summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide/pm
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/admin-guide/pm/cpufreq.rst708
-rw-r--r--Documentation/admin-guide/pm/cpufreq_drivers.rst274
-rw-r--r--Documentation/admin-guide/pm/cpuidle.rst735
-rw-r--r--Documentation/admin-guide/pm/index.rst12
-rw-r--r--Documentation/admin-guide/pm/intel-speed-select.rst917
-rw-r--r--Documentation/admin-guide/pm/intel_epb.rst41
-rw-r--r--Documentation/admin-guide/pm/intel_idle.rst268
-rw-r--r--Documentation/admin-guide/pm/intel_pstate.rst763
-rw-r--r--Documentation/admin-guide/pm/sleep-states.rst291
-rw-r--r--Documentation/admin-guide/pm/strategies.rst56
-rw-r--r--Documentation/admin-guide/pm/suspend-flows.rst270
-rw-r--r--Documentation/admin-guide/pm/system-wide.rst11
-rw-r--r--Documentation/admin-guide/pm/working-state.rst16
13 files changed, 4362 insertions, 0 deletions
diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst
new file mode 100644
index 000000000..6adb7988e
--- /dev/null
+++ b/Documentation/admin-guide/pm/cpufreq.rst
@@ -0,0 +1,708 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+.. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>`
+
+=======================
+CPU Performance Scaling
+=======================
+
+:Copyright: |copy| 2017 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+The Concept of CPU Performance Scaling
+======================================
+
+The majority of modern processors are capable of operating in a number of
+different clock frequency and voltage configurations, often referred to as
+Operating Performance Points or P-states (in ACPI terminology). As a rule,
+the higher the clock frequency and the higher the voltage, the more instructions
+can be retired by the CPU over a unit of time, but also the higher the clock
+frequency and the higher the voltage, the more energy is consumed over a unit of
+time (or the more power is drawn) by the CPU in the given P-state. Therefore
+there is a natural tradeoff between the CPU capacity (the number of instructions
+that can be executed over a unit of time) and the power drawn by the CPU.
+
+In some situations it is desirable or even necessary to run the program as fast
+as possible and then there is no reason to use any P-states different from the
+highest one (i.e. the highest-performance frequency/voltage configuration
+available). In some other cases, however, it may not be necessary to execute
+instructions so quickly and maintaining the highest available CPU capacity for a
+relatively long time without utilizing it entirely may be regarded as wasteful.
+It also may not be physically possible to maintain maximum CPU capacity for too
+long for thermal or power supply capacity reasons or similar. To cover those
+cases, there are hardware interfaces allowing CPUs to be switched between
+different frequency/voltage configurations or (in the ACPI terminology) to be
+put into different P-states.
+
+Typically, they are used along with algorithms to estimate the required CPU
+capacity, so as to decide which P-states to put the CPUs into. Of course, since
+the utilization of the system generally changes over time, that has to be done
+repeatedly on a regular basis. The activity by which this happens is referred
+to as CPU performance scaling or CPU frequency scaling (because it involves
+adjusting the CPU clock frequency).
+
+
+CPU Performance Scaling in Linux
+================================
+
+The Linux kernel supports CPU performance scaling by means of the ``CPUFreq``
+(CPU Frequency scaling) subsystem that consists of three layers of code: the
+core, scaling governors and scaling drivers.
+
+The ``CPUFreq`` core provides the common code infrastructure and user space
+interfaces for all platforms that support CPU performance scaling. It defines
+the basic framework in which the other components operate.
+
+Scaling governors implement algorithms to estimate the required CPU capacity.
+As a rule, each governor implements one, possibly parametrized, scaling
+algorithm.
+
+Scaling drivers talk to the hardware. They provide scaling governors with
+information on the available P-states (or P-state ranges in some cases) and
+access platform-specific hardware interfaces to change CPU P-states as requested
+by scaling governors.
+
+In principle, all available scaling governors can be used with every scaling
+driver. That design is based on the observation that the information used by
+performance scaling algorithms for P-state selection can be represented in a
+platform-independent form in the majority of cases, so it should be possible
+to use the same performance scaling algorithm implemented in exactly the same
+way regardless of which scaling driver is used. Consequently, the same set of
+scaling governors should be suitable for every supported platform.
+
+However, that observation may not hold for performance scaling algorithms
+based on information provided by the hardware itself, for example through
+feedback registers, as that information is typically specific to the hardware
+interface it comes from and may not be easily represented in an abstract,
+platform-independent way. For this reason, ``CPUFreq`` allows scaling drivers
+to bypass the governor layer and implement their own performance scaling
+algorithms. That is done by the |intel_pstate| scaling driver.
+
+
+``CPUFreq`` Policy Objects
+==========================
+
+In some cases the hardware interface for P-state control is shared by multiple
+CPUs. That is, for example, the same register (or set of registers) is used to
+control the P-state of multiple CPUs at the same time and writing to it affects
+all of those CPUs simultaneously.
+
+Sets of CPUs sharing hardware P-state control interfaces are represented by
+``CPUFreq`` as struct cpufreq_policy objects. For consistency,
+struct cpufreq_policy is also used when there is only one CPU in the given
+set.
+
+The ``CPUFreq`` core maintains a pointer to a struct cpufreq_policy object for
+every CPU in the system, including CPUs that are currently offline. If multiple
+CPUs share the same hardware P-state control interface, all of the pointers
+corresponding to them point to the same struct cpufreq_policy object.
+
+``CPUFreq`` uses struct cpufreq_policy as its basic data type and the design
+of its user space interface is based on the policy concept.
+
+
+CPU Initialization
+==================
+
+First of all, a scaling driver has to be registered for ``CPUFreq`` to work.
+It is only possible to register one scaling driver at a time, so the scaling
+driver is expected to be able to handle all CPUs in the system.
+
+The scaling driver may be registered before or after CPU registration. If
+CPUs are registered earlier, the driver core invokes the ``CPUFreq`` core to
+take a note of all of the already registered CPUs during the registration of the
+scaling driver. In turn, if any CPUs are registered after the registration of
+the scaling driver, the ``CPUFreq`` core will be invoked to take note of them
+at their registration time.
+
+In any case, the ``CPUFreq`` core is invoked to take note of any logical CPU it
+has not seen so far as soon as it is ready to handle that CPU. [Note that the
+logical CPU may be a physical single-core processor, or a single core in a
+multicore processor, or a hardware thread in a physical processor or processor
+core. In what follows "CPU" always means "logical CPU" unless explicitly stated
+otherwise and the word "processor" is used to refer to the physical part
+possibly including multiple logical CPUs.]
+
+Once invoked, the ``CPUFreq`` core checks if the policy pointer is already set
+for the given CPU and if so, it skips the policy object creation. Otherwise,
+a new policy object is created and initialized, which involves the creation of
+a new policy directory in ``sysfs``, and the policy pointer corresponding to
+the given CPU is set to the new policy object's address in memory.
+
+Next, the scaling driver's ``->init()`` callback is invoked with the policy
+pointer of the new CPU passed to it as the argument. That callback is expected
+to initialize the performance scaling hardware interface for the given CPU (or,
+more precisely, for the set of CPUs sharing the hardware interface it belongs
+to, represented by its policy object) and, if the policy object it has been
+called for is new, to set parameters of the policy, like the minimum and maximum
+frequencies supported by the hardware, the table of available frequencies (if
+the set of supported P-states is not a continuous range), and the mask of CPUs
+that belong to the same policy (including both online and offline CPUs). That
+mask is then used by the core to populate the policy pointers for all of the
+CPUs in it.
+
+The next major initialization step for a new policy object is to attach a
+scaling governor to it (to begin with, that is the default scaling governor
+determined by the kernel command line or configuration, but it may be changed
+later via ``sysfs``). First, a pointer to the new policy object is passed to
+the governor's ``->init()`` callback which is expected to initialize all of the
+data structures necessary to handle the given policy and, possibly, to add
+a governor ``sysfs`` interface to it. Next, the governor is started by
+invoking its ``->start()`` callback.
+
+That callback is expected to register per-CPU utilization update callbacks for
+all of the online CPUs belonging to the given policy with the CPU scheduler.
+The utilization update callbacks will be invoked by the CPU scheduler on
+important events, like task enqueue and dequeue, on every iteration of the
+scheduler tick or generally whenever the CPU utilization may change (from the
+scheduler's perspective). They are expected to carry out computations needed
+to determine the P-state to use for the given policy going forward and to
+invoke the scaling driver to make changes to the hardware in accordance with
+the P-state selection. The scaling driver may be invoked directly from
+scheduler context or asynchronously, via a kernel thread or workqueue, depending
+on the configuration and capabilities of the scaling driver and the governor.
+
+Similar steps are taken for policy objects that are not new, but were "inactive"
+previously, meaning that all of the CPUs belonging to them were offline. The
+only practical difference in that case is that the ``CPUFreq`` core will attempt
+to use the scaling governor previously used with the policy that became
+"inactive" (and is re-initialized now) instead of the default governor.
+
+In turn, if a previously offline CPU is being brought back online, but some
+other CPUs sharing the policy object with it are online already, there is no
+need to re-initialize the policy object at all. In that case, it only is
+necessary to restart the scaling governor so that it can take the new online CPU
+into account. That is achieved by invoking the governor's ``->stop`` and
+``->start()`` callbacks, in this order, for the entire policy.
+
+As mentioned before, the |intel_pstate| scaling driver bypasses the scaling
+governor layer of ``CPUFreq`` and provides its own P-state selection algorithms.
+Consequently, if |intel_pstate| is used, scaling governors are not attached to
+new policy objects. Instead, the driver's ``->setpolicy()`` callback is invoked
+to register per-CPU utilization update callbacks for each policy. These
+callbacks are invoked by the CPU scheduler in the same way as for scaling
+governors, but in the |intel_pstate| case they both determine the P-state to
+use and change the hardware configuration accordingly in one go from scheduler
+context.
+
+The policy objects created during CPU initialization and other data structures
+associated with them are torn down when the scaling driver is unregistered
+(which happens when the kernel module containing it is unloaded, for example) or
+when the last CPU belonging to the given policy in unregistered.
+
+
+Policy Interface in ``sysfs``
+=============================
+
+During the initialization of the kernel, the ``CPUFreq`` core creates a
+``sysfs`` directory (kobject) called ``cpufreq`` under
+:file:`/sys/devices/system/cpu/`.
+
+That directory contains a ``policyX`` subdirectory (where ``X`` represents an
+integer number) for every policy object maintained by the ``CPUFreq`` core.
+Each ``policyX`` directory is pointed to by ``cpufreq`` symbolic links
+under :file:`/sys/devices/system/cpu/cpuY/` (where ``Y`` represents an integer
+that may be different from the one represented by ``X``) for all of the CPUs
+associated with (or belonging to) the given policy. The ``policyX`` directories
+in :file:`/sys/devices/system/cpu/cpufreq` each contain policy-specific
+attributes (files) to control ``CPUFreq`` behavior for the corresponding policy
+objects (that is, for all of the CPUs associated with them).
+
+Some of those attributes are generic. They are created by the ``CPUFreq`` core
+and their behavior generally does not depend on what scaling driver is in use
+and what scaling governor is attached to the given policy. Some scaling drivers
+also add driver-specific attributes to the policy directories in ``sysfs`` to
+control policy-specific aspects of driver behavior.
+
+The generic attributes under :file:`/sys/devices/system/cpu/cpufreq/policyX/`
+are the following:
+
+``affected_cpus``
+ List of online CPUs belonging to this policy (i.e. sharing the hardware
+ performance scaling interface represented by the ``policyX`` policy
+ object).
+
+``bios_limit``
+ If the platform firmware (BIOS) tells the OS to apply an upper limit to
+ CPU frequencies, that limit will be reported through this attribute (if
+ present).
+
+ The existence of the limit may be a result of some (often unintentional)
+ BIOS settings, restrictions coming from a service processor or another
+ BIOS/HW-based mechanisms.
+
+ This does not cover ACPI thermal limitations which can be discovered
+ through a generic thermal driver.
+
+ This attribute is not present if the scaling driver in use does not
+ support it.
+
+``cpuinfo_cur_freq``
+ Current frequency of the CPUs belonging to this policy as obtained from
+ the hardware (in KHz).
+
+ This is expected to be the frequency the hardware actually runs at.
+ If that frequency cannot be determined, this attribute should not
+ be present.
+
+``cpuinfo_max_freq``
+ Maximum possible operating frequency the CPUs belonging to this policy
+ can run at (in kHz).
+
+``cpuinfo_min_freq``
+ Minimum possible operating frequency the CPUs belonging to this policy
+ can run at (in kHz).
+
+``cpuinfo_transition_latency``
+ The time it takes to switch the CPUs belonging to this policy from one
+ P-state to another, in nanoseconds.
+
+ If unknown or if known to be so high that the scaling driver does not
+ work with the `ondemand`_ governor, -1 (:c:macro:`CPUFREQ_ETERNAL`)
+ will be returned by reads from this attribute.
+
+``related_cpus``
+ List of all (online and offline) CPUs belonging to this policy.
+
+``scaling_available_governors``
+ List of ``CPUFreq`` scaling governors present in the kernel that can
+ be attached to this policy or (if the |intel_pstate| scaling driver is
+ in use) list of scaling algorithms provided by the driver that can be
+ applied to this policy.
+
+ [Note that some governors are modular and it may be necessary to load a
+ kernel module for the governor held by it to become available and be
+ listed by this attribute.]
+
+``scaling_cur_freq``
+ Current frequency of all of the CPUs belonging to this policy (in kHz).
+
+ In the majority of cases, this is the frequency of the last P-state
+ requested by the scaling driver from the hardware using the scaling
+ interface provided by it, which may or may not reflect the frequency
+ the CPU is actually running at (due to hardware design and other
+ limitations).
+
+ Some architectures (e.g. ``x86``) may attempt to provide information
+ more precisely reflecting the current CPU frequency through this
+ attribute, but that still may not be the exact current CPU frequency as
+ seen by the hardware at the moment.
+
+``scaling_driver``
+ The scaling driver currently in use.
+
+``scaling_governor``
+ The scaling governor currently attached to this policy or (if the
+ |intel_pstate| scaling driver is in use) the scaling algorithm
+ provided by the driver that is currently applied to this policy.
+
+ This attribute is read-write and writing to it will cause a new scaling
+ governor to be attached to this policy or a new scaling algorithm
+ provided by the scaling driver to be applied to it (in the
+ |intel_pstate| case), as indicated by the string written to this
+ attribute (which must be one of the names listed by the
+ ``scaling_available_governors`` attribute described above).
+
+``scaling_max_freq``
+ Maximum frequency the CPUs belonging to this policy are allowed to be
+ running at (in kHz).
+
+ This attribute is read-write and writing a string representing an
+ integer to it will cause a new limit to be set (it must not be lower
+ than the value of the ``scaling_min_freq`` attribute).
+
+``scaling_min_freq``
+ Minimum frequency the CPUs belonging to this policy are allowed to be
+ running at (in kHz).
+
+ This attribute is read-write and writing a string representing a
+ non-negative integer to it will cause a new limit to be set (it must not
+ be higher than the value of the ``scaling_max_freq`` attribute).
+
+``scaling_setspeed``
+ This attribute is functional only if the `userspace`_ scaling governor
+ is attached to the given policy.
+
+ It returns the last frequency requested by the governor (in kHz) or can
+ be written to in order to set a new frequency for the policy.
+
+
+Generic Scaling Governors
+=========================
+
+``CPUFreq`` provides generic scaling governors that can be used with all
+scaling drivers. As stated before, each of them implements a single, possibly
+parametrized, performance scaling algorithm.
+
+Scaling governors are attached to policy objects and different policy objects
+can be handled by different scaling governors at the same time (although that
+may lead to suboptimal results in some cases).
+
+The scaling governor for a given policy object can be changed at any time with
+the help of the ``scaling_governor`` policy attribute in ``sysfs``.
+
+Some governors expose ``sysfs`` attributes to control or fine-tune the scaling
+algorithms implemented by them. Those attributes, referred to as governor
+tunables, can be either global (system-wide) or per-policy, depending on the
+scaling driver in use. If the driver requires governor tunables to be
+per-policy, they are located in a subdirectory of each policy directory.
+Otherwise, they are located in a subdirectory under
+:file:`/sys/devices/system/cpu/cpufreq/`. In either case the name of the
+subdirectory containing the governor tunables is the name of the governor
+providing them.
+
+``performance``
+---------------
+
+When attached to a policy object, this governor causes the highest frequency,
+within the ``scaling_max_freq`` policy limit, to be requested for that policy.
+
+The request is made once at that time the governor for the policy is set to
+``performance`` and whenever the ``scaling_max_freq`` or ``scaling_min_freq``
+policy limits change after that.
+
+``powersave``
+-------------
+
+When attached to a policy object, this governor causes the lowest frequency,
+within the ``scaling_min_freq`` policy limit, to be requested for that policy.
+
+The request is made once at that time the governor for the policy is set to
+``powersave`` and whenever the ``scaling_max_freq`` or ``scaling_min_freq``
+policy limits change after that.
+
+``userspace``
+-------------
+
+This governor does not do anything by itself. Instead, it allows user space
+to set the CPU frequency for the policy it is attached to by writing to the
+``scaling_setspeed`` attribute of that policy.
+
+``schedutil``
+-------------
+
+This governor uses CPU utilization data available from the CPU scheduler. It
+generally is regarded as a part of the CPU scheduler, so it can access the
+scheduler's internal data structures directly.
+
+It runs entirely in scheduler context, although in some cases it may need to
+invoke the scaling driver asynchronously when it decides that the CPU frequency
+should be changed for a given policy (that depends on whether or not the driver
+is capable of changing the CPU frequency from scheduler context).
+
+The actions of this governor for a particular CPU depend on the scheduling class
+invoking its utilization update callback for that CPU. If it is invoked by the
+RT or deadline scheduling classes, the governor will increase the frequency to
+the allowed maximum (that is, the ``scaling_max_freq`` policy limit). In turn,
+if it is invoked by the CFS scheduling class, the governor will use the
+Per-Entity Load Tracking (PELT) metric for the root control group of the
+given CPU as the CPU utilization estimate (see the *Per-entity load tracking*
+LWN.net article [1]_ for a description of the PELT mechanism). Then, the new
+CPU frequency to apply is computed in accordance with the formula
+
+ f = 1.25 * ``f_0`` * ``util`` / ``max``
+
+where ``util`` is the PELT number, ``max`` is the theoretical maximum of
+``util``, and ``f_0`` is either the maximum possible CPU frequency for the given
+policy (if the PELT number is frequency-invariant), or the current CPU frequency
+(otherwise).
+
+This governor also employs a mechanism allowing it to temporarily bump up the
+CPU frequency for tasks that have been waiting on I/O most recently, called
+"IO-wait boosting". That happens when the :c:macro:`SCHED_CPUFREQ_IOWAIT` flag
+is passed by the scheduler to the governor callback which causes the frequency
+to go up to the allowed maximum immediately and then draw back to the value
+returned by the above formula over time.
+
+This governor exposes only one tunable:
+
+``rate_limit_us``
+ Minimum time (in microseconds) that has to pass between two consecutive
+ runs of governor computations (default: 1000 times the scaling driver's
+ transition latency).
+
+ The purpose of this tunable is to reduce the scheduler context overhead
+ of the governor which might be excessive without it.
+
+This governor generally is regarded as a replacement for the older `ondemand`_
+and `conservative`_ governors (described below), as it is simpler and more
+tightly integrated with the CPU scheduler, its overhead in terms of CPU context
+switches and similar is less significant, and it uses the scheduler's own CPU
+utilization metric, so in principle its decisions should not contradict the
+decisions made by the other parts of the scheduler.
+
+``ondemand``
+------------
+
+This governor uses CPU load as a CPU frequency selection metric.
+
+In order to estimate the current CPU load, it measures the time elapsed between
+consecutive invocations of its worker routine and computes the fraction of that
+time in which the given CPU was not idle. The ratio of the non-idle (active)
+time to the total CPU time is taken as an estimate of the load.
+
+If this governor is attached to a policy shared by multiple CPUs, the load is
+estimated for all of them and the greatest result is taken as the load estimate
+for the entire policy.
+
+The worker routine of this governor has to run in process context, so it is
+invoked asynchronously (via a workqueue) and CPU P-states are updated from
+there if necessary. As a result, the scheduler context overhead from this
+governor is minimum, but it causes additional CPU context switches to happen
+relatively often and the CPU P-state updates triggered by it can be relatively
+irregular. Also, it affects its own CPU load metric by running code that
+reduces the CPU idle time (even though the CPU idle time is only reduced very
+slightly by it).
+
+It generally selects CPU frequencies proportional to the estimated load, so that
+the value of the ``cpuinfo_max_freq`` policy attribute corresponds to the load of
+1 (or 100%), and the value of the ``cpuinfo_min_freq`` policy attribute
+corresponds to the load of 0, unless when the load exceeds a (configurable)
+speedup threshold, in which case it will go straight for the highest frequency
+it is allowed to use (the ``scaling_max_freq`` policy limit).
+
+This governor exposes the following tunables:
+
+``sampling_rate``
+ This is how often the governor's worker routine should run, in
+ microseconds.
+
+ Typically, it is set to values of the order of 10000 (10 ms). Its
+ default value is equal to the value of ``cpuinfo_transition_latency``
+ for each policy this governor is attached to (but since the unit here
+ is greater by 1000, this means that the time represented by
+ ``sampling_rate`` is 1000 times greater than the transition latency by
+ default).
+
+ If this tunable is per-policy, the following shell command sets the time
+ represented by it to be 750 times as high as the transition latency::
+
+ # echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) > ondemand/sampling_rate
+
+``up_threshold``
+ If the estimated CPU load is above this value (in percent), the governor
+ will set the frequency to the maximum value allowed for the policy.
+ Otherwise, the selected frequency will be proportional to the estimated
+ CPU load.
