getsockopt(SO_ERROR) failed");
+		return -4;
+	}
+
+	if (val != 0) {
+		log_error("connect failed: %d: %s\n", val, strerror(val));
+		return -1;
+	}
+
+	return 0;
+}
+
+static int connectsock(void *addr, socklen_t alen, struct sock_args *args)
+{
+	int sd, rc = -1;
+	long flags;
+
+	sd = socket(args->version, args->type, args->protocol);
+	if (sd < 0) {
+		log_err_errno("Failed to create socket");
+		return -1;
+	}
+
+	flags = fcntl(sd, F_GETFL);
+	if ((flags < 0) || (fcntl(sd, F_SETFL, flags|O_NONBLOCK) < 0)) {
+		log_err_errno("Failed to set non-blocking option");
+		goto err;
+	}
+
+	if (set_reuseport(sd) != 0)
+		goto err;
+
+	if (args->dev && bind_to_device(sd, args->dev) != 0)
+		goto err;
+	else if (args->use_setsockopt &&
+		 set_unicast_if(sd, args->ifindex, args->version))
+		goto err;
+
+	if (args->has_local_ip && bind_socket(sd, args))
+		goto err;
+
+	if (args->type != SOCK_STREAM)
+		goto out;
+
+	if (args->password && tcp_md5sig(sd, addr, alen, args))
+		goto err;
+
+	if (args->bind_test_only)
+		goto out;
+
+	if (connect(sd, addr, alen) < 0) {
+		if (errno != EINPROGRESS) {
+			log_err_errno("Failed to connect to remote host");
+			rc = -1;
+			goto err;
+		}
+		rc = wait_for_connect(sd);
+		if (rc < 0)
+			goto err;
+	}
+out:
+	return sd;
+
+err:
+	close(sd);
+	return rc;
+}
+
+static int do_client(struct sock_args *args)
+{
+	struct sockaddr_in sin = {
+		.sin_family = AF_INET,
+	};
+	struct sockaddr_in6 sin6 = {
+		.sin6_family = AF_INET6,
+	};
+	void *addr;
+	int alen;
+	int rc = 0;
+	int sd;
+
+	if (!args->has_remote_ip && !args->has_grp) {
+		fprintf(stderr, "remote IP or multicast group not given\n");
+		return 1;
+	}
+
+	switch (args->version) {
+	case AF_INET:
+		sin.sin_port = htons(args->port);
+		if (args->has_grp)
+			sin.sin_addr = args->grp;
+		else
+			sin.sin_addr = args->remote_addr.in;
+		addr = &sin;
+		alen = sizeof(sin);
+		break;
+	case AF_INET6:
+		sin6.sin6_port = htons(args->port);
+		sin6.sin6_addr = args->remote_addr.in6;
+		sin6.sin6_scope_id = args->scope_id;
+		addr = &sin6;
+		alen = sizeof(sin6);
+		break;
+	}
+
+	if (args->has_grp)
+		sd = msock_client(args);
+	else
+		sd = connectsock(addr, alen, args);
+
+	if (sd < 0)
+		return -sd;
+
+	if (args->bind_test_only)
+		goto out;
+
+	if (args->type == SOCK_STREAM) {
+		rc = show_sockstat(sd, args);
+		if (rc != 0)
+			goto out;
+	}
+
+	rc = msg_loop(1, sd, addr, alen, args);
+
+out:
+	close(sd);
+
+	return rc;
+}
+
+enum addr_type {
+	ADDR_TYPE_LOCAL,
+	ADDR_TYPE_REMOTE,
+	ADDR_TYPE_MCAST,
+	ADDR_TYPE_EXPECTED_LOCAL,
+	ADDR_TYPE_EXPECTED_REMOTE,
+	ADDR_TYPE_MD5_PREFIX,
+};
+
+static int convert_addr(struct sock_args *args, const char *_str,
+			enum addr_type atype)
+{
+	int pfx_len_max = args->version == AF_INET6 ? 128 : 32;
+	int family = args->version;
+	char *str, *dev, *sep;
+	struct in6_addr *in6;
+	struct in_addr  *in;
+	const char *desc;
+	void *addr;
+	int rc = 0;
+
+	str = strdup(_str);
+	if (!str)
+		return -ENOMEM;
+
+	switch (atype) {
+	case ADDR_TYPE_LOCAL:
+		desc = "local";
+		addr = &args->local_addr;
+		break;
+	case ADDR_TYPE_REMOTE:
+		desc = "remote";
+		addr = &args->remote_addr;
+		break;
+	case ADDR_TYPE_MCAST:
+		desc = "mcast grp";
+		addr = &args->grp;
+		break;
+	case ADDR_TYPE_EXPECTED_LOCAL:
+		desc = "expected local";
+		addr = &args->expected_laddr;
+		break;
+	case ADDR_TYPE_EXPECTED_REMOTE:
+		desc = "expected remote";
+		addr = &args->expected_raddr;
+		break;
+	case ADDR_TYPE_MD5_PREFIX:
+		desc = "md5 prefix";
+		if (family == AF_INET) {
+			args->md5_prefix.v4.sin_family = AF_INET;
+			addr = &args->md5_prefix.v4.sin_addr;
+		} else if (family == AF_INET6) {
+			args->md5_prefix.v6.sin6_family = AF_INET6;
+			addr = &args->md5_prefix.v6.sin6_addr;
+		} else
+			return 1;
+
+		sep = strchr(str, '/');
+		if (sep) {
+			*sep = '\0';
+			sep++;
+			if (str_to_uint(sep, 1, pfx_len_max,
+					&args->prefix_len) != 0) {
+				fprintf(stderr, "Invalid port\n");
+				return 1;
+			}
+		} else {
+			args->prefix_len = pfx_len_max;
+		}
+		break;
+	default:
+		log_error("unknown address type");
+		exit(1);
+	}
+
+	switch (family) {
+	case AF_INET:
+		in  = (struct in_addr *) addr;
+		if (str) {
+			if (inet_pton(AF_INET, str, in) == 0) {
+				log_error("Invalid %s IP address\n", desc);
+				rc = -1;
+				goto out;
+			}
+		} else {
+			in->s_addr = htonl(INADDR_ANY);
+		}
+		break;
+
+	case AF_INET6:
+		dev = strchr(str, '%');
+		if (dev) {
+			*dev = '\0';
+			dev++;
+		}
+
+		in6 = (struct in6_addr *) addr;
+		if (str) {
+			if (inet_pton(AF_INET6, str, in6) == 0) {
+				log_error("Invalid %s IPv6 address\n", desc);
+				rc = -1;
+				goto out;
+			}
+		} else {
+			*in6 = in6addr_any;
+		}
+		if (dev) {
+			args->scope_id = get_ifidx(dev);
+			if (args->scope_id < 0) {
+				log_error("Invalid scope on %s IPv6 address\n",
+					  desc);
+				rc = -1;
+				goto out;
+			}
+		}
+		break;
+
+	default:
+		log_error("Invalid address family\n");
+	}
+
+out:
+	free(str);
+	return rc;
+}
+
+static char *random_msg(int len)
+{
+	int i, n = 0, olen = len + 1;
+	char *m;
+
+	if (len <= 0)
+		return NULL;
+
+	m = malloc(olen);
+	if (!m)
+		return NULL;
+
+	while (len > 26) {
+		i = snprintf(m + n, olen - n, "%.26s",
+			     "abcdefghijklmnopqrstuvwxyz");
+		n += i;
+		len -= i;
+	}
+	i = snprintf(m + n, olen - n, "%.*s", len,
+		     "abcdefghijklmnopqrstuvwxyz");
+	return m;
+}
+
+#define GETOPT_STR  "sr:l:p:t:g:P:DRn:M:m:d:SCi6L:0:1:2:Fbq"
+
+static void print_usage(char *prog)
+{
+	printf(
+	"usage: %s OPTS\n"
+	"Required:\n"
+	"    -r addr       remote address to connect to (client mode only)\n"
+	"    -p port       port to connect to (client mode)/listen on (server mode)\n"
+	"                  (default: %d)\n"
+	"    -s            server mode (default: client mode)\n"
+	"    -t            timeout seconds (default: none)\n"
+	"\n"
+	"Optional:\n"
+	"    -F            Restart server loop\n"
+	"    -6            IPv6 (default is IPv4)\n"
+	"    -P proto      protocol for socket: icmp, ospf (default: none)\n"
+	"    -D|R          datagram (D) / raw (R) socket (default stream)\n"
+	"    -l addr       local address to bind to\n"
+	"\n"
+	"    -d dev        bind socket to given device name\n"
+	"    -S            use setsockopt (IP_UNICAST_IF or IP_MULTICAST_IF)\n"
+	"                  to set device binding\n"
+	"    -C            use cmsg and IP_PKTINFO to specify device binding\n"
+	"\n"
+	"    -L len        send random message of given length\n"
+	"    -n num        number of times to send message\n"
+	"\n"
+	"    -M password   use MD5 sum protection\n"
+	"    -m prefix/len prefix and length to use for MD5 key\n"
+	"    -g grp        multicast group (e.g., 239.1.1.1)\n"
+	"    -i            interactive mode (default is echo and terminate)\n"
+	"\n"
+	"    -0 addr       Expected local address\n"
+	"    -1 addr       Expected remote address\n"
+	"    -2 dev        Expected device name (or index) to receive packet\n"
+	"\n"
+	"    -b            Bind test only.\n"
+	"    -q            Be quiet. Run test without printing anything.\n"
+	, prog, DEFAULT_PORT);
+}
+
+int main(int argc, char *argv[])
+{
+	struct sock_args args = {
+		.version = AF_INET,
+		.type    = SOCK_STREAM,
+		.port    = DEFAULT_PORT,
+	};
+	struct protoent *pe;
+	unsigned int tmp;
+	int forever = 0;
+
+	/* process inputs */
+	extern char *optarg;
+	int rc = 0;
+
+	/*
+	 * process input args
+	 */
+
+	while ((rc = getopt(argc, argv, GETOPT_STR)) != -1) {
+		switch (rc) {
+		case 's':
+			server_mode = 1;
+			break;
+		case 'F':
+			forever = 1;
+			break;
+		case 'l':
+			args.has_local_ip = 1;
+			if (convert_addr(&args, optarg, ADDR_TYPE_LOCAL) < 0)
+				return 1;
+			break;
+		case 'r':
+			args.has_remote_ip = 1;
+			if (convert_addr(&args, optarg, ADDR_TYPE_REMOTE) < 0)
+				return 1;
+			break;
+		case 'p':
+			if (str_to_uint(optarg, 1, 65535, &tmp) != 0) {
+				fprintf(stderr, "Invalid port\n");
+				return 1;
+			}
+			args.port = (unsigned short) tmp;
+			break;
+		case 't':
+			if (str_to_uint(optarg, 0, INT_MAX,
+					&prog_timeout) != 0) {
+				fprintf(stderr, "Invalid timeout\n");
+				return 1;
+			}
+			break;
+		case 'D':
+			args.type = SOCK_DGRAM;
+			break;
+		case 'R':
+			args.type = SOCK_RAW;
+			args.port = 0;
+			if (!args.protocol)
+				args.protocol = IPPROTO_RAW;
+			break;
+		case 'P':
+			pe = getprotobyname(optarg);
+			if (pe) {
+				args.protocol = pe->p_proto;
+			} else {
+				if (str_to_uint(optarg, 0, 0xffff, &tmp) != 0) {
+					fprintf(stderr, "Invalid protocol\n");
+					return 1;
+				}
+				args.protocol = tmp;
+			}
+			break;
+		case 'n':
+			iter = atoi(optarg);
+			break;
+		case 'L':
+			msg = random_msg(atoi(optarg));
+			break;
+		case 'M':
+			args.password = optarg;
+			break;
+		case 'm':
+			if (convert_addr(&args, optarg, ADDR_TYPE_MD5_PREFIX) < 0)
+				return 1;
+			break;
+		case 'S':
+			args.use_setsockopt = 1;
+			break;
+		case 'C':
+			args.use_cmsg = 1;
+			break;
+		case 'd':
+			args.dev = optarg;
+			args.ifindex = get_ifidx(optarg);
+			if (args.ifindex < 0) {
+				fprintf(stderr, "Invalid device name\n");
+				return 1;
+			}
+			break;
+		case 'i':
+			interactive = 1;
+			break;
+		case 'g':
+			args.has_grp = 1;
+			if (convert_addr(&args, optarg, ADDR_TYPE_MCAST) < 0)
+				return 1;
+			args.type = SOCK_DGRAM;
+			break;
+		case '6':
+			args.version = AF_INET6;
+			break;
+		case 'b':
+			args.bind_test_only = 1;
+			break;
+		case '0':
+			args.has_expected_laddr = 1;
+			if (convert_addr(&args, optarg,
+					 ADDR_TYPE_EXPECTED_LOCAL))
+				return 1;
+			break;
+		case '1':
+			args.has_expected_raddr = 1;
+			if (convert_addr(&args, optarg,
+					 ADDR_TYPE_EXPECTED_REMOTE))
+				return 1;
+
+			break;
+		case '2':
+			if (str_to_uint(optarg, 0, INT_MAX, &tmp) == 0) {
+				args.expected_ifindex = (int)tmp;
+			} else {
+				args.expected_ifindex = get_ifidx(optarg);
+				if (args.expected_ifindex < 0) {
+					fprintf(stderr,
+						"Invalid expected device\n");
+					return 1;
+				}
+			}
+			break;
+		case 'q':
+			quiet = 1;
+			break;
+		default:
+			print_usage(argv[0]);
+			return 1;
+		}
+	}
+
+	if (args.password &&
+	    ((!args.has_remote_ip && !args.prefix_len) || args.type != SOCK_STREAM)) {
+		log_error("MD5 passwords apply to TCP only and require a remote ip for the password\n");
+		return 1;
+	}
+
+	if (args.prefix_len && !args.password) {
+		log_error("Prefix range for MD5 protection specified without a password\n");
+		return 1;
+	}
+
+	if ((args.use_setsockopt || args.use_cmsg) && !args.ifindex) {
+		fprintf(stderr, "Device binding not specified\n");
+		return 1;
+	}
+	if (args.use_setsockopt || args.use_cmsg)
+		args.dev = NULL;
+
+	if (iter == 0) {
+		fprintf(stderr, "Invalid number of messages to send\n");
+		return 1;
+	}
+
+	if (args.type == SOCK_STREAM && !args.protocol)
+		args.protocol = IPPROTO_TCP;
+	if (args.type == SOCK_DGRAM && !args.protocol)
+		args.protocol = IPPROTO_UDP;
+
+	if ((args.type == SOCK_STREAM || args.type == SOCK_DGRAM) &&
+	     args.port == 0) {
+		fprintf(stderr, "Invalid port number\n");
+		return 1;
+	}
+
+	if (!server_mode && !args.has_grp &&
+	    !args.has_remote_ip && !args.has_local_ip) {
+		fprintf(stderr,
+			"Local (server mode) or remote IP (client IP) required\n");
+		return 1;
+	}
+
+	if (interactive) {
+		prog_timeout = 0;
+		msg = NULL;
+	}
+
+	if (server_mode) {
+		do {
+			rc = do_server(&args);
+		} while (forever);
+
+		return rc;
+	}
+	return do_client(&args);
+}
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
new file mode 100755
index 000000000..3253fdc78
--- /dev/null
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -0,0 +1,1924 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Check that route PMTU values match expectations, and that initial device MTU
+# values are assigned correctly
+#
+# Tests currently implemented:
+#
+# - pmtu_ipv4
+#	Set up two namespaces, A and B, with two paths between them over routers
+#	R1 and R2 (also implemented with namespaces), with different MTUs:
+#
+#	  segment a_r1    segment b_r1		a_r1: 2000
+#	.--------------R1--------------.	b_r1: 1400
+#	A                               B	a_r2: 2000
+#	'--------------R2--------------'	b_r2: 1500
+#	  segment a_r2    segment b_r2
+#
+#	Check that PMTU exceptions with the correct PMTU are created. Then
+#	decrease and increase the MTU of the local link for one of the paths,
+#	A to R1, checking that route exception PMTU changes accordingly over
+#	this path. Also check that locked exceptions are created when an ICMP
+#	message advertising a PMTU smaller than net.ipv4.route.min_pmtu is
+#	received
+#
+# - pmtu_ipv6
+#	Same as pmtu_ipv4, except for locked PMTU tests, using IPv6
+#
+# - pmtu_ipv4_vxlan4_exception
+#	Set up the same network topology as pmtu_ipv4, create a VXLAN tunnel
+#	over IPv4 between A and B, routed via R1. On the link between R1 and B,
+#	set a MTU lower than the VXLAN MTU and the MTU on the link between A and
+#	R1. Send IPv4 packets, exceeding the MTU between R1 and B, over VXLAN
+#	from A to B and check that the PMTU exception is created with the right
+#	value on A
+#
+# - pmtu_ipv6_vxlan4_exception
+#	Same as pmtu_ipv4_vxlan4_exception, but send IPv6 packets from A to B
+#
+# - pmtu_ipv4_vxlan6_exception
+#	Same as pmtu_ipv4_vxlan4_exception, but use IPv6 transport from A to B
+#
+# - pmtu_ipv6_vxlan6_exception
+#	Same as pmtu_ipv4_vxlan6_exception, but send IPv6 packets from A to B
+#
+# - pmtu_ipv4_geneve4_exception
+#	Same as pmtu_ipv4_vxlan4_exception, but using a GENEVE tunnel instead of
+#	VXLAN
+#
+# - pmtu_ipv6_geneve4_exception
+#	Same as pmtu_ipv6_vxlan4_exception, but using a GENEVE tunnel instead of
+#	VXLAN
+#
+# - pmtu_ipv4_geneve6_exception
+#	Same as pmtu_ipv4_vxlan6_exception, but using a GENEVE tunnel instead of
+#	VXLAN
+#
+# - pmtu_ipv6_geneve6_exception
+#	Same as pmtu_ipv6_vxlan6_exception, but using a GENEVE tunnel instead of
+#	VXLAN
+#
+# - pmtu_ipv{4,6}_br_vxlan{4,6}_exception
+#	Set up three namespaces, A, B, and C, with routing between A and B over
+#	R1. R2 is unused in these tests. A has a veth connection to C, and is
+#	connected to B via a VXLAN endpoint, which is directly bridged to C.
+#	MTU on the B-R1 link is lower than other MTUs.
+#
+#	Check that both C and A are able to communicate with B over the VXLAN
+#	tunnel, and that PMTU exceptions with the correct values are created.
+#
+#	                  segment a_r1    segment b_r1            b_r1: 4000
+#	                .--------------R1--------------.    everything
+#	   C---veth     A                               B         else: 5000
+#	        ' bridge                                |
+#	            '---- - - - - - VXLAN - - - - - - - '
+#
+# - pmtu_ipv{4,6}_br_geneve{4,6}_exception
+#	Same as pmtu_ipv{4,6}_br_vxlan{4,6}_exception, with a GENEVE tunnel
+#	instead.
+#
+# - pmtu_ipv{4,6}_ovs_vxlan{4,6}_exception
+#	Set up two namespaces, B, and C, with routing between the init namespace
+#	and B over R1. A and R2 are unused in these tests. The init namespace
+#	has a veth connection to C, and is connected to B via a VXLAN endpoint,
+#	which is handled by Open vSwitch and bridged to C. MTU on the B-R1 link
+#	is lower than other MTUs.
+#
+#	Check that C is able to communicate with B over the VXLAN tunnel, and
+#	that PMTU exceptions with the correct values are created.
+#
+#	                  segment a_r1    segment b_r1            b_r1: 4000
+#	                .--------------R1--------------.    everything
+#	   C---veth    init                             B         else: 5000
+#	        '- ovs                                  |
+#	            '---- - - - - - VXLAN - - - - - - - '
+#
+# - pmtu_ipv{4,6}_ovs_geneve{4,6}_exception
+#	Same as pmtu_ipv{4,6}_ovs_vxlan{4,6}_exception, with a GENEVE tunnel
+#	instead.
+#
+# - pmtu_ipv{4,6}_fou{4,6}_exception
+#	Same as pmtu_ipv4_vxlan4, but using a direct IPv4/IPv6 encapsulation
+#	(FoU) over IPv4/IPv6, instead of VXLAN
+#
+# - pmtu_ipv{4,6}_fou{4,6}_exception
+#	Same as pmtu_ipv4_vxlan4, but using a generic UDP IPv4/IPv6
+#	encapsulation (GUE) over IPv4/IPv6, instead of VXLAN
+#
+# - pmtu_ipv{4,6}_ipv{4,6}_exception
+#	Same as pmtu_ipv4_vxlan4, but using a IPv4/IPv6 tunnel over IPv4/IPv6,
+#	instead of VXLAN
+#
+# - pmtu_vti4_exception
+#	Set up vti tunnel on top of veth, with xfrm states and policies, in two
+#	namespaces with matching endpoints. Check that route exception is not
+#	created if link layer MTU is not exceeded, then exceed it and check that
+#	exception is created with the expected PMTU. The approach described
+#	below for IPv6 doesn't apply here, because, on IPv4, administrative MTU
+#	changes alone won't affect PMTU
+#
+# - pmtu_vti6_exception
+#	Set up vti6 tunnel on top of veth, with xfrm states and policies, in two
+#	namespaces with matching endpoints. Check that route exception is
+#	created by exceeding link layer MTU with ping to other endpoint. Then
+#	decrease and increase MTU of tunnel, checking that route exception PMTU
+#	changes accordingly
+#
+# - pmtu_vti4_default_mtu
+#	Set up vti4 tunnel on top of veth, in two namespaces with matching
+#	endpoints. Check that MTU assigned to vti interface is the MTU of the
+#	lower layer (veth) minus additional lower layer headers (zero, for veth)
+#	minus IPv4 header length
+#
+# - pmtu_vti6_default_mtu
+#	Same as above, for IPv6
+#
+# - pmtu_vti4_link_add_mtu
+#	Set up vti4 interface passing MTU value at link creation, check MTU is
+#	configured, and that link is not created with invalid MTU values
+#
+# - pmtu_vti6_link_add_mtu
+#	Same as above, for IPv6
+#
+# - pmtu_vti6_link_change_mtu
+#	Set up two dummy interfaces with different MTUs, create a vti6 tunnel
+#	and check that configured MTU is used on link creation and changes, and
+#	that MTU is properly calculated instead when MTU is not configured from
+#	userspace
+#
+# - cleanup_ipv4_exception
+#	Similar to pmtu_ipv4_vxlan4_exception, but explicitly generate PMTU
+#	exceptions on multiple CPUs and check that the veth device tear-down
+# 	happens in a timely manner
+#
+# - cleanup_ipv6_exception
+#	Same as above, but use IPv6 transport from A to B
+#
+# - list_flush_ipv4_exception
+#	Using the same topology as in pmtu_ipv4, create exceptions, and check
+#	they are shown when listing exception caches, gone after flushing them
+#
+# - list_flush_ipv6_exception
+#	Using the same topology as in pmtu_ipv6, create exceptions, and check
+#	they are shown when listing exception caches, gone after flushing them
+#
+# - pmtu_ipv4_route_change
+#	Use the same topology as in pmtu_ipv4, but issue a route replacement
+#	command and delete the corresponding device afterward. This tests for
+#	proper cleanup of the PMTU exceptions by the route replacement path.
+#	Device unregistration should complete successfully
+#
+# - pmtu_ipv6_route_change
+#	Same as above but with IPv6
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+PAUSE_ON_FAIL=no
+VERBOSE=0
+TRACING=0
+
+# Some systems don't have a ping6 binary anymore
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+#               Name                          Description                  re-run with nh
+tests="
+	pmtu_ipv4_exception		ipv4: PMTU exceptions			1
+	pmtu_ipv6_exception		ipv6: PMTU exceptions			1
+	pmtu_ipv4_vxlan4_exception	IPv4 over vxlan4: PMTU exceptions	1
+	pmtu_ipv6_vxlan4_exception	IPv6 over vxlan4: PMTU exceptions	1
+	pmtu_ipv4_vxlan6_exception	IPv4 over vxlan6: PMTU exceptions	1
+	pmtu_ipv6_vxlan6_exception	IPv6 over vxlan6: PMTU exceptions	1
+	pmtu_ipv4_geneve4_exception	IPv4 over geneve4: PMTU exceptions	1
+	pmtu_ipv6_geneve4_exception	IPv6 over geneve4: PMTU exceptions	1
+	pmtu_ipv4_geneve6_exception	IPv4 over geneve6: PMTU exceptions	1
+	pmtu_ipv6_geneve6_exception	IPv6 over geneve6: PMTU exceptions	1
+	pmtu_ipv4_br_vxlan4_exception	IPv4, bridged vxlan4: PMTU exceptions	1
+	pmtu_ipv6_br_vxlan4_exception	IPv6, bridged vxlan4: PMTU exceptions	1
+	pmtu_ipv4_br_vxlan6_exception	IPv4, bridged vxlan6: PMTU exceptions	1
+	pmtu_ipv6_br_vxlan6_exception	IPv6, bridged vxlan6: PMTU exceptions	1
+	pmtu_ipv4_br_geneve4_exception	IPv4, bridged geneve4: PMTU exceptions	1
+	pmtu_ipv6_br_geneve4_exception	IPv6, bridged geneve4: PMTU exceptions	1
+	pmtu_ipv4_br_geneve6_exception	IPv4, bridged geneve6: PMTU exceptions	1
+	pmtu_ipv6_br_geneve6_exception	IPv6, bridged geneve6: PMTU exceptions	1
+	pmtu_ipv4_ovs_vxlan4_exception	IPv4, OVS vxlan4: PMTU exceptions	1
+	pmtu_ipv6_ovs_vxlan4_exception	IPv6, OVS vxlan4: PMTU exceptions	1
+	pmtu_ipv4_ovs_vxlan6_exception	IPv4, OVS vxlan6: PMTU exceptions	1
+	pmtu_ipv6_ovs_vxlan6_exception	IPv6, OVS vxlan6: PMTU exceptions	1
+	pmtu_ipv4_ovs_geneve4_exception	IPv4, OVS geneve4: PMTU exceptions	1
+	pmtu_ipv6_ovs_geneve4_exception	IPv6, OVS geneve4: PMTU exceptions	1
+	pmtu_ipv4_ovs_geneve6_exception	IPv4, OVS geneve6: PMTU exceptions	1
+	pmtu_ipv6_ovs_geneve6_exception	IPv6, OVS geneve6: PMTU exceptions	1
+	pmtu_ipv4_fou4_exception	IPv4 over fou4: PMTU exceptions		1
+	pmtu_ipv6_fou4_exception	IPv6 over fou4: PMTU exceptions		1
+	pmtu_ipv4_fou6_exception	IPv4 over fou6: PMTU exceptions		1
+	pmtu_ipv6_fou6_exception	IPv6 over fou6: PMTU exceptions		1
+	pmtu_ipv4_gue4_exception	IPv4 over gue4: PMTU exceptions		1
+	pmtu_ipv6_gue4_exception	IPv6 over gue4: PMTU exceptions		1
+	pmtu_ipv4_gue6_exception	IPv4 over gue6: PMTU exceptions		1
+	pmtu_ipv6_gue6_exception	IPv6 over gue6: PMTU exceptions		1
+	pmtu_ipv4_ipv4_exception	IPv4 over IPv4: PMTU exceptions		1
+	pmtu_ipv6_ipv4_exception	IPv6 over IPv4: PMTU exceptions		1
+	pmtu_ipv4_ipv6_exception	IPv4 over IPv6: PMTU exceptions		1
+	pmtu_ipv6_ipv6_exception	IPv6 over IPv6: PMTU exceptions		1
+	pmtu_vti6_exception		vti6: PMTU exceptions			0
+	pmtu_vti4_exception		vti4: PMTU exceptions			0
+	pmtu_vti4_default_mtu		vti4: default MTU assignment		0
+	pmtu_vti6_default_mtu		vti6: default MTU assignment		0
+	pmtu_vti4_link_add_mtu		vti4: MTU setting on link creation	0
+	pmtu_vti6_link_add_mtu		vti6: MTU setting on link creation	0
+	pmtu_vti6_link_change_mtu	vti6: MTU changes on link changes	0
+	cleanup_ipv4_exception		ipv4: cleanup of cached exceptions	1
+	cleanup_ipv6_exception		ipv6: cleanup of cached exceptions	1
+	list_flush_ipv4_exception	ipv4: list and flush cached exceptions	1
+	list_flush_ipv6_exception	ipv6: list and flush cached exceptions	1
+	pmtu_ipv4_route_change		ipv4: PMTU exception w/route replace	1
+	pmtu_ipv6_route_change		ipv6: PMTU exception w/route replace	1"
+
+NS_A="ns-A"
+NS_B="ns-B"
+NS_C="ns-C"
+NS_R1="ns-R1"
+NS_R2="ns-R2"
+ns_a="ip netns exec ${NS_A}"
+ns_b="ip netns exec ${NS_B}"
+ns_c="ip netns exec ${NS_C}"
+ns_r1="ip netns exec ${NS_R1}"
+ns_r2="ip netns exec ${NS_R2}"
+
+# Addressing and routing for tests with routers: four network segments, with
+# index SEGMENT between 1 and 4, a common prefix (PREFIX4 or PREFIX6) and an
+# identifier ID, which is 1 for hosts (A and B), 2 for routers (R1 and R2).
+# Addresses are:
+# - IPv4: PREFIX4.SEGMENT.ID (/24)
+# - IPv6: PREFIX6:SEGMENT::ID (/64)
+prefix4="10.0"
+prefix6="fc00"
+a_r1=1
+a_r2=2
+b_r1=3
+b_r2=4
+#	ns	peer	segment
+routing_addrs="
+	A	R1	${a_r1}
+	A	R2	${a_r2}
+	B	R1	${b_r1}
+	B	R2	${b_r2}
+"
+# Traffic from A to B goes through R1 by default, and through R2, if destined to
+# B's address on the b_r2 segment.
+# Traffic from B to A goes through R1.
+#	ns	destination		gateway
+routes="
+	A	default			${prefix4}.${a_r1}.2
+	A	${prefix4}.${b_r2}.1	${prefix4}.${a_r2}.2
+	B	default			${prefix4}.${b_r1}.2
+
+	A	default			${prefix6}:${a_r1}::2
+	A	${prefix6}:${b_r2}::1	${prefix6}:${a_r2}::2
+	B	default			${prefix6}:${b_r1}::2
+"
+
+USE_NH="no"
+#	ns	family	nh id	   destination		gateway
+nexthops="
+	A	4	41	${prefix4}.${a_r1}.2	veth_A-R1
+	A	4	42	${prefix4}.${a_r2}.2	veth_A-R2
+	B	4	41	${prefix4}.${b_r1}.2	veth_B-R1
+
+	A	6	61	${prefix6}:${a_r1}::2	veth_A-R1
+	A	6	62	${prefix6}:${a_r2}::2	veth_A-R2
+	B	6	61	${prefix6}:${b_r1}::2	veth_B-R1
+"
+
+# nexthop id correlates to id in nexthops config above
+#	ns    family	prefix			nh id
+routes_nh="
+	A	4	default			41
+	A	4	${prefix4}.${b_r2}.1	42
+	B	4	default			41
+
+	A	6	default			61
+	A	6	${prefix6}:${b_r2}::1	62
+	B	6	default			61
+"
+
+veth4_a_addr="192.168.1.1"
+veth4_b_addr="192.168.1.2"
+veth4_c_addr="192.168.2.10"
+veth4_mask="24"
+veth6_a_addr="fd00:1::a"
+veth6_b_addr="fd00:1::b"
+veth6_c_addr="fd00:2::c"
+veth6_mask="64"
+
+tunnel4_a_addr="192.168.2.1"
+tunnel4_b_addr="192.168.2.2"
+tunnel4_mask="24"
+tunnel6_a_addr="fd00:2::a"
+tunnel6_b_addr="fd00:2::b"
+tunnel6_mask="64"
+
+dummy6_0_prefix="fc00:1000::"
+dummy6_1_prefix="fc00:1001::"
+dummy6_mask="64"
+
+err_buf=
+tcpdump_pids=
+
+err() {
+	err_buf="${err_buf}${1}
+"
+}
+
+err_flush() {
+	echo -n "${err_buf}"
+	err_buf=
+}
+
+run_cmd() {
+	cmd="$*"
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "    COMMAND: $cmd\n"
+	fi
+
+	out="$($cmd 2>&1)"
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+		echo
+	fi
+
+	return $rc
+}
+
+# Find the auto-generated name for this namespace
+nsname() {
+	eval echo \$NS_$1
+}
+
+setup_fou_or_gue() {
+	outer="${1}"
+	inner="${2}"
+	encap="${3}"
+
+	if [ "${outer}" = "4" ]; then
+		modprobe fou || return 2
+		a_addr="${prefix4}.${a_r1}.1"
+		b_addr="${prefix4}.${b_r1}.1"
+		if [ "${inner}" = "4" ]; then
+			type="ipip"
+			ipproto="4"
+		else
+			type="sit"
+			ipproto="41"
+		fi
+	else
+		modprobe fou6 || return 2
+		a_addr="${prefix6}:${a_r1}::1"
+		b_addr="${prefix6}:${b_r1}::1"
+		if [ "${inner}" = "4" ]; then
+			type="ip6tnl"
+			mode="mode ipip6"
+			ipproto="4 -6"
+		else
+			type="ip6tnl"
+			mode="mode ip6ip6"
+			ipproto="41 -6"
+		fi
+	fi
+
+	run_cmd ${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2
+	run_cmd ${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2
+
+	run_cmd ${ns_b} ip fou add port 5556 ipproto ${ipproto}
+	run_cmd ${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555
+
+	if [ "${inner}" = "4" ]; then
+		run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a
+		run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b
+	else
+		run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a
+		run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b
+	fi
+
+	run_cmd ${ns_a} ip link set ${encap}_a up
+	run_cmd ${ns_b} ip link set ${encap}_b up
+}
+
+setup_fou44() {
+	setup_fou_or_gue 4 4 fou
+}
+
+setup_fou46() {
+	setup_fou_or_gue 4 6 fou
+}
+
+setup_fou64() {
+	setup_fou_or_gue 6 4 fou
+}
+
+setup_fou66() {
+	setup_fou_or_gue 6 6 fou
+}
+
+setup_gue44() {
+	setup_fou_or_gue 4 4 gue
+}
+
+setup_gue46() {
+	setup_fou_or_gue 4 6 gue
+}
+
+setup_gue64() {
+	setup_fou_or_gue 6 4 gue
+}
+
+setup_gue66() {
+	setup_fou_or_gue 6 6 gue
+}
+
+setup_ipvX_over_ipvY() {
+	inner=${1}
+	outer=${2}
+
+	if [ "${outer}" -eq 4 ]; then
+		a_addr="${prefix4}.${a_r1}.1"
+		b_addr="${prefix4}.${b_r1}.1"
+		if [ "${inner}" -eq 4 ]; then
+			type="ipip"
+			mode="ipip"
+		else
+			type="sit"
+			mode="ip6ip"
+		fi
+	else
+		a_addr="${prefix6}:${a_r1}::1"
+		b_addr="${prefix6}:${b_r1}::1"
+		type="ip6tnl"
+		if [ "${inner}" -eq 4 ]; then
+			mode="ipip6"
+		else
+			mode="ip6ip6"
+		fi
+	fi
+
+	run_cmd ${ns_a} ip link add ip_a type ${type} local ${a_addr} remote ${b_addr} mode ${mode} || return 2
+	run_cmd ${ns_b} ip link add ip_b type ${type} local ${b_addr} remote ${a_addr} mode ${mode}
+
+	run_cmd ${ns_a} ip link set ip_a up
+	run_cmd ${ns_b} ip link set ip_b up
+
+	if [ "${inner}" = "4" ]; then
+		run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ip_a
+		run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ip_b
+	else
+		run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ip_a
+		run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ip_b
+	fi
+}
+
+setup_ip4ip4() {
+	setup_ipvX_over_ipvY 4 4
+}
+
+setup_ip6ip4() {
+	setup_ipvX_over_ipvY 6 4
+}
+
+setup_ip4ip6() {
+	setup_ipvX_over_ipvY 4 6
+}
+
+setup_ip6ip6() {
+	setup_ipvX_over_ipvY 6 6
+}
+
+setup_namespaces() {
+	for n in ${NS_A} ${NS_B} ${NS_C} ${NS_R1} ${NS_R2}; do
+		ip netns add ${n} || return 1
+
+		# Disable DAD, so that we don't have to wait to use the
+		# configured IPv6 addresses
+		ip netns exec ${n} sysctl -q net/ipv6/conf/default/accept_dad=0
+	done
+}
+
+setup_veth() {
+	run_cmd ${ns_a} ip link add veth_a type veth peer name veth_b || return 1
+	run_cmd ${ns_a} ip link set veth_b netns ${NS_B}
+
+	run_cmd ${ns_a} ip addr add ${veth4_a_addr}/${veth4_mask} dev veth_a
+	run_cmd ${ns_b} ip addr add ${veth4_b_addr}/${veth4_mask} dev veth_b
+
+	run_cmd ${ns_a} ip addr add ${veth6_a_addr}/${veth6_mask} dev veth_a
+	run_cmd ${ns_b} ip addr add ${veth6_b_addr}/${veth6_mask} dev veth_b
+
+	run_cmd ${ns_a} ip link set veth_a up
+	run_cmd ${ns_b} ip link set veth_b up
+}
+
+setup_vti() {
+	proto=${1}
+	veth_a_addr="${2}"
+	veth_b_addr="${3}"
+	vti_a_addr="${4}"
+	vti_b_addr="${5}"
+	vti_mask=${6}
+
+	[ ${proto} -eq 6 ] && vti_type="vti6" || vti_type="vti"
+
+	run_cmd ${ns_a} ip link add vti${proto}_a type ${vti_type} local ${veth_a_addr} remote ${veth_b_addr} key 10 || return 1
+	run_cmd ${ns_b} ip link add vti${proto}_b type ${vti_type} local ${veth_b_addr} remote ${veth_a_addr} key 10
+
+	run_cmd ${ns_a} ip addr add ${vti_a_addr}/${vti_mask} dev vti${proto}_a
+	run_cmd ${ns_b} ip addr add ${vti_b_addr}/${vti_mask} dev vti${proto}_b
+
+	run_cmd ${ns_a} ip link set vti${proto}_a up
+	run_cmd ${ns_b} ip link set vti${proto}_b up
+}
+
+setup_vti4() {
+	setup_vti 4 ${veth4_a_addr} ${veth4_b_addr} ${tunnel4_a_addr} ${tunnel4_b_addr} ${tunnel4_mask}
+}
+
+setup_vti6() {
+	setup_vti 6 ${veth6_a_addr} ${veth6_b_addr} ${tunnel6_a_addr} ${tunnel6_b_addr} ${tunnel6_mask}
+}
+
+setup_vxlan_or_geneve() {
+	type="${1}"
+	a_addr="${2}"
+	b_addr="${3}"
+	opts="${4}"
+	br_if_a="${5}"
+
+	if [ "${type}" = "vxlan" ]; then
+		opts="${opts} ttl 64 dstport 4789"
+		opts_a="local ${a_addr}"
+		opts_b="local ${b_addr}"
+	else
+		opts_a=""
+		opts_b=""
+	fi
+
+	run_cmd ${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1
+	run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts}
+
+	if [ -n "${br_if_a}" ]; then
+		run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${br_if_a}
+		run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${br_if_a}
+		run_cmd ${ns_a} ip link set ${type}_a master ${br_if_a}
+	else
+		run_cmd ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a
+		run_cmd ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a
+	fi
+
+	run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
+	run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
+
+	run_cmd ${ns_a} ip link set ${type}_a up
+	run_cmd ${ns_b} ip link set ${type}_b up
+}
+
+setup_geneve4() {
+	setup_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1  ${prefix4}.${b_r1}.1  "df set"
+}
+
+setup_vxlan4() {
+	setup_vxlan_or_geneve vxlan  ${prefix4}.${a_r1}.1  ${prefix4}.${b_r1}.1  "df set"
+}
+
+setup_geneve6() {
+	setup_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 ""
+}
+
+setup_vxlan6() {
+	setup_vxlan_or_geneve vxlan  ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 ""
+}
+
+setup_bridged_geneve4() {
+	setup_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1  ${prefix4}.${b_r1}.1  "df set" "br0"
+}
+
+setup_bridged_vxlan4() {
+	setup_vxlan_or_geneve vxlan  ${prefix4}.${a_r1}.1  ${prefix4}.${b_r1}.1  "df set" "br0"
+}
+
+setup_bridged_geneve6() {
+	setup_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 "" "br0"
+}
+
+setup_bridged_vxlan6() {
+	setup_vxlan_or_geneve vxlan  ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 "" "br0"
+}
+
+setup_xfrm() {
+	proto=${1}
+	veth_a_addr="${2}"
+	veth_b_addr="${3}"
+
+	run_cmd ${ns_a} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel || return 1
+	run_cmd ${ns_a} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
+	run_cmd ${ns_a} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel
+	run_cmd ${ns_a} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel
+
+	run_cmd ${ns_b} ip -${proto} xfrm state add src ${veth_a_addr} dst ${veth_b_addr} spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
+	run_cmd ${ns_b} ip -${proto} xfrm state add src ${veth_b_addr} dst ${veth_a_addr} spi 0x1001 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
+	run_cmd ${ns_b} ip -${proto} xfrm policy add dir out mark 10 tmpl src ${veth_b_addr} dst ${veth_a_addr} proto esp mode tunnel
+	run_cmd ${ns_b} ip -${proto} xfrm policy add dir in mark 10 tmpl src ${veth_a_addr} dst ${veth_b_addr} proto esp mode tunnel
+}
+
+setup_xfrm4() {
+	setup_xfrm 4 ${veth4_a_addr} ${veth4_b_addr}
+}
+
+setup_xfrm6() {
+	setup_xfrm 6 ${veth6_a_addr} ${veth6_b_addr}
+}
+
+setup_routing_old() {
+	for i in ${routes}; do
+		[ "${ns}" = "" ]	&& ns="${i}"		&& continue
+		[ "${addr}" = "" ]	&& addr="${i}"		&& continue
+		[ "${gw}" = "" ]	&& gw="${i}"
+
+		ns_name="$(nsname ${ns})"
+
+		ip -n ${ns_name} route add ${addr} via ${gw}
+
+		ns=""; addr=""; gw=""
+	done
+}
+
+setup_routing_new() {
+	for i in ${nexthops}; do
+		[ "${ns}" = "" ]	&& ns="${i}"		&& continue
+		[ "${fam}" = "" ]	&& fam="${i}"		&& continue
+		[ "${nhid}" = "" ]	&& nhid="${i}"		&& continue
+		[ "${gw}" = "" ]	&& gw="${i}"		&& continue
+		[ "${dev}" = "" ]	&& dev="${i}"
+
+		ns_name="$(nsname ${ns})"
+
+		ip -n ${ns_name} -${fam} nexthop add id ${nhid} via ${gw} dev ${dev}
+
+		ns=""; fam=""; nhid=""; gw=""; dev=""
+
+	done
+
+	for i in ${routes_nh}; do
+		[ "${ns}" = "" ]	&& ns="${i}"		&& continue
+		[ "${fam}" = "" ]	&& fam="${i}"		&& continue
+		[ "${addr}" = "" ]	&& addr="${i}"		&& continue
+		[ "${nhid}" = "" ]	&& nhid="${i}"
+
+		ns_name="$(nsname ${ns})"
+
+		ip -n ${ns_name} -${fam} route add ${addr} nhid ${nhid}
+
+		ns=""; fam=""; addr=""; nhid=""
+	done
+}
+
+setup_routing() {
+	for i in ${NS_R1} ${NS_R2}; do
+		ip netns exec ${i} sysctl -q net/ipv4/ip_forward=1
+		ip netns exec ${i} sysctl -q net/ipv6/conf/all/forwarding=1
+	done
+
+	for i in ${routing_addrs}; do
+		[ "${ns}" = "" ]	&& ns="${i}"		&& continue
+		[ "${peer}" = "" ]	&& peer="${i}"		&& continue
+		[ "${segment}" = "" ]	&& segment="${i}"
+
+		ns_name="$(nsname ${ns})"
+		peer_name="$(nsname ${peer})"
+		if="veth_${ns}-${peer}"
+		ifpeer="veth_${peer}-${ns}"
+
+		# Create veth links
+		ip link add ${if} up netns ${ns_name} type veth peer name ${ifpeer} netns ${peer_name} || return 1
+		ip -n ${peer_name} link set dev ${ifpeer} up
+
+		# Add addresses
+		ip -n ${ns_name}   addr add ${prefix4}.${segment}.1/24  dev ${if}
+		ip -n ${ns_name}   addr add ${prefix6}:${segment}::1/64 dev ${if}
+
+		ip -n ${peer_name} addr add ${prefix4}.${segment}.2/24  dev ${ifpeer}
+		ip -n ${peer_name} addr add ${prefix6}:${segment}::2/64 dev ${ifpeer}
+
+		ns=""; peer=""; segment=""
+	done
+
+	if [ "$USE_NH" = "yes" ]; then
+		setup_routing_new
+	else
+		setup_routing_old
+	fi
+
+	return 0
+}
+
+setup_bridge() {
+	run_cmd ${ns_a} ip link add br0 type bridge || return 2
+	run_cmd ${ns_a} ip link set br0 up
+
+	run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C
+	run_cmd ${ns_c} ip link set veth_A-C netns ns-A
+
+	run_cmd ${ns_a} ip link set veth_A-C up
+	run_cmd ${ns_c} ip link set veth_C-A up
+	run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A
+	run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A
+	run_cmd ${ns_a} ip link set veth_A-C master br0
+}
+
+setup_ovs_vxlan_or_geneve() {
+	type="${1}"
+	a_addr="${2}"
+	b_addr="${3}"
+
+	if [ "${type}" = "vxlan" ]; then
+		opts="${opts} ttl 64 dstport 4789"
+		opts_b="local ${b_addr}"
+	fi
+
+	run_cmd ovs-vsctl add-port ovs_br0 ${type}_a -- \
+		set interface ${type}_a type=${type} \
+		options:remote_ip=${b_addr} options:key=1 options:csum=true || return 1
+
+	run_cmd ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} || return 1
+
+	run_cmd ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
+	run_cmd ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
+
+	run_cmd ${ns_b} ip link set ${type}_b up
+}
+
+setup_ovs_geneve4() {
+	setup_ovs_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1  ${prefix4}.${b_r1}.1
+}
+
+setup_ovs_vxlan4() {
+	setup_ovs_vxlan_or_geneve vxlan  ${prefix4}.${a_r1}.1  ${prefix4}.${b_r1}.1
+}
+
+setup_ovs_geneve6() {
+	setup_ovs_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
+}
+
+setup_ovs_vxlan6() {
+	setup_ovs_vxlan_or_geneve vxlan  ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
+}
+
+setup_ovs_bridge() {
+	run_cmd ovs-vsctl add-br ovs_br0 || return 2
+	run_cmd ip link set ovs_br0 up
+
+	run_cmd ${ns_c} ip link add veth_C-A type veth peer name veth_A-C
+	run_cmd ${ns_c} ip link set veth_A-C netns 1
+
+	run_cmd         ip link set veth_A-C up
+	run_cmd ${ns_c} ip link set veth_C-A up
+	run_cmd ${ns_c} ip addr add ${veth4_c_addr}/${veth4_mask} dev veth_C-A
+	run_cmd ${ns_c} ip addr add ${veth6_c_addr}/${veth6_mask} dev veth_C-A
+	run_cmd ovs-vsctl add-port ovs_br0 veth_A-C
+
+	# Move veth_A-R1 to init
+	run_cmd ${ns_a} ip link set veth_A-R1 netns 1
+	run_cmd ip addr add ${prefix4}.${a_r1}.1/${veth4_mask} dev veth_A-R1
+	run_cmd ip addr add ${prefix6}:${a_r1}::1/${veth6_mask} dev veth_A-R1
+	run_cmd ip link set veth_A-R1 up
+	run_cmd ip route add ${prefix4}.${b_r1}.1 via ${prefix4}.${a_r1}.2
+	run_cmd ip route add ${prefix6}:${b_r1}::1 via ${prefix6}:${a_r1}::2
+}
+
+setup() {
+	[ "$(id -u)" -ne 0 ] && echo "  need to run as root" && return $ksft_skip
+
+	for arg do
+		eval setup_${arg} || { echo "  ${arg} not supported"; return 1; }
+	done
+}
+
+trace() {
+	[ $TRACING -eq 0 ] && return
+
+	for arg do
+		[ "${ns_cmd}" = "" ] && ns_cmd="${arg}" && continue
+		${ns_cmd} tcpdump --immediate-mode -s 0 -i "${arg}" -w "${name}_${arg}.pcap" 2> /dev/null &
+		tcpdump_pids="${tcpdump_pids} $!"
+		ns_cmd=
+	done
+	sleep 1
+}
+
+cleanup() {
+	for pid in ${tcpdump_pids}; do
+		kill ${pid}
+	done
+	tcpdump_pids=
+
+	for n in ${NS_A} ${NS_B} ${NS_C} ${NS_R1} ${NS_R2}; do
+		ip netns del ${n} 2> /dev/null
+	done
+
+	ip link del veth_A-C			2>/dev/null
+	ip link del veth_A-R1			2>/dev/null
+	ovs-vsctl --if-exists del-port vxlan_a	2>/dev/null
+	ovs-vsctl --if-exists del-br ovs_br0	2>/dev/null
+}
+
+mtu() {
+	ns_cmd="${1}"
+	dev="${2}"
+	mtu="${3}"
+
+	${ns_cmd} ip link set dev ${dev} mtu ${mtu}
+}
+
+mtu_parse() {
+	input="${1}"
+
+	next=0
+	for i in ${input}; do
+		[ ${next} -eq 1 -a "${i}" = "lock" ] && next=2 && continue
+		[ ${next} -eq 1 ] && echo "${i}" && return
+		[ ${next} -eq 2 ] && echo "lock ${i}" && return
+		[ "${i}" = "mtu" ] && next=1
+	done
+}
+
+link_get() {
+	ns_cmd="${1}"
+	name="${2}"
+
+	${ns_cmd} ip link show dev "${name}"
+}
+
+link_get_mtu() {
+	ns_cmd="${1}"
+	name="${2}"
+
+	mtu_parse "$(link_get "${ns_cmd}" ${name})"
+}
+
+route_get_dst_exception() {
+	ns_cmd="${1}"
+	dst="${2}"
+
+	${ns_cmd} ip route get "${dst}"
+}
+
+route_get_dst_pmtu_from_exception() {
+	ns_cmd="${1}"
+	dst="${2}"
+
+	mtu_parse "$(route_get_dst_exception "${ns_cmd}" ${dst})"
+}
+
+check_pmtu_value() {
+	expected="${1}"
+	value="${2}"
+	event="${3}"
+
+	[ "${expected}" = "any" ] && [ -n "${value}" ] && return 0
+	[ "${value}" = "${expected}" ] && return 0
+	[ -z "${value}" ] &&    err "  PMTU exception wasn't created after ${event}" && return 1
+	[ -z "${expected}" ] && err "  PMTU exception shouldn't exist after ${event}" && return 1
+	err "  found PMTU exception with incorrect MTU ${value}, expected ${expected}, after ${event}"
+	return 1
+}
+
+test_pmtu_ipvX() {
+	family=${1}
+
+	setup namespaces routing || return 2
+	trace "${ns_a}"  veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_r1}" veth_R1-B    "${ns_b}"  veth_B-R1 \
+	      "${ns_a}"  veth_A-R2    "${ns_r2}" veth_R2-A \
+	      "${ns_r2}" veth_R2-B    "${ns_b}"  veth_B-R2
+
+	if [ ${family} -eq 4 ]; then
+		ping=ping
+		dst1="${prefix4}.${b_r1}.1"
+		dst2="${prefix4}.${b_r2}.1"
+	else
+		ping=${ping6}
+		dst1="${prefix6}:${b_r1}::1"
+		dst2="${prefix6}:${b_r2}::1"
+	fi
+
+	# Set up initial MTU values
+	mtu "${ns_a}"  veth_A-R1 2000
+	mtu "${ns_r1}" veth_R1-A 2000
+	mtu "${ns_r1}" veth_R1-B 1400
+	mtu "${ns_b}"  veth_B-R1 1400
+
+	mtu "${ns_a}"  veth_A-R2 2000
+	mtu "${ns_r2}" veth_R2-A 2000
+	mtu "${ns_r2}" veth_R2-B 1500
+	mtu "${ns_b}"  veth_B-R2 1500
+
+	# Create route exceptions
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1}
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2}
+
+	# Check that exceptions have been created with the correct PMTU
+	pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
+	check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1
+
+	# Decrease local MTU below PMTU, check for PMTU decrease in route exception
+	mtu "${ns_a}"  veth_A-R1 1300
+	mtu "${ns_r1}" veth_R1-A 1300
+	pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
+	check_pmtu_value "1300" "${pmtu_1}" "decreasing local MTU" || return 1
+	# Second exception shouldn't be modified
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "1500" "${pmtu_2}" "changing local MTU on a link not on this path" || return 1
+
+	# Increase MTU, check for PMTU increase in route exception
+	mtu "${ns_a}"  veth_A-R1 1700
+	mtu "${ns_r1}" veth_R1-A 1700
+	pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
+	check_pmtu_value "1700" "${pmtu_1}" "increasing local MTU" || return 1
+	# Second exception shouldn't be modified
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "1500" "${pmtu_2}" "changing local MTU on a link not on this path" || return 1
+
+	# Skip PMTU locking tests for IPv6
+	[ $family -eq 6 ] && return 0
+
+	# Decrease remote MTU on path via R2, get new exception
+	mtu "${ns_r2}" veth_R2-B 400
+	mtu "${ns_b}"  veth_B-R2 400
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2}
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1
+
+	# Decrease local MTU below PMTU
+	mtu "${ns_a}"  veth_A-R2 500
+	mtu "${ns_r2}" veth_R2-A 500
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "500" "${pmtu_2}" "decreasing local MTU" || return 1
+
+	# Increase local MTU
+	mtu "${ns_a}"  veth_A-R2 1500
+	mtu "${ns_r2}" veth_R2-A 1500
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "1500" "${pmtu_2}" "increasing local MTU" || return 1
+
+	# Get new exception
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2}
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1
+}
+
+test_pmtu_ipv4_exception() {
+	test_pmtu_ipvX 4
+}
+
+test_pmtu_ipv6_exception() {
+	test_pmtu_ipvX 6
+}
+
+test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() {
+	type=${1}
+	family=${2}
+	outer_family=${3}
+	ll_mtu=4000
+
+	if [ ${outer_family} -eq 4 ]; then
+		setup namespaces routing ${type}4 || return 2
+		#                      IPv4 header   UDP header   VXLAN/GENEVE header   Ethernet header
+		exp_mtu=$((${ll_mtu} - 20          - 8          - 8                   - 14))
+	else
+		setup namespaces routing ${type}6 || return 2
+		#                      IPv6 header   UDP header   VXLAN/GENEVE header   Ethernet header
+		exp_mtu=$((${ll_mtu} - 40          - 8          - 8                   - 14))
+	fi
+
+	trace "${ns_a}" ${type}_a    "${ns_b}"  ${type}_b \
+	      "${ns_a}" veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B
+
+	if [ ${family} -eq 4 ]; then
+		ping=ping
+		dst=${tunnel4_b_addr}
+	else
+		ping=${ping6}
+		dst=${tunnel6_b_addr}
+	fi
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}"  veth_A-R1 $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000))
+	mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst}
+
+	# Check that exception was created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${type} interface"
+}
+
+test_pmtu_ipv4_vxlan4_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan  4 4
+}
+
+test_pmtu_ipv6_vxlan4_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan  6 4
+}
+
+test_pmtu_ipv4_geneve4_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 4
+}
+
+test_pmtu_ipv6_geneve4_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 4
+}
+
+test_pmtu_ipv4_vxlan6_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan  4 6
+}
+
+test_pmtu_ipv6_vxlan6_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan  6 6
+}
+
+test_pmtu_ipv4_geneve6_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 6
+}
+
+test_pmtu_ipv6_geneve6_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 6
+}
+
+test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception() {
+	type=${1}
+	family=${2}
+	outer_family=${3}
+	ll_mtu=4000
+
+	if [ ${outer_family} -eq 4 ]; then
+		setup namespaces routing bridge bridged_${type}4 || return 2
+		#                      IPv4 header   UDP header   VXLAN/GENEVE header   Ethernet header
+		exp_mtu=$((${ll_mtu} - 20          - 8          - 8                   - 14))
+	else
+		setup namespaces routing bridge bridged_${type}6 || return 2
+		#                      IPv6 header   UDP header   VXLAN/GENEVE header   Ethernet header
+		exp_mtu=$((${ll_mtu} - 40          - 8          - 8                   - 14))
+	fi
+
+	trace "${ns_a}" ${type}_a    "${ns_b}"  ${type}_b \
+	      "${ns_a}" veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B \
+	      "${ns_a}" br0          "${ns_a}"  veth-A-C  \
+	      "${ns_c}" veth_C-A
+
+	if [ ${family} -eq 4 ]; then
+		ping=ping
+		dst=${tunnel4_b_addr}
+	else
+		ping=${ping6}
+		dst=${tunnel6_b_addr}
+	fi
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}"  veth_A-R1 $((${ll_mtu} + 1000))
+	mtu "${ns_a}"  br0       $((${ll_mtu} + 1000))
+	mtu "${ns_a}"  veth_A-C  $((${ll_mtu} + 1000))
+	mtu "${ns_c}"  veth_C-A  $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000))
+	mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
+
+	run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 10 -s $((${ll_mtu} + 500)) ${dst} || return 1
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1  -s $((${ll_mtu} + 500)) ${dst} || return 1
+
+	# Check that exceptions were created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_c}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on bridged ${type} interface"
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on locally bridged ${type} interface"
+}
+
+test_pmtu_ipv4_br_vxlan4_exception() {
+	test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception vxlan  4 4
+}
+
+test_pmtu_ipv6_br_vxlan4_exception() {
+	test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception vxlan  6 4
+}
+
+test_pmtu_ipv4_br_geneve4_exception() {
+	test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception geneve 4 4
+}
+
+test_pmtu_ipv6_br_geneve4_exception() {
+	test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception geneve 6 4
+}
+
+test_pmtu_ipv4_br_vxlan6_exception() {
+	test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception vxlan  4 6
+}
+
+test_pmtu_ipv6_br_vxlan6_exception() {
+	test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception vxlan  6 6
+}
+
+test_pmtu_ipv4_br_geneve6_exception() {
+	test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception geneve 4 6
+}
+
+test_pmtu_ipv6_br_geneve6_exception() {
+	test_pmtu_ipvX_over_bridged_vxlanY_or_geneveY_exception geneve 6 6
+}
+
+test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception() {
+	type=${1}
+	family=${2}
+	outer_family=${3}
+	ll_mtu=4000
+
+	if [ ${outer_family} -eq 4 ]; then
+		setup namespaces routing ovs_bridge ovs_${type}4 || return 2
+		#                      IPv4 header   UDP header   VXLAN/GENEVE header   Ethernet header
+		exp_mtu=$((${ll_mtu} - 20          - 8          - 8                   - 14))
+	else
+		setup namespaces routing ovs_bridge ovs_${type}6 || return 2
+		#                      IPv6 header   UDP header   VXLAN/GENEVE header   Ethernet header
+		exp_mtu=$((${ll_mtu} - 40          - 8          - 8                   - 14))
+	fi
+
+	if [ "${type}" = "vxlan" ]; then
+		tun_a="vxlan_sys_4789"
+	elif [ "${type}" = "geneve" ]; then
+		tun_a="genev_sys_6081"
+	fi
+
+	trace ""        "${tun_a}"  "${ns_b}"  ${type}_b \
+	      ""        veth_A-R1   "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1   "${ns_r1}" veth_R1-B \
+	      ""        ovs_br0     ""         veth-A-C  \
+	      "${ns_c}" veth_C-A
+
+	if [ ${family} -eq 4 ]; then
+		ping=ping
+		dst=${tunnel4_b_addr}
+	else
+		ping=${ping6}
+		dst=${tunnel6_b_addr}
+	fi
+
+	# Create route exception by exceeding link layer MTU
+	mtu ""         veth_A-R1 $((${ll_mtu} + 1000))
+	mtu ""         ovs_br0   $((${ll_mtu} + 1000))
+	mtu ""         veth_A-C  $((${ll_mtu} + 1000))
+	mtu "${ns_c}"  veth_C-A  $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu ""        ${tun_a}  $((${ll_mtu} + 1000))
+	mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
+
+	run_cmd ${ns_c} ${ping} -q -M want -i 0.1 -c 20 -s $((${ll_mtu} + 500)) ${dst} || return 1
+
+	# Check that exceptions were created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_c}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on Open vSwitch ${type} interface"
+}
+
+test_pmtu_ipv4_ovs_vxlan4_exception() {
+	test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception vxlan  4 4
+}
+
+test_pmtu_ipv6_ovs_vxlan4_exception() {
+	test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception vxlan  6 4
+}
+
+test_pmtu_ipv4_ovs_geneve4_exception() {
+	test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception geneve 4 4
+}
+
+test_pmtu_ipv6_ovs_geneve4_exception() {
+	test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception geneve 6 4
+}
+
+test_pmtu_ipv4_ovs_vxlan6_exception() {
+	test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception vxlan  4 6
+}
+
+test_pmtu_ipv6_ovs_vxlan6_exception() {
+	test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception vxlan  6 6
+}
+
+test_pmtu_ipv4_ovs_geneve6_exception() {
+	test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception geneve 4 6
+}
+
+test_pmtu_ipv6_ovs_geneve6_exception() {
+	test_pmtu_ipvX_over_ovs_vxlanY_or_geneveY_exception geneve 6 6
+}
+
+test_pmtu_ipvX_over_fouY_or_gueY() {
+	inner_family=${1}
+	outer_family=${2}
+	encap=${3}
+	ll_mtu=4000
+
+	setup namespaces routing ${encap}${outer_family}${inner_family} || return 2
+	trace "${ns_a}" ${encap}_a   "${ns_b}"  ${encap}_b \
+	      "${ns_a}" veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B
+
+	if [ ${inner_family} -eq 4 ]; then
+		ping=ping
+		dst=${tunnel4_b_addr}
+	else
+		ping=${ping6}
+		dst=${tunnel6_b_addr}
+	fi
+
+	if [ "${encap}" = "gue" ]; then
+		encap_overhead=4
+	else
+		encap_overhead=0
+	fi
+
+	if [ ${outer_family} -eq 4 ]; then
+		#                      IPv4 header   UDP header
+		exp_mtu=$((${ll_mtu} - 20          - 8         - ${encap_overhead}))
+	else
+		#                      IPv6 header   Option 4   UDP header
+		exp_mtu=$((${ll_mtu} - 40          - 8        - 8       - ${encap_overhead}))
+	fi
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}"  veth_A-R1 $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
+	mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst}
+
+	# Check that exception was created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${encap} interface"
+}
+
+test_pmtu_ipv4_fou4_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 4 4 fou
+}
+
+test_pmtu_ipv6_fou4_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 6 4 fou
+}
+
+test_pmtu_ipv4_fou6_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 4 6 fou
+}
+
+test_pmtu_ipv6_fou6_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 6 6 fou
+}
+
+test_pmtu_ipv4_gue4_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 4 4 gue
+}
+
+test_pmtu_ipv6_gue4_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 6 4 gue
+}
+
+test_pmtu_ipv4_gue6_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 4 6 gue
+}
+
+test_pmtu_ipv6_gue6_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 6 6 gue
+}
+
+test_pmtu_ipvX_over_ipvY_exception() {
+	inner=${1}
+	outer=${2}
+	ll_mtu=4000
+
+	setup namespaces routing ip${inner}ip${outer} || return 2
+
+	trace "${ns_a}" ip_a         "${ns_b}"  ip_b  \
+	      "${ns_a}" veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B
+
+	if [ ${inner} -eq 4 ]; then
+		ping=ping
+		dst=${tunnel4_b_addr}
+	else
+		ping=${ping6}
+		dst=${tunnel6_b_addr}
+	fi
+
+	if [ ${outer} -eq 4 ]; then
+		#                      IPv4 header
+		exp_mtu=$((${ll_mtu} - 20))
+	else
+		#                      IPv6 header   Option 4
+		exp_mtu=$((${ll_mtu} - 40          - 8))
+	fi
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}"  veth_A-R1 $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu "${ns_a}" ip_a $((${ll_mtu} + 1000)) || return
+	mtu "${ns_b}" ip_b $((${ll_mtu} + 1000)) || return
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst}
+
+	# Check that exception was created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ip${inner}ip${outer} interface"
+}
+
+test_pmtu_ipv4_ipv4_exception() {
+	test_pmtu_ipvX_over_ipvY_exception 4 4
+}
+
+test_pmtu_ipv6_ipv4_exception() {
+	test_pmtu_ipvX_over_ipvY_exception 6 4
+}
+
+test_pmtu_ipv4_ipv6_exception() {
+	test_pmtu_ipvX_over_ipvY_exception 4 6
+}
+
+test_pmtu_ipv6_ipv6_exception() {
+	test_pmtu_ipvX_over_ipvY_exception 6 6
+}
+
+test_pmtu_vti4_exception() {
+	setup namespaces veth vti4 xfrm4 || return 2
+	trace "${ns_a}" veth_a    "${ns_b}" veth_b \
+	      "${ns_a}" vti4_a    "${ns_b}" vti4_b
+
+	veth_mtu=1500
+	vti_mtu=$((veth_mtu - 20))
+
+	#                                SPI   SN   IV  ICV   pad length   next header
+	esp_payload_rfc4106=$((vti_mtu - 4   - 4  - 8 - 16  - 1          - 1))
+	ping_payload=$((esp_payload_rfc4106 - 28))
+
+	mtu "${ns_a}" veth_a ${veth_mtu}
+	mtu "${ns_b}" veth_b ${veth_mtu}
+	mtu "${ns_a}" vti4_a ${vti_mtu}
+	mtu "${ns_b}" vti4_b ${vti_mtu}
+
+	# Send DF packet without exceeding link layer MTU, check that no
+	# exception is created
+	run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr}
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
+	check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1
+
+	# Now exceed link layer MTU by one byte, check that exception is created
+	# with the right PMTU value
+	run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr}
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
+	check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))"
+}
+
+test_pmtu_vti6_exception() {
+	setup namespaces veth vti6 xfrm6 || return 2
+	trace "${ns_a}" veth_a    "${ns_b}" veth_b \
+	      "${ns_a}" vti6_a    "${ns_b}" vti6_b
+	fail=0
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}" veth_a 4000
+	mtu "${ns_b}" veth_b 4000
+	mtu "${ns_a}" vti6_a 5000
+	mtu "${ns_b}" vti6_b 5000
+	run_cmd ${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr}
+
+	# Check that exception was created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
+	check_pmtu_value any "${pmtu}" "creating tunnel exceeding link layer MTU" || return 1
+
+	# Decrease tunnel MTU, check for PMTU decrease in route exception
+	mtu "${ns_a}" vti6_a 3000
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
+	check_pmtu_value "3000" "${pmtu}" "decreasing tunnel MTU" || fail=1
+
+	# Increase tunnel MTU, check for PMTU increase in route exception
+	mtu "${ns_a}" vti6_a 9000
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
+	check_pmtu_value "9000" "${pmtu}" "increasing tunnel MTU" || fail=1
+
+	return ${fail}
+}
+
+test_pmtu_vti4_default_mtu() {
+	setup namespaces veth vti4 || return 2
+
+	# Check that MTU of vti device is MTU of veth minus IPv4 header length
+	veth_mtu="$(link_get_mtu "${ns_a}" veth_a)"
+	vti4_mtu="$(link_get_mtu "${ns_a}" vti4_a)"
+	if [ $((veth_mtu - vti4_mtu)) -ne 20 ]; then
+		err "  vti MTU ${vti4_mtu} is not veth MTU ${veth_mtu} minus IPv4 header length"
+		return 1
+	fi
+}
+
+test_pmtu_vti6_default_mtu() {
+	setup namespaces veth vti6 || return 2
+
+	# Check that MTU of vti device is MTU of veth minus IPv6 header length
+	veth_mtu="$(link_get_mtu "${ns_a}" veth_a)"
+	vti6_mtu="$(link_get_mtu "${ns_a}" vti6_a)"
+	if [ $((veth_mtu - vti6_mtu)) -ne 40 ]; then
+		err "  vti MTU ${vti6_mtu} is not veth MTU ${veth_mtu} minus IPv6 header length"
+		return 1
+	fi
+}
+
+test_pmtu_vti4_link_add_mtu() {
+	setup namespaces || return 2
+
+	run_cmd ${ns_a} ip link add vti4_a type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
+	[ $? -ne 0 ] && err "  vti not supported" && return 2
+	run_cmd ${ns_a} ip link del vti4_a
+
+	fail=0
+
+	min=68
+	max=$((65535 - 20))
+	# Check invalid values first
+	for v in $((min - 1)) $((max + 1)); do
+		run_cmd ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
+		# This can fail, or MTU can be adjusted to a proper value
+		[ $? -ne 0 ] && continue
+		mtu="$(link_get_mtu "${ns_a}" vti4_a)"
+		if [ ${mtu} -lt ${min} -o ${mtu} -gt ${max} ]; then
+			err "  vti tunnel created with invalid MTU ${mtu}"
+			fail=1
+		fi
+		run_cmd ${ns_a} ip link del vti4_a
+	done
+
+	# Now check valid values
+	for v in ${min} 1300 ${max}; do
+		run_cmd ${ns_a} ip link add vti4_a mtu ${v} type vti local ${veth4_a_addr} remote ${veth4_b_addr} key 10
+		mtu="$(link_get_mtu "${ns_a}" vti4_a)"
+		run_cmd ${ns_a} ip link del vti4_a
+		if [ "${mtu}" != "${v}" ]; then
+			err "  vti MTU ${mtu} doesn't match configured value ${v}"
+			fail=1
+		fi
+	done
+
+	return ${fail}
+}
+
+test_pmtu_vti6_link_add_mtu() {
+	setup namespaces || return 2
+
+	run_cmd ${ns_a} ip link add vti6_a type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
+	[ $? -ne 0 ] && err "  vti6 not supported" && return 2
+	run_cmd ${ns_a} ip link del vti6_a
+
+	fail=0
+
+	min=68			# vti6 can carry IPv4 packets too
+	max=$((65535 - 40))
+	# Check invalid values first
+	for v in $((min - 1)) $((max + 1)); do
+		run_cmd ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
+		# This can fail, or MTU can be adjusted to a proper value
+		[ $? -ne 0 ] && continue
+		mtu="$(link_get_mtu "${ns_a}" vti6_a)"
+		if [ ${mtu} -lt ${min} -o ${mtu} -gt ${max} ]; then
+			err "  vti6 tunnel created with invalid MTU ${v}"
+			fail=1
+		fi
+		run_cmd ${ns_a} ip link del vti6_a
+	done
+
+	# Now check valid values
+	for v in 68 1280 1300 $((65535 - 40)); do
+		run_cmd ${ns_a} ip link add vti6_a mtu ${v} type vti6 local ${veth6_a_addr} remote ${veth6_b_addr} key 10
+		mtu="$(link_get_mtu "${ns_a}" vti6_a)"
+		run_cmd ${ns_a} ip link del vti6_a
+		if [ "${mtu}" != "${v}" ]; then
+			err "  vti6 MTU ${mtu} doesn't match configured value ${v}"
+			fail=1
+		fi
+	done
+
+	return ${fail}
+}
+
+test_pmtu_vti6_link_change_mtu() {
+	setup namespaces || return 2
+
+	run_cmd ${ns_a} ip link add dummy0 mtu 1500 type dummy
+	[ $? -ne 0 ] && err "  dummy not supported" && return 2
+	run_cmd ${ns_a} ip link add dummy1 mtu 3000 type dummy
+	run_cmd ${ns_a} ip link set dummy0 up
+	run_cmd ${ns_a} ip link set dummy1 up
+
+	run_cmd ${ns_a} ip addr add ${dummy6_0_prefix}1/${dummy6_mask} dev dummy0
+	run_cmd ${ns_a} ip addr add ${dummy6_1_prefix}1/${dummy6_mask} dev dummy1
+
+	fail=0
+
+	# Create vti6 interface bound to device, passing MTU, check it
+	run_cmd ${ns_a} ip link add vti6_a mtu 1300 type vti6 remote ${dummy6_0_prefix}2 local ${dummy6_0_prefix}1
+	mtu="$(link_get_mtu "${ns_a}" vti6_a)"
+	if [ ${mtu} -ne 1300 ]; then
+		err "  vti6 MTU ${mtu} doesn't match configured value 1300"
+		fail=1
+	fi
+
+	# Move to another device with different MTU, without passing MTU, check
+	# MTU is adjusted
+	run_cmd ${ns_a} ip link set vti6_a type vti6 remote ${dummy6_1_prefix}2 local ${dummy6_1_prefix}1
+	mtu="$(link_get_mtu "${ns_a}" vti6_a)"
+	if [ ${mtu} -ne $((3000 - 40)) ]; then
+		err "  vti MTU ${mtu} is not dummy MTU 3000 minus IPv6 header length"
+		fail=1
+	fi
+
+	# Move it back, passing MTU, check MTU is not overridden
+	run_cmd ${ns_a} ip link set vti6_a mtu 1280 type vti6 remote ${dummy6_0_prefix}2 local ${dummy6_0_prefix}1
+	mtu="$(link_get_mtu "${ns_a}" vti6_a)"
+	if [ ${mtu} -ne 1280 ]; then
+		err "  vti6 MTU ${mtu} doesn't match configured value 1280"
+		fail=1
+	fi
+
+	return ${fail}
+}
+
+check_command() {
+	cmd=${1}
+
+	if ! which ${cmd} > /dev/null 2>&1; then
+		err "  missing required command: '${cmd}'"
+		return 1
+	fi
+	return 0
+}
+
+test_cleanup_vxlanX_exception() {
+	outer="${1}"
+	encap="vxlan"
+	ll_mtu=4000
+
+	check_command taskset || return 2
+	cpu_list=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2)
+
+	setup namespaces routing ${encap}${outer} || return 2
+	trace "${ns_a}" ${encap}_a   "${ns_b}"  ${encap}_b \
+	      "${ns_a}" veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}"  veth_A-R1 $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
+	mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
+
+	# Fill exception cache for multiple CPUs (2)
+	# we can always use inner IPv4 for that
+	for cpu in ${cpu_list}; do
+		run_cmd taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr}
+	done
+
+	${ns_a} ip link del dev veth_A-R1 &
+	iplink_pid=$!
+	sleep 1
+	if [ "$(cat /proc/${iplink_pid}/cmdline 2>/dev/null | tr -d '\0')" = "iplinkdeldevveth_A-R1" ]; then
+		err "  can't delete veth device in a timely manner, PMTU dst likely leaked"
+		return 1
+	fi
+}
+
+test_cleanup_ipv6_exception() {
+	test_cleanup_vxlanX_exception 6
+}
+
+test_cleanup_ipv4_exception() {
+	test_cleanup_vxlanX_exception 4
+}
+
+run_test() {
+	(
+	tname="$1"
+	tdesc="$2"
+
+	unset IFS
+
+	# Since cleanup() relies on variables modified by this subshell, it
+	# has to run in this context.
+	trap cleanup EXIT
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "\n##########################################################################\n\n"
+	fi
+
+	eval test_${tname}
+	ret=$?
+
+	if [ $ret -eq 0 ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${tdesc}"
+	elif [ $ret -eq 1 ]; then
+		printf "TEST: %-60s  [FAIL]\n" "${tdesc}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "Pausing. Hit enter to continue"
+			read a
+		fi
+		err_flush
+		exit 1
+	elif [ $ret -eq 2 ]; then
+		printf "TEST: %-60s  [SKIP]\n" "${tdesc}"
+		err_flush
+	fi
+
+	return $ret
+	)
+	ret=$?
+	[ $ret -ne 0 ] && exitcode=1
+
+	return $ret
+}
+
+run_test_nh() {
+	tname="$1"
+	tdesc="$2"
+
+	USE_NH=yes
+	run_test "${tname}" "${tdesc} - nexthop objects"
+	USE_NH=no
+}
+
+test_list_flush_ipv4_exception() {
+	setup namespaces routing || return 2
+	trace "${ns_a}"  veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_r1}" veth_R1-B    "${ns_b}"  veth_B-R1 \
+	      "${ns_a}"  veth_A-R2    "${ns_r2}" veth_R2-A \
+	      "${ns_r2}" veth_R2-B    "${ns_b}"  veth_B-R2
+
+	dst_prefix1="${prefix4}.${b_r1}."
+	dst2="${prefix4}.${b_r2}.1"
+
+	# Set up initial MTU values
+	mtu "${ns_a}"  veth_A-R1 2000
+	mtu "${ns_r1}" veth_R1-A 2000
+	mtu "${ns_r1}" veth_R1-B 1500
+	mtu "${ns_b}"  veth_B-R1 1500
+
+	mtu "${ns_a}"  veth_A-R2 2000
+	mtu "${ns_r2}" veth_R2-A 2000
+	mtu "${ns_r2}" veth_R2-B 1500
+	mtu "${ns_b}"  veth_B-R2 1500
+
+	fail=0
+
+	# Add 100 addresses for veth endpoint on B reached by default A route
+	for i in $(seq 100 199); do
+		run_cmd ${ns_b} ip addr add "${dst_prefix1}${i}" dev veth_B-R1
+	done
+
+	# Create 100 cached route exceptions for path via R1, one via R2. Note
+	# that with IPv4 we need to actually cause a route lookup that matches
+	# the exception caused by ICMP, in order to actually have a cached
+	# route, so we need to ping each destination twice
+	for i in $(seq 100 199); do
+		run_cmd ${ns_a} ping -q -M want -i 0.1 -c 2 -s 1800 "${dst_prefix1}${i}"
+	done
+	run_cmd ${ns_a} ping -q -M want -i 0.1 -c 2 -s 1800 "${dst2}"
+
+	if [ "$(${ns_a} ip -oneline route list cache | wc -l)" -ne 101 ]; then
+		err "  can't list cached exceptions"
+		fail=1
+	fi
+
+	run_cmd ${ns_a} ip route flush cache
+	pmtu1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst_prefix}1)"
+	pmtu2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst_prefix}2)"
+	if [ -n "${pmtu1}" ] || [ -n "${pmtu2}" ] || \
+	   [ -n "$(${ns_a} ip route list cache)" ]; then
+		err "  can't flush cached exceptions"
+		fail=1
+	fi
+
+	return ${fail}
+}
+
+test_list_flush_ipv6_exception() {
+	setup namespaces routing || return 2
+	trace "${ns_a}"  veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_r1}" veth_R1-B    "${ns_b}"  veth_B-R1 \
+	      "${ns_a}"  veth_A-R2    "${ns_r2}" veth_R2-A \
+	      "${ns_r2}" veth_R2-B    "${ns_b}"  veth_B-R2
+
+	dst_prefix1="${prefix6}:${b_r1}::"
+	dst2="${prefix6}:${b_r2}::1"
+
+	# Set up initial MTU values
+	mtu "${ns_a}"  veth_A-R1 2000
+	mtu "${ns_r1}" veth_R1-A 2000
+	mtu "${ns_r1}" veth_R1-B 1500
+	mtu "${ns_b}"  veth_B-R1 1500
+
+	mtu "${ns_a}"  veth_A-R2 2000
+	mtu "${ns_r2}" veth_R2-A 2000
+	mtu "${ns_r2}" veth_R2-B 1500
+	mtu "${ns_b}"  veth_B-R2 1500
+
+	fail=0
+
+	# Add 100 addresses for veth endpoint on B reached by default A route
+	for i in $(seq 100 199); do
+		run_cmd ${ns_b} ip addr add "${dst_prefix1}${i}" dev veth_B-R1
+	done
+
+	# Create 100 cached route exceptions for path via R1, one via R2
+	for i in $(seq 100 199); do
+		run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s 1800 "${dst_prefix1}${i}"
+	done
+	run_cmd ${ns_a} ping -q -M want -i 0.1 -w 1 -s 1800 "${dst2}"
+	if [ "$(${ns_a} ip -oneline -6 route list cache | wc -l)" -ne 101 ]; then
+		err "  can't list cached exceptions"
+		fail=1
+	fi
+
+	run_cmd ${ns_a} ip -6 route flush cache
+	pmtu1="$(route_get_dst_pmtu_from_exception "${ns_a}" "${dst_prefix1}100")"
+	pmtu2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	if [ -n "${pmtu1}" ] || [ -n "${pmtu2}" ] || \
+	   [ -n "$(${ns_a} ip -6 route list cache)" ]; then
+		err "  can't flush cached exceptions"
+		fail=1
+	fi
+
+	return ${fail}
+}
+
+test_pmtu_ipvX_route_change() {
+	family=${1}
+
+	setup namespaces routing || return 2
+	trace "${ns_a}"  veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_r1}" veth_R1-B    "${ns_b}"  veth_B-R1 \
+	      "${ns_a}"  veth_A-R2    "${ns_r2}" veth_R2-A \
+	      "${ns_r2}" veth_R2-B    "${ns_b}"  veth_B-R2
+
+	if [ ${family} -eq 4 ]; then
+		ping=ping
+		dst1="${prefix4}.${b_r1}.1"
+		dst2="${prefix4}.${b_r2}.1"
+		gw="${prefix4}.${a_r1}.2"
+	else
+		ping=${ping6}
+		dst1="${prefix6}:${b_r1}::1"
+		dst2="${prefix6}:${b_r2}::1"
+		gw="${prefix6}:${a_r1}::2"
+	fi
+
+	# Set up initial MTU values
+	mtu "${ns_a}"  veth_A-R1 2000
+	mtu "${ns_r1}" veth_R1-A 2000
+	mtu "${ns_r1}" veth_R1-B 1400
+	mtu "${ns_b}"  veth_B-R1 1400
+
+	mtu "${ns_a}"  veth_A-R2 2000
+	mtu "${ns_r2}" veth_R2-A 2000
+	mtu "${ns_r2}" veth_R2-B 1500
+	mtu "${ns_b}"  veth_B-R2 1500
+
+	# Create route exceptions
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1}
+	run_cmd ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2}
+
+	# Check that exceptions have been created with the correct PMTU
+	pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})"
+	check_pmtu_value "1400" "${pmtu_1}" "exceeding MTU" || return 1
+	pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})"
+	check_pmtu_value "1500" "${pmtu_2}" "exceeding MTU" || return 1
+
+	# Replace the route from A to R1
+	run_cmd ${ns_a} ip route change default via ${gw}
+
+	# Delete the device in A
+	run_cmd ${ns_a} ip link del "veth_A-R1"
+}
+
+test_pmtu_ipv4_route_change() {
+	test_pmtu_ipvX_route_change 4
+}
+
+test_pmtu_ipv6_route_change() {
+	test_pmtu_ipvX_route_change 6
+}
+
+usage() {
+	echo
+	echo "$0 [OPTIONS] [TEST]..."
+	echo "If no TEST argument is given, all tests will be run."
+	echo
+	echo "Options"
+	echo "  --trace: capture traffic to TEST_INTERFACE.pcap"
+	echo
+	echo "Available tests${tests}"
+	exit 1
+}
+
+################################################################################
+#
+exitcode=0
+desc=0
+
+while getopts :ptv o
+do
+	case $o in
+	p) PAUSE_ON_FAIL=yes;;
+	v) VERBOSE=1;;
+	t) if which tcpdump > /dev/null 2>&1; then
+		TRACING=1
+	   else
+		echo "=== tcpdump not available, tracing disabled"
+	   fi
+	   ;;
+	*) usage;;
+	esac
+done
+shift $(($OPTIND-1))
+
+IFS="	
+"
+
+for arg do
+	# Check first that all requested tests are available before running any
+	command -v > /dev/null "test_${arg}" || { echo "=== Test ${arg} not found"; usage; }
+done
+
+trap cleanup EXIT
+
+# start clean
+cleanup
+
+HAVE_NH=no
+ip nexthop ls >/dev/null 2>&1
+[ $? -eq 0 ] && HAVE_NH=yes
+
+name=""
+desc=""
+rerun_nh=0
+for t in ${tests}; do
+	[ "${name}" = "" ]	&& name="${t}"	&& continue
+	[ "${desc}" = "" ]	&& desc="${t}"	&& continue
+
+	if [ "${HAVE_NH}" = "yes" ]; then
+		rerun_nh="${t}"
+	fi
+
+	run_this=1
+	for arg do
+		[ "${arg}" != "${arg#--*}" ] && continue
+		[ "${arg}" = "${name}" ] && run_this=1 && break
+		run_this=0
+	done
+	if [ $run_this -eq 1 ]; then
+		run_test "${name}" "${desc}"
+		# if test was skipped no need to retry with nexthop objects
+		[ $? -eq 2 ] && rerun_nh=0
+
+		if [ "${rerun_nh}" = "1" ]; then
+			run_test_nh "${name}" "${desc}"
+		fi
+	fi
+	name=""
+	desc=""
+	rerun_nh=0
+done
+
+exit ${exitcode}
diff --git a/tools/testing/selftests/net/psock_fanout.c b/tools/testing/selftests/net/psock_fanout.c
new file mode 100644
index 000000000..2c522f7a0
--- /dev/null
+++ b/tools/testing/selftests/net/psock_fanout.c
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Google Inc.
+ * Author: Willem de Bruijn (willemb@google.com)
+ *
+ * A basic test of packet socket fanout behavior.
+ *
+ * Control:
+ * - create fanout fails as expected with illegal flag combinations
+ * - join   fanout fails as expected with diverging types or flags
+ *
+ * Datapath:
+ *   Open a pair of packet sockets and a pair of INET sockets, send a known
+ *   number of packets across the two INET sockets and count the number of
+ *   packets enqueued onto the two packet sockets.
+ *
+ *   The test currently runs for
+ *   - PACKET_FANOUT_HASH
+ *   - PACKET_FANOUT_HASH with PACKET_FANOUT_FLAG_ROLLOVER
+ *   - PACKET_FANOUT_LB
+ *   - PACKET_FANOUT_CPU
+ *   - PACKET_FANOUT_ROLLOVER
+ *   - PACKET_FANOUT_CBPF
+ *   - PACKET_FANOUT_EBPF
+ *
+ * Todo:
+ * - functionality: PACKET_FANOUT_FLAG_DEFRAG
+ */
+
+#define _GNU_SOURCE		/* for sched_setaffinity */
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/unistd.h>	/* for __NR_bpf */
+#include <linux/filter.h>
+#include <linux/bpf.h>
+#include <linux/if_packet.h>
+#include <net/if.h>
+#include <net/ethernet.h>
+#include <netinet/ip.h>
+#include <netinet/udp.h>
+#include <poll.h>
+#include <sched.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "psock_lib.h"
+
+#define RING_NUM_FRAMES			20
+
+/* Open a socket in a given fanout mode.
