diff options
Diffstat (limited to 'Documentation/admin-guide/xfs.rst')
| -rw-r--r-- | Documentation/admin-guide/xfs.rst | 497 |
1 files changed, 497 insertions, 0 deletions
diff --git a/Documentation/admin-guide/xfs.rst b/Documentation/admin-guide/xfs.rst new file mode 100644 index 000000000..86de8a1ad --- /dev/null +++ b/Documentation/admin-guide/xfs.rst @@ -0,0 +1,497 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +The SGI XFS Filesystem +====================== + +XFS is a high performance journaling filesystem which originated +on the SGI IRIX platform. It is completely multi-threaded, can +support large files and large filesystems, extended attributes, +variable block sizes, is extent based, and makes extensive use of +Btrees (directories, extents, free space) to aid both performance +and scalability. + +Refer to the documentation at https://xfs.wiki.kernel.org/ +for further details. This implementation is on-disk compatible +with the IRIX version of XFS. + + +Mount Options +============= + +When mounting an XFS filesystem, the following options are accepted. + + allocsize=size + Sets the buffered I/O end-of-file preallocation size when + doing delayed allocation writeout (default size is 64KiB). + Valid values for this option are page size (typically 4KiB) + through to 1GiB, inclusive, in power-of-2 increments. + + The default behaviour is for dynamic end-of-file + preallocation size, which uses a set of heuristics to + optimise the preallocation size based on the current + allocation patterns within the file and the access patterns + to the file. Specifying a fixed ``allocsize`` value turns off + the dynamic behaviour. + + attr2 or noattr2 + The options enable/disable an "opportunistic" improvement to + be made in the way inline extended attributes are stored + on-disk. When the new form is used for the first time when + ``attr2`` is selected (either when setting or removing extended + attributes) the on-disk superblock feature bit field will be + updated to reflect this format being in use. + + The default behaviour is determined by the on-disk feature + bit indicating that ``attr2`` behaviour is active. If either + mount option is set, then that becomes the new default used + by the filesystem. + + CRC enabled filesystems always use the ``attr2`` format, and so + will reject the ``noattr2`` mount option if it is set. + + discard or nodiscard (default) + Enable/disable the issuing of commands to let the block + device reclaim space freed by the filesystem. This is + useful for SSD devices, thinly provisioned LUNs and virtual + machine images, but may have a performance impact. + + Note: It is currently recommended that you use the ``fstrim`` + application to ``discard`` unused blocks rather than the ``discard`` + mount option because the performance impact of this option + is quite severe. + + grpid/bsdgroups or nogrpid/sysvgroups (default) + These options define what group ID a newly created file + gets. When ``grpid`` is set, it takes the group ID of the + directory in which it is created; otherwise it takes the + ``fsgid`` of the current process, unless the directory has the + ``setgid`` bit set, in which case it takes the ``gid`` from the + parent directory, and also gets the ``setgid`` bit set if it is + a directory itself. + + filestreams + Make the data allocator use the filestreams allocation mode + across the entire filesystem rather than just on directories + configured to use it. + + ikeep or noikeep (default) + When ``ikeep`` is specified, XFS does not delete empty inode + clusters and keeps them around on disk. When ``noikeep`` is + specified, empty inode clusters are returned to the free + space pool. + + inode32 or inode64 (default) + When ``inode32`` is specified, it indicates that XFS limits + inode creation to locations which will not result in inode + numbers with more than 32 bits of significance. + + When ``inode64`` is specified, it indicates that XFS is allowed + to create inodes at any location in the filesystem, + including those which will result in inode numbers occupying + more than 32 bits of significance. + + ``inode32`` is provided for backwards compatibility with older + systems and applications, since 64 bits inode numbers might + cause problems for some applications that cannot handle + large inode numbers. If applications are in use which do + not handle inode numbers bigger than 32 bits, the ``inode32`` + option should be specified. + + largeio or nolargeio (default) + If ``nolargeio`` is specified, the optimal I/O reported in + ``st_blksize`` by **stat(2)** will be as small as possible to allow + user applications to avoid inefficient read/modify/write + I/O. This is typically the page size of the machine, as + this is the granularity of the page cache. + + If ``largeio`` is specified, a filesystem that was created with a + ``swidth`` specified will return the ``swidth`` value (in bytes) + in ``st_blksize``. If the filesystem does not have a ``swidth`` + specified but does specify an ``allocsize`` then ``allocsize`` + (in bytes) will be returned instead. Otherwise the behaviour + is the same as if ``nolargeio`` was specified. + + logbufs=value + Set the number of in-memory log buffers. Valid numbers + range from 2-8 inclusive. + + The default value is 8 buffers. + + If the memory cost of 8 log buffers is too high on small + systems, then it may be reduced at some cost to performance + on metadata intensive workloads. The ``logbsize`` option below + controls the size of each buffer and so is also relevant to + this case. + + logbsize=value + Set the size of each in-memory log buffer. The size may be + specified in bytes, or in kilobytes with a "k" suffix. + Valid sizes for version 1 and version 2 logs are 16384 (16k) + and 32768 (32k). Valid sizes for version 2 logs also + include 65536 (64k), 131072 (128k) and 262144 (256k). The + logbsize must be an integer multiple of the log + stripe unit configured at **mkfs(8)** time. + + The default value for version 1 logs is 32768, while the + default value for version 2 logs is MAX(32768, log_sunit). + + logdev=device and rtdev=device + Use an external log (metadata journal) and/or real-time device. + An XFS filesystem has up to three parts: a data section, a log + section, and a real-time section. The real-time section is + optional, and the log section can be separate from the data + section or contained within it. + + noalign + Data allocations will not be aligned at stripe unit + boundaries. This is only relevant to filesystems created + with non-zero data alignment parameters (``sunit``, ``swidth``) by + **mkfs(8)**. + + norecovery + The filesystem will be mounted without running log recovery. + If the filesystem was not cleanly unmounted, it is likely to + be inconsistent when mounted in ``norecovery`` mode. + Some files or directories may not be accessible because of this. + Filesystems mounted ``norecovery`` must be mounted read-only or + the mount will fail. + + nouuid + Don't check for double mounted file systems using the file + system ``uuid``. This is useful to mount LVM snapshot volumes, + and often used in combination with ``norecovery`` for mounting + read-only snapshots. + + noquota + Forcibly turns off all quota accounting and enforcement + within the filesystem. + + uquota/usrquota/uqnoenforce/quota + User disk quota accounting enabled, and limits (optionally) + enforced. Refer to **xfs_quota(8)** for further details. + + gquota/grpquota/gqnoenforce + Group disk quota accounting enabled and limits (optionally) + enforced. Refer to **xfs_quota(8)** for further details. + + pquota/prjquota/pqnoenforce + Project disk quota accounting enabled and limits (optionally) + enforced. Refer to **xfs_quota(8)** for further details. + + sunit=value and swidth=value + Used to specify the stripe unit and width for a RAID device + or a stripe volume. "value" must be specified in 512-byte + block units. These options are only relevant to filesystems + that were created with non-zero data alignment parameters. + + The ``sunit`` and ``swidth`` parameters specified must be compatible + with the existing filesystem alignment characteristics. In + general, that means the only valid changes to ``sunit`` are + increasing it by a power-of-2 multiple. Valid ``swidth`` values + are any integer multiple of a valid ``sunit`` value. + + Typically the only time these mount options are necessary if + after an underlying RAID device has had it's geometry + modified, such as adding a new disk to a RAID5 lun and + reshaping it. + + swalloc + Data allocations will be rounded up to stripe width boundaries + when the current end of file is being extended and the file + size is larger than the stripe width size. + + wsync + When specified, all filesystem namespace operations are + executed synchronously. This ensures that when the namespace + operation (create, unlink, etc) completes, the change to the + namespace is on stable storage. This is useful in HA setups + where failover must not result in clients seeing + inconsistent namespace presentation during or after a + failover event. + +Deprecation of V4 Format +======================== + +The V4 filesystem format lacks certain features that are supported by +the V5 format, such as metadata checksumming, strengthened metadata +verification, and the ability to store timestamps past the year 2038. +Because of this, the V4 format is deprecated. All users should upgrade +by backing up their files, reformatting, and restoring from the backup. + +Administrators and users can detect a V4 filesystem by running xfs_info +against a filesystem mountpoint and checking for a string containing +"crc=". If no such string is found, please upgrade xfsprogs to the +latest version and try again. + +The deprecation will take place in two parts. Support for mounting V4 +filesystems can now be disabled at kernel build time via Kconfig option. +The option will default to yes until September 2025, at which time it +will be changed to default to no. In September 2030, support will