summaryrefslogtreecommitdiffstats
path: root/Documentation/block/queue-sysfs.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/block/queue-sysfs.rst')
-rw-r--r--Documentation/block/queue-sysfs.rst276
1 files changed, 276 insertions, 0 deletions
diff --git a/Documentation/block/queue-sysfs.rst b/Documentation/block/queue-sysfs.rst
new file mode 100644
index 000000000..2638d3446
--- /dev/null
+++ b/Documentation/block/queue-sysfs.rst
@@ -0,0 +1,276 @@
+=================
+Queue sysfs files
+=================
+
+This text file will detail the queue files that are located in the sysfs tree
+for each block device. Note that stacked devices typically do not export
+any settings, since their queue merely functions are a remapping target.
+These files are the ones found in the /sys/block/xxx/queue/ directory.
+
+Files denoted with a RO postfix are readonly and the RW postfix means
+read-write.
+
+add_random (RW)
+---------------
+This file allows to turn off the disk entropy contribution. Default
+value of this file is '1'(on).
+
+chunk_sectors (RO)
+------------------
+This has different meaning depending on the type of the block device.
+For a RAID device (dm-raid), chunk_sectors indicates the size in 512B sectors
+of the RAID volume stripe segment. For a zoned block device, either host-aware
+or host-managed, chunk_sectors indicates the size in 512B sectors of the zones
+of the device, with the eventual exception of the last zone of the device which
+may be smaller.
+
+dax (RO)
+--------
+This file indicates whether the device supports Direct Access (DAX),
+used by CPU-addressable storage to bypass the pagecache. It shows '1'
+if true, '0' if not.
+
+discard_granularity (RO)
+------------------------
+This shows the size of internal allocation of the device in bytes, if
+reported by the device. A value of '0' means device does not support
+the discard functionality.
+
+discard_max_hw_bytes (RO)
+-------------------------
+Devices that support discard functionality may have internal limits on
+the number of bytes that can be trimmed or unmapped in a single operation.
+The discard_max_bytes parameter is set by the device driver to the maximum
+number of bytes that can be discarded in a single operation. Discard
+requests issued to the device must not exceed this limit. A discard_max_bytes
+value of 0 means that the device does not support discard functionality.
+
+discard_max_bytes (RW)
+----------------------
+While discard_max_hw_bytes is the hardware limit for the device, this
+setting is the software limit. Some devices exhibit large latencies when
+large discards are issued, setting this value lower will make Linux issue
+smaller discards and potentially help reduce latencies induced by large
+discard operations.
+
+discard_zeroes_data (RO)
+------------------------
+Obsolete. Always zero.
+
+fua (RO)
+--------
+Whether or not the block driver supports the FUA flag for write requests.
+FUA stands for Force Unit Access. If the FUA flag is set that means that
+write requests must bypass the volatile cache of the storage device.
+
+hw_sector_size (RO)
+-------------------
+This is the hardware sector size of the device, in bytes.
+
+io_poll (RW)
+------------
+When read, this file shows whether polling is enabled (1) or disabled
+(0). Writing '0' to this file will disable polling for this device.
+Writing any non-zero value will enable this feature.
+
+io_poll_delay (RW)
+------------------
+If polling is enabled, this controls what kind of polling will be
+performed. It defaults to -1, which is classic polling. In this mode,
+the CPU will repeatedly ask for completions without giving up any time.
+If set to 0, a hybrid polling mode is used, where the kernel will attempt
+to make an educated guess at when the IO will complete. Based on this
+guess, the kernel will put the process issuing IO to sleep for an amount
+of time, before entering a classic poll loop. This mode might be a
+little slower than pure classic polling, but it will be more efficient.
+If set to a value larger than 0, the kernel will put the process issuing
+IO to sleep for this amount of microseconds before entering classic
+polling.
+
+io_timeout (RW)
+---------------
+io_timeout is the request timeout in milliseconds. If a request does not
+complete in this time then the block driver timeout handler is invoked.
+That timeout handler can decide to retry the request, to fail it or to start
+a device recovery strategy.
+
+iostats (RW)
+-------------
+This file is used to control (on/off) the iostats accounting of the
+disk.
+
+logical_block_size (RO)
+-----------------------
+This is the logical block size of the device, in bytes.
+
+max_discard_segments (RO)
+-------------------------
+The maximum number of DMA scatter/gather entries in a discard request.
+
+max_hw_sectors_kb (RO)
+----------------------
+This is the maximum number of kilobytes supported in a single data transfer.
+
+max_integrity_segments (RO)
+---------------------------
+Maximum number of elements in a DMA scatter/gather list with integrity
+data that will be submitted by the block layer core to the associated
+block driver.
+
+max_active_zones (RO)
+---------------------
+For zoned block devices (zoned attribute indicating "host-managed" or
+"host-aware"), the sum of zones belonging to any of the zone states:
+EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value.
+If this value is 0, there is no limit.
+
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW
+errno.
+
+max_open_zones (RO)
+-------------------
+For zoned block devices (zoned attribute indicating "host-managed" or
+"host-aware"), the sum of zones belonging to any of the zone states:
+EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value.