+ * @return -1 if mode is bad, a valid socket otherwise */
+static int sock_fanout_open(uint16_t typeflags, uint16_t group_id)
+{
+	struct sockaddr_ll addr = {0};
+	int fd, val;
+
+	fd = socket(PF_PACKET, SOCK_RAW, 0);
+	if (fd < 0) {
+		perror("socket packet");
+		exit(1);
+	}
+
+	pair_udp_setfilter(fd);
+
+	addr.sll_family = AF_PACKET;
+	addr.sll_protocol = htons(ETH_P_IP);
+	addr.sll_ifindex = if_nametoindex("lo");
+	if (addr.sll_ifindex == 0) {
+		perror("if_nametoindex");
+		exit(1);
+	}
+	if (bind(fd, (void *) &addr, sizeof(addr))) {
+		perror("bind packet");
+		exit(1);
+	}
+
+	val = (((int) typeflags) << 16) | group_id;
+	if (setsockopt(fd, SOL_PACKET, PACKET_FANOUT, &val, sizeof(val))) {
+		if (close(fd)) {
+			perror("close packet");
+			exit(1);
+		}
+		return -1;
+	}
+
+	return fd;
+}
+
+static void sock_fanout_set_cbpf(int fd)
+{
+	struct sock_filter bpf_filter[] = {
+		BPF_STMT(BPF_LD+BPF_B+BPF_ABS, 80),	      /* ldb [80] */
+		BPF_STMT(BPF_RET+BPF_A, 0),		      /* ret A */
+	};
+	struct sock_fprog bpf_prog;
+
+	bpf_prog.filter = bpf_filter;
+	bpf_prog.len = sizeof(bpf_filter) / sizeof(struct sock_filter);
+
+	if (setsockopt(fd, SOL_PACKET, PACKET_FANOUT_DATA, &bpf_prog,
+		       sizeof(bpf_prog))) {
+		perror("fanout data cbpf");
+		exit(1);
+	}
+}
+
+static void sock_fanout_getopts(int fd, uint16_t *typeflags, uint16_t *group_id)
+{
+	int sockopt;
+	socklen_t sockopt_len = sizeof(sockopt);
+
+	if (getsockopt(fd, SOL_PACKET, PACKET_FANOUT,
+		       &sockopt, &sockopt_len)) {
+		perror("failed to getsockopt");
+		exit(1);
+	}
+	*typeflags = sockopt >> 16;
+	*group_id = sockopt & 0xfffff;
+}
+
+static void sock_fanout_set_ebpf(int fd)
+{
+	static char log_buf[65536];
+
+	const int len_off = __builtin_offsetof(struct __sk_buff, len);
+	struct bpf_insn prog[] = {
+		{ BPF_ALU64 | BPF_MOV | BPF_X,   6, 1, 0, 0 },
+		{ BPF_LDX   | BPF_W   | BPF_MEM, 0, 6, len_off, 0 },
+		{ BPF_JMP   | BPF_JGE | BPF_K,   0, 0, 1, DATA_LEN },
+		{ BPF_JMP   | BPF_JA  | BPF_K,   0, 0, 4, 0 },
+		{ BPF_LD    | BPF_B   | BPF_ABS, 0, 0, 0, 0x50 },
+		{ BPF_JMP   | BPF_JEQ | BPF_K,   0, 0, 2, DATA_CHAR },
+		{ BPF_JMP   | BPF_JEQ | BPF_K,   0, 0, 1, DATA_CHAR_1 },
+		{ BPF_ALU   | BPF_MOV | BPF_K,   0, 0, 0, 0 },
+		{ BPF_JMP   | BPF_EXIT,          0, 0, 0, 0 }
+	};
+	union bpf_attr attr;
+	int pfd;
+
+	memset(&attr, 0, sizeof(attr));
+	attr.prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
+	attr.insns = (unsigned long) prog;
+	attr.insn_cnt = sizeof(prog) / sizeof(prog[0]);
+	attr.license = (unsigned long) "GPL";
+	attr.log_buf = (unsigned long) log_buf,
+	attr.log_size = sizeof(log_buf),
+	attr.log_level = 1,
+
+	pfd = syscall(__NR_bpf, BPF_PROG_LOAD, &attr, sizeof(attr));
+	if (pfd < 0) {
+		perror("bpf");
+		fprintf(stderr, "bpf verifier:\n%s\n", log_buf);
+		exit(1);
+	}
+
+	if (setsockopt(fd, SOL_PACKET, PACKET_FANOUT_DATA, &pfd, sizeof(pfd))) {
+		perror("fanout data ebpf");
+		exit(1);
+	}
+
+	if (close(pfd)) {
+		perror("close ebpf");
+		exit(1);
+	}
+}
+
+static char *sock_fanout_open_ring(int fd)
+{
+	struct tpacket_req req = {
+		.tp_block_size = getpagesize(),
+		.tp_frame_size = getpagesize(),
+		.tp_block_nr   = RING_NUM_FRAMES,
+		.tp_frame_nr   = RING_NUM_FRAMES,
+	};
+	char *ring;
+	int val = TPACKET_V2;
+
+	if (setsockopt(fd, SOL_PACKET, PACKET_VERSION, (void *) &val,
+		       sizeof(val))) {
+		perror("packetsock ring setsockopt version");
+		exit(1);
+	}
+	if (setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req,
+		       sizeof(req))) {
+		perror("packetsock ring setsockopt");
+		exit(1);
+	}
+
+	ring = mmap(0, req.tp_block_size * req.tp_block_nr,
+		    PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
+	if (ring == MAP_FAILED) {
+		perror("packetsock ring mmap");
+		exit(1);
+	}
+
+	return ring;
+}
+
+static int sock_fanout_read_ring(int fd, void *ring)
+{
+	struct tpacket2_hdr *header = ring;
+	int count = 0;
+
+	while (count < RING_NUM_FRAMES && header->tp_status & TP_STATUS_USER) {
+		count++;
+		header = ring + (count * getpagesize());
+	}
+
+	return count;
+}
+
+static int sock_fanout_read(int fds[], char *rings[], const int expect[])
+{
+	int ret[2];
+
+	ret[0] = sock_fanout_read_ring(fds[0], rings[0]);
+	ret[1] = sock_fanout_read_ring(fds[1], rings[1]);
+
+	fprintf(stderr, "info: count=%d,%d, expect=%d,%d\n",
+			ret[0], ret[1], expect[0], expect[1]);
+
+	if ((!(ret[0] == expect[0] && ret[1] == expect[1])) &&
+	    (!(ret[0] == expect[1] && ret[1] == expect[0]))) {
+		fprintf(stderr, "warning: incorrect queue lengths\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+/* Test illegal mode + flag combination */
+static void test_control_single(void)
+{
+	fprintf(stderr, "test: control single socket\n");
+
+	if (sock_fanout_open(PACKET_FANOUT_ROLLOVER |
+			       PACKET_FANOUT_FLAG_ROLLOVER, 0) != -1) {
+		fprintf(stderr, "ERROR: opened socket with dual rollover\n");
+		exit(1);
+	}
+}
+
+/* Test illegal group with different modes or flags */
+static void test_control_group(void)
+{
+	int fds[2];
+
+	fprintf(stderr, "test: control multiple sockets\n");
+
+	fds[0] = sock_fanout_open(PACKET_FANOUT_HASH, 0);
+	if (fds[0] == -1) {
+		fprintf(stderr, "ERROR: failed to open HASH socket\n");
+		exit(1);
+	}
+	if (sock_fanout_open(PACKET_FANOUT_HASH |
+			       PACKET_FANOUT_FLAG_DEFRAG, 0) != -1) {
+		fprintf(stderr, "ERROR: joined group with wrong flag defrag\n");
+		exit(1);
+	}
+	if (sock_fanout_open(PACKET_FANOUT_HASH |
+			       PACKET_FANOUT_FLAG_ROLLOVER, 0) != -1) {
+		fprintf(stderr, "ERROR: joined group with wrong flag ro\n");
+		exit(1);
+	}
+	if (sock_fanout_open(PACKET_FANOUT_CPU, 0) != -1) {
+		fprintf(stderr, "ERROR: joined group with wrong mode\n");
+		exit(1);
+	}
+	fds[1] = sock_fanout_open(PACKET_FANOUT_HASH, 0);
+	if (fds[1] == -1) {
+		fprintf(stderr, "ERROR: failed to join group\n");
+		exit(1);
+	}
+	if (close(fds[1]) || close(fds[0])) {
+		fprintf(stderr, "ERROR: closing sockets\n");
+		exit(1);
+	}
+}
+
+/* Test creating a unique fanout group ids */
+static void test_unique_fanout_group_ids(void)
+{
+	int fds[3];
+	uint16_t typeflags, first_group_id, second_group_id;
+
+	fprintf(stderr, "test: unique ids\n");
+
+	fds[0] = sock_fanout_open(PACKET_FANOUT_HASH |
+				  PACKET_FANOUT_FLAG_UNIQUEID, 0);
+	if (fds[0] == -1) {
+		fprintf(stderr, "ERROR: failed to create a unique id group.\n");
+		exit(1);
+	}
+
+	sock_fanout_getopts(fds[0], &typeflags, &first_group_id);
+	if (typeflags != PACKET_FANOUT_HASH) {
+		fprintf(stderr, "ERROR: unexpected typeflags %x\n", typeflags);
+		exit(1);
+	}
+
+	if (sock_fanout_open(PACKET_FANOUT_CPU, first_group_id) != -1) {
+		fprintf(stderr, "ERROR: joined group with wrong type.\n");
+		exit(1);
+	}
+
+	fds[1] = sock_fanout_open(PACKET_FANOUT_HASH, first_group_id);
+	if (fds[1] == -1) {
+		fprintf(stderr,
+			"ERROR: failed to join previously created group.\n");
+		exit(1);
+	}
+
+	fds[2] = sock_fanout_open(PACKET_FANOUT_HASH |
+				  PACKET_FANOUT_FLAG_UNIQUEID, 0);
+	if (fds[2] == -1) {
+		fprintf(stderr,
+			"ERROR: failed to create a second unique id group.\n");
+		exit(1);
+	}
+
+	sock_fanout_getopts(fds[2], &typeflags, &second_group_id);
+	if (sock_fanout_open(PACKET_FANOUT_HASH | PACKET_FANOUT_FLAG_UNIQUEID,
+			     second_group_id) != -1) {
+		fprintf(stderr,
+			"ERROR: specified a group id when requesting unique id\n");
+		exit(1);
+	}
+
+	if (close(fds[0]) || close(fds[1]) || close(fds[2])) {
+		fprintf(stderr, "ERROR: closing sockets\n");
+		exit(1);
+	}
+}
+
+static int test_datapath(uint16_t typeflags, int port_off,
+			 const int expect1[], const int expect2[])
+{
+	const int expect0[] = { 0, 0 };
+	char *rings[2];
+	uint8_t type = typeflags & 0xFF;
+	int fds[2], fds_udp[2][2], ret;
+
+	fprintf(stderr, "\ntest: datapath 0x%hx ports %hu,%hu\n",
+		typeflags, (uint16_t)PORT_BASE,
+		(uint16_t)(PORT_BASE + port_off));
+
+	fds[0] = sock_fanout_open(typeflags, 0);
+	fds[1] = sock_fanout_open(typeflags, 0);
+	if (fds[0] == -1 || fds[1] == -1) {
+		fprintf(stderr, "ERROR: failed open\n");
+		exit(1);
+	}
+	if (type == PACKET_FANOUT_CBPF)
+		sock_fanout_set_cbpf(fds[0]);
+	else if (type == PACKET_FANOUT_EBPF)
+		sock_fanout_set_ebpf(fds[0]);
+
+	rings[0] = sock_fanout_open_ring(fds[0]);
+	rings[1] = sock_fanout_open_ring(fds[1]);
+	pair_udp_open(fds_udp[0], PORT_BASE);
+	pair_udp_open(fds_udp[1], PORT_BASE + port_off);
+	sock_fanout_read(fds, rings, expect0);
+
+	/* Send data, but not enough to overflow a queue */
+	pair_udp_send(fds_udp[0], 15);
+	pair_udp_send_char(fds_udp[1], 5, DATA_CHAR_1);
+	ret = sock_fanout_read(fds, rings, expect1);
+
+	/* Send more data, overflow the queue */
+	pair_udp_send_char(fds_udp[0], 15, DATA_CHAR_1);
+	/* TODO: ensure consistent order between expect1 and expect2 */
+	ret |= sock_fanout_read(fds, rings, expect2);
+
+	if (munmap(rings[1], RING_NUM_FRAMES * getpagesize()) ||
+	    munmap(rings[0], RING_NUM_FRAMES * getpagesize())) {
+		fprintf(stderr, "close rings\n");
+		exit(1);
+	}
+	if (close(fds_udp[1][1]) || close(fds_udp[1][0]) ||
+	    close(fds_udp[0][1]) || close(fds_udp[0][0]) ||
+	    close(fds[1]) || close(fds[0])) {
+		fprintf(stderr, "close datapath\n");
+		exit(1);
+	}
+
+	return ret;
+}
+
+static int set_cpuaffinity(int cpuid)
+{
+	cpu_set_t mask;
+
+	CPU_ZERO(&mask);
+	CPU_SET(cpuid, &mask);
+	if (sched_setaffinity(0, sizeof(mask), &mask)) {
+		if (errno != EINVAL) {
+			fprintf(stderr, "setaffinity %d\n", cpuid);
+			exit(1);
+		}
+		return 1;
+	}
+
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	const int expect_hash[2][2]	= { { 15, 5 },  { 20, 5 } };
+	const int expect_hash_rb[2][2]	= { { 15, 5 },  { 20, 15 } };
+	const int expect_lb[2][2]	= { { 10, 10 }, { 18, 17 } };
+	const int expect_rb[2][2]	= { { 15, 5 },  { 20, 15 } };
+	const int expect_cpu0[2][2]	= { { 20, 0 },  { 20, 0 } };
+	const int expect_cpu1[2][2]	= { { 0, 20 },  { 0, 20 } };
+	const int expect_bpf[2][2]	= { { 15, 5 },  { 15, 20 } };
+	const int expect_uniqueid[2][2] = { { 20, 20},  { 20, 20 } };
+	int port_off = 2, tries = 20, ret;
+
+	test_control_single();
+	test_control_group();
+	test_unique_fanout_group_ids();
+
+	/* find a set of ports that do not collide onto the same socket */
+	ret = test_datapath(PACKET_FANOUT_HASH, port_off,
+			    expect_hash[0], expect_hash[1]);
+	while (ret) {
+		fprintf(stderr, "info: trying alternate ports (%d)\n", tries);
+		ret = test_datapath(PACKET_FANOUT_HASH, ++port_off,
+				    expect_hash[0], expect_hash[1]);
+		if (!--tries) {
+			fprintf(stderr, "too many collisions\n");
+			return 1;
+		}
+	}
+
+	ret |= test_datapath(PACKET_FANOUT_HASH | PACKET_FANOUT_FLAG_ROLLOVER,
+			     port_off, expect_hash_rb[0], expect_hash_rb[1]);
+	ret |= test_datapath(PACKET_FANOUT_LB,
+			     port_off, expect_lb[0], expect_lb[1]);
+	ret |= test_datapath(PACKET_FANOUT_ROLLOVER,
+			     port_off, expect_rb[0], expect_rb[1]);
+
+	ret |= test_datapath(PACKET_FANOUT_CBPF,
+			     port_off, expect_bpf[0], expect_bpf[1]);
+	ret |= test_datapath(PACKET_FANOUT_EBPF,
+			     port_off, expect_bpf[0], expect_bpf[1]);
+
+	set_cpuaffinity(0);
+	ret |= test_datapath(PACKET_FANOUT_CPU, port_off,
+			     expect_cpu0[0], expect_cpu0[1]);
+	if (!set_cpuaffinity(1))
+		/* TODO: test that choice alternates with previous */
+		ret |= test_datapath(PACKET_FANOUT_CPU, port_off,
+				     expect_cpu1[0], expect_cpu1[1]);
+
+	ret |= test_datapath(PACKET_FANOUT_FLAG_UNIQUEID, port_off,
+			     expect_uniqueid[0], expect_uniqueid[1]);
+
+	if (ret)
+		return 1;
+
+	printf("OK. All tests passed\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/psock_lib.h b/tools/testing/selftests/net/psock_lib.h
new file mode 100644
index 000000000..faa884385
--- /dev/null
+++ b/tools/testing/selftests/net/psock_lib.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Google Inc.
+ * Author: Willem de Bruijn <willemb@google.com>
+ *         Daniel Borkmann <dborkman@redhat.com>
+ */
+
+#ifndef PSOCK_LIB_H
+#define PSOCK_LIB_H
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <string.h>
+#include <arpa/inet.h>
+#include <unistd.h>
+
+#define DATA_LEN			100
+#define DATA_CHAR			'a'
+#define DATA_CHAR_1			'b'
+
+#define PORT_BASE			8000
+
+#ifndef __maybe_unused
+# define __maybe_unused		__attribute__ ((__unused__))
+#endif
+
+static __maybe_unused void pair_udp_setfilter(int fd)
+{
+	/* the filter below checks for all of the following conditions that
+	 * are based on the contents of create_payload()
+	 *  ether type 0x800 and
+	 *  ip proto udp     and
+	 *  skb->len == DATA_LEN and
+	 *  udp[38] == 'a' or udp[38] == 'b'
+	 * It can be generated from the following bpf_asm input:
+	 *	ldh [12]
+	 *	jne #0x800, drop	; ETH_P_IP
+	 *	ldb [23]
+	 *	jneq #17, drop		; IPPROTO_UDP
+	 *	ld len			; ld skb->len
+	 *	jlt #100, drop		; DATA_LEN
+	 *	ldb [80]
+	 *	jeq #97, pass		; DATA_CHAR
+	 *	jne #98, drop		; DATA_CHAR_1
+	 *	pass:
+	 *	  ret #-1
+	 *	drop:
+	 *	  ret #0
+	 */
+	struct sock_filter bpf_filter[] = {
+		{ 0x28,  0,  0, 0x0000000c },
+		{ 0x15,  0,  8, 0x00000800 },
+		{ 0x30,  0,  0, 0x00000017 },
+		{ 0x15,  0,  6, 0x00000011 },
+		{ 0x80,  0,  0, 0000000000 },
+		{ 0x35,  0,  4, 0x00000064 },
+		{ 0x30,  0,  0, 0x00000050 },
+		{ 0x15,  1,  0, 0x00000061 },
+		{ 0x15,  0,  1, 0x00000062 },
+		{ 0x06,  0,  0, 0xffffffff },
+		{ 0x06,  0,  0, 0000000000 },
+	};
+	struct sock_fprog bpf_prog;
+
+	bpf_prog.filter = bpf_filter;
+	bpf_prog.len = sizeof(bpf_filter) / sizeof(struct sock_filter);
+
+	if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, &bpf_prog,
+		       sizeof(bpf_prog))) {
+		perror("setsockopt SO_ATTACH_FILTER");
+		exit(1);
+	}
+}
+
+static __maybe_unused void pair_udp_open(int fds[], uint16_t port)
+{
+	struct sockaddr_in saddr, daddr;
+
+	fds[0] = socket(PF_INET, SOCK_DGRAM, 0);
+	fds[1] = socket(PF_INET, SOCK_DGRAM, 0);
+	if (fds[0] == -1 || fds[1] == -1) {
+		fprintf(stderr, "ERROR: socket dgram\n");
+		exit(1);
+	}
+
+	memset(&saddr, 0, sizeof(saddr));
+	saddr.sin_family = AF_INET;
+	saddr.sin_port = htons(port);
+	saddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+	memset(&daddr, 0, sizeof(daddr));
+	daddr.sin_family = AF_INET;
+	daddr.sin_port = htons(port + 1);
+	daddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+	/* must bind both to get consistent hash result */
+	if (bind(fds[1], (void *) &daddr, sizeof(daddr))) {
+		perror("bind");
+		exit(1);
+	}
+	if (bind(fds[0], (void *) &saddr, sizeof(saddr))) {
+		perror("bind");
+		exit(1);
+	}
+	if (connect(fds[0], (void *) &daddr, sizeof(daddr))) {
+		perror("connect");
+		exit(1);
+	}
+}
+
+static __maybe_unused void pair_udp_send_char(int fds[], int num, char payload)
+{
+	char buf[DATA_LEN], rbuf[DATA_LEN];
+
+	memset(buf, payload, sizeof(buf));
+	while (num--) {
+		/* Should really handle EINTR and EAGAIN */
+		if (write(fds[0], buf, sizeof(buf)) != sizeof(buf)) {
+			fprintf(stderr, "ERROR: send failed left=%d\n", num);
+			exit(1);
+		}
+		if (read(fds[1], rbuf, sizeof(rbuf)) != sizeof(rbuf)) {
+			fprintf(stderr, "ERROR: recv failed left=%d\n", num);
+			exit(1);
+		}
+		if (memcmp(buf, rbuf, sizeof(buf))) {
+			fprintf(stderr, "ERROR: data failed left=%d\n", num);
+			exit(1);
+		}
+	}
+}
+
+static __maybe_unused void pair_udp_send(int fds[], int num)
+{
+	return pair_udp_send_char(fds, num, DATA_CHAR);
+}
+
+static __maybe_unused void pair_udp_close(int fds[])
+{
+	close(fds[0]);
+	close(fds[1]);
+}
+
+#endif /* PSOCK_LIB_H */
diff --git a/tools/testing/selftests/net/psock_snd.c b/tools/testing/selftests/net/psock_snd.c
new file mode 100644
index 000000000..7d15e10a9
--- /dev/null
+++ b/tools/testing/selftests/net/psock_snd.c
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <linux/filter.h>
+#include <linux/bpf.h>
+#include <linux/if_packet.h>
+#include <linux/if_vlan.h>
+#include <linux/virtio_net.h>
+#include <net/if.h>
+#include <net/ethernet.h>
+#include <netinet/ip.h>
+#include <netinet/udp.h>
+#include <poll.h>
+#include <sched.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "psock_lib.h"
+
+static bool	cfg_use_bind;
+static bool	cfg_use_csum_off;
+static bool	cfg_use_csum_off_bad;
+static bool	cfg_use_dgram;
+static bool	cfg_use_gso;
+static bool	cfg_use_qdisc_bypass;
+static bool	cfg_use_vlan;
+static bool	cfg_use_vnet;
+
+static char	*cfg_ifname = "lo";
+static int	cfg_mtu	= 1500;
+static int	cfg_payload_len = DATA_LEN;
+static int	cfg_truncate_len = INT_MAX;
+static uint16_t	cfg_port = 8000;
+
+/* test sending up to max mtu + 1 */
+#define TEST_SZ	(sizeof(struct virtio_net_hdr) + ETH_HLEN + ETH_MAX_MTU + 1)
+
+static char tbuf[TEST_SZ], rbuf[TEST_SZ];
+
+static unsigned long add_csum_hword(const uint16_t *start, int num_u16)
+{
+	unsigned long sum = 0;
+	int i;
+
+	for (i = 0; i < num_u16; i++)
+		sum += start[i];
+
+	return sum;
+}
+
+static uint16_t build_ip_csum(const uint16_t *start, int num_u16,
+			      unsigned long sum)
+{
+	sum += add_csum_hword(start, num_u16);
+
+	while (sum >> 16)
+		sum = (sum & 0xffff) + (sum >> 16);
+
+	return ~sum;
+}
+
+static int build_vnet_header(void *header)
+{
+	struct virtio_net_hdr *vh = header;
+
+	vh->hdr_len = ETH_HLEN + sizeof(struct iphdr) + sizeof(struct udphdr);
+
+	if (cfg_use_csum_off) {
+		vh->flags |= VIRTIO_NET_HDR_F_NEEDS_CSUM;
+		vh->csum_start = ETH_HLEN + sizeof(struct iphdr);
+		vh->csum_offset = __builtin_offsetof(struct udphdr, check);
+
+		/* position check field exactly one byte beyond end of packet */
+		if (cfg_use_csum_off_bad)
+			vh->csum_start += sizeof(struct udphdr) + cfg_payload_len -
+					  vh->csum_offset - 1;
+	}
+
+	if (cfg_use_gso) {
+		vh->gso_type = VIRTIO_NET_HDR_GSO_UDP;
+		vh->gso_size = cfg_mtu - sizeof(struct iphdr);
+	}
+
+	return sizeof(*vh);
+}
+
+static int build_eth_header(void *header)
+{
+	struct ethhdr *eth = header;
+
+	if (cfg_use_vlan) {
+		uint16_t *tag = header + ETH_HLEN;
+
+		eth->h_proto = htons(ETH_P_8021Q);
+		tag[1] = htons(ETH_P_IP);
+		return ETH_HLEN + 4;
+	}
+
+	eth->h_proto = htons(ETH_P_IP);
+	return ETH_HLEN;
+}
+
+static int build_ipv4_header(void *header, int payload_len)
+{
+	struct iphdr *iph = header;
+
+	iph->ihl = 5;
+	iph->version = 4;
+	iph->ttl = 8;
+	iph->tot_len = htons(sizeof(*iph) + sizeof(struct udphdr) + payload_len);
+	iph->id = htons(1337);
+	iph->protocol = IPPROTO_UDP;
+	iph->saddr = htonl((172 << 24) | (17 << 16) | 2);
+	iph->daddr = htonl((172 << 24) | (17 << 16) | 1);
+	iph->check = build_ip_csum((void *) iph, iph->ihl << 1, 0);
+
+	return iph->ihl << 2;
+}
+
+static int build_udp_header(void *header, int payload_len)
+{
+	const int alen = sizeof(uint32_t);
+	struct udphdr *udph = header;
+	int len = sizeof(*udph) + payload_len;
+
+	udph->source = htons(9);
+	udph->dest = htons(cfg_port);
+	udph->len = htons(len);
+
+	if (cfg_use_csum_off)
+		udph->check = build_ip_csum(header - (2 * alen), alen,
+					    htons(IPPROTO_UDP) + udph->len);
+	else
+		udph->check = 0;
+
+	return sizeof(*udph);
+}
+
+static int build_packet(int payload_len)
+{
+	int off = 0;
+
+	off += build_vnet_header(tbuf);
+	off += build_eth_header(tbuf + off);
+	off += build_ipv4_header(tbuf + off, payload_len);
+	off += build_udp_header(tbuf + off, payload_len);
+
+	if (off + payload_len > sizeof(tbuf))
+		error(1, 0, "payload length exceeds max");
+
+	memset(tbuf + off, DATA_CHAR, payload_len);
+
+	return off + payload_len;
+}
+
+static void do_bind(int fd)
+{
+	struct sockaddr_ll laddr = {0};
+
+	laddr.sll_family = AF_PACKET;
+	laddr.sll_protocol = htons(ETH_P_IP);
+	laddr.sll_ifindex = if_nametoindex(cfg_ifname);
+	if (!laddr.sll_ifindex)
+		error(1, errno, "if_nametoindex");
+
+	if (bind(fd, (void *)&laddr, sizeof(laddr)))
+		error(1, errno, "bind");
+}
+
+static void do_send(int fd, char *buf, int len)
+{
+	int ret;
+
+	if (!cfg_use_vnet) {
+		buf += sizeof(struct virtio_net_hdr);
+		len -= sizeof(struct virtio_net_hdr);
+	}
+	if (cfg_use_dgram) {
+		buf += ETH_HLEN;
+		len -= ETH_HLEN;
+	}
+
+	if (cfg_use_bind) {
+		ret = write(fd, buf, len);
+	} else {
+		struct sockaddr_ll laddr = {0};
+
+		laddr.sll_protocol = htons(ETH_P_IP);
+		laddr.sll_ifindex = if_nametoindex(cfg_ifname);
+		if (!laddr.sll_ifindex)
+			error(1, errno, "if_nametoindex");
+
+		ret = sendto(fd, buf, len, 0, (void *)&laddr, sizeof(laddr));
+	}
+
+	if (ret == -1)
+		error(1, errno, "write");
+	if (ret != len)
+		error(1, 0, "write: %u %u", ret, len);
+
+	fprintf(stderr, "tx: %u\n", ret);
+}
+
+static int do_tx(void)
+{
+	const int one = 1;
+	int fd, len;
+
+	fd = socket(PF_PACKET, cfg_use_dgram ? SOCK_DGRAM : SOCK_RAW, 0);
+	if (fd == -1)
+		error(1, errno, "socket t");
+
+	if (cfg_use_bind)
+		do_bind(fd);
+
+	if (cfg_use_qdisc_bypass &&
+	    setsockopt(fd, SOL_PACKET, PACKET_QDISC_BYPASS, &one, sizeof(one)))
+		error(1, errno, "setsockopt qdisc bypass");
+
+	if (cfg_use_vnet &&
+	    setsockopt(fd, SOL_PACKET, PACKET_VNET_HDR, &one, sizeof(one)))
+		error(1, errno, "setsockopt vnet");
+
+	len = build_packet(cfg_payload_len);
+
+	if (cfg_truncate_len < len)
+		len = cfg_truncate_len;
+
+	do_send(fd, tbuf, len);
+
+	if (close(fd))
+		error(1, errno, "close t");
+
+	return len;
+}
+
+static int setup_rx(void)
+{
+	struct timeval tv = { .tv_usec = 100 * 1000 };
+	struct sockaddr_in raddr = {0};
+	int fd;
+
+	fd = socket(PF_INET, SOCK_DGRAM, 0);
+	if (fd == -1)
+		error(1, errno, "socket r");
+
+	if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)))
+		error(1, errno, "setsockopt rcv timeout");
+
+	raddr.sin_family = AF_INET;
+	raddr.sin_port = htons(cfg_port);
+	raddr.sin_addr.s_addr = htonl(INADDR_ANY);
+
+	if (bind(fd, (void *)&raddr, sizeof(raddr)))
+		error(1, errno, "bind r");
+
+	return fd;
+}
+
+static void do_rx(int fd, int expected_len, char *expected)
+{
+	int ret;
+
+	ret = recv(fd, rbuf, sizeof(rbuf), 0);
+	if (ret == -1)
+		error(1, errno, "recv");
+	if (ret != expected_len)
+		error(1, 0, "recv: %u != %u", ret, expected_len);
+
+	if (memcmp(rbuf, expected, ret))
+		error(1, 0, "recv: data mismatch");
+
+	fprintf(stderr, "rx: %u\n", ret);
+}
+
+static int setup_sniffer(void)
+{
+	struct timeval tv = { .tv_usec = 100 * 1000 };
+	int fd;
+
+	fd = socket(PF_PACKET, SOCK_RAW, 0);
+	if (fd == -1)
+		error(1, errno, "socket p");
+
+	if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)))
+		error(1, errno, "setsockopt rcv timeout");
+
+	pair_udp_setfilter(fd);
+	do_bind(fd);
+
+	return fd;
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c;
+
+	while ((c = getopt(argc, argv, "bcCdgl:qt:vV")) != -1) {
+		switch (c) {
+		case 'b':
+			cfg_use_bind = true;
+			break;
+		case 'c':
+			cfg_use_csum_off = true;
+			break;
+		case 'C':
+			cfg_use_csum_off_bad = true;
+			break;
+		case 'd':
+			cfg_use_dgram = true;
+			break;
+		case 'g':
+			cfg_use_gso = true;
+			break;
+		case 'l':
+			cfg_payload_len = strtoul(optarg, NULL, 0);
+			break;
+		case 'q':
+			cfg_use_qdisc_bypass = true;
+			break;
+		case 't':
+			cfg_truncate_len = strtoul(optarg, NULL, 0);
+			break;
+		case 'v':
+			cfg_use_vnet = true;
+			break;
+		case 'V':
+			cfg_use_vlan = true;
+			break;
+		default:
+			error(1, 0, "%s: parse error", argv[0]);
+		}
+	}
+
+	if (cfg_use_vlan && cfg_use_dgram)
+		error(1, 0, "option vlan (-V) conflicts with dgram (-d)");
+
+	if (cfg_use_csum_off && !cfg_use_vnet)
+		error(1, 0, "option csum offload (-c) requires vnet (-v)");
+
+	if (cfg_use_csum_off_bad && !cfg_use_csum_off)
+		error(1, 0, "option csum bad (-C) requires csum offload (-c)");
+
+	if (cfg_use_gso && !cfg_use_csum_off)
+		error(1, 0, "option gso (-g) requires csum offload (-c)");
+}
+
+static void run_test(void)
+{
+	int fdr, fds, total_len;
+
+	fdr = setup_rx();
+	fds = setup_sniffer();
+
+	total_len = do_tx();
+
+	/* BPF filter accepts only this length, vlan changes MAC */
+	if (cfg_payload_len == DATA_LEN && !cfg_use_vlan)
+		do_rx(fds, total_len - sizeof(struct virtio_net_hdr),
+		      tbuf + sizeof(struct virtio_net_hdr));
+
+	do_rx(fdr, cfg_payload_len, tbuf + total_len - cfg_payload_len);
+
+	if (close(fds))
+		error(1, errno, "close s");
+	if (close(fdr))
+		error(1, errno, "close r");
+}
+
+int main(int argc, char **argv)
+{
+	parse_opts(argc, argv);
+
+	if (system("ip link set dev lo mtu 1500"))
+		error(1, errno, "ip link set mtu");
+	if (system("ip addr add dev lo 172.17.0.1/24"))
+		error(1, errno, "ip addr add");
+
+	run_test();
+
+	fprintf(stderr, "OK\n\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/psock_snd.sh b/tools/testing/selftests/net/psock_snd.sh
new file mode 100755
index 000000000..170be65e0
--- /dev/null
+++ b/tools/testing/selftests/net/psock_snd.sh
@@ -0,0 +1,98 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run a series of packet socket send regression tests
+
+set -e
+
+readonly mtu=1500
+readonly iphlen=20
+readonly udphlen=8
+
+readonly vnet_hlen=10
+readonly eth_hlen=14
+
+readonly mss="$((${mtu} - ${iphlen} - ${udphlen}))"
+readonly mss_exceeds="$((${mss} + 1))"
+
+readonly max_mtu=65535
+readonly max_mss="$((${max_mtu} - ${iphlen} - ${udphlen}))"
+readonly max_mss_exceeds="$((${max_mss} + 1))"
+
+# functional checks (not a full cross-product)
+
+echo "dgram"
+./in_netns.sh ./psock_snd -d
+
+echo "dgram bind"
+./in_netns.sh ./psock_snd -d -b
+
+echo "raw"
+./in_netns.sh ./psock_snd
+
+echo "raw bind"
+./in_netns.sh ./psock_snd -b
+
+echo "raw qdisc bypass"
+./in_netns.sh ./psock_snd -q
+
+echo "raw vlan"
+./in_netns.sh ./psock_snd -V
+
+echo "raw vnet hdr"
+./in_netns.sh ./psock_snd -v
+
+echo "raw csum_off"
+./in_netns.sh ./psock_snd -v -c
+
+echo "raw csum_off with bad offset (expected to fail)"
+(! ./in_netns.sh ./psock_snd -v -c -C)
+
+
+# bounds check: send {max, max + 1, min, min - 1} lengths
+
+echo "raw min size"
+./in_netns.sh ./psock_snd -l 0
+
+echo "raw mtu size"
+./in_netns.sh ./psock_snd -l "${mss}"
+
+echo "raw mtu size + 1 (expected to fail)"
+(! ./in_netns.sh ./psock_snd -l "${mss_exceeds}")
+
+# fails due to ARPHRD_ETHER check in packet_extra_vlan_len_allowed
+#
+# echo "raw vlan mtu size"
+# ./in_netns.sh ./psock_snd -V -l "${mss}"
+
+echo "raw vlan mtu size + 1 (expected to fail)"
+(! ./in_netns.sh ./psock_snd -V -l "${mss_exceeds}")
+
+echo "dgram mtu size"
+./in_netns.sh ./psock_snd -d -l "${mss}"
+
+echo "dgram mtu size + 1 (expected to fail)"
+(! ./in_netns.sh ./psock_snd -d -l "${mss_exceeds}")
+
+echo "raw truncate hlen (expected to fail: does not arrive)"
+(! ./in_netns.sh ./psock_snd -t "$((${vnet_hlen} + ${eth_hlen}))")
+
+echo "raw truncate hlen - 1 (expected to fail: EINVAL)"
+(! ./in_netns.sh ./psock_snd -t "$((${vnet_hlen} + ${eth_hlen} - 1))")
+
+
+# gso checks: implies -l, because with gso len must exceed gso_size
+
+echo "raw gso min size"
+./in_netns.sh ./psock_snd -v -c -g -l "${mss_exceeds}"
+
+echo "raw gso min size - 1 (expected to fail)"
+(! ./in_netns.sh ./psock_snd -v -c -g -l "${mss}")
+
+echo "raw gso max size"
+./in_netns.sh ./psock_snd -v -c -g -l "${max_mss}"
+
+echo "raw gso max size + 1 (expected to fail)"
+(! ./in_netns.sh ./psock_snd -v -c -g -l "${max_mss_exceeds}")
+
+echo "OK. All tests passed"
diff --git a/tools/testing/selftests/net/psock_tpacket.c b/tools/testing/selftests/net/psock_tpacket.c
new file mode 100644
index 000000000..404a2ce75
--- /dev/null
+++ b/tools/testing/selftests/net/psock_tpacket.c
@@ -0,0 +1,850 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Red Hat, Inc.
+ * Author: Daniel Borkmann <dborkman@redhat.com>
+ *         Chetan Loke <loke.chetan@gmail.com> (TPACKET_V3 usage example)
+ *
+ * A basic test of packet socket's TPACKET_V1/TPACKET_V2/TPACKET_V3 behavior.
+ *
+ * Control:
+ *   Test the setup of the TPACKET socket with different patterns that are
+ *   known to fail (TODO) resp. succeed (OK).
+ *
+ * Datapath:
+ *   Open a pair of packet sockets and send resp. receive an a priori known
+ *   packet pattern accross the sockets and check if it was received resp.
+ *   sent correctly. Fanout in combination with RX_RING is currently not
+ *   tested here.
+ *
+ *   The test currently runs for
+ *   - TPACKET_V1: RX_RING, TX_RING
+ *   - TPACKET_V2: RX_RING, TX_RING
+ *   - TPACKET_V3: RX_RING
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/mman.h>
+#include <linux/if_packet.h>
+#include <linux/filter.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <bits/wordsize.h>
+#include <net/ethernet.h>
+#include <netinet/ip.h>
+#include <arpa/inet.h>
+#include <stdint.h>
+#include <string.h>
+#include <assert.h>
+#include <net/if.h>
+#include <inttypes.h>
+#include <poll.h>
+
+#include "psock_lib.h"
+
+#include "../kselftest.h"
+
+#ifndef bug_on
+# define bug_on(cond)		assert(!(cond))
+#endif
+
+#ifndef __aligned_tpacket
+# define __aligned_tpacket	__attribute__((aligned(TPACKET_ALIGNMENT)))
+#endif
+
+#ifndef __align_tpacket
+# define __align_tpacket(x)	__attribute__((aligned(TPACKET_ALIGN(x))))
+#endif
+
+#define NUM_PACKETS		100
+#define ALIGN_8(x)		(((x) + 8 - 1) & ~(8 - 1))
+
+struct ring {
+	struct iovec *rd;
+	uint8_t *mm_space;
+	size_t mm_len, rd_len;
+	struct sockaddr_ll ll;
+	void (*walk)(int sock, struct ring *ring);
+	int type, rd_num, flen, version;
+	union {
+		struct tpacket_req  req;
+		struct tpacket_req3 req3;
+	};
+};
+
+struct block_desc {
+	uint32_t version;
+	uint32_t offset_to_priv;
+	struct tpacket_hdr_v1 h1;
+};
+
+union frame_map {
+	struct {
+		struct tpacket_hdr tp_h __aligned_tpacket;
+		struct sockaddr_ll s_ll __align_tpacket(sizeof(struct tpacket_hdr));
+	} *v1;
+	struct {
+		struct tpacket2_hdr tp_h __aligned_tpacket;
+		struct sockaddr_ll s_ll __align_tpacket(sizeof(struct tpacket2_hdr));
+	} *v2;
+	void *raw;
+};
+
+static unsigned int total_packets, total_bytes;
+
+static int pfsocket(int ver)
+{
+	int ret, sock = socket(PF_PACKET, SOCK_RAW, 0);
+	if (sock == -1) {
+		perror("socket");
+		exit(1);
+	}
+
+	ret = setsockopt(sock, SOL_PACKET, PACKET_VERSION, &ver, sizeof(ver));
+	if (ret == -1) {
+		perror("setsockopt");
+		exit(1);
+	}
+
+	return sock;
+}
+
+static void status_bar_update(void)
+{
+	if (total_packets % 10 == 0) {
+		fprintf(stderr, ".");
+		fflush(stderr);
+	}
+}
+
+static void test_payload(void *pay, size_t len)
+{
+	struct ethhdr *eth = pay;
+
+	if (len < sizeof(struct ethhdr)) {
+		fprintf(stderr, "test_payload: packet too "
+			"small: %zu bytes!\n", len);
+		exit(1);
+	}
+
+	if (eth->h_proto != htons(ETH_P_IP)) {
+		fprintf(stderr, "test_payload: wrong ethernet "
+			"type: 0x%x!\n", ntohs(eth->h_proto));
+		exit(1);
+	}
+}
+
+static void create_payload(void *pay, size_t *len)
+{
+	int i;
+	struct ethhdr *eth = pay;
+	struct iphdr *ip = pay + sizeof(*eth);
+
+	/* Lets create some broken crap, that still passes
+	 * our BPF filter.
+	 */
+
+	*len = DATA_LEN + 42;
+
+	memset(pay, 0xff, ETH_ALEN * 2);
+	eth->h_proto = htons(ETH_P_IP);
+
+	for (i = 0; i < sizeof(*ip); ++i)
+		((uint8_t *) pay)[i + sizeof(*eth)] = (uint8_t) rand();
+
+	ip->ihl = 5;
+	ip->version = 4;
+	ip->protocol = 0x11;
+	ip->frag_off = 0;
+	ip->ttl = 64;
+	ip->tot_len = htons((uint16_t) *len - sizeof(*eth));
+
+	ip->saddr = htonl(INADDR_LOOPBACK);
+	ip->daddr = htonl(INADDR_LOOPBACK);
+
+	memset(pay + sizeof(*eth) + sizeof(*ip),
+	       DATA_CHAR, DATA_LEN);
+}
+
+static inline int __v1_rx_kernel_ready(struct tpacket_hdr *hdr)
+{
+	return ((hdr->tp_status & TP_STATUS_USER) == TP_STATUS_USER);
+}
+
+static inline void __v1_rx_user_ready(struct tpacket_hdr *hdr)
+{
+	hdr->tp_status = TP_STATUS_KERNEL;
+	__sync_synchronize();
+}
+
+static inline int __v2_rx_kernel_ready(struct tpacket2_hdr *hdr)
+{
+	return ((hdr->tp_status & TP_STATUS_USER) == TP_STATUS_USER);
+}
+
+static inline void __v2_rx_user_ready(struct tpacket2_hdr *hdr)
+{
+	hdr->tp_status = TP_STATUS_KERNEL;
+	__sync_synchronize();
+}
+
+static inline int __v1_v2_rx_kernel_ready(void *base, int version)
+{
+	switch (version) {
+	case TPACKET_V1:
+		return __v1_rx_kernel_ready(base);
+	case TPACKET_V2:
+		return __v2_rx_kernel_ready(base);
+	default:
+		bug_on(1);
+		return 0;
+	}
+}
+
+static inline void __v1_v2_rx_user_ready(void *base, int version)
+{
+	switch (version) {
+	case TPACKET_V1:
+		__v1_rx_user_ready(base);
+		break;
+	case TPACKET_V2:
+		__v2_rx_user_ready(base);
+		break;
+	}
+}
+
+static void walk_v1_v2_rx(int sock, struct ring *ring)
+{
+	struct pollfd pfd;
+	int udp_sock[2];
+	union frame_map ppd;
+	unsigned int frame_num = 0;
+
+	bug_on(ring->type != PACKET_RX_RING);
+
+	pair_udp_open(udp_sock, PORT_BASE);
+
+	memset(&pfd, 0, sizeof(pfd));
+	pfd.fd = sock;
+	pfd.events = POLLIN | POLLERR;
+	pfd.revents = 0;
+
+	pair_udp_send(udp_sock, NUM_PACKETS);
+
+	while (total_packets < NUM_PACKETS * 2) {
+		while (__v1_v2_rx_kernel_ready(ring->rd[frame_num].iov_base,
+					       ring->version)) {
+			ppd.raw = ring->rd[frame_num].iov_base;
+
+			switch (ring->version) {
+			case TPACKET_V1:
+				test_payload((uint8_t *) ppd.raw + ppd.v1->tp_h.tp_mac,
+					     ppd.v1->tp_h.tp_snaplen);
+				total_bytes += ppd.v1->tp_h.tp_snaplen;
+				break;
+
+			case TPACKET_V2:
+				test_payload((uint8_t *) ppd.raw + ppd.v2->tp_h.tp_mac,
+					     ppd.v2->tp_h.tp_snaplen);
+				total_bytes += ppd.v2->tp_h.tp_snaplen;
+				break;
+			}
+
+			status_bar_update();
+			total_packets++;
+
+			__v1_v2_rx_user_ready(ppd.raw, ring->version);
+
+			frame_num = (frame_num + 1) % ring->rd_num;
+		}
+
+		poll(&pfd, 1, 1);
+	}
+
+	pair_udp_close(udp_sock);
+
+	if (total_packets != 2 * NUM_PACKETS) {
+		fprintf(stderr, "walk_v%d_rx: received %u out of %u pkts\n",
+			ring->version, total_packets, NUM_PACKETS);
+		exit(1);
+	}
+
+	fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, total_bytes >> 1);
+}
+
+static inline int __v1_tx_kernel_ready(struct tpacket_hdr *hdr)
+{
+	return !(hdr->tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING));
+}
+
+static inline void __v1_tx_user_ready(struct tpacket_hdr *hdr)
+{
+	hdr->tp_status = TP_STATUS_SEND_REQUEST;
+	__sync_synchronize();
+}
+
+static inline int __v2_tx_kernel_ready(struct tpacket2_hdr *hdr)
+{
+	return !(hdr->tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING));
+}
+
+static inline void __v2_tx_user_ready(struct tpacket2_hdr *hdr)
+{
+	hdr->tp_status = TP_STATUS_SEND_REQUEST;
+	__sync_synchronize();
+}
+
+static inline int __v3_tx_kernel_ready(struct tpacket3_hdr *hdr)
+{
+	return !(hdr->tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING));
+}
+
+static inline void __v3_tx_user_ready(struct tpacket3_hdr *hdr)
+{
+	hdr->tp_status = TP_STATUS_SEND_REQUEST;
+	__sync_synchronize();
+}
+
+static inline int __tx_kernel_ready(void *base, int version)
+{
+	switch (version) {
+	case TPACKET_V1:
+		return __v1_tx_kernel_ready(base);
+	case TPACKET_V2:
+		return __v2_tx_kernel_ready(base);
+	case TPACKET_V3:
+		return __v3_tx_kernel_ready(base);
+	default:
+		bug_on(1);
+		return 0;
+	}
+}
+
+static inline void __tx_user_ready(void *base, int version)
+{
+	switch (version) {
+	case TPACKET_V1:
+		__v1_tx_user_ready(base);
+		break;
+	case TPACKET_V2:
+		__v2_tx_user_ready(base);
+		break;
+	case TPACKET_V3:
+		__v3_tx_user_ready(base);
+		break;
+	}
+}
+
+static void __v1_v2_set_packet_loss_discard(int sock)
+{
+	int ret, discard = 1;
+
+	ret = setsockopt(sock, SOL_PACKET, PACKET_LOSS, (void *) &discard,
+			 sizeof(discard));
+	if (ret == -1) {
+		perror("setsockopt");
+		exit(1);
+	}
+}
+
+static inline void *get_next_frame(struct ring *ring, int n)
+{
+	uint8_t *f0 = ring->rd[0].iov_base;
+
+	switch (ring->version) {
+	case TPACKET_V1:
+	case TPACKET_V2:
+		return ring->rd[n].iov_base;
+	case TPACKET_V3:
+		return f0 + (n * ring->req3.tp_frame_size);
+	default:
+		bug_on(1);
+	}
+}
+
+static void walk_tx(int sock, struct ring *ring)
+{
+	struct pollfd pfd;
+	int rcv_sock, ret;
+	size_t packet_len;
+	union frame_map ppd;
+	char packet[1024];
+	unsigned int frame_num = 0, got = 0;
+	struct sockaddr_ll ll = {
+		.sll_family = PF_PACKET,
+		.sll_halen = ETH_ALEN,
+	};
+	int nframes;
+
+	/* TPACKET_V{1,2} sets up the ring->rd* related variables based
+	 * on frames (e.g., rd_num is tp_frame_nr) whereas V3 sets these
+	 * up based on blocks (e.g, rd_num is  tp_block_nr)
+	 */
+	if (ring->version <= TPACKET_V2)
+		nframes = ring->rd_num;
+	else
+		nframes = ring->req3.tp_frame_nr;
+
+	bug_on(ring->type != PACKET_TX_RING);
+	bug_on(nframes < NUM_PACKETS);
+
+	rcv_sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
+	if (rcv_sock == -1) {
+		perror("socket");
+		exit(1);
+	}
+
+	pair_udp_setfilter(rcv_sock);
+
+	ll.sll_ifindex = if_nametoindex("lo");
+	ret = bind(rcv_sock, (struct sockaddr *) &ll, sizeof(ll));
+	if (ret == -1) {
+		perror("bind");
+		exit(1);
+	}
+
+	memset(&pfd, 0, sizeof(pfd));
+	pfd.fd = sock;
+	pfd.events = POLLOUT | POLLERR;
+	pfd.revents = 0;
+
+	total_packets = NUM_PACKETS;
+	create_payload(packet, &packet_len);
+
+	while (total_packets > 0) {
+		void *next = get_next_frame(ring, frame_num);
+
+		while (__tx_kernel_ready(next, ring->version) &&
+		       total_packets > 0) {
+			ppd.raw = next;
+
+			switch (ring->version) {
+			case TPACKET_V1:
+				ppd.v1->tp_h.tp_snaplen = packet_len;
+				ppd.v1->tp_h.tp_len = packet_len;
+
+				memcpy((uint8_t *) ppd.raw + TPACKET_HDRLEN -
+				       sizeof(struct sockaddr_ll), packet,
+				       packet_len);
+				total_bytes += ppd.v1->tp_h.tp_snaplen;
+				break;
+
+			case TPACKET_V2:
+				ppd.v2->tp_h.tp_snaplen = packet_len;
+				ppd.v2->tp_h.tp_len = packet_len;
+
+				memcpy((uint8_t *) ppd.raw + TPACKET2_HDRLEN -
+				       sizeof(struct sockaddr_ll), packet,
+				       packet_len);
+				total_bytes += ppd.v2->tp_h.tp_snaplen;
+				break;
+			case TPACKET_V3: {
+				struct tpacket3_hdr *tx = next;
+
+				tx->tp_snaplen = packet_len;
+				tx->tp_len = packet_len;
+				tx->tp_next_offset = 0;
+
+				memcpy((uint8_t *)tx + TPACKET3_HDRLEN -
+				       sizeof(struct sockaddr_ll), packet,
+				       packet_len);
+				total_bytes += tx->tp_snaplen;
+				break;
+			}
+			}
+
+			status_bar_update();
+			total_packets--;
+
+			__tx_user_ready(next, ring->version);
+
+			frame_num = (frame_num + 1) % nframes;
+		}
+
+		poll(&pfd, 1, 1);
+	}
+
+	bug_on(total_packets != 0);
+
+	ret = sendto(sock, NULL, 0, 0, NULL, 0);
+	if (ret == -1) {
+		perror("sendto");
+		exit(1);
+	}
+
+	while ((ret = recvfrom(rcv_sock, packet, sizeof(packet),
+			       0, NULL, NULL)) > 0 &&
+	       total_packets < NUM_PACKETS) {
+		got += ret;
+		test_payload(packet, ret);
+
+		status_bar_update();
+		total_packets++;
+	}
+
+	close(rcv_sock);
+
+	if (total_packets != NUM_PACKETS) {
+		fprintf(stderr, "walk_v%d_rx: received %u out of %u pkts\n",
+			ring->version, total_packets, NUM_PACKETS);
+		exit(1);
+	}
+
+	fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, got);
+}
+
+static void walk_v1_v2(int sock, struct ring *ring)
+{
+	if (ring->type == PACKET_RX_RING)
+		walk_v1_v2_rx(sock, ring);
+	else
+		walk_tx(sock, ring);
+}
+
+static uint64_t __v3_prev_block_seq_num = 0;
+
+void __v3_test_block_seq_num(struct block_desc *pbd)
+{
+	if (__v3_prev_block_seq_num + 1 != pbd->h1.seq_num) {
+		fprintf(stderr, "\nprev_block_seq_num:%"PRIu64", expected "
+			"seq:%"PRIu64" != actual seq:%"PRIu64"\n",
+			__v3_prev_block_seq_num, __v3_prev_block_seq_num + 1,
+			(uint64_t) pbd->h1.seq_num);
+		exit(1);
+	}
+
+	__v3_prev_block_seq_num = pbd->h1.seq_num;
+}
+
+static void __v3_test_block_len(struct block_desc *pbd, uint32_t bytes, int block_num)
+{
+	if (pbd->h1.num_pkts && bytes != pbd->h1.blk_len) {
+		fprintf(stderr, "\nblock:%u with %upackets, expected "
+			"len:%u != actual len:%u\n", block_num,
+			pbd->h1.num_pkts, bytes, pbd->h1.blk_len);
+		exit(1);
+	}
+}
+
+static void __v3_test_block_header(struct block_desc *pbd, const int block_num)
+{
+	if ((pbd->h1.block_status & TP_STATUS_USER) == 0) {
+		fprintf(stderr, "\nblock %u: not in TP_STATUS_USER\n", block_num);
+		exit(1);
+	}
+
+	__v3_test_block_seq_num(pbd);
+}
+
+static void __v3_walk_block(struct block_desc *pbd, const int block_num)
+{
+	int num_pkts = pbd->h1.num_pkts, i;
+	unsigned long bytes = 0, bytes_with_padding = ALIGN_8(sizeof(*pbd));
+	struct tpacket3_hdr *ppd;
+
+	__v3_test_block_header(pbd, block_num);
+
+	ppd = (struct tpacket3_hdr *) ((uint8_t *) pbd +
+				       pbd->h1.offset_to_first_pkt);
+
+	for (i = 0; i < num_pkts; ++i) {
+		bytes += ppd->tp_snaplen;
+
+		if (ppd->tp_next_offset)
+			bytes_with_padding += ppd->tp_next_offset;
+		else
+			bytes_with_padding += ALIGN_8(ppd->tp_snaplen + ppd->tp_mac);
+
+		test_payload((uint8_t *) ppd + ppd->tp_mac, ppd->tp_snaplen);
+
+		status_bar_update();
+		total_packets++;
+
+		ppd = (struct tpacket3_hdr *) ((uint8_t *) ppd + ppd->tp_next_offset);
+		__sync_synchronize();
+	}
+
+	__v3_test_block_len(pbd, bytes_with_padding, block_num);
+	total_bytes += bytes;
+}
+
+void __v3_flush_block(struct block_desc *pbd)
+{
+	pbd->h1.block_status = TP_STATUS_KERNEL;
+	__sync_synchronize();
+}
+
+static void walk_v3_rx(int sock, struct ring *ring)
+{
+	unsigned int block_num = 0;
+	struct pollfd pfd;
+	struct block_desc *pbd;
+	int udp_sock[2];
+
+	bug_on(ring->type != PACKET_RX_RING);
+
+	pair_udp_open(udp_sock, PORT_BASE);
+
+	memset(&pfd, 0, sizeof(pfd));
+	pfd.fd = sock;
+	pfd.events = POLLIN | POLLERR;
+	pfd.revents = 0;
+
+	pair_udp_send(udp_sock, NUM_PACKETS);
+
+	while (total_packets < NUM_PACKETS * 2) {
+		pbd = (struct block_desc *) ring->rd[block_num].iov_base;
+
+		while ((pbd->h1.block_status & TP_STATUS_USER) == 0)
+			poll(&pfd, 1, 1);
+
+		__v3_walk_block(pbd, block_num);
+		__v3_flush_block(pbd);
+
+		block_num = (block_num + 1) % ring->rd_num;
+	}
+
+	pair_udp_close(udp_sock);
+
+	if (total_packets != 2 * NUM_PACKETS) {
+		fprintf(stderr, "walk_v3_rx: received %u out of %u pkts\n",
+			total_packets, NUM_PACKETS);
+		exit(1);
+	}
+
+	fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, total_bytes >> 1);
+}
+
+static void walk_v3(int sock, struct ring *ring)
+{
+	if (ring->type == PACKET_RX_RING)
+		walk_v3_rx(sock, ring);
+	else
+		walk_tx(sock, ring);
+}
+
+static void __v1_v2_fill(struct ring *ring, unsigned int blocks)
+{
+	ring->req.tp_block_size = getpagesize() << 2;
+	ring->req.tp_frame_size = TPACKET_ALIGNMENT << 7;
+	ring->req.tp_block_nr = blocks;
+
+	ring->req.tp_frame_nr = ring->req.tp_block_size /
+				ring->req.tp_frame_size *
+				ring->req.tp_block_nr;
+
+	ring->mm_len = ring->req.tp_block_size * ring->req.tp_block_nr;
+	ring->walk = walk_v1_v2;
+	ring->rd_num = ring->req.tp_frame_nr;
+	ring->flen = ring->req.tp_frame_size;
+}
+
+static void __v3_fill(struct ring *ring, unsigned int blocks, int type)
+{
+	if (type == PACKET_RX_RING) {
+		ring->req3.tp_retire_blk_tov = 64;
+		ring->req3.tp_sizeof_priv = 0;
+		ring->req3.tp_feature_req_word = TP_FT_REQ_FILL_RXHASH;
+	}
+	ring->req3.tp_block_size = getpagesize() << 2;
+	ring->req3.tp_frame_size = TPACKET_ALIGNMENT << 7;
+	ring->req3.tp_block_nr = blocks;
+
+	ring->req3.tp_frame_nr = ring->req3.tp_block_size /
+				 ring->req3.tp_frame_size *
+				 ring->req3.tp_block_nr;
+
+	ring->mm_len = ring->req3.tp_block_size * ring->req3.tp_block_nr;
+	ring->walk = walk_v3;
+	ring->rd_num = ring->req3.tp_block_nr;
+	ring->flen = ring->req3.tp_block_size;
+}
+
+static void setup_ring(int sock, struct ring *ring, int version, int type)
+{
+	int ret = 0;
+	unsigned int blocks = 256;
+
+	ring->type = type;
+	ring->version = version;
+
+	switch (version) {
+	case TPACKET_V1:
+	case TPACKET_V2:
+		if (type == PACKET_TX_RING)
+			__v1_v2_set_packet_loss_discard(sock);
+		__v1_v2_fill(ring, blocks);
+		ret = setsockopt(sock, SOL_PACKET, type, &ring->req,
+				 sizeof(ring->req));
+		break;
+
+	case TPACKET_V3:
+		__v3_fill(ring, blocks, type);
+		ret = setsockopt(sock, SOL_PACKET, type, &ring->req3,
+				 sizeof(ring->req3));
+		break;
+	}
+
+	if (ret == -1) {
+		perror("setsockopt");
+		exit(1);
+	}
+
+	ring->rd_len = ring->rd_num * sizeof(*ring->rd);
+	ring->rd = malloc(ring->rd_len);
+	if (ring->rd == NULL) {
+		perror("malloc");
+		exit(1);
+	}
+
+	total_packets = 0;
+	total_bytes = 0;
+}
+
+static void mmap_ring(int sock, struct ring *ring)
+{
+	int i;
+
+	ring->mm_space = mmap(0, ring->mm_len, PROT_READ | PROT_WRITE,
+			      MAP_SHARED | MAP_LOCKED | MAP_POPULATE, sock, 0);
+	if (ring->mm_space == MAP_FAILED) {
+		perror("mmap");
+		exit(1);
+	}
+
+	memset(ring->rd, 0, ring->rd_len);
+	for (i = 0; i < ring->rd_num; ++i) {
+		ring->rd[i].iov_base = ring->mm_space + (i * ring->flen);
+		ring->rd[i].iov_len = ring->flen;
+	}
+}
+
+static void bind_ring(int sock, struct ring *ring)
+{
+	int ret;
+
+	pair_udp_setfilter(sock);
+
+	ring->ll.sll_family = PF_PACKET;
+	ring->ll.sll_protocol = htons(ETH_P_ALL);
+	ring->ll.sll_ifindex = if_nametoindex("lo");
+	ring->ll.sll_hatype = 0;
+	ring->ll.sll_pkttype = 0;
+	ring->ll.sll_halen = 0;
+
+	ret = bind(sock, (struct sockaddr *) &ring->ll, sizeof(ring->ll));
+	if (ret == -1) {
+		perror("bind");
+		exit(1);
+	}
+}
+
+static void walk_ring(int sock, struct ring *ring)
+{
+	ring->walk(sock, ring);
+}
+
+static void unmap_ring(int sock, struct ring *ring)
+{
+	munmap(ring->mm_space, ring->mm_len);
+	free(ring->rd);
+}
+
+static int test_kernel_bit_width(void)
+{
+	char in[512], *ptr;
+	int num = 0, fd;
+	ssize_t ret;
+
+	fd = open("/proc/kallsyms", O_RDONLY);
+	if (fd == -1) {
+		perror("open");
+		exit(1);
+	}
+
+	ret = read(fd, in, sizeof(in));
+	if (ret <= 0) {
+		perror("read");
+		exit(1);
+	}
+
+	close(fd);
+
+	ptr = in;
+	while(!isspace(*ptr)) {
+		num++;
+		ptr++;
+	}
+
+	return num * 4;
+}
+
+static int test_user_bit_width(void)
+{
+	return __WORDSIZE;
+}
+
+static const char *tpacket_str[] = {
+	[TPACKET_V1] = "TPACKET_V1",
+	[TPACKET_V2] = "TPACKET_V2",
+	[TPACKET_V3] = "TPACKET_V3",
+};
+
+static const char *type_str[] = {
+	[PACKET_RX_RING] = "PACKET_RX_RING",
+	[PACKET_TX_RING] = "PACKET_TX_RING",
+};
+
+static int test_tpacket(int version, int type)
+{
+	int sock;
+	struct ring ring;
+
+	fprintf(stderr, "test: %s with %s ", tpacket_str[version],
+		type_str[type]);
+	fflush(stderr);
+
+	if (version == TPACKET_V1 &&
+	    test_kernel_bit_width() != test_user_bit_width()) {
+		fprintf(stderr, "test: skip %s %s since user and kernel "
+			"space have different bit width\n",
+			tpacket_str[version], type_str[type]);
+		return KSFT_SKIP;
+	}
+
+	sock = pfsocket(version);
+	memset(&ring, 0, sizeof(ring));
+	setup_ring(sock, &ring, version, type);
+	mmap_ring(sock, &ring);
+	bind_ring(sock, &ring);
+	walk_ring(sock, &ring);
+	unmap_ring(sock, &ring);
+	close(sock);
+
+	fprintf(stderr, "\n");
+	return 0;
+}
+
+int main(void)
+{
+	int ret = 0;
+
+	ret |= test_tpacket(TPACKET_V1, PACKET_RX_RING);
+	ret |= test_tpacket(TPACKET_V1, PACKET_TX_RING);
+
+	ret |= test_tpacket(TPACKET_V2, PACKET_RX_RING);
+	ret |= test_tpacket(TPACKET_V2, PACKET_TX_RING);
+
+	ret |= test_tpacket(TPACKET_V3, PACKET_RX_RING);
+	ret |= test_tpacket(TPACKET_V3, PACKET_TX_RING);
+
+	if (ret)
+		return 1;
+
+	printf("OK. All tests passed\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/reuseaddr_conflict.c b/tools/testing/selftests/net/reuseaddr_conflict.c
new file mode 100644
index 000000000..7c5b12664
--- /dev/null
+++ b/tools/testing/selftests/net/reuseaddr_conflict.c
@@ -0,0 +1,114 @@
+/*
+ * Test for the regression introduced by
+ *
+ * b9470c27607b ("inet: kill smallest_size and smallest_port")
+ *
+ * If we open an ipv4 socket on a port with reuseaddr we shouldn't reset the tb
+ * when we open the ipv6 conterpart, which is what was happening previously.
+ */
+#include <errno.h>
+#include <error.h>
+#include <arpa/inet.h>
+#include <netinet/in.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#define PORT 9999
+
+int open_port(int ipv6, int any)
+{
+	int fd = -1;
+	int reuseaddr = 1;
+	int v6only = 1;
+	int addrlen;
+	int ret = -1;
+	struct sockaddr *addr;
+	int family = ipv6 ? AF_INET6 : AF_INET;
+
+	struct sockaddr_in6 addr6 = {
+		.sin6_family = AF_INET6,
+		.sin6_port = htons(PORT),
+		.sin6_addr = in6addr_any
+	};
+	struct sockaddr_in addr4 = {
+		.sin_family = AF_INET,
+		.sin_port = htons(PORT),
+		.sin_addr.s_addr = any ? htonl(INADDR_ANY) : inet_addr("127.0.0.1"),
+	};
+
+
+	if (ipv6) {
+		addr = (struct sockaddr*)&addr6;
+		addrlen = sizeof(addr6);
+	} else {
+		addr = (struct sockaddr*)&addr4;
+		addrlen = sizeof(addr4);
+	}
+
+	if ((fd = socket(family, SOCK_STREAM, IPPROTO_TCP)) < 0) {
+		perror("socket");
+		goto out;
+	}
+
+	if (ipv6 && setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, (void*)&v6only,
+			       sizeof(v6only)) < 0) {
+		perror("setsockopt IPV6_V6ONLY");
+		goto out;
+	}
+
+	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &reuseaddr,
+		       sizeof(reuseaddr)) < 0) {
+		perror("setsockopt SO_REUSEADDR");
+		goto out;
+	}
+
+	if (bind(fd, addr, addrlen) < 0) {
+		perror("bind");
+		goto out;
+	}
+
+	if (any)
+		return fd;
+
+	if (listen(fd, 1) < 0) {
+		perror("listen");
+		goto out;
+	}
+	return fd;
+out:
+	close(fd);
+	return ret;
+}
+
+int main(void)
+{
+	int listenfd;
+	int fd1, fd2;
+
+	fprintf(stderr, "Opening 127.0.0.1:%d\n", PORT);
+	listenfd = open_port(0, 0);
+	if (listenfd < 0)
+		error(1, errno, "Couldn't open listen socket");
+	fprintf(stderr, "Opening INADDR_ANY:%d\n", PORT);
+	fd1 = open_port(0, 1);
+	if (fd1 >= 0)
+		error(1, 0, "Was allowed to create an ipv4 reuseport on a already bound non-reuseport socket");
+	fprintf(stderr, "Opening in6addr_any:%d\n", PORT);
+	fd1 = open_port(1, 1);
+	if (fd1 < 0)
+		error(1, errno, "Couldn't open ipv6 reuseport");
+	fprintf(stderr, "Opening INADDR_ANY:%d\n", PORT);
+	fd2 = open_port(0, 1);
+	if (fd2 >= 0)
+		error(1, 0, "Was allowed to create an ipv4 reuseport on a already bound non-reuseport socket");
+	close(fd1);
+	fprintf(stderr, "Opening INADDR_ANY:%d after closing ipv6 socket\n", PORT);
+	fd1 = open_port(0, 1);
+	if (fd1 >= 0)
+		error(1, 0, "Was allowed to create an ipv4 reuseport on an already bound non-reuseport socket with no ipv6");
+	fprintf(stderr, "Success");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/reuseaddr_ports_exhausted.c b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c
new file mode 100644
index 000000000..066efd30e
--- /dev/null
+++ b/tools/testing/selftests/net/reuseaddr_ports_exhausted.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Check if we can fully utilize 4-tuples for connect().
+ *
+ * Rules to bind sockets to the same port when all ephemeral ports are
+ * exhausted.
+ *
+ *   1. if there are TCP_LISTEN sockets on the port, fail to bind.
+ *   2. if there are sockets without SO_REUSEADDR, fail to bind.
+ *   3. if SO_REUSEADDR is disabled, fail to bind.
+ *   4. if SO_REUSEADDR is enabled and SO_REUSEPORT is disabled,
+ *        succeed to bind.
+ *   5. if SO_REUSEADDR and SO_REUSEPORT are enabled and
+ *        there is no socket having the both options and the same EUID,
+ *        succeed to bind.
+ *   6. fail to bind.
+ *
+ * Author: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
+ */
+#include <arpa/inet.h>
+#include <netinet/in.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include "../kselftest_harness.h"
+
+struct reuse_opts {
+	int reuseaddr[2];
+	int reuseport[2];
+};
+
+struct reuse_opts unreusable_opts[12] = {
+	{{0, 0}, {0, 0}},
+	{{0, 0}, {0, 1}},
+	{{0, 0}, {1, 0}},
+	{{0, 0}, {1, 1}},
+	{{0, 1}, {0, 0}},
+	{{0, 1}, {0, 1}},
+	{{0, 1}, {1, 0}},
+	{{0, 1}, {1, 1}},
+	{{1, 0}, {0, 0}},
+	{{1, 0}, {0, 1}},
+	{{1, 0}, {1, 0}},
+	{{1, 0}, {1, 1}},
+};
+
+struct reuse_opts reusable_opts[4] = {
+	{{1, 1}, {0, 0}},
+	{{1, 1}, {0, 1}},
+	{{1, 1}, {1, 0}},
+	{{1, 1}, {1, 1}},
+};
+
+int bind_port(struct __test_metadata *_metadata, int reuseaddr, int reuseport)
+{
+	struct sockaddr_in local_addr;
+	int len = sizeof(local_addr);
+	int fd, ret;
+
+	fd = socket(AF_INET, SOCK_STREAM, 0);
+	ASSERT_NE(-1, fd) TH_LOG("failed to open socket.");
+
+	ret = setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &reuseaddr, sizeof(int));
+	ASSERT_EQ(0, ret) TH_LOG("failed to setsockopt: SO_REUSEADDR.");
+
+	ret = setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &reuseport, sizeof(int));
+	ASSERT_EQ(0, ret) TH_LOG("failed to setsockopt: SO_REUSEPORT.");
+
+	local_addr.sin_family = AF_INET;
+	local_addr.sin_addr.s_addr = inet_addr("127.0.0.1");
+	local_addr.sin_port = 0;
+
+	if (bind(fd, (struct sockaddr *)&local_addr, len) == -1) {
+		close(fd);
+		return -1;
+	}
+
+	return fd;
+}
+
+TEST(reuseaddr_ports_exhausted_unreusable)
+{
+	struct reuse_opts *opts;
+	int i, j, fd[2];
+
+	for (i = 0; i < 12; i++) {
+		opts = &unreusable_opts[i];
+
+		for (j = 0; j < 2; j++)
+			fd[j] = bind_port(_metadata, opts->reuseaddr[j], opts->reuseport[j]);
+
+		ASSERT_NE(-1, fd[0]) TH_LOG("failed to bind.");
+		EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind.");
+
+		for (j = 0; j < 2; j++)
+			if (fd[j] != -1)
+				close(fd[j]);
+	}
+}
+
+TEST(reuseaddr_ports_exhausted_reusable_same_euid)
+{
+	struct reuse_opts *opts;
+	int i, j, fd[2];
+
+	for (i = 0; i < 4; i++) {
+		opts = &reusable_opts[i];
+
+		for (j = 0; j < 2; j++)
+			fd[j] = bind_port(_metadata, opts->reuseaddr[j], opts->reuseport[j]);
+
+		ASSERT_NE(-1, fd[0]) TH_LOG("failed to bind.");
+
+		if (opts->reuseport[0] && opts->reuseport[1]) {
+			EXPECT_EQ(-1, fd[1]) TH_LOG("should fail to bind because both sockets succeed to be listened.");
+		} else {
+			EXPECT_NE(-1, fd[1]) TH_LOG("should succeed to bind to connect to different destinations.");
+		}
+
+		for (j = 0; j < 2; j++)
+			if (fd[j] != -1)
+				close(fd[j]);
+	}
+}
+
+TEST(reuseaddr_ports_exhausted_reusable_different_euid)
+{
+	struct reuse_opts *opts;
+	int i, j, ret, fd[2];
+	uid_t euid[2] = {10, 20};
+
+	for (i = 0; i < 4; i++) {
+		opts = &reusable_opts[i];
+
+		for (j = 0; j < 2; j++) {
+			ret = seteuid(euid[j]);
+			ASSERT_EQ(0, ret) TH_LOG("failed to seteuid: %d.", euid[j]);
+
+			fd[j] = bind_port(_metadata, opts->reuseaddr[j], opts->reuseport[j]);
+
+			ret = seteuid(0);
+			ASSERT_EQ(0, ret) TH_LOG("failed to seteuid: 0.");
+		}
+
+		ASSERT_NE(-1, fd[0]) TH_LOG("failed to bind.");
+		EXPECT_NE(-1, fd[1]) TH_LOG("should succeed to bind because one socket can be bound in each euid.");
+
+		if (fd[1] != -1) {
+			ret = listen(fd[0], 5);
+			ASSERT_EQ(0, ret) TH_LOG("failed to listen.");
+
+			ret = listen(fd[1], 5);
+			EXPECT_EQ(-1, ret) TH_LOG("should fail to listen because only one uid reserves the port in TCP_LISTEN.");
+		}
+
+		for (j = 0; j < 2; j++)
+			if (fd[j] != -1)
+				close(fd[j]);
+	}
+}
+
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/net/reuseaddr_ports_exhausted.sh b/tools/testing/selftests/net/reuseaddr_ports_exhausted.sh
new file mode 100755
index 000000000..20e3a2913
--- /dev/null
+++ b/tools/testing/selftests/net/reuseaddr_ports_exhausted.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run tests when all ephemeral ports are exhausted.
+#
+# Author: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
+
+set +x
+set -e
+
+readonly NETNS="ns-$(mktemp -u XXXXXX)"
+
+setup() {
+	ip netns add "${NETNS}"
+	ip -netns "${NETNS}" link set lo up
+	ip netns exec "${NETNS}" \
+		sysctl -w net.ipv4.ip_local_port_range="32768 32768" \
+		> /dev/null 2>&1
+	ip netns exec "${NETNS}" \
+		sysctl -w net.ipv4.ip_autobind_reuse=1 > /dev/null 2>&1
+}
+
+cleanup() {
+	ip netns del "${NETNS}"
+}
+
+trap cleanup EXIT
+setup
+
+do_test() {
+	ip netns exec "${NETNS}" ./reuseaddr_ports_exhausted
+}
+
+do_test
+echo "tests done"
diff --git a/tools/testing/selftests/net/reuseport_addr_any.c b/tools/testing/selftests/net/reuseport_addr_any.c
new file mode 100644
index 000000000..b8475cb29
--- /dev/null
+++ b/tools/testing/selftests/net/reuseport_addr_any.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* Test that sockets listening on a specific address are preferred
+ * over sockets listening on addr_any.
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <linux/dccp.h>
+#include <linux/in.h>
+#include <linux/unistd.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/epoll.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <unistd.h>
+
+#ifndef SOL_DCCP
+#define SOL_DCCP 269
+#endif
+
+static const char *IP4_ADDR = "127.0.0.1";
+static const char *IP6_ADDR = "::1";
+static const char *IP4_MAPPED6 = "::ffff:127.0.0.1";
+
+static const int PORT = 8888;
+
+static void build_rcv_fd(int family, int proto, int *rcv_fds, int count,
+			 const char *addr_str)
+{
+	struct sockaddr_in  addr4 = {0};
+	struct sockaddr_in6 addr6 = {0};
+	struct sockaddr *addr;
+	int opt, i, sz;
+
+	memset(&addr, 0, sizeof(addr));
+
+	switch (family) {
+	case AF_INET:
+		addr4.sin_family = family;
+		if (!addr_str)
+			addr4.sin_addr.s_addr = htonl(INADDR_ANY);
+		else if (!inet_pton(family, addr_str, &addr4.sin_addr.s_addr))
+			error(1, errno, "inet_pton failed: %s", addr_str);
+		addr4.sin_port = htons(PORT);
+		sz = sizeof(addr4);
+		addr = (struct sockaddr *)&addr4;
+		break;
+	case AF_INET6:
+		addr6.sin6_family = AF_INET6;
+		if (!addr_str)
+			addr6.sin6_addr = in6addr_any;
+		else if (!inet_pton(family, addr_str, &addr6.sin6_addr))
+			error(1, errno, "inet_pton failed: %s", addr_str);
+		addr6.sin6_port = htons(PORT);
+		sz = sizeof(addr6);
+		addr = (struct sockaddr *)&addr6;
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+		/* clang does not recognize error() above as terminating
+		 * the program, so it complains that saddr, sz are
+		 * not initialized when this code path is taken. Silence it.
+		 */
+		return;
+	}
+
+	for (i = 0; i < count; ++i) {
+		rcv_fds[i] = socket(family, proto, 0);
+		if (rcv_fds[i] < 0)
+			error(1, errno, "failed to create receive socket");
+
+		opt = 1;
+		if (setsockopt(rcv_fds[i], SOL_SOCKET, SO_REUSEPORT, &opt,
+			       sizeof(opt)))
+			error(1, errno, "failed to set SO_REUSEPORT");
+
+		if (bind(rcv_fds[i], addr, sz))
+			error(1, errno, "failed to bind receive socket");
+
+		if (proto == SOCK_STREAM && listen(rcv_fds[i], 10))
+			error(1, errno, "tcp: failed to listen on receive port");
+		else if (proto == SOCK_DCCP) {
+			if (setsockopt(rcv_fds[i], SOL_DCCP,
+					DCCP_SOCKOPT_SERVICE,
+					&(int) {htonl(42)}, sizeof(int)))
+				error(1, errno, "failed to setsockopt");
+
+			if (listen(rcv_fds[i], 10))
+				error(1, errno, "dccp: failed to listen on receive port");
+		}
+	}
+}
+
+static int connect_and_send(int family, int proto)
+{
+	struct sockaddr_in  saddr4 = {0};
+	struct sockaddr_in  daddr4 = {0};
+	struct sockaddr_in6 saddr6 = {0};
+	struct sockaddr_in6 daddr6 = {0};
+	struct sockaddr *saddr, *daddr;
+	int fd, sz;
+
+	switch (family) {
+	case AF_INET:
+		saddr4.sin_family = AF_INET;
+		saddr4.sin_addr.s_addr = htonl(INADDR_ANY);
+		saddr4.sin_port = 0;
+
+		daddr4.sin_family = AF_INET;
+		if (!inet_pton(family, IP4_ADDR, &daddr4.sin_addr.s_addr))
+			error(1, errno, "inet_pton failed: %s", IP4_ADDR);
+		daddr4.sin_port = htons(PORT);
+
+		sz = sizeof(saddr4);
+		saddr = (struct sockaddr *)&saddr4;
+		daddr = (struct sockaddr *)&daddr4;
+	break;
+	case AF_INET6:
+		saddr6.sin6_family = AF_INET6;
+		saddr6.sin6_addr = in6addr_any;
+
+		daddr6.sin6_family = AF_INET6;
+		if (!inet_pton(family, IP6_ADDR, &daddr6.sin6_addr))
+			error(1, errno, "inet_pton failed: %s", IP6_ADDR);
+		daddr6.sin6_port = htons(PORT);
+
+		sz = sizeof(saddr6);
+		saddr = (struct sockaddr *)&saddr6;
+		daddr = (struct sockaddr *)&daddr6;
+	break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+		/* clang does not recognize error() above as terminating
+		 * the program, so it complains that saddr, daddr, sz are
+		 * not initialized when this code path is taken. Silence it.
+		 */
+		return -1;
+	}
+
+	fd = socket(family, proto, 0);
+	if (fd < 0)
+		error(1, errno, "failed to create send socket");
+
+	if (proto == SOCK_DCCP &&
+		setsockopt(fd, SOL_DCCP, DCCP_SOCKOPT_SERVICE,
+				&(int){htonl(42)}, sizeof(int)))
+		error(1, errno, "failed to setsockopt");
+
+	if (bind(fd, saddr, sz))
+		error(1, errno, "failed to bind send socket");
+
+	if (connect(fd, daddr, sz))
+		error(1, errno, "failed to connect send socket");
+
+	if (send(fd, "a", 1, 0) < 0)
+		error(1, errno, "failed to send message");
+
+	return fd;
+}
+
+static int receive_once(int epfd, int proto)
+{
+	struct epoll_event ev;
+	int i, fd;
+	char buf[8];
+
+	i = epoll_wait(epfd, &ev, 1, 3);
+	if (i < 0)
+		error(1, errno, "epoll_wait failed");
+
+	if (proto == SOCK_STREAM || proto == SOCK_DCCP) {
+		fd = accept(ev.data.fd, NULL, NULL);
+		if (fd < 0)
+			error(1, errno, "failed to accept");
+		i = recv(fd, buf, sizeof(buf), 0);
+		close(fd);
+	} else {
+		i = recv(ev.data.fd, buf, sizeof(buf), 0);
+	}
+
+	if (i < 0)
+		error(1, errno, "failed to recv");
+
+	return ev.data.fd;
+}
+
+static void test(int *rcv_fds, int count, int family, int proto, int fd)
+{
+	struct epoll_event ev;
+	int epfd, i, send_fd, recv_fd;
+
+	epfd = epoll_create(1);
+	if (epfd < 0)
+		error(1, errno, "failed to create epoll");
+
+	ev.events = EPOLLIN;
+	for (i = 0; i < count; ++i) {
+		ev.data.fd = rcv_fds[i];
+		if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fds[i], &ev))
+			error(1, errno, "failed to register sock epoll");
+	}
+
+	send_fd = connect_and_send(family, proto);
+
+	recv_fd = receive_once(epfd, proto);
+	if (recv_fd != fd)
+		error(1, 0, "received on an unexpected socket");
+
+	close(send_fd);
+	close(epfd);
+}
+
+
+static void run_one_test(int fam_send, int fam_rcv, int proto,
+			 const char *addr_str)
+{
+	/* Below we test that a socket listening on a specific address
+	 * is always selected in preference over a socket listening
+	 * on addr_any. Bugs where this is not the case often result
+	 * in sockets created first or last to get picked. So below
+	 * we make sure that there are always addr_any sockets created
+	 * before and after a specific socket is created.
+	 */
+	int rcv_fds[10], i;
+
+	build_rcv_fd(AF_INET, proto, rcv_fds, 2, NULL);
+	build_rcv_fd(AF_INET6, proto, rcv_fds + 2, 2, NULL);
+	build_rcv_fd(fam_rcv, proto, rcv_fds + 4, 1, addr_str);
+	build_rcv_fd(AF_INET, proto, rcv_fds + 5, 2, NULL);
+	build_rcv_fd(AF_INET6, proto, rcv_fds + 7, 2, NULL);
+	test(rcv_fds, 9, fam_send, proto, rcv_fds[4]);
+	for (i = 0; i < 9; ++i)
+		close(rcv_fds[i]);
+	fprintf(stderr, "pass\n");
+}
+
+static void test_proto(int proto, const char *proto_str)
+{
+	if (proto == SOCK_DCCP) {
+		int test_fd;
+
+		test_fd = socket(AF_INET, proto, 0);
+		if (test_fd < 0) {
+			if (errno == ESOCKTNOSUPPORT) {
+				fprintf(stderr, "DCCP not supported: skipping DCCP tests\n");
+				return;
+			} else
+				error(1, errno, "failed to create a DCCP socket");
+		}
+		close(test_fd);
+	}
+
+	fprintf(stderr, "%s IPv4 ... ", proto_str);
+	run_one_test(AF_INET, AF_INET, proto, IP4_ADDR);
+
+	fprintf(stderr, "%s IPv6 ... ", proto_str);
+	run_one_test(AF_INET6, AF_INET6, proto, IP6_ADDR);
+
+	fprintf(stderr, "%s IPv4 mapped to IPv6 ... ", proto_str);
+	run_one_test(AF_INET, AF_INET6, proto, IP4_MAPPED6);
+}
+
+int main(void)
+{
+	test_proto(SOCK_DGRAM, "UDP");
+	test_proto(SOCK_STREAM, "TCP");
+	test_proto(SOCK_DCCP, "DCCP");
+
+	fprintf(stderr, "SUCCESS\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/reuseport_addr_any.sh b/tools/testing/selftests/net/reuseport_addr_any.sh
new file mode 100755
index 000000000..104592f62
--- /dev/null
+++ b/tools/testing/selftests/net/reuseport_addr_any.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+./in_netns.sh ./reuseport_addr_any
diff --git a/tools/testing/selftests/net/reuseport_bpf.c b/tools/testing/selftests/net/reuseport_bpf.c
new file mode 100644
index 000000000..b0cc082fb
--- /dev/null
+++ b/tools/testing/selftests/net/reuseport_bpf.c
@@ -0,0 +1,641 @@
+/*
+ * Test functionality of BPF filters for SO_REUSEPORT.  The tests below will use
+ * a BPF program (both classic and extended) to read the first word from an
+ * incoming packet (expected to be in network byte-order), calculate a modulus
+ * of that number, and then dispatch the packet to the Nth socket using the
+ * result.  These tests are run for each supported address family and protocol.
+ * Additionally, a few edge cases in the implementation are tested.