+
+``ignore_nice_load``
+ If set to 1 (default 0), it will cause the CPU load estimation code to
+ treat the CPU time spent on executing tasks with "nice" levels greater
+ than 0 as CPU idle time.
+
+ This may be useful if there are tasks in the system that should not be
+ taken into account when deciding what frequency to run the CPUs at.
+ Then, to make that happen it is sufficient to increase the "nice" level
+ of those tasks above 0 and set this attribute to 1.
+
+``sampling_down_factor``
+ Temporary multiplier, between 1 (default) and 100 inclusive, to apply to
+ the ``sampling_rate`` value if the CPU load goes above ``up_threshold``.
+
+ This causes the next execution of the governor's worker routine (after
+ setting the frequency to the allowed maximum) to be delayed, so the
+ frequency stays at the maximum level for a longer time.
+
+ Frequency fluctuations in some bursty workloads may be avoided this way
+ at the cost of additional energy spent on maintaining the maximum CPU
+ capacity.
+
+``powersave_bias``
+ Reduction factor to apply to the original frequency target of the
+ governor (including the maximum value used when the ``up_threshold``
+ value is exceeded by the estimated CPU load) or sensitivity threshold
+ for the AMD frequency sensitivity powersave bias driver
+ (:file:`drivers/cpufreq/amd_freq_sensitivity.c`), between 0 and 1000
+ inclusive.
+
+ If the AMD frequency sensitivity powersave bias driver is not loaded,
+ the effective frequency to apply is given by
+
+ f * (1 - ``powersave_bias`` / 1000)
+
+ where f is the governor's original frequency target. The default value
+ of this attribute is 0 in that case.
+
+ If the AMD frequency sensitivity powersave bias driver is loaded, the
+ value of this attribute is 400 by default and it is used in a different
+ way.
+
+ On Family 16h (and later) AMD processors there is a mechanism to get a
+ measured workload sensitivity, between 0 and 100% inclusive, from the
+ hardware. That value can be used to estimate how the performance of the
+ workload running on a CPU will change in response to frequency changes.
+
+ The performance of a workload with the sensitivity of 0 (memory-bound or
+ IO-bound) is not expected to increase at all as a result of increasing
+ the CPU frequency, whereas workloads with the sensitivity of 100%
+ (CPU-bound) are expected to perform much better if the CPU frequency is
+ increased.
+
+ If the workload sensitivity is less than the threshold represented by
+ the ``powersave_bias`` value, the sensitivity powersave bias driver
+ will cause the governor to select a frequency lower than its original
+ target, so as to avoid over-provisioning workloads that will not benefit
+ from running at higher CPU frequencies.
+
+``conservative``
+----------------
+
+This governor uses CPU load as a CPU frequency selection metric.
+
+It estimates the CPU load in the same way as the `ondemand`_ governor described
+above, but the CPU frequency selection algorithm implemented by it is different.
+
+Namely, it avoids changing the frequency significantly over short time intervals
+which may not be suitable for systems with limited power supply capacity (e.g.
+battery-powered). To achieve that, it changes the frequency in relatively
+small steps, one step at a time, up or down - depending on whether or not a
+(configurable) threshold has been exceeded by the estimated CPU load.
+
+This governor exposes the following tunables:
+
+``freq_step``
+ Frequency step in percent of the maximum frequency the governor is
+ allowed to set (the ``scaling_max_freq`` policy limit), between 0 and
+ 100 (5 by default).
+
+ This is how much the frequency is allowed to change in one go. Setting
+ it to 0 will cause the default frequency step (5 percent) to be used
+ and setting it to 100 effectively causes the governor to periodically
+ switch the frequency between the ``scaling_min_freq`` and
+ ``scaling_max_freq`` policy limits.
+
+``down_threshold``
+ Threshold value (in percent, 20 by default) used to determine the
+ frequency change direction.
+
+ If the estimated CPU load is greater than this value, the frequency will
+ go up (by ``freq_step``). If the load is less than this value (and the
+ ``sampling_down_factor`` mechanism is not in effect), the frequency will
+ go down. Otherwise, the frequency will not be changed.
+
+``sampling_down_factor``
+ Frequency decrease deferral factor, between 1 (default) and 10
+ inclusive.
+
+ It effectively causes the frequency to go down ``sampling_down_factor``
+ times slower than it ramps up.
+
+
+Frequency Boost Support
+=======================
+
+Background
+----------
+
+Some processors support a mechanism to raise the operating frequency of some
+cores in a multicore package temporarily (and above the sustainable frequency
+threshold for the whole package) under certain conditions, for example if the
+whole chip is not fully utilized and below its intended thermal or power budget.
+
+Different names are used by different vendors to refer to this functionality.
+For Intel processors it is referred to as "Turbo Boost", AMD calls it
+"Turbo-Core" or (in technical documentation) "Core Performance Boost" and so on.
+As a rule, it also is implemented differently by different vendors. The simple
+term "frequency boost" is used here for brevity to refer to all of those
+implementations.
+
+The frequency boost mechanism may be either hardware-based or software-based.
+If it is hardware-based (e.g. on x86), the decision to trigger the boosting is
+made by the hardware (although in general it requires the hardware to be put
+into a special state in which it can control the CPU frequency within certain
+limits). If it is software-based (e.g. on ARM), the scaling driver decides
+whether or not to trigger boosting and when to do that.
+
+The ``boost`` File in ``sysfs``
+-------------------------------
+
+This file is located under :file:`/sys/devices/system/cpu/cpufreq/` and controls
+the "boost" setting for the whole system. It is not present if the underlying
+scaling driver does not support the frequency boost mechanism (or supports it,
+but provides a driver-specific interface for controlling it, like
+|intel_pstate|).
+
+If the value in this file is 1, the frequency boost mechanism is enabled. This
+means that either the hardware can be put into states in which it is able to
+trigger boosting (in the hardware-based case), or the software is allowed to
+trigger boosting (in the software-based case). It does not mean that boosting
+is actually in use at the moment on any CPUs in the system. It only means a
+permission to use the frequency boost mechanism (which still may never be used
+for other reasons).
+
+If the value in this file is 0, the frequency boost mechanism is disabled and
+cannot be used at all.
+
+The only values that can be written to this file are 0 and 1.
+
+Rationale for Boost Control Knob
+--------------------------------
+
+The frequency boost mechanism is generally intended to help to achieve optimum
+CPU performance on time scales below software resolution (e.g. below the
+scheduler tick interval) and it is demonstrably suitable for many workloads, but
+it may lead to problems in certain situations.
+
+For this reason, many systems make it possible to disable the frequency boost
+mechanism in the platform firmware (BIOS) setup, but that requires the system to
+be restarted for the setting to be adjusted as desired, which may not be
+practical at least in some cases. For example:
+
+ 1. Boosting means overclocking the processor, although under controlled
+ conditions. Generally, the processor's energy consumption increases
+ as a result of increasing its frequency and voltage, even temporarily.
+ That may not be desirable on systems that switch to power sources of
+ limited capacity, such as batteries, so the ability to disable the boost
+ mechanism while the system is running may help there (but that depends on
+ the workload too).
+
+ 2. In some situations deterministic behavior is more important than
+ performance or energy consumption (or both) and the ability to disable
+ boosting while the system is running may be useful then.
+
+ 3. To examine the impact of the frequency boost mechanism itself, it is useful
+ to be able to run tests with and without boosting, preferably without
+ restarting the system in the meantime.
+
+ 4. Reproducible results are important when running benchmarks. Since
+ the boosting functionality depends on the load of the whole package,
+ single-thread performance may vary because of it which may lead to
+ unreproducible results sometimes. That can be avoided by disabling the
+ frequency boost mechanism before running benchmarks sensitive to that
+ issue.
+
+Legacy AMD ``cpb`` Knob
+-----------------------
+
+The AMD powernow-k8 scaling driver supports a ``sysfs`` knob very similar to
+the global ``boost`` one. It is used for disabling/enabling the "Core
+Performance Boost" feature of some AMD processors.
+
+If present, that knob is located in every ``CPUFreq`` policy directory in
+``sysfs`` (:file:`/sys/devices/system/cpu/cpufreq/policyX/`) and is called
+``cpb``, which indicates a more fine grained control interface. The actual
+implementation, however, works on the system-wide basis and setting that knob
+for one policy causes the same value of it to be set for all of the other
+policies at the same time.
+
+That knob is still supported on AMD processors that support its underlying
+hardware feature, but it may be configured out of the kernel (via the
+:c:macro:`CONFIG_X86_ACPI_CPUFREQ_CPB` configuration option) and the global
+``boost`` knob is present regardless. Thus it is always possible use the
+``boost`` knob instead of the ``cpb`` one which is highly recommended, as that
+is more consistent with what all of the other systems do (and the ``cpb`` knob
+may not be supported any more in the future).
+
+The ``cpb`` knob is never present for any processors without the underlying
+hardware feature (e.g. all Intel ones), even if the
+:c:macro:`CONFIG_X86_ACPI_CPUFREQ_CPB` configuration option is set.
+
+
+References
+==========
+
+.. [1] Jonathan Corbet, *Per-entity load tracking*,
+ https://lwn.net/Articles/531853/
diff --git a/Documentation/admin-guide/pm/cpufreq_drivers.rst b/Documentation/admin-guide/pm/cpufreq_drivers.rst
new file mode 100644
index 000000000..9a134ae65
--- /dev/null
+++ b/Documentation/admin-guide/pm/cpufreq_drivers.rst
@@ -0,0 +1,274 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================================================
+Legacy Documentation of CPU Performance Scaling Drivers
+=======================================================
+
+Included below are historic documents describing assorted
+:doc:`CPU performance scaling <cpufreq>` drivers. They are reproduced verbatim,
+with the original white space formatting and indentation preserved, except for
+the added leading space character in every line of text.
+
+
+AMD PowerNow! Drivers
+=====================
+
+::
+
+ PowerNow! and Cool'n'Quiet are AMD names for frequency
+ management capabilities in AMD processors. As the hardware
+ implementation changes in new generations of the processors,
+ there is a different cpu-freq driver for each generation.
+
+ Note that the driver's will not load on the "wrong" hardware,
+ so it is safe to try each driver in turn when in doubt as to
+ which is the correct driver.
+
+ Note that the functionality to change frequency (and voltage)
+ is not available in all processors. The drivers will refuse
+ to load on processors without this capability. The capability
+ is detected with the cpuid instruction.
+
+ The drivers use BIOS supplied tables to obtain frequency and
+ voltage information appropriate for a particular platform.
+ Frequency transitions will be unavailable if the BIOS does
+ not supply these tables.
+
+ 6th Generation: powernow-k6
+
+ 7th Generation: powernow-k7: Athlon, Duron, Geode.
+
+ 8th Generation: powernow-k8: Athlon, Athlon 64, Opteron, Sempron.
+ Documentation on this functionality in 8th generation processors
+ is available in the "BIOS and Kernel Developer's Guide", publication
+ 26094, in chapter 9, available for download from www.amd.com.
+
+ BIOS supplied data, for powernow-k7 and for powernow-k8, may be
+ from either the PSB table or from ACPI objects. The ACPI support
+ is only available if the kernel config sets CONFIG_ACPI_PROCESSOR.
+ The powernow-k8 driver will attempt to use ACPI if so configured,
+ and fall back to PST if that fails.
+ The powernow-k7 driver will try to use the PSB support first, and
+ fall back to ACPI if the PSB support fails. A module parameter,
+ acpi_force, is provided to force ACPI support to be used instead
+ of PSB support.
+
+
+``cpufreq-nforce2``
+===================
+
+::
+
+ The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 platforms.
+
+ This works better than on other platforms, because the FSB of the CPU
+ can be controlled independently from the PCI/AGP clock.
+
+ The module has two options:
+
+ fid: multiplier * 10 (for example 8.5 = 85)
+ min_fsb: minimum FSB
+
+ If not set, fid is calculated from the current CPU speed and the FSB.
+ min_fsb defaults to FSB at boot time - 50 MHz.
+
+ IMPORTANT: The available range is limited downwards!
+ Also the minimum available FSB can differ, for systems
+ booting with 200 MHz, 150 should always work.
+
+
+``pcc-cpufreq``
+===============
+
+::
+
+ /*
+ * pcc-cpufreq.txt - PCC interface documentation
+ *
+ * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
+ */
+
+
+ Processor Clocking Control Driver
+ ---------------------------------
+
+ Contents:
+ ---------
+ 1. Introduction
+ 1.1 PCC interface
+ 1.1.1 Get Average Frequency
+ 1.1.2 Set Desired Frequency
+ 1.2 Platforms affected
+ 2. Driver and /sys details
+ 2.1 scaling_available_frequencies
+ 2.2 cpuinfo_transition_latency
+ 2.3 cpuinfo_cur_freq
+ 2.4 related_cpus
+ 3. Caveats
+
+ 1. Introduction:
+ ----------------
+ Processor Clocking Control (PCC) is an interface between the platform
+ firmware and OSPM. It is a mechanism for coordinating processor
+ performance (ie: frequency) between the platform firmware and the OS.
+
+ The PCC driver (pcc-cpufreq) allows OSPM to take advantage of the PCC
+ interface.
+
+ OS utilizes the PCC interface to inform platform firmware what frequency the
+ OS wants for a logical processor. The platform firmware attempts to achieve
+ the requested frequency. If the request for the target frequency could not be
+ satisfied by platform firmware, then it usually means that power budget
+ conditions are in place, and "power capping" is taking place.
+
+ 1.1 PCC interface:
+ ------------------
+ The complete PCC specification is available here:
+ https://acpica.org/sites/acpica/files/Processor-Clocking-Control-v1p0.pdf
+
+ PCC relies on a shared memory region that provides a channel for communication
+ between the OS and platform firmware. PCC also implements a "doorbell" that
+ is used by the OS to inform the platform firmware that a command has been
+ sent.
+
+ The ACPI PCCH() method is used to discover the location of the PCC shared
+ memory region. The shared memory region header contains the "command" and
+ "status" interface. PCCH() also contains details on how to access the platform
+ doorbell.
+
+ The following commands are supported by the PCC interface:
+ * Get Average Frequency
+ * Set Desired Frequency
+
+ The ACPI PCCP() method is implemented for each logical processor and is
+ used to discover the offsets for the input and output buffers in the shared
+ memory region.
+
+ When PCC mode is enabled, the platform will not expose processor performance
+ or throttle states (_PSS, _TSS and related ACPI objects) to OSPM. Therefore,
+ the native P-state driver (such as acpi-cpufreq for Intel, powernow-k8 for
+ AMD) will not load.
+
+ However, OSPM remains in control of policy. The governor (eg: "ondemand")
+ computes the required performance for each processor based on server workload.
+ The PCC driver fills in the command interface, and the input buffer and
+ communicates the request to the platform firmware. The platform firmware is
+ responsible for delivering the requested performance.
+
+ Each PCC command is "global" in scope and can affect all the logical CPUs in
+ the system. Therefore, PCC is capable of performing "group" updates. With PCC
+ the OS is capable of getting/setting the frequency of all the logical CPUs in
+ the system with a single call to the BIOS.
+
+ 1.1.1 Get Average Frequency:
+ ----------------------------
+ This command is used by the OSPM to query the running frequency of the
+ processor since the last time this command was completed. The output buffer
+ indicates the average unhalted frequency of the logical processor expressed as
+ a percentage of the nominal (ie: maximum) CPU frequency. The output buffer
+ also signifies if the CPU frequency is limited by a power budget condition.
+
+ 1.1.2 Set Desired Frequency:
+ ----------------------------
+ This command is used by the OSPM to communicate to the platform firmware the
+ desired frequency for a logical processor. The output buffer is currently
+ ignored by OSPM. The next invocation of "Get Average Frequency" will inform
+ OSPM if the desired frequency was achieved or not.
+
+ 1.2 Platforms affected:
+ -----------------------
+ The PCC driver will load on any system where the platform firmware:
+ * supports the PCC interface, and the associated PCCH() and PCCP() methods
+ * assumes responsibility for managing the hardware clocking controls in order
+ to deliver the requested processor performance
+
+ Currently, certain HP ProLiant platforms implement the PCC interface. On those
+ platforms PCC is the "default" choice.
+
+ However, it is possible to disable this interface via a BIOS setting. In
+ such an instance, as is also the case on platforms where the PCC interface
+ is not implemented, the PCC driver will fail to load silently.
+
+ 2. Driver and /sys details:
+ ---------------------------
+ When the driver loads, it merely prints the lowest and the highest CPU
+ frequencies supported by the platform firmware.
+
+ The PCC driver loads with a message such as:
+ pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2933
+ MHz
+
+ This means that the OPSM can request the CPU to run at any frequency in
+ between the limits (1600 MHz, and 2933 MHz) specified in the message.
+
+ Internally, there is no need for the driver to convert the "target" frequency
+ to a corresponding P-state.
+
+ The VERSION number for the driver will be of the format v.xy.ab.
+ eg: 1.00.02
+ ----- --
+ | |
+ | -- this will increase with bug fixes/enhancements to the driver
+ |-- this is the version of the PCC specification the driver adheres to
+
+
+ The following is a brief discussion on some of the fields exported via the
+ /sys filesystem and how their values are affected by the PCC driver:
+
+ 2.1 scaling_available_frequencies:
+ ----------------------------------
+ scaling_available_frequencies is not created in /sys. No intermediate
+ frequencies need to be listed because the BIOS will try to achieve any
+ frequency, within limits, requested by the governor. A frequency does not have
+ to be strictly associated with a P-state.
+
+ 2.2 cpuinfo_transition_latency:
+ -------------------------------
+ The cpuinfo_transition_latency field is 0. The PCC specification does
+ not include a field to expose this value currently.
+
+ 2.3 cpuinfo_cur_freq:
+ ---------------------
+ A) Often cpuinfo_cur_freq will show a value different than what is declared
+ in the scaling_available_frequencies or scaling_cur_freq, or scaling_max_freq.
+ This is due to "turbo boost" available on recent Intel processors. If certain
+ conditions are met the BIOS can achieve a slightly higher speed than requested
+ by OSPM. An example:
+
+ scaling_cur_freq : 2933000
+ cpuinfo_cur_freq : 3196000
+
+ B) There is a round-off error associated with the cpuinfo_cur_freq value.
+ Since the driver obtains the current frequency as a "percentage" (%) of the
+ nominal frequency from the BIOS, sometimes, the values displayed by
+ scaling_cur_freq and cpuinfo_cur_freq may not match. An example:
+
+ scaling_cur_freq : 1600000
+ cpuinfo_cur_freq : 1583000
+
+ In this example, the nominal frequency is 2933 MHz. The driver obtains the
+ current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency:
+
+ 54% of 2933 MHz = 1583 MHz
+
+ Nominal frequency is the maximum frequency of the processor, and it usually
+ corresponds to the frequency of the P0 P-state.
+
+ 2.4 related_cpus:
+ -----------------
+ The related_cpus field is identical to affected_cpus.
+
+ affected_cpus : 4
+ related_cpus : 4
+
+ Currently, the PCC driver does not evaluate _PSD. The platforms that support
+ PCC do not implement SW_ALL. So OSPM doesn't need to perform any coordination
+ to ensure that the same frequency is requested of all dependent CPUs.
+
+ 3. Caveats:
+ -----------
+ The "cpufreq_stats" module in its present form cannot be loaded and
+ expected to work with the PCC driver. Since the "cpufreq_stats" module
+ provides information wrt each P-state, it is not applicable to the PCC driver.
diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst
new file mode 100644
index 000000000..3596e3714
--- /dev/null
+++ b/Documentation/admin-guide/pm/cpuidle.rst
@@ -0,0 +1,735 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+.. |struct cpuidle_state| replace:: :c:type:`struct cpuidle_state <cpuidle_state>`
+.. |cpufreq| replace:: :doc:`CPU Performance Scaling <cpufreq>`
+
+========================
+CPU Idle Time Management
+========================
+
+:Copyright: |copy| 2018 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+Concepts
+========
+
+Modern processors are generally able to enter states in which the execution of
+a program is suspended and instructions belonging to it are not fetched from
+memory or executed. Those states are the *idle* states of the processor.
+
+Since part of the processor hardware is not used in idle states, entering them
+generally allows power drawn by the processor to be reduced and, in consequence,
+it is an opportunity to save energy.
+
+CPU idle time management is an energy-efficiency feature concerned about using
+the idle states of processors for this purpose.
+
+Logical CPUs
+------------
+
+CPU idle time management operates on CPUs as seen by the *CPU scheduler* (that
+is the part of the kernel responsible for the distribution of computational
+work in the system). In its view, CPUs are *logical* units. That is, they need
+not be separate physical entities and may just be interfaces appearing to
+software as individual single-core processors. In other words, a CPU is an
+entity which appears to be fetching instructions that belong to one sequence
+(program) from memory and executing them, but it need not work this way
+physically. Generally, three different cases can be consider here.
+
+First, if the whole processor can only follow one sequence of instructions (one
+program) at a time, it is a CPU. In that case, if the hardware is asked to
+enter an idle state, that applies to the processor as a whole.
+
+Second, if the processor is multi-core, each core in it is able to follow at
+least one program at a time. The cores need not be entirely independent of each
+other (for example, they may share caches), but still most of the time they
+work physically in parallel with each other, so if each of them executes only
+one program, those programs run mostly independently of each other at the same
+time. The entire cores are CPUs in that case and if the hardware is asked to
+enter an idle state, that applies to the core that asked for it in the first
+place, but it also may apply to a larger unit (say a "package" or a "cluster")
+that the core belongs to (in fact, it may apply to an entire hierarchy of larger
+units containing the core). Namely, if all of the cores in the larger unit
+except for one have been put into idle states at the "core level" and the
+remaining core asks the processor to enter an idle state, that may trigger it
+to put the whole larger unit into an idle state which also will affect the
+other cores in that unit.
