diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/dev-tools/kasan.rst | 355 |
1 files changed, 355 insertions, 0 deletions
diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst new file mode 100644 index 000000000..2b68addaa --- /dev/null +++ b/Documentation/dev-tools/kasan.rst @@ -0,0 +1,355 @@ +The Kernel Address Sanitizer (KASAN) +==================================== + +Overview +-------- + +KernelAddressSANitizer (KASAN) is a dynamic memory error detector designed to +find out-of-bound and use-after-free bugs. KASAN has two modes: generic KASAN +(similar to userspace ASan) and software tag-based KASAN (similar to userspace +HWASan). + +KASAN uses compile-time instrumentation to insert validity checks before every +memory access, and therefore requires a compiler version that supports that. + +Generic KASAN is supported in both GCC and Clang. With GCC it requires version +8.3.0 or later. Any supported Clang version is compatible, but detection of +out-of-bounds accesses for global variables is only supported since Clang 11. + +Tag-based KASAN is only supported in Clang. + +Currently generic KASAN is supported for the x86_64, arm64, xtensa, s390 and +riscv architectures, and tag-based KASAN is supported only for arm64. + +Usage +----- + +To enable KASAN configure kernel with:: + + CONFIG_KASAN = y + +and choose between CONFIG_KASAN_GENERIC (to enable generic KASAN) and +CONFIG_KASAN_SW_TAGS (to enable software tag-based KASAN). + +You also need to choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. +Outline and inline are compiler instrumentation types. The former produces +smaller binary while the latter is 1.1 - 2 times faster. + +Both KASAN modes work with both SLUB and SLAB memory allocators. +For better bug detection and nicer reporting, enable CONFIG_STACKTRACE. + +To augment reports with last allocation and freeing stack of the physical page, +it is recommended to enable also CONFIG_PAGE_OWNER and boot with page_owner=on. + +To disable instrumentation for specific files or directories, add a line +similar to the following to the respective kernel Makefile: + +- For a single file (e.g. main.o):: + + KASAN_SANITIZE_main.o := n + +- For all files in one directory:: + + KASAN_SANITIZE := n + +Error reports +~~~~~~~~~~~~~ + +A typical out-of-bounds access generic KASAN report looks like this:: + + ================================================================== + BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan] + Write of size 1 at addr ffff8801f44ec37b by task insmod/2760 + + CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698 + Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 + Call Trace: + dump_stack+0x94/0xd8 + print_address_description+0x73/0x280 + kasan_report+0x144/0x187 + __asan_report_store1_noabort+0x17/0x20 + kmalloc_oob_right+0xa8/0xbc [test_kasan] + kmalloc_tests_init+0x16/0x700 [test_kasan] + do_one_initcall+0xa5/0x3ae + do_init_module+0x1b6/0x547 + load_module+0x75df/0x8070 + __do_sys_init_module+0x1c6/0x200 + __x64_sys_init_module+0x6e/0xb0 + do_syscall_64+0x9f/0x2c0 + entry_SYSCALL_64_after_hwframe+0x44/0xa9 + RIP: 0033:0x7f96443109da + RSP: 002b:00007ffcf0b51b08 EFLAGS: 00000202 ORIG_RAX: 00000000000000af + RAX: ffffffffffffffda RBX: 000055dc3ee521a0 RCX: 00007f96443109da + RDX: 00007f96445cff88 RSI: 0000000000057a50 RDI: 00007f9644992000 + RBP: 000055dc3ee510b0 R08: 0000000000000003 R09: 0000000000000000 + R10: 00007f964430cd0a R11: 0000000000000202 R12: 00007f96445cff88 + R13: 000055dc3ee51090 R14: 0000000000000000 R15: 0000000000000000 + + Allocated by task 2760: + save_stack+0x43/0xd0 + kasan_kmalloc+0xa7/0xd0 + kmem_cache_alloc_trace+0xe1/0x1b0 + kmalloc_oob_right+0x56/0xbc [test_kasan] + kmalloc_tests_init+0x16/0x700 [test_kasan] + do_one_initcall+0xa5/0x3ae + do_init_module+0x1b6/0x547 + load_module+0x75df/0x8070 + __do_sys_init_module+0x1c6/0x200 + __x64_sys_init_module+0x6e/0xb0 + do_syscall_64+0x9f/0x2c0 + entry_SYSCALL_64_after_hwframe+0x44/0xa9 + + Freed by task 815: + save_stack+0x43/0xd0 + __kasan_slab_free+0x135/0x190 + kasan_slab_free+0xe/0x10 + kfree+0x93/0x1a0 + umh_complete+0x6a/0xa0 + call_usermodehelper_exec_async+0x4c3/0x640 + ret_from_fork+0x35/0x40 + + The buggy address belongs to the object at ffff8801f44ec300 + which belongs to the cache kmalloc-128 of size 128 + The buggy address is located 123 bytes inside of + 128-byte region [ffff8801f44ec300, ffff8801f44ec380) + The buggy address belongs to the page: + page:ffffea0007d13b00 count:1 mapcount:0 mapping:ffff8801f7001640 index:0x0 + flags: 0x200000000000100(slab) + raw: 0200000000000100 ffffea0007d11dc0 0000001a0000001a ffff8801f7001640 + raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 + page dumped because: kasan: bad access detected + + Memory state around the buggy address: + ffff8801f44ec200: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb + ffff8801f44ec280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc + >ffff8801f44ec300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 + ^ + ffff8801f44ec380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb + ffff8801f44ec400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc + ================================================================== + +The header of the report provides a short summary of what kind of bug happened +and what kind of access caused it. It's followed by a stack trace of the bad +access, a stack trace of where the accessed memory was allocated (in case bad +access happens on a slab object), and a stack trace of where the object was +freed (in case of a use-after-free bug report). Next comes a description of +the accessed slab object and information about the accessed memory page. + +In the last section the report shows memory state around the accessed address. +Reading this part requires some understanding of how KASAN works. + +The state of each 8 aligned bytes of memory is encoded in one shadow byte. +Those 8 bytes can be accessible, partially accessible, freed or be a redzone. +We use the following encoding for each shadow byte: 0 means that all 8 bytes +of the corresponding memory region are accessible; number N (1 <= N <= 7) means +that the first N bytes are accessible, and other (8 - N) bytes are not; +any negative value indicates that the entire 8-byte word is inaccessible. +We use different negative values to distinguish between different kinds of +inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h). + +In the report above the arrows point to the shadow byte 03, which means that +the accessed address is partially accessible. + +For tag-based KASAN this last report section shows the memory tags around the +accessed address (see Implementation details section). + + +Implementation details +---------------------- + +Generic KASAN +~~~~~~~~~~~~~ + +From a high level, our approach to memory error detection is similar to that +of kmemcheck: use shadow memory to record whether each byte of memory is safe +to access, and use compile-time instrumentation to insert checks of shadow +memory on each memory access. + +Generic KASAN dedicates 1/8th of kernel memory to its shadow memory (e.g. 16TB +to cover 128TB on x86_64) and uses direct mapping with a scale and offset to +translate a memory address to its corresponding shadow address. + +Here is the function which translates an address to its corresponding shadow +address:: + + static inline void *kasan_mem_to_shadow(const void *addr) + { + return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT) + + KASAN_SHADOW_OFFSET; + } + +where ``KASAN_SHADOW_SCALE_SHIFT = 3``. + +Compile-time instrumentation is used to insert memory access checks. Compiler +inserts function calls (__asan_load*(addr), __asan_store*(addr)) before each +memory access of size 1, 2, 4, 8 or 16. These functions check whether memory +access is valid or not by checking corresponding shadow memory. + +GCC 5.0 has possibility to perform inline instrumentation. Instead of making +function calls GCC directly inserts the code to check the shadow memory. +This option significantly enlarges kernel but it gives x1.1-x2 performance +boost over outline instrumented kernel. + +Generic KASAN prints up to 2 call_rcu() call stacks in reports, the last one +and the second to last. + +Software tag-based KASAN +~~~~~~~~~~~~~~~~~~~~~~~~ + +Tag-based KASAN uses the Top Byte Ignore (TBI) feature of modern arm64 CPUs to +store a pointer tag in the top byte of kernel pointers. Like generic KASAN it +uses shadow memory to store memory tags associated with each 16-byte memory +cell (therefore it dedicates 1/16th of the kernel memory for shadow memory). + +On each memory allocation tag-based KASAN generates a random tag, tags the +allocated memory with this tag, and embeds this tag into the returned pointer. +Software tag-based KASAN uses compile-time instrumentation to insert checks +before each memory access. These checks make sure that tag of the memory that +is being accessed is equal to tag of the pointer that is used to access this +memory. In case of a tag mismatch tag-based KASAN prints a bug report. + +Software tag-based KASAN also has two instrumentation modes (outline, that +emits callbacks to check memory accesses; and inline, that performs the shadow +memory checks inline). With outline instrumentation mode, a bug report is +simply printed from the function that performs the access check. With inline +instrumentation a brk instruction is emitted by the compiler, and a dedicated +brk handler is used to print bug reports. + +A potential expansion of this mode is a hardware tag-based mode, which would +use hardware memory tagging support instead of compiler instrumentation and +manual shadow memory manipulation. + +What memory accesses are sanitised by KASAN? +-------------------------------------------- + +The kernel maps memory in a number of different parts of the address +space. This poses something of a problem for KASAN, which requires +that all addresses accessed