diff options
Diffstat (limited to 'Documentation/admin-guide/LSM')
| -rw-r--r-- | Documentation/admin-guide/LSM/LoadPin.rst | 31 | ||||
| -rw-r--r-- | Documentation/admin-guide/LSM/SELinux.rst | 33 | ||||
| -rw-r--r-- | Documentation/admin-guide/LSM/SafeSetID.rst | 118 | ||||
| -rw-r--r-- | Documentation/admin-guide/LSM/Smack.rst | 861 | ||||
| -rw-r--r-- | Documentation/admin-guide/LSM/Yama.rst | 75 | ||||
| -rw-r--r-- | Documentation/admin-guide/LSM/apparmor.rst | 51 | ||||
| -rw-r--r-- | Documentation/admin-guide/LSM/index.rst | 49 | ||||
| -rw-r--r-- | Documentation/admin-guide/LSM/tomoyo.rst | 65 |
8 files changed, 1283 insertions, 0 deletions
diff --git a/Documentation/admin-guide/LSM/LoadPin.rst b/Documentation/admin-guide/LSM/LoadPin.rst new file mode 100644 index 000000000..716ad9b23 --- /dev/null +++ b/Documentation/admin-guide/LSM/LoadPin.rst @@ -0,0 +1,31 @@ +======= +LoadPin +======= + +LoadPin is a Linux Security Module that ensures all kernel-loaded files +(modules, firmware, etc) all originate from the same filesystem, with +the expectation that such a filesystem is backed by a read-only device +such as dm-verity or CDROM. This allows systems that have a verified +and/or unchangeable filesystem to enforce module and firmware loading +restrictions without needing to sign the files individually. + +The LSM is selectable at build-time with ``CONFIG_SECURITY_LOADPIN``, and +can be controlled at boot-time with the kernel command line option +"``loadpin.enabled``". By default, it is enabled, but can be disabled at +boot ("``loadpin.enabled=0``"). + +LoadPin starts pinning when it sees the first file loaded. If the +block device backing the filesystem is not read-only, a sysctl is +created to toggle pinning: ``/proc/sys/kernel/loadpin/enabled``. (Having +a mutable filesystem means pinning is mutable too, but having the +sysctl allows for easy testing on systems with a mutable filesystem.) + +It's also possible to exclude specific file types from LoadPin using kernel +command line option "``loadpin.exclude``". By default, all files are +included, but they can be excluded using kernel command line option such +as "``loadpin.exclude=kernel-module,kexec-image``". This allows to use +different mechanisms such as ``CONFIG_MODULE_SIG`` and +``CONFIG_KEXEC_VERIFY_SIG`` to verify kernel module and kernel image while +still use LoadPin to protect the integrity of other files kernel loads. The +full list of valid file types can be found in ``kernel_read_file_str`` +defined in ``include/linux/fs.h``. diff --git a/Documentation/admin-guide/LSM/SELinux.rst b/Documentation/admin-guide/LSM/SELinux.rst new file mode 100644 index 000000000..520a1c2c6 --- /dev/null +++ b/Documentation/admin-guide/LSM/SELinux.rst @@ -0,0 +1,33 @@ +======= +SELinux +======= + +If you want to use SELinux, chances are you will want +to use the distro-provided policies, or install the +latest reference policy release from + + https://github.com/SELinuxProject/refpolicy + +However, if you want to install a dummy policy for +testing, you can do using ``mdp`` provided under +scripts/selinux. Note that this requires the selinux +userspace to be installed - in particular you will +need checkpolicy to compile a kernel, and setfiles and +fixfiles to label the filesystem. + + 1. Compile the kernel with selinux enabled. + 2. Type ``make`` to compile ``mdp``. + 3. Make sure that you are not running with + SELinux enabled and a real policy. If + you are, reboot with selinux disabled + before continuing. + 4. Run install_policy.sh:: + + cd scripts/selinux + sh install_policy.sh + +Step 4 will create a new dummy policy valid for your +kernel, with a single selinux user, role, and type. +It will compile the policy, will set your ``SELINUXTYPE`` to +``dummy`` in ``/etc/selinux/config``, install the compiled policy +as ``dummy``, and relabel your filesystem. diff --git a/Documentation/admin-guide/LSM/SafeSetID.rst b/Documentation/admin-guide/LSM/SafeSetID.rst new file mode 100644 index 000000000..0ec34863c --- /dev/null +++ b/Documentation/admin-guide/LSM/SafeSetID.rst @@ -0,0 +1,118 @@ +========= +SafeSetID +========= +SafeSetID is an LSM module that gates the setid family of syscalls to restrict +UID/GID transitions from a given UID/GID to only those approved by a +system-wide allowlist. These restrictions also prohibit the given UIDs/GIDs +from obtaining auxiliary privileges associated with CAP_SET{U/G}ID, such as +allowing a user to set up user namespace UID/GID mappings. + + +Background +========== +In absence of file capabilities, processes spawned on a Linux system that need +to switch to a different user must be spawned with CAP_SETUID privileges. +CAP_SETUID is granted to programs running as root or those running as a non-root +user that have been explicitly given the CAP_SETUID runtime capability. It is +often preferable to use Linux runtime capabilities rather than file +capabilities, since using file capabilities to run a program with elevated +privileges opens up possible security holes since any user with access to the +file can exec() that program to gain the elevated privileges. + +While it is possible to implement a tree of processes by giving full +CAP_SET{U/G}ID capabilities, this is often at odds with the goals of running a +tree of processes under non-root user(s) in the first place. Specifically, +since CAP_SETUID allows changing to any user on the system, including the root +user, it is an overpowered capability for what is needed in this scenario, +especially since programs often only call setuid() to drop privileges to a +lesser-privileged user -- not elevate privileges. Unfortunately, there is no +generally feasible way in Linux to restrict the potential UIDs that a user can +switch to through setuid() beyond allowing a switch to any user on the system. +This SafeSetID LSM seeks to provide a solution for restricting setid +capabilities in such a way. + +The main use case for this LSM is to allow a non-root program to transition to +other untrusted uids without full blown CAP_SETUID capabilities. The non-root +program would still need CAP_SETUID to do any kind of transition, but the +additional restrictions imposed by this LSM would mean it is a "safer" version +of CAP_SETUID since the non-root program cannot take advantage of CAP_SETUID to +do any unapproved actions (e.g. setuid to uid 0 or create/enter new user +namespace). The higher level goal is to allow for uid-based sandboxing of system +services without having to give out CAP_SETUID all over the place just so that +non-root programs can drop to even-lesser-privileged uids. This is especially +relevant when one non-root daemon on the system should be allowed to spawn other +processes as different uids, but its undesirable to give the daemon a +basically-root-equivalent CAP_SETUID. + + +Other Approaches Considered +=========================== + +Solve this problem in userspace +------------------------------- +For candidate applications that would like to have restricted setid capabilities +as implemented in this LSM, an alternative option would be to simply take away +setid capabilities from the application completely and refactor the process +spawning semantics in the application (e.g. by using a privileged helper program +to do process spawning and UID/GID transitions). Unfortunately, there are a +number of semantics around process spawning that would be affected by this, such +as fork() calls where the program doesn't immediately call exec() after the +fork(), parent processes specifying custom environment variables or command line +args for spawned child processes, or inheritance of file handles across a +fork()/exec(). Because of this, as solution that uses a privileged helper in +userspace would likely be less appealing to incorporate into existing projects +that rely on certain process-spawning semantics in Linux. + +Use user namespaces +------------------- +Another possible approach would be to run a given process tree in its own user +namespace and give programs in the tree setid capabilities. In this way, +programs in the tree could change to any desired UID/GID in the context of their +own user namespace, and only approved UIDs/GIDs could be mapped back to the +initial system user namespace, affectively preventing privilege escalation. +Unfortunately, it is not generally feasible to use user namespaces in isolation, +without pairing them with other namespace types, which is not always an option. +Linux checks for capabilities based off of the user namespace that "owns" some +entity. For example, Linux has the notion that network namespaces are owned by +the user namespace in which they were created. A consequence of this is that +capability checks for access to a given network namespace are done by checking +whether a task has the given capability in the context of the user namespace +that owns the network namespace -- not necessarily the user namespace under +which the given task runs. Therefore spawning a process in a new user namespace +effectively prevents it from accessing the network namespace owned by the +initial namespace. This is a deal-breaker for any application that expects to +retain the CAP_NET_ADMIN capability for the purpose of adjusting network +configurations. Using user namespaces in isolation causes problems regarding +other system interactions, including use of pid namespaces and device creation. + +Use an existing LSM +------------------- +None of the other in-tree LSMs have the capability to gate setid transitions, or +even employ the security_task_fix_setuid hook at all. SELinux says of that hook: +"Since setuid only affects the current process, and since the SELinux controls +are not based on the Linux identity attributes, SELinux does not need to control +this operation." + + +Directions for use +================== +This LSM hooks the setid syscalls to make sure transitions are allowed if an +applicable restriction policy is in place. Policies are configured through +securityfs by writing to the safesetid/uid_allowlist_policy and +safesetid/gid_allowlist_policy files at the location where securityfs is +mounted. The format for adding a policy is '<UID>:<UID>' or '<GID>:<GID>', +using literal numbers, and ending with a newline character such as '123:456\n'. +Writing an empty string "" will flush the policy. Again, configuring a policy +for a UID/GID will prevent that UID/GID from obtaining auxiliary setid +privileges, such as allowing a user to set up user namespace UID/GID mappings. + +Note on GID policies and setgroups() +==================================== +In v5.9 we are adding support for limiting CAP_SETGID privileges as was done +previously for CAP_SETUID. However, for compatibility with common sandboxing +related code conventions in userspace, we currently allow arbitrary +setgroups() calls for processes with CAP_SETGID restrictions. Until we add +support in a future release for restricting setgroups() calls, these GID +policies add no meaningful security. setgroups() restrictions will be enforced +once we have the policy checking code in place, which will rely on GID policy +configuration code added in v5.9. diff --git a/Documentation/admin-guide/LSM/Smack.rst b/Documentation/admin-guide/LSM/Smack.rst new file mode 100644 index 000000000..6d44f4fdb --- /dev/null +++ b/Documentation/admin-guide/LSM/Smack.rst @@ -0,0 +1,861 @@ +===== +Smack +===== + + + "Good for you, you've decided to clean the elevator!" + - The Elevator, from Dark Star + +Smack is the Simplified Mandatory Access Control Kernel. +Smack is a kernel based implementation of mandatory access +control that includes simplicity in its primary design goals. + +Smack is not the only Mandatory Access Control scheme +available for Linux. Those new to Mandatory Access Control +are encouraged to compare Smack with the other mechanisms +available to determine which is best suited to the problem +at hand. + +Smack consists of three major components: + + - The kernel + - Basic utilities, which are helpful but not required + - Configuration data + +The kernel component of Smack is implemented as a Linux +Security Modules (LSM) module. It requires netlabel and +works best with file systems that support extended attributes, +although xattr support is not strictly required. +It is safe to run a Smack kernel under a "vanilla" distribution. + +Smack kernels use the CIPSO IP option. Some network +configurations are intolerant of IP options and can impede +access to systems that use them as Smack does. + +Smack is used in the Tizen operating system. Please +go to http://wiki.tizen.org for information about how +Smack is used in Tizen. + +The current git repository for Smack user space is: + + git://github.com/smack-team/smack.git + +This should make and install on most modern distributions. +There are five commands included in smackutil: + +chsmack: + display or set Smack extended attribute values + +smackctl: + load the Smack access rules + +smackaccess: + report if a process with one label has access + to an object with another + +These two commands are obsolete with the introduction of +the smackfs/load2 and smackfs/cipso2 interfaces. + +smackload: + properly formats data for writing to smackfs/load + +smackcipso: + properly formats data for writing to smackfs/cipso + +In keeping with the intent of Smack, configuration data is +minimal and not strictly required. The most important +configuration step is mounting the smackfs pseudo filesystem. +If smackutil is installed the startup script will take care +of this, but it can be manually as well. + +Add this line to ``/etc/fstab``:: + + smackfs /sys/fs/smackfs smackfs defaults 0 0 + +The ``/sys/fs/smackfs`` directory is created by the kernel. + +Smack uses extended attributes (xattrs) to store labels on filesystem +objects. The attributes