+
+Finally, each core in a multi-core processor may be able to follow more than one
+program in the same time frame (that is, each core may be able to fetch
+instructions from multiple locations in memory and execute them in the same time
+frame, but not necessarily entirely in parallel with each other). In that case
+the cores present themselves to software as "bundles" each consisting of
+multiple individual single-core "processors", referred to as *hardware threads*
+(or hyper-threads specifically on Intel hardware), that each can follow one
+sequence of instructions. Then, the hardware threads are CPUs from the CPU idle
+time management perspective and if the processor is asked to enter an idle state
+by one of them, the hardware thread (or CPU) that asked for it is stopped, but
+nothing more happens, unless all of the other hardware threads within the same
+core also have asked the processor to enter an idle state. In that situation,
+the core may be put into an idle state individually or a larger unit containing
+it may be put into an idle state as a whole (if the other cores within the
+larger unit are in idle states already).
+
+Idle CPUs
+---------
+
+Logical CPUs, simply referred to as "CPUs" in what follows, are regarded as
+*idle* by the Linux kernel when there are no tasks to run on them except for the
+special "idle" task.
+
+Tasks are the CPU scheduler's representation of work. Each task consists of a
+sequence of instructions to execute, or code, data to be manipulated while
+running that code, and some context information that needs to be loaded into the
+processor every time the task's code is run by a CPU. The CPU scheduler
+distributes work by assigning tasks to run to the CPUs present in the system.
+
+Tasks can be in various states. In particular, they are *runnable* if there are
+no specific conditions preventing their code from being run by a CPU as long as
+there is a CPU available for that (for example, they are not waiting for any
+events to occur or similar). When a task becomes runnable, the CPU scheduler
+assigns it to one of the available CPUs to run and if there are no more runnable
+tasks assigned to it, the CPU will load the given task's context and run its
+code (from the instruction following the last one executed so far, possibly by
+another CPU). [If there are multiple runnable tasks assigned to one CPU
+simultaneously, they will be subject to prioritization and time sharing in order
+to allow them to make some progress over time.]
+
+The special "idle" task becomes runnable if there are no other runnable tasks
+assigned to the given CPU and the CPU is then regarded as idle. In other words,
+in Linux idle CPUs run the code of the "idle" task called *the idle loop*. That
+code may cause the processor to be put into one of its idle states, if they are
+supported, in order to save energy, but if the processor does not support any
+idle states, or there is not enough time to spend in an idle state before the
+next wakeup event, or there are strict latency constraints preventing any of the
+available idle states from being used, the CPU will simply execute more or less
+useless instructions in a loop until it is assigned a new task to run.
+
+
+.. _idle-loop:
+
+The Idle Loop
+=============
+
+The idle loop code takes two major steps in every iteration of it. First, it
+calls into a code module referred to as the *governor* that belongs to the CPU
+idle time management subsystem called ``CPUIdle`` to select an idle state for
+the CPU to ask the hardware to enter. Second, it invokes another code module
+from the ``CPUIdle`` subsystem, called the *driver*, to actually ask the
+processor hardware to enter the idle state selected by the governor.
+
+The role of the governor is to find an idle state most suitable for the
+conditions at hand. For this purpose, idle states that the hardware can be
+asked to enter by logical CPUs are represented in an abstract way independent of
+the platform or the processor architecture and organized in a one-dimensional
+(linear) array. That array has to be prepared and supplied by the ``CPUIdle``
+driver matching the platform the kernel is running on at the initialization
+time. This allows ``CPUIdle`` governors to be independent of the underlying
+hardware and to work with any platforms that the Linux kernel can run on.
+
+Each idle state present in that array is characterized by two parameters to be
+taken into account by the governor, the *target residency* and the (worst-case)
+*exit latency*. The target residency is the minimum time the hardware must
+spend in the given state, including the time needed to enter it (which may be
+substantial), in order to save more energy than it would save by entering one of
+the shallower idle states instead. [The "depth" of an idle state roughly
+corresponds to the power drawn by the processor in that state.] The exit
+latency, in turn, is the maximum time it will take a CPU asking the processor
+hardware to enter an idle state to start executing the first instruction after a
+wakeup from that state. Note that in general the exit latency also must cover
+the time needed to enter the given state in case the wakeup occurs when the
+hardware is entering it and it must be entered completely to be exited in an
+ordered manner.
+
+There are two types of information that can influence the governor's decisions.
+First of all, the governor knows the time until the closest timer event. That
+time is known exactly, because the kernel programs timers and it knows exactly
+when they will trigger, and it is the maximum time the hardware that the given
+CPU depends on can spend in an idle state, including the time necessary to enter
+and exit it. However, the CPU may be woken up by a non-timer event at any time
+(in particular, before the closest timer triggers) and it generally is not known
+when that may happen. The governor can only see how much time the CPU actually
+was idle after it has been woken up (that time will be referred to as the *idle
+duration* from now on) and it can use that information somehow along with the
+time until the closest timer to estimate the idle duration in future. How the
+governor uses that information depends on what algorithm is implemented by it
+and that is the primary reason for having more than one governor in the
+``CPUIdle`` subsystem.
+
+There are four ``CPUIdle`` governors available, ``menu``, `TEO <teo-gov_>`_,
+``ladder`` and ``haltpoll``. Which of them is used by default depends on the
+configuration of the kernel and in particular on whether or not the scheduler
+tick can be `stopped by the idle loop <idle-cpus-and-tick_>`_. Available
+governors can be read from the :file:`available_governors`, and the governor
+can be changed at runtime. The name of the ``CPUIdle`` governor currently
+used by the kernel can be read from the :file:`current_governor_ro` or
+:file:`current_governor` file under :file:`/sys/devices/system/cpu/cpuidle/`
+in ``sysfs``.
+
+Which ``CPUIdle`` driver is used, on the other hand, usually depends on the
+platform the kernel is running on, but there are platforms with more than one
+matching driver. For example, there are two drivers that can work with the
+majority of Intel platforms, ``intel_idle`` and ``acpi_idle``, one with
+hardcoded idle states information and the other able to read that information
+from the system's ACPI tables, respectively. Still, even in those cases, the
+driver chosen at the system initialization time cannot be replaced later, so the
+decision on which one of them to use has to be made early (on Intel platforms
+the ``acpi_idle`` driver will be used if ``intel_idle`` is disabled for some
+reason or if it does not recognize the processor). The name of the ``CPUIdle``
+driver currently used by the kernel can be read from the :file:`current_driver`
+file under :file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``.
+
+
+.. _idle-cpus-and-tick:
+
+Idle CPUs and The Scheduler Tick
+================================
+
+The scheduler tick is a timer that triggers periodically in order to implement
+the time sharing strategy of the CPU scheduler. Of course, if there are
+multiple runnable tasks assigned to one CPU at the same time, the only way to
+allow them to make reasonable progress in a given time frame is to make them
+share the available CPU time. Namely, in rough approximation, each task is
+given a slice of the CPU time to run its code, subject to the scheduling class,
+prioritization and so on and when that time slice is used up, the CPU should be
+switched over to running (the code of) another task. The currently running task
+may not want to give the CPU away voluntarily, however, and the scheduler tick
+is there to make the switch happen regardless. That is not the only role of the
+tick, but it is the primary reason for using it.
+
+The scheduler tick is problematic from the CPU idle time management perspective,
+because it triggers periodically and relatively often (depending on the kernel
+configuration, the length of the tick period is between 1 ms and 10 ms).
+Thus, if the tick is allowed to trigger on idle CPUs, it will not make sense
+for them to ask the hardware to enter idle states with target residencies above
+the tick period length. Moreover, in that case the idle duration of any CPU
+will never exceed the tick period length and the energy used for entering and
+exiting idle states due to the tick wakeups on idle CPUs will be wasted.
+
+Fortunately, it is not really necessary to allow the tick to trigger on idle
+CPUs, because (by definition) they have no tasks to run except for the special
+"idle" one. In other words, from the CPU scheduler perspective, the only user
+of the CPU time on them is the idle loop. Since the time of an idle CPU need
+not be shared between multiple runnable tasks, the primary reason for using the
+tick goes away if the given CPU is idle. Consequently, it is possible to stop
+the scheduler tick entirely on idle CPUs in principle, even though that may not
+always be worth the effort.
+
+Whether or not it makes sense to stop the scheduler tick in the idle loop
+depends on what is expected by the governor. First, if there is another
+(non-tick) timer due to trigger within the tick range, stopping the tick clearly
+would be a waste of time, even though the timer hardware may not need to be
+reprogrammed in that case. Second, if the governor is expecting a non-timer
+wakeup within the tick range, stopping the tick is not necessary and it may even
+be harmful. Namely, in that case the governor will select an idle state with
+the target residency within the time until the expected wakeup, so that state is
+going to be relatively shallow. The governor really cannot select a deep idle
+state then, as that would contradict its own expectation of a wakeup in short
+order. Now, if the wakeup really occurs shortly, stopping the tick would be a
+waste of time and in this case the timer hardware would need to be reprogrammed,
+which is expensive. On the other hand, if the tick is stopped and the wakeup
+does not occur any time soon, the hardware may spend indefinite amount of time
+in the shallow idle state selected by the governor, which will be a waste of
+energy. Hence, if the governor is expecting a wakeup of any kind within the
+tick range, it is better to allow the tick trigger. Otherwise, however, the
+governor will select a relatively deep idle state, so the tick should be stopped
+so that it does not wake up the CPU too early.
+
+In any case, the governor knows what it is expecting and the decision on whether
+or not to stop the scheduler tick belongs to it. Still, if the tick has been
+stopped already (in one of the previous iterations of the loop), it is better
+to leave it as is and the governor needs to take that into account.
+
+The kernel can be configured to disable stopping the scheduler tick in the idle
+loop altogether. That can be done through the build-time configuration of it
+(by unsetting the ``CONFIG_NO_HZ_IDLE`` configuration option) or by passing
+``nohz=off`` to it in the command line. In both cases, as the stopping of the
+scheduler tick is disabled, the governor's decisions regarding it are simply
+ignored by the idle loop code and the tick is never stopped.
+
+The systems that run kernels configured to allow the scheduler tick to be
+stopped on idle CPUs are referred to as *tickless* systems and they are
+generally regarded as more energy-efficient than the systems running kernels in
+which the tick cannot be stopped. If the given system is tickless, it will use
+the ``menu`` governor by default and if it is not tickless, the default
+``CPUIdle`` governor on it will be ``ladder``.
+
+
+.. _menu-gov:
+
+The ``menu`` Governor
+=====================
+
+The ``menu`` governor is the default ``CPUIdle`` governor for tickless systems.
+It is quite complex, but the basic principle of its design is straightforward.
+Namely, when invoked to select an idle state for a CPU (i.e. an idle state that
+the CPU will ask the processor hardware to enter), it attempts to predict the
+idle duration and uses the predicted value for idle state selection.
+
+It first obtains the time until the closest timer event with the assumption
+that the scheduler tick will be stopped. That time, referred to as the *sleep
+length* in what follows, is the upper bound on the time before the next CPU
+wakeup. It is used to determine the sleep length range, which in turn is needed
+to get the sleep length correction factor.
+
+The ``menu`` governor maintains two arrays of sleep length correction factors.
+One of them is used when tasks previously running on the given CPU are waiting
+for some I/O operations to complete and the other one is used when that is not
+the case. Each array contains several correction factor values that correspond
+to different sleep length ranges organized so that each range represented in the
+array is approximately 10 times wider than the previous one.
+
+The correction factor for the given sleep length range (determined before
+selecting the idle state for the CPU) is updated after the CPU has been woken
+up and the closer the sleep length is to the observed idle duration, the closer
+to 1 the correction factor becomes (it must fall between 0 and 1 inclusive).
+The sleep length is multiplied by the correction factor for the range that it
+falls into to obtain the first approximation of the predicted idle duration.
+
+Next, the governor uses a simple pattern recognition algorithm to refine its
+idle duration prediction. Namely, it saves the last 8 observed idle duration
+values and, when predicting the idle duration next time, it computes the average
+and variance of them. If the variance is small (smaller than 400 square
+milliseconds) or it is small relative to the average (the average is greater
+that 6 times the standard deviation), the average is regarded as the "typical
+interval" value. Otherwise, the longest of the saved observed idle duration
+values is discarded and the computation is repeated for the remaining ones.
+Again, if the variance of them is small (in the above sense), the average is
+taken as the "typical interval" value and so on, until either the "typical
+interval" is determined or too many data points are disregarded, in which case
+the "typical interval" is assumed to equal "infinity" (the maximum unsigned
+integer value). The "typical interval" computed this way is compared with the
+sleep length multiplied by the correction factor and the minimum of the two is
+taken as the predicted idle duration.
+
+Then, the governor computes an extra latency limit to help "interactive"
+workloads. It uses the observation that if the exit latency of the selected
+idle state is comparable with the predicted idle duration, the total time spent
+in that state probably will be very short and the amount of energy to save by
+entering it will be relatively small, so likely it is better to avoid the
+overhead related to entering that state and exiting it. Thus selecting a
+shallower state is likely to be a better option then. The first approximation
+of the extra latency limit is the predicted idle duration itself which
+additionally is divided by a value depending on the number of tasks that
+previously ran on the given CPU and now they are waiting for I/O operations to
+complete. The result of that division is compared with the latency limit coming
+from the power management quality of service, or `PM QoS <cpu-pm-qos_>`_,
+framework and the minimum of the two is taken as the limit for the idle states'
+exit latency.
+
+Now, the governor is ready to walk the list of idle states and choose one of
+them. For this purpose, it compares the target residency of each state with
+the predicted idle duration and the exit latency of it with the computed latency
+limit. It selects the state with the target residency closest to the predicted
+idle duration, but still below it, and exit latency that does not exceed the
+limit.
+
+In the final step the governor may still need to refine the idle state selection
+if it has not decided to `stop the scheduler tick <idle-cpus-and-tick_>`_. That
+happens if the idle duration predicted by it is less than the tick period and
+the tick has not been stopped already (in a previous iteration of the idle
+loop). Then, the sleep length used in the previous computations may not reflect
+the real time until the closest timer event and if it really is greater than
+that time, the governor may need to select a shallower state with a suitable
+target residency.
+
+
+.. _teo-gov:
+
+The Timer Events Oriented (TEO) Governor
+========================================
+
+The timer events oriented (TEO) governor is an alternative ``CPUIdle`` governor
+for tickless systems. It follows the same basic strategy as the ``menu`` `one
+<menu-gov_>`_: it always tries to find the deepest idle state suitable for the
+given conditions. However, it applies a different approach to that problem.
+
+First, it does not use sleep length correction factors, but instead it attempts
+to correlate the observed idle duration values with the available idle states
+and use that information to pick up the idle state that is most likely to
+"match" the upcoming CPU idle interval. Second, it does not take the tasks
+that were running on the given CPU in the past and are waiting on some I/O
+operations to complete now at all (there is no guarantee that they will run on
+the same CPU when they become runnable again) and the pattern detection code in
+it avoids taking timer wakeups into account. It also only uses idle duration
+values less than the current time till the closest timer (with the scheduler
+tick excluded) for that purpose.
+
+Like in the ``menu`` governor `case <menu-gov_>`_, the first step is to obtain
+the *sleep length*, which is the time until the closest timer event with the
+assumption that the scheduler tick will be stopped (that also is the upper bound
+on the time until the next CPU wakeup). That value is then used to preselect an
+idle state on the basis of three metrics maintained for each idle state provided
+by the ``CPUIdle`` driver: ``hits``, ``misses`` and ``early_hits``.
+
+The ``hits`` and ``misses`` metrics measure the likelihood that a given idle
+state will "match" the observed (post-wakeup) idle duration if it "matches" the
+sleep length. They both are subject to decay (after a CPU wakeup) every time
+the target residency of the idle state corresponding to them is less than or
+equal to the sleep length and the target residency of the next idle state is
+greater than the sleep length (that is, when the idle state corresponding to
+them "matches" the sleep length). The ``hits`` metric is increased if the
+former condition is satisfied and the target residency of the given idle state
+is less than or equal to the observed idle duration and the target residency of
+the next idle state is greater than the observed idle duration at the same time
+(that is, it is increased when the given idle state "matches" both the sleep
+length and the observed idle duration). In turn, the ``misses`` metric is
+increased when the given idle state "matches" the sleep length only and the
+observed idle duration is too short for its target residency.
+
+The ``early_hits`` metric measures the likelihood that a given idle state will
+"match" the observed (post-wakeup) idle duration if it does not "match" the
+sleep length. It is subject to decay on every CPU wakeup and it is increased
+when the idle state corresponding to it "matches" the observed (post-wakeup)
+idle duration and the target residency of the next idle state is less than or
+equal to the sleep length (i.e. the idle state "matching" the sleep length is
+deeper than the given one).
+
+The governor walks the list of idle states provided by the ``CPUIdle`` driver
+and finds the last (deepest) one with the target residency less than or equal
+to the sleep length. Then, the ``hits`` and ``misses`` metrics of that idle
+state are compared with each other and it is preselected if the ``hits`` one is
+greater (which means that that idle state is likely to "match" the observed idle
+duration after CPU wakeup). If the ``misses`` one is greater, the governor
+preselects the shallower idle state with the maximum ``early_hits`` metric
+(or if there are multiple shallower idle states with equal ``early_hits``
+metric which also is the maximum, the shallowest of them will be preselected).
+[If there is a wakeup latency constraint coming from the `PM QoS framework
+<cpu-pm-qos_>`_ which is hit before reaching the deepest idle state with the
+target residency within the sleep length, the deepest idle state with the exit
+latency within the constraint is preselected without consulting the ``hits``,
+``misses`` and ``early_hits`` metrics.]
+
+Next, the governor takes several idle duration values observed most recently
+into consideration and if at least a half of them are greater than or equal to
+the target residency of the preselected idle state, that idle state becomes the
+final candidate to ask for. Otherwise, the average of the most recent idle
+duration values below the target residency of the preselected idle state is
+computed and the governor walks the idle states shallower than the preselected
+one and finds the deepest of them with the target residency within that average.
+That idle state is then taken as the final candidate to ask for.
+
+Still, at this point the governor may need to refine the idle state selection if
+it has not decided to `stop the scheduler tick <idle-cpus-and-tick_>`_. That
+generally happens if the target residency of the idle state selected so far is
+less than the tick period and the tick has not been stopped already (in a
+previous iteration of the idle loop). Then, like in the ``menu`` governor
+`case <menu-gov_>`_, the sleep length used in the previous computations may not
+reflect the real time until the closest timer event and if it really is greater
+than that time, a shallower state with a suitable target residency may need to
+be selected.
+
+
+.. _idle-states-representation:
+
+Representation of Idle States
+=============================
+
+For the CPU idle time management purposes all of the physical idle states
+supported by the processor have to be represented as a one-dimensional array of
+|struct cpuidle_state| objects each allowing an individual (logical) CPU to ask
+the processor hardware to enter an idle state of certain properties. If there
+is a hierarchy of units in the processor, one |struct cpuidle_state| object can
+cover a combination of idle states supported by the units at different levels of
+the hierarchy. In that case, the `target residency and exit latency parameters
+of it <idle-loop_>`_, must reflect the properties of the idle state at the
+deepest level (i.e. the idle state of the unit containing all of the other
+units).
+
+For example, take a processor with two cores in a larger unit referred to as
+a "module" and suppose that asking the hardware to enter a specific idle state
+(say "X") at the "core" level by one core will trigger the module to try to
+enter a specific idle state of its own (say "MX") if the other core is in idle
+state "X" already. In other words, asking for idle state "X" at the "core"
+level gives the hardware a license to go as deep as to idle state "MX" at the
+"module" level, but there is no guarantee that this is going to happen (the core
+asking for idle state "X" may just end up in that state by itself instead).
+Then, the target residency of the |struct cpuidle_state| object representing
+idle state "X" must reflect the minimum time to spend in idle state "MX" of
+the module (including the time needed to enter it), because that is the minimum
+time the CPU needs to be idle to save any energy in case the hardware enters
+that state. Analogously, the exit latency parameter of that object must cover
+the exit time of idle state "MX" of the module (and usually its entry time too),
+because that is the maximum delay between a wakeup signal and the time the CPU
+will start to execute the first new instruction (assuming that both cores in the
+module will always be ready to execute instructions as soon as the module
+becomes operational as a whole).
+
+There are processors without direct coordination between different levels of the
+hierarchy of units inside them, however. In those cases asking for an idle
+state at the "core" level does not automatically affect the "module" level, for
+example, in any way and the ``CPUIdle`` driver is responsible for the entire
+handling of the hierarchy. Then, the definition of the idle state objects is
+entirely up to the driver, but still the physical properties of the idle state
+that the processor hardware finally goes into must always follow the parameters
+used by the governor for idle state selection (for instance, the actual exit
+latency of that idle state must not exceed the exit latency parameter of the
+idle state object selected by the governor).
+
+In addition to the target residency and exit latency idle state parameters
+discussed above, the objects representing idle states each contain a few other
+parameters describing the idle state and a pointer to the function to run in
+order to ask the hardware to enter that state. Also, for each
+|struct cpuidle_state| object, there is a corresponding
+:c:type:`struct cpuidle_state_usage <cpuidle_state_usage>` one containing usage
+statistics of the given idle state. That information is exposed by the kernel
+via ``sysfs``.
+
+For each CPU in the system, there is a :file:`/sys/devices/system/cpu/cpu<N>/cpuidle/`
+directory in ``sysfs``, where the number ``<N>`` is assigned to the given
+CPU at the initialization time. That directory contains a set of subdirectories
+called :file:`state0`, :file:`state1` and so on, up to the number of idle state
+objects defined for the given CPU minus one. Each of these directories
+corresponds to one idle state object and the larger the number in its name, the
+deeper the (effective) idle state represented by it. Each of them contains
+a number of files (attributes) representing the properties of the idle state
+object corresponding to it, as follows:
+
+``above``
+ Total number of times this idle state had been asked for, but the
+ observed idle duration was certainly too short to match its target
+ residency.
+
+``below``
+ Total number of times this idle state had been asked for, but certainly
+ a deeper idle state would have been a better match for the observed idle
+ duration.
+
+``desc``
+ Description of the idle state.
+
+``disable``
+ Whether or not this idle state is disabled.
