Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 184 insertions, 0 deletions

diff --git a/tools/testing/selftests/powerpc/eeh/Makefile b/tools/testing/selftests/powerpc/eeh/Makefile
new file mode 100644
index 000000000..b397babd5
--- /dev/null
+++ b/tools/testing/selftests/powerpc/eeh/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+noarg:
+	$(MAKE) -C ../
+
+TEST_PROGS := eeh-basic.sh
+TEST_FILES := eeh-functions.sh
+
+top_srcdir = ../../../../..
+include ../../lib.mk
diff --git a/tools/testing/selftests/powerpc/eeh/eeh-basic.sh b/tools/testing/selftests/powerpc/eeh/eeh-basic.sh
new file mode 100755
index 000000000..64779f073
--- /dev/null
+++ b/tools/testing/selftests/powerpc/eeh/eeh-basic.sh
@@ -0,0 +1,90 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+KSELFTESTS_SKIP=4
+
+. ./eeh-functions.sh
+
+if ! eeh_supported ; then
+	echo "EEH not supported on this system, skipping"
+	exit $KSELFTESTS_SKIP;
+fi
+
+if [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_check" ] && \
+   [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_break" ] ; then
+	echo "debugfs EEH testing files are missing. Is debugfs mounted?"
+	exit $KSELFTESTS_SKIP;
+fi
+
+pre_lspci=`mktemp`
+lspci > $pre_lspci
+
+# Bump the max freeze count to something absurd so we don't
+# trip over it while breaking things.
+echo 5000 > /sys/kernel/debug/powerpc/eeh_max_freezes
+
+# record the devices that we break in here. Assuming everything
+# goes to plan we should get them back once the recover process
+# is finished.
+devices=""
+
+# Build up a list of candidate devices.
+for dev in `ls -1 /sys/bus/pci/devices/ | grep '\.0$'` ; do
+	# skip bridges since we can't recover them (yet...)
+	if [ -e "/sys/bus/pci/devices/$dev/pci_bus" ] ; then
+		echo "$dev, Skipped: bridge"
+		continue;
+	fi
+
+	# Skip VFs for now since we don't have a reliable way
+	# to break them.
+	if [ -e "/sys/bus/pci/devices/$dev/physfn" ] ; then
+		echo "$dev, Skipped: virtfn"
+		continue;
+	fi
+
+	if [ "ahci" = "$(basename $(realpath /sys/bus/pci/devices/$dev/driver))" ] ; then
+		echo "$dev, Skipped: ahci doesn't support recovery"
+		continue
+	fi
+
+	# Don't inject errosr into an already-frozen PE. This happens with
+	# PEs that contain multiple PCI devices (e.g. multi-function cards)
+	# and injecting new errors during the recovery process will probably
+	# result in the recovery failing and the device being marked as
+	# failed.
+	if ! pe_ok $dev ; then
+		echo "$dev, Skipped: Bad initial PE state"
+		continue;
+	fi
+
+	echo "$dev, Added"
+
+	# Add to this list of device to check
+	devices="$devices $dev"
+done
+
+dev_count="$(echo $devices | wc -w)"
+echo "Found ${dev_count} breakable devices..."
+
+failed=0
+for dev in $devices ; do
+	echo "Breaking $dev..."
+
+	if ! pe_ok $dev ; then
+		echo "Skipping $dev, Initial PE state is not ok"
+		failed="$((failed + 1))"
+		continue;
+	fi
+
+	if ! eeh_one_dev $dev ; then
+		failed="$((failed + 1))"
+	fi
+done
+
+echo "$failed devices failed to recover ($dev_count tested)"
+lspci | diff -u $pre_lspci -
+rm -f $pre_lspci
+
+test "$failed" -eq 0
+exit $?
diff --git a/tools/testing/selftests/powerpc/eeh/eeh-functions.sh b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh
new file mode 100755
index 000000000..00dc32c0e
--- /dev/null
+++ b/tools/testing/selftests/powerpc/eeh/eeh-functions.sh
@@ -0,0 +1,85 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+pe_ok() {
+	local dev="$1"
+	local path="/sys/bus/pci/devices/$dev/eeh_pe_state"
+
+	# if a driver doesn't support the error handling callbacks then the
+	# device is recovered by removing and re-probing it. This causes the
+	# sysfs directory to disappear so read the PE state once and squash
+	# any potential error messages
+	local eeh_state="$(cat $path 2>/dev/null)"
+	if [ -z "$eeh_state" ]; then
+		return 1;
+	fi
+
+	local fw_state="$(echo $eeh_state | cut -d' ' -f1)"
+	local sw_state="$(echo $eeh_state | cut -d' ' -f2)"
+
+	# If EEH_PE_ISOLATED or EEH_PE_RECOVERING are set then the PE is in an
+	# error state or being recovered. Either way, not ok.
+	if [ "$((sw_state & 0x3))" -ne 0 ] ; then
+		return 1
+	fi
+
+	# A functioning PE should have the EEH_STATE_MMIO_ACTIVE and
+	# EEH_STATE_DMA_ACTIVE flags set. For some goddamn stupid reason
+	# the platform backends set these when the PE is in reset. The
+	# RECOVERING check above should stop any false positives though.
+	if [ "$((fw_state & 0x18))" -ne "$((0x18))" ] ; then
+		return 1
+	fi
+
+	return 0;
+}
+
+eeh_supported() {
+	test -e /proc/powerpc/eeh && \
+	grep -q 'EEH Subsystem is enabled' /proc/powerpc/eeh
+}
+
+eeh_one_dev() {
+	local dev="$1"
+
+	# Using this function from the command line is sometimes useful for
+	# testing so check that the argument is a well-formed sysfs device
+	# name.
+	if ! test -e /sys/bus/pci/devices/$dev/ ; then
+		echo "Error: '$dev' must be a sysfs device name (DDDD:BB:DD.F)"
+		return 1;
+	fi
+
+	# Break it
+	echo $dev >/sys/kernel/debug/powerpc/eeh_dev_break
+
+	# Force an EEH device check. If the kernel has already
+	# noticed the EEH (due to a driver poll or whatever), this
+	# is a no-op.
+	echo $dev >/sys/kernel/debug/powerpc/eeh_dev_check
+
+	# Default to a 60s timeout when waiting for a device to recover. This
+	# is an arbitrary default which can be overridden by setting the
+	# EEH_MAX_WAIT environmental variable when required.
+
+	# The current record holder for longest recovery time is:
+	#  "Adaptec Series 8 12G SAS/PCIe 3" at 39 seconds
+	max_wait=${EEH_MAX_WAIT:=60}
+
+	for i in `seq 0 ${max_wait}` ; do
+		if pe_ok $dev ; then
+			break;
+		fi
+		echo "$dev, waited $i/${max_wait}"
+		sleep 1
+	done
+
+	if ! pe_ok $dev ; then
+		echo "$dev, Failed to recover!"
+		return 1;
+	fi
+
+	echo "$dev, Recovered after $i seconds"
+	return 0;
+}
+