+ */
+
+#include <errno.h>
+#include <error.h>
+#include <fcntl.h>
+#include <linux/bpf.h>
+#include <linux/filter.h>
+#include <linux/unistd.h>
+#include <netinet/in.h>
+#include <netinet/tcp.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/epoll.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/resource.h>
+#include <unistd.h>
+
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+#endif
+
+struct test_params {
+	int recv_family;
+	int send_family;
+	int protocol;
+	size_t recv_socks;
+	uint16_t recv_port;
+	uint16_t send_port_min;
+};
+
+static size_t sockaddr_size(void)
+{
+	return sizeof(struct sockaddr_storage);
+}
+
+static struct sockaddr *new_any_sockaddr(int family, uint16_t port)
+{
+	struct sockaddr_storage *addr;
+	struct sockaddr_in *addr4;
+	struct sockaddr_in6 *addr6;
+
+	addr = malloc(sizeof(struct sockaddr_storage));
+	memset(addr, 0, sizeof(struct sockaddr_storage));
+
+	switch (family) {
+	case AF_INET:
+		addr4 = (struct sockaddr_in *)addr;
+		addr4->sin_family = AF_INET;
+		addr4->sin_addr.s_addr = htonl(INADDR_ANY);
+		addr4->sin_port = htons(port);
+		break;
+	case AF_INET6:
+		addr6 = (struct sockaddr_in6 *)addr;
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_addr = in6addr_any;
+		addr6->sin6_port = htons(port);
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+	}
+	return (struct sockaddr *)addr;
+}
+
+static struct sockaddr *new_loopback_sockaddr(int family, uint16_t port)
+{
+	struct sockaddr *addr = new_any_sockaddr(family, port);
+	struct sockaddr_in *addr4;
+	struct sockaddr_in6 *addr6;
+
+	switch (family) {
+	case AF_INET:
+		addr4 = (struct sockaddr_in *)addr;
+		addr4->sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+		break;
+	case AF_INET6:
+		addr6 = (struct sockaddr_in6 *)addr;
+		addr6->sin6_addr = in6addr_loopback;
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+	}
+	return addr;
+}
+
+static void attach_ebpf(int fd, uint16_t mod)
+{
+	static char bpf_log_buf[65536];
+	static const char bpf_license[] = "GPL";
+
+	int bpf_fd;
+	const struct bpf_insn prog[] = {
+		/* BPF_MOV64_REG(BPF_REG_6, BPF_REG_1) */
+		{ BPF_ALU64 | BPF_MOV | BPF_X, BPF_REG_6, BPF_REG_1, 0, 0 },
+		/* BPF_LD_ABS(BPF_W, 0) R0 = (uint32_t)skb[0] */
+		{ BPF_LD | BPF_ABS | BPF_W, 0, 0, 0, 0 },
+		/* BPF_ALU64_IMM(BPF_MOD, BPF_REG_0, mod) */
+		{ BPF_ALU64 | BPF_MOD | BPF_K, BPF_REG_0, 0, 0, mod },
+		/* BPF_EXIT_INSN() */
+		{ BPF_JMP | BPF_EXIT, 0, 0, 0, 0 }
+	};
+	union bpf_attr attr;
+
+	memset(&attr, 0, sizeof(attr));
+	attr.prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
+	attr.insn_cnt = ARRAY_SIZE(prog);
+	attr.insns = (unsigned long) &prog;
+	attr.license = (unsigned long) &bpf_license;
+	attr.log_buf = (unsigned long) &bpf_log_buf;
+	attr.log_size = sizeof(bpf_log_buf);
+	attr.log_level = 1;
+	attr.kern_version = 0;
+
+	bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD, &attr, sizeof(attr));
+	if (bpf_fd < 0)
+		error(1, errno, "ebpf error. log:\n%s\n", bpf_log_buf);
+
+	if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_EBPF, &bpf_fd,
+			sizeof(bpf_fd)))
+		error(1, errno, "failed to set SO_ATTACH_REUSEPORT_EBPF");
+
+	close(bpf_fd);
+}
+
+static void attach_cbpf(int fd, uint16_t mod)
+{
+	struct sock_filter code[] = {
+		/* A = (uint32_t)skb[0] */
+		{ BPF_LD  | BPF_W | BPF_ABS, 0, 0, 0 },
+		/* A = A % mod */
+		{ BPF_ALU | BPF_MOD, 0, 0, mod },
+		/* return A */
+		{ BPF_RET | BPF_A, 0, 0, 0 },
+	};
+	struct sock_fprog p = {
+		.len = ARRAY_SIZE(code),
+		.filter = code,
+	};
+
+	if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_CBPF, &p, sizeof(p)))
+		error(1, errno, "failed to set SO_ATTACH_REUSEPORT_CBPF");
+}
+
+static void build_recv_group(const struct test_params p, int fd[], uint16_t mod,
+			     void (*attach_bpf)(int, uint16_t))
+{
+	struct sockaddr * const addr =
+		new_any_sockaddr(p.recv_family, p.recv_port);
+	int i, opt;
+
+	for (i = 0; i < p.recv_socks; ++i) {
+		fd[i] = socket(p.recv_family, p.protocol, 0);
+		if (fd[i] < 0)
+			error(1, errno, "failed to create recv %d", i);
+
+		opt = 1;
+		if (setsockopt(fd[i], SOL_SOCKET, SO_REUSEPORT, &opt,
+			       sizeof(opt)))
+			error(1, errno, "failed to set SO_REUSEPORT on %d", i);
+
+		if (i == 0)
+			attach_bpf(fd[i], mod);
+
+		if (bind(fd[i], addr, sockaddr_size()))
+			error(1, errno, "failed to bind recv socket %d", i);
+
+		if (p.protocol == SOCK_STREAM) {
+			opt = 4;
+			if (setsockopt(fd[i], SOL_TCP, TCP_FASTOPEN, &opt,
+				       sizeof(opt)))
+				error(1, errno,
+				      "failed to set TCP_FASTOPEN on %d", i);
+			if (listen(fd[i], p.recv_socks * 10))
+				error(1, errno, "failed to listen on socket");
+		}
+	}
+	free(addr);
+}
+
+static void send_from(struct test_params p, uint16_t sport, char *buf,
+		      size_t len)
+{
+	struct sockaddr * const saddr = new_any_sockaddr(p.send_family, sport);
+	struct sockaddr * const daddr =
+		new_loopback_sockaddr(p.send_family, p.recv_port);
+	const int fd = socket(p.send_family, p.protocol, 0), one = 1;
+
+	if (fd < 0)
+		error(1, errno, "failed to create send socket");
+
+	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)))
+		error(1, errno, "failed to set reuseaddr");
+
+	if (bind(fd, saddr, sockaddr_size()))
+		error(1, errno, "failed to bind send socket");
+
+	if (sendto(fd, buf, len, MSG_FASTOPEN, daddr, sockaddr_size()) < 0)
+		error(1, errno, "failed to send message");
+
+	close(fd);
+	free(saddr);
+	free(daddr);
+}
+
+static void test_recv_order(const struct test_params p, int fd[], int mod)
+{
+	char recv_buf[8], send_buf[8];
+	struct msghdr msg;
+	struct iovec recv_io = { recv_buf, 8 };
+	struct epoll_event ev;
+	int epfd, conn, i, sport, expected;
+	uint32_t data, ndata;
+
+	epfd = epoll_create(1);
+	if (epfd < 0)
+		error(1, errno, "failed to create epoll");
+	for (i = 0; i < p.recv_socks; ++i) {
+		ev.events = EPOLLIN;
+		ev.data.fd = fd[i];
+		if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd[i], &ev))
+			error(1, errno, "failed to register sock %d epoll", i);
+	}
+
+	memset(&msg, 0, sizeof(msg));
+	msg.msg_iov = &recv_io;
+	msg.msg_iovlen = 1;
+
+	for (data = 0; data < p.recv_socks * 2; ++data) {
+		sport = p.send_port_min + data;
+		ndata = htonl(data);
+		memcpy(send_buf, &ndata, sizeof(ndata));
+		send_from(p, sport, send_buf, sizeof(ndata));
+
+		i = epoll_wait(epfd, &ev, 1, -1);
+		if (i < 0)
+			error(1, errno, "epoll wait failed");
+
+		if (p.protocol == SOCK_STREAM) {
+			conn = accept(ev.data.fd, NULL, NULL);
+			if (conn < 0)
+				error(1, errno, "error accepting");
+			i = recvmsg(conn, &msg, 0);
+			close(conn);
+		} else {
+			i = recvmsg(ev.data.fd, &msg, 0);
+		}
+		if (i < 0)
+			error(1, errno, "recvmsg error");
+		if (i != sizeof(ndata))
+			error(1, 0, "expected size %zd got %d",
+			      sizeof(ndata), i);
+
+		for (i = 0; i < p.recv_socks; ++i)
+			if (ev.data.fd == fd[i])
+				break;
+		memcpy(&ndata, recv_buf, sizeof(ndata));
+		fprintf(stderr, "Socket %d: %d\n", i, ntohl(ndata));
+
+		expected = (sport % mod);
+		if (i != expected)
+			error(1, 0, "expected socket %d", expected);
+	}
+}
+
+static void test_reuseport_ebpf(struct test_params p)
+{
+	int i, fd[p.recv_socks];
+
+	fprintf(stderr, "Testing EBPF mod %zd...\n", p.recv_socks);
+	build_recv_group(p, fd, p.recv_socks, attach_ebpf);
+	test_recv_order(p, fd, p.recv_socks);
+
+	p.send_port_min += p.recv_socks * 2;
+	fprintf(stderr, "Reprograming, testing mod %zd...\n", p.recv_socks / 2);
+	attach_ebpf(fd[0], p.recv_socks / 2);
+	test_recv_order(p, fd, p.recv_socks / 2);
+
+	for (i = 0; i < p.recv_socks; ++i)
+		close(fd[i]);
+}
+
+static void test_reuseport_cbpf(struct test_params p)
+{
+	int i, fd[p.recv_socks];
+
+	fprintf(stderr, "Testing CBPF mod %zd...\n", p.recv_socks);
+	build_recv_group(p, fd, p.recv_socks, attach_cbpf);
+	test_recv_order(p, fd, p.recv_socks);
+
+	p.send_port_min += p.recv_socks * 2;
+	fprintf(stderr, "Reprograming, testing mod %zd...\n", p.recv_socks / 2);
+	attach_cbpf(fd[0], p.recv_socks / 2);
+	test_recv_order(p, fd, p.recv_socks / 2);
+
+	for (i = 0; i < p.recv_socks; ++i)
+		close(fd[i]);
+}
+
+static void test_extra_filter(const struct test_params p)
+{
+	struct sockaddr * const addr =
+		new_any_sockaddr(p.recv_family, p.recv_port);
+	int fd1, fd2, opt;
+
+	fprintf(stderr, "Testing too many filters...\n");
+	fd1 = socket(p.recv_family, p.protocol, 0);
+	if (fd1 < 0)
+		error(1, errno, "failed to create socket 1");
+	fd2 = socket(p.recv_family, p.protocol, 0);
+	if (fd2 < 0)
+		error(1, errno, "failed to create socket 2");
+
+	opt = 1;
+	if (setsockopt(fd1, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt)))
+		error(1, errno, "failed to set SO_REUSEPORT on socket 1");
+	if (setsockopt(fd2, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt)))
+		error(1, errno, "failed to set SO_REUSEPORT on socket 2");
+
+	attach_ebpf(fd1, 10);
+	attach_ebpf(fd2, 10);
+
+	if (bind(fd1, addr, sockaddr_size()))
+		error(1, errno, "failed to bind recv socket 1");
+
+	if (!bind(fd2, addr, sockaddr_size()) || errno != EADDRINUSE)
+		error(1, errno, "bind socket 2 should fail with EADDRINUSE");
+
+	free(addr);
+}
+
+static void test_filter_no_reuseport(const struct test_params p)
+{
+	struct sockaddr * const addr =
+		new_any_sockaddr(p.recv_family, p.recv_port);
+	const char bpf_license[] = "GPL";
+	struct bpf_insn ecode[] = {
+		{ BPF_ALU64 | BPF_MOV | BPF_K, BPF_REG_0, 0, 0, 10 },
+		{ BPF_JMP | BPF_EXIT, 0, 0, 0, 0 }
+	};
+	struct sock_filter ccode[] = {{ BPF_RET | BPF_A, 0, 0, 0 }};
+	union bpf_attr eprog;
+	struct sock_fprog cprog;
+	int fd, bpf_fd;
+
+	fprintf(stderr, "Testing filters on non-SO_REUSEPORT socket...\n");
+
+	memset(&eprog, 0, sizeof(eprog));
+	eprog.prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
+	eprog.insn_cnt = ARRAY_SIZE(ecode);
+	eprog.insns = (unsigned long) &ecode;
+	eprog.license = (unsigned long) &bpf_license;
+	eprog.kern_version = 0;
+
+	memset(&cprog, 0, sizeof(cprog));
+	cprog.len = ARRAY_SIZE(ccode);
+	cprog.filter = ccode;
+
+
+	bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD, &eprog, sizeof(eprog));
+	if (bpf_fd < 0)
+		error(1, errno, "ebpf error");
+	fd = socket(p.recv_family, p.protocol, 0);
+	if (fd < 0)
+		error(1, errno, "failed to create socket 1");
+
+	if (bind(fd, addr, sockaddr_size()))
+		error(1, errno, "failed to bind recv socket 1");
+
+	errno = 0;
+	if (!setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_EBPF, &bpf_fd,
+			sizeof(bpf_fd)) || errno != EINVAL)
+		error(1, errno, "setsockopt should have returned EINVAL");
+
+	errno = 0;
+	if (!setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_CBPF, &cprog,
+		       sizeof(cprog)) || errno != EINVAL)
+		error(1, errno, "setsockopt should have returned EINVAL");
+
+	free(addr);
+}
+
+static void test_filter_without_bind(void)
+{
+	int fd1, fd2, opt = 1;
+
+	fprintf(stderr, "Testing filter add without bind...\n");
+	fd1 = socket(AF_INET, SOCK_DGRAM, 0);
+	if (fd1 < 0)
+		error(1, errno, "failed to create socket 1");
+	fd2 = socket(AF_INET, SOCK_DGRAM, 0);
+	if (fd2 < 0)
+		error(1, errno, "failed to create socket 2");
+	if (setsockopt(fd1, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt)))
+		error(1, errno, "failed to set SO_REUSEPORT on socket 1");
+	if (setsockopt(fd2, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt)))
+		error(1, errno, "failed to set SO_REUSEPORT on socket 2");
+
+	attach_ebpf(fd1, 10);
+	attach_cbpf(fd2, 10);
+
+	close(fd1);
+	close(fd2);
+}
+
+void enable_fastopen(void)
+{
+	int fd = open("/proc/sys/net/ipv4/tcp_fastopen", 0);
+	int rw_mask = 3;  /* bit 1: client side; bit-2 server side */
+	int val, size;
+	char buf[16];
+
+	if (fd < 0)
+		error(1, errno, "Unable to open tcp_fastopen sysctl");
+	if (read(fd, buf, sizeof(buf)) <= 0)
+		error(1, errno, "Unable to read tcp_fastopen sysctl");
+	val = atoi(buf);
+	close(fd);
+
+	if ((val & rw_mask) != rw_mask) {
+		fd = open("/proc/sys/net/ipv4/tcp_fastopen", O_RDWR);
+		if (fd < 0)
+			error(1, errno,
+			      "Unable to open tcp_fastopen sysctl for writing");
+		val |= rw_mask;
+		size = snprintf(buf, 16, "%d", val);
+		if (write(fd, buf, size) <= 0)
+			error(1, errno, "Unable to write tcp_fastopen sysctl");
+		close(fd);
+	}
+}
+
+static struct rlimit rlim_old;
+
+static  __attribute__((constructor)) void main_ctor(void)
+{
+	getrlimit(RLIMIT_MEMLOCK, &rlim_old);
+
+	if (rlim_old.rlim_cur != RLIM_INFINITY) {
+		struct rlimit rlim_new;
+
+		rlim_new.rlim_cur = rlim_old.rlim_cur + (1UL << 20);
+		rlim_new.rlim_max = rlim_old.rlim_max + (1UL << 20);
+		setrlimit(RLIMIT_MEMLOCK, &rlim_new);
+	}
+}
+
+static __attribute__((destructor)) void main_dtor(void)
+{
+	setrlimit(RLIMIT_MEMLOCK, &rlim_old);
+}
+
+int main(void)
+{
+	fprintf(stderr, "---- IPv4 UDP ----\n");
+	/* NOTE: UDP socket lookups traverse a different code path when there
+	 * are > 10 sockets in a group.  Run the bpf test through both paths.
+	 */
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET,
+		.send_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 10,
+		.recv_port = 8000,
+		.send_port_min = 9000});
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET,
+		.send_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 20,
+		.recv_port = 8000,
+		.send_port_min = 9000});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET,
+		.send_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 10,
+		.recv_port = 8001,
+		.send_port_min = 9020});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET,
+		.send_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 20,
+		.recv_port = 8001,
+		.send_port_min = 9020});
+	test_extra_filter((struct test_params) {
+		.recv_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_port = 8002});
+	test_filter_no_reuseport((struct test_params) {
+		.recv_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_port = 8008});
+
+	fprintf(stderr, "---- IPv6 UDP ----\n");
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET6,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 10,
+		.recv_port = 8003,
+		.send_port_min = 9040});
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET6,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 20,
+		.recv_port = 8003,
+		.send_port_min = 9040});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET6,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 10,
+		.recv_port = 8004,
+		.send_port_min = 9060});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET6,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 20,
+		.recv_port = 8004,
+		.send_port_min = 9060});
+	test_extra_filter((struct test_params) {
+		.recv_family = AF_INET6,
+		.protocol = SOCK_DGRAM,
+		.recv_port = 8005});
+	test_filter_no_reuseport((struct test_params) {
+		.recv_family = AF_INET6,
+		.protocol = SOCK_DGRAM,
+		.recv_port = 8009});
+
+	fprintf(stderr, "---- IPv6 UDP w/ mapped IPv4 ----\n");
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 20,
+		.recv_port = 8006,
+		.send_port_min = 9080});
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 10,
+		.recv_port = 8006,
+		.send_port_min = 9080});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 10,
+		.recv_port = 8007,
+		.send_port_min = 9100});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET,
+		.protocol = SOCK_DGRAM,
+		.recv_socks = 20,
+		.recv_port = 8007,
+		.send_port_min = 9100});
+
+	/* TCP fastopen is required for the TCP tests */
+	enable_fastopen();
+	fprintf(stderr, "---- IPv4 TCP ----\n");
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET,
+		.send_family = AF_INET,
+		.protocol = SOCK_STREAM,
+		.recv_socks = 10,
+		.recv_port = 8008,
+		.send_port_min = 9120});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET,
+		.send_family = AF_INET,
+		.protocol = SOCK_STREAM,
+		.recv_socks = 10,
+		.recv_port = 8009,
+		.send_port_min = 9160});
+	test_extra_filter((struct test_params) {
+		.recv_family = AF_INET,
+		.protocol = SOCK_STREAM,
+		.recv_port = 8010});
+	test_filter_no_reuseport((struct test_params) {
+		.recv_family = AF_INET,
+		.protocol = SOCK_STREAM,
+		.recv_port = 8011});
+
+	fprintf(stderr, "---- IPv6 TCP ----\n");
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET6,
+		.protocol = SOCK_STREAM,
+		.recv_socks = 10,
+		.recv_port = 8012,
+		.send_port_min = 9200});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET6,
+		.protocol = SOCK_STREAM,
+		.recv_socks = 10,
+		.recv_port = 8013,
+		.send_port_min = 9240});
+	test_extra_filter((struct test_params) {
+		.recv_family = AF_INET6,
+		.protocol = SOCK_STREAM,
+		.recv_port = 8014});
+	test_filter_no_reuseport((struct test_params) {
+		.recv_family = AF_INET6,
+		.protocol = SOCK_STREAM,
+		.recv_port = 8015});
+
+	fprintf(stderr, "---- IPv6 TCP w/ mapped IPv4 ----\n");
+	test_reuseport_ebpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET,
+		.protocol = SOCK_STREAM,
+		.recv_socks = 10,
+		.recv_port = 8016,
+		.send_port_min = 9320});
+	test_reuseport_cbpf((struct test_params) {
+		.recv_family = AF_INET6,
+		.send_family = AF_INET,
+		.protocol = SOCK_STREAM,
+		.recv_socks = 10,
+		.recv_port = 8017,
+		.send_port_min = 9360});
+
+	test_filter_without_bind();
+
+	fprintf(stderr, "SUCCESS\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/reuseport_bpf_cpu.c b/tools/testing/selftests/net/reuseport_bpf_cpu.c
new file mode 100644
index 000000000..2d6461747
--- /dev/null
+++ b/tools/testing/selftests/net/reuseport_bpf_cpu.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test functionality of BPF filters with SO_REUSEPORT.  This program creates
+ * an SO_REUSEPORT receiver group containing one socket per CPU core. It then
+ * creates a BPF program that will select a socket from this group based
+ * on the core id that receives the packet.  The sending code artificially
+ * moves itself to run on different core ids and sends one message from
+ * each core.  Since these packets are delivered over loopback, they should
+ * arrive on the same core that sent them.  The receiving code then ensures
+ * that the packet was received on the socket for the corresponding core id.
+ * This entire process is done for several different core id permutations
+ * and for each IPv4/IPv6 and TCP/UDP combination.
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <linux/filter.h>
+#include <linux/in.h>
+#include <linux/unistd.h>
+#include <sched.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/epoll.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <unistd.h>
+
+static const int PORT = 8888;
+
+static void build_rcv_group(int *rcv_fd, size_t len, int family, int proto)
+{
+	struct sockaddr_storage addr;
+	struct sockaddr_in  *addr4;
+	struct sockaddr_in6 *addr6;
+	size_t i;
+	int opt;
+
+	switch (family) {
+	case AF_INET:
+		addr4 = (struct sockaddr_in *)&addr;
+		addr4->sin_family = AF_INET;
+		addr4->sin_addr.s_addr = htonl(INADDR_ANY);
+		addr4->sin_port = htons(PORT);
+		break;
+	case AF_INET6:
+		addr6 = (struct sockaddr_in6 *)&addr;
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_addr = in6addr_any;
+		addr6->sin6_port = htons(PORT);
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+	}
+
+	for (i = 0; i < len; ++i) {
+		rcv_fd[i] = socket(family, proto, 0);
+		if (rcv_fd[i] < 0)
+			error(1, errno, "failed to create receive socket");
+
+		opt = 1;
+		if (setsockopt(rcv_fd[i], SOL_SOCKET, SO_REUSEPORT, &opt,
+			       sizeof(opt)))
+			error(1, errno, "failed to set SO_REUSEPORT");
+
+		if (bind(rcv_fd[i], (struct sockaddr *)&addr, sizeof(addr)))
+			error(1, errno, "failed to bind receive socket");
+
+		if (proto == SOCK_STREAM && listen(rcv_fd[i], len * 10))
+			error(1, errno, "failed to listen on receive port");
+	}
+}
+
+static void attach_bpf(int fd)
+{
+	struct sock_filter code[] = {
+		/* A = raw_smp_processor_id() */
+		{ BPF_LD  | BPF_W | BPF_ABS, 0, 0, SKF_AD_OFF + SKF_AD_CPU },
+		/* return A */
+		{ BPF_RET | BPF_A, 0, 0, 0 },
+	};
+	struct sock_fprog p = {
+		.len = 2,
+		.filter = code,
+	};
+
+	if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_CBPF, &p, sizeof(p)))
+		error(1, errno, "failed to set SO_ATTACH_REUSEPORT_CBPF");
+}
+
+static void send_from_cpu(int cpu_id, int family, int proto)
+{
+	struct sockaddr_storage saddr, daddr;
+	struct sockaddr_in  *saddr4, *daddr4;
+	struct sockaddr_in6 *saddr6, *daddr6;
+	cpu_set_t cpu_set;
+	int fd;
+
+	switch (family) {
+	case AF_INET:
+		saddr4 = (struct sockaddr_in *)&saddr;
+		saddr4->sin_family = AF_INET;
+		saddr4->sin_addr.s_addr = htonl(INADDR_ANY);
+		saddr4->sin_port = 0;
+
+		daddr4 = (struct sockaddr_in *)&daddr;
+		daddr4->sin_family = AF_INET;
+		daddr4->sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+		daddr4->sin_port = htons(PORT);
+		break;
+	case AF_INET6:
+		saddr6 = (struct sockaddr_in6 *)&saddr;
+		saddr6->sin6_family = AF_INET6;
+		saddr6->sin6_addr = in6addr_any;
+		saddr6->sin6_port = 0;
+
+		daddr6 = (struct sockaddr_in6 *)&daddr;
+		daddr6->sin6_family = AF_INET6;
+		daddr6->sin6_addr = in6addr_loopback;
+		daddr6->sin6_port = htons(PORT);
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+	}
+
+	memset(&cpu_set, 0, sizeof(cpu_set));
+	CPU_SET(cpu_id, &cpu_set);
+	if (sched_setaffinity(0, sizeof(cpu_set), &cpu_set) < 0)
+		error(1, errno, "failed to pin to cpu");
+
+	fd = socket(family, proto, 0);
+	if (fd < 0)
+		error(1, errno, "failed to create send socket");
+
+	if (bind(fd, (struct sockaddr *)&saddr, sizeof(saddr)))
+		error(1, errno, "failed to bind send socket");
+
+	if (connect(fd, (struct sockaddr *)&daddr, sizeof(daddr)))
+		error(1, errno, "failed to connect send socket");
+
+	if (send(fd, "a", 1, 0) < 0)
+		error(1, errno, "failed to send message");
+
+	close(fd);
+}
+
+static
+void receive_on_cpu(int *rcv_fd, int len, int epfd, int cpu_id, int proto)
+{
+	struct epoll_event ev;
+	int i, fd;
+	char buf[8];
+
+	i = epoll_wait(epfd, &ev, 1, -1);
+	if (i < 0)
+		error(1, errno, "epoll_wait failed");
+
+	if (proto == SOCK_STREAM) {
+		fd = accept(ev.data.fd, NULL, NULL);
+		if (fd < 0)
+			error(1, errno, "failed to accept");
+		i = recv(fd, buf, sizeof(buf), 0);
+		close(fd);
+	} else {
+		i = recv(ev.data.fd, buf, sizeof(buf), 0);
+	}
+
+	if (i < 0)
+		error(1, errno, "failed to recv");
+
+	for (i = 0; i < len; ++i)
+		if (ev.data.fd == rcv_fd[i])
+			break;
+	if (i == len)
+		error(1, 0, "failed to find socket");
+	fprintf(stderr, "send cpu %d, receive socket %d\n", cpu_id, i);
+	if (cpu_id != i)
+		error(1, 0, "cpu id/receive socket mismatch");
+}
+
+static void test(int *rcv_fd, int len, int family, int proto)
+{
+	struct epoll_event ev;
+	int epfd, cpu;
+
+	build_rcv_group(rcv_fd, len, family, proto);
+	attach_bpf(rcv_fd[0]);
+
+	epfd = epoll_create(1);
+	if (epfd < 0)
+		error(1, errno, "failed to create epoll");
+	for (cpu = 0; cpu < len; ++cpu) {
+		ev.events = EPOLLIN;
+		ev.data.fd = rcv_fd[cpu];
+		if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fd[cpu], &ev))
+			error(1, errno, "failed to register sock epoll");
+	}
+
+	/* Forward iterate */
+	for (cpu = 0; cpu < len; ++cpu) {
+		send_from_cpu(cpu, family, proto);
+		receive_on_cpu(rcv_fd, len, epfd, cpu, proto);
+	}
+
+	/* Reverse iterate */
+	for (cpu = len - 1; cpu >= 0; --cpu) {
+		send_from_cpu(cpu, family, proto);
+		receive_on_cpu(rcv_fd, len, epfd, cpu, proto);
+	}
+
+	/* Even cores */
+	for (cpu = 0; cpu < len; cpu += 2) {
+		send_from_cpu(cpu, family, proto);
+		receive_on_cpu(rcv_fd, len, epfd, cpu, proto);
+	}
+
+	/* Odd cores */
+	for (cpu = 1; cpu < len; cpu += 2) {
+		send_from_cpu(cpu, family, proto);
+		receive_on_cpu(rcv_fd, len, epfd, cpu, proto);
+	}
+
+	close(epfd);
+	for (cpu = 0; cpu < len; ++cpu)
+		close(rcv_fd[cpu]);
+}
+
+int main(void)
+{
+	int *rcv_fd, cpus;
+
+	cpus = sysconf(_SC_NPROCESSORS_ONLN);
+	if (cpus <= 0)
+		error(1, errno, "failed counting cpus");
+
+	rcv_fd = calloc(cpus, sizeof(int));
+	if (!rcv_fd)
+		error(1, 0, "failed to allocate array");
+
+	fprintf(stderr, "---- IPv4 UDP ----\n");
+	test(rcv_fd, cpus, AF_INET, SOCK_DGRAM);
+
+	fprintf(stderr, "---- IPv6 UDP ----\n");
+	test(rcv_fd, cpus, AF_INET6, SOCK_DGRAM);
+
+	fprintf(stderr, "---- IPv4 TCP ----\n");
+	test(rcv_fd, cpus, AF_INET, SOCK_STREAM);
+
+	fprintf(stderr, "---- IPv6 TCP ----\n");
+	test(rcv_fd, cpus, AF_INET6, SOCK_STREAM);
+
+	free(rcv_fd);
+
+	fprintf(stderr, "SUCCESS\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/reuseport_bpf_numa.c b/tools/testing/selftests/net/reuseport_bpf_numa.c
new file mode 100644
index 000000000..c9f478b40
--- /dev/null
+++ b/tools/testing/selftests/net/reuseport_bpf_numa.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test functionality of BPF filters with SO_REUSEPORT. Same test as
+ * in reuseport_bpf_cpu, only as one socket per NUMA node.
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <linux/filter.h>
+#include <linux/bpf.h>
+#include <linux/in.h>
+#include <linux/unistd.h>
+#include <sched.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/epoll.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <unistd.h>
+#include <numa.h>
+
+#include "../kselftest.h"
+
+static const int PORT = 8888;
+
+static void build_rcv_group(int *rcv_fd, size_t len, int family, int proto)
+{
+	struct sockaddr_storage addr;
+	struct sockaddr_in  *addr4;
+	struct sockaddr_in6 *addr6;
+	size_t i;
+	int opt;
+
+	switch (family) {
+	case AF_INET:
+		addr4 = (struct sockaddr_in *)&addr;
+		addr4->sin_family = AF_INET;
+		addr4->sin_addr.s_addr = htonl(INADDR_ANY);
+		addr4->sin_port = htons(PORT);
+		break;
+	case AF_INET6:
+		addr6 = (struct sockaddr_in6 *)&addr;
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_addr = in6addr_any;
+		addr6->sin6_port = htons(PORT);
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+	}
+
+	for (i = 0; i < len; ++i) {
+		rcv_fd[i] = socket(family, proto, 0);
+		if (rcv_fd[i] < 0)
+			error(1, errno, "failed to create receive socket");
+
+		opt = 1;
+		if (setsockopt(rcv_fd[i], SOL_SOCKET, SO_REUSEPORT, &opt,
+			       sizeof(opt)))
+			error(1, errno, "failed to set SO_REUSEPORT");
+
+		if (bind(rcv_fd[i], (struct sockaddr *)&addr, sizeof(addr)))
+			error(1, errno, "failed to bind receive socket");
+
+		if (proto == SOCK_STREAM && listen(rcv_fd[i], len * 10))
+			error(1, errno, "failed to listen on receive port");
+	}
+}
+
+static void attach_bpf(int fd)
+{
+	static char bpf_log_buf[65536];
+	static const char bpf_license[] = "";
+
+	int bpf_fd;
+	const struct bpf_insn prog[] = {
+		/* R0 = bpf_get_numa_node_id() */
+		{ BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_get_numa_node_id },
+		/* return R0 */
+		{ BPF_JMP | BPF_EXIT, 0, 0, 0, 0 }
+	};
+	union bpf_attr attr;
+
+	memset(&attr, 0, sizeof(attr));
+	attr.prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
+	attr.insn_cnt = sizeof(prog) / sizeof(prog[0]);
+	attr.insns = (unsigned long) &prog;
+	attr.license = (unsigned long) &bpf_license;
+	attr.log_buf = (unsigned long) &bpf_log_buf;
+	attr.log_size = sizeof(bpf_log_buf);
+	attr.log_level = 1;
+
+	bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD, &attr, sizeof(attr));
+	if (bpf_fd < 0)
+		error(1, errno, "ebpf error. log:\n%s\n", bpf_log_buf);
+
+	if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_REUSEPORT_EBPF, &bpf_fd,
+			sizeof(bpf_fd)))
+		error(1, errno, "failed to set SO_ATTACH_REUSEPORT_EBPF");
+
+	close(bpf_fd);
+}
+
+static void send_from_node(int node_id, int family, int proto)
+{
+	struct sockaddr_storage saddr, daddr;
+	struct sockaddr_in  *saddr4, *daddr4;
+	struct sockaddr_in6 *saddr6, *daddr6;
+	int fd;
+
+	switch (family) {
+	case AF_INET:
+		saddr4 = (struct sockaddr_in *)&saddr;
+		saddr4->sin_family = AF_INET;
+		saddr4->sin_addr.s_addr = htonl(INADDR_ANY);
+		saddr4->sin_port = 0;
+
+		daddr4 = (struct sockaddr_in *)&daddr;
+		daddr4->sin_family = AF_INET;
+		daddr4->sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+		daddr4->sin_port = htons(PORT);
+		break;
+	case AF_INET6:
+		saddr6 = (struct sockaddr_in6 *)&saddr;
+		saddr6->sin6_family = AF_INET6;
+		saddr6->sin6_addr = in6addr_any;
+		saddr6->sin6_port = 0;
+
+		daddr6 = (struct sockaddr_in6 *)&daddr;
+		daddr6->sin6_family = AF_INET6;
+		daddr6->sin6_addr = in6addr_loopback;
+		daddr6->sin6_port = htons(PORT);
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+	}
+
+	if (numa_run_on_node(node_id) < 0)
+		error(1, errno, "failed to pin to node");
+
+	fd = socket(family, proto, 0);
+	if (fd < 0)
+		error(1, errno, "failed to create send socket");
+
+	if (bind(fd, (struct sockaddr *)&saddr, sizeof(saddr)))
+		error(1, errno, "failed to bind send socket");
+
+	if (connect(fd, (struct sockaddr *)&daddr, sizeof(daddr)))
+		error(1, errno, "failed to connect send socket");
+
+	if (send(fd, "a", 1, 0) < 0)
+		error(1, errno, "failed to send message");
+
+	close(fd);
+}
+
+static
+void receive_on_node(int *rcv_fd, int len, int epfd, int node_id, int proto)
+{
+	struct epoll_event ev;
+	int i, fd;
+	char buf[8];
+
+	i = epoll_wait(epfd, &ev, 1, -1);
+	if (i < 0)
+		error(1, errno, "epoll_wait failed");
+
+	if (proto == SOCK_STREAM) {
+		fd = accept(ev.data.fd, NULL, NULL);
+		if (fd < 0)
+			error(1, errno, "failed to accept");
+		i = recv(fd, buf, sizeof(buf), 0);
+		close(fd);
+	} else {
+		i = recv(ev.data.fd, buf, sizeof(buf), 0);
+	}
+
+	if (i < 0)
+		error(1, errno, "failed to recv");
+
+	for (i = 0; i < len; ++i)
+		if (ev.data.fd == rcv_fd[i])
+			break;
+	if (i == len)
+		error(1, 0, "failed to find socket");
+	fprintf(stderr, "send node %d, receive socket %d\n", node_id, i);
+	if (node_id != i)
+		error(1, 0, "node id/receive socket mismatch");
+}
+
+static void test(int *rcv_fd, int len, int family, int proto)
+{
+	struct epoll_event ev;
+	int epfd, node;
+
+	build_rcv_group(rcv_fd, len, family, proto);
+	attach_bpf(rcv_fd[0]);
+
+	epfd = epoll_create(1);
+	if (epfd < 0)
+		error(1, errno, "failed to create epoll");
+	for (node = 0; node < len; ++node) {
+		ev.events = EPOLLIN;
+		ev.data.fd = rcv_fd[node];
+		if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fd[node], &ev))
+			error(1, errno, "failed to register sock epoll");
+	}
+
+	/* Forward iterate */
+	for (node = 0; node < len; ++node) {
+		send_from_node(node, family, proto);
+		receive_on_node(rcv_fd, len, epfd, node, proto);
+	}
+
+	/* Reverse iterate */
+	for (node = len - 1; node >= 0; --node) {
+		send_from_node(node, family, proto);
+		receive_on_node(rcv_fd, len, epfd, node, proto);
+	}
+
+	close(epfd);
+	for (node = 0; node < len; ++node)
+		close(rcv_fd[node]);
+}
+
+int main(void)
+{
+	int *rcv_fd, nodes;
+
+	if (numa_available() < 0)
+		ksft_exit_skip("no numa api support\n");
+
+	nodes = numa_max_node() + 1;
+
+	rcv_fd = calloc(nodes, sizeof(int));
+	if (!rcv_fd)
+		error(1, 0, "failed to allocate array");
+
+	fprintf(stderr, "---- IPv4 UDP ----\n");
+	test(rcv_fd, nodes, AF_INET, SOCK_DGRAM);
+
+	fprintf(stderr, "---- IPv6 UDP ----\n");
+	test(rcv_fd, nodes, AF_INET6, SOCK_DGRAM);
+
+	fprintf(stderr, "---- IPv4 TCP ----\n");
+	test(rcv_fd, nodes, AF_INET, SOCK_STREAM);
+
+	fprintf(stderr, "---- IPv6 TCP ----\n");
+	test(rcv_fd, nodes, AF_INET6, SOCK_STREAM);
+
+	free(rcv_fd);
+
+	fprintf(stderr, "SUCCESS\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/reuseport_dualstack.c b/tools/testing/selftests/net/reuseport_dualstack.c
new file mode 100644
index 000000000..fb7a59ed7
--- /dev/null
+++ b/tools/testing/selftests/net/reuseport_dualstack.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * It is possible to use SO_REUSEPORT to open multiple sockets bound to
+ * equivalent local addresses using AF_INET and AF_INET6 at the same time.  If
+ * the AF_INET6 socket has IPV6_V6ONLY set, it's clear which socket should
+ * receive a given incoming packet.  However, when it is not set, incoming v4
+ * packets should prefer the AF_INET socket(s).  This behavior was defined with
+ * the original SO_REUSEPORT implementation, but broke with
+ * e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection")
+ * This test creates these mixed AF_INET/AF_INET6 sockets and asserts the
+ * AF_INET preference for v4 packets.
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <linux/in.h>
+#include <linux/unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/epoll.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <unistd.h>
+
+static const int PORT = 8888;
+
+static void build_rcv_fd(int family, int proto, int *rcv_fds, int count)
+{
+	struct sockaddr_storage addr;
+	struct sockaddr_in  *addr4;
+	struct sockaddr_in6 *addr6;
+	int opt, i;
+
+	switch (family) {
+	case AF_INET:
+		addr4 = (struct sockaddr_in *)&addr;
+		addr4->sin_family = AF_INET;
+		addr4->sin_addr.s_addr = htonl(INADDR_ANY);
+		addr4->sin_port = htons(PORT);
+		break;
+	case AF_INET6:
+		addr6 = (struct sockaddr_in6 *)&addr;
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_addr = in6addr_any;
+		addr6->sin6_port = htons(PORT);
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+	}
+
+	for (i = 0; i < count; ++i) {
+		rcv_fds[i] = socket(family, proto, 0);
+		if (rcv_fds[i] < 0)
+			error(1, errno, "failed to create receive socket");
+
+		opt = 1;
+		if (setsockopt(rcv_fds[i], SOL_SOCKET, SO_REUSEPORT, &opt,
+			       sizeof(opt)))
+			error(1, errno, "failed to set SO_REUSEPORT");
+
+		if (bind(rcv_fds[i], (struct sockaddr *)&addr, sizeof(addr)))
+			error(1, errno, "failed to bind receive socket");
+
+		if (proto == SOCK_STREAM && listen(rcv_fds[i], 10))
+			error(1, errno, "failed to listen on receive port");
+	}
+}
+
+static void send_from_v4(int proto)
+{
+	struct sockaddr_in  saddr, daddr;
+	int fd;
+
+	saddr.sin_family = AF_INET;
+	saddr.sin_addr.s_addr = htonl(INADDR_ANY);
+	saddr.sin_port = 0;
+
+	daddr.sin_family = AF_INET;
+	daddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+	daddr.sin_port = htons(PORT);
+
+	fd = socket(AF_INET, proto, 0);
+	if (fd < 0)
+		error(1, errno, "failed to create send socket");
+
+	if (bind(fd, (struct sockaddr *)&saddr, sizeof(saddr)))
+		error(1, errno, "failed to bind send socket");
+
+	if (connect(fd, (struct sockaddr *)&daddr, sizeof(daddr)))
+		error(1, errno, "failed to connect send socket");
+
+	if (send(fd, "a", 1, 0) < 0)
+		error(1, errno, "failed to send message");
+
+	close(fd);
+}
+
+static int receive_once(int epfd, int proto)
+{
+	struct epoll_event ev;
+	int i, fd;
+	char buf[8];
+
+	i = epoll_wait(epfd, &ev, 1, -1);
+	if (i < 0)
+		error(1, errno, "epoll_wait failed");
+
+	if (proto == SOCK_STREAM) {
+		fd = accept(ev.data.fd, NULL, NULL);
+		if (fd < 0)
+			error(1, errno, "failed to accept");
+		i = recv(fd, buf, sizeof(buf), 0);
+		close(fd);
+	} else {
+		i = recv(ev.data.fd, buf, sizeof(buf), 0);
+	}
+
+	if (i < 0)
+		error(1, errno, "failed to recv");
+
+	return ev.data.fd;
+}
+
+static void test(int *rcv_fds, int count, int proto)
+{
+	struct epoll_event ev;
+	int epfd, i, test_fd;
+	int test_family;
+	socklen_t len;
+
+	epfd = epoll_create(1);
+	if (epfd < 0)
+		error(1, errno, "failed to create epoll");
+
+	ev.events = EPOLLIN;
+	for (i = 0; i < count; ++i) {
+		ev.data.fd = rcv_fds[i];
+		if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fds[i], &ev))
+			error(1, errno, "failed to register sock epoll");
+	}
+
+	send_from_v4(proto);
+
+	test_fd = receive_once(epfd, proto);
+	len = sizeof(test_family);
+	if (getsockopt(test_fd, SOL_SOCKET, SO_DOMAIN, &test_family, &len))
+		error(1, errno, "failed to read socket domain");
+	if (test_family != AF_INET)
+		error(1, 0, "expected to receive on v4 socket but got v6 (%d)",
+		      test_family);
+
+	close(epfd);
+}
+
+int main(void)
+{
+	int rcv_fds[32], i;
+
+	fprintf(stderr, "---- UDP IPv4 created before IPv6 ----\n");
+	build_rcv_fd(AF_INET, SOCK_DGRAM, rcv_fds, 5);
+	build_rcv_fd(AF_INET6, SOCK_DGRAM, &(rcv_fds[5]), 5);
+	test(rcv_fds, 10, SOCK_DGRAM);
+	for (i = 0; i < 10; ++i)
+		close(rcv_fds[i]);
+
+	fprintf(stderr, "---- UDP IPv6 created before IPv4 ----\n");
+	build_rcv_fd(AF_INET6, SOCK_DGRAM, rcv_fds, 5);
+	build_rcv_fd(AF_INET, SOCK_DGRAM, &(rcv_fds[5]), 5);
+	test(rcv_fds, 10, SOCK_DGRAM);
+	for (i = 0; i < 10; ++i)
+		close(rcv_fds[i]);
+
+	/* NOTE: UDP socket lookups traverse a different code path when there
+	 * are > 10 sockets in a group.
+	 */
+	fprintf(stderr, "---- UDP IPv4 created before IPv6 (large) ----\n");
+	build_rcv_fd(AF_INET, SOCK_DGRAM, rcv_fds, 16);
+	build_rcv_fd(AF_INET6, SOCK_DGRAM, &(rcv_fds[16]), 16);
+	test(rcv_fds, 32, SOCK_DGRAM);
+	for (i = 0; i < 32; ++i)
+		close(rcv_fds[i]);
+
+	fprintf(stderr, "---- UDP IPv6 created before IPv4 (large) ----\n");
+	build_rcv_fd(AF_INET6, SOCK_DGRAM, rcv_fds, 16);
+	build_rcv_fd(AF_INET, SOCK_DGRAM, &(rcv_fds[16]), 16);
+	test(rcv_fds, 32, SOCK_DGRAM);
+	for (i = 0; i < 32; ++i)
+		close(rcv_fds[i]);
+
+	fprintf(stderr, "---- TCP IPv4 created before IPv6 ----\n");
+	build_rcv_fd(AF_INET, SOCK_STREAM, rcv_fds, 5);
+	build_rcv_fd(AF_INET6, SOCK_STREAM, &(rcv_fds[5]), 5);
+	test(rcv_fds, 10, SOCK_STREAM);
+	for (i = 0; i < 10; ++i)
+		close(rcv_fds[i]);
+
+	fprintf(stderr, "---- TCP IPv6 created before IPv4 ----\n");
+	build_rcv_fd(AF_INET6, SOCK_STREAM, rcv_fds, 5);
+	build_rcv_fd(AF_INET, SOCK_STREAM, &(rcv_fds[5]), 5);
+	test(rcv_fds, 10, SOCK_STREAM);
+	for (i = 0; i < 10; ++i)
+		close(rcv_fds[i]);
+
+	fprintf(stderr, "SUCCESS\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/route_localnet.sh b/tools/testing/selftests/net/route_localnet.sh
new file mode 100755
index 000000000..116bfeab7
--- /dev/null
+++ b/tools/testing/selftests/net/route_localnet.sh
@@ -0,0 +1,74 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run a couple of tests when route_localnet = 1.
+
+readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+
+setup() {
+    ip netns add "${PEER_NS}"
+    ip -netns "${PEER_NS}" link set dev lo up
+    ip link add name veth0 type veth peer name veth1
+    ip link set dev veth0 up
+    ip link set dev veth1 netns "${PEER_NS}"
+
+    # Enable route_localnet and delete useless route 127.0.0.0/8.
+    sysctl -w net.ipv4.conf.veth0.route_localnet=1
+    ip netns exec "${PEER_NS}" sysctl -w net.ipv4.conf.veth1.route_localnet=1
+    ip route del 127.0.0.0/8 dev lo table local
+    ip netns exec "${PEER_NS}" ip route del 127.0.0.0/8 dev lo table local
+
+    ifconfig veth0 127.25.3.4/24 up
+    ip netns exec "${PEER_NS}" ifconfig veth1 127.25.3.14/24 up
+
+    ip route flush cache
+    ip netns exec "${PEER_NS}" ip route flush cache
+}
+
+cleanup() {
+    ip link del veth0
+    ip route add local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1
+    local -r ns="$(ip netns list|grep $PEER_NS)"
+    [ -n "$ns" ] && ip netns del $ns 2>/dev/null
+}
+
+# Run test when arp_announce = 2.
+run_arp_announce_test() {
+    echo "run arp_announce test"
+    setup
+
+    sysctl -w net.ipv4.conf.veth0.arp_announce=2
+    ip netns exec "${PEER_NS}" sysctl -w net.ipv4.conf.veth1.arp_announce=2
+    ping -c5 -I veth0 127.25.3.14
+    if [ $? -ne 0 ];then
+        echo "failed"
+    else
+        echo "ok"
+    fi
+
+    cleanup
+}
+
+# Run test when arp_ignore = 3.
+run_arp_ignore_test() {
+    echo "run arp_ignore test"
+    setup
+
+    sysctl -w net.ipv4.conf.veth0.arp_ignore=3
+    ip netns exec "${PEER_NS}" sysctl -w net.ipv4.conf.veth1.arp_ignore=3
+    ping -c5 -I veth0 127.25.3.14
+    if [ $? -ne 0 ];then
+        echo "failed"
+    else
+        echo "ok"
+    fi
+
+    cleanup
+}
+
+run_all_tests() {
+    run_arp_announce_test
+    run_arp_ignore_test
+}
+
+run_all_tests
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
new file mode 100755
index 000000000..cbf166df5
--- /dev/null
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -0,0 +1,1301 @@
+#!/bin/bash
+#
+# This test is for checking rtnetlink callpaths, and get as much coverage as possible.
+#
+# set -e
+
+devdummy="test-dummy0"
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# set global exit status, but never reset nonzero one.
+check_err()
+{
+	if [ $ret -eq 0 ]; then
+		ret=$1
+	fi
+}
+
+# same but inverted -- used when command must fail for test to pass
+check_fail()
+{
+	if [ $1 -eq 0 ]; then
+		ret=1
+	fi
+}
+
+kci_add_dummy()
+{
+	ip link add name "$devdummy" type dummy
+	check_err $?
+	ip link set "$devdummy" up
+	check_err $?
+}
+
+kci_del_dummy()
+{
+	ip link del dev "$devdummy"
+	check_err $?
+}
+
+kci_test_netconf()
+{
+	dev="$1"
+	r=$ret
+
+	ip netconf show dev "$dev" > /dev/null
+	check_err $?
+
+	for f in 4 6; do
+		ip -$f netconf show dev "$dev" > /dev/null
+		check_err $?
+	done
+
+	if [ $ret -ne 0 ] ;then
+		echo "FAIL: ip netconf show $dev"
+		test $r -eq 0 && ret=0
+		return 1
+	fi
+}
+
+# add a bridge with vlans on top
+kci_test_bridge()
+{
+	devbr="test-br0"
+	vlandev="testbr-vlan1"
+
+	local ret=0
+	ip link add name "$devbr" type bridge
+	check_err $?
+
+	ip link set dev "$devdummy" master "$devbr"
+	check_err $?
+
+	ip link set "$devbr" up
+	check_err $?
+
+	ip link add link "$devbr" name "$vlandev" type vlan id 1
+	check_err $?
+	ip addr add dev "$vlandev" 10.200.7.23/30
+	check_err $?
+	ip -6 addr add dev "$vlandev" dead:42::1234/64
+	check_err $?
+	ip -d link > /dev/null
+	check_err $?
+	ip r s t all > /dev/null
+	check_err $?
+
+	for name in "$devbr" "$vlandev" "$devdummy" ; do
+		kci_test_netconf "$name"
+	done
+
+	ip -6 addr del dev "$vlandev" dead:42::1234/64
+	check_err $?
+
+	ip link del dev "$vlandev"
+	check_err $?
+	ip link del dev "$devbr"
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: bridge setup"
+		return 1
+	fi
+	echo "PASS: bridge setup"
+
+}
+
+kci_test_gre()
+{
+	gredev=neta
+	rem=10.42.42.1
+	loc=10.0.0.1
+
+	local ret=0
+	ip tunnel add $gredev mode gre remote $rem local $loc ttl 1
+	check_err $?
+	ip link set $gredev up
+	check_err $?
+	ip addr add 10.23.7.10 dev $gredev
+	check_err $?
+	ip route add 10.23.8.0/30 dev $gredev
+	check_err $?
+	ip addr add dev "$devdummy" 10.23.7.11/24
+	check_err $?
+	ip link > /dev/null
+	check_err $?
+	ip addr > /dev/null
+	check_err $?
+
+	kci_test_netconf "$gredev"
+
+	ip addr del dev "$devdummy" 10.23.7.11/24
+	check_err $?
+
+	ip link del $gredev
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: gre tunnel endpoint"
+		return 1
+	fi
+	echo "PASS: gre tunnel endpoint"
+}
+
+# tc uses rtnetlink too, for full tc testing
+# please see tools/testing/selftests/tc-testing.
+kci_test_tc()
+{
+	dev=lo
+	local ret=0
+
+	tc qdisc add dev "$dev" root handle 1: htb
+	check_err $?
+	tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit
+	check_err $?
+	tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256
+	check_err $?
+	tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256
+	check_err $?
+	tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256
+	check_err $?
+	tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10
+	check_err $?
+	tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10
+	check_err $?
+	tc filter show dev "$dev" parent  1:0 > /dev/null
+	check_err $?
+	tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32
+	check_err $?
+	tc filter show dev "$dev" parent  1:0 > /dev/null
+	check_err $?
+	tc qdisc del dev "$dev" root handle 1: htb
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: tc htb hierarchy"
+		return 1
+	fi
+	echo "PASS: tc htb hierarchy"
+
+}
+
+kci_test_polrouting()
+{
+	local ret=0
+	ip rule add fwmark 1 lookup 100
+	check_err $?
+	ip route add local 0.0.0.0/0 dev lo table 100
+	check_err $?
+	ip r s t all > /dev/null
+	check_err $?
+	ip rule del fwmark 1 lookup 100
+	check_err $?
+	ip route del local 0.0.0.0/0 dev lo table 100
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: policy route test"
+		return 1
+	fi
+	echo "PASS: policy routing"
+}
+
+kci_test_route_get()
+{
+	local hash_policy=$(sysctl -n net.ipv4.fib_multipath_hash_policy)
+
+	local ret=0
+
+	ip route get 127.0.0.1 > /dev/null
+	check_err $?
+	ip route get 127.0.0.1 dev "$devdummy" > /dev/null
+	check_err $?
+	ip route get ::1 > /dev/null
+	check_err $?
+	ip route get fe80::1 dev "$devdummy" > /dev/null
+	check_err $?
+	ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x1 mark 0x1 > /dev/null
+	check_err $?
+	ip route get ::1 from ::1 iif lo oif lo tos 0x1 mark 0x1 > /dev/null
+	check_err $?
+	ip addr add dev "$devdummy" 10.23.7.11/24
+	check_err $?
+	ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" > /dev/null
+	check_err $?
+	ip route add 10.23.8.0/24 \
+		nexthop via 10.23.7.13 dev "$devdummy" \
+		nexthop via 10.23.7.14 dev "$devdummy"
+	check_err $?
+	sysctl -wq net.ipv4.fib_multipath_hash_policy=0
+	ip route get 10.23.8.11 > /dev/null
+	check_err $?
+	sysctl -wq net.ipv4.fib_multipath_hash_policy=1
+	ip route get 10.23.8.11 > /dev/null
+	check_err $?
+	sysctl -wq net.ipv4.fib_multipath_hash_policy="$hash_policy"
+	ip route del 10.23.8.0/24
+	check_err $?
+	ip addr del dev "$devdummy" 10.23.7.11/24
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: route get"
+		return 1
+	fi
+
+	echo "PASS: route get"
+}
+
+kci_test_addrlft()
+{
+	for i in $(seq 10 100) ;do
+		lft=$(((RANDOM%3) + 1))
+		ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1))
+		check_err $?
+	done
+
+	sleep 5
+
+	ip addr show dev "$devdummy" | grep "10.23.11."
+	if [ $? -eq 0 ]; then
+		echo "FAIL: preferred_lft addresses remaining"
+		check_err 1
+		return
+	fi
+
+	echo "PASS: preferred_lft addresses have expired"
+}
+
+kci_test_promote_secondaries()
+{
+	promote=$(sysctl -n net.ipv4.conf.$devdummy.promote_secondaries)
+
+	sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=1
+
+	for i in $(seq 2 254);do
+		IP="10.23.11.$i"
+		ip -f inet addr add $IP/16 brd + dev "$devdummy"
+		ifconfig "$devdummy" $IP netmask 255.255.0.0
+	done
+
+	ip addr flush dev "$devdummy"
+
+	[ $promote -eq 0 ] && sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=0
+
+	echo "PASS: promote_secondaries complete"
+}
+
+kci_test_addrlabel()
+{
+	local ret=0
+
+	ip addrlabel add prefix dead::/64 dev lo label 1
+	check_err $?
+
+	ip addrlabel list |grep -q "prefix dead::/64 dev lo label 1"
+	check_err $?
+
+	ip addrlabel del prefix dead::/64 dev lo label 1 2> /dev/null
+	check_err $?
+
+	ip addrlabel add prefix dead::/64 label 1 2> /dev/null
+	check_err $?
+
+	ip addrlabel del prefix dead::/64 label 1 2> /dev/null
+	check_err $?
+
+	# concurrent add/delete
+	for i in $(seq 1 1000); do
+		ip addrlabel add prefix 1c3::/64 label 12345 2>/dev/null
+	done &
+
+	for i in $(seq 1 1000); do
+		ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null
+	done
+
+	wait
+
+	ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: ipv6 addrlabel"
+		return 1
+	fi
+
+	echo "PASS: ipv6 addrlabel"
+}
+
+kci_test_ifalias()
+{
+	local ret=0
+	namewant=$(uuidgen)
+	syspathname="/sys/class/net/$devdummy/ifalias"
+
+	ip link set dev "$devdummy" alias "$namewant"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: cannot set interface alias of $devdummy to $namewant"
+		return 1
+	fi
+
+	ip link show "$devdummy" | grep -q "alias $namewant"
+	check_err $?
+
+	if [ -r "$syspathname" ] ; then
+		read namehave < "$syspathname"
+		if [ "$namewant" != "$namehave" ]; then
+			echo "FAIL: did set ifalias $namewant but got $namehave"
+			return 1
+		fi
+
+		namewant=$(uuidgen)
+		echo "$namewant" > "$syspathname"
+	        ip link show "$devdummy" | grep -q "alias $namewant"
+		check_err $?
+
+		# sysfs interface allows to delete alias again
+		echo "" > "$syspathname"
+
+	        ip link show "$devdummy" | grep -q "alias $namewant"
+		check_fail $?
+
+		for i in $(seq 1 100); do
+			uuidgen > "$syspathname" &
+		done
+
+		wait
+
+		# re-add the alias -- kernel should free mem when dummy dev is removed
+		ip link set dev "$devdummy" alias "$namewant"
+		check_err $?
+	fi
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: set interface alias $devdummy to $namewant"
+		return 1
+	fi
+
+	echo "PASS: set ifalias $namewant for $devdummy"
+}
+
+kci_test_vrf()
+{
+	vrfname="test-vrf"
+	local ret=0
+
+	ip link show type vrf 2>/dev/null
+	if [ $? -ne 0 ]; then
+		echo "SKIP: vrf: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip link add "$vrfname" type vrf table 10
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: can't add vrf interface, skipping test"
+		return 0
+	fi
+
+	ip -br link show type vrf | grep -q "$vrfname"
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: created vrf device not found"
+		return 1
+	fi
+
+	ip link set dev "$vrfname" up
+	check_err $?
+
+	ip link set dev "$devdummy" master "$vrfname"
+	check_err $?
+	ip link del dev "$vrfname"
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: vrf"
+		return 1
+	fi
+
+	echo "PASS: vrf"
+}
+
+kci_test_encap_vxlan()
+{
+	local ret=0
+	vxlan="test-vxlan0"
+	vlan="test-vlan0"
+	testns="$1"
+
+	ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \
+		dev "$devdummy" dstport 4789 2>/dev/null
+	if [ $? -ne 0 ]; then
+		echo "FAIL: can't add vxlan interface, skipping test"
+		return 0
+	fi
+	check_err $?
+
+	ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan"
+	check_err $?
+
+	ip -netns "$testns" link set up dev "$vxlan"
+	check_err $?
+
+	ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1
+	check_err $?
+
+	# changelink testcases
+	ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy" 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64
+	check_err $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning
+	check_err $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan proxy 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan norsc 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan external 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan gbp 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link set dev "$vxlan" type vxlan gpe 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" link del "$vxlan"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: vxlan"
+		return 1
+	fi
+	echo "PASS: vxlan"
+}
+
+kci_test_encap_fou()
+{
+	local ret=0
+	name="test-fou"
+	testns="$1"
+
+	ip fou help 2>&1 |grep -q 'Usage: ip fou'
+	if [ $? -ne 0 ];then
+		echo "SKIP: fou: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	if ! /sbin/modprobe -q -n fou; then
+		echo "SKIP: module fou is not found"
+		return $ksft_skip
+	fi
+	/sbin/modprobe -q fou
+	ip -netns "$testns" fou add port 7777 ipproto 47 2>/dev/null
+	if [ $? -ne 0 ];then
+		echo "FAIL: can't add fou port 7777, skipping test"
+		return 1
+	fi
+
+	ip -netns "$testns" fou add port 8888 ipproto 4
+	check_err $?
+
+	ip -netns "$testns" fou del port 9999 2>/dev/null
+	check_fail $?
+
+	ip -netns "$testns" fou del port 7777
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: fou"
+		return 1
+	fi
+
+	echo "PASS: fou"
+}
+
+# test various encap methods, use netns to avoid unwanted interference
+kci_test_encap()
+{
+	testns="testns"
+	local ret=0
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP encap tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	ip -netns "$testns" link set lo up
+	check_err $?
+
+	ip -netns "$testns" link add name "$devdummy" type dummy
+	check_err $?
+	ip -netns "$testns" link set "$devdummy" up
+	check_err $?
+
+	kci_test_encap_vxlan "$testns"
+	check_err $?
+	kci_test_encap_fou "$testns"
+	check_err $?
+
+	ip netns del "$testns"
+	return $ret
+}
+
+kci_test_macsec()
+{
+	msname="test_macsec0"
+	local ret=0
+
+	ip macsec help 2>&1 | grep -q "^Usage: ip macsec"
+	if [ $? -ne 0 ]; then
+		echo "SKIP: macsec: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on
+	check_err $?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: can't add macsec interface, skipping test"
+		return 1
+	fi
+
+	ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
+	check_err $?
+
+	ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
+	check_err $?
+
+	ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef
+	check_err $?
+
+	ip macsec show > /dev/null
+	check_err $?
+
+	ip link del dev "$msname"
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: macsec"
+		return 1
+	fi
+
+	echo "PASS: macsec"
+}
+
+#-------------------------------------------------------------------
+# Example commands
+#   ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07 replay-window 32 \
+#            aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \
+#            sel src 14.0.0.52/24 dst 14.0.0.70/24
+#   ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \
+#            tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07
+#
+# Subcommands not tested
+#    ip x s update
+#    ip x s allocspi
+#    ip x s deleteall
+#    ip x p update
+#    ip x p deleteall
+#    ip x p set
+#-------------------------------------------------------------------
+kci_test_ipsec()
+{
+	local ret=0
+	algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128"
+	srcip=192.168.123.1
+	dstip=192.168.123.2
+	spi=7
+
+	ip addr add $srcip dev $devdummy
+
+	# flush to be sure there's nothing configured
+	ip x s flush ; ip x p flush
+	check_err $?
+
+	# start the monitor in the background
+	tmpfile=`mktemp /var/run/ipsectestXXX`
+	mpid=`(ip x m > $tmpfile & echo $!) 2>/dev/null`
+	sleep 0.2
+
+	ipsecid="proto esp src $srcip dst $dstip spi 0x07"
+	ip x s add $ipsecid \
+            mode transport reqid 0x07 replay-window 32 \
+            $algo sel src $srcip/24 dst $dstip/24
+	check_err $?
+
+	lines=`ip x s list | grep $srcip | grep $dstip | wc -l`
+	test $lines -eq 2
+	check_err $?
+
+	ip x s count | grep -q "SAD count 1"
+	check_err $?
+
+	lines=`ip x s get $ipsecid | grep $srcip | grep $dstip | wc -l`
+	test $lines -eq 2
+	check_err $?
+
+	ip x s delete $ipsecid
+	check_err $?
+
+	lines=`ip x s list | wc -l`
+	test $lines -eq 0
+	check_err $?
+
+	ipsecsel="dir out src $srcip/24 dst $dstip/24"
+	ip x p add $ipsecsel \
+		    tmpl proto esp src $srcip dst $dstip \
+		    spi 0x07 mode transport reqid 0x07
+	check_err $?
+
+	lines=`ip x p list | grep $srcip | grep $dstip | wc -l`
+	test $lines -eq 2
+	check_err $?
+
+	ip x p count | grep -q "SPD IN  0 OUT 1 FWD 0"
+	check_err $?
+
+	lines=`ip x p get $ipsecsel | grep $srcip | grep $dstip | wc -l`
+	test $lines -eq 2
+	check_err $?
+
+	ip x p delete $ipsecsel
+	check_err $?
+
+	lines=`ip x p list | wc -l`
+	test $lines -eq 0
+	check_err $?
+
+	# check the monitor results
+	kill $mpid
+	lines=`wc -l $tmpfile | cut "-d " -f1`
+	test $lines -eq 20
+	check_err $?
+	rm -rf $tmpfile
+
+	# clean up any leftovers
+	ip x s flush
+	check_err $?
+	ip x p flush
+	check_err $?
+	ip addr del $srcip/32 dev $devdummy
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec"
+		return 1
+	fi
+	echo "PASS: ipsec"
+}
+
+#-------------------------------------------------------------------
+# Example commands
+#   ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07 replay-window 32 \
+#            aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \
+#            sel src 14.0.0.52/24 dst 14.0.0.70/24
+#            offload dev sim1 dir out
+#   ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \
+#            tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07
+#
+#-------------------------------------------------------------------
+kci_test_ipsec_offload()
+{
+	local ret=0
+	algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128"
+	srcip=192.168.123.3
+	dstip=192.168.123.4
+	sysfsd=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/
+	sysfsf=$sysfsd/ipsec
+	sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/
+	probed=false
+
+	# setup netdevsim since dummydev doesn't have offload support
+	if [ ! -w /sys/bus/netdevsim/new_device ] ; then
+		modprobe -q netdevsim
+		check_err $?
+		if [ $ret -ne 0 ]; then
+			echo "SKIP: ipsec_offload can't load netdevsim"
+			return $ksft_skip
+		fi
+		probed=true
+	fi
+
+	echo "0" > /sys/bus/netdevsim/new_device
+	while [ ! -d $sysfsnet ] ; do :; done
+	udevadm settle
+	dev=`ls $sysfsnet`
+
+	ip addr add $srcip dev $dev
+	ip link set $dev up
+	if [ ! -d $sysfsd ] ; then
+		echo "FAIL: ipsec_offload can't create device $dev"
+		return 1
+	fi
+	if [ ! -f $sysfsf ] ; then
+		echo "FAIL: ipsec_offload netdevsim doesn't support IPsec offload"
+		return 1
+	fi
+
+	# flush to be sure there's nothing configured
+	ip x s flush ; ip x p flush
+
+	# create offloaded SAs, both in and out
+	ip x p add dir out src $srcip/24 dst $dstip/24 \
+	    tmpl proto esp src $srcip dst $dstip spi 9 \
+	    mode transport reqid 42
+	check_err $?
+	ip x p add dir in src $dstip/24 dst $srcip/24 \
+	    tmpl proto esp src $dstip dst $srcip spi 9 \
+	    mode transport reqid 42
+	check_err $?
+
+	ip x s add proto esp src $srcip dst $dstip spi 9 \
+	    mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \
+	    offload dev $dev dir out
+	check_err $?
+	ip x s add proto esp src $dstip dst $srcip spi 9 \
+	    mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \
+	    offload dev $dev dir in
+	check_err $?
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec_offload can't create SA"
+		return 1
+	fi
+
+	# does offload show up in ip output
+	lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"`
+	if [ $lines -ne 2 ] ; then
+		echo "FAIL: ipsec_offload SA offload missing from list output"
+		check_err 1
+	fi
+
+	# use ping to exercise the Tx path
+	ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null
+
+	# does driver have correct offload info
+	diff $sysfsf - << EOF
+SA count=2 tx=3
+sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000
+sa[0]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
+sa[0]    key=0x34333231 38373635 32313039 36353433
+sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
+sa[1]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
+sa[1]    key=0x34333231 38373635 32313039 36353433
+EOF
+	if [ $? -ne 0 ] ; then
+		echo "FAIL: ipsec_offload incorrect driver data"
+		check_err 1
+	fi
+
+	# does offload get removed from driver
+	ip x s flush
+	ip x p flush
+	lines=`grep -c "SA count=0" $sysfsf`
+	if [ $lines -ne 1 ] ; then
+		echo "FAIL: ipsec_offload SA not removed from driver"
+		check_err 1
+	fi
+
+	# clean up any leftovers
+	echo 0 > /sys/bus/netdevsim/del_device
+	$probed && rmmod netdevsim
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec_offload"
+		return 1
+	fi
+	echo "PASS: ipsec_offload"
+}
+
+kci_test_gretap()
+{
+	testns="testns"
+	DEV_NS=gretap00
+	local ret=0
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP gretap tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	ip link help gretap 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP: gretap: iproute2 too old"
+		ip netns del "$testns"
+		return $ksft_skip
+	fi
+
+	# test native tunnel
+	ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \
+		key 102 local 172.16.1.100 remote 172.16.1.200
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test external mode
+	ip -netns "$testns" link add dev "$DEV_NS" type gretap external
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: gretap"
+		ip netns del "$testns"
+		return 1
+	fi
+	echo "PASS: gretap"
+
+	ip netns del "$testns"
+}
+
+kci_test_ip6gretap()
+{
+	testns="testns"
+	DEV_NS=ip6gretap00
+	local ret=0
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP ip6gretap tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	ip link help ip6gretap 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP: ip6gretap: iproute2 too old"
+		ip netns del "$testns"
+		return $ksft_skip
+	fi
+
+	# test native tunnel
+	ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \
+		key 102 local fc00:100::1 remote fc00:100::2
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test external mode
+	ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ip6gretap"
+		ip netns del "$testns"
+		return 1
+	fi
+	echo "PASS: ip6gretap"
+
+	ip netns del "$testns"
+}
+
+kci_test_erspan()
+{
+	testns="testns"
+	DEV_NS=erspan00
+	local ret=0
+
+	ip link help erspan 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP: erspan: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP erspan tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	# test native tunnel erspan v1
+	ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
+		key 102 local 172.16.1.100 remote 172.16.1.200 \
+		erspan_ver 1 erspan 488
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test native tunnel erspan v2
+	ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
+		key 102 local 172.16.1.100 remote 172.16.1.200 \
+		erspan_ver 2 erspan_dir ingress erspan_hwid 7
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test external mode
+	ip -netns "$testns" link add dev "$DEV_NS" type erspan external
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: erspan"
+		ip netns del "$testns"
+		return 1
+	fi
+	echo "PASS: erspan"
+
+	ip netns del "$testns"
+}
+
+kci_test_ip6erspan()
+{
+	testns="testns"
+	DEV_NS=ip6erspan00
+	local ret=0
+
+	ip link help ip6erspan 2>&1 | grep -q "^Usage:"
+	if [ $? -ne 0 ];then
+		echo "SKIP: ip6erspan: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip netns add "$testns"
+	if [ $? -ne 0 ]; then
+		echo "SKIP ip6erspan tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	# test native tunnel ip6erspan v1
+	ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
+		key 102 local fc00:100::1 remote fc00:100::2 \
+		erspan_ver 1 erspan 488
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test native tunnel ip6erspan v2
+	ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
+		key 102 local fc00:100::1 remote fc00:100::2 \
+		erspan_ver 2 erspan_dir ingress erspan_hwid 7
+	check_err $?
+
+	ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
+	check_err $?
+
+	ip -netns "$testns" link set dev $DEV_NS up
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	# test external mode
+	ip -netns "$testns" link add dev "$DEV_NS" \
+		type ip6erspan external
+	check_err $?
+
+	ip -netns "$testns" link del "$DEV_NS"
+	check_err $?
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ip6erspan"
+		ip netns del "$testns"
+		return 1
+	fi
+	echo "PASS: ip6erspan"
+
+	ip netns del "$testns"
+}
+
+kci_test_fdb_get()
+{
+	IP="ip -netns testns"
+	BRIDGE="bridge -netns testns"
+	brdev="test-br0"
+	vxlandev="vxlan10"
+	test_mac=de:ad:be:ef:13:37
+	localip="10.0.2.2"
+	dstip="10.0.2.3"
+	local ret=0
+
+	bridge fdb help 2>&1 |grep -q 'bridge fdb get'
+	if [ $? -ne 0 ];then
+		echo "SKIP: fdb get tests: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	ip netns add testns
+	if [ $? -ne 0 ]; then
+		echo "SKIP fdb get tests: cannot add net namespace $testns"
+		return $ksft_skip
+	fi
+
+	$IP link add "$vxlandev" type vxlan id 10 local $localip \
+                dstport 4789 2>/dev/null
+	check_err $?
+	$IP link add name "$brdev" type bridge &>/dev/null
+	check_err $?
+	$IP link set dev "$vxlandev" master "$brdev" &>/dev/null
+	check_err $?
+	$BRIDGE fdb add $test_mac dev "$vxlandev" master &>/dev/null
+	check_err $?
+	$BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self &>/dev/null
+	check_err $?
+
+	$BRIDGE fdb get $test_mac brport "$vxlandev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
+	check_err $?
+	$BRIDGE fdb get $test_mac br "$brdev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
+	check_err $?
+	$BRIDGE fdb get $test_mac dev "$vxlandev" self 2>/dev/null | grep -q "dev $vxlandev dst $dstip"
+	check_err $?
+
+	ip netns del testns &>/dev/null
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: bridge fdb get"
+		return 1
+	fi
+
+	echo "PASS: bridge fdb get"
+}
+
+kci_test_neigh_get()
+{
+	dstmac=de:ad:be:ef:13:37
+	dstip=10.0.2.4
+	dstip6=dead::2
+	local ret=0
+
+	ip neigh help 2>&1 |grep -q 'ip neigh get'
+	if [ $? -ne 0 ];then
+		echo "SKIP: fdb get tests: iproute2 too old"
+		return $ksft_skip
+	fi
+
+	# ipv4
+	ip neigh add $dstip lladdr $dstmac dev "$devdummy"  > /dev/null
+	check_err $?
+	ip neigh get $dstip dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
+	check_err $?
+	ip neigh del $dstip lladdr $dstmac dev "$devdummy"  > /dev/null
+	check_err $?
+
+	# ipv4 proxy
+	ip neigh add proxy $dstip dev "$devdummy" > /dev/null
+	check_err $?
+	ip neigh get proxy $dstip dev "$devdummy" 2>/dev/null | grep -q "$dstip"
+	check_err $?
+	ip neigh del proxy $dstip dev "$devdummy" > /dev/null
+	check_err $?
+
+	# ipv6
+	ip neigh add $dstip6 lladdr $dstmac dev "$devdummy"  > /dev/null
+	check_err $?
+	ip neigh get $dstip6 dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
+	check_err $?
+	ip neigh del $dstip6 lladdr $dstmac dev "$devdummy"  > /dev/null
+	check_err $?
+
+	# ipv6 proxy
+	ip neigh add proxy $dstip6 dev "$devdummy" > /dev/null
+	check_err $?
+	ip neigh get proxy $dstip6 dev "$devdummy" 2>/dev/null | grep -q "$dstip6"
+	check_err $?
+	ip neigh del proxy $dstip6 dev "$devdummy" > /dev/null
+	check_err $?
+
+	if [ $ret -ne 0 ];then
+		echo "FAIL: neigh get"
+		return 1
+	fi
+
+	echo "PASS: neigh get"
+}
+
+kci_test_bridge_parent_id()
+{
+	local ret=0
+	sysfsnet=/sys/bus/netdevsim/devices/netdevsim
+	probed=false
+
+	if [ ! -w /sys/bus/netdevsim/new_device ] ; then
+		modprobe -q netdevsim
+		check_err $?
+		if [ $ret -ne 0 ]; then
+			echo "SKIP: bridge_parent_id can't load netdevsim"
+			return $ksft_skip
+		fi
+		probed=true
+	fi
+
+	echo "10 1" > /sys/bus/netdevsim/new_device
+	while [ ! -d ${sysfsnet}10 ] ; do :; done
+	echo "20 1" > /sys/bus/netdevsim/new_device
+	while [ ! -d ${sysfsnet}20 ] ; do :; done
+	udevadm settle
+	dev10=`ls ${sysfsnet}10/net/`
+	dev20=`ls ${sysfsnet}20/net/`
+
+	ip link add name test-bond0 type bond mode 802.3ad
+	ip link set dev $dev10 master test-bond0
+	ip link set dev $dev20 master test-bond0
+	ip link add name test-br0 type bridge
+	ip link set dev test-bond0 master test-br0
+	check_err $?
+
+	# clean up any leftovers
+	ip link del dev test-br0
+	ip link del dev test-bond0
+	echo 20 > /sys/bus/netdevsim/del_device
+	echo 10 > /sys/bus/netdevsim/del_device
+	$probed && rmmod netdevsim
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: bridge_parent_id"
+		return 1
+	fi
+	echo "PASS: bridge_parent_id"
+}
+
+kci_test_rtnl()
+{
+	local ret=0
+	kci_add_dummy
+	if [ $ret -ne 0 ];then
+		echo "FAIL: cannot add dummy interface"
+		return 1
+	fi
+
+	kci_test_polrouting
+	check_err $?
+	kci_test_route_get
+	check_err $?
+	kci_test_addrlft
+	check_err $?
+	kci_test_promote_secondaries
+	check_err $?
+	kci_test_tc
+	check_err $?
+	kci_test_gre
+	check_err $?
+	kci_test_gretap
+	check_err $?
+	kci_test_ip6gretap
+	check_err $?
+	kci_test_erspan
+	check_err $?
+	kci_test_ip6erspan
+	check_err $?
+	kci_test_bridge
+	check_err $?
+	kci_test_addrlabel
+	check_err $?
+	kci_test_ifalias
+	check_err $?
+	kci_test_vrf
+	check_err $?
+	kci_test_encap
+	check_err $?
+	kci_test_macsec
+	check_err $?
+	kci_test_ipsec
+	check_err $?
+	kci_test_ipsec_offload
+	check_err $?
+	kci_test_fdb_get
+	check_err $?
+	kci_test_neigh_get
+	check_err $?
+	kci_test_bridge_parent_id
+	check_err $?
+
+	kci_del_dummy
+	return $ret
+}
+
+#check for needed privileges
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip
+fi
+
+for x in ip tc;do
+	$x -Version 2>/dev/null >/dev/null
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not run test without the $x tool"
+		exit $ksft_skip
+	fi
+done
+
+kci_test_rtnl
+
+exit $?
diff --git a/tools/testing/selftests/net/run_afpackettests b/tools/testing/selftests/net/run_afpackettests
new file mode 100755
index 000000000..8b42e8b04
--- /dev/null
+++ b/tools/testing/selftests/net/run_afpackettests
@@ -0,0 +1,46 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+if [ $(id -u) != 0 ]; then
+	echo $msg must be run as root >&2
+	exit 0
+fi
+
+ret=0
+echo "--------------------"
+echo "running psock_fanout test"
+echo "--------------------"
+./in_netns.sh ./psock_fanout
+if [ $? -ne 0 ]; then
+	echo "[FAIL]"
+	ret=1
+else
+	echo "[PASS]"
+fi
+
+echo "--------------------"
+echo "running psock_tpacket test"
+echo "--------------------"
+if [ -f /proc/kallsyms ]; then
+	./in_netns.sh ./psock_tpacket
+	if [ $? -ne 0 ]; then
+		echo "[FAIL]"
+		ret=1
+	else
+		echo "[PASS]"
+	fi
+else
+	echo "[SKIP] CONFIG_KALLSYMS not enabled"
+fi
+
+echo "--------------------"
+echo "running txring_overwrite test"
+echo "--------------------"
+./in_netns.sh ./txring_overwrite
+if [ $? -ne 0 ]; then
+	echo "[FAIL]"
+	ret=1
+else
+	echo "[PASS]"
+fi
+exit $ret
diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests
new file mode 100755
index 000000000..14e41faf2
--- /dev/null
+++ b/tools/testing/selftests/net/run_netsocktests
@@ -0,0 +1,13 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+echo "--------------------"
+echo "running socket test"
+echo "--------------------"
+./socket
+if [ $? -ne 0 ]; then
+	echo "[FAIL]"
+	exit 1
+else
+	echo "[PASS]"
+fi
diff --git a/tools/testing/selftests/net/rxtimestamp.c b/tools/testing/selftests/net/rxtimestamp.c
new file mode 100644
index 000000000..e4613ce4e
--- /dev/null
+++ b/tools/testing/selftests/net/rxtimestamp.c
@@ -0,0 +1,430 @@
+#include <errno.h>
+#include <error.h>
+#include <getopt.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+#include <sys/ioctl.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+
+#include <asm/types.h>
+#include <linux/net_tstamp.h>
+#include <linux/errqueue.h>
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+
+struct options {
+	int so_timestamp;
+	int so_timestampns;
+	int so_timestamping;
+};
+
+struct tstamps {
+	bool tstamp;
+	bool tstampns;
+	bool swtstamp;
+	bool hwtstamp;
+};
+
+struct socket_type {
+	char *friendly_name;
+	int type;
+	int protocol;
+	bool enabled;
+};
+
+struct test_case {
+	struct options sockopt;
+	struct tstamps expected;
+	bool enabled;
+	bool warn_on_fail;
+};
+
+struct sof_flag {
+	int mask;
+	char *name;
+};
+
+static struct sof_flag sof_flags[] = {
+#define SOF_FLAG(f) { f, #f }
+	SOF_FLAG(SOF_TIMESTAMPING_SOFTWARE),
+	SOF_FLAG(SOF_TIMESTAMPING_RX_SOFTWARE),
+	SOF_FLAG(SOF_TIMESTAMPING_RX_HARDWARE),
+};
+
+static struct socket_type socket_types[] = {
+	{ "ip",		SOCK_RAW,	IPPROTO_EGP },
+	{ "udp",	SOCK_DGRAM,	IPPROTO_UDP },
+	{ "tcp",	SOCK_STREAM,	IPPROTO_TCP },
+};
+
+static struct test_case test_cases[] = {
+	{ {}, {} },
+	{
+		{ .so_timestamp = 1 },
+		{ .tstamp = true }
+	},
+	{
+		{ .so_timestampns = 1 },
+		{ .tstampns = true }
+	},
+	{
+		{ .so_timestamp = 1, .so_timestampns = 1 },
+		{ .tstampns = true }
+	},
+	{
+		{ .so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE },
+		{}
+	},
+	{
+		/* Loopback device does not support hw timestamps. */
+		{ .so_timestamping = SOF_TIMESTAMPING_RX_HARDWARE },
+		{}
+	},
+	{
+		{ .so_timestamping = SOF_TIMESTAMPING_SOFTWARE },
+		.warn_on_fail = true
+	},
+	{
+		{ .so_timestamping = SOF_TIMESTAMPING_RX_SOFTWARE
+			| SOF_TIMESTAMPING_RX_HARDWARE },
+		{}
+	},
+	{
+		{ .so_timestamping = SOF_TIMESTAMPING_SOFTWARE
+			| SOF_TIMESTAMPING_RX_SOFTWARE },
+		{ .swtstamp = true }
+	},
+	{
+		{ .so_timestamp = 1, .so_timestamping = SOF_TIMESTAMPING_SOFTWARE
+			| SOF_TIMESTAMPING_RX_SOFTWARE },
+		{ .tstamp = true, .swtstamp = true }
+	},
+};
+
+static struct option long_options[] = {
+	{ "list_tests", no_argument, 0, 'l' },
+	{ "test_num", required_argument, 0, 'n' },
+	{ "op_size", required_argument, 0, 's' },
+	{ "tcp", no_argument, 0, 't' },
+	{ "udp", no_argument, 0, 'u' },
+	{ "ip", no_argument, 0, 'i' },
+	{ "strict", no_argument, 0, 'S' },
+	{ "ipv4", no_argument, 0, '4' },
+	{ "ipv6", no_argument, 0, '6' },
+	{ NULL, 0, NULL, 0 },
+};
+
+static int next_port = 19999;
+static int op_size = 10 * 1024;
+
+void print_test_case(struct test_case *t)
+{
+	int f = 0;
+
+	printf("sockopts {");
+	if (t->sockopt.so_timestamp)
+		printf(" SO_TIMESTAMP ");
+	if (t->sockopt.so_timestampns)
+		printf(" SO_TIMESTAMPNS ");
+	if (t->sockopt.so_timestamping) {
+		printf(" SO_TIMESTAMPING: {");
+		for (f = 0; f < ARRAY_SIZE(sof_flags); f++)
+			if (t->sockopt.so_timestamping & sof_flags[f].mask)
+				printf(" %s |", sof_flags[f].name);
+		printf("}");
+	}
+	printf("} expected cmsgs: {");
+	if (t->expected.tstamp)
+		printf(" SCM_TIMESTAMP ");
+	if (t->expected.tstampns)
+		printf(" SCM_TIMESTAMPNS ");
+	if (t->expected.swtstamp || t->expected.hwtstamp) {
+		printf(" SCM_TIMESTAMPING {");
+		if (t->expected.swtstamp)
+			printf("0");
+		if (t->expected.swtstamp && t->expected.hwtstamp)
+			printf(",");
+		if (t->expected.hwtstamp)
+			printf("2");
+		printf("}");
+	}
+	printf("}\n");
+}
+
+void do_send(int src)
+{
+	int r;
+	char *buf = malloc(op_size);
+
+	memset(buf, 'z', op_size);
+	r = write(src, buf, op_size);
+	if (r < 0)
+		error(1, errno, "Failed to sendmsg");
+
+	free(buf);
+}
+
+bool do_recv(int rcv, int read_size, struct tstamps expected)
+{
+	const int CMSG_SIZE = 1024;
+
+	struct scm_timestamping *ts;
+	struct tstamps actual = {};
+	char cmsg_buf[CMSG_SIZE];
+	struct iovec recv_iov;
+	struct cmsghdr *cmsg;
+	bool failed = false;
+	struct msghdr hdr;
+	int flags = 0;
+	int r;
+
+	memset(&hdr, 0, sizeof(hdr));
+	hdr.msg_iov = &recv_iov;
+	hdr.msg_iovlen = 1;
+	recv_iov.iov_base = malloc(read_size);
+	recv_iov.iov_len = read_size;
+
+	hdr.msg_control = cmsg_buf;
+	hdr.msg_controllen = sizeof(cmsg_buf);
+
+	r = recvmsg(rcv, &hdr, flags);
+	if (r < 0)
+		error(1, errno, "Failed to recvmsg");
+	if (r != read_size)
+		error(1, 0, "Only received %d bytes of payload.", r);
+
+	if (hdr.msg_flags & (MSG_TRUNC | MSG_CTRUNC))
+		error(1, 0, "Message was truncated.");
+
+	for (cmsg = CMSG_FIRSTHDR(&hdr); cmsg != NULL;
+	     cmsg = CMSG_NXTHDR(&hdr, cmsg)) {
+		if (cmsg->cmsg_level != SOL_SOCKET)
+			error(1, 0, "Unexpected cmsg_level %d",
+			      cmsg->cmsg_level);
+		switch (cmsg->cmsg_type) {
+		case SCM_TIMESTAMP:
+			actual.tstamp = true;
+			break;
+		case SCM_TIMESTAMPNS:
+			actual.tstampns = true;
+			break;
+		case SCM_TIMESTAMPING:
+			ts = (struct scm_timestamping *)CMSG_DATA(cmsg);
+			actual.swtstamp = !!ts->ts[0].tv_sec;
+			if (ts->ts[1].tv_sec != 0)
+				error(0, 0, "ts[1] should not be set.");
+			actual.hwtstamp = !!ts->ts[2].tv_sec;
+			break;
+		default:
+			error(1, 0, "Unexpected cmsg_type %d", cmsg->cmsg_type);
+		}
+	}
+
+#define VALIDATE(field) \
+	do { \
+		if (expected.field != actual.field) { \
+			if (expected.field) \
+				error(0, 0, "Expected " #field " to be set."); \
+			else \
+				error(0, 0, \
+				      "Expected " #field " to not be set."); \
+			failed = true; \
+		} \
+	} while (0)
+
+	VALIDATE(tstamp);
+	VALIDATE(tstampns);
+	VALIDATE(swtstamp);
+	VALIDATE(hwtstamp);
+#undef VALIDATE
+
+	free(recv_iov.iov_base);
+
+	return failed;
+}
+
+void config_so_flags(int rcv, struct options o)
+{
+	int on = 1;
+
+	if (setsockopt(rcv, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)) < 0)
+		error(1, errno, "Failed to enable SO_REUSEADDR");
+
+	if (o.so_timestamp &&
+	    setsockopt(rcv, SOL_SOCKET, SO_TIMESTAMP,
+		       &o.so_timestamp, sizeof(o.so_timestamp)) < 0)
+		error(1, errno, "Failed to enable SO_TIMESTAMP");
+
+	if (o.so_timestampns &&
+	    setsockopt(rcv, SOL_SOCKET, SO_TIMESTAMPNS,
+		       &o.so_timestampns, sizeof(o.so_timestampns)) < 0)
+		error(1, errno, "Failed to enable SO_TIMESTAMPNS");
+
+	if (o.so_timestamping &&
+	    setsockopt(rcv, SOL_SOCKET, SO_TIMESTAMPING,
+		       &o.so_timestamping, sizeof(o.so_timestamping)) < 0)
+		error(1, errno, "Failed to set SO_TIMESTAMPING");
+}
+
+bool run_test_case(struct socket_type *s, int test_num, char ip_version,
+		   bool strict)
+{
+	union {
+		struct sockaddr_in6 addr6;
+		struct sockaddr_in addr4;
+		struct sockaddr addr_un;
+	} addr;
+	int read_size = op_size;
+	int src, dst, rcv, port;
+	socklen_t addr_size;
+	bool failed = false;
+
+	port = (s->type == SOCK_RAW) ? 0 : next_port++;
+	memset(&addr, 0, sizeof(addr));
+	if (ip_version == '4') {
+		addr.addr4.sin_family = AF_INET;
+		addr.addr4.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+		addr.addr4.sin_port = htons(port);
+		addr_size = sizeof(addr.addr4);
+		if (s->type == SOCK_RAW)
+			read_size += 20;  /* for IPv4 header */
+	} else {
+		addr.addr6.sin6_family = AF_INET6;
+		addr.addr6.sin6_addr = in6addr_loopback;
+		addr.addr6.sin6_port = htons(port);
+		addr_size = sizeof(addr.addr6);
+	}
+	printf("Starting testcase %d over ipv%c...\n", test_num, ip_version);
+	src = socket(addr.addr_un.sa_family, s->type,
+		     s->protocol);
+	if (src < 0)
+		error(1, errno, "Failed to open src socket");
+
+	dst = socket(addr.addr_un.sa_family, s->type,
+		     s->protocol);
+	if (dst < 0)
+		error(1, errno, "Failed to open dst socket");
+
+	if (bind(dst, &addr.addr_un, addr_size) < 0)
+		error(1, errno, "Failed to bind to port %d", port);
+
+	if (s->type == SOCK_STREAM && (listen(dst, 1) < 0))
+		error(1, errno, "Failed to listen");
+
+	if (connect(src, &addr.addr_un, addr_size) < 0)
+		error(1, errno, "Failed to connect");
+
+	if (s->type == SOCK_STREAM) {
+		rcv = accept(dst, NULL, NULL);
+		if (rcv < 0)
+			error(1, errno, "Failed to accept");
+		close(dst);
+	} else {
+		rcv = dst;
+	}
+
+	config_so_flags(rcv, test_cases[test_num].sockopt);
+	usleep(20000); /* setsockopt for SO_TIMESTAMPING is asynchronous */
+	do_send(src);
+
+	failed = do_recv(rcv, read_size, test_cases[test_num].expected);
+
+	close(rcv);
+	close(src);
+
+	if (failed) {
+		printf("FAILURE in testcase %d over ipv%c ", test_num,
+		       ip_version);
+		print_test_case(&test_cases[test_num]);
+		if (!strict && test_cases[test_num].warn_on_fail)
+			failed = false;
+	}
+	return failed;
+}
+
+int main(int argc, char **argv)
+{
+	bool all_protocols = true;
+	bool all_tests = true;
+	bool cfg_ipv4 = false;
+	bool cfg_ipv6 = false;
+	bool strict = false;
+	int arg_index = 0;
+	int failures = 0;
+	int s, t, opt;
+
+	while ((opt = getopt_long(argc, argv, "", long_options,
+				  &arg_index)) != -1) {
+		switch (opt) {
+		case 'l':
+			for (t = 0; t < ARRAY_SIZE(test_cases); t++) {
+				printf("%d\t", t);
+				print_test_case(&test_cases[t]);
+			}
+			return 0;
+		case 'n':
+			t = atoi(optarg);
+			if (t >= ARRAY_SIZE(test_cases))
+				error(1, 0, "Invalid test case: %d", t);
+			all_tests = false;
+			test_cases[t].enabled = true;
+			break;
+		case 's':
+			op_size = atoi(optarg);
+			break;
+		case 't':
+			all_protocols = false;
+			socket_types[2].enabled = true;
+			break;
+		case 'u':
+			all_protocols = false;
+			socket_types[1].enabled = true;
+			break;
+		case 'i':
+			all_protocols = false;
+			socket_types[0].enabled = true;
+			break;
+		case 'S':
+			strict = true;
+			break;
+		case '4':
+			cfg_ipv4 = true;
+			break;
+		case '6':
+			cfg_ipv6 = true;
+			break;
+		default:
+			error(1, 0, "Failed to parse parameters.");
+		}
+	}
+
+	for (s = 0; s < ARRAY_SIZE(socket_types); s++) {
+		if (!all_protocols && !socket_types[s].enabled)
+			continue;
+
+		printf("Testing %s...\n", socket_types[s].friendly_name);
+		for (t = 0; t < ARRAY_SIZE(test_cases); t++) {
+			if (!all_tests && !test_cases[t].enabled)
+				continue;
+			if (cfg_ipv4 || !cfg_ipv6)
+				if (run_test_case(&socket_types[s], t, '4',
+						  strict))
+					failures++;
+			if (cfg_ipv6 || !cfg_ipv4)
+				if (run_test_case(&socket_types[s], t, '6',
+						  strict))
+					failures++;
+		}
+	}
+	if (!failures)
+		printf("PASSED.\n");
+	return failures;
+}
diff --git a/tools/testing/selftests/net/rxtimestamp.sh b/tools/testing/selftests/net/rxtimestamp.sh
new file mode 100755
index 000000000..91631e88b
--- /dev/null
+++ b/tools/testing/selftests/net/rxtimestamp.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+./in_netns.sh ./rxtimestamp $@
diff --git a/tools/testing/selftests/net/so_txtime.c b/tools/testing/selftests/net/so_txtime.c
new file mode 100644
index 000000000..3155fbbf6
--- /dev/null
+++ b/tools/testing/selftests/net/so_txtime.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test the SO_TXTIME API
+ *
+ * Takes two streams of { payload, delivery time }[], one input and one output.
+ * Sends the input stream and verifies arrival matches the output stream.
+ * The two streams can differ due to out-of-order delivery and drops.
