diff options
Diffstat (limited to '')
3 files changed, 131 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt new file mode 100644 index 000000000..e28e2aac4 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt @@ -0,0 +1,18 @@ +ARM Versatile Character LCD +----------------------------------------------------- +This binding defines the character LCD interface found on ARM Versatile AB +and PB reference platforms. + +Required properties: +- compatible : "arm,versatile-clcd" +- reg : Location and size of character LCD registers + +Optional properties: +- interrupts - single interrupt for character LCD. The character LCD can + operate in polled mode without an interrupt. + +Example: + lcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml new file mode 100644 index 000000000..9222b06e9 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/auxdisplay/hit,hd44780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hitachi HD44780 Character LCD Controller + +maintainers: + - Geert Uytterhoeven <geert@linux-m68k.org> + +description: + The Hitachi HD44780 Character LCD Controller is commonly used on character + LCDs that can display one or more lines of text. It exposes an M6800 bus + interface, which can be used in either 4-bit or 8-bit mode. + +properties: + compatible: + const: hit,hd44780 + + data-gpios: + description: + GPIO pins connected to the data signal lines DB0-DB7 (8-bit mode) or + DB4-DB7 (4-bit mode) of the LCD Controller's bus interface. + oneOf: + - maxItems: 4 + - maxItems: 8 + + enable-gpios: + description: + GPIO pin connected to the "E" (Enable) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + rs-gpios: + description: + GPIO pin connected to the "RS" (Register Select) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + rw-gpios: + description: + GPIO pin connected to the "RW" (Read/Write) signal line of the LCD + Controller's bus interface. + maxItems: 1 + + backlight-gpios: + description: GPIO pin used for enabling the LCD's backlight. + maxItems: 1 + + display-height-chars: + description: Height of the display, in character cells, + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + + display-width-chars: + description: Width of the display, in character cells. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 64 + + internal-buffer-width: + description: + Internal buffer width (default is 40 for displays with 1 or 2 lines, and + display-width-chars for displays with more than 2 lines). + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 64 + +required: + - compatible + - data-gpios + - enable-gpios + - rs-gpios + - display-height-chars + - display-width-chars + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + auxdisplay { + compatible = "hit,hd44780"; + + data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>, + <&hc595 1 GPIO_ACTIVE_HIGH>, + <&hc595 2 GPIO_ACTIVE_HIGH>, + <&hc595 3 GPIO_ACTIVE_HIGH>; + enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + + display-height-chars = <2>; + display-width-chars = <16>; + }; diff --git a/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt b/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt new file mode 100644 index 000000000..b69bb6899 --- /dev/null +++ b/Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt @@ -0,0 +1,17 @@ +Binding for ASCII LCD displays on Imagination Technologies boards + +Required properties: +- compatible : should be one of: + "img,boston-lcd" + "mti,malta-lcd" + "mti,sead3-lcd" + +Required properties for "img,boston-lcd": +- reg : memory region locating the device registers + +Required properties for "mti,malta-lcd" or "mti,sead3-lcd": +- regmap: phandle of the system controller containing the LCD registers +- offset: offset in bytes to the LCD registers within the system controller + +The layout of the registers & properties of the display are determined +from the compatible string, making this binding somewhat trivial. |