be +removed from the codebase entirely. + +Note: Distributors may choose to withdraw V4 format support earlier than +the dates listed above. + +Deprecated Mount Options +======================== + +=========================== ================ + Name Removal Schedule +=========================== ================ +Mounting with V4 filesystem September 2030 +ikeep/noikeep September 2025 +attr2/noattr2 September 2025 +=========================== ================ + + +Removed Mount Options +===================== + +=========================== ======= + Name Removed +=========================== ======= + delaylog/nodelaylog v4.0 + ihashsize v4.0 + irixsgid v4.0 + osyncisdsync/osyncisosync v4.0 + barrier v4.19 + nobarrier v4.19 +=========================== ======= + +sysctls +======= + +The following sysctls are available for the XFS filesystem: + + fs.xfs.stats_clear (Min: 0 Default: 0 Max: 1) + Setting this to "1" clears accumulated XFS statistics + in /proc/fs/xfs/stat. It then immediately resets to "0". + + fs.xfs.xfssyncd_centisecs (Min: 100 Default: 3000 Max: 720000) + The interval at which the filesystem flushes metadata + out to disk and runs internal cache cleanup routines. + + fs.xfs.filestream_centisecs (Min: 1 Default: 3000 Max: 360000) + The interval at which the filesystem ages filestreams cache + references and returns timed-out AGs back to the free stream + pool. + + fs.xfs.speculative_prealloc_lifetime + (Units: seconds Min: 1 Default: 300 Max: 86400) + The interval at which the background scanning for inodes + with unused speculative preallocation runs. The scan + removes unused preallocation from clean inodes and releases + the unused space back to the free pool. + + fs.xfs.error_level (Min: 0 Default: 3 Max: 11) + A volume knob for error reporting when internal errors occur. + This will generate detailed messages & backtraces for filesystem + shutdowns, for example. Current threshold values are: + + XFS_ERRLEVEL_OFF: 0 + XFS_ERRLEVEL_LOW: 1 + XFS_ERRLEVEL_HIGH: 5 + + fs.xfs.panic_mask (Min: 0 Default: 0 Max: 256) + Causes certain error conditions to call BUG(). Value is a bitmask; + OR together the tags which represent errors which should cause panics: + + XFS_NO_PTAG 0 + XFS_PTAG_IFLUSH 0x00000001 + XFS_PTAG_LOGRES 0x00000002 + XFS_PTAG_AILDELETE 0x00000004 + XFS_PTAG_ERROR_REPORT 0x00000008 + XFS_PTAG_SHUTDOWN_CORRUPT 0x00000010 + XFS_PTAG_SHUTDOWN_IOERROR 0x00000020 + XFS_PTAG_SHUTDOWN_LOGERROR 0x00000040 + XFS_PTAG_FSBLOCK_ZERO 0x00000080 + XFS_PTAG_VERIFIER_ERROR 0x00000100 + + This option is intended for debugging only. + + fs.xfs.irix_symlink_mode (Min: 0 Default: 0 Max: 1) + Controls whether symlinks are created with mode 0777 (default) + or whether their mode is affected by the umask (irix mode). + + fs.xfs.irix_sgid_inherit (Min: 0 Default: 0 Max: 1) + Controls files created in SGID directories. + If the group ID of the new file does not match the effective group + ID or one of the supplementary group IDs of the parent dir, the + ISGID bit is cleared if the irix_sgid_inherit compatibility sysctl + is set. + + fs.xfs.inherit_sync (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "sync" flag set + by the **xfs_io(8)** chattr command on a directory to be + inherited by files in that directory. + + fs.xfs.inherit_nodump (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "nodump" flag set + by the **xfs_io(8)** chattr command on a directory to be + inherited by files in that directory. + + fs.xfs.inherit_noatime (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "noatime" flag set + by the **xfs_io(8)** chattr command on a directory to be + inherited by files in that directory. + + fs.xfs.inherit_nosymlinks (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "nosymlinks" flag set + by the **xfs_io(8)** chattr command on a directory to be + inherited by files in that directory. + + fs.xfs.inherit_nodefrag (Min: 0 Default: 1 Max: 1) + Setting this to "1" will cause the "nodefrag" flag set + by the **xfs_io(8)** chattr command on a directory to be + inherited by files in that directory. + + fs.xfs.rotorstep (Min: 1 Default: 1 Max: 256) + In "inode32" allocation mode, this option determines how many + files the allocator attempts to allocate in the same allocation + group before moving to the next allocation group. The intent + is to control the rate at which the allocator moves between + allocation groups when allocating extents for new files. + +Deprecated Sysctls +================== + +=========================== ================ + Name Removal Schedule +=========================== ================ +fs.xfs.irix_sgid_inherit September 2025 +fs.xfs.irix_symlink_mode September 2025 +=========================== ================ + + +Removed Sysctls +=============== + +============================= ======= + Name Removed +============================= ======= + fs.xfs.xfsbufd_centisec v4.0 + fs.xfs.age_buffer_centisecs v4.0 +============================= ======= + +Error handling +============== + +XFS can act differently