are stored in the extended attribute security +name space. A process must have ``CAP_MAC_ADMIN`` to change any of these +attributes. + +The extended attributes that Smack uses are: + +SMACK64 + Used to make access control decisions. In almost all cases + the label given to a new filesystem object will be the label + of the process that created it. + +SMACK64EXEC + The Smack label of a process that execs a program file with + this attribute set will run with this attribute's value. + +SMACK64MMAP + Don't allow the file to be mmapped by a process whose Smack + label does not allow all of the access permitted to a process + with the label contained in this attribute. This is a very + specific use case for shared libraries. + +SMACK64TRANSMUTE + Can only have the value "TRUE". If this attribute is present + on a directory when an object is created in the directory and + the Smack rule (more below) that permitted the write access + to the directory includes the transmute ("t") mode the object + gets the label of the directory instead of the label of the + creating process. If the object being created is a directory + the SMACK64TRANSMUTE attribute is set as well. + +SMACK64IPIN + This attribute is only available on file descriptors for sockets. + Use the Smack label in this attribute for access control + decisions on packets being delivered to this socket. + +SMACK64IPOUT + This attribute is only available on file descriptors for sockets. + Use the Smack label in this attribute for access control + decisions on packets coming from this socket. + +There are multiple ways to set a Smack label on a file:: + + # attr -S -s SMACK64 -V "value" path + # chsmack -a value path + +A process can see the Smack label it is running with by +reading ``/proc/self/attr/current``. A process with ``CAP_MAC_ADMIN`` +can set the process Smack by writing there. + +Most Smack configuration is accomplished by writing to files +in the smackfs filesystem. This pseudo-filesystem is mounted +on ``/sys/fs/smackfs``. + +access + Provided for backward compatibility. The access2 interface + is preferred and should be used instead. + This interface reports whether a subject with the specified + Smack label has a particular access to an object with a + specified Smack label. Write a fixed format access rule to + this file. The next read will indicate whether the access + would be permitted. The text will be either "1" indicating + access, or "0" indicating denial. + +access2 + This interface reports whether a subject with the specified + Smack label has a particular access to an object with a + specified Smack label. Write a long format access rule to + this file. The next read will indicate whether the access + would be permitted. The text will be either "1" indicating + access, or "0" indicating denial. + +ambient + This contains the Smack label applied to unlabeled network + packets. + +change-rule + This interface allows modification of existing access control rules. + The format accepted on write is:: + + "%s %s %s %s" + + where the first string is the subject label, the second the + object label, the third the access to allow and the fourth the + access to deny. The access strings may contain only the characters + "rwxat-". If a rule for a given subject and object exists it will be + modified by enabling the permissions in the third string and disabling + those in the fourth string. If there is no such rule it will be + created using the access specified in the third and the fourth strings. + +cipso + Provided for backward compatibility. The cipso2 interface + is preferred and should be used instead. + This interface allows a specific CIPSO header to be assigned + to a Smack label. The format accepted on write is:: + + "%24s%4d%4d"["%4d"]... + + The first string is a fixed Smack label. The first number is + the level to use. The second number is the number of categories. + The following numbers are the categories:: + + "level-3-cats-5-19 3 2 5 19" + +cipso2 + This interface allows a specific CIPSO header to be assigned + to a Smack label. The format accepted on write is:: + + "%s%4d%4d"["%4d"]... + + The first string is a long Smack label. The first number is + the level to use. The second number is the number of categories. + The following numbers are the categories:: + + "level-3-cats-5-19 3 2 5 19" + +direct + This contains the CIPSO level used for Smack direct label + representation in network packets. + +doi + This contains the CIPSO domain of interpretation used in + network packets. + +ipv6host + This interface allows specific IPv6 internet addresses to be + treated as single label hosts. Packets are sent to single + label hosts only from processes that have Smack write access + to the host label. All packets received from single label hosts + are given the specified label. The format accepted on write is:: + + "%h:%h:%h:%h:%h:%h:%h:%h label" or + "%h:%h:%h:%h:%h:%h:%h:%h/%d label". + + The "::" address shortcut is not supported. + If label is "-DELETE" a matched entry will be deleted. + +load + Provided for backward compatibility. The load2 interface + is preferred and should be used instead. + This interface allows access control rules in addition to + the system defined rules to be specified. The format accepted + on write is:: + + "%24s%24s%5s" + + where the first string is the subject label, the second the + object label, and the third the requested access. The access + string may contain only the characters "rwxat-", and specifies + which sort of access is allowed. The "-" is a placeholder for + permissions that are not allowed. The string "r-x--" would + specify read and execute access. Labels are limited to 23 + characters in length. + +load2 + This interface allows access control rules in addition to + the system defined rules to be specified. The format accepted + on write is:: + + "%s %s %s" + + where the first string is the subject label, the second the + object label, and the third the requested access. The access + string may contain only the characters "rwxat-", and specifies + which sort of access is allowed. The "-" is a placeholder for + permissions that are not allowed. The string "r-x--" would + specify read and execute access. + +load-self + Provided for backward compatibility. The load-self2 interface + is preferred and should be used instead. + This interface allows process specific access rules to be + defined. These rules are only consulted if access would + otherwise be permitted, and are intended to provide additional + restrictions on the process. The format is the same as for + the load interface. + +load-self2 + This interface allows process specific access rules to be + defined. These rules are only consulted if access would + otherwise be permitted, and are intended to provide additional + restrictions on the process. The format is the same as for + the load2 interface. + +logging + This contains the Smack logging state. + +mapped + This contains the CIPSO level used for Smack mapped label + representation in network packets. + +netlabel + This interface allows specific internet addresses to be + treated as single label hosts. Packets are sent to single + label hosts without CIPSO headers, but only from processes + that have Smack write access to the host label. All packets + received from single label hosts are given the specified + label. The format accepted on write is:: + + "%d.