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <error.h>
+#include <errno.h>
+#include <inttypes.h>
+#include <linux/net_tstamp.h>
+#include <linux/errqueue.h>
+#include <linux/if_ether.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <time.h>
+#include <unistd.h>
+
+static int	cfg_clockid	= CLOCK_TAI;
+static bool	cfg_do_ipv4;
+static bool	cfg_do_ipv6;
+static uint16_t	cfg_port	= 8000;
+static int	cfg_variance_us	= 4000;
+
+static uint64_t glob_tstart;
+
+/* encode one timed transmission (of a 1B payload) */
+struct timed_send {
+	char	data;
+	int64_t	delay_us;
+};
+
+#define MAX_NUM_PKT	8
+static struct timed_send cfg_in[MAX_NUM_PKT];
+static struct timed_send cfg_out[MAX_NUM_PKT];
+static int cfg_num_pkt;
+
+static int cfg_errq_level;
+static int cfg_errq_type;
+
+static uint64_t gettime_ns(void)
+{
+	struct timespec ts;
+
+	if (clock_gettime(cfg_clockid, &ts))
+		error(1, errno, "gettime");
+
+	return ts.tv_sec * (1000ULL * 1000 * 1000) + ts.tv_nsec;
+}
+
+static void do_send_one(int fdt, struct timed_send *ts)
+{
+	char control[CMSG_SPACE(sizeof(uint64_t))];
+	struct msghdr msg = {0};
+	struct iovec iov = {0};
+	struct cmsghdr *cm;
+	uint64_t tdeliver;
+	int ret;
+
+	iov.iov_base = &ts->data;
+	iov.iov_len = 1;
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	if (ts->delay_us >= 0) {
+		memset(control, 0, sizeof(control));
+		msg.msg_control = &control;
+		msg.msg_controllen = sizeof(control);
+
+		tdeliver = glob_tstart + ts->delay_us * 1000;
+
+		cm = CMSG_FIRSTHDR(&msg);
+		cm->cmsg_level = SOL_SOCKET;
+		cm->cmsg_type = SCM_TXTIME;
+		cm->cmsg_len = CMSG_LEN(sizeof(tdeliver));
+		memcpy(CMSG_DATA(cm), &tdeliver, sizeof(tdeliver));
+	}
+
+	ret = sendmsg(fdt, &msg, 0);
+	if (ret == -1)
+		error(1, errno, "write");
+	if (ret == 0)
+		error(1, 0, "write: 0B");
+
+}
+
+static bool do_recv_one(int fdr, struct timed_send *ts)
+{
+	int64_t tstop, texpect;
+	char rbuf[2];
+	int ret;
+
+	ret = recv(fdr, rbuf, sizeof(rbuf), 0);
+	if (ret == -1 && errno == EAGAIN)
+		return true;
+	if (ret == -1)
+		error(1, errno, "read");
+	if (ret != 1)
+		error(1, 0, "read: %dB", ret);
+
+	tstop = (gettime_ns() - glob_tstart) / 1000;
+	texpect = ts->delay_us >= 0 ? ts->delay_us : 0;
+
+	fprintf(stderr, "payload:%c delay:%lld expected:%lld (us)\n",
+			rbuf[0], (long long)tstop, (long long)texpect);
+
+	if (rbuf[0] != ts->data)
+		error(1, 0, "payload mismatch. expected %c", ts->data);
+
+	if (llabs(tstop - texpect) > cfg_variance_us)
+		error(1, 0, "exceeds variance (%d us)", cfg_variance_us);
+
+	return false;
+}
+
+static void do_recv_verify_empty(int fdr)
+{
+	char rbuf[1];
+	int ret;
+
+	ret = recv(fdr, rbuf, sizeof(rbuf), 0);
+	if (ret != -1 || errno != EAGAIN)
+		error(1, 0, "recv: not empty as expected (%d, %d)", ret, errno);
+}
+
+static void do_recv_errqueue_timeout(int fdt)
+{
+	char control[CMSG_SPACE(sizeof(struct sock_extended_err)) +
+		     CMSG_SPACE(sizeof(struct sockaddr_in6))] = {0};
+	char data[sizeof(struct ethhdr) + sizeof(struct ipv6hdr) +
+		  sizeof(struct udphdr) + 1];
+	struct sock_extended_err *err;
+	struct msghdr msg = {0};
+	struct iovec iov = {0};
+	struct cmsghdr *cm;
+	int64_t tstamp = 0;
+	int ret;
+
+	iov.iov_base = data;
+	iov.iov_len = sizeof(data);
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	msg.msg_control = control;
+	msg.msg_controllen = sizeof(control);
+
+	while (1) {
+		const char *reason;
+
+		ret = recvmsg(fdt, &msg, MSG_ERRQUEUE);
+		if (ret == -1 && errno == EAGAIN)
+			break;
+		if (ret == -1)
+			error(1, errno, "errqueue");
+		if (msg.msg_flags != MSG_ERRQUEUE)
+			error(1, 0, "errqueue: flags 0x%x\n", msg.msg_flags);
+
+		cm = CMSG_FIRSTHDR(&msg);
+		if (cm->cmsg_level != cfg_errq_level ||
+		    cm->cmsg_type != cfg_errq_type)
+			error(1, 0, "errqueue: type 0x%x.0x%x\n",
+				    cm->cmsg_level, cm->cmsg_type);
+
+		err = (struct sock_extended_err *)CMSG_DATA(cm);
+		if (err->ee_origin != SO_EE_ORIGIN_TXTIME)
+			error(1, 0, "errqueue: origin 0x%x\n", err->ee_origin);
+
+		switch (err->ee_errno) {
+		case ECANCELED:
+			if (err->ee_code != SO_EE_CODE_TXTIME_MISSED)
+				error(1, 0, "errqueue: unknown ECANCELED %u\n",
+				      err->ee_code);
+			reason = "missed txtime";
+		break;
+		case EINVAL:
+			if (err->ee_code != SO_EE_CODE_TXTIME_INVALID_PARAM)
+				error(1, 0, "errqueue: unknown EINVAL %u\n",
+				      err->ee_code);
+			reason = "invalid txtime";
+		break;
+		default:
+			error(1, 0, "errqueue: errno %u code %u\n",
+			      err->ee_errno, err->ee_code);
+		};
+
+		tstamp = ((int64_t) err->ee_data) << 32 | err->ee_info;
+		tstamp -= (int64_t) glob_tstart;
+		tstamp /= 1000 * 1000;
+		fprintf(stderr, "send: pkt %c at %" PRId64 "ms dropped: %s\n",
+			data[ret - 1], tstamp, reason);
+
+		msg.msg_flags = 0;
+		msg.msg_controllen = sizeof(control);
+	}
+
+	error(1, 0, "recv: timeout");
+}
+
+static void setsockopt_txtime(int fd)
+{
+	struct sock_txtime so_txtime_val = { .clockid = cfg_clockid };
+	struct sock_txtime so_txtime_val_read = { 0 };
+	socklen_t vallen = sizeof(so_txtime_val);
+
+	so_txtime_val.flags = SOF_TXTIME_REPORT_ERRORS;
+
+	if (setsockopt(fd, SOL_SOCKET, SO_TXTIME,
+		       &so_txtime_val, sizeof(so_txtime_val)))
+		error(1, errno, "setsockopt txtime");
+
+	if (getsockopt(fd, SOL_SOCKET, SO_TXTIME,
+		       &so_txtime_val_read, &vallen))
+		error(1, errno, "getsockopt txtime");
+
+	if (vallen != sizeof(so_txtime_val) ||
+	    memcmp(&so_txtime_val, &so_txtime_val_read, vallen))
+		error(1, 0, "getsockopt txtime: mismatch");
+}
+
+static int setup_tx(struct sockaddr *addr, socklen_t alen)
+{
+	int fd;
+
+	fd = socket(addr->sa_family, SOCK_DGRAM, 0);
+	if (fd == -1)
+		error(1, errno, "socket t");
+
+	if (connect(fd, addr, alen))
+		error(1, errno, "connect");
+
+	setsockopt_txtime(fd);
+
+	return fd;
+}
+
+static int setup_rx(struct sockaddr *addr, socklen_t alen)
+{
+	struct timeval tv = { .tv_usec = 100 * 1000 };
+	int fd;
+
+	fd = socket(addr->sa_family, SOCK_DGRAM, 0);
+	if (fd == -1)
+		error(1, errno, "socket r");
+
+	if (bind(fd, addr, alen))
+		error(1, errno, "bind");
+
+	if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)))
+		error(1, errno, "setsockopt rcv timeout");
+
+	return fd;
+}
+
+static void do_test(struct sockaddr *addr, socklen_t alen)
+{
+	int fdt, fdr, i;
+
+	fprintf(stderr, "\nSO_TXTIME ipv%c clock %s\n",
+			addr->sa_family == PF_INET ? '4' : '6',
+			cfg_clockid == CLOCK_TAI ? "tai" : "monotonic");
+
+	fdt = setup_tx(addr, alen);
+	fdr = setup_rx(addr, alen);
+
+	glob_tstart = gettime_ns();
+
+	for (i = 0; i < cfg_num_pkt; i++)
+		do_send_one(fdt, &cfg_in[i]);
+	for (i = 0; i < cfg_num_pkt; i++)
+		if (do_recv_one(fdr, &cfg_out[i]))
+			do_recv_errqueue_timeout(fdt);
+
+	do_recv_verify_empty(fdr);
+
+	if (close(fdr))
+		error(1, errno, "close r");
+	if (close(fdt))
+		error(1, errno, "close t");
+}
+
+static int parse_io(const char *optarg, struct timed_send *array)
+{
+	char *arg, *tok;
+	int aoff = 0;
+
+	arg = strdup(optarg);
+	if (!arg)
+		error(1, errno, "strdup");
+
+	while ((tok = strtok(arg, ","))) {
+		arg = NULL;	/* only pass non-zero on first call */
+
+		if (aoff / 2 == MAX_NUM_PKT)
+			error(1, 0, "exceeds max pkt count (%d)", MAX_NUM_PKT);
+
+		if (aoff & 1) {	/* parse delay */
+			array->delay_us = strtol(tok, NULL, 0) * 1000;
+			array++;
+		} else {	/* parse character */
+			array->data = tok[0];
+		}
+
+		aoff++;
+	}
+
+	free(arg);
+
+	return aoff / 2;
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c, ilen, olen;
+
+	while ((c = getopt(argc, argv, "46c:")) != -1) {
+		switch (c) {
+		case '4':
+			cfg_do_ipv4 = true;
+			break;
+		case '6':
+			cfg_do_ipv6 = true;
+			break;
+		case 'c':
+			if (!strcmp(optarg, "tai"))
+				cfg_clockid = CLOCK_TAI;
+			else if (!strcmp(optarg, "monotonic") ||
+				 !strcmp(optarg, "mono"))
+				cfg_clockid = CLOCK_MONOTONIC;
+			else
+				error(1, 0, "unknown clock id %s", optarg);
+			break;
+		default:
+			error(1, 0, "parse error at %d", optind);
+		}
+	}
+
+	if (argc - optind != 2)
+		error(1, 0, "Usage: %s [-46] -c <clock> <in> <out>", argv[0]);
+
+	ilen = parse_io(argv[optind], cfg_in);
+	olen = parse_io(argv[optind + 1], cfg_out);
+	if (ilen != olen)
+		error(1, 0, "i/o streams len mismatch (%d, %d)\n", ilen, olen);
+	cfg_num_pkt = ilen;
+}
+
+int main(int argc, char **argv)
+{
+	parse_opts(argc, argv);
+
+	if (cfg_do_ipv6) {
+		struct sockaddr_in6 addr6 = {0};
+
+		addr6.sin6_family = AF_INET6;
+		addr6.sin6_port = htons(cfg_port);
+		addr6.sin6_addr = in6addr_loopback;
+
+		cfg_errq_level = SOL_IPV6;
+		cfg_errq_type = IPV6_RECVERR;
+
+		do_test((void *)&addr6, sizeof(addr6));
+	}
+
+	if (cfg_do_ipv4) {
+		struct sockaddr_in addr4 = {0};
+
+		addr4.sin_family = AF_INET;
+		addr4.sin_port = htons(cfg_port);
+		addr4.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+		cfg_errq_level = SOL_IP;
+		cfg_errq_type = IP_RECVERR;
+
+		do_test((void *)&addr4, sizeof(addr4));
+	}
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/so_txtime.sh b/tools/testing/selftests/net/so_txtime.sh
new file mode 100755
index 000000000..3f7800eae
--- /dev/null
+++ b/tools/testing/selftests/net/so_txtime.sh
@@ -0,0 +1,36 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Regression tests for the SO_TXTIME interface
+
+# Run in network namespace
+if [[ $# -eq 0 ]]; then
+	if ! ./in_netns.sh $0 __subprocess; then
+		# test is time sensitive, can be flaky
+		echo "test failed: retry once"
+		./in_netns.sh $0 __subprocess
+	fi
+
+	exit $?
+fi
+
+set -e
+
+tc qdisc add dev lo root fq
+./so_txtime -4 -6 -c mono a,-1 a,-1
+./so_txtime -4 -6 -c mono a,0 a,0
+./so_txtime -4 -6 -c mono a,10 a,10
+./so_txtime -4 -6 -c mono a,10,b,20 a,10,b,20
+./so_txtime -4 -6 -c mono a,20,b,10 b,20,a,20
+
+if tc qdisc replace dev lo root etf clockid CLOCK_TAI delta 400000; then
+	! ./so_txtime -4 -6 -c tai a,-1 a,-1
+	! ./so_txtime -4 -6 -c tai a,0 a,0
+	./so_txtime -4 -6 -c tai a,10 a,10
+	./so_txtime -4 -6 -c tai a,10,b,20 a,10,b,20
+	./so_txtime -4 -6 -c tai a,20,b,10 b,10,a,20
+else
+	echo "tc ($(tc -V)) does not support qdisc etf. skipping"
+fi
+
+echo OK. All tests passed
diff --git a/tools/testing/selftests/net/socket.c b/tools/testing/selftests/net/socket.c
new file mode 100644
index 000000000..afca1ead6
--- /dev/null
+++ b/tools/testing/selftests/net/socket.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+
+struct socket_testcase {
+	int	domain;
+	int	type;
+	int	protocol;
+
+	/* 0    = valid file descriptor
+	 * -foo = error foo
+	 */
+	int	expect;
+
+	/* If non-zero, accept EAFNOSUPPORT to handle the case
+	 * of the protocol not being configured into the kernel.
+	 */
+	int	nosupport_ok;
+};
+
+static struct socket_testcase tests[] = {
+	{ AF_MAX,  0,           0,           -EAFNOSUPPORT,    0 },
+	{ AF_INET, SOCK_STREAM, IPPROTO_TCP, 0,                1  },
+	{ AF_INET, SOCK_DGRAM,  IPPROTO_TCP, -EPROTONOSUPPORT, 1  },
+	{ AF_INET, SOCK_DGRAM,  IPPROTO_UDP, 0,                1  },
+	{ AF_INET, SOCK_STREAM, IPPROTO_UDP, -EPROTONOSUPPORT, 1  },
+};
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+#define ERR_STRING_SZ	64
+
+static int run_tests(void)
+{
+	char err_string1[ERR_STRING_SZ];
+	char err_string2[ERR_STRING_SZ];
+	int i, err;
+
+	err = 0;
+	for (i = 0; i < ARRAY_SIZE(tests); i++) {
+		struct socket_testcase *s = &tests[i];
+		int fd;
+
+		fd = socket(s->domain, s->type, s->protocol);
+		if (fd < 0) {
+			if (s->nosupport_ok &&
+			    errno == EAFNOSUPPORT)
+				continue;
+
+			if (s->expect < 0 &&
+			    errno == -s->expect)
+				continue;
+
+			strerror_r(-s->expect, err_string1, ERR_STRING_SZ);
+			strerror_r(errno, err_string2, ERR_STRING_SZ);
+
+			fprintf(stderr, "socket(%d, %d, %d) expected "
+				"err (%s) got (%s)\n",
+				s->domain, s->type, s->protocol,
+				err_string1, err_string2);
+
+			err = -1;
+			break;
+		} else {
+			close(fd);
+
+			if (s->expect < 0) {
+				strerror_r(errno, err_string1, ERR_STRING_SZ);
+
+				fprintf(stderr, "socket(%d, %d, %d) expected "
+					"success got err (%s)\n",
+					s->domain, s->type, s->protocol,
+					err_string1);
+
+				err = -1;
+				break;
+			}
+		}
+	}
+
+	return err;
+}
+
+int main(void)
+{
+	int err = run_tests();
+
+	return err;
+}
diff --git a/tools/testing/selftests/net/tcp_fastopen_backup_key.c b/tools/testing/selftests/net/tcp_fastopen_backup_key.c
new file mode 100644
index 000000000..9c55ec44f
--- /dev/null
+++ b/tools/testing/selftests/net/tcp_fastopen_backup_key.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Test key rotation for TFO.
+ * New keys are 'rotated' in two steps:
+ * 1) Add new key as the 'backup' key 'behind' the primary key
+ * 2) Make new key the primary by swapping the backup and primary keys
+ *
+ * The rotation is done in stages using multiple sockets bound
+ * to the same port via SO_REUSEPORT. This simulates key rotation
+ * behind say a load balancer. We verify that across the rotation
+ * there are no cases in which a cookie is not accepted by verifying
+ * that TcpExtTCPFastOpenPassiveFail remains 0.
+ */
+#define _GNU_SOURCE
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/epoll.h>
+#include <unistd.h>
+#include <netinet/tcp.h>
+#include <fcntl.h>
+#include <time.h>
+
+#ifndef TCP_FASTOPEN_KEY
+#define TCP_FASTOPEN_KEY 33
+#endif
+
+#define N_LISTEN 10
+#define PROC_FASTOPEN_KEY "/proc/sys/net/ipv4/tcp_fastopen_key"
+#define KEY_LENGTH 16
+
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+#endif
+
+static bool do_ipv6;
+static bool do_sockopt;
+static bool do_rotate;
+static int key_len = KEY_LENGTH;
+static int rcv_fds[N_LISTEN];
+static int proc_fd;
+static const char *IP4_ADDR = "127.0.0.1";
+static const char *IP6_ADDR = "::1";
+static const int PORT = 8891;
+
+static void get_keys(int fd, uint32_t *keys)
+{
+	char buf[128];
+	socklen_t len = KEY_LENGTH * 2;
+
+	if (do_sockopt) {
+		if (getsockopt(fd, SOL_TCP, TCP_FASTOPEN_KEY, keys, &len))
+			error(1, errno, "Unable to get key");
+		return;
+	}
+	lseek(proc_fd, 0, SEEK_SET);
+	if (read(proc_fd, buf, sizeof(buf)) <= 0)
+		error(1, errno, "Unable to read %s", PROC_FASTOPEN_KEY);
+	if (sscanf(buf, "%x-%x-%x-%x,%x-%x-%x-%x", keys, keys + 1, keys + 2,
+	    keys + 3, keys + 4, keys + 5, keys + 6, keys + 7) != 8)
+		error(1, 0, "Unable to parse %s", PROC_FASTOPEN_KEY);
+}
+
+static void set_keys(int fd, uint32_t *keys)
+{
+	char buf[128];
+
+	if (do_sockopt) {
+		if (setsockopt(fd, SOL_TCP, TCP_FASTOPEN_KEY, keys,
+		    key_len))
+			error(1, errno, "Unable to set key");
+		return;
+	}
+	if (do_rotate)
+		snprintf(buf, 128, "%08x-%08x-%08x-%08x,%08x-%08x-%08x-%08x",
+			 keys[0], keys[1], keys[2], keys[3], keys[4], keys[5],
+			 keys[6], keys[7]);
+	else
+		snprintf(buf, 128, "%08x-%08x-%08x-%08x",
+			 keys[0], keys[1], keys[2], keys[3]);
+	lseek(proc_fd, 0, SEEK_SET);
+	if (write(proc_fd, buf, sizeof(buf)) <= 0)
+		error(1, errno, "Unable to write %s", PROC_FASTOPEN_KEY);
+}
+
+static void build_rcv_fd(int family, int proto, int *rcv_fds)
+{
+	struct sockaddr_in  addr4 = {0};
+	struct sockaddr_in6 addr6 = {0};
+	struct sockaddr *addr;
+	int opt = 1, i, sz;
+	int qlen = 100;
+	uint32_t keys[8];
+
+	switch (family) {
+	case AF_INET:
+		addr4.sin_family = family;
+		addr4.sin_addr.s_addr = htonl(INADDR_ANY);
+		addr4.sin_port = htons(PORT);
+		sz = sizeof(addr4);
+		addr = (struct sockaddr *)&addr4;
+		break;
+	case AF_INET6:
+		addr6.sin6_family = AF_INET6;
+		addr6.sin6_addr = in6addr_any;
+		addr6.sin6_port = htons(PORT);
+		sz = sizeof(addr6);
+		addr = (struct sockaddr *)&addr6;
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+		/* clang does not recognize error() above as terminating
+		 * the program, so it complains that saddr, sz are
+		 * not initialized when this code path is taken. Silence it.
+		 */
+		return;
+	}
+	for (i = 0; i < ARRAY_SIZE(keys); i++)
+		keys[i] = rand();
+	for (i = 0; i < N_LISTEN; i++) {
+		rcv_fds[i] = socket(family, proto, 0);
+		if (rcv_fds[i] < 0)
+			error(1, errno, "failed to create receive socket");
+		if (setsockopt(rcv_fds[i], SOL_SOCKET, SO_REUSEPORT, &opt,
+			       sizeof(opt)))
+			error(1, errno, "failed to set SO_REUSEPORT");
+		if (bind(rcv_fds[i], addr, sz))
+			error(1, errno, "failed to bind receive socket");
+		if (setsockopt(rcv_fds[i], SOL_TCP, TCP_FASTOPEN, &qlen,
+			       sizeof(qlen)))
+			error(1, errno, "failed to set TCP_FASTOPEN");
+		set_keys(rcv_fds[i], keys);
+		if (proto == SOCK_STREAM && listen(rcv_fds[i], 10))
+			error(1, errno, "failed to listen on receive port");
+	}
+}
+
+static int connect_and_send(int family, int proto)
+{
+	struct sockaddr_in  saddr4 = {0};
+	struct sockaddr_in  daddr4 = {0};
+	struct sockaddr_in6 saddr6 = {0};
+	struct sockaddr_in6 daddr6 = {0};
+	struct sockaddr *saddr, *daddr;
+	int fd, sz, ret;
+	char data[1];
+
+	switch (family) {
+	case AF_INET:
+		saddr4.sin_family = AF_INET;
+		saddr4.sin_addr.s_addr = htonl(INADDR_ANY);
+		saddr4.sin_port = 0;
+
+		daddr4.sin_family = AF_INET;
+		if (!inet_pton(family, IP4_ADDR, &daddr4.sin_addr.s_addr))
+			error(1, errno, "inet_pton failed: %s", IP4_ADDR);
+		daddr4.sin_port = htons(PORT);
+
+		sz = sizeof(saddr4);
+		saddr = (struct sockaddr *)&saddr4;
+		daddr = (struct sockaddr *)&daddr4;
+		break;
+	case AF_INET6:
+		saddr6.sin6_family = AF_INET6;
+		saddr6.sin6_addr = in6addr_any;
+
+		daddr6.sin6_family = AF_INET6;
+		if (!inet_pton(family, IP6_ADDR, &daddr6.sin6_addr))
+			error(1, errno, "inet_pton failed: %s", IP6_ADDR);
+		daddr6.sin6_port = htons(PORT);
+
+		sz = sizeof(saddr6);
+		saddr = (struct sockaddr *)&saddr6;
+		daddr = (struct sockaddr *)&daddr6;
+		break;
+	default:
+		error(1, 0, "Unsupported family %d", family);
+		/* clang does not recognize error() above as terminating
+		 * the program, so it complains that saddr, daddr, sz are
+		 * not initialized when this code path is taken. Silence it.
+		 */
+		return -1;
+	}
+	fd = socket(family, proto, 0);
+	if (fd < 0)
+		error(1, errno, "failed to create send socket");
+	if (bind(fd, saddr, sz))
+		error(1, errno, "failed to bind send socket");
+	data[0] = 'a';
+	ret = sendto(fd, data, 1, MSG_FASTOPEN, daddr, sz);
+	if (ret != 1)
+		error(1, errno, "failed to sendto");
+
+	return fd;
+}
+
+static bool is_listen_fd(int fd)
+{
+	int i;
+
+	for (i = 0; i < N_LISTEN; i++) {
+		if (rcv_fds[i] == fd)
+			return true;
+	}
+	return false;
+}
+
+static void rotate_key(int fd)
+{
+	static int iter;
+	static uint32_t new_key[4];
+	uint32_t keys[8];
+	uint32_t tmp_key[4];
+	int i;
+
+	if (iter < N_LISTEN) {
+		/* first set new key as backups */
+		if (iter == 0) {
+			for (i = 0; i < ARRAY_SIZE(new_key); i++)
+				new_key[i] = rand();
+		}
+		get_keys(fd, keys);
+		memcpy(keys + 4, new_key, KEY_LENGTH);
+		set_keys(fd, keys);
+	} else {
+		/* swap the keys */
+		get_keys(fd, keys);
+		memcpy(tmp_key, keys + 4, KEY_LENGTH);
+		memcpy(keys + 4, keys, KEY_LENGTH);
+		memcpy(keys, tmp_key, KEY_LENGTH);
+		set_keys(fd, keys);
+	}
+	if (++iter >= (N_LISTEN * 2))
+		iter = 0;
+}
+
+static void run_one_test(int family)
+{
+	struct epoll_event ev;
+	int i, send_fd;
+	int n_loops = 10000;
+	int rotate_key_fd = 0;
+	int key_rotate_interval = 50;
+	int fd, epfd;
+	char buf[1];
+
+	build_rcv_fd(family, SOCK_STREAM, rcv_fds);
+	epfd = epoll_create(1);
+	if (epfd < 0)
+		error(1, errno, "failed to create epoll");
+	ev.events = EPOLLIN;
+	for (i = 0; i < N_LISTEN; i++) {
+		ev.data.fd = rcv_fds[i];
+		if (epoll_ctl(epfd, EPOLL_CTL_ADD, rcv_fds[i], &ev))
+			error(1, errno, "failed to register sock epoll");
+	}
+	while (n_loops--) {
+		send_fd = connect_and_send(family, SOCK_STREAM);
+		if (do_rotate && ((n_loops % key_rotate_interval) == 0)) {
+			rotate_key(rcv_fds[rotate_key_fd]);
+			if (++rotate_key_fd >= N_LISTEN)
+				rotate_key_fd = 0;
+		}
+		while (1) {
+			i = epoll_wait(epfd, &ev, 1, -1);
+			if (i < 0)
+				error(1, errno, "epoll_wait failed");
+			if (is_listen_fd(ev.data.fd)) {
+				fd = accept(ev.data.fd, NULL, NULL);
+				if (fd < 0)
+					error(1, errno, "failed to accept");
+				ev.data.fd = fd;
+				if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd, &ev))
+					error(1, errno, "failed epoll add");
+				continue;
+			}
+			i = recv(ev.data.fd, buf, sizeof(buf), 0);
+			if (i != 1)
+				error(1, errno, "failed recv data");
+			if (epoll_ctl(epfd, EPOLL_CTL_DEL, ev.data.fd, NULL))
+				error(1, errno, "failed epoll del");
+			close(ev.data.fd);
+			break;
+		}
+		close(send_fd);
+	}
+	for (i = 0; i < N_LISTEN; i++)
+		close(rcv_fds[i]);
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c;
+
+	while ((c = getopt(argc, argv, "46sr")) != -1) {
+		switch (c) {
+		case '4':
+			do_ipv6 = false;
+			break;
+		case '6':
+			do_ipv6 = true;
+			break;
+		case 's':
+			do_sockopt = true;
+			break;
+		case 'r':
+			do_rotate = true;
+			key_len = KEY_LENGTH * 2;
+			break;
+		default:
+			error(1, 0, "%s: parse error", argv[0]);
+		}
+	}
+}
+
+int main(int argc, char **argv)
+{
+	parse_opts(argc, argv);
+	proc_fd = open(PROC_FASTOPEN_KEY, O_RDWR);
+	if (proc_fd < 0)
+		error(1, errno, "Unable to open %s", PROC_FASTOPEN_KEY);
+	srand(time(NULL));
+	if (do_ipv6)
+		run_one_test(AF_INET6);
+	else
+		run_one_test(AF_INET);
+	close(proc_fd);
+	fprintf(stderr, "PASS\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/tcp_fastopen_backup_key.sh b/tools/testing/selftests/net/tcp_fastopen_backup_key.sh
new file mode 100755
index 000000000..f6e65674b
--- /dev/null
+++ b/tools/testing/selftests/net/tcp_fastopen_backup_key.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# rotate TFO keys for ipv4/ipv6 and verify that the client does
+# not present an invalid cookie.
+
+set +x
+set -e
+
+readonly NETNS="ns-$(mktemp -u XXXXXX)"
+
+setup() {
+	ip netns add "${NETNS}"
+	ip -netns "${NETNS}" link set lo up
+	ip netns exec "${NETNS}" sysctl -w net.ipv4.tcp_fastopen=3 \
+		>/dev/null 2>&1
+}
+
+cleanup() {
+	ip netns del "${NETNS}"
+}
+
+trap cleanup EXIT
+setup
+
+do_test() {
+	# flush routes before each run, otherwise successive runs can
+	# initially present an old TFO cookie
+	ip netns exec "${NETNS}" ip tcp_metrics flush
+	ip netns exec "${NETNS}" ./tcp_fastopen_backup_key "$1"
+	val=$(ip netns exec "${NETNS}" nstat -az | \
+		grep TcpExtTCPFastOpenPassiveFail | awk '{print $2}')
+	if [ "$val" != 0 ]; then
+		echo "FAIL: TcpExtTCPFastOpenPassiveFail non-zero"
+		return 1
+	fi
+}
+
+do_test "-4"
+do_test "-6"
+do_test "-4"
+do_test "-6"
+do_test "-4s"
+do_test "-6s"
+do_test "-4s"
+do_test "-6s"
+do_test "-4r"
+do_test "-6r"
+do_test "-4r"
+do_test "-6r"
+do_test "-4sr"
+do_test "-6sr"
+do_test "-4sr"
+do_test "-6sr"
+echo "all tests done"
diff --git a/tools/testing/selftests/net/tcp_inq.c b/tools/testing/selftests/net/tcp_inq.c
new file mode 100644
index 000000000..bd6a9c7a3
--- /dev/null
+++ b/tools/testing/selftests/net/tcp_inq.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2018 Google Inc.
+ * Author: Soheil Hassas Yeganeh (soheil@google.com)
+ *
+ * Simple example on how to use TCP_INQ and TCP_CM_INQ.
+ */
+#define _GNU_SOURCE
+
+#include <error.h>
+#include <netinet/in.h>
+#include <netinet/tcp.h>
+#include <pthread.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <unistd.h>
+
+#ifndef TCP_INQ
+#define TCP_INQ 36
+#endif
+
+#ifndef TCP_CM_INQ
+#define TCP_CM_INQ TCP_INQ
+#endif
+
+#define BUF_SIZE 8192
+#define CMSG_SIZE 32
+
+static int family = AF_INET6;
+static socklen_t addr_len = sizeof(struct sockaddr_in6);
+static int port = 4974;
+
+static void setup_loopback_addr(int family, struct sockaddr_storage *sockaddr)
+{
+	struct sockaddr_in6 *addr6 = (void *) sockaddr;
+	struct sockaddr_in *addr4 = (void *) sockaddr;
+
+	switch (family) {
+	case PF_INET:
+		memset(addr4, 0, sizeof(*addr4));
+		addr4->sin_family = AF_INET;
+		addr4->sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+		addr4->sin_port = htons(port);
+		break;
+	case PF_INET6:
+		memset(addr6, 0, sizeof(*addr6));
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_addr = in6addr_loopback;
+		addr6->sin6_port = htons(port);
+		break;
+	default:
+		error(1, 0, "illegal family");
+	}
+}
+
+void *start_server(void *arg)
+{
+	int server_fd = (int)(unsigned long)arg;
+	struct sockaddr_in addr;
+	socklen_t addrlen = sizeof(addr);
+	char *buf;
+	int fd;
+	int r;
+
+	buf = malloc(BUF_SIZE);
+
+	for (;;) {
+		fd = accept(server_fd, (struct sockaddr *)&addr, &addrlen);
+		if (fd == -1) {
+			perror("accept");
+			break;
+		}
+		do {
+			r = send(fd, buf, BUF_SIZE, 0);
+		} while (r < 0 && errno == EINTR);
+		if (r < 0)
+			perror("send");
+		if (r != BUF_SIZE)
+			fprintf(stderr, "can only send %d bytes\n", r);
+		/* TCP_INQ can overestimate in-queue by one byte if we send
+		 * the FIN packet. Sleep for 1 second, so that the client
+		 * likely invoked recvmsg().
+		 */
+		sleep(1);
+		close(fd);
+	}
+
+	free(buf);
+	close(server_fd);
+	pthread_exit(0);
+}
+
+int main(int argc, char *argv[])
+{
+	struct sockaddr_storage listen_addr, addr;
+	int c, one = 1, inq = -1;
+	pthread_t server_thread;
+	char cmsgbuf[CMSG_SIZE];
+	struct iovec iov[1];
+	struct cmsghdr *cm;
+	struct msghdr msg;
+	int server_fd, fd;
+	char *buf;
+
+	while ((c = getopt(argc, argv, "46p:")) != -1) {
+		switch (c) {
+		case '4':
+			family = PF_INET;
+			addr_len = sizeof(struct sockaddr_in);
+			break;
+		case '6':
+			family = PF_INET6;
+			addr_len = sizeof(struct sockaddr_in6);
+			break;
+		case 'p':
+			port = atoi(optarg);
+			break;
+		}
+	}
+
+	server_fd = socket(family, SOCK_STREAM, 0);
+	if (server_fd < 0)
+		error(1, errno, "server socket");
+	setup_loopback_addr(family, &listen_addr);
+	if (setsockopt(server_fd, SOL_SOCKET, SO_REUSEADDR,
+		       &one, sizeof(one)) != 0)
+		error(1, errno, "setsockopt(SO_REUSEADDR)");
+	if (bind(server_fd, (const struct sockaddr *)&listen_addr,
+		 addr_len) == -1)
+		error(1, errno, "bind");
+	if (listen(server_fd, 128) == -1)
+		error(1, errno, "listen");
+	if (pthread_create(&server_thread, NULL, start_server,
+			   (void *)(unsigned long)server_fd) != 0)
+		error(1, errno, "pthread_create");
+
+	fd = socket(family, SOCK_STREAM, 0);
+	if (fd < 0)
+		error(1, errno, "client socket");
+	setup_loopback_addr(family, &addr);
+	if (connect(fd, (const struct sockaddr *)&addr, addr_len) == -1)
+		error(1, errno, "connect");
+	if (setsockopt(fd, SOL_TCP, TCP_INQ, &one, sizeof(one)) != 0)
+		error(1, errno, "setsockopt(TCP_INQ)");
+
+	msg.msg_name = NULL;
+	msg.msg_namelen = 0;
+	msg.msg_iov = iov;
+	msg.msg_iovlen = 1;
+	msg.msg_control = cmsgbuf;
+	msg.msg_controllen = sizeof(cmsgbuf);
+	msg.msg_flags = 0;
+
+	buf = malloc(BUF_SIZE);
+	iov[0].iov_base = buf;
+	iov[0].iov_len = BUF_SIZE / 2;
+
+	if (recvmsg(fd, &msg, 0) != iov[0].iov_len)
+		error(1, errno, "recvmsg");
+	if (msg.msg_flags & MSG_CTRUNC)
+		error(1, 0, "control message is truncated");
+
+	for (cm = CMSG_FIRSTHDR(&msg); cm; cm = CMSG_NXTHDR(&msg, cm))
+		if (cm->cmsg_level == SOL_TCP && cm->cmsg_type == TCP_CM_INQ)
+			inq = *((int *) CMSG_DATA(cm));
+
+	if (inq != BUF_SIZE - iov[0].iov_len) {
+		fprintf(stderr, "unexpected inq: %d\n", inq);
+		exit(1);
+	}
+
+	printf("PASSED\n");
+	free(buf);
+	close(fd);
+	return 0;
+}
diff --git a/tools/testing/selftests/net/tcp_mmap.c b/tools/testing/selftests/net/tcp_mmap.c
new file mode 100644
index 000000000..00f837c9b
--- /dev/null
+++ b/tools/testing/selftests/net/tcp_mmap.c
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2018 Google Inc.
+ * Author: Eric Dumazet (edumazet@google.com)
+ *
+ * Reference program demonstrating tcp mmap() usage,
+ * and SO_RCVLOWAT hints for receiver.
+ *
+ * Note : NIC with header split is needed to use mmap() on TCP :
+ * Each incoming frame must be a multiple of PAGE_SIZE bytes of TCP payload.
+ *
+ * How to use on loopback interface :
+ *
+ *  ifconfig lo mtu 61512  # 15*4096 + 40 (ipv6 header) + 32 (TCP with TS option header)
+ *  tcp_mmap -s -z &
+ *  tcp_mmap -H ::1 -z
+ *
+ *  Or leave default lo mtu, but use -M option to set TCP_MAXSEG option to (4096 + 12)
+ *      (4096 : page size on x86, 12: TCP TS option length)
+ *  tcp_mmap -s -z -M $((4096+12)) &
+ *  tcp_mmap -H ::1 -z -M $((4096+12))
+ *
+ * Note: -z option on sender uses MSG_ZEROCOPY, which forces a copy when packets go through loopback interface.
+ *       We might use sendfile() instead, but really this test program is about mmap(), for receivers ;)
+ *
+ * $ ./tcp_mmap -s &                                 # Without mmap()
+ * $ for i in {1..4}; do ./tcp_mmap -H ::1 -z ; done
+ * received 32768 MB (0 % mmap'ed) in 14.1157 s, 19.4732 Gbit
+ *   cpu usage user:0.057 sys:7.815, 240.234 usec per MB, 65531 c-switches
+ * received 32768 MB (0 % mmap'ed) in 14.6833 s, 18.7204 Gbit
+ *  cpu usage user:0.043 sys:8.103, 248.596 usec per MB, 65524 c-switches
+ * received 32768 MB (0 % mmap'ed) in 11.143 s, 24.6682 Gbit
+ *   cpu usage user:0.044 sys:6.576, 202.026 usec per MB, 65519 c-switches
+ * received 32768 MB (0 % mmap'ed) in 14.9056 s, 18.4413 Gbit
+ *   cpu usage user:0.036 sys:8.193, 251.129 usec per MB, 65530 c-switches
+ * $ kill %1   # kill tcp_mmap server
+ *
+ * $ ./tcp_mmap -s -z &                              # With mmap()
+ * $ for i in {1..4}; do ./tcp_mmap -H ::1 -z ; done
+ * received 32768 MB (99.9939 % mmap'ed) in 6.73792 s, 40.7956 Gbit
+ *   cpu usage user:0.045 sys:2.827, 87.6465 usec per MB, 65532 c-switches
+ * received 32768 MB (99.9939 % mmap'ed) in 7.26732 s, 37.8238 Gbit
+ *   cpu usage user:0.037 sys:3.087, 95.3369 usec per MB, 65532 c-switches
+ * received 32768 MB (99.9939 % mmap'ed) in 7.61661 s, 36.0893 Gbit
+ *   cpu usage user:0.046 sys:3.559, 110.016 usec per MB, 65529 c-switches
+ * received 32768 MB (99.9939 % mmap'ed) in 7.43764 s, 36.9577 Gbit
+ *   cpu usage user:0.035 sys:3.467, 106.873 usec per MB, 65530 c-switches
+ */
+#define _GNU_SOURCE
+#include <pthread.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <error.h>
+#include <sys/socket.h>
+#include <sys/mman.h>
+#include <sys/resource.h>
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <errno.h>
+#include <time.h>
+#include <sys/time.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <poll.h>
+#include <linux/tcp.h>
+#include <assert.h>
+
+#ifndef MSG_ZEROCOPY
+#define MSG_ZEROCOPY    0x4000000
+#endif
+
+#define FILE_SZ (1ULL << 35)
+static int cfg_family = AF_INET6;
+static socklen_t cfg_alen = sizeof(struct sockaddr_in6);
+static int cfg_port = 8787;
+
+static int rcvbuf; /* Default: autotuning.  Can be set with -r <integer> option */
+static int sndbuf; /* Default: autotuning.  Can be set with -w <integer> option */
+static int zflg; /* zero copy option. (MSG_ZEROCOPY for sender, mmap() for receiver */
+static int xflg; /* hash received data (simple xor) (-h option) */
+static int keepflag; /* -k option: receiver shall keep all received file in memory (no munmap() calls) */
+
+static size_t chunk_size  = 512*1024;
+
+static size_t map_align;
+
+unsigned long htotal;
+
+static inline void prefetch(const void *x)
+{
+#if defined(__x86_64__)
+	asm volatile("prefetcht0 %P0" : : "m" (*(const char *)x));
+#endif
+}
+
+void hash_zone(void *zone, unsigned int length)
+{
+	unsigned long temp = htotal;
+
+	while (length >= 8*sizeof(long)) {
+		prefetch(zone + 384);
+		temp ^= *(unsigned long *)zone;
+		temp ^= *(unsigned long *)(zone + sizeof(long));
+		temp ^= *(unsigned long *)(zone + 2*sizeof(long));
+		temp ^= *(unsigned long *)(zone + 3*sizeof(long));
+		temp ^= *(unsigned long *)(zone + 4*sizeof(long));
+		temp ^= *(unsigned long *)(zone + 5*sizeof(long));
+		temp ^= *(unsigned long *)(zone + 6*sizeof(long));
+		temp ^= *(unsigned long *)(zone + 7*sizeof(long));
+		zone += 8*sizeof(long);
+		length -= 8*sizeof(long);
+	}
+	while (length >= 1) {
+		temp ^= *(unsigned char *)zone;
+		zone += 1;
+		length--;
+	}
+	htotal = temp;
+}
+
+#define ALIGN_UP(x, align_to)	(((x) + ((align_to)-1)) & ~((align_to)-1))
+#define ALIGN_PTR_UP(p, ptr_align_to)	((typeof(p))ALIGN_UP((unsigned long)(p), ptr_align_to))
+
+
+static void *mmap_large_buffer(size_t need, size_t *allocated)
+{
+	void *buffer;
+	size_t sz;
+
+	/* Attempt to use huge pages if possible. */
+	sz = ALIGN_UP(need, map_align);
+	buffer = mmap(NULL, sz, PROT_READ | PROT_WRITE,
+		      MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
+
+	if (buffer == (void *)-1) {
+		sz = need;
+		buffer = mmap(NULL, sz, PROT_READ | PROT_WRITE,
+			      MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+		if (buffer != (void *)-1)
+			fprintf(stderr, "MAP_HUGETLB attempt failed, look at /sys/kernel/mm/hugepages for optimal performance\n");
+	}
+	*allocated = sz;
+	return buffer;
+}
+
+void *child_thread(void *arg)
+{
+	unsigned long total_mmap = 0, total = 0;
+	struct tcp_zerocopy_receive zc;
+	unsigned long delta_usec;
+	int flags = MAP_SHARED;
+	struct timeval t0, t1;
+	char *buffer = NULL;
+	void *raddr = NULL;
+	void *addr = NULL;
+	double throughput;
+	struct rusage ru;
+	size_t buffer_sz;
+	int lu, fd;
+
+	fd = (int)(unsigned long)arg;
+
+	gettimeofday(&t0, NULL);
+
+	fcntl(fd, F_SETFL, O_NDELAY);
+	buffer = mmap_large_buffer(chunk_size, &buffer_sz);
+	if (buffer == (void *)-1) {
+		perror("mmap");
+		goto error;
+	}
+	if (zflg) {
+		raddr = mmap(NULL, chunk_size + map_align, PROT_READ, flags, fd, 0);
+		if (raddr == (void *)-1) {
+			perror("mmap");
+			zflg = 0;
+		} else {
+			addr = ALIGN_PTR_UP(raddr, map_align);
+		}
+	}
+	while (1) {
+		struct pollfd pfd = { .fd = fd, .events = POLLIN, };
+		int sub;
+
+		poll(&pfd, 1, 10000);
+		if (zflg) {
+			socklen_t zc_len = sizeof(zc);
+			int res;
+
+			memset(&zc, 0, sizeof(zc));
+			zc.address = (__u64)((unsigned long)addr);
+			zc.length = chunk_size;
+
+			res = getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE,
+					 &zc, &zc_len);
+			if (res == -1)
+				break;
+
+			if (zc.length) {
+				assert(zc.length <= chunk_size);
+				total_mmap += zc.length;
+				if (xflg)
+					hash_zone(addr, zc.length);
+				/* It is more efficient to unmap the pages right now,
+				 * instead of doing this in next TCP_ZEROCOPY_RECEIVE.
+				 */
+				madvise(addr, zc.length, MADV_DONTNEED);
+				total += zc.length;
+			}
+			if (zc.recv_skip_hint) {
+				assert(zc.recv_skip_hint <= chunk_size);
+				lu = read(fd, buffer, zc.recv_skip_hint);
+				if (lu > 0) {
+					if (xflg)
+						hash_zone(buffer, lu);
+					total += lu;
+				}
+			}
+			continue;
+		}
+		sub = 0;
+		while (sub < chunk_size) {
+			lu = read(fd, buffer + sub, chunk_size - sub);
+			if (lu == 0)
+				goto end;
+			if (lu < 0)
+				break;
+			if (xflg)
+				hash_zone(buffer + sub, lu);
+			total += lu;
+			sub += lu;
+		}
+	}
+end:
+	gettimeofday(&t1, NULL);
+	delta_usec = (t1.tv_sec - t0.tv_sec) * 1000000 + t1.tv_usec - t0.tv_usec;
+
+	throughput = 0;
+	if (delta_usec)
+		throughput = total * 8.0 / (double)delta_usec / 1000.0;
+	getrusage(RUSAGE_THREAD, &ru);
+	if (total > 1024*1024) {
+		unsigned long total_usec;
+		unsigned long mb = total >> 20;
+		total_usec = 1000000*ru.ru_utime.tv_sec + ru.ru_utime.tv_usec +
+			     1000000*ru.ru_stime.tv_sec + ru.ru_stime.tv_usec;
+		printf("received %lg MB (%lg %% mmap'ed) in %lg s, %lg Gbit\n"
+		       "  cpu usage user:%lg sys:%lg, %lg usec per MB, %lu c-switches\n",
+				total / (1024.0 * 1024.0),
+				100.0*total_mmap/total,
+				(double)delta_usec / 1000000.0,
+				throughput,
+				(double)ru.ru_utime.tv_sec + (double)ru.ru_utime.tv_usec / 1000000.0,
+				(double)ru.ru_stime.tv_sec + (double)ru.ru_stime.tv_usec / 1000000.0,
+				(double)total_usec/mb,
+				ru.ru_nvcsw);
+	}
+error:
+	munmap(buffer, buffer_sz);
+	close(fd);
+	if (zflg)
+		munmap(raddr, chunk_size + map_align);
+	pthread_exit(0);
+}
+
+static void apply_rcvsnd_buf(int fd)
+{
+	if (rcvbuf && setsockopt(fd, SOL_SOCKET,
+				 SO_RCVBUF, &rcvbuf, sizeof(rcvbuf)) == -1) {
+		perror("setsockopt SO_RCVBUF");
+	}
+
+	if (sndbuf && setsockopt(fd, SOL_SOCKET,
+				 SO_SNDBUF, &sndbuf, sizeof(sndbuf)) == -1) {
+		perror("setsockopt SO_SNDBUF");
+	}
+}
+
+
+static void setup_sockaddr(int domain, const char *str_addr,
+			   struct sockaddr_storage *sockaddr)
+{
+	struct sockaddr_in6 *addr6 = (void *) sockaddr;
+	struct sockaddr_in *addr4 = (void *) sockaddr;
+
+	switch (domain) {
+	case PF_INET:
+		memset(addr4, 0, sizeof(*addr4));
+		addr4->sin_family = AF_INET;
+		addr4->sin_port = htons(cfg_port);
+		if (str_addr &&
+		    inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1)
+			error(1, 0, "ipv4 parse error: %s", str_addr);
+		break;
+	case PF_INET6:
+		memset(addr6, 0, sizeof(*addr6));
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_port = htons(cfg_port);
+		if (str_addr &&
+		    inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1)
+			error(1, 0, "ipv6 parse error: %s", str_addr);
+		break;
+	default:
+		error(1, 0, "illegal domain");
+	}
+}
+
+static void do_accept(int fdlisten)
+{
+	pthread_attr_t attr;
+	int rcvlowat;
+
+	pthread_attr_init(&attr);
+	pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
+
+	rcvlowat = chunk_size;
+	if (setsockopt(fdlisten, SOL_SOCKET, SO_RCVLOWAT,
+		       &rcvlowat, sizeof(rcvlowat)) == -1) {
+		perror("setsockopt SO_RCVLOWAT");
+	}
+
+	apply_rcvsnd_buf(fdlisten);
+
+	while (1) {
+		struct sockaddr_in addr;
+		socklen_t addrlen = sizeof(addr);
+		pthread_t th;
+		int fd, res;
+
+		fd = accept(fdlisten, (struct sockaddr *)&addr, &addrlen);
+		if (fd == -1) {
+			perror("accept");
+			continue;
+		}
+		res = pthread_create(&th, &attr, child_thread,
+				     (void *)(unsigned long)fd);
+		if (res) {
+			errno = res;
+			perror("pthread_create");
+			close(fd);
+		}
+	}
+}
+
+/* Each thread should reserve a big enough vma to avoid
+ * spinlock collisions in ptl locks.
+ * This size is 2MB on x86_64, and is exported in /proc/meminfo.
+ */
+static unsigned long default_huge_page_size(void)
+{
+	FILE *f = fopen("/proc/meminfo", "r");
+	unsigned long hps = 0;
+	size_t linelen = 0;
+	char *line = NULL;
+
+	if (!f)
+		return 0;
+	while (getline(&line, &linelen, f) > 0) {
+		if (sscanf(line, "Hugepagesize:       %lu kB", &hps) == 1) {
+			hps <<= 10;
+			break;
+		}
+	}
+	free(line);
+	fclose(f);
+	return hps;
+}
+
+int main(int argc, char *argv[])
+{
+	struct sockaddr_storage listenaddr, addr;
+	unsigned int max_pacing_rate = 0;
+	uint64_t total = 0;
+	char *host = NULL;
+	int fd, c, on = 1;
+	size_t buffer_sz;
+	char *buffer;
+	int sflg = 0;
+	int mss = 0;
+
+	while ((c = getopt(argc, argv, "46p:svr:w:H:zxkP:M:C:a:")) != -1) {
+		switch (c) {
+		case '4':
+			cfg_family = PF_INET;
+			cfg_alen = sizeof(struct sockaddr_in);
+			break;
+		case '6':
+			cfg_family = PF_INET6;
+			cfg_alen = sizeof(struct sockaddr_in6);
+			break;
+		case 'p':
+			cfg_port = atoi(optarg);
+			break;
+		case 'H':
+			host = optarg;
+			break;
+		case 's': /* server : listen for incoming connections */
+			sflg++;
+			break;
+		case 'r':
+			rcvbuf = atoi(optarg);
+			break;
+		case 'w':
+			sndbuf = atoi(optarg);
+			break;
+		case 'z':
+			zflg = 1;
+			break;
+		case 'M':
+			mss = atoi(optarg);
+			break;
+		case 'x':
+			xflg = 1;
+			break;
+		case 'k':
+			keepflag = 1;
+			break;
+		case 'P':
+			max_pacing_rate = atoi(optarg) ;
+			break;
+		case 'C':
+			chunk_size = atol(optarg);
+			break;
+		case 'a':
+			map_align = atol(optarg);
+			break;
+		default:
+			exit(1);
+		}
+	}
+	if (!map_align) {
+		map_align = default_huge_page_size();
+		/* if really /proc/meminfo is not helping,
+		 * we use the default x86_64 hugepagesize.
+		 */
+		if (!map_align)
+			map_align = 2*1024*1024;
+	}
+	if (sflg) {
+		int fdlisten = socket(cfg_family, SOCK_STREAM, 0);
+
+		if (fdlisten == -1) {
+			perror("socket");
+			exit(1);
+		}
+		apply_rcvsnd_buf(fdlisten);
+		setsockopt(fdlisten, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on));
+
+		setup_sockaddr(cfg_family, host, &listenaddr);
+
+		if (mss &&
+		    setsockopt(fdlisten, IPPROTO_TCP, TCP_MAXSEG,
+			       &mss, sizeof(mss)) == -1) {
+			perror("setsockopt TCP_MAXSEG");
+			exit(1);
+		}
+		if (bind(fdlisten, (const struct sockaddr *)&listenaddr, cfg_alen) == -1) {
+			perror("bind");
+			exit(1);
+		}
+		if (listen(fdlisten, 128) == -1) {
+			perror("listen");
+			exit(1);
+		}
+		do_accept(fdlisten);
+	}
+
+	buffer = mmap_large_buffer(chunk_size, &buffer_sz);
+	if (buffer == (char *)-1) {
+		perror("mmap");
+		exit(1);
+	}
+
+	fd = socket(cfg_family, SOCK_STREAM, 0);
+	if (fd == -1) {
+		perror("socket");
+		exit(1);
+	}
+	apply_rcvsnd_buf(fd);
+
+	setup_sockaddr(cfg_family, host, &addr);
+
+	if (mss &&
+	    setsockopt(fd, IPPROTO_TCP, TCP_MAXSEG, &mss, sizeof(mss)) == -1) {
+		perror("setsockopt TCP_MAXSEG");
+		exit(1);
+	}
+	if (connect(fd, (const struct sockaddr *)&addr, cfg_alen) == -1) {
+		perror("connect");
+		exit(1);
+	}
+	if (max_pacing_rate &&
+	    setsockopt(fd, SOL_SOCKET, SO_MAX_PACING_RATE,
+		       &max_pacing_rate, sizeof(max_pacing_rate)) == -1)
+		perror("setsockopt SO_MAX_PACING_RATE");
+
+	if (zflg && setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY,
+			       &on, sizeof(on)) == -1) {
+		perror("setsockopt SO_ZEROCOPY, (-z option disabled)");
+		zflg = 0;
+	}
+	while (total < FILE_SZ) {
+		int64_t wr = FILE_SZ - total;
+
+		if (wr > chunk_size)
+			wr = chunk_size;
+		/* Note : we just want to fill the pipe with 0 bytes */
+		wr = send(fd, buffer, (size_t)wr, zflg ? MSG_ZEROCOPY : 0);
+		if (wr <= 0)
+			break;
+		total += wr;
+	}
+	close(fd);
+	munmap(buffer, buffer_sz);
+	return 0;
+}
diff --git a/tools/testing/selftests/net/test_blackhole_dev.sh b/tools/testing/selftests/net/test_blackhole_dev.sh
new file mode 100755
index 000000000..3119b80e7
--- /dev/null
+++ b/tools/testing/selftests/net/test_blackhole_dev.sh
@@ -0,0 +1,11 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Runs blackhole-dev test using blackhole-dev kernel module
+
+if /sbin/modprobe -q test_blackhole_dev ; then
+	/sbin/modprobe -q -r test_blackhole_dev;
+	echo "test_blackhole_dev: ok";
+else
+	echo "test_blackhole_dev: [FAIL]";
+	exit 1;
+fi
diff --git a/tools/testing/selftests/net/test_bpf.sh b/tools/testing/selftests/net/test_bpf.sh
new file mode 100755
index 000000000..65677909c
--- /dev/null
+++ b/tools/testing/selftests/net/test_bpf.sh
@@ -0,0 +1,11 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Runs bpf test using test_bpf kernel module
+
+if /sbin/modprobe -q test_bpf ; then
+	/sbin/modprobe -q -r test_bpf;
+	echo "test_bpf: ok";
+else
+	echo "test_bpf: [FAIL]";
+	exit 1;
+fi
diff --git a/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh
new file mode 100755
index 000000000..2d442cdab
--- /dev/null
+++ b/tools/testing/selftests/net/test_vxlan_fdb_changelink.sh
@@ -0,0 +1,29 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Check FDB default-remote handling across "ip link set".
+
+check_remotes()
+{
+	local what=$1; shift
+	local N=$(bridge fdb sh dev vx | grep 00:00:00:00:00:00 | wc -l)
+
+	echo -ne "expected two remotes after $what\t"
+	if [[ $N != 2 ]]; then
+		echo "[FAIL]"
+		EXIT_STATUS=1
+	else
+		echo "[ OK ]"
+	fi
+}
+
+ip link add name vx up type vxlan id 2000 dstport 4789
+bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent
+bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent
+check_remotes "fdb append"
+
+ip link set dev vx type vxlan remote 192.0.2.30
+check_remotes "link set"
+
+ip link del dev vx
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/test_vxlan_under_vrf.sh b/tools/testing/selftests/net/test_vxlan_under_vrf.sh
new file mode 100755
index 000000000..a44b9aca7
--- /dev/null
+++ b/tools/testing/selftests/net/test_vxlan_under_vrf.sh
@@ -0,0 +1,129 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking VXLAN underlay in a non-default VRF.
+#
+# It simulates two hypervisors running a VM each using four network namespaces:
+# two for the HVs, two for the VMs.
+# A small VXLAN tunnel is made between the two hypervisors to have the two vms
+# in the same virtual L2:
+#
+# +-------------------+                                    +-------------------+
+# |                   |                                    |                   |
+# |    vm-1 netns     |                                    |    vm-2 netns     |
+# |                   |                                    |                   |
+# |  +-------------+  |                                    |  +-------------+  |
+# |  |   veth-hv   |  |                                    |  |   veth-hv   |  |
+# |  | 10.0.0.1/24 |  |                                    |  | 10.0.0.2/24 |  |
+# |  +-------------+  |                                    |  +-------------+  |
+# |        .          |                                    |         .         |
+# +-------------------+                                    +-------------------+
+#          .                                                         .
+#          .                                                         .
+#          .                                                         .
+# +-----------------------------------+   +------------------------------------+
+# |        .                          |   |                          .         |
+# |  +----------+                     |   |                     +----------+   |
+# |  | veth-tap |                     |   |                     | veth-tap |   |
+# |  +----+-----+                     |   |                     +----+-----+   |
+# |       |                           |   |                          |         |
+# |    +--+--+      +--------------+  |   |  +--------------+     +--+--+      |
+# |    | br0 |      | vrf-underlay |  |   |  | vrf-underlay |     | br0 |      |
+# |    +--+--+      +-------+------+  |   |  +------+-------+     +--+--+      |
+# |       |                 |         |   |         |                |         |
+# |   +---+----+    +-------+-------+ |   | +-------+-------+    +---+----+    |
+# |   | vxlan0 |....|     veth0     |.|...|.|     veth0     |....| vxlan0 |    |
+# |   +--------+    | 172.16.0.1/24 | |   | | 172.16.0.2/24 |    +--------+    |
+# |                 +---------------+ |   | +---------------+                  |
+# |                                   |   |                                    |
+# |             hv-1 netns            |   |           hv-2 netns               |
+# |                                   |   |                                    |
+# +-----------------------------------+   +------------------------------------+
+#
+# This tests both the connectivity between vm-1 and vm-2, and that the underlay
+# can be moved in and out of the vrf by unsetting and setting veth0's master.
+
+set -e
+
+cleanup() {
+    ip link del veth-hv-1 2>/dev/null || true
+    ip link del veth-tap 2>/dev/null || true
+
+    for ns in hv-1 hv-2 vm-1 vm-2; do
+        ip netns del $ns || true
+    done
+}
+
+# Clean start
+cleanup &> /dev/null
+
+[[ $1 == "clean" ]] && exit 0
+
+trap cleanup EXIT
+
+# Setup "Hypervisors" simulated with netns
+ip link add veth-hv-1 type veth peer name veth-hv-2
+setup-hv-networking() {
+    hv=$1
+
+    ip netns add hv-$hv
+    ip link set veth-hv-$hv netns hv-$hv
+    ip -netns hv-$hv link set veth-hv-$hv name veth0
+
+    ip -netns hv-$hv link add vrf-underlay type vrf table 1
+    ip -netns hv-$hv link set vrf-underlay up
+    ip -netns hv-$hv addr add 172.16.0.$hv/24 dev veth0
+    ip -netns hv-$hv link set veth0 up
+
+    ip -netns hv-$hv link add br0 type bridge
+    ip -netns hv-$hv link set br0 up
+
+    ip -netns hv-$hv link add vxlan0 type vxlan id 10 local 172.16.0.$hv dev veth0 dstport 4789
+    ip -netns hv-$hv link set vxlan0 master br0
+    ip -netns hv-$hv link set vxlan0 up
+}
+setup-hv-networking 1
+setup-hv-networking 2
+
+# Check connectivity between HVs by pinging hv-2 from hv-1
+echo -n "Checking HV connectivity                                           "
+ip netns exec hv-1 ping -c 1 -W 1 172.16.0.2 &> /dev/null || (echo "[FAIL]"; false)
+echo "[ OK ]"
+
+# Setups a "VM" simulated by a netns an a veth pair
+setup-vm() {
+    id=$1
+
+    ip netns add vm-$id
+    ip link add veth-tap type veth peer name veth-hv
+
+    ip link set veth-tap netns hv-$id
+    ip -netns hv-$id link set veth-tap master br0
+    ip -netns hv-$id link set veth-tap up
+
+    ip link set veth-hv netns vm-$id
+    ip -netns vm-$id addr add 10.0.0.$id/24 dev veth-hv
+    ip -netns vm-$id link set veth-hv up
+}
+setup-vm 1
+setup-vm 2
+
+# Setup VTEP routes to make ARP work
+bridge -netns hv-1 fdb add 00:00:00:00:00:00 dev vxlan0 dst 172.16.0.2 self permanent
+bridge -netns hv-2 fdb add 00:00:00:00:00:00 dev vxlan0 dst 172.16.0.1 self permanent
+
+echo -n "Check VM connectivity through VXLAN (underlay in the default VRF)  "
+ip netns exec vm-1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false)
+echo "[ OK ]"
+
+# Move the underlay to a non-default VRF
+ip -netns hv-1 link set veth0 vrf vrf-underlay
+ip -netns hv-1 link set vxlan0 down
+ip -netns hv-1 link set vxlan0 up
+ip -netns hv-2 link set veth0 vrf vrf-underlay
+ip -netns hv-2 link set vxlan0 down
+ip -netns hv-2 link set vxlan0 up
+
+echo -n "Check VM connectivity through VXLAN (underlay in a VRF)            "
+ip netns exec vm-1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false)
+echo "[ OK ]"
diff --git a/tools/testing/selftests/net/timestamping.c b/tools/testing/selftests/net/timestamping.c
new file mode 100644
index 000000000..f4bb4fef0
--- /dev/null
+++ b/tools/testing/selftests/net/timestamping.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This program demonstrates how the various time stamping features in
+ * the Linux kernel work. It emulates the behavior of a PTP
+ * implementation in stand-alone master mode by sending PTPv1 Sync
+ * multicasts once every second. It looks for similar packets, but
+ * beyond that doesn't actually implement PTP.
+ *
+ * Outgoing packets are time stamped with SO_TIMESTAMPING with or
+ * without hardware support.
+ *
+ * Incoming packets are time stamped with SO_TIMESTAMPING with or
+ * without hardware support, SIOCGSTAMP[NS] (per-socket time stamp) and
+ * SO_TIMESTAMP[NS].
+ *
+ * Copyright (C) 2009 Intel Corporation.
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+#include <sys/ioctl.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+
+#include <asm/types.h>
+#include <linux/net_tstamp.h>
+#include <linux/errqueue.h>
+#include <linux/sockios.h>
+
+#ifndef SO_TIMESTAMPING
+# define SO_TIMESTAMPING         37
+# define SCM_TIMESTAMPING        SO_TIMESTAMPING
+#endif
+
+#ifndef SO_TIMESTAMPNS
+# define SO_TIMESTAMPNS 35
+#endif
+
+static void usage(const char *error)
+{
+	if (error)
+		printf("invalid option: %s\n", error);
+	printf("timestamping interface option*\n\n"
+	       "Options:\n"
+	       "  IP_MULTICAST_LOOP - looping outgoing multicasts\n"
+	       "  SO_TIMESTAMP - normal software time stamping, ms resolution\n"
+	       "  SO_TIMESTAMPNS - more accurate software time stamping\n"
+	       "  SOF_TIMESTAMPING_TX_HARDWARE - hardware time stamping of outgoing packets\n"
+	       "  SOF_TIMESTAMPING_TX_SOFTWARE - software fallback for outgoing packets\n"
+	       "  SOF_TIMESTAMPING_RX_HARDWARE - hardware time stamping of incoming packets\n"
+	       "  SOF_TIMESTAMPING_RX_SOFTWARE - software fallback for incoming packets\n"
+	       "  SOF_TIMESTAMPING_SOFTWARE - request reporting of software time stamps\n"
+	       "  SOF_TIMESTAMPING_RAW_HARDWARE - request reporting of raw HW time stamps\n"
+	       "  SIOCGSTAMP - check last socket time stamp\n"
+	       "  SIOCGSTAMPNS - more accurate socket time stamp\n");
+	exit(1);
+}
+
+static void bail(const char *error)
+{
+	printf("%s: %s\n", error, strerror(errno));
+	exit(1);
+}
+
+static const unsigned char sync[] = {
+	0x00, 0x01, 0x00, 0x01,
+	0x5f, 0x44, 0x46, 0x4c,
+	0x54, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x01, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x01, 0x00, 0x37,
+	0x00, 0x00, 0x00, 0x08,
+	0x00, 0x00, 0x00, 0x00,
+	0x49, 0x05, 0xcd, 0x01,
+	0x29, 0xb1, 0x8d, 0xb0,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x00, 0x00, 0x37,
+	0x00, 0x00, 0x00, 0x04,
+	0x44, 0x46, 0x4c, 0x54,
+	0x00, 0x00, 0xf0, 0x60,
+	0x00, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x01,
+	0x00, 0x00, 0xf0, 0x60,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x04,
+	0x44, 0x46, 0x4c, 0x54,
+	0x00, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00
+};
+
+static void sendpacket(int sock, struct sockaddr *addr, socklen_t addr_len)
+{
+	struct timeval now;
+	int res;
+
+	res = sendto(sock, sync, sizeof(sync), 0,
+		addr, addr_len);
+	gettimeofday(&now, 0);
+	if (res < 0)
+		printf("%s: %s\n", "send", strerror(errno));
+	else
+		printf("%ld.%06ld: sent %d bytes\n",
+		       (long)now.tv_sec, (long)now.tv_usec,
+		       res);
+}
+
+static void printpacket(struct msghdr *msg, int res,
+			char *data,
+			int sock, int recvmsg_flags,
+			int siocgstamp, int siocgstampns)
+{
+	struct sockaddr_in *from_addr = (struct sockaddr_in *)msg->msg_name;
+	struct cmsghdr *cmsg;
+	struct timeval tv;
+	struct timespec ts;
+	struct timeval now;
+
+	gettimeofday(&now, 0);
+
+	printf("%ld.%06ld: received %s data, %d bytes from %s, %zu bytes control messages\n",
+	       (long)now.tv_sec, (long)now.tv_usec,
+	       (recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular",
+	       res,
+	       inet_ntoa(from_addr->sin_addr),
+	       msg->msg_controllen);
+	for (cmsg = CMSG_FIRSTHDR(msg);
+	     cmsg;
+	     cmsg = CMSG_NXTHDR(msg, cmsg)) {
+		printf("   cmsg len %zu: ", cmsg->cmsg_len);
+		switch (cmsg->cmsg_level) {
+		case SOL_SOCKET:
+			printf("SOL_SOCKET ");
+			switch (cmsg->cmsg_type) {
+			case SO_TIMESTAMP: {
+				struct timeval *stamp =
+					(struct timeval *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMP %ld.%06ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_usec);
+				break;
+			}
+			case SO_TIMESTAMPNS: {
+				struct timespec *stamp =
+					(struct timespec *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMPNS %ld.%09ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				break;
+			}
+			case SO_TIMESTAMPING: {
+				struct timespec *stamp =
+					(struct timespec *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMPING ");
+				printf("SW %ld.%09ld ",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				stamp++;
+				/* skip deprecated HW transformed */
+				stamp++;
+				printf("HW raw %ld.%09ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				break;
+			}
+			default:
+				printf("type %d", cmsg->cmsg_type);
+				break;
+			}
+			break;
+		case IPPROTO_IP:
+			printf("IPPROTO_IP ");
+			switch (cmsg->cmsg_type) {
+			case IP_RECVERR: {
+				struct sock_extended_err *err =
+					(struct sock_extended_err *)CMSG_DATA(cmsg);
+				printf("IP_RECVERR ee_errno '%s' ee_origin %d => %s",
+					strerror(err->ee_errno),
+					err->ee_origin,
+#ifdef SO_EE_ORIGIN_TIMESTAMPING
+					err->ee_origin == SO_EE_ORIGIN_TIMESTAMPING ?
+					"bounced packet" : "unexpected origin"
+#else
+					"probably SO_EE_ORIGIN_TIMESTAMPING"
+#endif
+					);
+				if (res < sizeof(sync))
+					printf(" => truncated data?!");
+				else if (!memcmp(sync, data + res - sizeof(sync),
+							sizeof(sync)))
+					printf(" => GOT OUR DATA BACK (HURRAY!)");
+				break;
+			}
+			case IP_PKTINFO: {
+				struct in_pktinfo *pktinfo =
+					(struct in_pktinfo *)CMSG_DATA(cmsg);
+				printf("IP_PKTINFO interface index %u",
+					pktinfo->ipi_ifindex);
+				break;
+			}
+			default:
+				printf("type %d", cmsg->cmsg_type);
+				break;
+			}
+			break;
+		default:
+			printf("level %d type %d",
+				cmsg->cmsg_level,
+				cmsg->cmsg_type);
+			break;
+		}
+		printf("\n");
+	}
+
+	if (siocgstamp) {
+		if (ioctl(sock, SIOCGSTAMP, &tv))
+			printf("   %s: %s\n", "SIOCGSTAMP", strerror(errno));
+		else
+			printf("SIOCGSTAMP %ld.%06ld\n",
+			       (long)tv.tv_sec,
+			       (long)tv.tv_usec);
+	}
+	if (siocgstampns) {
+		if (ioctl(sock, SIOCGSTAMPNS, &ts))
+			printf("   %s: %s\n", "SIOCGSTAMPNS", strerror(errno));
+		else
+			printf("SIOCGSTAMPNS %ld.%09ld\n",
+			       (long)ts.tv_sec,
+			       (long)ts.tv_nsec);
+	}
+}
+
+static void recvpacket(int sock, int recvmsg_flags,
+		       int siocgstamp, int siocgstampns)
+{
+	char data[256];
+	struct msghdr msg;
+	struct iovec entry;
+	struct sockaddr_in from_addr;
+	struct {
+		struct cmsghdr cm;
+		char control[512];
+	} control;
+	int res;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.msg_iov = &entry;
+	msg.msg_iovlen = 1;
+	entry.iov_base = data;
+	entry.iov_len = sizeof(data);
+	msg.msg_name = (caddr_t)&from_addr;
+	msg.msg_namelen = sizeof(from_addr);
+	msg.msg_control = &control;
+	msg.msg_controllen = sizeof(control);
+
+	res = recvmsg(sock, &msg, recvmsg_flags|MSG_DONTWAIT);
+	if (res < 0) {
+		printf("%s %s: %s\n",
+		       "recvmsg",
+		       (recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular",
+		       strerror(errno));
+	} else {
+		printpacket(&msg, res, data,
+			    sock, recvmsg_flags,
+			    siocgstamp, siocgstampns);
+	}
+}
+
+int main(int argc, char **argv)
+{
+	int so_timestamping_flags = 0;
+	int so_timestamp = 0;
+	int so_timestampns = 0;
+	int siocgstamp = 0;
+	int siocgstampns = 0;
+	int ip_multicast_loop = 0;
+	char *interface;
+	int i;
+	int enabled = 1;
+	int sock;
+	struct ifreq device;
+	struct ifreq hwtstamp;
+	struct hwtstamp_config hwconfig, hwconfig_requested;
+	struct sockaddr_in addr;
+	struct ip_mreq imr;
+	struct in_addr iaddr;
+	int val;
+	socklen_t len;
+	struct timeval next;
+	size_t if_len;
+
+	if (argc < 2)
+		usage(0);
+	interface = argv[1];
+	if_len = strlen(interface);
+	if (if_len >= IFNAMSIZ) {
+		printf("interface name exceeds IFNAMSIZ\n");
+		exit(1);
+	}
+
+	for (i = 2; i < argc; i++) {
+		if (!strcasecmp(argv[i], "SO_TIMESTAMP"))
+			so_timestamp = 1;
+		else if (!strcasecmp(argv[i], "SO_TIMESTAMPNS"))
+			so_timestampns = 1;
+		else if (!strcasecmp(argv[i], "SIOCGSTAMP"))
+			siocgstamp = 1;
+		else if (!strcasecmp(argv[i], "SIOCGSTAMPNS"))
+			siocgstampns = 1;
+		else if (!strcasecmp(argv[i], "IP_MULTICAST_LOOP"))
+			ip_multicast_loop = 1;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_TX_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_TX_HARDWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_TX_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_TX_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RX_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RX_HARDWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RX_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RX_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RAW_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RAW_HARDWARE;
+		else
+			usage(argv[i]);
+	}
+
+	sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
+	if (sock < 0)
+		bail("socket");
+
+	memset(&device, 0, sizeof(device));
+	memcpy(device.ifr_name, interface, if_len + 1);
+	if (ioctl(sock, SIOCGIFADDR, &device) < 0)
+		bail("getting interface IP address");
+
+	memset(&hwtstamp, 0, sizeof(hwtstamp));
+	memcpy(hwtstamp.ifr_name, interface, if_len + 1);
+	hwtstamp.ifr_data = (void *)&hwconfig;
+	memset(&hwconfig, 0, sizeof(hwconfig));
+	hwconfig.tx_type =
+		(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
+		HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
+	hwconfig.rx_filter =
+		(so_timestamping_flags & SOF_TIMESTAMPING_RX_HARDWARE) ?
+		HWTSTAMP_FILTER_PTP_V1_L4_SYNC : HWTSTAMP_FILTER_NONE;
+	hwconfig_requested = hwconfig;
+	if (ioctl(sock, SIOCSHWTSTAMP, &hwtstamp) < 0) {
+		if ((errno == EINVAL || errno == ENOTSUP) &&
+		    hwconfig_requested.tx_type == HWTSTAMP_TX_OFF &&
+		    hwconfig_requested.rx_filter == HWTSTAMP_FILTER_NONE)
+			printf("SIOCSHWTSTAMP: disabling hardware time stamping not possible\n");
+		else
+			bail("SIOCSHWTSTAMP");
+	}
+	printf("SIOCSHWTSTAMP: tx_type %d requested, got %d; rx_filter %d requested, got %d\n",
+	       hwconfig_requested.tx_type, hwconfig.tx_type,
+	       hwconfig_requested.rx_filter, hwconfig.rx_filter);
+
+	/* bind to PTP port */
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = htons(319 /* PTP event port */);
+	if (bind(sock,
+		 (struct sockaddr *)&addr,
+		 sizeof(struct sockaddr_in)) < 0)
+		bail("bind");
+
+	/* set multicast group for outgoing packets */
+	inet_aton("224.0.1.130", &iaddr); /* alternate PTP domain 1 */
+	addr.sin_addr = iaddr;
+	imr.imr_multiaddr.s_addr = iaddr.s_addr;
+	imr.imr_interface.s_addr =
+		((struct sockaddr_in *)&device.ifr_addr)->sin_addr.s_addr;
+	if (setsockopt(sock, IPPROTO_IP, IP_MULTICAST_IF,
+		       &imr.imr_interface.s_addr, sizeof(struct in_addr)) < 0)
+		bail("set multicast");
+
+	/* join multicast group, loop our own packet */
+	if (setsockopt(sock, IPPROTO_IP, IP_ADD_MEMBERSHIP,
+		       &imr, sizeof(struct ip_mreq)) < 0)
+		bail("join multicast group");
+
+	if (setsockopt(sock, IPPROTO_IP, IP_MULTICAST_LOOP,
+		       &ip_multicast_loop, sizeof(enabled)) < 0) {
+		bail("loop multicast");
+	}
+
+	/* set socket options for time stamping */
+	if (so_timestamp &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMP,
+			   &enabled, sizeof(enabled)) < 0)
+		bail("setsockopt SO_TIMESTAMP");
+
+	if (so_timestampns &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMPNS,
+			   &enabled, sizeof(enabled)) < 0)
+		bail("setsockopt SO_TIMESTAMPNS");
+
+	if (so_timestamping_flags &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMPING,
+			   &so_timestamping_flags,
+			   sizeof(so_timestamping_flags)) < 0)
+		bail("setsockopt SO_TIMESTAMPING");
+
+	/* request IP_PKTINFO for debugging purposes */
+	if (setsockopt(sock, SOL_IP, IP_PKTINFO,
+		       &enabled, sizeof(enabled)) < 0)
+		printf("%s: %s\n", "setsockopt IP_PKTINFO", strerror(errno));
+
+	/* verify socket options */
+	len = sizeof(val);
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMP, &val, &len) < 0)
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMP", strerror(errno));
+	else
+		printf("SO_TIMESTAMP %d\n", val);
+
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMPNS, &val, &len) < 0)
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMPNS",
+		       strerror(errno));
+	else
+		printf("SO_TIMESTAMPNS %d\n", val);
+
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMPING, &val, &len) < 0) {
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMPING",
+		       strerror(errno));
+	} else {
+		printf("SO_TIMESTAMPING %d\n", val);
+		if (val != so_timestamping_flags)
+			printf("   not the expected value %d\n",
+			       so_timestamping_flags);
+	}
+
+	/* send packets forever every five seconds */
+	gettimeofday(&next, 0);
+	next.tv_sec = (next.tv_sec + 1) / 5 * 5;
+	next.tv_usec = 0;
+	while (1) {
+		struct timeval now;
+		struct timeval delta;
+		long delta_us;
+		int res;
+		fd_set readfs, errorfs;
+
+		gettimeofday(&now, 0);
+		delta_us = (long)(next.tv_sec - now.tv_sec) * 1000000 +
+			(long)(next.tv_usec - now.tv_usec);
+		if (delta_us > 0) {
+			/* continue waiting for timeout or data */
+			delta.tv_sec = delta_us / 1000000;
+			delta.tv_usec = delta_us % 1000000;
+
+			FD_ZERO(&readfs);
+			FD_ZERO(&errorfs);
+			FD_SET(sock, &readfs);
+			FD_SET(sock, &errorfs);
+			printf("%ld.%06ld: select %ldus\n",
+			       (long)now.tv_sec, (long)now.tv_usec,
+			       delta_us);
+			res = select(sock + 1, &readfs, 0, &errorfs, &delta);
+			gettimeofday(&now, 0);
+			printf("%ld.%06ld: select returned: %d, %s\n",
+			       (long)now.tv_sec, (long)now.tv_usec,
+			       res,
+			       res < 0 ? strerror(errno) : "success");
+			if (res > 0) {
+				if (FD_ISSET(sock, &readfs))
+					printf("ready for reading\n");
+				if (FD_ISSET(sock, &errorfs))
+					printf("has error\n");
+				recvpacket(sock, 0,
+					   siocgstamp,
+					   siocgstampns);
+				recvpacket(sock, MSG_ERRQUEUE,
+					   siocgstamp,
+					   siocgstampns);
+			}
+		} else {
+			/* write one packet */
+			sendpacket(sock,
+				   (struct sockaddr *)&addr,
+				   sizeof(addr));
+			next.tv_sec += 5;
+			continue;
+		}
+	}
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
new file mode 100644
index 000000000..44a25a9f1
--- /dev/null
+++ b/tools/testing/selftests/net/tls.c
@@ -0,0 +1,1335 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <linux/tls.h>
+#include <linux/tcp.h>
+#include <linux/socket.h>
+
+#include <sys/types.h>
+#include <sys/sendfile.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+
+#include "../kselftest_harness.h"
+
+#define TLS_PAYLOAD_MAX_LEN 16384
+#define SOL_TLS 282
+
+FIXTURE(tls_basic)
+{
+	int fd, cfd;
+	bool notls;
+};
+
+FIXTURE_SETUP(tls_basic)
+{
+	struct sockaddr_in addr;
+	socklen_t len;
+	int sfd, ret;
+
+	self->notls = false;
+	len = sizeof(addr);
+
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = 0;
+
+	self->fd = socket(AF_INET, SOCK_STREAM, 0);
+	sfd = socket(AF_INET, SOCK_STREAM, 0);
+
+	ret = bind(sfd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+	ret = listen(sfd, 10);
+	ASSERT_EQ(ret, 0);
+
+	ret = getsockname(sfd, &addr, &len);
+	ASSERT_EQ(ret, 0);
+
+	ret = connect(self->fd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+
+	self->cfd = accept(sfd, &addr, &len);
+	ASSERT_GE(self->cfd, 0);
+
+	close(sfd);
+
+	ret = setsockopt(self->fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	if (ret != 0) {
+		ASSERT_EQ(errno, ENOENT);
+		self->notls = true;
+		printf("Failure setting TCP_ULP, testing without tls\n");
+		return;
+	}
+
+	ret = setsockopt(self->cfd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	ASSERT_EQ(ret, 0);
+}
+
+FIXTURE_TEARDOWN(tls_basic)
+{
+	close(self->fd);
+	close(self->cfd);
+}
+
+/* Send some data through with ULP but no keys */
+TEST_F(tls_basic, base_base)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+	char buf[10];
+
+	ASSERT_EQ(strlen(test_str) + 1, send_len);
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+};
+
+FIXTURE(tls)
+{
+	int fd, cfd;
+	bool notls;
+};
+
+FIXTURE_VARIANT(tls)
+{
+	unsigned int tls_version;
+};
+
+FIXTURE_VARIANT_ADD(tls, 12)
+{
+	.tls_version = TLS_1_2_VERSION,
+};
+
+FIXTURE_VARIANT_ADD(tls, 13)
+{
+	.tls_version = TLS_1_3_VERSION,
+};
+
+FIXTURE_SETUP(tls)
+{
+	struct tls12_crypto_info_aes_gcm_128 tls12;
+	struct sockaddr_in addr;
+	socklen_t len;
+	int sfd, ret;
+
+	self->notls = false;
+	len = sizeof(addr);
+
+	memset(&tls12, 0, sizeof(tls12));
+	tls12.info.version = variant->tls_version;
+	tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
+
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = 0;
+
+	self->fd = socket(AF_INET, SOCK_STREAM, 0);
+	sfd = socket(AF_INET, SOCK_STREAM, 0);
+
+	ret = bind(sfd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+	ret = listen(sfd, 10);
+	ASSERT_EQ(ret, 0);
+
+	ret = getsockname(sfd, &addr, &len);
+	ASSERT_EQ(ret, 0);
+
+	ret = connect(self->fd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+
+	ret = setsockopt(self->fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	if (ret != 0) {
+		self->notls = true;
+		printf("Failure setting TCP_ULP, testing without tls\n");
+	}
+
+	if (!self->notls) {
+		ret = setsockopt(self->fd, SOL_TLS, TLS_TX, &tls12,
+				 sizeof(tls12));
+		ASSERT_EQ(ret, 0);
+	}
+
+	self->cfd = accept(sfd, &addr, &len);
+	ASSERT_GE(self->cfd, 0);
+
+	if (!self->notls) {
+		ret = setsockopt(self->cfd, IPPROTO_TCP, TCP_ULP, "tls",
+				 sizeof("tls"));
+		ASSERT_EQ(ret, 0);
+
+		ret = setsockopt(self->cfd, SOL_TLS, TLS_RX, &tls12,
+				 sizeof(tls12));
+		ASSERT_EQ(ret, 0);
+	}
+
+	close(sfd);
+}
+
+FIXTURE_TEARDOWN(tls)
+{
+	close(self->fd);
+	close(self->cfd);
+}
+
+TEST_F(tls, sendfile)
+{
+	int filefd = open("/proc/self/exe", O_RDONLY);
+	struct stat st;
+
+	EXPECT_GE(filefd, 0);
+	fstat(filefd, &st);
+	EXPECT_GE(sendfile(self->fd, filefd, 0, st.st_size), 0);
+}
+
+TEST_F(tls, send_then_sendfile)
+{
+	int filefd = open("/proc/self/exe", O_RDONLY);
+	char const *test_str = "test_send";
+	int to_send = strlen(test_str) + 1;
+	char recv_buf[10];
+	struct stat st;
+	char *buf;
+
+	EXPECT_GE(filefd, 0);
+	fstat(filefd, &st);
+	buf = (char *)malloc(st.st_size);
+
+	EXPECT_EQ(send(self->fd, test_str, to_send, 0), to_send);
+	EXPECT_EQ(recv(self->cfd, recv_buf, to_send, MSG_WAITALL), to_send);
+	EXPECT_EQ(memcmp(test_str, recv_buf, to_send), 0);
+
+	EXPECT_GE(sendfile(self->fd, filefd, 0, st.st_size), 0);
+	EXPECT_EQ(recv(self->cfd, buf, st.st_size, MSG_WAITALL), st.st_size);
+}
+
+static void chunked_sendfile(struct __test_metadata *_metadata,
+			     struct _test_data_tls *self,
+			     uint16_t chunk_size,
+			     uint16_t extra_payload_size)
+{
+	char buf[TLS_PAYLOAD_MAX_LEN];
+	uint16_t test_payload_size;
+	int size = 0;
+	int ret;
+	char filename[] = "/tmp/mytemp.XXXXXX";
+	int fd = mkstemp(filename);
+	off_t offset = 0;
+
+	unlink(filename);
+	ASSERT_GE(fd, 0);
+	EXPECT_GE(chunk_size, 1);
+	test_payload_size = chunk_size + extra_payload_size;
+	ASSERT_GE(TLS_PAYLOAD_MAX_LEN, test_payload_size);
+	memset(buf, 1, test_payload_size);
+	size = write(fd, buf, test_payload_size);
+	EXPECT_EQ(size, test_payload_size);
+	fsync(fd);
+
+	while (size > 0) {
+		ret = sendfile(self->fd, fd, &offset, chunk_size);
+		EXPECT_GE(ret, 0);
+		size -= ret;
+	}
+
+	EXPECT_EQ(recv(self->cfd, buf, test_payload_size, MSG_WAITALL),
+		  test_payload_size);
+
+	close(fd);
+}
+
+TEST_F(tls, multi_chunk_sendfile)
+{
+	chunked_sendfile(_metadata, self, 4096, 4096);
+	chunked_sendfile(_metadata, self, 4096, 0);
+	chunked_sendfile(_metadata, self, 4096, 1);
+	chunked_sendfile(_metadata, self, 4096, 2048);
+	chunked_sendfile(_metadata, self, 8192, 2048);
+	chunked_sendfile(_metadata, self, 4096, 8192);
+	chunked_sendfile(_metadata, self, 8192, 4096);
+	chunked_sendfile(_metadata, self, 12288, 1024);
+	chunked_sendfile(_metadata, self, 12288, 2000);
+	chunked_sendfile(_metadata, self, 15360, 100);
+	chunked_sendfile(_metadata, self, 15360, 300);
+	chunked_sendfile(_metadata, self, 1, 4096);
+	chunked_sendfile(_metadata, self, 2048, 4096);
+	chunked_sendfile(_metadata, self, 2048, 8192);
+	chunked_sendfile(_metadata, self, 4096, 8192);
+	chunked_sendfile(_metadata, self, 1024, 12288);
+	chunked_sendfile(_metadata, self, 2000, 12288);
+	chunked_sendfile(_metadata, self, 100, 15360);
+	chunked_sendfile(_metadata, self, 300, 15360);
+}
+
+TEST_F(tls, recv_max)
+{
+	unsigned int send_len = TLS_PAYLOAD_MAX_LEN;
+	char recv_mem[TLS_PAYLOAD_MAX_LEN];
+	char buf[TLS_PAYLOAD_MAX_LEN];
+
+	EXPECT_GE(send(self->fd, buf, send_len, 0), 0);
+	EXPECT_NE(recv(self->cfd, recv_mem, send_len, 0), -1);
+	EXPECT_EQ(memcmp(buf, recv_mem, send_len), 0);
+}
+
+TEST_F(tls, recv_small)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+	char buf[10];
+
+	send_len = strlen(test_str) + 1;
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+}
+
+TEST_F(tls, msg_more)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+	char buf[10 * 2];
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, MSG_MORE), send_len);
+	EXPECT_EQ(recv(self->cfd, buf, send_len, MSG_DONTWAIT), -1);
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_EQ(recv(self->cfd, buf, send_len * 2, MSG_WAITALL),
+		  send_len * 2);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+}
+
+TEST_F(tls, msg_more_unsent)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+	char buf[10];
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, MSG_MORE), send_len);
+	EXPECT_EQ(recv(self->cfd, buf, send_len, MSG_DONTWAIT), -1);
+}
+
+TEST_F(tls, sendmsg_single)
+{
+	struct msghdr msg;
+
+	char const *test_str = "test_sendmsg";
+	size_t send_len = 13;
+	struct iovec vec;
+	char buf[13];
+
+	vec.iov_base = (char *)test_str;
+	vec.iov_len = send_len;
+	memset(&msg, 0, sizeof(struct msghdr));
+	msg.msg_iov = &vec;
+	msg.msg_iovlen = 1;
+	EXPECT_EQ(sendmsg(self->fd, &msg, 0), send_len);
+	EXPECT_EQ(recv(self->cfd, buf, send_len, MSG_WAITALL), send_len);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+}
+
+#define MAX_FRAGS	64
+#define SEND_LEN	13
+TEST_F(tls, sendmsg_fragmented)
+{
+	char const *test_str = "test_sendmsg";
+	char buf[SEND_LEN * MAX_FRAGS];
+	struct iovec vec[MAX_FRAGS];
+	struct msghdr msg;
+	int i, frags;
+
+	for (frags = 1; frags <= MAX_FRAGS; frags++) {
+		for (i = 0; i < frags; i++) {
+			vec[i].iov_base = (char *)test_str;
+			vec[i].iov_len = SEND_LEN;
+		}
+
+		memset(&msg, 0, sizeof(struct msghdr));
+		msg.msg_iov = vec;
+		msg.msg_iovlen = frags;
+
+		EXPECT_EQ(sendmsg(self->fd, &msg, 0), SEND_LEN * frags);
+		EXPECT_EQ(recv(self->cfd, buf, SEND_LEN * frags, MSG_WAITALL),
+			  SEND_LEN * frags);
+
+		for (i = 0; i < frags; i++)
+			EXPECT_EQ(memcmp(buf + SEND_LEN * i,
+					 test_str, SEND_LEN), 0);
+	}
+}
+#undef MAX_FRAGS
+#undef SEND_LEN
+
+TEST_F(tls, sendmsg_large)
+{
+	void *mem = malloc(16384);
+	size_t send_len = 16384;
+	size_t sends = 128;
+	struct msghdr msg;
+	size_t recvs = 0;
+	size_t sent = 0;
+
+	memset(&msg, 0, sizeof(struct msghdr));
+	while (sent++ < sends) {
+		struct iovec vec = { (void *)mem, send_len };
+
+		msg.msg_iov = &vec;
+		msg.msg_iovlen = 1;
+		EXPECT_EQ(sendmsg(self->fd, &msg, 0), send_len);
+	}
+
+	while (recvs++ < sends) {
+		EXPECT_NE(recv(self->cfd, mem, send_len, 0), -1);
+	}
+
+	free(mem);
+}
+
+TEST_F(tls, sendmsg_multiple)
+{
+	char const *test_str = "test_sendmsg_multiple";
+	struct iovec vec[5];
+	char *test_strs[5];
+	struct msghdr msg;
+	int total_len = 0;
+	int len_cmp = 0;
+	int iov_len = 5;
+	char *buf;
+	int i;
+
+	memset(&msg, 0, sizeof(struct msghdr));
+	for (i = 0; i < iov_len; i++) {
+		test_strs[i] = (char *)malloc(strlen(test_str) + 1);
+		snprintf(test_strs[i], strlen(test_str) + 1, "%s", test_str);
+		vec[i].iov_base = (void *)test_strs[i];
+		vec[i].iov_len = strlen(test_strs[i]) + 1;
+		total_len += vec[i].iov_len;
+	}
+	msg.msg_iov = vec;
+	msg.msg_iovlen = iov_len;
+
+	EXPECT_EQ(sendmsg(self->fd, &msg, 0), total_len);
+	buf = malloc(total_len);
+	EXPECT_NE(recv(self->cfd, buf, total_len, 0), -1);
+	for (i = 0; i < iov_len; i++) {
+		EXPECT_EQ(memcmp(test_strs[i], buf + len_cmp,
+				 strlen(test_strs[i])),
+			  0);
+		len_cmp += strlen(buf + len_cmp) + 1;
+	}
+	for (i = 0; i < iov_len; i++)
+		free(test_strs[i]);
+	free(buf);
+}
+
+TEST_F(tls, sendmsg_multiple_stress)
+{
+	char const *test_str = "abcdefghijklmno";
+	struct iovec vec[1024];
+	char *test_strs[1024];
+	int iov_len = 1024;
+	int total_len = 0;
+	char buf[1 << 14];
+	struct msghdr msg;
+	int len_cmp = 0;
+	int i;
+
+	memset(&msg, 0, sizeof(struct msghdr));
+	for (i = 0; i < iov_len; i++) {
+		test_strs[i] = (char *)malloc(strlen(test_str) + 1);
+		snprintf(test_strs[i], strlen(test_str) + 1, "%s", test_str);
+		vec[i].iov_base = (void *)test_strs[i];
+		vec[i].iov_len = strlen(test_strs[i]) + 1;
+		total_len += vec[i].iov_len;
+	}
+	msg.msg_iov = vec;
+	msg.msg_iovlen = iov_len;
+
+	EXPECT_EQ(sendmsg(self->fd, &msg, 0), total_len);
+	EXPECT_NE(recv(self->cfd, buf, total_len, 0), -1);
+
+	for (i = 0; i < iov_len; i++)
+		len_cmp += strlen(buf + len_cmp) + 1;
+
+	for (i = 0; i < iov_len; i++)
+		free(test_strs[i]);
+}
+
+TEST_F(tls, splice_from_pipe)
+{
+	int send_len = TLS_PAYLOAD_MAX_LEN;
+	char mem_send[TLS_PAYLOAD_MAX_LEN];
+	char mem_recv[TLS_PAYLOAD_MAX_LEN];
+	int p[2];
+
+	ASSERT_GE(pipe(p), 0);
+	EXPECT_GE(write(p[1], mem_send, send_len), 0);
+	EXPECT_GE(splice(p[0], NULL, self->fd, NULL, send_len, 0), 0);
+	EXPECT_EQ(recv(self->cfd, mem_recv, send_len, MSG_WAITALL), send_len);
+	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
+}
+
+TEST_F(tls, splice_from_pipe2)
+{
+	int send_len = 16000;
+	char mem_send[16000];
+	char mem_recv[16000];
+	int p2[2];
+	int p[2];
+
+	ASSERT_GE(pipe(p), 0);
+	ASSERT_GE(pipe(p2), 0);
+	EXPECT_GE(write(p[1], mem_send, 8000), 0);
+	EXPECT_GE(splice(p[0], NULL, self->fd, NULL, 8000, 0), 0);
+	EXPECT_GE(write(p2[1], mem_send + 8000, 8000), 0);
+	EXPECT_GE(splice(p2[0], NULL, self->fd, NULL, 8000, 0), 0);
+	EXPECT_EQ(recv(self->cfd, mem_recv, send_len, MSG_WAITALL), send_len);
+	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
+}
+
+TEST_F(tls, send_and_splice)
+{
+	int send_len = TLS_PAYLOAD_MAX_LEN;
+	char mem_send[TLS_PAYLOAD_MAX_LEN];
+	char mem_recv[TLS_PAYLOAD_MAX_LEN];
+	char const *test_str = "test_read";
+	int send_len2 = 10;
+	char buf[10];
+	int p[2];
+
+	ASSERT_GE(pipe(p), 0);
+	EXPECT_EQ(send(self->fd, test_str, send_len2, 0), send_len2);
+	EXPECT_EQ(recv(self->cfd, buf, send_len2, MSG_WAITALL), send_len2);
+	EXPECT_EQ(memcmp(test_str, buf, send_len2), 0);
+
+	EXPECT_GE(write(p[1], mem_send, send_len), send_len);
+	EXPECT_GE(splice(p[0], NULL, self->fd, NULL, send_len, 0), send_len);
+
+	EXPECT_EQ(recv(self->cfd, mem_recv, send_len, MSG_WAITALL), send_len);
+	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
+}
+
+TEST_F(tls, splice_to_pipe)
+{
+	int send_len = TLS_PAYLOAD_MAX_LEN;
+	char mem_send[TLS_PAYLOAD_MAX_LEN];
+	char mem_recv[TLS_PAYLOAD_MAX_LEN];
+	int p[2];
+
+	ASSERT_GE(pipe(p), 0);
+	EXPECT_GE(send(self->fd, mem_send, send_len, 0), 0);
+	EXPECT_GE(splice(self->cfd, NULL, p[1], NULL, send_len, 0), 0);
+	EXPECT_GE(read(p[0], mem_recv, send_len), 0);
+	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
+}
+
+TEST_F(tls, recvmsg_single)
+{
+	char const *test_str = "test_recvmsg_single";
+	int send_len = strlen(test_str) + 1;
+	char buf[20];
+	struct msghdr hdr;
+	struct iovec vec;
+
+	memset(&hdr, 0, sizeof(hdr));
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	vec.iov_base = (char *)buf;
+	vec.iov_len = send_len;
+	hdr.msg_iovlen = 1;
+	hdr.msg_iov = &vec;
+	EXPECT_NE(recvmsg(self->cfd, &hdr, 0), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+}
+
+TEST_F(tls, recvmsg_single_max)
+{
+	int send_len = TLS_PAYLOAD_MAX_LEN;
+	char send_mem[TLS_PAYLOAD_MAX_LEN];
+	char recv_mem[TLS_PAYLOAD_MAX_LEN];
+	struct iovec vec;
+	struct msghdr hdr;
+
+	EXPECT_EQ(send(self->fd, send_mem, send_len, 0), send_len);
+	vec.iov_base = (char *)recv_mem;
+	vec.iov_len = TLS_PAYLOAD_MAX_LEN;
+
+	hdr.msg_iovlen = 1;
+	hdr.msg_iov = &vec;
+	EXPECT_NE(recvmsg(self->cfd, &hdr, 0), -1);
+	EXPECT_EQ(memcmp(send_mem, recv_mem, send_len), 0);
+}
+
+TEST_F(tls, recvmsg_multiple)
+{
+	unsigned int msg_iovlen = 1024;
+	unsigned int len_compared = 0;
+	struct iovec vec[1024];
+	char *iov_base[1024];
+	unsigned int iov_len = 16;
+	int send_len = 1 << 14;
+	char buf[1 << 14];
+	struct msghdr hdr;
+	int i;
+
+	EXPECT_EQ(send(self->fd, buf, send_len, 0), send_len);
+	for (i = 0; i < msg_iovlen; i++) {
+		iov_base[i] = (char *)malloc(iov_len);
+		vec[i].iov_base = iov_base[i];
+		vec[i].iov_len = iov_len;
+	}
+
+	hdr.msg_iovlen = msg_iovlen;
+	hdr.msg_iov = vec;
+	EXPECT_NE(recvmsg(self->cfd, &hdr, 0), -1);
+	for (i = 0; i < msg_iovlen; i++)
+		len_compared += iov_len;
+
+	for (i = 0; i < msg_iovlen; i++)
+		free(iov_base[i]);
+}
+
+TEST_F(tls, single_send_multiple_recv)
+{
+	unsigned int total_len = TLS_PAYLOAD_MAX_LEN * 2;
+	unsigned int send_len = TLS_PAYLOAD_MAX_LEN;
+	char send_mem[TLS_PAYLOAD_MAX_LEN * 2];
+	char recv_mem[TLS_PAYLOAD_MAX_LEN * 2];
+
+	EXPECT_GE(send(self->fd, send_mem, total_len, 0), 0);
+	memset(recv_mem, 0, total_len);
+
+	EXPECT_NE(recv(self->cfd, recv_mem, send_len, 0), -1);
+	EXPECT_NE(recv(self->cfd, recv_mem + send_len, send_len, 0), -1);
+	EXPECT_EQ(memcmp(send_mem, recv_mem, total_len), 0);
+}
+
+TEST_F(tls, multiple_send_single_recv)
+{
+	unsigned int total_len = 2 * 10;
+	unsigned int send_len = 10;
+	char recv_mem[2 * 10];
+	char send_mem[10];
+
+	EXPECT_GE(send(self->fd, send_mem, send_len, 0), 0);
+	EXPECT_GE(send(self->fd, send_mem, send_len, 0), 0);
+	memset(recv_mem, 0, total_len);
+	EXPECT_EQ(recv(self->cfd, recv_mem, total_len, MSG_WAITALL), total_len);
+
+	EXPECT_EQ(memcmp(send_mem, recv_mem, send_len), 0);
+	EXPECT_EQ(memcmp(send_mem, recv_mem + send_len, send_len), 0);
+}
+
+TEST_F(tls, single_send_multiple_recv_non_align)
+{
+	const unsigned int total_len = 15;
+	const unsigned int recv_len = 10;
+	char recv_mem[recv_len * 2];
+	char send_mem[total_len];
+
+	EXPECT_GE(send(self->fd, send_mem, total_len, 0), 0);
+	memset(recv_mem, 0, total_len);
+
+	EXPECT_EQ(recv(self->cfd, recv_mem, recv_len, 0), recv_len);
+	EXPECT_EQ(recv(self->cfd, recv_mem + recv_len, recv_len, 0), 5);
+	EXPECT_EQ(memcmp(send_mem, recv_mem, total_len), 0);
+}
+
+TEST_F(tls, recv_partial)
+{
+	char const *test_str = "test_read_partial";
+	char const *test_str_first = "test_read";
+	char const *test_str_second = "_partial";
+	int send_len = strlen(test_str) + 1;
+	char recv_mem[18];
+
+	memset(recv_mem, 0, sizeof(recv_mem));
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, recv_mem, strlen(test_str_first),
+		       MSG_WAITALL), -1);
+	EXPECT_EQ(memcmp(test_str_first, recv_mem, strlen(test_str_first)), 0);
+	memset(recv_mem, 0, sizeof(recv_mem));
+	EXPECT_NE(recv(self->cfd, recv_mem, strlen(test_str_second),
+		       MSG_WAITALL), -1);
+	EXPECT_EQ(memcmp(test_str_second, recv_mem, strlen(test_str_second)),
+		  0);
+}
+
+TEST_F(tls, recv_nonblock)
+{
+	char buf[4096];
+	bool err;
+
+	EXPECT_EQ(recv(self->cfd, buf, sizeof(buf), MSG_DONTWAIT), -1);
+	err = (errno == EAGAIN || errno == EWOULDBLOCK);
+	EXPECT_EQ(err, true);
+}
+
+TEST_F(tls, recv_peek)
+{
+	char const *test_str = "test_read_peek";
+	int send_len = strlen(test_str) + 1;
+	char buf[15];
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, buf, send_len, MSG_PEEK), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+	memset(buf, 0, sizeof(buf));
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+}
+
+TEST_F(tls, recv_peek_multiple)
+{
+	char const *test_str = "test_read_peek";
+	int send_len = strlen(test_str) + 1;
+	unsigned int num_peeks = 100;
+	char buf[15];
+	int i;
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	for (i = 0; i < num_peeks; i++) {
+		EXPECT_NE(recv(self->cfd, buf, send_len, MSG_PEEK), -1);
+		EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+		memset(buf, 0, sizeof(buf));
+	}
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+}
+
+TEST_F(tls, recv_peek_multiple_records)
+{
+	char const *test_str = "test_read_peek_mult_recs";
+	char const *test_str_first = "test_read_peek";
+	char const *test_str_second = "_mult_recs";
+	int len;
+	char buf[64];
+
+	len = strlen(test_str_first);
+	EXPECT_EQ(send(self->fd, test_str_first, len, 0), len);
+
+	len = strlen(test_str_second) + 1;
+	EXPECT_EQ(send(self->fd, test_str_second, len, 0), len);
+
+	len = strlen(test_str_first);
+	memset(buf, 0, len);
+	EXPECT_EQ(recv(self->cfd, buf, len, MSG_PEEK | MSG_WAITALL), len);
+
+	/* MSG_PEEK can only peek into the current record. */
+	len = strlen(test_str_first);
+	EXPECT_EQ(memcmp(test_str_first, buf, len), 0);
+
+	len = strlen(test_str) + 1;
+	memset(buf, 0, len);
+	EXPECT_EQ(recv(self->cfd, buf, len, MSG_WAITALL), len);
+
+	/* Non-MSG_PEEK will advance strparser (and therefore record)
+	 * however.