+
+``default_status``
+ The default status of this state, "enabled" or "disabled".
+
+``latency``
+ Exit latency of the idle state in microseconds.
+
+``name``
+ Name of the idle state.
+
+``power``
+ Power drawn by hardware in this idle state in milliwatts (if specified,
+ 0 otherwise).
+
+``residency``
+ Target residency of the idle state in microseconds.
+
+``time``
+ Total time spent in this idle state by the given CPU (as measured by the
+ kernel) in microseconds.
+
+``usage``
+ Total number of times the hardware has been asked by the given CPU to
+ enter this idle state.
+
+``rejected``
+ Total number of times a request to enter this idle state on the given
+ CPU was rejected.
+
+The :file:`desc` and :file:`name` files both contain strings. The difference
+between them is that the name is expected to be more concise, while the
+description may be longer and it may contain white space or special characters.
+The other files listed above contain integer numbers.
+
+The :file:`disable` attribute is the only writeable one. If it contains 1, the
+given idle state is disabled for this particular CPU, which means that the
+governor will never select it for this particular CPU and the ``CPUIdle``
+driver will never ask the hardware to enter it for that CPU as a result.
+However, disabling an idle state for one CPU does not prevent it from being
+asked for by the other CPUs, so it must be disabled for all of them in order to
+never be asked for by any of them. [Note that, due to the way the ``ladder``
+governor is implemented, disabling an idle state prevents that governor from
+selecting any idle states deeper than the disabled one too.]
+
+If the :file:`disable` attribute contains 0, the given idle state is enabled for
+this particular CPU, but it still may be disabled for some or all of the other
+CPUs in the system at the same time. Writing 1 to it causes the idle state to
+be disabled for this particular CPU and writing 0 to it allows the governor to
+take it into consideration for the given CPU and the driver to ask for it,
+unless that state was disabled globally in the driver (in which case it cannot
+be used at all).
+
+The :file:`power` attribute is not defined very well, especially for idle state
+objects representing combinations of idle states at different levels of the
+hierarchy of units in the processor, and it generally is hard to obtain idle
+state power numbers for complex hardware, so :file:`power` often contains 0 (not
+available) and if it contains a nonzero number, that number may not be very
+accurate and it should not be relied on for anything meaningful.
+
+The number in the :file:`time` file generally may be greater than the total time
+really spent by the given CPU in the given idle state, because it is measured by
+the kernel and it may not cover the cases in which the hardware refused to enter
+this idle state and entered a shallower one instead of it (or even it did not
+enter any idle state at all). The kernel can only measure the time span between
+asking the hardware to enter an idle state and the subsequent wakeup of the CPU
+and it cannot say what really happened in the meantime at the hardware level.
+Moreover, if the idle state object in question represents a combination of idle
+states at different levels of the hierarchy of units in the processor,
+the kernel can never say how deep the hardware went down the hierarchy in any
+particular case. For these reasons, the only reliable way to find out how
+much time has been spent by the hardware in different idle states supported by
+it is to use idle state residency counters in the hardware, if available.
+
+Generally, an interrupt received when trying to enter an idle state causes the
+idle state entry request to be rejected, in which case the ``CPUIdle`` driver
+may return an error code to indicate that this was the case. The :file:`usage`
+and :file:`rejected` files report the number of times the given idle state
+was entered successfully or rejected, respectively.
+
+.. _cpu-pm-qos:
+
+Power Management Quality of Service for CPUs
+============================================
+
+The power management quality of service (PM QoS) framework in the Linux kernel
+allows kernel code and user space processes to set constraints on various
+energy-efficiency features of the kernel to prevent performance from dropping
+below a required level.
+
+CPU idle time management can be affected by PM QoS in two ways, through the
+global CPU latency limit and through the resume latency constraints for
+individual CPUs. Kernel code (e.g. device drivers) can set both of them with
+the help of special internal interfaces provided by the PM QoS framework. User
+space can modify the former by opening the :file:`cpu_dma_latency` special
+device file under :file:`/dev/` and writing a binary value (interpreted as a
+signed 32-bit integer) to it. In turn, the resume latency constraint for a CPU
+can be modified from user space by writing a string (representing a signed
+32-bit integer) to the :file:`power/pm_qos_resume_latency_us` file under
+:file:`/sys/devices/system/cpu/cpu<N>/` in ``sysfs``, where the CPU number
+``<N>`` is allocated at the system initialization time. Negative values
+will be rejected in both cases and, also in both cases, the written integer
+number will be interpreted as a requested PM QoS constraint in microseconds.
+
+The requested value is not automatically applied as a new constraint, however,
+as it may be less restrictive (greater in this particular case) than another
+constraint previously requested by someone else. For this reason, the PM QoS
+framework maintains a list of requests that have been made so far for the
+global CPU latency limit and for each individual CPU, aggregates them and
+applies the effective (minimum in this particular case) value as the new
+constraint.
+
+In fact, opening the :file:`cpu_dma_latency` special device file causes a new
+PM QoS request to be created and added to a global priority list of CPU latency
+limit requests and the file descriptor coming from the "open" operation
+represents that request. If that file descriptor is then used for writing, the
+number written to it will be associated with the PM QoS request represented by
+it as a new requested limit value. Next, the priority list mechanism will be
+used to determine the new effective value of the entire list of requests and
+that effective value will be set as a new CPU latency limit. Thus requesting a
+new limit value will only change the real limit if the effective "list" value is
+affected by it, which is the case if it is the minimum of the requested values
+in the list.
+
+The process holding a file descriptor obtained by opening the
+:file:`cpu_dma_latency` special device file controls the PM QoS request
+associated with that file descriptor, but it controls this particular PM QoS
+request only.
+
+Closing the :file:`cpu_dma_latency` special device file or, more precisely, the
+file descriptor obtained while opening it, causes the PM QoS request associated
+with that file descriptor to be removed from the global priority list of CPU
+latency limit requests and destroyed. If that happens, the priority list
+mechanism will be used again, to determine the new effective value for the whole
+list and that value will become the new limit.
+
+In turn, for each CPU there is one resume latency PM QoS request associated with
+the :file:`power/pm_qos_resume_latency_us` file under
+:file:`/sys/devices/system/cpu/cpu<N>/` in ``sysfs`` and writing to it causes
+this single PM QoS request to be updated regardless of which user space
+process does that. In other words, this PM QoS request is shared by the entire
+user space, so access to the file associated with it needs to be arbitrated
+to avoid confusion. [Arguably, the only legitimate use of this mechanism in
+practice is to pin a process to the CPU in question and let it use the
+``sysfs`` interface to control the resume latency constraint for it.] It is
+still only a request, however. It is an entry in a priority list used to
+determine the effective value to be set as the resume latency constraint for the
+CPU in question every time the list of requests is updated this way or another
+(there may be other requests coming from kernel code in that list).
+
+CPU idle time governors are expected to regard the minimum of the global
+(effective) CPU latency limit and the effective resume latency constraint for
+the given CPU as the upper limit for the exit latency of the idle states that
+they are allowed to select for that CPU. They should never select any idle
+states with exit latency beyond that limit.
+
+
+Idle States Control Via Kernel Command Line
+===========================================
+
+In addition to the ``sysfs`` interface allowing individual idle states to be
+`disabled for individual CPUs <idle-states-representation_>`_, there are kernel
+command line parameters affecting CPU idle time management.
+
+The ``cpuidle.off=1`` kernel command line option can be used to disable the
+CPU idle time management entirely. It does not prevent the idle loop from
+running on idle CPUs, but it prevents the CPU idle time governors and drivers
+from being invoked. If it is added to the kernel command line, the idle loop
+will ask the hardware to enter idle states on idle CPUs via the CPU architecture
+support code that is expected to provide a default mechanism for this purpose.
+That default mechanism usually is the least common denominator for all of the
+processors implementing the architecture (i.e. CPU instruction set) in question,
+however, so it is rather crude and not very energy-efficient. For this reason,
+it is not recommended for production use.
+
+The ``cpuidle.governor=`` kernel command line switch allows the ``CPUIdle``
+governor to use to be specified. It has to be appended with a string matching
+the name of an available governor (e.g. ``cpuidle.governor=menu``) and that
+governor will be used instead of the default one. It is possible to force
+the ``menu`` governor to be used on the systems that use the ``ladder`` governor
+by default this way, for example.
+
+The other kernel command line parameters controlling CPU idle time management
+described below are only relevant for the *x86* architecture and references
+to ``intel_idle`` affect Intel processors only.
+
+The *x86* architecture support code recognizes three kernel command line
+options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
+and ``idle=nomwait``. The first two of them disable the ``acpi_idle`` and
+``intel_idle`` drivers altogether, which effectively causes the entire
+``CPUIdle`` subsystem to be disabled and makes the idle loop invoke the
+architecture support code to deal with idle CPUs. How it does that depends on
+which of the two parameters is added to the kernel command line. In the
+``idle=halt`` case, the architecture support code will use the ``HLT``
+instruction of the CPUs (which, as a rule, suspends the execution of the program
+and causes the hardware to attempt to enter the shallowest available idle state)
+for this purpose, and if ``idle=poll`` is used, idle CPUs will execute a
+more or less "lightweight" sequence of instructions in a tight loop. [Note
+that using ``idle=poll`` is somewhat drastic in many cases, as preventing idle
+CPUs from saving almost any energy at all may not be the only effect of it.
+For example, on Intel hardware it effectively prevents CPUs from using
+P-states (see |cpufreq|) that require any number of CPUs in a package to be
+idle, so it very well may hurt single-thread computations performance as well as
+energy-efficiency. Thus using it for performance reasons may not be a good idea
+at all.]
+
+The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
+the CPU to enter idle states. When this option is used, the ``acpi_idle``
+driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
+running Intel processors, this option disables the ``intel_idle`` driver
+and forces the use of the ``acpi_idle`` driver instead. Note that in either
+case, ``acpi_idle`` driver will function only if all the information needed
+by it is in the system's ACPI tables.
+
+In addition to the architecture-level kernel command line options affecting CPU
+idle time management, there are parameters affecting individual ``CPUIdle``
+drivers that can be passed to them via the kernel command line. Specifically,
+the ``intel_idle.max_cstate=<n>`` and ``processor.max_cstate=<n>`` parameters,
+where ``<n>`` is an idle state index also used in the name of the given
+state's directory in ``sysfs`` (see
+`Representation of Idle States <idle-states-representation_>`_), causes the
+``intel_idle`` and ``acpi_idle`` drivers, respectively, to discard all of the
+idle states deeper than idle state ``<n>``. In that case, they will never ask
+for any of those idle states or expose them to the governor. [The behavior of
+the two drivers is different for ``<n>`` equal to ``0``. Adding
+``intel_idle.max_cstate=0`` to the kernel command line disables the
+``intel_idle`` driver and allows ``acpi_idle`` to be used, whereas
+``processor.max_cstate=0`` is equivalent to ``processor.max_cstate=1``.
+Also, the ``acpi_idle`` driver is part of the ``processor`` kernel module that
+can be loaded separately and ``max_cstate=<n>`` can be passed to it as a module
+parameter when it is loaded.]
diff --git a/Documentation/admin-guide/pm/index.rst b/Documentation/admin-guide/pm/index.rst
new file mode 100644
index 000000000..39f8f9f81
--- /dev/null
+++ b/Documentation/admin-guide/pm/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+Power Management
+================
+
+.. toctree::
+ :maxdepth: 2
+
+ strategies
+ system-wide
+ working-state
diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst b/Documentation/admin-guide/pm/intel-speed-select.rst
new file mode 100644
index 000000000..219f1359a
--- /dev/null
+++ b/Documentation/admin-guide/pm/intel-speed-select.rst
@@ -0,0 +1,917 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+Intel(R) Speed Select Technology User Guide
+============================================================
+
+The Intel(R) Speed Select Technology (Intel(R) SST) provides a powerful new
+collection of features that give more granular control over CPU performance.
+With Intel(R) SST, one server can be configured for power and performance for a
+variety of diverse workload requirements.
+
+Refer to the links below for an overview of the technology:
+
+- https://www.intel.com/content/www/us/en/architecture-and-technology/speed-select-technology-article.html
+- https://builders.intel.com/docs/networkbuilders/intel-speed-select-technology-base-frequency-enhancing-performance.pdf
+
+These capabilities are further enhanced in some of the newer generations of
+server platforms where these features can be enumerated and controlled
+dynamically without pre-configuring via BIOS setup options. This dynamic
+configuration is done via mailbox commands to the hardware. One way to enumerate
+and configure these features is by using the Intel Speed Select utility.
+
+This document explains how to use the Intel Speed Select tool to enumerate and
+control Intel(R) SST features. This document gives example commands and explains
+how these commands change the power and performance profile of the system under
+test. Using this tool as an example, customers can replicate the messaging
+implemented in the tool in their production software.
+
+intel-speed-select configuration tool
+======================================
+
+Most Linux distribution packages may include the "intel-speed-select" tool. If not,
+it can be built by downloading the Linux kernel tree from kernel.org. Once
+downloaded, the tool can be built without building the full kernel.
+
+From the kernel tree, run the following commands::
+
+# cd tools/power/x86/intel-speed-select/
+# make
+# make install
+
+Getting Help
+------------
+
+To get help with the tool, execute the command below::
+
+# intel-speed-select --help
+
+The top-level help describes arguments and features. Notice that there is a
+multi-level help structure in the tool. For example, to get help for the feature "perf-profile"::
+
+# intel-speed-select perf-profile --help
+
+To get help on a command, another level of help is provided. For example for the command info "info"::
+
+# intel-speed-select perf-profile info --help
+
+Summary of platform capability
+------------------------------
+To check the current platform and driver capaibilities, execute::
+
+#intel-speed-select --info
+
+For example on a test system::
+
+ # intel-speed-select --info
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Platform: API version : 1
+ Platform: Driver version : 1
+ Platform: mbox supported : 1
+ Platform: mmio supported : 1
+ Intel(R) SST-PP (feature perf-profile) is supported
+ TDP level change control is unlocked, max level: 4
+ Intel(R) SST-TF (feature turbo-freq) is supported
+ Intel(R) SST-BF (feature base-freq) is not supported
+ Intel(R) SST-CP (feature core-power) is supported
+
+Intel(R) Speed Select Technology - Performance Profile (Intel(R) SST-PP)
+------------------------------------------------------------------------
+
+This feature allows configuration of a server dynamically based on workload
+performance requirements. This helps users during deployment as they do not have
+to choose a specific server configuration statically. This Intel(R) Speed Select
+Technology - Performance Profile (Intel(R) SST-PP) feature introduces a mechanism
+that allows multiple optimized performance profiles per system. Each profile
+defines a set of CPUs that need to be online and rest offline to sustain a
+guaranteed base frequency. Once the user issues a command to use a specific
+performance profile and meet CPU online/offline requirement, the user can expect
+a change in the base frequency dynamically. This feature is called
+"perf-profile" when using the Intel Speed Select tool.
+
+Number or performance levels
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There can be multiple performance profiles on a system. To get the number of
+profiles, execute the command below::
+
+ # intel-speed-select perf-profile get-config-levels
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ get-config-levels:4
+ package-1
+ die-0
+ cpu-14
+ get-config-levels:4
+
+On this system under test, there are 4 performance profiles in addition to the
+base performance profile (which is performance level 0).
+
+Lock/Unlock status
+~~~~~~~~~~~~~~~~~~
+
+Even if there are multiple performance profiles, it is possible that they
+are locked. If they are locked, users cannot issue a command to change the
+performance state. It is possible that there is a BIOS setup to unlock or check
+with your system vendor.
+
+To check if the system is locked, execute the following command::
+
+ # intel-speed-select perf-profile get-lock-status
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ get-lock-status:0
+ package-1
+ die-0
+ cpu-14
+ get-lock-status:0
+
+In this case, lock status is 0, which means that the system is unlocked.
+
+Properties of a performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get properties of a specific performance level (For example for the level 0, below), execute the command below::
+
+ # intel-speed-select perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-0
+ cpu-count:28
+ enable-cpu-mask:000003ff,f0003fff
+ enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,28,29,30,31,32,33,34,35,36,37,38,39,40,41
+ thermal-design-power-ratio:26
+ base-frequency(MHz):2600
+ speed-select-turbo-freq:disabled
+ speed-select-base-freq:disabled
+ ...
+ ...
+
+Here -l option is used to specify a performance level.
+
+If the option -l is omitted, then this command will print information about all
+the performance levels. The above command is printing properties of the
+performance level 0.
+
+For this performance profile, the list of CPUs displayed by the
+"enable-cpu-mask/enable-cpu-list" at the max can be "online." When that
+condition is met, then base frequency of 2600 MHz can be maintained. To
+understand more, execute "intel-speed-select perf-profile info" for performance
+level 4::
+
+ # intel-speed-select perf-profile info -l 4
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-4
+ cpu-count:28
+ enable-cpu-mask:000000fa,f0000faf
+ enable-cpu-list:0,1,2,3,5,7,8,9,10,11,28,29,30,31,33,35,36,37,38,39
+ thermal-design-power-ratio:28
+ base-frequency(MHz):2800
+ speed-select-turbo-freq:disabled
+ speed-select-base-freq:unsupported
+ ...
+ ...
+
+There are fewer CPUs in the "enable-cpu-mask/enable-cpu-list". Consequently, if
+the user only keeps these CPUs online and the rest "offline," then the base
+frequency is increased to 2.8 GHz compared to 2.6 GHz at performance level 0.
+
+Get current performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the current performance level, execute::
+
+ # intel-speed-select perf-profile get-config-current-level
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ get-config-current_level:0
+
+First verify that the base_frequency displayed by the cpufreq sysfs is correct::
+
+ # cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency
+ 2600000
+
+This matches the base-frequency (MHz) field value displayed from the
+"perf-profile info" command for performance level 0(cpufreq frequency is in
+KHz).
+
+To check if the average frequency is equal to the base frequency for a 100% busy
+workload, disable turbo::
+
+# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
+
+Then runs a busy workload on all CPUs, for example::
+
+#stress -c 64
+
+To verify the base frequency, run turbostat::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+
+ Package Core CPU Bzy_MHz
+ - - 2600
+ 0 0 0 2600
+ 0 1 1 2600
+ 0 2 2 2600
+ 0 3 3 2600
+ 0 4 4 2600
+ . . . .
+
+
+Changing performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To the change the performance level to 4, execute::
+
+ # intel-speed-select -d perf-profile set-config-level -l 4 -o
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile
+ set_tdp_level:success
+
+In the command above, "-o" is optional. If it is specified, then it will also
+offline CPUs which are not present in the enable_cpu_mask for this performance
+level.
+
+Now if the base_frequency is checked::
+
+ #cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency
+ 2800000
+
+Which shows that the base frequency now increased from 2600 MHz at performance
+level 0 to 2800 MHz at performance level 4. As a result, any workload, which can
+use fewer CPUs, can see a boost of 200 MHz compared to performance level 0.
+
+Check presence of other Intel(R) SST features
+---------------------------------------------
+
+Each of the performance profiles also specifies weather there is support of
+other two Intel(R) SST features (Intel(R) Speed Select Technology - Base Frequency
+(Intel(R) SST-BF) and Intel(R) Speed Select Technology - Turbo Frequency (Intel
+SST-TF)).
+
+For example, from the output of "perf-profile info" above, for level 0 and level
+4:
+
+For level 0::
+ speed-select-turbo-freq:disabled
+ speed-select-base-freq:disabled
+
+For level 4::
+ speed-select-turbo-freq:disabled
+ speed-select-base-freq:unsupported
+
+Given these results, the "speed-select-base-freq" (Intel(R) SST-BF) in level 4
+changed from "disabled" to "unsupported" compared to performance level 0.
+
+This means that at performance level 4, the "speed-select-base-freq" feature is
+not supported. However, at performance level 0, this feature is "supported", but
+currently "disabled", meaning the user has not activated this feature. Whereas
+"speed-select-turbo-freq" (Intel(R) SST-TF) is supported at both performance
+levels, but currently not activated by the user.
+
+The Intel(R) SST-BF and the Intel(R) SST-TF features are built on a foundation
+technology called Intel(R) Speed Select Technology - Core Power (Intel(R) SST-CP).
+The platform firmware enables this feature when Intel(R) SST-BF or Intel(R) SST-TF
+is supported on a platform.
+
+Intel(R) Speed Select Technology Core Power (Intel(R) SST-CP)
+---------------------------------------------------------------
+
+Intel(R) Speed Select Technology Core Power (Intel(R) SST-CP) is an interface that
+allows users to define per core priority. This defines a mechanism to distribute
+power among cores when there is a power constrained scenario. This defines a
+class of service (CLOS) configuration.
+
+The user can configure up to 4 class of service configurations. Each CLOS group
+configuration allows definitions of parameters, which affects how the frequency
+can be limited and power is distributed. Each CPU core can be tied to a class of
+service and hence an associated priority. The granularity is at core level not
+at per CPU level.
+
+Enable CLOS based prioritization
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To use CLOS based prioritization feature, firmware must be informed to enable
+and use a priority type. There is a default per platform priority type, which
+can be changed with optional command line parameter.
+
+To enable and check the options, execute::
+
+ # intel-speed-select core-power enable --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Enable core-power for a package/die
+ Clos Enable: Specify priority type with [--priority|-p]
+ 0: Proportional, 1: Ordered
+
+There are two types of priority types:
+
+- Ordered
+
+Priority for ordered throttling is defined based on the index of the assigned
+CLOS group. Where CLOS0 gets highest priority (throttled last).
+
+Priority order is:
+CLOS0 > CLOS1 > CLOS2 > CLOS3.
+
+- Proportional
+
+When proportional priority is used, there is an additional parameter called
+frequency_weight, which can be specified per CLOS group. The goal of
+proportional priority is to provide each core with the requested min., then
+distribute all remaining (excess/deficit) budgets in proportion to a defined
+weight. This proportional priority can be configured using "core-power config"
+command.
