summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/arm/secure.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/arm/secure.txt70
1 files changed, 70 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/secure.txt b/Documentation/devicetree/bindings/arm/secure.txt
new file mode 100644
index 000000000..f27bbff2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/secure.txt
@@ -0,0 +1,70 @@
+* ARM Secure world bindings
+
+ARM CPUs with TrustZone support have two distinct address spaces,
+"Normal" and "Secure". Most devicetree consumers (including the Linux
+kernel) are not TrustZone aware and run entirely in either the Normal
+world or the Secure world. However some devicetree consumers are
+TrustZone aware and need to be able to determine whether devices are
+visible only in the Secure address space, only in the Normal address
+space, or visible in both. (One example of that situation would be a
+virtual machine which boots Secure firmware and wants to tell the
+firmware about the layout of the machine via devicetree.)
+
+The general principle of the naming scheme for Secure world bindings
+is that any property that needs a different value in the Secure world
+can be supported by prefixing the property name with "secure-". So for
+instance "secure-foo" would override "foo". For property names with
+a vendor prefix, the Secure variant of "vendor,foo" would be
+"vendor,secure-foo". If there is no "secure-" property then the Secure
+world value is the same as specified for the Normal world by the
+non-prefixed property. However, only the properties listed below may
+validly have "secure-" versions; this list will be enlarged on a
+case-by-case basis.
+
+Defining the bindings in this way means that a device tree which has
+been annotated to indicate the presence of Secure-only devices can
+still be processed unmodified by existing Non-secure software (and in
+particular by the kernel).
+
+Note that it is still valid for bindings intended for purely Secure
+world consumers (like kernels that run entirely in Secure) to simply
+describe the view of Secure world using the standard bindings. These
+secure- bindings only need to be used where both the Secure and Normal
+world views need to be described in a single device tree.
+
+Valid Secure world properties
+-----------------------------
+
+- secure-status : specifies whether the device is present and usable
+ in the secure world. The combination of this with "status" allows
+ the various possible combinations of device visibility to be
+ specified. If "secure-status" is not specified it defaults to the
+ same value as "status"; if "status" is not specified either then
+ both default to "okay". This means the following combinations are
+ possible:
+
+ /* Neither specified: default to visible in both S and NS */
+ secure-status = "okay"; /* visible in both */
+ status = "okay"; /* visible in both */
+ status = "okay"; secure-status = "okay"; /* visible in both */
+ secure-status = "disabled"; /* NS-only */
+ status = "okay"; secure-status = "disabled"; /* NS-only */
+ status = "disabled"; secure-status = "okay"; /* S-only */
+ status = "disabled"; /* disabled in both */
+ status = "disabled"; secure-status = "disabled"; /* disabled in both */
+
+The secure-chosen node
+----------------------
+
+Similar to the /chosen node which serves as a place for passing data
+between firmware and the operating system, the /secure-chosen node may
+be used to pass data to the Secure OS. Only the properties defined
+below may appear in the /secure-chosen node.
+
+- stdout-path : specifies the device to be used by the Secure OS for
+ its console output. The syntax is the same as for /chosen/stdout-path.
+ If the /secure-chosen node exists but the stdout-path property is not
+ present, the Secure OS should not perform any console output. If
+ /secure-chosen does not exist, the Secure OS should use the value of
+ /chosen/stdout-path instead (that is, use the same device as the
+ Normal world OS).