diff options
Diffstat (limited to '')
23 files changed, 1352 insertions, 0 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-bus-usb b/Documentation/ABI/obsolete/sysfs-bus-usb new file mode 100644 index 000000000..bd096d33f --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-bus-usb @@ -0,0 +1,31 @@ +What: /sys/bus/usb/devices/.../power/level +Date: March 2007 +KernelVersion: 2.6.21 +Contact: Alan Stern <stern@rowland.harvard.edu> +Description: + Each USB device directory will contain a file named + power/level. This file holds a power-level setting for + the device, either "on" or "auto". + + "on" means that the device is not allowed to autosuspend, + although normal suspends for system sleep will still + be honored. "auto" means the device will autosuspend + and autoresume in the usual manner, according to the + capabilities of its driver. + + During normal use, devices should be left in the "auto" + level. The "on" level is meant for administrative uses. + If you want to suspend a device immediately but leave it + free to wake up in response to I/O requests, you should + write "0" to power/autosuspend. + + Device not capable of proper suspend and resume should be + left in the "on" level. Although the USB spec requires + devices to support suspend/resume, many of them do not. + In fact so many don't that by default, the USB core + initializes all non-hub devices in the "on" level. Some + drivers may change this setting when they are bound. + + This file is deprecated and will be removed after 2010. + Use the power/control file instead; it does exactly the + same thing. diff --git a/Documentation/ABI/obsolete/sysfs-class-dax b/Documentation/ABI/obsolete/sysfs-class-dax new file mode 100644 index 000000000..0faf1354c --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-class-dax @@ -0,0 +1,22 @@ +What: /sys/class/dax/ +Date: May, 2016 +KernelVersion: v4.7 +Contact: linux-nvdimm@lists.01.org +Description: Device DAX is the device-centric analogue of Filesystem + DAX (CONFIG_FS_DAX). It allows memory ranges to be + allocated and mapped without need of an intervening file + system. Device DAX is strict, precise and predictable. + Specifically this interface: + + 1. Guarantees fault granularity with respect to a given + page size (pte, pmd, or pud) set at configuration time. + + 2. Enforces deterministic behavior by being strict about + what fault scenarios are supported. + + The /sys/class/dax/ interface enumerates all the + device-dax instances in the system. The ABI is + deprecated and will be removed after 2020. It is + replaced with the DAX bus interface /sys/bus/dax/ where + device-dax instances can be found under + /sys/bus/dax/devices/ diff --git a/Documentation/ABI/obsolete/sysfs-class-net-batman-adv b/Documentation/ABI/obsolete/sysfs-class-net-batman-adv new file mode 100644 index 000000000..5bdbc8d40 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-class-net-batman-adv @@ -0,0 +1,32 @@ +This ABI is deprecated and will be removed after 2021. It is +replaced with the batadv generic netlink family. + +What: /sys/class/net/<iface>/batman-adv/elp_interval +Date: Feb 2014 +Contact: Linus Lüssing <linus.luessing@web.de> +Description: + Defines the interval in milliseconds in which batman + emits probing packets for neighbor sensing (ELP). + +What: /sys/class/net/<iface>/batman-adv/iface_status +Date: May 2010 +Contact: Marek Lindner <mareklindner@neomailbox.ch> +Description: + Indicates the status of <iface> as it is seen by batman. + +What: /sys/class/net/<iface>/batman-adv/mesh_iface +Date: May 2010 +Contact: Marek Lindner <mareklindner@neomailbox.ch> +Description: + The /sys/class/net/<iface>/batman-adv/mesh_iface file + displays the batman mesh interface this <iface> + currently is associated with. + +What: /sys/class/net/<iface>/batman-adv/throughput_override +Date: Feb 2014 +Contact: Antonio Quartulli <a@unstable.cc> +description: + Defines the throughput value to be used by B.A.T.M.A.N. V + when estimating the link throughput using this interface. + If the value is set to 0 then batman-adv will try to + estimate the throughput by itself. diff --git a/Documentation/ABI/obsolete/sysfs-class-net-mesh b/Documentation/ABI/obsolete/sysfs-class-net-mesh new file mode 100644 index 000000000..04c1a2932 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-class-net-mesh @@ -0,0 +1,110 @@ +This ABI is deprecated and will be removed after 2021. It is +replaced with the batadv generic netlink family. + +What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms +Date: May 2010 +Contact: Marek Lindner <mareklindner@neomailbox.ch> +Description: + Indicates whether the batman protocol messages of the + mesh <mesh_iface> shall be aggregated or not. + +What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation +Date: May 2011 +Contact: Antonio Quartulli <a@unstable.cc> +Description: + Indicates whether the data traffic going from a + wireless client to another wireless client will be + silently dropped. <vlan_subdir> is empty when referring + to the untagged lan. + +What: /sys/class/net/<mesh_iface>/mesh/bonding +Date: June 2010 +Contact: Simon Wunderlich <sw@simonwunderlich.de> +Description: + Indicates whether the data traffic going through the + mesh will be sent using multiple interfaces at the + same time (if available). + +What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance +Date: November 2011 +Contact: Simon Wunderlich <sw@simonwunderlich.de> +Description: + Indicates whether the bridge loop avoidance feature + is enabled. This feature detects and avoids loops + between the mesh and