summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide/device-mapper/verity.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/admin-guide/device-mapper/verity.rst')
-rw-r--r--Documentation/admin-guide/device-mapper/verity.rst240
1 files changed, 240 insertions, 0 deletions
diff --git a/Documentation/admin-guide/device-mapper/verity.rst b/Documentation/admin-guide/device-mapper/verity.rst
new file mode 100644
index 000000000..66f71f0da
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/verity.rst
@@ -0,0 +1,240 @@
+=========
+dm-verity
+=========
+
+Device-Mapper's "verity" target provides transparent integrity checking of
+block devices using a cryptographic digest provided by the kernel crypto API.
+This target is read-only.
+
+Construction Parameters
+=======================
+
+::
+
+ <version> <dev> <hash_dev>
+ <data_block_size> <hash_block_size>
+ <num_data_blocks> <hash_start_block>
+ <algorithm> <digest> <salt>
+ [<#opt_params> <opt_params>]
+
+<version>
+ This is the type of the on-disk hash format.
+
+ 0 is the original format used in the Chromium OS.
+ The salt is appended when hashing, digests are stored continuously and
+ the rest of the block is padded with zeroes.
+
+ 1 is the current format that should be used for new devices.
+ The salt is prepended when hashing and each digest is
+ padded with zeroes to the power of two.
+
+<dev>
+ This is the device containing data, the integrity of which needs to be
+ checked. It may be specified as a path, like /dev/sdaX, or a device number,
+ <major>:<minor>.
+
+<hash_dev>
+ This is the device that supplies the hash tree data. It may be
+ specified similarly to the device path and may be the same device. If the
+ same device is used, the hash_start should be outside the configured
+ dm-verity device.
+
+<data_block_size>
+ The block size on a data device in bytes.
+ Each block corresponds to one digest on the hash device.
+
+<hash_block_size>
+ The size of a hash block in bytes.
+
+<num_data_blocks>
+ The number of data blocks on the data device. Additional blocks are
+ inaccessible. You can place hashes to the same partition as data, in this
+ case hashes are placed after <num_data_blocks>.
+
+<hash_start_block>
+ This is the offset, in <hash_block_size>-blocks, from the start of hash_dev
+ to the root block of the hash tree.
+
+<algorithm>
+ The cryptographic hash algorithm used for this device. This should
+ be the name of the algorithm, like "sha1".
+
+<digest>
+ The hexadecimal encoding of the cryptographic hash of the root hash block
+ and the salt. This hash should be trusted as there is no other authenticity
+ beyond this point.
+
+<salt>
+ The hexadecimal encoding of the salt value.
+
+<#opt_params>
+ Number of optional parameters. If there are no optional parameters,
+ the optional paramaters section can be skipped or #opt_params can be zero.
+ Otherwise #opt_params is the number of following arguments.
+
+ Example of optional parameters section:
+ 1 ignore_corruption
+
+ignore_corruption
+ Log corrupted blocks, but allow read operations to proceed normally.
+
+restart_on_corruption
+ Restart the system when a corrupted block is discovered. This option is
+ not compatible with ignore_corruption and requires user space support to
+ avoid restart loops.
+
+panic_on_corruption
+ Panic the device when a corrupted block is discovered. This option is
+ not compatible with ignore_corruption and restart_on_corruption.
+
+ignore_zero_blocks
+ Do not verify blocks that are expected to contain zeroes and always return
+ zeroes instead. This may be useful if the partition contains unused blocks
+ that are not guaranteed to contain zeroes.
+
+use_fec_from_device <fec_dev>
+ Use forward error correction (FEC) to recover from corruption if hash
+ verification fails. Use encoding data from the specified device. This
+ may be the same device where data and hash blocks reside, in which case
+ fec_start must be outside data and hash areas.
+
+ If the encoding data covers additional metadata, it must be accessible
+ on the hash device after the hash blocks.
+
+ Note: block sizes for data and hash devices must match. Also, if the
+ verity <dev> is encrypted the <fec_dev> should be too.
