summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide/media/fimc.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/admin-guide/media/fimc.rst153
1 files changed, 153 insertions, 0 deletions
diff --git a/Documentation/admin-guide/media/fimc.rst b/Documentation/admin-guide/media/fimc.rst
new file mode 100644
index 000000000..56b149d9a
--- /dev/null
+++ b/Documentation/admin-guide/media/fimc.rst
@@ -0,0 +1,153 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+The Samsung S5P/Exynos4 FIMC driver
+===================================
+
+Copyright |copy| 2012 - 2013 Samsung Electronics Co., Ltd.
+
+The FIMC (Fully Interactive Mobile Camera) device available in Samsung
+SoC Application Processors is an integrated camera host interface, color
+space converter, image resizer and rotator. It's also capable of capturing
+data from LCD controller (FIMD) through the SoC internal writeback data
+path. There are multiple FIMC instances in the SoCs (up to 4), having
+slightly different capabilities, like pixel alignment constraints, rotator
+availability, LCD writeback support, etc. The driver is located at
+drivers/media/platform/exynos4-is directory.
+
+Supported SoCs
+--------------
+
+S5PC100 (mem-to-mem only), S5PV210, Exynos4210
+
+Supported features
+------------------
+
+- camera parallel interface capture (ITU-R.BT601/565);
+- camera serial interface capture (MIPI-CSI2);
+- memory-to-memory processing (color space conversion, scaling, mirror
+ and rotation);
+- dynamic pipeline re-configuration at runtime (re-attachment of any FIMC
+ instance to any parallel video input or any MIPI-CSI front-end);
+- runtime PM and system wide suspend/resume
+
+Not currently supported
+-----------------------
+
+- LCD writeback input
+- per frame clock gating (mem-to-mem)
+
+User space interfaces
+---------------------
+
+Media device interface
+~~~~~~~~~~~~~~~~~~~~~~
+
+The driver supports Media Controller API as defined at :ref:`media_controller`.
+The media device driver name is "Samsung S5P FIMC".
+
+The purpose of this interface is to allow changing assignment of FIMC instances
+to the SoC peripheral camera input at runtime and optionally to control internal
+connections of the MIPI-CSIS device(s) to the FIMC entities.
+
+The media device interface allows to configure the SoC for capturing image
+data from the sensor through more than one FIMC instance (e.g. for simultaneous
+viewfinder and still capture setup).
+
+Reconfiguration is done by enabling/disabling media links created by the driver
+during initialization. The internal device topology can be easily discovered
+through media entity and links enumeration.
+
+Memory-to-memory video node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+V4L2 memory-to-memory interface at /dev/video? device node. This is standalone
+video device, it has no media pads. However please note the mem-to-mem and
+capture video node operation on same FIMC instance is not allowed. The driver
+detects such cases but the applications should prevent them to avoid an
+undefined behaviour.
+
+Capture video node
+~~~~~~~~~~~~~~~~~~
+
+The driver supports V4L2 Video Capture Interface as defined at
+:ref:`devices`.
+
+At the capture and mem-to-mem video nodes only the multi-planar API is
+supported. For more details see: :ref:`planar-apis`.
+
+Camera capture subdevs
+~~~~~~~~~~~~~~~~~~~~~~
+
+Each FIMC instance exports a sub-device node (/dev/v4l-subdev?), a sub-device
+node is also created per each available and enabled at the platform level
+MIPI-CSI receiver device (currently up to two).
+
+sysfs
+~~~~~
+
+In order to enable more precise camera pipeline control through the sub-device
+API the driver creates a sysfs entry associated with "s5p-fimc-md" platform
+device. The entry path is: /sys/platform/devices/s5p-fimc-md/subdev_conf_mode.
+
+In typical use case there could be a following capture pipeline configuration:
+sensor subdev -> mipi-csi subdev -> fimc subdev -> video node
+
+When we configure these devices through sub-device API at user space, the
+configuration flow must be from left to right, and the video node is
+configured as last one.
+
+When we don't use sub-device user space API the whole configuration of all
+devices belonging to the pipeline is done at the video node driver.
+The sysfs entry allows to instruct the capture node driver not to configure
+the sub-devices (format, crop), to avoid resetting the subdevs' configuration
+when the last configuration steps at the video node is performed.
+
+For full sub-device control support (subdevs configured at user space before
+starting streaming):
+
+.. code-block:: none
+
+ # echo "sub-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode
+
+For V4L2 video node control only (subdevs configured internally by the host
+driver):
+
+.. code-block:: none
+
+ # echo "vid-dev" > /sys/platform/devices/s5p-fimc-md/subdev_conf_mode
+
+This is a default option.
+
+5. Device mapping to video and subdev device nodes
+--------------------------------------------------
+
+There are associated two video device nodes with each device instance in
+hardware - video capture and mem-to-mem and additionally a subdev node for
+more precise FIMC capture subsystem control. In addition a separate v4l2
+sub-device node is created per each MIPI-CSIS device.
+
+How to find out which /dev/video? or /dev/v4l-subdev? is assigned to which
+device?
+
+You can either grep through the kernel log to find relevant information, i.e.
+
+.. code-block:: none
+
+ # dmesg | grep -i fimc
+
+(note that udev, if present, might still have rearranged the video nodes),
+
+or retrieve the information from /dev/media? with help of the media-ctl tool:
+
+.. code-block:: none
+
+ # media-ctl -p
+
+7. Build
+--------
+
+If the driver is built as a loadable kernel module (CONFIG_VIDEO_SAMSUNG_S5P_FIMC=m)
+two modules are created (in addition to the core v4l2 modules): s5p-fimc.ko and
+optional s5p-csis.ko (MIPI-CSI receiver subdev).