devices bridged with the soft + interface <mesh_iface>. + +What: /sys/class/net/<mesh_iface>/mesh/fragmentation +Date: October 2010 +Contact: Andreas Langer <an.langer@gmx.de> +Description: + Indicates whether the data traffic going through the + mesh will be fragmented or silently discarded if the + packet size exceeds the outgoing interface MTU. + +What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth +Date: October 2010 +Contact: Marek Lindner <mareklindner@neomailbox.ch> +Description: + Defines the bandwidth which is propagated by this + node if gw_mode was set to 'server'. + +What: /sys/class/net/<mesh_iface>/mesh/gw_mode +Date: October 2010 +Contact: Marek Lindner <mareklindner@neomailbox.ch> +Description: + Defines the state of the gateway features. Can be + either 'off', 'client' or 'server'. + +What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class +Date: October 2010 +Contact: Marek Lindner <mareklindner@neomailbox.ch> +Description: + Defines the selection criteria this node will use + to choose a gateway if gw_mode was set to 'client'. + +What: /sys/class/net/<mesh_iface>/mesh/hop_penalty +Date: Oct 2010 +Contact: Linus Lüssing <linus.luessing@web.de> +Description: + Defines the penalty which will be applied to an + originator message's tq-field on every hop. + +What: /sys/class/net/<mesh_iface>/mesh/isolation_mark +Date: Nov 2013 +Contact: Antonio Quartulli <a@unstable.cc> +Description: + Defines the isolation mark (and its bitmask) which + is used to classify clients as "isolated" by the + Extended Isolation feature. + +What: /sys/class/net/<mesh_iface>/mesh/multicast_mode +Date: Feb 2014 +Contact: Linus Lüssing <linus.luessing@web.de> +Description: + Indicates whether multicast optimizations are enabled + or disabled. If set to zero then all nodes in the + mesh are going to use classic flooding for any + multicast packet with no optimizations. + +What: /sys/class/net/<mesh_iface>/mesh/network_coding +Date: Nov 2012 +Contact: Martin Hundeboll <martin@hundeboll.net> +Description: + Controls whether Network Coding (using some magic + to send fewer wifi packets but still the same + content) is enabled or not. + +What: /sys/class/net/<mesh_iface>/mesh/orig_interval +Date: May 2010 +Contact: Marek Lindner <mareklindner@neomailbox.ch> +Description: + Defines the interval in milliseconds in which batman + sends its protocol messages. + +What: /sys/class/net/<mesh_iface>/mesh/routing_algo +Date: Dec 2011 +Contact: Marek Lindner <mareklindner@neomailbox.ch> +Description: + Defines the routing procotol this mesh instance + uses to find the optimal paths through the mesh. diff --git a/Documentation/ABI/obsolete/sysfs-class-typec b/Documentation/ABI/obsolete/sysfs-class-typec new file mode 100644 index 000000000..32623514e --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-class-typec @@ -0,0 +1,48 @@ +These files are deprecated and will be removed. The same files are available +under /sys/bus/typec (see Documentation/ABI/testing/sysfs-bus-typec). + +What: /sys/class/typec/<port|partner|cable>/<dev>/svid +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The SVID (Standard or Vendor ID) assigned by USB-IF for this + alternate mode. + +What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/ +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Every supported mode will have its own directory. The name of + a mode will be "mode<index>" (for example mode1), where <index> + is the actual index to the mode VDO returned by Discover Modes + USB power delivery command. + +What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/description +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows description of the mode. The description is optional for + the drivers, just like with the Billboard Devices. + +What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/vdo +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows the VDO in hexadecimal returned by Discover Modes command + for this mode. + +What: /sys/class/typec/<port|partner|cable>/<dev>/mode<index>/active +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows if the mode is active or not. The attribute can be used + for entering/exiting the mode with partners and cable plugs, and + with the port alternate modes it can be used for disabling + support for specific alternate modes. Entering/exiting modes is + supported as synchronous operation so write(2) to the attribute + does not return until the enter/exit mode operation has + finished. The attribute is notified when the mode is + entered/exited so poll(2) on the attribute wakes up. + Entering/exiting a mode will also generate uevent KOBJ_CHANGE. + + Valid values: yes, no diff --git a/Documentation/ABI/obsolete/sysfs-cpuidle b/Documentation/ABI/obsolete/sysfs-cpuidle new file mode 100644 index 000000000..e398fb5e5 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-cpuidle @@ -0,0 +1,9 @@ +What: /sys/devices/system/cpu/cpuidle/current_governor_ro +Date: April, 2020 +Contact: linux-pm@vger.kernel.org +Description: + current_governor_ro shows current using cpuidle governor, but read only. + with the update that cpuidle governor can be changed at runtime in default, + both current_governor and current_governor_ro co-exist under + /sys/devices/system/cpu/cpuidle/ file, it's duplicate so make + current_governor_ro obselete. diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo new file mode 100644 index 000000000..55e281b00 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-arvo @@ -0,0 +1,53 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/actual_profile +Date: Januar 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 1-5. + When read, this attribute returns the number of the actual + profile which is also the profile that's active on device startup. + When written this attribute activates the selected profile + immediately. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/button +Date: Januar 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The keyboard can store short macros with consist of 1 button with + several modifier keys internally. + When written, this file lets one set the sequence for a specific + button for a specific profile. Button and profile numbers are + included in written data. The data has to be 24 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/info +Date: Januar 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns some info about the device like the + installed firmware version. + The size of the data is 8 bytes in size. + This file is readonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/key_mask +Date: Januar 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The keyboard lets the user deactivate 5 certain keys like the + windows and application keys, to protect the user from the outcome + of accidentally pressing them. + The integer value of this attribute has bits 0-4 set depending + on the state of the corresponding key. + When read, this file returns the current state of the buttons. + When written, the given buttons are activated/deactivated + immediately. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/arvo/roccatarvo<minor>/mode_key +Date: Januar 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The keyboard has a condensed layout without num-lock key. + Instead it uses a mode-key which activates a gaming mode where + the assignment of the number block changes. + The integer value of this attribute ranges from 0 (OFF) to 1 (ON). + When read, this file returns the actual state of the key. + When written, the key is activated/deactivated immediately. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku new file mode 100644 index 000000000..c601d0f2a --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-isku @@ -0,0 +1,153 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/actual_profile +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the actual + profile. This value is persistent, so its equivalent to the + profile that's active when the device is powered on next time. + When written, this file sets the number of the startup profile + and the device activates this profile immediately. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/info +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns general data like firmware version. + The data is 6 bytes long. + This file is readonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/key_mask +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one deactivate certain keys like + windows and application keys, to prevent accidental presses. + Profile number for which this settings occur is included in + written data. The data has to be 6 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_capslock +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the + capslock key for a specific profile. Profile number is included + in written data. The data has to be 6 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_easyzone +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the + easyzone keys for a specific profile. Profile number is included + in written data. The data has to be 65 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_function +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the + function keys for a specific profile. Profile number is included + in written data. The data has to be 41 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_macro +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the macro + keys for a specific profile. Profile number is included in + written data. The data has to be 35 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_media +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the media + keys for a specific profile. Profile number is included in + written data. The data has to be 29 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/keys_thumbster +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the + thumbster keys for a specific profile. Profile number is included + in written data. The data has to be 23 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/last_set +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the time in secs since + epoch in which the last configuration took place. + The data has to be 20 bytes long. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/light +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the backlight intensity for + a specific profile. Profile number is included in written data. + The data has to be 10 bytes long for Isku, IskuFX needs 16 bytes + of data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/macro +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one store macros with max 500 + keystrokes for a specific button for a specific profile. + Button and profile numbers are included in written data. + The data has to be 2083 bytes long. + Before reading this file, control has to be written to select + which profile and key to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset +Date: November 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one reset the device. + The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one select which data from which + profile will be read next. The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talk +Date: June 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one trigger easyshift functionality + from the host. + The data has to be 16 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talkfx +Date: February 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one trigger temporary color schemes + from the host. + The data has to be 16 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus new file mode 100644 index 000000000..545e69f43 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus @@ -0,0 +1,145 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the actual + profile. This value is persistent, so its equivalent to the + profile that's active when the mouse is powered on next time. + When written, this file sets the number of the startup profile + and the mouse activates this profile immediately. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/startup_profile +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the actual + profile. This value is persistent, so its equivalent to the + profile that's active when the mouse is powered on next time. + When written, this file sets the number of the startup profile + and the mouse activates this profile immediately. + Please use actual_profile, it does the same thing. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the raw integer version number of the + firmware reported by the mouse. Using the integer value eases + further usage in other programs. To receive the real version + number the decimal point has to be shifted 2 positions to the + left. E.g. a returned value of 121 means 1.21 + This file is readonly. + Please read binary attribute info which contains firmware version. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info +Date: November 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns general data like firmware version. + When written, the device can be reset. + The data is 8 bytes long. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store a macro with max 500 key/button strokes + internally. + When written, this file lets one set the sequence for a specific + button for a specific profile. Button and profile numbers are + included in written data. The data has to be 2082 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When written, this file lets one write the respective profile + buttons back to the mouse. The data has to be 77 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When read, these files return the respective profile buttons. + The returned data is 77 bytes in size. + This file is readonly. + Write control to select profile and read profile_buttons instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When written, this file lets one write the respective profile + settings back to the mouse. The data has to be 43 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When read, these files return the respective profile settings. + The returned data is 43 bytes in size. + This file is readonly. + Write control to select profile and read profile_settings instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse has a tracking- and a distance-control-unit. These + can be activated/deactivated and the lift-off distance can be + set. The data has to be 6 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk +Date: May 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: Used to active some easy* functions of the mouse from outside. + The data has to be 16 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written a calibration process for the tracking control unit + can be initiated/cancelled. Also lets one read/write sensor + registers. + The data has to be 4 bytes long. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image +Date: October 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read the mouse returns a 30x30 pixel image of the + sampled underground. This works only in the course of a + calibration process initiated with tcu. + The returned data is 1028 bytes in size. + This file is readonly. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure new file mode 100644 index 000000000..41a9b7fbf --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-konepure @@ -0,0 +1,105 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. actual_profile holds number of actual profile. + This value is persistent, so its value determines the profile + that's active when the mouse is powered on next time. + When written, the mouse activates the set profile immediately. + The data has to be 3 bytes long. + The mouse will reject invalid data. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one select which data from which + profile will be read next. The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns general data like firmware version. + When written, the device can be reset. + The data is 6 bytes long. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store a macro with max 500 key/button strokes + internally. + When written, this file lets one set the sequence for a specific + button for a specific profile. Button and profile numbers are + included in written data. The data has to be 2082 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When written, this file lets one write the respective profile + buttons back to the mouse. The data has to be 59 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When written, this file lets one write the respective profile + settings back to the mouse. The data has to be 31 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse has a tracking- and a distance-control-unit. These + can be activated/deactivated and the lift-off distance can be + set. The data has to be 6 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: Used to active some easy* functions of the mouse from outside. + The data has to be 16 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written a calibration process for the tracking control unit + can be initiated/cancelled. Also lets one read/write sensor + registers. + The data has to be 4 bytes long. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image +Date: December 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read the mouse returns a 30x30 pixel image of the + sampled underground. This works only in the course of a + calibration process initiated with tcu. + The returned data is 1028 bytes in size. + This file is readonly. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus new file mode 100644 index 000000000..ab01631e1 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus @@ -0,0 +1,116 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 1-4. + When read, this attribute returns the number of the active + cpi level. + This file is readonly. + Has never been used. If bookkeeping is done, it's done in userland tools. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the active + profile. + When written, the mouse activates this profile immediately. + The profile that's active when powered down is the same that's + active when the mouse is powered on. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 1-10. + When read, this attribute returns the number of the actual + sensitivity in x direction. + This file is readonly. + Has never been used. If bookkeeping is done, it's done in userland tools. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 1-10. + When read, this attribute returns the number of the actual + sensitivity in y direction. + This file is readonly. + Has never been used. If bookkeeping is done, it's done in userland tools. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the raw integer version number of the + firmware reported by the mouse. Using the integer value eases + further usage in other programs. To receive the real version + number the decimal point has to be shifted 2 positions to the + left. E.g. a returned value of 121 means 1.21 + This file is readonly. + Obsoleted by binary sysfs attribute "info". +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info +Date: November 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns general data like firmware version. + When written, the device can be reset. + The data is 6 bytes long. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When written, this file lets one write the respective profile + buttons back to the mouse. The data has to be 23 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When read, these files return the respective profile buttons. + The returned data is 23 bytes in size. + This file is readonly. + Write control to select profile and read profile_buttons instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When written, this file lets one write the respective profile + settings back to the mouse. The data has to be 16 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings +Date: January 2011 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When read, these files return the respective profile settings. + The returned data is 16 bytes in size. + This file is readonly. + Write control to select profile and read profile_settings instead. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua new file mode 100644 index 000000000..31c6c4c8b --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-lua @@ -0,0 +1,7 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/control +Date: October 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, cpi, button and light settings can be configured. + When read, actual cpi setting and sensor data are returned. + The data has to be 8 bytes long. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra new file mode 100644 index 000000000..66545c587 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra @@ -0,0 +1,126 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: It is possible to switch the cpi setting of the mouse with the + press of a button. + When read, this file returns the raw number of the actual cpi + setting reported by the mouse. This number has to be further + processed to receive the real dpi value: + + ===== ==== + VALUE DPI + ===== ==== + 1 400 + 2 800 + 4 1600 + ===== ==== + + This file is readonly. + Has never been used. If bookkeeping is done, it's done in userland tools. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the number of the actual profile in + range 0-4. + This file is readonly. + Please use binary attribute "settings" which provides this information. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the raw integer version number of the + firmware reported by the mouse. Using the integer value eases + further usage in other programs. To receive the real version + number the decimal point has to be shifted 2 positions to the + left. E.g. a returned value of 138 means 1.38 + This file is readonly. + Please use binary attribute "info" which provides this information. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info +Date: November 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns general data like firmware version. + When written, the device can be reset. + The data is 6 bytes long. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When written, this file lets one write the respective profile + buttons back to the mouse. The data has to be 19 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_buttons holds information about button layout. + When read, these files return the respective profile buttons. + The returned data is 19 bytes in size. + This file is readonly. + Write control to select profile and read profile_buttons instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When written, this file lets one write the respective profile + settings back to the mouse. The data has to be 13 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split in settings and buttons. + profile_settings holds information like resolution, sensitivity + and light effects. + When read, these files return the respective profile settings. + The returned data is 13 bytes in size. + This file is readonly. + Write control to select profile and read profile_settings instead. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns the settings stored in the mouse. + The size of the data is 3 bytes and holds information on the + startup_profile. + When written, this file lets write settings back to the mouse. + The data has to be 3 bytes long. The mouse will reject invalid + data. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile +Date: August 2010 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The integer value of this attribute ranges from 0-4. + When read, this attribute returns the number of the profile + that's active when the mouse is powered on. + This file is readonly. + Please use binary attribute "settings" which provides this information. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos new file mode 100644 index 000000000..1d6a8cf9d --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-ryos @@ -0,0 +1,178 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/control +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one select which data from which + profile will be read next. The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/profile +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. profile holds index of actual profile. + This value is persistent, so its value determines the profile + that's active when the device is powered on next time. + When written, the device activates the set profile immediately. + The data has to be 3 bytes long. + The device will reject invalid data. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_primary +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the default of all keys for + a specific profile. Profile index is included in written data. + The data has to be 125 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_function +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the + function keys for a specific profile. Profile index is included + in written data. The data has to be 95 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_macro +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the macro + keys for a specific profile. Profile index is included in + written data. The data has to be 35 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_thumbster +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the + thumbster keys for a specific profile. Profile index is included + in written data. The data has to be 23 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_extra +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the + capslock and function keys for a specific profile. Profile index + is included in written data. The data has to be 8 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/keys_easyzone +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the function of the + easyzone keys for a specific profile. Profile index is included + in written data. The data has to be 294 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/key_mask +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one deactivate certain keys like + windows and application keys, to prevent accidental presses. + Profile index for which this settings occur is included in + written data. The data has to be 6 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the backlight intensity for + a specific profile. Profile index is included in written data. + This attribute is only valid for the glow and pro variant. + The data has to be 16 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/macro +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one store macros with max 480 + keystrokes for a specific button for a specific profile. + Button and profile indexes are included in written data. + The data has to be 2002 bytes long. + Before reading this file, control has to be written to select + which profile and key to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/info +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns general data like firmware version. + The data is 8 bytes long. + This file is readonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/reset +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one reset the device. + The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/talk +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one trigger easyshift functionality + from the host. + The data has to be 16 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_control +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one switch between stored and custom + light settings. + This attribute is only valid for the pro variant. + The data has to be 8 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/stored_lights +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set per-key lighting for different + layers. + This attribute is only valid