+
+fec_roots <num>
+ Number of generator roots. This equals to the number of parity bytes in
+ the encoding data. For example, in RS(M, N) encoding, the number of roots
+ is M-N.
+
+fec_blocks <num>
+ The number of encoding data blocks on the FEC device. The block size for
+ the FEC device is <data_block_size>.
+
+fec_start <offset>
+ This is the offset, in <data_block_size> blocks, from the start of the
+ FEC device to the beginning of the encoding data.
+
+check_at_most_once
+ Verify data blocks only the first time they are read from the data device,
+ rather than every time. This reduces the overhead of dm-verity so that it
+ can be used on systems that are memory and/or CPU constrained. However, it
+ provides a reduced level of security because only offline tampering of the
+ data device's content will be detected, not online tampering.
+
+ Hash blocks are still verified each time they are read from the hash device,
+ since verification of hash blocks is less performance critical than data
+ blocks, and a hash block will not be verified any more after all the data
+ blocks it covers have been verified anyway.
+
+root_hash_sig_key_desc <key_description>
+ This is the description of the USER_KEY that the kernel will lookup to get
+ the pkcs7 signature of the roothash. The pkcs7 signature is used to validate
+ the root hash during the creation of the device mapper block device.
+ Verification of roothash depends on the config DM_VERITY_VERIFY_ROOTHASH_SIG
+ being set in the kernel.
+
+Theory of operation
+===================
+
+dm-verity is meant to be set up as part of a verified boot path. This
+may be anything ranging from a boot using tboot or trustedgrub to just
+booting from a known-good device (like a USB drive or CD).
+
+When a dm-verity device is configured, it is expected that the caller
+has been authenticated in some way (cryptographic signatures, etc).
+After instantiation, all hashes will be verified on-demand during
+disk access. If they cannot be verified up to the root node of the
+tree, the root hash, then the I/O will fail. This should detect
+tampering with any data on the device and the hash data.
+
+Cryptographic hashes are used to assert the integrity of the device on a
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
+
+If forward error correction (FEC) support is enabled any recovery of
+corrupted data will be verified using the cryptographic hash of the
+corresponding data. This is why combining error correction with
+integrity checking is essential.
+
+Hash Tree
+---------
+
+Each node in the tree is a cryptographic hash. If it is a leaf node, the hash
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
+
+Each entry in the tree is a collection of neighboring nodes that fit in one
+block. The number is determined based on block_size and the size of the
+selected cryptographic digest algorithm. The hashes are linearly-ordered in
+this entry and any unaligned trailing space is ignored but included when
+calculating the parent node.
+
+The tree looks something like:
+
+ alg = sha256, num_blocks = 32768, block_size = 4096
+
+::
+
+ [ root ]
+ / . . . \
+ [entry_0] [entry_1]
+ / . . . \ . . . \
+ [entry_0_0] . . . [entry_0_127] . . . . [entry_1_127]
+ / ... \ / . . . \ / \
+ blk_0 ... blk_127 blk_16256 blk_16383 blk_32640 . . . blk_32767
+
+
+On-disk format
+==============
+
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
+
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
+
+Directly following the header (and with sector number padded to the next hash
+block boundary) are the hash blocks which are stored a depth at a time
+(starting from the root), sorted in order of increasing index.
+
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+
+ https://gitlab.com/cryptsetup/cryptsetup/wikis/DMVerity
+
+Status
+======
+V (for Valid) is returned if every check performed so far was valid.
+If any check failed, C (for Corruption) is returned.
+
+Example
+=======
+Set up a device::
+
+ # dmsetup create vroot --readonly --table \
+ "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
+ "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
+ "1234000000000000000000000000000000000000000000000000000000000000"
+
+A command line tool veritysetup is available to compute or verify
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository https://gitlab.com/cryptsetup/cryptsetup/
+(as a libcryptsetup extension).
+
+Create hash on the device::
+
+ # veritysetup format /dev/sda1 /dev/sda2
+ ...
+ Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device::
+
+ # veritysetup create vroot /dev/sda1 /dev/sda2 \
+ 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076