+	 */
+	len = strlen(test_str) + 1;
+	EXPECT_EQ(memcmp(test_str, buf, len), 0);
+
+	/* MSG_MORE will hold current record open, so later MSG_PEEK
+	 * will see everything.
+	 */
+	len = strlen(test_str_first);
+	EXPECT_EQ(send(self->fd, test_str_first, len, MSG_MORE), len);
+
+	len = strlen(test_str_second) + 1;
+	EXPECT_EQ(send(self->fd, test_str_second, len, 0), len);
+
+	len = strlen(test_str) + 1;
+	memset(buf, 0, len);
+	EXPECT_EQ(recv(self->cfd, buf, len, MSG_PEEK | MSG_WAITALL), len);
+
+	len = strlen(test_str) + 1;
+	EXPECT_EQ(memcmp(test_str, buf, len), 0);
+}
+
+TEST_F(tls, recv_peek_large_buf_mult_recs)
+{
+	char const *test_str = "test_read_peek_mult_recs";
+	char const *test_str_first = "test_read_peek";
+	char const *test_str_second = "_mult_recs";
+	int len;
+	char buf[64];
+
+	len = strlen(test_str_first);
+	EXPECT_EQ(send(self->fd, test_str_first, len, 0), len);
+
+	len = strlen(test_str_second) + 1;
+	EXPECT_EQ(send(self->fd, test_str_second, len, 0), len);
+
+	len = strlen(test_str) + 1;
+	memset(buf, 0, len);
+	EXPECT_NE((len = recv(self->cfd, buf, len,
+			      MSG_PEEK | MSG_WAITALL)), -1);
+	len = strlen(test_str) + 1;
+	EXPECT_EQ(memcmp(test_str, buf, len), 0);
+}
+
+TEST_F(tls, recv_lowat)
+{
+	char send_mem[10] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 };
+	char recv_mem[20];
+	int lowat = 8;
+
+	EXPECT_EQ(send(self->fd, send_mem, 10, 0), 10);
+	EXPECT_EQ(send(self->fd, send_mem, 5, 0), 5);
+
+	memset(recv_mem, 0, 20);
+	EXPECT_EQ(setsockopt(self->cfd, SOL_SOCKET, SO_RCVLOWAT,
+			     &lowat, sizeof(lowat)), 0);
+	EXPECT_EQ(recv(self->cfd, recv_mem, 1, MSG_WAITALL), 1);
+	EXPECT_EQ(recv(self->cfd, recv_mem + 1, 6, MSG_WAITALL), 6);
+	EXPECT_EQ(recv(self->cfd, recv_mem + 7, 10, 0), 8);
+
+	EXPECT_EQ(memcmp(send_mem, recv_mem, 10), 0);
+	EXPECT_EQ(memcmp(send_mem, recv_mem + 10, 5), 0);
+}
+
+TEST_F(tls, bidir)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+	char buf[10];
+	int ret;
+
+	if (!self->notls) {
+		struct tls12_crypto_info_aes_gcm_128 tls12;
+
+		memset(&tls12, 0, sizeof(tls12));
+		tls12.info.version = variant->tls_version;
+		tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
+
+		ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12,
+				 sizeof(tls12));
+		ASSERT_EQ(ret, 0);
+
+		ret = setsockopt(self->cfd, SOL_TLS, TLS_TX, &tls12,
+				 sizeof(tls12));
+		ASSERT_EQ(ret, 0);
+	}
+
+	ASSERT_EQ(strlen(test_str) + 1, send_len);
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+
+	memset(buf, 0, sizeof(buf));
+
+	EXPECT_EQ(send(self->cfd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->fd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+};
+
+TEST_F(tls, pollin)
+{
+	char const *test_str = "test_poll";
+	struct pollfd fd = { 0, 0, 0 };
+	char buf[10];
+	int send_len = 10;
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	fd.fd = self->cfd;
+	fd.events = POLLIN;
+
+	EXPECT_EQ(poll(&fd, 1, 20), 1);
+	EXPECT_EQ(fd.revents & POLLIN, 1);
+	EXPECT_EQ(recv(self->cfd, buf, send_len, MSG_WAITALL), send_len);
+	/* Test timing out */
+	EXPECT_EQ(poll(&fd, 1, 20), 0);
+}
+
+TEST_F(tls, poll_wait)
+{
+	char const *test_str = "test_poll_wait";
+	int send_len = strlen(test_str) + 1;
+	struct pollfd fd = { 0, 0, 0 };
+	char recv_mem[15];
+
+	fd.fd = self->cfd;
+	fd.events = POLLIN;
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	/* Set timeout to inf. secs */
+	EXPECT_EQ(poll(&fd, 1, -1), 1);
+	EXPECT_EQ(fd.revents & POLLIN, 1);
+	EXPECT_EQ(recv(self->cfd, recv_mem, send_len, MSG_WAITALL), send_len);
+}
+
+TEST_F(tls, poll_wait_split)
+{
+	struct pollfd fd = { 0, 0, 0 };
+	char send_mem[20] = {};
+	char recv_mem[15];
+
+	fd.fd = self->cfd;
+	fd.events = POLLIN;
+	/* Send 20 bytes */
+	EXPECT_EQ(send(self->fd, send_mem, sizeof(send_mem), 0),
+		  sizeof(send_mem));
+	/* Poll with inf. timeout */
+	EXPECT_EQ(poll(&fd, 1, -1), 1);
+	EXPECT_EQ(fd.revents & POLLIN, 1);
+	EXPECT_EQ(recv(self->cfd, recv_mem, sizeof(recv_mem), MSG_WAITALL),
+		  sizeof(recv_mem));
+
+	/* Now the remaining 5 bytes of record data are in TLS ULP */
+	fd.fd = self->cfd;
+	fd.events = POLLIN;
+	EXPECT_EQ(poll(&fd, 1, -1), 1);
+	EXPECT_EQ(fd.revents & POLLIN, 1);
+	EXPECT_EQ(recv(self->cfd, recv_mem, sizeof(recv_mem), 0),
+		  sizeof(send_mem) - sizeof(recv_mem));
+}
+
+TEST_F(tls, blocking)
+{
+	size_t data = 100000;
+	int res = fork();
+
+	EXPECT_NE(res, -1);
+
+	if (res) {
+		/* parent */
+		size_t left = data;
+		char buf[16384];
+		int status;
+		int pid2;
+
+		while (left) {
+			int res = send(self->fd, buf,
+				       left > 16384 ? 16384 : left, 0);
+
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+
+		pid2 = wait(&status);
+		EXPECT_EQ(status, 0);
+		EXPECT_EQ(res, pid2);
+	} else {
+		/* child */
+		size_t left = data;
+		char buf[16384];
+
+		while (left) {
+			int res = recv(self->cfd, buf,
+				       left > 16384 ? 16384 : left, 0);
+
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+	}
+}
+
+TEST_F(tls, nonblocking)
+{
+	size_t data = 100000;
+	int sendbuf = 100;
+	int flags;
+	int res;
+
+	flags = fcntl(self->fd, F_GETFL, 0);
+	fcntl(self->fd, F_SETFL, flags | O_NONBLOCK);
+	fcntl(self->cfd, F_SETFL, flags | O_NONBLOCK);
+
+	/* Ensure nonblocking behavior by imposing a small send
+	 * buffer.
+	 */
+	EXPECT_EQ(setsockopt(self->fd, SOL_SOCKET, SO_SNDBUF,
+			     &sendbuf, sizeof(sendbuf)), 0);
+
+	res = fork();
+	EXPECT_NE(res, -1);
+
+	if (res) {
+		/* parent */
+		bool eagain = false;
+		size_t left = data;
+		char buf[16384];
+		int status;
+		int pid2;
+
+		while (left) {
+			int res = send(self->fd, buf,
+				       left > 16384 ? 16384 : left, 0);
+
+			if (res == -1 && errno == EAGAIN) {
+				eagain = true;
+				usleep(10000);
+				continue;
+			}
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+
+		EXPECT_TRUE(eagain);
+		pid2 = wait(&status);
+
+		EXPECT_EQ(status, 0);
+		EXPECT_EQ(res, pid2);
+	} else {
+		/* child */
+		bool eagain = false;
+		size_t left = data;
+		char buf[16384];
+
+		while (left) {
+			int res = recv(self->cfd, buf,
+				       left > 16384 ? 16384 : left, 0);
+
+			if (res == -1 && errno == EAGAIN) {
+				eagain = true;
+				usleep(10000);
+				continue;
+			}
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+		EXPECT_TRUE(eagain);
+	}
+}
+
+static void
+test_mutliproc(struct __test_metadata *_metadata, struct _test_data_tls *self,
+	       bool sendpg, unsigned int n_readers, unsigned int n_writers)
+{
+	const unsigned int n_children = n_readers + n_writers;
+	const size_t data = 6 * 1000 * 1000;
+	const size_t file_sz = data / 100;
+	size_t read_bias, write_bias;
+	int i, fd, child_id;
+	char buf[file_sz];
+	pid_t pid;
+
+	/* Only allow multiples for simplicity */
+	ASSERT_EQ(!(n_readers % n_writers) || !(n_writers % n_readers), true);
+	read_bias = n_writers / n_readers ?: 1;
+	write_bias = n_readers / n_writers ?: 1;
+
+	/* prep a file to send */
+	fd = open("/tmp/", O_TMPFILE | O_RDWR, 0600);
+	ASSERT_GE(fd, 0);
+
+	memset(buf, 0xac, file_sz);
+	ASSERT_EQ(write(fd, buf, file_sz), file_sz);
+
+	/* spawn children */
+	for (child_id = 0; child_id < n_children; child_id++) {
+		pid = fork();
+		ASSERT_NE(pid, -1);
+		if (!pid)
+			break;
+	}
+
+	/* parent waits for all children */
+	if (pid) {
+		for (i = 0; i < n_children; i++) {
+			int status;
+
+			wait(&status);
+			EXPECT_EQ(status, 0);
+		}
+
+		return;
+	}
+
+	/* Split threads for reading and writing */
+	if (child_id < n_readers) {
+		size_t left = data * read_bias;
+		char rb[8001];
+
+		while (left) {
+			int res;
+
+			res = recv(self->cfd, rb,
+				   left > sizeof(rb) ? sizeof(rb) : left, 0);
+
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+	} else {
+		size_t left = data * write_bias;
+
+		while (left) {
+			int res;
+
+			ASSERT_EQ(lseek(fd, 0, SEEK_SET), 0);
+			if (sendpg)
+				res = sendfile(self->fd, fd, NULL,
+					       left > file_sz ? file_sz : left);
+			else
+				res = send(self->fd, buf,
+					   left > file_sz ? file_sz : left, 0);
+
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+	}
+}
+
+TEST_F(tls, mutliproc_even)
+{
+	test_mutliproc(_metadata, self, false, 6, 6);
+}
+
+TEST_F(tls, mutliproc_readers)
+{
+	test_mutliproc(_metadata, self, false, 4, 12);
+}
+
+TEST_F(tls, mutliproc_writers)
+{
+	test_mutliproc(_metadata, self, false, 10, 2);
+}
+
+TEST_F(tls, mutliproc_sendpage_even)
+{
+	test_mutliproc(_metadata, self, true, 6, 6);
+}
+
+TEST_F(tls, mutliproc_sendpage_readers)
+{
+	test_mutliproc(_metadata, self, true, 4, 12);
+}
+
+TEST_F(tls, mutliproc_sendpage_writers)
+{
+	test_mutliproc(_metadata, self, true, 10, 2);
+}
+
+TEST_F(tls, control_msg)
+{
+	if (self->notls)
+		return;
+
+	char cbuf[CMSG_SPACE(sizeof(char))];
+	char const *test_str = "test_read";
+	int cmsg_len = sizeof(char);
+	char record_type = 100;
+	struct cmsghdr *cmsg;
+	struct msghdr msg;
+	int send_len = 10;
+	struct iovec vec;
+	char buf[10];
+
+	vec.iov_base = (char *)test_str;
+	vec.iov_len = 10;
+	memset(&msg, 0, sizeof(struct msghdr));
+	msg.msg_iov = &vec;
+	msg.msg_iovlen = 1;
+	msg.msg_control = cbuf;
+	msg.msg_controllen = sizeof(cbuf);
+	cmsg = CMSG_FIRSTHDR(&msg);
+	cmsg->cmsg_level = SOL_TLS;
+	/* test sending non-record types. */
+	cmsg->cmsg_type = TLS_SET_RECORD_TYPE;
+	cmsg->cmsg_len = CMSG_LEN(cmsg_len);
+	*CMSG_DATA(cmsg) = record_type;
+	msg.msg_controllen = cmsg->cmsg_len;
+
+	EXPECT_EQ(sendmsg(self->fd, &msg, 0), send_len);
+	/* Should fail because we didn't provide a control message */
+	EXPECT_EQ(recv(self->cfd, buf, send_len, 0), -1);
+
+	vec.iov_base = buf;
+	EXPECT_EQ(recvmsg(self->cfd, &msg, MSG_WAITALL | MSG_PEEK), send_len);
+
+	cmsg = CMSG_FIRSTHDR(&msg);
+	EXPECT_NE(cmsg, NULL);
+	EXPECT_EQ(cmsg->cmsg_level, SOL_TLS);
+	EXPECT_EQ(cmsg->cmsg_type, TLS_GET_RECORD_TYPE);
+	record_type = *((unsigned char *)CMSG_DATA(cmsg));
+	EXPECT_EQ(record_type, 100);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+
+	/* Recv the message again without MSG_PEEK */
+	record_type = 0;
+	memset(buf, 0, sizeof(buf));
+
+	EXPECT_EQ(recvmsg(self->cfd, &msg, MSG_WAITALL), send_len);
+	cmsg = CMSG_FIRSTHDR(&msg);
+	EXPECT_NE(cmsg, NULL);
+	EXPECT_EQ(cmsg->cmsg_level, SOL_TLS);
+	EXPECT_EQ(cmsg->cmsg_type, TLS_GET_RECORD_TYPE);
+	record_type = *((unsigned char *)CMSG_DATA(cmsg));
+	EXPECT_EQ(record_type, 100);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+}
+
+TEST_F(tls, shutdown)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+	char buf[10];
+
+	ASSERT_EQ(strlen(test_str) + 1, send_len);
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+
+	shutdown(self->fd, SHUT_RDWR);
+	shutdown(self->cfd, SHUT_RDWR);
+}
+
+TEST_F(tls, shutdown_unsent)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, MSG_MORE), send_len);
+
+	shutdown(self->fd, SHUT_RDWR);
+	shutdown(self->cfd, SHUT_RDWR);
+}
+
+TEST_F(tls, shutdown_reuse)
+{
+	struct sockaddr_in addr;
+	int ret;
+
+	shutdown(self->fd, SHUT_RDWR);
+	shutdown(self->cfd, SHUT_RDWR);
+	close(self->cfd);
+
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = 0;
+
+	ret = bind(self->fd, &addr, sizeof(addr));
+	EXPECT_EQ(ret, 0);
+	ret = listen(self->fd, 10);
+	EXPECT_EQ(ret, -1);
+	EXPECT_EQ(errno, EINVAL);
+
+	ret = connect(self->fd, &addr, sizeof(addr));
+	EXPECT_EQ(ret, -1);
+	EXPECT_EQ(errno, EISCONN);
+}
+
+TEST(non_established) {
+	struct tls12_crypto_info_aes_gcm_256 tls12;
+	struct sockaddr_in addr;
+	int sfd, ret, fd;
+	socklen_t len;
+
+	len = sizeof(addr);
+
+	memset(&tls12, 0, sizeof(tls12));
+	tls12.info.version = TLS_1_2_VERSION;
+	tls12.info.cipher_type = TLS_CIPHER_AES_GCM_256;
+
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = 0;
+
+	fd = socket(AF_INET, SOCK_STREAM, 0);
+	sfd = socket(AF_INET, SOCK_STREAM, 0);
+
+	ret = bind(sfd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+	ret = listen(sfd, 10);
+	ASSERT_EQ(ret, 0);
+
+	ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	EXPECT_EQ(ret, -1);
+	/* TLS ULP not supported */
+	if (errno == ENOENT)
+		return;
+	EXPECT_EQ(errno, ENOTCONN);
+
+	ret = setsockopt(sfd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	EXPECT_EQ(ret, -1);
+	EXPECT_EQ(errno, ENOTCONN);
+
+	ret = getsockname(sfd, &addr, &len);
+	ASSERT_EQ(ret, 0);
+
+	ret = connect(fd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+
+	ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	ASSERT_EQ(ret, 0);
+
+	ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	EXPECT_EQ(ret, -1);
+	EXPECT_EQ(errno, EEXIST);
+
+	close(fd);
+	close(sfd);
+}
+
+TEST(keysizes) {
+	struct tls12_crypto_info_aes_gcm_256 tls12;
+	struct sockaddr_in addr;
+	int sfd, ret, fd, cfd;
+	socklen_t len;
+	bool notls;
+
+	notls = false;
+	len = sizeof(addr);
+
+	memset(&tls12, 0, sizeof(tls12));
+	tls12.info.version = TLS_1_2_VERSION;
+	tls12.info.cipher_type = TLS_CIPHER_AES_GCM_256;
+
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = 0;
+
+	fd = socket(AF_INET, SOCK_STREAM, 0);
+	sfd = socket(AF_INET, SOCK_STREAM, 0);
+
+	ret = bind(sfd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+	ret = listen(sfd, 10);
+	ASSERT_EQ(ret, 0);
+
+	ret = getsockname(sfd, &addr, &len);
+	ASSERT_EQ(ret, 0);
+
+	ret = connect(fd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+
+	ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	if (ret != 0) {
+		notls = true;
+		printf("Failure setting TCP_ULP, testing without tls\n");
+	}
+
+	if (!notls) {
+		ret = setsockopt(fd, SOL_TLS, TLS_TX, &tls12,
+				 sizeof(tls12));
+		EXPECT_EQ(ret, 0);
+	}
+
+	cfd = accept(sfd, &addr, &len);
+	ASSERT_GE(cfd, 0);
+
+	if (!notls) {
+		ret = setsockopt(cfd, IPPROTO_TCP, TCP_ULP, "tls",
+				 sizeof("tls"));
+		EXPECT_EQ(ret, 0);
+
+		ret = setsockopt(cfd, SOL_TLS, TLS_RX, &tls12,
+				 sizeof(tls12));
+		EXPECT_EQ(ret, 0);
+	}
+
+	close(sfd);
+	close(fd);
+	close(cfd);
+}
+
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/net/traceroute.sh b/tools/testing/selftests/net/traceroute.sh
new file mode 100755
index 000000000..de9ca97ab
--- /dev/null
+++ b/tools/testing/selftests/net/traceroute.sh
@@ -0,0 +1,322 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run traceroute/traceroute6 tests
+#
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+
+################################################################################
+#
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+run_cmd()
+{
+	local ns
+	local cmd
+	local out
+	local rc
+
+	ns="$1"
+	shift
+	cmd="$*"
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "    COMMAND: $cmd\n"
+	fi
+
+	out=$(eval ip netns exec ${ns} ${cmd} 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+################################################################################
+# create namespaces and interconnects
+
+create_ns()
+{
+	local ns=$1
+	local addr=$2
+	local addr6=$3
+
+	[ -z "${addr}" ] && addr="-"
+	[ -z "${addr6}" ] && addr6="-"
+
+	ip netns add ${ns}
+
+	ip netns exec ${ns} ip link set lo up
+	if [ "${addr}" != "-" ]; then
+		ip netns exec ${ns} ip addr add dev lo ${addr}
+	fi
+	if [ "${addr6}" != "-" ]; then
+		ip netns exec ${ns} ip -6 addr add dev lo ${addr6}
+	fi
+
+	ip netns exec ${ns} ip ro add unreachable default metric 8192
+	ip netns exec ${ns} ip -6 ro add unreachable default metric 8192
+
+	ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0
+}
+
+# create veth pair to connect namespaces and apply addresses.
+connect_ns()
+{
+	local ns1=$1
+	local ns1_dev=$2
+	local ns1_addr=$3
+	local ns1_addr6=$4
+	local ns2=$5
+	local ns2_dev=$6
+	local ns2_addr=$7
+	local ns2_addr6=$8
+
+	ip netns exec ${ns1} ip li add ${ns1_dev} type veth peer name tmp
+	ip netns exec ${ns1} ip li set ${ns1_dev} up
+	ip netns exec ${ns1} ip li set tmp netns ${ns2} name ${ns2_dev}
+	ip netns exec ${ns2} ip li set ${ns2_dev} up
+
+	if [ "${ns1_addr}" != "-" ]; then
+		ip netns exec ${ns1} ip addr add dev ${ns1_dev} ${ns1_addr}
+	fi
+
+	if [ "${ns2_addr}" != "-" ]; then
+		ip netns exec ${ns2} ip addr add dev ${ns2_dev} ${ns2_addr}
+	fi
+
+	if [ "${ns1_addr6}" != "-" ]; then
+		ip netns exec ${ns1} ip addr add dev ${ns1_dev} ${ns1_addr6}
+	fi
+
+	if [ "${ns2_addr6}" != "-" ]; then
+		ip netns exec ${ns2} ip addr add dev ${ns2_dev} ${ns2_addr6}
+	fi
+}
+
+################################################################################
+# traceroute6 test
+#
+# Verify that in this scenario
+#
+#        ------------------------ N2
+#         |                    |
+#       ------              ------  N3  ----
+#       | R1 |              | R2 |------|H2|
+#       ------              ------      ----
+#         |                    |
+#        ------------------------ N1
+#                  |
+#                 ----
+#                 |H1|
+#                 ----
+#
+# where H1's default route goes through R1 and R1's default route goes
+# through R2 over N2, traceroute6 from H1 to H2 reports R2's address
+# on N2 and not N1.
+#
+# Addresses are assigned as follows:
+#
+# N1: 2000:101::/64
+# N2: 2000:102::/64
+# N3: 2000:103::/64
+#
+# R1's host part of address: 1
+# R2's host part of address: 2
+# H1's host part of address: 3
+# H2's host part of address: 4
+#
+# For example:
+# the IPv6 address of R1's interface on N2 is 2000:102::1/64
+
+cleanup_traceroute6()
+{
+	local ns
+
+	for ns in host-1 host-2 router-1 router-2
+	do
+		ip netns del ${ns} 2>/dev/null
+	done
+}
+
+setup_traceroute6()
+{
+	brdev=br0
+
+	# start clean
+	cleanup_traceroute6
+
+	set -e
+	create_ns host-1
+	create_ns host-2
+	create_ns router-1
+	create_ns router-2
+
+	# Setup N3
+	connect_ns router-2 eth3 - 2000:103::2/64 host-2 eth3 - 2000:103::4/64
+	ip netns exec host-2 ip route add default via 2000:103::2
+
+	# Setup N2
+	connect_ns router-1 eth2 - 2000:102::1/64 router-2 eth2 - 2000:102::2/64
+	ip netns exec router-1 ip route add default via 2000:102::2
+
+	# Setup N1. host-1 and router-2 connect to a bridge in router-1.
+	ip netns exec router-1 ip link add name ${brdev} type bridge
+	ip netns exec router-1 ip link set ${brdev} up
+	ip netns exec router-1 ip addr add 2000:101::1/64 dev ${brdev}
+
+	connect_ns host-1 eth0 - 2000:101::3/64 router-1 eth0 - -
+	ip netns exec router-1 ip link set dev eth0 master ${brdev}
+	ip netns exec host-1 ip route add default via 2000:101::1
+
+	connect_ns router-2 eth1 - 2000:101::2/64 router-1 eth1 - -
+	ip netns exec router-1 ip link set dev eth1 master ${brdev}
+
+	# Prime the network
+	ip netns exec host-1 ping6 -c5 2000:103::4 >/dev/null 2>&1
+
+	set +e
+}
+
+run_traceroute6()
+{
+	if [ ! -x "$(command -v traceroute6)" ]; then
+		echo "SKIP: Could not run IPV6 test without traceroute6"
+		return
+	fi
+
+	setup_traceroute6
+
+	# traceroute6 host-2 from host-1 (expects 2000:102::2)
+	run_cmd host-1 "traceroute6 2000:103::4 | grep -q 2000:102::2"
+	log_test $? 0 "IPV6 traceroute"
+
+	cleanup_traceroute6
+}
+
+################################################################################
+# traceroute test
+#
+# Verify that traceroute from H1 to H2 shows 1.0.1.1 in this scenario
+#
+#                    1.0.3.1/24
+# ---- 1.0.1.3/24    1.0.1.1/24 ---- 1.0.2.1/24    1.0.2.4/24 ----
+# |H1|--------------------------|R1|--------------------------|H2|
+# ----            N1            ----            N2            ----
+#
+# where net.ipv4.icmp_errors_use_inbound_ifaddr is set on R1 and
+# 1.0.3.1/24 and 1.0.1.1/24 are respectively R1's primary and secondary
+# address on N1.
+#
+
+cleanup_traceroute()
+{
+	local ns
+
+	for ns in host-1 host-2 router
+	do
+		ip netns del ${ns} 2>/dev/null
+	done
+}
+
+setup_traceroute()
+{
+	# start clean
+	cleanup_traceroute
+
+	set -e
+	create_ns host-1
+	create_ns host-2
+	create_ns router
+
+	connect_ns host-1 eth0 1.0.1.3/24 - \
+	           router eth1 1.0.3.1/24 -
+	ip netns exec host-1 ip route add default via 1.0.1.1
+
+	ip netns exec router ip addr add 1.0.1.1/24 dev eth1
+	ip netns exec router sysctl -qw \
+				net.ipv4.icmp_errors_use_inbound_ifaddr=1
+
+	connect_ns host-2 eth0 1.0.2.4/24 - \
+	           router eth2 1.0.2.1/24 -
+	ip netns exec host-2 ip route add default via 1.0.2.1
+
+	# Prime the network
+	ip netns exec host-1 ping -c5 1.0.2.4 >/dev/null 2>&1
+
+	set +e
+}
+
+run_traceroute()
+{
+	if [ ! -x "$(command -v traceroute)" ]; then
+		echo "SKIP: Could not run IPV4 test without traceroute"
+		return
+	fi
+
+	setup_traceroute
+
+	# traceroute host-2 from host-1 (expects 1.0.1.1). Takes a while.
+	run_cmd host-1 "traceroute 1.0.2.4 | grep -q 1.0.1.1"
+	log_test $? 0 "IPV4 traceroute"
+
+	cleanup_traceroute
+}
+
+################################################################################
+# Run tests
+
+run_tests()
+{
+	run_traceroute6
+	run_traceroute
+}
+
+################################################################################
+# main
+
+declare -i nfail=0
+declare -i nsuccess=0
+
+while getopts :pv o
+do
+	case $o in
+		p) PAUSE_ON_FAIL=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		*) exit 1;;
+	esac
+done
+
+run_tests
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n"   ${nfail}
diff --git a/tools/testing/selftests/net/txring_overwrite.c b/tools/testing/selftests/net/txring_overwrite.c
new file mode 100644
index 000000000..7d9ea0394
--- /dev/null
+++ b/tools/testing/selftests/net/txring_overwrite.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Verify that consecutive sends over packet tx_ring are mirrored
+ * with their original content intact.
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <assert.h>
+#include <error.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/filter.h>
+#include <linux/if_packet.h>
+#include <net/ethernet.h>
+#include <net/if.h>
+#include <netinet/in.h>
+#include <netinet/ip.h>
+#include <netinet/udp.h>
+#include <poll.h>
+#include <pthread.h>
+#include <sched.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/utsname.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+const int eth_off = TPACKET_HDRLEN - sizeof(struct sockaddr_ll);
+const int cfg_frame_size = 1000;
+
+static void build_packet(void *buffer, size_t blen, char payload_char)
+{
+	struct udphdr *udph;
+	struct ethhdr *eth;
+	struct iphdr *iph;
+	size_t off = 0;
+
+	memset(buffer, 0, blen);
+
+	eth = buffer;
+	eth->h_proto = htons(ETH_P_IP);
+
+	off += sizeof(*eth);
+	iph = buffer + off;
+	iph->ttl	= 8;
+	iph->ihl	= 5;
+	iph->version	= 4;
+	iph->saddr	= htonl(INADDR_LOOPBACK);
+	iph->daddr	= htonl(INADDR_LOOPBACK + 1);
+	iph->protocol	= IPPROTO_UDP;
+	iph->tot_len	= htons(blen - off);
+	iph->check	= 0;
+
+	off += sizeof(*iph);
+	udph = buffer + off;
+	udph->dest	= htons(8000);
+	udph->source	= htons(8001);
+	udph->len	= htons(blen - off);
+	udph->check	= 0;
+
+	off += sizeof(*udph);
+	memset(buffer + off, payload_char, blen - off);
+}
+
+static int setup_rx(void)
+{
+	int fdr;
+
+	fdr = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_IP));
+	if (fdr == -1)
+		error(1, errno, "socket r");
+
+	return fdr;
+}
+
+static int setup_tx(char **ring)
+{
+	struct sockaddr_ll laddr = {};
+	struct tpacket_req req = {};
+	int fdt;
+
+	fdt = socket(PF_PACKET, SOCK_RAW, 0);
+	if (fdt == -1)
+		error(1, errno, "socket t");
+
+	laddr.sll_family = AF_PACKET;
+	laddr.sll_protocol = htons(0);
+	laddr.sll_ifindex = if_nametoindex("lo");
+	if (!laddr.sll_ifindex)
+		error(1, errno, "if_nametoindex");
+
+	if (bind(fdt, (void *)&laddr, sizeof(laddr)))
+		error(1, errno, "bind fdt");
+
+	req.tp_block_size = getpagesize();
+	req.tp_block_nr   = 1;
+	req.tp_frame_size = getpagesize();
+	req.tp_frame_nr   = 1;
+
+	if (setsockopt(fdt, SOL_PACKET, PACKET_TX_RING,
+		       (void *)&req, sizeof(req)))
+		error(1, errno, "setsockopt ring");
+
+	*ring = mmap(0, req.tp_block_size * req.tp_block_nr,
+		     PROT_READ | PROT_WRITE, MAP_SHARED, fdt, 0);
+	if (*ring == MAP_FAILED)
+		error(1, errno, "mmap");
+
+	return fdt;
+}
+
+static void send_pkt(int fdt, void *slot, char payload_char)
+{
+	struct tpacket_hdr *header = slot;
+	int ret;
+
+	while (header->tp_status != TP_STATUS_AVAILABLE)
+		usleep(1000);
+
+	build_packet(slot + eth_off, cfg_frame_size, payload_char);
+
+	header->tp_len = cfg_frame_size;
+	header->tp_status = TP_STATUS_SEND_REQUEST;
+
+	ret = sendto(fdt, NULL, 0, 0, NULL, 0);
+	if (ret == -1)
+		error(1, errno, "kick tx");
+}
+
+static int read_verify_pkt(int fdr, char payload_char)
+{
+	char buf[100];
+	int ret;
+
+	ret = read(fdr, buf, sizeof(buf));
+	if (ret != sizeof(buf))
+		error(1, errno, "read");
+
+	if (buf[60] != payload_char) {
+		printf("wrong pattern: 0x%x != 0x%x\n", buf[60], payload_char);
+		return 1;
+	}
+
+	printf("read: %c (0x%x)\n", buf[60], buf[60]);
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	const char payload_patterns[] = "ab";
+	char *ring;
+	int fdr, fdt, ret = 0;
+
+	fdr = setup_rx();
+	fdt = setup_tx(&ring);
+
+	send_pkt(fdt, ring, payload_patterns[0]);
+	send_pkt(fdt, ring, payload_patterns[1]);
+
+	ret |= read_verify_pkt(fdr, payload_patterns[0]);
+	ret |= read_verify_pkt(fdr, payload_patterns[1]);
+
+	if (close(fdt))
+		error(1, errno, "close t");
+	if (close(fdr))
+		error(1, errno, "close r");
+
+	return ret;
+}
diff --git a/tools/testing/selftests/net/txtimestamp.c b/tools/testing/selftests/net/txtimestamp.c
new file mode 100644
index 000000000..fabb1d555
--- /dev/null
+++ b/tools/testing/selftests/net/txtimestamp.c
@@ -0,0 +1,922 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2014 Google Inc.
+ * Author: willemb@google.com (Willem de Bruijn)
+ *
+ * Test software tx timestamping, including
+ *
+ * - SCHED, SND and ACK timestamps
+ * - RAW, UDP and TCP
+ * - IPv4 and IPv6
+ * - various packet sizes (to test GSO and TSO)
+ *
+ * Consult the command line arguments for help on running
+ * the various testcases.
+ *
+ * This test requires a dummy TCP server.
+ * A simple `nc6 [-u] -l -p $DESTPORT` will do
+ */
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <asm/types.h>
+#include <error.h>
+#include <errno.h>
+#include <inttypes.h>
+#include <linux/errqueue.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/ipv6.h>
+#include <linux/net_tstamp.h>
+#include <netdb.h>
+#include <net/if.h>
+#include <netinet/in.h>
+#include <netinet/ip.h>
+#include <netinet/udp.h>
+#include <netinet/tcp.h>
+#include <poll.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/epoll.h>
+#include <sys/ioctl.h>
+#include <sys/select.h>
+#include <sys/socket.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <time.h>
+#include <unistd.h>
+
+#define NSEC_PER_USEC	1000L
+#define USEC_PER_SEC	1000000L
+#define NSEC_PER_SEC	1000000000LL
+
+/* command line parameters */
+static int cfg_proto = SOCK_STREAM;
+static int cfg_ipproto = IPPROTO_TCP;
+static int cfg_num_pkts = 4;
+static int do_ipv4 = 1;
+static int do_ipv6 = 1;
+static int cfg_payload_len = 10;
+static int cfg_poll_timeout = 100;
+static int cfg_delay_snd;
+static int cfg_delay_ack;
+static int cfg_delay_tolerance_usec = 500;
+static bool cfg_show_payload;
+static bool cfg_do_pktinfo;
+static bool cfg_busy_poll;
+static int cfg_sleep_usec = 50 * 1000;
+static bool cfg_loop_nodata;
+static bool cfg_use_cmsg;
+static bool cfg_use_pf_packet;
+static bool cfg_use_epoll;
+static bool cfg_epollet;
+static bool cfg_do_listen;
+static uint16_t dest_port = 9000;
+static bool cfg_print_nsec;
+
+static struct sockaddr_in daddr;
+static struct sockaddr_in6 daddr6;
+static struct timespec ts_usr;
+
+static int saved_tskey = -1;
+static int saved_tskey_type = -1;
+
+struct timing_event {
+	int64_t min;
+	int64_t max;
+	int64_t total;
+	int count;
+};
+
+static struct timing_event usr_enq;
+static struct timing_event usr_snd;
+static struct timing_event usr_ack;
+
+static bool test_failed;
+
+static int64_t timespec_to_ns64(struct timespec *ts)
+{
+	return ts->tv_sec * NSEC_PER_SEC + ts->tv_nsec;
+}
+
+static int64_t timespec_to_us64(struct timespec *ts)
+{
+	return ts->tv_sec * USEC_PER_SEC + ts->tv_nsec / NSEC_PER_USEC;
+}
+
+static void init_timing_event(struct timing_event *te)
+{
+	te->min = INT64_MAX;
+	te->max = 0;
+	te->total = 0;
+	te->count = 0;
+}
+
+static void add_timing_event(struct timing_event *te,
+		struct timespec *t_start, struct timespec *t_end)
+{
+	int64_t ts_delta = timespec_to_ns64(t_end) - timespec_to_ns64(t_start);
+
+	te->count++;
+	if (ts_delta < te->min)
+		te->min = ts_delta;
+	if (ts_delta > te->max)
+		te->max = ts_delta;
+	te->total += ts_delta;
+}
+
+static void validate_key(int tskey, int tstype)
+{
+	int stepsize;
+
+	/* compare key for each subsequent request
+	 * must only test for one type, the first one requested
+	 */
+	if (saved_tskey == -1)
+		saved_tskey_type = tstype;
+	else if (saved_tskey_type != tstype)
+		return;
+
+	stepsize = cfg_proto == SOCK_STREAM ? cfg_payload_len : 1;
+	if (tskey != saved_tskey + stepsize) {
+		fprintf(stderr, "ERROR: key %d, expected %d\n",
+				tskey, saved_tskey + stepsize);
+		test_failed = true;
+	}
+
+	saved_tskey = tskey;
+}
+
+static void validate_timestamp(struct timespec *cur, int min_delay)
+{
+	int64_t cur64, start64;
+	int max_delay;
+
+	cur64 = timespec_to_us64(cur);
+	start64 = timespec_to_us64(&ts_usr);
+	max_delay = min_delay + cfg_delay_tolerance_usec;
+
+	if (cur64 < start64 + min_delay || cur64 > start64 + max_delay) {
+		fprintf(stderr, "ERROR: %lu us expected between %d and %d\n",
+				cur64 - start64, min_delay, max_delay);
+		test_failed = true;
+	}
+}
+
+static void __print_ts_delta_formatted(int64_t ts_delta)
+{
+	if (cfg_print_nsec)
+		fprintf(stderr, "%lu ns", ts_delta);
+	else
+		fprintf(stderr, "%lu us", ts_delta / NSEC_PER_USEC);
+}
+
+static void __print_timestamp(const char *name, struct timespec *cur,
+			      uint32_t key, int payload_len)
+{
+	int64_t ts_delta;
+
+	if (!(cur->tv_sec | cur->tv_nsec))
+		return;
+
+	if (cfg_print_nsec)
+		fprintf(stderr, "  %s: %lu s %lu ns (seq=%u, len=%u)",
+				name, cur->tv_sec, cur->tv_nsec,
+				key, payload_len);
+	else
+		fprintf(stderr, "  %s: %lu s %lu us (seq=%u, len=%u)",
+				name, cur->tv_sec, cur->tv_nsec / NSEC_PER_USEC,
+				key, payload_len);
+
+	if (cur != &ts_usr) {
+		ts_delta = timespec_to_ns64(cur) - timespec_to_ns64(&ts_usr);
+		fprintf(stderr, "  (USR +");
+		__print_ts_delta_formatted(ts_delta);
+		fprintf(stderr, ")");
+	}
+
+	fprintf(stderr, "\n");
+}
+
+static void print_timestamp_usr(void)
+{
+	if (clock_gettime(CLOCK_REALTIME, &ts_usr))
+		error(1, errno, "clock_gettime");
+
+	__print_timestamp("  USR", &ts_usr, 0, 0);
+}
+
+static void print_timestamp(struct scm_timestamping *tss, int tstype,
+			    int tskey, int payload_len)
+{
+	const char *tsname;
+
+	validate_key(tskey, tstype);
+
+	switch (tstype) {
+	case SCM_TSTAMP_SCHED:
+		tsname = "  ENQ";
+		validate_timestamp(&tss->ts[0], 0);
+		add_timing_event(&usr_enq, &ts_usr, &tss->ts[0]);
+		break;
+	case SCM_TSTAMP_SND:
+		tsname = "  SND";
+		validate_timestamp(&tss->ts[0], cfg_delay_snd);
+		add_timing_event(&usr_snd, &ts_usr, &tss->ts[0]);
+		break;
+	case SCM_TSTAMP_ACK:
+		tsname = "  ACK";
+		validate_timestamp(&tss->ts[0], cfg_delay_ack);
+		add_timing_event(&usr_ack, &ts_usr, &tss->ts[0]);
+		break;
+	default:
+		error(1, 0, "unknown timestamp type: %u",
+		tstype);
+	}
+	__print_timestamp(tsname, &tss->ts[0], tskey, payload_len);
+}
+
+static void print_timing_event(char *name, struct timing_event *te)
+{
+	if (!te->count)
+		return;
+
+	fprintf(stderr, "    %s: count=%d", name, te->count);
+	fprintf(stderr, ", avg=");
+	__print_ts_delta_formatted((int64_t)(te->total / te->count));
+	fprintf(stderr, ", min=");
+	__print_ts_delta_formatted(te->min);
+	fprintf(stderr, ", max=");
+	__print_ts_delta_formatted(te->max);
+	fprintf(stderr, "\n");
+}
+
+/* TODO: convert to check_and_print payload once API is stable */
+static void print_payload(char *data, int len)
+{
+	int i;
+
+	if (!len)
+		return;
+
+	if (len > 70)
+		len = 70;
+
+	fprintf(stderr, "payload: ");
+	for (i = 0; i < len; i++)
+		fprintf(stderr, "%02hhx ", data[i]);
+	fprintf(stderr, "\n");
+}
+
+static void print_pktinfo(int family, int ifindex, void *saddr, void *daddr)
+{
+	char sa[INET6_ADDRSTRLEN], da[INET6_ADDRSTRLEN];
+
+	fprintf(stderr, "         pktinfo: ifindex=%u src=%s dst=%s\n",
+		ifindex,
+		saddr ? inet_ntop(family, saddr, sa, sizeof(sa)) : "unknown",
+		daddr ? inet_ntop(family, daddr, da, sizeof(da)) : "unknown");
+}
+
+static void __epoll(int epfd)
+{
+	struct epoll_event events;
+	int ret;
+
+	memset(&events, 0, sizeof(events));
+	ret = epoll_wait(epfd, &events, 1, cfg_poll_timeout);
+	if (ret != 1)
+		error(1, errno, "epoll_wait");
+}
+
+static void __poll(int fd)
+{
+	struct pollfd pollfd;
+	int ret;
+
+	memset(&pollfd, 0, sizeof(pollfd));
+	pollfd.fd = fd;
+	ret = poll(&pollfd, 1, cfg_poll_timeout);
+	if (ret != 1)
+		error(1, errno, "poll");
+}
+
+static void __recv_errmsg_cmsg(struct msghdr *msg, int payload_len)
+{
+	struct sock_extended_err *serr = NULL;
+	struct scm_timestamping *tss = NULL;
+	struct cmsghdr *cm;
+	int batch = 0;
+
+	for (cm = CMSG_FIRSTHDR(msg);
+	     cm && cm->cmsg_len;
+	     cm = CMSG_NXTHDR(msg, cm)) {
+		if (cm->cmsg_level == SOL_SOCKET &&
+		    cm->cmsg_type == SCM_TIMESTAMPING) {
+			tss = (void *) CMSG_DATA(cm);
+		} else if ((cm->cmsg_level == SOL_IP &&
+			    cm->cmsg_type == IP_RECVERR) ||
+			   (cm->cmsg_level == SOL_IPV6 &&
+			    cm->cmsg_type == IPV6_RECVERR) ||
+			   (cm->cmsg_level == SOL_PACKET &&
+			    cm->cmsg_type == PACKET_TX_TIMESTAMP)) {
+			serr = (void *) CMSG_DATA(cm);
+			if (serr->ee_errno != ENOMSG ||
+			    serr->ee_origin != SO_EE_ORIGIN_TIMESTAMPING) {
+				fprintf(stderr, "unknown ip error %d %d\n",
+						serr->ee_errno,
+						serr->ee_origin);
+				serr = NULL;
+			}
+		} else if (cm->cmsg_level == SOL_IP &&
+			   cm->cmsg_type == IP_PKTINFO) {
+			struct in_pktinfo *info = (void *) CMSG_DATA(cm);
+			print_pktinfo(AF_INET, info->ipi_ifindex,
+				      &info->ipi_spec_dst, &info->ipi_addr);
+		} else if (cm->cmsg_level == SOL_IPV6 &&
+			   cm->cmsg_type == IPV6_PKTINFO) {
+			struct in6_pktinfo *info6 = (void *) CMSG_DATA(cm);
+			print_pktinfo(AF_INET6, info6->ipi6_ifindex,
+				      NULL, &info6->ipi6_addr);
+		} else
+			fprintf(stderr, "unknown cmsg %d,%d\n",
+					cm->cmsg_level, cm->cmsg_type);
+
+		if (serr && tss) {
+			print_timestamp(tss, serr->ee_info, serr->ee_data,
+					payload_len);
+			serr = NULL;
+			tss = NULL;
+			batch++;
+		}
+	}
+
+	if (batch > 1)
+		fprintf(stderr, "batched %d timestamps\n", batch);
+}
+
+static int recv_errmsg(int fd)
+{
+	static char ctrl[1024 /* overprovision*/];
+	static struct msghdr msg;
+	struct iovec entry;
+	static char *data;
+	int ret = 0;
+
+	data = malloc(cfg_payload_len);
+	if (!data)
+		error(1, 0, "malloc");
+
+	memset(&msg, 0, sizeof(msg));
+	memset(&entry, 0, sizeof(entry));
+	memset(ctrl, 0, sizeof(ctrl));
+
+	entry.iov_base = data;
+	entry.iov_len = cfg_payload_len;
+	msg.msg_iov = &entry;
+	msg.msg_iovlen = 1;
+	msg.msg_name = NULL;
+	msg.msg_namelen = 0;
+	msg.msg_control = ctrl;
+	msg.msg_controllen = sizeof(ctrl);
+
+	ret = recvmsg(fd, &msg, MSG_ERRQUEUE);
+	if (ret == -1 && errno != EAGAIN)
+		error(1, errno, "recvmsg");
+
+	if (ret >= 0) {
+		__recv_errmsg_cmsg(&msg, ret);
+		if (cfg_show_payload)
+			print_payload(data, cfg_payload_len);
+	}
+
+	free(data);
+	return ret == -1;
+}
+
+static uint16_t get_ip_csum(const uint16_t *start, int num_words,
+			    unsigned long sum)
+{
+	int i;
+
+	for (i = 0; i < num_words; i++)
+		sum += start[i];
+
+	while (sum >> 16)
+		sum = (sum & 0xFFFF) + (sum >> 16);
+
+	return ~sum;
+}
+
+static uint16_t get_udp_csum(const struct udphdr *udph, int alen)
+{
+	unsigned long pseudo_sum, csum_len;
+	const void *csum_start = udph;
+
+	pseudo_sum = htons(IPPROTO_UDP);
+	pseudo_sum += udph->len;
+
+	/* checksum ip(v6) addresses + udp header + payload */
+	csum_start -= alen * 2;
+	csum_len = ntohs(udph->len) + alen * 2;
+
+	return get_ip_csum(csum_start, csum_len >> 1, pseudo_sum);
+}
+
+static int fill_header_ipv4(void *p)
+{
+	struct iphdr *iph = p;
+
+	memset(iph, 0, sizeof(*iph));
+
+	iph->ihl	= 5;
+	iph->version	= 4;
+	iph->ttl	= 2;
+	iph->saddr	= daddr.sin_addr.s_addr;	/* set for udp csum calc */
+	iph->daddr	= daddr.sin_addr.s_addr;
+	iph->protocol	= IPPROTO_UDP;
+
+	/* kernel writes saddr, csum, len */
+
+	return sizeof(*iph);
+}
+
+static int fill_header_ipv6(void *p)
+{
+	struct ipv6hdr *ip6h = p;
+
+	memset(ip6h, 0, sizeof(*ip6h));
+
+	ip6h->version		= 6;
+	ip6h->payload_len	= htons(sizeof(struct udphdr) + cfg_payload_len);
+	ip6h->nexthdr		= IPPROTO_UDP;
+	ip6h->hop_limit		= 64;
+
+	ip6h->saddr             = daddr6.sin6_addr;
+	ip6h->daddr		= daddr6.sin6_addr;
+
+	/* kernel does not write saddr in case of ipv6 */
+
+	return sizeof(*ip6h);
+}
+
+static void fill_header_udp(void *p, bool is_ipv4)
+{
+	struct udphdr *udph = p;
+
+	udph->source = ntohs(dest_port + 1);	/* spoof */
+	udph->dest   = ntohs(dest_port);
+	udph->len    = ntohs(sizeof(*udph) + cfg_payload_len);
+	udph->check  = 0;
+
+	udph->check  = get_udp_csum(udph, is_ipv4 ? sizeof(struct in_addr) :
+						    sizeof(struct in6_addr));
+}
+
+static void do_test(int family, unsigned int report_opt)
+{
+	char control[CMSG_SPACE(sizeof(uint32_t))];
+	struct sockaddr_ll laddr;
+	unsigned int sock_opt;
+	struct cmsghdr *cmsg;
+	struct msghdr msg;
+	struct iovec iov;
+	char *buf;
+	int fd, i, val = 1, total_len, epfd = 0;
+
+	init_timing_event(&usr_enq);
+	init_timing_event(&usr_snd);
+	init_timing_event(&usr_ack);
+
+	total_len = cfg_payload_len;
+	if (cfg_use_pf_packet || cfg_proto == SOCK_RAW) {
+		total_len += sizeof(struct udphdr);
+		if (cfg_use_pf_packet || cfg_ipproto == IPPROTO_RAW) {
+			if (family == PF_INET)
+				total_len += sizeof(struct iphdr);
+			else
+				total_len += sizeof(struct ipv6hdr);
+		}
+		/* special case, only rawv6_sendmsg:
+		 * pass proto in sin6_port if not connected
+		 * also see ANK comment in net/ipv4/raw.c
+		 */
+		daddr6.sin6_port = htons(cfg_ipproto);
+	}
+
+	buf = malloc(total_len);
+	if (!buf)
+		error(1, 0, "malloc");
+
+	fd = socket(cfg_use_pf_packet ? PF_PACKET : family,
+		    cfg_proto, cfg_ipproto);
+	if (fd < 0)
+		error(1, errno, "socket");
+
+	if (cfg_use_epoll) {
+		struct epoll_event ev;
+
+		memset(&ev, 0, sizeof(ev));
+		ev.data.fd = fd;
+		if (cfg_epollet)
+			ev.events |= EPOLLET;
+		epfd = epoll_create(1);
+		if (epfd <= 0)
+			error(1, errno, "epoll_create");
+		if (epoll_ctl(epfd, EPOLL_CTL_ADD, fd, &ev))
+			error(1, errno, "epoll_ctl");
+	}
+
+	/* reset expected key on each new socket */
+	saved_tskey = -1;
+
+	if (cfg_proto == SOCK_STREAM) {
+		if (setsockopt(fd, IPPROTO_TCP, TCP_NODELAY,
+			       (char*) &val, sizeof(val)))
+			error(1, 0, "setsockopt no nagle");
+
+		if (family == PF_INET) {
+			if (connect(fd, (void *) &daddr, sizeof(daddr)))
+				error(1, errno, "connect ipv4");
+		} else {
+			if (connect(fd, (void *) &daddr6, sizeof(daddr6)))
+				error(1, errno, "connect ipv6");
+		}
+	}
+
+	if (cfg_do_pktinfo) {
+		if (family == AF_INET6) {
+			if (setsockopt(fd, SOL_IPV6, IPV6_RECVPKTINFO,
+				       &val, sizeof(val)))
+				error(1, errno, "setsockopt pktinfo ipv6");
+		} else {
+			if (setsockopt(fd, SOL_IP, IP_PKTINFO,
+				       &val, sizeof(val)))
+				error(1, errno, "setsockopt pktinfo ipv4");
+		}
+	}
+
+	sock_opt = SOF_TIMESTAMPING_SOFTWARE |
+		   SOF_TIMESTAMPING_OPT_CMSG |
+		   SOF_TIMESTAMPING_OPT_ID;
+
+	if (!cfg_use_cmsg)
+		sock_opt |= report_opt;
+
+	if (cfg_loop_nodata)
+		sock_opt |= SOF_TIMESTAMPING_OPT_TSONLY;
+
+	if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING,
+		       (char *) &sock_opt, sizeof(sock_opt)))
+		error(1, 0, "setsockopt timestamping");
+
+	for (i = 0; i < cfg_num_pkts; i++) {
+		memset(&msg, 0, sizeof(msg));
+		memset(buf, 'a' + i, total_len);
+
+		if (cfg_use_pf_packet || cfg_proto == SOCK_RAW) {
+			int off = 0;
+
+			if (cfg_use_pf_packet || cfg_ipproto == IPPROTO_RAW) {
+				if (family == PF_INET)
+					off = fill_header_ipv4(buf);
+				else
+					off = fill_header_ipv6(buf);
+			}
+
+			fill_header_udp(buf + off, family == PF_INET);
+		}
+
+		print_timestamp_usr();
+
+		iov.iov_base = buf;
+		iov.iov_len = total_len;
+
+		if (cfg_proto != SOCK_STREAM) {
+			if (cfg_use_pf_packet) {
+				memset(&laddr, 0, sizeof(laddr));
+
+				laddr.sll_family	= AF_PACKET;
+				laddr.sll_ifindex	= 1;
+				laddr.sll_protocol	= htons(family == AF_INET ? ETH_P_IP : ETH_P_IPV6);
+				laddr.sll_halen		= ETH_ALEN;
+
+				msg.msg_name = (void *)&laddr;
+				msg.msg_namelen = sizeof(laddr);
+			} else if (family == PF_INET) {
+				msg.msg_name = (void *)&daddr;
+				msg.msg_namelen = sizeof(daddr);
+			} else {
+				msg.msg_name = (void *)&daddr6;
+				msg.msg_namelen = sizeof(daddr6);
+			}
+		}
+
+		msg.msg_iov = &iov;
+		msg.msg_iovlen = 1;
+
+		if (cfg_use_cmsg) {
+			memset(control, 0, sizeof(control));
+
+			msg.msg_control = control;
+			msg.msg_controllen = sizeof(control);
+
+			cmsg = CMSG_FIRSTHDR(&msg);
+			cmsg->cmsg_level = SOL_SOCKET;
+			cmsg->cmsg_type = SO_TIMESTAMPING;
+			cmsg->cmsg_len = CMSG_LEN(sizeof(uint32_t));
+
+			*((uint32_t *) CMSG_DATA(cmsg)) = report_opt;
+		}
+
+		val = sendmsg(fd, &msg, 0);
+		if (val != total_len)
+			error(1, errno, "send");
+
+		/* wait for all errors to be queued, else ACKs arrive OOO */
+		if (cfg_sleep_usec)
+			usleep(cfg_sleep_usec);
+
+		if (!cfg_busy_poll) {
+			if (cfg_use_epoll)
+				__epoll(epfd);
+			else
+				__poll(fd);
+		}
+
+		while (!recv_errmsg(fd)) {}
+	}
+
+	print_timing_event("USR-ENQ", &usr_enq);
+	print_timing_event("USR-SND", &usr_snd);
+	print_timing_event("USR-ACK", &usr_ack);
+
+	if (close(fd))
+		error(1, errno, "close");
+
+	free(buf);
+	usleep(100 * NSEC_PER_USEC);
+}
+
+static void __attribute__((noreturn)) usage(const char *filepath)
+{
+	fprintf(stderr, "\nUsage: %s [options] hostname\n"
+			"\nwhere options are:\n"
+			"  -4:   only IPv4\n"
+			"  -6:   only IPv6\n"
+			"  -h:   show this message\n"
+			"  -b:   busy poll to read from error queue\n"
+			"  -c N: number of packets for each test\n"
+			"  -C:   use cmsg to set tstamp recording options\n"
+			"  -e:   use level-triggered epoll() instead of poll()\n"
+			"  -E:   use event-triggered epoll() instead of poll()\n"
+			"  -F:   poll()/epoll() waits forever for an event\n"
+			"  -I:   request PKTINFO\n"
+			"  -l N: send N bytes at a time\n"
+			"  -L    listen on hostname and port\n"
+			"  -n:   set no-payload option\n"
+			"  -N:   print timestamps and durations in nsec (instead of usec)\n"
+			"  -p N: connect to port N\n"
+			"  -P:   use PF_PACKET\n"
+			"  -r:   use raw\n"
+			"  -R:   use raw (IP_HDRINCL)\n"
+			"  -S N: usec to sleep before reading error queue\n"
+			"  -t N: tolerance (usec) for timestamp validation\n"
+			"  -u:   use udp\n"
+			"  -v:   validate SND delay (usec)\n"
+			"  -V:   validate ACK delay (usec)\n"
+			"  -x:   show payload (up to 70 bytes)\n",
+			filepath);
+	exit(1);
+}
+
+static void parse_opt(int argc, char **argv)
+{
+	int proto_count = 0;
+	int c;
+
+	while ((c = getopt(argc, argv,
+				"46bc:CeEFhIl:LnNp:PrRS:t:uv:V:x")) != -1) {
+		switch (c) {
+		case '4':
+			do_ipv6 = 0;
+			break;
+		case '6':
+			do_ipv4 = 0;
+			break;
+		case 'b':
+			cfg_busy_poll = true;
+			break;
+		case 'c':
+			cfg_num_pkts = strtoul(optarg, NULL, 10);
+			break;
+		case 'C':
+			cfg_use_cmsg = true;
+			break;
+		case 'e':
+			cfg_use_epoll = true;
+			break;
+		case 'E':
+			cfg_use_epoll = true;
+			cfg_epollet = true;
+		case 'F':
+			cfg_poll_timeout = -1;
+			break;
+		case 'I':
+			cfg_do_pktinfo = true;
+			break;
+		case 'l':
+			cfg_payload_len = strtoul(optarg, NULL, 10);
+			break;
+		case 'L':
+			cfg_do_listen = true;
+			break;
+		case 'n':
+			cfg_loop_nodata = true;
+			break;
+		case 'N':
+			cfg_print_nsec = true;
+			break;
+		case 'p':
+			dest_port = strtoul(optarg, NULL, 10);
+			break;
+		case 'P':
+			proto_count++;
+			cfg_use_pf_packet = true;
+			cfg_proto = SOCK_DGRAM;
+			cfg_ipproto = 0;
+			break;
+		case 'r':
+			proto_count++;
+			cfg_proto = SOCK_RAW;
+			cfg_ipproto = IPPROTO_UDP;
+			break;
+		case 'R':
+			proto_count++;
+			cfg_proto = SOCK_RAW;
+			cfg_ipproto = IPPROTO_RAW;
+			break;
+		case 'S':
+			cfg_sleep_usec = strtoul(optarg, NULL, 10);
+			break;
+		case 't':
+			cfg_delay_tolerance_usec = strtoul(optarg, NULL, 10);
+			break;
+		case 'u':
+			proto_count++;
+			cfg_proto = SOCK_DGRAM;
+			cfg_ipproto = IPPROTO_UDP;
+			break;
+		case 'v':
+			cfg_delay_snd = strtoul(optarg, NULL, 10);
+			break;
+		case 'V':
+			cfg_delay_ack = strtoul(optarg, NULL, 10);
+			break;
+		case 'x':
+			cfg_show_payload = true;
+			break;
+		case 'h':
+		default:
+			usage(argv[0]);
+		}
+	}
+
+	if (!cfg_payload_len)
+		error(1, 0, "payload may not be nonzero");
+	if (cfg_proto != SOCK_STREAM && cfg_payload_len > 1472)
+		error(1, 0, "udp packet might exceed expected MTU");
+	if (!do_ipv4 && !do_ipv6)
+		error(1, 0, "pass -4 or -6, not both");
+	if (proto_count > 1)
+		error(1, 0, "pass -P, -r, -R or -u, not multiple");
+	if (cfg_do_pktinfo && cfg_use_pf_packet)
+		error(1, 0, "cannot ask for pktinfo over pf_packet");
+	if (cfg_busy_poll && cfg_use_epoll)
+		error(1, 0, "pass epoll or busy_poll, not both");
+
+	if (optind != argc - 1)
+		error(1, 0, "missing required hostname argument");
+}
+
+static void resolve_hostname(const char *hostname)
+{
+	struct addrinfo hints = { .ai_family = do_ipv4 ? AF_INET : AF_INET6 };
+	struct addrinfo *addrs, *cur;
+	int have_ipv4 = 0, have_ipv6 = 0;
+
+retry:
+	if (getaddrinfo(hostname, NULL, &hints, &addrs))
+		error(1, errno, "getaddrinfo");
+
+	cur = addrs;
+	while (cur && !have_ipv4 && !have_ipv6) {
+		if (!have_ipv4 && cur->ai_family == AF_INET) {
+			memcpy(&daddr, cur->ai_addr, sizeof(daddr));
+			daddr.sin_port = htons(dest_port);
+			have_ipv4 = 1;
+		}
+		else if (!have_ipv6 && cur->ai_family == AF_INET6) {
+			memcpy(&daddr6, cur->ai_addr, sizeof(daddr6));
+			daddr6.sin6_port = htons(dest_port);
+			have_ipv6 = 1;
+		}
+		cur = cur->ai_next;
+	}
+	if (addrs)
+		freeaddrinfo(addrs);
+
+	if (do_ipv6 && hints.ai_family != AF_INET6) {
+		hints.ai_family = AF_INET6;
+		goto retry;
+	}
+
+	do_ipv4 &= have_ipv4;
+	do_ipv6 &= have_ipv6;
+}
+
+static void do_listen(int family, void *addr, int alen)
+{
+	int fd, type;
+
+	type = cfg_proto == SOCK_RAW ? SOCK_DGRAM : cfg_proto;
+
+	fd = socket(family, type, 0);
+	if (fd == -1)
+		error(1, errno, "socket rx");
+
+	if (bind(fd, addr, alen))
+		error(1, errno, "bind rx");
+
+	if (type == SOCK_STREAM && listen(fd, 10))
+		error(1, errno, "listen rx");
+
+	/* leave fd open, will be closed on process exit.
+	 * this enables connect() to succeed and avoids icmp replies
+	 */
+}
+
+static void do_main(int family)
+{
+	fprintf(stderr, "family:       %s %s\n",
+			family == PF_INET ? "INET" : "INET6",
+			cfg_use_pf_packet ? "(PF_PACKET)" : "");
+
+	fprintf(stderr, "test SND\n");
+	do_test(family, SOF_TIMESTAMPING_TX_SOFTWARE);
+
+	fprintf(stderr, "test ENQ\n");
+	do_test(family, SOF_TIMESTAMPING_TX_SCHED);
+
+	fprintf(stderr, "test ENQ + SND\n");
+	do_test(family, SOF_TIMESTAMPING_TX_SCHED |
+			SOF_TIMESTAMPING_TX_SOFTWARE);
+
+	if (cfg_proto == SOCK_STREAM) {
+		fprintf(stderr, "\ntest ACK\n");
+		do_test(family, SOF_TIMESTAMPING_TX_ACK);
+
+		fprintf(stderr, "\ntest SND + ACK\n");
+		do_test(family, SOF_TIMESTAMPING_TX_SOFTWARE |
+				SOF_TIMESTAMPING_TX_ACK);
+
+		fprintf(stderr, "\ntest ENQ + SND + ACK\n");
+		do_test(family, SOF_TIMESTAMPING_TX_SCHED |
+				SOF_TIMESTAMPING_TX_SOFTWARE |
+				SOF_TIMESTAMPING_TX_ACK);
+	}
+}
+
+const char *sock_names[] = { NULL, "TCP", "UDP", "RAW" };
+
+int main(int argc, char **argv)
+{
+	if (argc == 1)
+		usage(argv[0]);
+
+	parse_opt(argc, argv);
+	resolve_hostname(argv[argc - 1]);
+
+	fprintf(stderr, "protocol:     %s\n", sock_names[cfg_proto]);
+	fprintf(stderr, "payload:      %u\n", cfg_payload_len);
+	fprintf(stderr, "server port:  %u\n", dest_port);
+	fprintf(stderr, "\n");
+
+	if (do_ipv4) {
+		if (cfg_do_listen)
+			do_listen(PF_INET, &daddr, sizeof(daddr));
+		do_main(PF_INET);
+	}
+
+	if (do_ipv6) {
+		if (cfg_do_listen)
+			do_listen(PF_INET6, &daddr6, sizeof(daddr6));
+		do_main(PF_INET6);
+	}
+
+	return test_failed;
+}
diff --git a/tools/testing/selftests/net/txtimestamp.sh b/tools/testing/selftests/net/txtimestamp.sh
new file mode 100755
index 000000000..31637769f
--- /dev/null
+++ b/tools/testing/selftests/net/txtimestamp.sh
@@ -0,0 +1,82 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Send packets with transmit timestamps over loopback with netem
+# Verify that timestamps correspond to netem delay
+
+set -e
+
+setup() {
+	# set 1ms delay on lo egress
+	tc qdisc add dev lo root netem delay 1ms
+
+	# set 2ms delay on ifb0 egress
+	modprobe ifb
+	ip link add ifb_netem0 type ifb
+	ip link set dev ifb_netem0 up
+	tc qdisc add dev ifb_netem0 root netem delay 2ms
+
+	# redirect lo ingress through ifb0 egress
+	tc qdisc add dev lo handle ffff: ingress
+	tc filter add dev lo parent ffff: \
+		u32 match mark 0 0xffff \
+		action mirred egress redirect dev ifb_netem0
+}
+
+run_test_v4v6() {
+	# SND will be delayed 1000us
+	# ACK will be delayed 6000us: 1 + 2 ms round-trip
+	local -r args="$@ -v 1000 -V 6000"
+
+	./txtimestamp ${args} -4 -L 127.0.0.1
+	./txtimestamp ${args} -6 -L ::1
+}
+
+run_test_tcpudpraw() {
+	local -r args=$@
+
+	run_test_v4v6 ${args}		# tcp
+	run_test_v4v6 ${args} -u	# udp
+	run_test_v4v6 ${args} -r	# raw
+	run_test_v4v6 ${args} -R	# raw (IPPROTO_RAW)
+	run_test_v4v6 ${args} -P	# pf_packet
+}
+
+run_test_all() {
+	setup
+	run_test_tcpudpraw		# setsockopt
+	run_test_tcpudpraw -C		# cmsg
+	run_test_tcpudpraw -n		# timestamp w/o data
+	echo "OK. All tests passed"
+}
+
+run_test_one() {
+	setup
+	./txtimestamp $@
+}
+
+usage() {
+	echo "Usage: $0 [ -r | --run ] <txtimestamp args> | [ -h | --help ]"
+	echo "  (no args)  Run all tests"
+	echo "  -r|--run  Run an individual test with arguments"
+	echo "  -h|--help Help"
+}
+
+main() {
+	if [[ $# -eq 0 ]]; then
+		run_test_all
+	else
+		if [[ "$1" = "-r" || "$1" == "--run" ]]; then
+			shift
+			run_test_one $@
+		else
+			usage
+		fi
+	fi
+}
+
+if [[ -z "$(ip netns identify)" ]]; then
+	./in_netns.sh $0 $@
+else
+	main $@
+fi
diff --git a/tools/testing/selftests/net/udpgro.sh b/tools/testing/selftests/net/udpgro.sh
new file mode 100755
index 000000000..f8a19f548
--- /dev/null
+++ b/tools/testing/selftests/net/udpgro.sh
@@ -0,0 +1,216 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run a series of udpgro functional tests.
+
+readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+
+# set global exit status, but never reset nonzero one.
+check_err()
+{
+	if [ $ret -eq 0 ]; then
+		ret=$1
+	fi
+}
+
+cleanup() {
+	local -r jobs="$(jobs -p)"
+	local -r ns="$(ip netns list|grep $PEER_NS)"
+
+	[ -n "${jobs}" ] && kill -1 ${jobs} 2>/dev/null
+	[ -n "$ns" ] && ip netns del $ns 2>/dev/null
+}
+trap cleanup EXIT
+
+cfg_veth() {
+	ip netns add "${PEER_NS}"
+	ip -netns "${PEER_NS}" link set lo up
+	ip link add type veth
+	ip link set dev veth0 up
+	ip addr add dev veth0 192.168.1.2/24
+	ip addr add dev veth0 2001:db8::2/64 nodad
+
+	ip link set dev veth1 netns "${PEER_NS}"
+	ip -netns "${PEER_NS}" addr add dev veth1 192.168.1.1/24
+	ip -netns "${PEER_NS}" addr add dev veth1 2001:db8::1/64 nodad
+	ip -netns "${PEER_NS}" link set dev veth1 up
+	ip -n "${PEER_NS}" link set veth1 xdp object ../bpf/xdp_dummy.o section xdp_dummy
+}
+
+run_one() {
+	# use 'rx' as separator between sender args and receiver args
+	local -r all="$@"
+	local -r tx_args=${all%rx*}
+	local -r rx_args=${all#*rx}
+
+	cfg_veth
+
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} && \
+		echo "ok" || \
+		echo "failed" &
+
+	# Hack: let bg programs complete the startup
+	sleep 0.1
+	./udpgso_bench_tx ${tx_args}
+	ret=$?
+	wait $(jobs -p)
+	return $ret
+}
+
+run_test() {
+	local -r args=$@
+
+	printf " %-40s" "$1"
+	./in_netns.sh $0 __subprocess $2 rx -G -r $3
+}
+
+run_one_nat() {
+	# use 'rx' as separator between sender args and receiver args
+	local addr1 addr2 pid family="" ipt_cmd=ip6tables
+	local -r all="$@"
+	local -r tx_args=${all%rx*}
+	local -r rx_args=${all#*rx}
+
+	if [[ ${tx_args} = *-4* ]]; then
+		ipt_cmd=iptables
+		family=-4
+		addr1=192.168.1.1
+		addr2=192.168.1.3/24
+	else
+		addr1=2001:db8::1
+		addr2="2001:db8::3/64 nodad"
+	fi
+
+	cfg_veth
+	ip -netns "${PEER_NS}" addr add dev veth1 ${addr2}
+
+	# fool the GRO engine changing the destination address ...
+	ip netns exec "${PEER_NS}" $ipt_cmd -t nat -I PREROUTING -d ${addr1} -j DNAT --to-destination ${addr2%/*}
+
+	# ... so that GRO will match the UDP_GRO enabled socket, but packets
+	# will land on the 'plain' one
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -G ${family} -b ${addr1} -n 0 &
+	pid=$!
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${family} -b ${addr2%/*} ${rx_args} && \
+		echo "ok" || \
+		echo "failed"&
+
+	sleep 0.1
+	./udpgso_bench_tx ${tx_args}
+	ret=$?
+	kill -INT $pid
+	wait $(jobs -p)
+	return $ret
+}
+
+run_one_2sock() {
+	# use 'rx' as separator between sender args and receiver args
+	local -r all="$@"
+	local -r tx_args=${all%rx*}
+	local -r rx_args=${all#*rx}
+
+	cfg_veth
+
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 1000 -R 10 ${rx_args} -p 12345 &
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -C 2000 -R 10 ${rx_args} && \
+		echo "ok" || \
+		echo "failed" &
+
+	# Hack: let bg programs complete the startup
+	sleep 0.1
+	./udpgso_bench_tx ${tx_args} -p 12345
+	sleep 0.1
+	# first UDP GSO socket should be closed at this point
+	./udpgso_bench_tx ${tx_args}
+	ret=$?
+	wait $(jobs -p)
+	return $ret
+}
+
+run_nat_test() {
+	local -r args=$@
+
+	printf " %-40s" "$1"
+	./in_netns.sh $0 __subprocess_nat $2 rx -r $3
+}
+
+run_2sock_test() {
+	local -r args=$@
+
+	printf " %-40s" "$1"
+	./in_netns.sh $0 __subprocess_2sock $2 rx -G -r $3
+}
+
+run_all() {
+	local -r core_args="-l 4"
+	local -r ipv4_args="${core_args} -4 -D 192.168.1.1"
+	local -r ipv6_args="${core_args} -6 -D 2001:db8::1"
+	ret=0
+
+	echo "ipv4"
+	run_test "no GRO" "${ipv4_args} -M 10 -s 1400" "-4 -n 10 -l 1400"
+	check_err $?
+
+	# explicitly check we are not receiving UDP_SEGMENT cmsg (-S -1)
+	# when GRO does not take place
+	run_test "no GRO chk cmsg" "${ipv4_args} -M 10 -s 1400" "-4 -n 10 -l 1400 -S -1"
+	check_err $?
+
+	# the GSO packets are aggregated because:
+	# * veth schedule napi after each xmit
+	# * segmentation happens in BH context, veth napi poll is delayed after
+	#   the transmission of the last segment
+	run_test "GRO" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720"
+	check_err $?
+	run_test "GRO chk cmsg" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720 -S 1472"
+	check_err $?
+	run_test "GRO with custom segment size" "${ipv4_args} -M 1 -s 14720 -S 500 " "-4 -n 1 -l 14720"
+	check_err $?
+	run_test "GRO with custom segment size cmsg" "${ipv4_args} -M 1 -s 14720 -S 500 " "-4 -n 1 -l 14720 -S 500"
+	check_err $?
+
+	run_nat_test "bad GRO lookup" "${ipv4_args} -M 1 -s 14720 -S 0" "-n 10 -l 1472"
+	check_err $?
+	run_2sock_test "multiple GRO socks" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720 -S 1472"
+	check_err $?
+
+	echo "ipv6"
+	run_test "no GRO" "${ipv6_args} -M 10 -s 1400" "-n 10 -l 1400"
+	check_err $?
+	run_test "no GRO chk cmsg" "${ipv6_args} -M 10 -s 1400" "-n 10 -l 1400 -S -1"
+	check_err $?
+	run_test "GRO" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 1 -l 14520"
+	check_err $?
+	run_test "GRO chk cmsg" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 1 -l 14520 -S 1452"
+	check_err $?
+	run_test "GRO with custom segment size" "${ipv6_args} -M 1 -s 14520 -S 500" "-n 1 -l 14520"
+	check_err $?
+	run_test "GRO with custom segment size cmsg" "${ipv6_args} -M 1 -s 14520 -S 500" "-n 1 -l 14520 -S 500"
+	check_err $?
+
+	run_nat_test "bad GRO lookup" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 10 -l 1452"
+	check_err $?
+	run_2sock_test "multiple GRO socks" "${ipv6_args} -M 1 -s 14520 -S 0 " "-n 1 -l 14520 -S 1452"
+	check_err $?