+
+To enable with the platform default priority type, execute::
+
+ # intel-speed-select core-power enable
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ core-power
+ enable:success
+ package-1
+ die-0
+ cpu-6
+ core-power
+ enable:success
+
+The scope of this enable is per package or die scoped when a package contains
+multiple dies. To check if CLOS is enabled and get priority type, "core-power
+info" command can be used. For example to check the status of core-power feature
+on CPU 0, execute::
+
+ # intel-speed-select -c 0 core-power info
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ core-power
+ support-status:supported
+ enable-status:enabled
+ clos-enable-status:enabled
+ priority-type:proportional
+ package-1
+ die-0
+ cpu-24
+ core-power
+ support-status:supported
+ enable-status:enabled
+ clos-enable-status:enabled
+ priority-type:proportional
+
+Configuring CLOS groups
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Each CLOS group has its own attributes including min, max, freq_weight and
+desired. These parameters can be configured with "core-power config" command.
+Defaults will be used if user skips setting a parameter except clos id, which is
+mandatory. To check core-power config options, execute::
+
+ # intel-speed-select core-power config --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Set core-power configuration for one of the four clos ids
+ Specify targeted clos id with [--clos|-c]
+ Specify clos Proportional Priority [--weight|-w]
+ Specify clos min in MHz with [--min|-n]
+ Specify clos max in MHz with [--max|-m]
+
+For example::
+
+ # intel-speed-select core-power config -c 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ clos epp is not specified, default: 0
+ clos frequency weight is not specified, default: 0
+ clos min is not specified, default: 0 MHz
+ clos max is not specified, default: 25500 MHz
+ clos desired is not specified, default: 0
+ package-0
+ die-0
+ cpu-0
+ core-power
+ config:success
+ package-1
+ die-0
+ cpu-6
+ core-power
+ config:success
+
+The user has the option to change defaults. For example, the user can change the
+"min" and set the base frequency to always get guaranteed base frequency.
+
+Get the current CLOS configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To check the current configuration, "core-power get-config" can be used. For
+example, to get the configuration of CLOS 0::
+
+ # intel-speed-select core-power get-config -c 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ core-power
+ clos:0
+ epp:0
+ clos-proportional-priority:0
+ clos-min:0 MHz
+ clos-max:Max Turbo frequency
+ clos-desired:0 MHz
+ package-1
+ die-0
+ cpu-24
+ core-power
+ clos:0
+ epp:0
+ clos-proportional-priority:0
+ clos-min:0 MHz
+ clos-max:Max Turbo frequency
+ clos-desired:0 MHz
+
+Associating a CPU with a CLOS group
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To associate a CPU to a CLOS group "core-power assoc" command can be used::
+
+ # intel-speed-select core-power assoc --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Associate a clos id to a CPU
+ Specify targeted clos id with [--clos|-c]
+
+
+For example to associate CPU 10 to CLOS group 3, execute::
+
+ # intel-speed-select -c 10 core-power assoc -c 3
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-10
+ core-power
+ assoc:success
+
+Once a CPU is associated, its sibling CPUs are also associated to a CLOS group.
+Once associated, avoid changing Linux "cpufreq" subsystem scaling frequency
+limits.
+
+To check the existing association for a CPU, "core-power get-assoc" command can
+be used. For example, to get association of CPU 10, execute::
+
+ # intel-speed-select -c 10 core-power get-assoc
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-1
+ die-0
+ cpu-10
+ get-assoc
+ clos:3
+
+This shows that CPU 10 is part of a CLOS group 3.
+
+
+Disable CLOS based prioritization
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To disable, execute::
+
+# intel-speed-select core-power disable
+
+Some features like Intel(R) SST-TF can only be enabled when CLOS based prioritization
+is enabled. For this reason, disabling while Intel(R) SST-TF is enabled can cause
+Intel(R) SST-TF to fail. This will cause the "disable" command to display an error
+if Intel(R) SST-TF is already enabled. In turn, to disable, the Intel(R) SST-TF
+feature must be disabled first.
+
+Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF)
+-------------------------------------------------------------------
+
+The Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF) feature lets
+the user control base frequency. If some critical workload threads demand
+constant high guaranteed performance, then this feature can be used to execute
+the thread at higher base frequency on specific sets of CPUs (high priority
+CPUs) at the cost of lower base frequency (low priority CPUs) on other CPUs.
+This feature does not require offline of the low priority CPUs.
+
+The support of Intel(R) SST-BF depends on the Intel(R) Speed Select Technology -
+Performance Profile (Intel(R) SST-PP) performance level configuration. It is
+possible that only certain performance levels support Intel(R) SST-BF. It is also
+possible that only base performance level (level = 0) has support of Intel
+SST-BF. Consequently, first select the desired performance level to enable this
+feature.
+
+In the system under test here, Intel(R) SST-BF is supported at the base
+performance level 0, but currently disabled. For example for the level 0::
+
+ # intel-speed-select -c 0 perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-0
+ ...
+
+ speed-select-base-freq:disabled
+ ...
+
+Before enabling Intel(R) SST-BF and measuring its impact on a workload
+performance, execute some workload and measure performance and get a baseline
+performance to compare against.
+
+Here the user wants more guaranteed performance. For this reason, it is likely
+that turbo is disabled. To disable turbo, execute::
+
+#echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
+
+Based on the output of the "intel-speed-select perf-profile info -l 0" base
+frequency of guaranteed frequency 2600 MHz.
+
+
+Measure baseline performance for comparison
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To compare, pick a multi-threaded workload where each thread can be scheduled on
+separate CPUs. "Hackbench pipe" test is a good example on how to improve
+performance using Intel(R) SST-BF.
+
+Below, the workload is measuring average scheduler wakeup latency, so a lower
+number means better performance::
+
+ # taskset -c 3,4 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+ Total time: 6.102 [sec]
+ 6.102445 usecs/op
+ 163868 ops/sec
+
+While running the above test, if we take turbostat output, it will show us that
+2 of the CPUs are busy and reaching max. frequency (which would be the base
+frequency as the turbo is disabled). The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package Core CPU Bzy_MHz
+ 0 0 0 1000
+ 0 1 1 1005
+ 0 2 2 1000
+ 0 3 3 2600
+ 0 4 4 2600
+ 0 5 5 1000
+ 0 6 6 1000
+ 0 7 7 1005
+ 0 8 8 1005
+ 0 9 9 1000
+ 0 10 10 1000
+ 0 11 11 995
+ 0 12 12 1000
+ 0 13 13 1000
+
+From the above turbostat output, both CPU 3 and 4 are very busy and reaching
+full guaranteed frequency of 2600 MHz.
+
+Intel(R) SST-BF Capabilities
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get capabilities of Intel(R) SST-BF for the current performance level 0,
+execute::
+
+ # intel-speed-select base-freq info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ speed-select-base-freq
+ high-priority-base-frequency(MHz):3000
+ high-priority-cpu-mask:00000216,00002160
+ high-priority-cpu-list:5,6,8,13,33,34,36,41
+ low-priority-base-frequency(MHz):2400
+ tjunction-temperature(C):125
+ thermal-design-power(W):205
+
+The above capabilities show that there are some CPUs on this system that can
+offer base frequency of 3000 MHz compared to the standard base frequency at this
+performance levels. Nevertheless, these CPUs are fixed, and they are presented
+via high-priority-cpu-list/high-priority-cpu-mask. But if this Intel(R) SST-BF
+feature is selected, the low priorities CPUs (which are not in
+high-priority-cpu-list) can only offer up to 2400 MHz. As a result, if this
+clipping of low priority CPUs is acceptable, then the user can enable Intel
+SST-BF feature particularly for the above "sched pipe" workload since only two
+CPUs are used, they can be scheduled on high priority CPUs and can get boost of
+400 MHz.
+
+Enable Intel(R) SST-BF
+~~~~~~~~~~~~~~~~~~~~~~
+
+To enable Intel(R) SST-BF feature, execute::
+
+ # intel-speed-select base-freq enable -a
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ base-freq
+ enable:success
+ package-1
+ die-0
+ cpu-14
+ base-freq
+ enable:success
+
+In this case, -a option is optional. This not only enables Intel(R) SST-BF, but it
+also adjusts the priority of cores using Intel(R) Speed Select Technology Core
+Power (Intel(R) SST-CP) features. This option sets the minimum performance of each
+Intel(R) Speed Select Technology - Performance Profile (Intel(R) SST-PP) class to
+maximum performance so that the hardware will give maximum performance possible
+for each CPU.
+
+If -a option is not used, then the following steps are required before enabling
+Intel(R) SST-BF:
+
+- Discover Intel(R) SST-BF and note low and high priority base frequency
+- Note the high prioity CPU list
+- Enable CLOS using core-power feature set
+- Configure CLOS parameters. Use CLOS.min to set to minimum performance
+- Subscribe desired CPUs to CLOS groups
+
+With this configuration, if the same workload is executed by pinning the
+workload to high priority CPUs (CPU 5 and 6 in this case)::
+
+ #taskset -c 5,6 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+ Total time: 5.627 [sec]
+ 5.627922 usecs/op
+ 177685 ops/sec
+
+This way, by enabling Intel(R) SST-BF, the performance of this benchmark is
+improved (latency reduced) by 7.79%. From the turbostat output, it can be
+observed that the high priority CPUs reached 3000 MHz compared to 2600 MHz.
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package Core CPU Bzy_MHz
+ 0 0 0 2151
+ 0 1 1 2166
+ 0 2 2 2175
+ 0 3 3 2175
+ 0 4 4 2175
+ 0 5 5 3000
+ 0 6 6 3000
+ 0 7 7 2180
+ 0 8 8 2662
+ 0 9 9 2176
+ 0 10 10 2175
+ 0 11 11 2176
+ 0 12 12 2176
+ 0 13 13 2661
+
+Disable Intel(R) SST-BF
+~~~~~~~~~~~~~~~~~~~~~~~
+
+To disable the Intel(R) SST-BF feature, execute::
+
+# intel-speed-select base-freq disable -a
+
+
+Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
+--------------------------------------------------------------------
+
+This feature enables the ability to set different "All core turbo ratio limits"
+to cores based on the priority. By using this feature, some cores can be
+configured to get higher turbo frequency by designating them as high priority at
+the cost of lower or no turbo frequency on the low priority cores.
+
+For this reason, this feature is only useful when system is busy utilizing all
+CPUs, but the user wants some configurable option to get high performance on
+some CPUs.
+
+The support of Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
+depends on the Intel(R) Speed Select Technology - Performance Profile (Intel
+SST-PP) performance level configuration. It is possible that only a certain
+performance level supports Intel(R) SST-TF. It is also possible that only the base
+performance level (level = 0) has the support of Intel(R) SST-TF. Hence, first
+select the desired performance level to enable this feature.
+
+In the system under test here, Intel(R) SST-TF is supported at the base
+performance level 0, but currently disabled::
+
+ # intel-speed-select -c 0 perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-0
+ ...
+ ...
+ speed-select-turbo-freq:disabled
+ ...
+ ...
+
+
+To check if performance can be improved using Intel(R) SST-TF feature, get the turbo
+frequency properties with Intel(R) SST-TF enabled and compare to the base turbo
+capability of this system.
+
+Get Base turbo capability
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the base turbo capability of performance level 0, execute::
+
+ # intel-speed-select perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ perf-profile-level-0
+ ...
+ ...
+ turbo-ratio-limits-sse
+ bucket-0
+ core-count:2
+ max-turbo-frequency(MHz):3200
+ bucket-1
+ core-count:4
+ max-turbo-frequency(MHz):3100
+ bucket-2
+ core-count:6
+ max-turbo-frequency(MHz):3100
+ bucket-3
+ core-count:8
+ max-turbo-frequency(MHz):3100
+ bucket-4
+ core-count:10
+ max-turbo-frequency(MHz):3100
+ bucket-5
+ core-count:12
+ max-turbo-frequency(MHz):3100
+ bucket-6
+ core-count:14
+ max-turbo-frequency(MHz):3100
+ bucket-7
+ core-count:16
+ max-turbo-frequency(MHz):3100
+
+Based on the data above, when all the CPUS are busy, the max. frequency of 3100
+MHz can be achieved. If there is some busy workload on cpu 0 - 11 (e.g. stress)
+and on CPU 12 and 13, execute "hackbench pipe" workload::
+
+ # taskset -c 12,13 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+ Total time: 5.705 [sec]
+ 5.705488 usecs/op
+ 175269 ops/sec
+
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package Core CPU Bzy_MHz
+ 0 0 0 3000
+ 0 1 1 3000
+ 0 2 2 3000
+ 0 3 3 3000
+ 0 4 4 3000
+ 0 5 5 3100
+ 0 6 6 3100
+ 0 7 7 3000
+ 0 8 8 3100
+ 0 9 9 3000
+ 0 10 10 3000
+ 0 11 11 3000
+ 0 12 12 3100
+ 0 13 13 3100
+
+Based on turbostat output, the performance is limited by frequency cap of 3100
+MHz. To check if the hackbench performance can be improved for CPU 12 and CPU
+13, first check the capability of the Intel(R) SST-TF feature for this performance
+level.
+
+Get Intel(R) SST-TF Capability
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the capability, the "turbo-freq info" command can be used::
+
+ # intel-speed-select turbo-freq info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-0
+ speed-select-turbo-freq
+ bucket-0
+ high-priority-cores-count:2
+ high-priority-max-frequency(MHz):3200
+ high-priority-max-avx2-frequency(MHz):3200
+ high-priority-max-avx512-frequency(MHz):3100
+ bucket-1
+ high-priority-cores-count:4
+ high-priority-max-frequency(MHz):3100
+ high-priority-max-avx2-frequency(MHz):3000
+ high-priority-max-avx512-frequency(MHz):2900
+ bucket-2
+ high-priority-cores-count:6
+ high-priority-max-frequency(MHz):3100
+ high-priority-max-avx2-frequency(MHz):3000
+ high-priority-max-avx512-frequency(MHz):2900
+ speed-select-turbo-freq-clip-frequencies
+ low-priority-max-frequency(MHz):2600
+ low-priority-max-avx2-frequency(MHz):2400
+ low-priority-max-avx512-frequency(MHz):2100
+
+Based on the output above, there is an Intel(R) SST-TF bucket for which there are
+two high priority cores. If only two high priority cores are set, then max.
+turbo frequency on those cores can be increased to 3200 MHz. This is 100 MHz
+more than the base turbo capability for all cores.
+
+In turn, for the hackbench workload, two CPUs can be set as high priority and
+rest as low priority. One side effect is that once enabled, the low priority
+cores will be clipped to a lower frequency of 2600 MHz.
+
+Enable Intel(R) SST-TF
+~~~~~~~~~~~~~~~~~~~~~~
+
+To enable Intel(R) SST-TF, execute::
+
+ # intel-speed-select -c 12,13 turbo-freq enable -a
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+ die-0
+ cpu-12
+ turbo-freq
+ enable:success
+ package-0
+ die-0
+ cpu-13
+ turbo-freq
+ enable:success
+ package--1
+ die-0
+ cpu-63
+ turbo-freq --auto
+ enable:success
+
+In this case, the option "-a" is optional. If set, it enables Intel(R) SST-TF
+feature and also sets the CPUs to high and low priority using Intel Speed
+Select Technology Core Power (Intel(R) SST-CP) features. The CPU numbers passed
+with "-c" arguments are marked as high priority, including its siblings.
+
+If -a option is not used, then the following steps are required before enabling
+Intel(R) SST-TF:
+
+- Discover Intel(R) SST-TF and note buckets of high priority cores and maximum frequency
+
+- Enable CLOS using core-power feature set - Configure CLOS parameters
+
+- Subscribe desired CPUs to CLOS groups making sure that high priority cores are set to the maximum frequency
+
+If the same hackbench workload is executed, schedule hackbench threads on high
+priority CPUs::
+
+ #taskset -c 12,13 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+ Total time: 5.510 [sec]
+ 5.510165 usecs/op
+ 180826 ops/sec
+
+This improved performance by around 3.3% improvement on a busy system. Here the
+turbostat output will show that the CPU 12 and CPU 13 are getting 100 MHz boost.
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package Core CPU Bzy_MHz
+ ...
+ 0 12 12 3200
+ 0 13 13 3200
diff --git a/Documentation/admin-guide/pm/intel_epb.rst b/Documentation/admin-guide/pm/intel_epb.rst
new file mode 100644
index 000000000..005121167
--- /dev/null
+++ b/Documentation/admin-guide/pm/intel_epb.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+======================================
+Intel Performance and Energy Bias Hint
+======================================
+
+:Copyright: |copy| 2019 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+.. kernel-doc:: arch/x86/kernel/cpu/intel_epb.c
+ :doc: overview
+
+Intel Performance and Energy Bias Attribute in ``sysfs``
+========================================================
+
+The Intel Performance and Energy Bias Hint (EPB) value for a given (logical) CPU
+can be checked or updated through a ``sysfs`` attribute (file) under
+:file:`/sys/devices/system/cpu/cpu<N>/power/`, where the CPU number ``<N>``
+is allocated at the system initialization time:
+
+``energy_perf_bias``
+ Shows the current EPB value for the CPU in a sliding scale 0 - 15, where
+ a value of 0 corresponds to a hint preference for highest performance
+ and a value of 15 corresponds to the maximum energy savings.
+
+ In order to update the EPB value for the CPU, this attribute can be
+ written to, either with a number in the 0 - 15 sliding scale above, or
+ with one of the strings: "performance", "balance-performance", "normal",
+ "balance-power", "power" that represent values reflected by their
+ meaning.
+
+ This attribute is present for all online CPUs supporting the EPB
+ feature.
+
+Note that while the EPB interface to the processor is defined at the logical CPU
+level, the physical register backing it may be shared by multiple CPUs (for
+example, SMT siblings or cores in one package). For this reason, updating the
+EPB value for one CPU may cause the EPB values for other CPUs to change.
diff --git a/Documentation/admin-guide/pm/intel_idle.rst b/Documentation/admin-guide/pm/intel_idle.rst
new file mode 100644
index 000000000..89309e1b0
--- /dev/null
+++ b/Documentation/admin-guide/pm/intel_idle.rst
@@ -0,0 +1,268 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+==============================================
+``intel_idle`` CPU Idle Time Management Driver
+==============================================
+
+:Copyright: |copy| 2020 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+General Information
+===================
+
+``intel_idle`` is a part of the
+:doc:`CPU idle time management subsystem <cpuidle>` in the Linux kernel
+(``CPUIdle``). It is the default CPU idle time management driver for the
+Nehalem and later generations of Intel processors, but the level of support for
+a particular processor model in it depends on whether or not it recognizes that
+processor model and may also depend on information coming from the platform
+firmware. [To understand ``intel_idle`` it is necessary to know how ``CPUIdle``
+works in general, so this is the time to get familiar with :doc:`cpuidle` if you
+have not done that yet.]
+
+``intel_idle`` uses the ``MWAIT`` instruction to inform the processor that the
+logical CPU executing it is idle and so it may be possible to put some of the
+processor's functional blocks into low-power states. That instruction takes two
+arguments (passed in the ``EAX`` and ``ECX`` registers of the target CPU), the
+first of which, referred to as a *hint*, can be used by the processor to
+determine what can be done (for details refer to Intel Software Developer’s
+Manual [1]_). Accordingly, ``intel_idle`` refuses to work with processors in
+which the support for the ``MWAIT`` instruction has been disabled (for example,
+via the platform firmware configuration menu) or which do not support that
+instruction at all.
+
+``intel_idle`` is not modular, so it cannot be unloaded, which means that the
+only way to pass early-configuration-time parameters to it is via the kernel
+command line.
+
+
+.. _intel-idle-enumeration-of-states:
+
+Enumeration of Idle States
+==========================
+
+Each ``MWAIT`` hint value is interpreted by the processor as a license to
+reconfigure itself in a certain way in order to save energy. The processor
+configurations (with reduced power draw) resulting from that are referred to
+as C-states (in the ACPI terminology) or idle states. The list of meaningful
+``MWAIT`` hint values and idle states (i.e. low-power configurations of the
+processor) corresponding to them depends on the processor model and it may also
+depend on the configuration of the platform.
+
+In order to create a list of available idle states required by the ``CPUIdle``
+subsystem (see :ref:`idle-states-representation` in :doc:`cpuidle`),
+``intel_idle`` can use two sources of information: static tables of idle states
+for different processor models included in the driver itself and the ACPI tables
+of the system. The former are always used if the processor model at hand is
+recognized by ``intel_idle`` and the latter are used if that is required for
+the given processor model (which is the case for all server processor models
+recognized by ``intel_idle``) or if the processor model is not recognized.
+[There is a module parameter that can be used to make the driver use the ACPI
+tables with any processor model recognized by it; see
+`below <intel-idle-parameters_>`_.]
+
+If the ACPI tables are going to be used for building the list of available idle
+states, ``intel_idle`` first looks for a ``_CST`` object under one of the ACPI
+objects corresponding to the CPUs in the system (refer to the ACPI specification
+[2]_ for the description of ``_CST`` and its output package). Because the
+``CPUIdle`` subsystem expects that the list of idle states supplied by the
+driver will be suitable for all of the CPUs handled by it and ``intel_idle`` is
+registered as the ``CPUIdle`` driver for all of the CPUs in the system, the
+driver looks for the first ``_CST`` object returning at least one valid idle
+state description and such that all of the idle states included in its return
+package are of the FFH (Functional Fixed Hardware) type, which means that the
+``MWAIT`` instruction is expected to be used to tell the processor that it can
+enter one of them. The return package of that ``_CST`` is then assumed to be
+applicable to all of the other CPUs in the system and the idle state
+descriptions extracted from it are stored in a preliminary list of idle states
+coming from the ACPI tables. [This step is skipped if ``intel_idle`` is
+configured to ignore the ACPI tables; see `below <intel-idle-parameters_>`_.]
+
+Next, the first (index 0) entry in the list of available idle states is
+initialized to represent a "polling idle state" (a pseudo-idle state in which
+the target CPU continuously fetches and executes instructions), and the
+subsequent (real) idle state entries are populated as follows.