%d.%d.%d label" or "%d.%d.%d.%d/%d label". + + If the label specified is "-CIPSO" the address is treated + as a host that supports CIPSO headers. + +onlycap + This contains labels processes must have for CAP_MAC_ADMIN + and ``CAP_MAC_OVERRIDE`` to be effective. If this file is empty + these capabilities are effective at for processes with any + label. The values are set by writing the desired labels, separated + by spaces, to the file or cleared by writing "-" to the file. + +ptrace + This is used to define the current ptrace policy + + 0 - default: + this is the policy that relies on Smack access rules. + For the ``PTRACE_READ`` a subject needs to have a read access on + object. For the ``PTRACE_ATTACH`` a read-write access is required. + + 1 - exact: + this is the policy that limits ``PTRACE_ATTACH``. Attach is + only allowed when subject's and object's labels are equal. + ``PTRACE_READ`` is not affected. Can be overridden with ``CAP_SYS_PTRACE``. + + 2 - draconian: + this policy behaves like the 'exact' above with an + exception that it can't be overridden with ``CAP_SYS_PTRACE``. + +revoke-subject + Writing a Smack label here sets the access to '-' for all access + rules with that subject label. + +unconfined + If the kernel is configured with ``CONFIG_SECURITY_SMACK_BRINGUP`` + a process with ``CAP_MAC_ADMIN`` can write a label into this interface. + Thereafter, accesses that involve that label will be logged and + the access permitted if it wouldn't be otherwise. Note that this + is dangerous and can ruin the proper labeling of your system. + It should never be used in production. + +relabel-self + This interface contains a list of labels to which the process can + transition to, by writing to ``/proc/self/attr/current``. + Normally a process can change its own label to any legal value, but only + if it has ``CAP_MAC_ADMIN``. This interface allows a process without + ``CAP_MAC_ADMIN`` to relabel itself to one of labels from predefined list. + A process without ``CAP_MAC_ADMIN`` can change its label only once. When it + does, this list will be cleared. + The values are set by writing the desired labels, separated + by spaces, to the file or cleared by writing "-" to the file. + +If you are using the smackload utility +you can add access rules in ``/etc/smack/accesses``. They take the form:: + + subjectlabel objectlabel access + +access is a combination of the letters rwxatb which specify the +kind of access permitted a subject with subjectlabel on an +object with objectlabel. If there is no rule no access is allowed. + +Look for additional programs on http://schaufler-ca.com + +The Simplified Mandatory Access Control Kernel (Whitepaper) +=========================================================== + +Casey Schaufler +casey@schaufler-ca.com + +Mandatory Access Control +------------------------ + +Computer systems employ a variety of schemes to constrain how information is +shared among the people and services using the machine. Some of these schemes +allow the program or user to decide what other programs or users are allowed +access to pieces of data. These schemes are called discretionary access +control mechanisms because the access control is specified at the discretion +of the user. Other schemes do not leave the decision regarding what a user or +program can access up to users or programs. These schemes are called mandatory +access control mechanisms because you don't have a choice regarding the users +or programs that have access to pieces of data. + +Bell & LaPadula +--------------- + +From the middle of the 1980's until the turn of the century Mandatory Access +Control (MAC) was very closely associated with the Bell & LaPadula security +model, a mathematical description of the United States Department of Defense +policy for marking paper documents. MAC in this form enjoyed a following +within the Capital Beltway and Scandinavian supercomputer centers but was +often sited as failing to address general needs. + +Domain Type Enforcement +----------------------- + +Around the turn of the century Domain Type Enforcement (DTE) became popular. +This scheme organizes users, programs, and data into domains that are +protected from each other. This scheme has been widely deployed as a component +of popular Linux distributions. The administrative overhead required to +maintain this scheme and the detailed understanding of the whole system +necessary to provide a secure domain mapping leads to the scheme being +disabled or used in limited ways in the majority of cases. + +Smack +----- + +Smack is a Mandatory Access Control mechanism designed to provide useful MAC +while avoiding the pitfalls of its predecessors. The limitations of Bell & +LaPadula are addressed by providing a scheme whereby access can be controlled +according to the requirements of the system and its purpose rather than those +imposed by an arcane government policy. The complexity of Domain Type +Enforcement and avoided by defining access controls in terms of the access +modes already in use. + +Smack Terminology +----------------- + +The jargon used to talk about Smack will be familiar to those who have dealt +with other MAC systems and shouldn't be too difficult for the uninitiated to +pick up. There are four terms that are used in a specific way and that are +especially important: + + Subject: + A subject is an active entity on the computer system. + On Smack a subject is a task, which is in turn the basic unit + of execution. + + Object: + An object is a passive entity on the computer system. + On Smack files of all types, IPC, and tasks can be objects. + + Access: + Any attempt by a subject to put information into or get + information from an object is an access. + + Label: + Data that identifies the Mandatory Access Control + characteristics of a subject or an object. + +These definitions are consistent with the traditional use in the security +community. There are also some terms from Linux that are likely to crop up: + + Capability: + A task that possesses a capability has permission to + violate an aspect of the system security policy, as identified by + the specific capability. A task that possesses one or more + capabilities is a privileged task, whereas a task with no + capabilities is an unprivileged task. + + Privilege: + A task that is allowed to violate the system security + policy is said to have privilege. As of this writing a task can + have privilege either by possessing capabilities or by having an + effective user of root. + +Smack Basics +------------ + +Smack is an extension to a Linux system. It enforces additional restrictions +on what subjects can access which objects, based on the labels attached to +each of the subject and the object. + +Labels +~~~~~~ + +Smack labels are ASCII character strings. They can be up to 255 characters +long, but keeping them to twenty-three characters is recommended. +Single character labels using special characters, that being anything +other than a letter or digit, are reserved for use by the Smack development +team. Smack labels are unstructured, case sensitive, and the only operation +ever performed on them is comparison for equality. Smack labels cannot +contain unprintable characters, the "/" (slash), the "\" (backslash), the "'" +(quote) and '"' (double-quote) characters. +Smack labels cannot begin with a '-'. This is reserved for special options. + +There are some predefined labels:: + + _ Pronounced "floor", a single underscore character. + ^ Pronounced "hat", a single circumflex character. + * Pronounced "star", a single asterisk character. + ? Pronounced "huh", a single question mark character. + @ Pronounced "web", a single at sign character. + +Every task on a Smack system is assigned a label. The Smack label +of a process will usually be assigned by the system initialization +mechanism. + +Access Rules +~~~~~~~~~~~~ + +Smack uses the traditional access modes of Linux. These modes are read, +execute, write, and occasionally append. There are a few cases where the +access mode may not be obvious. These include: + + Signals: + A signal is a write operation from the subject task to + the object task. + + Internet Domain IPC: + Transmission of a packet is considered a + write operation from the source task to the destination task. + +Smack restricts access based on the label attached to a subject and the label +attached to the object it is trying to access. The rules enforced are, in +order: + + 1. Any access requested by a task labeled "*" is denied. + 2. A read or execute access requested by a task labeled "^" + is permitted. + 3. A read or execute access requested on an object labeled "_" + is permitted. + 4. Any access requested on an object labeled "*" is permitted. + 5. Any access requested by a task on an object with the same + label is permitted. + 6. Any access requested that is explicitly defined in the loaded + rule set is permitted. + 7. Any other access is denied. + +Smack Access Rules +~~~~~~~~~~~~~~~~~~ + +With the isolation provided by Smack access separation is simple. There are +many interesting cases where limited access by subjects to objects with +different labels is desired. One example is the familiar spy model of +sensitivity, where a scientist working on a highly classified project would be +able to read documents of lower classifications and anything she writes will +be "born" highly classified. To accommodate such schemes Smack includes a +mechanism for specifying rules allowing access between labels. + +Access Rule Format +~~~~~~~~~~~~~~~~~~ + +The format of an access rule is:: + + subject-label object-label access + +Where subject-label is the Smack label of the task, object-label is the Smack +label of the thing being accessed, and access is a string specifying the sort +of access allowed. The access specification is searched for letters that +describe access modes: + + a: indicates that append access should be granted. + r: indicates that read access should be granted. + w: indicates that write access should be granted. + x: indicates that execute access should be granted. + t: indicates that the rule requests transmutation. + b: indicates that the rule should be reported for bring-up. + +Uppercase values for the specification letters are allowed as well. +Access mode specifications can be in any order. Examples of acceptable rules +are:: + + TopSecret Secret rx + Secret Unclass R + Manager Game x + User HR w + Snap Crackle rwxatb + New Old rRrRr + Closed Off - + +Examples of unacceptable rules are:: + + Top Secret Secret rx + Ace Ace r + Odd spells waxbeans + +Spaces are not allowed in labels. Since a subject always has access to files +with the same label specifying a rule for that case is pointless. Only +valid letters (rwxatbRWXATB) and the dash ('-') character are allowed in +access specifications. The dash is a placeholder, so "a-r" is the same +as "ar". A lone dash is used to specify that no access should be allowed. + +Applying Access Rules +~~~~~~~~~~~~~~~~~~~~~ + +The developers of Linux rarely define new sorts of things, usually importing +schemes and concepts from other systems. Most often, the other systems are +variants of Unix. Unix has many endearing properties, but consistency of +access control models is not one of them. Smack strives to treat accesses as +uniformly as is sensible while keeping with the spirit of the underlying +mechanism. + +File system objects including files, directories, named pipes, symbolic links, +and devices require access permissions that closely match those used by mode +bit access. To open a file for reading read access is required on the file. To +search a directory requires execute access. Creating a file with write access +requires both read and write access on the containing directory. Deleting a +file requires read and write access to the file and to the containing +directory. It is possible that a user may be able to see that a file exists +but not any of its attributes by the circumstance of having read access to the +containing directory but not to the differently labeled file. This is an +artifact of the file name being data in the directory, not a part of the file. + +If a directory is marked as transmuting (SMACK64TRANSMUTE=TRUE) and the +access rule that allows a process to create an object in that directory +includes 't' access the label assigned to the new object will be that +of the directory, not the creating process. This makes it much easier +for two processes with different labels to share data without granting +access to all of their files. + +IPC objects, message queues, semaphore sets, and memory segments exist in flat +namespaces and access requests are only required to match the object in +question. + +Process objects reflect tasks on the system and the Smack label used to access +them is the same Smack label that the task would use for its own access +attempts. Sending a signal via the kill() system call is a write operation +from the signaler to the recipient. Debugging a process requires both reading +and writing. Creating a new task is an internal operation that results in two +tasks with identical Smack labels and requires no access checks. + +Sockets are data structures attached to processes and sending a packet from +one process to another requires that the sender have write access to the +receiver. The receiver is not required to have read access to the sender. + +Setting Access Rules +~~~~~~~~~~~~~~~~~~~~ + +The configuration file /etc/smack/accesses contains the rules to be set at +system startup. The contents are written to the special file +/sys/fs/smackfs/load2. Rules can be added at any time and take effect +immediately. For any pair of subject and object labels there can be only +one rule, with the most recently specified overriding any earlier +specification. + +Task Attribute +~~~~~~~~~~~~~~ + +The Smack label of a process can be read from /proc/<pid>/attr/current. A +process can read its own Smack label from /proc/self/attr/current. A +privileged process can change its own Smack label by writing to +/proc/self/attr/current but not the label of another process. + +File Attribute +~~~~~~~~~~~~~~ + +The Smack label of a filesystem object is stored as an extended attribute +named SMACK64 on the file. This attribute is in the security namespace. It can +only be changed by a process with privilege. + +Privilege +~~~~~~~~~ + +A process with CAP_MAC_OVERRIDE or CAP_MAC_ADMIN is privileged. +CAP_MAC_OVERRIDE allows the process access to objects it would +be denied otherwise. CAP_MAC_ADMIN allows a process to change +Smack data, including rules and attributes. + +Smack Networking +~~~~~~~~~~~~~~~~ + +As mentioned before, Smack enforces access control on network protocol +transmissions. Every packet sent by a Smack process is tagged with its Smack +label. This is done by adding a CIPSO tag to the header of the IP packet. Each +packet received is expected to have a CIPSO tag that identifies the label and +if it lacks such a tag the network ambient label is assumed. Before the packet +is delivered a check is made to determine that a subject with the label on the +packet has write access to the receiving process and if that is not the case +the packet is dropped. + +CIPSO Configuration +~~~~~~~~~~~~~~~~~~~ + +It is normally unnecessary to specify the CIPSO configuration. The default +values used by the system handle all internal cases. Smack will compose CIPSO +label values to match the Smack labels being used without administrative +intervention. Unlabeled packets that come into the system will be given the +ambient label. + +Smack requires configuration in the case where packets from a system that is +not Smack that speaks CIPSO may be encountered. Usually this will be a Trusted +Solaris system, but there are other, less widely deployed systems out there. +CIPSO provides 3 important values, a Domain Of Interpretation (DOI), a level, +and a category set with each packet. The DOI is intended to identify a group +of systems that use compatible labeling schemes, and the DOI specified on the +Smack system must match that of the remote system or packets will be +discarded. The DOI is 3 by default. The value can be read from +/sys/fs/smackfs/doi and can be changed by writing to /sys/fs/smackfs/doi. + +The label and category set are mapped to a Smack label as defined in +/etc/smack/cipso. + +A Smack/CIPSO mapping has the form:: + + smack level [category [category]*] + +Smack does not expect the level or category sets to be related in any +particular way and does not assume or assign accesses based on them. Some +examples of mappings:: + + TopSecret 7 + TS:A,B 7 1 2 + SecBDE 5 2 4 6 + RAFTERS 7 12 26 + +The ":" and "," characters are permitted in a Smack label but have no special +meaning. + +The mapping of Smack labels to CIPSO values is defined by writing to +/sys/fs/smackfs/cipso2. + +In addition to explicit mappings Smack supports direct CIPSO mappings. One +CIPSO level is used to indicate that the category set passed in the packet is +in fact an encoding of the Smack label. The level used is 250 by default. The +value can be read from /sys/fs/smackfs/direct and changed by writing to +/sys/fs/smackfs/direct. + +Socket Attributes +~~~~~~~~~~~~~~~~~ + +There are two attributes that are associated with sockets. These attributes +can only be set by privileged tasks, but any task can read them for their own +sockets. + + SMACK64IPIN: + The Smack label of the task object. A privileged + program that will enforce policy may set this to the star label. + + SMACK64IPOUT: + The Smack label transmitted with outgoing packets. + A privileged program may set this to match the label of another + task with which it hopes to communicate. + +Smack Netlabel Exceptions +~~~~~~~~~~~~~~~~~~~~~~~~~ + +You will often find that your labeled application has to talk to the outside, +unlabeled world. To do this there's a special file /sys/fs/smackfs/netlabel +where you can add some exceptions in the form of:: + + @IP1 LABEL1 or + @IP2/MASK LABEL2 + +It means that your application will have unlabeled access to @IP1 if it has +write access on LABEL1, and access to the subnet @IP2/MASK if it has write +access on LABEL2. + +Entries in the /sys/fs/smackfs/netlabel file are matched by longest mask +first, like in classless IPv4 routing. + +A special label '@' and an option '-CIPSO' can be used there:: + + @ means Internet, any application with any label has access to it + -CIPSO means standard CIPSO networking + +If you don't know what CIPSO is and don't plan to use it, you can just do:: + + echo 127.0.0.1 -CIPSO > /sys/fs/smackfs/netlabel + echo 0.0.0.0/0 @ > /sys/fs/smackfs/netlabel + +If you use CIPSO on your 192.168.0.0/16 local network and need also unlabeled +Internet access, you can have:: + + echo 127.0.0.1 -CIPSO > /sys/fs/smackfs/netlabel + echo 192.168.0.0/16 -CIPSO > /sys/fs/smackfs/netlabel + echo 0.0.0.0/0 @ > /sys/fs/smackfs/netlabel + +Writing Applications for Smack +------------------------------ + +There are three sorts of applications that will run on a Smack system. How an +application interacts with Smack will determine what it will have to do to +work properly under Smack. + +Smack Ignorant Applications +--------------------------- + +By far the majority of applications have no reason whatever to care about the +unique properties of Smack. Since invoking a program has no impact on the +Smack label associated with the process the only concern likely to arise is +whether the process has execute access to the program. + +Smack Relevant Applications +--------------------------- + +Some programs can be improved by teaching them about Smack, but do not make +any security decisions themselves. The utility ls(1) is one example of such a +program. + +Smack Enforcing Applications +---------------------------- + +These are special programs that not only know about Smack, but participate in +the enforcement of system policy. In most cases these are the programs that +set up user sessions. There are also network services that provide information +to processes running with various labels. + +File System Interfaces +---------------------- + +Smack maintains labels on file system objects using extended attributes. The +Smack