+	return $ret
+}
+
+if [ ! -f ../bpf/xdp_dummy.o ]; then
+	echo "Missing xdp_dummy helper. Build bpf selftest first"
+	exit -1
+fi
+
+if [[ $# -eq 0 ]]; then
+	run_all
+elif [[ $1 == "__subprocess" ]]; then
+	shift
+	run_one $@
+elif [[ $1 == "__subprocess_nat" ]]; then
+	shift
+	run_one_nat $@
+elif [[ $1 == "__subprocess_2sock" ]]; then
+	shift
+	run_one_2sock $@
+fi
+
+exit $?
diff --git a/tools/testing/selftests/net/udpgro_bench.sh b/tools/testing/selftests/net/udpgro_bench.sh
new file mode 100755
index 000000000..820bc50f6
--- /dev/null
+++ b/tools/testing/selftests/net/udpgro_bench.sh
@@ -0,0 +1,95 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run a series of udpgro benchmarks
+
+readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+
+cleanup() {
+	local -r jobs="$(jobs -p)"
+	local -r ns="$(ip netns list|grep $PEER_NS)"
+
+	[ -n "${jobs}" ] && kill -INT ${jobs} 2>/dev/null
+	[ -n "$ns" ] && ip netns del $ns 2>/dev/null
+}
+trap cleanup EXIT
+
+run_one() {
+	# use 'rx' as separator between sender args and receiver args
+	local -r all="$@"
+	local -r tx_args=${all%rx*}
+	local rx_args=${all#*rx}
+
+	[[ "${tx_args}" == *"-4"* ]] && rx_args="${rx_args} -4"
+
+	ip netns add "${PEER_NS}"
+	ip -netns "${PEER_NS}" link set lo up
+	ip link add type veth
+	ip link set dev veth0 up
+	ip addr add dev veth0 192.168.1.2/24
+	ip addr add dev veth0 2001:db8::2/64 nodad
+
+	ip link set dev veth1 netns "${PEER_NS}"
+	ip -netns "${PEER_NS}" addr add dev veth1 192.168.1.1/24
+	ip -netns "${PEER_NS}" addr add dev veth1 2001:db8::1/64 nodad
+	ip -netns "${PEER_NS}" link set dev veth1 up
+
+	ip -n "${PEER_NS}" link set veth1 xdp object ../bpf/xdp_dummy.o section xdp_dummy
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} -r &
+	ip netns exec "${PEER_NS}" ./udpgso_bench_rx -t ${rx_args} -r &
+
+	# Hack: let bg programs complete the startup
+	sleep 0.1
+	./udpgso_bench_tx ${tx_args}
+}
+
+run_in_netns() {
+	local -r args=$@
+
+	./in_netns.sh $0 __subprocess ${args}
+}
+
+run_udp() {
+	local -r args=$@
+
+	echo "udp gso - over veth touching data"
+	run_in_netns ${args} -S 0 rx
+
+	echo "udp gso and gro - over veth touching data"
+	run_in_netns ${args} -S 0 rx -G
+}
+
+run_tcp() {
+	local -r args=$@
+
+	echo "tcp - over veth touching data"
+	run_in_netns ${args} -t rx
+}
+
+run_all() {
+	local -r core_args="-l 4"
+	local -r ipv4_args="${core_args} -4 -D 192.168.1.1"
+	local -r ipv6_args="${core_args} -6 -D 2001:db8::1"
+
+	echo "ipv4"
+	run_tcp "${ipv4_args}"
+	run_udp "${ipv4_args}"
+
+	echo "ipv6"
+	run_tcp "${ipv4_args}"
+	run_udp "${ipv6_args}"
+}
+
+if [ ! -f ../bpf/xdp_dummy.o ]; then
+	echo "Missing xdp_dummy helper. Build bpf selftest first"
+	exit -1
+fi
+
+if [[ $# -eq 0 ]]; then
+	run_all
+elif [[ $1 == "__subprocess" ]]; then
+	shift
+	run_one $@
+else
+	run_in_netns $@
+fi
diff --git a/tools/testing/selftests/net/udpgso.c b/tools/testing/selftests/net/udpgso.c
new file mode 100644
index 000000000..7badaf215
--- /dev/null
+++ b/tools/testing/selftests/net/udpgso.c
@@ -0,0 +1,685 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <stddef.h>
+#include <arpa/inet.h>
+#include <error.h>
+#include <errno.h>
+#include <net/if.h>
+#include <linux/in.h>
+#include <linux/netlink.h>
+#include <linux/rtnetlink.h>
+#include <netinet/if_ether.h>
+#include <netinet/ip.h>
+#include <netinet/ip6.h>
+#include <netinet/udp.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#ifndef ETH_MAX_MTU
+#define ETH_MAX_MTU	0xFFFFU
+#endif
+
+#ifndef UDP_SEGMENT
+#define UDP_SEGMENT		103
+#endif
+
+#ifndef UDP_MAX_SEGMENTS
+#define UDP_MAX_SEGMENTS	(1 << 6UL)
+#endif
+
+#define CONST_MTU_TEST	1500
+
+#define CONST_HDRLEN_V4		(sizeof(struct iphdr) + sizeof(struct udphdr))
+#define CONST_HDRLEN_V6		(sizeof(struct ip6_hdr) + sizeof(struct udphdr))
+
+#define CONST_MSS_V4		(CONST_MTU_TEST - CONST_HDRLEN_V4)
+#define CONST_MSS_V6		(CONST_MTU_TEST - CONST_HDRLEN_V6)
+
+#define CONST_MAX_SEGS_V4	(ETH_MAX_MTU / CONST_MSS_V4)
+#define CONST_MAX_SEGS_V6	(ETH_MAX_MTU / CONST_MSS_V6)
+
+static bool		cfg_do_ipv4;
+static bool		cfg_do_ipv6;
+static bool		cfg_do_connected;
+static bool		cfg_do_connectionless;
+static bool		cfg_do_msgmore;
+static bool		cfg_do_setsockopt;
+static int		cfg_specific_test_id = -1;
+
+static const char	cfg_ifname[] = "lo";
+static unsigned short	cfg_port = 9000;
+
+static char buf[ETH_MAX_MTU];
+
+struct testcase {
+	int tlen;		/* send() buffer size, may exceed mss */
+	bool tfail;		/* send() call is expected to fail */
+	int gso_len;		/* mss after applying gso */
+	int r_num_mss;		/* recv(): number of calls of full mss */
+	int r_len_last;		/* recv(): size of last non-mss dgram, if any */
+};
+
+const struct in6_addr addr6 = IN6ADDR_LOOPBACK_INIT;
+const struct in_addr addr4 = { .s_addr = __constant_htonl(INADDR_LOOPBACK + 2) };
+
+struct testcase testcases_v4[] = {
+	{
+		/* no GSO: send a single byte */
+		.tlen = 1,
+		.r_len_last = 1,
+	},
+	{
+		/* no GSO: send a single MSS */
+		.tlen = CONST_MSS_V4,
+		.r_num_mss = 1,
+	},
+	{
+		/* no GSO: send a single MSS + 1B: fail */
+		.tlen = CONST_MSS_V4 + 1,
+		.tfail = true,
+	},
+	{
+		/* send a single MSS: will fall back to no GSO */
+		.tlen = CONST_MSS_V4,
+		.gso_len = CONST_MSS_V4,
+		.r_num_mss = 1,
+	},
+	{
+		/* send a single MSS + 1B */
+		.tlen = CONST_MSS_V4 + 1,
+		.gso_len = CONST_MSS_V4,
+		.r_num_mss = 1,
+		.r_len_last = 1,
+	},
+	{
+		/* send exactly 2 MSS */
+		.tlen = CONST_MSS_V4 * 2,
+		.gso_len = CONST_MSS_V4,
+		.r_num_mss = 2,
+	},
+	{
+		/* send 2 MSS + 1B */
+		.tlen = (CONST_MSS_V4 * 2) + 1,
+		.gso_len = CONST_MSS_V4,
+		.r_num_mss = 2,
+		.r_len_last = 1,
+	},
+	{
+		/* send MAX segs */
+		.tlen = (ETH_MAX_MTU / CONST_MSS_V4) * CONST_MSS_V4,
+		.gso_len = CONST_MSS_V4,
+		.r_num_mss = (ETH_MAX_MTU / CONST_MSS_V4),
+	},
+
+	{
+		/* send MAX bytes */
+		.tlen = ETH_MAX_MTU - CONST_HDRLEN_V4,
+		.gso_len = CONST_MSS_V4,
+		.r_num_mss = CONST_MAX_SEGS_V4,
+		.r_len_last = ETH_MAX_MTU - CONST_HDRLEN_V4 -
+			      (CONST_MAX_SEGS_V4 * CONST_MSS_V4),
+	},
+	{
+		/* send MAX + 1: fail */
+		.tlen = ETH_MAX_MTU - CONST_HDRLEN_V4 + 1,
+		.gso_len = CONST_MSS_V4,
+		.tfail = true,
+	},
+	{
+		/* send a single 1B MSS: will fall back to no GSO */
+		.tlen = 1,
+		.gso_len = 1,
+		.r_num_mss = 1,
+	},
+	{
+		/* send 2 1B segments */
+		.tlen = 2,
+		.gso_len = 1,
+		.r_num_mss = 2,
+	},
+	{
+		/* send 2B + 2B + 1B segments */
+		.tlen = 5,
+		.gso_len = 2,
+		.r_num_mss = 2,
+		.r_len_last = 1,
+	},
+	{
+		/* send max number of min sized segments */
+		.tlen = UDP_MAX_SEGMENTS,
+		.gso_len = 1,
+		.r_num_mss = UDP_MAX_SEGMENTS,
+	},
+	{
+		/* send max number + 1 of min sized segments: fail */
+		.tlen = UDP_MAX_SEGMENTS + 1,
+		.gso_len = 1,
+		.tfail = true,
+	},
+	{
+		/* EOL */
+	}
+};
+
+#ifndef IP6_MAX_MTU
+#define IP6_MAX_MTU	(ETH_MAX_MTU + sizeof(struct ip6_hdr))
+#endif
+
+struct testcase testcases_v6[] = {
+	{
+		/* no GSO: send a single byte */
+		.tlen = 1,
+		.r_len_last = 1,
+	},
+	{
+		/* no GSO: send a single MSS */
+		.tlen = CONST_MSS_V6,
+		.r_num_mss = 1,
+	},
+	{
+		/* no GSO: send a single MSS + 1B: fail */
+		.tlen = CONST_MSS_V6 + 1,
+		.tfail = true,
+	},
+	{
+		/* send a single MSS: will fall back to no GSO */
+		.tlen = CONST_MSS_V6,
+		.gso_len = CONST_MSS_V6,
+		.r_num_mss = 1,
+	},
+	{
+		/* send a single MSS + 1B */
+		.tlen = CONST_MSS_V6 + 1,
+		.gso_len = CONST_MSS_V6,
+		.r_num_mss = 1,
+		.r_len_last = 1,
+	},
+	{
+		/* send exactly 2 MSS */
+		.tlen = CONST_MSS_V6 * 2,
+		.gso_len = CONST_MSS_V6,
+		.r_num_mss = 2,
+	},
+	{
+		/* send 2 MSS + 1B */
+		.tlen = (CONST_MSS_V6 * 2) + 1,
+		.gso_len = CONST_MSS_V6,
+		.r_num_mss = 2,
+		.r_len_last = 1,
+	},
+	{
+		/* send MAX segs */
+		.tlen = (IP6_MAX_MTU / CONST_MSS_V6) * CONST_MSS_V6,
+		.gso_len = CONST_MSS_V6,
+		.r_num_mss = (IP6_MAX_MTU / CONST_MSS_V6),
+	},
+
+	{
+		/* send MAX bytes */
+		.tlen = IP6_MAX_MTU - CONST_HDRLEN_V6,
+		.gso_len = CONST_MSS_V6,
+		.r_num_mss = CONST_MAX_SEGS_V6,
+		.r_len_last = IP6_MAX_MTU - CONST_HDRLEN_V6 -
+			      (CONST_MAX_SEGS_V6 * CONST_MSS_V6),
+	},
+	{
+		/* send MAX + 1: fail */
+		.tlen = IP6_MAX_MTU - CONST_HDRLEN_V6 + 1,
+		.gso_len = CONST_MSS_V6,
+		.tfail = true,
+	},
+	{
+		/* send a single 1B MSS: will fall back to no GSO */
+		.tlen = 1,
+		.gso_len = 1,
+		.r_num_mss = 1,
+	},
+	{
+		/* send 2 1B segments */
+		.tlen = 2,
+		.gso_len = 1,
+		.r_num_mss = 2,
+	},
+	{
+		/* send 2B + 2B + 1B segments */
+		.tlen = 5,
+		.gso_len = 2,
+		.r_num_mss = 2,
+		.r_len_last = 1,
+	},
+	{
+		/* send max number of min sized segments */
+		.tlen = UDP_MAX_SEGMENTS,
+		.gso_len = 1,
+		.r_num_mss = UDP_MAX_SEGMENTS,
+	},
+	{
+		/* send max number + 1 of min sized segments: fail */
+		.tlen = UDP_MAX_SEGMENTS + 1,
+		.gso_len = 1,
+		.tfail = true,
+	},
+	{
+		/* EOL */
+	}
+};
+
+static unsigned int get_device_mtu(int fd, const char *ifname)
+{
+	struct ifreq ifr;
+
+	memset(&ifr, 0, sizeof(ifr));
+
+	strcpy(ifr.ifr_name, ifname);
+
+	if (ioctl(fd, SIOCGIFMTU, &ifr))
+		error(1, errno, "ioctl get mtu");
+
+	return ifr.ifr_mtu;
+}
+
+static void __set_device_mtu(int fd, const char *ifname, unsigned int mtu)
+{
+	struct ifreq ifr;
+
+	memset(&ifr, 0, sizeof(ifr));
+
+	ifr.ifr_mtu = mtu;
+	strcpy(ifr.ifr_name, ifname);
+
+	if (ioctl(fd, SIOCSIFMTU, &ifr))
+		error(1, errno, "ioctl set mtu");
+}
+
+static void set_device_mtu(int fd, int mtu)
+{
+	int val;
+
+	val = get_device_mtu(fd, cfg_ifname);
+	fprintf(stderr, "device mtu (orig): %u\n", val);
+
+	__set_device_mtu(fd, cfg_ifname, mtu);
+	val = get_device_mtu(fd, cfg_ifname);
+	if (val != mtu)
+		error(1, 0, "unable to set device mtu to %u\n", val);
+
+	fprintf(stderr, "device mtu (test): %u\n", val);
+}
+
+static void set_pmtu_discover(int fd, bool is_ipv4)
+{
+	int level, name, val;
+
+	if (is_ipv4) {
+		level	= SOL_IP;
+		name	= IP_MTU_DISCOVER;
+		val	= IP_PMTUDISC_DO;
+	} else {
+		level	= SOL_IPV6;
+		name	= IPV6_MTU_DISCOVER;
+		val	= IPV6_PMTUDISC_DO;
+	}
+
+	if (setsockopt(fd, level, name, &val, sizeof(val)))
+		error(1, errno, "setsockopt path mtu");
+}
+
+static unsigned int get_path_mtu(int fd, bool is_ipv4)
+{
+	socklen_t vallen;
+	unsigned int mtu;
+	int ret;
+
+	vallen = sizeof(mtu);
+	if (is_ipv4)
+		ret = getsockopt(fd, SOL_IP, IP_MTU, &mtu, &vallen);
+	else
+		ret = getsockopt(fd, SOL_IPV6, IPV6_MTU, &mtu, &vallen);
+
+	if (ret)
+		error(1, errno, "getsockopt mtu");
+
+
+	fprintf(stderr, "path mtu (read):  %u\n", mtu);
+	return mtu;
+}
+
+/* very wordy version of system("ip route add dev lo mtu 1500 127.0.0.3/32") */
+static void set_route_mtu(int mtu, bool is_ipv4)
+{
+	struct sockaddr_nl nladdr = { .nl_family = AF_NETLINK };
+	struct nlmsghdr *nh;
+	struct rtattr *rta;
+	struct rtmsg *rt;
+	char data[NLMSG_ALIGN(sizeof(*nh)) +
+		  NLMSG_ALIGN(sizeof(*rt)) +
+		  NLMSG_ALIGN(RTA_LENGTH(sizeof(addr6))) +
+		  NLMSG_ALIGN(RTA_LENGTH(sizeof(int))) +
+		  NLMSG_ALIGN(RTA_LENGTH(0) + RTA_LENGTH(sizeof(int)))];
+	int fd, ret, alen, off = 0;
+
+	alen = is_ipv4 ? sizeof(addr4) : sizeof(addr6);
+
+	fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE);
+	if (fd == -1)
+		error(1, errno, "socket netlink");
+
+	memset(data, 0, sizeof(data));
+
+	nh = (void *)data;
+	nh->nlmsg_type = RTM_NEWROUTE;
+	nh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE;
+	off += NLMSG_ALIGN(sizeof(*nh));
+
+	rt = (void *)(data + off);
+	rt->rtm_family = is_ipv4 ? AF_INET : AF_INET6;
+	rt->rtm_table = RT_TABLE_MAIN;
+	rt->rtm_dst_len = alen << 3;
+	rt->rtm_protocol = RTPROT_BOOT;
+	rt->rtm_scope = RT_SCOPE_UNIVERSE;
+	rt->rtm_type = RTN_UNICAST;
+	off += NLMSG_ALIGN(sizeof(*rt));
+
+	rta = (void *)(data + off);
+	rta->rta_type = RTA_DST;
+	rta->rta_len = RTA_LENGTH(alen);
+	if (is_ipv4)
+		memcpy(RTA_DATA(rta), &addr4, alen);
+	else
+		memcpy(RTA_DATA(rta), &addr6, alen);
+	off += NLMSG_ALIGN(rta->rta_len);
+
+	rta = (void *)(data + off);
+	rta->rta_type = RTA_OIF;
+	rta->rta_len = RTA_LENGTH(sizeof(int));
+	*((int *)(RTA_DATA(rta))) = 1; //if_nametoindex("lo");
+	off += NLMSG_ALIGN(rta->rta_len);
+
+	/* MTU is a subtype in a metrics type */
+	rta = (void *)(data + off);
+	rta->rta_type = RTA_METRICS;
+	rta->rta_len = RTA_LENGTH(0) + RTA_LENGTH(sizeof(int));
+	off += NLMSG_ALIGN(rta->rta_len);
+
+	/* now fill MTU subtype. Note that it fits within above rta_len */
+	rta = (void *)(((char *) rta) + RTA_LENGTH(0));
+	rta->rta_type = RTAX_MTU;
+	rta->rta_len = RTA_LENGTH(sizeof(int));
+	*((int *)(RTA_DATA(rta))) = mtu;
+
+	nh->nlmsg_len = off;
+
+	ret = sendto(fd, data, off, 0, (void *)&nladdr, sizeof(nladdr));
+	if (ret != off)
+		error(1, errno, "send netlink: %uB != %uB\n", ret, off);
+
+	if (close(fd))
+		error(1, errno, "close netlink");
+
+	fprintf(stderr, "route mtu (test): %u\n", mtu);
+}
+
+static bool __send_one(int fd, struct msghdr *msg, int flags)
+{
+	int ret;
+
+	ret = sendmsg(fd, msg, flags);
+	if (ret == -1 &&
+	    (errno == EMSGSIZE || errno == ENOMEM || errno == EINVAL))
+		return false;
+	if (ret == -1)
+		error(1, errno, "sendmsg");
+	if (ret != msg->msg_iov->iov_len)
+		error(1, 0, "sendto: %d != %llu", ret,
+			(unsigned long long)msg->msg_iov->iov_len);
+	if (msg->msg_flags)
+		error(1, 0, "sendmsg: return flags 0x%x\n", msg->msg_flags);
+
+	return true;
+}
+
+static bool send_one(int fd, int len, int gso_len,
+		     struct sockaddr *addr, socklen_t alen)
+{
+	char control[CMSG_SPACE(sizeof(uint16_t))] = {0};
+	struct msghdr msg = {0};
+	struct iovec iov = {0};
+	struct cmsghdr *cm;
+
+	iov.iov_base = buf;
+	iov.iov_len = len;
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	msg.msg_name = addr;
+	msg.msg_namelen = alen;
+
+	if (gso_len && !cfg_do_setsockopt) {
+		msg.msg_control = control;
+		msg.msg_controllen = sizeof(control);
+
+		cm = CMSG_FIRSTHDR(&msg);
+		cm->cmsg_level = SOL_UDP;
+		cm->cmsg_type = UDP_SEGMENT;
+		cm->cmsg_len = CMSG_LEN(sizeof(uint16_t));
+		*((uint16_t *) CMSG_DATA(cm)) = gso_len;
+	}
+
+	/* If MSG_MORE, send 1 byte followed by remainder */
+	if (cfg_do_msgmore && len > 1) {
+		iov.iov_len = 1;
+		if (!__send_one(fd, &msg, MSG_MORE))
+			error(1, 0, "send 1B failed");
+
+		iov.iov_base++;
+		iov.iov_len = len - 1;
+	}
+
+	return __send_one(fd, &msg, 0);
+}
+
+static int recv_one(int fd, int flags)
+{
+	int ret;
+
+	ret = recv(fd, buf, sizeof(buf), flags);
+	if (ret == -1 && errno == EAGAIN && (flags & MSG_DONTWAIT))
+		return 0;
+	if (ret == -1)
+		error(1, errno, "recv");
+
+	return ret;
+}
+
+static void run_one(struct testcase *test, int fdt, int fdr,
+		    struct sockaddr *addr, socklen_t alen)
+{
+	int i, ret, val, mss;
+	bool sent;
+
+	fprintf(stderr, "ipv%d tx:%d gso:%d %s\n",
+			addr->sa_family == AF_INET ? 4 : 6,
+			test->tlen, test->gso_len,
+			test->tfail ? "(fail)" : "");
+
+	val = test->gso_len;
+	if (cfg_do_setsockopt) {
+		if (setsockopt(fdt, SOL_UDP, UDP_SEGMENT, &val, sizeof(val)))
+			error(1, errno, "setsockopt udp segment");
+	}
+
+	sent = send_one(fdt, test->tlen, test->gso_len, addr, alen);
+	if (sent && test->tfail)
+		error(1, 0, "send succeeded while expecting failure");
+	if (!sent && !test->tfail)
+		error(1, 0, "send failed while expecting success");
+	if (!sent)
+		return;
+
+	if (test->gso_len)
+		mss = test->gso_len;
+	else
+		mss = addr->sa_family == AF_INET ? CONST_MSS_V4 : CONST_MSS_V6;
+
+
+	/* Recv all full MSS datagrams */
+	for (i = 0; i < test->r_num_mss; i++) {
+		ret = recv_one(fdr, 0);
+		if (ret != mss)
+			error(1, 0, "recv.%d: %d != %d", i, ret, mss);
+	}
+
+	/* Recv the non-full last datagram, if tlen was not a multiple of mss */
+	if (test->r_len_last) {
+		ret = recv_one(fdr, 0);
+		if (ret != test->r_len_last)
+			error(1, 0, "recv.%d: %d != %d (last)",
+			      i, ret, test->r_len_last);
+	}
+
+	/* Verify received all data */
+	ret = recv_one(fdr, MSG_DONTWAIT);
+	if (ret)
+		error(1, 0, "recv: unexpected datagram");
+}
+
+static void run_all(int fdt, int fdr, struct sockaddr *addr, socklen_t alen)
+{
+	struct testcase *tests, *test;
+
+	tests = addr->sa_family == AF_INET ? testcases_v4 : testcases_v6;
+
+	for (test = tests; test->tlen; test++) {
+		/* if a specific test is given, then skip all others */
+		if (cfg_specific_test_id == -1 ||
+		    cfg_specific_test_id == test - tests)
+			run_one(test, fdt, fdr, addr, alen);
+	}
+}
+
+static void run_test(struct sockaddr *addr, socklen_t alen)
+{
+	struct timeval tv = { .tv_usec = 100 * 1000 };
+	int fdr, fdt, val;
+
+	fdr = socket(addr->sa_family, SOCK_DGRAM, 0);
+	if (fdr == -1)
+		error(1, errno, "socket r");
+
+	if (bind(fdr, addr, alen))
+		error(1, errno, "bind");
+
+	/* Have tests fail quickly instead of hang */
+	if (setsockopt(fdr, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)))
+		error(1, errno, "setsockopt rcv timeout");
+
+	fdt = socket(addr->sa_family, SOCK_DGRAM, 0);
+	if (fdt == -1)
+		error(1, errno, "socket t");
+
+	/* Do not fragment these datagrams: only succeed if GSO works */
+	set_pmtu_discover(fdt, addr->sa_family == AF_INET);
+
+	if (cfg_do_connectionless) {
+		set_device_mtu(fdt, CONST_MTU_TEST);
+		run_all(fdt, fdr, addr, alen);
+	}
+
+	if (cfg_do_connected) {
+		set_device_mtu(fdt, CONST_MTU_TEST + 100);
+		set_route_mtu(CONST_MTU_TEST, addr->sa_family == AF_INET);
+
+		if (connect(fdt, addr, alen))
+			error(1, errno, "connect");
+
+		val = get_path_mtu(fdt, addr->sa_family == AF_INET);
+		if (val != CONST_MTU_TEST)
+			error(1, 0, "bad path mtu %u\n", val);
+
+		run_all(fdt, fdr, addr, 0 /* use connected addr */);
+	}
+
+	if (close(fdt))
+		error(1, errno, "close t");
+	if (close(fdr))
+		error(1, errno, "close r");
+}
+
+static void run_test_v4(void)
+{
+	struct sockaddr_in addr = {0};
+
+	addr.sin_family = AF_INET;
+	addr.sin_port = htons(cfg_port);
+	addr.sin_addr = addr4;
+
+	run_test((void *)&addr, sizeof(addr));
+}
+
+static void run_test_v6(void)
+{
+	struct sockaddr_in6 addr = {0};
+
+	addr.sin6_family = AF_INET6;
+	addr.sin6_port = htons(cfg_port);
+	addr.sin6_addr = addr6;
+
+	run_test((void *)&addr, sizeof(addr));
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c;
+
+	while ((c = getopt(argc, argv, "46cCmst:")) != -1) {
+		switch (c) {
+		case '4':
+			cfg_do_ipv4 = true;
+			break;
+		case '6':
+			cfg_do_ipv6 = true;
+			break;
+		case 'c':
+			cfg_do_connected = true;
+			break;
+		case 'C':
+			cfg_do_connectionless = true;
+			break;
+		case 'm':
+			cfg_do_msgmore = true;
+			break;
+		case 's':
+			cfg_do_setsockopt = true;
+			break;
+		case 't':
+			cfg_specific_test_id = strtoul(optarg, NULL, 0);
+			break;
+		default:
+			error(1, 0, "%s: parse error", argv[0]);
+		}
+	}
+}
+
+int main(int argc, char **argv)
+{
+	parse_opts(argc, argv);
+
+	if (cfg_do_ipv4)
+		run_test_v4();
+	if (cfg_do_ipv6)
+		run_test_v6();
+
+	fprintf(stderr, "OK\n");
+	return 0;
+}
diff --git a/tools/testing/selftests/net/udpgso.sh b/tools/testing/selftests/net/udpgso.sh
new file mode 100755
index 000000000..fec24f584
--- /dev/null
+++ b/tools/testing/selftests/net/udpgso.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run a series of udpgso regression tests
+
+echo "ipv4 cmsg"
+./in_netns.sh ./udpgso -4 -C
+
+echo "ipv4 setsockopt"
+./in_netns.sh ./udpgso -4 -C -s
+
+echo "ipv6 cmsg"
+./in_netns.sh ./udpgso -6 -C
+
+echo "ipv6 setsockopt"
+./in_netns.sh ./udpgso -6 -C -s
+
+echo "ipv4 connected"
+./in_netns.sh ./udpgso -4 -c
+
+# blocked on 2nd loopback address
+# echo "ipv6 connected"
+# ./in_netns.sh ./udpgso -6 -c
+
+echo "ipv4 msg_more"
+./in_netns.sh ./udpgso -4 -C -m
+
+echo "ipv6 msg_more"
+./in_netns.sh ./udpgso -6 -C -m
diff --git a/tools/testing/selftests/net/udpgso_bench.sh b/tools/testing/selftests/net/udpgso_bench.sh
new file mode 100755
index 000000000..640bc4345
--- /dev/null
+++ b/tools/testing/selftests/net/udpgso_bench.sh
@@ -0,0 +1,151 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Run a series of udpgso benchmarks
+
+readonly GREEN='\033[0;92m'
+readonly YELLOW='\033[0;33m'
+readonly RED='\033[0;31m'
+readonly NC='\033[0m' # No Color
+readonly TESTPORT=8000
+
+readonly KSFT_PASS=0
+readonly KSFT_FAIL=1
+readonly KSFT_SKIP=4
+
+num_pass=0
+num_err=0
+num_skip=0
+
+kselftest_test_exitcode() {
+	local -r exitcode=$1
+
+	if [[ ${exitcode} -eq ${KSFT_PASS} ]]; then
+		num_pass=$(( $num_pass + 1 ))
+	elif [[ ${exitcode} -eq ${KSFT_SKIP} ]]; then
+		num_skip=$(( $num_skip + 1 ))
+	else
+		num_err=$(( $num_err + 1 ))
+	fi
+}
+
+kselftest_exit() {
+	echo -e "$(basename $0): PASS=${num_pass} SKIP=${num_skip} FAIL=${num_err}"
+
+	if [[ $num_err -ne 0 ]]; then
+		echo -e "$(basename $0): ${RED}FAIL${NC}"
+		exit ${KSFT_FAIL}
+	fi
+
+	if [[ $num_skip -ne 0 ]]; then
+		echo -e "$(basename $0): ${YELLOW}SKIP${NC}"
+		exit ${KSFT_SKIP}
+	fi
+
+	echo -e "$(basename $0): ${GREEN}PASS${NC}"
+	exit ${KSFT_PASS}
+}
+
+wake_children() {
+	local -r jobs="$(jobs -p)"
+
+	if [[ "${jobs}" != "" ]]; then
+		kill -1 ${jobs} 2>/dev/null
+	fi
+}
+trap wake_children EXIT
+
+run_one() {
+	local -r args=$@
+	local nr_socks=0
+	local i=0
+	local -r timeout=10
+
+	./udpgso_bench_rx -p "$TESTPORT" &
+	./udpgso_bench_rx -p "$TESTPORT" -t &
+
+	# Wait for the above test program to get ready to receive connections.
+	while [ "$i" -lt "$timeout" ]; do
+		nr_socks="$(ss -lnHi | grep -c "\*:${TESTPORT}")"
+		[ "$nr_socks" -eq 2 ] && break
+		i=$((i + 1))
+		sleep 1
+	done
+	if [ "$nr_socks" -ne 2 ]; then
+		echo "timed out while waiting for udpgso_bench_rx"
+		exit 1
+	fi
+
+	./udpgso_bench_tx -p "$TESTPORT" ${args}
+}
+
+run_in_netns() {
+	local -r args=$@
+
+	./in_netns.sh $0 __subprocess ${args}
+	kselftest_test_exitcode $?
+}
+
+run_udp() {
+	local -r args=$@
+
+	echo "udp"
+	run_in_netns ${args}
+
+	echo "udp gso"
+	run_in_netns ${args} -S 0
+
+	echo "udp gso zerocopy"
+	run_in_netns ${args} -S 0 -z
+
+	echo "udp gso timestamp"
+	run_in_netns ${args} -S 0 -T
+
+	echo "udp gso zerocopy audit"
+	run_in_netns ${args} -S 0 -z -a
+
+	echo "udp gso timestamp audit"
+	run_in_netns ${args} -S 0 -T -a
+
+	echo "udp gso zerocopy timestamp audit"
+	run_in_netns ${args} -S 0 -T -z -a
+}
+
+run_tcp() {
+	local -r args=$@
+
+	echo "tcp"
+	run_in_netns ${args} -t
+
+	echo "tcp zerocopy"
+	run_in_netns ${args} -t -z
+
+	# excluding for now because test fails intermittently
+	# add -P option to include poll() to reduce possibility of lost messages
+	#echo "tcp zerocopy audit"
+	#run_in_netns ${args} -t -z -P -a
+}
+
+run_all() {
+	local -r core_args="-l 3"
+	local -r ipv4_args="${core_args} -4 -D 127.0.0.1"
+	local -r ipv6_args="${core_args} -6 -D ::1"
+
+	echo "ipv4"
+	run_tcp "${ipv4_args}"
+	run_udp "${ipv4_args}"
+
+	echo "ipv6"
+	run_tcp "${ipv6_args}"
+	run_udp "${ipv6_args}"
+}
+
+if [[ $# -eq 0 ]]; then
+	run_all
+	kselftest_exit
+elif [[ $1 == "__subprocess" ]]; then
+	shift
+	run_one $@
+else
+	run_in_netns $@
+fi
diff --git a/tools/testing/selftests/net/udpgso_bench_rx.c b/tools/testing/selftests/net/udpgso_bench_rx.c
new file mode 100644
index 000000000..f35a924d4
--- /dev/null
+++ b/tools/testing/selftests/net/udpgso_bench_rx.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <error.h>
+#include <errno.h>
+#include <limits.h>
+#include <linux/errqueue.h>
+#include <linux/if_packet.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <net/ethernet.h>
+#include <net/if.h>
+#include <netinet/ip.h>
+#include <netinet/ip6.h>
+#include <netinet/tcp.h>
+#include <netinet/udp.h>
+#include <poll.h>
+#include <sched.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#ifndef UDP_GRO
+#define UDP_GRO		104
+#endif
+
+static int  cfg_port		= 8000;
+static bool cfg_tcp;
+static bool cfg_verify;
+static bool cfg_read_all;
+static bool cfg_gro_segment;
+static int  cfg_family		= PF_INET6;
+static int  cfg_alen 		= sizeof(struct sockaddr_in6);
+static int  cfg_expected_pkt_nr;
+static int  cfg_expected_pkt_len;
+static int  cfg_expected_gso_size;
+static int  cfg_connect_timeout_ms;
+static int  cfg_rcv_timeout_ms;
+static struct sockaddr_storage cfg_bind_addr;
+
+static bool interrupted;
+static unsigned long packets, bytes;
+
+static void sigint_handler(int signum)
+{
+	if (signum == SIGINT)
+		interrupted = true;
+}
+
+static void setup_sockaddr(int domain, const char *str_addr, void *sockaddr)
+{
+	struct sockaddr_in6 *addr6 = (void *) sockaddr;
+	struct sockaddr_in *addr4 = (void *) sockaddr;
+
+	switch (domain) {
+	case PF_INET:
+		addr4->sin_family = AF_INET;
+		addr4->sin_port = htons(cfg_port);
+		if (inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1)
+			error(1, 0, "ipv4 parse error: %s", str_addr);
+		break;
+	case PF_INET6:
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_port = htons(cfg_port);
+		if (inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1)
+			error(1, 0, "ipv6 parse error: %s", str_addr);
+		break;
+	default:
+		error(1, 0, "illegal domain");
+	}
+}
+
+static unsigned long gettimeofday_ms(void)
+{
+	struct timeval tv;
+
+	gettimeofday(&tv, NULL);
+	return (tv.tv_sec * 1000) + (tv.tv_usec / 1000);
+}
+
+static void do_poll(int fd, int timeout_ms)
+{
+	struct pollfd pfd;
+	int ret;
+
+	pfd.events = POLLIN;
+	pfd.revents = 0;
+	pfd.fd = fd;
+
+	do {
+		ret = poll(&pfd, 1, 10);
+		if (interrupted)
+			break;
+		if (ret == -1)
+			error(1, errno, "poll");
+		if (ret == 0) {
+			if (!timeout_ms)
+				continue;
+
+			timeout_ms -= 10;
+			if (timeout_ms <= 0) {
+				interrupted = true;
+				break;
+			}
+
+			/* no events and more time to wait, do poll again */
+			continue;
+		}
+		if (pfd.revents != POLLIN)
+			error(1, errno, "poll: 0x%x expected 0x%x\n",
+					pfd.revents, POLLIN);
+	} while (!ret);
+}
+
+static int do_socket(bool do_tcp)
+{
+	int fd, val;
+
+	fd = socket(cfg_family, cfg_tcp ? SOCK_STREAM : SOCK_DGRAM, 0);
+	if (fd == -1)
+		error(1, errno, "socket");
+
+	val = 1 << 21;
+	if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF, &val, sizeof(val)))
+		error(1, errno, "setsockopt rcvbuf");
+	val = 1;
+	if (setsockopt(fd, SOL_SOCKET, SO_REUSEPORT, &val, sizeof(val)))
+		error(1, errno, "setsockopt reuseport");
+
+	if (bind(fd, (void *)&cfg_bind_addr, cfg_alen))
+		error(1, errno, "bind");
+
+	if (do_tcp) {
+		int accept_fd = fd;
+
+		if (listen(accept_fd, 1))
+			error(1, errno, "listen");
+
+		do_poll(accept_fd, cfg_connect_timeout_ms);
+		if (interrupted)
+			exit(0);
+
+		fd = accept(accept_fd, NULL, NULL);
+		if (fd == -1)
+			error(1, errno, "accept");
+		if (close(accept_fd))
+			error(1, errno, "close accept fd");
+	}
+
+	return fd;
+}
+
+/* Flush all outstanding bytes for the tcp receive queue */
+static void do_flush_tcp(int fd)
+{
+	int ret;
+
+	while (true) {
+		/* MSG_TRUNC flushes up to len bytes */
+		ret = recv(fd, NULL, 1 << 21, MSG_TRUNC | MSG_DONTWAIT);
+		if (ret == -1 && errno == EAGAIN)
+			return;
+		if (ret == -1)
+			error(1, errno, "flush");
+		if (ret == 0) {
+			/* client detached */
+			exit(0);
+		}
+
+		packets++;
+		bytes += ret;
+	}
+
+}
+
+static char sanitized_char(char val)
+{
+	return (val >= 'a' && val <= 'z') ? val : '.';
+}
+
+static void do_verify_udp(const char *data, int len)
+{
+	char cur = data[0];
+	int i;
+
+	/* verify contents */
+	if (cur < 'a' || cur > 'z')
+		error(1, 0, "data initial byte out of range");
+
+	for (i = 1; i < len; i++) {
+		if (cur == 'z')
+			cur = 'a';
+		else
+			cur++;
+
+		if (data[i] != cur)
+			error(1, 0, "data[%d]: len %d, %c(%hhu) != %c(%hhu)\n",
+			      i, len,
+			      sanitized_char(data[i]), data[i],
+			      sanitized_char(cur), cur);
+	}
+}
+
+static int recv_msg(int fd, char *buf, int len, int *gso_size)
+{
+	char control[CMSG_SPACE(sizeof(int))] = {0};
+	struct msghdr msg = {0};
+	struct iovec iov = {0};
+	struct cmsghdr *cmsg;
+	int ret;
+
+	iov.iov_base = buf;
+	iov.iov_len = len;
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	msg.msg_control = control;
+	msg.msg_controllen = sizeof(control);
+
+	*gso_size = -1;
+	ret = recvmsg(fd, &msg, MSG_TRUNC | MSG_DONTWAIT);
+	if (ret != -1) {
+		for (cmsg = CMSG_FIRSTHDR(&msg); cmsg != NULL;
+		     cmsg = CMSG_NXTHDR(&msg, cmsg)) {
+			if (cmsg->cmsg_level == SOL_UDP
+			    && cmsg->cmsg_type == UDP_GRO) {
+				*gso_size = *(int *)CMSG_DATA(cmsg);
+				break;
+			}
+		}
+	}
+	return ret;
+}
+
+/* Flush all outstanding datagrams. Verify first few bytes of each. */
+static void do_flush_udp(int fd)
+{
+	static char rbuf[ETH_MAX_MTU];
+	int ret, len, gso_size = 0, budget = 256;
+
+	len = cfg_read_all ? sizeof(rbuf) : 0;
+	while (budget--) {
+		/* MSG_TRUNC will make return value full datagram length */
+		if (!cfg_expected_gso_size)
+			ret = recv(fd, rbuf, len, MSG_TRUNC | MSG_DONTWAIT);
+		else
+			ret = recv_msg(fd, rbuf, len, &gso_size);
+		if (ret == -1 && errno == EAGAIN)
+			break;
+		if (ret == -1)
+			error(1, errno, "recv");
+		if (cfg_expected_pkt_len && ret != cfg_expected_pkt_len)
+			error(1, 0, "recv: bad packet len, got %d,"
+			      " expected %d\n", ret, cfg_expected_pkt_len);
+		if (len && cfg_verify) {
+			if (ret == 0)
+				error(1, errno, "recv: 0 byte datagram\n");
+
+			do_verify_udp(rbuf, ret);
+		}
+		if (cfg_expected_gso_size && cfg_expected_gso_size != gso_size)
+			error(1, 0, "recv: bad gso size, got %d, expected %d "
+			      "(-1 == no gso cmsg))\n", gso_size,
+			      cfg_expected_gso_size);
+
+		packets++;
+		bytes += ret;
+		if (cfg_expected_pkt_nr && packets >= cfg_expected_pkt_nr)
+			break;
+	}
+}
+
+static void usage(const char *filepath)
+{
+	error(1, 0, "Usage: %s [-C connect_timeout] [-Grtv] [-b addr] [-p port]"
+	      " [-l pktlen] [-n packetnr] [-R rcv_timeout] [-S gsosize]",
+	      filepath);
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	const char *bind_addr = NULL;
+	int c;
+
+	while ((c = getopt(argc, argv, "4b:C:Gl:n:p:rR:S:tv")) != -1) {
+		switch (c) {
+		case '4':
+			cfg_family = PF_INET;
+			cfg_alen = sizeof(struct sockaddr_in);
+			break;
+		case 'b':
+			bind_addr = optarg;
+			break;
+		case 'C':
+			cfg_connect_timeout_ms = strtoul(optarg, NULL, 0);
+			break;
+		case 'G':
+			cfg_gro_segment = true;
+			break;
+		case 'l':
+			cfg_expected_pkt_len = strtoul(optarg, NULL, 0);
+			break;
+		case 'n':
+			cfg_expected_pkt_nr = strtoul(optarg, NULL, 0);
+			break;
+		case 'p':
+			cfg_port = strtoul(optarg, NULL, 0);
+			break;
+		case 'r':
+			cfg_read_all = true;
+			break;
+		case 'R':
+			cfg_rcv_timeout_ms = strtoul(optarg, NULL, 0);
+			break;
+		case 'S':
+			cfg_expected_gso_size = strtol(optarg, NULL, 0);
+			break;
+		case 't':
+			cfg_tcp = true;
+			break;
+		case 'v':
+			cfg_verify = true;
+			cfg_read_all = true;
+			break;
+		default:
+			exit(1);
+		}
+	}
+
+	if (!bind_addr)
+		bind_addr = cfg_family == PF_INET6 ? "::" : "0.0.0.0";
+
+	setup_sockaddr(cfg_family, bind_addr, &cfg_bind_addr);
+
+	if (optind != argc)
+		usage(argv[0]);
+
+	if (cfg_tcp && cfg_verify)
+		error(1, 0, "TODO: implement verify mode for tcp");
+}
+
+static void do_recv(void)
+{
+	int timeout_ms = cfg_tcp ? cfg_rcv_timeout_ms : cfg_connect_timeout_ms;
+	unsigned long tnow, treport;
+	int fd;
+
+	fd = do_socket(cfg_tcp);
+
+	if (cfg_gro_segment && !cfg_tcp) {
+		int val = 1;
+		if (setsockopt(fd, IPPROTO_UDP, UDP_GRO, &val, sizeof(val)))
+			error(1, errno, "setsockopt UDP_GRO");
+	}
+
+	treport = gettimeofday_ms() + 1000;
+	do {
+		do_poll(fd, timeout_ms);
+
+		if (cfg_tcp)
+			do_flush_tcp(fd);
+		else
+			do_flush_udp(fd);
+
+		tnow = gettimeofday_ms();
+		if (tnow > treport) {
+			if (packets)
+				fprintf(stderr,
+					"%s rx: %6lu MB/s %8lu calls/s\n",
+					cfg_tcp ? "tcp" : "udp",
+					bytes >> 20, packets);
+			bytes = packets = 0;
+			treport = tnow + 1000;
+		}
+
+		timeout_ms = cfg_rcv_timeout_ms;
+
+	} while (!interrupted);
+
+	if (cfg_expected_pkt_nr && (packets != cfg_expected_pkt_nr))
+		error(1, 0, "wrong packet number! got %ld, expected %d\n",
+		      packets, cfg_expected_pkt_nr);
+
+	if (close(fd))
+		error(1, errno, "close");
+}
+
+int main(int argc, char **argv)
+{
+	parse_opts(argc, argv);
+
+	signal(SIGINT, sigint_handler);
+
+	do_recv();
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/udpgso_bench_tx.c b/tools/testing/selftests/net/udpgso_bench_tx.c
new file mode 100644
index 000000000..477392715
--- /dev/null
+++ b/tools/testing/selftests/net/udpgso_bench_tx.c
@@ -0,0 +1,734 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <linux/errqueue.h>
+#include <linux/net_tstamp.h>
+#include <netinet/if_ether.h>
+#include <netinet/in.h>
+#include <netinet/ip.h>
+#include <netinet/ip6.h>
+#include <netinet/udp.h>
+#include <poll.h>
+#include <sched.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <sys/time.h>
+#include <sys/poll.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "../kselftest.h"
+
+#ifndef ETH_MAX_MTU
+#define ETH_MAX_MTU 0xFFFFU
+#endif
+
+#ifndef UDP_SEGMENT
+#define UDP_SEGMENT		103
+#endif
+
+#ifndef SO_ZEROCOPY
+#define SO_ZEROCOPY	60
+#endif
+
+#ifndef SO_EE_ORIGIN_ZEROCOPY
+#define SO_EE_ORIGIN_ZEROCOPY 5
+#endif
+
+#ifndef MSG_ZEROCOPY
+#define MSG_ZEROCOPY	0x4000000
+#endif
+
+#ifndef ENOTSUPP
+#define ENOTSUPP	524
+#endif
+
+#define NUM_PKT		100
+
+static bool	cfg_cache_trash;
+static int	cfg_cpu		= -1;
+static int	cfg_connected	= true;
+static int	cfg_family	= PF_UNSPEC;
+static uint16_t	cfg_mss;
+static int	cfg_payload_len	= (1472 * 42);
+static int	cfg_port	= 8000;
+static int	cfg_runtime_ms	= -1;
+static bool	cfg_poll;
+static int	cfg_poll_loop_timeout_ms = 2000;
+static bool	cfg_segment;
+static bool	cfg_sendmmsg;
+static bool	cfg_tcp;
+static uint32_t	cfg_tx_ts = SOF_TIMESTAMPING_TX_SOFTWARE;
+static bool	cfg_tx_tstamp;
+static bool	cfg_audit;
+static bool	cfg_verbose;
+static bool	cfg_zerocopy;
+static int	cfg_msg_nr;
+static uint16_t	cfg_gso_size;
+static unsigned long total_num_msgs;
+static unsigned long total_num_sends;
+static unsigned long stat_tx_ts;
+static unsigned long stat_tx_ts_errors;
+static unsigned long tstart;
+static unsigned long tend;
+static unsigned long stat_zcopies;
+
+static socklen_t cfg_alen;
+static struct sockaddr_storage cfg_dst_addr;
+
+static bool interrupted;
+static char buf[NUM_PKT][ETH_MAX_MTU];
+
+static void sigint_handler(int signum)
+{
+	if (signum == SIGINT)
+		interrupted = true;
+}
+
+static unsigned long gettimeofday_ms(void)
+{
+	struct timeval tv;
+
+	gettimeofday(&tv, NULL);
+	return (tv.tv_sec * 1000) + (tv.tv_usec / 1000);
+}
+
+static int set_cpu(int cpu)
+{
+	cpu_set_t mask;
+
+	CPU_ZERO(&mask);
+	CPU_SET(cpu, &mask);
+	if (sched_setaffinity(0, sizeof(mask), &mask))
+		error(1, 0, "setaffinity %d", cpu);
+
+	return 0;
+}
+
+static void setup_sockaddr(int domain, const char *str_addr, void *sockaddr)
+{
+	struct sockaddr_in6 *addr6 = (void *) sockaddr;
+	struct sockaddr_in *addr4 = (void *) sockaddr;
+
+	switch (domain) {
+	case PF_INET:
+		addr4->sin_family = AF_INET;
+		addr4->sin_port = htons(cfg_port);
+		if (inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1)
+			error(1, 0, "ipv4 parse error: %s", str_addr);
+		break;
+	case PF_INET6:
+		addr6->sin6_family = AF_INET6;
+		addr6->sin6_port = htons(cfg_port);
+		if (inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1)
+			error(1, 0, "ipv6 parse error: %s", str_addr);
+		break;
+	default:
+		error(1, 0, "illegal domain");
+	}
+}
+
+static void flush_cmsg(struct cmsghdr *cmsg)
+{
+	struct sock_extended_err *err;
+	struct scm_timestamping *tss;
+	__u32 lo;
+	__u32 hi;
+	int i;
+
+	switch (cmsg->cmsg_level) {
+	case SOL_SOCKET:
+		if (cmsg->cmsg_type == SO_TIMESTAMPING) {
+			i = (cfg_tx_ts == SOF_TIMESTAMPING_TX_HARDWARE) ? 2 : 0;
+			tss = (struct scm_timestamping *)CMSG_DATA(cmsg);
+			if (tss->ts[i].tv_sec == 0)
+				stat_tx_ts_errors++;
+		} else {
+			error(1, 0, "unknown SOL_SOCKET cmsg type=%u\n",
+			      cmsg->cmsg_type);
+		}
+		break;
+	case SOL_IP:
+	case SOL_IPV6:
+		switch (cmsg->cmsg_type) {
+		case IP_RECVERR:
+		case IPV6_RECVERR:
+		{
+			err = (struct sock_extended_err *)CMSG_DATA(cmsg);
+			switch (err->ee_origin) {
+			case SO_EE_ORIGIN_TIMESTAMPING:
+				/* Got a TX timestamp from error queue */
+				stat_tx_ts++;
+				break;
+			case SO_EE_ORIGIN_ICMP:
+			case SO_EE_ORIGIN_ICMP6:
+				if (cfg_verbose)
+					fprintf(stderr,
+						"received ICMP error: type=%u, code=%u\n",
+						err->ee_type, err->ee_code);
+				break;
+			case SO_EE_ORIGIN_ZEROCOPY:
+			{
+				lo = err->ee_info;
+				hi = err->ee_data;
+				/* range of IDs acknowledged */
+				stat_zcopies += hi - lo + 1;
+				break;
+			}
+			case SO_EE_ORIGIN_LOCAL:
+				if (cfg_verbose)
+					fprintf(stderr,
+						"received packet with local origin: %u\n",
+						err->ee_origin);
+				break;
+			default:
+				error(0, 1, "received packet with origin: %u",
+				      err->ee_origin);
+			}
+			break;
+		}
+		default:
+			error(0, 1, "unknown IP msg type=%u\n",
+			      cmsg->cmsg_type);
+			break;
+		}
+		break;
+	default:
+		error(0, 1, "unknown cmsg level=%u\n",
+		      cmsg->cmsg_level);
+	}
+}
+
+static void flush_errqueue_recv(int fd)
+{
+	char control[CMSG_SPACE(sizeof(struct scm_timestamping)) +
+		     CMSG_SPACE(sizeof(struct sock_extended_err)) +
+		     CMSG_SPACE(sizeof(struct sockaddr_in6))] = {0};
+	struct msghdr msg = {0};
+	struct cmsghdr *cmsg;
+	int ret;
+
+	while (1) {
+		msg.msg_control = control;
+		msg.msg_controllen = sizeof(control);
+		ret = recvmsg(fd, &msg, MSG_ERRQUEUE);
+		if (ret == -1 && errno == EAGAIN)
+			break;
+		if (ret == -1)
+			error(1, errno, "errqueue");
+		if (msg.msg_flags != MSG_ERRQUEUE)
+			error(1, 0, "errqueue: flags 0x%x\n", msg.msg_flags);
+		if (cfg_audit) {
+			for (cmsg = CMSG_FIRSTHDR(&msg);
+					cmsg;
+					cmsg = CMSG_NXTHDR(&msg, cmsg))
+				flush_cmsg(cmsg);
+		}
+		msg.msg_flags = 0;
+	}
+}
+
+static void flush_errqueue(int fd, const bool do_poll,
+			   unsigned long poll_timeout, const bool poll_err)
+{
+	if (do_poll) {
+		struct pollfd fds = {0};
+		int ret;
+
+		fds.fd = fd;
+		ret = poll(&fds, 1, poll_timeout);
+		if (ret == 0) {
+			if ((cfg_verbose) && (poll_err))
+				fprintf(stderr, "poll timeout\n");
+		} else if (ret < 0) {
+			error(1, errno, "poll");
+		}
+	}
+
+	flush_errqueue_recv(fd);
+}
+
+static void flush_errqueue_retry(int fd, unsigned long num_sends)
+{
+	unsigned long tnow, tstop;
+	bool first_try = true;
+
+	tnow = gettimeofday_ms();
+	tstop = tnow + cfg_poll_loop_timeout_ms;
+	do {
+		flush_errqueue(fd, true, tstop - tnow, first_try);
+		first_try = false;
+		tnow = gettimeofday_ms();
+	} while ((stat_zcopies != num_sends) && (tnow < tstop));
+}
+
+static int send_tcp(int fd, char *data)
+{
+	int ret, done = 0, count = 0;
+
+	while (done < cfg_payload_len) {
+		ret = send(fd, data + done, cfg_payload_len - done,
+			   cfg_zerocopy ? MSG_ZEROCOPY : 0);
+		if (ret == -1)
+			error(1, errno, "write");
+
+		done += ret;
+		count++;
+	}
+
+	return count;
+}
+
+static int send_udp(int fd, char *data)
+{
+	int ret, total_len, len, count = 0;
+
+	total_len = cfg_payload_len;
+
+	while (total_len) {
+		len = total_len < cfg_mss ? total_len : cfg_mss;
+
+		ret = sendto(fd, data, len, cfg_zerocopy ? MSG_ZEROCOPY : 0,
+			     cfg_connected ? NULL : (void *)&cfg_dst_addr,
+			     cfg_connected ? 0 : cfg_alen);
+		if (ret == -1)
+			error(1, errno, "write");
+		if (ret != len)
+			error(1, errno, "write: %uB != %uB\n", ret, len);
+
+		total_len -= len;
+		count++;
+	}
+
+	return count;
+}
+
+static void send_ts_cmsg(struct cmsghdr *cm)
+{
+	uint32_t *valp;
+
+	cm->cmsg_level = SOL_SOCKET;
+	cm->cmsg_type = SO_TIMESTAMPING;
+	cm->cmsg_len = CMSG_LEN(sizeof(cfg_tx_ts));
+	valp = (void *)CMSG_DATA(cm);
+	*valp = cfg_tx_ts;
+}
+
+static int send_udp_sendmmsg(int fd, char *data)
+{
+	char control[CMSG_SPACE(sizeof(cfg_tx_ts))] = {0};
+	const int max_nr_msg = ETH_MAX_MTU / ETH_DATA_LEN;
+	struct mmsghdr mmsgs[max_nr_msg];
+	struct iovec iov[max_nr_msg];
+	unsigned int off = 0, left;
+	size_t msg_controllen = 0;
+	int i = 0, ret;
+
+	memset(mmsgs, 0, sizeof(mmsgs));
+
+	if (cfg_tx_tstamp) {
+		struct msghdr msg = {0};
+		struct cmsghdr *cmsg;
+
+		msg.msg_control = control;
+		msg.msg_controllen = sizeof(control);
+		cmsg = CMSG_FIRSTHDR(&msg);
+		send_ts_cmsg(cmsg);
+		msg_controllen += CMSG_SPACE(sizeof(cfg_tx_ts));
+	}
+
+	left = cfg_payload_len;
+	while (left) {
+		if (i == max_nr_msg)
+			error(1, 0, "sendmmsg: exceeds max_nr_msg");
+
+		iov[i].iov_base = data + off;
+		iov[i].iov_len = cfg_mss < left ? cfg_mss : left;
+
+		mmsgs[i].msg_hdr.msg_iov = iov + i;
+		mmsgs[i].msg_hdr.msg_iovlen = 1;
+
+		mmsgs[i].msg_hdr.msg_name = (void *)&cfg_dst_addr;
+		mmsgs[i].msg_hdr.msg_namelen = cfg_alen;
+		if (msg_controllen) {
+			mmsgs[i].msg_hdr.msg_control = control;
+			mmsgs[i].msg_hdr.msg_controllen = msg_controllen;
+		}
+
+		off += iov[i].iov_len;
+		left -= iov[i].iov_len;
+		i++;
+	}
+
+	ret = sendmmsg(fd, mmsgs, i, cfg_zerocopy ? MSG_ZEROCOPY : 0);
+	if (ret == -1)
+		error(1, errno, "sendmmsg");
+
+	return ret;
+}
+
+static void send_udp_segment_cmsg(struct cmsghdr *cm)
+{
+	uint16_t *valp;
+
+	cm->cmsg_level = SOL_UDP;
+	cm->cmsg_type = UDP_SEGMENT;
+	cm->cmsg_len = CMSG_LEN(sizeof(cfg_gso_size));
+	valp = (void *)CMSG_DATA(cm);
+	*valp = cfg_gso_size;
+}
+
+static int send_udp_segment(int fd, char *data)
+{
+	char control[CMSG_SPACE(sizeof(cfg_gso_size)) +
+		     CMSG_SPACE(sizeof(cfg_tx_ts))] = {0};
+	struct msghdr msg = {0};
+	struct iovec iov = {0};
+	size_t msg_controllen;
+	struct cmsghdr *cmsg;
+	int ret;
+
+	iov.iov_base = data;
+	iov.iov_len = cfg_payload_len;
+
+	msg.msg_iov = &iov;
+	msg.msg_iovlen = 1;
+
+	msg.msg_control = control;
+	msg.msg_controllen = sizeof(control);
+	cmsg = CMSG_FIRSTHDR(&msg);
+	send_udp_segment_cmsg(cmsg);
+	msg_controllen = CMSG_SPACE(sizeof(cfg_mss));
+	if (cfg_tx_tstamp) {
+		cmsg = CMSG_NXTHDR(&msg, cmsg);
+		send_ts_cmsg(cmsg);
+		msg_controllen += CMSG_SPACE(sizeof(cfg_tx_ts));
+	}
+
+	msg.msg_controllen = msg_controllen;
+	msg.msg_name = (void *)&cfg_dst_addr;
+	msg.msg_namelen = cfg_alen;
+
+	ret = sendmsg(fd, &msg, cfg_zerocopy ? MSG_ZEROCOPY : 0);
+	if (ret == -1)
+		error(1, errno, "sendmsg");
+	if (ret != iov.iov_len)
+		error(1, 0, "sendmsg: %u != %llu\n", ret,
+			(unsigned long long)iov.iov_len);
+
+	return 1;
+}
+
+static void usage(const char *filepath)
+{
+	error(1, 0, "Usage: %s [-46acmHPtTuvz] [-C cpu] [-D dst ip] [-l secs] "
+		    "[-L secs] [-M messagenr] [-p port] [-s sendsize] [-S gsosize]",
+		    filepath);
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	const char *bind_addr = NULL;
+	int max_len, hdrlen;
+	int c;
+
+	while ((c = getopt(argc, argv, "46acC:D:Hl:L:mM:p:s:PS:tTuvz")) != -1) {
+		switch (c) {
+		case '4':
+			if (cfg_family != PF_UNSPEC)
+				error(1, 0, "Pass one of -4 or -6");
+			cfg_family = PF_INET;
+			cfg_alen = sizeof(struct sockaddr_in);
+			break;
+		case '6':
+			if (cfg_family != PF_UNSPEC)
+				error(1, 0, "Pass one of -4 or -6");
+			cfg_family = PF_INET6;
+			cfg_alen = sizeof(struct sockaddr_in6);
+			break;
+		case 'a':
+			cfg_audit = true;
+			break;
+		case 'c':
+			cfg_cache_trash = true;
+			break;
+		case 'C':
+			cfg_cpu = strtol(optarg, NULL, 0);
+			break;
+		case 'D':
+			bind_addr = optarg;
+			break;
+		case 'l':
+			cfg_runtime_ms = strtoul(optarg, NULL, 10) * 1000;
+			break;
+		case 'L':
+			cfg_poll_loop_timeout_ms = strtoul(optarg, NULL, 10) * 1000;
+			break;
+		case 'm':
+			cfg_sendmmsg = true;
+			break;
+		case 'M':
+			cfg_msg_nr = strtoul(optarg, NULL, 10);
+			break;
+		case 'p':
+			cfg_port = strtoul(optarg, NULL, 0);
+			break;
+		case 'P':
+			cfg_poll = true;
+			break;
+		case 's':
+			cfg_payload_len = strtoul(optarg, NULL, 0);
+			break;
+		case 'S':
+			cfg_gso_size = strtoul(optarg, NULL, 0);
+			cfg_segment = true;
+			break;
+		case 'H':
+			cfg_tx_ts = SOF_TIMESTAMPING_TX_HARDWARE;
+			cfg_tx_tstamp = true;
+			break;
+		case 't':
+			cfg_tcp = true;
+			break;
+		case 'T':
+			cfg_tx_tstamp = true;
+			break;
+		case 'u':
+			cfg_connected = false;
+			break;
+		case 'v':
+			cfg_verbose = true;
+			break;
+		case 'z':
+			cfg_zerocopy = true;
+			break;
+		default:
+			exit(1);
+		}
+	}
+
+	if (!bind_addr)
+		bind_addr = cfg_family == PF_INET6 ? "::" : "0.0.0.0";
+
+	setup_sockaddr(cfg_family, bind_addr, &cfg_dst_addr);
+
+	if (optind != argc)
+		usage(argv[0]);
+
+	if (cfg_family == PF_UNSPEC)
+		error(1, 0, "must pass one of -4 or -6");
+	if (cfg_tcp && !cfg_connected)
+		error(1, 0, "connectionless tcp makes no sense");
+	if (cfg_segment && cfg_sendmmsg)
+		error(1, 0, "cannot combine segment offload and sendmmsg");
+	if (cfg_tx_tstamp && !(cfg_segment || cfg_sendmmsg))
+		error(1, 0, "Options -T and -H require either -S or -m option");
+
+	if (cfg_family == PF_INET)
+		hdrlen = sizeof(struct iphdr) + sizeof(struct udphdr);
+	else
+		hdrlen = sizeof(struct ip6_hdr) + sizeof(struct udphdr);
+
+	cfg_mss = ETH_DATA_LEN - hdrlen;
+	max_len = ETH_MAX_MTU - hdrlen;
+	if (!cfg_gso_size)
+		cfg_gso_size = cfg_mss;
+
+	if (cfg_payload_len > max_len)
+		error(1, 0, "payload length %u exceeds max %u",
+		      cfg_payload_len, max_len);
+}
+
+static void set_pmtu_discover(int fd, bool is_ipv4)
+{
+	int level, name, val;
+
+	if (is_ipv4) {
+		level	= SOL_IP;
+		name	= IP_MTU_DISCOVER;
+		val	= IP_PMTUDISC_DO;
+	} else {
+		level	= SOL_IPV6;
+		name	= IPV6_MTU_DISCOVER;
+		val	= IPV6_PMTUDISC_DO;
+	}
+
+	if (setsockopt(fd, level, name, &val, sizeof(val)))
+		error(1, errno, "setsockopt path mtu");
+}
+
+static void set_tx_timestamping(int fd)
+{
+	int val = SOF_TIMESTAMPING_OPT_CMSG | SOF_TIMESTAMPING_OPT_ID |
+			SOF_TIMESTAMPING_OPT_TSONLY;
+
+	if (cfg_tx_ts == SOF_TIMESTAMPING_TX_SOFTWARE)
+		val |= SOF_TIMESTAMPING_SOFTWARE;
+	else
+		val |= SOF_TIMESTAMPING_RAW_HARDWARE;
+
+	if (setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)))
+		error(1, errno, "setsockopt tx timestamping");
+}
+
+static void print_audit_report(unsigned long num_msgs, unsigned long num_sends)
+{
+	unsigned long tdelta;
+
+	tdelta = tend - tstart;
+	if (!tdelta)
+		return;
+
+	fprintf(stderr, "Summary over %lu.%03lu seconds...\n",
+			tdelta / 1000, tdelta % 1000);
+	fprintf(stderr,
+		"sum %s tx: %6lu MB/s %10lu calls (%lu/s) %10lu msgs (%lu/s)\n",
+		cfg_tcp ? "tcp" : "udp",
+		((num_msgs * cfg_payload_len) >> 10) / tdelta,
+		num_sends, num_sends * 1000 / tdelta,
+		num_msgs, num_msgs * 1000 / tdelta);
+
+	if (cfg_tx_tstamp) {
+		if (stat_tx_ts_errors)
+			error(1, 0,
+			      "Expected clean TX Timestamps: %9lu msgs received %6lu errors",
+			      stat_tx_ts, stat_tx_ts_errors);
+		if (stat_tx_ts != num_sends)
+			error(1, 0,
+			      "Unexpected number of TX Timestamps: %9lu expected %9lu received",
+			      num_sends, stat_tx_ts);
+		fprintf(stderr,
+			"Tx Timestamps: %19lu received %17lu errors\n",
+			stat_tx_ts, stat_tx_ts_errors);
+	}
+
+	if (cfg_zerocopy) {
+		if (stat_zcopies != num_sends)
+			error(1, 0, "Unexpected number of Zerocopy completions: %9lu expected %9lu received",
+			      num_sends, stat_zcopies);
+		fprintf(stderr,
+			"Zerocopy acks: %19lu\n",
+			stat_zcopies);
+	}
+}
+
+static void print_report(unsigned long num_msgs, unsigned long num_sends)
+{
+	fprintf(stderr,
+		"%s tx: %6lu MB/s %8lu calls/s %6lu msg/s\n",
+		cfg_tcp ? "tcp" : "udp",
+		(num_msgs * cfg_payload_len) >> 20,
+		num_sends, num_msgs);
+
+	if (cfg_audit) {
+		total_num_msgs += num_msgs;
+		total_num_sends += num_sends;
+	}
+}
+
+int main(int argc, char **argv)
+{
+	unsigned long num_msgs, num_sends;
+	unsigned long tnow, treport, tstop;
+	int fd, i, val, ret;
+
+	parse_opts(argc, argv);
+
+	if (cfg_cpu > 0)
+		set_cpu(cfg_cpu);
+
+	for (i = 0; i < sizeof(buf[0]); i++)
+		buf[0][i] = 'a' + (i % 26);
+	for (i = 1; i < NUM_PKT; i++)
+		memcpy(buf[i], buf[0], sizeof(buf[0]));
+
+	signal(SIGINT, sigint_handler);
+
+	fd = socket(cfg_family, cfg_tcp ? SOCK_STREAM : SOCK_DGRAM, 0);
+	if (fd == -1)
+		error(1, errno, "socket");
+
+	if (cfg_zerocopy) {
+		val = 1;
+
+		ret = setsockopt(fd, SOL_SOCKET, SO_ZEROCOPY,
+				 &val, sizeof(val));
+		if (ret) {
+			if (errno == ENOPROTOOPT || errno == ENOTSUPP) {
+				fprintf(stderr, "SO_ZEROCOPY not supported");
+				exit(KSFT_SKIP);
+			}
+			error(1, errno, "setsockopt zerocopy");
+		}
+	}
+
+	if (cfg_connected &&
+	    connect(fd, (void *)&cfg_dst_addr, cfg_alen))
+		error(1, errno, "connect");
+
+	if (cfg_segment)
+		set_pmtu_discover(fd, cfg_family == PF_INET);
+
+	if (cfg_tx_tstamp)
+		set_tx_timestamping(fd);
+
+	num_msgs = num_sends = 0;
+	tnow = gettimeofday_ms();
+	tstart = tnow;
+	tend = tnow;
+	tstop = tnow + cfg_runtime_ms;
+	treport = tnow + 1000;
+
+	i = 0;
+	do {
+		if (cfg_tcp)
+			num_sends += send_tcp(fd, buf[i]);
+		else if (cfg_segment)
+			num_sends += send_udp_segment(fd, buf[i]);
+		else if (cfg_sendmmsg)
+			num_sends += send_udp_sendmmsg(fd, buf[i]);
+		else
+			num_sends += send_udp(fd, buf[i]);
+		num_msgs++;
+		if ((cfg_zerocopy && ((num_msgs & 0xF) == 0)) || cfg_tx_tstamp)
+			flush_errqueue(fd, cfg_poll, 500, true);
+
+		if (cfg_msg_nr && num_msgs >= cfg_msg_nr)
+			break;
+
+		tnow = gettimeofday_ms();
+		if (tnow >= treport) {
+			print_report(num_msgs, num_sends);
+			num_msgs = num_sends = 0;
+			treport = tnow + 1000;
+		}
+
+		/* cold cache when writing buffer */
+		if (cfg_cache_trash)
+			i = ++i < NUM_PKT ? i : 0;
+
+	} while (!interrupted && (cfg_runtime_ms == -1 || tnow < tstop));
+
+	if (cfg_zerocopy || cfg_tx_tstamp)
+		flush_errqueue_retry(fd, num_sends);
+
+	if (close(fd))
+		error(1, errno, "close");
+
+	if (cfg_audit) {
+		tend = tnow;
+		total_num_msgs += num_msgs;
+		total_num_sends += num_sends;
+		print_audit_report(total_num_msgs, total_num_sends);
+	}
+
+	return 0;
+}
diff --git a/tools/testing/selftests/net/vrf-xfrm-tests.sh b/tools/testing/selftests/net/vrf-xfrm-tests.sh
new file mode 100755
index 000000000..452638ae8
--- /dev/null
+++ b/tools/testing/selftests/net/vrf-xfrm-tests.sh
@@ -0,0 +1,436 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Various combinations of VRF with xfrms and qdisc.
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+PAUSE_ON_FAIL=no
+VERBOSE=0
+ret=0
+
+HOST1_4=192.168.1.1
+HOST2_4=192.168.1.2
+HOST1_6=2001:db8:1::1
+HOST2_6=2001:db8:1::2
+
+XFRM1_4=10.0.1.1
+XFRM2_4=10.0.1.2
+XFRM1_6=fc00:1000::1
+XFRM2_6=fc00:1000::2
+IF_ID=123
+
+VRF=red
+TABLE=300
+
+AUTH_1=0xd94fcfea65fddf21dc6e0d24a0253508
+AUTH_2=0xdc6e0d24a0253508d94fcfea65fddf21
+ENC_1=0xfc46c20f8048be9725930ff3fb07ac2a91f0347dffeacf62
+ENC_2=0x3fb07ac2a91f0347dffeacf62fc46c20f8048be9725930ff
+SPI_1=0x02122b77
+SPI_2=0x2b770212
+
+which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
+
+################################################################################
+#
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+run_cmd_host1()
+{
+	local cmd="$*"
+	local out
+	local rc
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "    COMMAND: $cmd\n"
+	fi
+
+	out=$(eval ip netns exec host1 $cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" ]; then
+		if [ -n "$out" ]; then
+			echo
+			echo "    $out"
+		fi
+		echo
+	fi
+
+	return $rc
+}
+
+################################################################################
+# create namespaces for hosts and sws
+
+create_vrf()
+{
+	local ns=$1
+	local vrf=$2
+	local table=$3
+
+	if [ -n "${ns}" ]; then
+		ns="-netns ${ns}"
+	fi
+
+	ip ${ns} link add ${vrf} type vrf table ${table}
+	ip ${ns} link set ${vrf} up
+	ip ${ns} route add vrf ${vrf} unreachable default metric 8192
+	ip ${ns} -6 route add vrf ${vrf} unreachable default metric 8192
+
+	ip ${ns} addr add 127.0.0.1/8 dev ${vrf}
+	ip ${ns} -6 addr add ::1 dev ${vrf} nodad
+
+	ip ${ns} ru del pref 0
+	ip ${ns} ru add pref 32765 from all lookup local
+	ip ${ns} -6 ru del pref 0
+	ip ${ns} -6 ru add pref 32765 from all lookup local
+}
+
+create_ns()
+{
+	local ns=$1
+	local addr=$2
+	local addr6=$3
+
+	[ -z "${addr}" ] && addr="-"
+	[ -z "${addr6}" ] && addr6="-"
+
+	ip netns add ${ns}
+
+	ip -netns ${ns} link set lo up
+	if [ "${addr}" != "-" ]; then
+		ip -netns ${ns} addr add dev lo ${addr}
+	fi
+	if [ "${addr6}" != "-" ]; then
+		ip -netns ${ns} -6 addr add dev lo ${addr6}
+	fi
+
+	ip -netns ${ns} ro add unreachable default metric 8192
+	ip -netns ${ns} -6 ro add unreachable default metric 8192
+
+	ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1
+	ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0
+}
+
+# create veth pair to connect namespaces and apply addresses.
+connect_ns()
+{
+	local ns1=$1
+	local ns1_dev=$2
+	local ns1_addr=$3
+	local ns1_addr6=$4
+	local ns2=$5
+	local ns2_dev=$6
+	local ns2_addr=$7
+	local ns2_addr6=$8
+	local ns1arg
+	local ns2arg
+
+	if [ -n "${ns1}" ]; then
+		ns1arg="-netns ${ns1}"
+	fi
+	if [ -n "${ns2}" ]; then
+		ns2arg="-netns ${ns2}"
+	fi
+
+	ip ${ns1arg} li add ${ns1_dev} type veth peer name tmp
+	ip ${ns1arg} li set ${ns1_dev} up
+	ip ${ns1arg} li set tmp netns ${ns2} name ${ns2_dev}
+	ip ${ns2arg} li set ${ns2_dev} up
+
+	if [ "${ns1_addr}" != "-" ]; then
+		ip ${ns1arg} addr add dev ${ns1_dev} ${ns1_addr}
+		ip ${ns2arg} addr add dev ${ns2_dev} ${ns2_addr}
+	fi
+
+	if [ "${ns1_addr6}" != "-" ]; then
+		ip ${ns1arg} addr add dev ${ns1_dev} ${ns1_addr6} nodad
+		ip ${ns2arg} addr add dev ${ns2_dev} ${ns2_addr6} nodad
+	fi
+}
+
+################################################################################
+
+cleanup()
+{
+	ip netns del host1
+	ip netns del host2
+}
+
+setup()
+{
+	create_ns "host1"
+	create_ns "host2"
+
+	connect_ns "host1" eth0 ${HOST1_4}/24 ${HOST1_6}/64 \
+	           "host2" eth0 ${HOST2_4}/24 ${HOST2_6}/64
+
+	create_vrf "host1" ${VRF} ${TABLE}
+	ip -netns host1 link set dev eth0 master ${VRF}
+}
+
+cleanup_xfrm()
+{
+	for ns in host1 host2
+	do
+		for x in state policy
+		do
+			ip -netns ${ns} xfrm ${x} flush
+			ip -6 -netns ${ns} xfrm ${x} flush
+		done
+	done
+}
+
+setup_xfrm()
+{
+	local h1_4=$1
+	local h2_4=$2
+	local h1_6=$3
+	local h2_6=$4
+	local devarg="$5"
+
+	#
+	# policy
+	#
+
+	# host1 - IPv4 out
+	ip -netns host1 xfrm policy add \
+	  src ${h1_4} dst ${h2_4} ${devarg} dir out \
+	  tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel
+
+	# host2 - IPv4 in
+	ip -netns host2 xfrm policy add \
+	  src ${h1_4} dst ${h2_4} dir in \
+	  tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel
+
+	# host1 - IPv4 in
+	ip -netns host1 xfrm policy add \
+	  src ${h2_4} dst ${h1_4} ${devarg} dir in \
+	  tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel
+
+	# host2 - IPv4 out
+	ip -netns host2 xfrm policy add \
+	  src ${h2_4} dst ${h1_4} dir out \
+	  tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel
+
+
+	# host1 - IPv6 out
+	ip -6 -netns host1 xfrm policy add \
+	  src ${h1_6} dst ${h2_6} ${devarg} dir out \
+	  tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel
+
+	# host2 - IPv6 in
+	ip -6 -netns host2 xfrm policy add \
+	  src ${h1_6} dst ${h2_6} dir in \
+	  tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel
+
+	# host1 - IPv6 in
+	ip -6 -netns host1 xfrm policy add \
+	  src ${h2_6} dst ${h1_6} ${devarg} dir in \
+	  tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel
+
+	# host2 - IPv6 out
+	ip -6 -netns host2 xfrm policy add \
+	  src ${h2_6} dst ${h1_6} dir out \
+	  tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel
+
+	#
+	# state
+	#
+	ip -netns host1 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
+	    proto esp spi ${SPI_1} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
+	    enc 'cbc(aes)' ${ENC_1} \
+	    sel src ${h1_4} dst ${h2_4} ${devarg}
+
+	ip -netns host2 xfrm state add src ${HOST1_4} dst ${HOST2_4} \
+	    proto esp spi ${SPI_1} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
+	    enc 'cbc(aes)' ${ENC_1} \
+	    sel src ${h1_4} dst ${h2_4}
+
+
+	ip -netns host1 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
+	    proto esp spi ${SPI_2} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
+	    enc 'cbc(aes)' ${ENC_2} \
+	    sel src ${h2_4} dst ${h1_4} ${devarg}
+
+	ip -netns host2 xfrm state add src ${HOST2_4} dst ${HOST1_4} \
+	    proto esp spi ${SPI_2} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
+	    enc 'cbc(aes)' ${ENC_2} \
+	    sel src ${h2_4} dst ${h1_4}
+
+
+	ip -6 -netns host1 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
+	    proto esp spi ${SPI_1} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
+	    enc 'cbc(aes)' ${ENC_1} \
+	    sel src ${h1_6} dst ${h2_6} ${devarg}
+
+	ip -6 -netns host2 xfrm state add src ${HOST1_6} dst ${HOST2_6} \
+	    proto esp spi ${SPI_1} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \
+	    enc 'cbc(aes)' ${ENC_1} \
+	    sel src ${h1_6} dst ${h2_6}
+
+
+	ip -6 -netns host1 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
+	    proto esp spi ${SPI_2} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
+	    enc 'cbc(aes)' ${ENC_2} \
+	    sel src ${h2_6} dst ${h1_6} ${devarg}
+
+	ip -6 -netns host2 xfrm state add src ${HOST2_6} dst ${HOST1_6} \
+	    proto esp spi ${SPI_2} reqid 0 mode tunnel \
+	    replay-window 4 replay-oseq 0x4 \
+	    auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \
+	    enc 'cbc(aes)' ${ENC_2} \
+	    sel src ${h2_6} dst ${h1_6}
+}
+
+cleanup_xfrm_dev()
+{
+	ip -netns host1 li del xfrm0
+	ip -netns host2 addr del ${XFRM2_4}/24 dev eth0
+	ip -netns host2 addr del ${XFRM2_6}/64 dev eth0
+}
+
+setup_xfrm_dev()
+{
+	local vrfarg="vrf ${VRF}"
+
+	ip -netns host1 li add type xfrm dev eth0 if_id ${IF_ID}
+	ip -netns host1 li set xfrm0 ${vrfarg} up
+	ip -netns host1 addr add ${XFRM1_4}/24 dev xfrm0
+	ip -netns host1 addr add ${XFRM1_6}/64 dev xfrm0
+
+	ip -netns host2 addr add ${XFRM2_4}/24 dev eth0
+	ip -netns host2 addr add ${XFRM2_6}/64 dev eth0
+
+	setup_xfrm ${XFRM1_4} ${XFRM2_4} ${XFRM1_6} ${XFRM2_6} "if_id ${IF_ID}"
+}
+
+run_tests()
+{
+	cleanup_xfrm
+
+	# no IPsec
+	run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4}
+	log_test $? 0 "IPv4 no xfrm policy"
+	run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6}
+	log_test $? 0 "IPv6 no xfrm policy"
+
+	# xfrm without VRF in sel
+	setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6}
+	run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4}
+	log_test $? 0 "IPv4 xfrm policy based on address"
+	run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6}
+	log_test $? 0 "IPv6 xfrm policy based on address"
+	cleanup_xfrm
+
+	# xfrm with VRF in sel
+	# Known failure: ipv4 resets the flow oif after the lookup. Fix is
+	# not straightforward.
+	# setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6} "dev ${VRF}"
+	# run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4}
+	# log_test $? 0 "IPv4 xfrm policy with VRF in selector"
+	run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6}
+	log_test $? 0 "IPv6 xfrm policy with VRF in selector"
+	cleanup_xfrm
+
+	# xfrm with enslaved device in sel
+	# Known failures: combined with the above, __xfrm{4,6}_selector_match
+	# needs to consider both l3mdev and enslaved device index.
+	# setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6} "dev eth0"
+	# run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4}
+	# log_test $? 0 "IPv4 xfrm policy with enslaved device in selector"
+	# run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6}
+	# log_test $? 0 "IPv6 xfrm policy with enslaved device in selector"
+	# cleanup_xfrm
+
+	# xfrm device
+	setup_xfrm_dev
+	run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${XFRM2_4}
+	log_test $? 0 "IPv4 xfrm policy with xfrm device"
+	run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${XFRM2_6}
+	log_test $? 0 "IPv6 xfrm policy with xfrm device"
+	cleanup_xfrm_dev
+}
+
+################################################################################
+# usage
+
+usage()
+{
+        cat <<EOF
+usage: ${0##*/} OPTS
+
+        -p          Pause on fail
+        -v          verbose mode (show commands and output)
+
+done
+EOF
+}
+
+################################################################################
+# main
+
+while getopts :pv o
+do
+	case $o in
+		p) PAUSE_ON_FAIL=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+cleanup 2>/dev/null
+setup
+
+echo
+echo "No qdisc on VRF device"
+run_tests
+
+run_cmd_host1 tc qdisc add dev ${VRF} root netem delay 100ms
+echo
+echo "netem qdisc on VRF device"
+run_tests
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n"   ${nfail}
+
+exit $ret
diff --git a/tools/testing/selftests/net/vrf_route_leaking.sh b/tools/testing/selftests/net/vrf_route_leaking.sh
new file mode 100755
index 000000000..23cf92475
--- /dev/null
+++ b/tools/testing/selftests/net/vrf_route_leaking.sh
@@ -0,0 +1,626 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019 David Ahern <dsahern@gmail.com>. All rights reserved.
+# Copyright (c) 2020 Michael Jeanson <mjeanson@efficios.com>. All rights reserved.
+#
+# Requires CONFIG_NET_VRF, CONFIG_VETH, CONFIG_BRIDGE and CONFIG_NET_NS.
+#
+#
+# Symmetric routing topology
+#
+#                     blue         red
+# +----+              .253 +----+ .253              +----+
+# | h1 |-------------------| r1 |-------------------| h2 |
+# +----+ .1                +----+                .2 +----+
+#         172.16.1/24                  172.16.2/24
+#    2001:db8:16:1/64                  2001:db8:16:2/64
+#
+#
+# Route from h1 to h2 and back goes through r1, incoming vrf blue has a route
+# to the outgoing vrf red for the n2 network and red has a route back to n1.
+# The red VRF interface has a MTU of 1400.
+#
+# The first test sends a ping with a ttl of 1 from h1 to h2 and parses the
+# output of the command to check that a ttl expired error is received.
+#
+# The second test runs traceroute from h1 to h2 and parses the output to check
+# for a hop on r1.
+#
+# The third test sends a ping with a packet size of 1450 from h1 to h2 and
+# parses the output of the command to check that a fragmentation error is
+# received.
+#
+#
+# Asymmetric routing topology
+#
+# This topology represents a customer setup where the issue with icmp errors
+# and VRF route leaking was initialy reported. The MTU test isn't done here
+# because of the lack of a return route in the red VRF.
+#
+#                     blue         red
+#                     .253 +----+ .253
+#                     +----| r1 |----+
+#                     |    +----+    |
+# +----+              |              |              +----+
+# | h1 |--------------+              +--------------| h2 |
+# +----+ .1           |              |           .2 +----+
+#         172.16.1/24 |    +----+    | 172.16.2/24
+#    2001:db8:16:1/64 +----| r2 |----+ 2001:db8:16:2/64
+#                     .254 +----+ .254
+#
+#
+# Route from h1 to h2 goes through r1, incoming vrf blue has a route to the
+# outgoing vrf red for the n2 network but red doesn't have a route back to n1.
+# Route from h2 to h1 goes through r2.
+#
+# The objective is to check that the incoming vrf routing table is selected
+# to send an ICMP error back to the source when the ttl of a packet reaches 1
+# while it is forwarded between different vrfs.
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+DEFAULT_TTYPE=sym
+
+H1_N1=172.16.1.0/24
+H1_N1_6=2001:db8:16:1::/64
+
+H1_N1_IP=172.16.1.1
+R1_N1_IP=172.16.1.253
+R2_N1_IP=172.16.1.254
+
+H1_N1_IP6=2001:db8:16:1::1
+R1_N1_IP6=2001:db8:16:1::253
+R2_N1_IP6=2001:db8:16:1::254
+
+H2_N2=172.16.2.0/24
+H2_N2_6=2001:db8:16:2::/64
+
+H2_N2_IP=172.16.2.2
+R1_N2_IP=172.16.2.253
+R2_N2_IP=172.16.2.254
+
+H2_N2_IP6=2001:db8:16:2::2
+R1_N2_IP6=2001:db8:16:2::253
+R2_N2_IP6=2001:db8:16:2::254
+
+################################################################################
+# helpers
+
+log_section()
+{
+	echo
+	echo "###########################################################################"
+	echo "$*"
+	echo "###########################################################################"
+	echo
+}
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ "${rc}" -eq "${expected}" ]; then
+		printf "TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read -r a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+run_cmd()
+{
+	local cmd="$*"
+	local out
+	local rc
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo "COMMAND: $cmd"
+	fi
+
+	# shellcheck disable=SC2086
+	out=$(eval $cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" ] && [ -n "$out" ]; then
+		echo "$out"
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+run_cmd_grep()
+{
+	local grep_pattern="$1"
+	shift
+	local cmd="$*"
+	local out
+	local rc
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo "COMMAND: $cmd"
+	fi
+
+	# shellcheck disable=SC2086
+	out=$(eval $cmd 2>&1)
+	if [ "$VERBOSE" = "1" ] && [ -n "$out" ]; then
+		echo "$out"
+	fi
+
+	echo "$out" | grep -q "$grep_pattern"
+	rc=$?
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+################################################################################
+# setup and teardown
+
+cleanup()
+{
+	local ns
+
+	for ns in h1 h2 r1 r2; do
+		ip netns del $ns 2>/dev/null
+	done
+}
+
+setup_vrf()
+{
+	local ns=$1
+
+	ip -netns "${ns}" rule del pref 0
+	ip -netns "${ns}" rule add pref 32765 from all lookup local
+	ip -netns "${ns}" -6 rule del pref 0
+	ip -netns "${ns}" -6 rule add pref 32765 from all lookup local
+}
+
+create_vrf()
+{
+	local ns=$1
+	local vrf=$2
+	local table=$3
+
+	ip -netns "${ns}" link add "${vrf}" type vrf table "${table}"
+	ip -netns "${ns}" link set "${vrf}" up
+	ip -netns "${ns}" route add vrf "${vrf}" unreachable default metric 8192
+	ip -netns "${ns}" -6 route add vrf "${vrf}" unreachable default metric 8192
+
+	ip -netns "${ns}" addr add 127.0.0.1/8 dev "${vrf}"
+	ip -netns "${ns}" -6 addr add ::1 dev "${vrf}" nodad
+}
+
+setup_sym()
+{
+	local ns
+
+	# make sure we are starting with a clean slate
+	cleanup
+
+	#
+	# create nodes as namespaces
+	#
+	for ns in h1 h2 r1; do
+		ip netns add $ns
+		ip -netns $ns link set lo up
+
+		case "${ns}" in
+		h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
+		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
+			;;
+		r1)    ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
+		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
+		esac
+	done
+
+	#
+	# create interconnects
+	#
+	ip -netns h1 link add eth0 type veth peer name r1h1
+	ip -netns h1 link set r1h1 netns r1 name eth0 up
+
+	ip -netns h2 link add eth0 type veth peer name r1h2
+	ip -netns h2 link set r1h2 netns r1 name eth1 up
+
+	#
+	# h1
+	#
+	ip -netns h1 addr add dev eth0 ${H1_N1_IP}/24
+	ip -netns h1 -6 addr add dev eth0 ${H1_N1_IP6}/64 nodad
+	ip -netns h1 link set eth0 up
+
+	# h1 to h2 via r1
+	ip -netns h1    route add ${H2_N2} via ${R1_N1_IP} dev eth0
+	ip -netns h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev eth0
+
+	#
+	# h2
+	#
+	ip -netns h2 addr add dev eth0 ${H2_N2_IP}/24
+	ip -netns h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad
+	ip -netns h2 link set eth0 up
+
+	# h2 to h1 via r1
+	ip -netns h2 route add default via ${R1_N2_IP} dev eth0
+	ip -netns h2 -6 route add default via ${R1_N2_IP6} dev eth0
+
+	#
+	# r1
+	#
+	setup_vrf r1
+	create_vrf r1 blue 1101
+	create_vrf r1 red 1102
+	ip -netns r1 link set mtu 1400 dev eth1
+	ip -netns r1 link set eth0 vrf blue up
+	ip -netns r1 link set eth1 vrf red up
+	ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24
+	ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
+	ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24
+	ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
+
+	# Route leak from blue to red
+	ip -netns r1 route add vrf blue ${H2_N2} dev red
+	ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red
+
+	# Route leak from red to blue
+	ip -netns r1 route add vrf red ${H1_N1} dev blue
+	ip -netns r1 -6 route add vrf red ${H1_N1_6} dev blue
+
+
+	# Wait for ip config to settle
+	sleep 2
+}
+
+setup_asym()
+{
+	local ns
+
+	# make sure we are starting with a clean slate
+	cleanup
+
+	#
+	# create nodes as namespaces
+	#
+	for ns in h1 h2 r1 r2; do
+		ip netns add $ns
+		ip -netns $ns link set lo up
+
+		case "${ns}" in
+		h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0
+		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1
+			;;
+		r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
+		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
+		esac
+	done
+
+	#
+	# create interconnects
+	#
+	ip -netns h1 link add eth0 type veth peer name r1h1
+	ip -netns h1 link set r1h1 netns r1 name eth0 up
+
+	ip -netns h1 link add eth1 type veth peer name r2h1
+	ip -netns h1 link set r2h1 netns r2 name eth0 up
+
+	ip -netns h2 link add eth0 type veth peer name r1h2
+	ip -netns h2 link set r1h2 netns r1 name eth1 up
+
+	ip -netns h2 link add eth1 type veth peer name r2h2
+	ip -netns h2 link set r2h2 netns r2 name eth1 up
+
+	#
+	# h1
+	#
+	ip -netns h1 link add br0 type bridge
+	ip -netns h1 link set br0 up
+	ip -netns h1 addr add dev br0 ${H1_N1_IP}/24
+	ip -netns h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad
+	ip -netns h1 link set eth0 master br0 up
+	ip -netns h1 link set eth1 master br0 up
+
+	# h1 to h2 via r1
+	ip -netns h1    route add ${H2_N2} via ${R1_N1_IP} dev br0
+	ip -netns h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev br0
+
+	#
+	# h2
+	#
+	ip -netns h2 link add br0 type bridge
+	ip -netns h2 link set br0 up
+	ip -netns h2 addr add dev br0 ${H2_N2_IP}/24
+	ip -netns h2 -6 addr add dev br0 ${H2_N2_IP6}/64 nodad
+	ip -netns h2 link set eth0 master br0 up
+	ip -netns h2 link set eth1 master br0 up
+
+	# h2 to h1 via r2
+	ip -netns h2 route add default via ${R2_N2_IP} dev br0
+	ip -netns h2 -6 route add default via ${R2_N2_IP6} dev br0
+
+	#
+	# r1
+	#
+	setup_vrf r1
+	create_vrf r1 blue 1101
+	create_vrf r1 red 1102
+	ip -netns r1 link set mtu 1400 dev eth1
+	ip -netns r1 link set eth0 vrf blue up
+	ip -netns r1 link set eth1 vrf red up
+	ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24
+	ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad
+	ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24
+	ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
+
+	# Route leak from blue to red
+	ip -netns r1 route add vrf blue ${H2_N2} dev red
+	ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red
+
+	# No route leak from red to blue
+
+	#
+	# r2
+	#
+	ip -netns r2 addr add dev eth0 ${R2_N1_IP}/24
+	ip -netns r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad
+	ip -netns r2 addr add dev eth1 ${R2_N2_IP}/24
+	ip -netns r2 -6 addr add dev eth1 ${R2_N2_IP6}/64 nodad
+
+	# Wait for ip config to settle
+	sleep 2
+}
+
+check_connectivity()
+{
+	ip netns exec h1 ping -c1 -w1 ${H2_N2_IP} >/dev/null 2>&1
+	log_test $? 0 "Basic IPv4 connectivity"
+	return $?