+
+If the processor model at hand is recognized by ``intel_idle``, there is a
+(static) table of idle state descriptions for it in the driver. In that case,
+the "internal" table is the primary source of information on idle states and the
+information from it is copied to the final list of available idle states. If
+using the ACPI tables for the enumeration of idle states is not required
+(depending on the processor model), all of the listed idle state are enabled by
+default (so all of them will be taken into consideration by ``CPUIdle``
+governors during CPU idle state selection). Otherwise, some of the listed idle
+states may not be enabled by default if there are no matching entries in the
+preliminary list of idle states coming from the ACPI tables. In that case user
+space still can enable them later (on a per-CPU basis) with the help of
+the ``disable`` idle state attribute in ``sysfs`` (see
+:ref:`idle-states-representation` in :doc:`cpuidle`). This basically means that
+the idle states "known" to the driver may not be enabled by default if they have
+not been exposed by the platform firmware (through the ACPI tables).
+
+If the given processor model is not recognized by ``intel_idle``, but it
+supports ``MWAIT``, the preliminary list of idle states coming from the ACPI
+tables is used for building the final list that will be supplied to the
+``CPUIdle`` core during driver registration. For each idle state in that list,
+the description, ``MWAIT`` hint and exit latency are copied to the corresponding
+entry in the final list of idle states. The name of the idle state represented
+by it (to be returned by the ``name`` idle state attribute in ``sysfs``) is
+"CX_ACPI", where X is the index of that idle state in the final list (note that
+the minimum value of X is 1, because 0 is reserved for the "polling" state), and
+its target residency is based on the exit latency value. Specifically, for
+C1-type idle states the exit latency value is also used as the target residency
+(for compatibility with the majority of the "internal" tables of idle states for
+various processor models recognized by ``intel_idle``) and for the other idle
+state types (C2 and C3) the target residency value is 3 times the exit latency
+(again, that is because it reflects the target residency to exit latency ratio
+in the majority of cases for the processor models recognized by ``intel_idle``).
+All of the idle states in the final list are enabled by default in this case.
+
+
+.. _intel-idle-initialization:
+
+Initialization
+==============
+
+The initialization of ``intel_idle`` starts with checking if the kernel command
+line options forbid the use of the ``MWAIT`` instruction. If that is the case,
+an error code is returned right away.
+
+The next step is to check whether or not the processor model is known to the
+driver, which determines the idle states enumeration method (see
+`above <intel-idle-enumeration-of-states_>`_), and whether or not the processor
+supports ``MWAIT`` (the initialization fails if that is not the case). Then,
+the ``MWAIT`` support in the processor is enumerated through ``CPUID`` and the
+driver initialization fails if the level of support is not as expected (for
+example, if the total number of ``MWAIT`` substates returned is 0).
+
+Next, if the driver is not configured to ignore the ACPI tables (see
+`below <intel-idle-parameters_>`_), the idle states information provided by the
+platform firmware is extracted from them.
+
+Then, ``CPUIdle`` device objects are allocated for all CPUs and the list of
+available idle states is created as explained
+`above <intel-idle-enumeration-of-states_>`_.
+
+Finally, ``intel_idle`` is registered with the help of cpuidle_register_driver()
+as the ``CPUIdle`` driver for all CPUs in the system and a CPU online callback
+for configuring individual CPUs is registered via cpuhp_setup_state(), which
+(among other things) causes the callback routine to be invoked for all of the
+CPUs present in the system at that time (each CPU executes its own instance of
+the callback routine). That routine registers a ``CPUIdle`` device for the CPU
+running it (which enables the ``CPUIdle`` subsystem to operate that CPU) and
+optionally performs some CPU-specific initialization actions that may be
+required for the given processor model.
+
+
+.. _intel-idle-parameters:
+
+Kernel Command Line Options and Module Parameters
+=================================================
+
+The *x86* architecture support code recognizes three kernel command line
+options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
+and ``idle=nomwait``. If any of them is present in the kernel command line, the
+``MWAIT`` instruction is not allowed to be used, so the initialization of
+``intel_idle`` will fail.
+
+Apart from that there are four module parameters recognized by ``intel_idle``
+itself that can be set via the kernel command line (they cannot be updated via
+sysfs, so that is the only way to change their values).
+
+The ``max_cstate`` parameter value is the maximum idle state index in the list
+of idle states supplied to the ``CPUIdle`` core during the registration of the
+driver. It is also the maximum number of regular (non-polling) idle states that
+can be used by ``intel_idle``, so the enumeration of idle states is terminated
+after finding that number of usable idle states (the other idle states that
+potentially might have been used if ``max_cstate`` had been greater are not
+taken into consideration at all). Setting ``max_cstate`` can prevent
+``intel_idle`` from exposing idle states that are regarded as "too deep" for
+some reason to the ``CPUIdle`` core, but it does so by making them effectively
+invisible until the system is shut down and started again which may not always
+be desirable. In practice, it is only really necessary to do that if the idle
+states in question cannot be enabled during system startup, because in the
+working state of the system the CPU power management quality of service (PM
+QoS) feature can be used to prevent ``CPUIdle`` from touching those idle states
+even if they have been enumerated (see :ref:`cpu-pm-qos` in :doc:`cpuidle`).
+Setting ``max_cstate`` to 0 causes the ``intel_idle`` initialization to fail.
+
+The ``no_acpi`` and ``use_acpi`` module parameters (recognized by ``intel_idle``
+if the kernel has been configured with ACPI support) can be set to make the
+driver ignore the system's ACPI tables entirely or use them for all of the
+recognized processor models, respectively (they both are unset by default and
+``use_acpi`` has no effect if ``no_acpi`` is set).
+
+The value of the ``states_off`` module parameter (0 by default) represents a
+list of idle states to be disabled by default in the form of a bitmask.
+
+Namely, the positions of the bits that are set in the ``states_off`` value are
+the indices of idle states to be disabled by default (as reflected by the names
+of the corresponding idle state directories in ``sysfs``, :file:`state0`,
+:file:`state1` ... :file:`state<i>` ..., where ``<i>`` is the index of the given
+idle state; see :ref:`idle-states-representation` in :doc:`cpuidle`).
+
+For example, if ``states_off`` is equal to 3, the driver will disable idle
+states 0 and 1 by default, and if it is equal to 8, idle state 3 will be
+disabled by default and so on (bit positions beyond the maximum idle state index
+are ignored).
+
+The idle states disabled this way can be enabled (on a per-CPU basis) from user
+space via ``sysfs``.
+
+
+.. _intel-idle-core-and-package-idle-states:
+
+Core and Package Levels of Idle States
+======================================
+
+Typically, in a processor supporting the ``MWAIT`` instruction there are (at
+least) two levels of idle states (or C-states). One level, referred to as
+"core C-states", covers individual cores in the processor, whereas the other
+level, referred to as "package C-states", covers the entire processor package
+and it may also involve other components of the system (GPUs, memory
+controllers, I/O hubs etc.).
+
+Some of the ``MWAIT`` hint values allow the processor to use core C-states only
+(most importantly, that is the case for the ``MWAIT`` hint value corresponding
+to the ``C1`` idle state), but the majority of them give it a license to put
+the target core (i.e. the core containing the logical CPU executing ``MWAIT``
+with the given hint value) into a specific core C-state and then (if possible)
+to enter a specific package C-state at the deeper level. For example, the
+``MWAIT`` hint value representing the ``C3`` idle state allows the processor to
+put the target core into the low-power state referred to as "core ``C3``" (or
+``CC3``), which happens if all of the logical CPUs (SMT siblings) in that core
+have executed ``MWAIT`` with the ``C3`` hint value (or with a hint value
+representing a deeper idle state), and in addition to that (in the majority of
+cases) it gives the processor a license to put the entire package (possibly
+including some non-CPU components such as a GPU or a memory controller) into the
+low-power state referred to as "package ``C3``" (or ``PC3``), which happens if
+all of the cores have gone into the ``CC3`` state and (possibly) some additional
+conditions are satisfied (for instance, if the GPU is covered by ``PC3``, it may
+be required to be in a certain GPU-specific low-power state for ``PC3`` to be
+reachable).
+
+As a rule, there is no simple way to make the processor use core C-states only
+if the conditions for entering the corresponding package C-states are met, so
+the logical CPU executing ``MWAIT`` with a hint value that is not core-level
+only (like for ``C1``) must always assume that this may cause the processor to
+enter a package C-state. [That is why the exit latency and target residency
+values corresponding to the majority of ``MWAIT`` hint values in the "internal"
+tables of idle states in ``intel_idle`` reflect the properties of package
+C-states.] If using package C-states is not desirable at all, either
+:ref:`PM QoS <cpu-pm-qos>` or the ``max_cstate`` module parameter of
+``intel_idle`` described `above <intel-idle-parameters_>`_ must be used to
+restrict the range of permissible idle states to the ones with core-level only
+``MWAIT`` hint values (like ``C1``).
+
+
+References
+==========
+
+.. [1] *Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 2B*,
+ https://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-vol-2b-manual.html
+
+.. [2] *Advanced Configuration and Power Interface (ACPI) Specification*,
+ https://uefi.org/specifications
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
new file mode 100644
index 000000000..5072e7064
--- /dev/null
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -0,0 +1,763 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===============================================
+``intel_pstate`` CPU Performance Scaling Driver
+===============================================
+
+:Copyright: |copy| 2017 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+General Information
+===================
+
+``intel_pstate`` is a part of the
+:doc:`CPU performance scaling subsystem <cpufreq>` in the Linux kernel
+(``CPUFreq``). It is a scaling driver for the Sandy Bridge and later
+generations of Intel processors. Note, however, that some of those processors
+may not be supported. [To understand ``intel_pstate`` it is necessary to know
+how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if
+you have not done that yet.]
+
+For the processors supported by ``intel_pstate``, the P-state concept is broader
+than just an operating frequency or an operating performance point (see the
+LinuxCon Europe 2015 presentation by Kristen Accardi [1]_ for more
+information about that). For this reason, the representation of P-states used
+by ``intel_pstate`` internally follows the hardware specification (for details
+refer to Intel Software Developer’s Manual [2]_). However, the ``CPUFreq`` core
+uses frequencies for identifying operating performance points of CPUs and
+frequencies are involved in the user space interface exposed by it, so
+``intel_pstate`` maps its internal representation of P-states to frequencies too
+(fortunately, that mapping is unambiguous). At the same time, it would not be
+practical for ``intel_pstate`` to supply the ``CPUFreq`` core with a table of
+available frequencies due to the possible size of it, so the driver does not do
+that. Some functionality of the core is limited by that.
+
+Since the hardware P-state selection interface used by ``intel_pstate`` is
+available at the logical CPU level, the driver always works with individual
+CPUs. Consequently, if ``intel_pstate`` is in use, every ``CPUFreq`` policy
+object corresponds to one logical CPU and ``CPUFreq`` policies are effectively
+equivalent to CPUs. In particular, this means that they become "inactive" every
+time the corresponding CPU is taken offline and need to be re-initialized when
+it goes back online.
+
+``intel_pstate`` is not modular, so it cannot be unloaded, which means that the
+only way to pass early-configuration-time parameters to it is via the kernel
+command line. However, its configuration can be adjusted via ``sysfs`` to a
+great extent. In some configurations it even is possible to unregister it via
+``sysfs`` which allows another ``CPUFreq`` scaling driver to be loaded and
+registered (see `below <status_attr_>`_).
+
+
+Operation Modes
+===============
+
+``intel_pstate`` can operate in two different modes, active or passive. In the
+active mode, it uses its own internal performance scaling governor algorithm or
+allows the hardware to do preformance scaling by itself, while in the passive
+mode it responds to requests made by a generic ``CPUFreq`` governor implementing
+a certain performance scaling algorithm. Which of them will be in effect
+depends on what kernel command line options are used and on the capabilities of
+the processor.
+
+Active Mode
+-----------
+
+This is the default operation mode of ``intel_pstate`` for processors with
+hardware-managed P-states (HWP) support. If it works in this mode, the
+``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies
+contains the string "intel_pstate".
+
+In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
+provides its own scaling algorithms for P-state selection. Those algorithms
+can be applied to ``CPUFreq`` policies in the same way as generic scaling
+governors (that is, through the ``scaling_governor`` policy attribute in
+``sysfs``). [Note that different P-state selection algorithms may be chosen for
+different policies, but that is not recommended.]
+
+They are not generic scaling governors, but their names are the same as the
+names of some of those governors. Moreover, confusingly enough, they generally
+do not work in the same way as the generic governors they share the names with.
+For example, the ``powersave`` P-state selection algorithm provided by
+``intel_pstate`` is not a counterpart of the generic ``powersave`` governor
+(roughly, it corresponds to the ``schedutil`` and ``ondemand`` governors).
+
+There are two P-state selection algorithms provided by ``intel_pstate`` in the
+active mode: ``powersave`` and ``performance``. The way they both operate
+depends on whether or not the hardware-managed P-states (HWP) feature has been
+enabled in the processor and possibly on the processor model.
+
+Which of the P-state selection algorithms is used by default depends on the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option.
+Namely, if that option is set, the ``performance`` algorithm will be used by
+default, and the other one will be used by default if it is not set.
+
+Active Mode With HWP
+~~~~~~~~~~~~~~~~~~~~
+
+If the processor supports the HWP feature, it will be enabled during the
+processor initialization and cannot be disabled after that. It is possible
+to avoid enabling it by passing the ``intel_pstate=no_hwp`` argument to the
+kernel in the command line.
+
+If the HWP feature has been enabled, ``intel_pstate`` relies on the processor to
+select P-states by itself, but still it can give hints to the processor's
+internal P-state selection logic. What those hints are depends on which P-state
+selection algorithm has been applied to the given policy (or to the CPU it
+corresponds to).
+
+Even though the P-state selection is carried out by the processor automatically,
+``intel_pstate`` registers utilization update callbacks with the CPU scheduler
+in this mode. However, they are not used for running a P-state selection
+algorithm, but for periodic updates of the current CPU frequency information to
+be made available from the ``scaling_cur_freq`` policy attribute in ``sysfs``.
+
+HWP + ``performance``
+.....................
+
+In this configuration ``intel_pstate`` will write 0 to the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
+internal P-state selection logic is expected to focus entirely on performance.
+
+This will override the EPP/EPB setting coming from the ``sysfs`` interface
+(see `Energy vs Performance Hints`_ below). Moreover, any attempts to change
+the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this
+configuration will be rejected.
+
+Also, in this configuration the range of P-states available to the processor's
+internal P-state selection logic is always restricted to the upper boundary
+(that is, the maximum P-state that the driver is allowed to use).
+
+HWP + ``powersave``
+...................
+
+In this configuration ``intel_pstate`` will set the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob (otherwise) to whatever value it was
+previously set to via ``sysfs`` (or whatever default value it was
+set to by the platform firmware). This usually causes the processor's
+internal P-state selection logic to be less performance-focused.
+
+Active Mode Without HWP
+~~~~~~~~~~~~~~~~~~~~~~~
+
+This operation mode is optional for processors that do not support the HWP
+feature or when the ``intel_pstate=no_hwp`` argument is passed to the kernel in
+the command line. The active mode is used in those cases if the
+``intel_pstate=active`` argument is passed to the kernel in the command line.
+In this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it. [Note that ``intel_pstate`` will never refuse to work with
+any processor with the HWP feature enabled.]
+
+In this mode ``intel_pstate`` registers utilization update callbacks with the
+CPU scheduler in order to run a P-state selection algorithm, either
+``powersave`` or ``performance``, depending on the ``scaling_governor`` policy
+setting in ``sysfs``. The current CPU frequency information to be made
+available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
+periodically updated by those utilization update callbacks too.
+
+``performance``
+...............
+
+Without HWP, this P-state selection algorithm is always the same regardless of
+the processor model and platform configuration.
+
+It selects the maximum P-state it is allowed to use, subject to limits set via
+``sysfs``, every time the driver configuration for the given CPU is updated
+(e.g. via ``sysfs``).
+
+This is the default P-state selection algorithm if the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
+is set.
+
+``powersave``
+.............
+
+Without HWP, this P-state selection algorithm is similar to the algorithm
+implemented by the generic ``schedutil`` scaling governor except that the
+utilization metric used by it is based on numbers coming from feedback
+registers of the CPU. It generally selects P-states proportional to the
+current CPU utilization.
+
+This algorithm is run by the driver's utilization update callback for the
+given CPU when it is invoked by the CPU scheduler, but not more often than
+every 10 ms. Like in the ``performance`` case, the hardware configuration
+is not touched if the new P-state turns out to be the same as the current
+one.
+
+This is the default P-state selection algorithm if the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
+is not set.
+
+Passive Mode
+------------
+
+This is the default operation mode of ``intel_pstate`` for processors without
+hardware-managed P-states (HWP) support. It is always used if the
+``intel_pstate=passive`` argument is passed to the kernel in the command line
+regardless of whether or not the given processor supports HWP. [Note that the
+``intel_pstate=no_hwp`` setting causes the driver to start in the passive mode
+if it is not combined with ``intel_pstate=active``.] Like in the active mode
+without HWP support, in this mode ``intel_pstate`` may refuse to work with
+processors that are not recognized by it if HWP is prevented from being enabled
+through the kernel command line.
+
+If the driver works in this mode, the ``scaling_driver`` policy attribute in
+``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
+Then, the driver behaves like a regular ``CPUFreq`` scaling driver. That is,
+it is invoked by generic scaling governors when necessary to talk to the
+hardware in order to change the P-state of a CPU (in particular, the
+``schedutil`` governor can invoke it directly from scheduler context).
+
+While in this mode, ``intel_pstate`` can be used with all of the (generic)
+scaling governors listed by the ``scaling_available_governors`` policy attribute
+in ``sysfs`` (and the P-state selection algorithms described above are not
+used). Then, it is responsible for the configuration of policy objects
+corresponding to CPUs and provides the ``CPUFreq`` core (and the scaling
+governors attached to the policy objects) with accurate information on the
+maximum and minimum operating frequencies supported by the hardware (including
+the so-called "turbo" frequency ranges). In other words, in the passive mode
+the entire range of available P-states is exposed by ``intel_pstate`` to the
+``CPUFreq`` core. However, in this mode the driver does not register
+utilization update callbacks with the CPU scheduler and the ``scaling_cur_freq``
+information comes from the ``CPUFreq`` core (and is the last frequency selected
+by the current scaling governor for the given policy).
+
+
+.. _turbo:
+
+Turbo P-states Support
+======================
+
+In the majority of cases, the entire range of P-states available to
+``intel_pstate`` can be divided into two sub-ranges that correspond to
+different types of processor behavior, above and below a boundary that
+will be referred to as the "turbo threshold" in what follows.
+
+The P-states above the turbo threshold are referred to as "turbo P-states" and
+the whole sub-range of P-states they belong to is referred to as the "turbo
+range". These names are related to the Turbo Boost technology allowing a
+multicore processor to opportunistically increase the P-state of one or more
+cores if there is enough power to do that and if that is not going to cause the
+thermal envelope of the processor package to be exceeded.
+
+Specifically, if software sets the P-state of a CPU core within the turbo range
+(that is, above the turbo threshold), the processor is permitted to take over
+performance scaling control for that core and put it into turbo P-states of its
+choice going forward. However, that permission is interpreted differently by
+different processor generations. Namely, the Sandy Bridge generation of
+processors will never use any P-states above the last one set by software for
+the given core, even if it is within the turbo range, whereas all of the later
+processor generations will take it as a license to use any P-states from the
+turbo range, even above the one set by software. In other words, on those
+processors setting any P-state from the turbo range will enable the processor
+to put the given core into all turbo P-states up to and including the maximum
+supported one as it sees fit.
+
+One important property of turbo P-states is that they are not sustainable. More
+precisely, there is no guarantee that any CPUs will be able to stay in any of
+those states indefinitely, because the power distribution within the processor
+package may change over time or the thermal envelope it was designed for might
+be exceeded if a turbo P-state was used for too long.
+
+In turn, the P-states below the turbo threshold generally are sustainable. In
+fact, if one of them is set by software, the processor is not expected to change
+it to a lower one unless in a thermal stress or a power limit violation
+situation (a higher P-state may still be used if it is set for another CPU in
+the same package at the same time, for example).
+
+Some processors allow multiple cores to be in turbo P-states at the same time,
+but the maximum P-state that can be set for them generally depends on the number
+of cores running concurrently. The maximum turbo P-state that can be set for 3
+cores at the same time usually is lower than the analogous maximum P-state for
+2 cores, which in turn usually is lower than the maximum turbo P-state that can
+be set for 1 core. The one-core maximum turbo P-state is thus the maximum
+supported one overall.
+
+The maximum supported turbo P-state, the turbo threshold (the maximum supported
+non-turbo P-state) and the minimum supported P-state are specific to the
+processor model and can be determined by reading the processor's model-specific
+registers (MSRs). Moreover, some processors support the Configurable TDP
+(Thermal Design Power) feature and, when that feature is enabled, the turbo
+threshold effectively becomes a configurable value that can be set by the
+platform firmware.
+
+Unlike ``_PSS`` objects in the ACPI tables, ``intel_pstate`` always exposes
+the entire range of available P-states, including the whole turbo range, to the
+``CPUFreq`` core and (in the passive mode) to generic scaling governors. This
+generally causes turbo P-states to be set more often when ``intel_pstate`` is
+used relative to ACPI-based CPU performance scaling (see `below <acpi-cpufreq_>`_
+for more information).
+
+Moreover, since ``intel_pstate`` always knows what the real turbo threshold is
+(even if the Configurable TDP feature is enabled in the processor), its
+``no_turbo`` attribute in ``sysfs`` (described `below <no_turbo_attr_>`_) should
+work as expected in all cases (that is, if set to disable turbo P-states, it
+always should prevent ``intel_pstate`` from using them).
+
+
+Processor Support
+=================
+
+To handle a given processor ``intel_pstate`` requires a number of different
+pieces of information on it to be known, including:
+
+ * The minimum supported P-state.
+
+ * The maximum supported `non-turbo P-state <turbo_>`_.
+
+ * Whether or not turbo P-states are supported at all.
+
+ * The maximum supported `one-core turbo P-state <turbo_>`_ (if turbo P-states
+ are supported).
+
+ * The scaling formula to translate the driver's internal representation
+ of P-states into frequencies and the other way around.
+
+Generally, ways to obtain that information are specific to the processor model
+or family. Although it often is possible to obtain all of it from the processor
+itself (using model-specific registers), there are cases in which hardware
+manuals need to be consulted to get to it too.
+
+For this reason, there is a list of supported processors in ``intel_pstate`` and
+the driver initialization will fail if the detected processor is not in that
+list, unless it supports the HWP feature. [The interface to obtain all of the
+information listed above is the same for all of the processors supporting the
+HWP feature, which is why ``intel_pstate`` works with all of them.]
+
+
+User Space Interface in ``sysfs``
+=================================
+
+Global Attributes
+-----------------
+
+``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level. They are located in the
+``/sys/devices/system/cpu/intel_pstate/`` directory and affect all CPUs.
+
+Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
+argument is passed to the kernel in the command line.
+
+``max_perf_pct``
+ Maximum P-state the driver is allowed to set in percent of the
+ maximum supported performance level (the highest supported `turbo
+ P-state <turbo_>`_).
+
+ This attribute will not be exposed if the
+ ``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
+ command line.
+
+``min_perf_pct``
+ Minimum P-state the driver is allowed to set in percent of the
+ maximum supported performance level (the highest supported `turbo
+ P-state <turbo_>`_).
+
+ This attribute will not be exposed if the
+ ``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
+ command line.
+
+``num_pstates``
+ Number of P-states supported by the processor (between 0 and 255
+ inclusive) including both turbo and non-turbo P-states (see
+ `Turbo P-states Support`_).
+
+ The value of this attribute is not affected by the ``no_turbo``
+ setting described `below <no_turbo_attr_>`_.
+
+ This attribute is read-only.
+
+``turbo_pct``
+ Ratio of the `turbo range <turbo_>`_ size to the size of the entire
+ range of supported P-states, in percent.
+
+ This attribute is read-only.
+
+.. _no_turbo_attr:
+
+``no_turbo``
+ If set (equal to 1), the driver is not allowed to set any turbo P-states
+ (see `Turbo P-states Support`_). If unset (equalt to 0, which is the
+ default), turbo P-states can be set by the driver.
+ [Note that ``intel_pstate`` does not support the general ``boost``
+ attribute (supported by some other scaling drivers) which is replaced
+ by this one.]
+
+ This attrubute does not affect the maximum supported frequency value
+ supplied to the ``CPUFreq`` core and exposed via the policy interface,
+ but it affects the maximum possible value of per-policy P-state limits
+ (see `Interpretation of Policy Attributes`_ below for details).
+
+``hwp_dynamic_boost``
+ This attribute is only present if ``intel_pstate`` works in the
+ `active mode with the HWP feature enabled <Active Mode With HWP_>`_ in
+ the processor. If set (equal to 1), it causes the minimum P-state limit
+ to be increased dynamically for a short time whenever a task previously
+ waiting on I/O is selected to run on a given logical CPU (the purpose
+ of this mechanism is to improve performance).
+
+ This setting has no effect on logical CPUs whose minimum P-state limit
+ is directly set to the highest non-turbo P-state or above it.
+
+.. _status_attr:
+
+``status``
+ Operation mode of the driver: "active", "passive" or "off".
+
+ "active"
+ The driver is functional and in the `active mode
+ <Active Mode_>`_.
+
+ "passive"
+ The driver is functional and in the `passive mode
+ <Passive Mode_>`_.
+
+ "off"
+ The driver is not functional (it is not registered as a scaling
+ driver with the ``CPUFreq`` core).
+
+ This attribute can be written to in order to change the driver's
+ operation mode or to unregister it. The string written to it must be
+ one of the possible values of it and, if successful, the write will
+ cause the driver to switch over to the operation mode represented by
+ that string - or to be unregistered in the "off" case. [Actually,
+ switching over from the active mode to the passive mode or the other
+ way around causes the driver to be unregistered and registered again
+ with a different set of callbacks, so all of its settings (the global
+ as well as the per-policy ones) are then reset to their default
+ values, possibly depending on the target operation mode.]
+
+``energy_efficiency``
+ This attribute is only present on platforms with CPUs matching the Kaby
+ Lake or Coffee Lake desktop CPU model. By default, energy-efficiency
+ optimizations are disabled on these CPU models if HWP is enabled.
+ Enabling energy-efficiency optimizations may limit maximum operating
+ frequency with or without the HWP feature. With HWP enabled, the
+ optimizations are done only in the turbo frequency range. Without it,
+ they are done in the entire available frequency range. Setting this
+ attribute to "1" enables the energy-efficiency optimizations and setting
+ to "0" disables them.
+
+Interpretation of Policy Attributes
+-----------------------------------
+
+The interpretation of some ``CPUFreq`` policy attributes described in
+:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver
+and it generally depends on the driver's `operation mode <Operation Modes_>`_.
+
+First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and
+``scaling_cur_freq`` attributes are produced by applying a processor-specific
+multiplier to the internal P-state representation used by ``intel_pstate``.
+Also, the values of the ``scaling_max_freq`` and ``scaling_min_freq``
+attributes are capped by the frequency corresponding to the maximum P-state that
+the driver is allowed to set.
+
+If the ``no_turbo`` `global attribute <no_turbo_attr_>`_ is set, the driver is
+not allowed to use turbo P-states, so the maximum value of ``scaling_max_freq``
+and ``scaling_min_freq`` is limited to the maximum non-turbo P-state frequency.
+Accordingly, setting ``no_turbo`` causes ``scaling_max_freq`` and
+``scaling_min_freq`` to go down to that value if they were above it before.
+However, the old values of ``scaling_max_freq`` and ``scaling_min_freq`` will be
+restored after unsetting ``no_turbo``, unless these attributes have been written
+to after ``no_turbo`` was set.
+
+If ``no_turbo`` is not set, the maximum possible value of ``scaling_max_freq``
+and ``scaling_min_freq`` corresponds to the maximum supported turbo P-state,
+which also is the value of ``cpuinfo_max_freq`` in either case.
+
+Next, the following policy attributes have special meaning if
+``intel_pstate`` works in the `active mode <Active Mode_>`_:
+
+``scaling_available_governors``
+ List of P-state selection algorithms provided by ``intel_pstate``.
+
+``scaling_governor``
+ P-state selection algorithm provided by ``intel_pstate`` currently in
+ use with the given policy.
+
+``scaling_cur_freq``
+ Frequency of the average P-state of the CPU represented by the given
+ policy for the time interval between the last two invocations of the
+ driver's utilization update callback by the CPU scheduler for that CPU.
+
+One more policy attribute is present if the HWP feature is enabled in the
+processor:
+
+``base_frequency``
+ Shows the base frequency of the CPU. Any frequency above this will be
+ in the turbo frequency range.
+
+The meaning of these attributes in the `passive mode <Passive Mode_>`_ is the
+same as for other scaling drivers.
+
+Additionally, the value of the ``scaling_driver`` attribute for ``intel_pstate``
+depends on the operation mode of the driver. Namely, it is either
+"intel_pstate" (in the `active mode <Active Mode_>`_) or "intel_cpufreq" (in the
+`passive mode <Passive Mode_>`_).
+
+Coordination of P-State Limits
+------------------------------
+
+``intel_pstate`` allows P-state limits to be set in two ways: with the help of
+the ``max_perf_pct`` and ``min_perf_pct`` `global attributes
+<Global Attributes_>`_ or via the ``scaling_max_freq`` and ``scaling_min_freq``
+``CPUFreq`` policy attributes. The coordination between those limits is based
+on the following rules, regardless of the current operation mode of the driver:
+
+ 1. All CPUs are affected by the global limits (that is, none of them can be
+ requested to run faster than the global maximum and none of them can be
+ requested to run slower than the global minimum).
+
+ 2. Each individual CPU is affected by its own per-policy limits (that is, it
+ cannot be requested to run faster than its own per-policy maximum and it
+ cannot be requested to run slower than its own per-policy minimum). The
+ effective performance depends on whether the platform supports per core
+ P-states, hyper-threading is enabled and on current performance requests
+ from other CPUs. When platform doesn't support per core P-states, the
+ effective performance can be more than the policy limits set on a CPU, if
+ other CPUs are requesting higher performance at that moment. Even with per
+ core P-states support, when hyper-threading is enabled, if the sibling CPU
+ is requesting higher performance, the other siblings will get higher
+ performance than their policy limits.
+
+ 3. The global and per-policy limits can be set independently.
+
+In the `active mode with the HWP feature enabled <Active Mode With HWP_>`_, the
+resulting effective values are written into hardware registers whenever the
+limits change in order to request its internal P-state selection logic to always
+set P-states within these limits. Otherwise, the limits are taken into account
+by scaling governors (in the `passive mode <Passive Mode_>`_) and by the driver
+every time before setting a new P-state for a CPU.
+
+Additionally, if the ``intel_pstate=per_cpu_perf_limits`` command line argument
+is passed to the kernel, ``max_perf_pct`` and ``min_perf_pct`` are not exposed
+at all and the only way to set the limits is by using the policy attributes.
+
+
+Energy vs Performance Hints
+---------------------------
+
+If the hardware-managed P-states (HWP) is enabled in the processor, additional
+attributes, intended to allow user space to help ``intel_pstate`` to adjust the
+processor's internal P-state selection logic by focusing it on performance or on
+energy-efficiency, or somewhere between the two extremes, are present in every
+``CPUFreq`` policy directory in ``sysfs``. They are :
+
+``energy_performance_preference``
+ Current value of the energy vs performance hint for the given policy
+ (or the CPU represented by it).
+
+ The hint can be changed by writing to this attribute.
+
+``energy_performance_available_preferences``
+ List of strings that can be written to the
+ ``energy_performance_preference`` attribute.
+
+ They represent different energy vs performance hints and should be
+ self-explanatory, except that ``default`` represents whatever hint
+ value was set by the platform firmware.
+
+Strings written to the ``energy_performance_preference`` attribute are
+internally translated to integer values written to the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob. It is also possible to write a positive
+integer value between 0 to 255, if the EPP feature is present. If the EPP
+feature is not present, writing integer value to this attribute is not
+supported. In this case, user can use the
+"/sys/devices/system/cpu/cpu*/power/energy_perf_bias" interface.
+
+[Note that tasks may by migrated from one CPU to another by the scheduler's
+load-balancing algorithm and if different energy vs performance hints are
+set for those CPUs, that may lead to undesirable outcomes. To avoid such
+issues it is better to set the same energy vs performance hint for all CPUs
+or to pin every task potentially sensitive to them to a specific CPU.]
+
+.. _acpi-cpufreq:
+
+``intel_pstate`` vs ``acpi-cpufreq``
+====================================
+
+On the majority of systems supported by ``intel_pstate``, the ACPI tables
+provided by the platform firmware contain ``_PSS`` objects returning information
+that can be used for CPU performance scaling (refer to the ACPI specification
+[3]_ for details on the ``_PSS`` objects and the format of the information
+returned by them).
+
+The information returned by the ACPI ``_PSS`` objects is used by the
+``acpi-cpufreq`` scaling driver. On systems supported by ``intel_pstate``
+the ``acpi-cpufreq`` driver uses the same hardware CPU performance scaling
+interface, but the set of P-states it can use is limited by the ``_PSS``
+output.
+
+On those systems each ``_PSS`` object returns a list of P-states supported by
+the corresponding CPU which basically is a subset of the P-states range that can
+be used by ``intel_pstate`` on the same system, with one exception: the whole
+`turbo range <turbo_>`_ is represented by one item in it (the topmost one). By
+convention, the frequency returned by ``_PSS`` for that item is greater by 1 MHz
+than the frequency of the highest non-turbo P-state listed by it, but the
+corresponding P-state representation (following the hardware specification)
+returned for it matches the maximum supported turbo P-state (or is the
+special value 255 meaning essentially "go as high as you can get").
+
+The list of P-states returned by ``_PSS`` is reflected by the table of
+available frequencies supplied by ``acpi-cpufreq`` to the ``CPUFreq`` core and
+scaling governors and the minimum and maximum supported frequencies reported by
+it come from that list as well. In particular, given the special representation
+of the turbo range described above, this means that the maximum supported
+frequency reported by ``acpi-cpufreq`` is higher by 1 MHz than the frequency
+of the highest supported non-turbo P-state listed by ``_PSS`` which, of course,
+affects decisions made by the scaling governors, except for ``powersave`` and
+``performance``.
+
+For example, if a given governor attempts to select a frequency proportional to
+estimated CPU load and maps the load of 100% to the maximum supported frequency
+(possibly multiplied by a constant), then it will tend to choose P-states below
+the turbo threshold if ``acpi-cpufreq`` is used as the scaling driver, because
+in that case the turbo range corresponds to a small fraction of the frequency
+band it can use (1 MHz vs 1 GHz or more). In consequence, it will only go to
+the turbo range for the highest loads and the other loads above 50% that might
+benefit from running at turbo frequencies will be given non-turbo P-states
+instead.
+
+One more issue related to that may appear on systems supporting the
+`Configurable TDP feature <turbo_>`_ allowing the platform firmware to set the
+turbo threshold. Namely, if that is not coordinated with the lists of P-states
+returned by ``_PSS`` properly, there may be more than one item corresponding to
+a turbo P-state in those lists and there may be a problem with avoiding the
+turbo range (if desirable or necessary). Usually, to avoid using turbo
+P-states overall, ``acpi-cpufreq`` simply avoids using the topmost state listed
+by ``_PSS``, but that is not sufficient when there are other turbo P-states in
+the list returned by it.
+
+Apart from the above, ``acpi-cpufreq`` works like ``intel_pstate`` in the
+`passive mode <Passive Mode_>`_, except that the number of P-states it can set
+is limited to the ones listed by the ACPI ``_PSS`` objects.
+
+
+Kernel Command Line Options for ``intel_pstate``
+================================================
+
+Several kernel command line options can be used to pass early-configuration-time
+parameters to ``intel_pstate`` in order to enforce specific behavior of it. All
+of them have to be prepended with the ``intel_pstate=`` prefix.
+
+``disable``
+ Do not register ``intel_pstate`` as the scaling driver even if the
+ processor is supported by it.
+
+``active``
+ Register ``intel_pstate`` in the `active mode <Active Mode_>`_ to start
+ with.
+
+``passive``
+ Register ``intel_pstate`` in the `passive mode <Passive Mode_>`_ to
+ start with.
+
+``force``
+ Register ``intel_pstate`` as the scaling driver instead of
+ ``acpi-cpufreq`` even if the latter is preferred on the given system.
+
+ This may prevent some platform features (such as thermal controls and
+ power capping) that rely on the availability of ACPI P-states
+ information from functioning as expected, so it should be used with
+ caution.
+
+ This option does not work with processors that are not supported by
+ ``intel_pstate`` and on platforms where the ``pcc-cpufreq`` scaling
+ driver is used instead of ``acpi-cpufreq``.
+
+``no_hwp``
+ Do not enable the hardware-managed P-states (HWP) feature even if it is
+ supported by the processor.
+
+``hwp_only``
+ Register ``intel_pstate`` as the scaling driver only if the
+ hardware-managed P-states (HWP) feature is supported by the processor.
+
+``support_acpi_ppc``
+ Take ACPI ``_PPC`` performance limits into account.
+
+ If the preferred power management profile in the FADT (Fixed ACPI
+ Description Table) is set to "Enterprise Server" or "Performance
+ Server", the ACPI ``_PPC`` limits are taken into account by default
+ and this option has no effect.
+
+``per_cpu_perf_limits``
+ Use per-logical-CPU P-State limits (see `Coordination of P-state
+ Limits`_ for details).
+
+
+Diagnostics and Tuning
+======================
+
+Trace Events
+------------
+
+There are two static trace events that can be used for ``intel_pstate``
+diagnostics. One of them is the ``cpu_frequency`` trace event generally used
+by ``CPUFreq``, and the other one is the ``pstate_sample`` trace event specific
+to ``intel_pstate``. Both of them are triggered by ``intel_pstate`` only if
+it works in the `active mode <Active Mode_>`_.
+
+The following sequence of shell commands can be used to enable them and see
+their output (if the kernel is generally configured to support event tracing)::
+
+ # cd /sys/kernel/debug/tracing/
+ # echo 1 > events/power/pstate_sample/enable
+ # echo 1 > events/power/cpu_frequency/enable
+ # cat trace
+ gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107 scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618 freq=2474476
+ cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
+
+If ``intel_pstate`` works in the `passive mode <Passive Mode_>`_, the
+``cpu_frequency`` trace event will be triggered either by the ``schedutil``
+scaling governor (for the policies it is attached to), or by the ``CPUFreq``
+core (for the policies with other scaling governors).
+
+``ftrace``
+----------
+
+The ``ftrace`` interface can be used for low-level diagnostics of
+``intel_pstate``. For example, to check how often the function to set a
+P-state is called, the ``ftrace`` filter can be set to
+:c:func:`intel_pstate_set_pstate`::
+
+ # cd /sys/kernel/debug/tracing/
+ # cat available_filter_functions | grep -i pstate
+ intel_pstate_set_pstate
+ intel_pstate_cpu_init
+ ...
+ # echo intel_pstate_set_pstate > set_ftrace_filter
+ # echo function > current_tracer
+ # cat trace | head -15
+ # tracer: function
+ #
+ # entries-in-buffer/entries-written: 80/80 #P:4
+ #
+ # _-----=> irqs-off
+ # / _----=> need-resched
+ # | / _---=> hardirq/softirq
+ # || / _--=> preempt-depth
+ # ||| / delay
+ # TASK-PID CPU# |||| TIMESTAMP FUNCTION
+ # | | | |||| | |
+ Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
+ gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
+ gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
+ <idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
+
+
+References
+==========
+
+.. [1] Kristen Accardi, *Balancing Power and Performance in the Linux Kernel*,
+ https://events.static.linuxfound.org/sites/events/files/slides/LinuxConEurope_2015.pdf
+
+.. [2] *Intel® 64 and IA-32 Architectures Software Developer’s Manual Volume 3: System Programming Guide*,
+ https://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-system-programming-manual-325384.html
+
+.. [3] *Advanced Configuration and Power Interface Specification*,
+ https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf
diff --git a/Documentation/admin-guide/pm/sleep-states.rst b/Documentation/admin-guide/pm/sleep-states.rst
new file mode 100644
index 000000000..ee55a460c
--- /dev/null
+++ b/Documentation/admin-guide/pm/sleep-states.rst
@@ -0,0 +1,291 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===================
+System Sleep States
+===================
+
+:Copyright: |copy| 2017 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+Sleep states are global low-power states of the entire system in which user
+space code cannot be executed and the overall system activity is significantly
+reduced.
+
+
+Sleep States That Can Be Supported
+==================================
+
+Depending on its configuration and the capabilities of the platform it runs on,
+the Linux kernel can support up to four system sleep states, including
+hibernation and up to three variants of system suspend. The sleep states that
+can be supported by the kernel are listed below.
+
+.. _s2idle:
+
+Suspend-to-Idle
+---------------
+
+This is a generic, pure software, light-weight variant of system suspend (also
+referred to as S2I or S2Idle). It allows more energy to be saved relative to
+runtime idle by freezing user space, suspending the timekeeping and putting all
+I/O devices into low-power states (possibly lower-power than available in the
+working state), such that the processors can spend time in their deepest idle
+states while the system is suspended.
+
+The system is woken up from this state by in-band interrupts, so theoretically
+any devices that can cause interrupts to be generated in the working state can
+also be set up as wakeup devices for S2Idle.
+
+This state can be used on platforms without support for :ref:`standby <standby>`
+or :ref:`suspend-to-RAM <s2ram>`, or it can be used in addition to any of the
+deeper system suspend variants to provide reduced resume latency. It is always
+supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration option is set.
+
+.. _standby:
+
+Standby
+-------
+
+This state, if supported, offers moderate, but real, energy savings, while
+providing a relatively straightforward transition back to the working state. No
+operating state is lost (the system core logic retains power), so the system can
+go back to where it left off easily enough.
+
+In addition to freezing user space, suspending the timekeeping and putting all
+I/O devices into low-power states, which is done for :ref:`suspend-to-idle
+<s2idle>` too, nonboot CPUs are taken offline and all low-level system functions
+are suspended during transitions into this state. For this reason, it should
+allow more energy to be saved relative to :ref:`suspend-to-idle <s2idle>`, but
+the resume latency will generally be greater than for that state.
+
+The set of devices that can wake up the system from this state usually is
+reduced relative to :ref:`suspend-to-idle <s2idle>` and it may be necessary to
+rely on the platform for setting up the wakeup functionality as appropriate.
+
+This state is supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration
+option is set and the support for it is registered by the platform with the
+core system suspend subsystem. On ACPI-based systems this state is mapped to
+the S1 system state defined by ACPI.
+
+.. _s2ram:
+
+Suspend-to-RAM
+--------------
+
+This state (also referred to as STR or S2RAM), if supported, offers significant
+energy savings as everything in the system is put into a low-power state, except
+for memory, which should be placed into the self-refresh mode to retain its
+contents. All of the steps carried out when entering :ref:`standby <standby>`
+are also carried out during transitions to S2RAM. Additional operations may
+take place depending on the platform capabilities. In particular, on ACPI-based
+systems the kernel passes control to the platform firmware (BIOS) as the last
+step during S2RAM transitions and that usually results in powering down some
+more low-level components that are not directly controlled by the kernel.
+
+The state of devices and CPUs is saved and held in memory. All devices are
+suspended and put into low-power states. In many cases, all peripheral buses
+lose power when entering S2RAM, so devices must be able to handle the transition
+back to the "on" state.