by instrumented code have a valid shadow +region. + +The range of kernel virtual addresses is large: there is not enough +real memory to support a real shadow region for every address that +could be accessed by the kernel. + +By default +~~~~~~~~~~ + +By default, architectures only map real memory over the shadow region +for the linear mapping (and potentially other small areas). For all +other areas - such as vmalloc and vmemmap space - a single read-only +page is mapped over the shadow area. This read-only shadow page +declares all memory accesses as permitted. + +This presents a problem for modules: they do not live in the linear +mapping, but in a dedicated module space. By hooking in to the module +allocator, KASAN can temporarily map real shadow memory to cover +them. This allows detection of invalid accesses to module globals, for +example. + +This also creates an incompatibility with ``VMAP_STACK``: if the stack +lives in vmalloc space, it will be shadowed by the read-only page, and +the kernel will fault when trying to set up the shadow data for stack +variables. + +CONFIG_KASAN_VMALLOC +~~~~~~~~~~~~~~~~~~~~ + +With ``CONFIG_KASAN_VMALLOC``, KASAN can cover vmalloc space at the +cost of greater memory usage. Currently this is only supported on x86. + +This works by hooking into vmalloc and vmap, and dynamically +allocating real shadow memory to back the mappings. + +Most mappings in vmalloc space are small, requiring less than a full +page of shadow space. Allocating a full shadow page per mapping would +therefore be wasteful. Furthermore, to ensure that different mappings +use different shadow pages, mappings would have to be aligned to +``KASAN_SHADOW_SCALE_SIZE * PAGE_SIZE``. + +Instead, we share backing space across multiple mappings. We allocate +a backing page when a mapping in vmalloc space uses a particular page +of the shadow region. This page can be shared by other vmalloc +mappings later on. + +We hook in to the vmap infrastructure to lazily clean up unused shadow +memory. + +To avoid the difficulties around swapping mappings around, we expect +that the part of the shadow region that covers the vmalloc space will +not be covered by the early shadow page, but will be left +unmapped. This will require changes in arch-specific code. + +This allows ``VMAP_STACK`` support on x86, and can simplify support of +architectures that do not have a fixed module region. + +CONFIG_KASAN_KUNIT_TEST & CONFIG_TEST_KASAN_MODULE +-------------------------------------------------- + +``CONFIG_KASAN_KUNIT_TEST`` utilizes the KUnit Test Framework for testing. +This means each test focuses on a small unit of functionality and +there are a few ways these tests can be run. + +Each test will print the KASAN report if an error is detected and then +print the number of the test and the status of the test: + +pass:: + + ok 28 - kmalloc_double_kzfree + +or, if kmalloc failed:: + + # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163 + Expected ptr is not null, but is + not ok 4 - kmalloc_large_oob_right + +or, if a KASAN report was expected, but not found:: + + # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:629 + Expected kasan_data->report_expected == kasan_data->report_found, but + kasan_data->report_expected == 1 + kasan_data->report_found == 0 + not ok 28 - kmalloc_double_kzfree + +All test statuses are tracked as they run and an overall status will +be printed at the end:: + + ok 1 - kasan + +or:: + + not ok 1 - kasan + +(1) Loadable Module +~~~~~~~~~~~~~~~~~~~~ + +With ``CONFIG_KUNIT`` enabled, ``CONFIG_KASAN_KUNIT_TEST`` can be built as +a loadable module and run on any architecture that supports KASAN +using something like insmod or modprobe. The module is called ``test_kasan``. + +(2) Built-In +~~~~~~~~~~~~~ + +With ``CONFIG_KUNIT`` built-in, ``CONFIG_KASAN_KUNIT_TEST`` can be built-in +on any architecure that supports KASAN. These and any other KUnit +tests enabled will run and print the results at boot as a late-init +call. + +(3) Using kunit_tool +~~~~~~~~~~~~~~~~~~~~~ + +With ``CONFIG_KUNIT`` and ``CONFIG_KASAN_KUNIT_TEST`` built-in, we can also +use kunit_tool to see the results of these along with other KUnit +tests in a more readable way. This will not print the KASAN reports +of tests that passed. Use `KUnit documentation <https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html>`_ for more up-to-date +information on kunit_tool. + +.. _KUnit: https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html + +``CONFIG_TEST_KASAN_MODULE`` is a set of KASAN tests that could not be +converted to KUnit. These tests can be run only as a module with +``CONFIG_TEST_KASAN_MODULE`` built as a loadable module and +``CONFIG_KASAN`` built-in. The type of error expected and the +function being run is printed before the expression expected to give +an error. Then the error is printed, if found, and that test +should be interpretted to pass only if the error was the one expected +by the test. |