+}
+
+check_connectivity6()
+{
+	ip netns exec h1 "${ping6}" -c1 -w1 ${H2_N2_IP6} >/dev/null 2>&1
+	log_test $? 0 "Basic IPv6 connectivity"
+	return $?
+}
+
+check_traceroute()
+{
+	if [ ! -x "$(command -v traceroute)" ]; then
+		echo "SKIP: Could not run IPV4 test without traceroute"
+		return 1
+	fi
+}
+
+check_traceroute6()
+{
+	if [ ! -x "$(command -v traceroute6)" ]; then
+		echo "SKIP: Could not run IPV6 test without traceroute6"
+		return 1
+	fi
+}
+
+ipv4_traceroute()
+{
+	local ttype="$1"
+
+	[ "x$ttype" = "x" ] && ttype="$DEFAULT_TTYPE"
+
+	log_section "IPv4 ($ttype route): VRF ICMP error route lookup traceroute"
+
+	check_traceroute || return
+
+	setup_"$ttype"
+
+	check_connectivity || return
+
+	run_cmd_grep "${R1_N1_IP}" ip netns exec h1 traceroute ${H2_N2_IP}
+	log_test $? 0 "Traceroute reports a hop on r1"
+}
+
+ipv4_traceroute_asym()
+{
+	ipv4_traceroute asym
+}
+
+ipv6_traceroute()
+{
+	local ttype="$1"
+
+	[ "x$ttype" = "x" ] && ttype="$DEFAULT_TTYPE"
+
+	log_section "IPv6 ($ttype route): VRF ICMP error route lookup traceroute"
+
+	check_traceroute6 || return
+
+	setup_"$ttype"
+
+	check_connectivity6 || return
+
+	run_cmd_grep "${R1_N1_IP6}" ip netns exec h1 traceroute6 ${H2_N2_IP6}
+	log_test $? 0 "Traceroute6 reports a hop on r1"
+}
+
+ipv6_traceroute_asym()
+{
+	ipv6_traceroute asym
+}
+
+ipv4_ping_ttl()
+{
+	local ttype="$1"
+
+	[ "x$ttype" = "x" ] && ttype="$DEFAULT_TTYPE"
+
+	log_section "IPv4 ($ttype route): VRF ICMP ttl error route lookup ping"
+
+	setup_"$ttype"
+
+	check_connectivity || return
+
+	run_cmd_grep "Time to live exceeded" ip netns exec h1 ping -t1 -c1 -W2 ${H2_N2_IP}
+	log_test $? 0 "Ping received ICMP ttl exceeded"
+}
+
+ipv4_ping_ttl_asym()
+{
+	ipv4_ping_ttl asym
+}
+
+ipv4_ping_frag()
+{
+	local ttype="$1"
+
+	[ "x$ttype" = "x" ] && ttype="$DEFAULT_TTYPE"
+
+	log_section "IPv4 ($ttype route): VRF ICMP fragmentation error route lookup ping"
+
+	setup_"$ttype"
+
+	check_connectivity || return
+
+	run_cmd_grep "Frag needed" ip netns exec h1 ping -s 1450 -Mdo -c1 -W2 ${H2_N2_IP}
+	log_test $? 0 "Ping received ICMP Frag needed"
+}
+
+ipv4_ping_frag_asym()
+{
+	ipv4_ping_frag asym
+}
+
+ipv6_ping_ttl()
+{
+	local ttype="$1"
+
+	[ "x$ttype" = "x" ] && ttype="$DEFAULT_TTYPE"
+
+	log_section "IPv6 ($ttype route): VRF ICMP ttl error route lookup ping"
+
+	setup_"$ttype"
+
+	check_connectivity6 || return
+
+	run_cmd_grep "Time exceeded: Hop limit" ip netns exec h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6}
+	log_test $? 0 "Ping received ICMP Hop limit"
+}
+
+ipv6_ping_ttl_asym()
+{
+	ipv6_ping_ttl asym
+}
+
+ipv6_ping_frag()
+{
+	local ttype="$1"
+
+	[ "x$ttype" = "x" ] && ttype="$DEFAULT_TTYPE"
+
+	log_section "IPv6 ($ttype route): VRF ICMP fragmentation error route lookup ping"
+
+	setup_"$ttype"
+
+	check_connectivity6 || return
+
+	run_cmd_grep "Packet too big" ip netns exec h1 "${ping6}" -s 1450 -Mdo -c1 -W2 ${H2_N2_IP6}
+	log_test $? 0 "Ping received ICMP Packet too big"
+}
+
+ipv6_ping_frag_asym()
+{
+	ipv6_ping_frag asym
+}
+
+################################################################################
+# usage
+
+usage()
+{
+        cat <<EOF
+usage: ${0##*/} OPTS
+
+	-4          Run IPv4 tests only
+	-6          Run IPv6 tests only
+        -t TEST     Run only TEST
+	-p          Pause on fail
+	-v          verbose mode (show commands and output)
+EOF
+}
+
+################################################################################
+# main
+
+# Some systems don't have a ping6 binary anymore
+command -v ping6 > /dev/null 2>&1 && ping6=$(command -v ping6) || ping6=$(command -v ping)
+
+TESTS_IPV4="ipv4_ping_ttl ipv4_traceroute ipv4_ping_frag ipv4_ping_ttl_asym ipv4_traceroute_asym"
+TESTS_IPV6="ipv6_ping_ttl ipv6_traceroute ipv6_ping_frag ipv6_ping_ttl_asym ipv6_traceroute_asym"
+
+ret=0
+nsuccess=0
+nfail=0
+
+while getopts :46t:pvh o
+do
+	case $o in
+		4) TESTS=ipv4;;
+		6) TESTS=ipv6;;
+		t) TESTS=$OPTARG;;
+		p) PAUSE_ON_FAIL=yes;;
+		v) VERBOSE=1;;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+#
+# show user test config
+#
+if [ -z "$TESTS" ]; then
+        TESTS="$TESTS_IPV4 $TESTS_IPV6"
+elif [ "$TESTS" = "ipv4" ]; then
+        TESTS="$TESTS_IPV4"
+elif [ "$TESTS" = "ipv6" ]; then
+        TESTS="$TESTS_IPV6"
+fi
+
+for t in $TESTS
+do
+	case $t in
+	ipv4_ping_ttl|ping)              ipv4_ping_ttl;;&
+	ipv4_ping_ttl_asym|ping)         ipv4_ping_ttl_asym;;&
+	ipv4_traceroute|traceroute)      ipv4_traceroute;;&
+	ipv4_traceroute_asym|traceroute) ipv4_traceroute_asym;;&
+	ipv4_ping_frag|ping)             ipv4_ping_frag;;&
+
+	ipv6_ping_ttl|ping)              ipv6_ping_ttl;;&
+	ipv6_ping_ttl_asym|ping)         ipv6_ping_ttl_asym;;&
+	ipv6_traceroute|traceroute)      ipv6_traceroute;;&
+	ipv6_traceroute_asym|traceroute) ipv6_traceroute_asym;;&
+	ipv6_ping_frag|ping)             ipv6_ping_frag;;&
+
+	# setup namespaces and config, but do not run any tests
+	setup_sym|setup)                 setup_sym; exit 0;;
+	setup_asym)                      setup_asym; exit 0;;
+
+	help)                       echo "Test names: $TESTS"; exit 0;;
+	esac
+done
+
+cleanup
+
+printf "\nTests passed: %3d\n" ${nsuccess}
+printf "Tests failed: %3d\n"   ${nfail}
+
+exit $ret
diff --git a/tools/testing/selftests/net/vrf_strict_mode_test.sh b/tools/testing/selftests/net/vrf_strict_mode_test.sh
new file mode 100755
index 000000000..18b982d61
--- /dev/null
+++ b/tools/testing/selftests/net/vrf_strict_mode_test.sh
@@ -0,0 +1,396 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is designed for testing the new VRF strict_mode functionality.
+
+ret=0
+
+# identifies the "init" network namespace which is often called root network
+# namespace.
+INIT_NETNS_NAME="init"
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		nsuccess=$((nsuccess+1))
+		printf "\n    TEST: %-60s  [ OK ]\n" "${msg}"
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "\n    TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+print_log_test_results()
+{
+	if [ "$TESTS" != "none" ]; then
+		printf "\nTests passed: %3d\n" ${nsuccess}
+		printf "Tests failed: %3d\n"   ${nfail}
+	fi
+}
+
+log_section()
+{
+	echo
+	echo "################################################################################"
+	echo "TEST SECTION: $*"
+	echo "################################################################################"
+}
+
+ip_expand_args()
+{
+	local nsname=$1
+	local nsarg=""
+
+	if [ "${nsname}" != "${INIT_NETNS_NAME}" ]; then
+		nsarg="-netns ${nsname}"
+	fi
+
+	echo "${nsarg}"
+}
+
+vrf_count()
+{
+	local nsname=$1
+	local nsarg="$(ip_expand_args ${nsname})"
+
+	ip ${nsarg} -o link show type vrf | wc -l
+}
+
+count_vrf_by_table_id()
+{
+	local nsname=$1
+	local tableid=$2
+	local nsarg="$(ip_expand_args ${nsname})"
+
+	ip ${nsarg} -d -o link show type vrf | grep "table ${tableid}" | wc -l
+}
+
+add_vrf()
+{
+	local nsname=$1
+	local vrfname=$2
+	local vrftable=$3
+	local nsarg="$(ip_expand_args ${nsname})"
+
+	ip ${nsarg} link add ${vrfname} type vrf table ${vrftable} &>/dev/null
+}
+
+add_vrf_and_check()
+{
+	local nsname=$1
+	local vrfname=$2
+	local vrftable=$3
+	local cnt
+	local rc
+
+	add_vrf ${nsname} ${vrfname} ${vrftable}; rc=$?
+
+	cnt=$(count_vrf_by_table_id ${nsname} ${vrftable})
+
+	log_test ${rc} 0 "${nsname}: add vrf ${vrfname}, ${cnt} vrfs for table ${vrftable}"
+}
+
+add_vrf_and_check_fail()
+{
+	local nsname=$1
+	local vrfname=$2
+	local vrftable=$3
+	local cnt
+	local rc
+
+	add_vrf ${nsname} ${vrfname} ${vrftable}; rc=$?
+
+	cnt=$(count_vrf_by_table_id ${nsname} ${vrftable})
+
+	log_test ${rc} 2 "${nsname}: CANNOT add vrf ${vrfname}, ${cnt} vrfs for table ${vrftable}"
+}
+
+del_vrf_and_check()
+{
+	local nsname=$1
+	local vrfname=$2
+	local nsarg="$(ip_expand_args ${nsname})"
+
+	ip ${nsarg} link del ${vrfname}
+	log_test $? 0 "${nsname}: remove vrf ${vrfname}"
+}
+
+config_vrf_and_check()
+{
+	local nsname=$1
+	local addr=$2
+	local vrfname=$3
+	local nsarg="$(ip_expand_args ${nsname})"
+
+	ip ${nsarg} link set dev ${vrfname} up && \
+		ip ${nsarg} addr add ${addr} dev ${vrfname}
+	log_test $? 0 "${nsname}: vrf ${vrfname} up, addr ${addr}"
+}
+
+read_strict_mode()
+{
+	local nsname=$1
+	local rval
+	local rc=0
+	local nsexec=""
+
+	if [ "${nsname}" != "${INIT_NETNS_NAME}" ]; then
+		# a custom network namespace is provided
+		nsexec="ip netns exec ${nsname}"
+	fi
+
+	rval="$(${nsexec} bash -c "cat /proc/sys/net/vrf/strict_mode" | \
+		grep -E "^[0-1]$")" &> /dev/null
+	if [ $? -ne 0 ]; then
+		# set errors
+		rval=255
+		rc=1
+	fi
+
+	# on success, rval can be only 0 or 1; on error, rval is equal to 255
+	echo ${rval}
+	return ${rc}
+}
+
+read_strict_mode_compare_and_check()
+{
+	local nsname=$1
+	local expected=$2
+	local res
+
+	res="$(read_strict_mode ${nsname})"
+	log_test ${res} ${expected} "${nsname}: check strict_mode=${res}"
+}
+
+set_strict_mode()
+{
+	local nsname=$1
+	local val=$2
+	local nsexec=""
+
+	if [ "${nsname}" != "${INIT_NETNS_NAME}" ]; then
+		# a custom network namespace is provided
+		nsexec="ip netns exec ${nsname}"
+	fi
+
+	${nsexec} bash -c "echo ${val} >/proc/sys/net/vrf/strict_mode" &>/dev/null
+}
+
+enable_strict_mode()
+{
+	local nsname=$1
+
+	set_strict_mode ${nsname} 1
+}
+
+disable_strict_mode()
+{
+	local nsname=$1
+
+	set_strict_mode ${nsname} 0
+}
+
+disable_strict_mode_and_check()
+{
+	local nsname=$1
+
+	disable_strict_mode ${nsname}
+	log_test $? 0 "${nsname}: disable strict_mode (=0)"
+}
+
+enable_strict_mode_and_check()
+{
+	local nsname=$1
+
+	enable_strict_mode ${nsname}
+	log_test $? 0 "${nsname}: enable strict_mode (=1)"
+}
+
+enable_strict_mode_and_check_fail()
+{
+	local nsname=$1
+
+	enable_strict_mode ${nsname}
+	log_test $? 1 "${nsname}: CANNOT enable strict_mode"
+}
+
+strict_mode_check_default()
+{
+	local nsname=$1
+	local strictmode
+	local vrfcnt
+
+	vrfcnt=$(vrf_count ${nsname})
+	strictmode=$(read_strict_mode ${nsname})
+	log_test ${strictmode} 0 "${nsname}: strict_mode=0 by default, ${vrfcnt} vrfs"
+}
+
+setup()
+{
+	modprobe vrf
+
+	ip netns add testns
+	ip netns exec testns ip link set lo up
+}
+
+cleanup()
+{
+	ip netns del testns 2>/dev/null
+
+	ip link del vrf100 2>/dev/null
+	ip link del vrf101 2>/dev/null
+	ip link del vrf102 2>/dev/null
+
+	echo 0 >/proc/sys/net/vrf/strict_mode 2>/dev/null
+}
+
+vrf_strict_mode_tests_init()
+{
+	vrf_strict_mode_check_support init
+
+	strict_mode_check_default init
+
+	add_vrf_and_check init vrf100 100
+	config_vrf_and_check init 172.16.100.1/24 vrf100
+
+	enable_strict_mode_and_check init
+
+	add_vrf_and_check_fail init vrf101 100
+
+	disable_strict_mode_and_check init
+
+	add_vrf_and_check init vrf101 100
+	config_vrf_and_check init 172.16.101.1/24 vrf101
+
+	enable_strict_mode_and_check_fail init
+
+	del_vrf_and_check init vrf101
+
+	enable_strict_mode_and_check init
+
+	add_vrf_and_check init vrf102 102
+	config_vrf_and_check init 172.16.102.1/24 vrf102
+
+	# the strict_modle is enabled in the init
+}
+
+vrf_strict_mode_tests_testns()
+{
+	vrf_strict_mode_check_support testns
+
+	strict_mode_check_default testns
+
+	enable_strict_mode_and_check testns
+
+	add_vrf_and_check testns vrf100 100
+	config_vrf_and_check testns 10.0.100.1/24 vrf100
+
+	add_vrf_and_check_fail testns vrf101 100
+
+	add_vrf_and_check_fail testns vrf102 100
+
+	add_vrf_and_check testns vrf200 200
+
+	disable_strict_mode_and_check testns
+
+	add_vrf_and_check testns vrf101 100
+
+	add_vrf_and_check testns vrf102 100
+
+	#the strict_mode is disabled in the testns
+}
+
+vrf_strict_mode_tests_mix()
+{
+	read_strict_mode_compare_and_check init 1
+
+	read_strict_mode_compare_and_check testns 0
+
+	del_vrf_and_check testns vrf101
+
+	del_vrf_and_check testns vrf102
+
+	disable_strict_mode_and_check init
+
+	enable_strict_mode_and_check testns
+
+	enable_strict_mode_and_check init
+	enable_strict_mode_and_check init
+
+	disable_strict_mode_and_check testns
+	disable_strict_mode_and_check testns
+
+	read_strict_mode_compare_and_check init 1
+
+	read_strict_mode_compare_and_check testns 0
+}
+
+vrf_strict_mode_tests()
+{
+	log_section "VRF strict_mode test on init network namespace"
+	vrf_strict_mode_tests_init
+
+	log_section "VRF strict_mode test on testns network namespace"
+	vrf_strict_mode_tests_testns
+
+	log_section "VRF strict_mode test mixing init and testns network namespaces"
+	vrf_strict_mode_tests_mix
+}
+
+vrf_strict_mode_check_support()
+{
+	local nsname=$1
+	local output
+	local rc
+
+	output="$(lsmod | grep '^vrf' | awk '{print $1}')"
+	if [ -z "${output}" ]; then
+		modinfo vrf || return $?
+	fi
+
+	# we do not care about the value of the strict_mode; we only check if
+	# the strict_mode parameter is available or not.
+	read_strict_mode ${nsname} &>/dev/null; rc=$?
+	log_test ${rc} 0 "${nsname}: net.vrf.strict_mode is available"
+
+	return ${rc}
+}
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit 0
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit 0
+fi
+
+modprobe vrf &>/dev/null
+if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
+	echo "SKIP: vrf sysctl does not exist"
+	exit 0
+fi
+
+cleanup &> /dev/null
+
+setup
+vrf_strict_mode_tests
+cleanup
+
+print_log_test_results
+
+exit $ret
diff --git a/tools/testing/selftests/net/xfrm_policy.sh b/tools/testing/selftests/net/xfrm_policy.sh
new file mode 100755
index 000000000..bdf450eaf
--- /dev/null
+++ b/tools/testing/selftests/net/xfrm_policy.sh
@@ -0,0 +1,486 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Check xfrm policy resolution.  Topology:
+#
+# 1.2   1.1   3.1  3.10    2.1   2.2
+# eth1  eth1 veth0 veth0 eth1   eth1
+# ns1 ---- ns3 ----- ns4 ---- ns2
+#
+# ns3 and ns4 are connected via ipsec tunnel.
+# pings from ns1 to ns2 (and vice versa) are supposed to work like this:
+# ns1: ping 10.0.2.2: passes via ipsec tunnel.
+# ns2: ping 10.0.1.2: passes via ipsec tunnel.
+
+# ns1: ping 10.0.1.253: passes via ipsec tunnel (direct policy)
+# ns2: ping 10.0.2.253: passes via ipsec tunnel (direct policy)
+#
+# ns1: ping 10.0.2.254: does NOT pass via ipsec tunnel (exception)
+# ns2: ping 10.0.1.254: does NOT pass via ipsec tunnel (exception)
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+policy_checks_ok=1
+
+KEY_SHA=0xdeadbeef1234567890abcdefabcdefabcdefabcd
+KEY_AES=0x0123456789abcdef0123456789012345
+SPI1=0x1
+SPI2=0x2
+
+do_esp_policy() {
+    local ns=$1
+    local me=$2
+    local remote=$3
+    local lnet=$4
+    local rnet=$5
+
+    # to encrypt packets as they go out (includes forwarded packets that need encapsulation)
+    ip -net $ns xfrm policy add src $lnet dst $rnet dir out tmpl src $me dst $remote proto esp mode tunnel priority 100 action allow
+    # to fwd decrypted packets after esp processing:
+    ip -net $ns xfrm policy add src $rnet dst $lnet dir fwd tmpl src $remote dst $me proto esp mode tunnel priority 100 action allow
+}
+
+do_esp() {
+    local ns=$1
+    local me=$2
+    local remote=$3
+    local lnet=$4
+    local rnet=$5
+    local spi_out=$6
+    local spi_in=$7
+
+    ip -net $ns xfrm state add src $remote dst $me proto esp spi $spi_in  enc aes $KEY_AES  auth sha1 $KEY_SHA  mode tunnel sel src $rnet dst $lnet
+    ip -net $ns xfrm state add src $me  dst $remote proto esp spi $spi_out enc aes $KEY_AES auth sha1 $KEY_SHA mode tunnel sel src $lnet dst $rnet
+
+    do_esp_policy $ns $me $remote $lnet $rnet
+}
+
+# add policies with different netmasks, to make sure kernel carries
+# the policies contained within new netmask over when search tree is
+# re-built.
+# peer netns that are supposed to be encapsulated via esp have addresses
+# in the 10.0.1.0/24 and 10.0.2.0/24 subnets, respectively.
+#
+# Adding a policy for '10.0.1.0/23' will make it necessary to
+# alter the prefix of 10.0.1.0 subnet.
+# In case new prefix overlaps with existing node, the node and all
+# policies it carries need to be merged with the existing one(s).
+#
+# Do that here.
+do_overlap()
+{
+    local ns=$1
+
+    # adds new nodes to tree (neither network exists yet in policy database).
+    ip -net $ns xfrm policy add src 10.1.0.0/24 dst 10.0.0.0/24 dir fwd priority 200 action block
+
+    # adds a new node in the 10.0.0.0/24 tree (dst node exists).
+    ip -net $ns xfrm policy add src 10.2.0.0/24 dst 10.0.0.0/24 dir fwd priority 200 action block
+
+    # adds a 10.2.0.0/23 node, but for different dst.
+    ip -net $ns xfrm policy add src 10.2.0.0/23 dst 10.0.1.0/24 dir fwd priority 200 action block
+
+    # dst now overlaps with the 10.0.1.0/24 ESP policy in fwd.
+    # kernel must 'promote' existing one (10.0.0.0/24) to 10.0.0.0/23.
+    # But 10.0.0.0/23 also includes existing 10.0.1.0/24, so that node
+    # also has to be merged too, including source-sorted subtrees.
+    # old:
+    # 10.0.0.0/24 (node 1 in dst tree of the bin)
+    #    10.1.0.0/24 (node in src tree of dst node 1)
+    #    10.2.0.0/24 (node in src tree of dst node 1)
+    # 10.0.1.0/24 (node 2 in dst tree of the bin)
+    #    10.0.2.0/24 (node in src tree of dst node 2)
+    #    10.2.0.0/24 (node in src tree of dst node 2)
+    #
+    # The next 'policy add' adds dst '10.0.0.0/23', which means
+    # that dst node 1 and dst node 2 have to be merged including
+    # the sub-tree.  As no duplicates are allowed, policies in
+    # the two '10.0.2.0/24' are also merged.
+    #
+    # after the 'add', internal search tree should look like this:
+    # 10.0.0.0/23 (node in dst tree of bin)
+    #     10.0.2.0/24 (node in src tree of dst node)
+    #     10.1.0.0/24 (node in src tree of dst node)
+    #     10.2.0.0/24 (node in src tree of dst node)
+    #
+    # 10.0.0.0/24 and 10.0.1.0/24 nodes have been merged as 10.0.0.0/23.
+    ip -net $ns xfrm policy add src 10.1.0.0/24 dst 10.0.0.0/23 dir fwd priority 200 action block
+
+    # similar to above: add policies (with partially random address), with shrinking prefixes.
+    for p in 29 28 27;do
+      for k in $(seq 1 32); do
+       ip -net $ns xfrm policy add src 10.253.1.$((RANDOM%255))/$p dst 10.254.1.$((RANDOM%255))/$p dir fwd priority $((200+k)) action block 2>/dev/null
+      done
+    done
+}
+
+do_esp_policy_get_check() {
+    local ns=$1
+    local lnet=$2
+    local rnet=$3
+
+    ip -net $ns xfrm policy get src $lnet dst $rnet dir out > /dev/null
+    if [ $? -ne 0 ] && [ $policy_checks_ok -eq 1 ] ;then
+        policy_checks_ok=0
+        echo "FAIL: ip -net $ns xfrm policy get src $lnet dst $rnet dir out"
+        ret=1
+    fi
+
+    ip -net $ns xfrm policy get src $rnet dst $lnet dir fwd > /dev/null
+    if [ $? -ne 0 ] && [ $policy_checks_ok -eq 1 ] ;then
+        policy_checks_ok=0
+        echo "FAIL: ip -net $ns xfrm policy get src $rnet dst $lnet dir fwd"
+        ret=1
+    fi
+}
+
+do_exception() {
+    local ns=$1
+    local me=$2
+    local remote=$3
+    local encryptip=$4
+    local plain=$5
+
+    # network $plain passes without tunnel
+    ip -net $ns xfrm policy add dst $plain dir out priority 10 action allow
+
+    # direct policy for $encryptip, use tunnel, higher prio takes precedence
+    ip -net $ns xfrm policy add dst $encryptip dir out tmpl src $me dst $remote proto esp mode tunnel priority 1 action allow
+}
+
+# policies that are not supposed to match any packets generated in this test.
+do_dummies4() {
+    local ns=$1
+
+    for i in $(seq 10 16);do
+      # dummy policy with wildcard src/dst.
+      echo netns exec $ns ip xfrm policy add src 0.0.0.0/0 dst 10.$i.99.0/30 dir out action block
+      echo netns exec $ns ip xfrm policy add src 10.$i.99.0/30 dst 0.0.0.0/0 dir out action block
+      for j in $(seq 32 64);do
+        echo netns exec $ns ip xfrm policy add src 10.$i.1.0/30 dst 10.$i.$j.0/30 dir out action block
+        # silly, as it encompasses the one above too, but its allowed:
+        echo netns exec $ns ip xfrm policy add src 10.$i.1.0/29 dst 10.$i.$j.0/29 dir out action block
+        # and yet again, even more broad one.
+        echo netns exec $ns ip xfrm policy add src 10.$i.1.0/24 dst 10.$i.$j.0/24 dir out action block
+        echo netns exec $ns ip xfrm policy add src 10.$i.$j.0/24 dst 10.$i.1.0/24 dir fwd action block
+      done
+    done | ip -batch /dev/stdin
+}
+
+do_dummies6() {
+    local ns=$1
+
+    for i in $(seq 10 16);do
+      for j in $(seq 32 64);do
+       echo netns exec $ns ip xfrm policy add src dead:$i::/64 dst dead:$i:$j::/64 dir out action block
+       echo netns exec $ns ip xfrm policy add src dead:$i:$j::/64 dst dead:$i::/24 dir fwd action block
+      done
+    done | ip -batch /dev/stdin
+}
+
+check_ipt_policy_count()
+{
+	ns=$1
+
+	ip netns exec $ns iptables-save -c |grep policy | ( read c rest
+		ip netns exec $ns iptables -Z
+		if [ x"$c" = x'[0:0]' ]; then
+			exit 0
+		elif [ x"$c" = x ]; then
+			echo "ERROR: No counters"
+			ret=1
+			exit 111
+		else
+			exit 1
+		fi
+	)
+}
+
+check_xfrm() {
+	# 0: iptables -m policy rule count == 0
+	# 1: iptables -m policy rule count != 0
+	rval=$1
+	ip=$2
+	local lret=0
+
+	ip netns exec ns1 ping -q -c 1 10.0.2.$ip > /dev/null
+
+	check_ipt_policy_count ns3
+	if [ $? -ne $rval ] ; then
+		lret=1
+	fi
+	check_ipt_policy_count ns4
+	if [ $? -ne $rval ] ; then
+		lret=1
+	fi
+
+	ip netns exec ns2 ping -q -c 1 10.0.1.$ip > /dev/null
+
+	check_ipt_policy_count ns3
+	if [ $? -ne $rval ] ; then
+		lret=1
+	fi
+	check_ipt_policy_count ns4
+	if [ $? -ne $rval ] ; then
+		lret=1
+	fi
+
+	return $lret
+}
+
+check_exceptions()
+{
+	logpostfix="$1"
+	local lret=0
+
+	# ping to .254 should be excluded from the tunnel (exception is in place).
+	check_xfrm 0 254
+	if [ $? -ne 0 ]; then
+		echo "FAIL: expected ping to .254 to fail ($logpostfix)"
+		lret=1
+	else
+		echo "PASS: ping to .254 bypassed ipsec tunnel ($logpostfix)"
+	fi
+
+	# ping to .253 should use use ipsec due to direct policy exception.
+	check_xfrm 1 253
+	if [ $? -ne 0 ]; then
+		echo "FAIL: expected ping to .253 to use ipsec tunnel ($logpostfix)"
+		lret=1
+	else
+		echo "PASS: direct policy matches ($logpostfix)"
+	fi
+
+	# ping to .2 should use ipsec.
+	check_xfrm 1 2
+	if [ $? -ne 0 ]; then
+		echo "FAIL: expected ping to .2 to use ipsec tunnel ($logpostfix)"
+		lret=1
+	else
+		echo "PASS: policy matches ($logpostfix)"
+	fi
+
+	return $lret
+}
+
+check_hthresh_repeat()
+{
+	local log=$1
+	i=0
+
+	for i in $(seq 1 10);do
+		ip -net ns1 xfrm policy update src e000:0001::0000 dst ff01::0014:0000:0001 dir in tmpl src :: dst :: proto esp mode tunnel priority 100 action allow || break
+		ip -net ns1 xfrm policy set hthresh6 0 28 || break
+
+		ip -net ns1 xfrm policy update src e000:0001::0000 dst ff01::01 dir in tmpl src :: dst :: proto esp mode tunnel priority 100 action allow || break
+		ip -net ns1 xfrm policy set hthresh6 0 28 || break
+	done
+
+	if [ $i -ne 10 ] ;then
+		echo "FAIL: $log" 1>&2
+		ret=1
+		return 1
+	fi
+
+	echo "PASS: $log"
+	return 0
+}
+
+# insert non-overlapping policies in a random order and check that
+# all of them can be fetched using the traffic selectors.
+check_random_order()
+{
+	local ns=$1
+	local log=$2
+
+	for i in $(seq 100); do
+		ip -net $ns xfrm policy flush
+		for j in $(seq 0 16 255 | sort -R); do
+			ip -net $ns xfrm policy add dst $j.0.0.0/24 dir out priority 10 action allow
+		done
+		for j in $(seq 0 16 255); do
+			if ! ip -net $ns xfrm policy get dst $j.0.0.0/24 dir out > /dev/null; then
+				echo "FAIL: $log" 1>&2
+				return 1
+			fi
+		done
+	done
+
+	for i in $(seq 100); do
+		ip -net $ns xfrm policy flush
+		for j in $(seq 0 16 255 | sort -R); do
+			local addr=$(printf "e000:0000:%02x00::/56" $j)
+			ip -net $ns xfrm policy add dst $addr dir out priority 10 action allow
+		done
+		for j in $(seq 0 16 255); do
+			local addr=$(printf "e000:0000:%02x00::/56" $j)
+			if ! ip -net $ns xfrm policy get dst $addr dir out > /dev/null; then
+				echo "FAIL: $log" 1>&2
+				return 1
+			fi
+		done
+	done
+
+	ip -net $ns xfrm policy flush
+
+	echo "PASS: $log"
+	return 0
+}
+
+#check for needed privileges
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip
+fi
+
+ip -Version 2>/dev/null >/dev/null
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without the ip tool"
+	exit $ksft_skip
+fi
+
+# needed to check if policy lookup got valid ipsec result
+iptables --version 2>/dev/null >/dev/null
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without iptables tool"
+	exit $ksft_skip
+fi
+
+for i in 1 2 3 4; do
+    ip netns add ns$i
+    ip -net ns$i link set lo up
+done
+
+DEV=veth0
+ip link add $DEV netns ns1 type veth peer name eth1 netns ns3
+ip link add $DEV netns ns2 type veth peer name eth1 netns ns4
+
+ip link add $DEV netns ns3 type veth peer name veth0 netns ns4
+
+DEV=veth0
+for i in 1 2; do
+    ip -net ns$i link set $DEV up
+    ip -net ns$i addr add 10.0.$i.2/24 dev $DEV
+    ip -net ns$i addr add dead:$i::2/64 dev $DEV
+
+    ip -net ns$i addr add 10.0.$i.253 dev $DEV
+    ip -net ns$i addr add 10.0.$i.254 dev $DEV
+    ip -net ns$i addr add dead:$i::fd dev $DEV
+    ip -net ns$i addr add dead:$i::fe dev $DEV
+done
+
+for i in 3 4; do
+ip -net ns$i link set eth1 up
+ip -net ns$i link set veth0 up
+done
+
+ip -net ns1 route add default via 10.0.1.1
+ip -net ns2 route add default via 10.0.2.1
+
+ip -net ns3 addr add 10.0.1.1/24 dev eth1
+ip -net ns3 addr add 10.0.3.1/24 dev veth0
+ip -net ns3 addr add 2001:1::1/64 dev eth1
+ip -net ns3 addr add 2001:3::1/64 dev veth0
+
+ip -net ns3 route add default via 10.0.3.10
+
+ip -net ns4 addr add 10.0.2.1/24 dev eth1
+ip -net ns4 addr add 10.0.3.10/24 dev veth0
+ip -net ns4 addr add 2001:2::1/64 dev eth1
+ip -net ns4 addr add 2001:3::10/64 dev veth0
+ip -net ns4 route add default via 10.0.3.1
+
+for j in 4 6; do
+	for i in 3 4;do
+		ip netns exec ns$i sysctl net.ipv$j.conf.eth1.forwarding=1 > /dev/null
+		ip netns exec ns$i sysctl net.ipv$j.conf.veth0.forwarding=1 > /dev/null
+	done
+done
+
+# abuse iptables rule counter to check if ping matches a policy
+ip netns exec ns3 iptables -p icmp -A FORWARD -m policy --dir out --pol ipsec
+ip netns exec ns4 iptables -p icmp -A FORWARD -m policy --dir out --pol ipsec
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not insert iptables rule"
+	for i in 1 2 3 4;do ip netns del ns$i;done
+	exit $ksft_skip
+fi
+
+#          localip  remoteip  localnet    remotenet
+do_esp ns3 10.0.3.1 10.0.3.10 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2
+do_esp ns3 dead:3::1 dead:3::10 dead:1::/64 dead:2::/64 $SPI1 $SPI2
+do_esp ns4 10.0.3.10 10.0.3.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1
+do_esp ns4 dead:3::10 dead:3::1 dead:2::/64 dead:1::/64 $SPI2 $SPI1
+
+do_dummies4 ns3
+do_dummies6 ns4
+
+do_esp_policy_get_check ns3 10.0.1.0/24 10.0.2.0/24
+do_esp_policy_get_check ns4 10.0.2.0/24 10.0.1.0/24
+do_esp_policy_get_check ns3 dead:1::/64 dead:2::/64
+do_esp_policy_get_check ns4 dead:2::/64 dead:1::/64
+
+# ping to .254 should use ipsec, exception is not installed.
+check_xfrm 1 254
+if [ $? -ne 0 ]; then
+	echo "FAIL: expected ping to .254 to use ipsec tunnel"
+	ret=1
+else
+	echo "PASS: policy before exception matches"
+fi
+
+# installs exceptions
+#                localip  remoteip   encryptdst  plaindst
+do_exception ns3 10.0.3.1 10.0.3.10 10.0.2.253 10.0.2.240/28
+do_exception ns4 10.0.3.10 10.0.3.1 10.0.1.253 10.0.1.240/28
+
+do_exception ns3 dead:3::1 dead:3::10 dead:2::fd  dead:2:f0::/96
+do_exception ns4 dead:3::10 dead:3::1 dead:1::fd  dead:1:f0::/96
+
+check_exceptions "exceptions"
+if [ $? -ne 0 ]; then
+	ret=1
+fi
+
+# insert block policies with adjacent/overlapping netmasks
+do_overlap ns3
+
+check_exceptions "exceptions and block policies"
+if [ $? -ne 0 ]; then
+	ret=1
+fi
+
+for n in ns3 ns4;do
+	ip -net $n xfrm policy set hthresh4 28 24 hthresh6 126 125
+	sleep $((RANDOM%5))
+done
+
+check_exceptions "exceptions and block policies after hresh changes"
+
+# full flush of policy db, check everything gets freed incl. internal meta data
+ip -net ns3 xfrm policy flush
+
+do_esp_policy ns3 10.0.3.1 10.0.3.10 10.0.1.0/24 10.0.2.0/24
+do_exception ns3 10.0.3.1 10.0.3.10 10.0.2.253 10.0.2.240/28
+
+# move inexact policies to hash table
+ip -net ns3 xfrm policy set hthresh4 16 16
+
+sleep $((RANDOM%5))
+check_exceptions "exceptions and block policies after hthresh change in ns3"
+
+# restore original hthresh settings -- move policies back to tables
+for n in ns3 ns4;do
+	ip -net $n xfrm policy set hthresh4 32 32 hthresh6 128 128
+	sleep $((RANDOM%5))
+done
+check_exceptions "exceptions and block policies after htresh change to normal"
+
+check_hthresh_repeat "policies with repeated htresh change"
+
+check_random_order ns3 "policies inserted in random order"
+
+for i in 1 2 3 4;do ip netns del ns$i;done
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/.gitignore b/tools/testing/selftests/netfilter/.gitignore
new file mode 100644
index 000000000..8448f74ad
--- /dev/null
+++ b/tools/testing/selftests/netfilter/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+nf-queue
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
new file mode 100644
index 000000000..a56cfc4f2
--- /dev/null
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for netfilter selftests
+
+TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
+	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh \
+	nft_concat_range.sh nft_conntrack_helper.sh \
+	nft_queue.sh nft_meta.sh \
+	conntrack_vrf.sh
+
+LDLIBS = -lmnl
+TEST_GEN_FILES =  nf-queue
+
+include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/bridge_brouter.sh b/tools/testing/selftests/netfilter/bridge_brouter.sh
new file mode 100755
index 000000000..29f3955b9
--- /dev/null
+++ b/tools/testing/selftests/netfilter/bridge_brouter.sh
@@ -0,0 +1,146 @@
+#!/bin/bash
+#
+# This test is for bridge 'brouting', i.e. make some packets being routed
+# rather than getting bridged even though they arrive on interface that is
+# part of a bridge.
+
+#           eth0    br0     eth0
+# setup is: ns1 <-> ns0 <-> ns2
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+ebtables -V > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ebtables"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip netns add ns0
+ip netns add ns1
+ip netns add ns2
+
+ip link add veth0 netns ns0 type veth peer name eth0 netns ns1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Can't create veth device"
+	exit $ksft_skip
+fi
+ip link add veth1 netns ns0 type veth peer name eth0 netns ns2
+
+ip -net ns0 link set lo up
+ip -net ns0 link set veth0 up
+ip -net ns0 link set veth1 up
+
+ip -net ns0 link add br0 type bridge
+if [ $? -ne 0 ]; then
+	echo "SKIP: Can't create bridge br0"
+	exit $ksft_skip
+fi
+
+ip -net ns0 link set veth0 master br0
+ip -net ns0 link set veth1 master br0
+ip -net ns0 link set br0 up
+ip -net ns0 addr add 10.0.0.1/24 dev br0
+
+# place both in same subnet, ns1 and ns2 connected via ns0:br0
+for i in 1 2; do
+  ip -net ns$i link set lo up
+  ip -net ns$i link set eth0 up
+  ip -net ns$i addr add 10.0.0.1$i/24 dev eth0
+done
+
+test_ebtables_broute()
+{
+	local cipt
+
+	# redirect is needed so the dstmac is rewritten to the bridge itself,
+	# ip stack won't process OTHERHOST (foreign unicast mac) packets.
+	ip netns exec ns0 ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add ebtables broute redirect rule"
+		return $ksft_skip
+	fi
+
+	# ping netns1, expected to not work (ip forwarding is off)
+	ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null 2>&1
+	if [ $? -eq 0 ]; then
+		echo "ERROR: ping works, should have failed" 1>&2
+		return 1
+	fi
+
+	# enable forwarding on both interfaces.
+	# neither needs an ip address, but at least the bridge needs
+	# an ip address in same network segment as ns1 and ns2 (ns0
+	# needs to be able to determine route for to-be-forwarded packet).
+	ip netns exec ns0 sysctl -q net.ipv4.conf.veth0.forwarding=1
+	ip netns exec ns0 sysctl -q net.ipv4.conf.veth1.forwarding=1
+
+	sleep 1
+
+	ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null
+	if [ $? -ne 0 ]; then
+		echo "ERROR: ping did not work, but it should (broute+forward)" 1>&2
+		return 1
+	fi
+
+	echo "PASS: ns1/ns2 connectivity with active broute rule"
+	ip netns exec ns0 ebtables -t broute -F
+
+	# ping netns1, expected to work (frames are bridged)
+	ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null
+	if [ $? -ne 0 ]; then
+		echo "ERROR: ping did not work, but it should (bridged)" 1>&2
+		return 1
+	fi
+
+	ip netns exec ns0 ebtables -t filter -A FORWARD -p ipv4 --ip-protocol icmp -j DROP
+
+	# ping netns1, expected to not work (DROP in bridge forward)
+	ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null 2>&1
+	if [ $? -eq 0 ]; then
+		echo "ERROR: ping works, should have failed (icmp forward drop)" 1>&2
+		return 1
+	fi
+
+	# re-activate brouter
+	ip netns exec ns0 ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP
+
+	ip netns exec ns2 ping -q -c 1 10.0.0.11 > /dev/null
+	if [ $? -ne 0 ]; then
+		echo "ERROR: ping did not work, but it should (broute+forward 2)" 1>&2
+		return 1
+	fi
+
+	echo "PASS: ns1/ns2 connectivity with active broute rule and bridge forward drop"
+	return 0
+}
+
+# test basic connectivity
+ip netns exec ns1 ping -c 1 -q 10.0.0.12 > /dev/null
+if [ $? -ne 0 ]; then
+    echo "ERROR: Could not reach ns2 from ns1" 1>&2
+    ret=1
+fi
+
+ip netns exec ns2 ping -c 1 -q 10.0.0.11 > /dev/null
+if [ $? -ne 0 ]; then
+    echo "ERROR: Could not reach ns1 from ns2" 1>&2
+    ret=1
+fi
+
+if [ $ret -eq 0 ];then
+    echo "PASS: netns connectivity: ns1 and ns2 can reach each other"
+fi
+
+test_ebtables_broute
+ret=$?
+for i in 0 1 2; do ip netns del ns$i;done
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config
new file mode 100644
index 000000000..4faf2ce02
--- /dev/null
+++ b/tools/testing/selftests/netfilter/config
@@ -0,0 +1,8 @@
+CONFIG_NET_NS=y
+CONFIG_NF_TABLES_INET=y
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_FLOW_OFFLOAD=m
+CONFIG_NF_CT_NETLINK=m
diff --git a/tools/testing/selftests/netfilter/conntrack_icmp_related.sh b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
new file mode 100755
index 000000000..76645aaf2
--- /dev/null
+++ b/tools/testing/selftests/netfilter/conntrack_icmp_related.sh
@@ -0,0 +1,315 @@
+#!/bin/bash
+#
+# check that ICMP df-needed/pkttoobig icmp are set are set as related
+# state
+#
+# Setup is:
+#
+# nsclient1 -> nsrouter1 -> nsrouter2 -> nsclient2
+# MTU 1500, except for nsrouter2 <-> nsclient2 link (1280).
+# ping nsclient2 from nsclient1, checking that conntrack did set RELATED
+# 'fragmentation needed' icmp packet.
+#
+# In addition, nsrouter1 will perform IP masquerading, i.e. also
+# check the icmp errors are propagated to the correct host as per
+# nat of "established" icmp-echo "connection".
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+cleanup() {
+	for i in 1 2;do ip netns del nsclient$i;done
+	for i in 1 2;do ip netns del nsrouter$i;done
+}
+
+trap cleanup EXIT
+
+ipv4() {
+    echo -n 192.168.$1.2
+}
+
+ipv6 () {
+    echo -n dead:$1::2
+}
+
+check_counter()
+{
+	ns=$1
+	name=$2
+	expect=$3
+	local lret=0
+
+	cnt=$(ip netns exec $ns nft list counter inet filter "$name" | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		echo "ERROR: counter $name in $ns has unexpected value (expected $expect)" 1>&2
+		ip netns exec $ns nft list counter inet filter "$name" 1>&2
+		lret=1
+	fi
+
+	return $lret
+}
+
+check_unknown()
+{
+	expect="packets 0 bytes 0"
+	for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
+		check_counter $n "unknown" "$expect"
+		if [ $? -ne 0 ] ;then
+			return 1
+		fi
+	done
+
+	return 0
+}
+
+for n in nsclient1 nsclient2 nsrouter1 nsrouter2; do
+  ip netns add $n
+  ip -net $n link set lo up
+done
+
+DEV=veth0
+ip link add $DEV netns nsclient1 type veth peer name eth1 netns nsrouter1
+DEV=veth0
+ip link add $DEV netns nsclient2 type veth peer name eth1 netns nsrouter2
+
+DEV=veth0
+ip link add $DEV netns nsrouter1 type veth peer name eth2 netns nsrouter2
+
+DEV=veth0
+for i in 1 2; do
+    ip -net nsclient$i link set $DEV up
+    ip -net nsclient$i addr add $(ipv4 $i)/24 dev $DEV
+    ip -net nsclient$i addr add $(ipv6 $i)/64 dev $DEV
+done
+
+ip -net nsrouter1 link set eth1 up
+ip -net nsrouter1 link set veth0 up
+
+ip -net nsrouter2 link set eth1 up
+ip -net nsrouter2 link set eth2 up
+
+ip -net nsclient1 route add default via 192.168.1.1
+ip -net nsclient1 -6 route add default via dead:1::1
+
+ip -net nsclient2 route add default via 192.168.2.1
+ip -net nsclient2 route add default via dead:2::1
+
+i=3
+ip -net nsrouter1 addr add 192.168.1.1/24 dev eth1
+ip -net nsrouter1 addr add 192.168.3.1/24 dev veth0
+ip -net nsrouter1 addr add dead:1::1/64 dev eth1
+ip -net nsrouter1 addr add dead:3::1/64 dev veth0
+ip -net nsrouter1 route add default via 192.168.3.10
+ip -net nsrouter1 -6 route add default via dead:3::10
+
+ip -net nsrouter2 addr add 192.168.2.1/24 dev eth1
+ip -net nsrouter2 addr add 192.168.3.10/24 dev eth2
+ip -net nsrouter2 addr add dead:2::1/64 dev eth1
+ip -net nsrouter2 addr add dead:3::10/64 dev eth2
+ip -net nsrouter2 route add default via 192.168.3.1
+ip -net nsrouter2 route add default via dead:3::1
+
+sleep 2
+for i in 4 6; do
+	ip netns exec nsrouter1 sysctl -q net.ipv$i.conf.all.forwarding=1
+	ip netns exec nsrouter2 sysctl -q net.ipv$i.conf.all.forwarding=1
+done
+
+for netns in nsrouter1 nsrouter2; do
+ip netns exec $netns nft -f - <<EOF
+table inet filter {
+	counter unknown { }
+	counter related { }
+	chain forward {
+		type filter hook forward priority 0; policy accept;
+		meta l4proto icmpv6 icmpv6 type "packet-too-big" ct state "related" counter name "related" accept
+		meta l4proto icmp icmp type "destination-unreachable" ct state "related" counter name "related" accept
+		meta l4proto { icmp, icmpv6 } ct state new,established accept
+		counter name "unknown" drop
+	}
+}
+EOF
+done
+
+ip netns exec nsclient1 nft -f - <<EOF
+table inet filter {
+	counter unknown { }
+	counter related { }
+	counter redir4 { }
+	counter redir6 { }
+	chain input {
+		type filter hook input priority 0; policy accept;
+
+		icmp type "redirect" ct state "related" counter name "redir4" accept
+		icmpv6 type "nd-redirect" ct state "related" counter name "redir6" accept
+
+		meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+		meta l4proto { icmp, icmpv6 } ct state "related" counter name "related" accept
+
+		counter name "unknown" drop
+	}
+}
+EOF
+
+ip netns exec nsclient2 nft -f - <<EOF
+table inet filter {
+	counter unknown { }
+	counter new { }
+	counter established { }
+
+	chain input {
+		type filter hook input priority 0; policy accept;
+		meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+		meta l4proto { icmp, icmpv6 } ct state "new" counter name "new" accept
+		meta l4proto { icmp, icmpv6 } ct state "established" counter name "established" accept
+		counter name "unknown" drop
+	}
+	chain output {
+		type filter hook output priority 0; policy accept;
+		meta l4proto { icmp, icmpv6 } ct state established,untracked accept
+
+		meta l4proto { icmp, icmpv6 } ct state "new" counter name "new"
+		meta l4proto { icmp, icmpv6 } ct state "established" counter name "established"
+		counter name "unknown" drop
+	}
+}
+EOF
+
+
+# make sure NAT core rewrites adress of icmp error if nat is used according to
+# conntrack nat information (icmp error will be directed at nsrouter1 address,
+# but it needs to be routed to nsclient1 address).
+ip netns exec nsrouter1 nft -f - <<EOF
+table ip nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		ip protocol icmp oifname "veth0" counter masquerade
+	}
+}
+table ip6 nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		ip6 nexthdr icmpv6 oifname "veth0" counter masquerade
+	}
+}
+EOF
+
+ip netns exec nsrouter2 ip link set eth1  mtu 1280
+ip netns exec nsclient2 ip link set veth0 mtu 1280
+sleep 1
+
+ip netns exec nsclient1 ping -c 1 -s 1000 -q -M do 192.168.2.2 >/dev/null
+if [ $? -ne 0 ]; then
+	echo "ERROR: netns ip routing/connectivity broken" 1>&2
+	cleanup
+	exit 1
+fi
+ip netns exec nsclient1 ping6 -q -c 1 -s 1000 dead:2::2 >/dev/null
+if [ $? -ne 0 ]; then
+	echo "ERROR: netns ipv6 routing/connectivity broken" 1>&2
+	cleanup
+	exit 1
+fi
+
+check_unknown
+if [ $? -ne 0 ]; then
+	ret=1
+fi
+
+expect="packets 0 bytes 0"
+for netns in nsrouter1 nsrouter2 nsclient1;do
+	check_counter "$netns" "related" "$expect"
+	if [ $? -ne 0 ]; then
+		ret=1
+	fi
+done
+
+expect="packets 2 bytes 2076"
+check_counter nsclient2 "new" "$expect"
+if [ $? -ne 0 ]; then
+	ret=1
+fi
+
+ip netns exec nsclient1 ping -q -c 1 -s 1300 -M do 192.168.2.2 > /dev/null
+if [ $? -eq 0 ]; then
+	echo "ERROR: ping should have failed with PMTU too big error" 1>&2
+	ret=1
+fi
+
+# nsrouter2 should have generated the icmp error, so
+# related counter should be 0 (its in forward).
+expect="packets 0 bytes 0"
+check_counter "nsrouter2" "related" "$expect"
+if [ $? -ne 0 ]; then
+	ret=1
+fi
+
+# but nsrouter1 should have seen it, same for nsclient1.
+expect="packets 1 bytes 576"
+for netns in nsrouter1 nsclient1;do
+	check_counter "$netns" "related" "$expect"
+	if [ $? -ne 0 ]; then
+		ret=1
+	fi
+done
+
+ip netns exec nsclient1 ping6 -c 1 -s 1300 dead:2::2 > /dev/null
+if [ $? -eq 0 ]; then
+	echo "ERROR: ping6 should have failed with PMTU too big error" 1>&2
+	ret=1
+fi
+
+expect="packets 2 bytes 1856"
+for netns in nsrouter1 nsclient1;do
+	check_counter "$netns" "related" "$expect"
+	if [ $? -ne 0 ]; then
+		ret=1
+	fi
+done
+
+if [ $ret -eq 0 ];then
+	echo "PASS: icmp mtu error had RELATED state"
+else
+	echo "ERROR: icmp error RELATED state test has failed"
+fi
+
+# add 'bad' route,  expect icmp REDIRECT to be generated
+ip netns exec nsclient1 ip route add 192.168.1.42 via 192.168.1.1
+ip netns exec nsclient1 ip route add dead:1::42 via dead:1::1
+
+ip netns exec "nsclient1" ping -q -c 2 192.168.1.42 > /dev/null
+
+expect="packets 1 bytes 112"
+check_counter nsclient1 "redir4" "$expect"
+if [ $? -ne 0 ];then
+	ret=1
+fi
+
+ip netns exec "nsclient1" ping -c 1 dead:1::42 > /dev/null
+expect="packets 1 bytes 192"
+check_counter nsclient1 "redir6" "$expect"
+if [ $? -ne 0 ];then
+	ret=1
+fi
+
+if [ $ret -eq 0 ];then
+	echo "PASS: icmp redirects had RELATED state"
+else
+	echo "ERROR: icmp redirect RELATED state test has failed"
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/conntrack_vrf.sh b/tools/testing/selftests/netfilter/conntrack_vrf.sh
new file mode 100755
index 000000000..8b5ea9234
--- /dev/null
+++ b/tools/testing/selftests/netfilter/conntrack_vrf.sh
@@ -0,0 +1,241 @@
+#!/bin/sh
+
+# This script demonstrates interaction of conntrack and vrf.
+# The vrf driver calls the netfilter hooks again, with oif/iif
+# pointing at the VRF device.
+#
+# For ingress, this means first iteration has iifname of lower/real
+# device.  In this script, thats veth0.
+# Second iteration is iifname set to vrf device, tvrf in this script.
+#
+# For egress, this is reversed: first iteration has the vrf device,
+# second iteration is done with the lower/real/veth0 device.
+#
+# test_ct_zone_in demonstrates unexpected change of nftables
+# behavior # caused by commit 09e856d54bda5f28 "vrf: Reset skb conntrack
+# connection on VRF rcv"
+#
+# It was possible to assign conntrack zone to a packet (or mark it for
+# `notracking`) in the prerouting chain before conntrack, based on real iif.
+#
+# After the change, the zone assignment is lost and the zone is assigned based
+# on the VRF master interface (in case such a rule exists).
+# assignment is lost. Instead, assignment based on the `iif` matching
+# Thus it is impossible to distinguish packets based on the original
+# interface.
+#
+# test_masquerade_vrf and test_masquerade_veth0 demonstrate the problem
+# that was supposed to be fixed by the commit mentioned above to make sure
+# that any fix to test case 1 won't break masquerade again.
+
+ksft_skip=4
+
+IP0=172.30.30.1
+IP1=172.30.30.2
+PFXL=30
+ret=0
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+
+cleanup()
+{
+	ip netns pids $ns0 | xargs kill 2>/dev/null
+	ip netns pids $ns1 | xargs kill 2>/dev/null
+
+	ip netns del $ns0 $ns1
+}
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip netns add "$ns0"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns0"
+	exit $ksft_skip
+fi
+ip netns add "$ns1"
+
+trap cleanup EXIT
+
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.default.rp_filter=0
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+ip netns exec $ns0 sysctl -q -w net.ipv4.conf.all.rp_filter=0
+
+ip link add veth0 netns "$ns0" type veth peer name veth0 netns "$ns1" > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not add veth device"
+	exit $ksft_skip
+fi
+
+ip -net $ns0 li add tvrf type vrf table 9876
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not add vrf device"
+	exit $ksft_skip
+fi
+
+ip -net $ns0 li set lo up
+
+ip -net $ns0 li set veth0 master tvrf
+ip -net $ns0 li set tvrf up
+ip -net $ns0 li set veth0 up
+ip -net $ns1 li set veth0 up
+
+ip -net $ns0 addr add $IP0/$PFXL dev veth0
+ip -net $ns1 addr add $IP1/$PFXL dev veth0
+
+ip netns exec $ns1 iperf3 -s > /dev/null 2>&1&
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not start iperf3"
+	exit $ksft_skip
+fi
+
+# test vrf ingress handling.
+# The incoming connection should be placed in conntrack zone 1,
+# as decided by the first iteration of the ruleset.
+test_ct_zone_in()
+{
+ip netns exec $ns0 nft -f - <<EOF
+table testct {
+	chain rawpre {
+		type filter hook prerouting priority raw;
+
+		iif { veth0, tvrf } counter meta nftrace set 1
+		iif veth0 counter ct zone set 1 counter return
+		iif tvrf counter ct zone set 2 counter return
+		ip protocol icmp counter
+		notrack counter
+	}
+
+	chain rawout {
+		type filter hook output priority raw;
+
+		oif veth0 counter ct zone set 1 counter return
+		oif tvrf counter ct zone set 2 counter return
+		notrack counter
+	}
+}
+EOF
+	ip netns exec $ns1 ping -W 1 -c 1 -I veth0 $IP0 > /dev/null
+
+	# should be in zone 1, not zone 2
+	count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 1 2>/dev/null | wc -l)
+	if [ $count -eq 1 ]; then
+		echo "PASS: entry found in conntrack zone 1"
+	else
+		echo "FAIL: entry not found in conntrack zone 1"
+		count=$(ip netns exec $ns0 conntrack -L -s $IP1 -d $IP0 -p icmp --zone 2 2> /dev/null | wc -l)
+		if [ $count -eq 1 ]; then
+			echo "FAIL: entry found in zone 2 instead"
+		else
+			echo "FAIL: entry not in zone 1 or 2, dumping table"
+			ip netns exec $ns0 conntrack -L
+			ip netns exec $ns0 nft list ruleset
+		fi
+	fi
+}
+
+# add masq rule that gets evaluated w. outif set to vrf device.
+# This tests the first iteration of the packet through conntrack,
+# oifname is the vrf device.
+test_masquerade_vrf()
+{
+	local qdisc=$1
+
+	if [ "$qdisc" != "default" ]; then
+		tc -net $ns0 qdisc add dev tvrf root $qdisc
+	fi
+
+	ip netns exec $ns0 conntrack -F 2>/dev/null
+
+ip netns exec $ns0 nft -f - <<EOF
+flush ruleset
+table ip nat {
+	chain rawout {
+		type filter hook output priority raw;
+
+		oif tvrf ct state untracked counter
+	}
+	chain postrouting2 {
+		type filter hook postrouting priority mangle;
+
+		oif tvrf ct state untracked counter
+	}
+	chain postrouting {
+		type nat hook postrouting priority 0;
+		# NB: masquerade should always be combined with 'oif(name) bla',
+		# lack of this is intentional here, we want to exercise double-snat.
+		ip saddr 172.30.30.0/30 counter masquerade random
+	}
+}
+EOF
+	ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 >/dev/null
+	if [ $? -ne 0 ]; then
+		echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on vrf device"
+		ret=1
+		return
+	fi
+
+	# must also check that nat table was evaluated on second (lower device) iteration.
+	ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2' &&
+	ip netns exec $ns0 nft list table ip nat |grep -q 'untracked counter packets [1-9]'
+	if [ $? -eq 0 ]; then
+		echo "PASS: iperf3 connect with masquerade + sport rewrite on vrf device ($qdisc qdisc)"
+	else
+		echo "FAIL: vrf rules have unexpected counter value"
+		ret=1
+	fi
+
+	if [ "$qdisc" != "default" ]; then
+		tc -net $ns0 qdisc del dev tvrf root
+	fi
+}
+
+# add masq rule that gets evaluated w. outif set to veth device.
+# This tests the 2nd iteration of the packet through conntrack,
+# oifname is the lower device (veth0 in this case).
+test_masquerade_veth()
+{
+	ip netns exec $ns0 conntrack -F 2>/dev/null
+ip netns exec $ns0 nft -f - <<EOF
+flush ruleset
+table ip nat {
+	chain postrouting {
+		type nat hook postrouting priority 0;
+		meta oif veth0 ip saddr 172.30.30.0/30 counter masquerade random
+	}
+}
+EOF
+	ip netns exec $ns0 ip vrf exec tvrf iperf3 -t 1 -c $IP1 > /dev/null
+	if [ $? -ne 0 ]; then
+		echo "FAIL: iperf3 connect failure with masquerade + sport rewrite on veth device"
+		ret=1
+		return
+	fi
+
+	# must also check that nat table was evaluated on second (lower device) iteration.
+	ip netns exec $ns0 nft list table ip nat |grep -q 'counter packets 2'
+	if [ $? -eq 0 ]; then
+		echo "PASS: iperf3 connect with masquerade + sport rewrite on veth device"
+	else
+		echo "FAIL: vrf masq rule has unexpected counter value"
+		ret=1
+	fi
+}
+
+test_ct_zone_in
+test_masquerade_vrf "default"
+test_masquerade_vrf "pfifo"
+test_masquerade_veth
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
new file mode 100755
index 000000000..c3b8f90c4
--- /dev/null
+++ b/tools/testing/selftests/netfilter/ipvs.sh
@@ -0,0 +1,228 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# End-to-end ipvs test suite
+# Topology:
+#--------------------------------------------------------------+
+#                      |                                       |
+#         ns0          |         ns1                           |
+#      -----------     |     -----------    -----------        |
+#      | veth01  | --------- | veth10  |    | veth12  |        |
+#      -----------    peer   -----------    -----------        |
+#           |          |                        |              |
+#      -----------     |                        |              |
+#      |  br0    |     |-----------------  peer |--------------|
+#      -----------     |                        |              |
+#           |          |                        |              |
+#      ----------     peer   ----------      -----------       |
+#      |  veth02 | --------- |  veth20 |     | veth21  |       |
+#      ----------      |     ----------      -----------       |
+#                      |         ns2                           |
+#                      |                                       |
+#--------------------------------------------------------------+
+#
+# We assume that all network driver are loaded
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+GREEN='\033[0;92m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+
+readonly port=8080
+
+readonly vip_v4=207.175.44.110
+readonly cip_v4=10.0.0.2
+readonly gip_v4=10.0.0.1
+readonly dip_v4=172.16.0.1
+readonly rip_v4=172.16.0.2
+readonly sip_v4=10.0.0.3
+
+readonly infile="$(mktemp)"
+readonly outfile="$(mktemp)"
+readonly datalen=32
+
+sysipvsnet="/proc/sys/net/ipv4/vs/"
+if [ ! -d $sysipvsnet ]; then
+	modprobe -q ip_vs
+	if [ $? -ne 0 ]; then
+		echo "skip: could not run test without ipvs module"
+		exit $ksft_skip
+	fi
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ipvsadm -v > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ipvsadm"
+	exit $ksft_skip
+fi
+
+setup() {
+	ip netns add ns0
+	ip netns add ns1
+	ip netns add ns2
+
+	ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
+	ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
+	ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
+
+	ip netns exec ns0 ip link set veth01 up
+	ip netns exec ns0 ip link set veth02 up
+	ip netns exec ns0 ip link add br0 type bridge
+	ip netns exec ns0 ip link set veth01 master br0
+	ip netns exec ns0 ip link set veth02 master br0
+	ip netns exec ns0 ip link set br0 up
+	ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
+
+	ip netns exec ns1 ip link set lo up
+	ip netns exec ns1 ip link set veth10 up
+	ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
+	ip netns exec ns1 ip link set veth12 up
+	ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
+
+	ip netns exec ns2 ip link set lo up
+	ip netns exec ns2 ip link set veth21 up
+	ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
+	ip netns exec ns2 ip link set veth20 up
+	ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
+
+	sleep 1
+
+	dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none
+}
+
+cleanup() {
+	for i in 0 1 2
+	do
+		ip netns del ns$i > /dev/null 2>&1
+	done
+
+	if [ -f "${outfile}" ]; then
+		rm "${outfile}"
+	fi
+	if [ -f "${infile}" ]; then
+		rm "${infile}"
+	fi
+}
+
+server_listen() {
+	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
+	server_pid=$!
+	sleep 0.2
+}
+
+client_connect() {
+	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
+}
+
+verify_data() {
+	wait "${server_pid}"
+	cmp "$infile" "$outfile" 2>/dev/null
+}
+
+test_service() {
+	server_listen
+	client_connect
+	verify_data
+}
+
+
+test_dr() {
+	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+	ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+	# avoid incorrect arp response
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
+	# avoid reverse route lookup
+	ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
+	ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
+	ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
+
+	test_service
+}
+
+test_nat() {
+	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+	ip netns exec ns1 ipvsadm -a -m -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+	ip netns exec ns2 ip link del veth20
+	ip netns exec ns2 ip route add default via ${dip_v4} dev veth21
+
+	test_service
+}
+
+test_tun() {
+	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+	ip netns exec ns1 modprobe ipip
+	ip netns exec ns1 ip link set tunl0 up
+	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=0
+	ip netns exec ns1 sysctl -qw net.ipv4.conf.all.send_redirects=0
+	ip netns exec ns1 sysctl -qw net.ipv4.conf.default.send_redirects=0
+	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+	ip netns exec ns1 ipvsadm -a -i -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+	ip netns exec ns2 modprobe ipip
+	ip netns exec ns2 ip link set tunl0 up
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.tunl0.rp_filter=0
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.veth21.rp_filter=0
+	ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
+
+	test_service
+}
+
+run_tests() {
+	local errors=
+
+	echo "Testing DR mode..."
+	cleanup
+	setup
+	test_dr
+	errors=$(( $errors + $? ))
+
+	echo "Testing NAT mode..."
+	cleanup
+	setup
+	test_nat
+	errors=$(( $errors + $? ))
+
+	echo "Testing Tunnel mode..."
+	cleanup
+	setup
+	test_tun
+	errors=$(( $errors + $? ))
+
+	return $errors
+}
+
+trap cleanup EXIT
+
+run_tests
+
+if [ $? -ne 0 ]; then
+	echo -e "$(basename $0): ${RED}FAIL${NC}"
+	exit 1
+fi
+echo -e "$(basename $0): ${GREEN}PASS${NC}"
+exit 0
diff --git a/tools/testing/selftests/netfilter/nf-queue.c b/tools/testing/selftests/netfilter/nf-queue.c
new file mode 100644
index 000000000..9e56b9d47
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nf-queue.c
@@ -0,0 +1,395 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <time.h>
+#include <arpa/inet.h>
+
+#include <libmnl/libmnl.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nfnetlink.h>
+#include <linux/netfilter/nfnetlink_queue.h>
+
+struct options {
+	bool count_packets;
+	bool gso_enabled;
+	int verbose;
+	unsigned int queue_num;
+	unsigned int timeout;
+	uint32_t verdict;
+	uint32_t delay_ms;
+};
+
+static unsigned int queue_stats[5];
+static struct options opts;
+
+static void help(const char *p)
+{
+	printf("Usage: %s [-c|-v [-vv] ] [-t timeout] [-q queue_num] [-Qdst_queue ] [ -d ms_delay ] [-G]\n", p);
+}
+
+static int parse_attr_cb(const struct nlattr *attr, void *data)
+{
+	const struct nlattr **tb = data;
+	int type = mnl_attr_get_type(attr);
+
+	/* skip unsupported attribute in user-space */
+	if (mnl_attr_type_valid(attr, NFQA_MAX) < 0)
+		return MNL_CB_OK;
+
+	switch (type) {
+	case NFQA_MARK:
+	case NFQA_IFINDEX_INDEV:
+	case NFQA_IFINDEX_OUTDEV:
+	case NFQA_IFINDEX_PHYSINDEV:
+	case NFQA_IFINDEX_PHYSOUTDEV:
+		if (mnl_attr_validate(attr, MNL_TYPE_U32) < 0) {
+			perror("mnl_attr_validate");
+			return MNL_CB_ERROR;
+		}
+		break;
+	case NFQA_TIMESTAMP:
+		if (mnl_attr_validate2(attr, MNL_TYPE_UNSPEC,
+		    sizeof(struct nfqnl_msg_packet_timestamp)) < 0) {
+			perror("mnl_attr_validate2");
+			return MNL_CB_ERROR;
+		}
+		break;
+	case NFQA_HWADDR:
+		if (mnl_attr_validate2(attr, MNL_TYPE_UNSPEC,
+		    sizeof(struct nfqnl_msg_packet_hw)) < 0) {
+			perror("mnl_attr_validate2");
+			return MNL_CB_ERROR;
+		}
+		break;
+	case NFQA_PAYLOAD:
+		break;
+	}
+	tb[type] = attr;
+	return MNL_CB_OK;
+}
+
+static int queue_cb(const struct nlmsghdr *nlh, void *data)
+{
+	struct nlattr *tb[NFQA_MAX+1] = { 0 };
+	struct nfqnl_msg_packet_hdr *ph = NULL;
+	uint32_t id = 0;
+
+	(void)data;
+
+	mnl_attr_parse(nlh, sizeof(struct nfgenmsg), parse_attr_cb, tb);
+	if (tb[NFQA_PACKET_HDR]) {
+		ph = mnl_attr_get_payload(tb[NFQA_PACKET_HDR]);
+		id = ntohl(ph->packet_id);
+
+		if (opts.verbose > 0)
+			printf("packet hook=%u, hwproto 0x%x",
+				ntohs(ph->hw_protocol), ph->hook);
+
+		if (ph->hook >= 5) {
+			fprintf(stderr, "Unknown hook %d\n", ph->hook);
+			return MNL_CB_ERROR;
+		}
+
+		if (opts.verbose > 0) {
+			uint32_t skbinfo = 0;
+
+			if (tb[NFQA_SKB_INFO])
+				skbinfo = ntohl(mnl_attr_get_u32(tb[NFQA_SKB_INFO]));
+			if (skbinfo & NFQA_SKB_CSUMNOTREADY)
+				printf(" csumnotready");
+			if (skbinfo & NFQA_SKB_GSO)
+				printf(" gso");
+			if (skbinfo & NFQA_SKB_CSUM_NOTVERIFIED)
+				printf(" csumnotverified");
+			puts("");
+		}
+
+		if (opts.count_packets)
+			queue_stats[ph->hook]++;
+	}
+
+	return MNL_CB_OK + id;
+}
+
+static struct nlmsghdr *
+nfq_build_cfg_request(char *buf, uint8_t command, int queue_num)
+{
+	struct nlmsghdr *nlh = mnl_nlmsg_put_header(buf);
+	struct nfqnl_msg_config_cmd cmd = {
+		.command = command,
+		.pf = htons(AF_INET),
+	};
+	struct nfgenmsg *nfg;
+
+	nlh->nlmsg_type	= (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_CONFIG;
+	nlh->nlmsg_flags = NLM_F_REQUEST;
+
+	nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg));
+
+	nfg->nfgen_family = AF_UNSPEC;
+	nfg->version = NFNETLINK_V0;
+	nfg->res_id = htons(queue_num);
+
+	mnl_attr_put(nlh, NFQA_CFG_CMD, sizeof(cmd), &cmd);
+
+	return nlh;
+}
+
+static struct nlmsghdr *
+nfq_build_cfg_params(char *buf, uint8_t mode, int range, int queue_num)
+{
+	struct nlmsghdr *nlh = mnl_nlmsg_put_header(buf);
+	struct nfqnl_msg_config_params params = {
+		.copy_range = htonl(range),
+		.copy_mode = mode,
+	};
+	struct nfgenmsg *nfg;
+
+	nlh->nlmsg_type	= (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_CONFIG;
+	nlh->nlmsg_flags = NLM_F_REQUEST;
+
+	nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg));
+	nfg->nfgen_family = AF_UNSPEC;
+	nfg->version = NFNETLINK_V0;
+	nfg->res_id = htons(queue_num);
+
+	mnl_attr_put(nlh, NFQA_CFG_PARAMS, sizeof(params), &params);
+
+	return nlh;
+}
+
+static struct nlmsghdr *
+nfq_build_verdict(char *buf, int id, int queue_num, uint32_t verd)
+{
+	struct nfqnl_msg_verdict_hdr vh = {
+		.verdict = htonl(verd),
+		.id = htonl(id),
+	};
+	struct nlmsghdr *nlh;
+	struct nfgenmsg *nfg;
+
+	nlh = mnl_nlmsg_put_header(buf);
+	nlh->nlmsg_type = (NFNL_SUBSYS_QUEUE << 8) | NFQNL_MSG_VERDICT;
+	nlh->nlmsg_flags = NLM_F_REQUEST;
+	nfg = mnl_nlmsg_put_extra_header(nlh, sizeof(*nfg));
+	nfg->nfgen_family = AF_UNSPEC;
+	nfg->version = NFNETLINK_V0;
+	nfg->res_id = htons(queue_num);
+
+	mnl_attr_put(nlh, NFQA_VERDICT_HDR, sizeof(vh), &vh);
+
+	return nlh;
+}
+
+static void print_stats(void)
+{
+	unsigned int last, total;
+	int i;
+
+	total = 0;
+	last = queue_stats[0];
+
+	for (i = 0; i < 5; i++) {
+		printf("hook %d packets %08u\n", i, queue_stats[i]);
+		last = queue_stats[i];
+		total += last;
+	}
+
+	printf("%u packets total\n", total);
+}
+
+struct mnl_socket *open_queue(void)
+{
+	char buf[MNL_SOCKET_BUFFER_SIZE];
+	unsigned int queue_num;
+	struct mnl_socket *nl;
+	struct nlmsghdr *nlh;
+	struct timeval tv;
+	uint32_t flags;
+
+	nl = mnl_socket_open(NETLINK_NETFILTER);
+	if (nl == NULL) {
+		perror("mnl_socket_open");
+		exit(EXIT_FAILURE);
+	}
+
+	if (mnl_socket_bind(nl, 0, MNL_SOCKET_AUTOPID) < 0) {
+		perror("mnl_socket_bind");
+		exit(EXIT_FAILURE);
+	}
+
+	queue_num = opts.queue_num;
+	nlh = nfq_build_cfg_request(buf, NFQNL_CFG_CMD_BIND, queue_num);
+
+	if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) {
+		perror("mnl_socket_sendto");
+		exit(EXIT_FAILURE);
+	}
+
+	nlh = nfq_build_cfg_params(buf, NFQNL_COPY_PACKET, 0xFFFF, queue_num);
+
+	flags = opts.gso_enabled ? NFQA_CFG_F_GSO : 0;
+	flags |= NFQA_CFG_F_UID_GID;
+	mnl_attr_put_u32(nlh, NFQA_CFG_FLAGS, htonl(flags));
+	mnl_attr_put_u32(nlh, NFQA_CFG_MASK, htonl(flags));
+
+	if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) {
+		perror("mnl_socket_sendto");
+		exit(EXIT_FAILURE);
+	}
+
+	memset(&tv, 0, sizeof(tv));
+	tv.tv_sec = opts.timeout;
+	if (opts.timeout && setsockopt(mnl_socket_get_fd(nl),
+				       SOL_SOCKET, SO_RCVTIMEO,
+				       &tv, sizeof(tv))) {
+		perror("setsockopt(SO_RCVTIMEO)");
+		exit(EXIT_FAILURE);
+	}
+
+	return nl;
+}
+
+static void sleep_ms(uint32_t delay)
+{
+	struct timespec ts = { .tv_sec = delay / 1000 };
+
+	delay %= 1000;
+
+	ts.tv_nsec = delay * 1000llu * 1000llu;
+
+	nanosleep(&ts, NULL);
+}
+
+static int mainloop(void)
+{
+	unsigned int buflen = 64 * 1024 + MNL_SOCKET_BUFFER_SIZE;
+	struct mnl_socket *nl;
+	struct nlmsghdr *nlh;
+	unsigned int portid;
+	char *buf;
+	int ret;
+
+	buf = malloc(buflen);
+	if (!buf) {
+		perror("malloc");
+		exit(EXIT_FAILURE);
+	}
+
+	nl = open_queue();
+	portid = mnl_socket_get_portid(nl);
+
+	for (;;) {
+		uint32_t id;
+
+		ret = mnl_socket_recvfrom(nl, buf, buflen);
+		if (ret == -1) {
+			if (errno == ENOBUFS || errno == EINTR)
+				continue;
+
+			if (errno == EAGAIN) {
+				errno = 0;
+				ret = 0;
+				break;
+			}
+
+			perror("mnl_socket_recvfrom");
+			exit(EXIT_FAILURE);
+		}
+
+		ret = mnl_cb_run(buf, ret, 0, portid, queue_cb, NULL);
+		if (ret < 0) {
+			perror("mnl_cb_run");
+			exit(EXIT_FAILURE);
+		}
+
+		id = ret - MNL_CB_OK;
+		if (opts.delay_ms)
+			sleep_ms(opts.delay_ms);
+
+		nlh = nfq_build_verdict(buf, id, opts.queue_num, opts.verdict);
+		if (mnl_socket_sendto(nl, nlh, nlh->nlmsg_len) < 0) {
+			perror("mnl_socket_sendto");
+			exit(EXIT_FAILURE);
+		}
+	}
+
+	mnl_socket_close(nl);
+
+	return ret;
+}
+
+static void parse_opts(int argc, char **argv)
+{
+	int c;
+
+	while ((c = getopt(argc, argv, "chvt:q:Q:d:G")) != -1) {
+		switch (c) {
+		case 'c':
+			opts.count_packets = true;
+			break;
+		case 'h':
+			help(argv[0]);
+			exit(0);
+			break;
+		case 'q':
+			opts.queue_num = atoi(optarg);
+			if (opts.queue_num > 0xffff)
+				opts.queue_num = 0;
+			break;
+		case 'Q':
+			opts.verdict = atoi(optarg);
+			if (opts.verdict > 0xffff) {
+				fprintf(stderr, "Expected destination queue number\n");
+				exit(1);
+			}
+
+			opts.verdict <<= 16;
+			opts.verdict |= NF_QUEUE;
+			break;
+		case 'd':
+			opts.delay_ms = atoi(optarg);
+			if (opts.delay_ms == 0) {
+				fprintf(stderr, "Expected nonzero delay (in milliseconds)\n");
+				exit(1);
+			}
+			break;
+		case 't':
+			opts.timeout = atoi(optarg);
+			break;
+		case 'G':
+			opts.gso_enabled = false;
+			break;
+		case 'v':
+			opts.verbose++;
+			break;
+		}
+	}
+
+	if (opts.verdict != NF_ACCEPT && (opts.verdict >> 16 == opts.queue_num)) {
+		fprintf(stderr, "Cannot use same destination and source queue\n");
+		exit(1);
+	}
+}
+
+int main(int argc, char *argv[])
+{
+	int ret;
+
+	opts.verdict = NF_ACCEPT;
+	opts.gso_enabled = true;
+
+	parse_opts(argc, argv);
+
+	ret = mainloop();
+	if (opts.count_packets)
+		print_stats();
+
+	return ret;
+}
diff --git a/tools/testing/selftests/netfilter/nft_concat_range.sh b/tools/testing/selftests/netfilter/nft_concat_range.sh
new file mode 100755
index 000000000..af3461cb5
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_concat_range.sh
@@ -0,0 +1,1586 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# nft_concat_range.sh - Tests for sets with concatenation of ranged fields
+#
+# Copyright (c) 2019 Red Hat GmbH
+#
+# Author: Stefano Brivio <sbrivio@redhat.com>
+#
+# shellcheck disable=SC2154,SC2034,SC2016,SC2030,SC2031
+# ^ Configuration and templates sourced with eval, counters reused in subshells
+
+KSELFTEST_SKIP=4
+
+# Available test groups:
+# - reported_issues: check for issues that were reported in the past
+# - correctness: check that packets match given entries, and only those
+# - concurrency: attempt races between insertion, deletion and lookup
+# - timeout: check that packets match entries until they expire
+# - performance: estimate matching rate, compare with rbtree and hash baselines
+TESTS="reported_issues correctness concurrency timeout"
+[ "${quicktest}" != "1" ] && TESTS="${TESTS} performance"
+
+# Set types, defined by TYPE_ variables below
+TYPES="net_port port_net net6_port port_proto net6_port_mac net6_port_mac_proto
+       net_port_net net_mac net_mac_icmp net6_mac_icmp net6_port_net6_port
+       net_port_mac_proto_net"
+
+# Reported bugs, also described by TYPE_ variables below
+BUGS="flush_remove_add reload"
+
+# List of possible paths to pktgen script from kernel tree for performance tests
+PKTGEN_SCRIPT_PATHS="
+	../../../../samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
+	pktgen/pktgen_bench_xmit_mode_netif_receive.sh"
+
+# Definition of set types:
+# display	display text for test report
+# type_spec	nftables set type specifier
+# chain_spec	nftables type specifier for rules mapping to set
+# dst		call sequence of format_*() functions for destination fields
+# src		call sequence of format_*() functions for source fields
+# start		initial integer used to generate addresses and ports
+# count		count of entries to generate and match
+# src_delta	number summed to destination generator for source fields
+# tools		list of tools for correctness and timeout tests, any can be used
+# proto		L4 protocol of test packets
+#
+# race_repeat	race attempts per thread, 0 disables concurrency test for type
+# flood_tools	list of tools for concurrency tests, any can be used
+# flood_proto	L4 protocol of test packets for concurrency tests
+# flood_spec	nftables type specifier for concurrency tests
+#
+# perf_duration	duration of single pktgen injection test
+# perf_spec	nftables type specifier for performance tests
+# perf_dst	format_*() functions for destination fields in performance test
+# perf_src	format_*() functions for source fields in performance test
+# perf_entries	number of set entries for performance test
+# perf_proto	L3 protocol of test packets
+TYPE_net_port="
+display		net,port
+type_spec	ipv4_addr . inet_service
+chain_spec	ip daddr . udp dport
+dst		addr4 port
+src		 
+start		1
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	3
+flood_tools	iperf3 iperf netperf
+flood_proto	udp
+flood_spec	ip daddr . udp dport
+
+perf_duration	5
+perf_spec	ip daddr . udp dport
+perf_dst	addr4 port
+perf_src	 
+perf_entries	1000
+perf_proto	ipv4
+"
+
+TYPE_port_net="
+display		port,net
+type_spec	inet_service . ipv4_addr
+chain_spec	udp dport . ip daddr
+dst		port addr4
+src		 
+start		1
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	3
+flood_tools	iperf3 iperf netperf
+flood_proto	udp
+flood_spec	udp dport . ip daddr
+
+perf_duration	5
+perf_spec	udp dport . ip daddr
+perf_dst	port addr4
+perf_src	 
+perf_entries	100
+perf_proto	ipv4
+"
+
+TYPE_net6_port="
+display		net6,port
+type_spec	ipv6_addr . inet_service
+chain_spec	ip6 daddr . udp dport
+dst		addr6 port
+src		 
+start		10
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp6
+
+race_repeat	3
+flood_tools	iperf3 iperf netperf
+flood_proto	tcp6
+flood_spec	ip6 daddr . udp dport
+
+perf_duration	5
+perf_spec	ip6 daddr . udp dport
+perf_dst	addr6 port
+perf_src	 
+perf_entries	1000
+perf_proto	ipv6
+"
+
+TYPE_port_proto="
+display		port,proto
+type_spec	inet_service . inet_proto
+chain_spec	udp dport . meta l4proto
+dst		port proto
+src		 
+start		1
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	0
+
+perf_duration	5
+perf_spec	udp dport . meta l4proto
+perf_dst	port proto
+perf_src	 
+perf_entries	30000
+perf_proto	ipv4
+"
+
+TYPE_net6_port_mac="
+display		net6,port,mac
+type_spec	ipv6_addr . inet_service . ether_addr
+chain_spec	ip6 daddr . udp dport . ether saddr
+dst		addr6 port
+src		mac
+start		10
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp6
+
+race_repeat	0
+
+perf_duration	5
+perf_spec	ip6 daddr . udp dport . ether daddr
+perf_dst	addr6 port mac
+perf_src	 
+perf_entries	10
+perf_proto	ipv6
+"
+
+TYPE_net6_port_mac_proto="
+display		net6,port,mac,proto
+type_spec	ipv6_addr . inet_service . ether_addr . inet_proto
+chain_spec	ip6 daddr . udp dport . ether saddr . meta l4proto
+dst		addr6 port
+src		mac proto
+start		10
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp6
+
+race_repeat	0
+
+perf_duration	5
+perf_spec	ip6 daddr . udp dport . ether daddr . meta l4proto
+perf_dst	addr6 port mac proto
+perf_src	 
+perf_entries	1000
+perf_proto	ipv6
+"
+
+TYPE_net_port_net="
+display		net,port,net
+type_spec	ipv4_addr . inet_service . ipv4_addr
+chain_spec	ip daddr . udp dport . ip saddr
+dst		addr4 port
+src		addr4
+start		1
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	3
+flood_tools	iperf3 iperf netperf
+flood_proto	tcp
+flood_spec	ip daddr . udp dport . ip saddr
+
+perf_duration	0
+"
+
+TYPE_net6_port_net6_port="
+display		net6,port,net6,port
+type_spec	ipv6_addr . inet_service . ipv6_addr . inet_service
+chain_spec	ip6 daddr . udp dport . ip6 saddr . udp sport
+dst		addr6 port
+src		addr6 port
+start		10
+count		5
+src_delta	2000
+tools		sendip nc
+proto		udp6
+
+race_repeat	3
+flood_tools	iperf3 iperf netperf
+flood_proto	tcp6
+flood_spec	ip6 daddr . tcp dport . ip6 saddr . tcp sport
+
+perf_duration	0
+"
+
+TYPE_net_port_mac_proto_net="
+display		net,port,mac,proto,net
+type_spec	ipv4_addr . inet_service . ether_addr . inet_proto . ipv4_addr
+chain_spec	ip daddr . udp dport . ether saddr . meta l4proto . ip saddr
+dst		addr4 port
+src		mac proto addr4
+start		1
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	0
+
+perf_duration	0
+"
+
+TYPE_net_mac="
+display		net,mac
+type_spec	ipv4_addr . ether_addr
+chain_spec	ip daddr . ether saddr
+dst		addr4
+src		mac
+start		1
+count		5
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	0
+
+perf_duration	5
+perf_spec	ip daddr . ether daddr
+perf_dst	addr4 mac
+perf_src	 
+perf_entries	1000
+perf_proto	ipv4
+"
+
+TYPE_net_mac_icmp="
+display		net,mac - ICMP
+type_spec	ipv4_addr . ether_addr
+chain_spec	ip daddr . ether saddr
+dst		addr4
+src		mac
+start		1
+count		5
+src_delta	2000
+tools		ping
+proto		icmp
+
+race_repeat	0
+
+perf_duration	0
+"
+
+TYPE_net6_mac_icmp="
+display		net6,mac - ICMPv6
+type_spec	ipv6_addr . ether_addr
+chain_spec	ip6 daddr . ether saddr
+dst		addr6
+src		mac
+start		10
+count		50
+src_delta	2000
+tools		ping
+proto		icmp6
+
+race_repeat	0
+
+perf_duration	0
+"
+
+TYPE_net_port_proto_net="
+display		net,port,proto,net
+type_spec	ipv4_addr . inet_service . inet_proto . ipv4_addr
+chain_spec	ip daddr . udp dport . meta l4proto . ip saddr
+dst		addr4 port proto
+src		addr4
+start		1
+count		5
+src_delta	2000
+tools		sendip nc
+proto		udp
+
+race_repeat	3
+flood_tools	iperf3 iperf netperf
+flood_proto	tcp
+flood_spec	ip daddr . tcp dport . meta l4proto . ip saddr
+
+perf_duration	0
+"
+
+# Definition of tests for bugs reported in the past:
+# display	display text for test report
+TYPE_flush_remove_add="
+display		Add two elements, flush, re-add
+"
+
+TYPE_reload="
+display		net,mac with reload
+type_spec	ipv4_addr . ether_addr
+chain_spec	ip daddr . ether saddr
+dst		addr4
+src		mac
+start		1
+count		1
+src_delta	2000
+tools		sendip nc bash
+proto		udp
+
+race_repeat	0
+
+perf_duration	0
+"
+
+# Set template for all tests, types and rules are filled in depending on test
+set_template='
+flush ruleset
+
+table inet filter {
+	counter test {
+		packets 0 bytes 0
+	}
+
+	set test {
+		type ${type_spec}
+		flags interval,timeout
+	}
+
+	chain input {
+		type filter hook prerouting priority 0; policy accept;
+		${chain_spec} @test counter name \"test\"
+	}
+}
+
+table netdev perf {
+	counter test {
+		packets 0 bytes 0
+	}
+
+	counter match {
+		packets 0 bytes 0
+	}
+
+	set test {
+		type ${type_spec}
+		flags interval
+	}
+
+	set norange {
+		type ${type_spec}
+	}
+
+	set noconcat {
+		type ${type_spec%% *}
+		flags interval
+	}
+
+	chain test {
+		type filter hook ingress device veth_a priority 0;
+	}
+}
+'
+
+err_buf=
+info_buf=
+
+# Append string to error buffer
+err() {
+	err_buf="${err_buf}${1}
+"
+}
+
+# Append string to information buffer
+info() {
+	info_buf="${info_buf}${1}
+"
+}
+
+# Flush error buffer to stdout
+err_flush() {
+	printf "%s" "${err_buf}"
+	err_buf=
+}
+
+# Flush information buffer to stdout
+info_flush() {
+	printf "%s" "${info_buf}"
+	info_buf=
+}
+
+# Setup veth pair: this namespace receives traffic, B generates it
+setup_veth() {
+	ip netns add B
+	ip link add veth_a type veth peer name veth_b || return 1
+
+	ip link set veth_a up
+	ip link set veth_b netns B
+
+	ip -n B link set veth_b up
+
+	ip addr add dev veth_a 10.0.0.1
+	ip route add default dev veth_a
+
+	ip -6 addr add fe80::1/64 dev veth_a nodad
+	ip -6 addr add 2001:db8::1/64 dev veth_a nodad
+	ip -6 route add default dev veth_a
+
+	ip -n B route add default dev veth_b
+
+	ip -6 -n B addr add fe80::2/64 dev veth_b nodad
+	ip -6 -n B addr add 2001:db8::2/64 dev veth_b nodad
+	ip -6 -n B route add default dev veth_b
+
+	B() {
+		ip netns exec B "$@" >/dev/null 2>&1
+	}
+
+	sleep 2
+}
+
+# Fill in set template and initialise set
+setup_set() {
+	eval "echo \"${set_template}\"" | nft -f -
+}
+
+# Check that at least one of the needed tools is available
+check_tools() {
+	[ -z "${tools}" ] && return 0
+
+	__tools=
+	for tool in ${tools}; do
+		if [ "${tool}" = "nc" ] && [ "${proto}" = "udp6" ] && \
+		   ! nc -u -w0 1.1.1.1 1 2>/dev/null; then
+			# Some GNU netcat builds might not support IPv6
+			__tools="${__tools} netcat-openbsd"
+			continue
+		fi
+		__tools="${__tools} ${tool}"
+
+		command -v "${tool}" >/dev/null && return 0
+	done
+	err "need one of:${__tools}, skipping" && return 1
+}
+
+# Set up function to send ICMP packets
+setup_send_icmp() {
+	send_icmp() {
+		B ping -c1 -W1 "${dst_addr4}" >/dev/null 2>&1
+	}
+}
+
+# Set up function to send ICMPv6 packets
+setup_send_icmp6() {
+	if command -v ping6 >/dev/null; then
+		send_icmp6() {
+			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
+				2>/dev/null
+			B ping6 -q -c1 -W1 "${dst_addr6}"
+		}
+	else
+		send_icmp6() {
+			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
+				2>/dev/null
+			B ping -q -6 -c1 -W1 "${dst_addr6}"
+		}
+	fi
+}
+
+# Set up function to send single UDP packets on IPv4
+setup_send_udp() {
+	if command -v sendip >/dev/null; then
+		send_udp() {
+			[ -n "${src_port}" ] && src_port="-us ${src_port}"
+			[ -n "${dst_port}" ] && dst_port="-ud ${dst_port}"
+			[ -n "${src_addr4}" ] && src_addr4="-is ${src_addr4}"
+
+			# shellcheck disable=SC2086 # sendip needs split options
+			B sendip -p ipv4 -p udp ${src_addr4} ${src_port} \
+						${dst_port} "${dst_addr4}"
+
+			src_port=
+			dst_port=
+			src_addr4=
+		}
+	elif command -v nc >/dev/null; then
+		if nc -u -w0 1.1.1.1 1 2>/dev/null; then
+			# OpenBSD netcat
+			nc_opt="-w0"
+		else
+			# GNU netcat
+			nc_opt="-q0"
+		fi
+
+		send_udp() {
+			if [ -n "${src_addr4}" ]; then
+				B ip addr add "${src_addr4}" dev veth_b
+				__src_addr4="-s ${src_addr4}"
+			fi
+			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
+			[ -n "${src_port}" ] && src_port="-p ${src_port}"
+
+			echo "" | B nc -u "${nc_opt}" "${__src_addr4}" \
+				  "${src_port}" "${dst_addr4}" "${dst_port}"
+
+			src_addr4=
+			src_port=
+		}
+	elif [ -z "$(bash -c 'type -p')" ]; then
+		send_udp() {
+			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
+			if [ -n "${src_addr4}" ]; then
+				B ip addr add "${src_addr4}/16" dev veth_b
+				B ip route add default dev veth_b
+			fi
+
+			B bash -c "echo > /dev/udp/${dst_addr4}/${dst_port}"
+
+			if [ -n "${src_addr4}" ]; then
+				B ip addr del "${src_addr4}/16" dev veth_b
+			fi
+			src_addr4=
+		}
+	else
+		return 1
+	fi
+}
+
+# Set up function to send single UDP packets on IPv6
+setup_send_udp6() {
+	if command -v sendip >/dev/null; then
+		send_udp6() {
+			[ -n "${src_port}" ] && src_port="-us ${src_port}"
+			[ -n "${dst_port}" ] && dst_port="-ud ${dst_port}"
+			if [ -n "${src_addr6}" ]; then
+				src_addr6="-6s ${src_addr6}"
+			else
+				src_addr6="-6s 2001:db8::2"
+			fi
+			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
+				2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			B sendip -p ipv6 -p udp ${src_addr6} ${src_port} \
+						${dst_port} "${dst_addr6}"
+
+			src_port=
+			dst_port=
+			src_addr6=
+		}
+	elif command -v nc >/dev/null && nc -u -w0 1.1.1.1 1 2>/dev/null; then
+		# GNU netcat might not work with IPv6, try next tool
+		send_udp6() {
+			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
+				2>/dev/null
+			if [ -n "${src_addr6}" ]; then
+				B ip addr add "${src_addr6}" dev veth_b nodad
+			else
+				src_addr6="2001:db8::2"
+			fi
+			[ -n "${src_port}" ] && src_port="-p ${src_port}"
+
+			# shellcheck disable=SC2086 # this needs split options
+			echo "" | B nc -u w0 "-s${src_addr6}" ${src_port} \
+					       ${dst_addr6} ${dst_port}
+
+			src_addr6=
+			src_port=
+		}
+	elif [ -z "$(bash -c 'type -p')" ]; then
+		send_udp6() {
+			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
+				2>/dev/null
+			B ip addr add "${src_addr6}" dev veth_b nodad
+			B bash -c "echo > /dev/udp/${dst_addr6}/${dst_port}"
+			ip -6 addr del "${dst_addr6}" dev veth_a 2>/dev/null
+		}
+	else
+		return 1
+	fi
+}
+
+# Set up function to send TCP traffic on IPv4
+setup_flood_tcp() {
+	if command -v iperf3 >/dev/null; then
+		flood_tcp() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr4}" ]; then
+				B ip addr add "${src_addr4}/16" dev veth_b
+				src_addr4="-B ${src_addr4}"
+			else
+				B ip addr add dev veth_b 10.0.0.2
+				src_addr4="-B 10.0.0.2"
+			fi
+			if [ -n "${src_port}" ]; then
+				src_port="--cport ${src_port}"
+			fi
+			B ip route add default dev veth_b 2>/dev/null
+			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			iperf3 -s -DB "${dst_addr4}" ${dst_port} >/dev/null 2>&1
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B iperf3 -c "${dst_addr4}" ${dst_port} ${src_port} \
+				${src_addr4} -l16 -t 1000
+
+			src_addr4=
+			src_port=
+			dst_port=
+		}
+	elif command -v iperf >/dev/null; then
+		flood_tcp() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr4}" ]; then
+				B ip addr add "${src_addr4}/16" dev veth_b
+				src_addr4="-B ${src_addr4}"
+			else
+				B ip addr add dev veth_b 10.0.0.2 2>/dev/null
+				src_addr4="-B 10.0.0.2"
+			fi
+			if [ -n "${src_port}" ]; then
+				src_addr4="${src_addr4}:${src_port}"
+			fi
+			B ip route add default dev veth_b
+			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			iperf -s -DB "${dst_addr4}" ${dst_port} >/dev/null 2>&1
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B iperf -c "${dst_addr4}" ${dst_port} ${src_addr4} \
+				-l20 -t 1000
+
+			src_addr4=
+			src_port=
+			dst_port=
+		}
+	elif command -v netperf >/dev/null; then
+		flood_tcp() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr4}" ]; then
+				B ip addr add "${src_addr4}/16" dev veth_b
+			else
+				B ip addr add dev veth_b 10.0.0.2
+				src_addr4="10.0.0.2"
+			fi
+			if [ -n "${src_port}" ]; then
+				dst_port="${dst_port},${src_port}"
+			fi
+			B ip route add default dev veth_b
+			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			netserver -4 ${dst_port} -L "${dst_addr4}" \
+				>/dev/null 2>&1
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B netperf -4 -H "${dst_addr4}" ${dst_port} \
+				-L "${src_addr4}" -l 1000 -t TCP_STREAM
+
+			src_addr4=
+			src_port=
+			dst_port=
+		}
+	else
+		return 1
+	fi
+}
+
+# Set up function to send TCP traffic on IPv6
+setup_flood_tcp6() {
+	if command -v iperf3 >/dev/null; then
+		flood_tcp6() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr6}" ]; then
+				B ip addr add "${src_addr6}" dev veth_b nodad
+				src_addr6="-B ${src_addr6}"
+			else
+				src_addr6="-B 2001:db8::2"
+			fi
+			if [ -n "${src_port}" ]; then
+				src_port="--cport ${src_port}"
+			fi
+			B ip route add default dev veth_b
+			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
+				2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			iperf3 -s -DB "${dst_addr6}" ${dst_port} >/dev/null 2>&1
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B iperf3 -c "${dst_addr6}" ${dst_port} \
+				${src_port} ${src_addr6} -l16 -t 1000
+
+			src_addr6=
+			src_port=
+			dst_port=
+		}
+	elif command -v iperf >/dev/null; then
+		flood_tcp6() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr6}" ]; then
+				B ip addr add "${src_addr6}" dev veth_b nodad
+				src_addr6="-B ${src_addr6}"
+			else
+				src_addr6="-B 2001:db8::2"
+			fi
+			if [ -n "${src_port}" ]; then
+				src_addr6="${src_addr6}:${src_port}"
+			fi
+			B ip route add default dev veth_b
+			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
+				2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			iperf -s -VDB "${dst_addr6}" ${dst_port} >/dev/null 2>&1
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B iperf -c "${dst_addr6}" -V ${dst_port} \
+				${src_addr6} -l1 -t 1000
+
+			src_addr6=
+			src_port=
+			dst_port=
+		}
+	elif command -v netperf >/dev/null; then
+		flood_tcp6() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr6}" ]; then
+				B ip addr add "${src_addr6}" dev veth_b nodad
+			else
+				src_addr6="2001:db8::2"
+			fi
+			if [ -n "${src_port}" ]; then
+				dst_port="${dst_port},${src_port}"
+			fi
+			B ip route add default dev veth_b
+			ip -6 addr add "${dst_addr6}" dev veth_a nodad \
+				2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			netserver -6 ${dst_port} -L "${dst_addr6}" \
+				>/dev/null 2>&1
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B netperf -6 -H "${dst_addr6}" ${dst_port} \
+				-L "${src_addr6}" -l 1000 -t TCP_STREAM
+
+			src_addr6=
+			src_port=
+			dst_port=
+		}
+	else
+		return 1
+	fi
+}
+
+# Set up function to send UDP traffic on IPv4
+setup_flood_udp() {
+	if command -v iperf3 >/dev/null; then
+		flood_udp() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr4}" ]; then
+				B ip addr add "${src_addr4}/16" dev veth_b
+				src_addr4="-B ${src_addr4}"
+			else
+				B ip addr add dev veth_b 10.0.0.2 2>/dev/null
+				src_addr4="-B 10.0.0.2"
+			fi
+			if [ -n "${src_port}" ]; then
+				src_port="--cport ${src_port}"
+			fi
+			B ip route add default dev veth_b
+			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			iperf3 -s -DB "${dst_addr4}" ${dst_port}
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B iperf3 -u -c "${dst_addr4}" -Z -b 100M -l16 -t1000 \
+				${dst_port} ${src_port} ${src_addr4}
+
+			src_addr4=
+			src_port=
+			dst_port=
+		}
+	elif command -v iperf >/dev/null; then
+		flood_udp() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr4}" ]; then
+				B ip addr add "${src_addr4}/16" dev veth_b
+				src_addr4="-B ${src_addr4}"
+			else
+				B ip addr add dev veth_b 10.0.0.2
+				src_addr4="-B 10.0.0.2"
+			fi
+			if [ -n "${src_port}" ]; then
+				src_addr4="${src_addr4}:${src_port}"
+			fi
+			B ip route add default dev veth_b
+			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			iperf -u -sDB "${dst_addr4}" ${dst_port} >/dev/null 2>&1
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B iperf -u -c "${dst_addr4}" -b 100M -l1 -t1000 \
+				${dst_port} ${src_addr4}
+
+			src_addr4=
+			src_port=
+			dst_port=
+		}
+	elif command -v netperf >/dev/null; then
+		flood_udp() {
+			[ -n "${dst_port}" ] && dst_port="-p ${dst_port}"
+			if [ -n "${src_addr4}" ]; then
+				B ip addr add "${src_addr4}/16" dev veth_b
+			else
+				B ip addr add dev veth_b 10.0.0.2
+				src_addr4="10.0.0.2"
+			fi
+			if [ -n "${src_port}" ]; then
+				dst_port="${dst_port},${src_port}"
+			fi
+			B ip route add default dev veth_b
+			ip addr add "${dst_addr4}" dev veth_a 2>/dev/null
+
+			# shellcheck disable=SC2086 # this needs split options
+			netserver -4 ${dst_port} -L "${dst_addr4}" \
+				>/dev/null 2>&1
+			sleep 2
+
+			# shellcheck disable=SC2086 # this needs split options
+			B netperf -4 -H "${dst_addr4}" ${dst_port} \
+				-L "${src_addr4}" -l 1000 -t UDP_STREAM
+
+			src_addr4=
+			src_port=
+			dst_port=
+		}
+	else
+		return 1
+	fi
+}
+
+# Find pktgen script and set up function to start pktgen injection
+setup_perf() {
+	for pktgen_script_path in ${PKTGEN_SCRIPT_PATHS} __notfound; do
+		command -v "${pktgen_script_path}" >/dev/null && break
+	done
+	[ "${pktgen_script_path}" = "__notfound" ] && return 1
+
+	perf_ipv4() {
+		${pktgen_script_path} -s80 \
+			-i veth_a -d "${dst_addr4}" -p "${dst_port}" \
+			-m "${dst_mac}" \
+			-t $(($(nproc) / 5 + 1)) -b10000 -n0 2>/dev/null &
+		perf_pid=$!
