summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt53
1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
new file mode 100644
index 000000000..7ccecd5c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -0,0 +1,53 @@
+* Amlogic GXBB Clock and Reset Unit
+
+The Amlogic GXBB clock controller generates and supplies clock to various
+controllers within the SoC.
+
+Required Properties:
+
+- compatible: should be:
+ "amlogic,gxbb-clkc" for GXBB SoC,
+ "amlogic,gxl-clkc" for GXL and GXM SoC,
+ "amlogic,axg-clkc" for AXG SoC.
+ "amlogic,g12a-clkc" for G12A SoC.
+ "amlogic,g12b-clkc" for G12B SoC.
+ "amlogic,sm1-clkc" for SM1 SoC.
+- clocks : list of clock phandle, one for each entry clock-names.
+- clock-names : should contain the following:
+ * "xtal": the platform xtal
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
+used in device tree sources.
+
+Parent node should have the following properties :
+- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or
+ "amlogic,meson-axg-hhi-sysctrl"
+- reg: base address and size of the HHI system control register space.
+
+Example: Clock controller node:
+
+sysctrl: system-controller@0 {
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
+ #clock-cells = <1>;
+ compatible = "amlogic,gxbb-clkc";
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ };
+};
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart_AO: serial@c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ };