summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/c6x/emifa.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/c6x/emifa.txt')
-rw-r--r--Documentation/devicetree/bindings/c6x/emifa.txt62
1 files changed, 62 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/c6x/emifa.txt b/Documentation/devicetree/bindings/c6x/emifa.txt
new file mode 100644
index 000000000..0ff6e9b9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/c6x/emifa.txt
@@ -0,0 +1,62 @@
+External Memory Interface
+-------------------------
+
+The emifa node describes a simple external bus controller found on some C6X
+SoCs. This interface provides external busses with a number of chip selects.
+
+Required properties:
+
+- compatible: must be "ti,c64x+emifa", "simple-bus"
+- reg: register area base and size
+- #address-cells: must be 2 (chip-select + offset)
+- #size-cells: must be 1
+- ranges: mapping from EMIFA space to parent space
+
+
+Optional properties:
+
+- ti,dscr-dev-enable: Device ID if EMIF is enabled/disabled from DSCR
+
+- ti,emifa-burst-priority:
+ Number of memory transfers after which the EMIF will elevate the priority
+ of the oldest command in the command FIFO. Setting this field to 255
+ disables this feature, thereby allowing old commands to stay in the FIFO
+ indefinitely.
+
+- ti,emifa-ce-config:
+ Configuration values for each of the supported chip selects.
+
+Example:
+
+ emifa@70000000 {
+ compatible = "ti,c64x+emifa", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x100>;
+ ranges = <0x2 0x0 0xa0000000 0x00000008
+ 0x3 0x0 0xb0000000 0x00400000
+ 0x4 0x0 0xc0000000 0x10000000
+ 0x5 0x0 0xD0000000 0x10000000>;
+
+ ti,dscr-dev-enable = <13>;
+ ti,emifa-burst-priority = <255>;
+ ti,emifa-ce-config = <0x00240120
+ 0x00240120
+ 0x00240122
+ 0x00240122>;
+
+ flash@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x3 0x0 0x400000>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0 {
+ reg = <0x0 0x400000>;
+ label = "NOR";
+ };
+ };
+ };
+
+This shows a flash chip attached to chip select 3.