+
+On ACPI-based systems S2RAM requires some minimal boot-strapping code in the
+platform firmware to resume the system from it. This may be the case on other
+platforms too.
+
+The set of devices that can wake up the system from S2RAM usually is reduced
+relative to :ref:`suspend-to-idle <s2idle>` and :ref:`standby <standby>` and it
+may be necessary to rely on the platform for setting up the wakeup functionality
+as appropriate.
+
+S2RAM is supported if the :c:macro:`CONFIG_SUSPEND` kernel configuration option
+is set and the support for it is registered by the platform with the core system
+suspend subsystem. On ACPI-based systems it is mapped to the S3 system state
+defined by ACPI.
+
+.. _hibernation:
+
+Hibernation
+-----------
+
+This state (also referred to as Suspend-to-Disk or STD) offers the greatest
+energy savings and can be used even in the absence of low-level platform support
+for system suspend. However, it requires some low-level code for resuming the
+system to be present for the underlying CPU architecture.
+
+Hibernation is significantly different from any of the system suspend variants.
+It takes three system state changes to put it into hibernation and two system
+state changes to resume it.
+
+First, when hibernation is triggered, the kernel stops all system activity and
+creates a snapshot image of memory to be written into persistent storage. Next,
+the system goes into a state in which the snapshot image can be saved, the image
+is written out and finally the system goes into the target low-power state in
+which power is cut from almost all of its hardware components, including memory,
+except for a limited set of wakeup devices.
+
+Once the snapshot image has been written out, the system may either enter a
+special low-power state (like ACPI S4), or it may simply power down itself.
+Powering down means minimum power draw and it allows this mechanism to work on
+any system. However, entering a special low-power state may allow additional
+means of system wakeup to be used (e.g. pressing a key on the keyboard or
+opening a laptop lid).
+
+After wakeup, control goes to the platform firmware that runs a boot loader
+which boots a fresh instance of the kernel (control may also go directly to
+the boot loader, depending on the system configuration, but anyway it causes
+a fresh instance of the kernel to be booted). That new instance of the kernel
+(referred to as the ``restore kernel``) looks for a hibernation image in
+persistent storage and if one is found, it is loaded into memory. Next, all
+activity in the system is stopped and the restore kernel overwrites itself with
+the image contents and jumps into a special trampoline area in the original
+kernel stored in the image (referred to as the ``image kernel``), which is where
+the special architecture-specific low-level code is needed. Finally, the
+image kernel restores the system to the pre-hibernation state and allows user
+space to run again.
+
+Hibernation is supported if the :c:macro:`CONFIG_HIBERNATION` kernel
+configuration option is set. However, this option can only be set if support
+for the given CPU architecture includes the low-level code for system resume.
+
+
+Basic ``sysfs`` Interfaces for System Suspend and Hibernation
+=============================================================
+
+The power management subsystem provides userspace with a unified ``sysfs``
+interface for system sleep regardless of the underlying system architecture or
+platform. That interface is located in the :file:`/sys/power/` directory
+(assuming that ``sysfs`` is mounted at :file:`/sys`) and it consists of the
+following attributes (files):
+
+``state``
+ This file contains a list of strings representing sleep states supported
+ by the kernel. Writing one of these strings into it causes the kernel
+ to start a transition of the system into the sleep state represented by
+ that string.
+
+ In particular, the "disk", "freeze" and "standby" strings represent the
+ :ref:`hibernation <hibernation>`, :ref:`suspend-to-idle <s2idle>` and
+ :ref:`standby <standby>` sleep states, respectively. The "mem" string
+ is interpreted in accordance with the contents of the ``mem_sleep`` file
+ described below.
+
+ If the kernel does not support any system sleep states, this file is
+ not present.
+
+``mem_sleep``
+ This file contains a list of strings representing supported system
+ suspend variants and allows user space to select the variant to be
+ associated with the "mem" string in the ``state`` file described above.
+
+ The strings that may be present in this file are "s2idle", "shallow"
+ and "deep". The "s2idle" string always represents :ref:`suspend-to-idle
+ <s2idle>` and, by convention, "shallow" and "deep" represent
+ :ref:`standby <standby>` and :ref:`suspend-to-RAM <s2ram>`,
+ respectively.
+
+ Writing one of the listed strings into this file causes the system
+ suspend variant represented by it to be associated with the "mem" string
+ in the ``state`` file. The string representing the suspend variant
+ currently associated with the "mem" string in the ``state`` file is
+ shown in square brackets.
+
+ If the kernel does not support system suspend, this file is not present.
+
+``disk``
+ This file controls the operating mode of hibernation (Suspend-to-Disk).
+ Specifically, it tells the kernel what to do after creating a
+ hibernation image.
+
+ Reading from it returns a list of supported options encoded as:
+
+ ``platform``
+ Put the system into a special low-power state (e.g. ACPI S4) to
+ make additional wakeup options available and possibly allow the
+ platform firmware to take a simplified initialization path after
+ wakeup.
+
+ It is only available if the platform provides a special
+ mechanism to put the system to sleep after creating a
+ hibernation image (platforms with ACPI do that as a rule, for
+ example).
+
+ ``shutdown``
+ Power off the system.
+
+ ``reboot``
+ Reboot the system (useful for diagnostics mostly).
+
+ ``suspend``
+ Hybrid system suspend. Put the system into the suspend sleep
+ state selected through the ``mem_sleep`` file described above.
+ If the system is successfully woken up from that state, discard
+ the hibernation image and continue. Otherwise, use the image
+ to restore the previous state of the system.
+
+ It is available if system suspend is supported.
+
+ ``test_resume``
+ Diagnostic operation. Load the image as though the system had
+ just woken up from hibernation and the currently running kernel
+ instance was a restore kernel and follow up with full system
+ resume.
+
+ Writing one of the strings listed above into this file causes the option
+ represented by it to be selected.
+
+ The currently selected option is shown in square brackets, which means
+ that the operation represented by it will be carried out after creating
+ and saving the image when hibernation is triggered by writing ``disk``
+ to :file:`/sys/power/state`.
+
+ If the kernel does not support hibernation, this file is not present.
+
+``image_size``
+ This file controls the size of hibernation images.
+
+ It can be written a string representing a non-negative integer that will
+ be used as a best-effort upper limit of the image size, in bytes. The
+ hibernation core will do its best to ensure that the image size will not
+ exceed that number, but if that turns out to be impossible to achieve, a
+ hibernation image will still be created and its size will be as small as
+ possible. In particular, writing '0' to this file causes the size of
+ hibernation images to be minimum.
+
+ Reading from it returns the current image size limit, which is set to
+ around 2/5 of the available RAM size by default.
+
+``pm_trace``
+ This file controls the "PM trace" mechanism saving the last suspend
+ or resume event point in the RTC memory across reboots. It helps to
+ debug hard lockups or reboots due to device driver failures that occur
+ during system suspend or resume (which is more common) more effectively.
+
+ If it contains "1", the fingerprint of each suspend/resume event point
+ in turn will be stored in the RTC memory (overwriting the actual RTC
+ information), so it will survive a system crash if one occurs right
+ after storing it and it can be used later to identify the driver that
+ caused the crash to happen.
+
+ It contains "0" by default, which may be changed to "1" by writing a
+ string representing a nonzero integer into it.
+
+According to the above, there are two ways to make the system go into the
+:ref:`suspend-to-idle <s2idle>` state. The first one is to write "freeze"
+directly to :file:`/sys/power/state`. The second one is to write "s2idle" to
+:file:`/sys/power/mem_sleep` and then to write "mem" to
+:file:`/sys/power/state`. Likewise, there are two ways to make the system go
+into the :ref:`standby <standby>` state (the strings to write to the control
+files in that case are "standby" or "shallow" and "mem", respectively) if that
+state is supported by the platform. However, there is only one way to make the
+system go into the :ref:`suspend-to-RAM <s2ram>` state (write "deep" into
+:file:`/sys/power/mem_sleep` and "mem" into :file:`/sys/power/state`).
+
+The default suspend variant (ie. the one to be used without writing anything
+into :file:`/sys/power/mem_sleep`) is either "deep" (on the majority of systems
+supporting :ref:`suspend-to-RAM <s2ram>`) or "s2idle", but it can be overridden
+by the value of the ``mem_sleep_default`` parameter in the kernel command line.
+On some systems with ACPI, depending on the information in the ACPI tables, the
+default may be "s2idle" even if :ref:`suspend-to-RAM <s2ram>` is supported in
+principle.
diff --git a/Documentation/admin-guide/pm/strategies.rst b/Documentation/admin-guide/pm/strategies.rst
new file mode 100644
index 000000000..dd0362e32
--- /dev/null
+++ b/Documentation/admin-guide/pm/strategies.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===========================
+Power Management Strategies
+===========================
+
+:Copyright: |copy| 2017 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+The Linux kernel supports two major high-level power management strategies.
+
+One of them is based on using global low-power states of the whole system in
+which user space code cannot be executed and the overall system activity is
+significantly reduced, referred to as :doc:`sleep states <sleep-states>`. The
+kernel puts the system into one of these states when requested by user space
+and the system stays in it until a special signal is received from one of
+designated devices, triggering a transition to the ``working state`` in which
+user space code can run. Because sleep states are global and the whole system
+is affected by the state changes, this strategy is referred to as the
+:doc:`system-wide power management <system-wide>`.
+
+The other strategy, referred to as the :doc:`working-state power management
+<working-state>`, is based on adjusting the power states of individual hardware
+components of the system, as needed, in the working state. In consequence, if
+this strategy is in use, the working state of the system usually does not
+correspond to any particular physical configuration of it, but can be treated as
+a metastate covering a range of different power states of the system in which
+the individual components of it can be either ``active`` (in use) or
+``inactive`` (idle). If they are active, they have to be in power states
+allowing them to process data and to be accessed by software. In turn, if they
+are inactive, ideally, they should be in low-power states in which they may not
+be accessible.
+
+If all of the system components are active, the system as a whole is regarded as
+"runtime active" and that situation typically corresponds to the maximum power
+draw (or maximum energy usage) of it. If all of them are inactive, the system
+as a whole is regarded as "runtime idle" which may be very close to a sleep
+state from the physical system configuration and power draw perspective, but
+then it takes much less time and effort to start executing user space code than
+for the same system in a sleep state. However, transitions from sleep states
+back to the working state can only be started by a limited set of devices, so
+typically the system can spend much more time in a sleep state than it can be
+runtime idle in one go. For this reason, systems usually use less energy in
+sleep states than when they are runtime idle most of the time.
+
+Moreover, the two power management strategies address different usage scenarios.
+Namely, if the user indicates that the system will not be in use going forward,
+for example by closing its lid (if the system is a laptop), it probably should
+go into a sleep state at that point. On the other hand, if the user simply goes
+away from the laptop keyboard, it probably should stay in the working state and
+use the working-state power management in case it becomes idle, because the user
+may come back to it at any time and then may want the system to be immediately
+accessible.
diff --git a/Documentation/admin-guide/pm/suspend-flows.rst b/Documentation/admin-guide/pm/suspend-flows.rst
new file mode 100644
index 000000000..c479d7462
--- /dev/null
+++ b/Documentation/admin-guide/pm/suspend-flows.rst
@@ -0,0 +1,270 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=========================
+System Suspend Code Flows
+=========================
+
+:Copyright: |copy| 2020 Intel Corporation
+
+:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+At least one global system-wide transition needs to be carried out for the
+system to get from the working state into one of the supported
+:doc:`sleep states <sleep-states>`. Hibernation requires more than one
+transition to occur for this purpose, but the other sleep states, commonly
+referred to as *system-wide suspend* (or simply *system suspend*) states, need
+only one.
+
+For those sleep states, the transition from the working state of the system into
+the target sleep state is referred to as *system suspend* too (in the majority
+of cases, whether this means a transition or a sleep state of the system should
+be clear from the context) and the transition back from the sleep state into the
+working state is referred to as *system resume*.
+
+The kernel code flows associated with the suspend and resume transitions for
+different sleep states of the system are quite similar, but there are some
+significant differences between the :ref:`suspend-to-idle <s2idle>` code flows
+and the code flows related to the :ref:`suspend-to-RAM <s2ram>` and
+:ref:`standby <standby>` sleep states.
+
+The :ref:`suspend-to-RAM <s2ram>` and :ref:`standby <standby>` sleep states
+cannot be implemented without platform support and the difference between them
+boils down to the platform-specific actions carried out by the suspend and
+resume hooks that need to be provided by the platform driver to make them
+available. Apart from that, the suspend and resume code flows for these sleep
+states are mostly identical, so they both together will be referred to as
+*platform-dependent suspend* states in what follows.
+
+
+.. _s2idle_suspend:
+
+Suspend-to-idle Suspend Code Flow
+=================================
+
+The following steps are taken in order to transition the system from the working
+state to the :ref:`suspend-to-idle <s2idle>` sleep state:
+
+ 1. Invoking system-wide suspend notifiers.
+
+ Kernel subsystems can register callbacks to be invoked when the suspend
+ transition is about to occur and when the resume transition has finished.
+
+ That allows them to prepare for the change of the system state and to clean
+ up after getting back to the working state.
+
+ 2. Freezing tasks.
+
+ Tasks are frozen primarily in order to avoid unchecked hardware accesses
+ from user space through MMIO regions or I/O registers exposed directly to
+ it and to prevent user space from entering the kernel while the next step
+ of the transition is in progress (which might have been problematic for
+ various reasons).
+
+ All user space tasks are intercepted as though they were sent a signal and
+ put into uninterruptible sleep until the end of the subsequent system resume
+ transition.
+
+ The kernel threads that choose to be frozen during system suspend for
+ specific reasons are frozen subsequently, but they are not intercepted.
+ Instead, they are expected to periodically check whether or not they need
+ to be frozen and to put themselves into uninterruptible sleep if so. [Note,
+ however, that kernel threads can use locking and other concurrency controls
+ available in kernel space to synchronize themselves with system suspend and
+ resume, which can be much more precise than the freezing, so the latter is
+ not a recommended option for kernel threads.]
+
+ 3. Suspending devices and reconfiguring IRQs.
+
+ Devices are suspended in four phases called *prepare*, *suspend*,
+ *late suspend* and *noirq suspend* (see :ref:`driverapi_pm_devices` for more
+ information on what exactly happens in each phase).
+
+ Every device is visited in each phase, but typically it is not physically
+ accessed in more than two of them.
+
+ The runtime PM API is disabled for every device during the *late* suspend
+ phase and high-level ("action") interrupt handlers are prevented from being
+ invoked before the *noirq* suspend phase.
+
+ Interrupts are still handled after that, but they are only acknowledged to
+ interrupt controllers without performing any device-specific actions that
+ would be triggered in the working state of the system (those actions are
+ deferred till the subsequent system resume transition as described
+ `below <s2idle_resume_>`_).
+
+ IRQs associated with system wakeup devices are "armed" so that the resume
+ transition of the system is started when one of them signals an event.
+
+ 4. Freezing the scheduler tick and suspending timekeeping.
+
+ When all devices have been suspended, CPUs enter the idle loop and are put
+ into the deepest available idle state. While doing that, each of them
+ "freezes" its own scheduler tick so that the timer events associated with
+ the tick do not occur until the CPU is woken up by another interrupt source.
+
+ The last CPU to enter the idle state also stops the timekeeping which
+ (among other things) prevents high resolution timers from triggering going
+ forward until the first CPU that is woken up restarts the timekeeping.
+ That allows the CPUs to stay in the deep idle state relatively long in one
+ go.
+
+ From this point on, the CPUs can only be woken up by non-timer hardware
+ interrupts. If that happens, they go back to the idle state unless the
+ interrupt that woke up one of them comes from an IRQ that has been armed for
+ system wakeup, in which case the system resume transition is started.
+
+
+.. _s2idle_resume:
+
+Suspend-to-idle Resume Code Flow
+================================
+
+The following steps are taken in order to transition the system from the
+:ref:`suspend-to-idle <s2idle>` sleep state into the working state:
+
+ 1. Resuming timekeeping and unfreezing the scheduler tick.
+
+ When one of the CPUs is woken up (by a non-timer hardware interrupt), it
+ leaves the idle state entered in the last step of the preceding suspend
+ transition, restarts the timekeeping (unless it has been restarted already
+ by another CPU that woke up earlier) and the scheduler tick on that CPU is
+ unfrozen.
+
+ If the interrupt that has woken up the CPU was armed for system wakeup,
+ the system resume transition begins.
+
+ 2. Resuming devices and restoring the working-state configuration of IRQs.
+
+ Devices are resumed in four phases called *noirq resume*, *early resume*,
+ *resume* and *complete* (see :ref:`driverapi_pm_devices` for more
+ information on what exactly happens in each phase).
+
+ Every device is visited in each phase, but typically it is not physically
+ accessed in more than two of them.
+
+ The working-state configuration of IRQs is restored after the *noirq* resume
+ phase and the runtime PM API is re-enabled for every device whose driver
+ supports it during the *early* resume phase.
+
+ 3. Thawing tasks.
+
+ Tasks frozen in step 2 of the preceding `suspend <s2idle_suspend_>`_
+ transition are "thawed", which means that they are woken up from the
+ uninterruptible sleep that they went into at that time and user space tasks
+ are allowed to exit the kernel.
+
+ 4. Invoking system-wide resume notifiers.
+
+ This is analogous to step 1 of the `suspend <s2idle_suspend_>`_ transition
+ and the same set of callbacks is invoked at this point, but a different
+ "notification type" parameter value is passed to them.
+
+
+Platform-dependent Suspend Code Flow
+====================================
+
+The following steps are taken in order to transition the system from the working
+state to platform-dependent suspend state:
+
+ 1. Invoking system-wide suspend notifiers.
+
+ This step is the same as step 1 of the suspend-to-idle suspend transition
+ described `above <s2idle_suspend_>`_.
+
+ 2. Freezing tasks.
+
+ This step is the same as step 2 of the suspend-to-idle suspend transition
+ described `above <s2idle_suspend_>`_.
+
+ 3. Suspending devices and reconfiguring IRQs.
+
+ This step is analogous to step 3 of the suspend-to-idle suspend transition
+ described `above <s2idle_suspend_>`_, but the arming of IRQs for system
+ wakeup generally does not have any effect on the platform.
+
+ There are platforms that can go into a very deep low-power state internally
+ when all CPUs in them are in sufficiently deep idle states and all I/O
+ devices have been put into low-power states. On those platforms,
+ suspend-to-idle can reduce system power very effectively.
+
+ On the other platforms, however, low-level components (like interrupt
+ controllers) need to be turned off in a platform-specific way (implemented
+ in the hooks provided by the platform driver) to achieve comparable power
+ reduction.
+
+ That usually prevents in-band hardware interrupts from waking up the system,
+ which must be done in a special platform-dependent way. Then, the
+ configuration of system wakeup sources usually starts when system wakeup
+ devices are suspended and is finalized by the platform suspend hooks later
+ on.
+
+ 4. Disabling non-boot CPUs.
+
+ On some platforms the suspend hooks mentioned above must run in a one-CPU
+ configuration of the system (in particular, the hardware cannot be accessed
+ by any code running in parallel with the platform suspend hooks that may,
+ and often do, trap into the platform firmware in order to finalize the
+ suspend transition).
+
+ For this reason, the CPU offline/online (CPU hotplug) framework is used
+ to take all of the CPUs in the system, except for one (the boot CPU),
+ offline (typically, the CPUs that have been taken offline go into deep idle
+ states).
+
+ This means that all tasks are migrated away from those CPUs and all IRQs are
+ rerouted to the only CPU that remains online.
+
+ 5. Suspending core system components.
+
+ This prepares the core system components for (possibly) losing power going
+ forward and suspends the timekeeping.
+
+ 6. Platform-specific power removal.
+
+ This is expected to remove power from all of the system components except
+ for the memory controller and RAM (in order to preserve the contents of the
+ latter) and some devices designated for system wakeup.
+
+ In many cases control is passed to the platform firmware which is expected
+ to finalize the suspend transition as needed.
+
+
+Platform-dependent Resume Code Flow
+===================================
+
+The following steps are taken in order to transition the system from a
+platform-dependent suspend state into the working state:
+
+ 1. Platform-specific system wakeup.
+
+ The platform is woken up by a signal from one of the designated system
+ wakeup devices (which need not be an in-band hardware interrupt) and
+ control is passed back to the kernel (the working configuration of the
+ platform may need to be restored by the platform firmware before the
+ kernel gets control again).
+
+ 2. Resuming core system components.
+
+ The suspend-time configuration of the core system components is restored and
+ the timekeeping is resumed.
+
+ 3. Re-enabling non-boot CPUs.
+
+ The CPUs disabled in step 4 of the preceding suspend transition are taken
+ back online and their suspend-time configuration is restored.
+
+ 4. Resuming devices and restoring the working-state configuration of IRQs.
+
+ This step is the same as step 2 of the suspend-to-idle suspend transition
+ described `above <s2idle_resume_>`_.
+
+ 5. Thawing tasks.
+
+ This step is the same as step 3 of the suspend-to-idle suspend transition
+ described `above <s2idle_resume_>`_.
+
+ 6. Invoking system-wide resume notifiers.
+
+ This step is the same as step 4 of the suspend-to-idle suspend transition
+ described `above <s2idle_resume_>`_.
diff --git a/Documentation/admin-guide/pm/system-wide.rst b/Documentation/admin-guide/pm/system-wide.rst
new file mode 100644
index 000000000..1a1924d71
--- /dev/null
+++ b/Documentation/admin-guide/pm/system-wide.rst
@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+System-Wide Power Management
+============================
+
+.. toctree::
+ :maxdepth: 2
+
+ sleep-states
+ suspend-flows
diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst
new file mode 100644
index 000000000..f40994c42
--- /dev/null
+++ b/Documentation/admin-guide/pm/working-state.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+Working-State Power Management
+==============================
+
+.. toctree::
+ :maxdepth: 2
+
+ cpuidle
+ intel_idle
+ cpufreq
+ intel_pstate
+ cpufreq_drivers
+ intel_epb
+ intel-speed-select