+If this value is 0, there is no limit.
+
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_OPEN_RESOURCE, which user space may see as the ETOOMANYREFS
+errno.
+
+max_sectors_kb (RW)
+-------------------
+This is the maximum number of kilobytes that the block layer will allow
+for a filesystem request. Must be smaller than or equal to the maximum
+size allowed by the hardware.
+
+max_segments (RO)
+-----------------
+Maximum number of elements in a DMA scatter/gather list that is submitted
+to the associated block driver.
+
+max_segment_size (RO)
+---------------------
+Maximum size in bytes of a single element in a DMA scatter/gather list.
+
+minimum_io_size (RO)
+--------------------
+This is the smallest preferred IO size reported by the device.
+
+nomerges (RW)
+-------------
+This enables the user to disable the lookup logic involved with IO
+merging requests in the block layer. By default (0) all merges are
+enabled. When set to 1 only simple one-hit merges will be tried. When
+set to 2 no merge algorithms will be tried (including one-hit or more
+complex tree/hash lookups).
+
+nr_requests (RW)
+----------------
+This controls how many requests may be allocated in the block layer for
+read or write requests. Note that the total allocated number may be twice
+this amount, since it applies only to reads or writes (not the accumulated
+sum).
+
+To avoid priority inversion through request starvation, a request
+queue maintains a separate request pool per each cgroup when
+CONFIG_BLK_CGROUP is enabled, and this parameter applies to each such
+per-block-cgroup request pool. IOW, if there are N block cgroups,
+each request queue may have up to N request pools, each independently
+regulated by nr_requests.
+
+nr_zones (RO)
+-------------
+For zoned block devices (zoned attribute indicating "host-managed" or
+"host-aware"), this indicates the total number of zones of the device.
+This is always 0 for regular block devices.
+
+optimal_io_size (RO)
+--------------------
+This is the optimal IO size reported by the device.
+
+physical_block_size (RO)
+------------------------
+This is the physical block size of device, in bytes.
+
+read_ahead_kb (RW)
+------------------
+Maximum number of kilobytes to read-ahead for filesystems on this block
+device.
+
+rotational (RW)
+---------------
+This file is used to stat if the device is of rotational type or
+non-rotational type.
+
+rq_affinity (RW)
+----------------
+If this option is '1', the block layer will migrate request completions to the
+cpu "group" that originally submitted the request. For some workloads this
+provides a significant reduction in CPU cycles due to caching effects.
+
+For storage configurations that need to maximize distribution of completion
+processing setting this option to '2' forces the completion to run on the
+requesting cpu (bypassing the "group" aggregation logic).
+
+scheduler (RW)
+--------------
+When read, this file will display the current and available IO schedulers
+for this block device. The currently active IO scheduler will be enclosed
+in [] brackets. Writing an IO scheduler name to this file will switch
+control of this block device to that new IO scheduler. Note that writing
+an IO scheduler name to this file will attempt to load that IO scheduler
+module, if it isn't already present in the system.
+
+write_cache (RW)
+----------------
+When read, this file will display whether the device has write back
+caching enabled or not. It will return "write back" for the former
+case, and "write through" for the latter. Writing to this file can
+change the kernels view of the device, but it doesn't alter the
+device state. This means that it might not be safe to toggle the
+setting from "write back" to "write through", since that will also
+eliminate cache flushes issued by the kernel.
+
+write_same_max_bytes (RO)
+-------------------------
+This is the number of bytes the device can write in a single write-same
+command. A value of '0' means write-same is not supported by this
+device.
+
+wbt_lat_usec (RW)
+-----------------
+If the device is registered for writeback throttling, then this file shows
+the target minimum read latency. If this latency is exceeded in a given
+window of time (see wb_window_usec), then the writeback throttling will start
+scaling back writes. Writing a value of '0' to this file disables the
+feature. Writing a value of '-1' to this file resets the value to the
+default setting.
+
+throttle_sample_time (RW)
+-------------------------
+This is the time window that blk-throttle samples data, in millisecond.
+blk-throttle makes decision based on the samplings. Lower time means cgroups
+have more smooth throughput, but higher CPU overhead. This exists only when
+CONFIG_BLK_DEV_THROTTLING_LOW is enabled.
+
+write_zeroes_max_bytes (RO)
+---------------------------
+For block drivers that support REQ_OP_WRITE_ZEROES, the maximum number of
+bytes that can be zeroed at once. The value 0 means that REQ_OP_WRITE_ZEROES
+is not supported.
+
+zoned (RO)
+----------
+This indicates if the device is a zoned block device and the zone model of the
+device if it is indeed zoned. The possible values indicated by zoned are
+"none" for regular block devices and "host-aware" or "host-managed" for zoned
+block devices. The characteristics of host-aware and host-managed zoned block
+devices are described in the ZBC (Zoned Block Commands) and ZAC
+(Zoned Device ATA Command Set) standards. These standards also define the
+"drive-managed" zone model. However, since drive-managed zoned block devices
+do not support zone commands, they will be treated as regular block devices
+and zoned will report "none".
+
+Jens Axboe <jens.axboe@oracle.com>, February 2009