label of a file, directory, or other file system object can be obtained +using getxattr(2):: + + len = getxattr("/", "security.SMACK64", value, sizeof (value)); + +will put the Smack label of the root directory into value. A privileged +process can set the Smack label of a file system object with setxattr(2):: + + len = strlen("Rubble"); + rc = setxattr("/foo", "security.SMACK64", "Rubble", len, 0); + +will set the Smack label of /foo to "Rubble" if the program has appropriate +privilege. + +Socket Interfaces +----------------- + +The socket attributes can be read using fgetxattr(2). + +A privileged process can set the Smack label of outgoing packets with +fsetxattr(2):: + + len = strlen("Rubble"); + rc = fsetxattr(fd, "security.SMACK64IPOUT", "Rubble", len, 0); + +will set the Smack label "Rubble" on packets going out from the socket if the +program has appropriate privilege:: + + rc = fsetxattr(fd, "security.SMACK64IPIN, "*", strlen("*"), 0); + +will set the Smack label "*" as the object label against which incoming +packets will be checked if the program has appropriate privilege. + +Administration +-------------- + +Smack supports some mount options: + + smackfsdef=label: + specifies the label to give files that lack + the Smack label extended attribute. + + smackfsroot=label: + specifies the label to assign the root of the + file system if it lacks the Smack extended attribute. + + smackfshat=label: + specifies a label that must have read access to + all labels set on the filesystem. Not yet enforced. + + smackfsfloor=label: + specifies a label to which all labels set on the + filesystem must have read access. Not yet enforced. + + smackfstransmute=label: + behaves exactly like smackfsroot except that it also + sets the transmute flag on the root of the mount + +These mount options apply to all file system types. + +Smack auditing +-------------- + +If you want Smack auditing of security events, you need to set CONFIG_AUDIT +in your kernel configuration. +By default, all denied events will be audited. You can change this behavior by +writing a single character to the /sys/fs/smackfs/logging file:: + + 0 : no logging + 1 : log denied (default) + 2 : log accepted + 3 : log denied & accepted + +Events are logged as 'key=value' pairs, for each event you at least will get +the subject, the object, the rights requested, the action, the kernel function +that triggered the event, plus other pairs depending on the type of event +audited. + +Bringup Mode +------------ + +Bringup mode provides logging features that can make application +configuration and system bringup easier. Configure the kernel with +CONFIG_SECURITY_SMACK_BRINGUP to enable these features. When bringup +mode is enabled accesses that succeed due to rules marked with the "b" +access mode will logged. When a new label is introduced for processes +rules can be added aggressively, marked with the "b". The logging allows +tracking of which rules actual get used for that label. + +Another feature of bringup mode is the "unconfined" option. Writing +a label to /sys/fs/smackfs/unconfined makes subjects with that label +able to access any object, and objects with that label accessible to +all subjects. Any access that is granted because a label is unconfined +is logged. This feature is dangerous, as files and directories may +be created in places they couldn't if the policy were being enforced. diff --git a/Documentation/admin-guide/LSM/Yama.rst b/Documentation/admin-guide/LSM/Yama.rst new file mode 100644 index 000000000..d9cd937eb --- /dev/null +++ b/Documentation/admin-guide/LSM/Yama.rst @@ -0,0 +1,75 @@ +==== +Yama +==== + +Yama is a Linux Security Module that collects system-wide DAC security +protections that are not handled by the core kernel itself. This is +selectable at build-time with ``CONFIG_SECURITY_YAMA``, and can be controlled +at run-time through sysctls in ``/proc/sys/kernel/yama``: + +ptrace_scope +============ + +As Linux grows in popularity, it will become a larger target for +malware. One particularly troubling weakness of the Linux process +interfaces is that a single user is able to examine the memory and +running state of any of their processes. For example, if one application +(e.g. Pidgin) was compromised, it would be possible for an attacker to +attach to other running processes (e.g. Firefox, SSH sessions, GPG agent, +etc) to extract additional credentials and continue to expand the scope +of their attack without resorting to user-assisted phishing. + +This is not a theoretical problem. `SSH session hijacking +<https://www.blackhat.com/presentations/bh-usa-05/bh-us-05-boileau.pdf>`_ +and `arbitrary code injection +<https://c-skills.blogspot.com/2007/05/injectso.html>`_ attacks already +exist and remain possible if ptrace is allowed to operate as before. +Since ptrace is not commonly used by non-developers and non-admins, system +builders should be allowed the option to disable this debugging system. + +For a solution, some applications use ``prctl(PR_SET_DUMPABLE, ...)`` to +specifically disallow such ptrace attachment (e.g. ssh-agent), but many +do not. A more general solution is to only allow ptrace directly from a +parent to a child process (i.e. direct "gdb EXE" and "strace EXE" still +work), or with ``CAP_SYS_PTRACE`` (i.e. "gdb --pid=PID", and "strace -p PID" +still work as root). + +In mode 1, software that has defined application-specific relationships +between a debugging process and its inferior (crash handlers, etc), +``prctl(PR_SET_PTRACER, pid, ...)`` can be used. An inferior can declare which +other process (and its descendants) are allowed to call ``PTRACE_ATTACH`` +against it. Only one such declared debugging process can exists for +each inferior at a time. For example, this is used by KDE, Chromium, and +Firefox's crash handlers, and by Wine for allowing only Wine processes +to ptrace each other. If a process wishes to entirely disable these ptrace +restrictions, it can call ``prctl(PR_SET_PTRACER, PR_SET_PTRACER_ANY, ...)`` +so that any otherwise allowed process (even those in external pid namespaces) +may attach. + +The sysctl settings (writable only with ``CAP_SYS_PTRACE``) are: + +0 - classic ptrace permissions: + a process can ``PTRACE_ATTACH`` to any other + process running under the same uid, as long as it is dumpable (i.e. + did not transition uids, start privileged, or have called + ``prctl(PR_SET_DUMPABLE...)`` already). Similarly, ``PTRACE_TRACEME`` is + unchanged. + +1 - restricted ptrace: + a process must have a predefined relationship + with the inferior it wants to call ``PTRACE_ATTACH`` on. By default, + this relationship is that of only its descendants when the above + classic criteria is also met. To change the relationship, an + inferior can call ``prctl(PR_SET_PTRACER, debugger, ...)