for the pro variant. + The data has to be 1382 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/custom_lights +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set the actual per-key lighting. + This attribute is only valid for the pro variant. + The data has to be 20 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/ryos/roccatryos<minor>/light_macro +Date: October 2013 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one set a light macro that is looped + whenever the device gets in dimness mode. + This attribute is only valid for the pro variant. + The data has to be 2002 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu new file mode 100644 index 000000000..99fda67fc --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-hid-roccat-savu @@ -0,0 +1,77 @@ +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/buttons +Date: Mai 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split into general settings and + button settings. The buttons variable holds information about + button layout. When written, this file lets one write the + respective profile buttons to the mouse. The data has to be + 47 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/control +Date: Mai 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one select which data from which + profile will be read next. The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/general +Date: Mai 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split into general settings and + button settings. A profile holds information like resolution, + sensitivity and light effects. + When written, this file lets one write the respective profile + settings back to the mouse. The data has to be 43 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/info +Date: Mai 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When read, this file returns general data like firmware version. + When written, the device can be reset. + The data is 8 bytes long. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro +Date: Mai 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: When written, this file lets one store macros with max 500 + keystrokes for a specific button for a specific profile. + Button and profile numbers are included in written data. + The data has to be 2083 bytes long. + Before reading this file, control has to be written to select + which profile and key to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/profile +Date: Mai 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse can store 5 profiles which can be switched by the + press of a button. profile holds number of actual profile. + This value is persistent, so its value determines the profile + that's active when the mouse is powered on next time. + When written, the mouse activates the set profile immediately. + The data has to be 3 bytes long. + The mouse will reject invalid data. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/sensor +Date: July 2012 +Contact: Stefan Achatz <erazor_de@users.sourceforge.net> +Description: The mouse has a Avago ADNS-3090 sensor. + This file allows reading and writing of the mouse sensors registers. + The data has to be 4 bytes long. +Users: http://roccat.sourceforge.net diff --git a/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt new file mode 100644 index 000000000..39d5659f3 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-driver-intel_pmc_bxt @@ -0,0 +1,22 @@ +These files allow sending arbitrary IPC commands to the PMC/SCU which +may be dangerous. These will be removed eventually and should not be +used in any new applications. + +What: /sys/bus/platform/devices/INT34D2:00/simplecmd +Date: Jun 2015 +KernelVersion: 4.1 +Contact: Mika Westerberg <mika.westerberg@linux.intel.com> +Description: This interface allows userspace to send an arbitrary + IPC command to the PMC/SCU. + + Format: %d %d where first number is command and + second number is subcommand. + +What: /sys/bus/platform/devices/INT34D2:00/northpeak +Date: Jun 2015 +KernelVersion: 4.1 +Contact: Mika Westerberg <mika.westerberg@linux.intel.com> +Description: This interface allows userspace to enable and disable + Northpeak through the PMC/SCU. + + Format: %u. diff --git a/Documentation/ABI/obsolete/sysfs-firmware-acpi b/Documentation/ABI/obsolete/sysfs-firmware-acpi new file mode 100644 index 000000000..6715a71be --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-firmware-acpi @@ -0,0 +1,8 @@ +What: /sys/firmware/acpi/hotplug/force_remove +Date: Mar 2017 +Contact: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +Description: + Since the force_remove is inherently broken and dangerous to + use for some hotplugable resources like memory (because ignoring + the offline failure might lead to memory corruption and crashes) + enabling this knob is not safe and thus unsupported. diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio new file mode 100644 index 000000000..b8b0fd341 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -0,0 +1,32 @@ +What: /sys/class/gpio/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: Linus Walleij <linusw@kernel.org> +Description: + + As a Kconfig option, individual GPIO signals may be accessed from + userspace. GPIOs are only made available to userspace by an explicit + "export" operation. If a given GPIO is not claimed for use by + kernel code, it may be exported by userspace (and unexported later). + Kernel code may export it for complete or partial access. + + GPIOs are identified as they are inside the kernel, using integers in + the range 0..INT_MAX. See Documentation/admin-guide/gpio for more