+	}
+	perf_ipv6() {
+		IP6=6 ${pktgen_script_path} -s100 \
+			-i veth_a -d "${dst_addr6}" -p "${dst_port}" \
+			-m "${dst_mac}" \
+			-t $(($(nproc) / 5 + 1)) -b10000 -n0 2>/dev/null &
+		perf_pid=$!
+	}
+}
+
+# Clean up before each test
+cleanup() {
+	nft reset counter inet filter test	>/dev/null 2>&1
+	nft flush ruleset			>/dev/null 2>&1
+	ip link del dummy0			2>/dev/null
+	ip route del default			2>/dev/null
+	ip -6 route del default			2>/dev/null
+	ip netns del B				2>/dev/null
+	ip link del veth_a			2>/dev/null
+	timeout=
+	killall iperf3				2>/dev/null
+	killall iperf				2>/dev/null
+	killall netperf				2>/dev/null
+	killall netserver			2>/dev/null
+	rm -f ${tmp}
+	sleep 2
+}
+
+# Entry point for setup functions
+setup() {
+	if [ "$(id -u)" -ne 0 ]; then
+		echo "  need to run as root"
+		exit ${KSELFTEST_SKIP}
+	fi
+
+	cleanup
+	check_tools || return 1
+	for arg do
+		if ! eval setup_"${arg}"; then
+			err "  ${arg} not supported"
+			return 1
+		fi
+	done
+}
+
+# Format integer into IPv4 address, summing 10.0.0.5 (arbitrary) to it
+format_addr4() {
+	a=$((${1} + 16777216 * 10 + 5))
+	printf "%i.%i.%i.%i"						\
+	       "$((a / 16777216))" "$((a % 16777216 / 65536))"	\
+	       "$((a % 65536 / 256))" "$((a % 256))"
+}
+
+# Format integer into IPv6 address, summing 2001:db8:: to it
+format_addr6() {
+	printf "2001:db8::%04x:%04x" "$((${1} / 65536))" "$((${1} % 65536))"
+}
+
+# Format integer into EUI-48 address, summing 00:01:00:00:00:00 to it
+format_mac() {
+	printf "00:01:%02x:%02x:%02x:%02x" \
+	       "$((${1} / 16777216))" "$((${1} % 16777216 / 65536))"	\
+	       "$((${1} % 65536 / 256))" "$((${1} % 256))"
+}
+
+# Format integer into port, avoid 0 port
+format_port() {
+	printf "%i" "$((${1} % 65534 + 1))"
+}
+
+# Drop suffixed '6' from L4 protocol, if any
+format_proto() {
+	printf "%s" "${proto}" | tr -d 6
+}
+
+# Format destination and source fields into nft concatenated type
+format() {
+	__start=
+	__end=
+	__expr="{ "
+
+	for f in ${dst}; do
+		[ "${__expr}" != "{ " ] && __expr="${__expr} . "
+
+		__start="$(eval format_"${f}" "${start}")"
+		__end="$(eval format_"${f}" "${end}")"
+
+		if [ "${f}" = "proto" ]; then
+			__expr="${__expr}${__start}"
+		else
+			__expr="${__expr}${__start}-${__end}"
+		fi
+	done
+	for f in ${src}; do
+		__expr="${__expr} . "
+		__start="$(eval format_"${f}" "${srcstart}")"
+		__end="$(eval format_"${f}" "${srcend}")"
+
+		if [ "${f}" = "proto" ]; then
+			__expr="${__expr}${__start}"
+		else
+			__expr="${__expr}${__start}-${__end}"
+		fi
+	done
+
+	if [ -n "${timeout}" ]; then
+		echo "${__expr} timeout ${timeout}s }"
+	else
+		echo "${__expr} }"
+	fi
+}
+
+# Format destination and source fields into nft type, start element only
+format_norange() {
+	__expr="{ "
+
+	for f in ${dst}; do
+		[ "${__expr}" != "{ " ] && __expr="${__expr} . "
+
+		__expr="${__expr}$(eval format_"${f}" "${start}")"
+	done
+	for f in ${src}; do
+		__expr="${__expr} . $(eval format_"${f}" "${start}")"
+	done
+
+	echo "${__expr} }"
+}
+
+# Format first destination field into nft type
+format_noconcat() {
+	for f in ${dst}; do
+		__start="$(eval format_"${f}" "${start}")"
+		__end="$(eval format_"${f}" "${end}")"
+
+		if [ "${f}" = "proto" ]; then
+			echo "{ ${__start} }"
+		else
+			echo "{ ${__start}-${__end} }"
+		fi
+		return
+	done
+}
+
+# Add single entry to 'test' set in 'inet filter' table
+add() {
+	if ! nft add element inet filter test "${1}"; then
+		err "Failed to add ${1} given ruleset:"
+		err "$(nft -a list ruleset)"
+		return 1
+	fi
+}
+
+# Format and output entries for sets in 'netdev perf' table
+add_perf() {
+	if [ "${1}" = "test" ]; then
+		echo "add element netdev perf test $(format)"
+	elif [ "${1}" = "norange" ]; then
+		echo "add element netdev perf norange $(format_norange)"
+	elif [ "${1}" = "noconcat" ]; then
+		echo "add element netdev perf noconcat $(format_noconcat)"
+	fi
+}
+
+# Add single entry to 'norange' set in 'netdev perf' table
+add_perf_norange() {
+	if ! nft add element netdev perf norange "${1}"; then
+		err "Failed to add ${1} given ruleset:"
+		err "$(nft -a list ruleset)"
+		return 1
+	fi
+}
+
+# Add single entry to 'noconcat' set in 'netdev perf' table
+add_perf_noconcat() {
+	if ! nft add element netdev perf noconcat "${1}"; then
+		err "Failed to add ${1} given ruleset:"
+		err "$(nft -a list ruleset)"
+		return 1
+	fi
+}
+
+# Delete single entry from set
+del() {
+	if ! nft delete element inet filter test "${1}"; then
+		err "Failed to delete ${1} given ruleset:"
+		err "$(nft -a list ruleset)"
+		return 1
+	fi
+}
+
+# Return packet count from 'test' counter in 'inet filter' table
+count_packets() {
+	found=0
+	for token in $(nft list counter inet filter test); do
+		[ ${found} -eq 1 ] && echo "${token}" && return
+		[ "${token}" = "packets" ] && found=1
+	done
+}
+
+# Return packet count from 'test' counter in 'netdev perf' table
+count_perf_packets() {
+	found=0
+	for token in $(nft list counter netdev perf test); do
+		[ ${found} -eq 1 ] && echo "${token}" && return
+		[ "${token}" = "packets" ] && found=1
+	done
+}
+
+# Set MAC addresses, send traffic according to specifier
+flood() {
+	ip link set veth_a address "$(format_mac "${1}")"
+	ip -n B link set veth_b address "$(format_mac "${2}")"
+
+	for f in ${dst}; do
+		eval dst_"$f"=\$\(format_\$f "${1}"\)
+	done
+	for f in ${src}; do
+		eval src_"$f"=\$\(format_\$f "${2}"\)
+	done
+	eval flood_\$proto
+}
+
+# Set MAC addresses, start pktgen injection
+perf() {
+	dst_mac="$(format_mac "${1}")"
+	ip link set veth_a address "${dst_mac}"
+
+	for f in ${dst}; do
+		eval dst_"$f"=\$\(format_\$f "${1}"\)
+	done
+	for f in ${src}; do
+		eval src_"$f"=\$\(format_\$f "${2}"\)
+	done
+	eval perf_\$perf_proto
+}
+
+# Set MAC addresses, send single packet, check that it matches, reset counter
+send_match() {
+	ip link set veth_a address "$(format_mac "${1}")"
+	ip -n B link set veth_b address "$(format_mac "${2}")"
+
+	for f in ${dst}; do
+		eval dst_"$f"=\$\(format_\$f "${1}"\)
+	done
+	for f in ${src}; do
+		eval src_"$f"=\$\(format_\$f "${2}"\)
+	done
+	eval send_\$proto
+	if [ "$(count_packets)" != "1" ]; then
+		err "${proto} packet to:"
+		err "  $(for f in ${dst}; do
+			 eval format_\$f "${1}"; printf ' '; done)"
+		err "from:"
+		err "  $(for f in ${src}; do
+			 eval format_\$f "${2}"; printf ' '; done)"
+		err "should have matched ruleset:"
+		err "$(nft -a list ruleset)"
+		return 1
+	fi
+	nft reset counter inet filter test >/dev/null
+}
+
+# Set MAC addresses, send single packet, check that it doesn't match
+send_nomatch() {
+	ip link set veth_a address "$(format_mac "${1}")"
+	ip -n B link set veth_b address "$(format_mac "${2}")"
+
+	for f in ${dst}; do
+		eval dst_"$f"=\$\(format_\$f "${1}"\)
+	done
+	for f in ${src}; do
+		eval src_"$f"=\$\(format_\$f "${2}"\)
+	done
+	eval send_\$proto
+	if [ "$(count_packets)" != "0" ]; then
+		err "${proto} packet to:"
+		err "  $(for f in ${dst}; do
+			 eval format_\$f "${1}"; printf ' '; done)"
+		err "from:"
+		err "  $(for f in ${src}; do
+			 eval format_\$f "${2}"; printf ' '; done)"
+		err "should not have matched ruleset:"
+		err "$(nft -a list ruleset)"
+		return 1
+	fi
+}
+
+# Correctness test template:
+# - add ranged element, check that packets match it
+# - check that packets outside range don't match it
+# - remove some elements, check that packets don't match anymore
+test_correctness() {
+	setup veth send_"${proto}" set || return ${KSELFTEST_SKIP}
+
+	range_size=1
+	for i in $(seq "${start}" $((start + count))); do
+		end=$((start + range_size))
+
+		# Avoid negative or zero-sized port ranges
+		if [ $((end / 65534)) -gt $((start / 65534)) ]; then
+			start=${end}
+			end=$((end + 1))
+		fi
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		add "$(format)" || return 1
+		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+			send_match "${j}" $((j + src_delta)) || return 1
+		done
+		send_nomatch $((end + 1)) $((end + 1 + src_delta)) || return 1
+
+		# Delete elements now and then
+		if [ $((i % 3)) -eq 0 ]; then
+			del "$(format)" || return 1
+			for j in $(seq ${start} \
+				   $((range_size / 2 + 1)) ${end}); do
+				send_nomatch "${j}" $((j + src_delta)) \
+					|| return 1
+			done
+		fi
+
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+}
+
+# Concurrency test template:
+# - add all the elements
+# - start a thread for each physical thread that:
+#   - adds all the elements
+#   - flushes the set
+#   - adds all the elements
+#   - flushes the entire ruleset
+#   - adds the set back
+#   - adds all the elements
+#   - delete all the elements
+test_concurrency() {
+	proto=${flood_proto}
+	tools=${flood_tools}
+	chain_spec=${flood_spec}
+	setup veth flood_"${proto}" set || return ${KSELFTEST_SKIP}
+
+	range_size=1
+	cstart=${start}
+	flood_pids=
+	for i in $(seq ${start} $((start + count))); do
+		end=$((start + range_size))
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		add "$(format)" || return 1
+
+		flood "${i}" $((i + src_delta)) & flood_pids="${flood_pids} $!"
+
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+
+	sleep 10
+
+	pids=
+	for c in $(seq 1 "$(nproc)"); do (
+		for r in $(seq 1 "${race_repeat}"); do
+			range_size=1
+
+			# $start needs to be local to this subshell
+			# shellcheck disable=SC2030
+			start=${cstart}
+			for i in $(seq ${start} $((start + count))); do
+				end=$((start + range_size))
+				srcstart=$((start + src_delta))
+				srcend=$((end + src_delta))
+
+				add "$(format)" 2>/dev/null
+
+				range_size=$((range_size + 1))
+				start=$((end + range_size))
+			done
+
+			nft flush inet filter test 2>/dev/null
+
+			range_size=1
+			start=${cstart}
+			for i in $(seq ${start} $((start + count))); do
+				end=$((start + range_size))
+				srcstart=$((start + src_delta))
+				srcend=$((end + src_delta))
+
+				add "$(format)" 2>/dev/null
+
+				range_size=$((range_size + 1))
+				start=$((end + range_size))
+			done
+
+			nft flush ruleset
+			setup set 2>/dev/null
+
+			range_size=1
+			start=${cstart}
+			for i in $(seq ${start} $((start + count))); do
+				end=$((start + range_size))
+				srcstart=$((start + src_delta))
+				srcend=$((end + src_delta))
+
+				add "$(format)" 2>/dev/null
+
+				range_size=$((range_size + 1))
+				start=$((end + range_size))
+			done
+
+			range_size=1
+			start=${cstart}
+			for i in $(seq ${start} $((start + count))); do
+				end=$((start + range_size))
+				srcstart=$((start + src_delta))
+				srcend=$((end + src_delta))
+
+				del "$(format)" 2>/dev/null
+
+				range_size=$((range_size + 1))
+				start=$((end + range_size))
+			done
+		done
+	) & pids="${pids} $!"
+	done
+
+	# shellcheck disable=SC2046,SC2086 # word splitting wanted here
+	wait $(for pid in ${pids}; do echo ${pid}; done)
+	# shellcheck disable=SC2046,SC2086
+	kill $(for pid in ${flood_pids}; do echo ${pid}; done) 2>/dev/null
+	# shellcheck disable=SC2046,SC2086
+	wait $(for pid in ${flood_pids}; do echo ${pid}; done) 2>/dev/null
+
+	return 0
+}
+
+# Timeout test template:
+# - add all the elements with 3s timeout while checking that packets match
+# - wait 3s after the last insertion, check that packets don't match any entry
+test_timeout() {
+	setup veth send_"${proto}" set || return ${KSELFTEST_SKIP}
+
+	timeout=3
+	range_size=1
+	for i in $(seq "${start}" $((start + count))); do
+		end=$((start + range_size))
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		add "$(format)" || return 1
+
+		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+			send_match "${j}" $((j + src_delta)) || return 1
+		done
+
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+	sleep 3
+	for i in $(seq ${start} $((start + count))); do
+		end=$((start + range_size))
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+			send_nomatch "${j}" $((j + src_delta)) || return 1
+		done
+
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+}
+
+# Performance test template:
+# - add concatenated ranged entries
+# - add non-ranged concatenated entries (for hash set matching rate baseline)
+# - add ranged entries with first field only (for rbhash baseline)
+# - start pktgen injection directly on device rx path of this namespace
+# - measure drop only rate, hash and rbtree baselines, then matching rate
+test_performance() {
+	chain_spec=${perf_spec}
+	dst="${perf_dst}"
+	src="${perf_src}"
+	setup veth perf set || return ${KSELFTEST_SKIP}
+
+	first=${start}
+	range_size=1
+	for set in test norange noconcat; do
+		start=${first}
+		for i in $(seq ${start} $((start + perf_entries))); do
+			end=$((start + range_size))
+			srcstart=$((start + src_delta))
+			srcend=$((end + src_delta))
+
+			if [ $((end / 65534)) -gt $((start / 65534)) ]; then
+				start=${end}
+				end=$((end + 1))
+			elif [ ${start} -eq ${end} ]; then
+				end=$((start + 1))
+			fi
+
+			add_perf ${set}
+
+			start=$((end + range_size))
+		done > "${tmp}"
+		nft -f "${tmp}"
+	done
+
+	perf $((end - 1)) ${srcstart}
+
+	sleep 2
+
+	nft add rule netdev perf test counter name \"test\" drop
+	nft reset counter netdev perf test >/dev/null 2>&1
+	sleep "${perf_duration}"
+	pps="$(printf %10s $(($(count_perf_packets) / perf_duration)))"
+	info "    baseline (drop from netdev hook):            ${pps}pps"
+	handle="$(nft -a list chain netdev perf test | grep counter)"
+	handle="${handle##* }"
+	nft delete rule netdev perf test handle "${handle}"
+
+	nft add rule "netdev perf test ${chain_spec} @norange \
+		counter name \"test\" drop"
+	nft reset counter netdev perf test >/dev/null 2>&1
+	sleep "${perf_duration}"
+	pps="$(printf %10s $(($(count_perf_packets) / perf_duration)))"
+	info "    baseline hash (non-ranged entries):          ${pps}pps"
+	handle="$(nft -a list chain netdev perf test | grep counter)"
+	handle="${handle##* }"
+	nft delete rule netdev perf test handle "${handle}"
+
+	nft add rule "netdev perf test ${chain_spec%%. *} @noconcat \
+		counter name \"test\" drop"
+	nft reset counter netdev perf test >/dev/null 2>&1
+	sleep "${perf_duration}"
+	pps="$(printf %10s $(($(count_perf_packets) / perf_duration)))"
+	info "    baseline rbtree (match on first field only): ${pps}pps"
+	handle="$(nft -a list chain netdev perf test | grep counter)"
+	handle="${handle##* }"
+	nft delete rule netdev perf test handle "${handle}"
+
+	nft add rule "netdev perf test ${chain_spec} @test \
+		counter name \"test\" drop"
+	nft reset counter netdev perf test >/dev/null 2>&1
+	sleep "${perf_duration}"
+	pps="$(printf %10s $(($(count_perf_packets) / perf_duration)))"
+	p5="$(printf %5s "${perf_entries}")"
+	info "    set with ${p5} full, ranged entries:         ${pps}pps"
+	kill "${perf_pid}"
+}
+
+test_bug_flush_remove_add() {
+	set_cmd='{ set s { type ipv4_addr . inet_service; flags interval; }; }'
+	elem1='{ 10.0.0.1 . 22-25, 10.0.0.1 . 10-20 }'
+	elem2='{ 10.0.0.1 . 10-20, 10.0.0.1 . 22-25 }'
+	for i in `seq 1 100`; do
+		nft add table t ${set_cmd}	|| return ${KSELFTEST_SKIP}
+		nft add element t s ${elem1}	2>/dev/null || return 1
+		nft flush set t s		2>/dev/null || return 1
+		nft add element t s ${elem2}	2>/dev/null || return 1
+	done
+	nft flush ruleset
+}
+
+# - add ranged element, check that packets match it
+# - reload the set, check packets still match
+test_bug_reload() {
+	setup veth send_"${proto}" set || return ${KSELFTEST_SKIP}
+	rstart=${start}
+
+	range_size=1
+	for i in $(seq "${start}" $((start + count))); do
+		end=$((start + range_size))
+
+		# Avoid negative or zero-sized port ranges
+		if [ $((end / 65534)) -gt $((start / 65534)) ]; then
+			start=${end}
+			end=$((end + 1))
+		fi
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		add "$(format)" || return 1
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+
+	# check kernel does allocate pcpu sctrach map
+	# for reload with no elemet add/delete
+	( echo flush set inet filter test ;
+	  nft list set inet filter test ) | nft -f -
+
+	start=${rstart}
+	range_size=1
+
+	for i in $(seq "${start}" $((start + count))); do
+		end=$((start + range_size))
+
+		# Avoid negative or zero-sized port ranges
+		if [ $((end / 65534)) -gt $((start / 65534)) ]; then
+			start=${end}
+			end=$((end + 1))
+		fi
+		srcstart=$((start + src_delta))
+		srcend=$((end + src_delta))
+
+		for j in $(seq ${start} $((range_size / 2 + 1)) ${end}); do
+			send_match "${j}" $((j + src_delta)) || return 1
+		done
+
+		range_size=$((range_size + 1))
+		start=$((end + range_size))
+	done
+
+	nft flush ruleset
+}
+
+test_reported_issues() {
+	eval test_bug_"${subtest}"
+}
+
+# Run everything in a separate network namespace
+[ "${1}" != "run" ] && { unshare -n "${0}" run; exit $?; }
+tmp="$(mktemp)"
+trap cleanup EXIT
+
+# Entry point for test runs
+passed=0
+for name in ${TESTS}; do
+	printf "TEST: %s\n" "$(echo ${name} | tr '_' ' ')"
+	if [ "${name}" = "reported_issues" ]; then
+		SUBTESTS="${BUGS}"
+	else
+		SUBTESTS="${TYPES}"
+	fi
+
+	for subtest in ${SUBTESTS}; do
+		eval desc=\$TYPE_"${subtest}"
+		IFS='
+'
+		for __line in ${desc}; do
+			# shellcheck disable=SC2086
+			eval ${__line%%	*}=\"${__line##*	}\";
+		done
+		IFS=' 	
+'
+
+		if [ "${name}" = "concurrency" ] && \
+		   [ "${race_repeat}" = "0" ]; then
+			continue
+		fi
+		if [ "${name}" = "performance" ] && \
+		   [ "${perf_duration}" = "0" ]; then
+			continue
+		fi
+
+		printf "  %-60s  " "${display}"
+		eval test_"${name}"
+		ret=$?
+
+		if [ $ret -eq 0 ]; then
+			printf "[ OK ]\n"
+			info_flush
+			passed=$((passed + 1))
+		elif [ $ret -eq 1 ]; then
+			printf "[FAIL]\n"
+			err_flush
+			exit 1
+		elif [ $ret -eq ${KSELFTEST_SKIP} ]; then
+			printf "[SKIP]\n"
+			err_flush
+		fi
+	done
+done
+
+[ ${passed} -eq 0 ] && exit ${KSELFTEST_SKIP} || exit 0
diff --git a/tools/testing/selftests/netfilter/nft_conntrack_helper.sh b/tools/testing/selftests/netfilter/nft_conntrack_helper.sh
new file mode 100755
index 000000000..bf6b9626c
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_conntrack_helper.sh
@@ -0,0 +1,181 @@
+#!/bin/bash
+#
+# This tests connection tracking helper assignment:
+# 1. can attach ftp helper to a connection from nft ruleset.
+# 2. auto-assign still works.
+#
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+testipv6=1
+
+cleanup()
+{
+	ip netns del ${ns1}
+	ip netns del ${ns2}
+}
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+conntrack -V > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without conntrack tool"
+	exit $ksft_skip
+fi
+
+which nc >/dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without netcat tool"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+ip netns add ${ns1}
+ip netns add ${ns2}
+
+ip link add veth0 netns ${ns1} type veth peer name veth0 netns ${ns2} > /dev/null 2>&1
+if [ $? -ne 0 ];then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
+
+ip -net ${ns1} link set lo up
+ip -net ${ns1} link set veth0 up
+
+ip -net ${ns2} link set lo up
+ip -net ${ns2} link set veth0 up
+
+ip -net ${ns1} addr add 10.0.1.1/24 dev veth0
+ip -net ${ns1} addr add dead:1::1/64 dev veth0
+
+ip -net ${ns2} addr add 10.0.1.2/24 dev veth0
+ip -net ${ns2} addr add dead:1::2/64 dev veth0
+
+load_ruleset_family() {
+	local family=$1
+	local ns=$2
+
+ip netns exec ${ns} nft -f - <<EOF
+table $family raw {
+	ct helper ftp {
+             type "ftp" protocol tcp
+        }
+	chain pre {
+		type filter hook prerouting priority 0; policy accept;
+		tcp dport 2121 ct helper set "ftp"
+	}
+	chain output {
+		type filter hook output priority 0; policy accept;
+		tcp dport 2121 ct helper set "ftp"
+	}
+}
+EOF
+	return $?
+}
+
+check_for_helper()
+{
+	local netns=$1
+	local message=$2
+	local port=$3
+
+	if echo $message |grep -q 'ipv6';then
+		local family="ipv6"
+	else
+		local family="ipv4"
+	fi
+
+	ip netns exec ${netns} conntrack -L -f $family -p tcp --dport $port 2> /dev/null |grep -q 'helper=ftp'
+	if [ $? -ne 0 ] ; then
+		echo "FAIL: ${netns} did not show attached helper $message" 1>&2
+		ret=1
+	fi
+
+	echo "PASS: ${netns} connection on port $port has ftp helper attached" 1>&2
+	return 0
+}
+
+test_helper()
+{
+	local port=$1
+	local msg=$2
+
+	sleep 3 | ip netns exec ${ns2} nc -w 2 -l -p $port > /dev/null &
+
+	sleep 1 | ip netns exec ${ns1} nc -w 2 10.0.1.2 $port > /dev/null &
+	sleep 1
+
+	check_for_helper "$ns1" "ip $msg" $port
+	check_for_helper "$ns2" "ip $msg" $port
+
+	wait
+
+	if [ $testipv6 -eq 0 ] ;then
+		return 0
+	fi
+
+	ip netns exec ${ns1} conntrack -F 2> /dev/null
+	ip netns exec ${ns2} conntrack -F 2> /dev/null
+
+	sleep 3 | ip netns exec ${ns2} nc -w 2 -6 -l -p $port > /dev/null &
+
+	sleep 1 | ip netns exec ${ns1} nc -w 2 -6 dead:1::2 $port > /dev/null &
+	sleep 1
+
+	check_for_helper "$ns1" "ipv6 $msg" $port
+	check_for_helper "$ns2" "ipv6 $msg" $port
+
+	wait
+}
+
+load_ruleset_family ip ${ns1}
+if [ $? -ne 0 ];then
+	echo "FAIL: ${ns1} cannot load ip ruleset" 1>&2
+	exit 1
+fi
+
+load_ruleset_family ip6 ${ns1}
+if [ $? -ne 0 ];then
+	echo "SKIP: ${ns1} cannot load ip6 ruleset" 1>&2
+	testipv6=0
+fi
+
+load_ruleset_family inet ${ns2}
+if [ $? -ne 0 ];then
+	echo "SKIP: ${ns1} cannot load inet ruleset" 1>&2
+	load_ruleset_family ip ${ns2}
+	if [ $? -ne 0 ];then
+		echo "FAIL: ${ns2} cannot load ip ruleset" 1>&2
+		exit 1
+	fi
+
+	if [ $testipv6 -eq 1 ] ;then
+		load_ruleset_family ip6 ${ns2}
+		if [ $? -ne 0 ];then
+			echo "FAIL: ${ns2} cannot load ip6 ruleset" 1>&2
+			exit 1
+		fi
+	fi
+fi
+
+test_helper 2121 "set via ruleset"
+ip netns exec ${ns1} sysctl -q 'net.netfilter.nf_conntrack_helper=1'
+ip netns exec ${ns2} sysctl -q 'net.netfilter.nf_conntrack_helper=1'
+test_helper 21 "auto-assign"
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh
new file mode 100755
index 000000000..aefe50e0e
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
@@ -0,0 +1,420 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# This tests basic flowtable functionality.
+# Creates following default topology:
+#
+# Originator (MTU 9000) <-Router1-> MTU 1500 <-Router2-> Responder (MTU 2000)
+# Router1 is the one doing flow offloading, Router2 has no special
+# purpose other than having a link that is smaller than either Originator
+# and responder, i.e. TCPMSS announced values are too large and will still
+# result in fragmentation and/or PMTU discovery.
+#
+# You can check with different Orgininator/Link/Responder MTU eg:
+# nft_flowtable.sh -o8000 -l1500 -r2000
+#
+
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+ns1in=""
+ns2in=""
+ns1out=""
+ns2out=""
+
+log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
+
+checktool (){
+	if ! $1 > /dev/null 2>&1; then
+		echo "SKIP: Could not $2"
+		exit $ksft_skip
+	fi
+}
+
+checktool "nft --version" "run test without nft tool"
+checktool "ip -Version" "run test without ip tool"
+checktool "which nc" "run test without nc (netcat)"
+checktool "ip netns add nsr1" "create net namespace"
+
+ip netns add ns1
+ip netns add ns2
+
+ip netns add nsr2
+
+cleanup() {
+	for i in 1 2; do
+		ip netns del ns$i
+		ip netns del nsr$i
+	done
+
+	rm -f "$ns1in" "$ns1out"
+	rm -f "$ns2in" "$ns2out"
+
+	[ $log_netns -eq 0 ] && sysctl -q net.netfilter.nf_log_all_netns=$log_netns
+}
+
+trap cleanup EXIT
+
+sysctl -q net.netfilter.nf_log_all_netns=1
+
+ip link add veth0 netns nsr1 type veth peer name eth0 netns ns1
+ip link add veth1 netns nsr1 type veth peer name veth0 netns nsr2
+
+ip link add veth1 netns nsr2 type veth peer name eth0 netns ns2
+
+for dev in lo veth0 veth1; do
+  for i in 1 2; do
+    ip -net nsr$i link set $dev up
+  done
+done
+
+ip -net nsr1 addr add 10.0.1.1/24 dev veth0
+ip -net nsr1 addr add dead:1::1/64 dev veth0
+
+ip -net nsr2 addr add 10.0.2.1/24 dev veth1
+ip -net nsr2 addr add dead:2::1/64 dev veth1
+
+# set different MTUs so we need to push packets coming from ns1 (large MTU)
+# to ns2 (smaller MTU) to stack either to perform fragmentation (ip_no_pmtu_disc=1),
+# or to do PTMU discovery (send ICMP error back to originator).
+# ns2 is going via nsr2 with a smaller mtu, so that TCPMSS announced by both peers
+# is NOT the lowest link mtu.
+
+omtu=9000
+lmtu=1500
+rmtu=2000
+
+usage(){
+	echo "nft_flowtable.sh [OPTIONS]"
+	echo
+	echo "MTU options"
+	echo "   -o originator"
+	echo "   -l link"
+	echo "   -r responder"
+	exit 1
+}
+
+while getopts "o:l:r:" o
+do
+	case $o in
+		o) omtu=$OPTARG;;
+		l) lmtu=$OPTARG;;
+		r) rmtu=$OPTARG;;
+		*) usage;;
+	esac
+done
+
+if ! ip -net nsr1 link set veth0 mtu $omtu; then
+	exit 1
+fi
+
+ip -net ns1 link set eth0 mtu $omtu
+
+if ! ip -net nsr2 link set veth1 mtu $rmtu; then
+	exit 1
+fi
+
+ip -net ns2 link set eth0 mtu $rmtu
+
+# transfer-net between nsr1 and nsr2.
+# these addresses are not used for connections.
+ip -net nsr1 addr add 192.168.10.1/24 dev veth1
+ip -net nsr1 addr add fee1:2::1/64 dev veth1
+
+ip -net nsr2 addr add 192.168.10.2/24 dev veth0
+ip -net nsr2 addr add fee1:2::2/64 dev veth0
+
+for i in 1 2; do
+  ip netns exec nsr$i sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+  ip netns exec nsr$i sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+  ip -net ns$i link set lo up
+  ip -net ns$i link set eth0 up
+  ip -net ns$i addr add 10.0.$i.99/24 dev eth0
+  ip -net ns$i route add default via 10.0.$i.1
+  ip -net ns$i addr add dead:$i::99/64 dev eth0
+  ip -net ns$i route add default via dead:$i::1
+  if ! ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then
+	echo "ERROR: Check Originator/Responder values (problem during address addition)"
+	exit 1
+  fi
+
+  # don't set ip DF bit for first two tests
+  ip netns exec ns$i sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null
+done
+
+ip -net nsr1 route add default via 192.168.10.2
+ip -net nsr2 route add default via 192.168.10.1
+
+ip netns exec nsr1 nft -f - <<EOF
+table inet filter {
+  flowtable f1 {
+     hook ingress priority 0
+     devices = { veth0, veth1 }
+   }
+
+   chain forward {
+      type filter hook forward priority 0; policy drop;
+
+      # flow offloaded? Tag ct with mark 1, so we can detect when it fails.
+      meta oif "veth1" tcp dport 12345 flow offload @f1 counter
+
+      # use packet size to trigger 'should be offloaded by now'.
+      # otherwise, if 'flow offload' expression never offloads, the
+      # test will pass.
+      tcp dport 12345 meta length gt 200 ct mark set 1 counter
+
+      # this turns off flow offloading internally, so expect packets again
+      tcp flags fin,rst ct mark set 0 accept
+
+      # this allows large packets from responder, we need this as long
+      # as PMTUd is off.
+      # This rule is deleted for the last test, when we expect PMTUd
+      # to kick in and ensure all packets meet mtu requirements.
+      meta length gt $lmtu accept comment something-to-grep-for
+
+      # next line blocks connection w.o. working offload.
+      # we only do this for reverse dir, because we expect packets to
+      # enter slow path due to MTU mismatch of veth0 and veth1.
+      tcp sport 12345 ct mark 1 counter log prefix "mark failure " drop
+
+      ct state established,related accept
+
+      # for packets that we can't offload yet, i.e. SYN (any ct that is not confirmed)
+      meta length lt 200 oif "veth1" tcp dport 12345 counter accept
+
+      meta nfproto ipv4 meta l4proto icmp accept
+      meta nfproto ipv6 meta l4proto icmpv6 accept
+   }
+}
+EOF
+
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not load nft ruleset"
+	exit $ksft_skip
+fi
+
+# test basic connectivity
+if ! ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then
+  echo "ERROR: ns1 cannot reach ns2" 1>&2
+  exit 1
+fi
+
+if ! ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then
+  echo "ERROR: ns2 cannot reach ns1" 1>&2
+  exit 1
+fi
+
+if [ $ret -eq 0 ];then
+	echo "PASS: netns routing/connectivity: ns1 can reach ns2"
+fi
+
+ns1in=$(mktemp)
+ns1out=$(mktemp)
+ns2in=$(mktemp)
+ns2out=$(mktemp)
+
+make_file()
+{
+	name=$1
+
+	SIZE=$((RANDOM % (1024 * 8)))
+	TSIZE=$((SIZE * 1024))
+
+	dd if=/dev/urandom of="$name" bs=1024 count=$SIZE 2> /dev/null
+
+	SIZE=$((RANDOM % 1024))
+	SIZE=$((SIZE + 128))
+	TSIZE=$((TSIZE + SIZE))
+	dd if=/dev/urandom conf=notrunc of="$name" bs=1 count=$SIZE 2> /dev/null
+}
+
+check_transfer()
+{
+	in=$1
+	out=$2
+	what=$3
+
+	if ! cmp "$in" "$out" > /dev/null 2>&1; then
+		echo "FAIL: file mismatch for $what" 1>&2
+		ls -l "$in"
+		ls -l "$out"
+		return 1
+	fi
+
+	return 0
+}
+
+test_tcp_forwarding_ip()
+{
+	local nsa=$1
+	local nsb=$2
+	local dstip=$3
+	local dstport=$4
+	local lret=0
+
+	ip netns exec $nsb nc -w 5 -l -p 12345 < "$ns2in" > "$ns2out" &
+	lpid=$!
+
+	sleep 1
+	ip netns exec $nsa nc -w 4 "$dstip" "$dstport" < "$ns1in" > "$ns1out" &
+	cpid=$!
+
+	sleep 3
+
+	if ps -p $lpid > /dev/null;then
+		kill $lpid
+	fi
+
+	if ps -p $cpid > /dev/null;then
+		kill $cpid
+	fi
+
+	wait
+
+	if ! check_transfer "$ns1in" "$ns2out" "ns1 -> ns2"; then
+		lret=1
+	fi
+
+	if ! check_transfer "$ns2in" "$ns1out" "ns1 <- ns2"; then
+		lret=1
+	fi
+
+	return $lret
+}
+
+test_tcp_forwarding()
+{
+	test_tcp_forwarding_ip "$1" "$2" 10.0.2.99 12345
+
+	return $?
+}
+
+test_tcp_forwarding_nat()
+{
+	local lret
+
+	test_tcp_forwarding_ip "$1" "$2" 10.0.2.99 12345
+	lret=$?
+
+	if [ $lret -eq 0 ] ; then
+		test_tcp_forwarding_ip "$1" "$2" 10.6.6.6 1666
+		lret=$?
+	fi
+
+	return $lret
+}
+
+make_file "$ns1in"
+make_file "$ns2in"
+
+# First test:
+# No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed.
+if test_tcp_forwarding ns1 ns2; then
+	echo "PASS: flow offloaded for ns1/ns2"
+else
+	echo "FAIL: flow offload for ns1/ns2:" 1>&2
+	ip netns exec nsr1 nft list ruleset
+	ret=1
+fi
+
+# delete default route, i.e. ns2 won't be able to reach ns1 and
+# will depend on ns1 being masqueraded in nsr1.
+# expect ns1 has nsr1 address.
+ip -net ns2 route del default via 10.0.2.1
+ip -net ns2 route del default via dead:2::1
+ip -net ns2 route add 192.168.10.1 via 10.0.2.1
+
+# Second test:
+# Same, but with NAT enabled.
+ip netns exec nsr1 nft -f - <<EOF
+table ip nat {
+   chain prerouting {
+      type nat hook prerouting priority 0; policy accept;
+      meta iif "veth0" ip daddr 10.6.6.6 tcp dport 1666 counter dnat ip to 10.0.2.99:12345
+   }
+
+   chain postrouting {
+      type nat hook postrouting priority 0; policy accept;
+      meta oifname "veth1" counter masquerade
+   }
+}
+EOF
+
+if test_tcp_forwarding_nat ns1 ns2; then
+	echo "PASS: flow offloaded for ns1/ns2 with NAT"
+else
+	echo "FAIL: flow offload for ns1/ns2 with NAT" 1>&2
+	ip netns exec nsr1 nft list ruleset
+	ret=1
+fi
+
+# Third test:
+# Same as second test, but with PMTU discovery enabled.
+handle=$(ip netns exec nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2)
+
+if ! ip netns exec nsr1 nft delete rule inet filter forward $handle; then
+	echo "FAIL: Could not delete large-packet accept rule"
+	exit 1
+fi
+
+ip netns exec ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
+ip netns exec ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
+
+if test_tcp_forwarding_nat ns1 ns2; then
+	echo "PASS: flow offloaded for ns1/ns2 with NAT and pmtu discovery"
+else
+	echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2
+	ip netns exec nsr1 nft list ruleset
+fi
+
+KEY_SHA="0x"$(ps -xaf | sha1sum | cut -d " " -f 1)
+KEY_AES="0x"$(ps -xaf | md5sum | cut -d " " -f 1)
+SPI1=$RANDOM
+SPI2=$RANDOM
+
+if [ $SPI1 -eq $SPI2 ]; then
+	SPI2=$((SPI2+1))
+fi
+
+do_esp() {
+    local ns=$1
+    local me=$2
+    local remote=$3
+    local lnet=$4
+    local rnet=$5
+    local spi_out=$6
+    local spi_in=$7
+
+    ip -net $ns xfrm state add src $remote dst $me proto esp spi $spi_in  enc aes $KEY_AES  auth sha1 $KEY_SHA mode tunnel sel src $rnet dst $lnet
+    ip -net $ns xfrm state add src $me  dst $remote proto esp spi $spi_out enc aes $KEY_AES auth sha1 $KEY_SHA mode tunnel sel src $lnet dst $rnet
+
+    # to encrypt packets as they go out (includes forwarded packets that need encapsulation)
+    ip -net $ns xfrm policy add src $lnet dst $rnet dir out tmpl src $me dst $remote proto esp mode tunnel priority 1 action allow
+    # to fwd decrypted packets after esp processing:
+    ip -net $ns xfrm policy add src $rnet dst $lnet dir fwd tmpl src $remote dst $me proto esp mode tunnel priority 1 action allow
+
+}
+
+do_esp nsr1 192.168.10.1 192.168.10.2 10.0.1.0/24 10.0.2.0/24 $SPI1 $SPI2
+
+do_esp nsr2 192.168.10.2 192.168.10.1 10.0.2.0/24 10.0.1.0/24 $SPI2 $SPI1
+
+ip netns exec nsr1 nft delete table ip nat
+
+# restore default routes
+ip -net ns2 route del 192.168.10.1 via 10.0.2.1
+ip -net ns2 route add default via 10.0.2.1
+ip -net ns2 route add default via dead:2::1
+
+if test_tcp_forwarding ns1 ns2; then
+	echo "PASS: ipsec tunnel mode for ns1/ns2"
+else
+	echo "FAIL: ipsec tunnel mode for ns1/ns2"
+	ip netns exec nsr1 nft list ruleset 1>&2
+	ip netns exec nsr1 cat /proc/net/xfrm_stat 1>&2
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_meta.sh b/tools/testing/selftests/netfilter/nft_meta.sh
new file mode 100755
index 000000000..f33154c04
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_meta.sh
@@ -0,0 +1,142 @@
+#!/bin/bash
+
+# check iif/iifname/oifgroup/iiftype match.
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+
+if ! nft --version > /dev/null 2>&1; then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+cleanup()
+{
+	ip netns del "$ns0"
+}
+
+ip netns add "$ns0"
+ip -net "$ns0" link set lo up
+ip -net "$ns0" addr add 127.0.0.1 dev lo
+
+trap cleanup EXIT
+
+currentyear=$(date +%Y)
+lastyear=$((currentyear-1))
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table inet filter {
+	counter iifcount {}
+	counter iifnamecount {}
+	counter iifgroupcount {}
+	counter iiftypecount {}
+	counter infproto4count {}
+	counter il4protocounter {}
+	counter imarkcounter {}
+	counter icpu0counter {}
+	counter ilastyearcounter {}
+	counter icurrentyearcounter {}
+
+	counter oifcount {}
+	counter oifnamecount {}
+	counter oifgroupcount {}
+	counter oiftypecount {}
+	counter onfproto4count {}
+	counter ol4protocounter {}
+	counter oskuidcounter {}
+	counter oskgidcounter {}
+	counter omarkcounter {}
+
+	chain input {
+		type filter hook input priority 0; policy accept;
+
+		meta iif lo counter name "iifcount"
+		meta iifname "lo" counter name "iifnamecount"
+		meta iifgroup "default" counter name "iifgroupcount"
+		meta iiftype "loopback" counter name "iiftypecount"
+		meta nfproto ipv4 counter name "infproto4count"
+		meta l4proto icmp counter name "il4protocounter"
+		meta mark 42 counter name "imarkcounter"
+		meta cpu 0 counter name "icpu0counter"
+		meta time "$lastyear-01-01" - "$lastyear-12-31" counter name ilastyearcounter
+		meta time "$currentyear-01-01" - "$currentyear-12-31" counter name icurrentyearcounter
+	}
+
+	chain output {
+		type filter hook output priority 0; policy accept;
+		meta oif lo counter name "oifcount" counter
+		meta oifname "lo" counter name "oifnamecount"
+		meta oifgroup "default" counter name "oifgroupcount"
+		meta oiftype "loopback" counter name "oiftypecount"
+		meta nfproto ipv4 counter name "onfproto4count"
+		meta l4proto icmp counter name "ol4protocounter"
+		meta skuid 0 counter name "oskuidcounter"
+		meta skgid 0 counter name "oskgidcounter"
+		meta mark 42 counter name "omarkcounter"
+	}
+}
+EOF
+
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not add test ruleset"
+	exit $ksft_skip
+fi
+
+ret=0
+
+check_one_counter()
+{
+	local cname="$1"
+	local want="packets $2"
+	local verbose="$3"
+
+	if ! ip netns exec "$ns0" nft list counter inet filter $cname | grep -q "$want"; then
+		echo "FAIL: $cname, want \"$want\", got"
+		ret=1
+		ip netns exec "$ns0" nft list counter inet filter $cname
+	fi
+}
+
+check_lo_counters()
+{
+	local want="$1"
+	local verbose="$2"
+	local counter
+
+	for counter in iifcount iifnamecount iifgroupcount iiftypecount infproto4count \
+		       oifcount oifnamecount oifgroupcount oiftypecount onfproto4count \
+		       il4protocounter icurrentyearcounter ol4protocounter \
+	     ; do
+		check_one_counter "$counter" "$want" "$verbose"
+	done
+}
+
+check_lo_counters "0" false
+ip netns exec "$ns0" ping -q -c 1 127.0.0.1 -m 42 > /dev/null
+
+check_lo_counters "2" true
+
+check_one_counter oskuidcounter "1" true
+check_one_counter oskgidcounter "1" true
+check_one_counter imarkcounter "1" true
+check_one_counter omarkcounter "1" true
+check_one_counter ilastyearcounter "0" true
+
+if [ $ret -eq 0 ];then
+	echo "OK: nftables meta iif/oif counters at expected values"
+else
+	exit $ret
+fi
+
+#First CPU execution and counter
+taskset -p 01 $$ > /dev/null
+ip netns exec "$ns0" nft reset counters > /dev/null
+ip netns exec "$ns0" ping -q -c 1 127.0.0.1 > /dev/null
+check_one_counter icpu0counter "2" true
+
+if [ $ret -eq 0 ];then
+	echo "OK: nftables meta cpu counter at expected values"
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
new file mode 100755
index 000000000..67697d8ea
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -0,0 +1,914 @@
+#!/bin/bash
+#
+# This test is for basic NAT functionality: snat, dnat, redirect, masquerade.
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+test_inet_nat=true
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns0="ns0-$sfx"
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+
+cleanup()
+{
+	for i in 0 1 2; do ip netns del ns$i-"$sfx";done
+}
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip netns add "$ns0"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns0"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+ip netns add "$ns1"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns1"
+	exit $ksft_skip
+fi
+
+ip netns add "$ns2"
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace $ns2"
+	exit $ksft_skip
+fi
+
+ip link add veth0 netns "$ns0" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1
+if [ $? -ne 0 ];then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
+ip link add veth1 netns "$ns0" type veth peer name eth0 netns "$ns2"
+
+ip -net "$ns0" link set lo up
+ip -net "$ns0" link set veth0 up
+ip -net "$ns0" addr add 10.0.1.1/24 dev veth0
+ip -net "$ns0" addr add dead:1::1/64 dev veth0
+
+ip -net "$ns0" link set veth1 up
+ip -net "$ns0" addr add 10.0.2.1/24 dev veth1
+ip -net "$ns0" addr add dead:2::1/64 dev veth1
+
+for i in 1 2; do
+  ip -net ns$i-$sfx link set lo up
+  ip -net ns$i-$sfx link set eth0 up
+  ip -net ns$i-$sfx addr add 10.0.$i.99/24 dev eth0
+  ip -net ns$i-$sfx route add default via 10.0.$i.1
+  ip -net ns$i-$sfx addr add dead:$i::99/64 dev eth0
+  ip -net ns$i-$sfx route add default via dead:$i::1
+done
+
+bad_counter()
+{
+	local ns=$1
+	local counter=$2
+	local expect=$3
+	local tag=$4
+
+	echo "ERROR: $counter counter in $ns has unexpected value (expected $expect) at $tag" 1>&2
+	ip netns exec $ns nft list counter inet filter $counter 1>&2
+}
+
+check_counters()
+{
+	ns=$1
+	local lret=0
+
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0in | grep -q "packets 1 bytes 84")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0in "packets 1 bytes 84" "check_counters 1"
+		lret=1
+	fi
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0out | grep -q "packets 1 bytes 84")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0out "packets 1 bytes 84" "check_counters 2"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0in6 | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0in6 "$expect" "check_counters 3"
+		lret=1
+	fi
+	cnt=$(ip netns exec $ns nft list counter inet filter ns0out6 | grep -q "$expect")
+	if [ $? -ne 0 ]; then
+		bad_counter $ns ns0out6 "$expect" "check_counters 4"
+		lret=1
+	fi
+
+	return $lret
+}
+
+check_ns0_counters()
+{
+	local ns=$1
+	local lret=0
+
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter "$ns0" ns0in "packets 0 bytes 0" "check_ns0_counters 1"
+		lret=1
+	fi
+
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0in6 | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter "$ns0" ns0in6 "packets 0 bytes 0"
+		lret=1
+	fi
+
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter "$ns0" ns0out "packets 0 bytes 0" "check_ns0_counters 2"
+		lret=1
+	fi
+	cnt=$(ip netns exec "$ns0" nft list counter inet filter ns0out6 | grep -q "packets 0 bytes 0")
+	if [ $? -ne 0 ]; then
+		bad_counter "$ns0" ns0out6 "packets 0 bytes 0" "check_ns0_counters3 "
+		lret=1
+	fi
+
+	for dir in "in" "out" ; do
+		expect="packets 1 bytes 84"
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" $ns$dir "$expect" "check_ns0_counters 4"
+			lret=1
+		fi
+
+		expect="packets 1 bytes 104"
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ${ns}${dir}6 | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" $ns$dir6 "$expect" "check_ns0_counters 5"
+			lret=1
+		fi
+	done
+
+	return $lret
+}
+
+reset_counters()
+{
+	for i in 0 1 2;do
+		ip netns exec ns$i-$sfx nft reset counters inet > /dev/null
+	done
+}
+
+test_local_dnat6()
+{
+	local family=$1
+	local lret=0
+	local IPF=""
+
+	if [ $family = "inet" ];then
+		IPF="ip6"
+	fi
+
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table $family nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		ip6 daddr dead:1::99 dnat $IPF to dead:2::99
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add add $family dnat hook"
+		return $ksft_skip
+	fi
+
+	# ping netns1, expect rewrite to netns2
+	ip netns exec "$ns0" ping -q -c 1 dead:1::99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping6 failed"
+		return $lret
+	fi
+
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat6 1"
+			lret=1
+		fi
+	done
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat6 2"
+			lret=1
+		fi
+	done
+
+	# expect 0 count in ns1
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat6 3"
+			lret=1
+		fi
+	done
+
+	# expect 1 packet in ns2
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat6 4"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ipv6 ping to $ns1 was $family NATted to $ns2"
+	ip netns exec "$ns0" nft flush chain ip6 nat output
+
+	return $lret
+}
+
+test_local_dnat()
+{
+	local family=$1
+	local lret=0
+	local IPF=""
+
+	if [ $family = "inet" ];then
+		IPF="ip"
+	fi
+
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF 2>/dev/null
+table $family nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		ip daddr 10.0.1.99 dnat $IPF to 10.0.2.99
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		if [ $family = "inet" ];then
+			echo "SKIP: inet nat tests"
+			test_inet_nat=false
+			return $ksft_skip
+		fi
+		echo "SKIP: Could not add add $family dnat hook"
+		return $ksft_skip
+	fi
+
+	# ping netns1, expect rewrite to netns2
+	ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping failed"
+		return $lret
+	fi
+
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns1$dir "$expect" "test_local_dnat 1"
+			lret=1
+		fi
+	done
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 2"
+			lret=1
+		fi
+	done
+
+	# expect 0 count in ns1
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_local_dnat 3"
+			lret=1
+		fi
+	done
+
+	# expect 1 packet in ns2
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 4"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ping to $ns1 was $family NATted to $ns2"
+
+	ip netns exec "$ns0" nft flush chain $family nat output
+
+	reset_counters
+	ip netns exec "$ns0" ping -q -c 1 10.0.1.99 > /dev/null
+	if [ $? -ne 0 ]; then
+		lret=1
+		echo "ERROR: ping failed"
+		return $lret
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns1$dir "$expect" "test_local_dnat 5"
+			lret=1
+		fi
+	done
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns2$dir "$expect" "test_local_dnat 6"
+			lret=1
+		fi
+	done
+
+	# expect 1 count in ns1
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns0$dir "$expect" "test_local_dnat 7"
+			lret=1
+		fi
+	done
+
+	# expect 0 packet in ns2
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns0$dir "$expect" "test_local_dnat 8"
+			lret=1
+		fi
+	done
+
+	test $lret -eq 0 && echo "PASS: ping to $ns1 OK after $family nat output chain flush"
+
+	return $lret
+}
+
+test_local_dnat_portonly()
+{
+	local family=$1
+	local daddr=$2
+	local lret=0
+	local sr_s
+	local sr_r
+
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table $family nat {
+	chain output {
+		type nat hook output priority 0; policy accept;
+		meta l4proto tcp dnat to :2000
+
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		if [ $family = "inet" ];then
+			echo "SKIP: inet port test"
+			test_inet_nat=false
+			return
+		fi
+		echo "SKIP: Could not add $family dnat hook"
+		return
+	fi
+
+	echo SERVER-$family | ip netns exec "$ns1" timeout 5 socat -u STDIN TCP-LISTEN:2000 &
+	sc_s=$!
+
+	sleep 1
+
+	result=$(ip netns exec "$ns0" timeout 1 socat TCP:$daddr:2000 STDOUT)
+
+	if [ "$result" = "SERVER-inet" ];then
+		echo "PASS: inet port rewrite without l3 address"
+	else
+		echo "ERROR: inet port rewrite"
+		ret=1
+	fi
+}
+
+test_masquerade6()
+{
+	local family=$1
+	local natflags=$2
+	local lret=0
+
+	ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 via ipv6"
+		return 1
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns2$dir "$expect" "test_masquerade6 1"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 2"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add masquerading rule
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table $family nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		meta oif veth0 masquerade $natflags
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add add $family masquerade hook"
+		return $ksft_skip
+	fi
+
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from ns0, due to masquerade
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 3"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade6 4"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade6 5"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns1$dir "$expect" "test_masquerade6 6"
+			lret=1
+		fi
+	done
+
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 with active ipv6 masquerade $natflags (attempt 2)"
+		lret=1
+	fi
+
+	ip netns exec "$ns0" nft flush chain $family nat postrouting
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not flush $family nat postrouting" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: $family IPv6 masquerade $natflags for $ns2"
+
+	return $lret
+}
+
+test_masquerade()
+{
+	local family=$1
+	local natflags=$2
+	local lret=0
+
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from "$ns2" $natflags"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns2$dir "$expect" "test_masquerade 1"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 2"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add masquerading rule
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table $family nat {
+	chain postrouting {
+		type nat hook postrouting priority 0; policy accept;
+		meta oif veth0 masquerade $natflags
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add add $family masquerade hook"
+		return $ksft_skip
+	fi
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family masquerade $natflags"
+		lret=1
+	fi
+
+	# ns1 should have seen packets from ns0, due to masquerade
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 3"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns1$dir "$expect" "test_masquerade 4"
+			lret=1
+		fi
+	done
+
+	# ns1 should not have seen packets from ns2, due to masquerade
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_masquerade 5"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns1$dir "$expect" "test_masquerade 6"
+			lret=1
+		fi
+	done
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 with active ip masquerade $natflags (attempt 2)"
+		lret=1
+	fi
+
+	ip netns exec "$ns0" nft flush chain $family nat postrouting
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not flush $family nat postrouting" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: $family IP masquerade $natflags for $ns2"
+
+	return $lret
+}
+
+test_redirect6()
+{
+	local family=$1
+	local lret=0
+
+	ip netns exec "$ns0" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannnot ping $ns1 from $ns2 via ipv6"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns2$dir "$expect" "test_redirect6 1"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns1$dir "$expect" "test_redirect6 2"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add redirect rule
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table $family nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		meta iif veth1 meta l4proto icmpv6 ip6 saddr dead:2::99 ip6 daddr dead:1::99 redirect
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add add $family redirect hook"
+		return $ksft_skip
+	fi
+
+	ip netns exec "$ns2" ping -q -c 1 dead:1::99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 via ipv6 with active $family redirect"
+		lret=1
+	fi
+
+	# ns1 should have seen no packets from ns2, due to redirection
+	expect="packets 0 bytes 0"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 3"
+			lret=1
+		fi
+	done
+
+	# ns0 should have seen packets from ns2, due to masquerade
+	expect="packets 1 bytes 104"
+	for dir in "in6" "out6" ; do
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect6 4"
+			lret=1
+		fi
+	done
+
+	ip netns exec "$ns0" nft delete table $family nat
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete $family nat table" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: $family IPv6 redirection for $ns2"
+
+	return $lret
+}
+
+test_redirect()
+{
+	local family=$1
+	local lret=0
+
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+	ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2"
+		lret=1
+	fi
+
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" $ns2$dir "$expect" "test_redirect 1"
+			lret=1
+		fi
+
+		cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns2" ns1$dir "$expect" "test_redirect 2"
+			lret=1
+		fi
+	done
+
+	reset_counters
+
+# add redirect rule
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+table $family nat {
+	chain prerouting {
+		type nat hook prerouting priority 0; policy accept;
+		meta iif veth1 ip protocol icmp ip saddr 10.0.2.99 ip daddr 10.0.1.99 redirect
+	}
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add add $family redirect hook"
+		return $ksft_skip
+	fi
+
+	ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1
+	if [ $? -ne 0 ] ; then
+		echo "ERROR: cannot ping $ns1 from $ns2 with active $family ip redirect"
+		lret=1
+	fi
+
+	# ns1 should have seen no packets from ns2, due to redirection
+	expect="packets 0 bytes 0"
+	for dir in "in" "out" ; do
+
+		cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns1" ns0$dir "$expect" "test_redirect 3"
+			lret=1
+		fi
+	done
+
+	# ns0 should have seen packets from ns2, due to masquerade
+	expect="packets 1 bytes 84"
+	for dir in "in" "out" ; do
+		cnt=$(ip netns exec "$ns0" nft list counter inet filter ns2${dir} | grep -q "$expect")
+		if [ $? -ne 0 ]; then
+			bad_counter "$ns0" ns0$dir "$expect" "test_redirect 4"
+			lret=1
+		fi
+	done
+
+	ip netns exec "$ns0" nft delete table $family nat
+	if [ $? -ne 0 ]; then
+		echo "ERROR: Could not delete $family nat table" 1>&2
+		lret=1
+	fi
+
+	test $lret -eq 0 && echo "PASS: $family IP redirection for $ns2"
+
+	return $lret
+}
+
+
+# ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
+for i in 0 1 2; do
+ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF
+table inet filter {
+	counter ns0in {}
+	counter ns1in {}
+	counter ns2in {}
+
+	counter ns0out {}
+	counter ns1out {}
+	counter ns2out {}
+
+	counter ns0in6 {}
+	counter ns1in6 {}
+	counter ns2in6 {}
+
+	counter ns0out6 {}
+	counter ns1out6 {}
+	counter ns2out6 {}
+
+	map nsincounter {
+		type ipv4_addr : counter
+		elements = { 10.0.1.1 : "ns0in",
+			     10.0.2.1 : "ns0in",
+			     10.0.1.99 : "ns1in",
+			     10.0.2.99 : "ns2in" }
+	}
+
+	map nsincounter6 {
+		type ipv6_addr : counter
+		elements = { dead:1::1 : "ns0in6",
+			     dead:2::1 : "ns0in6",
+			     dead:1::99 : "ns1in6",
+			     dead:2::99 : "ns2in6" }
+	}
+
+	map nsoutcounter {
+		type ipv4_addr : counter
+		elements = { 10.0.1.1 : "ns0out",
+			     10.0.2.1 : "ns0out",
+			     10.0.1.99: "ns1out",
+			     10.0.2.99: "ns2out" }
+	}
+
+	map nsoutcounter6 {
+		type ipv6_addr : counter
+		elements = { dead:1::1 : "ns0out6",
+			     dead:2::1 : "ns0out6",
+			     dead:1::99 : "ns1out6",
+			     dead:2::99 : "ns2out6" }
+	}
+
+	chain input {
+		type filter hook input priority 0; policy accept;
+		counter name ip saddr map @nsincounter
+		icmpv6 type { "echo-request", "echo-reply" } counter name ip6 saddr map @nsincounter6
+	}
+	chain output {
+		type filter hook output priority 0; policy accept;
+		counter name ip daddr map @nsoutcounter
+		icmpv6 type { "echo-request", "echo-reply" } counter name ip6 daddr map @nsoutcounter6
+	}
+}
+EOF
+done
+
+sleep 3
+# test basic connectivity
+for i in 1 2; do
+  ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 > /dev/null
+  if [ $? -ne 0 ];then
+  	echo "ERROR: Could not reach other namespace(s)" 1>&2
+	ret=1
+  fi
+
+  ip netns exec "$ns0" ping -c 1 -q dead:$i::99 > /dev/null
+  if [ $? -ne 0 ];then
+	echo "ERROR: Could not reach other namespace(s) via ipv6" 1>&2
+	ret=1
+  fi
+  check_counters ns$i-$sfx
+  if [ $? -ne 0 ]; then
+	ret=1
+  fi
+
+  check_ns0_counters ns$i
+  if [ $? -ne 0 ]; then
+	ret=1
+  fi
+  reset_counters
+done
+
+if [ $ret -eq 0 ];then
+	echo "PASS: netns routing/connectivity: $ns0 can reach $ns1 and $ns2"
+fi
+
+reset_counters
+test_local_dnat ip
+test_local_dnat6 ip6
+
+reset_counters
+test_local_dnat_portonly inet 10.0.1.99
+
+reset_counters
+$test_inet_nat && test_local_dnat inet
+$test_inet_nat && test_local_dnat6 inet
+
+for flags in "" "fully-random"; do
+reset_counters
+test_masquerade ip $flags
+test_masquerade6 ip6 $flags
+reset_counters
+$test_inet_nat && test_masquerade inet $flags
+$test_inet_nat && test_masquerade6 inet $flags
+done
+
+reset_counters
+test_redirect ip
+test_redirect6 ip6
+reset_counters
+$test_inet_nat && test_redirect inet
+$test_inet_nat && test_redirect6 inet
+
+if [ $ret -ne 0 ];then
+	echo -n "FAIL: "
+	nft --version
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_queue.sh b/tools/testing/selftests/netfilter/nft_queue.sh
new file mode 100755
index 000000000..3d202b90b
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_queue.sh
@@ -0,0 +1,376 @@
+#!/bin/bash
+#
+# This tests nf_queue:
+# 1. can process packets from all hooks
+# 2. support running nfqueue from more than one base chain
+#
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+
+sfx=$(mktemp -u "XXXXXXXX")
+ns1="ns1-$sfx"
+ns2="ns2-$sfx"
+nsrouter="nsrouter-$sfx"
+timeout=4
+
+cleanup()
+{
+	ip netns del ${ns1}
+	ip netns del ${ns2}
+	ip netns del ${nsrouter}
+	rm -f "$TMPFILE0"
+	rm -f "$TMPFILE1"
+	rm -f "$TMPFILE2" "$TMPFILE3"
+}
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip netns add ${nsrouter}
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not create net namespace"
+	exit $ksft_skip
+fi
+
+TMPFILE0=$(mktemp)
+TMPFILE1=$(mktemp)
+TMPFILE2=$(mktemp)
+TMPFILE3=$(mktemp)
+trap cleanup EXIT
+
+ip netns add ${ns1}
+ip netns add ${ns2}
+
+ip link add veth0 netns ${nsrouter} type veth peer name eth0 netns ${ns1} > /dev/null 2>&1
+if [ $? -ne 0 ];then
+    echo "SKIP: No virtual ethernet pair device support in kernel"
+    exit $ksft_skip
+fi
+ip link add veth1 netns ${nsrouter} type veth peer name eth0 netns ${ns2}
+
+ip -net ${nsrouter} link set lo up
+ip -net ${nsrouter} link set veth0 up
+ip -net ${nsrouter} addr add 10.0.1.1/24 dev veth0
+ip -net ${nsrouter} addr add dead:1::1/64 dev veth0
+
+ip -net ${nsrouter} link set veth1 up
+ip -net ${nsrouter} addr add 10.0.2.1/24 dev veth1
+ip -net ${nsrouter} addr add dead:2::1/64 dev veth1
+
+ip -net ${ns1} link set lo up
+ip -net ${ns1} link set eth0 up
+
+ip -net ${ns2} link set lo up
+ip -net ${ns2} link set eth0 up
+
+ip -net ${ns1} addr add 10.0.1.99/24 dev eth0
+ip -net ${ns1} addr add dead:1::99/64 dev eth0
+ip -net ${ns1} route add default via 10.0.1.1
+ip -net ${ns1} route add default via dead:1::1
+
+ip -net ${ns2} addr add 10.0.2.99/24 dev eth0
+ip -net ${ns2} addr add dead:2::99/64 dev eth0
+ip -net ${ns2} route add default via 10.0.2.1
+ip -net ${ns2} route add default via dead:2::1
+
+load_ruleset() {
+	local name=$1
+	local prio=$2
+
+ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
+table inet $name {
+	chain nfq {
+		ip protocol icmp queue bypass
+		icmpv6 type { "echo-request", "echo-reply" } queue num 1 bypass
+	}
+	chain pre {
+		type filter hook prerouting priority $prio; policy accept;
+		jump nfq
+	}
+	chain input {
+		type filter hook input priority $prio; policy accept;
+		jump nfq
+	}
+	chain forward {
+		type filter hook forward priority $prio; policy accept;
+		tcp dport 12345 queue num 2
+		jump nfq
+	}
+	chain output {
+		type filter hook output priority $prio; policy accept;
+		tcp dport 12345 queue num 3
+		jump nfq
+	}
+	chain post {
+		type filter hook postrouting priority $prio; policy accept;
+		jump nfq
+	}
+}
+EOF
+}
+
+load_counter_ruleset() {
+	local prio=$1
+
+ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
+table inet countrules {
+	chain pre {
+		type filter hook prerouting priority $prio; policy accept;
+		counter
+	}
+	chain input {
+		type filter hook input priority $prio; policy accept;
+		counter
+	}
+	chain forward {
+		type filter hook forward priority $prio; policy accept;
+		counter
+	}
+	chain output {
+		type filter hook output priority $prio; policy accept;
+		counter
+	}
+	chain post {
+		type filter hook postrouting priority $prio; policy accept;
+		counter
+	}
+}
+EOF
+}
+
+test_ping() {
+  ip netns exec ${ns1} ping -c 1 -q 10.0.2.99 > /dev/null
+  if [ $? -ne 0 ];then
+	return 1
+  fi
+
+  ip netns exec ${ns1} ping -c 1 -q dead:2::99 > /dev/null
+  if [ $? -ne 0 ];then
+	return 1
+  fi
+
+  return 0
+}
+
+test_ping_router() {
+  ip netns exec ${ns1} ping -c 1 -q 10.0.2.1 > /dev/null
+  if [ $? -ne 0 ];then
+	return 1
+  fi
+
+  ip netns exec ${ns1} ping -c 1 -q dead:2::1 > /dev/null
+  if [ $? -ne 0 ];then
+	return 1
+  fi
+
+  return 0
+}
+
+test_queue_blackhole() {
+	local proto=$1
+
+ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
+table $proto blackh {
+	chain forward {
+	type filter hook forward priority 0; policy accept;
+		queue num 600
+	}
+}
+EOF
+	if [ $proto = "ip" ] ;then
+		ip netns exec ${ns1} ping -W 2 -c 1 -q 10.0.2.99 > /dev/null
+		lret=$?
+	elif [ $proto = "ip6" ]; then
+		ip netns exec ${ns1} ping -W 2 -c 1 -q dead:2::99 > /dev/null
+		lret=$?
+	else
+		lret=111
+	fi
+
+	# queue without bypass keyword should drop traffic if no listener exists.
+	if [ $lret -eq 0 ];then
+		echo "FAIL: $proto expected failure, got $lret" 1>&2
+		exit 1
+	fi
+
+	ip netns exec ${nsrouter} nft delete table $proto blackh
+	if [ $? -ne 0 ] ;then
+	        echo "FAIL: $proto: Could not delete blackh table"
+	        exit 1
+	fi
+
+        echo "PASS: $proto: statement with no listener results in packet drop"
+}
+
+test_queue()
+{
+	local expected=$1
+	local last=""
+
+	# spawn nf-queue listeners
+	ip netns exec ${nsrouter} ./nf-queue -c -q 0 -t $timeout > "$TMPFILE0" &
+	ip netns exec ${nsrouter} ./nf-queue -c -q 1 -t $timeout > "$TMPFILE1" &
+	sleep 1
+	test_ping
+	ret=$?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: netns routing/connectivity with active listener on queue $queue: $ret" 1>&2
+		exit $ret
+	fi
+
+	test_ping_router
+	ret=$?
+	if [ $ret -ne 0 ];then
+		echo "FAIL: netns router unreachable listener on queue $queue: $ret" 1>&2
+		exit $ret
+	fi
+
+	wait
+	ret=$?
+
+	for file in $TMPFILE0 $TMPFILE1; do
+		last=$(tail -n1 "$file")
+		if [ x"$last" != x"$expected packets total" ]; then
+			echo "FAIL: Expected $expected packets total, but got $last" 1>&2
+			cat "$file" 1>&2
+
+			ip netns exec ${nsrouter} nft list ruleset
+			exit 1
+		fi
+	done
+
+	echo "PASS: Expected and received $last"
+}
+
+test_tcp_forward()
+{
+	ip netns exec ${nsrouter} ./nf-queue -q 2 -t $timeout &
+	local nfqpid=$!
+
+	tmpfile=$(mktemp) || exit 1
+	dd conv=sparse status=none if=/dev/zero bs=1M count=200 of=$tmpfile
+	ip netns exec ${ns2} nc -w 5 -l -p 12345 <"$tmpfile" >/dev/null &
+	local rpid=$!
+
+	sleep 1
+	ip netns exec ${ns1} nc -w 5 10.0.2.99 12345 <"$tmpfile" >/dev/null &
+
+	rm -f "$tmpfile"
+
+	wait $rpid
+	wait $lpid
+	[ $? -eq 0 ] && echo "PASS: tcp and nfqueue in forward chain"
+}
+
+test_tcp_localhost()
+{
+	tmpfile=$(mktemp) || exit 1
+
+	dd conv=sparse status=none if=/dev/zero bs=1M count=200 of=$tmpfile
+	ip netns exec ${nsrouter} nc -w 5 -l -p 12345 <"$tmpfile" >/dev/null &
+	local rpid=$!
+
+	ip netns exec ${nsrouter} ./nf-queue -q 3 -t $timeout &
+	local nfqpid=$!
+
+	sleep 1
+	ip netns exec ${nsrouter} nc -w 5 127.0.0.1 12345 <"$tmpfile" > /dev/null
+	rm -f "$tmpfile"
+
+	wait $rpid
+	[ $? -eq 0 ] && echo "PASS: tcp via loopback"
+	wait 2>/dev/null
+}
+
+test_tcp_localhost_requeue()
+{
+ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
+flush ruleset
+table inet filter {
+	chain output {
+		type filter hook output priority 0; policy accept;
+		tcp dport 12345 limit rate 1/second burst 1 packets counter queue num 0
+	}
+	chain post {
+		type filter hook postrouting priority 0; policy accept;
+		tcp dport 12345 limit rate 1/second burst 1 packets counter queue num 0
+	}
+}
+EOF
+	tmpfile=$(mktemp) || exit 1
+	dd conv=sparse status=none if=/dev/zero bs=1M count=200 of=$tmpfile
+	ip netns exec ${nsrouter} nc -w 5 -l -p 12345 <"$tmpfile" >/dev/null &
+	local rpid=$!
+
+	ip netns exec ${nsrouter} ./nf-queue -c -q 1 -t $timeout > "$TMPFILE2" &
+
+	# nfqueue 1 will be called via output hook.  But this time,
+        # re-queue the packet to nfqueue program on queue 2.
+	ip netns exec ${nsrouter} ./nf-queue -G -d 150 -c -q 0 -Q 1 -t $timeout > "$TMPFILE3" &
+
+	sleep 1
+	ip netns exec ${nsrouter} nc -w 5 127.0.0.1 12345 <"$tmpfile" > /dev/null
+	rm -f "$tmpfile"
+
+	wait
+
+	if ! diff -u "$TMPFILE2" "$TMPFILE3" ; then
+		echo "FAIL: lost packets during requeue?!" 1>&2
+		return
+	fi
+
+	echo "PASS: tcp via loopback and re-queueing"
+}
+
+ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+
+load_ruleset "filter" 0
+
+sleep 3
+
+test_ping
+ret=$?
+if [ $ret -eq 0 ];then
+	# queue bypass works (rules were skipped, no listener)
+	echo "PASS: ${ns1} can reach ${ns2}"
+else
+	echo "FAIL: ${ns1} cannot reach ${ns2}: $ret" 1>&2
+	exit $ret
+fi
+
+test_queue_blackhole ip
+test_queue_blackhole ip6
+
+# dummy ruleset to add base chains between the
+# queueing rules.  We don't want the second reinject
+# to re-execute the old hooks.
+load_counter_ruleset 10
+
+# we are hooking all: prerouting/input/forward/output/postrouting.
+# we ping ${ns2} from ${ns1} via ${nsrouter} using ipv4 and ipv6, so:
+# 1x icmp prerouting,forward,postrouting -> 3 queue events (6 incl. reply).
+# 1x icmp prerouting,input,output postrouting -> 4 queue events incl. reply.
+# so we expect that userspace program receives 10 packets.
+test_queue 10
+
+# same.  We queue to a second program as well.
+load_ruleset "filter2" 20
+test_queue 20
+
+test_tcp_forward
+test_tcp_localhost
+test_tcp_localhost_requeue
+
+exit $ret
diff --git a/tools/testing/selftests/netfilter/nft_trans_stress.sh b/tools/testing/selftests/netfilter/nft_trans_stress.sh
new file mode 100755
index 000000000..f1affd12c
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_trans_stress.sh
@@ -0,0 +1,78 @@
+#!/bin/bash
+#
+# This test is for stress-testing the nf_tables config plane path vs.
+# packet path processing: Make sure we never release rules that are
+# still visible to other cpus.
+#
+# set -e
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+testns=testns1
+tables="foo bar baz quux"
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without nft tool"
+	exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+tmp=$(mktemp)
+
+for table in $tables; do
+	echo add table inet "$table" >> "$tmp"
+	echo flush table inet "$table" >> "$tmp"
+
+	echo "add chain inet $table INPUT { type filter hook input priority 0; }" >> "$tmp"
+	echo "add chain inet $table OUTPUT { type filter hook output priority 0; }" >> "$tmp"
+	for c in $(seq 1 400); do
+		chain=$(printf "chain%03u" "$c")
+		echo "add chain inet $table $chain" >> "$tmp"
+	done
+
+	for c in $(seq 1 400); do
+		chain=$(printf "chain%03u" "$c")
+		for BASE in INPUT OUTPUT; do
+			echo "add rule inet $table $BASE counter jump $chain" >> "$tmp"
+		done
+		echo "add rule inet $table $chain counter return" >> "$tmp"
+	done
+done
+
+ip netns add "$testns"
+ip -netns "$testns" link set lo up
+
+lscpu | grep ^CPU\(s\): | ( read cpu cpunum ;
+cpunum=$((cpunum-1))
+for i in $(seq 0 $cpunum);do
+	mask=$(printf 0x%x $((1<<$i)))
+        ip netns exec "$testns" taskset $mask ping -4 127.0.0.1 -fq > /dev/null &
+        ip netns exec "$testns" taskset $mask ping -6 ::1 -fq > /dev/null &
+done)
+
+sleep 1
+
+for i in $(seq 1 10) ; do ip netns exec "$testns" nft -f "$tmp" & done
+
+for table in $tables;do
+	randsleep=$((RANDOM%10))
+	sleep $randsleep
+	ip netns exec "$testns" nft delete table inet $table 2>/dev/null
+done
+
+randsleep=$((RANDOM%10))
+sleep $randsleep
+
+pkill -9 ping
+
+wait
+
+rm -f "$tmp"
+ip netns del "$testns"