`` to declare + an allowed debugger PID to call ``PTRACE_ATTACH`` on the inferior. + Using ``PTRACE_TRACEME`` is unchanged. + +2 - admin-only attach: + only processes with ``CAP_SYS_PTRACE`` may use ptrace, either with + ``PTRACE_ATTACH`` or through children calling ``PTRACE_TRACEME``. + +3 - no attach: + no processes may use ptrace with ``PTRACE_ATTACH`` nor via + ``PTRACE_TRACEME``. Once set, this sysctl value cannot be changed. + +The original children-only logic was based on the restrictions in grsecurity. diff --git a/Documentation/admin-guide/LSM/apparmor.rst b/Documentation/admin-guide/LSM/apparmor.rst new file mode 100644 index 000000000..6cf81bbd7 --- /dev/null +++ b/Documentation/admin-guide/LSM/apparmor.rst @@ -0,0 +1,51 @@ +======== +AppArmor +======== + +What is AppArmor? +================= + +AppArmor is MAC style security extension for the Linux kernel. It implements +a task centered policy, with task "profiles" being created and loaded +from user space. Tasks on the system that do not have a profile defined for +them run in an unconfined state which is equivalent to standard Linux DAC +permissions. + +How to enable/disable +===================== + +set ``CONFIG_SECURITY_APPARMOR=y`` + +If AppArmor should be selected as the default security module then set:: + + CONFIG_DEFAULT_SECURITY="apparmor" + CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 + +Build the kernel + +If AppArmor is not the default security module it can be enabled by passing +``security=apparmor`` on the kernel's command line. + +If AppArmor is the default security module it can be disabled by passing +``apparmor=0, security=XXXX`` (where ``XXXX`` is valid security module), on the +kernel's command line. + +For AppArmor to enforce any restrictions beyond standard Linux DAC permissions +policy must be loaded into the kernel from user space (see the Documentation +and tools links). + +Documentation +============= + +Documentation can be found on the wiki, linked below. + +Links +===== + +Mailing List - apparmor@lists.ubuntu.com + +Wiki - http://wiki.apparmor.net + +User space tools - https://gitlab.com/apparmor + +Kernel module - git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor diff --git a/Documentation/admin-guide/LSM/index.rst b/Documentation/admin-guide/LSM/index.rst new file mode 100644 index 000000000..a6ba95fba --- /dev/null +++ b/Documentation/admin-guide/LSM/index.rst @@ -0,0 +1,49 @@ +=========================== +Linux Security Module Usage +=========================== + +The Linux Security Module (LSM) framework provides a mechanism for +various security checks to be hooked by new kernel extensions. The name +"module" is a bit of a misnomer since these extensions are not actually +loadable kernel modules. Instead, they are selectable at build-time via +CONFIG_DEFAULT_SECURITY and can be overridden at boot-time via the +``"security=..."`` kernel command line argument, in the case where multiple +LSMs were built into a given kernel. + +The primary users of the LSM interface are Mandatory Access Control +(MAC) extensions which provide a comprehensive security policy. Examples +include SELinux, Smack, Tomoyo, and AppArmor. In addition to the larger +MAC extensions, other extensions can be built using the LSM to provide +specific changes to system operation when these tweaks are not available +in the core functionality of Linux itself. + +The Linux capabilities modules will always be included. This may be +followed by any number of "minor" modules and at most one "major" module. +For more details on capabilities, see ``capabilities(7)`` in the Linux +man-pages project. + +A list of the active security modules can be found by reading +``/sys/kernel/security/lsm``. This is a comma separated list, and +will always include the capability module. The list reflects the +order in which checks are made. The capability module will always +be first, followed by any "minor" modules (e.g. Yama) and then +the one "major" module (e.g. SELinux) if there is one configured. + +Process attributes associated with "major" security modules should +be accessed and maintained using the special files in ``/proc/.../attr``. +A security module may maintain a module specific subdirectory there, +named after the module. ``/proc/.../attr/smack`` is provided by the Smack +security module and contains all its special files. The files directly +in ``/proc/.../attr`` remain as legacy interfaces for modules that provide +subdirectories. + +.. toctree:: + :maxdepth: 1 + + apparmor + LoadPin + SELinux + Smack + tomoyo + Yama + SafeSetID diff --git a/Documentation/admin-guide/LSM/tomoyo.rst b/Documentation/admin-guide/LSM/tomoyo.rst new file mode 100644 index 000000000..4bc9c2b4d --- /dev/null +++ b/Documentation/admin-guide/LSM/tomoyo.rst @@ -0,0 +1,65 @@ +====== +TOMOYO +====== + +What is TOMOYO? +=============== + +TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel. + +LiveCD-based tutorials are available at + +http://tomoyo.sourceforge.jp/1.8/ubuntu12.04-live.html +http://tomoyo.sourceforge.jp/1.8/centos6-live.html + +Though these tutorials use non-LSM version of TOMOYO, they are useful for you +to know what TOMOYO is. + +How to enable TOMOYO? +===================== + +Build the kernel with ``CONFIG_SECURITY_TOMOYO=y`` and pass ``security=tomoyo`` on +kernel's command line. + +Please see http://tomoyo.osdn.jp/2.5/ for details. + +Where is documentation? +======================= + +User <-> Kernel interface documentation is available at +https://tomoyo.osdn.jp/2.5/policy-specification/index.html . + +Materials we prepared for seminars and symposiums are available at +https://osdn.jp/projects/tomoyo/docs/?category_id=532&language_id=1 . +Below lists are chosen from three aspects. + +What is TOMOYO? + TOMOYO Linux Overview + https://osdn.jp/projects/tomoyo/docs/lca2009-takeda.pdf + TOMOYO Linux: pragmatic and manageable security for Linux + https://osdn.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf + TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box + https://osdn.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf + +What can TOMOYO do? + Deep inside TOMOYO Linux + https://osdn.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf + The role of "pathname based access control" in security. + https://osdn.jp/projects/tomoyo/docs/lfj2008-bof.pdf + +History of TOMOYO? + Realities of Mainlining + https://osdn.jp/projects/tomoyo/docs/lfj2008.pdf + +What is future plan? +==================== + +We believe that inode based security and name based security are complementary +and both should be used together. But unfortunately, so far, we cannot enable +multiple LSM modules at the same time. We feel sorry that you have to give up +SELinux/SMACK/AppArmor etc. when you want to use TOMOYO. + +We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM +version of TOMOYO, available at http://tomoyo.osdn.jp/1.8/ . +LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning +to port non-LSM version's functionalities to LSM versions. |