information. + + :: + + /sys/class/gpio + /export ... asks the kernel to export a GPIO to userspace + /unexport ... to return a GPIO to the kernel + /gpioN ... for each exported GPIO #N OR + /<LINE-NAME> ... for a properly named GPIO line + /value ... always readable, writes fail for input GPIOs + /direction ... r/w as: in, out (default low); write: high, low + /edge ... r/w as: none, falling, rising, both + /gpiochipN ... for each gpiochip; #N is its first GPIO + /base ... (r/o) same as N + /label ... (r/o) descriptive, not necessarily unique + /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1) + + This ABI is deprecated and will be removed after 2020. It is + replaced with the GPIO character device. diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled b/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled new file mode 100644 index 000000000..e9c2de8b3 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_enabled @@ -0,0 +1,9 @@ +This ABI is renamed and moved to a new location /sys/kernel/fadump/enabled. + +What: /sys/kernel/fadump_enabled +Date: Feb 2012 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Primarily used to identify whether the FADump is enabled in + the kernel or not. +User: Kdump service diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered b/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered new file mode 100644 index 000000000..0360be39c --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_registered @@ -0,0 +1,10 @@ +This ABI is renamed and moved to a new location /sys/kernel/fadump/registered.¬ + +What: /sys/kernel/fadump_registered +Date: Feb 2012 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + Helps to control the dump collect feature from userspace. + Setting 1 to this file enables the system to collect the + dump and 0 to disable it. +User: Kdump service diff --git a/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem b/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem new file mode 100644 index 000000000..6ce0b129a --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-kernel-fadump_release_mem @@ -0,0 +1,10 @@ +This ABI is renamed and moved to a new location /sys/kernel/fadump/release_mem.¬ + +What: /sys/kernel/fadump_release_mem +Date: Feb 2012 +Contact: linuxppc-dev@lists.ozlabs.org +Description: write only + This is a special sysfs file and only available when + the system is booted to capture the vmcore using FADump. + It is used to release the memory reserved by FADump to + save the crash dump. diff --git a/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot b/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot new file mode 100644 index 000000000..ed6b52ca2 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot @@ -0,0 +1,23 @@ +What: /sys/fs/selinux/checkreqprot +Date: April 2005 (predates git) +KernelVersion: 2.6.12-rc2 (predates git) +Contact: selinux@vger.kernel.org +Description: + + The selinuxfs "checkreqprot" node allows SELinux to be configured + to check the protection requested by userspace for mmap/mprotect + calls instead of the actual protection applied by the kernel. + This was a compatibility mechanism for legacy userspace and + for the READ_IMPLIES_EXEC personality flag. However, if set to + 1, it weakens security by allowing mappings to be made executable + without authorization by policy. The default value of checkreqprot + at boot was changed starting in Linux v4.4 to 0 (i.e. check the + actual protection), and Android and Linux distributions have been + explicitly writing a "0" to /sys/fs/selinux/checkreqprot during + initialization for some time. Support for setting checkreqprot to 1 + will be removed no sooner than June 2021, at which point the kernel + will always cease using checkreqprot internally and will always + check the actual protections being applied upon mmap/mprotect calls. + The checkreqprot selinuxfs node will remain for backward compatibility + but will discard writes of the "0" value and will reject writes of the + "1" value when this mechanism is removed. diff --git a/Documentation/ABI/obsolete/sysfs-selinux-disable b/Documentation/ABI/obsolete/sysfs-selinux-disable new file mode 100644 index 000000000..c340278e3 --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-selinux-disable @@ -0,0 +1,26 @@ +What: /sys/fs/selinux/disable +Date: April 2005 (predates git) +KernelVersion: 2.6.12-rc2 (predates git) +Contact: selinux@vger.kernel.org +Description: + + The selinuxfs "disable" node allows SELinux to be disabled at runtime + prior to a policy being loaded into the kernel. If disabled via this + mechanism, SELinux will remain disabled until the system is rebooted. + + The preferred method of disabling SELinux is via the "selinux=0" boot + parameter, but the selinuxfs "disable" node was created to make it + easier for systems with primitive bootloaders that did not allow for + easy modification of the kernel command line. Unfortunately, allowing + for SELinux to be disabled at runtime makes it difficult to secure the + kernel's LSM hooks using the "__ro_after_init" feature. + + Thankfully, the need for the SELinux runtime disable appears to be + gone, the default Kconfig configuration disables this selinuxfs node, + and only one of the major distributions, Fedora, supports disabling + SELinux at runtime. Fedora is in the process of removing the + selinuxfs "disable" node and once that is complete we will start the + slow process of removing this code from the kernel. + + More information on /sys/fs/selinux/disable can be found under the + CONFIG_SECURITY_SELINUX_DISABLE Kconfig option. |