according to the type of error found during its +operation. The implementation introduces the following concepts to the error +handler: + + -failure speed: + Defines how fast XFS should propagate an error upwards when a specific + error is found during the filesystem operation. It can propagate + immediately, after a defined number of retries, after a set time period, + or simply retry forever. + + -error classes: + Specifies the subsystem the error configuration will apply to, such as + metadata IO or memory allocation. Different subsystems will have + different error handlers for which behaviour can be configured. + + -error handlers: + Defines the behavior for a specific error. + +The filesystem behavior during an error can be set via ``sysfs`` files. Each +error handler works independently - the first condition met by an error handler +for a specific class will cause the error to be propagated rather than reset and +retried. + +The action taken by the filesystem when the error is propagated is context +dependent - it may cause a shut down in the case of an unrecoverable error, +it may be reported back to userspace, or it may even be ignored because +there's nothing useful we can with the error or anyone we can report it to (e.g. +during unmount). + +The configuration files are organized into the following hierarchy for each +mounted filesystem: + + /sys/fs/xfs/<dev>/error/<class>/<error>/ + +Where: + <dev> + The short device name of the mounted filesystem. This is the same device + name that shows up in XFS kernel error messages as "XFS(<dev>): ..." + + <class> + The subsystem the error configuration belongs to. As of 4.9, the defined + classes are: + + - "metadata": applies metadata buffer write IO + + <error> + The individual error handler configurations. + + +Each filesystem has "global" error configuration options defined in their top +level directory: + + /sys/fs/xfs/<dev>/error/ + + fail_at_unmount (Min: 0 Default: 1 Max: 1) + Defines the filesystem error behavior at unmount time. + + If set to a value of 1, XFS will override all other error configurations + during unmount and replace them with "immediate fail" characteristics. + i.e. no retries, no retry timeout. This will always allow unmount to + succeed when there are persistent errors present. + + If set to 0, the configured retry behaviour will continue until all + retries and/or timeouts have been exhausted. This will delay unmount + completion when there are persistent errors, and it may prevent the + filesystem from ever unmounting fully in the case of "retry forever" + handler configurations. + + Note: there is no guarantee that fail_at_unmount can be set while an + unmount is in progress. It is possible that the ``sysfs`` entries are + removed by the unmounting filesystem before a "retry forever" error + handler configuration causes unmount to hang, and hence the filesystem + must be configured appropriately before unmount begins to prevent + unmount hangs. + +Each filesystem has specific error class handlers that define the error +propagation behaviour for specific errors. There is also a "default" error +handler defined, which defines the behaviour for all errors that don't have +specific handlers defined. Where multiple retry constraints are configured for +a single error, the first retry configuration that expires will cause the error +to be propagated. The handler configurations are found in the directory: + + /sys/fs/xfs/<dev>/error/<class>/<error>/ + + max_retries (Min: -1 Default: Varies Max: INTMAX) + Defines the allowed number of retries of a specific error before + the filesystem will propagate the error. The retry count for a given + error context (e.g. a specific metadata buffer) is reset every time + there is a successful completion of the operation. + + Setting the value to "-1" will cause XFS to retry forever for this + specific error. + + Setting the value to "0" will cause XFS to fail immediately when the + specific error is reported. + + Setting the value to "N" (where 0 < N < Max) will make XFS retry the + operation "N" times before propagating the error. + + retry_timeout_seconds (Min: -1 Default: Varies Max: 1 day) + Define the amount of time (in seconds) that the filesystem is + allowed to retry its operations when the specific error is + found. + + Setting the value to "-1" will allow XFS to retry forever for this + specific error. + + Setting the value to "0" will cause XFS to fail immediately when the + specific error is reported. + + Setting the value to "N" (where 0 < N < Max) will allow XFS to retry the + operation for up to "N" seconds before propagating the error. + +**Note:** The default behaviour for a specific error handler is dependent on both +the class and error context. For example, the default values for +"metadata/ENODEV" are "0" rather than "-1" so that this error handler defaults +to "fail immediately" behaviour. This is done because ENODEV is a fatal, +unrecoverable error no matter how many times the metadata IO is retried. |